[ 0.000000] Linux version 6.10.0-rc3+ (osstest@pinot0) (gcc (Debian 12.2.0-14) 12.2.0, GNU ld (GNU Binutils for Debian) 2.40) #1 SMP PREEMPT_DYNAMIC Sat Jun 15 14:20:28 UTC 2024 [ 0.000000] Command line: placeholder root=/dev/mapper/debina0--vg-root ro console=hvc0 [ 0.000000] Released 0 page(s) [ 0.000000] BIOS-provided physical RAM map: [ 0.000000] Xen: [mem 0x0000000000000000-0x0000000000099fff] usable [ 0.000000] Xen: [mem 0x000000000009ac00-0x00000000000fffff] reserved [ 0.000000] Xen: [mem 0x0000000000100000-0x0000000020065fff] usable [ 0.000000] Xen: [mem 0x00000000796ef000-0x00000000798bdfff] reserved [ 0.000000] Xen: [mem 0x00000000799b7000-0x0000000079e5afff] ACPI NVS [ 0.000000] Xen: [mem 0x0000000079e5b000-0x000000007bdb0fff] reserved [ 0.000000] Xen: [mem 0x000000007bdb2000-0x000000007be37fff] reserved [ 0.000000] Xen: [mem 0x0000000080000000-0x000000008fffffff] reserved [ 0.000000] Xen: [mem 0x00000000fbffc000-0x00000000fbffcfff] reserved [ 0.000000] Xen: [mem 0x00000000fec00000-0x00000000fec00fff] reserved [ 0.000000] Xen: [mem 0x00000000fed1c000-0x00000000fed1ffff] reserved [ 0.000000] Xen: [mem 0x00000000fee00000-0x00000000feefffff] reserved [ 0.000000] Xen: [mem 0x00000000ff000000-0x00000000ffffffff] reserved [ 0.000000] NX (Execute Disable) protection: active [ 0.000000] APIC: Static calls initialized [ 0.000000] SMBIOS 2.8 present. [ 0.000000] DMI: Supermicro SYS-5018D-FN8T/X10SDV-TP8F, BIOS 1.0b 11/21/2016 [ 0.000000] DMI: Memory slots populated: 1/4 [ 0.000000] Hypervisor detected: Xen PV [ 0.000029] Xen PV: Detected 8 vCPUS [ 0.000487] tsc: Detected 2199.998 MHz processor [ 0.000923] e820: update [mem 0x00000000-0x00000fff] usable ==> reserved [ 0.000926] e820: remove [mem 0x000a0000-0x000fffff] usable [ 0.000934] last_pfn = 0x20066 max_arch_pfn = 0x400000000 [ 0.000937] MTRR map: 2 entries (0 fixed + 2 variable; max 20), built from 10 variable MTRRs [ 0.000938] MTRRs set to read-only [ 0.000942] x86/PAT: Configuration [0-7]: WB WT UC- UC WC WP UC UC [ 0.000984] Kernel/User page tables isolation: disabled on XEN PV. [ 0.026569] RAMDISK: [mem 0x04000000-0x053a4fff] [ 0.026578] ACPI: Early table checksum verification disabled [ 0.027183] ACPI: RSDP 0x00000000000F0580 000024 (v02 SUPERM) [ 0.027195] ACPI: XSDT 0x00000000799FF098 0000B4 (v01 SUPERM SMCI--MB 01072009 AMI 00010013) [ 0.027232] ACPI: FACP 0x0000000079A17AC0 00010C (v05 SUPERM SMCI--MB 01072009 AMI 00010013) [ 0.027280] ACPI: DSDT 0x00000000799FF1E8 0188D5 (v02 SUPERM SMCI--MB 01072009 INTL 20091013) [ 0.027296] ACPI: FACS 0x0000000079E59F80 000040 [ 0.027313] ACPI: APIC 0x0000000079A17BD0 0000BC (v03 SUPERM SMCI--MB 01072009 AMI 00010013) [ 0.027329] ACPI: FPDT 0x0000000079A17C90 000044 (v01 SUPERM SMCI--MB 01072009 AMI 00010013) [ 0.027345] ACPI: FIDT 0x0000000079A17CD8 00009C (v01 SUPERM SMCI--MB 01072009 AMI 00010013) [ 0.027361] ACPI: MCFG 0x0000000079A17D78 00003C (v01 SUPERM SMCI--MB 01072009 MSFT 00000097) [ 0.027377] ACPI: UEFI 0x0000000079A17DB8 000042 (v01 00000000 00000000) [ 0.027394] ACPI: DBG2 0x0000000079A17E00 000072 (v00 SUPERM SMCI--MB 00000000 INTL 20091013) [ 0.027410] ACPI: HPET 0x0000000079A17E78 000038 (v01 SUPERM SMCI--MB 00000001 INTL 20091013) [ 0.027426] ACPI: WDDT 0x0000000079A17EB0 000040 (v01 SUPERM SMCI--MB 00000000 INTL 20091013) [ 0.027442] ACPI: SSDT 0x0000000079A17EF0 00ED8B (v01 AMI PmMgt 00000001 INTL 20120913) [ 0.027459] ACPI: SSDT 0x0000000079A26C80 002285 (v02 SUPERM SpsNm 00000002 INTL 20120913) [ 0.027475] ACPI: SSDT 0x0000000079A28F08 000064 (v02 SUPERM SpsNvs 00000002 INTL 20120913) [ 0.027491] ACPI: PRAD 0x0000000079A28F70 000102 (v02 SUPERM SMCI--MB 00000002 INTL 20120913) [ 0.027507] ACPI: RMAD 0x0000000079A29078 0000CC (v01 SUPERM SMCI--MB 00000001 INTL 20091013) [ 0.027523] ACPI: HEST 0x0000000079A29148 0000A8 (v01 SUPERM SMCI--MB 00000001 INTL 00000001) [ 0.027540] ACPI: BERT 0x0000000079A291F0 000030 (v01 SUPERM SMCI--MB 00000001 INTL 00000001) [ 0.027556] ACPI: ERST 0x0000000079A29220 000230 (v01 SUPERM SMCI--MB 00000001 INTL 00000001) [ 0.027572] ACPI: EINJ 0x0000000079A29450 000130 (v01 SUPERM SMCI--MB 00000001 INTL 00000001) [ 0.027581] ACPI: Reserving FACP table memory at [mem 0x79a17ac0-0x79a17bcb] [ 0.027583] ACPI: Reserving DSDT table memory at [mem 0x799ff1e8-0x79a17abc] [ 0.027584] ACPI: Reserving FACS table memory at [mem 0x79e59f80-0x79e59fbf] [ 0.027585] ACPI: Reserving APIC table memory at [mem 0x79a17bd0-0x79a17c8b] [ 0.027586] ACPI: Reserving FPDT table memory at [mem 0x79a17c90-0x79a17cd3] [ 0.027587] ACPI: Reserving FIDT table memory at [mem 0x79a17cd8-0x79a17d73] [ 0.027587] ACPI: Reserving MCFG table memory at [mem 0x79a17d78-0x79a17db3] [ 0.027588] ACPI: Reserving UEFI table memory at [mem 0x79a17db8-0x79a17df9] [ 0.027589] ACPI: Reserving DBG2 table memory at [mem 0x79a17e00-0x79a17e71] [ 0.027590] ACPI: Reserving HPET table memory at [mem 0x79a17e78-0x79a17eaf] [ 0.027591] ACPI: Reserving WDDT table memory at [mem 0x79a17eb0-0x79a17eef] [ 0.027592] ACPI: Reserving SSDT table memory at [mem 0x79a17ef0-0x79a26c7a] [ 0.027593] ACPI: Reserving SSDT table memory at [mem 0x79a26c80-0x79a28f04] [ 0.027594] ACPI: Reserving SSDT table memory at [mem 0x79a28f08-0x79a28f6b] [ 0.027595] ACPI: Reserving PRAD table memory at [mem 0x79a28f70-0x79a29071] [ 0.027596] ACPI: Reserving RMAD table memory at [mem 0x79a29078-0x79a29143] [ 0.027597] ACPI: Reserving HEST table memory at [mem 0x79a29148-0x79a291ef] [ 0.027598] ACPI: Reserving BERT table memory at [mem 0x79a291f0-0x79a2921f] [ 0.027599] ACPI: Reserving ERST table memory at [mem 0x79a29220-0x79a2944f] [ 0.027600] ACPI: Reserving EINJ table memory at [mem 0x79a29450-0x79a2957f] [ 0.027709] APIC: Switched APIC routing to: Xen PV [ 0.031889] Zone ranges: [ 0.031890] DMA [mem 0x0000000000001000-0x0000000000ffffff] [ 0.031893] DMA32 [mem 0x0000000001000000-0x0000000020065fff] [ 0.031895] Normal empty [ 0.031896] Movable zone start for each node [ 0.031897] Early memory node ranges [ 0.031897] node 0: [mem 0x0000000000001000-0x0000000000099fff] [ 0.031899] node 0: [mem 0x0000000000100000-0x0000000020065fff] [ 0.031901] Initmem setup node 0 [mem 0x0000000000001000-0x0000000020065fff] [ 0.031907] On node 0, zone DMA: 1 pages in unavailable ranges [ 0.031946] On node 0, zone DMA: 102 pages in unavailable ranges [ 0.033431] On node 0, zone DMA32: 32666 pages in unavailable ranges [ 0.033436] p2m virtual area at (____ptrval____), size is 40000000 [ 0.160140] Remapped 102 page(s) [ 0.161573] ACPI: PM-Timer IO Port: 0x408 [ 0.161643] ACPI: LAPIC_NMI (acpi_id[0x00] high level lint[0x1]) [ 0.161646] ACPI: LAPIC_NMI (acpi_id[0x02] high level lint[0x1]) [ 0.161648] ACPI: LAPIC_NMI (acpi_id[0x04] high level lint[0x1]) [ 0.161649] ACPI: LAPIC_NMI (acpi_id[0x06] high level lint[0x1]) [ 0.161651] ACPI: LAPIC_NMI (acpi_id[0x01] high level lint[0x1]) [ 0.161652] ACPI: LAPIC_NMI (acpi_id[0x03] high level lint[0x1]) [ 0.161654] ACPI: LAPIC_NMI (acpi_id[0x05] high level lint[0x1]) [ 0.161656] ACPI: LAPIC_NMI (acpi_id[0x07] high level lint[0x1]) [ 0.161685] IOAPIC[0]: apic_id 8, version 32, address 0xfec00000, GSI 0-23 [ 0.161698] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl) [ 0.161702] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level) [ 0.161729] ACPI: Using ACPI (MADT) for SMP configuration information [ 0.161734] ACPI: HPET id: 0x8086a701 base: 0xfed00000 [ 0.161747] CPU topo: Max. logical packages: 1 [ 0.161748] CPU topo: Max. logical dies: 1 [ 0.161749] CPU topo: Max. dies per package: 1 [ 0.161755] CPU topo: Max. threads per core: 2 [ 0.161756] CPU topo: Num. cores per package: 4 [ 0.161757] CPU topo: Num. threads per package: 8 [ 0.161758] CPU topo: Allowing 8 present CPUs plus 0 hotplug CPUs [ 0.161772] PM: hibernation: Registered nosave memory: [mem 0x00000000-0x00000fff] [ 0.161774] PM: hibernation: Registered nosave memory: [mem 0x0009a000-0x0009afff] [ 0.161776] PM: hibernation: Registered nosave memory: [mem 0x0009b000-0x000fffff] [ 0.161777] [mem 0x90000000-0xfbffbfff] available for PCI devices [ 0.161787] Booting kernel on Xen [ 0.161788] Xen version: 4.19-unstable (preserve-AD) [ 0.161791] clocksource: refined-jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 1910969940391419 ns [ 0.168880] setup_percpu: NR_CPUS:64 nr_cpumask_bits:8 nr_cpu_ids:8 nr_node_ids:1 [ 0.169353] percpu: Embedded 57 pages/cpu s194408 r8192 d30872 u262144 [ 0.169359] pcpu-alloc: s194408 r8192 d30872 u262144 alloc=1*2097152 [ 0.169362] pcpu-alloc: [0] 0 1 2 3 4 5 6 7 [ 0.169434] xen: PV spinlocks enabled [ 0.169437] PV qspinlock hash table entries: 256 (order: 0, 4096 bytes, linear) [ 0.169440] Kernel command line: placeholder root=/dev/mapper/debina0--vg-root ro console=hvc0 [ 0.169480] Unknown kernel command line parameters "placeholder", will be passed to user space. [ 0.169491] random: crng init done [ 0.169565] Dentry cache hash table entries: 65536 (order: 7, 524288 bytes, linear) [ 0.169606] Inode-cache hash table entries: 32768 (order: 6, 262144 bytes, linear) [ 0.170958] Built 1 zonelists, mobility grouping on. Total pages: 131071 [ 0.170961] mem auto-init: stack:all(zero), heap alloc:off, heap free:off, mlocked free:off [ 0.170964] software IO TLB: area num 8. [ 0.234817] Memory: 385608K/524284K available (16384K kernel code, 2753K rwdata, 6164K rodata, 2680K init, 1864K bss, 138424K reserved, 0K cma-reserved) [ 0.234979] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=8, Nodes=1 [ 0.237644] Dynamic Preempt: voluntary [ 0.237894] rcu: Preemptible hierarchical RCU implementation. [ 0.237895] rcu: RCU event tracing is enabled. [ 0.237896] rcu: RCU restricting CPUs from NR_CPUS=64 to nr_cpu_ids=8. [ 0.237898] Trampoline variant of Tasks RCU enabled. [ 0.237899] rcu: RCU calculated value of scheduler-enlistment delay is 100 jiffies. [ 0.237900] rcu: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=8 [ 0.237934] RCU Tasks: Setting shift to 3 and lim to 1 rcu_task_cb_adjust=1. [ 0.249624] NR_IRQS: 4352, nr_irqs: 488, preallocated irqs: 16 [ 0.249785] xen:events: Using FIFO-based ABI [ 0.249816] xen: --> pirq=1 -> irq=1 (gsi=1) [ 0.249825] xen: --> pirq=2 -> irq=2 (gsi=2) [ 0.249833] xen: --> pirq=3 -> irq=3 (gsi=3) [ 0.249840] xen: --> pirq=4 -> irq=4 (gsi=4) [ 0.249848] xen: --> pirq=5 -> irq=5 (gsi=5) [ 0.249856] xen: --> pirq=6 -> irq=6 (gsi=6) [ 0.249863] xen: --> pirq=7 -> irq=7 (gsi=7) [ 0.249871] xen: --> pirq=8 -> irq=8 (gsi=8) [ 0.249879] xen: --> pirq=9 -> irq=9 (gsi=9) [ 0.249886] xen: --> pirq=10 -> irq=10 (gsi=10) [ 0.249894] xen: --> pirq=11 -> irq=11 (gsi=11) [ 0.249902] xen: --> pirq=12 -> irq=12 (gsi=12) [ 0.249910] xen: --> pirq=13 -> irq=13 (gsi=13) [ 0.249917] xen: --> pirq=14 -> irq=14 (gsi=14) [ 0.249926] xen: --> pirq=15 -> irq=15 (gsi=15) [ 0.249936] rcu: srcu_init: Setting srcu_struct sizes based on contention. [ 0.255339] Console: colour VGA+ 80x25 [ 0.255343] printk: legacy console [tty0] enabled [ 0.274852] printk: legacy console [hvc0] enabled [ 0.276246] ACPI: Core revision 20240322 [ 0.290294] clocksource: xen: mask: 0xffffffffffffffff max_cycles: 0x1cd42e4dffb, max_idle_ns: 881590591483 ns [ 0.290456] Xen: using vcpuop timer interface [ 0.290464] installing Xen timer for CPU 0 [ 0.290624] clocksource: tsc-early: mask: 0xffffffffffffffff max_cycles: 0x1fb63109b96, max_idle_ns: 440795265316 ns [ 0.290785] Calibrating delay loop (skipped), value calculated using timer frequency.. 4399.99 BogoMIPS (lpj=2199998) [ 0.291118] Last level iTLB entries: 4KB 64, 2MB 8, 4MB 8 [ 0.291236] Last level dTLB entries: 4KB 64, 2MB 0, 4MB 0, 1GB 4 [ 0.291365] Spectre V1 : Mitigation: usercopy/swapgs barriers and __user pointer sanitization [ 0.291515] Spectre V2 : Mitigation: Retpolines [ 0.291792] Spectre V2 : Spectre v2 / SpectreRSB mitigation: Filling RSB on context switch [ 0.291958] Spectre V2 : Spectre v2 / SpectreRSB : Filling RSB on VMEXIT [ 0.292078] Spectre V2 : Enabling Restricted Speculation for firmware calls [ 0.292200] Spectre V2 : mitigation: Enabling conditional Indirect Branch Prediction Barrier [ 0.292349] Spectre V2 : User space: Mitigation: STIBP via prctl [ 0.292468] Speculative Store Bypass: Mitigation: Speculative Store Bypass disabled via prctl [ 0.292622] MDS: Mitigation: Clear CPU buffers [ 0.292788] TAA: Mitigation: Clear CPU buffers [ 0.292902] MMIO Stale Data: Vulnerable: Clear CPU buffers attempted, no microcode [ 0.293067] x86/fpu: Supporting XSAVE feature 0x001: 'x87 floating point registers' [ 0.293213] x86/fpu: Supporting XSAVE feature 0x002: 'SSE registers' [ 0.293333] x86/fpu: Supporting XSAVE feature 0x004: 'AVX registers' [ 0.293453] x86/fpu: xstate_offset[2]: 576, xstate_sizes[2]: 256 [ 0.293580] x86/fpu: Enabled xstate features 0x7, context size is 832 bytes, using 'standard' format. [ 0.316286] Freeing SMP alternatives memory: 40K [ 0.316419] pid_max: default: 32768 minimum: 301 [ 0.316556] LSM: initializing lsm=capability,selinux [ 0.316678] SELinux: Initializing. [ 0.316814] Mount-cache hash table entries: 1024 (order: 1, 8192 bytes, linear) [ 0.316969] Mountpoint-cache hash table entries: 1024 (order: 1, 8192 bytes, linear) [ 0.317872] cpu 0 spinlock event irq 25 [ 0.317992] VPMU disabled by hypervisor. [ 0.318567] Performance Events: unsupported p6 CPU model 86 no PMU driver, software events only. [ 0.318723] signal: max sigframe size: 1776 [ 0.318860] rcu: Hierarchical SRCU implementation. [ 0.318977] rcu: Max phase no-delay instances is 400. [ 0.319589] smp: Bringing up secondary CPUs ... [ 0.319951] installing Xen timer for CPU 1 [ 0.320408] installing Xen timer for CPU 2 [ 0.320849] installing Xen timer for CPU 3 [ 0.041843] [Firmware Bug]: CPU 1: APIC ID mismatch. Firmware: 0x0002 APIC: 0x0001 [ 0.321080] cpu 1 spinlock event irq 45 [ 0.321933] MDS CPU bug present and SMT on, data leak possible. See https://www.kernel.org/doc/html/latest/admin-guide/hw-vuln/mds.html for more details. [ 0.322107] TAA CPU bug present and SMT on, data leak possible. See https://www.kernel.org/doc/html/latest/admin-guide/hw-vuln/tsx_async_abort.html for more details. [ 0.322297] MMIO Stale Data CPU bug present and SMT on, data leak possible. See https://www.kernel.org/doc/html/latest/admin-guide/hw-vuln/processor_mmio_stale_data.html for more details. [ 0.041843] [Firmware Bug]: CPU 2: APIC ID mismatch. Firmware: 0x0004 APIC: 0x0002 [ 0.322976] cpu 2 spinlock event irq 46 [ 0.041843] [Firmware Bug]: CPU 3: APIC ID mismatch. Firmware: 0x0006 APIC: 0x0003 [ 0.323787] cpu 3 spinlock event irq 47 [ 0.324019] installing Xen timer for CPU 4 [ 0.324806] installing Xen timer for CPU 5 [ 0.325257] installing Xen timer for CPU 6 [ 0.325676] installing Xen timer for CPU 7 [ 0.041843] [Firmware Bug]: CPU 4: APIC ID mismatch. Firmware: 0x0001 APIC: 0x0004 [ 0.325892] cpu 4 spinlock event irq 68 [ 0.041843] [Firmware Bug]: CPU 5: APIC ID mismatch. Firmware: 0x0003 APIC: 0x0005 [ 0.326091] cpu 5 spinlock event irq 69 [ 0.041843] [Firmware Bug]: CPU 6: APIC ID mismatch. Firmware: 0x0005 APIC: 0x0006 [ 0.326834] cpu 6 spinlock event irq 70 [ 0.327826] cpu 7 spinlock event irq 71 [ 0.327998] smp: Brought up 1 node, 8 CPUs [ 0.328236] devtmpfs: initialized [ 0.328822] x86/mm: Memory block size: 128MB [ 0.329355] ACPI: PM: Registering ACPI NVS region [mem 0x799b7000-0x79e5afff] (4866048 bytes) [ 0.329355] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 1911260446275000 ns [ 0.329793] futex hash table entries: 2048 (order: 5, 131072 bytes, linear) [ 0.330055] PM: RTC time: 14:53:16, date: 2024-06-15 [ 0.330297] NET: Registered PF_NETLINK/PF_ROUTE protocol family [ 0.330441] xen:grant_table: Grant tables using version 1 layout [ 0.330584] Grant table initialized [ 0.330936] audit: initializing netlink subsys (disabled) [ 0.331069] audit: type=2000 audit(1718463196.700:1): state=initialized audit_enabled=0 res=1 [ 0.331069] thermal_sys: Registered thermal governor 'step_wise' [ 0.331069] thermal_sys: Registered thermal governor 'user_space' [ 0.331069] ACPI FADT declares the system doesn't support PCIe ASPM, so disable it [ 0.331987] PCI: ECAM [mem 0x80000000-0x8fffffff] (base 0x80000000) for domain 0000 [bus 00-ff] [ 0.466721] PCI: Using configuration type 1 for base access [ 0.466857] kprobes: kprobe jump-optimization is enabled. All kprobes are optimized if possible. [ 0.467001] ACPI: Added _OSI(Module Device) [ 0.467001] ACPI: Added _OSI(Processor Device) [ 0.467793] ACPI: Added _OSI(3.0 _SCP Extensions) [ 0.467908] ACPI: Added _OSI(Processor Aggregator Device) [ 0.497143] ACPI: 4 ACPI AML tables successfully acquired and loaded [ 0.499249] xen: registering gsi 9 triggering 0 polarity 0 [ 0.502350] ACPI: Dynamic OEM Table Load: [ 0.505507] ACPI: _OSC evaluated successfully for all CPUs [ 0.505844] ACPI: Interpreter enabled [ 0.505987] ACPI: PM: (supports S0 S4 S5) [ 0.506101] ACPI: Using IOAPIC for interrupt routing [ 0.506251] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug [ 0.506410] PCI: Using E820 reservations for host bridge windows [ 0.507019] ACPI: Enabled 6 GPEs in block 00 to 3F [ 0.532826] ACPI: PCI Root Bridge [UNC0] (domain 0000 [bus ff]) [ 0.532957] acpi PNP0A03:03: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI HPX-Type3] [ 0.533193] acpi PNP0A03:03: _OSC: platform does not support [LTR] [ 0.533450] acpi PNP0A03:03: _OSC: OS now controls [PME PCIeCapability] [ 0.533572] acpi PNP0A03:03: FADT indicates ASPM is unsupported, using BIOS configuration [ 0.533748] PCI host bridge to bus 0000:ff [ 0.533789] pci_bus 0000:ff: root bus resource [bus ff] [ 0.533991] pci 0000:ff:0b.0: [8086:6f81] type 00 class 0x088000 conventional PCI endpoint [ 0.534488] pci 0000:ff:0b.1: [8086:6f36] type 00 class 0x110100 conventional PCI endpoint [ 0.534963] pci 0000:ff:0b.2: [8086:6f37] type 00 class 0x110100 conventional PCI endpoint [ 0.535431] pci 0000:ff:0b.3: [8086:6f76] type 00 class 0x088000 conventional PCI endpoint [ 0.535921] pci 0000:ff:0c.0: [8086:6fe0] type 00 class 0x088000 conventional PCI endpoint [ 0.536387] pci 0000:ff:0c.1: [8086:6fe1] type 00 class 0x088000 conventional PCI endpoint [ 0.536862] pci 0000:ff:0c.2: [8086:6fe2] type 00 class 0x088000 conventional PCI endpoint [ 0.537327] pci 0000:ff:0c.3: [8086:6fe3] type 00 class 0x088000 conventional PCI endpoint [ 0.537821] pci 0000:ff:0f.0: [8086:6ff8] type 00 class 0x088000 conventional PCI endpoint [ 0.538307] pci 0000:ff:0f.4: [8086:6ffc] type 00 class 0x088000 conventional PCI endpoint [ 0.538772] pci 0000:ff:0f.5: [8086:6ffd] type 00 class 0x088000 conventional PCI endpoint [ 0.539243] pci 0000:ff:0f.6: [8086:6ffe] type 00 class 0x088000 conventional PCI endpoint [ 0.539720] pci 0000:ff:10.0: [8086:6f1d] type 00 class 0x088000 conventional PCI endpoint [ 0.540106] pci 0000:ff:10.1: [8086:6f34] type 00 class 0x110100 conventional PCI endpoint [ 0.540586] pci 0000:ff:10.5: [8086:6f1e] type 00 class 0x088000 conventional PCI endpoint [ 0.541058] pci 0000:ff:10.6: [8086:6f7d] type 00 class 0x110100 conventional PCI endpoint [ 0.541526] pci 0000:ff:10.7: [8086:6f1f] type 00 class 0x088000 conventional PCI endpoint [ 0.542001] pci 0000:ff:12.0: [8086:6fa0] type 00 class 0x088000 conventional PCI endpoint [ 0.542293] pci 0000:ff:12.1: [8086:6f30] type 00 class 0x110100 conventional PCI endpoint [ 0.542797] pci 0000:ff:13.0: [8086:6fa8] type 00 class 0x088000 conventional PCI endpoint [ 0.543316] pci 0000:ff:13.1: [8086:6f71] type 00 class 0x088000 conventional PCI endpoint [ 0.543855] pci 0000:ff:13.2: [8086:6faa] type 00 class 0x088000 conventional PCI endpoint [ 0.544367] pci 0000:ff:13.3: [8086:6fab] type 00 class 0x088000 conventional PCI endpoint [ 0.544883] pci 0000:ff:13.4: [8086:6fac] type 00 class 0x088000 conventional PCI endpoint [ 0.545395] pci 0000:ff:13.5: [8086:6fad] type 00 class 0x088000 conventional PCI endpoint [ 0.545902] pci 0000:ff:13.6: [8086:6fae] type 00 class 0x088000 conventional PCI endpoint [ 0.546371] pci 0000:ff:13.7: [8086:6faf] type 00 class 0x088000 conventional PCI endpoint [ 0.546855] pci 0000:ff:14.0: [8086:6fb0] type 00 class 0x088000 conventional PCI endpoint [ 0.547368] pci 0000:ff:14.1: [8086:6fb1] type 00 class 0x088000 conventional PCI endpoint [ 0.547890] pci 0000:ff:14.2: [8086:6fb2] type 00 class 0x088000 conventional PCI endpoint [ 0.548404] pci 0000:ff:14.3: [8086:6fb3] type 00 class 0x088000 conventional PCI endpoint [ 0.548910] pci 0000:ff:14.4: [8086:6fbc] type 00 class 0x088000 conventional PCI endpoint [ 0.549378] pci 0000:ff:14.5: [8086:6fbd] type 00 class 0x088000 conventional PCI endpoint [ 0.549851] pci 0000:ff:14.6: [8086:6fbe] type 00 class 0x088000 conventional PCI endpoint [ 0.550319] pci 0000:ff:14.7: [8086:6fbf] type 00 class 0x088000 conventional PCI endpoint [ 0.550797] pci 0000:ff:15.0: [8086:6fb4] type 00 class 0x088000 conventional PCI endpoint [ 0.551310] pci 0000:ff:15.1: [8086:6fb5] type 00 class 0x088000 conventional PCI endpoint [ 0.552153] pci 0000:ff:15.2: [8086:6fb6] type 00 class 0x088000 conventional PCI endpoint [ 0.552699] pci 0000:ff:15.3: [8086:6fb7] type 00 class 0x088000 conventional PCI endpoint [ 0.553203] pci 0000:ff:1e.0: [8086:6f98] type 00 class 0x088000 conventional PCI endpoint [ 0.553670] pci 0000:ff:1e.1: [8086:6f99] type 00 class 0x088000 conventional PCI endpoint [ 0.554107] pci 0000:ff:1e.2: [8086:6f9a] type 00 class 0x088000 conventional PCI endpoint [ 0.554581] pci 0000:ff:1e.3: [8086:6fc0] type 00 class 0x088000 conventional PCI endpoint [ 0.554883] pci 0000:ff:1e.4: [8086:6f9c] type 00 class 0x088000 conventional PCI endpoint [ 0.555364] pci 0000:ff:1f.0: [8086:6f88] type 00 class 0x088000 conventional PCI endpoint [ 0.555844] pci 0000:ff:1f.2: [8086:6f8a] type 00 class 0x088000 conventional PCI endpoint [ 0.556315] pci_bus 0000:ff: on NUMA node 0 [ 0.560546] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-fe]) [ 0.560674] acpi PNP0A08:00: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI HPX-Type3] [ 0.560912] acpi PNP0A08:00: _OSC: platform does not support [PME LTR] [ 0.561246] acpi PNP0A08:00: _OSC: OS now controls [PCIeCapability] [ 0.561367] acpi PNP0A08:00: FADT indicates ASPM is unsupported, using BIOS configuration [ 0.561876] PCI host bridge to bus 0000:00 [ 0.561992] pci_bus 0000:00: root bus resource [io 0x0000-0x0cf7 window] [ 0.562113] pci_bus 0000:00: root bus resource [io 0x1000-0xffff window] [ 0.562235] pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff window] [ 0.562380] pci_bus 0000:00: root bus resource [mem 0x90000000-0xfbffbfff window] [ 0.562526] pci_bus 0000:00: root bus resource [bus 00-fe] [ 0.562716] pci 0000:00:00.0: [8086:6f00] type 00 class 0x060000 PCIe Root Port [ 0.563356] pci 0000:00:01.0: [8086:6f02] type 01 class 0x060400 PCIe Root Port [ 0.563663] pci 0000:00:01.0: PCI bridge to [bus 01] [ 0.564108] pci 0000:00:01.0: PME# supported from D0 D3hot D3cold [ 0.564506] pci 0000:00:01.1: [8086:6f03] type 01 class 0x060400 PCIe Root Port [ 0.564815] pci 0000:00:01.1: PCI bridge to [bus 02] [ 0.565242] pci 0000:00:01.1: PME# supported from D0 D3hot D3cold [ 0.565655] pci 0000:00:02.0: [8086:6f04] type 01 class 0x060400 PCIe Root Port [ 0.565965] pci 0000:00:02.0: PCI bridge to [bus 03] [ 0.566107] pci 0000:00:02.0: bridge window [mem 0xfb500000-0xfb5fffff] [ 0.566513] pci 0000:00:02.0: PME# supported from D0 D3hot D3cold [ 0.566924] pci 0000:00:02.2: [8086:6f06] type 01 class 0x060400 PCIe Root Port [ 0.567238] pci 0000:00:02.2: PCI bridge to [bus 04] [ 0.567377] pci 0000:00:02.2: bridge window [mem 0xfb400000-0xfb4fffff] [ 0.567544] pci 0000:00:02.2: bridge window [mem 0xfba00000-0xfbefffff 64bit pref] [ 0.567953] pci 0000:00:02.2: PME# supported from D0 D3hot D3cold [ 0.568364] pci 0000:00:03.0: [8086:6f08] type 01 class 0x060400 PCIe Root Port [ 0.568673] pci 0000:00:03.0: PCI bridge to [bus 05] [ 0.569124] pci 0000:00:03.0: PME# supported from D0 D3hot D3cold [ 0.569525] pci 0000:00:03.2: [8086:6f0a] type 01 class 0x060400 PCIe Root Port [ 0.569834] pci 0000:00:03.2: PCI bridge to [bus 06] [ 0.570269] pci 0000:00:03.2: PME# supported from D0 D3hot D3cold [ 0.570659] pci 0000:00:05.0: [8086:6f28] type 00 class 0x088000 PCIe Root Complex Integrated Endpoint [ 0.571296] pci 0000:00:05.1: [8086:6f29] type 00 class 0x088000 PCIe Root Complex Integrated Endpoint [ 0.571992] pci 0000:00:05.2: [8086:6f2a] type 00 class 0x088000 PCIe Root Complex Integrated Endpoint [ 0.572725] pci 0000:00:14.0: [8086:8c31] type 00 class 0x0c0330 conventional PCI endpoint [ 0.572889] pci 0000:00:14.0: BAR 0 [mem 0xfb600000-0xfb60ffff 64bit] [ 0.573363] pci 0000:00:14.0: PME# supported from D3hot D3cold [ 0.573721] pci 0000:00:16.0: [8086:8c3a] type 00 class 0x078000 conventional PCI endpoint [ 0.573889] pci 0000:00:16.0: BAR 0 [mem 0xfb617000-0xfb61700f 64bit] [ 0.574364] pci 0000:00:16.0: PME# supported from D0 D3hot D3cold [ 0.574677] pci 0000:00:16.1: [8086:8c3b] type 00 class 0x078000 conventional PCI endpoint [ 0.574889] pci 0000:00:16.1: BAR 0 [mem 0xfb616000-0xfb61600f 64bit] [ 0.575367] pci 0000:00:16.1: PME# supported from D0 D3hot D3cold [ 0.575738] pci 0000:00:1a.0: [8086:8c2d] type 00 class 0x0c0320 conventional PCI endpoint [ 0.575868] pci 0000:00:1a.0: BAR 0 [mem 0xfb614000-0xfb6143ff] [ 0.576416] pci 0000:00:1a.0: PME# supported from D0 D3hot D3cold [ 0.576750] pci 0000:00:1c.0: [8086:8c10] type 01 class 0x060400 PCIe Root Port [ 0.576955] pci 0000:00:1c.0: PCI bridge to [bus 07] [ 0.577086] pci 0000:00:1c.0: bridge window [io 0xe000-0xefff] [ 0.577216] pci 0000:00:1c.0: bridge window [mem 0xfb300000-0xfb3fffff] [ 0.577647] pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold [ 0.577854] pci 0000:00:1c.0: Enabling MPC IRBNCE [ 0.577979] pci 0000:00:1c.0: Intel PCH root port ACS workaround enabled [ 0.578285] pci 0000:00:1c.1: [8086:8c12] type 01 class 0x060400 PCIe Root Port [ 0.578598] pci 0000:00:1c.1: PCI bridge to [bus 08] [ 0.578729] pci 0000:00:1c.1: bridge window [io 0xd000-0xdfff] [ 0.578798] pci 0000:00:1c.1: bridge window [mem 0xfb200000-0xfb2fffff] [ 0.579241] pci 0000:00:1c.1: PME# supported from D0 D3hot D3cold [ 0.579441] pci 0000:00:1c.1: Enabling MPC IRBNCE [ 0.579564] pci 0000:00:1c.1: Intel PCH root port ACS workaround enabled [ 0.579878] pci 0000:00:1c.3: [8086:8c16] type 01 class 0x060400 PCIe Root Port [ 0.580193] pci 0000:00:1c.3: PCI bridge to [bus 09-0a] [ 0.580332] pci 0000:00:1c.3: bridge window [io 0xc000-0xcfff] [ 0.580461] pci 0000:00:1c.3: bridge window [mem 0xfa000000-0xfb0fffff] [ 0.580899] pci 0000:00:1c.3: PME# supported from D0 D3hot D3cold [ 0.581099] pci 0000:00:1c.3: Enabling MPC IRBNCE [ 0.581222] pci 0000:00:1c.3: Intel PCH root port ACS workaround enabled [ 0.581524] pci 0000:00:1c.4: [8086:8c18] type 01 class 0x060400 PCIe Root Port [ 0.581854] pci 0000:00:1c.4: PCI bridge to [bus 0b] [ 0.581985] pci 0000:00:1c.4: bridge window [io 0xb000-0xbfff] [ 0.582115] pci 0000:00:1c.4: bridge window [mem 0xfb100000-0xfb1fffff] [ 0.582550] pci 0000:00:1c.4: PME# supported from D0 D3hot D3cold [ 0.582751] pci 0000:00:1c.4: Enabling MPC IRBNCE [ 0.582796] pci 0000:00:1c.4: Intel PCH root port ACS workaround enabled [ 0.583134] pci 0000:00:1d.0: [8086:8c26] type 00 class 0x0c0320 conventional PCI endpoint [ 0.583363] pci 0000:00:1d.0: BAR 0 [mem 0xfb613000-0xfb6133ff] [ 0.583912] pci 0000:00:1d.0: PME# supported from D0 D3hot D3cold [ 0.584247] pci 0000:00:1f.0: [8086:8c54] type 00 class 0x060100 conventional PCI endpoint [ 0.585062] pci 0000:00:1f.2: [8086:8c02] type 00 class 0x010601 conventional PCI endpoint [ 0.585288] pci 0000:00:1f.2: BAR 0 [io 0xf070-0xf077] [ 0.585448] pci 0000:00:1f.2: BAR 1 [io 0xf060-0xf063] [ 0.585608] pci 0000:00:1f.2: BAR 2 [io 0xf050-0xf057] [ 0.585774] pci 0000:00:1f.2: BAR 3 [io 0xf040-0xf043] [ 0.585831] pci 0000:00:1f.2: BAR 4 [io 0xf020-0xf03f] [ 0.585990] pci 0000:00:1f.2: BAR 5 [mem 0xfb612000-0xfb6127ff] [ 0.586309] pci 0000:00:1f.2: PME# supported from D3hot [ 0.586602] pci 0000:00:1f.3: [8086:8c22] type 00 class 0x0c0500 conventional PCI endpoint [ 0.586854] pci 0000:00:1f.3: BAR 0 [mem 0xfb611000-0xfb6110ff 64bit] [ 0.587110] pci 0000:00:1f.3: BAR 4 [io 0xf000-0xf01f] [ 0.587503] pci 0000:00:1f.6: [8086:8c24] type 00 class 0x118000 conventional PCI endpoint [ 0.587754] pci 0000:00:1f.6: BAR 0 [mem 0xfb610000-0xfb610fff 64bit] [ 0.588431] pci 0000:00:01.0: PCI bridge to [bus 01] [ 0.588741] pci 0000:00:01.1: PCI bridge to [bus 02] [ 0.589027] pci 0000:03:00.0: [8086:6f50] type 00 class 0x088000 PCIe Endpoint [ 0.589270] pci 0000:03:00.0: BAR 0 [mem 0xfb506000-0xfb507fff 64bit] [ 0.590063] pci 0000:03:00.1: [8086:6f51] type 00 class 0x088000 PCIe Endpoint [ 0.590307] pci 0000:03:00.1: BAR 0 [mem 0xfb504000-0xfb505fff 64bit] [ 0.591051] pci 0000:03:00.2: [8086:6f52] type 00 class 0x088000 PCIe Endpoint [ 0.591300] pci 0000:03:00.2: BAR 0 [mem 0xfb502000-0xfb503fff 64bit] [ 0.592042] pci 0000:03:00.3: [8086:6f53] type 00 class 0x088000 PCIe Endpoint [ 0.592285] pci 0000:03:00.3: BAR 0 [mem 0xfb500000-0xfb501fff 64bit] [ 0.593045] pci 0000:00:02.0: PCI bridge to [bus 03] [ 0.593425] pci 0000:04:00.0: [8086:15ac] type 00 class 0x020000 PCIe Endpoint [ 0.593668] pci 0000:04:00.0: BAR 0 [mem 0xfbc00000-0xfbdfffff 64bit pref] [ 0.593934] pci 0000:04:00.0: BAR 4 [mem 0xfbe04000-0xfbe07fff 64bit pref] [ 0.594097] pci 0000:04:00.0: ROM [mem 0xfb480000-0xfb4fffff pref] [ 0.594458] pci 0000:04:00.0: PME# supported from D0 D3hot D3cold [ 0.594685] pci 0000:04:00.0: VF BAR 0 [mem 0x00000000-0x00003fff 64bit] [ 0.594787] pci 0000:04:00.0: VF BAR 0 [mem 0x00000000-0x000fffff 64bit]: contains BAR 0 for 64 VFs [ 0.594992] pci 0000:04:00.0: VF BAR 3 [mem 0x00000000-0x00003fff 64bit] [ 0.595133] pci 0000:04:00.0: VF BAR 3 [mem 0x00000000-0x000fffff 64bit]: contains BAR 3 for 64 VFs [ 0.595732] pci 0000:04:00.1: [8086:15ac] type 00 class 0x020000 PCIe Endpoint [ 0.595885] pci 0000:04:00.1: BAR 0 [mem 0xfba00000-0xfbbfffff 64bit pref] [ 0.596153] pci 0000:04:00.1: BAR 4 [mem 0xfbe00000-0xfbe03fff 64bit pref] [ 0.596320] pci 0000:04:00.1: ROM [mem 0xfb400000-0xfb47ffff pref] [ 0.596678] pci 0000:04:00.1: PME# supported from D0 D3hot D3cold [ 0.596874] pci 0000:04:00.1: VF BAR 0 [mem 0x00000000-0x00003fff 64bit] [ 0.596996] pci 0000:04:00.1: VF BAR 0 [mem 0x00000000-0x000fffff 64bit]: contains BAR 0 for 64 VFs [ 0.597199] pci 0000:04:00.1: VF BAR 3 [mem 0x00000000-0x00003fff 64bit] [ 0.597319] pci 0000:04:00.1: VF BAR 3 [mem 0x00000000-0x000fffff 64bit]: contains BAR 3 for 64 VFs [ 0.597901] pci 0000:00:02.2: PCI bridge to [bus 04] [ 0.598982] pci 0000:00:03.0: PCI bridge to [bus 05] [ 0.599291] pci 0000:00:03.2: PCI bridge to [bus 06] [ 0.599676] pci 0000:07:00.0: working around ROM BAR overlap defect [ 0.599787] pci 0000:07:00.0: [8086:1533] type 00 class 0x020000 PCIe Endpoint [ 0.600025] pci 0000:07:00.0: BAR 0 [mem 0xfb300000-0xfb37ffff] [ 0.600251] pci 0000:07:00.0: BAR 2 [io 0xe000-0xe01f] [ 0.600418] pci 0000:07:00.0: BAR 3 [mem 0xfb380000-0xfb383fff] [ 0.600967] pci 0000:07:00.0: PME# supported from D0 D3hot D3cold [ 0.601446] pci 0000:00:1c.0: PCI bridge to [bus 07] [ 0.601852] pci 0000:08:00.0: working around ROM BAR overlap defect [ 0.601973] pci 0000:08:00.0: [8086:1533] type 00 class 0x020000 PCIe Endpoint [ 0.602209] pci 0000:08:00.0: BAR 0 [mem 0xfb200000-0xfb27ffff] [ 0.602427] pci 0000:08:00.0: BAR 2 [io 0xd000-0xd01f] [ 0.602594] pci 0000:08:00.0: BAR 3 [mem 0xfb280000-0xfb283fff] [ 0.603141] pci 0000:08:00.0: PME# supported from D0 D3hot D3cold [ 0.603618] pci 0000:00:1c.1: PCI bridge to [bus 08] [ 0.603994] pci 0000:09:00.0: [1a03:1150] type 01 class 0x060400 PCIe to PCI/PCI-X bridge [ 0.604329] pci 0000:09:00.0: PCI bridge to [bus 0a] [ 0.604473] pci 0000:09:00.0: bridge window [io 0xc000-0xcfff] [ 0.604604] pci 0000:09:00.0: bridge window [mem 0xfa000000-0xfb0fffff] [ 0.604849] pci 0000:09:00.0: enabling Extended Tags [ 0.605198] pci 0000:09:00.0: supports D1 D2 [ 0.605312] pci 0000:09:00.0: PME# supported from D0 D1 D2 D3hot D3cold [ 0.605685] pci 0000:00:1c.3: PCI bridge to [bus 09-0a] [ 0.605996] pci_bus 0000:0a: extended config space not accessible [ 0.606172] pci 0000:0a:00.0: [1a03:2000] type 00 class 0x030000 conventional PCI endpoint [ 0.606409] pci 0000:0a:00.0: BAR 0 [mem 0xfa000000-0xfaffffff] [ 0.606578] pci 0000:0a:00.0: BAR 1 [mem 0xfb000000-0xfb01ffff] [ 0.606749] pci 0000:0a:00.0: BAR 2 [io 0xc000-0xc07f] [ 0.607035] pci 0000:0a:00.0: Video device with shadowed ROM at [mem 0x000c0000-0x000dffff] [ 0.607332] pci 0000:0a:00.0: supports D1 D2 [ 0.607446] pci 0000:0a:00.0: PME# supported from D0 D1 D2 D3hot D3cold [ 0.607899] pci 0000:09:00.0: PCI bridge to [bus 0a] [ 0.608356] pci 0000:0b:00.0: [8086:1521] type 00 class 0x020000 PCIe Endpoint [ 0.608586] pci 0000:0b:00.0: BAR 0 [mem 0xfb160000-0xfb17ffff] [ 0.608795] pci 0000:0b:00.0: BAR 2 [io 0xb060-0xb07f] [ 0.608957] pci 0000:0b:00.0: BAR 3 [mem 0xfb18c000-0xfb18ffff] [ 0.609491] pci 0000:0b:00.0: PME# supported from D0 D3hot D3cold [ 0.609739] pci 0000:0b:00.0: VF BAR 0 [mem 0x00000000-0x00003fff 64bit pref] [ 0.609787] pci 0000:0b:00.0: VF BAR 0 [mem 0x00000000-0x0001ffff 64bit pref]: contains BAR 0 for 8 VFs [ 0.610005] pci 0000:0b:00.0: VF BAR 3 [mem 0x00000000-0x00003fff 64bit pref] [ 0.610129] pci 0000:0b:00.0: VF BAR 3 [mem 0x00000000-0x0001ffff 64bit pref]: contains BAR 3 for 8 VFs [ 0.610711] pci 0000:0b:00.1: [8086:1521] type 00 class 0x020000 PCIe Endpoint [ 0.610876] pci 0000:0b:00.1: BAR 0 [mem 0xfb140000-0xfb15ffff] [ 0.611088] pci 0000:0b:00.1: BAR 2 [io 0xb040-0xb05f] [ 0.611250] pci 0000:0b:00.1: BAR 3 [mem 0xfb188000-0xfb18bfff] [ 0.611779] pci 0000:0b:00.1: PME# supported from D0 D3hot D3cold [ 0.612012] pci 0000:0b:00.1: VF BAR 0 [mem 0x00000000-0x00003fff 64bit pref] [ 0.612136] pci 0000:0b:00.1: VF BAR 0 [mem 0x00000000-0x0001ffff 64bit pref]: contains BAR 0 for 8 VFs [ 0.612358] pci 0000:0b:00.1: VF BAR 3 [mem 0x00000000-0x00003fff 64bit pref] [ 0.612482] pci 0000:0b:00.1: VF BAR 3 [mem 0x00000000-0x0001ffff 64bit pref]: contains BAR 3 for 8 VFs [ 0.613024] pci 0000:0b:00.2: [8086:1521] type 00 class 0x020000 PCIe Endpoint [ 0.613254] pci 0000:0b:00.2: BAR 0 [mem 0xfb120000-0xfb13ffff] [ 0.613466] pci 0000:0b:00.2: BAR 2 [io 0xb020-0xb03f] [ 0.613635] pci 0000:0b:00.2: BAR 3 [mem 0xfb184000-0xfb187fff] [ 0.614166] pci 0000:0b:00.2: PME# supported from D0 D3hot D3cold [ 0.614399] pci 0000:0b:00.2: VF BAR 0 [mem 0x00000000-0x00003fff 64bit pref] [ 0.614523] pci 0000:0b:00.2: VF BAR 0 [mem 0x00000000-0x0001ffff 64bit pref]: contains BAR 0 for 8 VFs [ 0.614740] pci 0000:0b:00.2: VF BAR 3 [mem 0x00000000-0x00003fff 64bit pref] [ 0.614787] pci 0000:0b:00.2: VF BAR 3 [mem 0x00000000-0x0001ffff 64bit pref]: contains BAR 3 for 8 VFs [ 0.615327] pci 0000:0b:00.3: [8086:1521] type 00 class 0x020000 PCIe Endpoint [ 0.615558] pci 0000:0b:00.3: BAR 0 [mem 0xfb100000-0xfb11ffff] [ 0.615770] pci 0000:0b:00.3: BAR 2 [io 0xb000-0xb01f] [ 0.615834] pci 0000:0b:00.3: BAR 3 [mem 0xfb180000-0xfb183fff] [ 0.616377] pci 0000:0b:00.3: PME# supported from D0 D3hot D3cold [ 0.616610] pci 0000:0b:00.3: VF BAR 0 [mem 0x00000000-0x00003fff 64bit pref] [ 0.616734] pci 0000:0b:00.3: VF BAR 0 [mem 0x00000000-0x0001ffff 64bit pref]: contains BAR 0 for 8 VFs [ 0.616853] pci 0000:0b:00.3: VF BAR 3 [mem 0x00000000-0x00003fff 64bit pref] [ 0.616977] pci 0000:0b:00.3: VF BAR 3 [mem 0x00000000-0x0001ffff 64bit pref]: contains BAR 3 for 8 VFs [ 0.617599] pci 0000:00:1c.4: PCI bridge to [bus 0b] [ 0.617757] pci 0000:00:1c.4: bridge has subordinate 0b but max busn 0c [ 0.618222] pci_bus 0000:00: on NUMA node 0 [ 0.618321] xen: registering gsi 13 triggering 1 polarity 0 [ 0.619297] ACPI: PCI: Interrupt link LNKA configured for IRQ 11 [ 0.619493] ACPI: PCI: Interrupt link LNKB configured for IRQ 10 [ 0.619683] ACPI: PCI: Interrupt link LNKC configured for IRQ 5 [ 0.619860] ACPI: PCI: Interrupt link LNKD configured for IRQ 11 [ 0.620056] ACPI: PCI: Interrupt link LNKE configured for IRQ 0 [ 0.620196] ACPI: PCI: Interrupt link LNKE disabled [ 0.620379] ACPI: PCI: Interrupt link LNKF configured for IRQ 0 [ 0.620498] ACPI: PCI: Interrupt link LNKF disabled [ 0.620681] ACPI: PCI: Interrupt link LNKG configured for IRQ 0 [ 0.620787] ACPI: PCI: Interrupt link LNKG disabled [ 0.620973] ACPI: PCI: Interrupt link LNKH configured for IRQ 0 [ 0.621092] ACPI: PCI: Interrupt link LNKH disabled [ 0.621360] xen:balloon: Initialising balloon driver [ 0.621503] iommu: Default domain type: Translated [ 0.621790] iommu: DMA domain TLB invalidation policy: lazy mode [ 0.621975] SCSI subsystem initialized [ 0.622103] libata version 3.00 loaded. [ 0.622103] ACPI: bus type USB registered [ 0.622103] usbcore: registered new interface driver usbfs [ 0.622103] usbcore: registered new interface driver hub [ 0.622210] usbcore: registered new device driver usb [ 0.622792] pps_core: LinuxPPS API ver. 1 registered [ 0.622908] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti [ 0.623061] PTP clock support registered [ 0.623198] Advanced Linux Sound Architecture Driver Initialized. [ 0.623198] NetLabel: Initializing [ 0.623789] NetLabel: domain hash size = 128 [ 0.623904] NetLabel: protocols = UNLABELED CIPSOv4 CALIPSO [ 0.624066] NetLabel: unlabeled traffic allowed by default [ 0.624209] PCI: Using ACPI for IRQ routing [ 0.662659] PCI: pci_cache_line_size set to 64 bytes [ 0.663470] e820: reserve RAM buffer [mem 0x0009a000-0x0009ffff] [ 0.663473] e820: reserve RAM buffer [mem 0x20066000-0x23ffffff] [ 0.663503] pci 0000:0a:00.0: vgaarb: setting as boot VGA device [ 0.663503] pci 0000:0a:00.0: vgaarb: bridge control possible [ 0.663503] pci 0000:0a:00.0: vgaarb: VGA device added: decodes=io+mem,owns=io+mem,locks=none [ 0.663789] vgaarb: loaded [ 0.664218] clocksource: Switched to clocksource tsc-early [ 0.664692] VFS: Disk quotas dquot_6.6.0 [ 0.664692] VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes) [ 0.664692] hugetlbfs: disabling because there are no supported hugepage sizes [ 0.664779] pnp: PnP ACPI init [ 0.665227] xen: registering gsi 8 triggering 1 polarity 0 [ 0.665416] system 00:01: [io 0x0500-0x057f] has been reserved [ 0.665416] system 00:01: [io 0x0400-0x047f] has been reserved [ 0.665416] system 00:01: [io 0x0580-0x059f] has been reserved [ 0.665812] system 00:01: [io 0x0600-0x061f] has been reserved [ 0.665945] system 00:01: [io 0x0880-0x0883] has been reserved [ 0.666092] system 00:01: [io 0x0800-0x081f] has been reserved [ 0.666212] system 00:01: [mem 0xfed1c000-0xfed3ffff] could not be reserved [ 0.666334] system 00:01: [mem 0xfed45000-0xfed8bfff] has been reserved [ 0.666456] system 00:01: [mem 0xff000000-0xffffffff] has been reserved [ 0.666577] system 00:01: [mem 0xfee00000-0xfeefffff] has been reserved [ 0.666698] system 00:01: [mem 0xfed12000-0xfed1200f] has been reserved [ 0.666839] system 00:01: [mem 0xfed12010-0xfed1201f] has been reserved [ 0.666977] system 00:01: [mem 0xfed1b000-0xfed1bfff] has been reserved [ 0.667379] system 00:02: [io 0x0a00-0x0a0f] has been reserved [ 0.667541] system 00:02: [io 0x0a10-0x0a1f] has been reserved [ 0.667660] system 00:02: [io 0x0a20-0x0a2f] has been reserved [ 0.667779] system 00:02: [io 0x0a30-0x0a3f] has been reserved [ 0.667927] system 00:02: [io 0x0a40-0x0a4f] has been reserved [ 0.668337] xen: registering gsi 4 triggering 1 polarity 0 [ 0.668342] Already setup the GSI :4 [ 0.668454] pnp 00:03: [dma 0 disabled] [ 0.668761] xen: registering gsi 3 triggering 1 polarity 0 [ 0.668775] pnp 00:04: [dma 0 disabled] [ 0.669369] pnp: PnP ACPI: found 5 devices [ 0.701042] PM-Timer failed consistency check (0xffffff) - aborting. [ 0.701251] NET: Registered PF_INET protocol family [ 0.701408] IP idents hash table entries: 8192 (order: 4, 65536 bytes, linear) [ 0.701762] tcp_listen_portaddr_hash hash table entries: 256 (order: 0, 4096 bytes, linear) [ 0.701941] Table-perturb hash table entries: 65536 (order: 6, 262144 bytes, linear) [ 0.702129] TCP established hash table entries: 4096 (order: 3, 32768 bytes, linear) [ 0.702281] TCP bind hash table entries: 4096 (order: 5, 131072 bytes, linear) [ 0.702453] TCP: Hash tables configured (established 4096 bind 4096) [ 0.702596] UDP hash table entries: 256 (order: 1, 8192 bytes, linear) [ 0.702720] UDP-Lite hash table entries: 256 (order: 1, 8192 bytes, linear) [ 0.702900] NET: Registered PF_UNIX/PF_LOCAL protocol family [ 0.703223] RPC: Registered named UNIX socket transport module. [ 0.703344] RPC: Registered udp transport module. [ 0.703463] RPC: Registered tcp transport module. [ 0.703591] RPC: Registered tcp-with-tls transport module. [ 0.703707] RPC: Registered tcp NFSv4.1 backchannel transport module. [ 0.704322] pci 0000:00:1c.4: bridge window [mem 0x00100000-0x000fffff 64bit pref] to [bus 0b] add_size 100000 add_align 100000 [ 0.704496] pci 0000:00:1c.4: bridge window [mem 0x90000000-0x900fffff 64bit pref]: assigned [ 0.704647] pci 0000:00:01.0: PCI bridge to [bus 01] [ 0.704844] pci 0000:00:01.1: PCI bridge to [bus 02] [ 0.705055] pci 0000:00:02.0: PCI bridge to [bus 03] [ 0.705192] pci 0000:00:02.0: bridge window [mem 0xfb500000-0xfb5fffff] [ 0.705357] pci 0000:04:00.0: VF BAR 0 [mem size 0x00100000 64bit]: can't assign; no space [ 0.706624] pci 0000:04:00.0: VF BAR 0 [mem size 0x00100000 64bit]: failed to assign [ 0.706774] pci 0000:04:00.0: VF BAR 3 [mem size 0x00100000 64bit]: can't assign; no space [ 0.706940] pci 0000:04:00.0: VF BAR 3 [mem size 0x00100000 64bit]: failed to assign [ 0.707090] pci 0000:04:00.1: VF BAR 0 [mem size 0x00100000 64bit]: can't assign; no space [ 0.707237] pci 0000:04:00.1: VF BAR 0 [mem size 0x00100000 64bit]: failed to assign [ 0.707383] pci 0000:04:00.1: VF BAR 3 [mem size 0x00100000 64bit]: can't assign; no space [ 0.707530] pci 0000:04:00.1: VF BAR 3 [mem size 0x00100000 64bit]: failed to assign [ 0.707683] pci 0000:04:00.0: VF BAR 0 [mem size 0x00100000 64bit]: can't assign; no space [ 0.707847] pci 0000:04:00.0: VF BAR 0 [mem size 0x00100000 64bit]: failed to assign [ 0.707994] pci 0000:04:00.0: VF BAR 3 [mem size 0x00100000 64bit]: can't assign; no space [ 0.708141] pci 0000:04:00.0: VF BAR 3 [mem size 0x00100000 64bit]: failed to assign [ 0.708288] pci 0000:04:00.1: VF BAR 0 [mem size 0x00100000 64bit]: can't assign; no space [ 0.708435] pci 0000:04:00.1: VF BAR 0 [mem size 0x00100000 64bit]: failed to assign [ 0.708581] pci 0000:04:00.1: VF BAR 3 [mem size 0x00100000 64bit]: can't assign; no space [ 0.708728] pci 0000:04:00.1: VF BAR 3 [mem size 0x00100000 64bit]: failed to assign [ 0.708913] pci 0000:00:02.2: PCI bridge to [bus 04] [ 0.709059] pci 0000:00:02.2: bridge window [mem 0xfb400000-0xfb4fffff] [ 0.709194] pci 0000:00:02.2: bridge window [mem 0xfba00000-0xfbefffff 64bit pref] [ 0.709367] pci 0000:00:03.0: PCI bridge to [bus 05] [ 0.709543] pci 0000:00:03.2: PCI bridge to [bus 06] [ 0.709719] pci 0000:00:1c.0: PCI bridge to [bus 07] [ 0.709865] pci 0000:00:1c.0: bridge window [io 0xe000-0xefff] [ 0.710013] pci 0000:00:1c.0: bridge window [mem 0xfb300000-0xfb3fffff] [ 0.710176] pci 0000:00:1c.1: PCI bridge to [bus 08] [ 0.710297] pci 0000:00:1c.1: bridge window [io 0xd000-0xdfff] [ 0.710443] pci 0000:00:1c.1: bridge window [mem 0xfb200000-0xfb2fffff] [ 0.710607] pci 0000:09:00.0: PCI bridge to [bus 0a] [ 0.710728] pci 0000:09:00.0: bridge window [io 0xc000-0xcfff] [ 0.710897] pci 0000:09:00.0: bridge window [mem 0xfa000000-0xfb0fffff] [ 0.711067] pci 0000:00:1c.3: PCI bridge to [bus 09-0a] [ 0.711189] pci 0000:00:1c.3: bridge window [io 0xc000-0xcfff] [ 0.711329] pci 0000:00:1c.3: bridge window [mem 0xfa000000-0xfb0fffff] [ 0.711497] pci 0000:0b:00.0: VF BAR 0 [mem 0x90000000-0x9001ffff 64bit pref]: assigned [ 0.711655] pci 0000:0b:00.0: VF BAR 3 [mem 0x90020000-0x9003ffff 64bit pref]: assigned [ 0.711830] pci 0000:0b:00.1: VF BAR 0 [mem 0x90040000-0x9005ffff 64bit pref]: assigned [ 0.712008] pci 0000:0b:00.1: VF BAR 3 [mem 0x90060000-0x9007ffff 64bit pref]: assigned [ 0.712164] pci 0000:0b:00.2: VF BAR 0 [mem 0x90080000-0x9009ffff 64bit pref]: assigned [ 0.712318] pci 0000:0b:00.2: VF BAR 3 [mem 0x900a0000-0x900bffff 64bit pref]: assigned [ 0.712472] pci 0000:0b:00.3: VF BAR 0 [mem 0x900c0000-0x900dffff 64bit pref]: assigned [ 0.712626] pci 0000:0b:00.3: VF BAR 3 [mem 0x900e0000-0x900fffff 64bit pref]: assigned [ 0.712795] pci 0000:00:1c.4: PCI bridge to [bus 0b] [ 0.712928] pci 0000:00:1c.4: bridge window [io 0xb000-0xbfff] [ 0.713071] pci 0000:00:1c.4: bridge window [mem 0xfb100000-0xfb1fffff] [ 0.713213] pci 0000:00:1c.4: bridge window [mem 0x90000000-0x900fffff 64bit pref] [ 0.713388] pci_bus 0000:00: Some PCI device resources are unassigned, try booting with pci=realloc [ 0.713539] pci_bus 0000:00: resource 4 [io 0x0000-0x0cf7 window] [ 0.713659] pci_bus 0000:00: resource 5 [io 0x1000-0xffff window] [ 0.713779] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff window] [ 0.713925] pci_bus 0000:00: resource 7 [mem 0x90000000-0xfbffbfff window] [ 0.714049] pci_bus 0000:03: resource 1 [mem 0xfb500000-0xfb5fffff] [ 0.714169] pci_bus 0000:04: resource 1 [mem 0xfb400000-0xfb4fffff] [ 0.714289] pci_bus 0000:04: resource 2 [mem 0xfba00000-0xfbefffff 64bit pref] [ 0.714434] pci_bus 0000:07: resource 0 [io 0xe000-0xefff] [ 0.714551] pci_bus 0000:07: resource 1 [mem 0xfb300000-0xfb3fffff] [ 0.714704] pci_bus 0000:08: resource 0 [io 0xd000-0xdfff] [ 0.714837] pci_bus 0000:08: resource 1 [mem 0xfb200000-0xfb2fffff] [ 0.714958] pci_bus 0000:09: resource 0 [io 0xc000-0xcfff] [ 0.715075] pci_bus 0000:09: resource 1 [mem 0xfa000000-0xfb0fffff] [ 0.715195] pci_bus 0000:0a: resource 0 [io 0xc000-0xcfff] [ 0.715311] pci_bus 0000:0a: resource 1 [mem 0xfa000000-0xfb0fffff] [ 0.715431] pci_bus 0000:0b: resource 0 [io 0xb000-0xbfff] [ 0.715548] pci_bus 0000:0b: resource 1 [mem 0xfb100000-0xfb1fffff] [ 0.715668] pci_bus 0000:0b: resource 2 [mem 0x90000000-0x900fffff 64bit pref] [ 0.716250] pci 0000:00:05.0: disabled boot interrupts on device [8086:6f28] [ 0.716467] xen: registering gsi 19 triggering 0 polarity 1 [ 0.716501] xen: --> pirq=19 -> irq=19 (gsi=19) [ 0.725340] xen: registering gsi 18 triggering 0 polarity 1 [ 0.725367] xen: --> pirq=18 -> irq=18 (gsi=18) [ 0.740995] pci 0000:00:1a.0: quirk_usb_early_handoff+0x0/0x7c0 took 15336 usecs [ 0.741243] xen: registering gsi 18 triggering 0 polarity 1 [ 0.741250] Already setup the GSI :18 [ 0.756091] pci 0000:00:1d.0: quirk_usb_early_handoff+0x0/0x7c0 took 14551 usecs [ 0.756309] pci 0000:04:00.0: CLS mismatch (64 != 32), using 64 bytes [ 0.756486] PCI-DMA: Using software bounce buffering for IO (SWIOTLB) [ 0.756563] Unpacking initramfs... [ 0.756608] software IO TLB: mapped [mem 0x000000001b180000-0x000000001f180000] (64MB) [ 0.756984] kvm_intel: VMX not supported by CPU 1 [ 0.757102] kvm_amd: CPU 1 isn't AMD or Hygon [ 0.757218] clocksource: tsc: mask: 0xffffffffffffffff max_cycles: 0x1fb63109b96, max_idle_ns: 440795265316 ns [ 0.757461] clocksource: Switched to clocksource tsc [ 0.768003] Initialise system trusted keyrings [ 0.768319] workingset: timestamp_bits=62 max_order=17 bucket_order=0 [ 0.768727] NFS: Registering the id_resolver key type [ 0.768869] Key type id_resolver registered [ 0.768982] Key type id_legacy registered [ 0.769240] 9p: Installing v9fs 9p2000 file system support [ 0.787066] Key type asymmetric registered [ 0.787225] Asymmetric key parser 'x509' registered [ 0.787364] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 251) [ 0.787522] io scheduler mq-deadline registered [ 0.787637] io scheduler kyber registered [ 0.789412] xen: registering gsi 16 triggering 0 polarity 1 [ 0.789449] xen: --> pirq=16 -> irq=16 (gsi=16) [ 0.789880] xen: registering gsi 16 triggering 0 polarity 1 [ 0.789891] Already setup the GSI :16 [ 0.790379] xen: registering gsi 16 triggering 0 polarity 1 [ 0.790385] Already setup the GSI :16 [ 0.790708] xen: registering gsi 16 triggering 0 polarity 1 [ 0.790712] Already setup the GSI :16 [ 0.791050] xen: registering gsi 16 triggering 0 polarity 1 [ 0.791055] Already setup the GSI :16 [ 0.791559] xen: registering gsi 16 triggering 0 polarity 1 [ 0.791564] Already setup the GSI :16 [ 0.792055] xen: registering gsi 16 triggering 0 polarity 1 [ 0.792061] Already setup the GSI :16 [ 0.792511] xen: registering gsi 17 triggering 0 polarity 1 [ 0.792530] xen: --> pirq=17 -> irq=17 (gsi=17) [ 0.792915] xen: registering gsi 19 triggering 0 polarity 1 [ 0.792920] Already setup the GSI :19 [ 0.793374] xen: registering gsi 16 triggering 0 polarity 1 [ 0.793379] Already setup the GSI :16 [ 0.794055] input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input0 [ 0.794239] ACPI: button: Power Button [PWRB] [ 0.794384] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input1 [ 0.794661] ACPI: button: Power Button [PWRF] [ 0.794935] Monitor-Mwait will be used to enter C-1 state [ 0.794970] Monitor-Mwait will be used to enter C-2 state [ 0.794985] ACPI: \_SB_.SCK0.CP00: Found 2 idle states [ 0.795311] ACPI: \_SB_.SCK0.CP01: Found 2 idle states [ 0.795734] ACPI: \_SB_.SCK0.CP02: Found 2 idle states [ 0.796217] ACPI: \_SB_.SCK0.CP03: Found 2 idle states [ 0.796762] ACPI: \_SB_.SCK0.CP04: Found 2 idle states [ 0.797318] ACPI: \_SB_.SCK0.CP05: Found 2 idle states [ 0.797786] ACPI: \_SB_.SCK0.CP06: Found 2 idle states [ 0.798342] ACPI: \_SB_.SCK0.CP07: Found 2 idle states [ 0.799185] xen:xen_evtchn: Event-channel device installed [ 0.799400] xen_pciback: backend is vpci [ 0.800163] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled [ 0.800561] 00:04: ttyS1 at I/O 0x2f8 (irq = 3, base_baud = 115200) is a 16550A [ 0.801396] hpet_acpi_add: no address or irqs in _CRS [ 0.801616] Non-volatile memory driver v1.3 [ 0.804046] loop: module loaded [ 0.810318] mei_me 0000:00:16.0: Device doesn't have valid ME Interface [ 0.810332] ahci 0000:00:1f.2: version 3.0 [ 0.810544] xen: registering gsi 16 triggering 0 polarity 1 [ 0.810555] Already setup the GSI :16 [ 0.810923] ahci 0000:00:1f.2: AHCI vers 0001.0300, 32 command slots, 6 Gbps, SATA mode [ 0.811075] ahci 0000:00:1f.2: 6/6 ports implemented (port mask 0x3f) [ 0.811196] ahci 0000:00:1f.2: flags: 64bit ncq led clo pio ems apst [ 0.826503] scsi host0: ahci [ 0.826833] scsi host1: ahci [ 0.827157] scsi host2: ahci [ 0.827459] scsi host3: ahci [ 0.827760] scsi host4: ahci [ 0.828076] scsi host5: ahci [ 0.828223] ata1: SATA max UDMA/133 abar m2048@0xfb612000 port 0xfb612100 irq 83 lpm-pol 0 [ 0.828372] ata2: SATA max UDMA/133 abar m2048@0xfb612000 port 0xfb612180 irq 83 lpm-pol 0 [ 0.828520] ata3: SATA max UDMA/133 abar m2048@0xfb612000 port 0xfb612200 irq 83 lpm-pol 0 [ 0.828667] ata4: SATA max UDMA/133 abar m2048@0xfb612000 port 0xfb612280 irq 83 lpm-pol 0 [ 0.828818] ata5: SATA max UDMA/133 abar m2048@0xfb612000 port 0xfb612300 irq 83 lpm-pol 0 [ 0.828977] ata6: SATA max UDMA/133 abar m2048@0xfb612000 port 0xfb612380 irq 83 lpm-pol 0 [ 0.829454] tun: Universal TUN/TAP device driver, 1.6 [ 0.829723] e100: Intel(R) PRO/100 Network Driver [ 0.829862] e100: Copyright(c) 1999-2006 Intel Corporation [ 0.830022] sky2: driver version 1.30 [ 0.830237] xen_netfront: Initialising Xen virtual ethernet driver [ 0.830661] xen: registering gsi 19 triggering 0 polarity 1 [ 0.830674] Already setup the GSI :19 [ 0.830713] xen: registering gsi 18 triggering 0 polarity 1 [ 0.830822] Already setup the GSI :18 [ 0.830941] xen: registering gsi 18 triggering 0 polarity 1 [ 0.830984] xhci_hcd 0000:00:14.0: xHCI Host Controller [ 0.831069] xhci_hcd 0000:00:14.0: new USB bus registered, assigned bus number 1 [ 0.832202] xhci_hcd 0000:00:14.0: hcc params 0x200077c1 hci version 0x100 quirks 0x0000000000009810 [ 0.832221] Already setup the GSI :18 [ 0.832780] xhci_hcd 0000:00:14.0: xHCI Host Controller [ 0.832796] ehci-pci 0000:00:1a.0: EHCI Host Controller [ 0.833048] xhci_hcd 0000:00:14.0: new USB bus registered, assigned bus number 2 [ 0.833154] ehci-pci 0000:00:1a.0: new USB bus registered, assigned bus number 3 [ 0.833240] xhci_hcd 0000:00:14.0: Host supports USB 3.0 SuperSpeed [ 0.833281] ehci-pci 0000:00:1a.0: debug port 2 [ 0.833600] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 6.10 [ 0.833783] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 0.833946] usb usb1: Product: xHCI Host Controller [ 0.834064] usb usb1: Manufacturer: Linux 6.10.0-rc3+ xhci-hcd [ 0.834185] usb usb1: SerialNumber: 0000:00:14.0 [ 0.834580] hub 1-0:1.0: USB hub found [ 0.834743] hub 1-0:1.0: 8 ports detected [ 0.836169] usb usb2: New USB device found, idVendor=1d6b, idProduct=0003, bcdDevice= 6.10 [ 0.836326] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 0.836473] usb usb2: Product: xHCI Host Controller [ 0.836590] usb usb2: Manufacturer: Linux 6.10.0-rc3+ xhci-hcd [ 0.836710] usb usb2: SerialNumber: 0000:00:14.0 [ 0.837064] hub 2-0:1.0: USB hub found [ 0.837213] hub 2-0:1.0: 6 ports detected [ 0.837611] ehci-pci 0000:00:1a.0: irq 18, io mem 0xfb614000 [ 0.838442] usbcore: registered new interface driver usblp [ 0.838575] usbcore: registered new interface driver usb-storage [ 0.838720] i8042: PNP: No PS/2 controller found. [ 0.839058] rtc_cmos 00:00: RTC can wake from S4 [ 0.839726] rtc_cmos 00:00: registered as rtc0 [ 0.839906] rtc_cmos 00:00: alarms up to one month, y3k, 114 bytes nvram [ 0.840091] device-mapper: uevent: version 1.0.3 [ 0.840275] device-mapper: ioctl: 4.48.0-ioctl (2023-03-01) initialised: dm-devel@lists.linux.dev [ 0.840302] xen: registering gsi 18 triggering 0 polarity 1 [ 0.840433] intel_pstate: CPU model not supported [ 0.840436] Already setup the GSI :18 [ 0.840454] hid: raw HID events driver (C) Jiri Kosina [ 0.840590] i801_smbus 0000:00:1f.3: SPD Write Disable is set [ 0.840799] usbcore: registered new interface driver usbhid [ 0.840926] i801_smbus 0000:00:1f.3: SMBus using PCI interrupt [ 0.841026] usbhid: USB HID core driver [ 0.841715] Initializing XFRM netlink socket [ 0.841887] NET: Registered PF_INET6 protocol family [ 0.842338] Segment Routing with IPv6 [ 0.842466] In-situ OAM (IOAM) with IPv6 [ 0.842643] sit: IPv6, IPv4 and MPLS over IPv4 tunneling driver [ 0.842921] NET: Registered PF_PACKET protocol family [ 0.843066] 9pnet: Installing 9P2000 support [ 0.843196] Key type dns_resolver registered [ 0.843898] ehci-pci 0000:00:1a.0: USB 2.0 started, EHCI 1.00 [ 0.844122] IPI shorthand broadcast: enabled [ 0.844253] usb usb3: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 6.10 [ 0.844407] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 0.844553] usb usb3: Product: EHCI Host Controller [ 0.844669] usb usb3: Manufacturer: Linux 6.10.0-rc3+ ehci_hcd [ 0.844787] usb usb3: SerialNumber: 0000:00:1a.0 [ 0.845168] hub 3-0:1.0: USB hub found [ 0.845314] hub 3-0:1.0: 2 ports detected [ 0.845753] ehci-pci 0000:00:1d.0: EHCI Host Controller [ 0.846018] ehci-pci 0000:00:1d.0: new USB bus registered, assigned bus number 4 [ 0.846201] ehci-pci 0000:00:1d.0: debug port 2 [ 0.847394] sched_clock: Marking stable (806007463, 40843886)->(1687345924, -840494575) [ 0.847981] Timer migration: 1 hierarchy levels; 8 children per group; 1 crossnode level [ 0.850315] ehci-pci 0000:00:1d.0: irq 18, io mem 0xfb613000 [ 0.850490] registered taskstats version 1 [ 0.850612] Loading compiled-in X.509 certificates [ 0.852316] PM: Magic number: 12:949:889 [ 0.852486] ahci 0000:00:1f.2: hash matches [ 0.852669] printk: legacy console [netcon0] enabled [ 0.852786] netconsole: network logging started [ 0.853177] cfg80211: Loading compiled-in X.509 certificates for regulatory database [ 0.856922] ehci-pci 0000:00:1d.0: USB 2.0 started, EHCI 1.00 [ 0.857283] usb usb4: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 6.10 [ 0.857438] usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 0.857584] usb usb4: Product: EHCI Host Controller [ 0.857700] usb usb4: Manufacturer: Linux 6.10.0-rc3+ ehci_hcd [ 0.857819] usb usb4: SerialNumber: 0000:00:1d.0 [ 0.858156] hub 4-0:1.0: USB hub found [ 0.858306] hub 4-0:1.0: 2 ports detected [ 0.870235] Freeing initrd memory: 20116K [ 0.882120] Loaded X.509 cert 'sforshee: 00b28ddf47aef9cea7' [ 0.882463] Loaded X.509 cert 'wens: 61c038651aabdcf94bd0ac7ff06c7248db18c600' [ 0.883156] cfg80211: loaded regulatory.db is malformed or signature is missing/invalid [ 0.883343] ALSA device list: [ 0.883455] No soundcards found. [ 1.075946] usb 1-3: new high-speed USB device number 2 using xhci_hcd [ 1.083942] usb 3-1: new high-speed USB device number 2 using ehci-pci [ 1.100031] usb 4-1: new high-speed USB device number 2 using ehci-pci [ 1.136932] ata4: SATA link down (SStatus 0 SControl 300) [ 1.137143] ata1: SATA link down (SStatus 0 SControl 300) [ 1.137287] ata3: SATA link up 6.0 Gbps (SStatus 133 SControl 300) [ 1.137451] ata5: SATA link down (SStatus 0 SControl 300) [ 1.137592] ata2: SATA link down (SStatus 0 SControl 300) [ 1.138519] ata3.00: ATA-10: HGST HUS722T1TALA604, RAGNWA05, max UDMA/133 [ 1.145487] ata6: SATA link down (SStatus 0 SControl 300) [ 1.203600] usb 1-3: New USB device found, idVendor=05e3, idProduct=0610, bcdDevice=32.98 [ 1.203758] usb 1-3: New USB device strings: Mfr=0, Product=1, SerialNumber=0 [ 1.203902] usb 1-3: Product: USB2.0 Hub [ 1.204776] hub 1-3:1.0: USB hub found [ 1.205296] hub 1-3:1.0: 4 ports detected [ 1.212423] usb 3-1: New USB device found, idVendor=8087, idProduct=8008, bcdDevice= 0.05 [ 1.212580] usb 3-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0 [ 1.212952] hub 3-1:1.0: USB hub found [ 1.213172] hub 3-1:1.0: 4 ports detected [ 1.227170] ata3.00: 1953525168 sectors, multi 16: LBA48 NCQ (depth 32), AA [ 1.227302] ata3.00: Features: NCQ-sndrcv NCQ-prio [ 1.228477] usb 4-1: New USB device found, idVendor=8087, idProduct=8000, bcdDevice= 0.05 [ 1.228769] usb 4-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0 [ 1.229203] hub 4-1:1.0: USB hub found [ 1.229424] hub 4-1:1.0: 4 ports detected [ 1.254966] ata3.00: configured for UDMA/133 [ 1.255466] scsi 2:0:0:0: Direct-Access ATA HGST HUS722T1TAL WA05 PQ: 0 ANSI: 5 [ 1.256304] sd 2:0:0:0: Attached scsi generic sg0 type 0 [ 1.256395] sd 2:0:0:0: [sda] 1953525168 512-byte logical blocks: (1.00 TB/932 GiB) [ 1.256593] sd 2:0:0:0: [sda] Write Protect is off [ 1.256710] sd 2:0:0:0: [sda] Mode Sense: 00 3a 00 00 [ 1.256737] sd 2:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 1.256960] sd 2:0:0:0: [sda] Preferred minimum I/O size 512 bytes [ 1.276265] sda: sda1 sda2 < sda5 > [ 1.276688] sd 2:0:0:0: [sda] Attached SCSI removable disk [ 1.278587] Freeing unused kernel image (initmem) memory: 2680K [ 1.278729] Write protecting the kernel read-only data: 24576k [ 1.299163] Freeing unused kernel image (rodata/data gap) memory: 2028K [ 1.321890] usb 1-4: new high-speed USB device number 3 using xhci_hcd [ 1.448177] usb 1-4: New USB device found, idVendor=0557, idProduct=7000, bcdDevice= 0.00 [ 1.448332] usb 1-4: New USB device strings: Mfr=0, Product=0, SerialNumber=0 [ 1.449035] hub 1-4:1.0: USB hub found [ 1.449251] hub 1-4:1.0: 4 ports detected [ 1.741885] usb 1-4.1: new low-speed USB device number 4 using xhci_hcd [ 1.772459] x86/mm: Checked W+X mappings: passed, no W+X pages found. [ 1.772632] Run /init as init process [ 1.772748] with arguments: [ 1.772749] /init [ 1.772750] placeholder [ 1.772751] with environment: [ 1.772752] HOME=/ [ 1.772753] TERM=linux [ 1.848392] usb 1-4.1: New USB device found, idVendor=0557, idProduct=2419, bcdDevice= 1.00 [ 1.848552] usb 1-4.1: New USB device strings: Mfr=0, Product=0, SerialNumber=0 [ 1.854487] input: HID 0557:2419 as /devices/pci0000:00/0000:00:14.0/usb1/1-4/1-4.1/1-4.1:1.0/0003:0557:2419.0001/input/input2 [ 1.906295] hid-generic 0003:0557:2419.0001: input,hidraw0: USB HID v1.00 Keyboard [HID 0557:2419] on usb-0000:00:14.0-4.1/input0 [ 1.911393] input: HID 0557:2419 as /devices/pci0000:00/0000:00:14.0/usb1/1-4/1-4.1/1-4.1:1.1/0003:0557:2419.0002/input/input3 [ 1.911930] hid-generic 0003:0557:2419.0002: input,hidraw1: USB HID v1.00 Mouse [HID 0557:2419] on usb-0000:00:14.0-4.1/input1 [ 1.948939] usb 1-3.2: new high-speed USB device number 5 using xhci_hcd [ 2.026402] usb 1-3.2: New USB device found, idVendor=05e3, idProduct=0610, bcdDevice=32.98 [ 2.026561] usb 1-3.2: New USB device strings: Mfr=0, Product=1, SerialNumber=0 [ 2.026708] usb 1-3.2: Product: USB2.0 Hub [ 2.027573] hub 1-3.2:1.0: USB hub found [ 2.027991] hub 1-3.2:1.0: 4 ports detected [ 2.211827] ixgbe: Intel(R) 10 Gigabit PCI Express Network Driver [ 2.211995] ixgbe: Copyright (c) 1999-2016 Intel Corporation. [ 2.212435] ACPI Warning: \_SB.PCI0.BR2C._PRT: Return Package has no elements (empty) (20240322/nsprepkg-94) [ 2.212732] xen: registering gsi 16 triggering 0 polarity 1 [ 2.212746] Already setup the GSI :16 [ 2.215656] igb: Intel(R) Gigabit Ethernet Network Driver [ 2.215802] igb: Copyright (c) 2007-2014 Intel Corporation. [ 2.216047] xen: registering gsi 16 triggering 0 polarity 1 [ 2.216056] Already setup the GSI :16 [ 2.242453] pps pps0: new PPS source ptp0 [ 2.242642] igb 0000:07:00.0: added PHC on eth0 [ 2.242776] igb 0000:07:00.0: Intel(R) Gigabit Ethernet Network Connection [ 2.242916] igb 0000:07:00.0: eth0: (PCIe:2.5Gb/s:Width x1) 0c:c4:7a:9f:87:be [ 2.243084] igb 0000:07:00.0: eth0: PBA No: 010C00-000 [ 2.243233] igb 0000:07:00.0: Using MSI-X interrupts. 4 rx queue(s), 4 tx queue(s) [ 2.243471] xen: registering gsi 17 triggering 0 polarity 1 [ 2.243480] Already setup the GSI :17 [ 2.272200] pps pps1: new PPS source ptp1 [ 2.272418] igb 0000:08:00.0: added PHC on eth1 [ 2.272554] igb 0000:08:00.0: Intel(R) Gigabit Ethernet Network Connection [ 2.272676] igb 0000:08:00.0: eth1: (PCIe:2.5Gb/s:Width x1) 0c:c4:7a:9f:87:bf [ 2.272842] igb 0000:08:00.0: eth1: PBA No: 010000-000 [ 2.272975] igb 0000:08:00.0: Using MSI-X interrupts. 4 rx queue(s), 4 tx queue(s) [ 2.273205] xen: registering gsi 16 triggering 0 polarity 1 [ 2.273213] Already setup the GSI :16 [ 2.329033] igb 0000:0b:00.0: added PHC on eth2 [ 2.329180] igb 0000:0b:00.0: Intel(R) Gigabit Ethernet Network Connection [ 2.329302] igb 0000:0b:00.0: eth2: (PCIe:5.0Gb/s:Width x4) 0c:c4:7a:9f:87:c0 [ 2.329507] igb 0000:0b:00.0: eth2: PBA No: 010000-000 [ 2.329623] igb 0000:0b:00.0: Using MSI-X interrupts. 8 rx queue(s), 8 tx queue(s) [ 2.329869] xen: registering gsi 17 triggering 0 polarity 1 [ 2.329878] Already setup the GSI :17 [ 2.387373] igb 0000:0b:00.1: added PHC on eth3 [ 2.387515] igb 0000:0b:00.1: Intel(R) Gigabit Ethernet Network Connection [ 2.387637] igb 0000:0b:00.1: eth3: (PCIe:5.0Gb/s:Width x4) 0c:c4:7a:9f:87:c1 [ 2.387842] igb 0000:0b:00.1: eth3: PBA No: 010000-000 [ 2.387979] igb 0000:0b:00.1: Using MSI-X interrupts. 8 rx queue(s), 8 tx queue(s) [ 2.388227] xen: registering gsi 18 triggering 0 polarity 1 [ 2.388236] Already setup the GSI :18 [ 2.444146] igb 0000:0b:00.2: added PHC on eth4 [ 2.444327] igb 0000:0b:00.2: Intel(R) Gigabit Ethernet Network Connection [ 2.444449] igb 0000:0b:00.2: eth4: (PCIe:5.0Gb/s:Width x4) 0c:c4:7a:9f:87:c2 [ 2.444653] igb 0000:0b:00.2: eth4: PBA No: 010000-000 [ 2.444769] igb 0000:0b:00.2: Using MSI-X interrupts. 8 rx queue(s), 8 tx queue(s) [ 2.445027] xen: registering gsi 19 triggering 0 polarity 1 [ 2.445037] Already setup the GSI :19 [ 2.500486] igb 0000:0b:00.3: added PHC on eth5 [ 2.500632] igb 0000:0b:00.3: Intel(R) Gigabit Ethernet Network Connection [ 2.500754] igb 0000:0b:00.3: eth5: (PCIe:5.0Gb/s:Width x4) 0c:c4:7a:9f:87:c3 [ 2.500977] igb 0000:0b:00.3: eth5: PBA No: 010000-000 [ 2.501100] igb 0000:0b:00.3: Using MSI-X interrupts. 8 rx queue(s), 8 tx queue(s) [ 2.503584] igb 0000:0b:00.0 enx0cc47a9f87c0: renamed from eth2 [ 2.504350] igb 0000:07:00.0 enx0cc47a9f87be: renamed from eth0 [ 2.504734] igb 0000:08:00.0 enx0cc47a9f87bf: renamed from eth1 [ 2.505143] igb 0000:0b:00.1 enx0cc47a9f87c1: renamed from eth3 [ 2.505785] igb 0000:0b:00.2 enx0cc47a9f87c2: renamed from eth4 [ 2.506481] igb 0000:0b:00.3 enx0cc47a9f87c3: renamed from eth5 [ 2.946513] ixgbe 0000:04:00.0: Multiqueue Enabled: Rx Queue count = 8, Tx Queue count = 8 XDP Queue count = 0 [ 3.074256] ixgbe 0000:04:00.0: MAC: 5, PHY: 0, PBA No: 020B00-000 [ 3.074493] ixgbe 0000:04:00.0: 0c:c4:7a:9f:8f:b6 [ 3.367761] ixgbe 0000:04:00.0: Intel(R) 10 Gigabit Network Connection [ 3.368146] ACPI Warning: \_SB.PCI0.BR2C._PRT: Return Package has no elements (empty) (20240322/nsprepkg-94) [ 3.368363] xen: registering gsi 17 triggering 0 polarity 1 [ 3.368375] Already setup the GSI :17 [ 4.102092] ixgbe 0000:04:00.1: Multiqueue Enabled: Rx Queue count = 8, Tx Queue count = 8 XDP Queue count = 0 [ 4.235234] ixgbe 0000:04:00.1: MAC: 5, PHY: 0, PBA No: 020B00-000 [ 4.235464] ixgbe 0000:04:00.1: 0c:c4:7a:9f:8f:b7 [ 4.528040] ixgbe 0000:04:00.1: Intel(R) 10 Gigabit Network Connection [ 4.530506] ixgbe 0000:04:00.0 enx0cc47a9f8fb6: renamed from eth0 [ 4.530906] ixgbe 0000:04:00.1 enx0cc47a9f8fb7: renamed from eth1 [ 4.936049] EXT4-fs (dm-0): mounting ext3 file system using the ext4 subsystem [ 4.943220] EXT4-fs (dm-0): mounted filesystem 420d30bb-9e9b-4632-9d3a-72197707dddd ro with ordered data mode. Quota mode: none. [ 8.596951] EXT4-fs (dm-0): re-mounted 420d30bb-9e9b-4632-9d3a-72197707dddd r/w. Quota mode: none. [ 9.438249] EXT4-fs (sda1): mounting ext3 file system using the ext4 subsystem [ 9.454713] EXT4-fs (sda1): mounted filesystem 10e6e9e5-97ed-46f2-bc3a-07cf7a798bb7 r/w with ordered data mode. Quota mode: none. [ 9.549947] Adding 1949692k swap on /dev/mapper/debina0--vg-swap_1. Priority:-2 extents:1 across:1949692k [ 11.085175] xenbr0: port 1(enx0cc47a9f87be) entered blocking state [ 11.085345] xenbr0: port 1(enx0cc47a9f87be) entered disabled state [ 11.085478] igb 0000:07:00.0 enx0cc47a9f87be: entered allmulticast mode [ 11.085647] igb 0000:07:00.0 enx0cc47a9f87be: entered promiscuous mode [ 14.612465] igb 0000:07:00.0 enx0cc47a9f87be: igb: enx0cc47a9f87be NIC Link is Up 1000 Mbps Full Duplex, Flow Control: RX [ 14.818308] xenbr0: port 1(enx0cc47a9f87be) entered blocking state [ 14.818518] xenbr0: port 1(enx0cc47a9f87be) entered forwarding state