[ 0.000000] microcode: microcode updated early to revision 0x42e, date = 2019-03-14 [ 0.000000] Linux version 6.1.0-21-amd64 (debian-kernel@lists.debian.org) (gcc-12 (Debian 12.2.0-14) 12.2.0, GNU ld (GNU Binutils for Debian) 2.40) #1 SMP PREEMPT_DYNAMIC Debian 6.1.90-1 (2024-05-03) [ 0.000000] Command line: BOOT_IMAGE=/vmlinuz-6.1.0-21-amd64 root=/dev/mapper/fiano1--vg-root ro console=ttyS0,115200n8 [ 0.000000] BIOS-provided physical RAM map: [ 0.000000] BIOS-e820: [mem 0x0000000000000000-0x000000000009abff] usable [ 0.000000] BIOS-e820: [mem 0x000000000009ac00-0x000000000009ffff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000000e0000-0x00000000000fffff] reserved [ 0.000000] BIOS-e820: [mem 0x0000000000100000-0x000000007de2bfff] usable [ 0.000000] BIOS-e820: [mem 0x000000007de2c000-0x000000007debafff] reserved [ 0.000000] BIOS-e820: [mem 0x000000007debb000-0x000000007dfc3fff] ACPI data [ 0.000000] BIOS-e820: [mem 0x000000007dfc4000-0x000000007e1e0fff] ACPI NVS [ 0.000000] BIOS-e820: [mem 0x000000007e1e1000-0x000000007f36afff] reserved [ 0.000000] BIOS-e820: [mem 0x000000007f36b000-0x000000007f7fffff] ACPI NVS [ 0.000000] BIOS-e820: [mem 0x0000000080000000-0x000000008fffffff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000fed1c000-0x00000000fed3ffff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000ff000000-0x00000000ffffffff] reserved [ 0.000000] BIOS-e820: [mem 0x0000000100000000-0x000000027fffffff] usable [ 0.000000] NX (Execute Disable) protection: active [ 0.000000] SMBIOS 2.7 present. [ 0.000000] DMI: Supermicro X9DBL-3F/X9DBL-iF/X9DBL-3F/X9DBL-iF, BIOS 3.00 12/06/2013 [ 0.000000] tsc: Fast TSC calibration using PIT [ 0.000000] tsc: Detected 1800.005 MHz processor [ 0.000873] e820: update [mem 0x00000000-0x00000fff] usable ==> reserved [ 0.000878] e820: remove [mem 0x000a0000-0x000fffff] usable [ 0.000888] last_pfn = 0x280000 max_arch_pfn = 0x400000000 [ 0.001027] x86/PAT: Configuration [0-7]: WB WC UC- UC WB WP UC- WT [ 0.001677] e820: update [mem 0x80000000-0xffffffff] usable ==> reserved [ 0.001686] last_pfn = 0x7de2c max_arch_pfn = 0x400000000 [ 0.018710] found SMP MP-table at [mem 0x000fd8e0-0x000fd8ef] [ 0.018735] Using GB pages for direct mapping [ 0.019194] RAMDISK: [mem 0x3329b000-0x35944fff] [ 0.019203] ACPI: Early table checksum verification disabled [ 0.019207] ACPI: RSDP 0x00000000000F04A0 000024 (v02 SUPERM) [ 0.019213] ACPI: XSDT 0x000000007DEF1088 00008C (v01 SUPERM SMCI--MB 00000001 AMI 00010013) [ 0.019222] ACPI: FACP 0x000000007DEFBAB0 0000F4 (v04 SUPERM SMCI--MB 00000001 AMI 00010013) [ 0.019230] ACPI: DSDT 0x000000007DEF11A0 00A910 (v02 SUPERM SMCI--MB 00000000 INTL 20091112) [ 0.019235] ACPI: FACS 0x000000007E1D8080 000040 [ 0.019240] ACPI: APIC 0x000000007DEFBBA8 000090 (v03 00000001 AMI 00010013) [ 0.019245] ACPI: FPDT 0x000000007DEFBC38 000044 (v01 00000001 AMI 00010013) [ 0.019250] ACPI: HPET 0x000000007DEFBC80 000038 (v01 SUPERM SMCI--MB 00000001 AMI. 00000005) [ 0.019255] ACPI: PRAD 0x000000007DEFBCB8 0000BE (v02 PRADID PRADTID 00000001 MSFT 04000000) [ 0.019260] ACPI: SPMI 0x000000007DEFBD78 000040 (v05 A M I OEMSPMI 00000000 AMI. 00000000) [ 0.019265] ACPI: SSDT 0x000000007DEFBDB8 0C7AE8 (v02 INTEL CpuPm 00004000 INTL 20091112) [ 0.019271] ACPI: EINJ 0x000000007DFC38A0 000130 (v01 AMI AMI EINJ 00000000 00000000) [ 0.019276] ACPI: ERST 0x000000007DFC39D0 000230 (v01 AMIER AMI ERST 00000000 00000000) [ 0.019281] ACPI: HEST 0x000000007DFC3C00 0000A8 (v01 AMI AMI HEST 00000000 00000000) [ 0.019286] ACPI: BERT 0x000000007DFC3CA8 000030 (v01 AMI AMI BERT 00000000 00000000) [ 0.019291] ACPI: DMAR 0x000000007DFC3CD8 0000B4 (v01 A M I OEMDMAR 00000001 INTL 00000001) [ 0.019296] ACPI: MCFG 0x000000007DFC3D90 00003C (v01 SUPERM SMCI--MB 00000001 MSFT 00000097) [ 0.019300] ACPI: Reserving FACP table memory at [mem 0x7defbab0-0x7defbba3] [ 0.019302] ACPI: Reserving DSDT table memory at [mem 0x7def11a0-0x7defbaaf] [ 0.019304] ACPI: Reserving FACS table memory at [mem 0x7e1d8080-0x7e1d80bf] [ 0.019305] ACPI: Reserving APIC table memory at [mem 0x7defbba8-0x7defbc37] [ 0.019307] ACPI: Reserving FPDT table memory at [mem 0x7defbc38-0x7defbc7b] [ 0.019308] ACPI: Reserving HPET table memory at [mem 0x7defbc80-0x7defbcb7] [ 0.019309] ACPI: Reserving PRAD table memory at [mem 0x7defbcb8-0x7defbd75] [ 0.019311] ACPI: Reserving SPMI table memory at [mem 0x7defbd78-0x7defbdb7] [ 0.019312] ACPI: Reserving SSDT table memory at [mem 0x7defbdb8-0x7dfc389f] [ 0.019314] ACPI: Reserving EINJ table memory at [mem 0x7dfc38a0-0x7dfc39cf] [ 0.019315] ACPI: Reserving ERST table memory at [mem 0x7dfc39d0-0x7dfc3bff] [ 0.019316] ACPI: Reserving HEST table memory at [mem 0x7dfc3c00-0x7dfc3ca7] [ 0.019318] ACPI: Reserving BERT table memory at [mem 0x7dfc3ca8-0x7dfc3cd7] [ 0.019319] ACPI: Reserving DMAR table memory at [mem 0x7dfc3cd8-0x7dfc3d8b] [ 0.019320] ACPI: Reserving MCFG table memory at [mem 0x7dfc3d90-0x7dfc3dcb] [ 0.019390] No NUMA configuration found [ 0.019392] Faking a node at [mem 0x0000000000000000-0x000000027fffffff] [ 0.019408] NODE_DATA(0) allocated [mem 0x27ffd5000-0x27fffffff] [ 0.019878] Zone ranges: [ 0.019879] DMA [mem 0x0000000000001000-0x0000000000ffffff] [ 0.019882] DMA32 [mem 0x0000000001000000-0x00000000ffffffff] [ 0.019884] Normal [mem 0x0000000100000000-0x000000027fffffff] [ 0.019886] Device empty [ 0.019888] Movable zone start for each node [ 0.019892] Early memory node ranges [ 0.019893] node 0: [mem 0x0000000000001000-0x0000000000099fff] [ 0.019895] node 0: [mem 0x0000000000100000-0x000000007de2bfff] [ 0.019897] node 0: [mem 0x0000000100000000-0x000000027fffffff] [ 0.019901] Initmem setup node 0 [mem 0x0000000000001000-0x000000027fffffff] [ 0.019908] On node 0, zone DMA: 1 pages in unavailable ranges [ 0.019964] On node 0, zone DMA: 102 pages in unavailable ranges [ 0.028086] On node 0, zone Normal: 8660 pages in unavailable ranges [ 0.028381] ACPI: PM-Timer IO Port: 0x408 [ 0.028393] ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1]) [ 0.028396] ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1]) [ 0.028397] ACPI: LAPIC_NMI (acpi_id[0x02] high edge lint[0x1]) [ 0.028398] ACPI: LAPIC_NMI (acpi_id[0x03] high edge lint[0x1]) [ 0.028410] IOAPIC[0]: apic_id 0, version 32, address 0xfec00000, GSI 0-23 [ 0.028417] IOAPIC[1]: apic_id 2, version 32, address 0xfec01000, GSI 24-47 [ 0.028421] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl) [ 0.028424] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level) [ 0.028430] ACPI: Using ACPI (MADT) for SMP configuration information [ 0.028432] ACPI: HPET id: 0x8086a701 base: 0xfed00000 [ 0.028439] TSC deadline timer available [ 0.028440] smpboot: Allowing 4 CPUs, 0 hotplug CPUs [ 0.028462] PM: hibernation: Registered nosave memory: [mem 0x00000000-0x00000fff] [ 0.028465] PM: hibernation: Registered nosave memory: [mem 0x0009a000-0x0009afff] [ 0.028466] PM: hibernation: Registered nosave memory: [mem 0x0009b000-0x0009ffff] [ 0.028467] PM: hibernation: Registered nosave memory: [mem 0x000a0000-0x000dffff] [ 0.028469] PM: hibernation: Registered nosave memory: [mem 0x000e0000-0x000fffff] [ 0.028471] PM: hibernation: Registered nosave memory: [mem 0x7de2c000-0x7debafff] [ 0.028472] PM: hibernation: Registered nosave memory: [mem 0x7debb000-0x7dfc3fff] [ 0.028474] PM: hibernation: Registered nosave memory: [mem 0x7dfc4000-0x7e1e0fff] [ 0.028475] PM: hibernation: Registered nosave memory: [mem 0x7e1e1000-0x7f36afff] [ 0.028476] PM: hibernation: Registered nosave memory: [mem 0x7f36b000-0x7f7fffff] [ 0.028477] PM: hibernation: Registered nosave memory: [mem 0x7f800000-0x7fffffff] [ 0.028479] PM: hibernation: Registered nosave memory: [mem 0x80000000-0x8fffffff] [ 0.028480] PM: hibernation: Registered nosave memory: [mem 0x90000000-0xfed1bfff] [ 0.028481] PM: hibernation: Registered nosave memory: [mem 0xfed1c000-0xfed3ffff] [ 0.028482] PM: hibernation: Registered nosave memory: [mem 0xfed40000-0xfeffffff] [ 0.028483] PM: hibernation: Registered nosave memory: [mem 0xff000000-0xffffffff] [ 0.028486] [mem 0x90000000-0xfed1bfff] available for PCI devices [ 0.028488] Booting paravirtualized kernel on bare hardware [ 0.028491] clocksource: refined-jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645519600211568 ns [ 0.035937] setup_percpu: NR_CPUS:8192 nr_cpumask_bits:4 nr_cpu_ids:4 nr_node_ids:1 [ 0.036331] percpu: Embedded 61 pages/cpu s212992 r8192 d28672 u524288 [ 0.036339] pcpu-alloc: s212992 r8192 d28672 u524288 alloc=1*2097152 [ 0.036344] pcpu-alloc: [0] 0 1 2 3 [ 0.036384] Fallback order for Node 0: 0 [ 0.036389] Built 1 zonelists, mobility grouping on. Total pages: 2055603 [ 0.036391] Policy zone: Normal [ 0.036393] Kernel command line: BOOT_IMAGE=/vmlinuz-6.1.0-21-amd64 root=/dev/mapper/fiano1--vg-root ro console=ttyS0,115200n8 [ 0.036462] Unknown kernel command line parameters "BOOT_IMAGE=/vmlinuz-6.1.0-21-amd64", will be passed to user space. [ 0.036477] random: crng init done [ 0.037525] Dentry cache hash table entries: 1048576 (order: 11, 8388608 bytes, linear) [ 0.038095] Inode-cache hash table entries: 524288 (order: 10, 4194304 bytes, linear) [ 0.038183] mem auto-init: stack:all(zero), heap alloc:on, heap free:off [ 0.038195] software IO TLB: area num 4. [ 0.080198] Memory: 2087172K/8353556K available (14342K kernel code, 2332K rwdata, 9060K rodata, 2796K init, 17404K bss, 304404K reserved, 0K cma-reserved) [ 0.080410] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1 [ 0.080431] Kernel/User page tables isolation: enabled [ 0.080484] ftrace: allocating 40220 entries in 158 pages [ 0.090831] ftrace: allocated 158 pages with 5 groups [ 0.091780] Dynamic Preempt: voluntary [ 0.091824] rcu: Preemptible hierarchical RCU implementation. [ 0.091825] rcu: RCU restricting CPUs from NR_CPUS=8192 to nr_cpu_ids=4. [ 0.091827] Trampoline variant of Tasks RCU enabled. [ 0.091828] Rude variant of Tasks RCU enabled. [ 0.091829] Tracing variant of Tasks RCU enabled. [ 0.091830] rcu: RCU calculated value of scheduler-enlistment delay is 25 jiffies. [ 0.091831] rcu: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=4 [ 0.099239] NR_IRQS: 524544, nr_irqs: 864, preallocated irqs: 16 [ 0.099447] rcu: srcu_init: Setting srcu_struct sizes based on contention. [ 0.103963] Console: colour VGA+ 80x25 [ 1.028345] printk: console [ttyS0] enabled [ 1.032549] ACPI: Core revision 20220331 [ 1.037202] clocksource: hpet: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 133484882848 ns [ 1.046340] APIC: Switch to symmetric I/O mode setup [ 1.051322] DMAR: Host address width 46 [ 1.055169] DMAR: DRHD base: 0x000000fbffc000 flags: 0x1 [ 1.060496] DMAR: dmar0: reg_base_addr fbffc000 ver 1:0 cap d2078c106f0466 ecap f020de [ 1.068418] DMAR: RMRR base: 0x0000007de91000 end: 0x0000007de9dfff [ 1.074693] DMAR: ATSR flags: 0x0 [ 1.078012] DMAR: RHSA base: 0x000000fbffc000 proximity domain: 0x0 [ 1.084288] DMAR-IR: IOAPIC id 0 under DRHD base 0xfbffc000 IOMMU 0 [ 1.090646] DMAR-IR: IOAPIC id 2 under DRHD base 0xfbffc000 IOMMU 0 [ 1.097001] DMAR-IR: HPET id 0 under DRHD base 0xfbffc000 [ 1.102407] DMAR-IR: Queued invalidation will be enabled to support x2apic and Intr-remapping. [ 1.111543] DMAR-IR: Enabled IRQ remapping in x2apic mode [ 1.116943] x2apic enabled [ 1.119661] Switched APIC routing to cluster x2apic. [ 1.125172] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1 [ 1.150339] clocksource: tsc-early: mask: 0xffffffffffffffff max_cycles: 0x19f22e42037, max_idle_ns: 440795249997 ns [ 1.160853] Calibrating delay loop (skipped), value calculated using timer frequency.. 3600.01 BogoMIPS (lpj=7200020) [ 1.164884] CPU0: Thermal monitoring enabled (TM1) [ 1.168936] process: using mwait in idle threads [ 1.172853] Last level iTLB entries: 4KB 512, 2MB 8, 4MB 8 [ 1.176851] Last level dTLB entries: 4KB 512, 2MB 0, 4MB 0, 1GB 4 [ 1.180853] Spectre V1 : Mitigation: usercopy/swapgs barriers and __user pointer sanitization [ 1.184852] Spectre V2 : Mitigation: Retpolines [ 1.188851] Spectre V2 : Spectre v2 / SpectreRSB mitigation: Filling RSB on context switch [ 1.192851] Spectre V2 : Spectre v2 / SpectreRSB : Filling RSB on VMEXIT [ 1.196851] Spectre V2 : Enabling Restricted Speculation for firmware calls [ 1.200852] Spectre V2 : mitigation: Enabling conditional Indirect Branch Prediction Barrier [ 1.204852] Speculative Store Bypass: Mitigation: Speculative Store Bypass disabled via prctl [ 1.208852] MDS: Mitigation: Clear CPU buffers [ 1.212851] MMIO Stale Data: Unknown: No mitigations [ 1.216856] x86/fpu: Supporting XSAVE feature 0x001: 'x87 floating point registers' [ 1.220851] x86/fpu: Supporting XSAVE feature 0x002: 'SSE registers' [ 1.224851] x86/fpu: Supporting XSAVE feature 0x004: 'AVX registers' [ 1.228852] x86/fpu: xstate_offset[2]: 576, xstate_sizes[2]: 256 [ 1.232851] x86/fpu: Enabled xstate features 0x7, context size is 832 bytes, using 'standard' format. [ 1.261678] Freeing SMP alternatives memory: 36K [ 1.264852] pid_max: default: 32768 minimum: 301 [ 1.268885] LSM: Security Framework initializing [ 1.272870] landlock: Up and running. [ 1.276851] Yama: disabled by default; enable with sysctl kernel.yama.* [ 1.280881] AppArmor: AppArmor initialized [ 1.284853] TOMOYO Linux initialized [ 1.288857] LSM support for eBPF active [ 1.292897] Mount-cache hash table entries: 16384 (order: 5, 131072 bytes, linear) [ 1.296867] Mountpoint-cache hash table entries: 16384 (order: 5, 131072 bytes, linear) [ 1.301478] smpboot: CPU0: Intel(R) Xeon(R) CPU E5-2403 v2 @ 1.80GHz (family: 0x6, model: 0x3e, stepping: 0x4) [ 1.305041] cblist_init_generic: Setting adjustable number of callback queues. [ 1.308852] cblist_init_generic: Setting shift to 2 and lim to 1. [ 1.312882] cblist_init_generic: Setting adjustable number of callback queues. [ 1.316852] cblist_init_generic: Setting shift to 2 and lim to 1. [ 1.320874] cblist_init_generic: Setting adjustable number of callback queues. [ 1.324851] cblist_init_generic: Setting shift to 2 and lim to 1. [ 1.328872] Performance Events: PEBS fmt1+, IvyBridge events, 16-deep LBR, full-width counters, Intel PMU driver. [ 1.332853] ... version: 3 [ 1.336851] ... bit width: 48 [ 1.340851] ... generic registers: 8 [ 1.344851] ... value mask: 0000ffffffffffff [ 1.348851] ... max period: 00007fffffffffff [ 1.352851] ... fixed-purpose events: 3 [ 1.356851] ... event mask: 00000007000000ff [ 1.361085] signal: max sigframe size: 1776 [ 1.364876] Estimated ratio of average max frequency by base frequency (times 1024): 1024 [ 1.368884] rcu: Hierarchical SRCU implementation. [ 1.372852] rcu: Max phase no-delay instances is 1000. [ 1.377530] NMI watchdog: Enabled. Permanently consumes one hw-PMU counter. [ 1.380944] smp: Bringing up secondary CPUs ... [ 1.385000] x86: Booting SMP configuration: [ 1.388857] .... node #0, CPUs: #1 #2 #3 [ 1.403995] smp: Brought up 1 node, 4 CPUs [ 1.408852] smpboot: Max logical packages: 1 [ 1.412851] smpboot: Total of 4 processors activated (14400.04 BogoMIPS) [ 1.437915] node 0 deferred pages initialised in 20ms [ 1.441292] devtmpfs: initialized [ 1.444933] x86/mm: Memory block size: 128MB [ 1.449905] ACPI: PM: Registering ACPI NVS region [mem 0x7dfc4000-0x7e1e0fff] (2215936 bytes) [ 1.452902] ACPI: PM: Registering ACPI NVS region [mem 0x7f36b000-0x7f7fffff] (4804608 bytes) [ 1.457006] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645041785100000 ns [ 1.460864] futex hash table entries: 1024 (order: 4, 65536 bytes, linear) [ 1.464913] pinctrl core: initialized pinctrl subsystem [ 1.469749] NET: Registered PF_NETLINK/PF_ROUTE protocol family [ 1.473129] DMA: preallocated 1024 KiB GFP_KERNEL pool for atomic allocations [ 1.477004] DMA: preallocated 1024 KiB GFP_KERNEL|GFP_DMA pool for atomic allocations [ 1.481003] DMA: preallocated 1024 KiB GFP_KERNEL|GFP_DMA32 pool for atomic allocations [ 1.484861] audit: initializing netlink subsys (disabled) [ 1.488867] audit: type=2000 audit(1718361538.400:1): state=initialized audit_enabled=0 res=1 [ 1.489003] thermal_sys: Registered thermal governor 'fair_share' [ 1.492854] thermal_sys: Registered thermal governor 'bang_bang' [ 1.496852] thermal_sys: Registered thermal governor 'step_wise' [ 1.500851] thermal_sys: Registered thermal governor 'user_space' [ 1.504851] thermal_sys: Registered thermal governor 'power_allocator' [ 1.508868] cpuidle: using governor ladder [ 1.516856] cpuidle: using governor menu [ 1.520825] ACPI FADT declares the system doesn't support PCIe ASPM, so disable it [ 1.520853] acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5 [ 1.524955] PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0x80000000-0x8fffffff] (base 0x80000000) [ 1.528854] PCI: MMCONFIG at [mem 0x80000000-0x8fffffff] reserved in E820 [ 1.532861] pmd_set_huge: Cannot satisfy [mem 0x80000000-0x80200000] with a huge-page mapping due to MTRR override. [ 1.537273] PCI: Using configuration type 1 for base access [ 1.540948] core: PMU erratum BJ122, BV98, HSD29 workaround disabled, HT off [ 1.546189] kprobes: kprobe jump-optimization is enabled. All kprobes are optimized if possible. [ 1.548880] HugeTLB: registered 1.00 GiB page size, pre-allocated 0 pages [ 1.552854] HugeTLB: 16380 KiB vmemmap can be freed for a 1.00 GiB page [ 1.560852] HugeTLB: registered 2.00 MiB page size, pre-allocated 0 pages [ 1.568851] HugeTLB: 28 KiB vmemmap can be freed for a 2.00 MiB page [ 1.575450] ACPI: Added _OSI(Module Device) [ 1.576856] ACPI: Added _OSI(Processor Device) [ 1.580852] ACPI: Added _OSI(3.0 _SCP Extensions) [ 1.588852] ACPI: Added _OSI(Processor Aggregator Device) [ 1.707919] ACPI: 2 ACPI AML tables successfully acquired and loaded [ 1.738445] ACPI: Interpreter enabled [ 1.740874] ACPI: PM: (supports S0 S1 S4 S5) [ 1.744852] ACPI: Using IOAPIC for interrupt routing [ 1.752964] HEST: Table parsing has been initialized. [ 1.756978] GHES: APEI firmware first mode is enabled by WHEA _OSC. [ 1.760856] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug [ 1.772851] PCI: Using E820 reservations for host bridge windows [ 1.777407] ACPI: Enabled 5 GPEs in block 00 to 3F [ 1.784961] ACPI BIOS Error (bug): Could not resolve symbol [\_SB.PRAD], AE_NOT_FOUND (20220331/psargs-330) [ 1.788855] ACPI Error: Aborting method \_GPE._L24 due to previous error (AE_NOT_FOUND) (20220331/psparse-529) [ 1.792860] ACPI Error: AE_NOT_FOUND, while evaluating GPE method [_L24] (20220331/evgpe-511) [ 1.796850] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-fe]) [ 1.800850] acpi PNP0A08:00: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI HPX-Type3] [ 1.808945] acpi PNP0A08:00: _OSC: platform does not support [SHPCHotplug PME AER LTR] [ 1.817005] acpi PNP0A08:00: _OSC: OS now controls [PCIeHotplug PCIeCapability] [ 1.824852] acpi PNP0A08:00: FADT indicates ASPM is unsupported, using BIOS configuration [ 1.833213] PCI host bridge to bus 0000:00 [ 1.836854] pci_bus 0000:00: root bus resource [io 0x0000-0x03af window] [ 1.844852] pci_bus 0000:00: root bus resource [io 0x03e0-0x0cf7 window] [ 1.852851] pci_bus 0000:00: root bus resource [io 0x03b0-0x03df window] [ 1.856851] pci_bus 0000:00: root bus resource [io 0x0d00-0xffff window] [ 1.864852] pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000dffff window] [ 1.872851] pci_bus 0000:00: root bus resource [mem 0xfed08000-0xfed08fff window] [ 1.880851] pci_bus 0000:00: root bus resource [mem 0xfed0e000-0xfed0ffff window] [ 1.888851] pci_bus 0000:00: root bus resource [mem 0x80000000-0xfbffffff window] [ 1.896852] pci_bus 0000:00: root bus resource [bus 00-fe] [ 1.900882] pci 0000:00:00.0: [8086:0e00] type 00 class 0x060000 [ 1.904935] pci 0000:00:00.0: PME# supported from D0 D3hot D3cold [ 1.912977] pci 0000:00:01.0: [8086:0e02] type 01 class 0x060400 [ 1.920952] pci 0000:00:01.0: PME# supported from D0 D3hot D3cold [ 1.925019] pci 0000:00:01.1: [8086:0e03] type 01 class 0x060400 [ 1.932950] pci 0000:00:01.1: PME# supported from D0 D3hot D3cold [ 1.937019] pci 0000:00:03.0: [8086:0e08] type 01 class 0x060400 [ 1.944890] pci 0000:00:03.0: enabling Extended Tags [ 1.948916] pci 0000:00:03.0: PME# supported from D0 D3hot D3cold [ 1.957006] pci 0000:00:04.0: [8086:0e20] type 00 class 0x088000 [ 1.960869] pci 0000:00:04.0: reg 0x10: [mem 0xfbb1c000-0xfbb1ffff 64bit] [ 1.968997] pci 0000:00:04.1: [8086:0e21] type 00 class 0x088000 [ 1.972868] pci 0000:00:04.1: reg 0x10: [mem 0xfbb18000-0xfbb1bfff 64bit] [ 1.980987] pci 0000:00:04.2: [8086:0e22] type 00 class 0x088000 [ 1.988868] pci 0000:00:04.2: reg 0x10: [mem 0xfbb14000-0xfbb17fff 64bit] [ 1.992986] pci 0000:00:04.3: [8086:0e23] type 00 class 0x088000 [ 2.000868] pci 0000:00:04.3: reg 0x10: [mem 0xfbb10000-0xfbb13fff 64bit] [ 2.004987] pci 0000:00:04.4: [8086:0e24] type 00 class 0x088000 [ 2.012868] pci 0000:00:04.4: reg 0x10: [mem 0xfbb0c000-0xfbb0ffff 64bit] [ 2.020986] pci 0000:00:04.5: [8086:0e25] type 00 class 0x088000 [ 2.024868] pci 0000:00:04.5: reg 0x10: [mem 0xfbb08000-0xfbb0bfff 64bit] [ 2.032988] pci 0000:00:04.6: [8086:0e26] type 00 class 0x088000 [ 2.036870] pci 0000:00:04.6: reg 0x10: [mem 0xfbb04000-0xfbb07fff 64bit] [ 2.044987] pci 0000:00:04.7: [8086:0e27] type 00 class 0x088000 [ 2.052868] pci 0000:00:04.7: reg 0x10: [mem 0xfbb00000-0xfbb03fff 64bit] [ 2.056987] pci 0000:00:05.0: [8086:0e28] type 00 class 0x088000 [ 2.064982] pci 0000:00:05.2: [8086:0e2a] type 00 class 0x088000 [ 2.068975] pci 0000:00:05.4: [8086:0e2c] type 00 class 0x080020 [ 2.076863] pci 0000:00:05.4: reg 0x10: [mem 0xfbb25000-0xfbb25fff] [ 2.085002] pci 0000:00:11.0: [8086:1d3e] type 01 class 0x060400 [ 2.088972] pci 0000:00:11.0: PME# supported from D0 D3hot D3cold [ 2.096995] pci 0000:00:16.0: [8086:1d3a] type 00 class 0x078000 [ 2.100870] pci 0000:00:16.0: reg 0x10: [mem 0xfed0e000-0xfed0e00f 64bit] [ 2.108920] pci 0000:00:16.0: PME# supported from D0 D3hot D3cold [ 2.112941] pci 0000:00:16.1: [8086:1d3b] type 00 class 0x078000 [ 2.120870] pci 0000:00:16.1: reg 0x10: [mem 0xfed0f000-0xfed0f00f 64bit] [ 2.128920] pci 0000:00:16.1: PME# supported from D0 D3hot D3cold [ 2.132954] pci 0000:00:1a.0: [8086:1d2d] type 00 class 0x0c0320 [ 2.140868] pci 0000:00:1a.0: reg 0x10: [mem 0xfbb23000-0xfbb233ff] [ 2.144942] pci 0000:00:1a.0: PME# supported from D0 D3hot D3cold [ 2.152962] pci 0000:00:1c.0: [8086:1d10] type 01 class 0x060400 [ 2.156951] pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold [ 2.164882] pci 0000:00:1c.0: Enabling MPC IRBNCE [ 2.168853] pci 0000:00:1c.0: Intel PCH root port ACS workaround enabled [ 2.176956] pci 0000:00:1c.1: [8086:1d12] type 01 class 0x060400 [ 2.180951] pci 0000:00:1c.1: PME# supported from D0 D3hot D3cold [ 2.188876] pci 0000:00:1c.1: Enabling MPC IRBNCE [ 2.192853] pci 0000:00:1c.1: Intel PCH root port ACS workaround enabled [ 2.200976] pci 0000:00:1d.0: [8086:1d26] type 00 class 0x0c0320 [ 2.204868] pci 0000:00:1d.0: reg 0x10: [mem 0xfbb22000-0xfbb223ff] [ 2.212943] pci 0000:00:1d.0: PME# supported from D0 D3hot D3cold [ 2.216956] pci 0000:00:1e.0: [8086:244e] type 01 class 0x060401 [ 2.224997] pci 0000:00:1f.0: [8086:1d41] type 00 class 0x060100 [ 2.229068] pci 0000:00:1f.2: [8086:1d02] type 00 class 0x010601 [ 2.236865] pci 0000:00:1f.2: reg 0x10: [io 0xf050-0xf057] [ 2.240858] pci 0000:00:1f.2: reg 0x14: [io 0xf040-0xf043] [ 2.248858] pci 0000:00:1f.2: reg 0x18: [io 0xf030-0xf037] [ 2.252858] pci 0000:00:1f.2: reg 0x1c: [io 0xf020-0xf023] [ 2.260858] pci 0000:00:1f.2: reg 0x20: [io 0xf000-0xf01f] [ 2.264858] pci 0000:00:1f.2: reg 0x24: [mem 0xfbb21000-0xfbb217ff] [ 2.268896] pci 0000:00:1f.2: PME# supported from D3hot [ 2.276942] pci 0000:00:1f.3: [8086:1d22] type 00 class 0x0c0500 [ 2.280869] pci 0000:00:1f.3: reg 0x10: [mem 0xfbb20000-0xfbb200ff 64bit] [ 2.288875] pci 0000:00:1f.3: reg 0x20: [io 0x1180-0x119f] [ 2.292928] pci 0000:00:1f.6: [8086:1d24] type 00 class 0x118000 [ 2.300872] pci 0000:00:1f.6: reg 0x10: [mem 0xfed08000-0xfed08fff 64bit] [ 2.309014] pci 0000:00:01.0: PCI bridge to [bus 01] [ 2.312903] pci 0000:00:01.1: PCI bridge to [bus 02] [ 2.316901] pci 0000:00:03.0: PCI bridge to [bus 03] [ 2.320934] pci 0000:04:00.0: [8086:1d6b] type 00 class 0x010700 [ 2.328874] pci 0000:04:00.0: reg 0x10: [mem 0xfa47c000-0xfa47ffff 64bit pref] [ 2.336866] pci 0000:04:00.0: reg 0x18: [mem 0xfa000000-0xfa3fffff 64bit pref] [ 2.344860] pci 0000:04:00.0: reg 0x20: [io 0xe000-0xe0ff] [ 2.348877] pci 0000:04:00.0: enabling Extended Tags [ 2.352958] pci 0000:04:00.0: reg 0x164: [mem 0xfa400000-0xfa403fff 64bit pref] [ 2.360852] pci 0000:04:00.0: VF(n) BAR0 space: [mem 0xfa400000-0xfa47bfff 64bit pref] (contains BAR0 for 31 VFs) [ 2.373109] pci 0000:00:11.0: PCI bridge to [bus 04] [ 2.376855] pci 0000:00:11.0: bridge window [io 0xe000-0xefff] [ 2.380859] pci 0000:00:11.0: bridge window [mem 0xfa000000-0xfa4fffff 64bit pref] [ 2.388950] pci 0000:05:00.0: [8086:10d3] type 00 class 0x020000 [ 2.396887] pci 0000:05:00.0: reg 0x10: [mem 0xfba00000-0xfba1ffff] [ 2.400888] pci 0000:05:00.0: reg 0x18: [io 0xd000-0xd01f] [ 2.408870] pci 0000:05:00.0: reg 0x1c: [mem 0xfba20000-0xfba23fff] [ 2.413040] pci 0000:05:00.0: PME# supported from D0 D3hot D3cold [ 2.421075] pci 0000:00:1c.0: PCI bridge to [bus 05] [ 2.424855] pci 0000:00:1c.0: bridge window [io 0xd000-0xdfff] [ 2.432854] pci 0000:00:1c.0: bridge window [mem 0xfba00000-0xfbafffff] [ 2.440953] pci 0000:06:00.0: [8086:10d3] type 00 class 0x020000 [ 2.444887] pci 0000:06:00.0: reg 0x10: [mem 0xfb900000-0xfb91ffff] [ 2.452889] pci 0000:06:00.0: reg 0x18: [io 0xc000-0xc01f] [ 2.456870] pci 0000:06:00.0: reg 0x1c: [mem 0xfb920000-0xfb923fff] [ 2.465037] pci 0000:06:00.0: PME# supported from D0 D3hot D3cold [ 2.469067] pci 0000:00:1c.1: PCI bridge to [bus 06] [ 2.472854] pci 0000:00:1c.1: bridge window [io 0xc000-0xcfff] [ 2.480854] pci 0000:00:1c.1: bridge window [mem 0xfb900000-0xfb9fffff] [ 2.488874] pci_bus 0000:07: extended config space not accessible [ 2.492877] pci 0000:07:01.0: [102b:0532] type 00 class 0x030000 [ 2.500868] pci 0000:07:01.0: reg 0x10: [mem 0xf9000000-0xf9ffffff pref] [ 2.504860] pci 0000:07:01.0: reg 0x14: [mem 0xfb800000-0xfb803fff] [ 2.512860] pci 0000:07:01.0: reg 0x18: [mem 0xfb000000-0xfb7fffff] [ 2.520898] pci 0000:07:01.0: Video device with shadowed ROM at [mem 0x000c0000-0x000dffff] [ 2.528963] pci 0000:00:1e.0: PCI bridge to [bus 07] (subtractive decode) [ 2.532856] pci 0000:00:1e.0: bridge window [mem 0xfb000000-0xfb8fffff] [ 2.540858] pci 0000:00:1e.0: bridge window [mem 0xf9000000-0xf9ffffff 64bit pref] [ 2.548852] pci 0000:00:1e.0: bridge window [io 0x0000-0x03af window] (subtractive decode) [ 2.556851] pci 0000:00:1e.0: bridge window [io 0x03e0-0x0cf7 window] (subtractive decode) [ 2.564851] pci 0000:00:1e.0: bridge window [io 0x03b0-0x03df window] (subtractive decode) [ 2.572851] pci 0000:00:1e.0: bridge window [io 0x0d00-0xffff window] (subtractive decode) [ 2.584851] pci 0000:00:1e.0: bridge window [mem 0x000a0000-0x000dffff window] (subtractive decode) [ 2.592851] pci 0000:00:1e.0: bridge window [mem 0xfed08000-0xfed08fff window] (subtractive decode) [ 2.600851] pci 0000:00:1e.0: bridge window [mem 0xfed0e000-0xfed0ffff window] (subtractive decode) [ 2.608851] pci 0000:00:1e.0: bridge window [mem 0x80000000-0xfbffffff window] (subtractive decode) [ 2.621654] ACPI: PCI Root Bridge [UNC0] (domain 0000 [bus ff]) [ 2.624856] acpi PNP0A03:00: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI HPX-Type3] [ 2.636871] acpi PNP0A03:00: _OSC: OS now controls [PCIeHotplug SHPCHotplug PME AER PCIeCapability LTR] [ 2.644852] acpi PNP0A03:00: FADT indicates ASPM is unsupported, using BIOS configuration [ 2.652920] PCI host bridge to bus 0000:ff [ 2.656853] pci_bus 0000:ff: root bus resource [bus ff] [ 2.660865] pci 0000:ff:08.0: [8086:0e80] type 00 class 0x088000 [ 2.668931] pci 0000:ff:09.0: [8086:0e90] type 00 class 0x088000 [ 2.672921] pci 0000:ff:0a.0: [8086:0ec0] type 00 class 0x088000 [ 2.680912] pci 0000:ff:0a.1: [8086:0ec1] type 00 class 0x088000 [ 2.684911] pci 0000:ff:0a.2: [8086:0ec2] type 00 class 0x088000 [ 2.692917] pci 0000:ff:0a.3: [8086:0ec3] type 00 class 0x088000 [ 2.696918] pci 0000:ff:0b.0: [8086:0e1e] type 00 class 0x088000 [ 2.704909] pci 0000:ff:0b.3: [8086:0e1f] type 00 class 0x088000 [ 2.712910] pci 0000:ff:0c.0: [8086:0ee0] type 00 class 0x088000 [ 2.716911] pci 0000:ff:0c.1: [8086:0ee2] type 00 class 0x088000 [ 2.724912] pci 0000:ff:0d.0: [8086:0ee1] type 00 class 0x088000 [ 2.728908] pci 0000:ff:0d.1: [8086:0ee3] type 00 class 0x088000 [ 2.736912] pci 0000:ff:0e.0: [8086:0ea0] type 00 class 0x088000 [ 2.740914] pci 0000:ff:0e.1: [8086:0e30] type 00 class 0x110100 [ 2.748928] pci 0000:ff:0f.0: [8086:0ea8] type 00 class 0x088000 [ 2.752940] pci 0000:ff:0f.1: [8086:0e71] type 00 class 0x088000 [ 2.760934] pci 0000:ff:0f.2: [8086:0eaa] type 00 class 0x088000 [ 2.764934] pci 0000:ff:0f.3: [8086:0eab] type 00 class 0x088000 [ 2.772933] pci 0000:ff:0f.4: [8086:0eac] type 00 class 0x088000 [ 2.776938] pci 0000:ff:0f.5: [8086:0ead] type 00 class 0x088000 [ 2.784936] pci 0000:ff:10.0: [8086:0eb0] type 00 class 0x088000 [ 2.788934] pci 0000:ff:10.1: [8086:0eb1] type 00 class 0x088000 [ 2.796942] pci 0000:ff:10.2: [8086:0eb2] type 00 class 0x088000 [ 2.800935] pci 0000:ff:10.3: [8086:0eb3] type 00 class 0x088000 [ 2.808933] pci 0000:ff:10.4: [8086:0eb4] type 00 class 0x088000 [ 2.812935] pci 0000:ff:10.5: [8086:0eb5] type 00 class 0x088000 [ 2.820935] pci 0000:ff:10.6: [8086:0eb6] type 00 class 0x088000 [ 2.824934] pci 0000:ff:10.7: [8086:0eb7] type 00 class 0x088000 [ 2.832932] pci 0000:ff:13.0: [8086:0e1d] type 00 class 0x088000 [ 2.836911] pci 0000:ff:13.1: [8086:0e34] type 00 class 0x110100 [ 2.844916] pci 0000:ff:13.4: [8086:0e81] type 00 class 0x088000 [ 2.848912] pci 0000:ff:13.5: [8086:0e36] type 00 class 0x110100 [ 2.856914] pci 0000:ff:16.0: [8086:0ec8] type 00 class 0x088000 [ 2.864910] pci 0000:ff:16.1: [8086:0ec9] type 00 class 0x088000 [ 2.868909] pci 0000:ff:16.2: [8086:0eca] type 00 class 0x088000 [ 2.877073] ACPI: PCI: Interrupt link LNKA configured for IRQ 11 [ 2.880906] ACPI: PCI: Interrupt link LNKB configured for IRQ 10 [ 2.888904] ACPI: PCI: Interrupt link LNKC configured for IRQ 5 [ 2.892903] ACPI: PCI: Interrupt link LNKD configured for IRQ 11 [ 2.900903] ACPI: PCI: Interrupt link LNKE configured for IRQ 0 [ 2.904903] ACPI: PCI: Interrupt link LNKF configured for IRQ 0 [ 2.912921] ACPI: PCI: Interrupt link LNKG configured for IRQ 0 [ 2.916904] ACPI: PCI: Interrupt link LNKH configured for IRQ 7 [ 2.926492] iommu: Default domain type: Translated [ 2.928852] iommu: DMA domain TLB invalidation policy: lazy mode [ 2.936951] pps_core: LinuxPPS API ver. 1 registered [ 2.940852] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti [ 2.948854] PTP clock support registered [ 2.952791] EDAC MC: Ver: 3.0.0 [ 2.957112] NetLabel: Initializing [ 2.960515] NetLabel: domain hash size = 128 [ 2.964854] NetLabel: protocols = UNLABELED CIPSOv4 CALIPSO [ 2.972874] NetLabel: unlabeled traffic allowed by default [ 2.976852] PCI: Using ACPI for IRQ routing [ 2.987852] PCI: pci_cache_line_size set to 64 bytes [ 2.987978] e820: reserve RAM buffer [mem 0x0009ac00-0x0009ffff] [ 2.987981] e820: reserve RAM buffer [mem 0x7de2c000-0x7fffffff] [ 2.988889] pci 0000:07:01.0: vgaarb: setting as boot VGA device [ 2.992850] pci 0000:07:01.0: vgaarb: bridge control possible [ 2.992850] pci 0000:07:01.0: vgaarb: VGA device added: decodes=io+mem,owns=io+mem,locks=none [ 3.008859] vgaarb: loaded [ 3.013389] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0, 0, 0, 0, 0, 0 [ 3.020852] hpet0: 8 comparators, 64-bit 14.318180 MHz counter [ 3.026913] clocksource: Switched to clocksource tsc-early [ 3.030557] VFS: Disk quotas dquot_6.6.0 [ 3.034509] VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes) [ 3.041582] AppArmor: AppArmor Filesystem Enabled [ 3.046318] pnp: PnP ACPI init [ 3.049533] system 00:00: [mem 0xfc000000-0xfcffffff] has been reserved [ 3.056149] system 00:00: [mem 0xfd000000-0xfdffffff] has been reserved [ 3.062759] system 00:00: [mem 0xfe000000-0xfeafffff] has been reserved [ 3.069374] system 00:00: [mem 0xfeb00000-0xfebfffff] has been reserved [ 3.076117] system 00:01: [mem 0xfbffc000-0xfbffdfff] could not be reserved [ 3.083225] system 00:03: [io 0x04d0-0x04d1] has been reserved [ 3.089151] system 00:03: [mem 0x00000400-0x000004ff] could not be reserved [ 3.096433] system 00:06: [io 0x0b00-0x0b7f] has been reserved [ 3.102558] pnp 00:07: [dma 0 disabled] [ 3.102799] pnp 00:08: [dma 0 disabled] [ 3.103082] system 00:09: [io 0x0400-0x0453] has been reserved [ 3.109007] system 00:09: [io 0x0458-0x047f] has been reserved [ 3.114923] system 00:09: [io 0x1180-0x119f] has been reserved [ 3.120840] system 00:09: [io 0x0500-0x057f] has been reserved [ 3.126763] system 00:09: [mem 0xfed1c000-0xfed1ffff] has been reserved [ 3.133374] system 00:09: [mem 0xfec00000-0xfecfffff] could not be reserved [ 3.140335] system 00:09: [mem 0xff000000-0xffffffff] has been reserved [ 3.147054] system 00:0a: [io 0x0454-0x0457] has been reserved [ 3.153259] system 00:0b: [mem 0x00000000-0x0009ffff] could not be reserved [ 3.160503] pnp: PnP ACPI: found 12 devices [ 3.171228] clocksource: acpi_pm: mask: 0xffffff max_cycles: 0xffffff, max_idle_ns: 2085701024 ns [ 3.180200] NET: Registered PF_INET protocol family [ 3.185263] IP idents hash table entries: 131072 (order: 8, 1048576 bytes, linear) [ 3.195590] tcp_listen_portaddr_hash hash table entries: 4096 (order: 4, 65536 bytes, linear) [ 3.204158] Table-perturb hash table entries: 65536 (order: 6, 262144 bytes, linear) [ 3.211991] TCP established hash table entries: 65536 (order: 7, 524288 bytes, linear) [ 3.220291] TCP bind hash table entries: 65536 (order: 9, 2097152 bytes, linear) [ 3.228083] TCP: Hash tables configured (established 65536 bind 65536) [ 3.234709] MPTCP token hash table entries: 8192 (order: 5, 196608 bytes, linear) [ 3.242261] UDP hash table entries: 4096 (order: 5, 131072 bytes, linear) [ 3.249092] UDP-Lite hash table entries: 4096 (order: 5, 131072 bytes, linear) [ 3.256384] NET: Registered PF_UNIX/PF_LOCAL protocol family [ 3.262058] NET: Registered PF_XDP protocol family [ 3.266868] pci 0000:00:01.0: PCI bridge to [bus 01] [ 3.271840] pci 0000:00:01.1: PCI bridge to [bus 02] [ 3.276815] pci 0000:00:03.0: PCI bridge to [bus 03] [ 3.281790] pci 0000:00:11.0: PCI bridge to [bus 04] [ 3.286755] pci 0000:00:11.0: bridge window [io 0xe000-0xefff] [ 3.292855] pci 0000:00:11.0: bridge window [mem 0xfa000000-0xfa4fffff 64bit pref] [ 3.300603] pci 0000:00:1c.0: PCI bridge to [bus 05] [ 3.305573] pci 0000:00:1c.0: bridge window [io 0xd000-0xdfff] [ 3.311665] pci 0000:00:1c.0: bridge window [mem 0xfba00000-0xfbafffff] [ 3.318457] pci 0000:00:1c.1: PCI bridge to [bus 06] [ 3.323423] pci 0000:00:1c.1: bridge window [io 0xc000-0xcfff] [ 3.329520] pci 0000:00:1c.1: bridge window [mem 0xfb900000-0xfb9fffff] [ 3.336310] pci 0000:00:1e.0: PCI bridge to [bus 07] [ 3.341279] pci 0000:00:1e.0: bridge window [mem 0xfb000000-0xfb8fffff] [ 3.348064] pci 0000:00:1e.0: bridge window [mem 0xf9000000-0xf9ffffff 64bit pref] [ 3.355806] pci_bus 0000:00: resource 4 [io 0x0000-0x03af window] [ 3.361988] pci_bus 0000:00: resource 5 [io 0x03e0-0x0cf7 window] [ 3.368169] pci_bus 0000:00: resource 6 [io 0x03b0-0x03df window] [ 3.374348] pci_bus 0000:00: resource 7 [io 0x0d00-0xffff window] [ 3.380526] pci_bus 0000:00: resource 8 [mem 0x000a0000-0x000dffff window] [ 3.387398] pci_bus 0000:00: resource 9 [mem 0xfed08000-0xfed08fff window] [ 3.394273] pci_bus 0000:00: resource 10 [mem 0xfed0e000-0xfed0ffff window] [ 3.401231] pci_bus 0000:00: resource 11 [mem 0x80000000-0xfbffffff window] [ 3.408193] pci_bus 0000:04: resource 0 [io 0xe000-0xefff] [ 3.413764] pci_bus 0000:04: resource 2 [mem 0xfa000000-0xfa4fffff 64bit pref] [ 3.420983] pci_bus 0000:05: resource 0 [io 0xd000-0xdfff] [ 3.426556] pci_bus 0000:05: resource 1 [mem 0xfba00000-0xfbafffff] [ 3.432824] pci_bus 0000:06: resource 0 [io 0xc000-0xcfff] [ 3.438393] pci_bus 0000:06: resource 1 [mem 0xfb900000-0xfb9fffff] [ 3.444660] pci_bus 0000:07: resource 1 [mem 0xfb000000-0xfb8fffff] [ 3.450925] pci_bus 0000:07: resource 2 [mem 0xf9000000-0xf9ffffff 64bit pref] [ 3.458145] pci_bus 0000:07: resource 4 [io 0x0000-0x03af window] [ 3.464324] pci_bus 0000:07: resource 5 [io 0x03e0-0x0cf7 window] [ 3.470503] pci_bus 0000:07: resource 6 [io 0x03b0-0x03df window] [ 3.476684] pci_bus 0000:07: resource 7 [io 0x0d00-0xffff window] [ 3.482862] pci_bus 0000:07: resource 8 [mem 0x000a0000-0x000dffff window] [ 3.489734] pci_bus 0000:07: resource 9 [mem 0xfed08000-0xfed08fff window] [ 3.496606] pci_bus 0000:07: resource 10 [mem 0xfed0e000-0xfed0ffff window] [ 3.503567] pci_bus 0000:07: resource 11 [mem 0x80000000-0xfbffffff window] [ 3.510619] pci 0000:00:05.0: disabled boot interrupts on device [8086:0e28] [ 3.541488] pci 0000:00:1a.0: quirk_usb_early_handoff+0x0/0x750 took 23241 usecs [ 3.573476] pci 0000:00:1d.0: quirk_usb_early_handoff+0x0/0x750 took 23999 usecs [ 3.580981] PCI: CLS 64 bytes, default 64 [ 3.585024] DMAR: No SATC found [ 3.585058] Trying to unpack rootfs image as initramfs... [ 3.588173] DMAR: dmar0: Using Queued invalidation [ 3.588252] pci 0000:00:00.0: Adding to iommu group 0 [ 3.603485] pci 0000:00:01.0: Adding to iommu group 1 [ 3.608565] pci 0000:00:01.1: Adding to iommu group 2 [ 3.613647] pci 0000:00:03.0: Adding to iommu group 3 [ 3.618730] pci 0000:00:04.0: Adding to iommu group 4 [ 3.623807] pci 0000:00:04.1: Adding to iommu group 5 [ 3.628890] pci 0000:00:04.2: Adding to iommu group 6 [ 3.633969] pci 0000:00:04.3: Adding to iommu group 7 [ 3.639052] pci 0000:00:04.4: Adding to iommu group 8 [ 3.644131] pci 0000:00:04.5: Adding to iommu group 9 [ 3.649211] pci 0000:00:04.6: Adding to iommu group 10 [ 3.654376] pci 0000:00:04.7: Adding to iommu group 11 [ 3.659540] pci 0000:00:05.0: Adding to iommu group 12 [ 3.664706] pci 0000:00:05.2: Adding to iommu group 13 [ 3.669872] pci 0000:00:05.4: Adding to iommu group 14 [ 3.675037] pci 0000:00:11.0: Adding to iommu group 15 [ 3.680223] pci 0000:00:16.0: Adding to iommu group 16 [ 3.685402] pci 0000:00:16.1: Adding to iommu group 16 [ 3.690578] pci 0000:00:1a.0: Adding to iommu group 17 [ 3.695743] pci 0000:00:1c.0: Adding to iommu group 18 [ 3.700912] pci 0000:00:1c.1: Adding to iommu group 19 [ 3.706082] pci 0000:00:1d.0: Adding to iommu group 20 [ 3.711249] pci 0000:00:1e.0: Adding to iommu group 21 [ 3.716465] pci 0000:00:1f.0: Adding to iommu group 22 [ 3.721630] pci 0000:00:1f.2: Adding to iommu group 22 [ 3.726792] pci 0000:00:1f.3: Adding to iommu group 22 [ 3.731962] pci 0000:00:1f.6: Adding to iommu group 22 [ 3.737134] pci 0000:04:00.0: Adding to iommu group 23 [ 3.742301] pci 0000:05:00.0: Adding to iommu group 24 [ 3.747468] pci 0000:06:00.0: Adding to iommu group 25 [ 3.752619] pci 0000:07:01.0: Adding to iommu group 21 [ 3.757802] pci 0000:ff:08.0: Adding to iommu group 26 [ 3.762983] pci 0000:ff:09.0: Adding to iommu group 27 [ 3.768195] pci 0000:ff:0a.0: Adding to iommu group 28 [ 3.773364] pci 0000:ff:0a.1: Adding to iommu group 28 [ 3.778536] pci 0000:ff:0a.2: Adding to iommu group 28 [ 3.783705] pci 0000:ff:0a.3: Adding to iommu group 28 [ 3.788899] pci 0000:ff:0b.0: Adding to iommu group 29 [ 3.794071] pci 0000:ff:0b.3: Adding to iommu group 29 [ 3.799265] pci 0000:ff:0c.0: Adding to iommu group 30 [ 3.804435] pci 0000:ff:0c.1: Adding to iommu group 30 [ 3.809632] pci 0000:ff:0d.0: Adding to iommu group 31 [ 3.814807] pci 0000:ff:0d.1: Adding to iommu group 31 [ 3.820004] pci 0000:ff:0e.0: Adding to iommu group 32 [ 3.825174] pci 0000:ff:0e.1: Adding to iommu group 32 [ 3.830347] pci 0000:ff:0f.0: Adding to iommu group 33 [ 3.835518] pci 0000:ff:0f.1: Adding to iommu group 34 [ 3.840682] pci 0000:ff:0f.2: Adding to iommu group 35 [ 3.845849] pci 0000:ff:0f.3: Adding to iommu group 36 [ 3.851016] pci 0000:ff:0f.4: Adding to iommu group 37 [ 3.856186] pci 0000:ff:0f.5: Adding to iommu group 38 [ 3.861355] pci 0000:ff:10.0: Adding to iommu group 39 [ 3.866528] pci 0000:ff:10.1: Adding to iommu group 40 [ 3.871692] pci 0000:ff:10.2: Adding to iommu group 41 [ 3.876857] pci 0000:ff:10.3: Adding to iommu group 42 [ 3.882023] pci 0000:ff:10.4: Adding to iommu group 43 [ 3.887188] pci 0000:ff:10.5: Adding to iommu group 44 [ 3.892354] pci 0000:ff:10.6: Adding to iommu group 45 [ 3.897519] pci 0000:ff:10.7: Adding to iommu group 46 [ 3.902728] pci 0000:ff:13.0: Adding to iommu group 47 [ 3.907918] pci 0000:ff:13.1: Adding to iommu group 47 [ 3.913090] pci 0000:ff:13.4: Adding to iommu group 47 [ 3.918266] pci 0000:ff:13.5: Adding to iommu group 47 [ 3.923468] pci 0000:ff:16.0: Adding to iommu group 48 [ 3.928639] pci 0000:ff:16.1: Adding to iommu group 48 [ 3.933813] pci 0000:ff:16.2: Adding to iommu group 48 [ 3.942823] DMAR: Intel(R) Virtualization Technology for Directed I/O [ 3.949273] PCI-DMA: Using software bounce buffering for IO (SWIOTLB) [ 3.955715] software IO TLB: mapped [mem 0x0000000079e2c000-0x000000007de2c000] (64MB) [ 3.964224] Initialise system trusted keyrings [ 3.968685] Key type blacklist registered [ 3.972778] workingset: timestamp_bits=36 max_order=21 bucket_order=0 [ 3.981081] zbud: loaded [ 3.983940] integrity: Platform Keyring initialized [ 3.988832] integrity: Machine keyring initialized [ 3.993624] Key type asymmetric registered [ 3.997721] Asymmetric key parser 'x509' registered [ 4.030029] Freeing initrd memory: 39592K [ 4.041324] alg: self-tests for CTR-KDF (hmac(sha256)) passed [ 4.047106] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 248) [ 4.054539] io scheduler mq-deadline registered [ 4.061512] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4 [ 4.068324] Monitor-Mwait will be used to enter C-1 state [ 4.068338] Monitor-Mwait will be used to enter C-2 state [ 4.068344] ACPI: \_SB_.SCK0.C000: Found 2 idle states [ 4.078412] ERST: Error Record Serialization Table (ERST) support is initialized. [ 4.085899] pstore: Registered erst as persistent store backend [ 4.091987] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled [ 4.098420] 00:07: ttyS0 at I/O 0x3f8 (irq = 4, base_baud = 115200) is a 16550A [ 4.106537] 00:08: ttyS1 at I/O 0x2f8 (irq = 3, base_baud = 115200) is a 16550A [ 4.114760] Linux agpgart interface v0.103 [ 4.118992] AMD-Vi: AMD IOMMUv2 functionality not available on this system - This is not a bug. [ 4.128127] i8042: PNP: PS/2 Controller [PNP0f03:PS2M] at 0x60,0x64 irq 12 [ 4.135004] i8042: PNP: PS/2 controller doesn't have KBD irq; using default 1 [ 4.145055] serio: i8042 KBD port at 0x60,0x64 irq 1 [ 4.150034] serio: i8042 AUX port at 0x60,0x64 irq 12 [ 4.155280] mousedev: PS/2 mouse device common for all mice [ 4.160891] rtc_cmos 00:02: RTC can wake from S4 [ 4.165814] rtc_cmos 00:02: registered as rtc0 [ 4.170299] rtc_cmos 00:02: setting system clock to 2024-06-14T10:39:03 UTC (1718361543) [ 4.178424] rtc_cmos 00:02: alarms up to one month, y3k, 114 bytes nvram, hpet irqs [ 4.186247] intel_pstate: Intel P-state driver initializing [ 4.192146] ledtrig-cpu: registered to indicate activity on CPUs [ 4.215784] NET: Registered PF_INET6 protocol family [ 4.228616] Segment Routing with IPv6 [ 4.232312] In-situ OAM (IOAM) with IPv6 [ 4.236269] mip6: Mobile IPv6 [ 4.239246] NET: Registered PF_PACKET protocol family [ 4.244404] mpls_gso: MPLS GSO support [ 4.248685] microcode: sig=0x306e4, pf=0x8, revision=0x42e [ 4.254228] microcode: Microcode Update Driver: v2.2. [ 4.254236] IPI shorthand broadcast: enabled [ 4.263594] sched_clock: Marking stable (3274185067, 989370014)->(4637947379, -374392298) [ 4.272020] registered taskstats version 1 [ 4.276133] Loading compiled-in X.509 certificates [ 4.320710] Loaded X.509 cert 'Debian Secure Boot CA: 6ccece7e4c6c0d1f6149f3dd27dfcc5cbb419ea1' [ 4.329440] Loaded X.509 cert 'Debian Secure Boot Signer 2022 - linux: 14011249c2675ea8e5148542202005810584b25f' [ 4.340101] zswap: loaded using pool lzo/zbud [ 4.344686] Key type .fscrypt registered [ 4.348617] Key type fscrypt-provisioning registered [ 4.353882] pstore: Using crash dump compression: deflate [ 4.366824] Key type encrypted registered [ 4.370860] AppArmor: AppArmor sha1 policy hashing enabled [ 4.376358] ima: No TPM chip found, activating TPM-bypass! [ 4.381840] ima: Allocated hash algorithm: sha256 [ 4.386560] ima: No architecture policies found [ 4.391099] evm: Initialising EVM extended attributes: [ 4.396234] evm: security.selinux [ 4.399553] evm: security.SMACK64 (disabled) [ 4.403825] evm: security.SMACK64EXEC (disabled) [ 4.408445] evm: security.SMACK64TRANSMUTE (disabled) [ 4.413498] evm: security.SMACK64MMAP (disabled) [ 4.418118] evm: security.apparmor [ 4.421522] evm: security.ima [ 4.424493] evm: security.capability [ 4.428066] evm: HMAC attrs: 0x1 [ 4.610422] clk: Disabling unused clocks [ 4.616020] Freeing unused decrypted memory: 2036K [ 4.621477] Freeing unused kernel image (initmem) memory: 2796K [ 4.627497] Write protecting the kernel read-only data: 26624k [ 4.634038] Freeing unused kernel image (text/rodata gap) memory: 2040K [ 4.641008] Freeing unused kernel image (rodata/data gap) memory: 1180K [ 4.733751] x86/mm: Checked W+X mappings: passed, no W+X pages found. [ 4.740187] x86/mm: Checking user space page tables [ 4.819920] x86/mm: Checked W+X mappings: passed, no W+X pages found. [ 4.826365] Run /init as init process [ 4.830032] with arguments: [ 4.830034] /init [ 4.830036] with environment: [ 4.830037] HOME=/ [ 4.830038] TERM=linux [ 4.830039] BOOT_IMAGE=/vmlinuz-6.1.0-21-amd64 [ 4.997392] tsc: Refined TSC clocksource calibration: 1799.999 MHz [ 5.003589] clocksource: tsc: mask: 0xffffffffffffffff max_cycles: 0x19f228ab7a2, max_idle_ns: 440795289252 ns [ 5.013741] clocksource: Switched to clocksource tsc [ 5.060856] SCSI subsystem initialized [ 5.079719] ACPI: bus type USB registered [ 5.090721] usbcore: registered new interface driver usbfs [ 5.103961] i801_smbus 0000:00:1f.3: SMBus using PCI interrupt [ 5.105110] usbcore: registered new interface driver hub [ 5.108557] e1000e: Intel(R) PRO/1000 Network Driver [ 5.108559] e1000e: Copyright(c) 1999 - 2015 Intel Corporation. [ 5.108821] e1000e 0000:05:00.0: Interrupt Throttling Rate (ints/sec) set to dynamic conservative mode [ 5.109859] i2c i2c-0: 1/6 memory slots populated (from DMI) [ 5.115195] usbcore: registered new device driver usb [ 5.120114] i2c i2c-0: Systems with more than 4 memory slots not supported yet, not instantiating SPD [ 5.160398] e1000e 0000:05:00.0 0000:05:00.0 (uninitialized): registered PHC clock [ 5.161497] libata version 3.00 loaded. [ 5.170463] ehci-pci 0000:00:1a.0: EHCI Host Controller [ 5.175708] ehci-pci 0000:00:1a.0: new USB bus registered, assigned bus number 1 [ 5.183119] ehci-pci 0000:00:1a.0: debug port 2 [ 5.191304] ahci 0000:00:1f.2: version 3.0 [ 5.191628] ehci-pci 0000:00:1a.0: irq 16, io mem 0xfbb23000 [ 5.201590] ahci 0000:00:1f.2: AHCI 0001.0300 32 slots 6 ports 6 Gbps 0x3f impl SATA mode [ 5.209394] ehci-pci 0000:00:1a.0: USB 2.0 started, EHCI 1.00 [ 5.209777] ahci 0000:00:1f.2: flags: 64bit ncq sntf pm led clo pio slum part ems apst [ 5.215588] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 6.01 [ 5.225849] e1000e 0000:05:00.0 eth0: (PCI Express:2.5GT/s:Width x1) 00:25:90:eb:25:a6 [ 5.231778] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 5.231781] usb usb1: Product: EHCI Host Controller [ 5.239701] e1000e 0000:05:00.0 eth0: Intel(R) PRO/1000 Network Connection [ 5.246914] usb usb1: Manufacturer: Linux 6.1.0-21-amd64 ehci_hcd [ 5.251877] e1000e 0000:05:00.0 eth0: MAC: 3, PHY: 8, PBA No: FFFFFF-0FF [ 5.258667] usb usb1: SerialNumber: 0000:00:1a.0 [ 5.258867] hub 1-0:1.0: USB hub found [ 5.265016] e1000e 0000:06:00.0: Interrupt Throttling Rate (ints/sec) set to dynamic conservative mode [ 5.271471] hub 1-0:1.0: 2 ports detected [ 5.293506] ehci-pci 0000:00:1d.0: EHCI Host Controller [ 5.293647] isci: Intel(R) C600 SAS Controller Driver - version 1.2.0 [ 5.294120] scsi host0: ahci [ 5.294309] scsi host1: ahci [ 5.294462] scsi host2: ahci [ 5.294936] scsi host3: ahci [ 5.295243] scsi host4: ahci [ 5.295541] scsi host5: ahci [ 5.295599] ata1: SATA max UDMA/133 abar m2048@0xfbb21000 port 0xfbb21100 irq 32 [ 5.295603] ata2: SATA max UDMA/133 abar m2048@0xfbb21000 port 0xfbb21180 irq 32 [ 5.295606] ata3: SATA max UDMA/133 abar m2048@0xfbb21000 port 0xfbb21200 irq 32 [ 5.295608] ata4: SATA max UDMA/133 abar m2048@0xfbb21000 port 0xfbb21280 irq 32 [ 5.295611] ata5: SATA max UDMA/133 abar m2048@0xfbb21000 port 0xfbb21300 irq 32 [ 5.295613] ata6: SATA max UDMA/133 abar m2048@0xfbb21000 port 0xfbb21380 irq 32 [ 5.298751] ehci-pci 0000:00:1d.0: new USB bus registered, assigned bus number 2 [ 5.305222] isci 0000:04:00.0: driver configured for rev: 6 silicon [ 5.308093] ehci-pci 0000:00:1d.0: debug port 2 [ 5.329209] isci 0000:04:00.0: OEM parameter table found in OROM [ 5.332096] e1000e 0000:06:00.0 0000:06:00.0 (uninitialized): registered PHC clock [ 5.334782] ehci-pci 0000:00:1d.0: irq 23, io mem 0xfbb22000 [ 5.338169] isci 0000:04:00.0: OEM SAS parameters (version: 1.0) loaded (platform) [ 5.345732] isci 0000:04:00.0: SCU controller 0: phy 3-0 cables: {short, short, short, short} [ 5.349395] ehci-pci 0000:00:1d.0: USB 2.0 started, EHCI 1.00 [ 5.349468] usb usb2: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 6.01 [ 5.349471] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 5.349474] usb usb2: Product: EHCI Host Controller [ 5.349476] usb usb2: Manufacturer: Linux 6.1.0-21-amd64 ehci_hcd [ 5.349477] usb usb2: SerialNumber: 0000:00:1d.0 [ 5.349653] hub 2-0:1.0: USB hub found [ 5.349663] hub 2-0:1.0: 2 ports detected [ 5.406743] e1000e 0000:06:00.0 eth1: (PCI Express:2.5GT/s:Width x1) 00:25:90:eb:25:a7 [ 5.415490] scsi host6: isci [ 5.421253] e1000e 0000:06:00.0 eth1: Intel(R) PRO/1000 Network Connection [ 5.421342] e1000e 0000:06:00.0 eth1: MAC: 3, PHY: 8, PBA No: FFFFFF-0FF [ 5.561433] usb 1-1: new high-speed USB device number 2 using ehci-pci [ 5.605443] usb 2-1: new high-speed USB device number 2 using ehci-pci [ 5.608267] ata4: SATA link down (SStatus 0 SControl 300) [ 5.617393] ata5: SATA link down (SStatus 0 SControl 300) [ 5.622812] ata3: SATA link down (SStatus 0 SControl 300) [ 5.628230] ata6: SATA link down (SStatus 0 SControl 300) [ 5.633673] ata2: SATA link down (SStatus 0 SControl 300) [ 5.639141] ata1: SATA link up 6.0 Gbps (SStatus 133 SControl 300) [ 5.646121] ata1.00: ATA-8: WDC WD1003FBYZ-010FB0, 01.01V03, max UDMA/133 [ 5.653217] ata1.00: 1953525168 sectors, multi 16: LBA48 NCQ (depth 32), AA [ 5.661050] ata1.00: configured for UDMA/133 [ 5.665431] scsi: waiting for bus probes to complete ... [ 5.721805] usb 1-1: New USB device found, idVendor=8087, idProduct=0024, bcdDevice= 0.00 [ 5.729997] usb 1-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0 [ 5.737563] hub 1-1:1.0: USB hub found [ 5.741481] hub 1-1:1.0: 6 ports detected [ 5.782137] usb 2-1: New USB device found, idVendor=8087, idProduct=0024, bcdDevice= 0.00 [ 5.790334] usb 2-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0 [ 5.797970] hub 2-1:1.0: USB hub found [ 5.801883] hub 2-1:1.0: 8 ports detected [ 5.845684] scsi 0:0:0:0: Direct-Access ATA WDC WD1003FBYZ-0 1V03 PQ: 0 ANSI: 5 [ 5.856808] e1000e 0000:05:00.0 enx002590eb25a6: renamed from eth0 [ 5.881501] sd 0:0:0:0: [sda] 1953525168 512-byte logical blocks: (1.00 TB/932 GiB) [ 5.885794] e1000e 0000:06:00.0 enx002590eb25a7: renamed from eth1 [ 5.889192] sd 0:0:0:0: [sda] Write Protect is off [ 5.900137] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00 [ 5.900158] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 5.909230] sd 0:0:0:0: [sda] Preferred minimum I/O size 512 bytes [ 5.941958] sda: sda1 sda2 < sda5 > [ 5.945794] sd 0:0:0:0: [sda] Attached SCSI disk [ 6.033398] usb 1-1.1: new full-speed USB device number 3 using ehci-pci [ 6.147331] usb 1-1.1: New USB device found, idVendor=0557, idProduct=2221, bcdDevice= 0.01 [ 6.155702] usb 1-1.1: New USB device strings: Mfr=1, Product=2, SerialNumber=0 [ 6.163013] usb 1-1.1: Product: Hermon USB hidmouse Device [ 6.168500] usb 1-1.1: Manufacturer: Winbond Electronics Corp [ 6.189470] hid: raw HID events driver (C) Jiri Kosina [ 6.202474] usbcore: registered new interface driver usbhid [ 6.208065] usbhid: USB HID core driver [ 6.214655] input: Winbond Electronics Corp Hermon USB hidmouse Device as /devices/pci0000:00/0000:00:1a.0/usb1/1-1/1-1.1/1-1.1:1.0/0003:0557:2221.0001/input/input3 [ 6.229484] hid-generic 0003:0557:2221.0001: input,hidraw0: USB HID v1.00 Mouse [Winbond Electronics Corp Hermon USB hidmouse Device] on usb-0000:00:1a.0-1.1/input0 [ 6.244578] input: Winbond Electronics Corp Hermon USB hidmouse Device as /devices/pci0000:00/0000:00:1a.0/usb1/1-1/1-1.1/1-1.1:1.1/0003:0557:2221.0002/input/input4 [ 6.317679] hid-generic 0003:0557:2221.0002: input,hidraw1: USB HID v1.00 Keyboard [Winbond Electronics Corp Hermon USB hidmouse Device] on usb-0000:00:1a.0-1.1/input1 [ 6.336476] device-mapper: core: CONFIG_IMA_DISABLE_HTABLE is disabled. Duplicate IMA measurements will not be recorded in the IMA log. [ 6.348700] device-mapper: uevent: version 1.0.3 [ 6.353416] device-mapper: ioctl: 4.47.0-ioctl (2022-07-28) initialised: dm-devel@redhat.com [ 6.904399] PM: Image not found (code -22) [ 7.265066] EXT4-fs (dm-0): mounting ext3 file system using the ext4 subsystem [ 7.276722] EXT4-fs (dm-0): mounted filesystem with ordered data mode. Quota mode: none. [ 7.462950] Not activating Mandatory Access Control as /sbin/tomoyo-init does not exist. [ 9.152480] input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input5 [ 9.173002] dca service started, version 1.12.1 [ 9.175990] ACPI: button: Power Button [PWRB] [ 9.182073] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input6 [ 9.189531] ACPI: button: Power Button [PWRF] [ 9.258760] ioatdma: Intel(R) QuickData Technology Driver 5.00 [ 9.346479] input: PC Speaker as /devices/platform/pcspkr/input/input7 [ 9.407453] IPMI message handler: version 39.2 [ 9.415002] ipmi device interface [ 9.502832] RAPL PMU: API unit is 2^-32 Joules, 3 fixed counters, 163840 ms ovfl timer [ 9.510774] RAPL PMU: hw unit of domain pp0-core 2^-16 Joules [ 9.516539] RAPL PMU: hw unit of domain package 2^-16 Joules [ 9.522213] RAPL PMU: hw unit of domain dram 2^-16 Joules [ 9.534218] sd 0:0:0:0: Attached scsi generic sg0 type 0 [ 9.544208] mei_me 0000:00:16.0: Device doesn't have valid ME Interface [ 9.584101] ipmi_si: IPMI System Interface driver [ 9.588835] ipmi_si dmi-ipmi-si.0: ipmi_platform: probing via SMBIOS [ 9.595189] ipmi_platform: ipmi_si: SMBIOS: io 0xca2 regsize 1 spacing 1 irq 0 [ 9.602409] ipmi_si: Adding SMBIOS-specified kcs state machine [ 9.608312] ipmi_si IPI0001:00: ipmi_platform: probing via ACPI [ 9.608321] iTCO_vendor_support: vendor-support=0 [ 9.614355] ipmi_si IPI0001:00: ipmi_platform: [io 0x0ca2] regsize 1 spacing 1 irq 0 [ 9.627100] cryptd: max_cpu_qlen set to 1000 [ 9.661414] ipmi_si dmi-ipmi-si.0: Removing SMBIOS-specified kcs state machine in favor of ACPI [ 9.670118] ipmi_si: Adding ACPI-specified kcs state machine [ 9.675853] ipmi_si: Trying ACPI-specified kcs state machine at i/o address 0xca2, slave address 0x0, irq 0 [ 9.727347] iTCO_wdt iTCO_wdt.1.auto: unable to reset NO_REBOOT flag, device disabled by hardware/BIOS [ 9.755693] AVX version of gcm_enc/dec engaged. [ 9.760271] AES CTR mode by8 optimization enabled [ 9.791233] ACPI: bus type drm_connector registered [ 9.985432] ipmi_si IPI0001:00: The BMC does not support clearing the recv irq bit, compensating, but the BMC needs to be fixed. [ 10.066271] ipmi_si IPI0001:00: IPMI message handler: Found new BMC (man_id: 0x002a7c, prod_id: 0x0703, dev_id: 0x20) [ 10.077637] mgag200 0000:07:01.0: vgaarb: deactivate vga console [ 10.088776] Console: switching to colour dummy device 80x25 [ 10.100501] [drm] Initialized mgag200 1.0.0 20110418 for 0000:07:01.0 on minor 0 [ 10.109952] fbcon: mgag200drmfb (fb0) is primary device [ 10.112737] ipmi_si IPI0001:00: IPMI kcs interface initialized [ 10.217542] ipmi_ssif: IPMI SSIF Interface driver [ 10.477552] Console: switching to colour frame buffer device 128x48 [ 10.563498] mgag200 0000:07:01.0: [drm] fb0: mgag200drmfb frame buffer device [ 10.727742] EDAC sbridge: Seeking for: PCI ID 8086:0ea0 [ 10.727770] EDAC sbridge: Seeking for: PCI ID 8086:0ea0 [ 10.727776] EDAC sbridge: Seeking for: PCI ID 8086:0e60 [ 10.727784] EDAC sbridge: Seeking for: PCI ID 8086:0ea8 [ 10.727792] EDAC sbridge: Seeking for: PCI ID 8086:0ea8 [ 10.727796] EDAC sbridge: Seeking for: PCI ID 8086:0e71 [ 10.727804] EDAC sbridge: Seeking for: PCI ID 8086:0e71 [ 10.727808] EDAC sbridge: Seeking for: PCI ID 8086:0eaa [ 10.727816] EDAC sbridge: Seeking for: PCI ID 8086:0eaa [ 10.727819] EDAC sbridge: Seeking for: PCI ID 8086:0eab [ 10.727828] EDAC sbridge: Seeking for: PCI ID 8086:0eab [ 10.727831] EDAC sbridge: Seeking for: PCI ID 8086:0eac [ 10.727840] EDAC sbridge: Seeking for: PCI ID 8086:0eac [ 10.727843] EDAC sbridge: Seeking for: PCI ID 8086:0ead [ 10.727852] EDAC sbridge: Seeking for: PCI ID 8086:0ead [ 10.727855] EDAC sbridge: Seeking for: PCI ID 8086:0e68 [ 10.727863] EDAC sbridge: Seeking for: PCI ID 8086:0e79 [ 10.727870] EDAC sbridge: Seeking for: PCI ID 8086:0e6a [ 10.727878] EDAC sbridge: Seeking for: PCI ID 8086:0e6b [ 10.727885] EDAC sbridge: Seeking for: PCI ID 8086:0e6c [ 10.727893] EDAC sbridge: Seeking for: PCI ID 8086:0e6d [ 10.727901] EDAC sbridge: Seeking for: PCI ID 8086:0eb8 [ 10.727908] EDAC sbridge: Seeking for: PCI ID 8086:0ebc [ 10.727916] EDAC sbridge: Seeking for: PCI ID 8086:0ec8 [ 10.727926] EDAC sbridge: Seeking for: PCI ID 8086:0ec8 [ 10.727928] EDAC sbridge: Seeking for: PCI ID 8086:0ec9 [ 10.727937] EDAC sbridge: Seeking for: PCI ID 8086:0ec9 [ 10.727939] EDAC sbridge: Seeking for: PCI ID 8086:0eca [ 10.727949] EDAC sbridge: Seeking for: PCI ID 8086:0eca [ 10.728091] EDAC MC0: Giving out device to module sb_edac controller Ivy Bridge SrcID#0_Ha#0: DEV 0000:ff:0e.0 (INTERRUPT) [ 10.739170] EDAC sbridge: Ver: 1.1.2 [ 10.895446] intel_rapl_common: Found RAPL domain package [ 10.900802] intel_rapl_common: Found RAPL domain core [ 10.905873] intel_rapl_common: Found RAPL domain dram [ 12.126050] EXT4-fs (dm-0): re-mounted. Quota mode: none. [ 13.270198] EXT4-fs (sda1): mounting ext3 file system using the ext4 subsystem [ 13.300456] EXT4-fs (sda1): mounted filesystem with ordered data mode. Quota mode: none. [ 13.357265] Adding 1949692k swap on /dev/mapper/fiano1--vg-swap_1. Priority:-2 extents:1 across:1949692k FS [ 14.009466] audit: type=1400 audit(1718361553.076:2): apparmor="STATUS" operation="profile_load" profile="unconfined" name="nvidia_modprobe" pid=1067 comm="apparmor_parser" [ 14.024861] audit: type=1400 audit(1718361553.076:3): apparmor="STATUS" operation="profile_load" profile="unconfined" name="nvidia_modprobe//kmod" pid=1067 comm="apparmor_parser" [ 14.040757] audit: type=1400 audit(1718361553.080:4): apparmor="STATUS" operation="profile_load" profile="unconfined" name="lsb_release" pid=1066 comm="apparmor_parser" [ 14.085335] audit: type=1400 audit(1718361553.148:5): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/bin/man" pid=1069 comm="apparmor_parser" [ 14.101119] audit: type=1400 audit(1718361553.152:6): apparmor="STATUS" operation="profile_load" profile="unconfined" name="man_filter" pid=1069 comm="apparmor_parser" [ 14.116062] audit: type=1400 audit(1718361553.152:7): apparmor="STATUS" operation="profile_load" profile="unconfined" name="man_groff" pid=1069 comm="apparmor_parser" [ 14.250981] audit: type=1400 audit(1718361553.316:8): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/sbin/ntpd" pid=1079 comm="apparmor_parser" [ 14.340567] audit: type=1400 audit(1718361553.404:9): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=1068 comm="apparmor_parser" [ 14.358555] audit: type=1400 audit(1718361553.408:10): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/NetworkManager/nm-dhcp-helper" pid=1068 comm="apparmor_parser" [ 14.376004] audit: type=1400 audit(1718361553.408:11): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/connman/scripts/dhclient-script" pid=1068 comm="apparmor_parser" [ 17.366472] e1000e 0000:05:00.0 enx002590eb25a6: NIC Link is Up 1000 Mbps Full Duplex, Flow Control: None [ 17.376393] IPv6: ADDRCONF(NETDEV_CHANGE): enx002590eb25a6: link becomes ready