[ 0.000000] Linux version 6.1.93+ (osstest@himrod1) (gcc (Debian 12.2.0-14) 12.2.0, GNU ld (GNU Binutils for Debian) 2.40) #1 SMP PREEMPT_DYNAMIC Fri Jun 14 06:03:36 UTC 2024 [ 0.000000] Command line: placeholder root=/dev/mapper/fiano1--vg-root ro console=hvc0 [ 0.000000] Released 0 page(s) [ 0.000000] BIOS-provided physical RAM map: [ 0.000000] Xen: [mem 0x0000000000000000-0x0000000000099fff] usable [ 0.000000] Xen: [mem 0x000000000009ac00-0x00000000000fffff] reserved [ 0.000000] Xen: [mem 0x0000000000100000-0x0000000020065fff] usable [ 0.000000] Xen: [mem 0x000000007de2c000-0x000000007debafff] reserved [ 0.000000] Xen: [mem 0x000000007debb000-0x000000007dfc3fff] ACPI data [ 0.000000] Xen: [mem 0x000000007dfc4000-0x000000007e1e0fff] ACPI NVS [ 0.000000] Xen: [mem 0x000000007e1e1000-0x000000007f36afff] reserved [ 0.000000] Xen: [mem 0x000000007f36b000-0x000000007f7fffff] ACPI NVS [ 0.000000] Xen: [mem 0x0000000080000000-0x000000008fffffff] reserved [ 0.000000] Xen: [mem 0x00000000fbffc000-0x00000000fbffcfff] reserved [ 0.000000] Xen: [mem 0x00000000fec00000-0x00000000fec01fff] reserved [ 0.000000] Xen: [mem 0x00000000fed1c000-0x00000000fed3ffff] reserved [ 0.000000] Xen: [mem 0x00000000fee00000-0x00000000feefffff] reserved [ 0.000000] Xen: [mem 0x00000000ff000000-0x00000000ffffffff] reserved [ 0.000000] NX (Execute Disable) protection: active [ 0.000000] SMBIOS 2.7 present. [ 0.000000] DMI: Supermicro X9DBL-3F/X9DBL-iF/X9DBL-3F/X9DBL-iF, BIOS 3.00 12/06/2013 [ 0.000000] Hypervisor detected: Xen PV [ 0.000500] tsc: Detected 1800.001 MHz processor [ 0.001234] e820: update [mem 0x00000000-0x00000fff] usable ==> reserved [ 0.001244] e820: remove [mem 0x000a0000-0x000fffff] usable [ 0.001257] last_pfn = 0x20066 max_arch_pfn = 0x400000000 [ 0.001260] Disabled [ 0.001262] x86/PAT: MTRRs disabled, skipping PAT initialization too. [ 0.001272] x86/PAT: Configuration [0-7]: WB WT UC- UC WC WP UC UC [ 0.001368] Kernel/User page tables isolation: disabled on XEN PV. [ 0.039113] RAMDISK: [mem 0x04000000-0x0536afff] [ 0.039141] ACPI: Early table checksum verification disabled [ 0.045730] ACPI: RSDP 0x00000000000F04A0 000024 (v02 SUPERM) [ 0.045761] ACPI: XSDT 0x000000007DEF1088 00008C (v01 SUPERM SMCI--MB 00000001 AMI 00010013) [ 0.045821] ACPI: FACP 0x000000007DEFBAB0 0000F4 (v04 SUPERM SMCI--MB 00000001 AMI 00010013) [ 0.045898] ACPI: DSDT 0x000000007DEF11A0 00A910 (v02 SUPERM SMCI--MB 00000000 INTL 20091112) [ 0.045925] ACPI: FACS 0x000000007E1D8080 000040 [ 0.045952] ACPI: APIC 0x000000007DEFBBA8 000090 (v03 00000001 AMI 00010013) [ 0.045979] ACPI: FPDT 0x000000007DEFBC38 000044 (v01 00000001 AMI 00010013) [ 0.046006] ACPI: HPET 0x000000007DEFBC80 000038 (v01 SUPERM SMCI--MB 00000001 AMI. 00000005) [ 0.046032] ACPI: PRAD 0x000000007DEFBCB8 0000BE (v02 PRADID PRADTID 00000001 MSFT 04000000) [ 0.046060] ACPI: SPMI 0x000000007DEFBD78 000040 (v05 A M I OEMSPMI 00000000 AMI. 00000000) [ 0.046086] ACPI: SSDT 0x000000007DEFBDB8 0C7AE8 (v02 INTEL CpuPm 00004000 INTL 20091112) [ 0.046114] ACPI: EINJ 0x000000007DFC38A0 000130 (v01 AMI AMI EINJ 00000000 00000000) [ 0.046141] ACPI: ERST 0x000000007DFC39D0 000230 (v01 AMIER AMI ERST 00000000 00000000) [ 0.046168] ACPI: HEST 0x000000007DFC3C00 0000A8 (v01 AMI AMI HEST 00000000 00000000) [ 0.046194] ACPI: BERT 0x000000007DFC3CA8 000030 (v01 AMI AMI BERT 00000000 00000000) [ 0.046221] ACPI: RMAD 0x000000007DFC3CD8 0000B4 (v01 A M I OEMDMAR 00000001 INTL 00000001) [ 0.046248] ACPI: MCFG 0x000000007DFC3D90 00003C (v01 SUPERM SMCI--MB 00000001 MSFT 00000097) [ 0.046262] ACPI: Reserving FACP table memory at [mem 0x7defbab0-0x7defbba3] [ 0.046267] ACPI: Reserving DSDT table memory at [mem 0x7def11a0-0x7defbaaf] [ 0.046269] ACPI: Reserving FACS table memory at [mem 0x7e1d8080-0x7e1d80bf] [ 0.046270] ACPI: Reserving APIC table memory at [mem 0x7defbba8-0x7defbc37] [ 0.046271] ACPI: Reserving FPDT table memory at [mem 0x7defbc38-0x7defbc7b] [ 0.046273] ACPI: Reserving HPET table memory at [mem 0x7defbc80-0x7defbcb7] [ 0.046274] ACPI: Reserving PRAD table memory at [mem 0x7defbcb8-0x7defbd75] [ 0.046276] ACPI: Reserving SPMI table memory at [mem 0x7defbd78-0x7defbdb7] [ 0.046277] ACPI: Reserving SSDT table memory at [mem 0x7defbdb8-0x7dfc389f] [ 0.046278] ACPI: Reserving EINJ table memory at [mem 0x7dfc38a0-0x7dfc39cf] [ 0.046279] ACPI: Reserving ERST table memory at [mem 0x7dfc39d0-0x7dfc3bff] [ 0.046281] ACPI: Reserving HEST table memory at [mem 0x7dfc3c00-0x7dfc3ca7] [ 0.046282] ACPI: Reserving BERT table memory at [mem 0x7dfc3ca8-0x7dfc3cd7] [ 0.046283] ACPI: Reserving RMAD table memory at [mem 0x7dfc3cd8-0x7dfc3d8b] [ 0.046285] ACPI: Reserving MCFG table memory at [mem 0x7dfc3d90-0x7dfc3dcb] [ 0.046388] Setting APIC routing to Xen PV. [ 0.054288] Zone ranges: [ 0.054298] DMA [mem 0x0000000000001000-0x0000000000ffffff] [ 0.054304] DMA32 [mem 0x0000000001000000-0x0000000020065fff] [ 0.054306] Normal empty [ 0.054308] Movable zone start for each node [ 0.054308] Early memory node ranges [ 0.054309] node 0: [mem 0x0000000000001000-0x0000000000099fff] [ 0.054312] node 0: [mem 0x0000000000100000-0x0000000020065fff] [ 0.054316] Initmem setup node 0 [mem 0x0000000000001000-0x0000000020065fff] [ 0.054327] On node 0, zone DMA: 1 pages in unavailable ranges [ 0.054398] On node 0, zone DMA: 102 pages in unavailable ranges [ 0.058724] On node 0, zone DMA32: 32666 pages in unavailable ranges [ 0.058741] p2m virtual area at (____ptrval____), size is 40000000 [ 0.374841] Remapped 102 page(s) [ 0.377561] ACPI: PM-Timer IO Port: 0x408 [ 0.377666] ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1]) [ 0.377672] ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1]) [ 0.377675] ACPI: LAPIC_NMI (acpi_id[0x02] high edge lint[0x1]) [ 0.377677] ACPI: LAPIC_NMI (acpi_id[0x03] high edge lint[0x1]) [ 0.377724] IOAPIC[0]: apic_id 0, version 32, address 0xfec00000, GSI 0-23 [ 0.377746] IOAPIC[1]: apic_id 2, version 32, address 0xfec01000, GSI 24-47 [ 0.377766] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl) [ 0.377772] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level) [ 0.377814] ACPI: Using ACPI (MADT) for SMP configuration information [ 0.377823] ACPI: HPET id: 0x8086a701 base: 0xfed00000 [ 0.377943] smpboot: Allowing 4 CPUs, 0 hotplug CPUs [ 0.377972] PM: hibernation: Registered nosave memory: [mem 0x00000000-0x00000fff] [ 0.377976] PM: hibernation: Registered nosave memory: [mem 0x0009a000-0x0009afff] [ 0.377977] PM: hibernation: Registered nosave memory: [mem 0x0009b000-0x000fffff] [ 0.377980] [mem 0x90000000-0xfbffbfff] available for PCI devices [ 0.377989] Booting kernel on Xen [ 0.377991] Xen version: 4.19-unstable (preserve-AD) [ 0.377998] clocksource: refined-jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 1910969940391419 ns [ 0.386223] setup_percpu: NR_CPUS:64 nr_cpumask_bits:4 nr_cpu_ids:4 nr_node_ids:1 [ 0.386830] percpu: Embedded 54 pages/cpu s180520 r8192 d32472 u524288 [ 0.386840] pcpu-alloc: s180520 r8192 d32472 u524288 alloc=1*2097152 [ 0.386847] pcpu-alloc: [0] 0 1 2 3 [ 0.386992] xen: PV spinlocks enabled [ 0.386998] PV qspinlock hash table entries: 256 (order: 0, 4096 bytes, linear) [ 0.387007] Built 1 zonelists, mobility grouping on. Total pages: 129006 [ 0.387012] Kernel command line: placeholder root=/dev/mapper/fiano1--vg-root ro console=hvc0 [ 0.387087] Unknown kernel command line parameters "placeholder", will be passed to user space. [ 0.387105] random: crng init done [ 0.387225] Dentry cache hash table entries: 65536 (order: 7, 524288 bytes, linear) [ 0.387287] Inode-cache hash table entries: 32768 (order: 6, 262144 bytes, linear) [ 0.388523] mem auto-init: stack:all(zero), heap alloc:off, heap free:off [ 0.388537] software IO TLB: area num 4. [ 0.505279] Memory: 390896K/524284K available (14349K kernel code, 2682K rwdata, 4576K rodata, 1580K init, 1296K bss, 133136K reserved, 0K cma-reserved) [ 0.505573] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1 [ 0.509037] Dynamic Preempt: voluntary [ 0.509177] rcu: Preemptible hierarchical RCU implementation. [ 0.509179] rcu: RCU event tracing is enabled. [ 0.509180] rcu: RCU restricting CPUs from NR_CPUS=64 to nr_cpu_ids=4. [ 0.509182] Trampoline variant of Tasks RCU enabled. [ 0.509183] rcu: RCU calculated value of scheduler-enlistment delay is 100 jiffies. [ 0.509185] rcu: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=4 [ 0.527460] NR_IRQS: 4352, nr_irqs: 864, preallocated irqs: 16 [ 0.527659] xen:events: Using FIFO-based ABI [ 0.527698] xen: --> pirq=1 -> irq=1 (gsi=1) [ 0.527714] xen: --> pirq=2 -> irq=2 (gsi=2) [ 0.527732] xen: --> pirq=3 -> irq=3 (gsi=3) [ 0.527746] xen: --> pirq=4 -> irq=4 (gsi=4) [ 0.527760] xen: --> pirq=5 -> irq=5 (gsi=5) [ 0.527773] xen: --> pirq=6 -> irq=6 (gsi=6) [ 0.527787] xen: --> pirq=7 -> irq=7 (gsi=7) [ 0.527801] xen: --> pirq=8 -> irq=8 (gsi=8) [ 0.527814] xen: --> pirq=9 -> irq=9 (gsi=9) [ 0.527828] xen: --> pirq=10 -> irq=10 (gsi=10) [ 0.527842] xen: --> pirq=11 -> irq=11 (gsi=11) [ 0.527856] xen: --> pirq=12 -> irq=12 (gsi=12) [ 0.527870] xen: --> pirq=13 -> irq=13 (gsi=13) [ 0.527884] xen: --> pirq=14 -> irq=14 (gsi=14) [ 0.527898] xen: --> pirq=15 -> irq=15 (gsi=15) [ 0.527915] rcu: srcu_init: Setting srcu_struct sizes based on contention. [ 0.532922] Console: colour VGA+ 80x25 [ 0.548057] printk: console [tty0] enabled [ 0.549863] printk: console [hvc0] enabled [ 0.550006] ACPI: Core revision 20220331 [ 0.633003] clocksource: xen: mask: 0xffffffffffffffff max_cycles: 0x1cd42e4dffb, max_idle_ns: 881590591483 ns [ 0.633186] Xen: using vcpuop timer interface [ 0.633195] installing Xen timer for CPU 0 [ 0.633381] clocksource: tsc-early: mask: 0xffffffffffffffff max_cycles: 0x19f22aa45f0, max_idle_ns: 440795269146 ns [ 0.633563] Calibrating delay loop (skipped), value calculated using timer frequency.. 3600.00 BogoMIPS (lpj=1800001) [ 0.634002] Last level iTLB entries: 4KB 512, 2MB 8, 4MB 8 [ 0.634141] Last level dTLB entries: 4KB 512, 2MB 0, 4MB 0, 1GB 4 [ 0.634300] Spectre V1 : Mitigation: usercopy/swapgs barriers and __user pointer sanitization [ 0.634575] Spectre V2 : Mitigation: Retpolines [ 0.634709] Spectre V2 : Spectre v2 / SpectreRSB mitigation: Filling RSB on context switch [ 0.634873] Spectre V2 : Spectre v2 / SpectreRSB : Filling RSB on VMEXIT [ 0.635012] Spectre V2 : Enabling Restricted Speculation for firmware calls [ 0.635154] Spectre V2 : mitigation: Enabling conditional Indirect Branch Prediction Barrier [ 0.635321] Spectre V2 : User space: Mitigation: STIBP via prctl [ 0.635460] Speculative Store Bypass: Mitigation: Speculative Store Bypass disabled via prctl [ 0.635571] MDS: Mitigation: Clear CPU buffers [ 0.635709] MMIO Stale Data: Unknown: No mitigations [ 0.635875] x86/fpu: Supporting XSAVE feature 0x001: 'x87 floating point registers' [ 0.636039] x86/fpu: Supporting XSAVE feature 0x002: 'SSE registers' [ 0.636178] x86/fpu: Supporting XSAVE feature 0x004: 'AVX registers' [ 0.636318] x86/fpu: xstate_offset[2]: 576, xstate_sizes[2]: 256 [ 0.636458] x86/fpu: Enabled xstate features 0x7, context size is 832 bytes, using 'standard' format. [ 0.659981] Freeing SMP alternatives memory: 40K [ 0.660129] pid_max: default: 32768 minimum: 301 [ 0.660288] LSM: Security Framework initializing [ 0.660433] SELinux: Initializing. [ 0.660605] Mount-cache hash table entries: 1024 (order: 1, 8192 bytes, linear) [ 0.660775] Mountpoint-cache hash table entries: 1024 (order: 1, 8192 bytes, linear) [ 0.661559] cpu 0 spinlock event irq 49 [ 0.661740] VPMU disabled by hypervisor. [ 0.662507] cblist_init_generic: Setting adjustable number of callback queues. [ 0.662569] cblist_init_generic: Setting shift to 2 and lim to 1. [ 0.662788] Performance Events: unsupported p6 CPU model 62 no PMU driver, software events only. [ 0.662968] signal: max sigframe size: 1776 [ 0.663197] rcu: Hierarchical SRCU implementation. [ 0.663335] rcu: Max phase no-delay instances is 400. [ 0.664006] smp: Bringing up secondary CPUs ... [ 0.664544] installing Xen timer for CPU 1 [ 0.665149] cpu 1 spinlock event irq 59 [ 0.666598] MDS CPU bug present and SMT on, data leak possible. See https://www.kernel.org/doc/html/latest/admin-guide/hw-vuln/mds.html for more details. [ 0.667226] installing Xen timer for CPU 2 [ 0.667897] cpu 2 spinlock event irq 65 [ 0.668576] installing Xen timer for CPU 3 [ 0.669273] cpu 3 spinlock event irq 71 [ 0.669691] smp: Brought up 1 node, 4 CPUs [ 0.669830] smpboot: Max logical packages: 1 [ 0.670086] devtmpfs: initialized [ 0.670588] x86/mm: Memory block size: 128MB [ 0.670981] ACPI: PM: Registering ACPI NVS region [mem 0x7dfc4000-0x7e1e0fff] (2215936 bytes) [ 0.670981] ACPI: PM: Registering ACPI NVS region [mem 0x7f36b000-0x7f7fffff] (4804608 bytes) [ 0.671697] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 1911260446275000 ns [ 0.671877] futex hash table entries: 1024 (order: 4, 65536 bytes, linear) [ 0.672189] PM: RTC time: 07:58:56, date: 2024-06-14 [ 0.672462] NET: Registered PF_NETLINK/PF_ROUTE protocol family [ 0.672600] xen:grant_table: Grant tables using version 1 layout [ 0.672770] Grant table initialized [ 0.673076] audit: initializing netlink subsys (disabled) [ 0.673246] audit: type=2000 audit(1718351936.515:1): state=initialized audit_enabled=0 res=1 [ 0.673640] thermal_sys: Registered thermal governor 'step_wise' [ 0.673643] thermal_sys: Registered thermal governor 'user_space' [ 0.673844] ACPI FADT declares the system doesn't support PCIe ASPM, so disable it [ 0.674361] PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0x80000000-0x8fffffff] (base 0x80000000) [ 0.674583] PCI: MMCONFIG at [mem 0x80000000-0x8fffffff] reserved in E820 [ 0.909737] PCI: Using configuration type 1 for base access [ 0.913156] kprobes: kprobe jump-optimization is enabled. All kprobes are optimized if possible. [ 0.913664] ACPI: Added _OSI(Module Device) [ 0.913772] ACPI: Added _OSI(Processor Device) [ 0.914573] ACPI: Added _OSI(3.0 _SCP Extensions) [ 0.914709] ACPI: Added _OSI(Processor Aggregator Device) [ 1.093287] ACPI: 2 ACPI AML tables successfully acquired and loaded [ 1.108457] xen: registering gsi 9 triggering 0 polarity 0 [ 1.114887] ACPI: Interpreter enabled [ 1.115057] ACPI: PM: (supports S0 S1 S4 S5) [ 1.115194] ACPI: Using IOAPIC for interrupt routing [ 1.115382] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug [ 1.115554] PCI: Using E820 reservations for host bridge windows [ 1.116241] ACPI: Enabled 5 GPEs in block 00 to 3F [ 1.137913] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-fe]) [ 1.138073] acpi PNP0A08:00: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI HPX-Type3] [ 1.138376] acpi PNP0A08:00: _OSC: platform does not support [PME LTR] [ 1.138760] acpi PNP0A08:00: _OSC: OS now controls [PCIeCapability] [ 1.138904] acpi PNP0A08:00: FADT indicates ASPM is unsupported, using BIOS configuration [ 1.139388] PCI host bridge to bus 0000:00 [ 1.139526] pci_bus 0000:00: root bus resource [io 0x0000-0x03af window] [ 1.139570] pci_bus 0000:00: root bus resource [io 0x03e0-0x0cf7 window] [ 1.139713] pci_bus 0000:00: root bus resource [io 0x03b0-0x03df window] [ 1.139854] pci_bus 0000:00: root bus resource [io 0x0d00-0xffff window] [ 1.139996] pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000dffff window] [ 1.140160] pci_bus 0000:00: root bus resource [mem 0xfed08000-0xfed08fff window] [ 1.140324] pci_bus 0000:00: root bus resource [mem 0xfed0e000-0xfed0ffff window] [ 1.140492] pci_bus 0000:00: root bus resource [mem 0x80000000-0xfbffffff window] [ 1.140570] pci_bus 0000:00: root bus resource [bus 00-fe] [ 1.140806] pci 0000:00:00.0: [8086:0e00] type 00 class 0x060000 [ 1.141465] pci 0000:00:00.0: PME# supported from D0 D3hot D3cold [ 1.141890] pci 0000:00:01.0: [8086:0e02] type 01 class 0x060400 [ 1.142678] pci 0000:00:01.0: PME# supported from D0 D3hot D3cold [ 1.143249] pci 0000:00:01.1: [8086:0e03] type 01 class 0x060400 [ 1.144037] pci 0000:00:01.1: PME# supported from D0 D3hot D3cold [ 1.144618] pci 0000:00:03.0: [8086:0e08] type 01 class 0x060400 [ 1.145072] pci 0000:00:03.0: enabling Extended Tags [ 1.145578] pci 0000:00:03.0: PME# supported from D0 D3hot D3cold [ 1.146129] pci 0000:00:04.0: [8086:0e20] type 00 class 0x088000 [ 1.146403] pci 0000:00:04.0: reg 0x10: [mem 0xfbb1c000-0xfbb1ffff 64bit] [ 1.147356] pci 0000:00:04.1: [8086:0e21] type 00 class 0x088000 [ 1.147631] pci 0000:00:04.1: reg 0x10: [mem 0xfbb18000-0xfbb1bfff 64bit] [ 1.148581] pci 0000:00:04.2: [8086:0e22] type 00 class 0x088000 [ 1.148854] pci 0000:00:04.2: reg 0x10: [mem 0xfbb14000-0xfbb17fff 64bit] [ 1.149801] pci 0000:00:04.3: [8086:0e23] type 00 class 0x088000 [ 1.150079] pci 0000:00:04.3: reg 0x10: [mem 0xfbb10000-0xfbb13fff 64bit] [ 1.151028] pci 0000:00:04.4: [8086:0e24] type 00 class 0x088000 [ 1.151300] pci 0000:00:04.4: reg 0x10: [mem 0xfbb0c000-0xfbb0ffff 64bit] [ 1.152253] pci 0000:00:04.5: [8086:0e25] type 00 class 0x088000 [ 1.152525] pci 0000:00:04.5: reg 0x10: [mem 0xfbb08000-0xfbb0bfff 64bit] [ 1.153375] pci 0000:00:04.6: [8086:0e26] type 00 class 0x088000 [ 1.153653] pci 0000:00:04.6: reg 0x10: [mem 0xfbb04000-0xfbb07fff 64bit] [ 1.154600] pci 0000:00:04.7: [8086:0e27] type 00 class 0x088000 [ 1.154872] pci 0000:00:04.7: reg 0x10: [mem 0xfbb00000-0xfbb03fff 64bit] [ 1.155816] pci 0000:00:05.0: [8086:0e28] type 00 class 0x088000 [ 1.156664] pci 0000:00:05.2: [8086:0e2a] type 00 class 0x088000 [ 1.157516] pci 0000:00:05.4: [8086:0e2c] type 00 class 0x080020 [ 1.157663] pci 0000:00:05.4: reg 0x10: [mem 0xfbb25000-0xfbb25fff] [ 1.158703] pci 0000:00:11.0: [8086:1d3e] type 01 class 0x060400 [ 1.159502] pci 0000:00:11.0: PME# supported from D0 D3hot D3cold [ 1.159961] pci 0000:00:16.0: [8086:1d3a] type 00 class 0x078000 [ 1.160237] pci 0000:00:16.0: reg 0x10: [mem 0xfed0e000-0xfed0e00f 64bit] [ 1.160877] pci 0000:00:16.0: PME# supported from D0 D3hot D3cold [ 1.161303] pci 0000:00:16.1: [8086:1d3b] type 00 class 0x078000 [ 1.161577] pci 0000:00:16.1: reg 0x10: [mem 0xfed0f000-0xfed0f00f 64bit] [ 1.162223] pci 0000:00:16.1: PME# supported from D0 D3hot D3cold [ 1.162747] pci 0000:00:1a.0: [8086:1d2d] type 00 class 0x0c0320 [ 1.162994] pci 0000:00:1a.0: reg 0x10: [mem 0xfbb23000-0xfbb233ff] [ 1.163721] pci 0000:00:1a.0: PME# supported from D0 D3hot D3cold [ 1.164174] pci 0000:00:1c.0: [8086:1d10] type 01 class 0x060400 [ 1.164963] pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold [ 1.165236] pci 0000:00:1c.0: Enabling MPC IRBNCE [ 1.165381] pci 0000:00:1c.0: Intel PCH root port ACS workaround enabled [ 1.165770] pci 0000:00:1c.1: [8086:1d12] type 01 class 0x060400 [ 1.166554] pci 0000:00:1c.1: PME# supported from D0 D3hot D3cold [ 1.166820] pci 0000:00:1c.1: Enabling MPC IRBNCE [ 1.166965] pci 0000:00:1c.1: Intel PCH root port ACS workaround enabled [ 1.167430] pci 0000:00:1d.0: [8086:1d26] type 00 class 0x0c0320 [ 1.167674] pci 0000:00:1d.0: reg 0x10: [mem 0xfbb22000-0xfbb223ff] [ 1.168400] pci 0000:00:1d.0: PME# supported from D0 D3hot D3cold [ 1.168850] pci 0000:00:1e.0: [8086:244e] type 01 class 0x060401 [ 1.169662] pci 0000:00:1f.0: [8086:1d41] type 00 class 0x060100 [ 1.170715] pci 0000:00:1f.2: [8086:1d02] type 00 class 0x010601 [ 1.170958] pci 0000:00:1f.2: reg 0x10: [io 0xf050-0xf057] [ 1.171150] pci 0000:00:1f.2: reg 0x14: [io 0xf040-0xf043] [ 1.171342] pci 0000:00:1f.2: reg 0x18: [io 0xf030-0xf037] [ 1.171538] pci 0000:00:1f.2: reg 0x1c: [io 0xf020-0xf023] [ 1.171623] pci 0000:00:1f.2: reg 0x20: [io 0xf000-0xf01f] [ 1.171815] pci 0000:00:1f.2: reg 0x24: [mem 0xfbb21000-0xfbb217ff] [ 1.172295] pci 0000:00:1f.2: PME# supported from D3hot [ 1.172713] pci 0000:00:1f.3: [8086:1d22] type 00 class 0x0c0500 [ 1.172986] pci 0000:00:1f.3: reg 0x10: [mem 0xfbb20000-0xfbb200ff 64bit] [ 1.173288] pci 0000:00:1f.3: reg 0x20: [io 0x1180-0x119f] [ 1.173778] pci 0000:00:1f.6: [8086:1d24] type 00 class 0x118000 [ 1.174054] pci 0000:00:1f.6: reg 0x10: [mem 0xfed08000-0xfed08fff 64bit] [ 1.175034] pci 0000:00:01.0: PCI bridge to [bus 01] [ 1.175469] pci 0000:00:01.1: PCI bridge to [bus 02] [ 1.175867] pci 0000:00:03.0: PCI bridge to [bus 03] [ 1.176378] pci 0000:04:00.0: [8086:1d6b] type 00 class 0x010700 [ 1.176658] pci 0000:04:00.0: reg 0x10: [mem 0xfa47c000-0xfa47ffff 64bit pref] [ 1.176914] pci 0000:04:00.0: reg 0x18: [mem 0xfa000000-0xfa3fffff 64bit pref] [ 1.177133] pci 0000:04:00.0: reg 0x20: [io 0xe000-0xe0ff] [ 1.177431] pci 0000:04:00.0: enabling Extended Tags [ 1.178027] pci 0000:04:00.0: reg 0x164: [mem 0xfa400000-0xfa403fff 64bit pref] [ 1.178196] pci 0000:04:00.0: VF(n) BAR0 space: [mem 0xfa400000-0xfa47bfff 64bit pref] (contains BAR0 for 31 VFs) [ 1.179076] pci 0000:00:11.0: PCI bridge to [bus 04] [ 1.179230] pci 0000:00:11.0: bridge window [io 0xe000-0xefff] [ 1.179419] pci 0000:00:11.0: bridge window [mem 0xfa000000-0xfa4fffff 64bit pref] [ 1.179909] pci 0000:05:00.0: [8086:10d3] type 00 class 0x020000 [ 1.180173] pci 0000:05:00.0: reg 0x10: [mem 0xfba00000-0xfba1ffff] [ 1.180445] pci 0000:05:00.0: reg 0x18: [io 0xd000-0xd01f] [ 1.180636] pci 0000:05:00.0: reg 0x1c: [mem 0xfba20000-0xfba23fff] [ 1.181373] pci 0000:05:00.0: PME# supported from D0 D3hot D3cold [ 1.182024] pci 0000:00:1c.0: PCI bridge to [bus 05] [ 1.182181] pci 0000:00:1c.0: bridge window [io 0xd000-0xdfff] [ 1.182347] pci 0000:00:1c.0: bridge window [mem 0xfba00000-0xfbafffff] [ 1.182863] pci 0000:06:00.0: [8086:10d3] type 00 class 0x020000 [ 1.183127] pci 0000:06:00.0: reg 0x10: [mem 0xfb900000-0xfb91ffff] [ 1.183398] pci 0000:06:00.0: reg 0x18: [io 0xc000-0xc01f] [ 1.183607] pci 0000:06:00.0: reg 0x1c: [mem 0xfb920000-0xfb923fff] [ 1.184342] pci 0000:06:00.0: PME# supported from D0 D3hot D3cold [ 1.184989] pci 0000:00:1c.1: PCI bridge to [bus 06] [ 1.185143] pci 0000:00:1c.1: bridge window [io 0xc000-0xcfff] [ 1.185299] pci 0000:00:1c.1: bridge window [mem 0xfb900000-0xfb9fffff] [ 1.185601] pci_bus 0000:07: extended config space not accessible [ 1.185820] pci 0000:07:01.0: [102b:0532] type 00 class 0x030000 [ 1.186065] pci 0000:07:01.0: reg 0x10: [mem 0xf9000000-0xf9ffffff pref] [ 1.186262] pci 0000:07:01.0: reg 0x14: [mem 0xfb800000-0xfb803fff] [ 1.186489] pci 0000:07:01.0: reg 0x18: [mem 0xfb000000-0xfb7fffff] [ 1.186846] pci 0000:07:01.0: Video device with shadowed ROM at [mem 0x000c0000-0x000dffff] [ 1.187537] pci 0000:00:1e.0: PCI bridge to [bus 07] (subtractive decode) [ 1.187602] pci 0000:00:1e.0: bridge window [mem 0xfb000000-0xfb8fffff] [ 1.187775] pci 0000:00:1e.0: bridge window [mem 0xf9000000-0xf9ffffff 64bit pref] [ 1.187940] pci 0000:00:1e.0: bridge window [io 0x0000-0x03af window] (subtractive decode) [ 1.188569] pci 0000:00:1e.0: bridge window [io 0x03e0-0x0cf7 window] (subtractive decode) [ 1.188738] pci 0000:00:1e.0: bridge window [io 0x03b0-0x03df window] (subtractive decode) [ 1.188906] pci 0000:00:1e.0: bridge window [io 0x0d00-0xffff window] (subtractive decode) [ 1.189073] pci 0000:00:1e.0: bridge window [mem 0x000a0000-0x000dffff window] (subtractive decode) [ 1.189242] pci 0000:00:1e.0: bridge window [mem 0xfed08000-0xfed08fff window] (subtractive decode) [ 1.189413] pci 0000:00:1e.0: bridge window [mem 0xfed0e000-0xfed0ffff window] (subtractive decode) [ 1.189569] pci 0000:00:1e.0: bridge window [mem 0x80000000-0xfbffffff window] (subtractive decode) [ 1.190065] pci_bus 0000:00: on NUMA node 0 [ 1.190214] xen: registering gsi 13 triggering 1 polarity 0 [ 1.190986] ACPI: PCI Root Bridge [UNC0] (domain 0000 [bus ff]) [ 1.191138] acpi PNP0A03:00: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI HPX-Type3] [ 1.191328] acpi PNP0A03:00: _OSC: OS now controls [PME PCIeCapability LTR] [ 1.191471] acpi PNP0A03:00: FADT indicates ASPM is unsupported, using BIOS configuration [ 1.191649] PCI host bridge to bus 0000:ff [ 1.191786] pci_bus 0000:ff: root bus resource [bus ff] [ 1.192029] pci 0000:ff:08.0: [8086:0e80] type 00 class 0x088000 [ 1.192728] pci 0000:ff:09.0: [8086:0e90] type 00 class 0x088000 [ 1.193385] pci 0000:ff:0a.0: [8086:0ec0] type 00 class 0x088000 [ 1.194020] pci 0000:ff:0a.1: [8086:0ec1] type 00 class 0x088000 [ 1.194619] pci 0000:ff:0a.2: [8086:0ec2] type 00 class 0x088000 [ 1.195226] pci 0000:ff:0a.3: [8086:0ec3] type 00 class 0x088000 [ 1.195856] pci 0000:ff:0b.0: [8086:0e1e] type 00 class 0x088000 [ 1.196473] pci 0000:ff:0b.3: [8086:0e1f] type 00 class 0x088000 [ 1.197053] pci 0000:ff:0c.0: [8086:0ee0] type 00 class 0x088000 [ 1.197657] pci 0000:ff:0c.1: [8086:0ee2] type 00 class 0x088000 [ 1.198296] pci 0000:ff:0d.0: [8086:0ee1] type 00 class 0x088000 [ 1.198896] pci 0000:ff:0d.1: [8086:0ee3] type 00 class 0x088000 [ 1.199535] pci 0000:ff:0e.0: [8086:0ea0] type 00 class 0x088000 [ 1.200031] pci 0000:ff:0e.1: [8086:0e30] type 00 class 0x110100 [ 1.200726] pci 0000:ff:0f.0: [8086:0ea8] type 00 class 0x088000 [ 1.201513] pci 0000:ff:0f.1: [8086:0e71] type 00 class 0x088000 [ 1.202217] pci 0000:ff:0f.2: [8086:0eaa] type 00 class 0x088000 [ 1.203006] pci 0000:ff:0f.3: [8086:0eab] type 00 class 0x088000 [ 1.203794] pci 0000:ff:0f.4: [8086:0eac] type 00 class 0x088000 [ 1.204580] pci 0000:ff:0f.5: [8086:0ead] type 00 class 0x088000 [ 1.205386] pci 0000:ff:10.0: [8086:0eb0] type 00 class 0x088000 [ 1.206193] pci 0000:ff:10.1: [8086:0eb1] type 00 class 0x088000 [ 1.206985] pci 0000:ff:10.2: [8086:0eb2] type 00 class 0x088000 [ 1.207779] pci 0000:ff:10.3: [8086:0eb3] type 00 class 0x088000 [ 1.208570] pci 0000:ff:10.4: [8086:0eb4] type 00 class 0x088000 [ 1.209358] pci 0000:ff:10.5: [8086:0eb5] type 00 class 0x088000 [ 1.210149] pci 0000:ff:10.6: [8086:0eb6] type 00 class 0x088000 [ 1.210940] pci 0000:ff:10.7: [8086:0eb7] type 00 class 0x088000 [ 1.211719] pci 0000:ff:13.0: [8086:0e1d] type 00 class 0x088000 [ 1.212314] pci 0000:ff:13.1: [8086:0e34] type 00 class 0x110100 [ 1.212934] pci 0000:ff:13.4: [8086:0e81] type 00 class 0x088000 [ 1.213530] pci 0000:ff:13.5: [8086:0e36] type 00 class 0x110100 [ 1.214059] pci 0000:ff:16.0: [8086:0ec8] type 00 class 0x088000 [ 1.214659] pci 0000:ff:16.1: [8086:0ec9] type 00 class 0x088000 [ 1.215255] pci 0000:ff:16.2: [8086:0eca] type 00 class 0x088000 [ 1.215934] pci_bus 0000:ff: on NUMA node 0 [ 1.216125] ACPI: PCI: Interrupt link LNKA configured for IRQ 11 [ 1.216376] ACPI: PCI: Interrupt link LNKB configured for IRQ 10 [ 1.216635] ACPI: PCI: Interrupt link LNKC configured for IRQ 5 [ 1.216882] ACPI: PCI: Interrupt link LNKD configured for IRQ 11 [ 1.217128] ACPI: PCI: Interrupt link LNKE configured for IRQ 0 [ 1.217373] ACPI: PCI: Interrupt link LNKF configured for IRQ 0 [ 1.217621] ACPI: PCI: Interrupt link LNKG configured for IRQ 0 [ 1.217887] ACPI: PCI: Interrupt link LNKH configured for IRQ 7 [ 1.219871] xen:balloon: Initialising balloon driver [ 1.220041] iommu: Default domain type: Translated [ 1.220041] iommu: DMA domain TLB invalidation policy: lazy mode [ 1.220660] SCSI subsystem initialized [ 1.220821] libata version 3.00 loaded. [ 1.220821] ACPI: bus type USB registered [ 1.220821] usbcore: registered new interface driver usbfs [ 1.220940] usbcore: registered new interface driver hub [ 1.221086] usbcore: registered new device driver usb [ 1.221592] pps_core: LinuxPPS API ver. 1 registered [ 1.221733] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti [ 1.221906] PTP clock support registered [ 1.222078] Advanced Linux Sound Architecture Driver Initialized. [ 1.222597] NetLabel: Initializing [ 1.222731] NetLabel: domain hash size = 128 [ 1.222864] NetLabel: protocols = UNLABELED CIPSOv4 CALIPSO [ 1.223025] NetLabel: unlabeled traffic allowed by default [ 1.223208] PCI: Using ACPI for IRQ routing [ 1.282770] PCI: pci_cache_line_size set to 64 bytes [ 1.283798] e820: reserve RAM buffer [mem 0x0009a000-0x0009ffff] [ 1.283802] e820: reserve RAM buffer [mem 0x20066000-0x23ffffff] [ 1.283842] pci 0000:07:01.0: vgaarb: setting as boot VGA device [ 1.283842] pci 0000:07:01.0: vgaarb: bridge control possible [ 1.283890] pci 0000:07:01.0: vgaarb: VGA device added: decodes=io+mem,owns=io+mem,locks=none [ 1.284064] vgaarb: loaded [ 1.286560] clocksource: Switched to clocksource tsc-early [ 1.286560] VFS: Disk quotas dquot_6.6.0 [ 1.286560] VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes) [ 1.286560] hugetlbfs: disabling because there are no supported hugepage sizes [ 1.286560] pnp: PnP ACPI init [ 1.286587] system 00:00: [mem 0xfc000000-0xfcffffff] has been reserved [ 1.286587] system 00:00: [mem 0xfd000000-0xfdffffff] has been reserved [ 1.286587] system 00:00: [mem 0xfe000000-0xfeafffff] has been reserved [ 1.286587] system 00:00: [mem 0xfeb00000-0xfebfffff] has been reserved [ 1.286587] system 00:01: [mem 0xfbffc000-0xfbffdfff] could not be reserved [ 1.286587] xen: registering gsi 8 triggering 1 polarity 0 [ 1.287666] system 00:03: [io 0x04d0-0x04d1] has been reserved [ 1.287817] system 00:03: [mem 0x00000400-0x000004ff] could not be reserved [ 1.288140] xen: registering gsi 12 triggering 1 polarity 0 [ 1.288378] system 00:06: [io 0x0b00-0x0b7f] has been reserved [ 1.288882] xen: registering gsi 4 triggering 1 polarity 0 [ 1.288889] Already setup the GSI :4 [ 1.289024] pnp 00:07: [dma 0 disabled] [ 1.289396] xen: registering gsi 3 triggering 1 polarity 0 [ 1.289412] pnp 00:08: [dma 0 disabled] [ 1.289894] system 00:09: [io 0x0400-0x0453] has been reserved [ 1.290042] system 00:09: [io 0x0458-0x047f] has been reserved [ 1.290183] system 00:09: [io 0x1180-0x119f] has been reserved [ 1.290323] system 00:09: [io 0x0500-0x057f] has been reserved [ 1.290464] system 00:09: [mem 0xfed1c000-0xfed1ffff] has been reserved [ 1.290631] system 00:09: [mem 0xfec00000-0xfecfffff] could not be reserved [ 1.290775] system 00:09: [mem 0xff000000-0xffffffff] has been reserved [ 1.291038] system 00:0a: [io 0x0454-0x0457] has been reserved [ 1.291604] system 00:0b: [mem 0x00000000-0x0009ffff] could not be reserved [ 1.292003] pnp: PnP ACPI: found 12 devices [ 1.341030] PM-Timer failed consistency check (0xffffff) - aborting. [ 1.341277] NET: Registered PF_INET protocol family [ 1.341487] IP idents hash table entries: 8192 (order: 4, 65536 bytes, linear) [ 1.341984] tcp_listen_portaddr_hash hash table entries: 256 (order: 0, 4096 bytes, linear) [ 1.342160] Table-perturb hash table entries: 65536 (order: 6, 262144 bytes, linear) [ 1.342327] TCP established hash table entries: 4096 (order: 3, 32768 bytes, linear) [ 1.342502] TCP bind hash table entries: 4096 (order: 5, 131072 bytes, linear) [ 1.342728] TCP: Hash tables configured (established 4096 bind 4096) [ 1.342941] UDP hash table entries: 256 (order: 1, 8192 bytes, linear) [ 1.343091] UDP-Lite hash table entries: 256 (order: 1, 8192 bytes, linear) [ 1.343323] NET: Registered PF_UNIX/PF_LOCAL protocol family [ 1.343844] RPC: Registered named UNIX socket transport module. [ 1.343997] RPC: Registered udp transport module. [ 1.344131] RPC: Registered tcp transport module. [ 1.344266] RPC: Registered tcp NFSv4.1 backchannel transport module. [ 1.344914] pci 0000:00:01.0: PCI bridge to [bus 01] [ 1.345127] pci 0000:00:01.1: PCI bridge to [bus 02] [ 1.345331] pci 0000:00:03.0: PCI bridge to [bus 03] [ 1.345536] pci 0000:00:11.0: PCI bridge to [bus 04] [ 1.345702] pci 0000:00:11.0: bridge window [io 0xe000-0xefff] [ 1.345884] pci 0000:00:11.0: bridge window [mem 0xfa000000-0xfa4fffff 64bit pref] [ 1.346084] pci 0000:00:1c.0: PCI bridge to [bus 05] [ 1.346228] pci 0000:00:1c.0: bridge window [io 0xd000-0xdfff] [ 1.346391] pci 0000:00:1c.0: bridge window [mem 0xfba00000-0xfbafffff] [ 1.346597] pci 0000:00:1c.1: PCI bridge to [bus 06] [ 1.346741] pci 0000:00:1c.1: bridge window [io 0xc000-0xcfff] [ 1.346905] pci 0000:00:1c.1: bridge window [mem 0xfb900000-0xfb9fffff] [ 1.347094] pci 0000:00:1e.0: PCI bridge to [bus 07] [ 1.347253] pci 0000:00:1e.0: bridge window [mem 0xfb000000-0xfb8fffff] [ 1.347410] pci 0000:00:1e.0: bridge window [mem 0xf9000000-0xf9ffffff 64bit pref] [ 1.347655] pci_bus 0000:00: resource 4 [io 0x0000-0x03af window] [ 1.347796] pci_bus 0000:00: resource 5 [io 0x03e0-0x0cf7 window] [ 1.347936] pci_bus 0000:00: resource 6 [io 0x03b0-0x03df window] [ 1.348076] pci_bus 0000:00: resource 7 [io 0x0d00-0xffff window] [ 1.348216] pci_bus 0000:00: resource 8 [mem 0x000a0000-0x000dffff window] [ 1.348358] pci_bus 0000:00: resource 9 [mem 0xfed08000-0xfed08fff window] [ 1.348499] pci_bus 0000:00: resource 10 [mem 0xfed0e000-0xfed0ffff window] [ 1.348656] pci_bus 0000:00: resource 11 [mem 0x80000000-0xfbffffff window] [ 1.348800] pci_bus 0000:04: resource 0 [io 0xe000-0xefff] [ 1.348969] pci_bus 0000:04: resource 2 [mem 0xfa000000-0xfa4fffff 64bit pref] [ 1.349132] pci_bus 0000:05: resource 0 [io 0xd000-0xdfff] [ 1.349269] pci_bus 0000:05: resource 1 [mem 0xfba00000-0xfbafffff] [ 1.349409] pci_bus 0000:06: resource 0 [io 0xc000-0xcfff] [ 1.349546] pci_bus 0000:06: resource 1 [mem 0xfb900000-0xfb9fffff] [ 1.349703] pci_bus 0000:07: resource 1 [mem 0xfb000000-0xfb8fffff] [ 1.349844] pci_bus 0000:07: resource 2 [mem 0xf9000000-0xf9ffffff 64bit pref] [ 1.350007] pci_bus 0000:07: resource 4 [io 0x0000-0x03af window] [ 1.350146] pci_bus 0000:07: resource 5 [io 0x03e0-0x0cf7 window] [ 1.350291] pci_bus 0000:07: resource 6 [io 0x03b0-0x03df window] [ 1.350431] pci_bus 0000:07: resource 7 [io 0x0d00-0xffff window] [ 1.350588] pci_bus 0000:07: resource 8 [mem 0x000a0000-0x000dffff window] [ 1.350730] pci_bus 0000:07: resource 9 [mem 0xfed08000-0xfed08fff window] [ 1.350871] pci_bus 0000:07: resource 10 [mem 0xfed0e000-0xfed0ffff window] [ 1.351013] pci_bus 0000:07: resource 11 [mem 0x80000000-0xfbffffff window] [ 1.351346] pci 0000:00:05.0: disabled boot interrupts on device [8086:0e28] [ 1.351672] xen: registering gsi 16 triggering 0 polarity 1 [ 1.351713] xen: --> pirq=16 -> irq=16 (gsi=16) [ 1.368781] pci 0000:00:1a.0: quirk_usb_early_handoff+0x0/0x720 took 16823 usecs [ 1.374493] xen: registering gsi 23 triggering 0 polarity 1 [ 1.374529] xen: --> pirq=23 -> irq=23 (gsi=23) [ 1.390780] pci 0000:00:1d.0: quirk_usb_early_handoff+0x0/0x720 took 15982 usecs [ 1.391375] PCI: CLS 64 bytes, default 64 [ 1.391524] PCI-DMA: Using software bounce buffering for IO (SWIOTLB) [ 1.391620] Unpacking initramfs... [ 1.391685] software IO TLB: mapped [mem 0x000000001b180000-0x000000001f180000] (64MB) [ 1.392096] kvm: no hardware support for 'kvm_intel' [ 1.392236] has_svm: not amd or hygon [ 1.392367] kvm: no hardware support for 'kvm_amd' [ 1.392513] clocksource: tsc: mask: 0xffffffffffffffff max_cycles: 0x19f22aa45f0, max_idle_ns: 440795269146 ns [ 1.392776] clocksource: Switched to clocksource tsc [ 1.400744] Initialise system trusted keyrings [ 1.401091] workingset: timestamp_bits=62 max_order=17 bucket_order=0 [ 1.403071] NFS: Registering the id_resolver key type [ 1.403221] Key type id_resolver registered [ 1.403354] Key type id_legacy registered [ 1.403583] 9p: Installing v9fs 9p2000 file system support [ 1.421513] Key type asymmetric registered [ 1.421684] Asymmetric key parser 'x509' registered [ 1.421898] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 251) [ 1.422077] io scheduler mq-deadline registered [ 1.422213] io scheduler kyber registered [ 1.423105] xen: registering gsi 26 triggering 0 polarity 1 [ 1.423147] xen: --> pirq=26 -> irq=26 (gsi=26) [ 1.423983] xen: registering gsi 26 triggering 0 polarity 1 [ 1.423992] Already setup the GSI :26 [ 1.424891] xen: registering gsi 40 triggering 0 polarity 1 [ 1.424919] xen: --> pirq=40 -> irq=40 (gsi=40) [ 1.425632] xen: registering gsi 16 triggering 0 polarity 1 [ 1.425640] Already setup the GSI :16 [ 1.426189] xen: registering gsi 17 triggering 0 polarity 1 [ 1.426216] xen: --> pirq=17 -> irq=17 (gsi=17) [ 1.426578] xen: registering gsi 16 triggering 0 polarity 1 [ 1.426585] Already setup the GSI :16 [ 1.427263] input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input0 [ 1.427680] ACPI: button: Power Button [PWRB] [ 1.427879] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input1 [ 1.428202] ACPI: button: Power Button [PWRF] [ 1.428619] Monitor-Mwait will be used to enter C-1 state [ 1.428707] Monitor-Mwait will be used to enter C-2 state [ 1.428771] ACPI: \_SB_.SCK0.C000: Found 2 idle states [ 1.430671] ACPI: \_SB_.SCK0.C002: Found 2 idle states [ 1.432514] ACPI: \_SB_.SCK0.C004: Found 2 idle states [ 1.434347] ACPI: \_SB_.SCK0.C006: Found 2 idle states [ 1.436547] xen:xen_evtchn: Event-channel device installed [ 1.436849] xen_pciback: backend is vpci [ 1.438042] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled [ 1.438503] 00:08: ttyS1 at I/O 0x2f8 (irq = 3, base_baud = 115200) is a 16550A [ 1.439528] hpet_acpi_add: no address or irqs in _CRS [ 1.439806] Non-volatile memory driver v1.3 [ 1.439946] AMD-Vi: AMD IOMMUv2 functionality not available on this system - This is not a bug. [ 1.443609] loop: module loaded [ 1.451542] ahci 0000:00:1f.2: version 3.0 [ 1.451726] xen: registering gsi 18 triggering 0 polarity 1 [ 1.451769] xen: --> pirq=18 -> irq=18 (gsi=18) [ 1.462161] ahci 0000:00:1f.2: AHCI 0001.0300 32 slots 6 ports 6 Gbps 0x3f impl SATA mode [ 1.462344] ahci 0000:00:1f.2: flags: 64bit ncq sntf pm led clo pio slum part ems apst [ 1.478599] scsi host0: ahci [ 1.479277] scsi host1: ahci [ 1.479807] scsi host2: ahci [ 1.480281] scsi host3: ahci [ 1.480742] scsi host4: ahci [ 1.481216] scsi host5: ahci [ 1.481422] ata1: SATA max UDMA/133 abar m2048@0xfbb21000 port 0xfbb21100 irq 75 [ 1.481623] ata2: SATA max UDMA/133 abar m2048@0xfbb21000 port 0xfbb21180 irq 75 [ 1.481817] ata3: SATA max UDMA/133 abar m2048@0xfbb21000 port 0xfbb21200 irq 75 [ 1.481982] ata4: SATA max UDMA/133 abar m2048@0xfbb21000 port 0xfbb21280 irq 75 [ 1.482145] ata5: SATA max UDMA/133 abar m2048@0xfbb21000 port 0xfbb21300 irq 75 [ 1.482309] ata6: SATA max UDMA/133 abar m2048@0xfbb21000 port 0xfbb21380 irq 75 [ 1.482902] tun: Universal TUN/TAP device driver, 1.6 [ 1.483226] e100: Intel(R) PRO/100 Network Driver [ 1.483369] e100: Copyright(c) 1999-2006 Intel Corporation [ 1.483536] sky2: driver version 1.30 [ 1.483799] xen_netfront: Initialising Xen virtual ethernet driver [ 1.484326] xen: registering gsi 16 triggering 0 polarity 1 [ 1.484338] Already setup the GSI :16 [ 1.484598] ehci-pci 0000:00:1a.0: EHCI Host Controller [ 1.484876] ehci-pci 0000:00:1a.0: new USB bus registered, assigned bus number 1 [ 1.485093] ehci-pci 0000:00:1a.0: debug port 2 [ 1.489272] ehci-pci 0000:00:1a.0: irq 16, io mem 0xfbb23000 [ 1.495698] ehci-pci 0000:00:1a.0: USB 2.0 started, EHCI 1.00 [ 1.496070] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 6.01 [ 1.496240] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 1.496404] usb usb1: Product: EHCI Host Controller [ 1.496541] usb usb1: Manufacturer: Linux 6.1.93+ ehci_hcd [ 1.496744] usb usb1: SerialNumber: 0000:00:1a.0 [ 1.497171] hub 1-0:1.0: USB hub found [ 1.497333] hub 1-0:1.0: 2 ports detected [ 1.497893] xen: registering gsi 23 triggering 0 polarity 1 [ 1.497904] Already setup the GSI :23 [ 1.498188] ehci-pci 0000:00:1d.0: EHCI Host Controller [ 1.498458] ehci-pci 0000:00:1d.0: new USB bus registered, assigned bus number 2 [ 1.498692] ehci-pci 0000:00:1d.0: debug port 2 [ 1.502874] ehci-pci 0000:00:1d.0: irq 23, io mem 0xfbb22000 [ 1.509712] ehci-pci 0000:00:1d.0: USB 2.0 started, EHCI 1.00 [ 1.510034] usb usb2: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 6.01 [ 1.510205] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 1.510370] usb usb2: Product: EHCI Host Controller [ 1.510506] usb usb2: Manufacturer: Linux 6.1.93+ ehci_hcd [ 1.510711] usb usb2: SerialNumber: 0000:00:1d.0 [ 1.511149] hub 2-0:1.0: USB hub found [ 1.511311] hub 2-0:1.0: 2 ports detected [ 1.511868] usbcore: registered new interface driver usblp [ 1.512071] usbcore: registered new interface driver usb-storage [ 1.512266] i8042: PNP: PS/2 Controller [PNP0f03:PS2M] at 0x60,0x64 irq 12 [ 1.512411] i8042: PNP: PS/2 controller doesn't have KBD irq; using default 1 [ 1.515862] serio: i8042 KBD port at 0x60,0x64 irq 1 [ 1.516008] serio: i8042 AUX port at 0x60,0x64 irq 12 [ 1.516679] rtc_cmos 00:02: RTC can wake from S4 [ 1.517586] rtc_cmos 00:02: registered as rtc0 [ 1.517824] rtc_cmos 00:02: alarms up to one month, y3k, 114 bytes nvram [ 1.518072] device-mapper: uevent: version 1.0.3 [ 1.518339] device-mapper: ioctl: 4.47.0-ioctl (2022-07-28) initialised: dm-devel@redhat.com [ 1.518363] xen: registering gsi 18 triggering 0 polarity 1 [ 1.518515] intel_pstate: CPU model not supported [ 1.518520] Already setup the GSI :18 [ 1.518545] hid: raw HID events driver (C) Jiri Kosina [ 1.518863] i801_smbus 0000:00:1f.3: SMBus using PCI interrupt [ 1.519163] usbcore: registered new interface driver usbhid [ 1.519186] i2c i2c-0: 1/6 memory slots populated (from DMI) [ 1.519304] usbhid: USB HID core driver [ 1.519319] i2c i2c-0: Systems with more than 4 memory slots not supported yet, not instantiating SPD [ 1.519915] Initializing XFRM netlink socket [ 1.520223] NET: Registered PF_INET6 protocol family [ 1.520970] Segment Routing with IPv6 [ 1.521116] In-situ OAM (IOAM) with IPv6 [ 1.521296] sit: IPv6, IPv4 and MPLS over IPv4 tunneling driver [ 1.521606] NET: Registered PF_PACKET protocol family [ 1.521866] 9pnet: Installing 9P2000 support [ 1.522026] Key type dns_resolver registered [ 1.522779] IPI shorthand broadcast: enabled [ 1.522954] sched_clock: Marking stable (1417071502, 105641217)->(1699493687, -176780968) [ 1.523655] registered taskstats version 1 [ 1.523815] Loading compiled-in X.509 certificates [ 1.527857] PM: Magic number: 12:235:976 [ 1.528119] printk: console [netcon0] enabled [ 1.528258] netconsole: network logging started [ 1.528634] cfg80211: Loading compiled-in X.509 certificates for regulatory database [ 1.539355] Freeing initrd memory: 19884K [ 1.559135] cfg80211: Loaded X.509 cert 'sforshee: 00b28ddf47aef9cea7' [ 1.559600] cfg80211: Loaded X.509 cert 'wens: 61c038651aabdcf94bd0ac7ff06c7248db18c600' [ 1.559826] ALSA device list: [ 1.559958] No soundcards found. [ 1.561441] cfg80211: loaded regulatory.db is malformed or signature is missing/invalid [ 1.738789] usb 1-1: new high-speed USB device number 2 using ehci-pci [ 1.746742] usb 2-1: new high-speed USB device number 2 using ehci-pci [ 1.791807] ata5: SATA link down (SStatus 0 SControl 300) [ 1.791975] ata3: SATA link down (SStatus 0 SControl 300) [ 1.792143] ata6: SATA link down (SStatus 0 SControl 300) [ 1.792310] ata4: SATA link down (SStatus 0 SControl 300) [ 1.792478] ata2: SATA link down (SStatus 0 SControl 300) [ 1.792639] ata1: SATA link up 6.0 Gbps (SStatus 133 SControl 300) [ 1.793715] ata1.00: ATA-8: WDC WD1003FBYZ-010FB0, 01.01V03, max UDMA/133 [ 1.794238] ata1.00: 1953525168 sectors, multi 16: LBA48 NCQ (depth 32), AA [ 1.795347] ata1.00: configured for UDMA/133 [ 1.795873] scsi 0:0:0:0: Direct-Access ATA WDC WD1003FBYZ-0 1V03 PQ: 0 ANSI: 5 [ 1.797492] sd 0:0:0:0: Attached scsi generic sg0 type 0 [ 1.797596] sd 0:0:0:0: [sda] 1953525168 512-byte logical blocks: (1.00 TB/932 GiB) [ 1.797889] sd 0:0:0:0: [sda] Write Protect is off [ 1.798033] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00 [ 1.798157] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 1.798495] sd 0:0:0:0: [sda] Preferred minimum I/O size 512 bytes [ 1.822515] sda: sda1 sda2 < sda5 > [ 1.823092] sd 0:0:0:0: [sda] Attached SCSI disk [ 1.825065] Freeing unused kernel image (initmem) memory: 1580K [ 1.825219] Write protecting the kernel read-only data: 22528k [ 1.860188] Freeing unused kernel image (text/rodata gap) memory: 2032K [ 1.862262] Freeing unused kernel image (rodata/data gap) memory: 1568K [ 1.872151] usb 1-1: New USB device found, idVendor=8087, idProduct=0024, bcdDevice= 0.00 [ 1.872325] usb 1-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0 [ 1.872914] hub 1-1:1.0: USB hub found [ 1.873237] hub 1-1:1.0: 6 ports detected [ 1.882120] usb 2-1: New USB device found, idVendor=8087, idProduct=0024, bcdDevice= 0.00 [ 1.882292] usb 2-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0 [ 1.882796] hub 2-1:1.0: USB hub found [ 1.883162] hub 2-1:1.0: 8 ports detected [ 2.144706] usb 1-1.1: new full-speed USB device number 3 using ehci-pci [ 2.224362] usb 1-1.1: New USB device found, idVendor=0557, idProduct=2221, bcdDevice= 0.01 [ 2.224541] usb 1-1.1: New USB device strings: Mfr=1, Product=2, SerialNumber=0 [ 2.224733] usb 1-1.1: Product: Hermon USB hidmouse Device [ 2.224872] usb 1-1.1: Manufacturer: Winbond Electronics Corp [ 2.226536] input: Winbond Electronics Corp Hermon USB hidmouse Device as /devices/pci0000:00/0000:00:1a.0/usb1/1-1/1-1.1/1-1.1:1.0/0003:0557:2221.0001/input/input5 [ 2.227023] hid-generic 0003:0557:2221.0001: input,hidraw0: USB HID v1.00 Mouse [Winbond Electronics Corp Hermon USB hidmouse Device] on usb-0000:00:1a.0-1.1/input0 [ 2.228513] input: Winbond Electronics Corp Hermon USB hidmouse Device as /devices/pci0000:00/0000:00:1a.0/usb1/1-1/1-1.1/1-1.1:1.1/0003:0557:2221.0002/input/input6 [ 2.281038] hid-generic 0003:0557:2221.0002: input,hidraw1: USB HID v1.00 Keyboard [Winbond Electronics Corp Hermon USB hidmouse Device] on usb-0000:00:1a.0-1.1/input1 [ 2.625934] x86/mm: Checked W+X mappings: passed, no W+X pages found. [ 2.626180] Run /init as init process [ 2.626324] with arguments: [ 2.626325] /init [ 2.626327] placeholder [ 2.626328] with environment: [ 2.626329] HOME=/ [ 2.626331] TERM=linux [ 3.330369] e1000e: Intel(R) PRO/1000 Network Driver [ 3.330525] e1000e: Copyright(c) 1999 - 2015 Intel Corporation. [ 3.330840] xen: registering gsi 16 triggering 0 polarity 1 [ 3.330852] Already setup the GSI :16 [ 3.331431] e1000e 0000:05:00.0: Interrupt Throttling Rate (ints/sec) set to dynamic conservative mode [ 3.345441] isci: Intel(R) C600 SAS Controller Driver - version 1.2.0 [ 3.345615] isci 0000:04:00.0: driver configured for rev: 6 silicon [ 3.346441] isci 0000:04:00.0: OEM SAS parameters (version: 1.3) loaded (firmware) [ 3.346714] xen: registering gsi 16 triggering 0 polarity 1 [ 3.346724] Already setup the GSI :16 [ 3.358205] isci 0000:04:00.0: SCU controller 0: phy 3-0 cables: {short, short, short, short} [ 3.361002] scsi host6: isci [ 3.375777] e1000e 0000:05:00.0 0000:05:00.0 (uninitialized): registered PHC clock [ 3.419812] e1000e 0000:05:00.0 eth0: (PCI Express:2.5GT/s:Width x1) 00:25:90:eb:25:a6 [ 3.419992] e1000e 0000:05:00.0 eth0: Intel(R) PRO/1000 Network Connection [ 3.420232] e1000e 0000:05:00.0 eth0: MAC: 3, PHY: 8, PBA No: FFFFFF-0FF [ 3.420554] xen: registering gsi 17 triggering 0 polarity 1 [ 3.420566] Already setup the GSI :17 [ 3.421132] e1000e 0000:06:00.0: Interrupt Throttling Rate (ints/sec) set to dynamic conservative mode [ 3.470209] e1000e 0000:06:00.0 0000:06:00.0 (uninitialized): registered PHC clock [ 3.516001] e1000e 0000:06:00.0 eth1: (PCI Express:2.5GT/s:Width x1) 00:25:90:eb:25:a7 [ 3.516181] e1000e 0000:06:00.0 eth1: Intel(R) PRO/1000 Network Connection [ 3.516412] e1000e 0000:06:00.0 eth1: MAC: 3, PHY: 8, PBA No: FFFFFF-0FF [ 3.520038] e1000e 0000:06:00.0 enx002590eb25a7: renamed from eth1 [ 3.534361] e1000e 0000:05:00.0 enx002590eb25a6: renamed from eth0 [ 4.367800] EXT4-fs (dm-0): mounting ext3 file system using the ext4 subsystem [ 4.373868] EXT4-fs (dm-0): mounted filesystem with ordered data mode. Quota mode: none. [ 9.265091] EXT4-fs (dm-0): re-mounted. Quota mode: none. [ 11.108503] EXT4-fs (sda1): mounting ext3 file system using the ext4 subsystem [ 11.130929] EXT4-fs (sda1): mounted filesystem with ordered data mode. Quota mode: none. [ 11.304630] Adding 1949692k swap on /dev/mapper/fiano1--vg-swap_1. Priority:-2 extents:1 across:1949692k [ 13.054454] xenbr0: port 1(enx002590eb25a6) entered blocking state [ 13.054630] xenbr0: port 1(enx002590eb25a6) entered disabled state [ 13.054924] device enx002590eb25a6 entered promiscuous mode [ 16.247803] e1000e 0000:05:00.0 enx002590eb25a6: NIC Link is Up 1000 Mbps Full Duplex, Flow Control: None [ 16.248349] IPv6: ADDRCONF(NETDEV_CHANGE): enx002590eb25a6: link becomes ready [ 16.248550] xenbr0: port 1(enx002590eb25a6) entered blocking state [ 16.248720] xenbr0: port 1(enx002590eb25a6) entered forwarding state [ 16.248970] IPv6: ADDRCONF(NETDEV_CHANGE): xenbr0: link becomes ready