[ 0.000000] Linux version 6.10.0-rc3+ (osstest@himrod0) (gcc (Debian 12.2.0-14) 12.2.0, GNU ld (GNU Binutils for Debian) 2.40) #1 SMP PREEMPT_DYNAMIC Thu Jun 13 21:42:28 UTC 2024 [ 0.000000] Command line: placeholder root=/dev/mapper/italia0--vg-root ro console=hvc0 [ 0.000000] Released 0 page(s) [ 0.000000] BIOS-provided physical RAM map: [ 0.000000] Xen: [mem 0x0000000000000000-0x000000000009afff] usable [ 0.000000] Xen: [mem 0x000000000009bc00-0x00000000000fffff] reserved [ 0.000000] Xen: [mem 0x0000000000100000-0x0000000020064fff] usable [ 0.000000] Xen: [mem 0x00000000ab9ba000-0x00000000bba3afff] ACPI NVS [ 0.000000] Xen: [mem 0x00000000bc60a000-0x00000000bc73ffff] reserved [ 0.000000] Xen: [mem 0x00000000beaee000-0x00000000beaf8fff] reserved [ 0.000000] Xen: [mem 0x00000000beb05000-0x00000000beb15fff] reserved [ 0.000000] Xen: [mem 0x00000000bed3a000-0x00000000beddffff] reserved [ 0.000000] Xen: [mem 0x00000000bede0000-0x00000000befdffff] ACPI NVS [ 0.000000] Xen: [mem 0x00000000befe0000-0x00000000beffefff] ACPI data [ 0.000000] Xen: [mem 0x00000000bf000000-0x00000000bfffffff] reserved [ 0.000000] Xen: [mem 0x00000000f8000000-0x00000000fbffffff] reserved [ 0.000000] Xen: [mem 0x00000000fec00000-0x00000000fec00fff] reserved [ 0.000000] Xen: [mem 0x00000000fed19000-0x00000000fed19fff] reserved [ 0.000000] Xen: [mem 0x00000000fed1c000-0x00000000fed1ffff] reserved [ 0.000000] Xen: [mem 0x00000000fed90000-0x00000000fed90fff] reserved [ 0.000000] Xen: [mem 0x00000000fee00000-0x00000000feefffff] reserved [ 0.000000] Xen: [mem 0x00000000ffa00000-0x00000000ffffffff] reserved [ 0.000000] NX (Execute Disable) protection: active [ 0.000000] APIC: Static calls initialized [ 0.000000] SMBIOS 2.6 present. [ 0.000000] DMI: Intel Corporation SandyBridge Platform/To be filled by O.E.M., BIOS S1200BT.86B.02.00.0042.050820141549 05/08/2014 [ 0.000000] DMI: Memory slots populated: 1/4 [ 0.000000] Hypervisor detected: Xen PV [ 0.000022] Xen PV: Detected 4 vCPUS [ 0.000484] tsc: Detected 3092.972 MHz processor [ 0.000899] e820: update [mem 0x00000000-0x00000fff] usable ==> reserved [ 0.000902] e820: remove [mem 0x000a0000-0x000fffff] usable [ 0.000908] last_pfn = 0x20065 max_arch_pfn = 0x400000000 [ 0.000911] MTRR map: 3 entries (0 fixed + 3 variable; max 20), built from 10 variable MTRRs [ 0.000912] MTRRs set to read-only [ 0.000915] x86/PAT: Configuration [0-7]: WB WT UC- UC WC WP UC UC [ 0.000952] Kernel/User page tables isolation: disabled on XEN PV. [ 0.024668] RAMDISK: [mem 0x04000000-0x053a4fff] [ 0.024676] ACPI: Early table checksum verification disabled [ 0.034210] ACPI: RSDP 0x00000000000F0410 000024 (v02 INTEL ) [ 0.034221] ACPI: XSDT 0x00000000BEFFDE18 0000BC (v01 INTEL S1200BTS 06222004 INTL 20090903) [ 0.034253] ACPI: FACP 0x00000000BEFFCA98 0000F4 (v04 INTEL S1200BTS 06222004 INTL 20090903) [ 0.034293] ACPI: DSDT 0x00000000BEFEE018 00CE48 (v02 INTEL S1200BTS 00000000 INTL 20100331) [ 0.034308] ACPI: FACS 0x00000000BEFFDD40 000040 [ 0.034324] ACPI: APIC 0x00000000BEFFB018 000652 (v03 INTEL S1200BTS 06222004 INTL 20090903) [ 0.034339] ACPI: SPMI 0x00000000BEFFEC18 000040 (v05 INTEL S1200BTS 06222004 INTL 20090903) [ 0.034354] ACPI: MCFG 0x00000000BEFFEB98 00003C (v01 INTEL S1200BTS 06222004 INTL 20090903) [ 0.034370] ACPI: WDDT 0x00000000BEFFEF18 000040 (v01 INTEL S1200BTS 06222004 INTL 20090903) [ 0.034385] ACPI: HPET 0x00000000BEFFEE98 000038 (v01 INTEL S1200BTS 06222004 INTL 20090903) [ 0.034400] ACPI: SSDT 0x00000000BEFEB018 0010A8 (v02 INTEL S1200BTS 00001000 INTL 20100331) [ 0.034415] ACPI: BOOT 0x00000000BEFFEE18 000028 (v01 INTEL S1200BTS 06222004 INTL 20090903) [ 0.034430] ACPI: SSDT 0x00000000BEFE7698 0005E0 (v02 INTEL S1200BTS 00003000 INTL 20100331) [ 0.034445] ACPI: SSDT 0x00000000BEFE6018 000A92 (v02 INTEL S1200BTS 00003000 INTL 20100331) [ 0.034461] ACPI: SSDT 0x00000000BEFEA598 00054D (v01 INTEL S1200BTS 00001000 INTL 20100331) [ 0.034476] ACPI: SSDT 0x00000000BEFFDB18 000069 (v01 INTEL S1200BTS 00001000 INTL 20100331) [ 0.034491] ACPI: SSDT 0x00000000BEFE9E18 00017B (v02 INTEL S1200BTS 00002000 INTL 20100331) [ 0.034506] ACPI: RMAD 0x00000000BEFE8F18 000078 (v01 INTEL S1200BTS 00000001 INTL 00000001) [ 0.034521] ACPI: SPCR 0x00000000BEFFED98 000050 (v01 INTEL S1200BTS 06222004 INTL 20090903) [ 0.034537] ACPI: HEST 0x00000000BEFFCF18 0000A8 (v01 INTEL S1200BTS 00000001 INTL 00000001) [ 0.034552] ACPI: BERT 0x00000000BEFFED18 000030 (v01 INTEL S1200BTS 00000001 INTL 00000001) [ 0.034567] ACPI: ERST 0x00000000BEFE8C98 000230 (v01 INTEL S1200BTS 00000001 INTL 00000001) [ 0.034583] ACPI: EINJ 0x00000000BEFFC918 000130 (v01 INTEL S1200BTS 00000001 INTL 00000001) [ 0.034591] ACPI: Reserving FACP table memory at [mem 0xbeffca98-0xbeffcb8b] [ 0.034592] ACPI: Reserving DSDT table memory at [mem 0xbefee018-0xbeffae5f] [ 0.034593] ACPI: Reserving FACS table memory at [mem 0xbeffdd40-0xbeffdd7f] [ 0.034594] ACPI: Reserving APIC table memory at [mem 0xbeffb018-0xbeffb669] [ 0.034595] ACPI: Reserving SPMI table memory at [mem 0xbeffec18-0xbeffec57] [ 0.034596] ACPI: Reserving MCFG table memory at [mem 0xbeffeb98-0xbeffebd3] [ 0.034596] ACPI: Reserving WDDT table memory at [mem 0xbeffef18-0xbeffef57] [ 0.034597] ACPI: Reserving HPET table memory at [mem 0xbeffee98-0xbeffeecf] [ 0.034598] ACPI: Reserving SSDT table memory at [mem 0xbefeb018-0xbefec0bf] [ 0.034599] ACPI: Reserving BOOT table memory at [mem 0xbeffee18-0xbeffee3f] [ 0.034600] ACPI: Reserving SSDT table memory at [mem 0xbefe7698-0xbefe7c77] [ 0.034600] ACPI: Reserving SSDT table memory at [mem 0xbefe6018-0xbefe6aa9] [ 0.034601] ACPI: Reserving SSDT table memory at [mem 0xbefea598-0xbefeaae4] [ 0.034602] ACPI: Reserving SSDT table memory at [mem 0xbeffdb18-0xbeffdb80] [ 0.034603] ACPI: Reserving SSDT table memory at [mem 0xbefe9e18-0xbefe9f92] [ 0.034604] ACPI: Reserving RMAD table memory at [mem 0xbefe8f18-0xbefe8f8f] [ 0.034604] ACPI: Reserving SPCR table memory at [mem 0xbeffed98-0xbeffede7] [ 0.034605] ACPI: Reserving HEST table memory at [mem 0xbeffcf18-0xbeffcfbf] [ 0.034606] ACPI: Reserving BERT table memory at [mem 0xbeffed18-0xbeffed47] [ 0.034607] ACPI: Reserving ERST table memory at [mem 0xbefe8c98-0xbefe8ec7] [ 0.034608] ACPI: Reserving EINJ table memory at [mem 0xbeffc918-0xbeffca47] [ 0.034700] APIC: Switched APIC routing to: Xen PV [ 0.039350] Zone ranges: [ 0.039351] DMA [mem 0x0000000000001000-0x0000000000ffffff] [ 0.039353] DMA32 [mem 0x0000000001000000-0x0000000020064fff] [ 0.039355] Normal empty [ 0.039356] Movable zone start for each node [ 0.039356] Early memory node ranges [ 0.039357] node 0: [mem 0x0000000000001000-0x000000000009afff] [ 0.039358] node 0: [mem 0x0000000000100000-0x0000000020064fff] [ 0.039360] Initmem setup node 0 [mem 0x0000000000001000-0x0000000020064fff] [ 0.039365] On node 0, zone DMA: 1 pages in unavailable ranges [ 0.039404] On node 0, zone DMA: 101 pages in unavailable ranges [ 0.041048] On node 0, zone DMA32: 32667 pages in unavailable ranges [ 0.041055] p2m virtual area at (____ptrval____), size is 40000000 [ 0.176956] Remapped 101 page(s) [ 0.177638] ACPI: PM-Timer IO Port: 0x408 [ 0.177797] ACPI: LAPIC_NMI (acpi_id[0xff] dfl dfl lint[0x1]) [ 0.177842] IOAPIC[0]: apic_id 2, version 32, address 0xfec00000, GSI 0-23 [ 0.177868] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl) [ 0.177871] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level) [ 0.177924] ACPI: Using ACPI (MADT) for SMP configuration information [ 0.177929] ACPI: HPET id: 0x8086a701 base: 0xfed00000 [ 0.177938] ACPI: SPCR: SPCR table version 1 [ 0.177940] ACPI: SPCR: console: uart,io,0x3f8,115200 [ 0.177949] CPU topo: Max. logical packages: 1 [ 0.177950] CPU topo: Max. logical dies: 1 [ 0.177951] CPU topo: Max. dies per package: 1 [ 0.177956] CPU topo: Max. threads per core: 1 [ 0.177957] CPU topo: Num. cores per package: 4 [ 0.177957] CPU topo: Num. threads per package: 4 [ 0.177958] CPU topo: Allowing 4 present CPUs plus 0 hotplug CPUs [ 0.177974] PM: hibernation: Registered nosave memory: [mem 0x00000000-0x00000fff] [ 0.177976] PM: hibernation: Registered nosave memory: [mem 0x0009b000-0x0009bfff] [ 0.177977] PM: hibernation: Registered nosave memory: [mem 0x0009c000-0x000fffff] [ 0.177978] [mem 0x20065000-0xab9b9fff] available for PCI devices [ 0.177982] Booting kernel on Xen [ 0.177983] Xen version: 4.19-unstable (preserve-AD) [ 0.177986] clocksource: refined-jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 1910969940391419 ns [ 0.183406] setup_percpu: NR_CPUS:64 nr_cpumask_bits:4 nr_cpu_ids:4 nr_node_ids:1 [ 0.183843] percpu: Embedded 57 pages/cpu s194408 r8192 d30872 u524288 [ 0.183848] pcpu-alloc: s194408 r8192 d30872 u524288 alloc=1*2097152 [ 0.183851] pcpu-alloc: [0] 0 1 2 3 [ 0.183901] xen: PV spinlocks enabled [ 0.183904] PV qspinlock hash table entries: 256 (order: 0, 4096 bytes, linear) [ 0.183906] Kernel command line: placeholder root=/dev/mapper/italia0--vg-root ro console=hvc0 [ 0.183941] Unknown kernel command line parameters "placeholder", will be passed to user space. [ 0.184032] Dentry cache hash table entries: 65536 (order: 7, 524288 bytes, linear) [ 0.184075] Inode-cache hash table entries: 32768 (order: 6, 262144 bytes, linear) [ 0.184733] Built 1 zonelists, mobility grouping on. Total pages: 131071 [ 0.184736] mem auto-init: stack:all(zero), heap alloc:off, heap free:off, mlocked free:off [ 0.184739] software IO TLB: area num 4. [ 0.246843] Memory: 386516K/524284K available (16384K kernel code, 2753K rwdata, 6164K rodata, 2680K init, 1864K bss, 137516K reserved, 0K cma-reserved) [ 0.247019] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1 [ 0.249300] Dynamic Preempt: voluntary [ 0.249467] rcu: Preemptible hierarchical RCU implementation. [ 0.249468] rcu: RCU event tracing is enabled. [ 0.249469] rcu: RCU restricting CPUs from NR_CPUS=64 to nr_cpu_ids=4. [ 0.249470] Trampoline variant of Tasks RCU enabled. [ 0.249471] rcu: RCU calculated value of scheduler-enlistment delay is 100 jiffies. [ 0.249472] rcu: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=4 [ 0.249495] RCU Tasks: Setting shift to 2 and lim to 1 rcu_task_cb_adjust=1. [ 0.261536] NR_IRQS: 4352, nr_irqs: 456, preallocated irqs: 16 [ 0.261691] xen:events: Using FIFO-based ABI [ 0.261714] xen: --> pirq=1 -> irq=1 (gsi=1) [ 0.261723] xen: --> pirq=2 -> irq=2 (gsi=2) [ 0.261732] xen: --> pirq=3 -> irq=3 (gsi=3) [ 0.261740] xen: --> pirq=4 -> irq=4 (gsi=4) [ 0.261748] xen: --> pirq=5 -> irq=5 (gsi=5) [ 0.261756] xen: --> pirq=6 -> irq=6 (gsi=6) [ 0.261764] xen: --> pirq=7 -> irq=7 (gsi=7) [ 0.261772] xen: --> pirq=8 -> irq=8 (gsi=8) [ 0.261781] xen: --> pirq=9 -> irq=9 (gsi=9) [ 0.261790] xen: --> pirq=10 -> irq=10 (gsi=10) [ 0.261798] xen: --> pirq=11 -> irq=11 (gsi=11) [ 0.261806] xen: --> pirq=12 -> irq=12 (gsi=12) [ 0.261815] xen: --> pirq=13 -> irq=13 (gsi=13) [ 0.261823] xen: --> pirq=14 -> irq=14 (gsi=14) [ 0.261831] xen: --> pirq=15 -> irq=15 (gsi=15) [ 0.261840] rcu: srcu_init: Setting srcu_struct sizes based on contention. [ 0.267155] Console: colour VGA+ 80x25 [ 0.267158] printk: legacy console [tty0] enabled [ 0.283406] printk: legacy console [hvc0] enabled [ 0.284760] ACPI: Core revision 20240322 [ 0.289358] clocksource: xen: mask: 0xffffffffffffffff max_cycles: 0x1cd42e4dffb, max_idle_ns: 881590591483 ns [ 0.289515] Xen: using vcpuop timer interface [ 0.289520] installing Xen timer for CPU 0 [ 0.289671] clocksource: tsc-early: mask: 0xffffffffffffffff max_cycles: 0x2c955856658, max_idle_ns: 440795256416 ns [ 0.289829] Calibrating delay loop (skipped), value calculated using timer frequency.. 6185.94 BogoMIPS (lpj=3092972) [ 0.290134] Last level iTLB entries: 4KB 512, 2MB 8, 4MB 8 [ 0.290252] Last level dTLB entries: 4KB 512, 2MB 32, 4MB 32, 1GB 0 [ 0.290377] Spectre V1 : Mitigation: usercopy/swapgs barriers and __user pointer sanitization [ 0.290569] Spectre V2 : Mitigation: Retpolines [ 0.290836] Spectre V2 : Spectre v2 / SpectreRSB mitigation: Filling RSB on context switch [ 0.290985] Spectre V2 : Spectre v2 / SpectreRSB : Filling RSB on VMEXIT [ 0.291104] Spectre V2 : Enabling Restricted Speculation for firmware calls [ 0.291224] Spectre V2 : mitigation: Enabling conditional Indirect Branch Prediction Barrier [ 0.291370] Speculative Store Bypass: Mitigation: Speculative Store Bypass disabled via prctl [ 0.291835] MDS: Mitigation: Clear CPU buffers [ 0.291949] MMIO Stale Data: Unknown: No mitigations [ 0.292116] x86/fpu: Supporting XSAVE feature 0x001: 'x87 floating point registers' [ 0.292261] x86/fpu: Supporting XSAVE feature 0x002: 'SSE registers' [ 0.292378] x86/fpu: Supporting XSAVE feature 0x004: 'AVX registers' [ 0.292495] x86/fpu: xstate_offset[2]: 576, xstate_sizes[2]: 256 [ 0.292614] x86/fpu: Enabled xstate features 0x7, context size is 832 bytes, using 'standard' format. [ 0.311463] Freeing SMP alternatives memory: 40K [ 0.311590] pid_max: default: 32768 minimum: 301 [ 0.311718] LSM: initializing lsm=capability,selinux [ 0.311834] SELinux: Initializing. [ 0.311966] Mount-cache hash table entries: 1024 (order: 1, 8192 bytes, linear) [ 0.312112] Mountpoint-cache hash table entries: 1024 (order: 1, 8192 bytes, linear) [ 0.312575] cpu 0 spinlock event irq 25 [ 0.312729] VPMU disabled by hypervisor. [ 0.313381] Performance Events: unsupported p6 CPU model 58 no PMU driver, software events only. [ 0.313533] signal: max sigframe size: 1776 [ 0.313720] rcu: Hierarchical SRCU implementation. [ 0.313833] rcu: Max phase no-delay instances is 400. [ 0.314446] smp: Bringing up secondary CPUs ... [ 0.314827] installing Xen timer for CPU 1 [ 0.315332] installing Xen timer for CPU 2 [ 0.315875] installing Xen timer for CPU 3 [ 0.028984] [Firmware Bug]: CPU 1: APIC ID mismatch. CPUID: 0x0001 APIC: 0x0002 [ 0.316092] cpu 1 spinlock event irq 45 [ 0.028984] [Firmware Bug]: CPU 2: APIC ID mismatch. CPUID: 0x0002 APIC: 0x0004 [ 0.316875] cpu 2 spinlock event irq 46 [ 0.028984] [Firmware Bug]: CPU 3: APIC ID mismatch. CPUID: 0x0003 APIC: 0x0006 [ 0.317134] cpu 3 spinlock event irq 47 [ 0.318040] smp: Brought up 1 node, 4 CPUs [ 0.318317] devtmpfs: initialized [ 0.318317] x86/mm: Memory block size: 128MB [ 0.319065] ACPI: PM: Registering ACPI NVS region [mem 0xab9ba000-0xbba3afff] (268963840 bytes) [ 0.321226] ACPI: PM: Registering ACPI NVS region [mem 0xbede0000-0xbefdffff] (2097152 bytes) [ 0.321435] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 1911260446275000 ns [ 0.321588] futex hash table entries: 1024 (order: 4, 65536 bytes, linear) [ 0.321834] PM: RTC time: 01:40:53, date: 2024-06-14 [ 0.322104] NET: Registered PF_NETLINK/PF_ROUTE protocol family [ 0.322296] xen:grant_table: Grant tables using version 1 layout [ 0.322433] Grant table initialized [ 0.322662] audit: initializing netlink subsys (disabled) [ 0.322854] audit: type=2000 audit(1718329253.900:1): state=initialized audit_enabled=0 res=1 [ 0.323006] thermal_sys: Registered thermal governor 'step_wise' [ 0.323006] thermal_sys: Registered thermal governor 'user_space' [ 0.323025] Simple Boot Flag at 0x4f set to 0x1 [ 0.323272] ACPI FADT declares the system doesn't support PCIe ASPM, so disable it [ 0.323926] PCI: ECAM [mem 0xf8000000-0xfbffffff] (base 0xf8000000) for domain 0000 [bus 00-3f] [ 0.324077] PCI: ECAM [mem 0xf8000000-0xfbffffff] reserved as E820 entry [ 0.360886] PCI: Using configuration type 1 for base access [ 0.361061] kprobes: kprobe jump-optimization is enabled. All kprobes are optimized if possible. [ 0.361061] ACPI: Added _OSI(Module Device) [ 0.361061] ACPI: Added _OSI(Processor Device) [ 0.361839] ACPI: Added _OSI(3.0 _SCP Extensions) [ 0.361953] ACPI: Added _OSI(Processor Aggregator Device) [ 0.368557] ACPI: 7 ACPI AML tables successfully acquired and loaded [ 0.369329] xen: registering gsi 9 triggering 0 polarity 0 [ 0.369943] ACPI: [Firmware Bug]: BIOS _OSI(Linux) query ignored [ 0.373451] ACPI: Dynamic OEM Table Load: [ 0.373570] ACPI: SSDT 0xFFFF888003937000 00083B (v01 PmRef Cpu0Cst 00003001 INTL 20100331) [ 0.374296] ACPI: Dynamic OEM Table Load: [ 0.374414] ACPI: SSDT 0xFFFF88800399E400 000303 (v01 PmRef ApIst 00003000 INTL 20100331) [ 0.375068] ACPI: Dynamic OEM Table Load: [ 0.375185] ACPI: SSDT 0xFFFF888003980A00 000119 (v01 PmRef ApCst 00003000 INTL 20100331) [ 0.376155] ACPI: _OSC evaluated successfully for all CPUs [ 0.376412] ACPI: Interpreter enabled [ 0.376539] ACPI: PM: (supports S0 S1 S3 S5) [ 0.376652] ACPI: Using IOAPIC for interrupt routing [ 0.376792] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug [ 0.376833] PCI: Using E820 reservations for host bridge windows [ 0.377236] ACPI: Enabled 10 GPEs in block 00 to 3F [ 0.385638] acpi ABCDEFGH:00: ACPI dock station (docks/bays count: 1) [ 0.388314] ACPI: \_TZ_.FN00: New power resource [ 0.388489] ACPI: \_TZ_.FN01: New power resource [ 0.388663] ACPI: \_TZ_.FN02: New power resource [ 0.388841] ACPI: \_TZ_.FN03: New power resource [ 0.389015] ACPI: \_TZ_.FN04: New power resource [ 0.389901] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-3e]) [ 0.390027] acpi PNP0A08:00: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI HPX-Type3] [ 0.390592] acpi PNP0A08:00: _OSC: platform does not support [LTR] [ 0.391314] acpi PNP0A08:00: _OSC: OS now controls [PME PCIeCapability] [ 0.391436] acpi PNP0A08:00: FADT indicates ASPM is unsupported, using BIOS configuration [ 0.392080] PCI host bridge to bus 0000:00 [ 0.392195] pci_bus 0000:00: root bus resource [io 0x0000-0x0cf7 window] [ 0.392369] pci_bus 0000:00: root bus resource [io 0x0d00-0xffff window] [ 0.392489] pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff window] [ 0.392632] pci_bus 0000:00: root bus resource [mem 0x000d0000-0x000e7fff window] [ 0.392774] pci_bus 0000:00: root bus resource [mem 0xc0000000-0xfeafffff window] [ 0.392833] pci_bus 0000:00: root bus resource [mem 0xfed40000-0xfed44fff window] [ 0.392977] pci_bus 0000:00: root bus resource [bus 00-3e] [ 0.393136] pci 0000:00:00.0: [8086:0158] type 00 class 0x060000 conventional PCI endpoint [ 0.393856] pci 0000:00:19.0: [8086:1502] type 00 class 0x020000 conventional PCI endpoint [ 0.394076] pci 0000:00:19.0: BAR 0 [mem 0xc1b00000-0xc1b1ffff] [ 0.394234] pci 0000:00:19.0: BAR 1 [mem 0xc1b70000-0xc1b70fff] [ 0.394391] pci 0000:00:19.0: BAR 2 [io 0x4040-0x405f] [ 0.394838] pci 0000:00:19.0: PME# supported from D0 D3hot D3cold [ 0.395235] pci 0000:00:1a.0: [8086:1c2d] type 00 class 0x0c0320 conventional PCI endpoint [ 0.395455] pci 0000:00:1a.0: BAR 0 [mem 0xc1b60000-0xc1b603ff] [ 0.395984] pci 0000:00:1a.0: PME# supported from D0 D3hot D3cold [ 0.396369] pci 0000:00:1c.0: [8086:1c10] type 01 class 0x060400 PCIe Root Port [ 0.396669] pci 0000:00:1c.0: PCI bridge to [bus 01] [ 0.396802] pci 0000:00:1c.0: bridge window [io 0x3000-0x3fff] [ 0.396844] pci 0000:00:1c.0: bridge window [mem 0xc1000000-0xc19fffff] [ 0.397015] pci 0000:00:1c.0: bridge window [mem 0xc1c00000-0xc25fffff 64bit pref] [ 0.397440] pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold [ 0.397690] pci 0000:00:1c.0: Enabling MPC IRBNCE [ 0.397811] pci 0000:00:1c.0: Intel PCH root port ACS workaround enabled [ 0.398027] pci 0000:00:1c.4: [8086:1c18] type 01 class 0x060400 PCIe Root Port [ 0.398327] pci 0000:00:1c.4: PCI bridge to [bus 02] [ 0.398459] pci 0000:00:1c.4: bridge window [io 0x2000-0x2fff] [ 0.398589] pci 0000:00:1c.4: bridge window [mem 0xc1a00000-0xc1afffff] [ 0.399086] pci 0000:00:1c.4: PME# supported from D0 D3hot D3cold [ 0.399291] pci 0000:00:1c.4: Enabling MPC IRBNCE [ 0.399411] pci 0000:00:1c.4: Intel PCH root port ACS workaround enabled [ 0.399733] pci 0000:00:1d.0: [8086:1c26] type 00 class 0x0c0320 conventional PCI endpoint [ 0.399907] pci 0000:00:1d.0: BAR 0 [mem 0xc1b50000-0xc1b503ff] [ 0.400491] pci 0000:00:1d.0: PME# supported from D0 D3hot D3cold [ 0.400819] pci 0000:00:1e.0: [8086:244e] type 01 class 0x060401 conventional PCI bridge [ 0.401119] pci 0000:00:1e.0: PCI bridge to [bus 03] (subtractive decode) [ 0.401267] pci 0000:00:1e.0: bridge window [mem 0xc0000000-0xc0ffffff] [ 0.401771] pci 0000:00:1f.0: [8086:1c52] type 00 class 0x060100 conventional PCI endpoint [ 0.402459] pci 0000:00:1f.2: [8086:1c02] type 00 class 0x010601 conventional PCI endpoint [ 0.402684] pci 0000:00:1f.2: BAR 0 [io 0x4090-0x4097] [ 0.402839] pci 0000:00:1f.2: BAR 1 [io 0x4080-0x4083] [ 0.402993] pci 0000:00:1f.2: BAR 2 [io 0x4070-0x4077] [ 0.403147] pci 0000:00:1f.2: BAR 3 [io 0x4060-0x4063] [ 0.403301] pci 0000:00:1f.2: BAR 4 [io 0x4020-0x403f] [ 0.403455] pci 0000:00:1f.2: BAR 5 [mem 0xc1b40000-0xc1b407ff] [ 0.403813] pci 0000:00:1f.2: PME# supported from D3hot [ 0.404022] pci 0000:00:1f.3: [8086:1c22] type 00 class 0x0c0500 conventional PCI endpoint [ 0.404301] pci 0000:00:1f.3: BAR 0 [mem 0xc1b30000-0xc1b300ff 64bit] [ 0.404536] pci 0000:00:1f.3: BAR 4 [io 0x4000-0x401f] [ 0.405014] pci 0000:00:1c.0: PCI bridge to [bus 01] [ 0.405485] pci 0000:02:00.0: [8086:10d3] type 00 class 0x020000 PCIe Endpoint [ 0.405726] pci 0000:02:00.0: BAR 0 [mem 0xc1a00000-0xc1a1ffff] [ 0.405936] pci 0000:02:00.0: BAR 2 [io 0x2000-0x201f] [ 0.406105] pci 0000:02:00.0: BAR 3 [mem 0xc1a20000-0xc1a23fff] [ 0.406707] pci 0000:02:00.0: PME# supported from D0 D3hot D3cold [ 0.407252] pci 0000:00:1c.4: PCI bridge to [bus 02] [ 0.407511] pci_bus 0000:03: extended config space not accessible [ 0.407688] pci 0000:03:02.0: [126f:0712] type 00 class 0x030000 conventional PCI endpoint [ 0.407906] pci 0000:03:02.0: BAR 0 [mem 0xc0000000-0xc0ffffff] [ 0.408338] pci 0000:03:02.0: Video device with shadowed ROM at [mem 0x000c0000-0x000dffff] [ 0.408941] pci 0000:03:02.0: supports D1 D2 [ 0.409304] pci 0000:00:1e.0: PCI bridge to [bus 03] (subtractive decode) [ 0.409469] pci 0000:00:1e.0: bridge window [io 0x0000-0x0cf7 window] (subtractive decode) [ 0.409617] pci 0000:00:1e.0: bridge window [io 0x0d00-0xffff window] (subtractive decode) [ 0.409811] pci 0000:00:1e.0: bridge window [mem 0x000a0000-0x000bffff window] (subtractive decode) [ 0.409833] pci 0000:00:1e.0: bridge window [mem 0x000d0000-0x000e7fff window] (subtractive decode) [ 0.409983] pci 0000:00:1e.0: bridge window [mem 0xc0000000-0xfeafffff window] (subtractive decode) [ 0.410132] pci 0000:00:1e.0: bridge window [mem 0xfed40000-0xfed44fff window] (subtractive decode) [ 0.410388] pci_bus 0000:00: on NUMA node 0 [ 0.410552] xen: registering gsi 13 triggering 1 polarity 0 [ 0.411113] ACPI: PCI: Interrupt link LNKA configured for IRQ 11 [ 0.411304] ACPI: PCI: Interrupt link LNKB configured for IRQ 10 [ 0.411491] ACPI: PCI: Interrupt link LNKC configured for IRQ 0 [ 0.411610] ACPI: PCI: Interrupt link LNKC disabled [ 0.411791] ACPI: PCI: Interrupt link LNKD configured for IRQ 10 [ 0.411902] ACPI: PCI: Interrupt link LNKE configured for IRQ 3 [ 0.412088] ACPI: PCI: Interrupt link LNKF configured for IRQ 11 [ 0.412315] ACPI: PCI: Interrupt link LNKG configured for IRQ 5 [ 0.412500] ACPI: PCI: Interrupt link LNKH configured for IRQ 0 [ 0.412618] ACPI: PCI: Interrupt link LNKH disabled [ 0.413054] xen:balloon: Initialising balloon driver [ 0.413186] iommu: Default domain type: Translated [ 0.413186] iommu: DMA domain TLB invalidation policy: lazy mode [ 0.413224] SCSI subsystem initialized [ 0.413848] libata version 3.00 loaded. [ 0.413870] ACPI: bus type USB registered [ 0.413996] usbcore: registered new interface driver usbfs [ 0.414117] usbcore: registered new interface driver hub [ 0.414238] usbcore: registered new device driver usb [ 0.414365] pps_core: LinuxPPS API ver. 1 registered [ 0.414480] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti [ 0.414631] PTP clock support registered [ 0.414868] Advanced Linux Sound Architecture Driver Initialized. [ 0.415169] NetLabel: Initializing [ 0.415282] NetLabel: domain hash size = 128 [ 0.415394] NetLabel: protocols = UNLABELED CIPSOv4 CALIPSO [ 0.415525] NetLabel: unlabeled traffic allowed by default [ 0.415843] PCI: Using ACPI for IRQ routing [ 0.426746] PCI: pci_cache_line_size set to 64 bytes [ 0.426891] e820: reserve RAM buffer [mem 0x0009b000-0x0009ffff] [ 0.426894] e820: reserve RAM buffer [mem 0x20065000-0x23ffffff] [ 0.426916] pci 0000:03:02.0: vgaarb: setting as boot VGA device [ 0.426973] pci 0000:03:02.0: vgaarb: bridge control possible [ 0.427090] pci 0000:03:02.0: vgaarb: VGA device added: decodes=io+mem,owns=io+mem,locks=none [ 0.427275] vgaarb: loaded [ 0.428414] clocksource: Switched to clocksource tsc-early [ 0.428597] VFS: Disk quotas dquot_6.6.0 [ 0.428758] VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes) [ 0.428758] hugetlbfs: disabling because there are no supported hugepage sizes [ 0.428758] pnp: PnP ACPI init [ 0.428758] system 00:00: [io 0x0680-0x069f] has been reserved [ 0.428811] system 00:00: [io 0xffff] has been reserved [ 0.428927] system 00:00: [io 0xffff] has been reserved [ 0.429043] system 00:00: [io 0xffff] has been reserved [ 0.429158] system 00:00: [io 0x0400-0x0453] has been reserved [ 0.429277] system 00:00: [io 0x0458-0x047f] has been reserved [ 0.429305] system 00:00: [io 0x0500-0x057f] has been reserved [ 0.429305] system 00:00: [io 0x164e-0x164f] has been reserved [ 0.429305] system 00:00: [io 0x0900-0x090f] has been reserved [ 0.429305] system 00:00: [io 0x0295-0x0296] has been reserved [ 0.429976] xen: registering gsi 8 triggering 1 polarity 0 [ 0.430040] system 00:02: [io 0x0454-0x0457] has been reserved [ 0.430440] xen: registering gsi 4 triggering 1 polarity 0 [ 0.430444] Already setup the GSI :4 [ 0.431017] system 00:04: [mem 0xfed1c000-0xfed1ffff] has been reserved [ 0.431140] system 00:04: [mem 0xfed10000-0xfed17fff] has been reserved [ 0.431260] system 00:04: [mem 0xfed18000-0xfed18fff] has been reserved [ 0.431380] system 00:04: [mem 0xfed19000-0xfed19fff] has been reserved [ 0.431500] system 00:04: [mem 0xf8000000-0xfbffffff] has been reserved [ 0.431619] system 00:04: [mem 0xfed20000-0xfed3ffff] has been reserved [ 0.431738] system 00:04: [mem 0xfed90000-0xfed93fff] could not be reserved [ 0.431871] system 00:04: [mem 0xfed45000-0xfed8ffff] has been reserved [ 0.431991] system 00:04: [mem 0xff000000-0xffffffff] could not be reserved [ 0.432112] system 00:04: [mem 0xfee00000-0xfeefffff] has been reserved [ 0.432232] system 00:04: [mem 0xc1b90000-0xc1b90fff] has been reserved [ 0.432667] system 00:05: [mem 0x00000000-0x0009cfff] could not be reserved [ 0.432850] pnp: PnP ACPI: found 6 devices [ 0.461688] PM-Timer failed consistency check (0xffffff) - aborting. [ 0.461844] NET: Registered PF_INET protocol family [ 0.461991] IP idents hash table entries: 8192 (order: 4, 65536 bytes, linear) [ 0.462302] tcp_listen_portaddr_hash hash table entries: 256 (order: 0, 4096 bytes, linear) [ 0.462453] Table-perturb hash table entries: 65536 (order: 6, 262144 bytes, linear) [ 0.462598] TCP established hash table entries: 4096 (order: 3, 32768 bytes, linear) [ 0.462747] TCP bind hash table entries: 4096 (order: 5, 131072 bytes, linear) [ 0.462926] TCP: Hash tables configured (established 4096 bind 4096) [ 0.463093] UDP hash table entries: 256 (order: 1, 8192 bytes, linear) [ 0.463242] UDP-Lite hash table entries: 256 (order: 1, 8192 bytes, linear) [ 0.463390] NET: Registered PF_UNIX/PF_LOCAL protocol family [ 0.463695] RPC: Registered named UNIX socket transport module. [ 0.463816] RPC: Registered udp transport module. [ 0.463942] RPC: Registered tcp transport module. [ 0.464055] RPC: Registered tcp-with-tls transport module. [ 0.464224] RPC: Registered tcp NFSv4.1 backchannel transport module. [ 0.464676] pci 0000:00:1c.0: PCI bridge to [bus 01] [ 0.464801] pci 0000:00:1c.0: bridge window [io 0x3000-0x3fff] [ 0.464948] pci 0000:00:1c.0: bridge window [mem 0xc1000000-0xc19fffff] [ 0.465080] pci 0000:00:1c.0: bridge window [mem 0xc1c00000-0xc25fffff 64bit pref] [ 0.465248] pci 0000:00:1c.4: PCI bridge to [bus 02] [ 0.465368] pci 0000:00:1c.4: bridge window [io 0x2000-0x2fff] [ 0.465504] pci 0000:00:1c.4: bridge window [mem 0xc1a00000-0xc1afffff] [ 0.465659] pci 0000:00:1e.0: PCI bridge to [bus 03] [ 0.465794] pci 0000:00:1e.0: bridge window [mem 0xc0000000-0xc0ffffff] [ 0.465958] pci_bus 0000:00: resource 4 [io 0x0000-0x0cf7 window] [ 0.466078] pci_bus 0000:00: resource 5 [io 0x0d00-0xffff window] [ 0.466196] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff window] [ 0.466316] pci_bus 0000:00: resource 7 [mem 0x000d0000-0x000e7fff window] [ 0.466437] pci_bus 0000:00: resource 8 [mem 0xc0000000-0xfeafffff window] [ 0.466557] pci_bus 0000:00: resource 9 [mem 0xfed40000-0xfed44fff window] [ 0.466678] pci_bus 0000:01: resource 0 [io 0x3000-0x3fff] [ 0.466794] pci_bus 0000:01: resource 1 [mem 0xc1000000-0xc19fffff] [ 0.466922] pci_bus 0000:01: resource 2 [mem 0xc1c00000-0xc25fffff 64bit pref] [ 0.467109] pci_bus 0000:02: resource 0 [io 0x2000-0x2fff] [ 0.467226] pci_bus 0000:02: resource 1 [mem 0xc1a00000-0xc1afffff] [ 0.467345] pci_bus 0000:03: resource 1 [mem 0xc0000000-0xc0ffffff] [ 0.467464] pci_bus 0000:03: resource 4 [io 0x0000-0x0cf7 window] [ 0.467582] pci_bus 0000:03: resource 5 [io 0x0d00-0xffff window] [ 0.467700] pci_bus 0000:03: resource 6 [mem 0x000a0000-0x000bffff window] [ 0.467820] pci_bus 0000:03: resource 7 [mem 0x000d0000-0x000e7fff window] [ 0.467948] pci_bus 0000:03: resource 8 [mem 0xc0000000-0xfeafffff window] [ 0.468069] pci_bus 0000:03: resource 9 [mem 0xfed40000-0xfed44fff window] [ 0.468309] xen: registering gsi 22 triggering 0 polarity 1 [ 0.468333] xen: --> pirq=22 -> irq=22 (gsi=22) [ 0.488943] pci 0000:00:1a.0: quirk_usb_early_handoff+0x0/0x7c0 took 20205 usecs [ 0.489167] xen: registering gsi 20 triggering 0 polarity 1 [ 0.489190] xen: --> pirq=20 -> irq=20 (gsi=20) [ 0.509943] pci 0000:00:1d.0: quirk_usb_early_handoff+0x0/0x7c0 took 20332 usecs [ 0.510147] PCI: CLS 64 bytes, default 64 [ 0.510294] PCI-DMA: Using software bounce buffering for IO (SWIOTLB) [ 0.510413] software IO TLB: mapped [mem 0x000000001b180000-0x000000001f180000] (64MB) [ 0.510451] Unpacking initramfs... [ 0.510616] kvm_intel: VMX not supported by CPU 1 [ 0.510787] kvm_amd: CPU 1 isn't AMD or Hygon [ 0.510915] clocksource: tsc: mask: 0xffffffffffffffff max_cycles: 0x2c955856658, max_idle_ns: 440795256416 ns [ 0.511105] clocksource: Switched to clocksource tsc [ 0.517074] Initialise system trusted keyrings [ 0.517315] workingset: timestamp_bits=62 max_order=17 bucket_order=0 [ 0.517616] NFS: Registering the id_resolver key type [ 0.517742] Key type id_resolver registered [ 0.517853] Key type id_legacy registered [ 0.518033] 9p: Installing v9fs 9p2000 file system support [ 0.531555] Key type asymmetric registered [ 0.531686] Asymmetric key parser 'x509' registered [ 0.531837] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 251) [ 0.532003] io scheduler mq-deadline registered [ 0.532118] io scheduler kyber registered [ 0.532615] xen: registering gsi 16 triggering 0 polarity 1 [ 0.532646] xen: --> pirq=16 -> irq=16 (gsi=16) [ 0.532935] pcieport 0000:00:1c.0: PME: Signaling with IRQ 50 [ 0.533329] xen: registering gsi 16 triggering 0 polarity 1 [ 0.533335] Already setup the GSI :16 [ 0.533639] pcieport 0000:00:1c.4: PME: Signaling with IRQ 51 [ 0.534082] input: Sleep Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0E:00/input/input0 [ 0.534325] ACPI: button: Sleep Button [SLPB] [ 0.534470] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input1 [ 0.534669] ACPI: button: Power Button [PWRF] [ 0.535158] Monitor-Mwait will be used to enter C-1 state [ 0.535174] Monitor-Mwait will be used to enter C-3 state [ 0.535182] ACPI: \_PR_.CPU0: Found 2 idle states [ 0.535582] ACPI: \_PR_.CPU1: Found 2 idle states [ 0.535967] ACPI: \_PR_.CPU2: Found 2 idle states [ 0.536340] ACPI: \_PR_.CPU3: Found 2 idle states [ 0.537123] thermal LNXTHERM:00: registered as thermal_zone0 [ 0.537244] ACPI: thermal: Thermal Zone [TZ00] (28 C) [ 0.537553] thermal LNXTHERM:01: registered as thermal_zone1 [ 0.537674] ACPI: thermal: Thermal Zone [TZ01] (30 C) [ 0.538150] xen:xen_evtchn: Event-channel device installed [ 0.538379] xen_pciback: backend is vpci [ 0.539161] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled [ 0.539964] hpet_acpi_add: no address or irqs in _CRS [ 0.540171] Non-volatile memory driver v1.3 [ 0.541924] loop: module loaded [ 0.546846] ahci 0000:00:1f.2: version 3.0 [ 0.546945] xen: registering gsi 21 triggering 0 polarity 1 [ 0.546974] xen: --> pirq=21 -> irq=21 (gsi=21) [ 0.557301] ahci 0000:00:1f.2: AHCI vers 0001.0300, 32 command slots, 3 Gbps, SATA mode [ 0.559128] ahci 0000:00:1f.2: 6/6 ports implemented (port mask 0x3f) [ 0.559247] ahci 0000:00:1f.2: flags: 64bit ncq sntf pm led clo pio slum part ems apst [ 0.574826] scsi host0: ahci [ 0.575342] scsi host1: ahci [ 0.575819] scsi host2: ahci [ 0.576218] scsi host3: ahci [ 0.576608] scsi host4: ahci [ 0.576940] scsi host5: ahci [ 0.577107] ata1: SATA max UDMA/133 abar m2048@0xc1b40000 port 0xc1b40100 irq 53 lpm-pol 0 [ 0.577272] ata2: SATA max UDMA/133 abar m2048@0xc1b40000 port 0xc1b40180 irq 53 lpm-pol 0 [ 0.577418] ata3: SATA max UDMA/133 abar m2048@0xc1b40000 port 0xc1b40200 irq 53 lpm-pol 0 [ 0.577565] ata4: SATA max UDMA/133 abar m2048@0xc1b40000 port 0xc1b40280 irq 53 lpm-pol 0 [ 0.577712] ata5: SATA max UDMA/133 abar m2048@0xc1b40000 port 0xc1b40300 irq 53 lpm-pol 0 [ 0.577859] ata6: SATA max UDMA/133 abar m2048@0xc1b40000 port 0xc1b40380 irq 53 lpm-pol 0 [ 0.578219] tun: Universal TUN/TAP device driver, 1.6 [ 0.578431] e100: Intel(R) PRO/100 Network Driver [ 0.578546] e100: Copyright(c) 1999-2006 Intel Corporation [ 0.578669] sky2: driver version 1.30 [ 0.578803] xen_netfront: Initialising Xen virtual ethernet driver [ 0.579094] usbcore: registered new interface driver usblp [ 0.579241] usbcore: registered new interface driver usb-storage [ 0.579245] xen: registering gsi 22 triggering 0 polarity 1 [ 0.579281] i8042: PNP: No PS/2 controller found. [ 0.579368] Already setup the GSI :22 [ 0.579442] ehci-pci 0000:00:1a.0: EHCI Host Controller [ 0.579654] rtc_cmos 00:01: RTC can wake from S4 [ 0.579787] ehci-pci 0000:00:1a.0: new USB bus registered, assigned bus number 1 [ 0.579955] xen: registering gsi 20 triggering 0 polarity 1 [ 0.580000] Already setup the GSI :20 [ 0.580033] ehci-pci 0000:00:1a.0: debug port 2 [ 0.580455] rtc_cmos 00:01: registered as rtc0 [ 0.580661] rtc_cmos 00:01: alarms up to one month, y3k, 242 bytes nvram [ 0.580823] device-mapper: uevent: version 1.0.3 [ 0.581021] device-mapper: ioctl: 4.48.0-ioctl (2023-03-01) initialised: dm-devel@lists.linux.dev [ 0.581192] intel_pstate: CPU model not supported [ 0.581335] hid: raw HID events driver (C) Jiri Kosina [ 0.581566] usbcore: registered new interface driver usbhid [ 0.581694] usbhid: USB HID core driver [ 0.582105] Initializing XFRM netlink socket [ 0.582277] NET: Registered PF_INET6 protocol family [ 0.584369] xen: registering gsi 22 triggering 0 polarity 1 [ 0.584376] Already setup the GSI :22 [ 0.584500] Segment Routing with IPv6 [ 0.584598] i801_smbus 0000:00:1f.3: SMBus using PCI interrupt [ 0.584626] In-situ OAM (IOAM) with IPv6 [ 0.584873] sit: IPv6, IPv4 and MPLS over IPv4 tunneling driver [ 0.585127] NET: Registered PF_PACKET protocol family [ 0.585273] 9pnet: Installing 9P2000 support [ 0.585410] Key type dns_resolver registered [ 0.585981] ehci-pci 0000:00:1a.0: irq 22, io mem 0xc1b60000 [ 0.586466] IPI shorthand broadcast: enabled [ 0.586510] i2c i2c-0: Successfully instantiated SPD at 0x51 [ 0.588754] sched_clock: Marking stable (560006277, 27984259)->(593105602, -5115066) [ 0.589234] Timer migration: 1 hierarchy levels; 8 children per group; 1 crossnode level [ 0.589730] registered taskstats version 1 [ 0.589844] Loading compiled-in X.509 certificates [ 0.591089] PM: Magic number: 12:287:660 [ 0.591273] printk: legacy console [netcon0] enabled [ 0.591390] netconsole: network logging started [ 0.591714] cfg80211: Loading compiled-in X.509 certificates for regulatory database [ 0.593007] ehci-pci 0000:00:1a.0: USB 2.0 started, EHCI 1.00 [ 0.593368] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 6.10 [ 0.593518] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 0.593662] usb usb1: Product: EHCI Host Controller [ 0.593779] usb usb1: Manufacturer: Linux 6.10.0-rc3+ ehci_hcd [ 0.593897] usb usb1: SerialNumber: 0000:00:1a.0 [ 0.594200] hub 1-0:1.0: USB hub found [ 0.594342] hub 1-0:1.0: 2 ports detected [ 0.594685] ehci-pci 0000:00:1d.0: EHCI Host Controller [ 0.594878] ehci-pci 0000:00:1d.0: new USB bus registered, assigned bus number 2 [ 0.595076] ehci-pci 0000:00:1d.0: debug port 2 [ 0.599242] ehci-pci 0000:00:1d.0: irq 20, io mem 0xc1b50000 [ 0.603840] Freeing initrd memory: 20116K [ 0.606010] ehci-pci 0000:00:1d.0: USB 2.0 started, EHCI 1.00 [ 0.606299] usb usb2: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 6.10 [ 0.606448] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 0.606592] usb usb2: Product: EHCI Host Controller [ 0.606708] usb usb2: Manufacturer: Linux 6.10.0-rc3+ ehci_hcd [ 0.606826] usb usb2: SerialNumber: 0000:00:1d.0 [ 0.607133] hub 2-0:1.0: USB hub found [ 0.607264] hub 2-0:1.0: 2 ports detected [ 0.615281] Loaded X.509 cert 'sforshee: 00b28ddf47aef9cea7' [ 0.615587] Loaded X.509 cert 'wens: 61c038651aabdcf94bd0ac7ff06c7248db18c600' [ 0.616203] cfg80211: loaded regulatory.db is malformed or signature is missing/invalid [ 0.616392] ALSA device list: [ 0.616532] No soundcards found. [ 0.835067] usb 1-1: new high-speed USB device number 2 using ehci-pci [ 0.851062] usb 2-1: new high-speed USB device number 2 using ehci-pci [ 0.887681] ata4: SATA link down (SStatus 0 SControl 300) [ 0.887821] ata2: SATA link down (SStatus 0 SControl 300) [ 0.887960] ata5: SATA link down (SStatus 0 SControl 300) [ 0.888113] ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300) [ 0.888254] ata3: SATA link up 1.5 Gbps (SStatus 113 SControl 300) [ 0.889436] ata1.00: ATA-8: WDC WD1003FBYZ-010FB0, 01.01V03, max UDMA/133 [ 0.890044] ata1.00: 1953525168 sectors, multi 16: LBA48 NCQ (depth 32), AA [ 0.891496] ata1.00: configured for UDMA/133 [ 0.891799] scsi 0:0:0:0: Direct-Access ATA WDC WD1003FBYZ-0 1V03 PQ: 0 ANSI: 5 [ 0.892028] ata3.00: ATAPI: Slimtype DVD A DS8ABSH, AP52, max UDMA/100 [ 0.892539] sd 0:0:0:0: [sda] 1953525168 512-byte logical blocks: (1.00 TB/932 GiB) [ 0.892550] sd 0:0:0:0: Attached scsi generic sg0 type 0 [ 0.892705] sd 0:0:0:0: [sda] Write Protect is off [ 0.892922] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00 [ 0.892957] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 0.893188] sd 0:0:0:0: [sda] Preferred minimum I/O size 512 bytes [ 0.893247] ata3.00: configured for UDMA/100 [ 0.895080] scsi 2:0:0:0: CD-ROM Slimtype DVD A DS8ABSH AP52 PQ: 0 ANSI: 5 [ 0.895419] ata6: SATA link down (SStatus 0 SControl 300) [ 0.921546] sda: sda1 sda2 < sda5 > [ 0.922001] sd 0:0:0:0: [sda] Attached SCSI removable disk [ 0.933243] sr 2:0:0:0: [sr0] scsi3-mmc drive: 24x/24x writer dvd-ram cd/rw xa/form2 cdda tray [ 0.933394] cdrom: Uniform CD-ROM driver Revision: 3.20 [ 0.956773] sr 2:0:0:0: Attached scsi CD-ROM sr0 [ 0.956893] sr 2:0:0:0: Attached scsi generic sg1 type 5 [ 0.958809] Freeing unused kernel image (initmem) memory: 2680K [ 0.958947] Write protecting the kernel read-only data: 24576k [ 0.963415] usb 1-1: New USB device found, idVendor=8087, idProduct=0024, bcdDevice= 0.00 [ 0.963565] usb 1-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0 [ 0.964063] hub 1-1:1.0: USB hub found [ 0.964266] hub 1-1:1.0: 6 ports detected [ 0.979402] usb 2-1: New USB device found, idVendor=8087, idProduct=0024, bcdDevice= 0.00 [ 0.979552] usb 2-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0 [ 0.979932] hub 2-1:1.0: USB hub found [ 0.980153] Freeing unused kernel image (rodata/data gap) memory: 2028K [ 0.980154] hub 2-1:1.0: 6 ports detected [ 1.150369] x86/mm: Checked W+X mappings: passed, no W+X pages found. [ 1.150495] Run /init as init process [ 1.150605] with arguments: [ 1.150606] /init [ 1.150607] placeholder [ 1.150608] with environment: [ 1.150609] HOME=/ [ 1.150609] TERM=linux [ 1.494395] e1000e: Intel(R) PRO/1000 Network Driver [ 1.494522] e1000e: Copyright(c) 1999 - 2015 Intel Corporation. [ 1.494741] xen: registering gsi 19 triggering 0 polarity 1 [ 1.494769] xen: --> pirq=19 -> irq=19 (gsi=19) [ 1.495029] e1000e 0000:00:19.0: Interrupt Throttling Rate (ints/sec) set to dynamic conservative mode [ 1.605216] e1000e 0000:00:19.0 0000:00:19.0 (uninitialized): registered PHC clock [ 1.702607] e1000e 0000:00:19.0 eth0: (PCI Express:2.5GT/s:Width x1) 00:1e:67:96:a4:17 [ 1.702760] e1000e 0000:00:19.0 eth0: Intel(R) PRO/1000 Network Connection [ 1.702915] e1000e 0000:00:19.0 eth0: MAC: 10, PHY: 11, PBA No: 0050FF-0FF [ 1.703167] xen: registering gsi 16 triggering 0 polarity 1 [ 1.703174] Already setup the GSI :16 [ 1.703602] e1000e 0000:02:00.0: Interrupt Throttling Rate (ints/sec) set to dynamic conservative mode [ 1.747009] e1000e 0000:02:00.0 0000:02:00.0 (uninitialized): registered PHC clock [ 1.793499] e1000e 0000:02:00.0 eth1: (PCI Express:2.5GT/s:Width x1) 00:1e:67:96:a4:16 [ 1.793654] e1000e 0000:02:00.0 eth1: Intel(R) PRO/1000 Network Connection [ 1.793860] e1000e 0000:02:00.0 eth1: MAC: 3, PHY: 8, PBA No: 1000FF-0FF [ 1.796032] e1000e 0000:02:00.0 enx001e6796a416: renamed from eth1 [ 1.796322] e1000e 0000:00:19.0 enx001e6796a417: renamed from eth0 [ 1.912013] random: crng init done [ 2.568562] EXT4-fs (dm-0): mounting ext3 file system using the ext4 subsystem [ 2.573406] EXT4-fs (dm-0): mounted filesystem 69cfce35-3ba3-4966-aeb6-bac2edd5a15e ro with ordered data mode. Quota mode: none. [ 5.913678] EXT4-fs (dm-0): re-mounted 69cfce35-3ba3-4966-aeb6-bac2edd5a15e r/w. Quota mode: none. [ 7.237111] EXT4-fs (sda1): mounting ext3 file system using the ext4 subsystem [ 7.256428] EXT4-fs (sda1): mounted filesystem 1df8e1ad-3114-44a4-b3bd-47df3e36fe7f r/w with ordered data mode. Quota mode: none. [ 7.341334] Adding 1949692k swap on /dev/mapper/italia0--vg-swap_1. Priority:-2 extents:1 across:1949692k [ 9.215286] xenbr0: port 1(enx001e6796a416) entered blocking state [ 9.215488] xenbr0: port 1(enx001e6796a416) entered disabled state [ 9.215614] e1000e 0000:02:00.0 enx001e6796a416: entered allmulticast mode [ 9.215770] e1000e 0000:02:00.0 enx001e6796a416: entered promiscuous mode [ 11.730228] e1000e 0000:02:00.0 enx001e6796a416: NIC Link is Up 1000 Mbps Full Duplex, Flow Control: None [ 11.730802] xenbr0: port 1(enx001e6796a416) entered blocking state [ 11.730924] xenbr0: port 1(enx001e6796a416) entered forwarding state