[ 0.000000] Linux version 6.1.93+ (osstest@himrod1) (gcc (Debian 12.2.0-14) 12.2.0, GNU ld (GNU Binutils for Debian) 2.40) #1 SMP PREEMPT_DYNAMIC Sat Jun 15 02:53:52 UTC 2024 [ 0.000000] Command line: placeholder root=/dev/mapper/debina0--vg-root ro console=hvc0 [ 0.000000] Released 0 page(s) [ 0.000000] BIOS-provided physical RAM map: [ 0.000000] Xen: [mem 0x0000000000000000-0x0000000000099fff] usable [ 0.000000] Xen: [mem 0x000000000009ac00-0x00000000000fffff] reserved [ 0.000000] Xen: [mem 0x0000000000100000-0x0000000020065fff] usable [ 0.000000] Xen: [mem 0x00000000796ef000-0x00000000798bdfff] reserved [ 0.000000] Xen: [mem 0x00000000799b7000-0x0000000079e5afff] ACPI NVS [ 0.000000] Xen: [mem 0x0000000079e5b000-0x000000007bdb0fff] reserved [ 0.000000] Xen: [mem 0x000000007bdb2000-0x000000007be37fff] reserved [ 0.000000] Xen: [mem 0x0000000080000000-0x000000008fffffff] reserved [ 0.000000] Xen: [mem 0x00000000fbffc000-0x00000000fbffcfff] reserved [ 0.000000] Xen: [mem 0x00000000fec00000-0x00000000fec00fff] reserved [ 0.000000] Xen: [mem 0x00000000fed1c000-0x00000000fed1ffff] reserved [ 0.000000] Xen: [mem 0x00000000fee00000-0x00000000feefffff] reserved [ 0.000000] Xen: [mem 0x00000000ff000000-0x00000000ffffffff] reserved [ 0.000000] NX (Execute Disable) protection: active [ 0.000000] SMBIOS 2.8 present. [ 0.000000] DMI: Supermicro SYS-5018D-FN8T/X10SDV-TP8F, BIOS 1.0b 11/21/2016 [ 0.000000] Hypervisor detected: Xen PV [ 0.000461] tsc: Detected 2199.998 MHz processor [ 0.000901] e820: update [mem 0x00000000-0x00000fff] usable ==> reserved [ 0.000904] e820: remove [mem 0x000a0000-0x000fffff] usable [ 0.000911] last_pfn = 0x20066 max_arch_pfn = 0x400000000 [ 0.000912] Disabled [ 0.000913] x86/PAT: MTRRs disabled, skipping PAT initialization too. [ 0.000918] x86/PAT: Configuration [0-7]: WB WT UC- UC WC WP UC UC [ 0.000957] Kernel/User page tables isolation: disabled on XEN PV. [ 0.027670] RAMDISK: [mem 0x04000000-0x0536afff] [ 0.027679] ACPI: Early table checksum verification disabled [ 0.028279] ACPI: RSDP 0x00000000000F0580 000024 (v02 SUPERM) [ 0.028291] ACPI: XSDT 0x00000000799FF098 0000B4 (v01 SUPERM SMCI--MB 01072009 AMI 00010013) [ 0.028328] ACPI: FACP 0x0000000079A17AC0 00010C (v05 SUPERM SMCI--MB 01072009 AMI 00010013) [ 0.028376] ACPI: DSDT 0x00000000799FF1E8 0188D5 (v02 SUPERM SMCI--MB 01072009 INTL 20091013) [ 0.028392] ACPI: FACS 0x0000000079E59F80 000040 [ 0.028407] ACPI: APIC 0x0000000079A17BD0 0000BC (v03 SUPERM SMCI--MB 01072009 AMI 00010013) [ 0.028423] ACPI: FPDT 0x0000000079A17C90 000044 (v01 SUPERM SMCI--MB 01072009 AMI 00010013) [ 0.028439] ACPI: FIDT 0x0000000079A17CD8 00009C (v01 SUPERM SMCI--MB 01072009 AMI 00010013) [ 0.028455] ACPI: MCFG 0x0000000079A17D78 00003C (v01 SUPERM SMCI--MB 01072009 MSFT 00000097) [ 0.028471] ACPI: UEFI 0x0000000079A17DB8 000042 (v01 00000000 00000000) [ 0.028487] ACPI: DBG2 0x0000000079A17E00 000072 (v00 SUPERM SMCI--MB 00000000 INTL 20091013) [ 0.028503] ACPI: HPET 0x0000000079A17E78 000038 (v01 SUPERM SMCI--MB 00000001 INTL 20091013) [ 0.028519] ACPI: WDDT 0x0000000079A17EB0 000040 (v01 SUPERM SMCI--MB 00000000 INTL 20091013) [ 0.028535] ACPI: SSDT 0x0000000079A17EF0 00ED8B (v01 AMI PmMgt 00000001 INTL 20120913) [ 0.028552] ACPI: SSDT 0x0000000079A26C80 002285 (v02 SUPERM SpsNm 00000002 INTL 20120913) [ 0.028568] ACPI: SSDT 0x0000000079A28F08 000064 (v02 SUPERM SpsNvs 00000002 INTL 20120913) [ 0.028584] ACPI: PRAD 0x0000000079A28F70 000102 (v02 SUPERM SMCI--MB 00000002 INTL 20120913) [ 0.028600] ACPI: RMAD 0x0000000079A29078 0000CC (v01 SUPERM SMCI--MB 00000001 INTL 20091013) [ 0.028616] ACPI: HEST 0x0000000079A29148 0000A8 (v01 SUPERM SMCI--MB 00000001 INTL 00000001) [ 0.028632] ACPI: BERT 0x0000000079A291F0 000030 (v01 SUPERM SMCI--MB 00000001 INTL 00000001) [ 0.028648] ACPI: ERST 0x0000000079A29220 000230 (v01 SUPERM SMCI--MB 00000001 INTL 00000001) [ 0.028663] ACPI: EINJ 0x0000000079A29450 000130 (v01 SUPERM SMCI--MB 00000001 INTL 00000001) [ 0.028672] ACPI: Reserving FACP table memory at [mem 0x79a17ac0-0x79a17bcb] [ 0.028674] ACPI: Reserving DSDT table memory at [mem 0x799ff1e8-0x79a17abc] [ 0.028675] ACPI: Reserving FACS table memory at [mem 0x79e59f80-0x79e59fbf] [ 0.028676] ACPI: Reserving APIC table memory at [mem 0x79a17bd0-0x79a17c8b] [ 0.028677] ACPI: Reserving FPDT table memory at [mem 0x79a17c90-0x79a17cd3] [ 0.028678] ACPI: Reserving FIDT table memory at [mem 0x79a17cd8-0x79a17d73] [ 0.028679] ACPI: Reserving MCFG table memory at [mem 0x79a17d78-0x79a17db3] [ 0.028680] ACPI: Reserving UEFI table memory at [mem 0x79a17db8-0x79a17df9] [ 0.028681] ACPI: Reserving DBG2 table memory at [mem 0x79a17e00-0x79a17e71] [ 0.028682] ACPI: Reserving HPET table memory at [mem 0x79a17e78-0x79a17eaf] [ 0.028682] ACPI: Reserving WDDT table memory at [mem 0x79a17eb0-0x79a17eef] [ 0.028683] ACPI: Reserving SSDT table memory at [mem 0x79a17ef0-0x79a26c7a] [ 0.028684] ACPI: Reserving SSDT table memory at [mem 0x79a26c80-0x79a28f04] [ 0.028685] ACPI: Reserving SSDT table memory at [mem 0x79a28f08-0x79a28f6b] [ 0.028686] ACPI: Reserving PRAD table memory at [mem 0x79a28f70-0x79a29071] [ 0.028687] ACPI: Reserving RMAD table memory at [mem 0x79a29078-0x79a29143] [ 0.028688] ACPI: Reserving HEST table memory at [mem 0x79a29148-0x79a291ef] [ 0.028689] ACPI: Reserving BERT table memory at [mem 0x79a291f0-0x79a2921f] [ 0.028690] ACPI: Reserving ERST table memory at [mem 0x79a29220-0x79a2944f] [ 0.028691] ACPI: Reserving EINJ table memory at [mem 0x79a29450-0x79a2957f] [ 0.028737] Setting APIC routing to Xen PV. [ 0.032689] Zone ranges: [ 0.032691] DMA [mem 0x0000000000001000-0x0000000000ffffff] [ 0.032693] DMA32 [mem 0x0000000001000000-0x0000000020065fff] [ 0.032695] Normal empty [ 0.032696] Movable zone start for each node [ 0.032697] Early memory node ranges [ 0.032697] node 0: [mem 0x0000000000001000-0x0000000000099fff] [ 0.032699] node 0: [mem 0x0000000000100000-0x0000000020065fff] [ 0.032701] Initmem setup node 0 [mem 0x0000000000001000-0x0000000020065fff] [ 0.032706] On node 0, zone DMA: 1 pages in unavailable ranges [ 0.032743] On node 0, zone DMA: 102 pages in unavailable ranges [ 0.034291] On node 0, zone DMA32: 32666 pages in unavailable ranges [ 0.034296] p2m virtual area at (____ptrval____), size is 40000000 [ 0.221792] Remapped 102 page(s) [ 0.223168] ACPI: PM-Timer IO Port: 0x408 [ 0.223220] ACPI: LAPIC_NMI (acpi_id[0x00] high level lint[0x1]) [ 0.223223] ACPI: LAPIC_NMI (acpi_id[0x02] high level lint[0x1]) [ 0.223225] ACPI: LAPIC_NMI (acpi_id[0x04] high level lint[0x1]) [ 0.223226] ACPI: LAPIC_NMI (acpi_id[0x06] high level lint[0x1]) [ 0.223228] ACPI: LAPIC_NMI (acpi_id[0x01] high level lint[0x1]) [ 0.223229] ACPI: LAPIC_NMI (acpi_id[0x03] high level lint[0x1]) [ 0.223231] ACPI: LAPIC_NMI (acpi_id[0x05] high level lint[0x1]) [ 0.223232] ACPI: LAPIC_NMI (acpi_id[0x07] high level lint[0x1]) [ 0.223260] IOAPIC[0]: apic_id 8, version 32, address 0xfec00000, GSI 0-23 [ 0.223274] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl) [ 0.223277] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level) [ 0.223303] ACPI: Using ACPI (MADT) for SMP configuration information [ 0.223307] ACPI: HPET id: 0x8086a701 base: 0xfed00000 [ 0.223377] smpboot: Allowing 8 CPUs, 0 hotplug CPUs [ 0.223391] PM: hibernation: Registered nosave memory: [mem 0x00000000-0x00000fff] [ 0.223394] PM: hibernation: Registered nosave memory: [mem 0x0009a000-0x0009afff] [ 0.223395] PM: hibernation: Registered nosave memory: [mem 0x0009b000-0x000fffff] [ 0.223397] [mem 0x90000000-0xfbffbfff] available for PCI devices [ 0.223402] Booting kernel on Xen [ 0.223402] Xen version: 4.19-unstable (preserve-AD) [ 0.223405] clocksource: refined-jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 1910969940391419 ns [ 0.229647] setup_percpu: NR_CPUS:64 nr_cpumask_bits:8 nr_cpu_ids:8 nr_node_ids:1 [ 0.229931] percpu: Embedded 54 pages/cpu s180520 r8192 d32472 u262144 [ 0.229937] pcpu-alloc: s180520 r8192 d32472 u262144 alloc=1*2097152 [ 0.229941] pcpu-alloc: [0] 0 1 2 3 4 5 6 7 [ 0.230020] xen: PV spinlocks enabled [ 0.230024] PV qspinlock hash table entries: 256 (order: 0, 4096 bytes, linear) [ 0.230029] Built 1 zonelists, mobility grouping on. Total pages: 129006 [ 0.230031] Kernel command line: placeholder root=/dev/mapper/debina0--vg-root ro console=hvc0 [ 0.230068] Unknown kernel command line parameters "placeholder", will be passed to user space. [ 0.230077] random: crng init done [ 0.230126] Dentry cache hash table entries: 65536 (order: 7, 524288 bytes, linear) [ 0.230151] Inode-cache hash table entries: 32768 (order: 6, 262144 bytes, linear) [ 0.231473] mem auto-init: stack:all(zero), heap alloc:off, heap free:off [ 0.231475] software IO TLB: area num 8. [ 0.290937] Memory: 390032K/524284K available (14349K kernel code, 2682K rwdata, 4576K rodata, 1580K init, 1296K bss, 134000K reserved, 0K cma-reserved) [ 0.291104] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=8, Nodes=1 [ 0.293607] Dynamic Preempt: voluntary [ 0.293707] rcu: Preemptible hierarchical RCU implementation. [ 0.293708] rcu: RCU event tracing is enabled. [ 0.293709] rcu: RCU restricting CPUs from NR_CPUS=64 to nr_cpu_ids=8. [ 0.293710] Trampoline variant of Tasks RCU enabled. [ 0.293711] rcu: RCU calculated value of scheduler-enlistment delay is 100 jiffies. [ 0.293712] rcu: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=8 [ 0.304247] NR_IRQS: 4352, nr_irqs: 488, preallocated irqs: 16 [ 0.304372] xen:events: Using FIFO-based ABI [ 0.304395] xen: --> pirq=1 -> irq=1 (gsi=1) [ 0.304403] xen: --> pirq=2 -> irq=2 (gsi=2) [ 0.304411] xen: --> pirq=3 -> irq=3 (gsi=3) [ 0.304418] xen: --> pirq=4 -> irq=4 (gsi=4) [ 0.304425] xen: --> pirq=5 -> irq=5 (gsi=5) [ 0.304433] xen: --> pirq=6 -> irq=6 (gsi=6) [ 0.304440] xen: --> pirq=7 -> irq=7 (gsi=7) [ 0.304447] xen: --> pirq=8 -> irq=8 (gsi=8) [ 0.304454] xen: --> pirq=9 -> irq=9 (gsi=9) [ 0.304461] xen: --> pirq=10 -> irq=10 (gsi=10) [ 0.304469] xen: --> pirq=11 -> irq=11 (gsi=11) [ 0.304476] xen: --> pirq=12 -> irq=12 (gsi=12) [ 0.304483] xen: --> pirq=13 -> irq=13 (gsi=13) [ 0.304492] xen: --> pirq=14 -> irq=14 (gsi=14) [ 0.304499] xen: --> pirq=15 -> irq=15 (gsi=15) [ 0.304510] rcu: srcu_init: Setting srcu_struct sizes based on contention. [ 0.309875] Console: colour VGA+ 80x25 [ 0.324572] printk: console [tty0] enabled [ 0.325902] printk: console [hvc0] enabled [ 0.326040] ACPI: Core revision 20220331 [ 0.341480] clocksource: xen: mask: 0xffffffffffffffff max_cycles: 0x1cd42e4dffb, max_idle_ns: 881590591483 ns [ 0.341649] Xen: using vcpuop timer interface [ 0.341656] installing Xen timer for CPU 0 [ 0.341806] clocksource: tsc-early: mask: 0xffffffffffffffff max_cycles: 0x1fb63109b96, max_idle_ns: 440795265316 ns [ 0.341964] Calibrating delay loop (skipped), value calculated using timer frequency.. 4399.99 BogoMIPS (lpj=2199998) [ 0.342293] Last level iTLB entries: 4KB 64, 2MB 8, 4MB 8 [ 0.342409] Last level dTLB entries: 4KB 64, 2MB 0, 4MB 0, 1GB 4 [ 0.342536] Spectre V1 : Mitigation: usercopy/swapgs barriers and __user pointer sanitization [ 0.342684] Spectre V2 : Mitigation: Retpolines [ 0.342970] Spectre V2 : Spectre v2 / SpectreRSB mitigation: Filling RSB on context switch [ 0.343120] Spectre V2 : Spectre v2 / SpectreRSB : Filling RSB on VMEXIT [ 0.343238] Spectre V2 : Enabling Restricted Speculation for firmware calls [ 0.343359] Spectre V2 : mitigation: Enabling conditional Indirect Branch Prediction Barrier [ 0.343507] Spectre V2 : User space: Mitigation: STIBP via prctl [ 0.343625] Speculative Store Bypass: Mitigation: Speculative Store Bypass disabled via prctl [ 0.343776] MDS: Mitigation: Clear CPU buffers [ 0.343888] TAA: Mitigation: Clear CPU buffers [ 0.343968] MMIO Stale Data: Vulnerable: Clear CPU buffers attempted, no microcode [ 0.344133] x86/fpu: Supporting XSAVE feature 0x001: 'x87 floating point registers' [ 0.344278] x86/fpu: Supporting XSAVE feature 0x002: 'SSE registers' [ 0.344403] x86/fpu: Supporting XSAVE feature 0x004: 'AVX registers' [ 0.344522] x86/fpu: xstate_offset[2]: 576, xstate_sizes[2]: 256 [ 0.344641] x86/fpu: Enabled xstate features 0x7, context size is 832 bytes, using 'standard' format. [ 0.362408] Freeing SMP alternatives memory: 40K [ 0.362535] pid_max: default: 32768 minimum: 301 [ 0.362985] LSM: Security Framework initializing [ 0.363108] SELinux: Initializing. [ 0.363247] Mount-cache hash table entries: 1024 (order: 1, 8192 bytes, linear) [ 0.363412] Mountpoint-cache hash table entries: 1024 (order: 1, 8192 bytes, linear) [ 0.364056] cpu 0 spinlock event irq 25 [ 0.364176] VPMU disabled by hypervisor. [ 0.364611] cblist_init_generic: Setting adjustable number of callback queues. [ 0.364756] cblist_init_generic: Setting shift to 3 and lim to 1. [ 0.364912] Performance Events: unsupported p6 CPU model 86 no PMU driver, software events only. [ 0.364969] signal: max sigframe size: 1776 [ 0.365132] rcu: Hierarchical SRCU implementation. [ 0.365264] rcu: Max phase no-delay instances is 400. [ 0.365758] smp: Bringing up secondary CPUs ... [ 0.366092] installing Xen timer for CPU 1 [ 0.366560] cpu 1 spinlock event irq 35 [ 0.367105] MDS CPU bug present and SMT on, data leak possible. See https://www.kernel.org/doc/html/latest/admin-guide/hw-vuln/mds.html for more details. [ 0.367272] TAA CPU bug present and SMT on, data leak possible. See https://www.kernel.org/doc/html/latest/admin-guide/hw-vuln/tsx_async_abort.html for more details. [ 0.367459] MMIO Stale Data CPU bug present and SMT on, data leak possible. See https://www.kernel.org/doc/html/latest/admin-guide/hw-vuln/processor_mmio_stale_data.html for more details. [ 0.368188] installing Xen timer for CPU 2 [ 0.368657] cpu 2 spinlock event irq 41 [ 0.369057] installing Xen timer for CPU 3 [ 0.369517] cpu 3 spinlock event irq 47 [ 0.369517] installing Xen timer for CPU 4 [ 0.370317] cpu 4 spinlock event irq 53 [ 0.370317] installing Xen timer for CPU 5 [ 0.371147] cpu 5 spinlock event irq 59 [ 0.371171] installing Xen timer for CPU 6 [ 0.372027] cpu 6 spinlock event irq 65 [ 0.372220] installing Xen timer for CPU 7 [ 0.372651] cpu 7 spinlock event irq 71 [ 0.373210] smp: Brought up 1 node, 8 CPUs [ 0.373328] smpboot: Max logical packages: 1 [ 0.373546] devtmpfs: initialized [ 0.373546] x86/mm: Memory block size: 128MB [ 0.374309] ACPI: PM: Registering ACPI NVS region [mem 0x799b7000-0x79e5afff] (4866048 bytes) [ 0.374309] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 1911260446275000 ns [ 0.374414] futex hash table entries: 2048 (order: 5, 131072 bytes, linear) [ 0.375056] PM: RTC time: 03:12:24, date: 2024-06-15 [ 0.375322] NET: Registered PF_NETLINK/PF_ROUTE protocol family [ 0.375465] xen:grant_table: Grant tables using version 1 layout [ 0.375602] Grant table initialized [ 0.375904] audit: initializing netlink subsys (disabled) [ 0.376014] audit: type=2000 audit(1718421144.231:1): state=initialized audit_enabled=0 res=1 [ 0.376058] thermal_sys: Registered thermal governor 'step_wise' [ 0.376058] thermal_sys: Registered thermal governor 'user_space' [ 0.376174] ACPI FADT declares the system doesn't support PCIe ASPM, so disable it [ 0.376604] PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0x80000000-0x8fffffff] (base 0x80000000) [ 0.376976] PCI: MMCONFIG at [mem 0x80000000-0x8fffffff] reserved in E820 [ 0.506643] PCI: Using configuration type 1 for base access [ 0.509302] kprobes: kprobe jump-optimization is enabled. All kprobes are optimized if possible. [ 0.510036] ACPI: Added _OSI(Module Device) [ 0.510143] ACPI: Added _OSI(Processor Device) [ 0.510262] ACPI: Added _OSI(3.0 _SCP Extensions) [ 0.510406] ACPI: Added _OSI(Processor Aggregator Device) [ 0.539817] ACPI: 4 ACPI AML tables successfully acquired and loaded [ 0.541823] xen: registering gsi 9 triggering 0 polarity 0 [ 0.544571] ACPI: Dynamic OEM Table Load: [ 0.555007] ACPI: Interpreter enabled [ 0.555141] ACPI: PM: (supports S0 S4 S5) [ 0.555253] ACPI: Using IOAPIC for interrupt routing [ 0.555398] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug [ 0.555547] PCI: Using E820 reservations for host bridge windows [ 0.556127] ACPI: Enabled 6 GPEs in block 00 to 3F [ 0.589314] ACPI: PCI Root Bridge [UNC0] (domain 0000 [bus ff]) [ 0.589443] acpi PNP0A03:03: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI HPX-Type3] [ 0.589679] acpi PNP0A03:03: _OSC: platform does not support [LTR] [ 0.589942] acpi PNP0A03:03: _OSC: OS now controls [PME PCIeCapability] [ 0.589968] acpi PNP0A03:03: FADT indicates ASPM is unsupported, using BIOS configuration [ 0.590149] PCI host bridge to bus 0000:ff [ 0.590271] pci_bus 0000:ff: root bus resource [bus ff] [ 0.590463] pci 0000:ff:0b.0: [8086:6f81] type 00 class 0x088000 [ 0.590910] pci 0000:ff:0b.1: [8086:6f36] type 00 class 0x110100 [ 0.591276] pci 0000:ff:0b.2: [8086:6f37] type 00 class 0x110100 [ 0.591726] pci 0000:ff:0b.3: [8086:6f76] type 00 class 0x088000 [ 0.592167] pci 0000:ff:0c.0: [8086:6fe0] type 00 class 0x088000 [ 0.592589] pci 0000:ff:0c.1: [8086:6fe1] type 00 class 0x088000 [ 0.593043] pci 0000:ff:0c.2: [8086:6fe2] type 00 class 0x088000 [ 0.593465] pci 0000:ff:0c.3: [8086:6fe3] type 00 class 0x088000 [ 0.593912] pci 0000:ff:0f.0: [8086:6ff8] type 00 class 0x088000 [ 0.594310] pci 0000:ff:0f.4: [8086:6ffc] type 00 class 0x088000 [ 0.594733] pci 0000:ff:0f.5: [8086:6ffd] type 00 class 0x088000 [ 0.595159] pci 0000:ff:0f.6: [8086:6ffe] type 00 class 0x088000 [ 0.595612] pci 0000:ff:10.0: [8086:6f1d] type 00 class 0x088000 [ 0.596038] pci 0000:ff:10.1: [8086:6f34] type 00 class 0x110100 [ 0.596473] pci 0000:ff:10.5: [8086:6f1e] type 00 class 0x088000 [ 0.596914] pci 0000:ff:10.6: [8086:6f7d] type 00 class 0x110100 [ 0.597270] pci 0000:ff:10.7: [8086:6f1f] type 00 class 0x088000 [ 0.597701] pci 0000:ff:12.0: [8086:6fa0] type 00 class 0x088000 [ 0.597954] pci 0000:ff:12.1: [8086:6f30] type 00 class 0x110100 [ 0.598446] pci 0000:ff:13.0: [8086:6fa8] type 00 class 0x088000 [ 0.598917] pci 0000:ff:13.1: [8086:6f71] type 00 class 0x088000 [ 0.599315] pci 0000:ff:13.2: [8086:6faa] type 00 class 0x088000 [ 0.599813] pci 0000:ff:13.3: [8086:6fab] type 00 class 0x088000 [ 0.600281] pci 0000:ff:13.4: [8086:6fac] type 00 class 0x088000 [ 0.600747] pci 0000:ff:13.5: [8086:6fad] type 00 class 0x088000 [ 0.601236] pci 0000:ff:13.6: [8086:6fae] type 00 class 0x088000 [ 0.601659] pci 0000:ff:13.7: [8086:6faf] type 00 class 0x088000 [ 0.602092] pci 0000:ff:14.0: [8086:6fb0] type 00 class 0x088000 [ 0.602585] pci 0000:ff:14.1: [8086:6fb1] type 00 class 0x088000 [ 0.603055] pci 0000:ff:14.2: [8086:6fb2] type 00 class 0x088000 [ 0.603522] pci 0000:ff:14.3: [8086:6fb3] type 00 class 0x088000 [ 0.604017] pci 0000:ff:14.4: [8086:6fbc] type 00 class 0x088000 [ 0.604442] pci 0000:ff:14.5: [8086:6fbd] type 00 class 0x088000 [ 0.604865] pci 0000:ff:14.6: [8086:6fbe] type 00 class 0x088000 [ 0.605301] pci 0000:ff:14.7: [8086:6fbf] type 00 class 0x088000 [ 0.605733] pci 0000:ff:15.0: [8086:6fb4] type 00 class 0x088000 [ 0.606203] pci 0000:ff:15.1: [8086:6fb5] type 00 class 0x088000 [ 0.606697] pci 0000:ff:15.2: [8086:6fb6] type 00 class 0x088000 [ 0.607171] pci 0000:ff:15.3: [8086:6fb7] type 00 class 0x088000 [ 0.607688] pci 0000:ff:1e.0: [8086:6f98] type 00 class 0x088000 [ 0.607688] pci 0000:ff:1e.1: [8086:6f99] type 00 class 0x088000 [ 0.607688] pci 0000:ff:1e.2: [8086:6f9a] type 00 class 0x088000 [ 0.607962] pci 0000:ff:1e.3: [8086:6fc0] type 00 class 0x088000 [ 0.607962] pci 0000:ff:1e.4: [8086:6f9c] type 00 class 0x088000 [ 0.607962] pci 0000:ff:1f.0: [8086:6f88] type 00 class 0x088000 [ 0.609129] pci 0000:ff:1f.2: [8086:6f8a] type 00 class 0x088000 [ 0.609573] pci_bus 0000:ff: on NUMA node 0 [ 0.613903] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-fe]) [ 0.613970] acpi PNP0A08:00: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI HPX-Type3] [ 0.614246] acpi PNP0A08:00: _OSC: platform does not support [PME LTR] [ 0.614586] acpi PNP0A08:00: _OSC: OS now controls [PCIeCapability] [ 0.614706] acpi PNP0A08:00: FADT indicates ASPM is unsupported, using BIOS configuration [ 0.615200] PCI host bridge to bus 0000:00 [ 0.615314] pci_bus 0000:00: root bus resource [io 0x0000-0x0cf7 window] [ 0.615435] pci_bus 0000:00: root bus resource [io 0x1000-0xffff window] [ 0.615555] pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff window] [ 0.615699] pci_bus 0000:00: root bus resource [mem 0x90000000-0xfbffbfff window] [ 0.615843] pci_bus 0000:00: root bus resource [bus 00-fe] [ 0.616029] pci 0000:00:00.0: [8086:6f00] type 00 class 0x060000 [ 0.616696] pci 0000:00:01.0: [8086:6f02] type 01 class 0x060400 [ 0.617219] pci 0000:00:01.0: PME# supported from D0 D3hot D3cold [ 0.617586] pci 0000:00:01.1: [8086:6f03] type 01 class 0x060400 [ 0.618135] pci 0000:00:01.1: PME# supported from D0 D3hot D3cold [ 0.618523] pci 0000:00:02.0: [8086:6f04] type 01 class 0x060400 [ 0.619038] pci 0000:00:02.0: PME# supported from D0 D3hot D3cold [ 0.619424] pci 0000:00:02.2: [8086:6f06] type 01 class 0x060400 [ 0.619940] pci 0000:00:02.2: PME# supported from D0 D3hot D3cold [ 0.620225] pci 0000:00:03.0: [8086:6f08] type 01 class 0x060400 [ 0.620776] pci 0000:00:03.0: PME# supported from D0 D3hot D3cold [ 0.621144] pci 0000:00:03.2: [8086:6f0a] type 01 class 0x060400 [ 0.621664] pci 0000:00:03.2: PME# supported from D0 D3hot D3cold [ 0.622067] pci 0000:00:05.0: [8086:6f28] type 00 class 0x088000 [ 0.622641] pci 0000:00:05.1: [8086:6f29] type 00 class 0x088000 [ 0.623295] pci 0000:00:05.2: [8086:6f2a] type 00 class 0x088000 [ 0.623960] pci 0000:00:14.0: [8086:8c31] type 00 class 0x0c0330 [ 0.624174] pci 0000:00:14.0: reg 0x10: [mem 0xfb600000-0xfb60ffff 64bit] [ 0.624663] pci 0000:00:14.0: PME# supported from D3hot D3cold [ 0.625003] pci 0000:00:16.0: [8086:8c3a] type 00 class 0x078000 [ 0.625221] pci 0000:00:16.0: reg 0x10: [mem 0xfb617000-0xfb61700f 64bit] [ 0.625683] pci 0000:00:16.0: PME# supported from D0 D3hot D3cold [ 0.626018] pci 0000:00:16.1: [8086:8c3b] type 00 class 0x078000 [ 0.626235] pci 0000:00:16.1: reg 0x10: [mem 0xfb616000-0xfb61600f 64bit] [ 0.626698] pci 0000:00:16.1: PME# supported from D0 D3hot D3cold [ 0.627054] pci 0000:00:1a.0: [8086:8c2d] type 00 class 0x0c0320 [ 0.627277] pci 0000:00:1a.0: reg 0x10: [mem 0xfb614000-0xfb6143ff] [ 0.627812] pci 0000:00:1a.0: PME# supported from D0 D3hot D3cold [ 0.628130] pci 0000:00:1c.0: [8086:8c10] type 01 class 0x060400 [ 0.628704] pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold [ 0.628904] pci 0000:00:1c.0: Enabling MPC IRBNCE [ 0.628976] pci 0000:00:1c.0: Intel PCH root port ACS workaround enabled [ 0.636155] pci 0000:00:1c.1: [8086:8c12] type 01 class 0x060400 [ 0.636710] pci 0000:00:1c.1: PME# supported from D0 D3hot D3cold [ 0.636906] pci 0000:00:1c.1: Enabling MPC IRBNCE [ 0.636975] pci 0000:00:1c.1: Intel PCH root port ACS workaround enabled [ 0.637267] pci 0000:00:1c.3: [8086:8c16] type 01 class 0x060400 [ 0.637853] pci 0000:00:1c.3: PME# supported from D0 D3hot D3cold [ 0.638043] pci 0000:00:1c.3: Enabling MPC IRBNCE [ 0.638165] pci 0000:00:1c.3: Intel PCH root port ACS workaround enabled [ 0.638450] pci 0000:00:1c.4: [8086:8c18] type 01 class 0x060400 [ 0.639032] pci 0000:00:1c.4: PME# supported from D0 D3hot D3cold [ 0.639227] pci 0000:00:1c.4: Enabling MPC IRBNCE [ 0.639349] pci 0000:00:1c.4: Intel PCH root port ACS workaround enabled [ 0.639672] pci 0000:00:1d.0: [8086:8c26] type 00 class 0x0c0320 [ 0.639868] pci 0000:00:1d.0: reg 0x10: [mem 0xfb613000-0xfb6133ff] [ 0.640410] pci 0000:00:1d.0: PME# supported from D0 D3hot D3cold [ 0.640731] pci 0000:00:1f.0: [8086:8c54] type 00 class 0x060100 [ 0.641495] pci 0000:00:1f.2: [8086:8c02] type 00 class 0x010601 [ 0.641706] pci 0000:00:1f.2: reg 0x10: [io 0xf070-0xf077] [ 0.641864] pci 0000:00:1f.2: reg 0x14: [io 0xf060-0xf063] [ 0.642008] pci 0000:00:1f.2: reg 0x18: [io 0xf050-0xf057] [ 0.642166] pci 0000:00:1f.2: reg 0x1c: [io 0xf040-0xf043] [ 0.642323] pci 0000:00:1f.2: reg 0x20: [io 0xf020-0xf03f] [ 0.642481] pci 0000:00:1f.2: reg 0x24: [mem 0xfb612000-0xfb6127ff] [ 0.642792] pci 0000:00:1f.2: PME# supported from D3hot [ 0.643105] pci 0000:00:1f.3: [8086:8c22] type 00 class 0x0c0500 [ 0.643322] pci 0000:00:1f.3: reg 0x10: [mem 0xfb611000-0xfb6110ff 64bit] [ 0.643567] pci 0000:00:1f.3: reg 0x20: [io 0xf000-0xf01f] [ 0.643944] pci 0000:00:1f.6: [8086:8c24] type 00 class 0x118000 [ 0.644066] pci 0000:00:1f.6: reg 0x10: [mem 0xfb610000-0xfb610fff 64bit] [ 0.644807] pci 0000:00:01.0: PCI bridge to [bus 01] [ 0.645103] pci 0000:00:01.1: PCI bridge to [bus 02] [ 0.645434] pci 0000:03:00.0: [8086:6f50] type 00 class 0x088000 [ 0.645674] pci 0000:03:00.0: reg 0x10: [mem 0xfb506000-0xfb507fff 64bit] [ 0.646429] pci 0000:03:00.1: [8086:6f51] type 00 class 0x088000 [ 0.646642] pci 0000:03:00.1: reg 0x10: [mem 0xfb504000-0xfb505fff 64bit] [ 0.647380] pci 0000:03:00.2: [8086:6f52] type 00 class 0x088000 [ 0.647593] pci 0000:03:00.2: reg 0x10: [mem 0xfb502000-0xfb503fff 64bit] [ 0.648334] pci 0000:03:00.3: [8086:6f53] type 00 class 0x088000 [ 0.648546] pci 0000:03:00.3: reg 0x10: [mem 0xfb500000-0xfb501fff 64bit] [ 0.649244] pci 0000:00:02.0: PCI bridge to [bus 03] [ 0.649378] pci 0000:00:02.0: bridge window [mem 0xfb500000-0xfb5fffff] [ 0.649744] pci 0000:04:00.0: [8086:15ac] type 00 class 0x020000 [ 0.649957] pci 0000:04:00.0: reg 0x10: [mem 0xfbc00000-0xfbdfffff 64bit pref] [ 0.650240] pci 0000:04:00.0: reg 0x20: [mem 0xfbe04000-0xfbe07fff 64bit pref] [ 0.650423] pci 0000:04:00.0: reg 0x30: [mem 0xfb480000-0xfb4fffff pref] [ 0.650773] pci 0000:04:00.0: PME# supported from D0 D3hot D3cold [ 0.651004] pci 0000:04:00.0: reg 0x184: [mem 0x00000000-0x00003fff 64bit] [ 0.651153] pci 0000:04:00.0: VF(n) BAR0 space: [mem 0x00000000-0x000fffff 64bit] (contains BAR0 for 64 VFs) [ 0.651357] pci 0000:04:00.0: reg 0x190: [mem 0x00000000-0x00003fff 64bit] [ 0.651477] pci 0000:04:00.0: VF(n) BAR3 space: [mem 0x00000000-0x000fffff 64bit] (contains BAR3 for 64 VFs) [ 0.652055] pci 0000:04:00.1: [8086:15ac] type 00 class 0x020000 [ 0.652268] pci 0000:04:00.1: reg 0x10: [mem 0xfba00000-0xfbbfffff 64bit pref] [ 0.652585] pci 0000:04:00.1: reg 0x20: [mem 0xfbe00000-0xfbe03fff 64bit pref] [ 0.652769] pci 0000:04:00.1: reg 0x30: [mem 0xfb400000-0xfb47ffff pref] [ 0.653117] pci 0000:04:00.1: PME# supported from D0 D3hot D3cold [ 0.653320] pci 0000:04:00.1: reg 0x184: [mem 0x00000000-0x00003fff 64bit] [ 0.653441] pci 0000:04:00.1: VF(n) BAR0 space: [mem 0x00000000-0x000fffff 64bit] (contains BAR0 for 64 VFs) [ 0.653643] pci 0000:04:00.1: reg 0x190: [mem 0x00000000-0x00003fff 64bit] [ 0.653788] pci 0000:04:00.1: VF(n) BAR3 space: [mem 0x00000000-0x000fffff 64bit] (contains BAR3 for 64 VFs) [ 0.654352] pci 0000:00:02.2: PCI bridge to [bus 04] [ 0.654487] pci 0000:00:02.2: bridge window [mem 0xfb400000-0xfb4fffff] [ 0.654630] pci 0000:00:02.2: bridge window [mem 0xfba00000-0xfbefffff 64bit pref] [ 0.654919] pci 0000:00:03.0: PCI bridge to [bus 05] [ 0.655173] pci 0000:00:03.2: PCI bridge to [bus 06] [ 0.655535] pci 0000:07:00.0: working around ROM BAR overlap defect [ 0.655655] pci 0000:07:00.0: [8086:1533] type 00 class 0x020000 [ 0.655861] pci 0000:07:00.0: reg 0x10: [mem 0xfb300000-0xfb37ffff] [ 0.656064] pci 0000:07:00.0: reg 0x18: [io 0xe000-0xe01f] [ 0.656229] pci 0000:07:00.0: reg 0x1c: [mem 0xfb380000-0xfb383fff] [ 0.656788] pci 0000:07:00.0: PME# supported from D0 D3hot D3cold [ 0.657254] pci 0000:00:1c.0: PCI bridge to [bus 07] [ 0.657380] pci 0000:00:1c.0: bridge window [io 0xe000-0xefff] [ 0.657508] pci 0000:00:1c.0: bridge window [mem 0xfb300000-0xfb3fffff] [ 0.657889] pci 0000:08:00.0: working around ROM BAR overlap defect [ 0.657967] pci 0000:08:00.0: [8086:1533] type 00 class 0x020000 [ 0.658174] pci 0000:08:00.0: reg 0x10: [mem 0xfb200000-0xfb27ffff] [ 0.658390] pci 0000:08:00.0: reg 0x18: [io 0xd000-0xd01f] [ 0.658555] pci 0000:08:00.0: reg 0x1c: [mem 0xfb280000-0xfb283fff] [ 0.659084] pci 0000:08:00.0: PME# supported from D0 D3hot D3cold [ 0.659569] pci 0000:00:1c.1: PCI bridge to [bus 08] [ 0.659694] pci 0000:00:1c.1: bridge window [io 0xd000-0xdfff] [ 0.659822] pci 0000:00:1c.1: bridge window [mem 0xfb200000-0xfb2fffff] [ 0.660159] pci 0000:09:00.0: [1a03:1150] type 01 class 0x060400 [ 0.660578] pci 0000:09:00.0: enabling Extended Tags [ 0.660917] pci 0000:09:00.0: supports D1 D2 [ 0.660967] pci 0000:09:00.0: PME# supported from D0 D1 D2 D3hot D3cold [ 0.661322] pci 0000:00:1c.3: PCI bridge to [bus 09-0a] [ 0.661448] pci 0000:00:1c.3: bridge window [io 0xc000-0xcfff] [ 0.661576] pci 0000:00:1c.3: bridge window [mem 0xfa000000-0xfb0fffff] [ 0.661908] pci_bus 0000:0a: extended config space not accessible [ 0.662020] pci 0000:0a:00.0: [1a03:2000] type 00 class 0x030000 [ 0.662226] pci 0000:0a:00.0: reg 0x10: [mem 0xfa000000-0xfaffffff] [ 0.662392] pci 0000:0a:00.0: reg 0x14: [mem 0xfb000000-0xfb01ffff] [ 0.662559] pci 0000:0a:00.0: reg 0x18: [io 0xc000-0xc07f] [ 0.662913] pci 0000:0a:00.0: Video device with shadowed ROM at [mem 0x000c0000-0x000dffff] [ 0.663136] pci 0000:0a:00.0: supports D1 D2 [ 0.663249] pci 0000:0a:00.0: PME# supported from D0 D1 D2 D3hot D3cold [ 0.663690] pci 0000:09:00.0: PCI bridge to [bus 0a] [ 0.663828] pci 0000:09:00.0: bridge window [io 0xc000-0xcfff] [ 0.663957] pci 0000:09:00.0: bridge window [mem 0xfa000000-0xfb0fffff] [ 0.664379] pci 0000:0b:00.0: [8086:1521] type 00 class 0x020000 [ 0.664604] pci 0000:0b:00.0: reg 0x10: [mem 0xfb160000-0xfb17ffff] [ 0.664814] pci 0000:0b:00.0: reg 0x18: [io 0xb060-0xb07f] [ 0.664974] pci 0000:0b:00.0: reg 0x1c: [mem 0xfb18c000-0xfb18ffff] [ 0.665490] pci 0000:0b:00.0: PME# supported from D0 D3hot D3cold [ 0.665724] pci 0000:0b:00.0: reg 0x184: [mem 0x00000000-0x00003fff 64bit pref] [ 0.665895] pci 0000:0b:00.0: VF(n) BAR0 space: [mem 0x00000000-0x0001ffff 64bit pref] (contains BAR0 for 8 VFs) [ 0.666030] pci 0000:0b:00.0: reg 0x190: [mem 0x00000000-0x00003fff 64bit pref] [ 0.666174] pci 0000:0b:00.0: VF(n) BAR3 space: [mem 0x00000000-0x0001ffff 64bit pref] (contains BAR3 for 8 VFs) [ 0.666734] pci 0000:0b:00.1: [8086:1521] type 00 class 0x020000 [ 0.666935] pci 0000:0b:00.1: reg 0x10: [mem 0xfb140000-0xfb15ffff] [ 0.667083] pci 0000:0b:00.1: reg 0x18: [io 0xb040-0xb05f] [ 0.667245] pci 0000:0b:00.1: reg 0x1c: [mem 0xfb188000-0xfb18bfff] [ 0.667755] pci 0000:0b:00.1: PME# supported from D0 D3hot D3cold [ 0.667986] pci 0000:0b:00.1: reg 0x184: [mem 0x00000000-0x00003fff 64bit pref] [ 0.668130] pci 0000:0b:00.1: VF(n) BAR0 space: [mem 0x00000000-0x0001ffff 64bit pref] (contains BAR0 for 8 VFs) [ 0.668346] pci 0000:0b:00.1: reg 0x190: [mem 0x00000000-0x00003fff 64bit pref] [ 0.668523] pci 0000:0b:00.1: VF(n) BAR3 space: [mem 0x00000000-0x0001ffff 64bit pref] (contains BAR3 for 8 VFs) [ 0.669045] pci 0000:0b:00.2: [8086:1521] type 00 class 0x020000 [ 0.669246] pci 0000:0b:00.2: reg 0x10: [mem 0xfb120000-0xfb13ffff] [ 0.669455] pci 0000:0b:00.2: reg 0x18: [io 0xb020-0xb03f] [ 0.669616] pci 0000:0b:00.2: reg 0x1c: [mem 0xfb184000-0xfb187fff] [ 0.670160] pci 0000:0b:00.2: PME# supported from D0 D3hot D3cold [ 0.670389] pci 0000:0b:00.2: reg 0x184: [mem 0x00000000-0x00003fff 64bit pref] [ 0.670533] pci 0000:0b:00.2: VF(n) BAR0 space: [mem 0x00000000-0x0001ffff 64bit pref] (contains BAR0 for 8 VFs) [ 0.670750] pci 0000:0b:00.2: reg 0x190: [mem 0x00000000-0x00003fff 64bit pref] [ 0.670893] pci 0000:0b:00.2: VF(n) BAR3 space: [mem 0x00000000-0x0001ffff 64bit pref] (contains BAR3 for 8 VFs) [ 0.671364] pci 0000:0b:00.3: [8086:1521] type 00 class 0x020000 [ 0.671565] pci 0000:0b:00.3: reg 0x10: [mem 0xfb100000-0xfb11ffff] [ 0.671774] pci 0000:0b:00.3: reg 0x18: [io 0xb000-0xb01f] [ 0.671935] pci 0000:0b:00.3: reg 0x1c: [mem 0xfb180000-0xfb183fff] [ 0.672382] pci 0000:0b:00.3: PME# supported from D0 D3hot D3cold [ 0.672613] pci 0000:0b:00.3: reg 0x184: [mem 0x00000000-0x00003fff 64bit pref] [ 0.672757] pci 0000:0b:00.3: VF(n) BAR0 space: [mem 0x00000000-0x0001ffff 64bit pref] (contains BAR0 for 8 VFs) [ 0.672976] pci 0000:0b:00.3: reg 0x190: [mem 0x00000000-0x00003fff 64bit pref] [ 0.673120] pci 0000:0b:00.3: VF(n) BAR3 space: [mem 0x00000000-0x0001ffff 64bit pref] (contains BAR3 for 8 VFs) [ 0.673700] pci 0000:00:1c.4: PCI bridge to [bus 0b] [ 0.673862] pci 0000:00:1c.4: bridge window [io 0xb000-0xbfff] [ 0.673977] pci 0000:00:1c.4: bridge window [mem 0xfb100000-0xfb1fffff] [ 0.674116] pci 0000:00:1c.4: bridge has subordinate 0b but max busn 0c [ 0.674585] pci_bus 0000:00: on NUMA node 0 [ 0.674681] xen: registering gsi 13 triggering 1 polarity 0 [ 0.675660] ACPI: PCI: Interrupt link LNKA configured for IRQ 11 [ 0.675855] ACPI: PCI: Interrupt link LNKB configured for IRQ 10 [ 0.676040] ACPI: PCI: Interrupt link LNKC configured for IRQ 5 [ 0.676230] ACPI: PCI: Interrupt link LNKD configured for IRQ 11 [ 0.676420] ACPI: PCI: Interrupt link LNKE configured for IRQ 0 [ 0.676569] ACPI: PCI: Interrupt link LNKE disabled [ 0.676753] ACPI: PCI: Interrupt link LNKF configured for IRQ 0 [ 0.676871] ACPI: PCI: Interrupt link LNKF disabled [ 0.677039] ACPI: PCI: Interrupt link LNKG configured for IRQ 0 [ 0.677157] ACPI: PCI: Interrupt link LNKG disabled [ 0.677341] ACPI: PCI: Interrupt link LNKH configured for IRQ 0 [ 0.677459] ACPI: PCI: Interrupt link LNKH disabled [ 0.677716] xen:balloon: Initialising balloon driver [ 0.678058] iommu: Default domain type: Translated [ 0.684968] iommu: DMA domain TLB invalidation policy: lazy mode [ 0.685153] SCSI subsystem initialized [ 0.685998] libata version 3.00 loaded. [ 0.686028] ACPI: bus type USB registered [ 0.686161] usbcore: registered new interface driver usbfs [ 0.686284] usbcore: registered new interface driver hub [ 0.686411] usbcore: registered new device driver usb [ 0.686411] pps_core: LinuxPPS API ver. 1 registered [ 0.686411] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti [ 0.686411] PTP clock support registered [ 0.687012] Advanced Linux Sound Architecture Driver Initialized. [ 0.687270] NetLabel: Initializing [ 0.687382] NetLabel: domain hash size = 128 [ 0.687382] NetLabel: protocols = UNLABELED CIPSOv4 CALIPSO [ 0.687382] NetLabel: unlabeled traffic allowed by default [ 0.687382] PCI: Using ACPI for IRQ routing [ 0.722588] PCI: pci_cache_line_size set to 64 bytes [ 0.723366] e820: reserve RAM buffer [mem 0x0009a000-0x0009ffff] [ 0.723369] e820: reserve RAM buffer [mem 0x20066000-0x23ffffff] [ 0.723390] pci 0000:0a:00.0: vgaarb: setting as boot VGA device [ 0.723390] pci 0000:0a:00.0: vgaarb: bridge control possible [ 0.723390] pci 0000:0a:00.0: vgaarb: VGA device added: decodes=io+mem,owns=io+mem,locks=none [ 0.723394] vgaarb: loaded [ 0.725627] clocksource: Switched to clocksource tsc-early [ 0.725848] VFS: Disk quotas dquot_6.6.0 [ 0.725848] VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes) [ 0.725848] hugetlbfs: disabling because there are no supported hugepage sizes [ 0.725848] pnp: PnP ACPI init [ 0.726109] xen: registering gsi 8 triggering 1 polarity 0 [ 0.726304] system 00:01: [io 0x0500-0x057f] has been reserved [ 0.726321] system 00:01: [io 0x0400-0x047f] has been reserved [ 0.726321] system 00:01: [io 0x0580-0x059f] has been reserved [ 0.726321] system 00:01: [io 0x0600-0x061f] has been reserved [ 0.726321] system 00:01: [io 0x0880-0x0883] has been reserved [ 0.726321] system 00:01: [io 0x0800-0x081f] has been reserved [ 0.727041] system 00:01: [mem 0xfed1c000-0xfed3ffff] could not be reserved [ 0.727167] system 00:01: [mem 0xfed45000-0xfed8bfff] has been reserved [ 0.727286] system 00:01: [mem 0xff000000-0xffffffff] has been reserved [ 0.727406] system 00:01: [mem 0xfee00000-0xfeefffff] has been reserved [ 0.727526] system 00:01: [mem 0xfed12000-0xfed1200f] has been reserved [ 0.727654] system 00:01: [mem 0xfed12010-0xfed1201f] has been reserved [ 0.727773] system 00:01: [mem 0xfed1b000-0xfed1bfff] has been reserved [ 0.728209] system 00:02: [io 0x0a00-0x0a0f] has been reserved [ 0.728333] system 00:02: [io 0x0a10-0x0a1f] has been reserved [ 0.728451] system 00:02: [io 0x0a20-0x0a2f] has been reserved [ 0.728569] system 00:02: [io 0x0a30-0x0a3f] has been reserved [ 0.728686] system 00:02: [io 0x0a40-0x0a4f] has been reserved [ 0.729132] xen: registering gsi 4 triggering 1 polarity 0 [ 0.729138] Already setup the GSI :4 [ 0.729251] pnp 00:03: [dma 0 disabled] [ 0.729568] xen: registering gsi 3 triggering 1 polarity 0 [ 0.729579] pnp 00:04: [dma 0 disabled] [ 0.730195] pnp: PnP ACPI: found 5 devices [ 0.762305] PM-Timer failed consistency check (0xffffff) - aborting. [ 0.762498] NET: Registered PF_INET protocol family [ 0.762658] IP idents hash table entries: 8192 (order: 4, 65536 bytes, linear) [ 0.763055] tcp_listen_portaddr_hash hash table entries: 256 (order: 0, 4096 bytes, linear) [ 0.763210] Table-perturb hash table entries: 65536 (order: 6, 262144 bytes, linear) [ 0.763356] TCP established hash table entries: 4096 (order: 3, 32768 bytes, linear) [ 0.763505] TCP bind hash table entries: 4096 (order: 5, 131072 bytes, linear) [ 0.763708] TCP: Hash tables configured (established 4096 bind 4096) [ 0.763851] UDP hash table entries: 256 (order: 1, 8192 bytes, linear) [ 0.764014] UDP-Lite hash table entries: 256 (order: 1, 8192 bytes, linear) [ 0.764210] NET: Registered PF_UNIX/PF_LOCAL protocol family [ 0.764614] RPC: Registered named UNIX socket transport module. [ 0.764739] RPC: Registered udp transport module. [ 0.764852] RPC: Registered tcp transport module. [ 0.764979] RPC: Registered tcp NFSv4.1 backchannel transport module. [ 0.765529] pci 0000:00:1c.4: bridge window [mem 0x00100000-0x000fffff 64bit pref] to [bus 0b] add_size 100000 add_align 100000 [ 0.765699] clipped [mem size 0x00000000 64bit pref] to [mem size 0xfffffffffffa0000 64bit pref] for e820 entry [mem 0x0009ac00-0x000fffff] [ 0.765862] clipped [mem size 0x00020000 64bit pref] to [mem size 0xfffffffffffc0000 64bit pref] for e820 entry [mem 0x0009ac00-0x000fffff] [ 0.766045] pci 0000:00:1c.4: BAR 15: assigned [mem 0x90000000-0x900fffff 64bit pref] [ 0.766195] pci 0000:00:01.0: PCI bridge to [bus 01] [ 0.766370] pci 0000:00:01.1: PCI bridge to [bus 02] [ 0.766548] pci 0000:00:02.0: PCI bridge to [bus 03] [ 0.766681] pci 0000:00:02.0: bridge window [mem 0xfb500000-0xfb5fffff] [ 0.766843] pci 0000:04:00.0: BAR 7: no space for [mem size 0x00100000 64bit] [ 0.766977] pci 0000:04:00.0: BAR 7: failed to assign [mem size 0x00100000 64bit] [ 0.767133] pci 0000:04:00.0: BAR 10: no space for [mem size 0x00100000 64bit] [ 0.767278] pci 0000:04:00.0: BAR 10: failed to assign [mem size 0x00100000 64bit] [ 0.767422] pci 0000:04:00.1: BAR 7: no space for [mem size 0x00100000 64bit] [ 0.767544] pci 0000:04:00.1: BAR 7: failed to assign [mem size 0x00100000 64bit] [ 0.767688] pci 0000:04:00.1: BAR 10: no space for [mem size 0x00100000 64bit] [ 0.767838] pci 0000:04:00.1: BAR 10: failed to assign [mem size 0x00100000 64bit] [ 0.767997] pci 0000:04:00.0: BAR 7: no space for [mem size 0x00100000 64bit] [ 0.768122] pci 0000:04:00.0: BAR 7: failed to assign [mem size 0x00100000 64bit] [ 0.768266] pci 0000:04:00.0: BAR 10: no space for [mem size 0x00100000 64bit] [ 0.768409] pci 0000:04:00.0: BAR 10: failed to assign [mem size 0x00100000 64bit] [ 0.768552] pci 0000:04:00.1: BAR 7: no space for [mem size 0x00100000 64bit] [ 0.768674] pci 0000:04:00.1: BAR 7: failed to assign [mem size 0x00100000 64bit] [ 0.768818] pci 0000:04:00.1: BAR 10: no space for [mem size 0x00100000 64bit] [ 0.768960] pci 0000:04:00.1: BAR 10: failed to assign [mem size 0x00100000 64bit] [ 0.769119] pci 0000:00:02.2: PCI bridge to [bus 04] [ 0.769262] pci 0000:00:02.2: bridge window [mem 0xfb400000-0xfb4fffff] [ 0.769395] pci 0000:00:02.2: bridge window [mem 0xfba00000-0xfbefffff 64bit pref] [ 0.769565] pci 0000:00:03.0: PCI bridge to [bus 05] [ 0.769738] pci 0000:00:03.2: PCI bridge to [bus 06] [ 0.769911] pci 0000:00:1c.0: PCI bridge to [bus 07] [ 0.770055] pci 0000:00:1c.0: bridge window [io 0xe000-0xefff] [ 0.770205] pci 0000:00:1c.0: bridge window [mem 0xfb300000-0xfb3fffff] [ 0.770367] pci 0000:00:1c.1: PCI bridge to [bus 08] [ 0.770486] pci 0000:00:1c.1: bridge window [io 0xd000-0xdfff] [ 0.770633] pci 0000:00:1c.1: bridge window [mem 0xfb200000-0xfb2fffff] [ 0.770794] pci 0000:09:00.0: PCI bridge to [bus 0a] [ 0.770914] pci 0000:09:00.0: bridge window [io 0xc000-0xcfff] [ 0.771080] pci 0000:09:00.0: bridge window [mem 0xfa000000-0xfb0fffff] [ 0.771247] pci 0000:00:1c.3: PCI bridge to [bus 09-0a] [ 0.771367] pci 0000:00:1c.3: bridge window [io 0xc000-0xcfff] [ 0.771506] pci 0000:00:1c.3: bridge window [mem 0xfa000000-0xfb0fffff] [ 0.771670] pci 0000:0b:00.0: BAR 7: assigned [mem 0x90000000-0x9001ffff 64bit pref] [ 0.771827] pci 0000:0b:00.0: BAR 10: assigned [mem 0x90020000-0x9003ffff 64bit pref] [ 0.772000] pci 0000:0b:00.1: BAR 7: assigned [mem 0x90040000-0x9005ffff 64bit pref] [ 0.772169] pci 0000:0b:00.1: BAR 10: assigned [mem 0x90060000-0x9007ffff 64bit pref] [ 0.772323] pci 0000:0b:00.2: BAR 7: assigned [mem 0x90080000-0x9009ffff 64bit pref] [ 0.772474] pci 0000:0b:00.2: BAR 10: assigned [mem 0x900a0000-0x900bffff 64bit pref] [ 0.772626] pci 0000:0b:00.3: BAR 7: assigned [mem 0x900c0000-0x900dffff 64bit pref] [ 0.772778] pci 0000:0b:00.3: BAR 10: assigned [mem 0x900e0000-0x900fffff 64bit pref] [ 0.772931] pci 0000:00:1c.4: PCI bridge to [bus 0b] [ 0.773077] pci 0000:00:1c.4: bridge window [io 0xb000-0xbfff] [ 0.773218] pci 0000:00:1c.4: bridge window [mem 0xfb100000-0xfb1fffff] [ 0.773353] pci 0000:00:1c.4: bridge window [mem 0x90000000-0x900fffff 64bit pref] [ 0.773543] pci_bus 0000:00: Some PCI device resources are unassigned, try booting with pci=realloc [ 0.773692] pci_bus 0000:00: resource 4 [io 0x0000-0x0cf7 window] [ 0.773811] pci_bus 0000:00: resource 5 [io 0x1000-0xffff window] [ 0.773929] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff window] [ 0.774075] pci_bus 0000:00: resource 7 [mem 0x90000000-0xfbffbfff window] [ 0.774198] pci_bus 0000:03: resource 1 [mem 0xfb500000-0xfb5fffff] [ 0.774317] pci_bus 0000:04: resource 1 [mem 0xfb400000-0xfb4fffff] [ 0.774436] pci_bus 0000:04: resource 2 [mem 0xfba00000-0xfbefffff 64bit pref] [ 0.774579] pci_bus 0000:07: resource 0 [io 0xe000-0xefff] [ 0.774695] pci_bus 0000:07: resource 1 [mem 0xfb300000-0xfb3fffff] [ 0.774819] pci_bus 0000:08: resource 0 [io 0xd000-0xdfff] [ 0.774935] pci_bus 0000:08: resource 1 [mem 0xfb200000-0xfb2fffff] [ 0.775066] pci_bus 0000:09: resource 0 [io 0xc000-0xcfff] [ 0.775187] pci_bus 0000:09: resource 1 [mem 0xfa000000-0xfb0fffff] [ 0.775306] pci_bus 0000:0a: resource 0 [io 0xc000-0xcfff] [ 0.775421] pci_bus 0000:0a: resource 1 [mem 0xfa000000-0xfb0fffff] [ 0.775540] pci_bus 0000:0b: resource 0 [io 0xb000-0xbfff] [ 0.775655] pci_bus 0000:0b: resource 1 [mem 0xfb100000-0xfb1fffff] [ 0.775773] pci_bus 0000:0b: resource 2 [mem 0x90000000-0x900fffff 64bit pref] [ 0.776347] pci 0000:00:05.0: disabled boot interrupts on device [8086:6f28] [ 0.776570] xen: registering gsi 19 triggering 0 polarity 1 [ 0.776597] xen: --> pirq=19 -> irq=19 (gsi=19) [ 0.785387] xen: registering gsi 18 triggering 0 polarity 1 [ 0.785406] xen: --> pirq=18 -> irq=18 (gsi=18) [ 0.801465] pci 0000:00:1a.0: quirk_usb_early_handoff+0x0/0x720 took 15750 usecs [ 0.801746] xen: registering gsi 18 triggering 0 polarity 1 [ 0.801751] Already setup the GSI :18 [ 0.818388] pci 0000:00:1d.0: quirk_usb_early_handoff+0x0/0x720 took 16306 usecs [ 0.818603] pci 0000:04:00.0: CLS mismatch (64 != 32), using 64 bytes [ 0.818752] PCI-DMA: Using software bounce buffering for IO (SWIOTLB) [ 0.818826] Unpacking initramfs... [ 0.818871] software IO TLB: mapped [mem 0x000000001b180000-0x000000001f180000] (64MB) [ 0.819220] kvm: no hardware support for 'kvm_intel' [ 0.827051] has_svm: not amd or hygon [ 0.827171] kvm: no hardware support for 'kvm_amd' [ 0.827288] clocksource: tsc: mask: 0xffffffffffffffff max_cycles: 0x1fb63109b96, max_idle_ns: 440795265316 ns [ 0.827529] clocksource: Switched to clocksource tsc [ 0.830281] Initialise system trusted keyrings [ 0.830605] workingset: timestamp_bits=62 max_order=17 bucket_order=0 [ 0.832114] NFS: Registering the id_resolver key type [ 0.832240] Key type id_resolver registered [ 0.832351] Key type id_legacy registered [ 0.832554] 9p: Installing v9fs 9p2000 file system support [ 0.846503] Key type asymmetric registered [ 0.846629] Asymmetric key parser 'x509' registered [ 0.846765] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 251) [ 0.846920] io scheduler mq-deadline registered [ 0.847033] io scheduler kyber registered [ 0.847926] xen: registering gsi 16 triggering 0 polarity 1 [ 0.847956] xen: --> pirq=16 -> irq=16 (gsi=16) [ 0.848560] xen: registering gsi 16 triggering 0 polarity 1 [ 0.848567] Already setup the GSI :16 [ 0.849155] xen: registering gsi 16 triggering 0 polarity 1 [ 0.849160] Already setup the GSI :16 [ 0.849501] xen: registering gsi 16 triggering 0 polarity 1 [ 0.849505] Already setup the GSI :16 [ 0.849832] xen: registering gsi 16 triggering 0 polarity 1 [ 0.849836] Already setup the GSI :16 [ 0.850413] xen: registering gsi 16 triggering 0 polarity 1 [ 0.850418] Already setup the GSI :16 [ 0.851001] xen: registering gsi 16 triggering 0 polarity 1 [ 0.851006] Already setup the GSI :16 [ 0.851443] xen: registering gsi 17 triggering 0 polarity 1 [ 0.851472] xen: --> pirq=17 -> irq=17 (gsi=17) [ 0.851809] xen: registering gsi 19 triggering 0 polarity 1 [ 0.851813] Already setup the GSI :19 [ 0.852261] xen: registering gsi 16 triggering 0 polarity 1 [ 0.852266] Already setup the GSI :16 [ 0.852936] input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input0 [ 0.853109] ACPI: button: Power Button [PWRB] [ 0.853251] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input1 [ 0.853533] ACPI: button: Power Button [PWRF] [ 0.853842] Monitor-Mwait will be used to enter C-1 state [ 0.853880] Monitor-Mwait will be used to enter C-2 state [ 0.853896] ACPI: \_SB_.SCK0.CP00: Found 2 idle states [ 0.854328] ACPI: \_SB_.SCK0.CP01: Found 2 idle states [ 0.854728] ACPI: \_SB_.SCK0.CP02: Found 2 idle states [ 0.855251] ACPI: \_SB_.SCK0.CP03: Found 2 idle states [ 0.855604] ACPI: \_SB_.SCK0.CP04: Found 2 idle states [ 0.856070] ACPI: \_SB_.SCK0.CP05: Found 2 idle states [ 0.856577] ACPI: \_SB_.SCK0.CP06: Found 2 idle states [ 0.856949] ACPI: \_SB_.SCK0.CP07: Found 2 idle states [ 0.857719] xen:xen_evtchn: Event-channel device installed [ 0.857917] xen_pciback: backend is vpci [ 0.858684] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled [ 0.858999] 00:04: ttyS1 at I/O 0x2f8 (irq = 3, base_baud = 115200) is a 16550A [ 0.859762] hpet_acpi_add: no address or irqs in _CRS [ 0.859998] Non-volatile memory driver v1.3 [ 0.860111] AMD-Vi: AMD IOMMUv2 functionality not available on this system - This is not a bug. [ 0.862917] loop: module loaded [ 0.869743] ahci 0000:00:1f.2: version 3.0 [ 0.869845] xen: registering gsi 16 triggering 0 polarity 1 [ 0.869854] Already setup the GSI :16 [ 0.870195] ahci 0000:00:1f.2: AHCI 0001.0300 32 slots 6 ports 6 Gbps 0x3f impl SATA mode [ 0.870345] ahci 0000:00:1f.2: flags: 64bit ncq led clo pio ems apst [ 0.886103] scsi host0: ahci [ 0.886523] scsi host1: ahci [ 0.886914] scsi host2: ahci [ 0.887242] scsi host3: ahci [ 0.887613] scsi host4: ahci [ 0.887994] scsi host5: ahci [ 0.888177] ata1: SATA max UDMA/133 abar m2048@0xfb612000 port 0xfb612100 irq 75 [ 0.888323] ata2: SATA max UDMA/133 abar m2048@0xfb612000 port 0xfb612180 irq 75 [ 0.888485] ata3: SATA max UDMA/133 abar m2048@0xfb612000 port 0xfb612200 irq 75 [ 0.888629] ata4: SATA max UDMA/133 abar m2048@0xfb612000 port 0xfb612280 irq 75 [ 0.888772] ata5: SATA max UDMA/133 abar m2048@0xfb612000 port 0xfb612300 irq 75 [ 0.888916] ata6: SATA max UDMA/133 abar m2048@0xfb612000 port 0xfb612380 irq 75 [ 0.889344] tun: Universal TUN/TAP device driver, 1.6 [ 0.889652] e100: Intel(R) PRO/100 Network Driver [ 0.889771] e100: Copyright(c) 1999-2006 Intel Corporation [ 0.889907] sky2: driver version 1.30 [ 0.890091] xen_netfront: Initialising Xen virtual ethernet driver [ 0.890444] xen: registering gsi 18 triggering 0 polarity 1 [ 0.890466] Already setup the GSI :18 [ 0.890679] ehci-pci 0000:00:1a.0: EHCI Host Controller [ 0.890946] ehci-pci 0000:00:1a.0: new USB bus registered, assigned bus number 1 [ 0.891122] ehci-pci 0000:00:1a.0: debug port 2 [ 0.895251] ehci-pci 0000:00:1a.0: irq 18, io mem 0xfb614000 [ 0.901507] ehci-pci 0000:00:1a.0: USB 2.0 started, EHCI 1.00 [ 0.901730] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 6.01 [ 0.901908] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 0.902053] usb usb1: Product: EHCI Host Controller [ 0.902167] usb usb1: Manufacturer: Linux 6.1.93+ ehci_hcd [ 0.902283] usb usb1: SerialNumber: 0000:00:1a.0 [ 0.902594] hub 1-0:1.0: USB hub found [ 0.902719] hub 1-0:1.0: 2 ports detected [ 0.903080] xen: registering gsi 18 triggering 0 polarity 1 [ 0.903089] Already setup the GSI :18 [ 0.903304] ehci-pci 0000:00:1d.0: EHCI Host Controller [ 0.903545] ehci-pci 0000:00:1d.0: new USB bus registered, assigned bus number 2 [ 0.903724] ehci-pci 0000:00:1d.0: debug port 2 [ 0.907808] ehci-pci 0000:00:1d.0: irq 18, io mem 0xfb613000 [ 0.914490] ehci-pci 0000:00:1d.0: USB 2.0 started, EHCI 1.00 [ 0.914714] usb usb2: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 6.01 [ 0.914861] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 0.915004] usb usb2: Product: EHCI Host Controller [ 0.915118] usb usb2: Manufacturer: Linux 6.1.93+ ehci_hcd [ 0.915233] usb usb2: SerialNumber: 0000:00:1d.0 [ 0.915521] hub 2-0:1.0: USB hub found [ 0.915648] hub 2-0:1.0: 2 ports detected [ 0.916120] xen: registering gsi 19 triggering 0 polarity 1 [ 0.916130] Already setup the GSI :19 [ 0.916334] xhci_hcd 0000:00:14.0: xHCI Host Controller [ 0.916548] xhci_hcd 0000:00:14.0: new USB bus registered, assigned bus number 3 [ 0.917765] xhci_hcd 0000:00:14.0: hcc params 0x200077c1 hci version 0x100 quirks 0x0000000000009810 [ 0.918227] xhci_hcd 0000:00:14.0: xHCI Host Controller [ 0.918427] xhci_hcd 0000:00:14.0: new USB bus registered, assigned bus number 4 [ 0.918624] xhci_hcd 0000:00:14.0: Host supports USB 3.0 SuperSpeed [ 0.918828] usb usb3: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 6.01 [ 0.918975] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 0.919118] usb usb3: Product: xHCI Host Controller [ 0.919232] usb usb3: Manufacturer: Linux 6.1.93+ xhci-hcd [ 0.919347] usb usb3: SerialNumber: 0000:00:14.0 [ 0.919636] hub 3-0:1.0: USB hub found [ 0.919768] hub 3-0:1.0: 8 ports detected [ 0.920942] usb usb4: New USB device found, idVendor=1d6b, idProduct=0003, bcdDevice= 6.01 [ 0.921093] usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 0.921237] usb usb4: Product: xHCI Host Controller [ 0.921390] usb usb4: Manufacturer: Linux 6.1.93+ xhci-hcd [ 0.921515] usb usb4: SerialNumber: 0000:00:14.0 [ 0.921774] hub 4-0:1.0: USB hub found [ 0.921905] hub 4-0:1.0: 6 ports detected [ 0.923180] usbcore: registered new interface driver usblp [ 0.923326] usbcore: registered new interface driver usb-storage [ 0.923549] i8042: PNP: No PS/2 controller found. [ 0.923865] rtc_cmos 00:00: RTC can wake from S4 [ 0.924269] Freeing initrd memory: 19884K [ 0.924596] rtc_cmos 00:00: registered as rtc0 [ 0.924752] rtc_cmos 00:00: alarms up to one month, y3k, 114 bytes nvram [ 0.924957] device-mapper: uevent: version 1.0.3 [ 0.925071] xen: registering gsi 18 triggering 0 polarity 1 [ 0.925082] Already setup the GSI :18 [ 0.925170] device-mapper: ioctl: 4.47.0-ioctl (2022-07-28) initialised: dm-devel@redhat.com [ 0.925232] i801_smbus 0000:00:1f.3: SPD Write Disable is set [ 0.925347] intel_pstate: CPU model not supported [ 0.925378] i801_smbus 0000:00:1f.3: SMBus using PCI interrupt [ 0.925532] hid: raw HID events driver (C) Jiri Kosina [ 0.925988] usbcore: registered new interface driver usbhid [ 0.926087] i2c i2c-0: 1/4 memory slots populated (from DMI) [ 0.926105] usbhid: USB HID core driver [ 0.926542] Initializing XFRM netlink socket [ 0.926780] NET: Registered PF_INET6 protocol family [ 0.927382] Segment Routing with IPv6 [ 0.927515] In-situ OAM (IOAM) with IPv6 [ 0.927659] sit: IPv6, IPv4 and MPLS over IPv4 tunneling driver [ 0.927893] NET: Registered PF_PACKET protocol family [ 0.928045] 9pnet: Installing 9P2000 support [ 0.928171] Key type dns_resolver registered [ 0.928957] IPI shorthand broadcast: enabled [ 0.929095] sched_clock: Marking stable (891434626, 37449867)->(1776904862, -848020369) [ 0.929726] registered taskstats version 1 [ 0.929842] Loading compiled-in X.509 certificates [ 0.932445] PM: Magic number: 12:609:209 [ 0.932637] pci 0000:ff:14.2: hash matches [ 0.932767] acpi device:60: hash matches [ 0.932924] printk: console [netcon0] enabled [ 0.933038] netconsole: network logging started [ 0.933373] cfg80211: Loading compiled-in X.509 certificates for regulatory database [ 0.946058] cfg80211: Loaded X.509 cert 'sforshee: 00b28ddf47aef9cea7' [ 0.946396] cfg80211: Loaded X.509 cert 'wens: 61c038651aabdcf94bd0ac7ff06c7248db18c600' [ 0.947069] cfg80211: loaded regulatory.db is malformed or signature is missing/invalid [ 0.947245] ALSA device list: [ 0.955138] No soundcards found. [ 1.143589] usb 1-1: new high-speed USB device number 2 using ehci-pci [ 1.151562] usb 2-1: new high-speed USB device number 2 using ehci-pci [ 1.159483] usb 3-3: new high-speed USB device number 2 using xhci_hcd [ 1.197047] ata3: SATA link up 6.0 Gbps (SStatus 133 SControl 300) [ 1.197190] ata2: SATA link down (SStatus 0 SControl 300) [ 1.197338] ata4: SATA link down (SStatus 0 SControl 300) [ 1.197512] ata1: SATA link down (SStatus 0 SControl 300) [ 1.197670] ata6: SATA link down (SStatus 0 SControl 300) [ 1.197824] ata5: SATA link down (SStatus 0 SControl 300) [ 1.198190] ata3.00: ATA-10: HGST HUS722T1TALA604, RAGNWA05, max UDMA/133 [ 1.272117] usb 1-1: New USB device found, idVendor=8087, idProduct=8008, bcdDevice= 0.05 [ 1.272401] usb 1-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0 [ 1.272841] hub 1-1:1.0: USB hub found [ 1.273096] hub 1-1:1.0: 4 ports detected [ 1.280116] usb 2-1: New USB device found, idVendor=8087, idProduct=8000, bcdDevice= 0.05 [ 1.280296] usb 2-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0 [ 1.280729] hub 2-1:1.0: USB hub found [ 1.280941] hub 2-1:1.0: 4 ports detected [ 1.283189] ata3.00: 1953525168 sectors, multi 16: LBA48 NCQ (depth 32), AA [ 1.283434] ata3.00: Features: NCQ-sndrcv NCQ-prio [ 1.287227] usb 3-3: New USB device found, idVendor=05e3, idProduct=0610, bcdDevice=32.98 [ 1.287523] usb 3-3: New USB device strings: Mfr=0, Product=1, SerialNumber=0 [ 1.287648] usb 3-3: Product: USB2.0 Hub [ 1.288641] hub 3-3:1.0: USB hub found [ 1.289103] hub 3-3:1.0: 4 ports detected [ 1.311021] ata3.00: configured for UDMA/133 [ 1.311496] scsi 2:0:0:0: Direct-Access ATA HGST HUS722T1TAL WA05 PQ: 0 ANSI: 5 [ 1.312083] sd 2:0:0:0: Attached scsi generic sg0 type 0 [ 1.312193] sd 2:0:0:0: [sda] 1953525168 512-byte logical blocks: (1.00 TB/932 GiB) [ 1.312418] sd 2:0:0:0: [sda] Write Protect is off [ 1.312566] sd 2:0:0:0: [sda] Mode Sense: 00 3a 00 00 [ 1.312638] sd 2:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 1.312876] sd 2:0:0:0: [sda] Preferred minimum I/O size 512 bytes [ 1.332159] sda: sda1 sda2 < sda5 > [ 1.332558] sd 2:0:0:0: [sda] Attached SCSI disk [ 1.333845] Freeing unused kernel image (initmem) memory: 1580K [ 1.333974] Write protecting the kernel read-only data: 22528k [ 1.352050] Freeing unused kernel image (text/rodata gap) memory: 2032K [ 1.353382] Freeing unused kernel image (rodata/data gap) memory: 1568K [ 1.405519] usb 3-4: new high-speed USB device number 3 using xhci_hcd [ 1.531798] usb 3-4: New USB device found, idVendor=0557, idProduct=7000, bcdDevice= 0.00 [ 1.531952] usb 3-4: New USB device strings: Mfr=0, Product=0, SerialNumber=0 [ 1.532642] hub 3-4:1.0: USB hub found [ 1.532883] hub 3-4:1.0: 4 ports detected [ 1.595494] usb 3-3.2: new high-speed USB device number 4 using xhci_hcd [ 1.673000] usb 3-3.2: New USB device found, idVendor=05e3, idProduct=0610, bcdDevice=32.98 [ 1.673155] usb 3-3.2: New USB device strings: Mfr=0, Product=1, SerialNumber=0 [ 1.673299] usb 3-3.2: Product: USB2.0 Hub [ 1.674032] hub 3-3.2:1.0: USB hub found [ 1.674508] hub 3-3.2:1.0: 4 ports detected [ 1.813851] x86/mm: Checked W+X mappings: passed, no W+X pages found. [ 1.813977] Run /init as init process [ 1.814087] with arguments: [ 1.814089] /init [ 1.814090] placeholder [ 1.814091] with environment: [ 1.814092] HOME=/ [ 1.814093] TERM=linux [ 1.825504] usb 3-4.1: new low-speed USB device number 5 using xhci_hcd [ 1.930866] usb 3-4.1: New USB device found, idVendor=0557, idProduct=2419, bcdDevice= 1.00 [ 1.931026] usb 3-4.1: New USB device strings: Mfr=0, Product=0, SerialNumber=0 [ 1.936908] input: HID 0557:2419 as /devices/pci0000:00/0000:00:14.0/usb3/3-4/3-4.1/3-4.1:1.0/0003:0557:2419.0001/input/input2 [ 1.989803] hid-generic 0003:0557:2419.0001: input,hidraw0: USB HID v1.00 Keyboard [HID 0557:2419] on usb-0000:00:14.0-4.1/input0 [ 1.992693] input: HID 0557:2419 as /devices/pci0000:00/0000:00:14.0/usb3/3-4/3-4.1/3-4.1:1.1/0003:0557:2419.0002/input/input3 [ 1.993008] hid-generic 0003:0557:2419.0002: input,hidraw1: USB HID v1.00 Mouse [HID 0557:2419] on usb-0000:00:14.0-4.1/input1 [ 2.254186] ixgbe: Intel(R) 10 Gigabit PCI Express Network Driver [ 2.254348] ixgbe: Copyright (c) 1999-2016 Intel Corporation. [ 2.254802] ACPI Warning: \_SB.PCI0.BR2C._PRT: Return Package has no elements (empty) (20220331/nsprepkg-94) [ 2.255116] xen: registering gsi 16 triggering 0 polarity 1 [ 2.255131] Already setup the GSI :16 [ 2.258946] igb: Intel(R) Gigabit Ethernet Network Driver [ 2.259072] igb: Copyright (c) 2007-2014 Intel Corporation. [ 2.259282] xen: registering gsi 16 triggering 0 polarity 1 [ 2.259292] Already setup the GSI :16 [ 2.286069] pps pps0: new PPS source ptp0 [ 2.286253] igb 0000:07:00.0: added PHC on eth0 [ 2.286386] igb 0000:07:00.0: Intel(R) Gigabit Ethernet Network Connection [ 2.286515] igb 0000:07:00.0: eth0: (PCIe:2.5Gb/s:Width x1) 0c:c4:7a:9f:87:be [ 2.286681] igb 0000:07:00.0: eth0: PBA No: 010C00-000 [ 2.286796] igb 0000:07:00.0: Using MSI-X interrupts. 4 rx queue(s), 4 tx queue(s) [ 2.287036] xen: registering gsi 17 triggering 0 polarity 1 [ 2.287045] Already setup the GSI :17 [ 2.316614] pps pps1: new PPS source ptp1 [ 2.316799] igb 0000:08:00.0: added PHC on eth1 [ 2.316932] igb 0000:08:00.0: Intel(R) Gigabit Ethernet Network Connection [ 2.317052] igb 0000:08:00.0: eth1: (PCIe:2.5Gb/s:Width x1) 0c:c4:7a:9f:87:bf [ 2.317217] igb 0000:08:00.0: eth1: PBA No: 010000-000 [ 2.317333] igb 0000:08:00.0: Using MSI-X interrupts. 4 rx queue(s), 4 tx queue(s) [ 2.317580] xen: registering gsi 16 triggering 0 polarity 1 [ 2.317587] Already setup the GSI :16 [ 2.375409] igb 0000:0b:00.0: added PHC on eth2 [ 2.375564] igb 0000:0b:00.0: Intel(R) Gigabit Ethernet Network Connection [ 2.375685] igb 0000:0b:00.0: eth2: (PCIe:5.0Gb/s:Width x4) 0c:c4:7a:9f:87:c0 [ 2.375888] igb 0000:0b:00.0: eth2: PBA No: 010000-000 [ 2.376009] igb 0000:0b:00.0: Using MSI-X interrupts. 8 rx queue(s), 8 tx queue(s) [ 2.376234] xen: registering gsi 17 triggering 0 polarity 1 [ 2.376243] Already setup the GSI :17 [ 2.432337] igb 0000:0b:00.1: added PHC on eth3 [ 2.432493] igb 0000:0b:00.1: Intel(R) Gigabit Ethernet Network Connection [ 2.432614] igb 0000:0b:00.1: eth3: (PCIe:5.0Gb/s:Width x4) 0c:c4:7a:9f:87:c1 [ 2.432809] igb 0000:0b:00.1: eth3: PBA No: 010000-000 [ 2.432924] igb 0000:0b:00.1: Using MSI-X interrupts. 8 rx queue(s), 8 tx queue(s) [ 2.433162] xen: registering gsi 18 triggering 0 polarity 1 [ 2.433171] Already setup the GSI :18 [ 2.491135] igb 0000:0b:00.2: added PHC on eth4 [ 2.491280] igb 0000:0b:00.2: Intel(R) Gigabit Ethernet Network Connection [ 2.491402] igb 0000:0b:00.2: eth4: (PCIe:5.0Gb/s:Width x4) 0c:c4:7a:9f:87:c2 [ 2.491632] igb 0000:0b:00.2: eth4: PBA No: 010000-000 [ 2.491749] igb 0000:0b:00.2: Using MSI-X interrupts. 8 rx queue(s), 8 tx queue(s) [ 2.491994] xen: registering gsi 19 triggering 0 polarity 1 [ 2.492003] Already setup the GSI :19 [ 2.549905] igb 0000:0b:00.3: added PHC on eth5 [ 2.550043] igb 0000:0b:00.3: Intel(R) Gigabit Ethernet Network Connection [ 2.550164] igb 0000:0b:00.3: eth5: (PCIe:5.0Gb/s:Width x4) 0c:c4:7a:9f:87:c3 [ 2.550367] igb 0000:0b:00.3: eth5: PBA No: 010000-000 [ 2.550497] igb 0000:0b:00.3: Using MSI-X interrupts. 8 rx queue(s), 8 tx queue(s) [ 2.553016] igb 0000:0b:00.0 enx0cc47a9f87c0: renamed from eth2 [ 2.562075] igb 0000:08:00.0 enx0cc47a9f87bf: renamed from eth1 [ 2.571710] igb 0000:07:00.0 enx0cc47a9f87be: renamed from eth0 [ 2.579744] igb 0000:0b:00.1 enx0cc47a9f87c1: renamed from eth3 [ 2.589907] igb 0000:0b:00.2 enx0cc47a9f87c2: renamed from eth4 [ 2.599275] igb 0000:0b:00.3 enx0cc47a9f87c3: renamed from eth5 [ 2.992505] ixgbe 0000:04:00.0: Multiqueue Enabled: Rx Queue count = 8, Tx Queue count = 8 XDP Queue count = 0 [ 3.122151] ixgbe 0000:04:00.0: MAC: 5, PHY: 0, PBA No: 020B00-000 [ 3.122391] ixgbe 0000:04:00.0: 0c:c4:7a:9f:8f:b6 [ 3.411692] ixgbe 0000:04:00.0: Intel(R) 10 Gigabit Network Connection [ 3.412038] ACPI Warning: \_SB.PCI0.BR2C._PRT: Return Package has no elements (empty) (20220331/nsprepkg-94) [ 3.412258] xen: registering gsi 17 triggering 0 polarity 1 [ 3.412268] Already setup the GSI :17 [ 4.157118] ixgbe 0000:04:00.1: Multiqueue Enabled: Rx Queue count = 8, Tx Queue count = 8 XDP Queue count = 0 [ 4.286896] ixgbe 0000:04:00.1: MAC: 5, PHY: 0, PBA No: 020B00-000 [ 4.287056] ixgbe 0000:04:00.1: 0c:c4:7a:9f:8f:b7 [ 4.579239] ixgbe 0000:04:00.1: Intel(R) 10 Gigabit Network Connection [ 4.581725] ixgbe 0000:04:00.1 enx0cc47a9f8fb7: renamed from eth1 [ 4.589943] ixgbe 0000:04:00.0 enx0cc47a9f8fb6: renamed from eth0 [ 5.001157] EXT4-fs (dm-0): mounting ext3 file system using the ext4 subsystem [ 5.008911] EXT4-fs (dm-0): mounted filesystem with ordered data mode. Quota mode: none. [ 8.653763] EXT4-fs (dm-0): re-mounted. Quota mode: none. [ 9.531758] EXT4-fs (sda1): mounting ext3 file system using the ext4 subsystem [ 9.535820] EXT4-fs (sda1): mounted filesystem with ordered data mode. Quota mode: none. [ 9.614181] Adding 1949692k swap on /dev/mapper/debina0--vg-swap_1. Priority:-2 extents:1 across:1949692k [ 11.136381] xenbr0: port 1(enx0cc47a9f87be) entered blocking state [ 11.136567] xenbr0: port 1(enx0cc47a9f87be) entered disabled state [ 11.136745] device enx0cc47a9f87be entered promiscuous mode [ 14.645076] igb 0000:07:00.0 enx0cc47a9f87be: igb: enx0cc47a9f87be NIC Link is Up 1000 Mbps Full Duplex, Flow Control: RX [ 14.853786] IPv6: ADDRCONF(NETDEV_CHANGE): enx0cc47a9f87be: link becomes ready [ 14.854013] xenbr0: port 1(enx0cc47a9f87be) entered blocking state [ 14.854137] xenbr0: port 1(enx0cc47a9f87be) entered forwarding state [ 14.854410] IPv6: ADDRCONF(NETDEV_CHANGE): xenbr0: link becomes ready