[ 0.000000] Linux version 6.10.0-rc3+ (osstest@pinot0) (gcc (Debian 12.2.0-14) 12.2.0, GNU ld (GNU Binutils for Debian) 2.40) #1 SMP PREEMPT_DYNAMIC Thu Jun 13 21:15:42 UTC 2024 [ 0.000000] Command line: placeholder root=/dev/mapper/debina1--vg-root ro console=hvc0 [ 0.000000] Released 0 page(s) [ 0.000000] BIOS-provided physical RAM map: [ 0.000000] Xen: [mem 0x0000000000000000-0x0000000000099fff] usable [ 0.000000] Xen: [mem 0x000000000009ac00-0x00000000000fffff] reserved [ 0.000000] Xen: [mem 0x0000000000100000-0x0000000020065fff] usable [ 0.000000] Xen: [mem 0x00000000796ef000-0x00000000798bdfff] reserved [ 0.000000] Xen: [mem 0x00000000799b7000-0x0000000079e5afff] ACPI NVS [ 0.000000] Xen: [mem 0x0000000079e5b000-0x000000007bdb0fff] reserved [ 0.000000] Xen: [mem 0x000000007bdb2000-0x000000007be37fff] reserved [ 0.000000] Xen: [mem 0x0000000080000000-0x000000008fffffff] reserved [ 0.000000] Xen: [mem 0x00000000fbffc000-0x00000000fbffcfff] reserved [ 0.000000] Xen: [mem 0x00000000fec00000-0x00000000fec00fff] reserved [ 0.000000] Xen: [mem 0x00000000fed1c000-0x00000000fed1ffff] reserved [ 0.000000] Xen: [mem 0x00000000fee00000-0x00000000feefffff] reserved [ 0.000000] Xen: [mem 0x00000000ff000000-0x00000000ffffffff] reserved [ 0.000000] NX (Execute Disable) protection: active [ 0.000000] APIC: Static calls initialized [ 0.000000] SMBIOS 2.8 present. [ 0.000000] DMI: Supermicro SYS-5018D-FN8T/X10SDV-TP8F, BIOS 1.0b 11/21/2016 [ 0.000000] DMI: Memory slots populated: 1/4 [ 0.000000] Hypervisor detected: Xen PV [ 0.000029] Xen PV: Detected 8 vCPUS [ 0.000486] tsc: Detected 2199.998 MHz processor [ 0.000919] e820: update [mem 0x00000000-0x00000fff] usable ==> reserved [ 0.000923] e820: remove [mem 0x000a0000-0x000fffff] usable [ 0.000930] last_pfn = 0x20066 max_arch_pfn = 0x400000000 [ 0.000932] MTRR map: 2 entries (0 fixed + 2 variable; max 20), built from 10 variable MTRRs [ 0.000934] MTRRs set to read-only [ 0.000938] x86/PAT: Configuration [0-7]: WB WT UC- UC WC WP UC UC [ 0.000979] Kernel/User page tables isolation: disabled on XEN PV. [ 0.026802] RAMDISK: [mem 0x04000000-0x053a5fff] [ 0.026811] ACPI: Early table checksum verification disabled [ 0.027412] ACPI: RSDP 0x00000000000F0580 000024 (v02 SUPERM) [ 0.027423] ACPI: XSDT 0x00000000799FF0A0 0000BC (v01 SUPERM SMCI--MB 01072009 AMI 00010013) [ 0.027460] ACPI: FACP 0x0000000079A17AC8 00010C (v05 SUPERM SMCI--MB 01072009 AMI 00010013) [ 0.027509] ACPI: DSDT 0x00000000799FF1F0 0188D5 (v02 SUPERM SMCI--MB 01072009 INTL 20091013) [ 0.027525] ACPI: FACS 0x0000000079E59F80 000040 [ 0.027540] ACPI: APIC 0x0000000079A17BD8 0000BC (v03 SUPERM SMCI--MB 01072009 AMI 00010013) [ 0.027556] ACPI: FPDT 0x0000000079A17C98 000044 (v01 SUPERM SMCI--MB 01072009 AMI 00010013) [ 0.027572] ACPI: FIDT 0x0000000079A17CE0 00009C (v01 SUPERM SMCI--MB 01072009 AMI 00010013) [ 0.027588] ACPI: SPMI 0x0000000079A17D80 000040 (v05 SUPERM SMCI--MB 00000000 AMI. 00000000) [ 0.027604] ACPI: MCFG 0x0000000079A17DC0 00003C (v01 SUPERM SMCI--MB 01072009 MSFT 00000097) [ 0.027620] ACPI: UEFI 0x0000000079A17E00 000042 (v01 00000000 00000000) [ 0.027636] ACPI: DBG2 0x0000000079A17E48 000072 (v00 SUPERM SMCI--MB 00000000 INTL 20091013) [ 0.027652] ACPI: HPET 0x0000000079A17EC0 000038 (v01 SUPERM SMCI--MB 00000001 INTL 20091013) [ 0.027668] ACPI: WDDT 0x0000000079A17EF8 000040 (v01 SUPERM SMCI--MB 00000000 INTL 20091013) [ 0.027684] ACPI: SSDT 0x0000000079A17F38 00ED8B (v01 AMI PmMgt 00000001 INTL 20120913) [ 0.027700] ACPI: SSDT 0x0000000079A26CC8 002285 (v02 SUPERM SpsNm 00000002 INTL 20120913) [ 0.027716] ACPI: SSDT 0x0000000079A28F50 000064 (v02 SUPERM SpsNvs 00000002 INTL 20120913) [ 0.027732] ACPI: PRAD 0x0000000079A28FB8 000102 (v02 SUPERM SMCI--MB 00000002 INTL 20120913) [ 0.027748] ACPI: RMAD 0x0000000079A290C0 0000CC (v01 SUPERM SMCI--MB 00000001 INTL 20091013) [ 0.027764] ACPI: HEST 0x0000000079A29190 0000A8 (v01 SUPERM SMCI--MB 00000001 INTL 00000001) [ 0.027780] ACPI: BERT 0x0000000079A29238 000030 (v01 SUPERM SMCI--MB 00000001 INTL 00000001) [ 0.027796] ACPI: ERST 0x0000000079A29268 000230 (v01 SUPERM SMCI--MB 00000001 INTL 00000001) [ 0.027812] ACPI: EINJ 0x0000000079A29498 000130 (v01 SUPERM SMCI--MB 00000001 INTL 00000001) [ 0.027821] ACPI: Reserving FACP table memory at [mem 0x79a17ac8-0x79a17bd3] [ 0.027822] ACPI: Reserving DSDT table memory at [mem 0x799ff1f0-0x79a17ac4] [ 0.027824] ACPI: Reserving FACS table memory at [mem 0x79e59f80-0x79e59fbf] [ 0.027825] ACPI: Reserving APIC table memory at [mem 0x79a17bd8-0x79a17c93] [ 0.027825] ACPI: Reserving FPDT table memory at [mem 0x79a17c98-0x79a17cdb] [ 0.027826] ACPI: Reserving FIDT table memory at [mem 0x79a17ce0-0x79a17d7b] [ 0.027827] ACPI: Reserving SPMI table memory at [mem 0x79a17d80-0x79a17dbf] [ 0.027828] ACPI: Reserving MCFG table memory at [mem 0x79a17dc0-0x79a17dfb] [ 0.027829] ACPI: Reserving UEFI table memory at [mem 0x79a17e00-0x79a17e41] [ 0.027830] ACPI: Reserving DBG2 table memory at [mem 0x79a17e48-0x79a17eb9] [ 0.027831] ACPI: Reserving HPET table memory at [mem 0x79a17ec0-0x79a17ef7] [ 0.027832] ACPI: Reserving WDDT table memory at [mem 0x79a17ef8-0x79a17f37] [ 0.027833] ACPI: Reserving SSDT table memory at [mem 0x79a17f38-0x79a26cc2] [ 0.027834] ACPI: Reserving SSDT table memory at [mem 0x79a26cc8-0x79a28f4c] [ 0.027835] ACPI: Reserving SSDT table memory at [mem 0x79a28f50-0x79a28fb3] [ 0.027836] ACPI: Reserving PRAD table memory at [mem 0x79a28fb8-0x79a290b9] [ 0.027837] ACPI: Reserving RMAD table memory at [mem 0x79a290c0-0x79a2918b] [ 0.027838] ACPI: Reserving HEST table memory at [mem 0x79a29190-0x79a29237] [ 0.027838] ACPI: Reserving BERT table memory at [mem 0x79a29238-0x79a29267] [ 0.027839] ACPI: Reserving ERST table memory at [mem 0x79a29268-0x79a29497] [ 0.027840] ACPI: Reserving EINJ table memory at [mem 0x79a29498-0x79a295c7] [ 0.027948] APIC: Switched APIC routing to: Xen PV [ 0.032032] Zone ranges: [ 0.032033] DMA [mem 0x0000000000001000-0x0000000000ffffff] [ 0.032035] DMA32 [mem 0x0000000001000000-0x0000000020065fff] [ 0.032037] Normal empty [ 0.032038] Movable zone start for each node [ 0.032039] Early memory node ranges [ 0.032040] node 0: [mem 0x0000000000001000-0x0000000000099fff] [ 0.032042] node 0: [mem 0x0000000000100000-0x0000000020065fff] [ 0.032044] Initmem setup node 0 [mem 0x0000000000001000-0x0000000020065fff] [ 0.032049] On node 0, zone DMA: 1 pages in unavailable ranges [ 0.032088] On node 0, zone DMA: 102 pages in unavailable ranges [ 0.033567] On node 0, zone DMA32: 32666 pages in unavailable ranges [ 0.033573] p2m virtual area at (____ptrval____), size is 40000000 [ 0.160157] Remapped 102 page(s) [ 0.161538] ACPI: PM-Timer IO Port: 0x408 [ 0.161607] ACPI: LAPIC_NMI (acpi_id[0x00] high level lint[0x1]) [ 0.161609] ACPI: LAPIC_NMI (acpi_id[0x02] high level lint[0x1]) [ 0.161611] ACPI: LAPIC_NMI (acpi_id[0x04] high level lint[0x1]) [ 0.161613] ACPI: LAPIC_NMI (acpi_id[0x06] high level lint[0x1]) [ 0.161614] ACPI: LAPIC_NMI (acpi_id[0x01] high level lint[0x1]) [ 0.161616] ACPI: LAPIC_NMI (acpi_id[0x03] high level lint[0x1]) [ 0.161618] ACPI: LAPIC_NMI (acpi_id[0x05] high level lint[0x1]) [ 0.161619] ACPI: LAPIC_NMI (acpi_id[0x07] high level lint[0x1]) [ 0.161648] IOAPIC[0]: apic_id 8, version 32, address 0xfec00000, GSI 0-23 [ 0.161662] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl) [ 0.161665] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level) [ 0.161692] ACPI: Using ACPI (MADT) for SMP configuration information [ 0.161697] ACPI: HPET id: 0x8086a701 base: 0xfed00000 [ 0.161709] CPU topo: Max. logical packages: 1 [ 0.161710] CPU topo: Max. logical dies: 1 [ 0.161711] CPU topo: Max. dies per package: 1 [ 0.161717] CPU topo: Max. threads per core: 2 [ 0.161718] CPU topo: Num. cores per package: 4 [ 0.161719] CPU topo: Num. threads per package: 8 [ 0.161720] CPU topo: Allowing 8 present CPUs plus 0 hotplug CPUs [ 0.161734] PM: hibernation: Registered nosave memory: [mem 0x00000000-0x00000fff] [ 0.161736] PM: hibernation: Registered nosave memory: [mem 0x0009a000-0x0009afff] [ 0.161738] PM: hibernation: Registered nosave memory: [mem 0x0009b000-0x000fffff] [ 0.161739] [mem 0x90000000-0xfbffbfff] available for PCI devices [ 0.161744] Booting kernel on Xen [ 0.161745] Xen version: 4.19-unstable (preserve-AD) [ 0.161748] clocksource: refined-jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 1910969940391419 ns [ 0.168864] setup_percpu: NR_CPUS:64 nr_cpumask_bits:8 nr_cpu_ids:8 nr_node_ids:1 [ 0.169348] percpu: Embedded 57 pages/cpu s194408 r8192 d30872 u262144 [ 0.169354] pcpu-alloc: s194408 r8192 d30872 u262144 alloc=1*2097152 [ 0.169358] pcpu-alloc: [0] 0 1 2 3 4 5 6 7 [ 0.169429] xen: PV spinlocks enabled [ 0.169433] PV qspinlock hash table entries: 256 (order: 0, 4096 bytes, linear) [ 0.169435] Kernel command line: placeholder root=/dev/mapper/debina1--vg-root ro console=hvc0 [ 0.169477] Unknown kernel command line parameters "placeholder", will be passed to user space. [ 0.169489] random: crng init done [ 0.169566] Dentry cache hash table entries: 65536 (order: 7, 524288 bytes, linear) [ 0.169606] Inode-cache hash table entries: 32768 (order: 6, 262144 bytes, linear) [ 0.170933] Built 1 zonelists, mobility grouping on. Total pages: 131071 [ 0.170937] mem auto-init: stack:all(zero), heap alloc:off, heap free:off, mlocked free:off [ 0.170939] software IO TLB: area num 8. [ 0.234158] Memory: 385604K/524284K available (16384K kernel code, 2753K rwdata, 6164K rodata, 2680K init, 1864K bss, 138428K reserved, 0K cma-reserved) [ 0.234320] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=8, Nodes=1 [ 0.236918] Dynamic Preempt: voluntary [ 0.237169] rcu: Preemptible hierarchical RCU implementation. [ 0.237170] rcu: RCU event tracing is enabled. [ 0.237170] rcu: RCU restricting CPUs from NR_CPUS=64 to nr_cpu_ids=8. [ 0.237173] Trampoline variant of Tasks RCU enabled. [ 0.237173] rcu: RCU calculated value of scheduler-enlistment delay is 100 jiffies. [ 0.237174] rcu: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=8 [ 0.237209] RCU Tasks: Setting shift to 3 and lim to 1 rcu_task_cb_adjust=1. [ 0.248908] NR_IRQS: 4352, nr_irqs: 488, preallocated irqs: 16 [ 0.249064] xen:events: Using FIFO-based ABI [ 0.249087] xen: --> pirq=1 -> irq=1 (gsi=1) [ 0.249096] xen: --> pirq=2 -> irq=2 (gsi=2) [ 0.249103] xen: --> pirq=3 -> irq=3 (gsi=3) [ 0.249111] xen: --> pirq=4 -> irq=4 (gsi=4) [ 0.249119] xen: --> pirq=5 -> irq=5 (gsi=5) [ 0.249127] xen: --> pirq=6 -> irq=6 (gsi=6) [ 0.249134] xen: --> pirq=7 -> irq=7 (gsi=7) [ 0.249142] xen: --> pirq=8 -> irq=8 (gsi=8) [ 0.249149] xen: --> pirq=9 -> irq=9 (gsi=9) [ 0.249157] xen: --> pirq=10 -> irq=10 (gsi=10) [ 0.249164] xen: --> pirq=11 -> irq=11 (gsi=11) [ 0.249172] xen: --> pirq=12 -> irq=12 (gsi=12) [ 0.249180] xen: --> pirq=13 -> irq=13 (gsi=13) [ 0.249188] xen: --> pirq=14 -> irq=14 (gsi=14) [ 0.249196] xen: --> pirq=15 -> irq=15 (gsi=15) [ 0.249206] rcu: srcu_init: Setting srcu_struct sizes based on contention. [ 0.254592] Console: colour VGA+ 80x25 [ 0.254596] printk: legacy console [tty0] enabled [ 0.273888] printk: legacy console [hvc0] enabled [ 0.275278] ACPI: Core revision 20240322 [ 0.289334] clocksource: xen: mask: 0xffffffffffffffff max_cycles: 0x1cd42e4dffb, max_idle_ns: 881590591483 ns [ 0.289493] Xen: using vcpuop timer interface [ 0.289501] installing Xen timer for CPU 0 [ 0.289661] clocksource: tsc-early: mask: 0xffffffffffffffff max_cycles: 0x1fb63109b96, max_idle_ns: 440795265316 ns [ 0.289821] Calibrating delay loop (skipped), value calculated using timer frequency.. 4399.99 BogoMIPS (lpj=2199998) [ 0.290153] Last level iTLB entries: 4KB 64, 2MB 8, 4MB 8 [ 0.290270] Last level dTLB entries: 4KB 64, 2MB 0, 4MB 0, 1GB 4 [ 0.290398] Spectre V1 : Mitigation: usercopy/swapgs barriers and __user pointer sanitization [ 0.290548] Spectre V2 : Mitigation: Retpolines [ 0.290828] Spectre V2 : Spectre v2 / SpectreRSB mitigation: Filling RSB on context switch [ 0.290991] Spectre V2 : Spectre v2 / SpectreRSB : Filling RSB on VMEXIT [ 0.291111] Spectre V2 : Enabling Restricted Speculation for firmware calls [ 0.291232] Spectre V2 : mitigation: Enabling conditional Indirect Branch Prediction Barrier [ 0.291381] Spectre V2 : User space: Mitigation: STIBP via prctl [ 0.291825] Speculative Store Bypass: Mitigation: Speculative Store Bypass disabled via prctl [ 0.291978] MDS: Mitigation: Clear CPU buffers [ 0.292091] TAA: Mitigation: Clear CPU buffers [ 0.292205] MMIO Stale Data: Vulnerable: Clear CPU buffers attempted, no microcode [ 0.292370] x86/fpu: Supporting XSAVE feature 0x001: 'x87 floating point registers' [ 0.292515] x86/fpu: Supporting XSAVE feature 0x002: 'SSE registers' [ 0.292635] x86/fpu: Supporting XSAVE feature 0x004: 'AVX registers' [ 0.292755] x86/fpu: xstate_offset[2]: 576, xstate_sizes[2]: 256 [ 0.292823] x86/fpu: Enabled xstate features 0x7, context size is 832 bytes, using 'standard' format. [ 0.315496] Freeing SMP alternatives memory: 40K [ 0.315627] pid_max: default: 32768 minimum: 301 [ 0.315764] LSM: initializing lsm=capability,selinux [ 0.315827] SELinux: Initializing. [ 0.315964] Mount-cache hash table entries: 1024 (order: 1, 8192 bytes, linear) [ 0.316112] Mountpoint-cache hash table entries: 1024 (order: 1, 8192 bytes, linear) [ 0.316907] cpu 0 spinlock event irq 25 [ 0.317026] VPMU disabled by hypervisor. [ 0.317601] Performance Events: unsupported p6 CPU model 86 no PMU driver, software events only. [ 0.317756] signal: max sigframe size: 1776 [ 0.317895] rcu: Hierarchical SRCU implementation. [ 0.318011] rcu: Max phase no-delay instances is 400. [ 0.318654] smp: Bringing up secondary CPUs ... [ 0.319012] installing Xen timer for CPU 1 [ 0.319471] installing Xen timer for CPU 2 [ 0.319919] installing Xen timer for CPU 3 [ 0.041610] [Firmware Bug]: CPU 1: APIC ID mismatch. Firmware: 0x0002 APIC: 0x0001 [ 0.320148] cpu 1 spinlock event irq 45 [ 0.320965] MDS CPU bug present and SMT on, data leak possible. See https://www.kernel.org/doc/html/latest/admin-guide/hw-vuln/mds.html for more details. [ 0.321137] TAA CPU bug present and SMT on, data leak possible. See https://www.kernel.org/doc/html/latest/admin-guide/hw-vuln/tsx_async_abort.html for more details. [ 0.321327] MMIO Stale Data CPU bug present and SMT on, data leak possible. See https://www.kernel.org/doc/html/latest/admin-guide/hw-vuln/processor_mmio_stale_data.html for more details. [ 0.041610] [Firmware Bug]: CPU 2: APIC ID mismatch. Firmware: 0x0004 APIC: 0x0002 [ 0.321868] cpu 2 spinlock event irq 46 [ 0.041610] [Firmware Bug]: CPU 3: APIC ID mismatch. Firmware: 0x0006 APIC: 0x0003 [ 0.322134] cpu 3 spinlock event irq 47 [ 0.323053] installing Xen timer for CPU 4 [ 0.323511] installing Xen timer for CPU 5 [ 0.324064] installing Xen timer for CPU 6 [ 0.324482] installing Xen timer for CPU 7 [ 0.041610] [Firmware Bug]: CPU 4: APIC ID mismatch. Firmware: 0x0001 APIC: 0x0004 [ 0.324864] cpu 4 spinlock event irq 68 [ 0.041610] [Firmware Bug]: CPU 5: APIC ID mismatch. Firmware: 0x0003 APIC: 0x0005 [ 0.325126] cpu 5 spinlock event irq 69 [ 0.041610] [Firmware Bug]: CPU 6: APIC ID mismatch. Firmware: 0x0005 APIC: 0x0006 [ 0.325865] cpu 6 spinlock event irq 70 [ 0.326129] cpu 7 spinlock event irq 71 [ 0.327036] smp: Brought up 1 node, 8 CPUs [ 0.327274] devtmpfs: initialized [ 0.327274] x86/mm: Memory block size: 128MB [ 0.328148] ACPI: PM: Registering ACPI NVS region [mem 0x799b7000-0x79e5afff] (4866048 bytes) [ 0.328148] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 1911260446275000 ns [ 0.328239] futex hash table entries: 2048 (order: 5, 131072 bytes, linear) [ 0.328827] PM: RTC time: 22:24:19, date: 2024-06-13 [ 0.329087] NET: Registered PF_NETLINK/PF_ROUTE protocol family [ 0.329236] xen:grant_table: Grant tables using version 1 layout [ 0.329374] Grant table initialized [ 0.329721] audit: initializing netlink subsys (disabled) [ 0.329860] audit: type=2000 audit(1718317459.373:1): state=initialized audit_enabled=0 res=1 [ 0.329896] thermal_sys: Registered thermal governor 'step_wise' [ 0.329896] thermal_sys: Registered thermal governor 'user_space' [ 0.330026] ACPI FADT declares the system doesn't support PCIe ASPM, so disable it [ 0.330475] PCI: ECAM [mem 0x80000000-0x8fffffff] (base 0x80000000) for domain 0000 [bus 00-ff] [ 0.463376] PCI: Using configuration type 1 for base access [ 0.463559] kprobes: kprobe jump-optimization is enabled. All kprobes are optimized if possible. [ 0.463896] ACPI: Added _OSI(Module Device) [ 0.463985] ACPI: Added _OSI(Processor Device) [ 0.464099] ACPI: Added _OSI(3.0 _SCP Extensions) [ 0.464213] ACPI: Added _OSI(Processor Aggregator Device) [ 0.493938] ACPI: 4 ACPI AML tables successfully acquired and loaded [ 0.496032] xen: registering gsi 9 triggering 0 polarity 0 [ 0.499108] ACPI: Dynamic OEM Table Load: [ 0.502190] ACPI: _OSC evaluated successfully for all CPUs [ 0.502514] ACPI: Interpreter enabled [ 0.502639] ACPI: PM: (supports S0 S4 S5) [ 0.502751] ACPI: Using IOAPIC for interrupt routing [ 0.502855] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug [ 0.503007] PCI: Using E820 reservations for host bridge windows [ 0.503585] ACPI: Enabled 6 GPEs in block 00 to 3F [ 0.529241] ACPI: PCI Root Bridge [UNC0] (domain 0000 [bus ff]) [ 0.529370] acpi PNP0A03:03: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI HPX-Type3] [ 0.529605] acpi PNP0A03:03: _OSC: platform does not support [LTR] [ 0.529876] acpi PNP0A03:03: _OSC: OS now controls [PME PCIeCapability] [ 0.529998] acpi PNP0A03:03: FADT indicates ASPM is unsupported, using BIOS configuration [ 0.530176] PCI host bridge to bus 0000:ff [ 0.530296] pci_bus 0000:ff: root bus resource [bus ff] [ 0.530491] pci 0000:ff:0b.0: [8086:6f81] type 00 class 0x088000 conventional PCI endpoint [ 0.531001] pci 0000:ff:0b.1: [8086:6f36] type 00 class 0x110100 conventional PCI endpoint [ 0.531463] pci 0000:ff:0b.2: [8086:6f37] type 00 class 0x110100 conventional PCI endpoint [ 0.531952] pci 0000:ff:0b.3: [8086:6f76] type 00 class 0x088000 conventional PCI endpoint [ 0.532428] pci 0000:ff:0c.0: [8086:6fe0] type 00 class 0x088000 conventional PCI endpoint [ 0.532913] pci 0000:ff:0c.1: [8086:6fe1] type 00 class 0x088000 conventional PCI endpoint [ 0.533378] pci 0000:ff:0c.2: [8086:6fe2] type 00 class 0x088000 conventional PCI endpoint [ 0.533835] pci 0000:ff:0c.3: [8086:6fe3] type 00 class 0x088000 conventional PCI endpoint [ 0.534323] pci 0000:ff:0f.0: [8086:6ff8] type 00 class 0x088000 conventional PCI endpoint [ 0.534796] pci 0000:ff:0f.4: [8086:6ffc] type 00 class 0x088000 conventional PCI endpoint [ 0.535132] pci 0000:ff:0f.5: [8086:6ffd] type 00 class 0x088000 conventional PCI endpoint [ 0.535587] pci 0000:ff:0f.6: [8086:6ffe] type 00 class 0x088000 conventional PCI endpoint [ 0.536055] pci 0000:ff:10.0: [8086:6f1d] type 00 class 0x088000 conventional PCI endpoint [ 0.536509] pci 0000:ff:10.1: [8086:6f34] type 00 class 0x110100 conventional PCI endpoint [ 0.536993] pci 0000:ff:10.5: [8086:6f1e] type 00 class 0x088000 conventional PCI endpoint [ 0.537449] pci 0000:ff:10.6: [8086:6f7d] type 00 class 0x110100 conventional PCI endpoint [ 0.537917] pci 0000:ff:10.7: [8086:6f1f] type 00 class 0x088000 conventional PCI endpoint [ 0.538379] pci 0000:ff:12.0: [8086:6fa0] type 00 class 0x088000 conventional PCI endpoint [ 0.538665] pci 0000:ff:12.1: [8086:6f30] type 00 class 0x110100 conventional PCI endpoint [ 0.539190] pci 0000:ff:13.0: [8086:6fa8] type 00 class 0x088000 conventional PCI endpoint [ 0.539697] pci 0000:ff:13.1: [8086:6f71] type 00 class 0x088000 conventional PCI endpoint [ 0.540188] pci 0000:ff:13.2: [8086:6faa] type 00 class 0x088000 conventional PCI endpoint [ 0.540688] pci 0000:ff:13.3: [8086:6fab] type 00 class 0x088000 conventional PCI endpoint [ 0.541207] pci 0000:ff:13.4: [8086:6fac] type 00 class 0x088000 conventional PCI endpoint [ 0.541710] pci 0000:ff:13.5: [8086:6fad] type 00 class 0x088000 conventional PCI endpoint [ 0.542200] pci 0000:ff:13.6: [8086:6fae] type 00 class 0x088000 conventional PCI endpoint [ 0.542660] pci 0000:ff:13.7: [8086:6faf] type 00 class 0x088000 conventional PCI endpoint [ 0.543136] pci 0000:ff:14.0: [8086:6fb0] type 00 class 0x088000 conventional PCI endpoint [ 0.543636] pci 0000:ff:14.1: [8086:6fb1] type 00 class 0x088000 conventional PCI endpoint [ 0.544142] pci 0000:ff:14.2: [8086:6fb2] type 00 class 0x088000 conventional PCI endpoint [ 0.544642] pci 0000:ff:14.3: [8086:6fb3] type 00 class 0x088000 conventional PCI endpoint [ 0.545177] pci 0000:ff:14.4: [8086:6fbc] type 00 class 0x088000 conventional PCI endpoint [ 0.545637] pci 0000:ff:14.5: [8086:6fbd] type 00 class 0x088000 conventional PCI endpoint [ 0.546108] pci 0000:ff:14.6: [8086:6fbe] type 00 class 0x088000 conventional PCI endpoint [ 0.546568] pci 0000:ff:14.7: [8086:6fbf] type 00 class 0x088000 conventional PCI endpoint [ 0.547143] pci 0000:ff:15.0: [8086:6fb4] type 00 class 0x088000 conventional PCI endpoint [ 0.547643] pci 0000:ff:15.1: [8086:6fb5] type 00 class 0x088000 conventional PCI endpoint [ 0.548152] pci 0000:ff:15.2: [8086:6fb6] type 00 class 0x088000 conventional PCI endpoint [ 0.548656] pci 0000:ff:15.3: [8086:6fb7] type 00 class 0x088000 conventional PCI endpoint [ 0.549209] pci 0000:ff:1e.0: [8086:6f98] type 00 class 0x088000 conventional PCI endpoint [ 0.549666] pci 0000:ff:1e.1: [8086:6f99] type 00 class 0x088000 conventional PCI endpoint [ 0.550133] pci 0000:ff:1e.2: [8086:6f9a] type 00 class 0x088000 conventional PCI endpoint [ 0.550594] pci 0000:ff:1e.3: [8086:6fc0] type 00 class 0x088000 conventional PCI endpoint [ 0.550880] pci 0000:ff:1e.4: [8086:6f9c] type 00 class 0x088000 conventional PCI endpoint [ 0.551352] pci 0000:ff:1f.0: [8086:6f88] type 00 class 0x088000 conventional PCI endpoint [ 0.551815] pci 0000:ff:1f.2: [8086:6f8a] type 00 class 0x088000 conventional PCI endpoint [ 0.552273] pci_bus 0000:ff: on NUMA node 0 [ 0.556518] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-fe]) [ 0.556652] acpi PNP0A08:00: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI HPX-Type3] [ 0.556932] acpi PNP0A08:00: _OSC: platform does not support [PME LTR] [ 0.557267] acpi PNP0A08:00: _OSC: OS now controls [PCIeCapability] [ 0.557387] acpi PNP0A08:00: FADT indicates ASPM is unsupported, using BIOS configuration [ 0.557896] PCI host bridge to bus 0000:00 [ 0.558019] pci_bus 0000:00: root bus resource [io 0x0000-0x0cf7 window] [ 0.558140] pci_bus 0000:00: root bus resource [io 0x1000-0xffff window] [ 0.558261] pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff window] [ 0.558407] pci_bus 0000:00: root bus resource [mem 0x90000000-0xfbffbfff window] [ 0.558552] pci_bus 0000:00: root bus resource [bus 00-fe] [ 0.558736] pci 0000:00:00.0: [8086:6f00] type 00 class 0x060000 PCIe Root Port [ 0.559364] pci 0000:00:01.0: [8086:6f02] type 01 class 0x060400 PCIe Root Port [ 0.559665] pci 0000:00:01.0: PCI bridge to [bus 01] [ 0.560081] pci 0000:00:01.0: PME# supported from D0 D3hot D3cold [ 0.560461] pci 0000:00:01.1: [8086:6f03] type 01 class 0x060400 PCIe Root Port [ 0.560761] pci 0000:00:01.1: PCI bridge to [bus 02] [ 0.561123] pci 0000:00:01.1: PME# supported from D0 D3hot D3cold [ 0.561524] pci 0000:00:02.0: [8086:6f04] type 01 class 0x060400 PCIe Root Port [ 0.561828] pci 0000:00:02.0: PCI bridge to [bus 03] [ 0.561967] pci 0000:00:02.0: bridge window [mem 0xfb500000-0xfb5fffff] [ 0.562369] pci 0000:00:02.0: PME# supported from D0 D3hot D3cold [ 0.562737] pci 0000:00:02.2: [8086:6f06] type 01 class 0x060400 PCIe Root Port [ 0.562978] pci 0000:00:02.2: PCI bridge to [bus 04] [ 0.563116] pci 0000:00:02.2: bridge window [mem 0xfb400000-0xfb4fffff] [ 0.563281] pci 0000:00:02.2: bridge window [mem 0xfba00000-0xfbefffff 64bit pref] [ 0.563664] pci 0000:00:02.2: PME# supported from D0 D3hot D3cold [ 0.564054] pci 0000:00:03.0: [8086:6f08] type 01 class 0x060400 PCIe Root Port [ 0.564354] pci 0000:00:03.0: PCI bridge to [bus 05] [ 0.564772] pci 0000:00:03.0: PME# supported from D0 D3hot D3cold [ 0.565084] pci 0000:00:03.2: [8086:6f0a] type 01 class 0x060400 PCIe Root Port [ 0.565385] pci 0000:00:03.2: PCI bridge to [bus 06] [ 0.565798] pci 0000:00:03.2: PME# supported from D0 D3hot D3cold [ 0.566084] pci 0000:00:05.0: [8086:6f28] type 00 class 0x088000 PCIe Root Complex Integrated Endpoint [ 0.566696] pci 0000:00:05.1: [8086:6f29] type 00 class 0x088000 PCIe Root Complex Integrated Endpoint [ 0.567342] pci 0000:00:05.2: [8086:6f2a] type 00 class 0x088000 PCIe Root Complex Integrated Endpoint [ 0.568050] pci 0000:00:14.0: [8086:8c31] type 00 class 0x0c0330 conventional PCI endpoint [ 0.568297] pci 0000:00:14.0: BAR 0 [mem 0xfb600000-0xfb60ffff 64bit] [ 0.568763] pci 0000:00:14.0: PME# supported from D3hot D3cold [ 0.569057] pci 0000:00:16.0: [8086:8c3a] type 00 class 0x078000 conventional PCI endpoint [ 0.569304] pci 0000:00:16.0: BAR 0 [mem 0xfb617000-0xfb61700f 64bit] [ 0.569767] pci 0000:00:16.0: PME# supported from D0 D3hot D3cold [ 0.570015] pci 0000:00:16.1: [8086:8c3b] type 00 class 0x078000 conventional PCI endpoint [ 0.570262] pci 0000:00:16.1: BAR 0 [mem 0xfb616000-0xfb61600f 64bit] [ 0.570725] pci 0000:00:16.1: PME# supported from D0 D3hot D3cold [ 0.571068] pci 0000:00:1a.0: [8086:8c2d] type 00 class 0x0c0320 conventional PCI endpoint [ 0.571302] pci 0000:00:1a.0: BAR 0 [mem 0xfb614000-0xfb6143ff] [ 0.571839] pci 0000:00:1a.0: PME# supported from D0 D3hot D3cold [ 0.572166] pci 0000:00:1c.0: [8086:8c10] type 01 class 0x060400 PCIe Root Port [ 0.572474] pci 0000:00:1c.0: PCI bridge to [bus 07] [ 0.572612] pci 0000:00:1c.0: bridge window [io 0xe000-0xefff] [ 0.572741] pci 0000:00:1c.0: bridge window [mem 0xfb300000-0xfb3fffff] [ 0.573120] pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold [ 0.573322] pci 0000:00:1c.0: Enabling MPC IRBNCE [ 0.573444] pci 0000:00:1c.0: Intel PCH root port ACS workaround enabled [ 0.573745] pci 0000:00:1c.1: [8086:8c12] type 01 class 0x060400 PCIe Root Port [ 0.573988] pci 0000:00:1c.1: PCI bridge to [bus 08] [ 0.574118] pci 0000:00:1c.1: bridge window [io 0xd000-0xdfff] [ 0.574247] pci 0000:00:1c.1: bridge window [mem 0xfb200000-0xfb2fffff] [ 0.574672] pci 0000:00:1c.1: PME# supported from D0 D3hot D3cold [ 0.574869] pci 0000:00:1c.1: Enabling MPC IRBNCE [ 0.574992] pci 0000:00:1c.1: Intel PCH root port ACS workaround enabled [ 0.575305] pci 0000:00:1c.3: [8086:8c16] type 01 class 0x060400 PCIe Root Port [ 0.575613] pci 0000:00:1c.3: PCI bridge to [bus 09-0a] [ 0.575744] pci 0000:00:1c.3: bridge window [io 0xc000-0xcfff] [ 0.575834] pci 0000:00:1c.3: bridge window [mem 0xfa000000-0xfb0fffff] [ 0.576258] pci 0000:00:1c.3: PME# supported from D0 D3hot D3cold [ 0.576454] pci 0000:00:1c.3: Enabling MPC IRBNCE [ 0.576583] pci 0000:00:1c.3: Intel PCH root port ACS workaround enabled [ 0.576889] pci 0000:00:1c.4: [8086:8c18] type 01 class 0x060400 PCIe Root Port [ 0.577198] pci 0000:00:1c.4: PCI bridge to [bus 0b] [ 0.577328] pci 0000:00:1c.4: bridge window [io 0xb000-0xbfff] [ 0.577457] pci 0000:00:1c.4: bridge window [mem 0xfb100000-0xfb1fffff] [ 0.577883] pci 0000:00:1c.4: PME# supported from D0 D3hot D3cold [ 0.578086] pci 0000:00:1c.4: Enabling MPC IRBNCE [ 0.578209] pci 0000:00:1c.4: Intel PCH root port ACS workaround enabled [ 0.578541] pci 0000:00:1d.0: [8086:8c26] type 00 class 0x0c0320 conventional PCI endpoint [ 0.578767] pci 0000:00:1d.0: BAR 0 [mem 0xfb613000-0xfb6133ff] [ 0.579243] pci 0000:00:1d.0: PME# supported from D0 D3hot D3cold [ 0.579586] pci 0000:00:1f.0: [8086:8c54] type 00 class 0x060100 conventional PCI endpoint [ 0.580380] pci 0000:00:1f.2: [8086:8c02] type 00 class 0x010601 conventional PCI endpoint [ 0.580607] pci 0000:00:1f.2: BAR 0 [io 0xf070-0xf077] [ 0.580765] pci 0000:00:1f.2: BAR 1 [io 0xf060-0xf063] [ 0.580866] pci 0000:00:1f.2: BAR 2 [io 0xf050-0xf057] [ 0.581023] pci 0000:00:1f.2: BAR 3 [io 0xf040-0xf043] [ 0.581180] pci 0000:00:1f.2: BAR 4 [io 0xf020-0xf03f] [ 0.581337] pci 0000:00:1f.2: BAR 5 [mem 0xfb612000-0xfb6127ff] [ 0.581649] pci 0000:00:1f.2: PME# supported from D3hot [ 0.581941] pci 0000:00:1f.3: [8086:8c22] type 00 class 0x0c0500 conventional PCI endpoint [ 0.582188] pci 0000:00:1f.3: BAR 0 [mem 0xfb611000-0xfb6110ff 64bit] [ 0.582432] pci 0000:00:1f.3: BAR 4 [io 0xf000-0xf01f] [ 0.582814] pci 0000:00:1f.6: [8086:8c24] type 00 class 0x118000 conventional PCI endpoint [ 0.583060] pci 0000:00:1f.6: BAR 0 [mem 0xfb610000-0xfb610fff 64bit] [ 0.583813] pci 0000:00:01.0: PCI bridge to [bus 01] [ 0.584121] pci 0000:00:01.1: PCI bridge to [bus 02] [ 0.584473] pci 0000:03:00.0: [8086:6f50] type 00 class 0x088000 PCIe Endpoint [ 0.584712] pci 0000:03:00.0: BAR 0 [mem 0xfb506000-0xfb507fff 64bit] [ 0.585476] pci 0000:03:00.1: [8086:6f51] type 00 class 0x088000 PCIe Endpoint [ 0.585716] pci 0000:03:00.1: BAR 0 [mem 0xfb504000-0xfb505fff 64bit] [ 0.586424] pci 0000:03:00.2: [8086:6f52] type 00 class 0x088000 PCIe Endpoint [ 0.586668] pci 0000:03:00.2: BAR 0 [mem 0xfb502000-0xfb503fff 64bit] [ 0.587390] pci 0000:03:00.3: [8086:6f53] type 00 class 0x088000 PCIe Endpoint [ 0.587651] pci 0000:03:00.3: BAR 0 [mem 0xfb500000-0xfb501fff 64bit] [ 0.588358] pci 0000:00:02.0: PCI bridge to [bus 03] [ 0.588727] pci 0000:04:00.0: [8086:15ac] type 00 class 0x020000 PCIe Endpoint [ 0.588917] pci 0000:04:00.0: BAR 0 [mem 0xfbc00000-0xfbdfffff 64bit pref] [ 0.589180] pci 0000:04:00.0: BAR 4 [mem 0xfbe04000-0xfbe07fff 64bit pref] [ 0.589341] pci 0000:04:00.0: ROM [mem 0xfb480000-0xfb4fffff pref] [ 0.589692] pci 0000:04:00.0: PME# supported from D0 D3hot D3cold [ 0.589912] pci 0000:04:00.0: VF BAR 0 [mem 0x00000000-0x00003fff 64bit] [ 0.590034] pci 0000:04:00.0: VF BAR 0 [mem 0x00000000-0x000fffff 64bit]: contains BAR 0 for 64 VFs [ 0.590239] pci 0000:04:00.0: VF BAR 3 [mem 0x00000000-0x00003fff 64bit] [ 0.590360] pci 0000:04:00.0: VF BAR 3 [mem 0x00000000-0x000fffff 64bit]: contains BAR 3 for 64 VFs [ 0.590949] pci 0000:04:00.1: [8086:15ac] type 00 class 0x020000 PCIe Endpoint [ 0.591189] pci 0000:04:00.1: BAR 0 [mem 0xfba00000-0xfbbfffff 64bit pref] [ 0.591451] pci 0000:04:00.1: BAR 4 [mem 0xfbe00000-0xfbe03fff 64bit pref] [ 0.591623] pci 0000:04:00.1: ROM [mem 0xfb400000-0xfb47ffff pref] [ 0.591974] pci 0000:04:00.1: PME# supported from D0 D3hot D3cold [ 0.592177] pci 0000:04:00.1: VF BAR 0 [mem 0x00000000-0x00003fff 64bit] [ 0.592298] pci 0000:04:00.1: VF BAR 0 [mem 0x00000000-0x000fffff 64bit]: contains BAR 0 for 64 VFs [ 0.592499] pci 0000:04:00.1: VF BAR 3 [mem 0x00000000-0x00003fff 64bit] [ 0.592823] pci 0000:04:00.1: VF BAR 3 [mem 0x00000000-0x000fffff 64bit]: contains BAR 3 for 64 VFs [ 0.593388] pci 0000:00:02.2: PCI bridge to [bus 04] [ 0.593693] pci 0000:00:03.0: PCI bridge to [bus 05] [ 0.593996] pci 0000:00:03.2: PCI bridge to [bus 06] [ 0.594373] pci 0000:07:00.0: working around ROM BAR overlap defect [ 0.594493] pci 0000:07:00.0: [8086:1533] type 00 class 0x020000 PCIe Endpoint [ 0.594732] pci 0000:07:00.0: BAR 0 [mem 0xfb300000-0xfb37ffff] [ 0.594920] pci 0000:07:00.0: BAR 2 [io 0xe000-0xe01f] [ 0.595085] pci 0000:07:00.0: BAR 3 [mem 0xfb380000-0xfb383fff] [ 0.595625] pci 0000:07:00.0: PME# supported from D0 D3hot D3cold [ 0.596101] pci 0000:00:1c.0: PCI bridge to [bus 07] [ 0.596485] pci 0000:08:00.0: working around ROM BAR overlap defect [ 0.596605] pci 0000:08:00.0: [8086:1533] type 00 class 0x020000 PCIe Endpoint [ 0.596840] pci 0000:08:00.0: BAR 0 [mem 0xfb200000-0xfb27ffff] [ 0.597056] pci 0000:08:00.0: BAR 2 [io 0xd000-0xd01f] [ 0.597221] pci 0000:08:00.0: BAR 3 [mem 0xfb280000-0xfb283fff] [ 0.597760] pci 0000:08:00.0: PME# supported from D0 D3hot D3cold [ 0.598172] pci 0000:00:1c.1: PCI bridge to [bus 08] [ 0.598540] pci 0000:09:00.0: [1a03:1150] type 01 class 0x060400 PCIe to PCI/PCI-X bridge [ 0.598870] pci 0000:09:00.0: PCI bridge to [bus 0a] [ 0.599014] pci 0000:09:00.0: bridge window [io 0xc000-0xcfff] [ 0.599144] pci 0000:09:00.0: bridge window [mem 0xfa000000-0xfb0fffff] [ 0.599384] pci 0000:09:00.0: enabling Extended Tags [ 0.599725] pci 0000:09:00.0: supports D1 D2 [ 0.599823] pci 0000:09:00.0: PME# supported from D0 D1 D2 D3hot D3cold [ 0.600204] pci 0000:00:1c.3: PCI bridge to [bus 09-0a] [ 0.600522] pci_bus 0000:0a: extended config space not accessible [ 0.600695] pci 0000:0a:00.0: [1a03:2000] type 00 class 0x030000 conventional PCI endpoint [ 0.600910] pci 0000:0a:00.0: BAR 0 [mem 0xfa000000-0xfaffffff] [ 0.601078] pci 0000:0a:00.0: BAR 1 [mem 0xfb000000-0xfb01ffff] [ 0.601244] pci 0000:0a:00.0: BAR 2 [io 0xc000-0xc07f] [ 0.601602] pci 0000:0a:00.0: Video device with shadowed ROM at [mem 0x000c0000-0x000dffff] [ 0.601892] pci 0000:0a:00.0: supports D1 D2 [ 0.602005] pci 0000:0a:00.0: PME# supported from D0 D1 D2 D3hot D3cold [ 0.602450] pci 0000:09:00.0: PCI bridge to [bus 0a] [ 0.602896] pci 0000:0b:00.0: [8086:1521] type 00 class 0x020000 PCIe Endpoint [ 0.603123] pci 0000:0b:00.0: BAR 0 [mem 0xfb160000-0xfb17ffff] [ 0.603332] pci 0000:0b:00.0: BAR 2 [io 0xb060-0xb07f] [ 0.603493] pci 0000:0b:00.0: BAR 3 [mem 0xfb18c000-0xfb18ffff] [ 0.604014] pci 0000:0b:00.0: PME# supported from D0 D3hot D3cold [ 0.604260] pci 0000:0b:00.0: VF BAR 0 [mem 0x00000000-0x00003fff 64bit pref] [ 0.604384] pci 0000:0b:00.0: VF BAR 0 [mem 0x00000000-0x0001ffff 64bit pref]: contains BAR 0 for 8 VFs [ 0.604600] pci 0000:0b:00.0: VF BAR 3 [mem 0x00000000-0x00003fff 64bit pref] [ 0.604722] pci 0000:0b:00.0: VF BAR 3 [mem 0x00000000-0x0001ffff 64bit pref]: contains BAR 3 for 8 VFs [ 0.605241] pci 0000:0b:00.1: [8086:1521] type 00 class 0x020000 PCIe Endpoint [ 0.605471] pci 0000:0b:00.1: BAR 0 [mem 0xfb140000-0xfb15ffff] [ 0.605686] pci 0000:0b:00.1: BAR 2 [io 0xb040-0xb05f] [ 0.605851] pci 0000:0b:00.1: BAR 3 [mem 0xfb188000-0xfb18bfff] [ 0.606368] pci 0000:0b:00.1: PME# supported from D0 D3hot D3cold [ 0.606598] pci 0000:0b:00.1: VF BAR 0 [mem 0x00000000-0x00003fff 64bit pref] [ 0.606721] pci 0000:0b:00.1: VF BAR 0 [mem 0x00000000-0x0001ffff 64bit pref]: contains BAR 0 for 8 VFs [ 0.606892] pci 0000:0b:00.1: VF BAR 3 [mem 0x00000000-0x00003fff 64bit pref] [ 0.607015] pci 0000:0b:00.1: VF BAR 3 [mem 0x00000000-0x0001ffff 64bit pref]: contains BAR 3 for 8 VFs [ 0.607546] pci 0000:0b:00.2: [8086:1521] type 00 class 0x020000 PCIe Endpoint [ 0.607774] pci 0000:0b:00.2: BAR 0 [mem 0xfb120000-0xfb13ffff] [ 0.607914] pci 0000:0b:00.2: BAR 2 [io 0xb020-0xb03f] [ 0.608075] pci 0000:0b:00.2: BAR 3 [mem 0xfb184000-0xfb187fff] [ 0.608598] pci 0000:0b:00.2: PME# supported from D0 D3hot D3cold [ 0.608831] pci 0000:0b:00.2: VF BAR 0 [mem 0x00000000-0x00003fff 64bit pref] [ 0.608954] pci 0000:0b:00.2: VF BAR 0 [mem 0x00000000-0x0001ffff 64bit pref]: contains BAR 0 for 8 VFs [ 0.609169] pci 0000:0b:00.2: VF BAR 3 [mem 0x00000000-0x00003fff 64bit pref] [ 0.609292] pci 0000:0b:00.2: VF BAR 3 [mem 0x00000000-0x0001ffff 64bit pref]: contains BAR 3 for 8 VFs [ 0.609845] pci 0000:0b:00.3: [8086:1521] type 00 class 0x020000 PCIe Endpoint [ 0.610073] pci 0000:0b:00.3: BAR 0 [mem 0xfb100000-0xfb11ffff] [ 0.610282] pci 0000:0b:00.3: BAR 2 [io 0xb000-0xb01f] [ 0.610443] pci 0000:0b:00.3: BAR 3 [mem 0xfb180000-0xfb183fff] [ 0.610967] pci 0000:0b:00.3: PME# supported from D0 D3hot D3cold [ 0.611196] pci 0000:0b:00.3: VF BAR 0 [mem 0x00000000-0x00003fff 64bit pref] [ 0.611320] pci 0000:0b:00.3: VF BAR 0 [mem 0x00000000-0x0001ffff 64bit pref]: contains BAR 0 for 8 VFs [ 0.611535] pci 0000:0b:00.3: VF BAR 3 [mem 0x00000000-0x00003fff 64bit pref] [ 0.611657] pci 0000:0b:00.3: VF BAR 3 [mem 0x00000000-0x0001ffff 64bit pref]: contains BAR 3 for 8 VFs [ 0.612244] pci 0000:00:1c.4: PCI bridge to [bus 0b] [ 0.612406] pci 0000:00:1c.4: bridge has subordinate 0b but max busn 0c [ 0.612946] pci_bus 0000:00: on NUMA node 0 [ 0.613045] xen: registering gsi 13 triggering 1 polarity 0 [ 0.614022] ACPI: PCI: Interrupt link LNKA configured for IRQ 11 [ 0.614216] ACPI: PCI: Interrupt link LNKB configured for IRQ 10 [ 0.614405] ACPI: PCI: Interrupt link LNKC configured for IRQ 5 [ 0.614593] ACPI: PCI: Interrupt link LNKD configured for IRQ 11 [ 0.614782] ACPI: PCI: Interrupt link LNKE configured for IRQ 0 [ 0.614823] ACPI: PCI: Interrupt link LNKE disabled [ 0.615014] ACPI: PCI: Interrupt link LNKF configured for IRQ 0 [ 0.615137] ACPI: PCI: Interrupt link LNKF disabled [ 0.615320] ACPI: PCI: Interrupt link LNKG configured for IRQ 0 [ 0.615438] ACPI: PCI: Interrupt link LNKG disabled [ 0.615621] ACPI: PCI: Interrupt link LNKH configured for IRQ 0 [ 0.615739] ACPI: PCI: Interrupt link LNKH disabled [ 0.615978] xen:balloon: Initialising balloon driver [ 0.616115] iommu: Default domain type: Translated [ 0.616115] iommu: DMA domain TLB invalidation policy: lazy mode [ 0.616241] SCSI subsystem initialized [ 0.616837] libata version 3.00 loaded. [ 0.616864] ACPI: bus type USB registered [ 0.616990] usbcore: registered new interface driver usbfs [ 0.617112] usbcore: registered new interface driver hub [ 0.617234] usbcore: registered new device driver usb [ 0.617363] pps_core: LinuxPPS API ver. 1 registered [ 0.617478] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti [ 0.617629] PTP clock support registered [ 0.617863] Advanced Linux Sound Architecture Driver Initialized. [ 0.618199] NetLabel: Initializing [ 0.618312] NetLabel: domain hash size = 128 [ 0.618425] NetLabel: protocols = UNLABELED CIPSOv4 CALIPSO [ 0.618559] NetLabel: unlabeled traffic allowed by default [ 0.618846] PCI: Using ACPI for IRQ routing [ 0.655260] PCI: pci_cache_line_size set to 64 bytes [ 0.656041] e820: reserve RAM buffer [mem 0x0009a000-0x0009ffff] [ 0.656044] e820: reserve RAM buffer [mem 0x20066000-0x23ffffff] [ 0.656070] pci 0000:0a:00.0: vgaarb: setting as boot VGA device [ 0.656070] pci 0000:0a:00.0: vgaarb: bridge control possible [ 0.656113] pci 0000:0a:00.0: vgaarb: VGA device added: decodes=io+mem,owns=io+mem,locks=none [ 0.656262] vgaarb: loaded [ 0.656984] clocksource: Switched to clocksource tsc-early [ 0.657477] VFS: Disk quotas dquot_6.6.0 [ 0.657596] VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes) [ 0.657778] hugetlbfs: disabling because there are no supported hugepage sizes [ 0.657802] pnp: PnP ACPI init [ 0.658241] xen: registering gsi 8 triggering 1 polarity 0 [ 0.658399] system 00:01: [io 0x0500-0x057f] has been reserved [ 0.658523] system 00:01: [io 0x0400-0x047f] has been reserved [ 0.658642] system 00:01: [io 0x0580-0x059f] has been reserved [ 0.658761] system 00:01: [io 0x0600-0x061f] has been reserved [ 0.658900] system 00:01: [io 0x0880-0x0883] has been reserved [ 0.659035] system 00:01: [io 0x0800-0x081f] has been reserved [ 0.659155] system 00:01: [mem 0xfed1c000-0xfed3ffff] could not be reserved [ 0.659276] system 00:01: [mem 0xfed45000-0xfed8bfff] has been reserved [ 0.659397] system 00:01: [mem 0xff000000-0xffffffff] has been reserved [ 0.659517] system 00:01: [mem 0xfee00000-0xfeefffff] has been reserved [ 0.659637] system 00:01: [mem 0xfed12000-0xfed1200f] has been reserved [ 0.659757] system 00:01: [mem 0xfed12010-0xfed1201f] has been reserved [ 0.659901] system 00:01: [mem 0xfed1b000-0xfed1bfff] has been reserved [ 0.660314] system 00:02: [io 0x0a00-0x0a0f] has been reserved [ 0.660437] system 00:02: [io 0x0a10-0x0a1f] has been reserved [ 0.660555] system 00:02: [io 0x0a20-0x0a2f] has been reserved [ 0.660674] system 00:02: [io 0x0a30-0x0a3f] has been reserved [ 0.660793] system 00:02: [io 0x0a40-0x0a4f] has been reserved [ 0.661228] xen: registering gsi 4 triggering 1 polarity 0 [ 0.661233] Already setup the GSI :4 [ 0.661346] pnp 00:03: [dma 0 disabled] [ 0.661658] xen: registering gsi 3 triggering 1 polarity 0 [ 0.661668] pnp 00:04: [dma 0 disabled] [ 0.662215] pnp: PnP ACPI: found 5 devices [ 0.693972] PM-Timer failed consistency check (0xffffff) - aborting. [ 0.694160] NET: Registered PF_INET protocol family [ 0.694314] IP idents hash table entries: 8192 (order: 4, 65536 bytes, linear) [ 0.694666] tcp_listen_portaddr_hash hash table entries: 256 (order: 0, 4096 bytes, linear) [ 0.694818] Table-perturb hash table entries: 65536 (order: 6, 262144 bytes, linear) [ 0.695034] TCP established hash table entries: 4096 (order: 3, 32768 bytes, linear) [ 0.695195] TCP bind hash table entries: 4096 (order: 5, 131072 bytes, linear) [ 0.695366] TCP: Hash tables configured (established 4096 bind 4096) [ 0.695518] UDP hash table entries: 256 (order: 1, 8192 bytes, linear) [ 0.695641] UDP-Lite hash table entries: 256 (order: 1, 8192 bytes, linear) [ 0.695797] NET: Registered PF_UNIX/PF_LOCAL protocol family [ 0.696170] RPC: Registered named UNIX socket transport module. [ 0.696299] RPC: Registered udp transport module. [ 0.696413] RPC: Registered tcp transport module. [ 0.696527] RPC: Registered tcp-with-tls transport module. [ 0.696642] RPC: Registered tcp NFSv4.1 backchannel transport module. [ 0.697243] pci 0000:00:1c.4: bridge window [mem 0x00100000-0x000fffff 64bit pref] to [bus 0b] add_size 100000 add_align 100000 [ 0.697417] pci 0000:00:1c.4: bridge window [mem 0x90000000-0x900fffff 64bit pref]: assigned [ 0.697567] pci 0000:00:01.0: PCI bridge to [bus 01] [ 0.697748] pci 0000:00:01.1: PCI bridge to [bus 02] [ 0.697941] pci 0000:00:02.0: PCI bridge to [bus 03] [ 0.699176] pci 0000:00:02.0: bridge window [mem 0xfb500000-0xfb5fffff] [ 0.699341] pci 0000:04:00.0: VF BAR 0 [mem size 0x00100000 64bit]: can't assign; no space [ 0.699489] pci 0000:04:00.0: VF BAR 0 [mem size 0x00100000 64bit]: failed to assign [ 0.699635] pci 0000:04:00.0: VF BAR 3 [mem size 0x00100000 64bit]: can't assign; no space [ 0.699782] pci 0000:04:00.0: VF BAR 3 [mem size 0x00100000 64bit]: failed to assign [ 0.699949] pci 0000:04:00.1: VF BAR 0 [mem size 0x00100000 64bit]: can't assign; no space [ 0.700098] pci 0000:04:00.1: VF BAR 0 [mem size 0x00100000 64bit]: failed to assign [ 0.700245] pci 0000:04:00.1: VF BAR 3 [mem size 0x00100000 64bit]: can't assign; no space [ 0.700391] pci 0000:04:00.1: VF BAR 3 [mem size 0x00100000 64bit]: failed to assign [ 0.700542] pci 0000:04:00.0: VF BAR 0 [mem size 0x00100000 64bit]: can't assign; no space [ 0.700689] pci 0000:04:00.0: VF BAR 0 [mem size 0x00100000 64bit]: failed to assign [ 0.700846] pci 0000:04:00.0: VF BAR 3 [mem size 0x00100000 64bit]: can't assign; no space [ 0.701008] pci 0000:04:00.0: VF BAR 3 [mem size 0x00100000 64bit]: failed to assign [ 0.701157] pci 0000:04:00.1: VF BAR 0 [mem size 0x00100000 64bit]: can't assign; no space [ 0.701303] pci 0000:04:00.1: VF BAR 0 [mem size 0x00100000 64bit]: failed to assign [ 0.701449] pci 0000:04:00.1: VF BAR 3 [mem size 0x00100000 64bit]: can't assign; no space [ 0.701595] pci 0000:04:00.1: VF BAR 3 [mem size 0x00100000 64bit]: failed to assign [ 0.701741] pci 0000:00:02.2: PCI bridge to [bus 04] [ 0.701912] pci 0000:00:02.2: bridge window [mem 0xfb400000-0xfb4fffff] [ 0.702049] pci 0000:00:02.2: bridge window [mem 0xfba00000-0xfbefffff 64bit pref] [ 0.702221] pci 0000:00:03.0: PCI bridge to [bus 05] [ 0.702395] pci 0000:00:03.2: PCI bridge to [bus 06] [ 0.702569] pci 0000:00:1c.0: PCI bridge to [bus 07] [ 0.702689] pci 0000:00:1c.0: bridge window [io 0xe000-0xefff] [ 0.702845] pci 0000:00:1c.0: bridge window [mem 0xfb300000-0xfb3fffff] [ 0.703021] pci 0000:00:1c.1: PCI bridge to [bus 08] [ 0.703144] pci 0000:00:1c.1: bridge window [io 0xd000-0xdfff] [ 0.703291] pci 0000:00:1c.1: bridge window [mem 0xfb200000-0xfb2fffff] [ 0.703453] pci 0000:09:00.0: PCI bridge to [bus 0a] [ 0.703574] pci 0000:09:00.0: bridge window [io 0xc000-0xcfff] [ 0.703716] pci 0000:09:00.0: bridge window [mem 0xfa000000-0xfb0fffff] [ 0.703907] pci 0000:00:1c.3: PCI bridge to [bus 09-0a] [ 0.704037] pci 0000:00:1c.3: bridge window [io 0xc000-0xcfff] [ 0.704177] pci 0000:00:1c.3: bridge window [mem 0xfa000000-0xfb0fffff] [ 0.704342] pci 0000:0b:00.0: VF BAR 0 [mem 0x90000000-0x9001ffff 64bit pref]: assigned [ 0.704499] pci 0000:0b:00.0: VF BAR 3 [mem 0x90020000-0x9003ffff 64bit pref]: assigned [ 0.704658] pci 0000:0b:00.1: VF BAR 0 [mem 0x90040000-0x9005ffff 64bit pref]: assigned [ 0.704812] pci 0000:0b:00.1: VF BAR 3 [mem 0x90060000-0x9007ffff 64bit pref]: assigned [ 0.704983] pci 0000:0b:00.2: VF BAR 0 [mem 0x90080000-0x9009ffff 64bit pref]: assigned [ 0.705137] pci 0000:0b:00.2: VF BAR 3 [mem 0x900a0000-0x900bffff 64bit pref]: assigned [ 0.705290] pci 0000:0b:00.3: VF BAR 0 [mem 0x900c0000-0x900dffff 64bit pref]: assigned [ 0.705444] pci 0000:0b:00.3: VF BAR 3 [mem 0x900e0000-0x900fffff 64bit pref]: assigned [ 0.705598] pci 0000:00:1c.4: PCI bridge to [bus 0b] [ 0.705718] pci 0000:00:1c.4: bridge window [io 0xb000-0xbfff] [ 0.705872] pci 0000:00:1c.4: bridge window [mem 0xfb100000-0xfb1fffff] [ 0.706028] pci 0000:00:1c.4: bridge window [mem 0x90000000-0x900fffff 64bit pref] [ 0.706202] pci_bus 0000:00: Some PCI device resources are unassigned, try booting with pci=realloc [ 0.706352] pci_bus 0000:00: resource 4 [io 0x0000-0x0cf7 window] [ 0.706472] pci_bus 0000:00: resource 5 [io 0x1000-0xffff window] [ 0.706591] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff window] [ 0.706712] pci_bus 0000:00: resource 7 [mem 0x90000000-0xfbffbfff window] [ 0.706847] pci_bus 0000:03: resource 1 [mem 0xfb500000-0xfb5fffff] [ 0.706983] pci_bus 0000:04: resource 1 [mem 0xfb400000-0xfb4fffff] [ 0.707104] pci_bus 0000:04: resource 2 [mem 0xfba00000-0xfbefffff 64bit pref] [ 0.707254] pci_bus 0000:07: resource 0 [io 0xe000-0xefff] [ 0.707373] pci_bus 0000:07: resource 1 [mem 0xfb300000-0xfb3fffff] [ 0.707517] pci_bus 0000:08: resource 0 [io 0xd000-0xdfff] [ 0.707633] pci_bus 0000:08: resource 1 [mem 0xfb200000-0xfb2fffff] [ 0.707755] pci_bus 0000:09: resource 0 [io 0xc000-0xcfff] [ 0.707894] pci_bus 0000:09: resource 1 [mem 0xfa000000-0xfb0fffff] [ 0.708024] pci_bus 0000:0a: resource 0 [io 0xc000-0xcfff] [ 0.708141] pci_bus 0000:0a: resource 1 [mem 0xfa000000-0xfb0fffff] [ 0.708260] pci_bus 0000:0b: resource 0 [io 0xb000-0xbfff] [ 0.708377] pci_bus 0000:0b: resource 1 [mem 0xfb100000-0xfb1fffff] [ 0.708496] pci_bus 0000:0b: resource 2 [mem 0x90000000-0x900fffff 64bit pref] [ 0.709052] pci 0000:00:05.0: disabled boot interrupts on device [8086:6f28] [ 0.709265] xen: registering gsi 19 triggering 0 polarity 1 [ 0.709296] xen: --> pirq=19 -> irq=19 (gsi=19) [ 0.718117] xen: registering gsi 18 triggering 0 polarity 1 [ 0.718140] xen: --> pirq=18 -> irq=18 (gsi=18) [ 0.734235] pci 0000:00:1a.0: quirk_usb_early_handoff+0x0/0x7c0 took 15788 usecs [ 0.734479] xen: registering gsi 18 triggering 0 polarity 1 [ 0.734485] Already setup the GSI :18 [ 0.751073] pci 0000:00:1d.0: quirk_usb_early_handoff+0x0/0x7c0 took 16255 usecs [ 0.751287] pci 0000:04:00.0: CLS mismatch (64 != 32), using 64 bytes [ 0.751462] PCI-DMA: Using software bounce buffering for IO (SWIOTLB) [ 0.751543] Unpacking initramfs... [ 0.751588] software IO TLB: mapped [mem 0x000000001b180000-0x000000001f180000] (64MB) [ 0.751945] kvm_intel: VMX not supported by CPU 2 [ 0.752062] kvm_amd: CPU 2 isn't AMD or Hygon [ 0.752178] clocksource: tsc: mask: 0xffffffffffffffff max_cycles: 0x1fb63109b96, max_idle_ns: 440795265316 ns [ 0.752434] clocksource: Switched to clocksource tsc [ 0.758130] Initialise system trusted keyrings [ 0.758436] workingset: timestamp_bits=62 max_order=17 bucket_order=0 [ 0.758764] NFS: Registering the id_resolver key type [ 0.758887] Key type id_resolver registered [ 0.758999] Key type id_legacy registered [ 0.759196] 9p: Installing v9fs 9p2000 file system support [ 0.776898] Key type asymmetric registered [ 0.777025] Asymmetric key parser 'x509' registered [ 0.777164] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 251) [ 0.777320] io scheduler mq-deadline registered [ 0.777435] io scheduler kyber registered [ 0.778185] xen: registering gsi 16 triggering 0 polarity 1 [ 0.778219] xen: --> pirq=16 -> irq=16 (gsi=16) [ 0.778593] xen: registering gsi 16 triggering 0 polarity 1 [ 0.778598] Already setup the GSI :16 [ 0.779072] xen: registering gsi 16 triggering 0 polarity 1 [ 0.779078] Already setup the GSI :16 [ 0.779397] xen: registering gsi 16 triggering 0 polarity 1 [ 0.779401] Already setup the GSI :16 [ 0.779733] xen: registering gsi 16 triggering 0 polarity 1 [ 0.779737] Already setup the GSI :16 [ 0.780189] xen: registering gsi 16 triggering 0 polarity 1 [ 0.780194] Already setup the GSI :16 [ 0.780660] xen: registering gsi 16 triggering 0 polarity 1 [ 0.780665] Already setup the GSI :16 [ 0.781135] xen: registering gsi 17 triggering 0 polarity 1 [ 0.781154] xen: --> pirq=17 -> irq=17 (gsi=17) [ 0.781491] xen: registering gsi 19 triggering 0 polarity 1 [ 0.781496] Already setup the GSI :19 [ 0.782008] xen: registering gsi 16 triggering 0 polarity 1 [ 0.782013] Already setup the GSI :16 [ 0.782700] input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input0 [ 0.782879] ACPI: button: Power Button [PWRB] [ 0.783026] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input1 [ 0.783284] ACPI: button: Power Button [PWRF] [ 0.783541] Monitor-Mwait will be used to enter C-1 state [ 0.783577] Monitor-Mwait will be used to enter C-2 state [ 0.783592] ACPI: \_SB_.SCK0.CP00: Found 2 idle states [ 0.784201] ACPI: \_SB_.SCK0.CP01: Found 2 idle states [ 0.784604] ACPI: \_SB_.SCK0.CP02: Found 2 idle states [ 0.784971] ACPI: \_SB_.SCK0.CP03: Found 2 idle states [ 0.785323] ACPI: \_SB_.SCK0.CP04: Found 2 idle states [ 0.785846] ACPI: \_SB_.SCK0.CP05: Found 2 idle states [ 0.786303] ACPI: \_SB_.SCK0.CP06: Found 2 idle states [ 0.786790] ACPI: \_SB_.SCK0.CP07: Found 2 idle states [ 0.787632] xen:xen_evtchn: Event-channel device installed [ 0.787868] xen_pciback: backend is vpci [ 0.788633] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled [ 0.789035] 00:04: ttyS1 at I/O 0x2f8 (irq = 3, base_baud = 115200) is a 16550A [ 0.789847] hpet_acpi_add: no address or irqs in _CRS [ 0.790063] Non-volatile memory driver v1.3 [ 0.792452] loop: module loaded [ 0.798474] mei_me 0000:00:16.0: Device doesn't have valid ME Interface [ 0.798522] ahci 0000:00:1f.2: version 3.0 [ 0.798758] xen: registering gsi 16 triggering 0 polarity 1 [ 0.798768] Already setup the GSI :16 [ 0.799110] ahci 0000:00:1f.2: AHCI vers 0001.0300, 32 command slots, 6 Gbps, SATA mode [ 0.799261] ahci 0000:00:1f.2: 6/6 ports implemented (port mask 0x3f) [ 0.799381] ahci 0000:00:1f.2: flags: 64bit ncq led clo pio ems apst [ 0.815355] scsi host0: ahci [ 0.815697] scsi host1: ahci [ 0.816005] scsi host2: ahci [ 0.816309] scsi host3: ahci [ 0.816607] scsi host4: ahci [ 0.816991] scsi host5: ahci [ 0.817141] ata1: SATA max UDMA/133 abar m2048@0xfb612000 port 0xfb612100 irq 83 lpm-pol 0 [ 0.817290] ata2: SATA max UDMA/133 abar m2048@0xfb612000 port 0xfb612180 irq 83 lpm-pol 0 [ 0.817437] ata3: SATA max UDMA/133 abar m2048@0xfb612000 port 0xfb612200 irq 83 lpm-pol 0 [ 0.817584] ata4: SATA max UDMA/133 abar m2048@0xfb612000 port 0xfb612280 irq 83 lpm-pol 0 [ 0.817745] ata5: SATA max UDMA/133 abar m2048@0xfb612000 port 0xfb612300 irq 83 lpm-pol 0 [ 0.817892] ata6: SATA max UDMA/133 abar m2048@0xfb612000 port 0xfb612380 irq 83 lpm-pol 0 [ 0.818367] tun: Universal TUN/TAP device driver, 1.6 [ 0.818665] e100: Intel(R) PRO/100 Network Driver [ 0.818785] e100: Copyright(c) 1999-2006 Intel Corporation [ 0.818922] sky2: driver version 1.30 [ 0.820208] xen_netfront: Initialising Xen virtual ethernet driver [ 0.820772] xen: registering gsi 18 triggering 0 polarity 1 [ 0.820784] Already setup the GSI :18 [ 0.820857] xen: registering gsi 19 triggering 0 polarity 1 [ 0.820893] xen: registering gsi 18 triggering 0 polarity 1 [ 0.820904] Already setup the GSI :18 [ 0.821048] Already setup the GSI :19 [ 0.821171] ehci-pci 0000:00:1a.0: EHCI Host Controller [ 0.821427] ehci-pci 0000:00:1a.0: new USB bus registered, assigned bus number 1 [ 0.821605] ehci-pci 0000:00:1a.0: debug port 2 [ 0.825740] ehci-pci 0000:00:1a.0: irq 18, io mem 0xfb614000 [ 0.832697] ehci-pci 0000:00:1a.0: USB 2.0 started, EHCI 1.00 [ 0.833130] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 6.10 [ 0.833287] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 0.833454] usb usb1: Product: EHCI Host Controller [ 0.833569] usb usb1: Manufacturer: Linux 6.10.0-rc3+ ehci_hcd [ 0.833703] usb usb1: SerialNumber: 0000:00:1a.0 [ 0.834038] hub 1-0:1.0: USB hub found [ 0.834187] hub 1-0:1.0: 2 ports detected [ 0.834541] xhci_hcd 0000:00:14.0: xHCI Host Controller [ 0.834817] xhci_hcd 0000:00:14.0: new USB bus registered, assigned bus number 2 [ 0.836046] xhci_hcd 0000:00:14.0: hcc params 0x200077c1 hci version 0x100 quirks 0x0000000000009810 [ 0.836556] xhci_hcd 0000:00:14.0: xHCI Host Controller [ 0.836597] ehci-pci 0000:00:1d.0: EHCI Host Controller [ 0.836767] xhci_hcd 0000:00:14.0: new USB bus registered, assigned bus number 3 [ 0.836909] ehci-pci 0000:00:1d.0: new USB bus registered, assigned bus number 4 [ 0.836954] xhci_hcd 0000:00:14.0: Host supports USB 3.0 SuperSpeed [ 0.836997] ehci-pci 0000:00:1d.0: debug port 2 [ 0.837307] usb usb2: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 6.10 [ 0.837486] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 0.837679] usb usb2: Product: xHCI Host Controller [ 0.837798] usb usb2: Manufacturer: Linux 6.10.0-rc3+ xhci-hcd [ 0.837919] usb usb2: SerialNumber: 0000:00:14.0 [ 0.838304] hub 2-0:1.0: USB hub found [ 0.838467] hub 2-0:1.0: 8 ports detected [ 0.840219] usb usb3: New USB device found, idVendor=1d6b, idProduct=0003, bcdDevice= 6.10 [ 0.840390] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 0.840537] usb usb3: Product: xHCI Host Controller [ 0.840674] usb usb3: Manufacturer: Linux 6.10.0-rc3+ xhci-hcd [ 0.840795] usb usb3: SerialNumber: 0000:00:14.0 [ 0.841144] hub 3-0:1.0: USB hub found [ 0.841292] hub 3-0:1.0: 6 ports detected [ 0.841301] ehci-pci 0000:00:1d.0: irq 18, io mem 0xfb613000 [ 0.842547] usbcore: registered new interface driver usblp [ 0.842699] usbcore: registered new interface driver usb-storage [ 0.842849] i8042: PNP: No PS/2 controller found. [ 0.843174] rtc_cmos 00:00: RTC can wake from S4 [ 0.843824] rtc_cmos 00:00: registered as rtc0 [ 0.843983] rtc_cmos 00:00: alarms up to one month, y3k, 114 bytes nvram [ 0.844170] device-mapper: uevent: version 1.0.3 [ 0.844299] xen: registering gsi 18 triggering 0 polarity 1 [ 0.844310] Already setup the GSI :18 [ 0.844374] device-mapper: ioctl: 4.48.0-ioctl (2023-03-01) initialised: dm-devel@lists.linux.dev [ 0.844474] i801_smbus 0000:00:1f.3: SPD Write Disable is set [ 0.844588] intel_pstate: CPU model not supported [ 0.844607] i801_smbus 0000:00:1f.3: SMBus using PCI interrupt [ 0.844745] hid: raw HID events driver (C) Jiri Kosina [ 0.845214] usbcore: registered new interface driver usbhid [ 0.845334] usbhid: USB HID core driver [ 0.845950] Initializing XFRM netlink socket [ 0.846108] NET: Registered PF_INET6 protocol family [ 0.846544] Segment Routing with IPv6 [ 0.846685] In-situ OAM (IOAM) with IPv6 [ 0.846831] sit: IPv6, IPv4 and MPLS over IPv4 tunneling driver [ 0.847081] NET: Registered PF_PACKET protocol family [ 0.847221] 9pnet: Installing 9P2000 support [ 0.847355] Key type dns_resolver registered [ 0.847679] ehci-pci 0000:00:1d.0: USB 2.0 started, EHCI 1.00 [ 0.848102] usb usb4: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 6.10 [ 0.848256] usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 0.848401] usb usb4: Product: EHCI Host Controller [ 0.848515] usb usb4: Manufacturer: Linux 6.10.0-rc3+ ehci_hcd [ 0.848639] usb usb4: SerialNumber: 0000:00:1d.0 [ 0.848919] IPI shorthand broadcast: enabled [ 0.848981] hub 4-0:1.0: USB hub found [ 0.849187] hub 4-0:1.0: 2 ports detected [ 0.852037] sched_clock: Marking stable (811005284, 40610024)->(1736203030, -884587722) [ 0.852642] Timer migration: 1 hierarchy levels; 8 children per group; 1 crossnode level [ 0.853306] registered taskstats version 1 [ 0.853421] Loading compiled-in X.509 certificates [ 0.855051] PM: Magic number: 12:685:451 [ 0.855287] printk: legacy console [netcon0] enabled [ 0.855405] netconsole: network logging started [ 0.855825] cfg80211: Loading compiled-in X.509 certificates for regulatory database [ 0.865260] Freeing initrd memory: 20120K [ 0.877195] Loaded X.509 cert 'sforshee: 00b28ddf47aef9cea7' [ 0.877536] Loaded X.509 cert 'wens: 61c038651aabdcf94bd0ac7ff06c7248db18c600' [ 0.877712] ALSA device list: [ 0.877854] No soundcards found. [ 0.878533] cfg80211: loaded regulatory.db is malformed or signature is missing/invalid [ 1.076798] usb 2-3: new high-speed USB device number 2 using xhci_hcd [ 1.076947] usb 1-1: new high-speed USB device number 2 using ehci-pci [ 1.092841] usb 4-1: new high-speed USB device number 2 using ehci-pci [ 1.129724] ata6: SATA link down (SStatus 0 SControl 300) [ 1.129895] ata3: SATA link up 6.0 Gbps (SStatus 133 SControl 300) [ 1.130057] ata4: SATA link down (SStatus 0 SControl 300) [ 1.130204] ata2: SATA link down (SStatus 0 SControl 300) [ 1.130363] ata1: SATA link down (SStatus 0 SControl 300) [ 1.130506] ata5: SATA link down (SStatus 0 SControl 300) [ 1.131229] ata3.00: ATA-10: HGST HUS722T1TALA604, RAGNWA05, max UDMA/133 [ 1.204293] usb 2-3: New USB device found, idVendor=05e3, idProduct=0610, bcdDevice=32.98 [ 1.204450] usb 2-3: New USB device strings: Mfr=0, Product=1, SerialNumber=0 [ 1.204575] usb 2-3: Product: USB2.0 Hub [ 1.205179] usb 1-1: New USB device found, idVendor=8087, idProduct=8008, bcdDevice= 0.05 [ 1.205332] usb 1-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0 [ 1.205568] hub 2-3:1.0: USB hub found [ 1.205846] hub 1-1:1.0: USB hub found [ 1.206017] hub 2-3:1.0: 4 ports detected [ 1.206156] hub 1-1:1.0: 4 ports detected [ 1.220376] ata3.00: 1953525168 sectors, multi 16: LBA48 NCQ (depth 32), AA [ 1.220506] ata3.00: Features: NCQ-sndrcv NCQ-prio [ 1.221052] usb 4-1: New USB device found, idVendor=8087, idProduct=8000, bcdDevice= 0.05 [ 1.221209] usb 4-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0 [ 1.221636] hub 4-1:1.0: USB hub found [ 1.221980] hub 4-1:1.0: 4 ports detected [ 1.248045] ata3.00: configured for UDMA/133 [ 1.248404] scsi 2:0:0:0: Direct-Access ATA HGST HUS722T1TAL WA05 PQ: 0 ANSI: 5 [ 1.249363] sd 2:0:0:0: Attached scsi generic sg0 type 0 [ 1.249429] sd 2:0:0:0: [sda] 1953525168 512-byte logical blocks: (1.00 TB/932 GiB) [ 1.249738] sd 2:0:0:0: [sda] Write Protect is off [ 1.249861] sd 2:0:0:0: [sda] Mode Sense: 00 3a 00 00 [ 1.249930] sd 2:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 1.250191] sd 2:0:0:0: [sda] Preferred minimum I/O size 512 bytes [ 1.267350] sda: sda1 sda2 < sda5 > [ 1.267807] sd 2:0:0:0: [sda] Attached SCSI removable disk [ 1.269757] Freeing unused kernel image (initmem) memory: 2680K [ 1.269898] Write protecting the kernel read-only data: 24576k [ 1.290246] Freeing unused kernel image (rodata/data gap) memory: 2028K [ 1.322693] usb 2-4: new high-speed USB device number 3 using xhci_hcd [ 1.448941] usb 2-4: New USB device found, idVendor=0557, idProduct=7000, bcdDevice= 0.00 [ 1.449104] usb 2-4: New USB device strings: Mfr=0, Product=0, SerialNumber=0 [ 1.449788] hub 2-4:1.0: USB hub found [ 1.450003] hub 2-4:1.0: 4 ports detected [ 1.742655] usb 2-4.1: new low-speed USB device number 4 using xhci_hcd [ 1.764205] x86/mm: Checked W+X mappings: passed, no W+X pages found. [ 1.764393] Run /init as init process [ 1.764510] with arguments: [ 1.764511] /init [ 1.764513] placeholder [ 1.764514] with environment: [ 1.764515] HOME=/ [ 1.764516] TERM=linux [ 1.848042] usb 2-4.1: New USB device found, idVendor=0557, idProduct=2419, bcdDevice= 1.00 [ 1.848202] usb 2-4.1: New USB device strings: Mfr=0, Product=0, SerialNumber=0 [ 1.854044] input: HID 0557:2419 as /devices/pci0000:00/0000:00:14.0/usb2/2-4/2-4.1/2-4.1:1.0/0003:0557:2419.0001/input/input2 [ 1.907933] hid-generic 0003:0557:2419.0001: input,hidraw0: USB HID v1.00 Keyboard [HID 0557:2419] on usb-0000:00:14.0-4.1/input0 [ 1.911062] input: HID 0557:2419 as /devices/pci0000:00/0000:00:14.0/usb2/2-4/2-4.1/2-4.1:1.1/0003:0557:2419.0002/input/input3 [ 1.911527] hid-generic 0003:0557:2419.0002: input,hidraw1: USB HID v1.00 Mouse [HID 0557:2419] on usb-0000:00:14.0-4.1/input1 [ 1.931707] usb 2-3.2: new high-speed USB device number 5 using xhci_hcd [ 2.010103] usb 2-3.2: New USB device found, idVendor=05e3, idProduct=0610, bcdDevice=32.98 [ 2.010261] usb 2-3.2: New USB device strings: Mfr=0, Product=1, SerialNumber=0 [ 2.010406] usb 2-3.2: Product: USB2.0 Hub [ 2.011334] hub 2-3.2:1.0: USB hub found [ 2.011779] hub 2-3.2:1.0: 4 ports detected [ 2.198012] ixgbe: Intel(R) 10 Gigabit PCI Express Network Driver [ 2.198182] ixgbe: Copyright (c) 1999-2016 Intel Corporation. [ 2.198665] ACPI Warning: \_SB.PCI0.BR2C._PRT: Return Package has no elements (empty) (20240322/nsprepkg-94) [ 2.200023] xen: registering gsi 16 triggering 0 polarity 1 [ 2.200034] Already setup the GSI :16 [ 2.202939] igb: Intel(R) Gigabit Ethernet Network Driver [ 2.203063] igb: Copyright (c) 2007-2014 Intel Corporation. [ 2.203249] xen: registering gsi 16 triggering 0 polarity 1 [ 2.203256] Already setup the GSI :16 [ 2.232033] pps pps0: new PPS source ptp0 [ 2.232230] igb 0000:07:00.0: added PHC on eth0 [ 2.232365] igb 0000:07:00.0: Intel(R) Gigabit Ethernet Network Connection [ 2.232489] igb 0000:07:00.0: eth0: (PCIe:2.5Gb/s:Width x1) 0c:c4:7a:93:a4:c8 [ 2.232695] igb 0000:07:00.0: eth0: PBA No: 010C00-000 [ 2.232846] igb 0000:07:00.0: Using MSI-X interrupts. 4 rx queue(s), 4 tx queue(s) [ 2.233102] xen: registering gsi 17 triggering 0 polarity 1 [ 2.233111] Already setup the GSI :17 [ 2.261939] pps pps1: new PPS source ptp1 [ 2.262146] igb 0000:08:00.0: added PHC on eth1 [ 2.262280] igb 0000:08:00.0: Intel(R) Gigabit Ethernet Network Connection [ 2.262402] igb 0000:08:00.0: eth1: (PCIe:2.5Gb/s:Width x1) 0c:c4:7a:93:a4:c9 [ 2.262568] igb 0000:08:00.0: eth1: PBA No: 010000-000 [ 2.262696] igb 0000:08:00.0: Using MSI-X interrupts. 4 rx queue(s), 4 tx queue(s) [ 2.262926] xen: registering gsi 16 triggering 0 polarity 1 [ 2.262933] Already setup the GSI :16 [ 2.320556] igb 0000:0b:00.0: added PHC on eth2 [ 2.320712] igb 0000:0b:00.0: Intel(R) Gigabit Ethernet Network Connection [ 2.320835] igb 0000:0b:00.0: eth2: (PCIe:5.0Gb/s:Width x4) 0c:c4:7a:93:a4:ca [ 2.321039] igb 0000:0b:00.0: eth2: PBA No: 010000-000 [ 2.321155] igb 0000:0b:00.0: Using MSI-X interrupts. 8 rx queue(s), 8 tx queue(s) [ 2.321397] xen: registering gsi 17 triggering 0 polarity 1 [ 2.321406] Already setup the GSI :17 [ 2.379763] igb 0000:0b:00.1: added PHC on eth3 [ 2.379903] igb 0000:0b:00.1: Intel(R) Gigabit Ethernet Network Connection [ 2.380025] igb 0000:0b:00.1: eth3: (PCIe:5.0Gb/s:Width x4) 0c:c4:7a:93:a4:cb [ 2.380229] igb 0000:0b:00.1: eth3: PBA No: 010000-000 [ 2.380345] igb 0000:0b:00.1: Using MSI-X interrupts. 8 rx queue(s), 8 tx queue(s) [ 2.380577] xen: registering gsi 18 triggering 0 polarity 1 [ 2.380585] Already setup the GSI :18 [ 2.437256] igb 0000:0b:00.2: added PHC on eth4 [ 2.437399] igb 0000:0b:00.2: Intel(R) Gigabit Ethernet Network Connection [ 2.437521] igb 0000:0b:00.2: eth4: (PCIe:5.0Gb/s:Width x4) 0c:c4:7a:93:a4:cc [ 2.437751] igb 0000:0b:00.2: eth4: PBA No: 010000-000 [ 2.437868] igb 0000:0b:00.2: Using MSI-X interrupts. 8 rx queue(s), 8 tx queue(s) [ 2.438107] xen: registering gsi 19 triggering 0 polarity 1 [ 2.438116] Already setup the GSI :19 [ 2.495417] igb 0000:0b:00.3: added PHC on eth5 [ 2.495561] igb 0000:0b:00.3: Intel(R) Gigabit Ethernet Network Connection [ 2.495696] igb 0000:0b:00.3: eth5: (PCIe:5.0Gb/s:Width x4) 0c:c4:7a:93:a4:cd [ 2.495901] igb 0000:0b:00.3: eth5: PBA No: 010000-000 [ 2.496056] igb 0000:0b:00.3: Using MSI-X interrupts. 8 rx queue(s), 8 tx queue(s) [ 2.498207] igb 0000:07:00.0 enx0cc47a93a4c8: renamed from eth0 [ 2.499027] igb 0000:08:00.0 enx0cc47a93a4c9: renamed from eth1 [ 2.499819] igb 0000:0b:00.1 enx0cc47a93a4cb: renamed from eth3 [ 2.500238] igb 0000:0b:00.0 enx0cc47a93a4ca: renamed from eth2 [ 2.500994] igb 0000:0b:00.2 enx0cc47a93a4cc: renamed from eth4 [ 2.505278] igb 0000:0b:00.3 enx0cc47a93a4cd: renamed from eth5 [ 2.936202] ixgbe 0000:04:00.0: Multiqueue Enabled: Rx Queue count = 8, Tx Queue count = 8 XDP Queue count = 0 [ 3.065002] ixgbe 0000:04:00.0: MAC: 5, PHY: 0, PBA No: 020B00-000 [ 3.065133] ixgbe 0000:04:00.0: 0c:c4:7a:93:a8:9e [ 3.360938] ixgbe 0000:04:00.0: Intel(R) 10 Gigabit Network Connection [ 3.361274] ACPI Warning: \_SB.PCI0.BR2C._PRT: Return Package has no elements (empty) (20240322/nsprepkg-94) [ 3.361494] xen: registering gsi 17 triggering 0 polarity 1 [ 3.361505] Already setup the GSI :17 [ 4.101707] ixgbe 0000:04:00.1: Multiqueue Enabled: Rx Queue count = 8, Tx Queue count = 8 XDP Queue count = 0 [ 4.231180] ixgbe 0000:04:00.1: MAC: 5, PHY: 0, PBA No: 020B00-000 [ 4.231371] ixgbe 0000:04:00.1: 0c:c4:7a:93:a8:9f [ 4.520250] ixgbe 0000:04:00.1: Intel(R) 10 Gigabit Network Connection [ 4.522666] ixgbe 0000:04:00.1 enx0cc47a93a89f: renamed from eth1 [ 4.523024] ixgbe 0000:04:00.0 enx0cc47a93a89e: renamed from eth0 [ 4.938490] EXT4-fs (dm-0): mounting ext3 file system using the ext4 subsystem [ 4.946254] EXT4-fs (dm-0): mounted filesystem 4c47cb74-da0d-4aee-91f4-78e2a956f212 ro with ordered data mode. Quota mode: none. [ 8.441878] EXT4-fs (dm-0): re-mounted 4c47cb74-da0d-4aee-91f4-78e2a956f212 r/w. Quota mode: none. [ 9.677293] EXT4-fs (sda1): mounting ext3 file system using the ext4 subsystem [ 9.698123] EXT4-fs (sda1): mounted filesystem 8391690d-e447-4d55-855c-fed949272879 r/w with ordered data mode. Quota mode: none. [ 9.790490] Adding 1949692k swap on /dev/mapper/debina1--vg-swap_1. Priority:-2 extents:1 across:1949692k [ 11.374864] xenbr0: port 1(enx0cc47a93a4c8) entered blocking state [ 11.375040] xenbr0: port 1(enx0cc47a93a4c8) entered disabled state [ 11.375173] igb 0000:07:00.0 enx0cc47a93a4c8: entered allmulticast mode [ 11.375342] igb 0000:07:00.0 enx0cc47a93a4c8: entered promiscuous mode [ 14.406278] igb 0000:07:00.0 enx0cc47a93a4c8: igb: enx0cc47a93a4c8 NIC Link is Up 1000 Mbps Full Duplex, Flow Control: RX [ 14.619069] xenbr0: port 1(enx0cc47a93a4c8) entered blocking state [ 14.619258] xenbr0: port 1(enx0cc47a93a4c8) entered forwarding state