[ 0.000000] Linux version 6.1.92+ (osstest@himrod1) (gcc (Debian 12.2.0-14) 12.2.0, GNU ld (GNU Binutils for Debian) 2.40) #1 SMP PREEMPT_DYNAMIC Wed Jun 12 01:47:34 UTC 2024 [ 0.000000] Command line: placeholder root=/dev/mapper/fiano0--vg-root ro console=hvc0 [ 0.000000] Released 0 page(s) [ 0.000000] BIOS-provided physical RAM map: [ 0.000000] Xen: [mem 0x0000000000000000-0x0000000000099fff] usable [ 0.000000] Xen: [mem 0x000000000009ac00-0x00000000000fffff] reserved [ 0.000000] Xen: [mem 0x0000000000100000-0x0000000020065fff] usable [ 0.000000] Xen: [mem 0x000000007de2c000-0x000000007debafff] reserved [ 0.000000] Xen: [mem 0x000000007debb000-0x000000007dfc3fff] ACPI data [ 0.000000] Xen: [mem 0x000000007dfc4000-0x000000007e1e0fff] ACPI NVS [ 0.000000] Xen: [mem 0x000000007e1e1000-0x000000007f36afff] reserved [ 0.000000] Xen: [mem 0x000000007f36b000-0x000000007f7fffff] ACPI NVS [ 0.000000] Xen: [mem 0x0000000080000000-0x000000008fffffff] reserved [ 0.000000] Xen: [mem 0x00000000fbffc000-0x00000000fbffcfff] reserved [ 0.000000] Xen: [mem 0x00000000fec00000-0x00000000fec01fff] reserved [ 0.000000] Xen: [mem 0x00000000fed1c000-0x00000000fed3ffff] reserved [ 0.000000] Xen: [mem 0x00000000fee00000-0x00000000feefffff] reserved [ 0.000000] Xen: [mem 0x00000000ff000000-0x00000000ffffffff] reserved [ 0.000000] NX (Execute Disable) protection: active [ 0.000000] SMBIOS 2.7 present. [ 0.000000] DMI: Supermicro X9DBL-3F/X9DBL-iF/X9DBL-3F/X9DBL-iF, BIOS 3.00 12/06/2013 [ 0.000000] Hypervisor detected: Xen PV [ 0.000505] tsc: Detected 1799.999 MHz processor [ 0.001239] e820: update [mem 0x00000000-0x00000fff] usable ==> reserved [ 0.001250] e820: remove [mem 0x000a0000-0x000fffff] usable [ 0.001262] last_pfn = 0x20066 max_arch_pfn = 0x400000000 [ 0.001265] Disabled [ 0.001267] x86/PAT: MTRRs disabled, skipping PAT initialization too. [ 0.001279] x86/PAT: Configuration [0-7]: WB WT UC- UC WC WP UC UC [ 0.001376] Kernel/User page tables isolation: disabled on XEN PV. [ 0.039602] RAMDISK: [mem 0x04000000-0x0536afff] [ 0.039631] ACPI: Early table checksum verification disabled [ 0.046208] ACPI: RSDP 0x00000000000F04A0 000024 (v02 SUPERM) [ 0.046238] ACPI: XSDT 0x000000007DEF1088 00008C (v01 SUPERM SMCI--MB 00000001 AMI 00010013) [ 0.046301] ACPI: FACP 0x000000007DEFBAB0 0000F4 (v04 SUPERM SMCI--MB 00000001 AMI 00010013) [ 0.046380] ACPI: DSDT 0x000000007DEF11A0 00A910 (v02 SUPERM SMCI--MB 00000000 INTL 20091112) [ 0.046407] ACPI: FACS 0x000000007E1D8080 000040 [ 0.046434] ACPI: APIC 0x000000007DEFBBA8 000090 (v03 00000001 AMI 00010013) [ 0.046461] ACPI: FPDT 0x000000007DEFBC38 000044 (v01 00000001 AMI 00010013) [ 0.046488] ACPI: HPET 0x000000007DEFBC80 000038 (v01 SUPERM SMCI--MB 00000001 AMI. 00000005) [ 0.046515] ACPI: PRAD 0x000000007DEFBCB8 0000BE (v02 PRADID PRADTID 00000001 MSFT 04000000) [ 0.046544] ACPI: SPMI 0x000000007DEFBD78 000040 (v05 A M I OEMSPMI 00000000 AMI. 00000000) [ 0.046570] ACPI: SSDT 0x000000007DEFBDB8 0C7AE8 (v02 INTEL CpuPm 00004000 INTL 20091112) [ 0.046597] ACPI: EINJ 0x000000007DFC38A0 000130 (v01 AMI AMI EINJ 00000000 00000000) [ 0.046624] ACPI: ERST 0x000000007DFC39D0 000230 (v01 AMIER AMI ERST 00000000 00000000) [ 0.046651] ACPI: HEST 0x000000007DFC3C00 0000A8 (v01 AMI AMI HEST 00000000 00000000) [ 0.046678] ACPI: BERT 0x000000007DFC3CA8 000030 (v01 AMI AMI BERT 00000000 00000000) [ 0.046705] ACPI: RMAD 0x000000007DFC3CD8 0000B4 (v01 A M I OEMDMAR 00000001 INTL 00000001) [ 0.046732] ACPI: MCFG 0x000000007DFC3D90 00003C (v01 SUPERM SMCI--MB 00000001 MSFT 00000097) [ 0.046746] ACPI: Reserving FACP table memory at [mem 0x7defbab0-0x7defbba3] [ 0.046750] ACPI: Reserving DSDT table memory at [mem 0x7def11a0-0x7defbaaf] [ 0.046752] ACPI: Reserving FACS table memory at [mem 0x7e1d8080-0x7e1d80bf] [ 0.046753] ACPI: Reserving APIC table memory at [mem 0x7defbba8-0x7defbc37] [ 0.046755] ACPI: Reserving FPDT table memory at [mem 0x7defbc38-0x7defbc7b] [ 0.046756] ACPI: Reserving HPET table memory at [mem 0x7defbc80-0x7defbcb7] [ 0.046757] ACPI: Reserving PRAD table memory at [mem 0x7defbcb8-0x7defbd75] [ 0.046759] ACPI: Reserving SPMI table memory at [mem 0x7defbd78-0x7defbdb7] [ 0.046760] ACPI: Reserving SSDT table memory at [mem 0x7defbdb8-0x7dfc389f] [ 0.046761] ACPI: Reserving EINJ table memory at [mem 0x7dfc38a0-0x7dfc39cf] [ 0.046763] ACPI: Reserving ERST table memory at [mem 0x7dfc39d0-0x7dfc3bff] [ 0.046764] ACPI: Reserving HEST table memory at [mem 0x7dfc3c00-0x7dfc3ca7] [ 0.046765] ACPI: Reserving BERT table memory at [mem 0x7dfc3ca8-0x7dfc3cd7] [ 0.046766] ACPI: Reserving RMAD table memory at [mem 0x7dfc3cd8-0x7dfc3d8b] [ 0.046768] ACPI: Reserving MCFG table memory at [mem 0x7dfc3d90-0x7dfc3dcb] [ 0.046870] Setting APIC routing to Xen PV. [ 0.054798] Zone ranges: [ 0.054811] DMA [mem 0x0000000000001000-0x0000000000ffffff] [ 0.054819] DMA32 [mem 0x0000000001000000-0x0000000020065fff] [ 0.054822] Normal empty [ 0.054823] Movable zone start for each node [ 0.054824] Early memory node ranges [ 0.054825] node 0: [mem 0x0000000000001000-0x0000000000099fff] [ 0.054828] node 0: [mem 0x0000000000100000-0x0000000020065fff] [ 0.054832] Initmem setup node 0 [mem 0x0000000000001000-0x0000000020065fff] [ 0.054847] On node 0, zone DMA: 1 pages in unavailable ranges [ 0.054963] On node 0, zone DMA: 102 pages in unavailable ranges [ 0.059465] On node 0, zone DMA32: 32666 pages in unavailable ranges [ 0.059484] p2m virtual area at (____ptrval____), size is 40000000 [ 0.375493] Remapped 102 page(s) [ 0.378210] ACPI: PM-Timer IO Port: 0x408 [ 0.378311] ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1]) [ 0.378316] ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1]) [ 0.378318] ACPI: LAPIC_NMI (acpi_id[0x02] high edge lint[0x1]) [ 0.378320] ACPI: LAPIC_NMI (acpi_id[0x03] high edge lint[0x1]) [ 0.378368] IOAPIC[0]: apic_id 0, version 32, address 0xfec00000, GSI 0-23 [ 0.378391] IOAPIC[1]: apic_id 2, version 32, address 0xfec01000, GSI 24-47 [ 0.378411] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl) [ 0.378418] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level) [ 0.378460] ACPI: Using ACPI (MADT) for SMP configuration information [ 0.378470] ACPI: HPET id: 0x8086a701 base: 0xfed00000 [ 0.378590] smpboot: Allowing 4 CPUs, 0 hotplug CPUs [ 0.378617] PM: hibernation: Registered nosave memory: [mem 0x00000000-0x00000fff] [ 0.378620] PM: hibernation: Registered nosave memory: [mem 0x0009a000-0x0009afff] [ 0.378621] PM: hibernation: Registered nosave memory: [mem 0x0009b000-0x000fffff] [ 0.378625] [mem 0x90000000-0xfbffbfff] available for PCI devices [ 0.378633] Booting kernel on Xen [ 0.378635] Xen version: 4.19-unstable (preserve-AD) [ 0.378641] clocksource: refined-jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 1910969940391419 ns [ 0.386877] setup_percpu: NR_CPUS:64 nr_cpumask_bits:4 nr_cpu_ids:4 nr_node_ids:1 [ 0.387476] percpu: Embedded 54 pages/cpu s180520 r8192 d32472 u524288 [ 0.387486] pcpu-alloc: s180520 r8192 d32472 u524288 alloc=1*2097152 [ 0.387491] pcpu-alloc: [0] 0 1 2 3 [ 0.387639] xen: PV spinlocks enabled [ 0.387644] PV qspinlock hash table entries: 256 (order: 0, 4096 bytes, linear) [ 0.387655] Built 1 zonelists, mobility grouping on. Total pages: 129006 [ 0.387659] Kernel command line: placeholder root=/dev/mapper/fiano0--vg-root ro console=hvc0 [ 0.387736] Unknown kernel command line parameters "placeholder", will be passed to user space. [ 0.387757] random: crng init done [ 0.387876] Dentry cache hash table entries: 65536 (order: 7, 524288 bytes, linear) [ 0.387936] Inode-cache hash table entries: 32768 (order: 6, 262144 bytes, linear) [ 0.389171] mem auto-init: stack:all(zero), heap alloc:off, heap free:off [ 0.389185] software IO TLB: area num 4. [ 0.492848] Memory: 390896K/524284K available (14349K kernel code, 2682K rwdata, 4576K rodata, 1580K init, 1296K bss, 133136K reserved, 0K cma-reserved) [ 0.493142] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1 [ 0.496618] Dynamic Preempt: voluntary [ 0.496759] rcu: Preemptible hierarchical RCU implementation. [ 0.496761] rcu: RCU event tracing is enabled. [ 0.496761] rcu: RCU restricting CPUs from NR_CPUS=64 to nr_cpu_ids=4. [ 0.496764] Trampoline variant of Tasks RCU enabled. [ 0.496765] rcu: RCU calculated value of scheduler-enlistment delay is 100 jiffies. [ 0.496766] rcu: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=4 [ 0.515197] NR_IRQS: 4352, nr_irqs: 864, preallocated irqs: 16 [ 0.515395] xen:events: Using FIFO-based ABI [ 0.515433] xen: --> pirq=1 -> irq=1 (gsi=1) [ 0.515449] xen: --> pirq=2 -> irq=2 (gsi=2) [ 0.515466] xen: --> pirq=3 -> irq=3 (gsi=3) [ 0.515480] xen: --> pirq=4 -> irq=4 (gsi=4) [ 0.515493] xen: --> pirq=5 -> irq=5 (gsi=5) [ 0.515507] xen: --> pirq=6 -> irq=6 (gsi=6) [ 0.515520] xen: --> pirq=7 -> irq=7 (gsi=7) [ 0.515534] xen: --> pirq=8 -> irq=8 (gsi=8) [ 0.515547] xen: --> pirq=9 -> irq=9 (gsi=9) [ 0.515561] xen: --> pirq=10 -> irq=10 (gsi=10) [ 0.515575] xen: --> pirq=11 -> irq=11 (gsi=11) [ 0.515589] xen: --> pirq=12 -> irq=12 (gsi=12) [ 0.515602] xen: --> pirq=13 -> irq=13 (gsi=13) [ 0.515616] xen: --> pirq=14 -> irq=14 (gsi=14) [ 0.515629] xen: --> pirq=15 -> irq=15 (gsi=15) [ 0.515647] rcu: srcu_init: Setting srcu_struct sizes based on contention. [ 0.520586] Console: colour VGA+ 80x25 [ 0.535670] printk: console [tty0] enabled [ 0.537497] printk: console [hvc0] enabled [ 0.537640] ACPI: Core revision 20220331 [ 0.620722] clocksource: xen: mask: 0xffffffffffffffff max_cycles: 0x1cd42e4dffb, max_idle_ns: 881590591483 ns [ 0.620905] Xen: using vcpuop timer interface [ 0.620913] installing Xen timer for CPU 0 [ 0.621099] clocksource: tsc-early: mask: 0xffffffffffffffff max_cycles: 0x19f228ab7a2, max_idle_ns: 440795289252 ns [ 0.621281] Calibrating delay loop (skipped), value calculated using timer frequency.. 3599.99 BogoMIPS (lpj=1799999) [ 0.621720] Last level iTLB entries: 4KB 512, 2MB 8, 4MB 8 [ 0.621861] Last level dTLB entries: 4KB 512, 2MB 0, 4MB 0, 1GB 4 [ 0.622027] Spectre V1 : Mitigation: usercopy/swapgs barriers and __user pointer sanitization [ 0.622291] Spectre V2 : Mitigation: Retpolines [ 0.622431] Spectre V2 : Spectre v2 / SpectreRSB mitigation: Filling RSB on context switch [ 0.622595] Spectre V2 : Spectre v2 / SpectreRSB : Filling RSB on VMEXIT [ 0.622735] Spectre V2 : Enabling Restricted Speculation for firmware calls [ 0.622877] Spectre V2 : mitigation: Enabling conditional Indirect Branch Prediction Barrier [ 0.623044] Spectre V2 : User space: Mitigation: STIBP via prctl [ 0.623183] Speculative Store Bypass: Mitigation: Speculative Store Bypass disabled via prctl [ 0.623289] MDS: Mitigation: Clear CPU buffers [ 0.623424] MMIO Stale Data: Unknown: No mitigations [ 0.623590] x86/fpu: Supporting XSAVE feature 0x001: 'x87 floating point registers' [ 0.623755] x86/fpu: Supporting XSAVE feature 0x002: 'SSE registers' [ 0.623895] x86/fpu: Supporting XSAVE feature 0x004: 'AVX registers' [ 0.624035] x86/fpu: xstate_offset[2]: 576, xstate_sizes[2]: 256 [ 0.624175] x86/fpu: Enabled xstate features 0x7, context size is 832 bytes, using 'standard' format. [ 0.647603] Freeing SMP alternatives memory: 40K [ 0.647751] pid_max: default: 32768 minimum: 301 [ 0.647911] LSM: Security Framework initializing [ 0.648055] SELinux: Initializing. [ 0.648221] Mount-cache hash table entries: 1024 (order: 1, 8192 bytes, linear) [ 0.648288] Mountpoint-cache hash table entries: 1024 (order: 1, 8192 bytes, linear) [ 0.649079] cpu 0 spinlock event irq 49 [ 0.649252] VPMU disabled by hypervisor. [ 0.649917] cblist_init_generic: Setting adjustable number of callback queues. [ 0.650085] cblist_init_generic: Setting shift to 2 and lim to 1. [ 0.650301] Performance Events: unsupported p6 CPU model 62 no PMU driver, software events only. [ 0.650481] signal: max sigframe size: 1776 [ 0.650711] rcu: Hierarchical SRCU implementation. [ 0.650848] rcu: Max phase no-delay instances is 400. [ 0.651522] smp: Bringing up secondary CPUs ... [ 0.652071] installing Xen timer for CPU 1 [ 0.652869] cpu 1 spinlock event irq 59 [ 0.653537] MDS CPU bug present and SMT on, data leak possible. See https://www.kernel.org/doc/html/latest/admin-guide/hw-vuln/mds.html for more details. [ 0.654884] installing Xen timer for CPU 2 [ 0.655551] cpu 2 spinlock event irq 65 [ 0.655683] installing Xen timer for CPU 3 [ 0.656855] cpu 3 spinlock event irq 71 [ 0.657287] smp: Brought up 1 node, 4 CPUs [ 0.657426] smpboot: Max logical packages: 1 [ 0.657687] devtmpfs: initialized [ 0.657687] x86/mm: Memory block size: 128MB [ 0.658546] ACPI: PM: Registering ACPI NVS region [mem 0x7dfc4000-0x7e1e0fff] (2215936 bytes) [ 0.658546] ACPI: PM: Registering ACPI NVS region [mem 0x7f36b000-0x7f7fffff] (4804608 bytes) [ 0.658816] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 1911260446275000 ns [ 0.659302] futex hash table entries: 1024 (order: 4, 65536 bytes, linear) [ 0.659618] PM: RTC time: 03:28:47, date: 2024-06-12 [ 0.659884] NET: Registered PF_NETLINK/PF_ROUTE protocol family [ 0.660078] xen:grant_table: Grant tables using version 1 layout [ 0.660248] Grant table initialized [ 0.660465] audit: initializing netlink subsys (disabled) [ 0.660636] audit: type=2000 audit(1718162928.359:1): state=initialized audit_enabled=0 res=1 [ 0.660636] thermal_sys: Registered thermal governor 'step_wise' [ 0.660636] thermal_sys: Registered thermal governor 'user_space' [ 0.661308] ACPI FADT declares the system doesn't support PCIe ASPM, so disable it [ 0.661825] PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0x80000000-0x8fffffff] (base 0x80000000) [ 0.662002] PCI: MMCONFIG at [mem 0x80000000-0x8fffffff] reserved in E820 [ 0.898032] PCI: Using configuration type 1 for base access [ 0.901469] kprobes: kprobe jump-optimization is enabled. All kprobes are optimized if possible. [ 0.902379] ACPI: Added _OSI(Module Device) [ 0.902492] ACPI: Added _OSI(Processor Device) [ 0.902626] ACPI: Added _OSI(3.0 _SCP Extensions) [ 0.902626] ACPI: Added _OSI(Processor Aggregator Device) [ 1.081648] ACPI: 2 ACPI AML tables successfully acquired and loaded [ 1.096937] xen: registering gsi 9 triggering 0 polarity 0 [ 1.102563] ACPI: Interpreter enabled [ 1.102732] ACPI: PM: (supports S0 S1 S4 S5) [ 1.102868] ACPI: Using IOAPIC for interrupt routing [ 1.103056] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug [ 1.103227] PCI: Using E820 reservations for host bridge windows [ 1.103824] ACPI: Enabled 5 GPEs in block 00 to 3F [ 1.125537] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-fe]) [ 1.125695] acpi PNP0A08:00: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI HPX-Type3] [ 1.125998] acpi PNP0A08:00: _OSC: platform does not support [PME LTR] [ 1.126379] acpi PNP0A08:00: _OSC: OS now controls [PCIeCapability] [ 1.126523] acpi PNP0A08:00: FADT indicates ASPM is unsupported, using BIOS configuration [ 1.127011] PCI host bridge to bus 0000:00 [ 1.127149] pci_bus 0000:00: root bus resource [io 0x0000-0x03af window] [ 1.127288] pci_bus 0000:00: root bus resource [io 0x03e0-0x0cf7 window] [ 1.127431] pci_bus 0000:00: root bus resource [io 0x03b0-0x03df window] [ 1.127572] pci_bus 0000:00: root bus resource [io 0x0d00-0xffff window] [ 1.127714] pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000dffff window] [ 1.127879] pci_bus 0000:00: root bus resource [mem 0xfed08000-0xfed08fff window] [ 1.128042] pci_bus 0000:00: root bus resource [mem 0xfed0e000-0xfed0ffff window] [ 1.128207] pci_bus 0000:00: root bus resource [mem 0x80000000-0xfbffffff window] [ 1.128287] pci_bus 0000:00: root bus resource [bus 00-fe] [ 1.128525] pci 0000:00:00.0: [8086:0e00] type 00 class 0x060000 [ 1.129182] pci 0000:00:00.0: PME# supported from D0 D3hot D3cold [ 1.129606] pci 0000:00:01.0: [8086:0e02] type 01 class 0x060400 [ 1.130395] pci 0000:00:01.0: PME# supported from D0 D3hot D3cold [ 1.130919] pci 0000:00:01.1: [8086:0e03] type 01 class 0x060400 [ 1.131705] pci 0000:00:01.1: PME# supported from D0 D3hot D3cold [ 1.132271] pci 0000:00:03.0: [8086:0e08] type 01 class 0x060400 [ 1.132725] pci 0000:00:03.0: enabling Extended Tags [ 1.133228] pci 0000:00:03.0: PME# supported from D0 D3hot D3cold [ 1.133693] pci 0000:00:04.0: [8086:0e20] type 00 class 0x088000 [ 1.133966] pci 0000:00:04.0: reg 0x10: [mem 0xfbb1c000-0xfbb1ffff 64bit] [ 1.134919] pci 0000:00:04.1: [8086:0e21] type 00 class 0x088000 [ 1.135192] pci 0000:00:04.1: reg 0x10: [mem 0xfbb18000-0xfbb1bfff 64bit] [ 1.136091] pci 0000:00:04.2: [8086:0e22] type 00 class 0x088000 [ 1.136394] pci 0000:00:04.2: reg 0x10: [mem 0xfbb14000-0xfbb17fff 64bit] [ 1.137341] pci 0000:00:04.3: [8086:0e23] type 00 class 0x088000 [ 1.137618] pci 0000:00:04.3: reg 0x10: [mem 0xfbb10000-0xfbb13fff 64bit] [ 1.138567] pci 0000:00:04.4: [8086:0e24] type 00 class 0x088000 [ 1.138866] pci 0000:00:04.4: reg 0x10: [mem 0xfbb0c000-0xfbb0ffff 64bit] [ 1.139819] pci 0000:00:04.5: [8086:0e25] type 00 class 0x088000 [ 1.140099] pci 0000:00:04.5: reg 0x10: [mem 0xfbb08000-0xfbb0bfff 64bit] [ 1.141050] pci 0000:00:04.6: [8086:0e26] type 00 class 0x088000 [ 1.141326] pci 0000:00:04.6: reg 0x10: [mem 0xfbb04000-0xfbb07fff 64bit] [ 1.142268] pci 0000:00:04.7: [8086:0e27] type 00 class 0x088000 [ 1.142543] pci 0000:00:04.7: reg 0x10: [mem 0xfbb00000-0xfbb03fff 64bit] [ 1.143479] pci 0000:00:05.0: [8086:0e28] type 00 class 0x088000 [ 1.144334] pci 0000:00:05.2: [8086:0e2a] type 00 class 0x088000 [ 1.145183] pci 0000:00:05.4: [8086:0e2c] type 00 class 0x080020 [ 1.145380] pci 0000:00:05.4: reg 0x10: [mem 0xfbb25000-0xfbb25fff] [ 1.146420] pci 0000:00:11.0: [8086:1d3e] type 01 class 0x060400 [ 1.147217] pci 0000:00:11.0: PME# supported from D0 D3hot D3cold [ 1.147677] pci 0000:00:16.0: [8086:1d3a] type 00 class 0x078000 [ 1.147953] pci 0000:00:16.0: reg 0x10: [mem 0xfed0e000-0xfed0e00f 64bit] [ 1.148595] pci 0000:00:16.0: PME# supported from D0 D3hot D3cold [ 1.149018] pci 0000:00:16.1: [8086:1d3b] type 00 class 0x078000 [ 1.149295] pci 0000:00:16.1: reg 0x10: [mem 0xfed0f000-0xfed0f00f 64bit] [ 1.149942] pci 0000:00:16.1: PME# supported from D0 D3hot D3cold [ 1.150456] pci 0000:00:1a.0: [8086:1d2d] type 00 class 0x0c0320 [ 1.150702] pci 0000:00:1a.0: reg 0x10: [mem 0xfbb23000-0xfbb233ff] [ 1.151430] pci 0000:00:1a.0: PME# supported from D0 D3hot D3cold [ 1.151882] pci 0000:00:1c.0: [8086:1d10] type 01 class 0x060400 [ 1.152672] pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold [ 1.152943] pci 0000:00:1c.0: Enabling MPC IRBNCE [ 1.153088] pci 0000:00:1c.0: Intel PCH root port ACS workaround enabled [ 1.153469] pci 0000:00:1c.1: [8086:1d12] type 01 class 0x060400 [ 1.154252] pci 0000:00:1c.1: PME# supported from D0 D3hot D3cold [ 1.154412] pci 0000:00:1c.1: Enabling MPC IRBNCE [ 1.154558] pci 0000:00:1c.1: Intel PCH root port ACS workaround enabled [ 1.155018] pci 0000:00:1d.0: [8086:1d26] type 00 class 0x0c0320 [ 1.155278] pci 0000:00:1d.0: reg 0x10: [mem 0xfbb22000-0xfbb223ff] [ 1.156008] pci 0000:00:1d.0: PME# supported from D0 D3hot D3cold [ 1.156491] pci 0000:00:1e.0: [8086:244e] type 01 class 0x060401 [ 1.157297] pci 0000:00:1f.0: [8086:1d41] type 00 class 0x060100 [ 1.158349] pci 0000:00:1f.2: [8086:1d02] type 00 class 0x010601 [ 1.158592] pci 0000:00:1f.2: reg 0x10: [io 0xf050-0xf057] [ 1.158784] pci 0000:00:1f.2: reg 0x14: [io 0xf040-0xf043] [ 1.158975] pci 0000:00:1f.2: reg 0x18: [io 0xf030-0xf037] [ 1.159169] pci 0000:00:1f.2: reg 0x1c: [io 0xf020-0xf023] [ 1.159341] pci 0000:00:1f.2: reg 0x20: [io 0xf000-0xf01f] [ 1.159539] pci 0000:00:1f.2: reg 0x24: [mem 0xfbb21000-0xfbb217ff] [ 1.160011] pci 0000:00:1f.2: PME# supported from D3hot [ 1.160429] pci 0000:00:1f.3: [8086:1d22] type 00 class 0x0c0500 [ 1.160728] pci 0000:00:1f.3: reg 0x10: [mem 0xfbb20000-0xfbb200ff 64bit] [ 1.161030] pci 0000:00:1f.3: reg 0x20: [io 0x1180-0x119f] [ 1.161517] pci 0000:00:1f.6: [8086:1d24] type 00 class 0x118000 [ 1.161794] pci 0000:00:1f.6: reg 0x10: [mem 0xfed08000-0xfed08fff 64bit] [ 1.162773] pci 0000:00:01.0: PCI bridge to [bus 01] [ 1.163207] pci 0000:00:01.1: PCI bridge to [bus 02] [ 1.163583] pci 0000:00:03.0: PCI bridge to [bus 03] [ 1.164093] pci 0000:04:00.0: [8086:1d6b] type 00 class 0x010700 [ 1.164376] pci 0000:04:00.0: reg 0x10: [mem 0xfa47c000-0xfa47ffff 64bit pref] [ 1.164633] pci 0000:04:00.0: reg 0x18: [mem 0xfa000000-0xfa3fffff 64bit pref] [ 1.164852] pci 0000:04:00.0: reg 0x20: [io 0xe000-0xe0ff] [ 1.165150] pci 0000:04:00.0: enabling Extended Tags [ 1.165742] pci 0000:04:00.0: reg 0x164: [mem 0xfa400000-0xfa403fff 64bit pref] [ 1.165913] pci 0000:04:00.0: VF(n) BAR0 space: [mem 0xfa400000-0xfa47bfff 64bit pref] (contains BAR0 for 31 VFs) [ 1.166788] pci 0000:00:11.0: PCI bridge to [bus 04] [ 1.166943] pci 0000:00:11.0: bridge window [io 0xe000-0xefff] [ 1.167131] pci 0000:00:11.0: bridge window [mem 0xfa000000-0xfa4fffff 64bit pref] [ 1.167625] pci 0000:05:00.0: [8086:10d3] type 00 class 0x020000 [ 1.167889] pci 0000:05:00.0: reg 0x10: [mem 0xfba00000-0xfba1ffff] [ 1.168160] pci 0000:05:00.0: reg 0x18: [io 0xd000-0xd01f] [ 1.168354] pci 0000:05:00.0: reg 0x1c: [mem 0xfba20000-0xfba23fff] [ 1.169089] pci 0000:05:00.0: PME# supported from D0 D3hot D3cold [ 1.169740] pci 0000:00:1c.0: PCI bridge to [bus 05] [ 1.169895] pci 0000:00:1c.0: bridge window [io 0xd000-0xdfff] [ 1.170055] pci 0000:00:1c.0: bridge window [mem 0xfba00000-0xfbafffff] [ 1.170565] pci 0000:06:00.0: [8086:10d3] type 00 class 0x020000 [ 1.170829] pci 0000:06:00.0: reg 0x10: [mem 0xfb900000-0xfb91ffff] [ 1.171100] pci 0000:06:00.0: reg 0x18: [io 0xc000-0xc01f] [ 1.171307] pci 0000:06:00.0: reg 0x1c: [mem 0xfb920000-0xfb923fff] [ 1.172047] pci 0000:06:00.0: PME# supported from D0 D3hot D3cold [ 1.172693] pci 0000:00:1c.1: PCI bridge to [bus 06] [ 1.172848] pci 0000:00:1c.1: bridge window [io 0xc000-0xcfff] [ 1.173004] pci 0000:00:1c.1: bridge window [mem 0xfb900000-0xfb9fffff] [ 1.173311] pci_bus 0000:07: extended config space not accessible [ 1.173529] pci 0000:07:01.0: [102b:0532] type 00 class 0x030000 [ 1.173773] pci 0000:07:01.0: reg 0x10: [mem 0xf9000000-0xf9ffffff pref] [ 1.173970] pci 0000:07:01.0: reg 0x14: [mem 0xfb800000-0xfb803fff] [ 1.174172] pci 0000:07:01.0: reg 0x18: [mem 0xfb000000-0xfb7fffff] [ 1.174564] pci 0000:07:01.0: Video device with shadowed ROM at [mem 0x000c0000-0x000dffff] [ 1.175253] pci 0000:00:1e.0: PCI bridge to [bus 07] (subtractive decode) [ 1.175320] pci 0000:00:1e.0: bridge window [mem 0xfb000000-0xfb8fffff] [ 1.175493] pci 0000:00:1e.0: bridge window [mem 0xf9000000-0xf9ffffff 64bit pref] [ 1.175657] pci 0000:00:1e.0: bridge window [io 0x0000-0x03af window] (subtractive decode) [ 1.176287] pci 0000:00:1e.0: bridge window [io 0x03e0-0x0cf7 window] (subtractive decode) [ 1.176456] pci 0000:00:1e.0: bridge window [io 0x03b0-0x03df window] (subtractive decode) [ 1.176624] pci 0000:00:1e.0: bridge window [io 0x0d00-0xffff window] (subtractive decode) [ 1.176791] pci 0000:00:1e.0: bridge window [mem 0x000a0000-0x000dffff window] (subtractive decode) [ 1.176961] pci 0000:00:1e.0: bridge window [mem 0xfed08000-0xfed08fff window] (subtractive decode) [ 1.177130] pci 0000:00:1e.0: bridge window [mem 0xfed0e000-0xfed0ffff window] (subtractive decode) [ 1.177287] pci 0000:00:1e.0: bridge window [mem 0x80000000-0xfbffffff window] (subtractive decode) [ 1.177781] pci_bus 0000:00: on NUMA node 0 [ 1.177929] xen: registering gsi 13 triggering 1 polarity 0 [ 1.178701] ACPI: PCI Root Bridge [UNC0] (domain 0000 [bus ff]) [ 1.178853] acpi PNP0A03:00: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI HPX-Type3] [ 1.179043] acpi PNP0A03:00: _OSC: OS now controls [PME PCIeCapability LTR] [ 1.179186] acpi PNP0A03:00: FADT indicates ASPM is unsupported, using BIOS configuration [ 1.179367] PCI host bridge to bus 0000:ff [ 1.179505] pci_bus 0000:ff: root bus resource [bus ff] [ 1.179748] pci 0000:ff:08.0: [8086:0e80] type 00 class 0x088000 [ 1.180421] pci 0000:ff:09.0: [8086:0e90] type 00 class 0x088000 [ 1.181077] pci 0000:ff:0a.0: [8086:0ec0] type 00 class 0x088000 [ 1.181680] pci 0000:ff:0a.1: [8086:0ec1] type 00 class 0x088000 [ 1.182276] pci 0000:ff:0a.2: [8086:0ec2] type 00 class 0x088000 [ 1.182877] pci 0000:ff:0a.3: [8086:0ec3] type 00 class 0x088000 [ 1.183509] pci 0000:ff:0b.0: [8086:0e1e] type 00 class 0x088000 [ 1.184126] pci 0000:ff:0b.3: [8086:0e1f] type 00 class 0x088000 [ 1.184755] pci 0000:ff:0c.0: [8086:0ee0] type 00 class 0x088000 [ 1.185381] pci 0000:ff:0c.1: [8086:0ee2] type 00 class 0x088000 [ 1.186019] pci 0000:ff:0d.0: [8086:0ee1] type 00 class 0x088000 [ 1.186621] pci 0000:ff:0d.1: [8086:0ee3] type 00 class 0x088000 [ 1.187262] pci 0000:ff:0e.0: [8086:0ea0] type 00 class 0x088000 [ 1.187748] pci 0000:ff:0e.1: [8086:0e30] type 00 class 0x110100 [ 1.188436] pci 0000:ff:0f.0: [8086:0ea8] type 00 class 0x088000 [ 1.189223] pci 0000:ff:0f.1: [8086:0e71] type 00 class 0x088000 [ 1.189932] pci 0000:ff:0f.2: [8086:0eaa] type 00 class 0x088000 [ 1.190721] pci 0000:ff:0f.3: [8086:0eab] type 00 class 0x088000 [ 1.191510] pci 0000:ff:0f.4: [8086:0eac] type 00 class 0x088000 [ 1.192297] pci 0000:ff:0f.5: [8086:0ead] type 00 class 0x088000 [ 1.193100] pci 0000:ff:10.0: [8086:0eb0] type 00 class 0x088000 [ 1.193893] pci 0000:ff:10.1: [8086:0eb1] type 00 class 0x088000 [ 1.194686] pci 0000:ff:10.2: [8086:0eb2] type 00 class 0x088000 [ 1.195488] pci 0000:ff:10.3: [8086:0eb3] type 00 class 0x088000 [ 1.196271] pci 0000:ff:10.4: [8086:0eb4] type 00 class 0x088000 [ 1.197057] pci 0000:ff:10.5: [8086:0eb5] type 00 class 0x088000 [ 1.197843] pci 0000:ff:10.6: [8086:0eb6] type 00 class 0x088000 [ 1.198634] pci 0000:ff:10.7: [8086:0eb7] type 00 class 0x088000 [ 1.199411] pci 0000:ff:13.0: [8086:0e1d] type 00 class 0x088000 [ 1.200006] pci 0000:ff:13.1: [8086:0e34] type 00 class 0x110100 [ 1.200624] pci 0000:ff:13.4: [8086:0e81] type 00 class 0x088000 [ 1.201218] pci 0000:ff:13.5: [8086:0e36] type 00 class 0x110100 [ 1.201777] pci 0000:ff:16.0: [8086:0ec8] type 00 class 0x088000 [ 1.202376] pci 0000:ff:16.1: [8086:0ec9] type 00 class 0x088000 [ 1.202970] pci 0000:ff:16.2: [8086:0eca] type 00 class 0x088000 [ 1.203651] pci_bus 0000:ff: on NUMA node 0 [ 1.203841] ACPI: PCI: Interrupt link LNKA configured for IRQ 11 [ 1.204092] ACPI: PCI: Interrupt link LNKB configured for IRQ 10 [ 1.204354] ACPI: PCI: Interrupt link LNKC configured for IRQ 5 [ 1.204600] ACPI: PCI: Interrupt link LNKD configured for IRQ 11 [ 1.204845] ACPI: PCI: Interrupt link LNKE configured for IRQ 0 [ 1.205089] ACPI: PCI: Interrupt link LNKF configured for IRQ 0 [ 1.205341] ACPI: PCI: Interrupt link LNKG configured for IRQ 0 [ 1.205590] ACPI: PCI: Interrupt link LNKH configured for IRQ 7 [ 1.207574] xen:balloon: Initialising balloon driver [ 1.207745] iommu: Default domain type: Translated [ 1.207745] iommu: DMA domain TLB invalidation policy: lazy mode [ 1.208377] SCSI subsystem initialized [ 1.208539] libata version 3.00 loaded. [ 1.208539] ACPI: bus type USB registered [ 1.208539] usbcore: registered new interface driver usbfs [ 1.208657] usbcore: registered new interface driver hub [ 1.208804] usbcore: registered new device driver usb [ 1.209312] pps_core: LinuxPPS API ver. 1 registered [ 1.209449] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti [ 1.209627] PTP clock support registered [ 1.209799] Advanced Linux Sound Architecture Driver Initialized. [ 1.209799] NetLabel: Initializing [ 1.210412] NetLabel: domain hash size = 128 [ 1.210545] NetLabel: protocols = UNLABELED CIPSOv4 CALIPSO [ 1.210707] NetLabel: unlabeled traffic allowed by default [ 1.210883] PCI: Using ACPI for IRQ routing [ 1.270435] PCI: pci_cache_line_size set to 64 bytes [ 1.271464] e820: reserve RAM buffer [mem 0x0009a000-0x0009ffff] [ 1.271468] e820: reserve RAM buffer [mem 0x20066000-0x23ffffff] [ 1.271509] pci 0000:07:01.0: vgaarb: setting as boot VGA device [ 1.271509] pci 0000:07:01.0: vgaarb: bridge control possible [ 1.271609] pci 0000:07:01.0: vgaarb: VGA device added: decodes=io+mem,owns=io+mem,locks=none [ 1.271783] vgaarb: loaded [ 1.274199] clocksource: Switched to clocksource tsc-early [ 1.274199] VFS: Disk quotas dquot_6.6.0 [ 1.274199] VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes) [ 1.274199] hugetlbfs: disabling because there are no supported hugepage sizes [ 1.274199] pnp: PnP ACPI init [ 1.274301] system 00:00: [mem 0xfc000000-0xfcffffff] has been reserved [ 1.274449] system 00:00: [mem 0xfd000000-0xfdffffff] has been reserved [ 1.274449] system 00:00: [mem 0xfe000000-0xfeafffff] has been reserved [ 1.274449] system 00:00: [mem 0xfeb00000-0xfebfffff] has been reserved [ 1.274449] system 00:01: [mem 0xfbffc000-0xfbffdfff] could not be reserved [ 1.274449] xen: registering gsi 8 triggering 1 polarity 0 [ 1.275363] system 00:03: [io 0x04d0-0x04d1] has been reserved [ 1.275510] system 00:03: [mem 0x00000400-0x000004ff] could not be reserved [ 1.275823] xen: registering gsi 12 triggering 1 polarity 0 [ 1.276060] system 00:06: [io 0x0b00-0x0b7f] has been reserved [ 1.276564] xen: registering gsi 4 triggering 1 polarity 0 [ 1.276571] Already setup the GSI :4 [ 1.276706] pnp 00:07: [dma 0 disabled] [ 1.277077] xen: registering gsi 3 triggering 1 polarity 0 [ 1.277094] pnp 00:08: [dma 0 disabled] [ 1.277580] system 00:09: [io 0x0400-0x0453] has been reserved [ 1.277728] system 00:09: [io 0x0458-0x047f] has been reserved [ 1.277868] system 00:09: [io 0x1180-0x119f] has been reserved [ 1.278009] system 00:09: [io 0x0500-0x057f] has been reserved [ 1.278149] system 00:09: [mem 0xfed1c000-0xfed1ffff] has been reserved [ 1.278311] system 00:09: [mem 0xfec00000-0xfecfffff] could not be reserved [ 1.278456] system 00:09: [mem 0xff000000-0xffffffff] has been reserved [ 1.278722] system 00:0a: [io 0x0454-0x0457] has been reserved [ 1.279262] system 00:0b: [mem 0x00000000-0x0009ffff] could not be reserved [ 1.279688] pnp: PnP ACPI: found 12 devices [ 1.328690] PM-Timer failed consistency check (0xffffff) - aborting. [ 1.328927] NET: Registered PF_INET protocol family [ 1.329133] IP idents hash table entries: 8192 (order: 4, 65536 bytes, linear) [ 1.329625] tcp_listen_portaddr_hash hash table entries: 256 (order: 0, 4096 bytes, linear) [ 1.329800] Table-perturb hash table entries: 65536 (order: 6, 262144 bytes, linear) [ 1.329971] TCP established hash table entries: 4096 (order: 3, 32768 bytes, linear) [ 1.330145] TCP bind hash table entries: 4096 (order: 5, 131072 bytes, linear) [ 1.330366] TCP: Hash tables configured (established 4096 bind 4096) [ 1.330579] UDP hash table entries: 256 (order: 1, 8192 bytes, linear) [ 1.330774] UDP-Lite hash table entries: 256 (order: 1, 8192 bytes, linear) [ 1.330959] NET: Registered PF_UNIX/PF_LOCAL protocol family [ 1.331527] RPC: Registered named UNIX socket transport module. [ 1.331680] RPC: Registered udp transport module. [ 1.331815] RPC: Registered tcp transport module. [ 1.331948] RPC: Registered tcp NFSv4.1 backchannel transport module. [ 1.332605] pci 0000:00:01.0: PCI bridge to [bus 01] [ 1.332857] pci 0000:00:01.1: PCI bridge to [bus 02] [ 1.333062] pci 0000:00:03.0: PCI bridge to [bus 03] [ 1.333268] pci 0000:00:11.0: PCI bridge to [bus 04] [ 1.333436] pci 0000:00:11.0: bridge window [io 0xe000-0xefff] [ 1.333617] pci 0000:00:11.0: bridge window [mem 0xfa000000-0xfa4fffff 64bit pref] [ 1.333816] pci 0000:00:1c.0: PCI bridge to [bus 05] [ 1.333960] pci 0000:00:1c.0: bridge window [io 0xd000-0xdfff] [ 1.334163] pci 0000:00:1c.0: bridge window [mem 0xfba00000-0xfbafffff] [ 1.334368] pci 0000:00:1c.1: PCI bridge to [bus 06] [ 1.334514] pci 0000:00:1c.1: bridge window [io 0xc000-0xcfff] [ 1.334677] pci 0000:00:1c.1: bridge window [mem 0xfb900000-0xfb9fffff] [ 1.334868] pci 0000:00:1e.0: PCI bridge to [bus 07] [ 1.335027] pci 0000:00:1e.0: bridge window [mem 0xfb000000-0xfb8fffff] [ 1.335185] pci 0000:00:1e.0: bridge window [mem 0xf9000000-0xf9ffffff 64bit pref] [ 1.335398] pci_bus 0000:00: resource 4 [io 0x0000-0x03af window] [ 1.335579] pci_bus 0000:00: resource 5 [io 0x03e0-0x0cf7 window] [ 1.335720] pci_bus 0000:00: resource 6 [io 0x03b0-0x03df window] [ 1.335861] pci_bus 0000:00: resource 7 [io 0x0d00-0xffff window] [ 1.336001] pci_bus 0000:00: resource 8 [mem 0x000a0000-0x000dffff window] [ 1.336144] pci_bus 0000:00: resource 9 [mem 0xfed08000-0xfed08fff window] [ 1.336301] pci_bus 0000:00: resource 10 [mem 0xfed0e000-0xfed0ffff window] [ 1.336445] pci_bus 0000:00: resource 11 [mem 0x80000000-0xfbffffff window] [ 1.336589] pci_bus 0000:04: resource 0 [io 0xe000-0xefff] [ 1.336728] pci_bus 0000:04: resource 2 [mem 0xfa000000-0xfa4fffff 64bit pref] [ 1.336932] pci_bus 0000:05: resource 0 [io 0xd000-0xdfff] [ 1.337070] pci_bus 0000:05: resource 1 [mem 0xfba00000-0xfbafffff] [ 1.337211] pci_bus 0000:06: resource 0 [io 0xc000-0xcfff] [ 1.337362] pci_bus 0000:06: resource 1 [mem 0xfb900000-0xfb9fffff] [ 1.337511] pci_bus 0000:07: resource 1 [mem 0xfb000000-0xfb8fffff] [ 1.337652] pci_bus 0000:07: resource 2 [mem 0xf9000000-0xf9ffffff 64bit pref] [ 1.337816] pci_bus 0000:07: resource 4 [io 0x0000-0x03af window] [ 1.337956] pci_bus 0000:07: resource 5 [io 0x03e0-0x0cf7 window] [ 1.338096] pci_bus 0000:07: resource 6 [io 0x03b0-0x03df window] [ 1.338275] pci_bus 0000:07: resource 7 [io 0x0d00-0xffff window] [ 1.338431] pci_bus 0000:07: resource 8 [mem 0x000a0000-0x000dffff window] [ 1.338573] pci_bus 0000:07: resource 9 [mem 0xfed08000-0xfed08fff window] [ 1.338716] pci_bus 0000:07: resource 10 [mem 0xfed0e000-0xfed0ffff window] [ 1.338858] pci_bus 0000:07: resource 11 [mem 0x80000000-0xfbffffff window] [ 1.339191] pci 0000:00:05.0: disabled boot interrupts on device [8086:0e28] [ 1.339518] xen: registering gsi 16 triggering 0 polarity 1 [ 1.339556] xen: --> pirq=16 -> irq=16 (gsi=16) [ 1.356485] pci 0000:00:1a.0: quirk_usb_early_handoff+0x0/0x720 took 16667 usecs [ 1.362310] xen: registering gsi 23 triggering 0 polarity 1 [ 1.362339] xen: --> pirq=23 -> irq=23 (gsi=23) [ 1.379481] pci 0000:00:1d.0: quirk_usb_early_handoff+0x0/0x720 took 16899 usecs [ 1.380107] PCI: CLS 64 bytes, default 64 [ 1.380254] PCI-DMA: Using software bounce buffering for IO (SWIOTLB) [ 1.380385] Unpacking initramfs... [ 1.380411] software IO TLB: mapped [mem 0x000000001b180000-0x000000001f180000] (64MB) [ 1.380836] kvm: no hardware support for 'kvm_intel' [ 1.380977] has_svm: not amd or hygon [ 1.381147] kvm: no hardware support for 'kvm_amd' [ 1.381303] clocksource: tsc: mask: 0xffffffffffffffff max_cycles: 0x19f228ab7a2, max_idle_ns: 440795289252 ns [ 1.381543] clocksource: Switched to clocksource tsc [ 1.383459] Initialise system trusted keyrings [ 1.383794] workingset: timestamp_bits=62 max_order=17 bucket_order=0 [ 1.385785] NFS: Registering the id_resolver key type [ 1.385935] Key type id_resolver registered [ 1.386068] Key type id_legacy registered [ 1.386296] 9p: Installing v9fs 9p2000 file system support [ 1.404185] Key type asymmetric registered [ 1.404338] Asymmetric key parser 'x509' registered [ 1.404510] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 251) [ 1.404758] io scheduler mq-deadline registered [ 1.404896] io scheduler kyber registered [ 1.405759] xen: registering gsi 26 triggering 0 polarity 1 [ 1.405799] xen: --> pirq=26 -> irq=26 (gsi=26) [ 1.406599] xen: registering gsi 26 triggering 0 polarity 1 [ 1.406608] Already setup the GSI :26 [ 1.407509] xen: registering gsi 40 triggering 0 polarity 1 [ 1.407537] xen: --> pirq=40 -> irq=40 (gsi=40) [ 1.408263] xen: registering gsi 16 triggering 0 polarity 1 [ 1.408271] Already setup the GSI :16 [ 1.408819] xen: registering gsi 17 triggering 0 polarity 1 [ 1.408846] xen: --> pirq=17 -> irq=17 (gsi=17) [ 1.409205] xen: registering gsi 16 triggering 0 polarity 1 [ 1.409212] Already setup the GSI :16 [ 1.409893] input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input0 [ 1.410239] ACPI: button: Power Button [PWRB] [ 1.410436] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input1 [ 1.410771] ACPI: button: Power Button [PWRF] [ 1.411185] Monitor-Mwait will be used to enter C-1 state [ 1.411255] Monitor-Mwait will be used to enter C-2 state [ 1.411286] ACPI: \_SB_.SCK0.C000: Found 2 idle states [ 1.413176] ACPI: \_SB_.SCK0.C002: Found 2 idle states [ 1.414989] ACPI: \_SB_.SCK0.C004: Found 2 idle states [ 1.416907] ACPI: \_SB_.SCK0.C006: Found 2 idle states [ 1.419071] xen:xen_evtchn: Event-channel device installed [ 1.419338] xen_pciback: backend is vpci [ 1.420604] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled [ 1.421084] 00:08: ttyS1 at I/O 0x2f8 (irq = 3, base_baud = 115200) is a 16550A [ 1.422084] hpet_acpi_add: no address or irqs in _CRS [ 1.422338] Non-volatile memory driver v1.3 [ 1.422474] AMD-Vi: AMD IOMMUv2 functionality not available on this system - This is not a bug. [ 1.425621] loop: module loaded [ 1.433523] ahci 0000:00:1f.2: version 3.0 [ 1.433690] xen: registering gsi 18 triggering 0 polarity 1 [ 1.433732] xen: --> pirq=18 -> irq=18 (gsi=18) [ 1.444141] ahci 0000:00:1f.2: AHCI 0001.0300 32 slots 6 ports 6 Gbps 0x3f impl SATA mode [ 1.444320] ahci 0000:00:1f.2: flags: 64bit ncq sntf pm led clo pio slum part ems apst [ 1.460567] scsi host0: ahci [ 1.461191] scsi host1: ahci [ 1.461721] scsi host2: ahci [ 1.462189] scsi host3: ahci [ 1.462654] scsi host4: ahci [ 1.463160] scsi host5: ahci [ 1.463346] ata1: SATA max UDMA/133 abar m2048@0xfbb21000 port 0xfbb21100 irq 75 [ 1.463515] ata2: SATA max UDMA/133 abar m2048@0xfbb21000 port 0xfbb21180 irq 75 [ 1.463700] ata3: SATA max UDMA/133 abar m2048@0xfbb21000 port 0xfbb21200 irq 75 [ 1.463865] ata4: SATA max UDMA/133 abar m2048@0xfbb21000 port 0xfbb21280 irq 75 [ 1.464029] ata5: SATA max UDMA/133 abar m2048@0xfbb21000 port 0xfbb21300 irq 75 [ 1.464193] ata6: SATA max UDMA/133 abar m2048@0xfbb21000 port 0xfbb21380 irq 75 [ 1.464817] tun: Universal TUN/TAP device driver, 1.6 [ 1.465145] e100: Intel(R) PRO/100 Network Driver [ 1.465290] e100: Copyright(c) 1999-2006 Intel Corporation [ 1.465457] sky2: driver version 1.30 [ 1.465780] xen_netfront: Initialising Xen virtual ethernet driver [ 1.466299] xen: registering gsi 16 triggering 0 polarity 1 [ 1.466311] Already setup the GSI :16 [ 1.466571] ehci-pci 0000:00:1a.0: EHCI Host Controller [ 1.466850] ehci-pci 0000:00:1a.0: new USB bus registered, assigned bus number 1 [ 1.467068] ehci-pci 0000:00:1a.0: debug port 2 [ 1.471249] ehci-pci 0000:00:1a.0: irq 16, io mem 0xfbb23000 [ 1.477685] ehci-pci 0000:00:1a.0: USB 2.0 started, EHCI 1.00 [ 1.478059] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 6.01 [ 1.478235] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 1.478400] usb usb1: Product: EHCI Host Controller [ 1.478536] usb usb1: Manufacturer: Linux 6.1.92+ ehci_hcd [ 1.478703] usb usb1: SerialNumber: 0000:00:1a.0 [ 1.479131] hub 1-0:1.0: USB hub found [ 1.479295] hub 1-0:1.0: 2 ports detected [ 1.479868] xen: registering gsi 23 triggering 0 polarity 1 [ 1.479879] Already setup the GSI :23 [ 1.480120] ehci-pci 0000:00:1d.0: EHCI Host Controller [ 1.480394] ehci-pci 0000:00:1d.0: new USB bus registered, assigned bus number 2 [ 1.480609] ehci-pci 0000:00:1d.0: debug port 2 [ 1.484820] ehci-pci 0000:00:1d.0: irq 23, io mem 0xfbb22000 [ 1.491701] ehci-pci 0000:00:1d.0: USB 2.0 started, EHCI 1.00 [ 1.492019] usb usb2: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 6.01 [ 1.492189] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 1.492354] usb usb2: Product: EHCI Host Controller [ 1.492490] usb usb2: Manufacturer: Linux 6.1.92+ ehci_hcd [ 1.492662] usb usb2: SerialNumber: 0000:00:1d.0 [ 1.493075] hub 2-0:1.0: USB hub found [ 1.493244] hub 2-0:1.0: 2 ports detected [ 1.493845] usbcore: registered new interface driver usblp [ 1.494009] usbcore: registered new interface driver usb-storage [ 1.494204] i8042: PNP: PS/2 Controller [PNP0f03:PS2M] at 0x60,0x64 irq 12 [ 1.494349] i8042: PNP: PS/2 controller doesn't have KBD irq; using default 1 [ 1.497812] serio: i8042 KBD port at 0x60,0x64 irq 1 [ 1.497957] serio: i8042 AUX port at 0x60,0x64 irq 12 [ 1.498593] rtc_cmos 00:02: RTC can wake from S4 [ 1.499544] rtc_cmos 00:02: registered as rtc0 [ 1.499773] rtc_cmos 00:02: alarms up to one month, y3k, 114 bytes nvram [ 1.500023] device-mapper: uevent: version 1.0.3 [ 1.500252] xen: registering gsi 18 triggering 0 polarity 1 [ 1.500266] Already setup the GSI :18 [ 1.500336] device-mapper: ioctl: 4.47.0-ioctl (2022-07-28) initialised: dm-devel@redhat.com [ 1.500574] i801_smbus 0000:00:1f.3: SMBus using PCI interrupt [ 1.500580] intel_pstate: CPU model not supported [ 1.500674] i2c i2c-0: 1/6 memory slots populated (from DMI) [ 1.500770] hid: raw HID events driver (C) Jiri Kosina [ 1.500869] i2c i2c-0: Systems with more than 4 memory slots not supported yet, not instantiating SPD [ 1.501047] usbcore: registered new interface driver usbhid [ 1.501431] usbhid: USB HID core driver [ 1.502233] Initializing XFRM netlink socket [ 1.502547] NET: Registered PF_INET6 protocol family [ 1.503266] Segment Routing with IPv6 [ 1.503410] In-situ OAM (IOAM) with IPv6 [ 1.503588] sit: IPv6, IPv4 and MPLS over IPv4 tunneling driver [ 1.503922] NET: Registered PF_PACKET protocol family [ 1.504117] 9pnet: Installing 9P2000 support [ 1.504273] Key type dns_resolver registered [ 1.505087] IPI shorthand broadcast: enabled [ 1.505260] sched_clock: Marking stable (1399343371, 105626810)->(1682248815, -177278634) [ 1.505995] registered taskstats version 1 [ 1.506132] Loading compiled-in X.509 certificates [ 1.510145] PM: Magic number: 12:143:462 [ 1.510341] pci 0000:05:00.0: hash matches [ 1.510541] printk: console [netcon0] enabled [ 1.510699] netconsole: network logging started [ 1.511083] cfg80211: Loading compiled-in X.509 certificates for regulatory database [ 1.527563] Freeing initrd memory: 19884K [ 1.546896] cfg80211: Loaded X.509 cert 'sforshee: 00b28ddf47aef9cea7' [ 1.547357] cfg80211: Loaded X.509 cert 'wens: 61c038651aabdcf94bd0ac7ff06c7248db18c600' [ 1.548359] cfg80211: loaded regulatory.db is malformed or signature is missing/invalid [ 1.548579] ALSA device list: [ 1.548766] No soundcards found. [ 1.718715] usb 1-1: new high-speed USB device number 2 using ehci-pci [ 1.734730] usb 2-1: new high-speed USB device number 2 using ehci-pci [ 1.771718] ata1: SATA link up 6.0 Gbps (SStatus 133 SControl 300) [ 1.771891] ata5: SATA link down (SStatus 0 SControl 300) [ 1.772058] ata2: SATA link down (SStatus 0 SControl 300) [ 1.772224] ata4: SATA link down (SStatus 0 SControl 300) [ 1.772394] ata3: SATA link down (SStatus 0 SControl 300) [ 1.772556] ata6: SATA link down (SStatus 0 SControl 300) [ 1.774220] ata1.00: ATA-8: WDC WD1003FBYZ-010FB0, 01.01V03, max UDMA/133 [ 1.774768] ata1.00: 1953525168 sectors, multi 16: LBA48 NCQ (depth 32), AA [ 1.776688] ata1.00: configured for UDMA/133 [ 1.777136] scsi 0:0:0:0: Direct-Access ATA WDC WD1003FBYZ-0 1V03 PQ: 0 ANSI: 5 [ 1.778705] sd 0:0:0:0: Attached scsi generic sg0 type 0 [ 1.778832] sd 0:0:0:0: [sda] 1953525168 512-byte logical blocks: (1.00 TB/932 GiB) [ 1.779056] sd 0:0:0:0: [sda] Write Protect is off [ 1.779197] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00 [ 1.779312] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 1.779650] sd 0:0:0:0: [sda] Preferred minimum I/O size 512 bytes [ 1.805029] sda: sda1 sda2 < sda5 > [ 1.805628] sd 0:0:0:0: [sda] Attached SCSI disk [ 1.807490] Freeing unused kernel image (initmem) memory: 1580K [ 1.807701] Write protecting the kernel read-only data: 22528k [ 1.842504] Freeing unused kernel image (text/rodata gap) memory: 2032K [ 1.847095] usb 1-1: New USB device found, idVendor=8087, idProduct=0024, bcdDevice= 0.00 [ 1.848313] usb 1-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0 [ 1.848895] hub 1-1:1.0: USB hub found [ 1.849217] hub 1-1:1.0: 6 ports detected [ 1.850027] Freeing unused kernel image (rodata/data gap) memory: 1568K [ 2.124689] usb 1-1.1: new full-speed USB device number 3 using ehci-pci [ 2.204466] usb 1-1.1: New USB device found, idVendor=0557, idProduct=2221, bcdDevice= 0.01 [ 2.204666] usb 1-1.1: New USB device strings: Mfr=1, Product=2, SerialNumber=0 [ 2.204833] usb 1-1.1: Product: Hermon USB hidmouse Device [ 2.204971] usb 1-1.1: Manufacturer: Winbond Electronics Corp [ 2.206780] input: Winbond Electronics Corp Hermon USB hidmouse Device as /devices/pci0000:00/0000:00:1a.0/usb1/1-1/1-1.1/1-1.1:1.0/0003:0557:2221.0001/input/input5 [ 2.207251] hid-generic 0003:0557:2221.0001: input,hidraw0: USB HID v1.00 Mouse [Winbond Electronics Corp Hermon USB hidmouse Device] on usb-0000:00:1a.0-1.1/input0 [ 2.208730] input: Winbond Electronics Corp Hermon USB hidmouse Device as /devices/pci0000:00/0000:00:1a.0/usb1/1-1/1-1.1/1-1.1:1.1/0003:0557:2221.0002/input/input6 [ 2.261020] hid-generic 0003:0557:2221.0002: input,hidraw1: USB HID v1.00 Keyboard [Winbond Electronics Corp Hermon USB hidmouse Device] on usb-0000:00:1a.0-1.1/input1 [ 2.638583] x86/mm: Checked W+X mappings: passed, no W+X pages found. [ 2.638845] Run /init as init process [ 2.638988] with arguments: [ 2.638990] /init [ 2.638991] placeholder [ 2.638992] with environment: [ 2.638994] HOME=/ [ 2.638995] TERM=linux [ 2.651084] usb 2-1: New USB device found, idVendor=8087, idProduct=0024, bcdDevice= 0.00 [ 2.651261] usb 2-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0 [ 2.651759] hub 2-1:1.0: USB hub found [ 2.651959] hub 2-1:1.0: 8 ports detected [ 3.339341] isci: Intel(R) C600 SAS Controller Driver - version 1.2.0 [ 3.339539] isci 0000:04:00.0: driver configured for rev: 6 silicon [ 3.339763] isci 0000:04:00.0: OEM SAS parameters (version: 1.3) loaded (firmware) [ 3.340037] xen: registering gsi 16 triggering 0 polarity 1 [ 3.340048] Already setup the GSI :16 [ 3.342852] e1000e: Intel(R) PRO/1000 Network Driver [ 3.342999] e1000e: Copyright(c) 1999 - 2015 Intel Corporation. [ 3.349136] xen: registering gsi 16 triggering 0 polarity 1 [ 3.349148] Already setup the GSI :16 [ 3.349727] e1000e 0000:05:00.0: Interrupt Throttling Rate (ints/sec) set to dynamic conservative mode [ 3.358979] isci 0000:04:00.0: SCU controller 0: phy 3-0 cables: {short, short, short, short} [ 3.361795] scsi host6: isci [ 3.394764] e1000e 0000:05:00.0 0000:05:00.0 (uninitialized): registered PHC clock [ 3.438807] e1000e 0000:05:00.0 eth0: (PCI Express:2.5GT/s:Width x1) 0c:c4:7a:13:33:8c [ 3.438987] e1000e 0000:05:00.0 eth0: Intel(R) PRO/1000 Network Connection [ 3.439220] e1000e 0000:05:00.0 eth0: MAC: 3, PHY: 8, PBA No: FFFFFF-0FF [ 3.439543] xen: registering gsi 17 triggering 0 polarity 1 [ 3.439554] Already setup the GSI :17 [ 3.440126] e1000e 0000:06:00.0: Interrupt Throttling Rate (ints/sec) set to dynamic conservative mode [ 3.487987] e1000e 0000:06:00.0 0000:06:00.0 (uninitialized): registered PHC clock [ 3.532941] e1000e 0000:06:00.0 eth1: (PCI Express:2.5GT/s:Width x1) 0c:c4:7a:13:33:8d [ 3.533121] e1000e 0000:06:00.0 eth1: Intel(R) PRO/1000 Network Connection [ 3.533352] e1000e 0000:06:00.0 eth1: MAC: 3, PHY: 8, PBA No: FFFFFF-0FF [ 3.537290] e1000e 0000:05:00.0 enx0cc47a13338c: renamed from eth0 [ 3.545286] e1000e 0000:06:00.0 enx0cc47a13338d: renamed from eth1 [ 4.384554] EXT4-fs (dm-0): mounting ext3 file system using the ext4 subsystem [ 4.390761] EXT4-fs (dm-0): mounted filesystem with ordered data mode. Quota mode: none. [ 9.251733] EXT4-fs (dm-0): re-mounted. Quota mode: none. [ 11.178009] EXT4-fs (sda1): mounting ext3 file system using the ext4 subsystem [ 11.209410] EXT4-fs (sda1): mounted filesystem with ordered data mode. Quota mode: none. [ 11.391152] Adding 1949692k swap on /dev/mapper/fiano0--vg-swap_1. Priority:-2 extents:1 across:1949692k [ 13.232444] xenbr0: port 1(enx0cc47a13338c) entered blocking state [ 13.232679] xenbr0: port 1(enx0cc47a13338c) entered disabled state [ 13.232952] device enx0cc47a13338c entered promiscuous mode [ 16.491772] e1000e 0000:05:00.0 enx0cc47a13338c: NIC Link is Up 1000 Mbps Full Duplex, Flow Control: None [ 16.492318] IPv6: ADDRCONF(NETDEV_CHANGE): enx0cc47a13338c: link becomes ready [ 16.492518] xenbr0: port 1(enx0cc47a13338c) entered blocking state [ 16.492688] xenbr0: port 1(enx0cc47a13338c) entered forwarding state [ 16.492954] IPv6: ADDRCONF(NETDEV_CHANGE): xenbr0: link becomes ready