[ 0.000000] Linux version 6.1.92+ (osstest@himrod2) (gcc (Debian 12.2.0-14) 12.2.0, GNU ld (GNU Binutils for Debian) 2.40) #1 SMP PREEMPT_DYNAMIC Tue Jun 11 17:24:42 UTC 2024 [ 0.000000] Command line: placeholder root=/dev/mapper/debina0--vg-root ro console=hvc0 [ 0.000000] Released 0 page(s) [ 0.000000] BIOS-provided physical RAM map: [ 0.000000] Xen: [mem 0x0000000000000000-0x0000000000099fff] usable [ 0.000000] Xen: [mem 0x000000000009ac00-0x00000000000fffff] reserved [ 0.000000] Xen: [mem 0x0000000000100000-0x0000000020065fff] usable [ 0.000000] Xen: [mem 0x00000000796ef000-0x00000000798bdfff] reserved [ 0.000000] Xen: [mem 0x00000000799b7000-0x0000000079e5afff] ACPI NVS [ 0.000000] Xen: [mem 0x0000000079e5b000-0x000000007bdb0fff] reserved [ 0.000000] Xen: [mem 0x000000007bdb2000-0x000000007be37fff] reserved [ 0.000000] Xen: [mem 0x0000000080000000-0x000000008fffffff] reserved [ 0.000000] Xen: [mem 0x00000000fbffc000-0x00000000fbffcfff] reserved [ 0.000000] Xen: [mem 0x00000000fec00000-0x00000000fec00fff] reserved [ 0.000000] Xen: [mem 0x00000000fed1c000-0x00000000fed1ffff] reserved [ 0.000000] Xen: [mem 0x00000000fee00000-0x00000000feefffff] reserved [ 0.000000] Xen: [mem 0x00000000ff000000-0x00000000ffffffff] reserved [ 0.000000] NX (Execute Disable) protection: active [ 0.000000] SMBIOS 2.8 present. [ 0.000000] DMI: Supermicro SYS-5018D-FN8T/X10SDV-TP8F, BIOS 1.0b 11/21/2016 [ 0.000000] Hypervisor detected: Xen PV [ 0.000460] tsc: Detected 2199.996 MHz processor [ 0.000897] e820: update [mem 0x00000000-0x00000fff] usable ==> reserved [ 0.000901] e820: remove [mem 0x000a0000-0x000fffff] usable [ 0.000907] last_pfn = 0x20066 max_arch_pfn = 0x400000000 [ 0.000909] Disabled [ 0.000910] x86/PAT: MTRRs disabled, skipping PAT initialization too. [ 0.000914] x86/PAT: Configuration [0-7]: WB WT UC- UC WC WP UC UC [ 0.000953] Kernel/User page tables isolation: disabled on XEN PV. [ 0.027719] RAMDISK: [mem 0x04000000-0x0536afff] [ 0.027728] ACPI: Early table checksum verification disabled [ 0.028332] ACPI: RSDP 0x00000000000F0580 000024 (v02 SUPERM) [ 0.028344] ACPI: XSDT 0x00000000799FF098 0000B4 (v01 SUPERM SMCI--MB 01072009 AMI 00010013) [ 0.028381] ACPI: FACP 0x0000000079A17AC0 00010C (v05 SUPERM SMCI--MB 01072009 AMI 00010013) [ 0.028429] ACPI: DSDT 0x00000000799FF1E8 0188D5 (v02 SUPERM SMCI--MB 01072009 INTL 20091013) [ 0.028446] ACPI: FACS 0x0000000079E59F80 000040 [ 0.028462] ACPI: APIC 0x0000000079A17BD0 0000BC (v03 SUPERM SMCI--MB 01072009 AMI 00010013) [ 0.028478] ACPI: FPDT 0x0000000079A17C90 000044 (v01 SUPERM SMCI--MB 01072009 AMI 00010013) [ 0.028494] ACPI: FIDT 0x0000000079A17CD8 00009C (v01 SUPERM SMCI--MB 01072009 AMI 00010013) [ 0.028511] ACPI: MCFG 0x0000000079A17D78 00003C (v01 SUPERM SMCI--MB 01072009 MSFT 00000097) [ 0.028527] ACPI: UEFI 0x0000000079A17DB8 000042 (v01 00000000 00000000) [ 0.028544] ACPI: DBG2 0x0000000079A17E00 000072 (v00 SUPERM SMCI--MB 00000000 INTL 20091013) [ 0.028560] ACPI: HPET 0x0000000079A17E78 000038 (v01 SUPERM SMCI--MB 00000001 INTL 20091013) [ 0.028577] ACPI: WDDT 0x0000000079A17EB0 000040 (v01 SUPERM SMCI--MB 00000000 INTL 20091013) [ 0.028593] ACPI: SSDT 0x0000000079A17EF0 00ED8B (v01 AMI PmMgt 00000001 INTL 20120913) [ 0.028610] ACPI: SSDT 0x0000000079A26C80 002285 (v02 SUPERM SpsNm 00000002 INTL 20120913) [ 0.028626] ACPI: SSDT 0x0000000079A28F08 000064 (v02 SUPERM SpsNvs 00000002 INTL 20120913) [ 0.028642] ACPI: PRAD 0x0000000079A28F70 000102 (v02 SUPERM SMCI--MB 00000002 INTL 20120913) [ 0.028658] ACPI: RMAD 0x0000000079A29078 0000CC (v01 SUPERM SMCI--MB 00000001 INTL 20091013) [ 0.028675] ACPI: HEST 0x0000000079A29148 0000A8 (v01 SUPERM SMCI--MB 00000001 INTL 00000001) [ 0.028691] ACPI: BERT 0x0000000079A291F0 000030 (v01 SUPERM SMCI--MB 00000001 INTL 00000001) [ 0.028707] ACPI: ERST 0x0000000079A29220 000230 (v01 SUPERM SMCI--MB 00000001 INTL 00000001) [ 0.028727] ACPI: EINJ 0x0000000079A29450 000130 (v01 SUPERM SMCI--MB 00000001 INTL 00000001) [ 0.028736] ACPI: Reserving FACP table memory at [mem 0x79a17ac0-0x79a17bcb] [ 0.028738] ACPI: Reserving DSDT table memory at [mem 0x799ff1e8-0x79a17abc] [ 0.028739] ACPI: Reserving FACS table memory at [mem 0x79e59f80-0x79e59fbf] [ 0.028740] ACPI: Reserving APIC table memory at [mem 0x79a17bd0-0x79a17c8b] [ 0.028741] ACPI: Reserving FPDT table memory at [mem 0x79a17c90-0x79a17cd3] [ 0.028742] ACPI: Reserving FIDT table memory at [mem 0x79a17cd8-0x79a17d73] [ 0.028743] ACPI: Reserving MCFG table memory at [mem 0x79a17d78-0x79a17db3] [ 0.028743] ACPI: Reserving UEFI table memory at [mem 0x79a17db8-0x79a17df9] [ 0.028744] ACPI: Reserving DBG2 table memory at [mem 0x79a17e00-0x79a17e71] [ 0.028745] ACPI: Reserving HPET table memory at [mem 0x79a17e78-0x79a17eaf] [ 0.028746] ACPI: Reserving WDDT table memory at [mem 0x79a17eb0-0x79a17eef] [ 0.028747] ACPI: Reserving SSDT table memory at [mem 0x79a17ef0-0x79a26c7a] [ 0.028748] ACPI: Reserving SSDT table memory at [mem 0x79a26c80-0x79a28f04] [ 0.028749] ACPI: Reserving SSDT table memory at [mem 0x79a28f08-0x79a28f6b] [ 0.028750] ACPI: Reserving PRAD table memory at [mem 0x79a28f70-0x79a29071] [ 0.028751] ACPI: Reserving RMAD table memory at [mem 0x79a29078-0x79a29143] [ 0.028752] ACPI: Reserving HEST table memory at [mem 0x79a29148-0x79a291ef] [ 0.028753] ACPI: Reserving BERT table memory at [mem 0x79a291f0-0x79a2921f] [ 0.028754] ACPI: Reserving ERST table memory at [mem 0x79a29220-0x79a2944f] [ 0.028755] ACPI: Reserving EINJ table memory at [mem 0x79a29450-0x79a2957f] [ 0.028801] Setting APIC routing to Xen PV. [ 0.032852] Zone ranges: [ 0.032853] DMA [mem 0x0000000000001000-0x0000000000ffffff] [ 0.032856] DMA32 [mem 0x0000000001000000-0x0000000020065fff] [ 0.032858] Normal empty [ 0.032859] Movable zone start for each node [ 0.032859] Early memory node ranges [ 0.032860] node 0: [mem 0x0000000000001000-0x0000000000099fff] [ 0.032862] node 0: [mem 0x0000000000100000-0x0000000020065fff] [ 0.032863] Initmem setup node 0 [mem 0x0000000000001000-0x0000000020065fff] [ 0.032868] On node 0, zone DMA: 1 pages in unavailable ranges [ 0.032905] On node 0, zone DMA: 102 pages in unavailable ranges [ 0.034461] On node 0, zone DMA32: 32666 pages in unavailable ranges [ 0.034465] p2m virtual area at (____ptrval____), size is 40000000 [ 0.222097] Remapped 102 page(s) [ 0.223526] ACPI: PM-Timer IO Port: 0x408 [ 0.223580] ACPI: LAPIC_NMI (acpi_id[0x00] high level lint[0x1]) [ 0.223583] ACPI: LAPIC_NMI (acpi_id[0x02] high level lint[0x1]) [ 0.223584] ACPI: LAPIC_NMI (acpi_id[0x04] high level lint[0x1]) [ 0.223586] ACPI: LAPIC_NMI (acpi_id[0x06] high level lint[0x1]) [ 0.223587] ACPI: LAPIC_NMI (acpi_id[0x01] high level lint[0x1]) [ 0.223588] ACPI: LAPIC_NMI (acpi_id[0x03] high level lint[0x1]) [ 0.223590] ACPI: LAPIC_NMI (acpi_id[0x05] high level lint[0x1]) [ 0.223592] ACPI: LAPIC_NMI (acpi_id[0x07] high level lint[0x1]) [ 0.223620] IOAPIC[0]: apic_id 8, version 32, address 0xfec00000, GSI 0-23 [ 0.223634] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl) [ 0.223637] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level) [ 0.223663] ACPI: Using ACPI (MADT) for SMP configuration information [ 0.223668] ACPI: HPET id: 0x8086a701 base: 0xfed00000 [ 0.223737] smpboot: Allowing 8 CPUs, 0 hotplug CPUs [ 0.223752] PM: hibernation: Registered nosave memory: [mem 0x00000000-0x00000fff] [ 0.223755] PM: hibernation: Registered nosave memory: [mem 0x0009a000-0x0009afff] [ 0.223756] PM: hibernation: Registered nosave memory: [mem 0x0009b000-0x000fffff] [ 0.223758] [mem 0x90000000-0xfbffbfff] available for PCI devices [ 0.223767] Booting kernel on Xen [ 0.223768] Xen version: 4.19-unstable (preserve-AD) [ 0.223771] clocksource: refined-jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 1910969940391419 ns [ 0.230031] setup_percpu: NR_CPUS:64 nr_cpumask_bits:8 nr_cpu_ids:8 nr_node_ids:1 [ 0.230313] percpu: Embedded 54 pages/cpu s180520 r8192 d32472 u262144 [ 0.230320] pcpu-alloc: s180520 r8192 d32472 u262144 alloc=1*2097152 [ 0.230323] pcpu-alloc: [0] 0 1 2 3 4 5 6 7 [ 0.230402] xen: PV spinlocks enabled [ 0.230405] PV qspinlock hash table entries: 256 (order: 0, 4096 bytes, linear) [ 0.230410] Built 1 zonelists, mobility grouping on. Total pages: 129006 [ 0.230412] Kernel command line: placeholder root=/dev/mapper/debina0--vg-root ro console=hvc0 [ 0.230450] Unknown kernel command line parameters "placeholder", will be passed to user space. [ 0.230460] random: crng init done [ 0.230509] Dentry cache hash table entries: 65536 (order: 7, 524288 bytes, linear) [ 0.230535] Inode-cache hash table entries: 32768 (order: 6, 262144 bytes, linear) [ 0.231890] mem auto-init: stack:all(zero), heap alloc:off, heap free:off [ 0.231893] software IO TLB: area num 8. [ 0.291717] Memory: 390032K/524284K available (14349K kernel code, 2682K rwdata, 4576K rodata, 1580K init, 1296K bss, 134000K reserved, 0K cma-reserved) [ 0.291886] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=8, Nodes=1 [ 0.294427] Dynamic Preempt: voluntary [ 0.294526] rcu: Preemptible hierarchical RCU implementation. [ 0.294527] rcu: RCU event tracing is enabled. [ 0.294528] rcu: RCU restricting CPUs from NR_CPUS=64 to nr_cpu_ids=8. [ 0.294529] Trampoline variant of Tasks RCU enabled. [ 0.294530] rcu: RCU calculated value of scheduler-enlistment delay is 100 jiffies. [ 0.294531] rcu: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=8 [ 0.305040] NR_IRQS: 4352, nr_irqs: 488, preallocated irqs: 16 [ 0.305165] xen:events: Using FIFO-based ABI [ 0.305196] xen: --> pirq=1 -> irq=1 (gsi=1) [ 0.305205] xen: --> pirq=2 -> irq=2 (gsi=2) [ 0.305212] xen: --> pirq=3 -> irq=3 (gsi=3) [ 0.305220] xen: --> pirq=4 -> irq=4 (gsi=4) [ 0.305227] xen: --> pirq=5 -> irq=5 (gsi=5) [ 0.305235] xen: --> pirq=6 -> irq=6 (gsi=6) [ 0.305242] xen: --> pirq=7 -> irq=7 (gsi=7) [ 0.305249] xen: --> pirq=8 -> irq=8 (gsi=8) [ 0.305257] xen: --> pirq=9 -> irq=9 (gsi=9) [ 0.305264] xen: --> pirq=10 -> irq=10 (gsi=10) [ 0.305272] xen: --> pirq=11 -> irq=11 (gsi=11) [ 0.305279] xen: --> pirq=12 -> irq=12 (gsi=12) [ 0.305287] xen: --> pirq=13 -> irq=13 (gsi=13) [ 0.305294] xen: --> pirq=14 -> irq=14 (gsi=14) [ 0.305303] xen: --> pirq=15 -> irq=15 (gsi=15) [ 0.305313] rcu: srcu_init: Setting srcu_struct sizes based on contention. [ 0.310665] Console: colour VGA+ 80x25 [ 0.325387] printk: console [tty0] enabled [ 0.326743] printk: console [hvc0] enabled [ 0.326883] ACPI: Core revision 20220331 [ 0.342344] clocksource: xen: mask: 0xffffffffffffffff max_cycles: 0x1cd42e4dffb, max_idle_ns: 881590591483 ns [ 0.342508] Xen: using vcpuop timer interface [ 0.342516] installing Xen timer for CPU 0 [ 0.342666] clocksource: tsc-early: mask: 0xffffffffffffffff max_cycles: 0x1fb62f12e8c, max_idle_ns: 440795238402 ns [ 0.342824] Calibrating delay loop (skipped), value calculated using timer frequency.. 4399.99 BogoMIPS (lpj=2199996) [ 0.343152] Last level iTLB entries: 4KB 64, 2MB 8, 4MB 8 [ 0.343269] Last level dTLB entries: 4KB 64, 2MB 0, 4MB 0, 1GB 4 [ 0.343396] Spectre V1 : Mitigation: usercopy/swapgs barriers and __user pointer sanitization [ 0.343545] Spectre V2 : Mitigation: Retpolines [ 0.343831] Spectre V2 : Spectre v2 / SpectreRSB mitigation: Filling RSB on context switch [ 0.343990] Spectre V2 : Spectre v2 / SpectreRSB : Filling RSB on VMEXIT [ 0.344109] Spectre V2 : Enabling Restricted Speculation for firmware calls [ 0.344230] Spectre V2 : mitigation: Enabling conditional Indirect Branch Prediction Barrier [ 0.344377] Spectre V2 : User space: Mitigation: STIBP via prctl [ 0.344495] Speculative Store Bypass: Mitigation: Speculative Store Bypass disabled via prctl [ 0.344646] MDS: Mitigation: Clear CPU buffers [ 0.344759] TAA: Mitigation: Clear CPU buffers [ 0.344828] MMIO Stale Data: Vulnerable: Clear CPU buffers attempted, no microcode [ 0.344993] x86/fpu: Supporting XSAVE feature 0x001: 'x87 floating point registers' [ 0.345138] x86/fpu: Supporting XSAVE feature 0x002: 'SSE registers' [ 0.345289] x86/fpu: Supporting XSAVE feature 0x004: 'AVX registers' [ 0.345408] x86/fpu: xstate_offset[2]: 576, xstate_sizes[2]: 256 [ 0.345527] x86/fpu: Enabled xstate features 0x7, context size is 832 bytes, using 'standard' format. [ 0.363158] Freeing SMP alternatives memory: 40K [ 0.363285] pid_max: default: 32768 minimum: 301 [ 0.363846] LSM: Security Framework initializing [ 0.363968] SELinux: Initializing. [ 0.364108] Mount-cache hash table entries: 1024 (order: 1, 8192 bytes, linear) [ 0.364261] Mountpoint-cache hash table entries: 1024 (order: 1, 8192 bytes, linear) [ 0.364915] cpu 0 spinlock event irq 25 [ 0.365035] VPMU disabled by hypervisor. [ 0.365470] cblist_init_generic: Setting adjustable number of callback queues. [ 0.365616] cblist_init_generic: Setting shift to 3 and lim to 1. [ 0.365771] Performance Events: unsupported p6 CPU model 86 no PMU driver, software events only. [ 0.365829] signal: max sigframe size: 1776 [ 0.365992] rcu: Hierarchical SRCU implementation. [ 0.366124] rcu: Max phase no-delay instances is 400. [ 0.366616] smp: Bringing up secondary CPUs ... [ 0.366951] installing Xen timer for CPU 1 [ 0.367421] cpu 1 spinlock event irq 35 [ 0.367967] MDS CPU bug present and SMT on, data leak possible. See https://www.kernel.org/doc/html/latest/admin-guide/hw-vuln/mds.html for more details. [ 0.368134] TAA CPU bug present and SMT on, data leak possible. See https://www.kernel.org/doc/html/latest/admin-guide/hw-vuln/tsx_async_abort.html for more details. [ 0.368322] MMIO Stale Data CPU bug present and SMT on, data leak possible. See https://www.kernel.org/doc/html/latest/admin-guide/hw-vuln/processor_mmio_stale_data.html for more details. [ 0.369085] installing Xen timer for CPU 2 [ 0.369549] cpu 2 spinlock event irq 41 [ 0.369952] installing Xen timer for CPU 3 [ 0.370432] cpu 3 spinlock event irq 47 [ 0.370432] installing Xen timer for CPU 4 [ 0.371165] cpu 4 spinlock event irq 53 [ 0.371165] installing Xen timer for CPU 5 [ 0.372003] cpu 5 spinlock event irq 59 [ 0.372031] installing Xen timer for CPU 6 [ 0.372887] cpu 6 spinlock event irq 65 [ 0.373081] installing Xen timer for CPU 7 [ 0.373537] cpu 7 spinlock event irq 71 [ 0.374084] smp: Brought up 1 node, 8 CPUs [ 0.374204] smpboot: Max logical packages: 1 [ 0.374421] devtmpfs: initialized [ 0.374838] x86/mm: Memory block size: 128MB [ 0.375184] ACPI: PM: Registering ACPI NVS region [mem 0x799b7000-0x79e5afff] (4866048 bytes) [ 0.375184] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 1911260446275000 ns [ 0.375255] futex hash table entries: 2048 (order: 5, 131072 bytes, linear) [ 0.375959] PM: RTC time: 17:42:44, date: 2024-06-11 [ 0.376210] NET: Registered PF_NETLINK/PF_ROUTE protocol family [ 0.376357] xen:grant_table: Grant tables using version 1 layout [ 0.376500] Grant table initialized [ 0.376812] audit: initializing netlink subsys (disabled) [ 0.376961] audit: type=2000 audit(1718127764.955:1): state=initialized audit_enabled=0 res=1 [ 0.376961] thermal_sys: Registered thermal governor 'step_wise' [ 0.376961] thermal_sys: Registered thermal governor 'user_space' [ 0.377025] ACPI FADT declares the system doesn't support PCIe ASPM, so disable it [ 0.377860] PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0x80000000-0x8fffffff] (base 0x80000000) [ 0.378014] PCI: MMCONFIG at [mem 0x80000000-0x8fffffff] reserved in E820 [ 0.506794] PCI: Using configuration type 1 for base access [ 0.509554] kprobes: kprobe jump-optimization is enabled. All kprobes are optimized if possible. [ 0.509903] ACPI: Added _OSI(Module Device) [ 0.509992] ACPI: Added _OSI(Processor Device) [ 0.510109] ACPI: Added _OSI(3.0 _SCP Extensions) [ 0.510222] ACPI: Added _OSI(Processor Aggregator Device) [ 0.540679] ACPI: 4 ACPI AML tables successfully acquired and loaded [ 0.542674] xen: registering gsi 9 triggering 0 polarity 0 [ 0.545252] ACPI: Dynamic OEM Table Load: [ 0.552711] ACPI: Interpreter enabled [ 0.552842] ACPI: PM: (supports S0 S4 S5) [ 0.552955] ACPI: Using IOAPIC for interrupt routing [ 0.553141] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug [ 0.553291] PCI: Using E820 reservations for host bridge windows [ 0.553869] ACPI: Enabled 6 GPEs in block 00 to 3F [ 0.587528] ACPI: PCI Root Bridge [UNC0] (domain 0000 [bus ff]) [ 0.587658] acpi PNP0A03:03: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI HPX-Type3] [ 0.587903] acpi PNP0A03:03: _OSC: platform does not support [LTR] [ 0.588168] acpi PNP0A03:03: _OSC: OS now controls [PME PCIeCapability] [ 0.588289] acpi PNP0A03:03: FADT indicates ASPM is unsupported, using BIOS configuration [ 0.588465] PCI host bridge to bus 0000:ff [ 0.588578] pci_bus 0000:ff: root bus resource [bus ff] [ 0.588813] pci 0000:ff:0b.0: [8086:6f81] type 00 class 0x088000 [ 0.589279] pci 0000:ff:0b.1: [8086:6f36] type 00 class 0x110100 [ 0.589714] pci 0000:ff:0b.2: [8086:6f37] type 00 class 0x110100 [ 0.590181] pci 0000:ff:0b.3: [8086:6f76] type 00 class 0x088000 [ 0.590632] pci 0000:ff:0c.0: [8086:6fe0] type 00 class 0x088000 [ 0.591068] pci 0000:ff:0c.1: [8086:6fe1] type 00 class 0x088000 [ 0.591538] pci 0000:ff:0c.2: [8086:6fe2] type 00 class 0x088000 [ 0.591973] pci 0000:ff:0c.3: [8086:6fe3] type 00 class 0x088000 [ 0.592432] pci 0000:ff:0f.0: [8086:6ff8] type 00 class 0x088000 [ 0.592905] pci 0000:ff:0f.4: [8086:6ffc] type 00 class 0x088000 [ 0.593337] pci 0000:ff:0f.5: [8086:6ffd] type 00 class 0x088000 [ 0.593770] pci 0000:ff:0f.6: [8086:6ffe] type 00 class 0x088000 [ 0.594185] pci 0000:ff:10.0: [8086:6f1d] type 00 class 0x088000 [ 0.594617] pci 0000:ff:10.1: [8086:6f34] type 00 class 0x110100 [ 0.595065] pci 0000:ff:10.5: [8086:6f1e] type 00 class 0x088000 [ 0.595535] pci 0000:ff:10.6: [8086:6f7d] type 00 class 0x110100 [ 0.595967] pci 0000:ff:10.7: [8086:6f1f] type 00 class 0x088000 [ 0.596403] pci 0000:ff:12.0: [8086:6fa0] type 00 class 0x088000 [ 0.596660] pci 0000:ff:12.1: [8086:6f30] type 00 class 0x110100 [ 0.597172] pci 0000:ff:13.0: [8086:6fa8] type 00 class 0x088000 [ 0.597655] pci 0000:ff:13.1: [8086:6f71] type 00 class 0x088000 [ 0.598135] pci 0000:ff:13.2: [8086:6faa] type 00 class 0x088000 [ 0.598653] pci 0000:ff:13.3: [8086:6fab] type 00 class 0x088000 [ 0.599133] pci 0000:ff:13.4: [8086:6fac] type 00 class 0x088000 [ 0.599650] pci 0000:ff:13.5: [8086:6fad] type 00 class 0x088000 [ 0.600120] pci 0000:ff:13.6: [8086:6fae] type 00 class 0x088000 [ 0.600553] pci 0000:ff:13.7: [8086:6faf] type 00 class 0x088000 [ 0.601036] pci 0000:ff:14.0: [8086:6fb0] type 00 class 0x088000 [ 0.601513] pci 0000:ff:14.1: [8086:6fb1] type 00 class 0x088000 [ 0.601991] pci 0000:ff:14.2: [8086:6fb2] type 00 class 0x088000 [ 0.602508] pci 0000:ff:14.3: [8086:6fb3] type 00 class 0x088000 [ 0.602976] pci 0000:ff:14.4: [8086:6fbc] type 00 class 0x088000 [ 0.603410] pci 0000:ff:14.5: [8086:6fbd] type 00 class 0x088000 [ 0.603886] pci 0000:ff:14.6: [8086:6fbe] type 00 class 0x088000 [ 0.604318] pci 0000:ff:14.7: [8086:6fbf] type 00 class 0x088000 [ 0.604760] pci 0000:ff:15.0: [8086:6fb4] type 00 class 0x088000 [ 0.605226] pci 0000:ff:15.1: [8086:6fb5] type 00 class 0x088000 [ 0.605704] pci 0000:ff:15.2: [8086:6fb6] type 00 class 0x088000 [ 0.606186] pci 0000:ff:15.3: [8086:6fb7] type 00 class 0x088000 [ 0.606753] pci 0000:ff:1e.0: [8086:6f98] type 00 class 0x088000 [ 0.607141] pci 0000:ff:1e.1: [8086:6f99] type 00 class 0x088000 [ 0.607577] pci 0000:ff:1e.2: [8086:6f9a] type 00 class 0x088000 [ 0.608057] pci 0000:ff:1e.3: [8086:6fc0] type 00 class 0x088000 [ 0.608310] pci 0000:ff:1e.4: [8086:6f9c] type 00 class 0x088000 [ 0.608756] pci 0000:ff:1f.0: [8086:6f88] type 00 class 0x088000 [ 0.609186] pci 0000:ff:1f.2: [8086:6f8a] type 00 class 0x088000 [ 0.609621] pci_bus 0000:ff: on NUMA node 0 [ 0.614043] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-fe]) [ 0.614170] acpi PNP0A08:00: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI HPX-Type3] [ 0.614445] acpi PNP0A08:00: _OSC: platform does not support [PME LTR] [ 0.614832] acpi PNP0A08:00: _OSC: OS now controls [PCIeCapability] [ 0.614953] acpi PNP0A08:00: FADT indicates ASPM is unsupported, using BIOS configuration [ 0.615429] PCI host bridge to bus 0000:00 [ 0.615544] pci_bus 0000:00: root bus resource [io 0x0000-0x0cf7 window] [ 0.615665] pci_bus 0000:00: root bus resource [io 0x1000-0xffff window] [ 0.615785] pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff window] [ 0.615827] pci_bus 0000:00: root bus resource [mem 0x90000000-0xfbffbfff window] [ 0.616009] pci_bus 0000:00: root bus resource [bus 00-fe] [ 0.616189] pci 0000:00:00.0: [8086:6f00] type 00 class 0x060000 [ 0.616846] pci 0000:00:01.0: [8086:6f02] type 01 class 0x060400 [ 0.617425] pci 0000:00:01.0: PME# supported from D0 D3hot D3cold [ 0.617799] pci 0000:00:01.1: [8086:6f03] type 01 class 0x060400 [ 0.618241] pci 0000:00:01.1: PME# supported from D0 D3hot D3cold [ 0.618674] pci 0000:00:02.0: [8086:6f04] type 01 class 0x060400 [ 0.619204] pci 0000:00:02.0: PME# supported from D0 D3hot D3cold [ 0.619564] pci 0000:00:02.2: [8086:6f06] type 01 class 0x060400 [ 0.620136] pci 0000:00:02.2: PME# supported from D0 D3hot D3cold [ 0.620516] pci 0000:00:03.0: [8086:6f08] type 01 class 0x060400 [ 0.621056] pci 0000:00:03.0: PME# supported from D0 D3hot D3cold [ 0.621468] pci 0000:00:03.2: [8086:6f0a] type 01 class 0x060400 [ 0.622001] pci 0000:00:03.2: PME# supported from D0 D3hot D3cold [ 0.622375] pci 0000:00:05.0: [8086:6f28] type 00 class 0x088000 [ 0.623006] pci 0000:00:05.1: [8086:6f29] type 00 class 0x088000 [ 0.623643] pci 0000:00:05.2: [8086:6f2a] type 00 class 0x088000 [ 0.624368] pci 0000:00:14.0: [8086:8c31] type 00 class 0x0c0330 [ 0.624588] pci 0000:00:14.0: reg 0x10: [mem 0xfb600000-0xfb60ffff 64bit] [ 0.625057] pci 0000:00:14.0: PME# supported from D3hot D3cold [ 0.625405] pci 0000:00:16.0: [8086:8c3a] type 00 class 0x078000 [ 0.625664] pci 0000:00:16.0: reg 0x10: [mem 0xfb617000-0xfb61700f 64bit] [ 0.626137] pci 0000:00:16.0: PME# supported from D0 D3hot D3cold [ 0.626444] pci 0000:00:16.1: [8086:8c3b] type 00 class 0x078000 [ 0.626664] pci 0000:00:16.1: reg 0x10: [mem 0xfb616000-0xfb61600f 64bit] [ 0.627170] pci 0000:00:16.1: PME# supported from D0 D3hot D3cold [ 0.627536] pci 0000:00:1a.0: [8086:8c2d] type 00 class 0x0c0320 [ 0.627735] pci 0000:00:1a.0: reg 0x10: [mem 0xfb614000-0xfb6143ff] [ 0.628293] pci 0000:00:1a.0: PME# supported from D0 D3hot D3cold [ 0.628616] pci 0000:00:1c.0: [8086:8c10] type 01 class 0x060400 [ 0.629180] pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold [ 0.629381] pci 0000:00:1c.0: Enabling MPC IRBNCE [ 0.629543] pci 0000:00:1c.0: Intel PCH root port ACS workaround enabled [ 0.638002] pci 0000:00:1c.1: [8086:8c12] type 01 class 0x060400 [ 0.638610] pci 0000:00:1c.1: PME# supported from D0 D3hot D3cold [ 0.638807] pci 0000:00:1c.1: Enabling MPC IRBNCE [ 0.638836] pci 0000:00:1c.1: Intel PCH root port ACS workaround enabled [ 0.639130] pci 0000:00:1c.3: [8086:8c16] type 01 class 0x060400 [ 0.639737] pci 0000:00:1c.3: PME# supported from D0 D3hot D3cold [ 0.639905] pci 0000:00:1c.3: Enabling MPC IRBNCE [ 0.640027] pci 0000:00:1c.3: Intel PCH root port ACS workaround enabled [ 0.640315] pci 0000:00:1c.4: [8086:8c18] type 01 class 0x060400 [ 0.640884] pci 0000:00:1c.4: PME# supported from D0 D3hot D3cold [ 0.641118] pci 0000:00:1c.4: Enabling MPC IRBNCE [ 0.641240] pci 0000:00:1c.4: Intel PCH root port ACS workaround enabled [ 0.641569] pci 0000:00:1d.0: [8086:8c26] type 00 class 0x0c0320 [ 0.641768] pci 0000:00:1d.0: reg 0x10: [mem 0xfb613000-0xfb6133ff] [ 0.642255] pci 0000:00:1d.0: PME# supported from D0 D3hot D3cold [ 0.642620] pci 0000:00:1f.0: [8086:8c54] type 00 class 0x060100 [ 0.643388] pci 0000:00:1f.2: [8086:8c02] type 00 class 0x010601 [ 0.643584] pci 0000:00:1f.2: reg 0x10: [io 0xf070-0xf077] [ 0.643780] pci 0000:00:1f.2: reg 0x14: [io 0xf060-0xf063] [ 0.643869] pci 0000:00:1f.2: reg 0x18: [io 0xf050-0xf057] [ 0.644028] pci 0000:00:1f.2: reg 0x1c: [io 0xf040-0xf043] [ 0.644186] pci 0000:00:1f.2: reg 0x20: [io 0xf020-0xf03f] [ 0.644344] pci 0000:00:1f.2: reg 0x24: [mem 0xfb612000-0xfb6127ff] [ 0.644662] pci 0000:00:1f.2: PME# supported from D3hot [ 0.644988] pci 0000:00:1f.3: [8086:8c22] type 00 class 0x0c0500 [ 0.645208] pci 0000:00:1f.3: reg 0x10: [mem 0xfb611000-0xfb6110ff 64bit] [ 0.645456] pci 0000:00:1f.3: reg 0x20: [io 0xf000-0xf01f] [ 0.645843] pci 0000:00:1f.6: [8086:8c24] type 00 class 0x118000 [ 0.646064] pci 0000:00:1f.6: reg 0x10: [mem 0xfb610000-0xfb610fff 64bit] [ 0.646839] pci 0000:00:01.0: PCI bridge to [bus 01] [ 0.647139] pci 0000:00:01.1: PCI bridge to [bus 02] [ 0.647483] pci 0000:03:00.0: [8086:6f50] type 00 class 0x088000 [ 0.647737] pci 0000:03:00.0: reg 0x10: [mem 0xfb506000-0xfb507fff 64bit] [ 0.648476] pci 0000:03:00.1: [8086:6f51] type 00 class 0x088000 [ 0.648692] pci 0000:03:00.1: reg 0x10: [mem 0xfb504000-0xfb505fff 64bit] [ 0.649459] pci 0000:03:00.2: [8086:6f52] type 00 class 0x088000 [ 0.649674] pci 0000:03:00.2: reg 0x10: [mem 0xfb502000-0xfb503fff 64bit] [ 0.650396] pci 0000:03:00.3: [8086:6f53] type 00 class 0x088000 [ 0.650650] pci 0000:03:00.3: reg 0x10: [mem 0xfb500000-0xfb501fff 64bit] [ 0.651365] pci 0000:00:02.0: PCI bridge to [bus 03] [ 0.651500] pci 0000:00:02.0: bridge window [mem 0xfb500000-0xfb5fffff] [ 0.651882] pci 0000:04:00.0: [8086:15ac] type 00 class 0x020000 [ 0.652097] pci 0000:04:00.0: reg 0x10: [mem 0xfbc00000-0xfbdfffff 64bit pref] [ 0.652385] pci 0000:04:00.0: reg 0x20: [mem 0xfbe04000-0xfbe07fff 64bit pref] [ 0.652570] pci 0000:04:00.0: reg 0x30: [mem 0xfb480000-0xfb4fffff pref] [ 0.652928] pci 0000:04:00.0: PME# supported from D0 D3hot D3cold [ 0.653192] pci 0000:04:00.0: reg 0x184: [mem 0x00000000-0x00003fff 64bit] [ 0.653313] pci 0000:04:00.0: VF(n) BAR0 space: [mem 0x00000000-0x000fffff 64bit] (contains BAR0 for 64 VFs) [ 0.653518] pci 0000:04:00.0: reg 0x190: [mem 0x00000000-0x00003fff 64bit] [ 0.653638] pci 0000:04:00.0: VF(n) BAR3 space: [mem 0x00000000-0x000fffff 64bit] (contains BAR3 for 64 VFs) [ 0.654228] pci 0000:04:00.1: [8086:15ac] type 00 class 0x020000 [ 0.654444] pci 0000:04:00.1: reg 0x10: [mem 0xfba00000-0xfbbfffff 64bit pref] [ 0.654772] pci 0000:04:00.1: reg 0x20: [mem 0xfbe00000-0xfbe03fff 64bit pref] [ 0.654868] pci 0000:04:00.1: reg 0x30: [mem 0xfb400000-0xfb47ffff pref] [ 0.655224] pci 0000:04:00.1: PME# supported from D0 D3hot D3cold [ 0.655429] pci 0000:04:00.1: reg 0x184: [mem 0x00000000-0x00003fff 64bit] [ 0.655550] pci 0000:04:00.1: VF(n) BAR0 space: [mem 0x00000000-0x000fffff 64bit] (contains BAR0 for 64 VFs) [ 0.655754] pci 0000:04:00.1: reg 0x190: [mem 0x00000000-0x00003fff 64bit] [ 0.655827] pci 0000:04:00.1: VF(n) BAR3 space: [mem 0x00000000-0x000fffff 64bit] (contains BAR3 for 64 VFs) [ 0.656396] pci 0000:00:02.2: PCI bridge to [bus 04] [ 0.656532] pci 0000:00:02.2: bridge window [mem 0xfb400000-0xfb4fffff] [ 0.656670] pci 0000:00:02.2: bridge window [mem 0xfba00000-0xfbefffff 64bit pref] [ 0.656970] pci 0000:00:03.0: PCI bridge to [bus 05] [ 0.657308] pci 0000:00:03.2: PCI bridge to [bus 06] [ 0.657678] pci 0000:07:00.0: working around ROM BAR overlap defect [ 0.657797] pci 0000:07:00.0: [8086:1533] type 00 class 0x020000 [ 0.657917] pci 0000:07:00.0: reg 0x10: [mem 0xfb300000-0xfb37ffff] [ 0.658135] pci 0000:07:00.0: reg 0x18: [io 0xe000-0xe01f] [ 0.658301] pci 0000:07:00.0: reg 0x1c: [mem 0xfb380000-0xfb383fff] [ 0.658882] pci 0000:07:00.0: PME# supported from D0 D3hot D3cold [ 0.659351] pci 0000:00:1c.0: PCI bridge to [bus 07] [ 0.659476] pci 0000:00:1c.0: bridge window [io 0xe000-0xefff] [ 0.659605] pci 0000:00:1c.0: bridge window [mem 0xfb300000-0xfb3fffff] [ 0.660007] pci 0000:08:00.0: working around ROM BAR overlap defect [ 0.660126] pci 0000:08:00.0: [8086:1533] type 00 class 0x020000 [ 0.660334] pci 0000:08:00.0: reg 0x10: [mem 0xfb200000-0xfb27ffff] [ 0.660553] pci 0000:08:00.0: reg 0x18: [io 0xd000-0xd01f] [ 0.660718] pci 0000:08:00.0: reg 0x1c: [mem 0xfb280000-0xfb283fff] [ 0.661287] pci 0000:08:00.0: PME# supported from D0 D3hot D3cold [ 0.661758] pci 0000:00:1c.1: PCI bridge to [bus 08] [ 0.661837] pci 0000:00:1c.1: bridge window [io 0xd000-0xdfff] [ 0.661966] pci 0000:00:1c.1: bridge window [mem 0xfb200000-0xfb2fffff] [ 0.662311] pci 0000:09:00.0: [1a03:1150] type 01 class 0x060400 [ 0.662750] pci 0000:09:00.0: enabling Extended Tags [ 0.663059] pci 0000:09:00.0: supports D1 D2 [ 0.663173] pci 0000:09:00.0: PME# supported from D0 D1 D2 D3hot D3cold [ 0.663534] pci 0000:00:1c.3: PCI bridge to [bus 09-0a] [ 0.663661] pci 0000:00:1c.3: bridge window [io 0xc000-0xcfff] [ 0.663789] pci 0000:00:1c.3: bridge window [mem 0xfa000000-0xfb0fffff] [ 0.664015] pci_bus 0000:0a: extended config space not accessible [ 0.664187] pci 0000:0a:00.0: [1a03:2000] type 00 class 0x030000 [ 0.664394] pci 0000:0a:00.0: reg 0x10: [mem 0xfa000000-0xfaffffff] [ 0.664562] pci 0000:0a:00.0: reg 0x14: [mem 0xfb000000-0xfb01ffff] [ 0.664730] pci 0000:0a:00.0: reg 0x18: [io 0xc000-0xc07f] [ 0.665108] pci 0000:0a:00.0: Video device with shadowed ROM at [mem 0x000c0000-0x000dffff] [ 0.665402] pci 0000:0a:00.0: supports D1 D2 [ 0.665514] pci 0000:0a:00.0: PME# supported from D0 D1 D2 D3hot D3cold [ 0.665960] pci 0000:09:00.0: PCI bridge to [bus 0a] [ 0.666099] pci 0000:09:00.0: bridge window [io 0xc000-0xcfff] [ 0.666229] pci 0000:09:00.0: bridge window [mem 0xfa000000-0xfb0fffff] [ 0.666667] pci 0000:0b:00.0: [8086:1521] type 00 class 0x020000 [ 0.666873] pci 0000:0b:00.0: reg 0x10: [mem 0xfb160000-0xfb17ffff] [ 0.667084] pci 0000:0b:00.0: reg 0x18: [io 0xb060-0xb07f] [ 0.667246] pci 0000:0b:00.0: reg 0x1c: [mem 0xfb18c000-0xfb18ffff] [ 0.667772] pci 0000:0b:00.0: PME# supported from D0 D3hot D3cold [ 0.667945] pci 0000:0b:00.0: reg 0x184: [mem 0x00000000-0x00003fff 64bit pref] [ 0.668090] pci 0000:0b:00.0: VF(n) BAR0 space: [mem 0x00000000-0x0001ffff 64bit pref] (contains BAR0 for 8 VFs) [ 0.668309] pci 0000:0b:00.0: reg 0x190: [mem 0x00000000-0x00003fff 64bit pref] [ 0.668452] pci 0000:0b:00.0: VF(n) BAR3 space: [mem 0x00000000-0x0001ffff 64bit pref] (contains BAR3 for 8 VFs) [ 0.669024] pci 0000:0b:00.1: [8086:1521] type 00 class 0x020000 [ 0.669266] pci 0000:0b:00.1: reg 0x10: [mem 0xfb140000-0xfb15ffff] [ 0.669478] pci 0000:0b:00.1: reg 0x18: [io 0xb040-0xb05f] [ 0.669640] pci 0000:0b:00.1: reg 0x1c: [mem 0xfb188000-0xfb18bfff] [ 0.670165] pci 0000:0b:00.1: PME# supported from D0 D3hot D3cold [ 0.670397] pci 0000:0b:00.1: reg 0x184: [mem 0x00000000-0x00003fff 64bit pref] [ 0.670578] pci 0000:0b:00.1: VF(n) BAR0 space: [mem 0x00000000-0x0001ffff 64bit pref] (contains BAR0 for 8 VFs) [ 0.670797] pci 0000:0b:00.1: reg 0x190: [mem 0x00000000-0x00003fff 64bit pref] [ 0.670827] pci 0000:0b:00.1: VF(n) BAR3 space: [mem 0x00000000-0x0001ffff 64bit pref] (contains BAR3 for 8 VFs) [ 0.671352] pci 0000:0b:00.2: [8086:1521] type 00 class 0x020000 [ 0.671561] pci 0000:0b:00.2: reg 0x10: [mem 0xfb120000-0xfb13ffff] [ 0.671812] pci 0000:0b:00.2: reg 0x18: [io 0xb020-0xb03f] [ 0.671873] pci 0000:0b:00.2: reg 0x1c: [mem 0xfb184000-0xfb187fff] [ 0.672397] pci 0000:0b:00.2: PME# supported from D0 D3hot D3cold [ 0.672629] pci 0000:0b:00.2: reg 0x184: [mem 0x00000000-0x00003fff 64bit pref] [ 0.672773] pci 0000:0b:00.2: VF(n) BAR0 space: [mem 0x00000000-0x0001ffff 64bit pref] (contains BAR0 for 8 VFs) [ 0.672931] pci 0000:0b:00.2: reg 0x190: [mem 0x00000000-0x00003fff 64bit pref] [ 0.673075] pci 0000:0b:00.2: VF(n) BAR3 space: [mem 0x00000000-0x0001ffff 64bit pref] (contains BAR3 for 8 VFs) [ 0.673601] pci 0000:0b:00.3: [8086:1521] type 00 class 0x020000 [ 0.673804] pci 0000:0b:00.3: reg 0x10: [mem 0xfb100000-0xfb11ffff] [ 0.674919] pci 0000:0b:00.3: reg 0x18: [io 0xb000-0xb01f] [ 0.675082] pci 0000:0b:00.3: reg 0x1c: [mem 0xfb180000-0xfb183fff] [ 0.675642] pci 0000:0b:00.3: PME# supported from D0 D3hot D3cold [ 0.675877] pci 0000:0b:00.3: reg 0x184: [mem 0x00000000-0x00003fff 64bit pref] [ 0.676021] pci 0000:0b:00.3: VF(n) BAR0 space: [mem 0x00000000-0x0001ffff 64bit pref] (contains BAR0 for 8 VFs) [ 0.676239] pci 0000:0b:00.3: reg 0x190: [mem 0x00000000-0x00003fff 64bit pref] [ 0.676383] pci 0000:0b:00.3: VF(n) BAR3 space: [mem 0x00000000-0x0001ffff 64bit pref] (contains BAR3 for 8 VFs) [ 0.676978] pci 0000:00:1c.4: PCI bridge to [bus 0b] [ 0.677104] pci 0000:00:1c.4: bridge window [io 0xb000-0xbfff] [ 0.677233] pci 0000:00:1c.4: bridge window [mem 0xfb100000-0xfb1fffff] [ 0.677372] pci 0000:00:1c.4: bridge has subordinate 0b but max busn 0c [ 0.677851] pci_bus 0000:00: on NUMA node 0 [ 0.677985] xen: registering gsi 13 triggering 1 polarity 0 [ 0.678968] ACPI: PCI: Interrupt link LNKA configured for IRQ 11 [ 0.679165] ACPI: PCI: Interrupt link LNKB configured for IRQ 10 [ 0.679398] ACPI: PCI: Interrupt link LNKC configured for IRQ 5 [ 0.679589] ACPI: PCI: Interrupt link LNKD configured for IRQ 11 [ 0.679781] ACPI: PCI: Interrupt link LNKE configured for IRQ 0 [ 0.679827] ACPI: PCI: Interrupt link LNKE disabled [ 0.680016] ACPI: PCI: Interrupt link LNKF configured for IRQ 0 [ 0.680134] ACPI: PCI: Interrupt link LNKF disabled [ 0.680320] ACPI: PCI: Interrupt link LNKG configured for IRQ 0 [ 0.680439] ACPI: PCI: Interrupt link LNKG disabled [ 0.680664] ACPI: PCI: Interrupt link LNKH configured for IRQ 0 [ 0.680782] ACPI: PCI: Interrupt link LNKH disabled [ 0.680979] xen:balloon: Initialising balloon driver [ 0.681117] iommu: Default domain type: Translated [ 0.688831] iommu: DMA domain TLB invalidation policy: lazy mode [ 0.689017] SCSI subsystem initialized [ 0.689144] libata version 3.00 loaded. [ 0.689144] ACPI: bus type USB registered [ 0.689144] usbcore: registered new interface driver usbfs [ 0.689144] usbcore: registered new interface driver hub [ 0.689233] usbcore: registered new device driver usb [ 0.689360] pps_core: LinuxPPS API ver. 1 registered [ 0.689827] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti [ 0.689978] PTP clock support registered [ 0.690113] Advanced Linux Sound Architecture Driver Initialized. [ 0.690119] NetLabel: Initializing [ 0.690230] NetLabel: domain hash size = 128 [ 0.690343] NetLabel: protocols = UNLABELED CIPSOv4 CALIPSO [ 0.690843] NetLabel: unlabeled traffic allowed by default [ 0.690981] PCI: Using ACPI for IRQ routing [ 0.728855] PCI: pci_cache_line_size set to 64 bytes [ 0.729660] e820: reserve RAM buffer [mem 0x0009a000-0x0009ffff] [ 0.729663] e820: reserve RAM buffer [mem 0x20066000-0x23ffffff] [ 0.729865] pci 0000:0a:00.0: vgaarb: setting as boot VGA device [ 0.729986] pci 0000:0a:00.0: vgaarb: bridge control possible [ 0.730103] pci 0000:0a:00.0: vgaarb: VGA device added: decodes=io+mem,owns=io+mem,locks=none [ 0.730103] vgaarb: loaded [ 0.731825] clocksource: Switched to clocksource tsc-early [ 0.732071] VFS: Disk quotas dquot_6.6.0 [ 0.732196] VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes) [ 0.732340] hugetlbfs: disabling because there are no supported hugepage sizes [ 0.732500] pnp: PnP ACPI init [ 0.733052] xen: registering gsi 8 triggering 1 polarity 0 [ 0.733249] system 00:01: [io 0x0500-0x057f] has been reserved [ 0.733376] system 00:01: [io 0x0400-0x047f] has been reserved [ 0.733495] system 00:01: [io 0x0580-0x059f] has been reserved [ 0.733613] system 00:01: [io 0x0600-0x061f] has been reserved [ 0.733731] system 00:01: [io 0x0880-0x0883] has been reserved [ 0.733868] system 00:01: [io 0x0800-0x081f] has been reserved [ 0.734003] system 00:01: [mem 0xfed1c000-0xfed3ffff] could not be reserved [ 0.734166] system 00:01: [mem 0xfed45000-0xfed8bfff] has been reserved [ 0.734286] system 00:01: [mem 0xff000000-0xffffffff] has been reserved [ 0.734406] system 00:01: [mem 0xfee00000-0xfeefffff] has been reserved [ 0.734526] system 00:01: [mem 0xfed12000-0xfed1200f] has been reserved [ 0.734645] system 00:01: [mem 0xfed12010-0xfed1201f] has been reserved [ 0.734765] system 00:01: [mem 0xfed1b000-0xfed1bfff] has been reserved [ 0.735183] system 00:02: [io 0x0a00-0x0a0f] has been reserved [ 0.735312] system 00:02: [io 0x0a10-0x0a1f] has been reserved [ 0.735469] system 00:02: [io 0x0a20-0x0a2f] has been reserved [ 0.735587] system 00:02: [io 0x0a30-0x0a3f] has been reserved [ 0.735705] system 00:02: [io 0x0a40-0x0a4f] has been reserved [ 0.736154] xen: registering gsi 4 triggering 1 polarity 0 [ 0.736159] Already setup the GSI :4 [ 0.736272] pnp 00:03: [dma 0 disabled] [ 0.736588] xen: registering gsi 3 triggering 1 polarity 0 [ 0.736599] pnp 00:04: [dma 0 disabled] [ 0.737258] pnp: PnP ACPI: found 5 devices [ 0.769695] PM-Timer failed consistency check (0xffffff) - aborting. [ 0.769920] NET: Registered PF_INET protocol family [ 0.770087] IP idents hash table entries: 8192 (order: 4, 65536 bytes, linear) [ 0.770493] tcp_listen_portaddr_hash hash table entries: 256 (order: 0, 4096 bytes, linear) [ 0.770643] Table-perturb hash table entries: 65536 (order: 6, 262144 bytes, linear) [ 0.770790] TCP established hash table entries: 4096 (order: 3, 32768 bytes, linear) [ 0.770987] TCP bind hash table entries: 4096 (order: 5, 131072 bytes, linear) [ 0.771164] TCP: Hash tables configured (established 4096 bind 4096) [ 0.771329] UDP hash table entries: 256 (order: 1, 8192 bytes, linear) [ 0.771452] UDP-Lite hash table entries: 256 (order: 1, 8192 bytes, linear) [ 0.771643] NET: Registered PF_UNIX/PF_LOCAL protocol family [ 0.772075] RPC: Registered named UNIX socket transport module. [ 0.772202] RPC: Registered udp transport module. [ 0.772315] RPC: Registered tcp transport module. [ 0.772429] RPC: Registered tcp NFSv4.1 backchannel transport module. [ 0.772990] pci 0000:00:1c.4: bridge window [mem 0x00100000-0x000fffff 64bit pref] to [bus 0b] add_size 100000 add_align 100000 [ 0.773163] clipped [mem size 0x00000000 64bit pref] to [mem size 0xfffffffffffa0000 64bit pref] for e820 entry [mem 0x0009ac00-0x000fffff] [ 0.773326] clipped [mem size 0x00020000 64bit pref] to [mem size 0xfffffffffffc0000 64bit pref] for e820 entry [mem 0x0009ac00-0x000fffff] [ 0.773487] pci 0000:00:1c.4: BAR 15: assigned [mem 0x90000000-0x900fffff 64bit pref] [ 0.773633] pci 0000:00:01.0: PCI bridge to [bus 01] [ 0.773810] pci 0000:00:01.1: PCI bridge to [bus 02] [ 0.774010] pci 0000:00:02.0: PCI bridge to [bus 03] [ 0.774147] pci 0000:00:02.0: bridge window [mem 0xfb500000-0xfb5fffff] [ 0.774311] pci 0000:04:00.0: BAR 7: no space for [mem size 0x00100000 64bit] [ 0.774435] pci 0000:04:00.0: BAR 7: failed to assign [mem size 0x00100000 64bit] [ 0.774579] pci 0000:04:00.0: BAR 10: no space for [mem size 0x00100000 64bit] [ 0.774722] pci 0000:04:00.0: BAR 10: failed to assign [mem size 0x00100000 64bit] [ 0.774887] pci 0000:04:00.1: BAR 7: no space for [mem size 0x00100000 64bit] [ 0.775021] pci 0000:04:00.1: BAR 7: failed to assign [mem size 0x00100000 64bit] [ 0.775166] pci 0000:04:00.1: BAR 10: no space for [mem size 0x00100000 64bit] [ 0.775309] pci 0000:04:00.1: BAR 10: failed to assign [mem size 0x00100000 64bit] [ 0.775454] pci 0000:04:00.0: BAR 7: no space for [mem size 0x00100000 64bit] [ 0.775577] pci 0000:04:00.0: BAR 7: failed to assign [mem size 0x00100000 64bit] [ 0.775727] pci 0000:04:00.0: BAR 10: no space for [mem size 0x00100000 64bit] [ 0.775884] pci 0000:04:00.0: BAR 10: failed to assign [mem size 0x00100000 64bit] [ 0.776029] pci 0000:04:00.1: BAR 7: no space for [mem size 0x00100000 64bit] [ 0.776151] pci 0000:04:00.1: BAR 7: failed to assign [mem size 0x00100000 64bit] [ 0.776295] pci 0000:04:00.1: BAR 10: no space for [mem size 0x00100000 64bit] [ 0.776438] pci 0000:04:00.1: BAR 10: failed to assign [mem size 0x00100000 64bit] [ 0.776588] pci 0000:00:02.2: PCI bridge to [bus 04] [ 0.776722] pci 0000:00:02.2: bridge window [mem 0xfb400000-0xfb4fffff] [ 0.776865] pci 0000:00:02.2: bridge window [mem 0xfba00000-0xfbefffff 64bit pref] [ 0.777053] pci 0000:00:03.0: PCI bridge to [bus 05] [ 0.777234] pci 0000:00:03.2: PCI bridge to [bus 06] [ 0.777409] pci 0000:00:1c.0: PCI bridge to [bus 07] [ 0.777529] pci 0000:00:1c.0: bridge window [io 0xe000-0xefff] [ 0.777669] pci 0000:00:1c.0: bridge window [mem 0xfb300000-0xfb3fffff] [ 0.777844] pci 0000:00:1c.1: PCI bridge to [bus 08] [ 0.777977] pci 0000:00:1c.1: bridge window [io 0xd000-0xdfff] [ 0.778118] pci 0000:00:1c.1: bridge window [mem 0xfb200000-0xfb2fffff] [ 0.778281] pci 0000:09:00.0: PCI bridge to [bus 0a] [ 0.778402] pci 0000:09:00.0: bridge window [io 0xc000-0xcfff] [ 0.778550] pci 0000:09:00.0: bridge window [mem 0xfa000000-0xfb0fffff] [ 0.778716] pci 0000:00:1c.3: PCI bridge to [bus 09-0a] [ 0.778853] pci 0000:00:1c.3: bridge window [io 0xc000-0xcfff] [ 0.779008] pci 0000:00:1c.3: bridge window [mem 0xfa000000-0xfb0fffff] [ 0.779189] pci 0000:0b:00.0: BAR 7: assigned [mem 0x90000000-0x9001ffff 64bit pref] [ 0.779346] pci 0000:0b:00.0: BAR 10: assigned [mem 0x90020000-0x9003ffff 64bit pref] [ 0.779500] pci 0000:0b:00.1: BAR 7: assigned [mem 0x90040000-0x9005ffff 64bit pref] [ 0.779652] pci 0000:0b:00.1: BAR 10: assigned [mem 0x90060000-0x9007ffff 64bit pref] [ 0.779805] pci 0000:0b:00.2: BAR 7: assigned [mem 0x90080000-0x9009ffff 64bit pref] [ 0.779984] pci 0000:0b:00.2: BAR 10: assigned [mem 0x900a0000-0x900bffff 64bit pref] [ 0.780139] pci 0000:0b:00.3: BAR 7: assigned [mem 0x900c0000-0x900dffff 64bit pref] [ 0.780291] pci 0000:0b:00.3: BAR 10: assigned [mem 0x900e0000-0x900fffff 64bit pref] [ 0.780444] pci 0000:00:1c.4: PCI bridge to [bus 0b] [ 0.780564] pci 0000:00:1c.4: bridge window [io 0xb000-0xbfff] [ 0.780703] pci 0000:00:1c.4: bridge window [mem 0xfb100000-0xfb1fffff] [ 0.780850] pci 0000:00:1c.4: bridge window [mem 0x90000000-0x900fffff 64bit pref] [ 0.781038] pci_bus 0000:00: Some PCI device resources are unassigned, try booting with pci=realloc [ 0.781189] pci_bus 0000:00: resource 4 [io 0x0000-0x0cf7 window] [ 0.781314] pci_bus 0000:00: resource 5 [io 0x1000-0xffff window] [ 0.781433] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff window] [ 0.781553] pci_bus 0000:00: resource 7 [mem 0x90000000-0xfbffbfff window] [ 0.781674] pci_bus 0000:03: resource 1 [mem 0xfb500000-0xfb5fffff] [ 0.781793] pci_bus 0000:04: resource 1 [mem 0xfb400000-0xfb4fffff] [ 0.781939] pci_bus 0000:04: resource 2 [mem 0xfba00000-0xfbefffff 64bit pref] [ 0.782086] pci_bus 0000:07: resource 0 [io 0xe000-0xefff] [ 0.782202] pci_bus 0000:07: resource 1 [mem 0xfb300000-0xfb3fffff] [ 0.782321] pci_bus 0000:08: resource 0 [io 0xd000-0xdfff] [ 0.782437] pci_bus 0000:08: resource 1 [mem 0xfb200000-0xfb2fffff] [ 0.782555] pci_bus 0000:09: resource 0 [io 0xc000-0xcfff] [ 0.782677] pci_bus 0000:09: resource 1 [mem 0xfa000000-0xfb0fffff] [ 0.782796] pci_bus 0000:0a: resource 0 [io 0xc000-0xcfff] [ 0.782925] pci_bus 0000:0a: resource 1 [mem 0xfa000000-0xfb0fffff] [ 0.783044] pci_bus 0000:0b: resource 0 [io 0xb000-0xbfff] [ 0.783160] pci_bus 0000:0b: resource 1 [mem 0xfb100000-0xfb1fffff] [ 0.783279] pci_bus 0000:0b: resource 2 [mem 0x90000000-0x900fffff 64bit pref] [ 0.783838] pci 0000:00:05.0: disabled boot interrupts on device [8086:6f28] [ 0.784075] xen: registering gsi 19 triggering 0 polarity 1 [ 0.784104] xen: --> pirq=19 -> irq=19 (gsi=19) [ 2.941234] pci 0000:00:14.0: quirk_usb_early_handoff+0x0/0x720 took 2106677 usecs [ 2.941471] xen: registering gsi 18 triggering 0 polarity 1 [ 2.941490] xen: --> pirq=18 -> irq=18 (gsi=18) [ 2.957099] pci 0000:00:1a.0: quirk_usb_early_handoff+0x0/0x720 took 15315 usecs [ 2.957343] xen: registering gsi 18 triggering 0 polarity 1 [ 2.957349] Already setup the GSI :18 [ 2.974228] pci 0000:00:1d.0: quirk_usb_early_handoff+0x0/0x720 took 16541 usecs [ 2.974469] pci 0000:04:00.0: CLS mismatch (64 != 32), using 64 bytes [ 2.974611] PCI-DMA: Using software bounce buffering for IO (SWIOTLB) [ 2.974696] Unpacking initramfs... [ 2.974732] software IO TLB: mapped [mem 0x000000001b180000-0x000000001f180000] (64MB) [ 2.982753] kvm: no hardware support for 'kvm_intel' [ 2.982900] has_svm: not amd or hygon [ 2.983016] kvm: no hardware support for 'kvm_amd' [ 2.983132] clocksource: tsc: mask: 0xffffffffffffffff max_cycles: 0x1fb62f12e8c, max_idle_ns: 440795238402 ns [ 2.983398] clocksource: Switched to clocksource tsc [ 2.986279] Initialise system trusted keyrings [ 2.986644] workingset: timestamp_bits=62 max_order=17 bucket_order=0 [ 2.988215] NFS: Registering the id_resolver key type [ 2.988342] Key type id_resolver registered [ 2.988454] Key type id_legacy registered [ 2.988656] 9p: Installing v9fs 9p2000 file system support [ 3.002841] Key type asymmetric registered [ 3.002968] Asymmetric key parser 'x509' registered [ 3.003105] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 251) [ 3.003260] io scheduler mq-deadline registered [ 3.003375] io scheduler kyber registered [ 3.004240] xen: registering gsi 16 triggering 0 polarity 1 [ 3.004272] xen: --> pirq=16 -> irq=16 (gsi=16) [ 3.004863] xen: registering gsi 16 triggering 0 polarity 1 [ 3.004870] Already setup the GSI :16 [ 3.005545] xen: registering gsi 16 triggering 0 polarity 1 [ 3.005553] Already setup the GSI :16 [ 3.005884] xen: registering gsi 16 triggering 0 polarity 1 [ 3.005888] Already setup the GSI :16 [ 3.006212] xen: registering gsi 16 triggering 0 polarity 1 [ 3.006216] Already setup the GSI :16 [ 3.006901] xen: registering gsi 16 triggering 0 polarity 1 [ 3.006907] Already setup the GSI :16 [ 3.007533] xen: registering gsi 16 triggering 0 polarity 1 [ 3.007538] Already setup the GSI :16 [ 3.007991] xen: registering gsi 17 triggering 0 polarity 1 [ 3.008007] xen: --> pirq=17 -> irq=17 (gsi=17) [ 3.008367] xen: registering gsi 19 triggering 0 polarity 1 [ 3.008372] Already setup the GSI :19 [ 3.008836] xen: registering gsi 16 triggering 0 polarity 1 [ 3.008840] Already setup the GSI :16 [ 3.009501] input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input0 [ 3.009715] ACPI: button: Power Button [PWRB] [ 3.009858] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input1 [ 3.010045] ACPI: button: Power Button [PWRF] [ 3.010292] Monitor-Mwait will be used to enter C-1 state [ 3.010304] Monitor-Mwait will be used to enter C-2 state [ 3.010311] ACPI: \_SB_.SCK0.CP00: Found 2 idle states [ 3.010681] ACPI: \_SB_.SCK0.CP01: Found 2 idle states [ 3.011070] ACPI: \_SB_.SCK0.CP02: Found 2 idle states [ 3.011487] ACPI: \_SB_.SCK0.CP03: Found 2 idle states [ 3.012144] ACPI: \_SB_.SCK0.CP04: Found 2 idle states [ 3.012693] ACPI: \_SB_.SCK0.CP05: Found 2 idle states [ 3.013128] ACPI: \_SB_.SCK0.CP06: Found 2 idle states [ 3.026632] ACPI: \_SB_.SCK0.CP07: Found 2 idle states [ 3.027671] xen:xen_evtchn: Event-channel device installed [ 3.027869] xen_pciback: backend is vpci [ 3.028682] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled [ 3.028999] 00:04: ttyS1 at I/O 0x2f8 (irq = 3, base_baud = 115200) is a 16550A [ 3.029719] hpet_acpi_add: no address or irqs in _CRS [ 3.029933] Non-volatile memory driver v1.3 [ 3.030046] AMD-Vi: AMD IOMMUv2 functionality not available on this system - This is not a bug. [ 3.032710] loop: module loaded [ 3.039574] ahci 0000:00:1f.2: version 3.0 [ 3.039682] xen: registering gsi 16 triggering 0 polarity 1 [ 3.039693] Already setup the GSI :16 [ 3.040023] ahci 0000:00:1f.2: AHCI 0001.0300 32 slots 6 ports 6 Gbps 0x3f impl SATA mode [ 3.040179] ahci 0000:00:1f.2: flags: 64bit ncq led clo pio ems apst [ 3.056170] scsi host0: ahci [ 3.056574] scsi host1: ahci [ 3.056903] scsi host2: ahci [ 3.057263] scsi host3: ahci [ 3.057648] scsi host4: ahci [ 3.057968] scsi host5: ahci [ 3.058145] ata1: SATA max UDMA/133 abar m2048@0xfb612000 port 0xfb612100 irq 74 [ 3.058291] ata2: SATA max UDMA/133 abar m2048@0xfb612000 port 0xfb612180 irq 74 [ 3.058435] ata3: SATA max UDMA/133 abar m2048@0xfb612000 port 0xfb612200 irq 74 [ 3.058594] ata4: SATA max UDMA/133 abar m2048@0xfb612000 port 0xfb612280 irq 74 [ 3.058738] ata5: SATA max UDMA/133 abar m2048@0xfb612000 port 0xfb612300 irq 74 [ 3.058882] ata6: SATA max UDMA/133 abar m2048@0xfb612000 port 0xfb612380 irq 74 [ 3.059309] tun: Universal TUN/TAP device driver, 1.6 [ 3.059591] e100: Intel(R) PRO/100 Network Driver [ 3.059711] e100: Copyright(c) 1999-2006 Intel Corporation [ 3.059848] sky2: driver version 1.30 [ 3.060033] xen_netfront: Initialising Xen virtual ethernet driver [ 3.060422] xen: registering gsi 18 triggering 0 polarity 1 [ 3.060432] Already setup the GSI :18 [ 3.060658] ehci-pci 0000:00:1a.0: EHCI Host Controller [ 3.060879] ehci-pci 0000:00:1a.0: new USB bus registered, assigned bus number 1 [ 3.061057] ehci-pci 0000:00:1a.0: debug port 2 [ 3.065200] ehci-pci 0000:00:1a.0: irq 18, io mem 0xfb614000 [ 3.071567] ehci-pci 0000:00:1a.0: USB 2.0 started, EHCI 1.00 [ 3.071796] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 6.01 [ 3.071982] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 3.072126] usb usb1: Product: EHCI Host Controller [ 3.072240] usb usb1: Manufacturer: Linux 6.1.92+ ehci_hcd [ 3.072355] usb usb1: SerialNumber: 0000:00:1a.0 [ 3.072672] hub 1-0:1.0: USB hub found [ 3.072797] hub 1-0:1.0: 2 ports detected [ 3.073163] xen: registering gsi 18 triggering 0 polarity 1 [ 3.073172] Already setup the GSI :18 [ 3.073403] ehci-pci 0000:00:1d.0: EHCI Host Controller [ 3.073611] ehci-pci 0000:00:1d.0: new USB bus registered, assigned bus number 2 [ 3.073788] ehci-pci 0000:00:1d.0: debug port 2 [ 3.077894] ehci-pci 0000:00:1d.0: irq 18, io mem 0xfb613000 [ 3.079911] Freeing initrd memory: 19884K [ 3.084538] ehci-pci 0000:00:1d.0: USB 2.0 started, EHCI 1.00 [ 3.084755] usb usb2: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 6.01 [ 3.084902] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 3.085045] usb usb2: Product: EHCI Host Controller [ 3.085159] usb usb2: Manufacturer: Linux 6.1.92+ ehci_hcd [ 3.085274] usb usb2: SerialNumber: 0000:00:1d.0 [ 3.085579] hub 2-0:1.0: USB hub found [ 3.085704] hub 2-0:1.0: 2 ports detected [ 3.086174] xen: registering gsi 19 triggering 0 polarity 1 [ 3.086184] Already setup the GSI :19 [ 3.086391] xhci_hcd 0000:00:14.0: xHCI Host Controller [ 3.086589] xhci_hcd 0000:00:14.0: new USB bus registered, assigned bus number 3 [ 3.087807] xhci_hcd 0000:00:14.0: hcc params 0x200077c1 hci version 0x100 quirks 0x0000000000009810 [ 3.088270] xhci_hcd 0000:00:14.0: xHCI Host Controller [ 3.088468] xhci_hcd 0000:00:14.0: new USB bus registered, assigned bus number 4 [ 3.088669] xhci_hcd 0000:00:14.0: Host supports USB 3.0 SuperSpeed [ 3.088874] usb usb3: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 6.01 [ 3.089021] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 3.089164] usb usb3: Product: xHCI Host Controller [ 3.089278] usb usb3: Manufacturer: Linux 6.1.92+ xhci-hcd [ 3.089393] usb usb3: SerialNumber: 0000:00:14.0 [ 3.089675] hub 3-0:1.0: USB hub found [ 3.089808] hub 3-0:1.0: 8 ports detected [ 3.090979] usb usb4: New USB device found, idVendor=1d6b, idProduct=0003, bcdDevice= 6.01 [ 3.091134] usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 3.091278] usb usb4: Product: xHCI Host Controller [ 3.091430] usb usb4: Manufacturer: Linux 6.1.92+ xhci-hcd [ 3.091558] usb usb4: SerialNumber: 0000:00:14.0 [ 3.091799] hub 4-0:1.0: USB hub found [ 3.091932] hub 4-0:1.0: 6 ports detected [ 3.093059] usbcore: registered new interface driver usblp [ 3.093194] usbcore: registered new interface driver usb-storage [ 3.093338] i8042: PNP: No PS/2 controller found. [ 3.093676] rtc_cmos 00:00: RTC can wake from S4 [ 3.094320] rtc_cmos 00:00: registered as rtc0 [ 3.094476] rtc_cmos 00:00: alarms up to one month, y3k, 114 bytes nvram [ 3.094695] device-mapper: uevent: version 1.0.3 [ 3.094752] xen: registering gsi 18 triggering 0 polarity 1 [ 3.094816] Already setup the GSI :18 [ 3.094882] device-mapper: ioctl: 4.47.0-ioctl (2022-07-28) initialised: dm-devel@redhat.com [ 3.094961] i801_smbus 0000:00:1f.3: SPD Write Disable is set [ 3.095081] intel_pstate: CPU model not supported [ 3.095112] i801_smbus 0000:00:1f.3: SMBus using PCI interrupt [ 3.095212] hid: raw HID events driver (C) Jiri Kosina [ 3.095692] usbcore: registered new interface driver usbhid [ 3.095809] usbhid: USB HID core driver [ 3.095823] i2c i2c-0: 1/4 memory slots populated (from DMI) [ 3.096328] Initializing XFRM netlink socket [ 3.096548] NET: Registered PF_INET6 protocol family [ 3.097084] Segment Routing with IPv6 [ 3.097203] In-situ OAM (IOAM) with IPv6 [ 3.097343] sit: IPv6, IPv4 and MPLS over IPv4 tunneling driver [ 3.097599] NET: Registered PF_PACKET protocol family [ 3.097753] 9pnet: Installing 9P2000 support [ 3.097878] Key type dns_resolver registered [ 3.098650] IPI shorthand broadcast: enabled [ 3.098789] sched_clock: Marking stable (3061105976, 37506549)->(3942423789, -843811264) [ 3.099354] registered taskstats version 1 [ 3.099470] Loading compiled-in X.509 certificates [ 3.102025] PM: Magic number: 12:314:744 [ 3.102253] printk: console [netcon0] enabled [ 3.102369] netconsole: network logging started [ 3.102738] cfg80211: Loading compiled-in X.509 certificates for regulatory database [ 3.114866] cfg80211: Loaded X.509 cert 'sforshee: 00b28ddf47aef9cea7' [ 3.115212] cfg80211: Loaded X.509 cert 'wens: 61c038651aabdcf94bd0ac7ff06c7248db18c600' [ 3.115910] cfg80211: loaded regulatory.db is malformed or signature is missing/invalid [ 3.116089] ALSA device list: [ 3.123877] No soundcards found. [ 3.313648] usb 1-1: new high-speed USB device number 2 using ehci-pci [ 3.321678] usb 2-1: new high-speed USB device number 2 using ehci-pci [ 3.329574] usb 3-3: new high-speed USB device number 2 using xhci_hcd [ 3.366644] ata5: SATA link down (SStatus 0 SControl 300) [ 3.366840] ata1: SATA link down (SStatus 0 SControl 300) [ 3.366980] ata2: SATA link down (SStatus 0 SControl 300) [ 3.367137] ata4: SATA link down (SStatus 0 SControl 300) [ 3.367291] ata3: SATA link up 6.0 Gbps (SStatus 133 SControl 300) [ 3.367462] ata6: SATA link down (SStatus 0 SControl 300) [ 3.368532] ata3.00: ATA-10: HGST HUS722T1TALA604, RAGNWA05, max UDMA/133 [ 3.442067] usb 1-1: New USB device found, idVendor=8087, idProduct=8008, bcdDevice= 0.05 [ 3.442372] usb 1-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0 [ 3.442787] hub 1-1:1.0: USB hub found [ 3.443010] hub 1-1:1.0: 4 ports detected [ 3.449889] usb 2-1: New USB device found, idVendor=8087, idProduct=8000, bcdDevice= 0.05 [ 3.450041] usb 2-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0 [ 3.450434] hub 2-1:1.0: USB hub found [ 3.450641] hub 2-1:1.0: 4 ports detected [ 3.452959] ata3.00: 1953525168 sectors, multi 16: LBA48 NCQ (depth 32), AA [ 3.453090] ata3.00: Features: NCQ-sndrcv NCQ-prio [ 3.457154] usb 3-3: New USB device found, idVendor=05e3, idProduct=0610, bcdDevice=32.98 [ 3.457427] usb 3-3: New USB device strings: Mfr=0, Product=1, SerialNumber=0 [ 3.457635] usb 3-3: Product: USB2.0 Hub [ 3.458404] hub 3-3:1.0: USB hub found [ 3.458866] hub 3-3:1.0: 4 ports detected [ 3.480838] ata3.00: configured for UDMA/133 [ 3.481154] scsi 2:0:0:0: Direct-Access ATA HGST HUS722T1TAL WA05 PQ: 0 ANSI: 5 [ 3.482013] sd 2:0:0:0: Attached scsi generic sg0 type 0 [ 3.482052] sd 2:0:0:0: [sda] 1953525168 512-byte logical blocks: (1.00 TB/932 GiB) [ 3.482310] sd 2:0:0:0: [sda] Write Protect is off [ 3.482441] sd 2:0:0:0: [sda] Mode Sense: 00 3a 00 00 [ 3.482498] sd 2:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 3.482746] sd 2:0:0:0: [sda] Preferred minimum I/O size 512 bytes [ 3.502011] sda: sda1 sda2 < sda5 > [ 3.502379] sd 2:0:0:0: [sda] Attached SCSI disk [ 3.503640] Freeing unused kernel image (initmem) memory: 1580K [ 3.503769] Write protecting the kernel read-only data: 22528k [ 3.521904] Freeing unused kernel image (text/rodata gap) memory: 2032K [ 3.523171] Freeing unused kernel image (rodata/data gap) memory: 1568K [ 3.575551] usb 3-4: new high-speed USB device number 3 using xhci_hcd [ 3.701817] usb 3-4: New USB device found, idVendor=0557, idProduct=7000, bcdDevice= 0.00 [ 3.701971] usb 3-4: New USB device strings: Mfr=0, Product=0, SerialNumber=0 [ 3.702663] hub 3-4:1.0: USB hub found [ 3.702879] hub 3-4:1.0: 4 ports detected [ 3.765551] usb 3-3.2: new high-speed USB device number 4 using xhci_hcd [ 3.842896] usb 3-3.2: New USB device found, idVendor=05e3, idProduct=0610, bcdDevice=32.98 [ 3.843052] usb 3-3.2: New USB device strings: Mfr=0, Product=1, SerialNumber=0 [ 3.843196] usb 3-3.2: Product: USB2.0 Hub [ 3.843850] hub 3-3.2:1.0: USB hub found [ 3.844278] hub 3-3.2:1.0: 4 ports detected [ 3.986151] x86/mm: Checked W+X mappings: passed, no W+X pages found. [ 3.986278] Run /init as init process [ 3.986389] with arguments: [ 3.986390] /init [ 3.986391] placeholder [ 3.986392] with environment: [ 3.986393] HOME=/ [ 3.986394] TERM=linux [ 3.997588] usb 3-4.1: new low-speed USB device number 5 using xhci_hcd [ 4.103022] usb 3-4.1: New USB device found, idVendor=0557, idProduct=2419, bcdDevice= 1.00 [ 4.103185] usb 3-4.1: New USB device strings: Mfr=0, Product=0, SerialNumber=0 [ 4.109040] input: HID 0557:2419 as /devices/pci0000:00/0000:00:14.0/usb3/3-4/3-4.1/3-4.1:1.0/0003:0557:2419.0001/input/input2 [ 4.160804] hid-generic 0003:0557:2419.0001: input,hidraw0: USB HID v1.00 Keyboard [HID 0557:2419] on usb-0000:00:14.0-4.1/input0 [ 4.163753] input: HID 0557:2419 as /devices/pci0000:00/0000:00:14.0/usb3/3-4/3-4.1/3-4.1:1.1/0003:0557:2419.0002/input/input3 [ 4.164047] hid-generic 0003:0557:2419.0002: input,hidraw1: USB HID v1.00 Mouse [HID 0557:2419] on usb-0000:00:14.0-4.1/input1 [ 4.424278] ixgbe: Intel(R) 10 Gigabit PCI Express Network Driver [ 4.424442] ixgbe: Copyright (c) 1999-2016 Intel Corporation. [ 4.425121] ACPI Warning: \_SB.PCI0.BR2C._PRT: Return Package has no elements (empty) (20220331/nsprepkg-94) [ 4.425413] xen: registering gsi 16 triggering 0 polarity 1 [ 4.425428] Already setup the GSI :16 [ 4.428798] igb: Intel(R) Gigabit Ethernet Network Driver [ 4.428922] igb: Copyright (c) 2007-2014 Intel Corporation. [ 4.429122] xen: registering gsi 16 triggering 0 polarity 1 [ 4.429131] Already setup the GSI :16 [ 4.456598] pps pps0: new PPS source ptp0 [ 4.456785] igb 0000:07:00.0: added PHC on eth0 [ 4.456919] igb 0000:07:00.0: Intel(R) Gigabit Ethernet Network Connection [ 4.457040] igb 0000:07:00.0: eth0: (PCIe:2.5Gb/s:Width x1) 0c:c4:7a:9f:87:be [ 4.457205] igb 0000:07:00.0: eth0: PBA No: 010C00-000 [ 4.457328] igb 0000:07:00.0: Using MSI-X interrupts. 4 rx queue(s), 4 tx queue(s) [ 4.457580] xen: registering gsi 17 triggering 0 polarity 1 [ 4.457589] Already setup the GSI :17 [ 4.487106] pps pps1: new PPS source ptp1 [ 4.487287] igb 0000:08:00.0: added PHC on eth1 [ 4.487420] igb 0000:08:00.0: Intel(R) Gigabit Ethernet Network Connection [ 4.487556] igb 0000:08:00.0: eth1: (PCIe:2.5Gb/s:Width x1) 0c:c4:7a:9f:87:bf [ 4.487738] igb 0000:08:00.0: eth1: PBA No: 010000-000 [ 4.487865] igb 0000:08:00.0: Using MSI-X interrupts. 4 rx queue(s), 4 tx queue(s) [ 4.488102] xen: registering gsi 16 triggering 0 polarity 1 [ 4.488110] Already setup the GSI :16 [ 4.545615] igb 0000:0b:00.0: added PHC on eth2 [ 4.545755] igb 0000:0b:00.0: Intel(R) Gigabit Ethernet Network Connection [ 4.545876] igb 0000:0b:00.0: eth2: (PCIe:5.0Gb/s:Width x4) 0c:c4:7a:9f:87:c0 [ 4.546111] igb 0000:0b:00.0: eth2: PBA No: 010000-000 [ 4.546226] igb 0000:0b:00.0: Using MSI-X interrupts. 8 rx queue(s), 8 tx queue(s) [ 4.546453] xen: registering gsi 17 triggering 0 polarity 1 [ 4.546462] Already setup the GSI :17 [ 4.604526] igb 0000:0b:00.1: added PHC on eth3 [ 4.604662] igb 0000:0b:00.1: Intel(R) Gigabit Ethernet Network Connection [ 4.604800] igb 0000:0b:00.1: eth3: (PCIe:5.0Gb/s:Width x4) 0c:c4:7a:9f:87:c1 [ 4.605018] igb 0000:0b:00.1: eth3: PBA No: 010000-000 [ 4.605146] igb 0000:0b:00.1: Using MSI-X interrupts. 8 rx queue(s), 8 tx queue(s) [ 4.605380] xen: registering gsi 18 triggering 0 polarity 1 [ 4.605387] Already setup the GSI :18 [ 4.663155] igb 0000:0b:00.2: added PHC on eth4 [ 4.663296] igb 0000:0b:00.2: Intel(R) Gigabit Ethernet Network Connection [ 4.663417] igb 0000:0b:00.2: eth4: (PCIe:5.0Gb/s:Width x4) 0c:c4:7a:9f:87:c2 [ 4.663643] igb 0000:0b:00.2: eth4: PBA No: 010000-000 [ 4.663760] igb 0000:0b:00.2: Using MSI-X interrupts. 8 rx queue(s), 8 tx queue(s) [ 4.664022] xen: registering gsi 19 triggering 0 polarity 1 [ 4.664031] Already setup the GSI :19 [ 4.721145] igb 0000:0b:00.3: added PHC on eth5 [ 4.721286] igb 0000:0b:00.3: Intel(R) Gigabit Ethernet Network Connection [ 4.721407] igb 0000:0b:00.3: eth5: (PCIe:5.0Gb/s:Width x4) 0c:c4:7a:9f:87:c3 [ 4.721626] igb 0000:0b:00.3: eth5: PBA No: 010000-000 [ 4.721742] igb 0000:0b:00.3: Using MSI-X interrupts. 8 rx queue(s), 8 tx queue(s) [ 4.724049] igb 0000:07:00.0 enx0cc47a9f87be: renamed from eth0 [ 4.734107] igb 0000:08:00.0 enx0cc47a9f87bf: renamed from eth1 [ 4.748787] igb 0000:0b:00.0 enx0cc47a9f87c0: renamed from eth2 [ 4.755749] igb 0000:0b:00.1 enx0cc47a9f87c1: renamed from eth3 [ 4.763862] igb 0000:0b:00.2 enx0cc47a9f87c2: renamed from eth4 [ 4.782236] igb 0000:0b:00.3 enx0cc47a9f87c3: renamed from eth5 [ 5.162476] ixgbe 0000:04:00.0: Multiqueue Enabled: Rx Queue count = 8, Tx Queue count = 8 XDP Queue count = 0 [ 5.291980] ixgbe 0000:04:00.0: MAC: 5, PHY: 0, PBA No: 020B00-000 [ 5.292167] ixgbe 0000:04:00.0: 0c:c4:7a:9f:8f:b6 [ 5.581525] ixgbe 0000:04:00.0: Intel(R) 10 Gigabit Network Connection [ 5.581847] ACPI Warning: \_SB.PCI0.BR2C._PRT: Return Package has no elements (empty) (20220331/nsprepkg-94) [ 5.582066] xen: registering gsi 17 triggering 0 polarity 1 [ 5.582079] Already setup the GSI :17 [ 6.322609] ixgbe 0000:04:00.1: Multiqueue Enabled: Rx Queue count = 8, Tx Queue count = 8 XDP Queue count = 0 [ 6.452438] ixgbe 0000:04:00.1: MAC: 5, PHY: 0, PBA No: 020B00-000 [ 6.452617] ixgbe 0000:04:00.1: 0c:c4:7a:9f:8f:b7 [ 6.741384] ixgbe 0000:04:00.1: Intel(R) 10 Gigabit Network Connection [ 6.743829] ixgbe 0000:04:00.1 enx0cc47a9f8fb7: renamed from eth1 [ 6.751950] ixgbe 0000:04:00.0 enx0cc47a9f8fb6: renamed from eth0 [ 7.162496] EXT4-fs (dm-0): mounting ext3 file system using the ext4 subsystem [ 7.169857] EXT4-fs (dm-0): mounted filesystem with ordered data mode. Quota mode: none. [ 10.682638] EXT4-fs (dm-0): re-mounted. Quota mode: none. [ 11.905914] EXT4-fs (sda1): mounting ext3 file system using the ext4 subsystem [ 11.930715] EXT4-fs (sda1): mounted filesystem with ordered data mode. Quota mode: none. [ 12.025693] Adding 1949692k swap on /dev/mapper/debina0--vg-swap_1. Priority:-2 extents:1 across:1949692k [ 13.560746] xenbr0: port 1(enx0cc47a9f87be) entered blocking state [ 13.560921] xenbr0: port 1(enx0cc47a9f87be) entered disabled state [ 13.561097] device enx0cc47a9f87be entered promiscuous mode [ 17.089173] igb 0000:07:00.0 enx0cc47a9f87be: igb: enx0cc47a9f87be NIC Link is Up 1000 Mbps Full Duplex, Flow Control: RX [ 17.191820] IPv6: ADDRCONF(NETDEV_CHANGE): enx0cc47a9f87be: link becomes ready [ 17.192058] xenbr0: port 1(enx0cc47a9f87be) entered blocking state [ 17.192182] xenbr0: port 1(enx0cc47a9f87be) entered forwarding state [ 17.192454] IPv6: ADDRCONF(NETDEV_CHANGE): xenbr0: link becomes ready