[ 0.000000] Linux version 6.10.0-rc2+ (osstest@himrod1) (gcc (Debian 12.2.0-14) 12.2.0, GNU ld (GNU Binutils for Debian) 2.40) #1 SMP PREEMPT_DYNAMIC Sat Jun 8 19:09:08 UTC 2024 [ 0.000000] Command line: placeholder root=/dev/mapper/debina1--vg-root ro console=hvc0 [ 0.000000] Released 0 page(s) [ 0.000000] BIOS-provided physical RAM map: [ 0.000000] Xen: [mem 0x0000000000000000-0x0000000000099fff] usable [ 0.000000] Xen: [mem 0x000000000009ac00-0x00000000000fffff] reserved [ 0.000000] Xen: [mem 0x0000000000100000-0x0000000020065fff] usable [ 0.000000] Xen: [mem 0x00000000796ef000-0x00000000798bdfff] reserved [ 0.000000] Xen: [mem 0x00000000799b7000-0x0000000079e5afff] ACPI NVS [ 0.000000] Xen: [mem 0x0000000079e5b000-0x000000007bdb0fff] reserved [ 0.000000] Xen: [mem 0x000000007bdb2000-0x000000007be37fff] reserved [ 0.000000] Xen: [mem 0x0000000080000000-0x000000008fffffff] reserved [ 0.000000] Xen: [mem 0x00000000fbffc000-0x00000000fbffcfff] reserved [ 0.000000] Xen: [mem 0x00000000fec00000-0x00000000fec00fff] reserved [ 0.000000] Xen: [mem 0x00000000fed1c000-0x00000000fed1ffff] reserved [ 0.000000] Xen: [mem 0x00000000fee00000-0x00000000feefffff] reserved [ 0.000000] Xen: [mem 0x00000000ff000000-0x00000000ffffffff] reserved [ 0.000000] NX (Execute Disable) protection: active [ 0.000000] APIC: Static calls initialized [ 0.000000] SMBIOS 2.8 present. [ 0.000000] DMI: Supermicro SYS-5018D-FN8T/X10SDV-TP8F, BIOS 1.0b 11/21/2016 [ 0.000000] DMI: Memory slots populated: 1/4 [ 0.000000] Hypervisor detected: Xen PV [ 0.000029] Xen PV: Detected 8 vCPUS [ 0.000490] tsc: Detected 2199.998 MHz processor [ 0.000923] e820: update [mem 0x00000000-0x00000fff] usable ==> reserved [ 0.000927] e820: remove [mem 0x000a0000-0x000fffff] usable [ 0.000933] last_pfn = 0x20066 max_arch_pfn = 0x400000000 [ 0.000936] MTRR map: 2 entries (0 fixed + 2 variable; max 20), built from 10 variable MTRRs [ 0.000938] MTRRs set to read-only [ 0.000941] x86/PAT: Configuration [0-7]: WB WT UC- UC WC WP UC UC [ 0.000983] Kernel/User page tables isolation: disabled on XEN PV. [ 0.026882] RAMDISK: [mem 0x04000000-0x053a5fff] [ 0.026890] ACPI: Early table checksum verification disabled [ 0.027491] ACPI: RSDP 0x00000000000F0580 000024 (v02 SUPERM) [ 0.027502] ACPI: XSDT 0x00000000799FF0A0 0000BC (v01 SUPERM SMCI--MB 01072009 AMI 00010013) [ 0.027540] ACPI: FACP 0x0000000079A17AC8 00010C (v05 SUPERM SMCI--MB 01072009 AMI 00010013) [ 0.027588] ACPI: DSDT 0x00000000799FF1F0 0188D5 (v02 SUPERM SMCI--MB 01072009 INTL 20091013) [ 0.027604] ACPI: FACS 0x0000000079E59F80 000040 [ 0.027619] ACPI: APIC 0x0000000079A17BD8 0000BC (v03 SUPERM SMCI--MB 01072009 AMI 00010013) [ 0.027635] ACPI: FPDT 0x0000000079A17C98 000044 (v01 SUPERM SMCI--MB 01072009 AMI 00010013) [ 0.027652] ACPI: FIDT 0x0000000079A17CE0 00009C (v01 SUPERM SMCI--MB 01072009 AMI 00010013) [ 0.027667] ACPI: SPMI 0x0000000079A17D80 000040 (v05 SUPERM SMCI--MB 00000000 AMI. 00000000) [ 0.027683] ACPI: MCFG 0x0000000079A17DC0 00003C (v01 SUPERM SMCI--MB 01072009 MSFT 00000097) [ 0.027699] ACPI: UEFI 0x0000000079A17E00 000042 (v01 00000000 00000000) [ 0.027716] ACPI: DBG2 0x0000000079A17E48 000072 (v00 SUPERM SMCI--MB 00000000 INTL 20091013) [ 0.027732] ACPI: HPET 0x0000000079A17EC0 000038 (v01 SUPERM SMCI--MB 00000001 INTL 20091013) [ 0.027748] ACPI: WDDT 0x0000000079A17EF8 000040 (v01 SUPERM SMCI--MB 00000000 INTL 20091013) [ 0.027764] ACPI: SSDT 0x0000000079A17F38 00ED8B (v01 AMI PmMgt 00000001 INTL 20120913) [ 0.027780] ACPI: SSDT 0x0000000079A26CC8 002285 (v02 SUPERM SpsNm 00000002 INTL 20120913) [ 0.027796] ACPI: SSDT 0x0000000079A28F50 000064 (v02 SUPERM SpsNvs 00000002 INTL 20120913) [ 0.027812] ACPI: PRAD 0x0000000079A28FB8 000102 (v02 SUPERM SMCI--MB 00000002 INTL 20120913) [ 0.027828] ACPI: RMAD 0x0000000079A290C0 0000CC (v01 SUPERM SMCI--MB 00000001 INTL 20091013) [ 0.027844] ACPI: HEST 0x0000000079A29190 0000A8 (v01 SUPERM SMCI--MB 00000001 INTL 00000001) [ 0.027860] ACPI: BERT 0x0000000079A29238 000030 (v01 SUPERM SMCI--MB 00000001 INTL 00000001) [ 0.027876] ACPI: ERST 0x0000000079A29268 000230 (v01 SUPERM SMCI--MB 00000001 INTL 00000001) [ 0.027892] ACPI: EINJ 0x0000000079A29498 000130 (v01 SUPERM SMCI--MB 00000001 INTL 00000001) [ 0.027900] ACPI: Reserving FACP table memory at [mem 0x79a17ac8-0x79a17bd3] [ 0.027902] ACPI: Reserving DSDT table memory at [mem 0x799ff1f0-0x79a17ac4] [ 0.027903] ACPI: Reserving FACS table memory at [mem 0x79e59f80-0x79e59fbf] [ 0.027904] ACPI: Reserving APIC table memory at [mem 0x79a17bd8-0x79a17c93] [ 0.027905] ACPI: Reserving FPDT table memory at [mem 0x79a17c98-0x79a17cdb] [ 0.027906] ACPI: Reserving FIDT table memory at [mem 0x79a17ce0-0x79a17d7b] [ 0.027907] ACPI: Reserving SPMI table memory at [mem 0x79a17d80-0x79a17dbf] [ 0.027908] ACPI: Reserving MCFG table memory at [mem 0x79a17dc0-0x79a17dfb] [ 0.027909] ACPI: Reserving UEFI table memory at [mem 0x79a17e00-0x79a17e41] [ 0.027910] ACPI: Reserving DBG2 table memory at [mem 0x79a17e48-0x79a17eb9] [ 0.027911] ACPI: Reserving HPET table memory at [mem 0x79a17ec0-0x79a17ef7] [ 0.027912] ACPI: Reserving WDDT table memory at [mem 0x79a17ef8-0x79a17f37] [ 0.027913] ACPI: Reserving SSDT table memory at [mem 0x79a17f38-0x79a26cc2] [ 0.027914] ACPI: Reserving SSDT table memory at [mem 0x79a26cc8-0x79a28f4c] [ 0.027915] ACPI: Reserving SSDT table memory at [mem 0x79a28f50-0x79a28fb3] [ 0.027916] ACPI: Reserving PRAD table memory at [mem 0x79a28fb8-0x79a290b9] [ 0.027917] ACPI: Reserving RMAD table memory at [mem 0x79a290c0-0x79a2918b] [ 0.027918] ACPI: Reserving HEST table memory at [mem 0x79a29190-0x79a29237] [ 0.027918] ACPI: Reserving BERT table memory at [mem 0x79a29238-0x79a29267] [ 0.027919] ACPI: Reserving ERST table memory at [mem 0x79a29268-0x79a29497] [ 0.027920] ACPI: Reserving EINJ table memory at [mem 0x79a29498-0x79a295c7] [ 0.028028] APIC: Switched APIC routing to: Xen PV [ 0.032110] Zone ranges: [ 0.032112] DMA [mem 0x0000000000001000-0x0000000000ffffff] [ 0.032114] DMA32 [mem 0x0000000001000000-0x0000000020065fff] [ 0.032116] Normal empty [ 0.032117] Movable zone start for each node [ 0.032118] Early memory node ranges [ 0.032119] node 0: [mem 0x0000000000001000-0x0000000000099fff] [ 0.032121] node 0: [mem 0x0000000000100000-0x0000000020065fff] [ 0.032122] Initmem setup node 0 [mem 0x0000000000001000-0x0000000020065fff] [ 0.032128] On node 0, zone DMA: 1 pages in unavailable ranges [ 0.032167] On node 0, zone DMA: 102 pages in unavailable ranges [ 0.033655] On node 0, zone DMA32: 32666 pages in unavailable ranges [ 0.033661] p2m virtual area at (____ptrval____), size is 40000000 [ 0.160258] Remapped 102 page(s) [ 0.161644] ACPI: PM-Timer IO Port: 0x408 [ 0.161713] ACPI: LAPIC_NMI (acpi_id[0x00] high level lint[0x1]) [ 0.161716] ACPI: LAPIC_NMI (acpi_id[0x02] high level lint[0x1]) [ 0.161718] ACPI: LAPIC_NMI (acpi_id[0x04] high level lint[0x1]) [ 0.161720] ACPI: LAPIC_NMI (acpi_id[0x06] high level lint[0x1]) [ 0.161721] ACPI: LAPIC_NMI (acpi_id[0x01] high level lint[0x1]) [ 0.161723] ACPI: LAPIC_NMI (acpi_id[0x03] high level lint[0x1]) [ 0.161725] ACPI: LAPIC_NMI (acpi_id[0x05] high level lint[0x1]) [ 0.161726] ACPI: LAPIC_NMI (acpi_id[0x07] high level lint[0x1]) [ 0.161755] IOAPIC[0]: apic_id 8, version 32, address 0xfec00000, GSI 0-23 [ 0.161769] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl) [ 0.161772] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level) [ 0.161798] ACPI: Using ACPI (MADT) for SMP configuration information [ 0.161803] ACPI: HPET id: 0x8086a701 base: 0xfed00000 [ 0.161815] CPU topo: Max. logical packages: 1 [ 0.161816] CPU topo: Max. logical dies: 1 [ 0.161817] CPU topo: Max. dies per package: 1 [ 0.161823] CPU topo: Max. threads per core: 2 [ 0.161825] CPU topo: Num. cores per package: 4 [ 0.161825] CPU topo: Num. threads per package: 8 [ 0.161826] CPU topo: Allowing 8 present CPUs plus 0 hotplug CPUs [ 0.161840] PM: hibernation: Registered nosave memory: [mem 0x00000000-0x00000fff] [ 0.161843] PM: hibernation: Registered nosave memory: [mem 0x0009a000-0x0009afff] [ 0.161844] PM: hibernation: Registered nosave memory: [mem 0x0009b000-0x000fffff] [ 0.161846] [mem 0x90000000-0xfbffbfff] available for PCI devices [ 0.161851] Booting kernel on Xen [ 0.161852] Xen version: 4.19-unstable (preserve-AD) [ 0.161855] clocksource: refined-jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 1910969940391419 ns [ 0.168956] setup_percpu: NR_CPUS:64 nr_cpumask_bits:8 nr_cpu_ids:8 nr_node_ids:1 [ 0.169428] percpu: Embedded 57 pages/cpu s194408 r8192 d30872 u262144 [ 0.169434] pcpu-alloc: s194408 r8192 d30872 u262144 alloc=1*2097152 [ 0.169437] pcpu-alloc: [0] 0 1 2 3 4 5 6 7 [ 0.169510] xen: PV spinlocks enabled [ 0.169513] PV qspinlock hash table entries: 256 (order: 0, 4096 bytes, linear) [ 0.169516] Kernel command line: placeholder root=/dev/mapper/debina1--vg-root ro console=hvc0 [ 0.169556] Unknown kernel command line parameters "placeholder", will be passed to user space. [ 0.169567] random: crng init done [ 0.169643] Dentry cache hash table entries: 65536 (order: 7, 524288 bytes, linear) [ 0.169683] Inode-cache hash table entries: 32768 (order: 6, 262144 bytes, linear) [ 0.170999] Built 1 zonelists, mobility grouping on. Total pages: 131071 [ 0.171002] mem auto-init: stack:all(zero), heap alloc:off, heap free:off, mlocked free:off [ 0.171005] software IO TLB: area num 8. [ 0.237668] Memory: 385604K/524284K available (16384K kernel code, 2753K rwdata, 6164K rodata, 2680K init, 1864K bss, 138428K reserved, 0K cma-reserved) [ 0.237834] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=8, Nodes=1 [ 0.240447] Dynamic Preempt: voluntary [ 0.240697] rcu: Preemptible hierarchical RCU implementation. [ 0.240699] rcu: RCU event tracing is enabled. [ 0.240699] rcu: RCU restricting CPUs from NR_CPUS=64 to nr_cpu_ids=8. [ 0.240701] Trampoline variant of Tasks RCU enabled. [ 0.240702] rcu: RCU calculated value of scheduler-enlistment delay is 100 jiffies. [ 0.240703] rcu: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=8 [ 0.240738] RCU Tasks: Setting shift to 3 and lim to 1 rcu_task_cb_adjust=1. [ 0.252419] NR_IRQS: 4352, nr_irqs: 488, preallocated irqs: 16 [ 0.252573] xen:events: Using FIFO-based ABI [ 0.252600] xen: --> pirq=1 -> irq=1 (gsi=1) [ 0.252609] xen: --> pirq=2 -> irq=2 (gsi=2) [ 0.252617] xen: --> pirq=3 -> irq=3 (gsi=3) [ 0.252624] xen: --> pirq=4 -> irq=4 (gsi=4) [ 0.252632] xen: --> pirq=5 -> irq=5 (gsi=5) [ 0.252639] xen: --> pirq=6 -> irq=6 (gsi=6) [ 0.252647] xen: --> pirq=7 -> irq=7 (gsi=7) [ 0.252655] xen: --> pirq=8 -> irq=8 (gsi=8) [ 0.252662] xen: --> pirq=9 -> irq=9 (gsi=9) [ 0.252670] xen: --> pirq=10 -> irq=10 (gsi=10) [ 0.252677] xen: --> pirq=11 -> irq=11 (gsi=11) [ 0.252685] xen: --> pirq=12 -> irq=12 (gsi=12) [ 0.252693] xen: --> pirq=13 -> irq=13 (gsi=13) [ 0.252700] xen: --> pirq=14 -> irq=14 (gsi=14) [ 0.252708] xen: --> pirq=15 -> irq=15 (gsi=15) [ 0.252717] rcu: srcu_init: Setting srcu_struct sizes based on contention. [ 0.258114] Console: colour VGA+ 80x25 [ 0.258118] printk: legacy console [tty0] enabled [ 0.274473] printk: legacy console [hvc0] enabled [ 0.275851] ACPI: Core revision 20240322 [ 0.289888] clocksource: xen: mask: 0xffffffffffffffff max_cycles: 0x1cd42e4dffb, max_idle_ns: 881590591483 ns [ 0.290059] Xen: using vcpuop timer interface [ 0.290064] installing Xen timer for CPU 0 [ 0.290215] clocksource: tsc-early: mask: 0xffffffffffffffff max_cycles: 0x1fb63109b96, max_idle_ns: 440795265316 ns [ 0.290375] Calibrating delay loop (skipped), value calculated using timer frequency.. 4399.99 BogoMIPS (lpj=2199998) [ 0.290703] Last level iTLB entries: 4KB 64, 2MB 8, 4MB 8 [ 0.290821] Last level dTLB entries: 4KB 64, 2MB 0, 4MB 0, 1GB 4 [ 0.290948] Spectre V1 : Mitigation: usercopy/swapgs barriers and __user pointer sanitization [ 0.291098] Spectre V2 : Mitigation: Retpolines [ 0.291381] Spectre V2 : Spectre v2 / SpectreRSB mitigation: Filling RSB on context switch [ 0.291533] Spectre V2 : Spectre v2 / SpectreRSB : Filling RSB on VMEXIT [ 0.291654] Spectre V2 : Enabling Restricted Speculation for firmware calls [ 0.291775] Spectre V2 : mitigation: Enabling conditional Indirect Branch Prediction Barrier [ 0.291924] Spectre V2 : User space: Mitigation: STIBP via prctl [ 0.292378] Speculative Store Bypass: Mitigation: Speculative Store Bypass disabled via prctl [ 0.292531] MDS: Mitigation: Clear CPU buffers [ 0.292645] TAA: Mitigation: Clear CPU buffers [ 0.292758] MMIO Stale Data: Vulnerable: Clear CPU buffers attempted, no microcode [ 0.292923] x86/fpu: Supporting XSAVE feature 0x001: 'x87 floating point registers' [ 0.293069] x86/fpu: Supporting XSAVE feature 0x002: 'SSE registers' [ 0.293188] x86/fpu: Supporting XSAVE feature 0x004: 'AVX registers' [ 0.293308] x86/fpu: xstate_offset[2]: 576, xstate_sizes[2]: 256 [ 0.293377] x86/fpu: Enabled xstate features 0x7, context size is 832 bytes, using 'standard' format. [ 0.316096] Freeing SMP alternatives memory: 40K [ 0.316229] pid_max: default: 32768 minimum: 301 [ 0.316365] LSM: initializing lsm=capability,selinux [ 0.316489] SELinux: Initializing. [ 0.316625] Mount-cache hash table entries: 1024 (order: 1, 8192 bytes, linear) [ 0.316773] Mountpoint-cache hash table entries: 1024 (order: 1, 8192 bytes, linear) [ 0.317462] cpu 0 spinlock event irq 25 [ 0.317580] VPMU disabled by hypervisor. [ 0.318153] Performance Events: unsupported p6 CPU model 86 no PMU driver, software events only. [ 0.318308] signal: max sigframe size: 1776 [ 0.318449] rcu: Hierarchical SRCU implementation. [ 0.318565] rcu: Max phase no-delay instances is 400. [ 0.319185] smp: Bringing up secondary CPUs ... [ 0.319548] installing Xen timer for CPU 1 [ 0.320074] installing Xen timer for CPU 2 [ 0.320621] installing Xen timer for CPU 3 [ 0.038652] [Firmware Bug]: CPU 1: APIC ID mismatch. Firmware: 0x0002 APIC: 0x0001 [ 0.320890] cpu 1 spinlock event irq 45 [ 0.321536] MDS CPU bug present and SMT on, data leak possible. See https://www.kernel.org/doc/html/latest/admin-guide/hw-vuln/mds.html for more details. [ 0.322381] TAA CPU bug present and SMT on, data leak possible. See https://www.kernel.org/doc/html/latest/admin-guide/hw-vuln/tsx_async_abort.html for more details. [ 0.322571] MMIO Stale Data CPU bug present and SMT on, data leak possible. See https://www.kernel.org/doc/html/latest/admin-guide/hw-vuln/processor_mmio_stale_data.html for more details. [ 0.038652] [Firmware Bug]: CPU 2: APIC ID mismatch. Firmware: 0x0004 APIC: 0x0002 [ 0.322775] cpu 2 spinlock event irq 46 [ 0.038652] [Firmware Bug]: CPU 3: APIC ID mismatch. Firmware: 0x0006 APIC: 0x0003 [ 0.323413] cpu 3 spinlock event irq 47 [ 0.323677] installing Xen timer for CPU 4 [ 0.324706] installing Xen timer for CPU 5 [ 0.325196] installing Xen timer for CPU 6 [ 0.325609] installing Xen timer for CPU 7 [ 0.038652] [Firmware Bug]: CPU 4: APIC ID mismatch. Firmware: 0x0001 APIC: 0x0004 [ 0.325821] cpu 4 spinlock event irq 68 [ 0.038652] [Firmware Bug]: CPU 5: APIC ID mismatch. Firmware: 0x0003 APIC: 0x0005 [ 0.326417] cpu 5 spinlock event irq 69 [ 0.038652] [Firmware Bug]: CPU 6: APIC ID mismatch. Firmware: 0x0005 APIC: 0x0006 [ 0.326681] cpu 6 spinlock event irq 70 [ 0.327417] cpu 7 spinlock event irq 71 [ 0.327577] smp: Brought up 1 node, 8 CPUs [ 0.328475] devtmpfs: initialized [ 0.328527] x86/mm: Memory block size: 128MB [ 0.329402] ACPI: PM: Registering ACPI NVS region [mem 0x799b7000-0x79e5afff] (4866048 bytes) [ 0.329643] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 1911260446275000 ns [ 0.329800] futex hash table entries: 2048 (order: 5, 131072 bytes, linear) [ 0.330064] PM: RTC time: 19:25:59, date: 2024-06-08 [ 0.330386] NET: Registered PF_NETLINK/PF_ROUTE protocol family [ 0.330530] xen:grant_table: Grant tables using version 1 layout [ 0.330668] Grant table initialized [ 0.331025] audit: initializing netlink subsys (disabled) [ 0.331161] audit: type=2000 audit(1717874759.588:1): state=initialized audit_enabled=0 res=1 [ 0.331429] thermal_sys: Registered thermal governor 'step_wise' [ 0.331432] thermal_sys: Registered thermal governor 'user_space' [ 0.331585] ACPI FADT declares the system doesn't support PCIe ASPM, so disable it [ 0.332051] PCI: ECAM [mem 0x80000000-0x8fffffff] (base 0x80000000) for domain 0000 [bus 00-ff] [ 0.465546] PCI: Using configuration type 1 for base access [ 0.465732] kprobes: kprobe jump-optimization is enabled. All kprobes are optimized if possible. [ 0.466441] ACPI: Added _OSI(Module Device) [ 0.466563] ACPI: Added _OSI(Processor Device) [ 0.466677] ACPI: Added _OSI(3.0 _SCP Extensions) [ 0.466791] ACPI: Added _OSI(Processor Aggregator Device) [ 0.495003] ACPI: 4 ACPI AML tables successfully acquired and loaded [ 0.497158] xen: registering gsi 9 triggering 0 polarity 0 [ 0.499644] ACPI: Dynamic OEM Table Load: [ 0.503810] ACPI: _OSC evaluated successfully for all CPUs [ 0.504136] ACPI: Interpreter enabled [ 0.504262] ACPI: PM: (supports S0 S4 S5) [ 0.504380] ACPI: Using IOAPIC for interrupt routing [ 0.504536] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug [ 0.504687] PCI: Using E820 reservations for host bridge windows [ 0.505261] ACPI: Enabled 6 GPEs in block 00 to 3F [ 0.530748] ACPI: PCI Root Bridge [UNC0] (domain 0000 [bus ff]) [ 0.530878] acpi PNP0A03:03: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI HPX-Type3] [ 0.531111] acpi PNP0A03:03: _OSC: platform does not support [LTR] [ 0.531378] acpi PNP0A03:03: _OSC: OS now controls [PME PCIeCapability] [ 0.531500] acpi PNP0A03:03: FADT indicates ASPM is unsupported, using BIOS configuration [ 0.531679] PCI host bridge to bus 0000:ff [ 0.531799] pci_bus 0000:ff: root bus resource [bus ff] [ 0.531994] pci 0000:ff:0b.0: [8086:6f81] type 00 class 0x088000 conventional PCI endpoint [ 0.532484] pci 0000:ff:0b.1: [8086:6f36] type 00 class 0x110100 conventional PCI endpoint [ 0.532945] pci 0000:ff:0b.2: [8086:6f37] type 00 class 0x110100 conventional PCI endpoint [ 0.533425] pci 0000:ff:0b.3: [8086:6f76] type 00 class 0x088000 conventional PCI endpoint [ 0.533902] pci 0000:ff:0c.0: [8086:6fe0] type 00 class 0x088000 conventional PCI endpoint [ 0.534360] pci 0000:ff:0c.1: [8086:6fe1] type 00 class 0x088000 conventional PCI endpoint [ 0.534830] pci 0000:ff:0c.2: [8086:6fe2] type 00 class 0x088000 conventional PCI endpoint [ 0.535286] pci 0000:ff:0c.3: [8086:6fe3] type 00 class 0x088000 conventional PCI endpoint [ 0.535715] pci 0000:ff:0f.0: [8086:6ff8] type 00 class 0x088000 conventional PCI endpoint [ 0.536186] pci 0000:ff:0f.4: [8086:6ffc] type 00 class 0x088000 conventional PCI endpoint [ 0.536658] pci 0000:ff:0f.5: [8086:6ffd] type 00 class 0x088000 conventional PCI endpoint [ 0.537113] pci 0000:ff:0f.6: [8086:6ffe] type 00 class 0x088000 conventional PCI endpoint [ 0.537597] pci 0000:ff:10.0: [8086:6f1d] type 00 class 0x088000 conventional PCI endpoint [ 0.538052] pci 0000:ff:10.1: [8086:6f34] type 00 class 0x110100 conventional PCI endpoint [ 0.538560] pci 0000:ff:10.5: [8086:6f1e] type 00 class 0x088000 conventional PCI endpoint [ 0.539015] pci 0000:ff:10.6: [8086:6f7d] type 00 class 0x110100 conventional PCI endpoint [ 0.539483] pci 0000:ff:10.7: [8086:6f1f] type 00 class 0x088000 conventional PCI endpoint [ 0.539954] pci 0000:ff:12.0: [8086:6fa0] type 00 class 0x088000 conventional PCI endpoint [ 0.540240] pci 0000:ff:12.1: [8086:6f30] type 00 class 0x110100 conventional PCI endpoint [ 0.540727] pci 0000:ff:13.0: [8086:6fa8] type 00 class 0x088000 conventional PCI endpoint [ 0.541233] pci 0000:ff:13.1: [8086:6f71] type 00 class 0x088000 conventional PCI endpoint [ 0.541732] pci 0000:ff:13.2: [8086:6faa] type 00 class 0x088000 conventional PCI endpoint [ 0.542232] pci 0000:ff:13.3: [8086:6fab] type 00 class 0x088000 conventional PCI endpoint [ 0.542734] pci 0000:ff:13.4: [8086:6fac] type 00 class 0x088000 conventional PCI endpoint [ 0.543234] pci 0000:ff:13.5: [8086:6fad] type 00 class 0x088000 conventional PCI endpoint [ 0.543724] pci 0000:ff:13.6: [8086:6fae] type 00 class 0x088000 conventional PCI endpoint [ 0.544182] pci 0000:ff:13.7: [8086:6faf] type 00 class 0x088000 conventional PCI endpoint [ 0.544657] pci 0000:ff:14.0: [8086:6fb0] type 00 class 0x088000 conventional PCI endpoint [ 0.545159] pci 0000:ff:14.1: [8086:6fb1] type 00 class 0x088000 conventional PCI endpoint [ 0.545676] pci 0000:ff:14.2: [8086:6fb2] type 00 class 0x088000 conventional PCI endpoint [ 0.546176] pci 0000:ff:14.3: [8086:6fb3] type 00 class 0x088000 conventional PCI endpoint [ 0.546714] pci 0000:ff:14.4: [8086:6fbc] type 00 class 0x088000 conventional PCI endpoint [ 0.547172] pci 0000:ff:14.5: [8086:6fbd] type 00 class 0x088000 conventional PCI endpoint [ 0.547644] pci 0000:ff:14.6: [8086:6fbe] type 00 class 0x088000 conventional PCI endpoint [ 0.548101] pci 0000:ff:14.7: [8086:6fbf] type 00 class 0x088000 conventional PCI endpoint [ 0.548705] pci 0000:ff:15.0: [8086:6fb4] type 00 class 0x088000 conventional PCI endpoint [ 0.549206] pci 0000:ff:15.1: [8086:6fb5] type 00 class 0x088000 conventional PCI endpoint [ 0.549710] pci 0000:ff:15.2: [8086:6fb6] type 00 class 0x088000 conventional PCI endpoint [ 0.550216] pci 0000:ff:15.3: [8086:6fb7] type 00 class 0x088000 conventional PCI endpoint [ 0.550778] pci 0000:ff:1e.0: [8086:6f98] type 00 class 0x088000 conventional PCI endpoint [ 0.551235] pci 0000:ff:1e.1: [8086:6f99] type 00 class 0x088000 conventional PCI endpoint [ 0.551689] pci 0000:ff:1e.2: [8086:6f9a] type 00 class 0x088000 conventional PCI endpoint [ 0.552150] pci 0000:ff:1e.3: [8086:6fc0] type 00 class 0x088000 conventional PCI endpoint [ 0.552446] pci 0000:ff:1e.4: [8086:6f9c] type 00 class 0x088000 conventional PCI endpoint [ 0.552922] pci 0000:ff:1f.0: [8086:6f88] type 00 class 0x088000 conventional PCI endpoint [ 0.553397] pci 0000:ff:1f.2: [8086:6f8a] type 00 class 0x088000 conventional PCI endpoint [ 0.553859] pci_bus 0000:ff: on NUMA node 0 [ 0.558152] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-fe]) [ 0.558281] acpi PNP0A08:00: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI HPX-Type3] [ 0.558503] acpi PNP0A08:00: _OSC: platform does not support [PME LTR] [ 0.558840] acpi PNP0A08:00: _OSC: OS now controls [PCIeCapability] [ 0.558961] acpi PNP0A08:00: FADT indicates ASPM is unsupported, using BIOS configuration [ 0.559488] PCI host bridge to bus 0000:00 [ 0.559604] pci_bus 0000:00: root bus resource [io 0x0000-0x0cf7 window] [ 0.559726] pci_bus 0000:00: root bus resource [io 0x1000-0xffff window] [ 0.559846] pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff window] [ 0.559992] pci_bus 0000:00: root bus resource [mem 0x90000000-0xfbffbfff window] [ 0.560137] pci_bus 0000:00: root bus resource [bus 00-fe] [ 0.560326] pci 0000:00:00.0: [8086:6f00] type 00 class 0x060000 PCIe Root Port [ 0.560921] pci 0000:00:01.0: [8086:6f02] type 01 class 0x060400 PCIe Root Port [ 0.561226] pci 0000:00:01.0: PCI bridge to [bus 01] [ 0.561655] pci 0000:00:01.0: PME# supported from D0 D3hot D3cold [ 0.562039] pci 0000:00:01.1: [8086:6f03] type 01 class 0x060400 PCIe Root Port [ 0.562384] pci 0000:00:01.1: PCI bridge to [bus 02] [ 0.562800] pci 0000:00:01.1: PME# supported from D0 D3hot D3cold [ 0.563204] pci 0000:00:02.0: [8086:6f04] type 01 class 0x060400 PCIe Root Port [ 0.563516] pci 0000:00:02.0: PCI bridge to [bus 03] [ 0.563655] pci 0000:00:02.0: bridge window [mem 0xfb500000-0xfb5fffff] [ 0.564049] pci 0000:00:02.0: PME# supported from D0 D3hot D3cold [ 0.564429] pci 0000:00:02.2: [8086:6f06] type 01 class 0x060400 PCIe Root Port [ 0.564730] pci 0000:00:02.2: PCI bridge to [bus 04] [ 0.564877] pci 0000:00:02.2: bridge window [mem 0xfb400000-0xfb4fffff] [ 0.565042] pci 0000:00:02.2: bridge window [mem 0xfba00000-0xfbefffff 64bit pref] [ 0.565427] pci 0000:00:02.2: PME# supported from D0 D3hot D3cold [ 0.565821] pci 0000:00:03.0: [8086:6f08] type 01 class 0x060400 PCIe Root Port [ 0.566121] pci 0000:00:03.0: PCI bridge to [bus 05] [ 0.566555] pci 0000:00:03.0: PME# supported from D0 D3hot D3cold [ 0.566938] pci 0000:00:03.2: [8086:6f0a] type 01 class 0x060400 PCIe Root Port [ 0.567240] pci 0000:00:03.2: PCI bridge to [bus 06] [ 0.567668] pci 0000:00:03.2: PME# supported from D0 D3hot D3cold [ 0.568050] pci 0000:00:05.0: [8086:6f28] type 00 class 0x088000 PCIe Root Complex Integrated Endpoint [ 0.568679] pci 0000:00:05.1: [8086:6f29] type 00 class 0x088000 PCIe Root Complex Integrated Endpoint [ 0.569367] pci 0000:00:05.2: [8086:6f2a] type 00 class 0x088000 PCIe Root Complex Integrated Endpoint [ 0.570071] pci 0000:00:14.0: [8086:8c31] type 00 class 0x0c0330 conventional PCI endpoint [ 0.570333] pci 0000:00:14.0: BAR 0 [mem 0xfb600000-0xfb60ffff 64bit] [ 0.570720] pci 0000:00:14.0: PME# supported from D3hot D3cold [ 0.571074] pci 0000:00:16.0: [8086:8c3a] type 00 class 0x078000 conventional PCI endpoint [ 0.571330] pci 0000:00:16.0: BAR 0 [mem 0xfb617000-0xfb61700f 64bit] [ 0.571726] pci 0000:00:16.0: PME# supported from D0 D3hot D3cold [ 0.572036] pci 0000:00:16.1: [8086:8c3b] type 00 class 0x078000 conventional PCI endpoint [ 0.572289] pci 0000:00:16.1: BAR 0 [mem 0xfb616000-0xfb61600f 64bit] [ 0.572721] pci 0000:00:16.1: PME# supported from D0 D3hot D3cold [ 0.573091] pci 0000:00:1a.0: [8086:8c2d] type 00 class 0x0c0320 conventional PCI endpoint [ 0.573328] pci 0000:00:1a.0: BAR 0 [mem 0xfb614000-0xfb6143ff] [ 0.573794] pci 0000:00:1a.0: PME# supported from D0 D3hot D3cold [ 0.574139] pci 0000:00:1c.0: [8086:8c10] type 01 class 0x060400 PCIe Root Port [ 0.574483] pci 0000:00:1c.0: PCI bridge to [bus 07] [ 0.574614] pci 0000:00:1c.0: bridge window [io 0xe000-0xefff] [ 0.574743] pci 0000:00:1c.0: bridge window [mem 0xfb300000-0xfb3fffff] [ 0.575171] pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold [ 0.575378] pci 0000:00:1c.0: Enabling MPC IRBNCE [ 0.575501] pci 0000:00:1c.0: Intel PCH root port ACS workaround enabled [ 0.575811] pci 0000:00:1c.1: [8086:8c12] type 01 class 0x060400 PCIe Root Port [ 0.576132] pci 0000:00:1c.1: PCI bridge to [bus 08] [ 0.576263] pci 0000:00:1c.1: bridge window [io 0xd000-0xdfff] [ 0.576388] pci 0000:00:1c.1: bridge window [mem 0xfb200000-0xfb2fffff] [ 0.576814] pci 0000:00:1c.1: PME# supported from D0 D3hot D3cold [ 0.577019] pci 0000:00:1c.1: Enabling MPC IRBNCE [ 0.577152] pci 0000:00:1c.1: Intel PCH root port ACS workaround enabled [ 0.577464] pci 0000:00:1c.3: [8086:8c16] type 01 class 0x060400 PCIe Root Port [ 0.577773] pci 0000:00:1c.3: PCI bridge to [bus 09-0a] [ 0.577904] pci 0000:00:1c.3: bridge window [io 0xc000-0xcfff] [ 0.578034] pci 0000:00:1c.3: bridge window [mem 0xfa000000-0xfb0fffff] [ 0.578476] pci 0000:00:1c.3: PME# supported from D0 D3hot D3cold [ 0.578678] pci 0000:00:1c.3: Enabling MPC IRBNCE [ 0.578801] pci 0000:00:1c.3: Intel PCH root port ACS workaround enabled [ 0.579114] pci 0000:00:1c.4: [8086:8c18] type 01 class 0x060400 PCIe Root Port [ 0.579424] pci 0000:00:1c.4: PCI bridge to [bus 0b] [ 0.579555] pci 0000:00:1c.4: bridge window [io 0xb000-0xbfff] [ 0.579687] pci 0000:00:1c.4: bridge window [mem 0xfb100000-0xfb1fffff] [ 0.580133] pci 0000:00:1c.4: PME# supported from D0 D3hot D3cold [ 0.580331] pci 0000:00:1c.4: Enabling MPC IRBNCE [ 0.580386] pci 0000:00:1c.4: Intel PCH root port ACS workaround enabled [ 0.580720] pci 0000:00:1d.0: [8086:8c26] type 00 class 0x0c0320 conventional PCI endpoint [ 0.580947] pci 0000:00:1d.0: BAR 0 [mem 0xfb613000-0xfb6133ff] [ 0.581503] pci 0000:00:1d.0: PME# supported from D0 D3hot D3cold [ 0.581833] pci 0000:00:1f.0: [8086:8c54] type 00 class 0x060100 conventional PCI endpoint [ 0.582641] pci 0000:00:1f.2: [8086:8c02] type 00 class 0x010601 conventional PCI endpoint [ 0.582865] pci 0000:00:1f.2: BAR 0 [io 0xf070-0xf077] [ 0.583033] pci 0000:00:1f.2: BAR 1 [io 0xf060-0xf063] [ 0.583191] pci 0000:00:1f.2: BAR 2 [io 0xf050-0xf057] [ 0.583348] pci 0000:00:1f.2: BAR 3 [io 0xf040-0xf043] [ 0.583419] pci 0000:00:1f.2: BAR 4 [io 0xf020-0xf03f] [ 0.583576] pci 0000:00:1f.2: BAR 5 [mem 0xfb612000-0xfb6127ff] [ 0.583895] pci 0000:00:1f.2: PME# supported from D3hot [ 0.584197] pci 0000:00:1f.3: [8086:8c22] type 00 class 0x0c0500 conventional PCI endpoint [ 0.584448] pci 0000:00:1f.3: BAR 0 [mem 0xfb611000-0xfb6110ff 64bit] [ 0.584693] pci 0000:00:1f.3: BAR 4 [io 0xf000-0xf01f] [ 0.585101] pci 0000:00:1f.6: [8086:8c24] type 00 class 0x118000 conventional PCI endpoint [ 0.585349] pci 0000:00:1f.6: BAR 0 [mem 0xfb610000-0xfb610fff 64bit] [ 0.585996] pci 0000:00:01.0: PCI bridge to [bus 01] [ 0.586298] pci 0000:00:01.1: PCI bridge to [bus 02] [ 0.586610] pci 0000:03:00.0: [8086:6f50] type 00 class 0x088000 PCIe Endpoint [ 0.586859] pci 0000:03:00.0: BAR 0 [mem 0xfb506000-0xfb507fff 64bit] [ 0.587634] pci 0000:03:00.1: [8086:6f51] type 00 class 0x088000 PCIe Endpoint [ 0.587899] pci 0000:03:00.1: BAR 0 [mem 0xfb504000-0xfb505fff 64bit] [ 0.588634] pci 0000:03:00.2: [8086:6f52] type 00 class 0x088000 PCIe Endpoint [ 0.588885] pci 0000:03:00.2: BAR 0 [mem 0xfb502000-0xfb503fff 64bit] [ 0.589615] pci 0000:03:00.3: [8086:6f53] type 00 class 0x088000 PCIe Endpoint [ 0.589867] pci 0000:03:00.3: BAR 0 [mem 0xfb500000-0xfb501fff 64bit] [ 0.590579] pci 0000:00:02.0: PCI bridge to [bus 03] [ 0.590960] pci 0000:04:00.0: [8086:15ac] type 00 class 0x020000 PCIe Endpoint [ 0.591200] pci 0000:04:00.0: BAR 0 [mem 0xfbc00000-0xfbdfffff 64bit pref] [ 0.591463] pci 0000:04:00.0: BAR 4 [mem 0xfbe04000-0xfbe07fff 64bit pref] [ 0.591625] pci 0000:04:00.0: ROM [mem 0xfb480000-0xfb4fffff pref] [ 0.591991] pci 0000:04:00.0: PME# supported from D0 D3hot D3cold [ 0.592215] pci 0000:04:00.0: VF BAR 0 [mem 0x00000000-0x00003fff 64bit] [ 0.592336] pci 0000:04:00.0: VF BAR 0 [mem 0x00000000-0x000fffff 64bit]: contains BAR 0 for 64 VFs [ 0.592428] pci 0000:04:00.0: VF BAR 3 [mem 0x00000000-0x00003fff 64bit] [ 0.592549] pci 0000:04:00.0: VF BAR 3 [mem 0x00000000-0x000fffff 64bit]: contains BAR 3 for 64 VFs [ 0.593142] pci 0000:04:00.1: [8086:15ac] type 00 class 0x020000 PCIe Endpoint [ 0.593385] pci 0000:04:00.1: BAR 0 [mem 0xfba00000-0xfbbfffff 64bit pref] [ 0.593647] pci 0000:04:00.1: BAR 4 [mem 0xfbe00000-0xfbe03fff 64bit pref] [ 0.593812] pci 0000:04:00.1: ROM [mem 0xfb400000-0xfb47ffff pref] [ 0.594163] pci 0000:04:00.1: PME# supported from D0 D3hot D3cold [ 0.594367] pci 0000:04:00.1: VF BAR 0 [mem 0x00000000-0x00003fff 64bit] [ 0.594489] pci 0000:04:00.1: VF BAR 0 [mem 0x00000000-0x000fffff 64bit]: contains BAR 0 for 64 VFs [ 0.594700] pci 0000:04:00.1: VF BAR 3 [mem 0x00000000-0x00003fff 64bit] [ 0.595377] pci 0000:04:00.1: VF BAR 3 [mem 0x00000000-0x000fffff 64bit]: contains BAR 3 for 64 VFs [ 0.595943] pci 0000:00:02.2: PCI bridge to [bus 04] [ 0.596250] pci 0000:00:03.0: PCI bridge to [bus 05] [ 0.596555] pci 0000:00:03.2: PCI bridge to [bus 06] [ 0.596941] pci 0000:07:00.0: working around ROM BAR overlap defect [ 0.597062] pci 0000:07:00.0: [8086:1533] type 00 class 0x020000 PCIe Endpoint [ 0.597303] pci 0000:07:00.0: BAR 0 [mem 0xfb300000-0xfb37ffff] [ 0.597475] pci 0000:07:00.0: BAR 2 [io 0xe000-0xe01f] [ 0.597640] pci 0000:07:00.0: BAR 3 [mem 0xfb380000-0xfb383fff] [ 0.598194] pci 0000:07:00.0: PME# supported from D0 D3hot D3cold [ 0.598670] pci 0000:00:1c.0: PCI bridge to [bus 07] [ 0.599055] pci 0000:08:00.0: working around ROM BAR overlap defect [ 0.599180] pci 0000:08:00.0: [8086:1533] type 00 class 0x020000 PCIe Endpoint [ 0.599421] pci 0000:08:00.0: BAR 0 [mem 0xfb200000-0xfb27ffff] [ 0.599638] pci 0000:08:00.0: BAR 2 [io 0xd000-0xd01f] [ 0.599802] pci 0000:08:00.0: BAR 3 [mem 0xfb280000-0xfb283fff] [ 0.600349] pci 0000:08:00.0: PME# supported from D0 D3hot D3cold [ 0.600731] pci 0000:00:1c.1: PCI bridge to [bus 08] [ 0.601112] pci 0000:09:00.0: [1a03:1150] type 01 class 0x060400 PCIe to PCI/PCI-X bridge [ 0.601438] pci 0000:09:00.0: PCI bridge to [bus 0a] [ 0.601581] pci 0000:09:00.0: bridge window [io 0xc000-0xcfff] [ 0.601712] pci 0000:09:00.0: bridge window [mem 0xfa000000-0xfb0fffff] [ 0.601954] pci 0000:09:00.0: enabling Extended Tags [ 0.602305] pci 0000:09:00.0: supports D1 D2 [ 0.602377] pci 0000:09:00.0: PME# supported from D0 D1 D2 D3hot D3cold [ 0.602746] pci 0000:00:1c.3: PCI bridge to [bus 09-0a] [ 0.603076] pci_bus 0000:0a: extended config space not accessible [ 0.603250] pci 0000:0a:00.0: [1a03:2000] type 00 class 0x030000 conventional PCI endpoint [ 0.603465] pci 0000:0a:00.0: BAR 0 [mem 0xfa000000-0xfaffffff] [ 0.603632] pci 0000:0a:00.0: BAR 1 [mem 0xfb000000-0xfb01ffff] [ 0.603799] pci 0000:0a:00.0: BAR 2 [io 0xc000-0xc07f] [ 0.604164] pci 0000:0a:00.0: Video device with shadowed ROM at [mem 0x000c0000-0x000dffff] [ 0.604457] pci 0000:0a:00.0: supports D1 D2 [ 0.604572] pci 0000:0a:00.0: PME# supported from D0 D1 D2 D3hot D3cold [ 0.605037] pci 0000:09:00.0: PCI bridge to [bus 0a] [ 0.605486] pci 0000:0b:00.0: [8086:1521] type 00 class 0x020000 PCIe Endpoint [ 0.605714] pci 0000:0b:00.0: BAR 0 [mem 0xfb160000-0xfb17ffff] [ 0.605923] pci 0000:0b:00.0: BAR 2 [io 0xb060-0xb07f] [ 0.606095] pci 0000:0b:00.0: BAR 3 [mem 0xfb18c000-0xfb18ffff] [ 0.606621] pci 0000:0b:00.0: PME# supported from D0 D3hot D3cold [ 0.606858] pci 0000:0b:00.0: VF BAR 0 [mem 0x00000000-0x00003fff 64bit pref] [ 0.606985] pci 0000:0b:00.0: VF BAR 0 [mem 0x00000000-0x0001ffff 64bit pref]: contains BAR 0 for 8 VFs [ 0.607209] pci 0000:0b:00.0: VF BAR 3 [mem 0x00000000-0x00003fff 64bit pref] [ 0.607332] pci 0000:0b:00.0: VF BAR 3 [mem 0x00000000-0x0001ffff 64bit pref]: contains BAR 3 for 8 VFs [ 0.607800] pci 0000:0b:00.1: [8086:1521] type 00 class 0x020000 PCIe Endpoint [ 0.608035] pci 0000:0b:00.1: BAR 0 [mem 0xfb140000-0xfb15ffff] [ 0.608245] pci 0000:0b:00.1: BAR 2 [io 0xb040-0xb05f] [ 0.608405] pci 0000:0b:00.1: BAR 3 [mem 0xfb188000-0xfb18bfff] [ 0.608938] pci 0000:0b:00.1: PME# supported from D0 D3hot D3cold [ 0.609168] pci 0000:0b:00.1: VF BAR 0 [mem 0x00000000-0x00003fff 64bit pref] [ 0.609292] pci 0000:0b:00.1: VF BAR 0 [mem 0x00000000-0x0001ffff 64bit pref]: contains BAR 0 for 8 VFs [ 0.609442] pci 0000:0b:00.1: VF BAR 3 [mem 0x00000000-0x00003fff 64bit pref] [ 0.609565] pci 0000:0b:00.1: VF BAR 3 [mem 0x00000000-0x0001ffff 64bit pref]: contains BAR 3 for 8 VFs [ 0.610130] pci 0000:0b:00.2: [8086:1521] type 00 class 0x020000 PCIe Endpoint [ 0.610358] pci 0000:0b:00.2: BAR 0 [mem 0xfb120000-0xfb13ffff] [ 0.610468] pci 0000:0b:00.2: BAR 2 [io 0xb020-0xb03f] [ 0.610629] pci 0000:0b:00.2: BAR 3 [mem 0xfb184000-0xfb187fff] [ 0.611157] pci 0000:0b:00.2: PME# supported from D0 D3hot D3cold [ 0.611397] pci 0000:0b:00.2: VF BAR 0 [mem 0x00000000-0x00003fff 64bit pref] [ 0.611521] pci 0000:0b:00.2: VF BAR 0 [mem 0x00000000-0x0001ffff 64bit pref]: contains BAR 0 for 8 VFs [ 0.611745] pci 0000:0b:00.2: VF BAR 3 [mem 0x00000000-0x00003fff 64bit pref] [ 0.611869] pci 0000:0b:00.2: VF BAR 3 [mem 0x00000000-0x0001ffff 64bit pref]: contains BAR 3 for 8 VFs [ 0.612405] pci 0000:0b:00.3: [8086:1521] type 00 class 0x020000 PCIe Endpoint [ 0.612637] pci 0000:0b:00.3: BAR 0 [mem 0xfb100000-0xfb11ffff] [ 0.612856] pci 0000:0b:00.3: BAR 2 [io 0xb000-0xb01f] [ 0.613017] pci 0000:0b:00.3: BAR 3 [mem 0xfb180000-0xfb183fff] [ 0.613535] pci 0000:0b:00.3: PME# supported from D0 D3hot D3cold [ 0.613775] pci 0000:0b:00.3: VF BAR 0 [mem 0x00000000-0x00003fff 64bit pref] [ 0.613899] pci 0000:0b:00.3: VF BAR 0 [mem 0x00000000-0x0001ffff 64bit pref]: contains BAR 0 for 8 VFs [ 0.614118] pci 0000:0b:00.3: VF BAR 3 [mem 0x00000000-0x00003fff 64bit pref] [ 0.614241] pci 0000:0b:00.3: VF BAR 3 [mem 0x00000000-0x0001ffff 64bit pref]: contains BAR 3 for 8 VFs [ 0.614824] pci 0000:00:1c.4: PCI bridge to [bus 0b] [ 0.614980] pci 0000:00:1c.4: bridge has subordinate 0b but max busn 0c [ 0.615524] pci_bus 0000:00: on NUMA node 0 [ 0.615624] xen: registering gsi 13 triggering 1 polarity 0 [ 0.616585] ACPI: PCI: Interrupt link LNKA configured for IRQ 11 [ 0.616807] ACPI: PCI: Interrupt link LNKB configured for IRQ 10 [ 0.616998] ACPI: PCI: Interrupt link LNKC configured for IRQ 5 [ 0.617186] ACPI: PCI: Interrupt link LNKD configured for IRQ 11 [ 0.617380] ACPI: PCI: Interrupt link LNKE configured for IRQ 0 [ 0.617500] ACPI: PCI: Interrupt link LNKE disabled [ 0.617684] ACPI: PCI: Interrupt link LNKF configured for IRQ 0 [ 0.617806] ACPI: PCI: Interrupt link LNKF disabled [ 0.617993] ACPI: PCI: Interrupt link LNKG configured for IRQ 0 [ 0.618118] ACPI: PCI: Interrupt link LNKG disabled [ 0.618301] ACPI: PCI: Interrupt link LNKH configured for IRQ 0 [ 0.618377] ACPI: PCI: Interrupt link LNKH disabled [ 0.618647] xen:balloon: Initialising balloon driver [ 0.618793] iommu: Default domain type: Translated [ 0.618793] iommu: DMA domain TLB invalidation policy: lazy mode [ 0.618793] SCSI subsystem initialized [ 0.619416] libata version 3.00 loaded. [ 0.619422] ACPI: bus type USB registered [ 0.619562] usbcore: registered new interface driver usbfs [ 0.619686] usbcore: registered new interface driver hub [ 0.619807] usbcore: registered new device driver usb [ 0.619936] pps_core: LinuxPPS API ver. 1 registered [ 0.620051] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti [ 0.620203] PTP clock support registered [ 0.620428] Advanced Linux Sound Architecture Driver Initialized. [ 0.620773] NetLabel: Initializing [ 0.620886] NetLabel: domain hash size = 128 [ 0.621000] NetLabel: protocols = UNLABELED CIPSOv4 CALIPSO [ 0.621132] NetLabel: unlabeled traffic allowed by default [ 0.621417] PCI: Using ACPI for IRQ routing [ 0.658243] PCI: pci_cache_line_size set to 64 bytes [ 0.659033] e820: reserve RAM buffer [mem 0x0009a000-0x0009ffff] [ 0.659036] e820: reserve RAM buffer [mem 0x20066000-0x23ffffff] [ 0.659062] pci 0000:0a:00.0: vgaarb: setting as boot VGA device [ 0.659062] pci 0000:0a:00.0: vgaarb: bridge control possible [ 0.659062] pci 0000:0a:00.0: vgaarb: VGA device added: decodes=io+mem,owns=io+mem,locks=none [ 0.659379] vgaarb: loaded [ 0.659799] clocksource: Switched to clocksource tsc-early [ 0.660028] VFS: Disk quotas dquot_6.6.0 [ 0.660147] VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes) [ 0.660301] hugetlbfs: disabling because there are no supported hugepage sizes [ 0.660301] pnp: PnP ACPI init [ 0.660532] xen: registering gsi 8 triggering 1 polarity 0 [ 0.660674] system 00:01: [io 0x0500-0x057f] has been reserved [ 0.660799] system 00:01: [io 0x0400-0x047f] has been reserved [ 0.660918] system 00:01: [io 0x0580-0x059f] has been reserved [ 0.661037] system 00:01: [io 0x0600-0x061f] has been reserved [ 0.661053] system 00:01: [io 0x0880-0x0883] has been reserved [ 0.661053] system 00:01: [io 0x0800-0x081f] has been reserved [ 0.661423] system 00:01: [mem 0xfed1c000-0xfed3ffff] could not be reserved [ 0.661546] system 00:01: [mem 0xfed45000-0xfed8bfff] has been reserved [ 0.661667] system 00:01: [mem 0xff000000-0xffffffff] has been reserved [ 0.661787] system 00:01: [mem 0xfee00000-0xfeefffff] has been reserved [ 0.661908] system 00:01: [mem 0xfed12000-0xfed1200f] has been reserved [ 0.662028] system 00:01: [mem 0xfed12010-0xfed1201f] has been reserved [ 0.662148] system 00:01: [mem 0xfed1b000-0xfed1bfff] has been reserved [ 0.662566] system 00:02: [io 0x0a00-0x0a0f] has been reserved [ 0.662689] system 00:02: [io 0x0a10-0x0a1f] has been reserved [ 0.662840] system 00:02: [io 0x0a20-0x0a2f] has been reserved [ 0.662959] system 00:02: [io 0x0a30-0x0a3f] has been reserved [ 0.663077] system 00:02: [io 0x0a40-0x0a4f] has been reserved [ 0.663500] xen: registering gsi 4 triggering 1 polarity 0 [ 0.663504] Already setup the GSI :4 [ 0.663617] pnp 00:03: [dma 0 disabled] [ 0.663922] xen: registering gsi 3 triggering 1 polarity 0 [ 0.663933] pnp 00:04: [dma 0 disabled] [ 0.664500] pnp: PnP ACPI: found 5 devices [ 0.696247] PM-Timer failed consistency check (0xffffff) - aborting. [ 0.696452] NET: Registered PF_INET protocol family [ 0.696605] IP idents hash table entries: 8192 (order: 4, 65536 bytes, linear) [ 0.696966] tcp_listen_portaddr_hash hash table entries: 256 (order: 0, 4096 bytes, linear) [ 0.697119] Table-perturb hash table entries: 65536 (order: 6, 262144 bytes, linear) [ 0.697266] TCP established hash table entries: 4096 (order: 3, 32768 bytes, linear) [ 0.697488] TCP bind hash table entries: 4096 (order: 5, 131072 bytes, linear) [ 0.697688] TCP: Hash tables configured (established 4096 bind 4096) [ 0.697852] UDP hash table entries: 256 (order: 1, 8192 bytes, linear) [ 0.697976] UDP-Lite hash table entries: 256 (order: 1, 8192 bytes, linear) [ 0.698127] NET: Registered PF_UNIX/PF_LOCAL protocol family [ 0.698533] RPC: Registered named UNIX socket transport module. [ 0.698656] RPC: Registered udp transport module. [ 0.698770] RPC: Registered tcp transport module. [ 0.698916] RPC: Registered tcp-with-tls transport module. [ 0.699033] RPC: Registered tcp NFSv4.1 backchannel transport module. [ 0.699619] pci 0000:00:1c.4: bridge window [mem 0x00100000-0x000fffff 64bit pref] to [bus 0b] add_size 100000 add_align 100000 [ 0.699790] pci 0000:00:1c.4: bridge window [mem 0x90000000-0x900fffff 64bit pref]: assigned [ 0.699941] pci 0000:00:01.0: PCI bridge to [bus 01] [ 0.700117] pci 0000:00:01.1: PCI bridge to [bus 02] [ 0.700297] pci 0000:00:02.0: PCI bridge to [bus 03] [ 0.701538] pci 0000:00:02.0: bridge window [mem 0xfb500000-0xfb5fffff] [ 0.701716] pci 0000:04:00.0: VF BAR 0 [mem size 0x00100000 64bit]: can't assign; no space [ 0.701864] pci 0000:04:00.0: VF BAR 0 [mem size 0x00100000 64bit]: failed to assign [ 0.702012] pci 0000:04:00.0: VF BAR 3 [mem size 0x00100000 64bit]: can't assign; no space [ 0.702159] pci 0000:04:00.0: VF BAR 3 [mem size 0x00100000 64bit]: failed to assign [ 0.702304] pci 0000:04:00.1: VF BAR 0 [mem size 0x00100000 64bit]: can't assign; no space [ 0.702471] pci 0000:04:00.1: VF BAR 0 [mem size 0x00100000 64bit]: failed to assign [ 0.702617] pci 0000:04:00.1: VF BAR 3 [mem size 0x00100000 64bit]: can't assign; no space [ 0.702764] pci 0000:04:00.1: VF BAR 3 [mem size 0x00100000 64bit]: failed to assign [ 0.702911] pci 0000:04:00.0: VF BAR 0 [mem size 0x00100000 64bit]: can't assign; no space [ 0.703068] pci 0000:04:00.0: VF BAR 0 [mem size 0x00100000 64bit]: failed to assign [ 0.703214] pci 0000:04:00.0: VF BAR 3 [mem size 0x00100000 64bit]: can't assign; no space [ 0.703361] pci 0000:04:00.0: VF BAR 3 [mem size 0x00100000 64bit]: failed to assign [ 0.703524] pci 0000:04:00.1: VF BAR 0 [mem size 0x00100000 64bit]: can't assign; no space [ 0.703671] pci 0000:04:00.1: VF BAR 0 [mem size 0x00100000 64bit]: failed to assign [ 0.703817] pci 0000:04:00.1: VF BAR 3 [mem size 0x00100000 64bit]: can't assign; no space [ 0.703963] pci 0000:04:00.1: VF BAR 3 [mem size 0x00100000 64bit]: failed to assign [ 0.704109] pci 0000:00:02.2: PCI bridge to [bus 04] [ 0.704244] pci 0000:00:02.2: bridge window [mem 0xfb400000-0xfb4fffff] [ 0.704405] pci 0000:00:02.2: bridge window [mem 0xfba00000-0xfbefffff 64bit pref] [ 0.704578] pci 0000:00:03.0: PCI bridge to [bus 05] [ 0.704752] pci 0000:00:03.2: PCI bridge to [bus 06] [ 0.704926] pci 0000:00:1c.0: PCI bridge to [bus 07] [ 0.705047] pci 0000:00:1c.0: bridge window [io 0xe000-0xefff] [ 0.705187] pci 0000:00:1c.0: bridge window [mem 0xfb300000-0xfb3fffff] [ 0.705349] pci 0000:00:1c.1: PCI bridge to [bus 08] [ 0.705488] pci 0000:00:1c.1: bridge window [io 0xd000-0xdfff] [ 0.705629] pci 0000:00:1c.1: bridge window [mem 0xfb200000-0xfb2fffff] [ 0.705799] pci 0000:09:00.0: PCI bridge to [bus 0a] [ 0.705920] pci 0000:09:00.0: bridge window [io 0xc000-0xcfff] [ 0.706062] pci 0000:09:00.0: bridge window [mem 0xfa000000-0xfb0fffff] [ 0.706229] pci 0000:00:1c.3: PCI bridge to [bus 09-0a] [ 0.706350] pci 0000:00:1c.3: bridge window [io 0xc000-0xcfff] [ 0.706506] pci 0000:00:1c.3: bridge window [mem 0xfa000000-0xfb0fffff] [ 0.706684] pci 0000:0b:00.0: VF BAR 0 [mem 0x90000000-0x9001ffff 64bit pref]: assigned [ 0.706842] pci 0000:0b:00.0: VF BAR 3 [mem 0x90020000-0x9003ffff 64bit pref]: assigned [ 0.707002] pci 0000:0b:00.1: VF BAR 0 [mem 0x90040000-0x9005ffff 64bit pref]: assigned [ 0.707164] pci 0000:0b:00.1: VF BAR 3 [mem 0x90060000-0x9007ffff 64bit pref]: assigned [ 0.707318] pci 0000:0b:00.2: VF BAR 0 [mem 0x90080000-0x9009ffff 64bit pref]: assigned [ 0.707485] pci 0000:0b:00.2: VF BAR 3 [mem 0x900a0000-0x900bffff 64bit pref]: assigned [ 0.707640] pci 0000:0b:00.3: VF BAR 0 [mem 0x900c0000-0x900dffff 64bit pref]: assigned [ 0.707794] pci 0000:0b:00.3: VF BAR 3 [mem 0x900e0000-0x900fffff 64bit pref]: assigned [ 0.707955] pci 0000:00:1c.4: PCI bridge to [bus 0b] [ 0.708075] pci 0000:00:1c.4: bridge window [io 0xb000-0xbfff] [ 0.708215] pci 0000:00:1c.4: bridge window [mem 0xfb100000-0xfb1fffff] [ 0.708350] pci 0000:00:1c.4: bridge window [mem 0x90000000-0x900fffff 64bit pref] [ 0.708549] pci_bus 0000:00: Some PCI device resources are unassigned, try booting with pci=realloc [ 0.708701] pci_bus 0000:00: resource 4 [io 0x0000-0x0cf7 window] [ 0.708821] pci_bus 0000:00: resource 5 [io 0x1000-0xffff window] [ 0.708941] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff window] [ 0.709062] pci_bus 0000:00: resource 7 [mem 0x90000000-0xfbffbfff window] [ 0.709184] pci_bus 0000:03: resource 1 [mem 0xfb500000-0xfb5fffff] [ 0.709303] pci_bus 0000:04: resource 1 [mem 0xfb400000-0xfb4fffff] [ 0.709437] pci_bus 0000:04: resource 2 [mem 0xfba00000-0xfbefffff 64bit pref] [ 0.709583] pci_bus 0000:07: resource 0 [io 0xe000-0xefff] [ 0.709700] pci_bus 0000:07: resource 1 [mem 0xfb300000-0xfb3fffff] [ 0.709819] pci_bus 0000:08: resource 0 [io 0xd000-0xdfff] [ 0.709942] pci_bus 0000:08: resource 1 [mem 0xfb200000-0xfb2fffff] [ 0.710062] pci_bus 0000:09: resource 0 [io 0xc000-0xcfff] [ 0.710179] pci_bus 0000:09: resource 1 [mem 0xfa000000-0xfb0fffff] [ 0.710298] pci_bus 0000:0a: resource 0 [io 0xc000-0xcfff] [ 0.710431] pci_bus 0000:0a: resource 1 [mem 0xfa000000-0xfb0fffff] [ 0.710551] pci_bus 0000:0b: resource 0 [io 0xb000-0xbfff] [ 0.710668] pci_bus 0000:0b: resource 1 [mem 0xfb100000-0xfb1fffff] [ 0.710787] pci_bus 0000:0b: resource 2 [mem 0x90000000-0x900fffff 64bit pref] [ 0.711324] pci 0000:00:05.0: disabled boot interrupts on device [8086:6f28] [ 0.711556] xen: registering gsi 19 triggering 0 polarity 1 [ 0.711589] xen: --> pirq=19 -> irq=19 (gsi=19) [ 0.720421] xen: registering gsi 18 triggering 0 polarity 1 [ 0.720446] xen: --> pirq=18 -> irq=18 (gsi=18) [ 0.736566] pci 0000:00:1a.0: quirk_usb_early_handoff+0x0/0x7c0 took 15843 usecs [ 0.736812] xen: registering gsi 18 triggering 0 polarity 1 [ 0.736818] Already setup the GSI :18 [ 0.751813] pci 0000:00:1d.0: quirk_usb_early_handoff+0x0/0x7c0 took 14701 usecs [ 0.752031] pci 0000:04:00.0: CLS mismatch (64 != 32), using 64 bytes [ 0.752206] PCI-DMA: Using software bounce buffering for IO (SWIOTLB) [ 0.752297] Unpacking initramfs... [ 0.752334] software IO TLB: mapped [mem 0x000000001b180000-0x000000001f180000] (64MB) [ 0.752697] kvm_intel: VMX not supported by CPU 1 [ 0.752814] kvm_amd: CPU 1 isn't AMD or Hygon [ 0.752930] clocksource: tsc: mask: 0xffffffffffffffff max_cycles: 0x1fb63109b96, max_idle_ns: 440795265316 ns [ 0.753194] clocksource: Switched to clocksource tsc [ 0.763907] Initialise system trusted keyrings [ 0.764215] workingset: timestamp_bits=62 max_order=17 bucket_order=0 [ 0.764559] NFS: Registering the id_resolver key type [ 0.764704] Key type id_resolver registered [ 0.764825] Key type id_legacy registered [ 0.765018] 9p: Installing v9fs 9p2000 file system support [ 0.782830] Key type asymmetric registered [ 0.782959] Asymmetric key parser 'x509' registered [ 0.783102] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 251) [ 0.783257] io scheduler mq-deadline registered [ 0.783372] io scheduler kyber registered [ 0.784029] xen: registering gsi 16 triggering 0 polarity 1 [ 0.784063] xen: --> pirq=16 -> irq=16 (gsi=16) [ 0.784470] xen: registering gsi 16 triggering 0 polarity 1 [ 0.784476] Already setup the GSI :16 [ 0.784993] xen: registering gsi 16 triggering 0 polarity 1 [ 0.784999] Already setup the GSI :16 [ 0.785318] xen: registering gsi 16 triggering 0 polarity 1 [ 0.785322] Already setup the GSI :16 [ 0.785639] xen: registering gsi 16 triggering 0 polarity 1 [ 0.785643] Already setup the GSI :16 [ 0.786137] xen: registering gsi 16 triggering 0 polarity 1 [ 0.786143] Already setup the GSI :16 [ 0.786612] xen: registering gsi 16 triggering 0 polarity 1 [ 0.786617] Already setup the GSI :16 [ 0.787102] xen: registering gsi 17 triggering 0 polarity 1 [ 0.787123] xen: --> pirq=17 -> irq=17 (gsi=17) [ 0.787461] xen: registering gsi 19 triggering 0 polarity 1 [ 0.787466] Already setup the GSI :19 [ 0.787936] xen: registering gsi 16 triggering 0 polarity 1 [ 0.787942] Already setup the GSI :16 [ 0.788590] input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input0 [ 0.788799] ACPI: button: Power Button [PWRB] [ 0.788948] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input1 [ 0.789209] ACPI: button: Power Button [PWRF] [ 0.789479] Monitor-Mwait will be used to enter C-1 state [ 0.789528] Monitor-Mwait will be used to enter C-2 state [ 0.789549] ACPI: \_SB_.SCK0.CP00: Found 2 idle states [ 0.789925] ACPI: \_SB_.SCK0.CP01: Found 2 idle states [ 0.790380] ACPI: \_SB_.SCK0.CP02: Found 2 idle states [ 0.790906] ACPI: \_SB_.SCK0.CP03: Found 2 idle states [ 0.791409] ACPI: \_SB_.SCK0.CP04: Found 2 idle states [ 0.791937] ACPI: \_SB_.SCK0.CP05: Found 2 idle states [ 0.792338] ACPI: \_SB_.SCK0.CP06: Found 2 idle states [ 0.792809] ACPI: \_SB_.SCK0.CP07: Found 2 idle states [ 0.793629] xen:xen_evtchn: Event-channel device installed [ 0.793891] xen_pciback: backend is vpci [ 0.794814] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled [ 0.795204] 00:04: ttyS1 at I/O 0x2f8 (irq = 3, base_baud = 115200) is a 16550A [ 0.796042] hpet_acpi_add: no address or irqs in _CRS [ 0.796248] Non-volatile memory driver v1.3 [ 0.798920] loop: module loaded [ 0.805818] mei_me 0000:00:16.0: Device doesn't have valid ME Interface [ 0.805870] ahci 0000:00:1f.2: version 3.0 [ 0.806046] xen: registering gsi 16 triggering 0 polarity 1 [ 0.806055] Already setup the GSI :16 [ 0.806425] ahci 0000:00:1f.2: AHCI vers 0001.0300, 32 command slots, 6 Gbps, SATA mode [ 0.806576] ahci 0000:00:1f.2: 6/6 ports implemented (port mask 0x3f) [ 0.806721] ahci 0000:00:1f.2: flags: 64bit ncq led clo pio ems apst [ 0.822350] scsi host0: ahci [ 0.822728] scsi host1: ahci [ 0.823119] scsi host2: ahci [ 0.823504] scsi host3: ahci [ 0.823869] scsi host4: ahci [ 0.824208] scsi host5: ahci [ 0.824358] ata1: SATA max UDMA/133 abar m2048@0xfb612000 port 0xfb612100 irq 83 lpm-pol 0 [ 0.824514] ata2: SATA max UDMA/133 abar m2048@0xfb612000 port 0xfb612180 irq 83 lpm-pol 0 [ 0.824679] ata3: SATA max UDMA/133 abar m2048@0xfb612000 port 0xfb612200 irq 83 lpm-pol 0 [ 0.824842] ata4: SATA max UDMA/133 abar m2048@0xfb612000 port 0xfb612280 irq 83 lpm-pol 0 [ 0.824989] ata5: SATA max UDMA/133 abar m2048@0xfb612000 port 0xfb612300 irq 83 lpm-pol 0 [ 0.825136] ata6: SATA max UDMA/133 abar m2048@0xfb612000 port 0xfb612380 irq 83 lpm-pol 0 [ 0.825686] tun: Universal TUN/TAP device driver, 1.6 [ 0.825954] e100: Intel(R) PRO/100 Network Driver [ 0.826071] e100: Copyright(c) 1999-2006 Intel Corporation [ 0.826209] sky2: driver version 1.30 [ 0.827512] xen_netfront: Initialising Xen virtual ethernet driver [ 0.827968] xen: registering gsi 19 triggering 0 polarity 1 [ 0.827978] Already setup the GSI :19 [ 0.828067] xen: registering gsi 18 triggering 0 polarity 1 [ 0.828119] Already setup the GSI :18 [ 0.828223] xhci_hcd 0000:00:14.0: xHCI Host Controller [ 0.828238] xen: registering gsi 18 triggering 0 polarity 1 [ 0.828328] xhci_hcd 0000:00:14.0: new USB bus registered, assigned bus number 1 [ 0.828362] Already setup the GSI :18 [ 0.829445] xhci_hcd 0000:00:14.0: hcc params 0x200077c1 hci version 0x100 quirks 0x0000000000009810 [ 0.829995] xhci_hcd 0000:00:14.0: xHCI Host Controller [ 0.830043] ehci-pci 0000:00:1a.0: EHCI Host Controller [ 0.830193] xhci_hcd 0000:00:14.0: new USB bus registered, assigned bus number 2 [ 0.830325] ehci-pci 0000:00:1a.0: new USB bus registered, assigned bus number 3 [ 0.830384] xhci_hcd 0000:00:14.0: Host supports USB 3.0 SuperSpeed [ 0.830427] ehci-pci 0000:00:1a.0: debug port 2 [ 0.830830] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 6.10 [ 0.830988] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 0.831135] usb usb1: Product: xHCI Host Controller [ 0.831252] usb usb1: Manufacturer: Linux 6.10.0-rc2+ xhci-hcd [ 0.831389] usb usb1: SerialNumber: 0000:00:14.0 [ 0.831761] hub 1-0:1.0: USB hub found [ 0.831928] hub 1-0:1.0: 8 ports detected [ 0.833377] usb usb2: New USB device found, idVendor=1d6b, idProduct=0003, bcdDevice= 6.10 [ 0.833535] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 0.833708] usb usb2: Product: xHCI Host Controller [ 0.833834] usb usb2: Manufacturer: Linux 6.10.0-rc2+ xhci-hcd [ 0.833955] usb usb2: SerialNumber: 0000:00:14.0 [ 0.834311] hub 2-0:1.0: USB hub found [ 0.834465] hub 2-0:1.0: 6 ports detected [ 0.834775] ehci-pci 0000:00:1a.0: irq 18, io mem 0xfb614000 [ 0.835729] usbcore: registered new interface driver usblp [ 0.835861] usbcore: registered new interface driver usb-storage [ 0.836008] i8042: PNP: No PS/2 controller found. [ 0.836319] rtc_cmos 00:00: RTC can wake from S4 [ 0.836973] rtc_cmos 00:00: registered as rtc0 [ 0.837136] rtc_cmos 00:00: alarms up to one month, y3k, 114 bytes nvram [ 0.837323] device-mapper: uevent: version 1.0.3 [ 0.837542] device-mapper: ioctl: 4.48.0-ioctl (2023-03-01) initialised: dm-devel@lists.linux.dev [ 0.837596] xen: registering gsi 18 triggering 0 polarity 1 [ 0.837736] intel_pstate: CPU model not supported [ 0.837737] Already setup the GSI :18 [ 0.837772] i801_smbus 0000:00:1f.3: SPD Write Disable is set [ 0.837872] hid: raw HID events driver (C) Jiri Kosina [ 0.837982] i801_smbus 0000:00:1f.3: SMBus using PCI interrupt [ 0.838218] usbcore: registered new interface driver usbhid [ 0.838442] usbhid: USB HID core driver [ 0.839013] Initializing XFRM netlink socket [ 0.839144] NET: Registered PF_INET6 protocol family [ 0.839702] Segment Routing with IPv6 [ 0.839840] In-situ OAM (IOAM) with IPv6 [ 0.839987] sit: IPv6, IPv4 and MPLS over IPv4 tunneling driver [ 0.840272] NET: Registered PF_PACKET protocol family [ 0.840444] 9pnet: Installing 9P2000 support [ 0.840574] Key type dns_resolver registered [ 0.841619] IPI shorthand broadcast: enabled [ 0.841770] ehci-pci 0000:00:1a.0: USB 2.0 started, EHCI 1.00 [ 0.842113] usb usb3: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 6.10 [ 0.842269] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 0.842416] usb usb3: Product: EHCI Host Controller [ 0.842556] usb usb3: Manufacturer: Linux 6.10.0-rc2+ ehci_hcd [ 0.842701] usb usb3: SerialNumber: 0000:00:1a.0 [ 0.843247] hub 3-0:1.0: USB hub found [ 0.843440] hub 3-0:1.0: 2 ports detected [ 0.843902] ehci-pci 0000:00:1d.0: EHCI Host Controller [ 0.844127] ehci-pci 0000:00:1d.0: new USB bus registered, assigned bus number 4 [ 0.844308] ehci-pci 0000:00:1d.0: debug port 2 [ 0.844928] sched_clock: Marking stable (807004935, 37652571)->(1731263445, -886605939) [ 0.845516] Timer migration: 1 hierarchy levels; 8 children per group; 1 crossnode level [ 0.848425] ehci-pci 0000:00:1d.0: irq 18, io mem 0xfb613000 [ 0.848573] registered taskstats version 1 [ 0.848707] Loading compiled-in X.509 certificates [ 0.850374] PM: Magic number: 12:989:444 [ 0.850617] printk: legacy console [netcon0] enabled [ 0.850778] netconsole: network logging started [ 0.851157] cfg80211: Loading compiled-in X.509 certificates for regulatory database [ 0.854736] ehci-pci 0000:00:1d.0: USB 2.0 started, EHCI 1.00 [ 0.855116] usb usb4: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 6.10 [ 0.855270] usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 0.855416] usb usb4: Product: EHCI Host Controller [ 0.855532] usb usb4: Manufacturer: Linux 6.10.0-rc2+ ehci_hcd [ 0.855651] usb usb4: SerialNumber: 0000:00:1d.0 [ 0.856001] hub 4-0:1.0: USB hub found [ 0.856153] hub 4-0:1.0: 2 ports detected [ 0.869375] Freeing initrd memory: 20120K [ 0.881504] Loaded X.509 cert 'sforshee: 00b28ddf47aef9cea7' [ 0.881867] Loaded X.509 cert 'wens: 61c038651aabdcf94bd0ac7ff06c7248db18c600' [ 0.882030] ALSA device list: [ 0.882140] No soundcards found. [ 0.882846] cfg80211: loaded regulatory.db is malformed or signature is missing/invalid [ 1.068752] usb 1-3: new high-speed USB device number 2 using xhci_hcd [ 1.084834] usb 3-1: new high-speed USB device number 2 using ehci-pci [ 1.100799] usb 4-1: new high-speed USB device number 2 using ehci-pci [ 1.138166] ata6: SATA link down (SStatus 0 SControl 300) [ 1.138361] ata5: SATA link down (SStatus 0 SControl 300) [ 1.138501] ata1: SATA link down (SStatus 0 SControl 300) [ 1.138675] ata3: SATA link up 6.0 Gbps (SStatus 133 SControl 300) [ 1.138823] ata2: SATA link down (SStatus 0 SControl 300) [ 1.138980] ata4: SATA link down (SStatus 0 SControl 300) [ 1.139921] ata3.00: ATA-10: HGST HUS722T1TALA604, RAGNWA05, max UDMA/133 [ 1.196455] usb 1-3: New USB device found, idVendor=05e3, idProduct=0610, bcdDevice=32.98 [ 1.196613] usb 1-3: New USB device strings: Mfr=0, Product=1, SerialNumber=0 [ 1.196753] usb 1-3: Product: USB2.0 Hub [ 1.197842] hub 1-3:1.0: USB hub found [ 1.198515] hub 1-3:1.0: 4 ports detected [ 1.213091] usb 3-1: New USB device found, idVendor=8087, idProduct=8008, bcdDevice= 0.05 [ 1.213248] usb 3-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0 [ 1.213674] hub 3-1:1.0: USB hub found [ 1.214011] hub 3-1:1.0: 4 ports detected [ 1.224609] ata3.00: 1953525168 sectors, multi 16: LBA48 NCQ (depth 32), AA [ 1.224898] ata3.00: Features: NCQ-sndrcv NCQ-prio [ 1.229095] usb 4-1: New USB device found, idVendor=8087, idProduct=8000, bcdDevice= 0.05 [ 1.229252] usb 4-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0 [ 1.229620] hub 4-1:1.0: USB hub found [ 1.229844] hub 4-1:1.0: 4 ports detected [ 1.252609] ata3.00: configured for UDMA/133 [ 1.253098] scsi 2:0:0:0: Direct-Access ATA HGST HUS722T1TAL WA05 PQ: 0 ANSI: 5 [ 1.254092] sd 2:0:0:0: [sda] 1953525168 512-byte logical blocks: (1.00 TB/932 GiB) [ 1.254110] sd 2:0:0:0: Attached scsi generic sg0 type 0 [ 1.254328] sd 2:0:0:0: [sda] Write Protect is off [ 1.254573] sd 2:0:0:0: [sda] Mode Sense: 00 3a 00 00 [ 1.254696] sd 2:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 1.254973] sd 2:0:0:0: [sda] Preferred minimum I/O size 512 bytes [ 1.271186] sda: sda1 sda2 < sda5 > [ 1.271601] sd 2:0:0:0: [sda] Attached SCSI removable disk [ 1.273482] Freeing unused kernel image (initmem) memory: 2680K [ 1.273624] Write protecting the kernel read-only data: 24576k [ 1.293476] Freeing unused kernel image (rodata/data gap) memory: 2028K [ 1.315728] usb 1-4: new high-speed USB device number 3 using xhci_hcd [ 1.442058] usb 1-4: New USB device found, idVendor=0557, idProduct=7000, bcdDevice= 0.00 [ 1.442214] usb 1-4: New USB device strings: Mfr=0, Product=0, SerialNumber=0 [ 1.442951] hub 1-4:1.0: USB hub found [ 1.443175] hub 1-4:1.0: 4 ports detected [ 1.505738] usb 1-3.2: new high-speed USB device number 4 using xhci_hcd [ 1.583218] usb 1-3.2: New USB device found, idVendor=05e3, idProduct=0610, bcdDevice=32.98 [ 1.583375] usb 1-3.2: New USB device strings: Mfr=0, Product=1, SerialNumber=0 [ 1.583521] usb 1-3.2: Product: USB2.0 Hub [ 1.584218] hub 1-3.2:1.0: USB hub found [ 1.584704] hub 1-3.2:1.0: 4 ports detected [ 1.734727] usb 1-4.1: new low-speed USB device number 5 using xhci_hcd [ 1.768639] x86/mm: Checked W+X mappings: passed, no W+X pages found. [ 1.768795] Run /init as init process [ 1.768907] with arguments: [ 1.768908] /init [ 1.768910] placeholder [ 1.768911] with environment: [ 1.768912] HOME=/ [ 1.768913] TERM=linux [ 1.840140] usb 1-4.1: New USB device found, idVendor=0557, idProduct=2419, bcdDevice= 1.00 [ 1.840325] usb 1-4.1: New USB device strings: Mfr=0, Product=0, SerialNumber=0 [ 1.846271] input: HID 0557:2419 as /devices/pci0000:00/0000:00:14.0/usb1/1-4/1-4.1/1-4.1:1.0/0003:0557:2419.0001/input/input2 [ 1.898155] hid-generic 0003:0557:2419.0001: input,hidraw0: USB HID v1.00 Keyboard [HID 0557:2419] on usb-0000:00:14.0-4.1/input0 [ 1.901334] input: HID 0557:2419 as /devices/pci0000:00/0000:00:14.0/usb1/1-4/1-4.1/1-4.1:1.1/0003:0557:2419.0002/input/input3 [ 1.901728] hid-generic 0003:0557:2419.0002: input,hidraw1: USB HID v1.00 Mouse [HID 0557:2419] on usb-0000:00:14.0-4.1/input1 [ 2.215415] ixgbe: Intel(R) 10 Gigabit PCI Express Network Driver [ 2.215570] ixgbe: Copyright (c) 1999-2016 Intel Corporation. [ 2.215991] ACPI Warning: \_SB.PCI0.BR2C._PRT: Return Package has no elements (empty) (20240322/nsprepkg-94) [ 2.217432] xen: registering gsi 16 triggering 0 polarity 1 [ 2.217443] Already setup the GSI :16 [ 2.221080] igb: Intel(R) Gigabit Ethernet Network Driver [ 2.221233] igb: Copyright (c) 2007-2014 Intel Corporation. [ 2.221503] xen: registering gsi 16 triggering 0 polarity 1 [ 2.221514] Already setup the GSI :16 [ 2.251879] pps pps0: new PPS source ptp0 [ 2.252155] igb 0000:07:00.0: added PHC on eth0 [ 2.252319] igb 0000:07:00.0: Intel(R) Gigabit Ethernet Network Connection [ 2.252471] igb 0000:07:00.0: eth0: (PCIe:2.5Gb/s:Width x1) 0c:c4:7a:93:a4:c8 [ 2.252695] igb 0000:07:00.0: eth0: PBA No: 010C00-000 [ 2.252815] igb 0000:07:00.0: Using MSI-X interrupts. 4 rx queue(s), 4 tx queue(s) [ 2.253053] xen: registering gsi 17 triggering 0 polarity 1 [ 2.253061] Already setup the GSI :17 [ 2.282362] pps pps1: new PPS source ptp1 [ 2.282637] igb 0000:08:00.0: added PHC on eth1 [ 2.282826] igb 0000:08:00.0: Intel(R) Gigabit Ethernet Network Connection [ 2.282980] igb 0000:08:00.0: eth1: (PCIe:2.5Gb/s:Width x1) 0c:c4:7a:93:a4:c9 [ 2.283195] igb 0000:08:00.0: eth1: PBA No: 010000-000 [ 2.283361] igb 0000:08:00.0: Using MSI-X interrupts. 4 rx queue(s), 4 tx queue(s) [ 2.283688] xen: registering gsi 16 triggering 0 polarity 1 [ 2.283698] Already setup the GSI :16 [ 2.341705] igb 0000:0b:00.0: added PHC on eth2 [ 2.341849] igb 0000:0b:00.0: Intel(R) Gigabit Ethernet Network Connection [ 2.341970] igb 0000:0b:00.0: eth2: (PCIe:5.0Gb/s:Width x4) 0c:c4:7a:93:a4:ca [ 2.342175] igb 0000:0b:00.0: eth2: PBA No: 010000-000 [ 2.342291] igb 0000:0b:00.0: Using MSI-X interrupts. 8 rx queue(s), 8 tx queue(s) [ 2.342528] xen: registering gsi 17 triggering 0 polarity 1 [ 2.342537] Already setup the GSI :17 [ 2.400722] igb 0000:0b:00.1: added PHC on eth3 [ 2.400863] igb 0000:0b:00.1: Intel(R) Gigabit Ethernet Network Connection [ 2.400984] igb 0000:0b:00.1: eth3: (PCIe:5.0Gb/s:Width x4) 0c:c4:7a:93:a4:cb [ 2.401226] igb 0000:0b:00.1: eth3: PBA No: 010000-000 [ 2.401341] igb 0000:0b:00.1: Using MSI-X interrupts. 8 rx queue(s), 8 tx queue(s) [ 2.401568] xen: registering gsi 18 triggering 0 polarity 1 [ 2.401576] Already setup the GSI :18 [ 2.457925] igb 0000:0b:00.2: added PHC on eth4 [ 2.458069] igb 0000:0b:00.2: Intel(R) Gigabit Ethernet Network Connection [ 2.458194] igb 0000:0b:00.2: eth4: (PCIe:5.0Gb/s:Width x4) 0c:c4:7a:93:a4:cc [ 2.458397] igb 0000:0b:00.2: eth4: PBA No: 010000-000 [ 2.458512] igb 0000:0b:00.2: Using MSI-X interrupts. 8 rx queue(s), 8 tx queue(s) [ 2.458771] xen: registering gsi 19 triggering 0 polarity 1 [ 2.458781] Already setup the GSI :19 [ 2.516088] igb 0000:0b:00.3: added PHC on eth5 [ 2.516272] igb 0000:0b:00.3: Intel(R) Gigabit Ethernet Network Connection [ 2.516393] igb 0000:0b:00.3: eth5: (PCIe:5.0Gb/s:Width x4) 0c:c4:7a:93:a4:cd [ 2.516596] igb 0000:0b:00.3: eth5: PBA No: 010000-000 [ 2.516724] igb 0000:0b:00.3: Using MSI-X interrupts. 8 rx queue(s), 8 tx queue(s) [ 2.519387] igb 0000:0b:00.0 enx0cc47a93a4ca: renamed from eth2 [ 2.519846] igb 0000:07:00.0 enx0cc47a93a4c8: renamed from eth0 [ 2.520318] igb 0000:08:00.0 enx0cc47a93a4c9: renamed from eth1 [ 2.520943] igb 0000:0b:00.2 enx0cc47a93a4cc: renamed from eth4 [ 2.521445] igb 0000:0b:00.1 enx0cc47a93a4cb: renamed from eth3 [ 2.522469] igb 0000:0b:00.3 enx0cc47a93a4cd: renamed from eth5 [ 2.955534] ixgbe 0000:04:00.0: Multiqueue Enabled: Rx Queue count = 8, Tx Queue count = 8 XDP Queue count = 0 [ 3.084370] ixgbe 0000:04:00.0: MAC: 5, PHY: 0, PBA No: 020B00-000 [ 3.084603] ixgbe 0000:04:00.0: 0c:c4:7a:93:a8:9e [ 3.376628] ixgbe 0000:04:00.0: Intel(R) 10 Gigabit Network Connection [ 3.377048] ACPI Warning: \_SB.PCI0.BR2C._PRT: Return Package has no elements (empty) (20240322/nsprepkg-94) [ 3.377271] xen: registering gsi 17 triggering 0 polarity 1 [ 3.377282] Already setup the GSI :17 [ 4.109293] ixgbe 0000:04:00.1: Multiqueue Enabled: Rx Queue count = 8, Tx Queue count = 8 XDP Queue count = 0 [ 4.238425] ixgbe 0000:04:00.1: MAC: 5, PHY: 0, PBA No: 020B00-000 [ 4.238646] ixgbe 0000:04:00.1: 0c:c4:7a:93:a8:9f [ 4.528927] ixgbe 0000:04:00.1: Intel(R) 10 Gigabit Network Connection [ 4.531421] ixgbe 0000:04:00.0 enx0cc47a93a89e: renamed from eth0 [ 4.531824] ixgbe 0000:04:00.1 enx0cc47a93a89f: renamed from eth1 [ 4.939309] EXT4-fs (dm-0): mounting ext3 file system using the ext4 subsystem [ 4.946734] EXT4-fs (dm-0): mounted filesystem df5a1aa3-6eb9-45ad-b191-f652b8630841 ro with ordered data mode. Quota mode: none. [ 8.607838] EXT4-fs (dm-0): re-mounted df5a1aa3-6eb9-45ad-b191-f652b8630841 r/w. Quota mode: none. [ 9.524921] EXT4-fs (sda1): mounting ext3 file system using the ext4 subsystem [ 9.543719] EXT4-fs (sda1): mounted filesystem ea155264-4879-4bb6-800b-2ebd2831608f r/w with ordered data mode. Quota mode: none. [ 9.627743] Adding 1949692k swap on /dev/mapper/debina1--vg-swap_1. Priority:-2 extents:1 across:1949692k [ 11.200798] xenbr0: port 1(enx0cc47a93a4c8) entered blocking state [ 11.201003] xenbr0: port 1(enx0cc47a93a4c8) entered disabled state [ 11.201135] igb 0000:07:00.0 enx0cc47a93a4c8: entered allmulticast mode [ 11.201304] igb 0000:07:00.0 enx0cc47a93a4c8: entered promiscuous mode [ 14.325260] igb 0000:07:00.0 enx0cc47a93a4c8: igb: enx0cc47a93a4c8 NIC Link is Up 1000 Mbps Full Duplex, Flow Control: RX [ 14.530999] xenbr0: port 1(enx0cc47a93a4c8) entered blocking state [ 14.531153] xenbr0: port 1(enx0cc47a93a4c8) entered forwarding state