[ 0.000000] Linux version 6.1.93+ (osstest@pinot0) (gcc (Debian 12.2.0-14) 12.2.0, GNU ld (GNU Binutils for Debian) 2.40) #1 SMP PREEMPT_DYNAMIC Sat Jun 15 21:55:53 UTC 2024 [ 0.000000] Command line: placeholder root=/dev/mapper/debina0--vg-root ro console=hvc0 [ 0.000000] Released 0 page(s) [ 0.000000] BIOS-provided physical RAM map: [ 0.000000] Xen: [mem 0x0000000000000000-0x0000000000099fff] usable [ 0.000000] Xen: [mem 0x000000000009ac00-0x00000000000fffff] reserved [ 0.000000] Xen: [mem 0x0000000000100000-0x0000000020065fff] usable [ 0.000000] Xen: [mem 0x00000000796ef000-0x00000000798bdfff] reserved [ 0.000000] Xen: [mem 0x00000000799b7000-0x0000000079e5afff] ACPI NVS [ 0.000000] Xen: [mem 0x0000000079e5b000-0x000000007bdb0fff] reserved [ 0.000000] Xen: [mem 0x000000007bdb2000-0x000000007be37fff] reserved [ 0.000000] Xen: [mem 0x0000000080000000-0x000000008fffffff] reserved [ 0.000000] Xen: [mem 0x00000000fbffc000-0x00000000fbffcfff] reserved [ 0.000000] Xen: [mem 0x00000000fec00000-0x00000000fec00fff] reserved [ 0.000000] Xen: [mem 0x00000000fed1c000-0x00000000fed1ffff] reserved [ 0.000000] Xen: [mem 0x00000000fee00000-0x00000000feefffff] reserved [ 0.000000] Xen: [mem 0x00000000ff000000-0x00000000ffffffff] reserved [ 0.000000] NX (Execute Disable) protection: active [ 0.000000] SMBIOS 2.8 present. [ 0.000000] DMI: Supermicro SYS-5018D-FN8T/X10SDV-TP8F, BIOS 1.0b 11/21/2016 [ 0.000000] Hypervisor detected: Xen PV [ 0.000461] tsc: Detected 2200.000 MHz processor [ 0.000897] e820: update [mem 0x00000000-0x00000fff] usable ==> reserved [ 0.000901] e820: remove [mem 0x000a0000-0x000fffff] usable [ 0.000907] last_pfn = 0x20066 max_arch_pfn = 0x400000000 [ 0.000909] Disabled [ 0.000910] x86/PAT: MTRRs disabled, skipping PAT initialization too. [ 0.000914] x86/PAT: Configuration [0-7]: WB WT UC- UC WC WP UC UC [ 0.000953] Kernel/User page tables isolation: disabled on XEN PV. [ 0.027660] RAMDISK: [mem 0x04000000-0x0536afff] [ 0.027669] ACPI: Early table checksum verification disabled [ 0.028269] ACPI: RSDP 0x00000000000F0580 000024 (v02 SUPERM) [ 0.028281] ACPI: XSDT 0x00000000799FF098 0000B4 (v01 SUPERM SMCI--MB 01072009 AMI 00010013) [ 0.028317] ACPI: FACP 0x0000000079A17AC0 00010C (v05 SUPERM SMCI--MB 01072009 AMI 00010013) [ 0.028365] ACPI: DSDT 0x00000000799FF1E8 0188D5 (v02 SUPERM SMCI--MB 01072009 INTL 20091013) [ 0.028381] ACPI: FACS 0x0000000079E59F80 000040 [ 0.028397] ACPI: APIC 0x0000000079A17BD0 0000BC (v03 SUPERM SMCI--MB 01072009 AMI 00010013) [ 0.028413] ACPI: FPDT 0x0000000079A17C90 000044 (v01 SUPERM SMCI--MB 01072009 AMI 00010013) [ 0.028429] ACPI: FIDT 0x0000000079A17CD8 00009C (v01 SUPERM SMCI--MB 01072009 AMI 00010013) [ 0.028445] ACPI: MCFG 0x0000000079A17D78 00003C (v01 SUPERM SMCI--MB 01072009 MSFT 00000097) [ 0.028461] ACPI: UEFI 0x0000000079A17DB8 000042 (v01 00000000 00000000) [ 0.028477] ACPI: DBG2 0x0000000079A17E00 000072 (v00 SUPERM SMCI--MB 00000000 INTL 20091013) [ 0.028493] ACPI: HPET 0x0000000079A17E78 000038 (v01 SUPERM SMCI--MB 00000001 INTL 20091013) [ 0.028509] ACPI: WDDT 0x0000000079A17EB0 000040 (v01 SUPERM SMCI--MB 00000000 INTL 20091013) [ 0.028525] ACPI: SSDT 0x0000000079A17EF0 00ED8B (v01 AMI PmMgt 00000001 INTL 20120913) [ 0.028542] ACPI: SSDT 0x0000000079A26C80 002285 (v02 SUPERM SpsNm 00000002 INTL 20120913) [ 0.028558] ACPI: SSDT 0x0000000079A28F08 000064 (v02 SUPERM SpsNvs 00000002 INTL 20120913) [ 0.028574] ACPI: PRAD 0x0000000079A28F70 000102 (v02 SUPERM SMCI--MB 00000002 INTL 20120913) [ 0.028590] ACPI: RMAD 0x0000000079A29078 0000CC (v01 SUPERM SMCI--MB 00000001 INTL 20091013) [ 0.028606] ACPI: HEST 0x0000000079A29148 0000A8 (v01 SUPERM SMCI--MB 00000001 INTL 00000001) [ 0.028621] ACPI: BERT 0x0000000079A291F0 000030 (v01 SUPERM SMCI--MB 00000001 INTL 00000001) [ 0.028637] ACPI: ERST 0x0000000079A29220 000230 (v01 SUPERM SMCI--MB 00000001 INTL 00000001) [ 0.028653] ACPI: EINJ 0x0000000079A29450 000130 (v01 SUPERM SMCI--MB 00000001 INTL 00000001) [ 0.028662] ACPI: Reserving FACP table memory at [mem 0x79a17ac0-0x79a17bcb] [ 0.028663] ACPI: Reserving DSDT table memory at [mem 0x799ff1e8-0x79a17abc] [ 0.028665] ACPI: Reserving FACS table memory at [mem 0x79e59f80-0x79e59fbf] [ 0.028666] ACPI: Reserving APIC table memory at [mem 0x79a17bd0-0x79a17c8b] [ 0.028667] ACPI: Reserving FPDT table memory at [mem 0x79a17c90-0x79a17cd3] [ 0.028668] ACPI: Reserving FIDT table memory at [mem 0x79a17cd8-0x79a17d73] [ 0.028669] ACPI: Reserving MCFG table memory at [mem 0x79a17d78-0x79a17db3] [ 0.028670] ACPI: Reserving UEFI table memory at [mem 0x79a17db8-0x79a17df9] [ 0.028670] ACPI: Reserving DBG2 table memory at [mem 0x79a17e00-0x79a17e71] [ 0.028671] ACPI: Reserving HPET table memory at [mem 0x79a17e78-0x79a17eaf] [ 0.028672] ACPI: Reserving WDDT table memory at [mem 0x79a17eb0-0x79a17eef] [ 0.028673] ACPI: Reserving SSDT table memory at [mem 0x79a17ef0-0x79a26c7a] [ 0.028674] ACPI: Reserving SSDT table memory at [mem 0x79a26c80-0x79a28f04] [ 0.028675] ACPI: Reserving SSDT table memory at [mem 0x79a28f08-0x79a28f6b] [ 0.028676] ACPI: Reserving PRAD table memory at [mem 0x79a28f70-0x79a29071] [ 0.028677] ACPI: Reserving RMAD table memory at [mem 0x79a29078-0x79a29143] [ 0.028678] ACPI: Reserving HEST table memory at [mem 0x79a29148-0x79a291ef] [ 0.028679] ACPI: Reserving BERT table memory at [mem 0x79a291f0-0x79a2921f] [ 0.028680] ACPI: Reserving ERST table memory at [mem 0x79a29220-0x79a2944f] [ 0.028681] ACPI: Reserving EINJ table memory at [mem 0x79a29450-0x79a2957f] [ 0.028726] Setting APIC routing to Xen PV. [ 0.032683] Zone ranges: [ 0.032684] DMA [mem 0x0000000000001000-0x0000000000ffffff] [ 0.032686] DMA32 [mem 0x0000000001000000-0x0000000020065fff] [ 0.032688] Normal empty [ 0.032689] Movable zone start for each node [ 0.032690] Early memory node ranges [ 0.032690] node 0: [mem 0x0000000000001000-0x0000000000099fff] [ 0.032692] node 0: [mem 0x0000000000100000-0x0000000020065fff] [ 0.032694] Initmem setup node 0 [mem 0x0000000000001000-0x0000000020065fff] [ 0.032699] On node 0, zone DMA: 1 pages in unavailable ranges [ 0.032737] On node 0, zone DMA: 102 pages in unavailable ranges [ 0.034282] On node 0, zone DMA32: 32666 pages in unavailable ranges [ 0.034287] p2m virtual area at (____ptrval____), size is 40000000 [ 0.221782] Remapped 102 page(s) [ 0.223158] ACPI: PM-Timer IO Port: 0x408 [ 0.223210] ACPI: LAPIC_NMI (acpi_id[0x00] high level lint[0x1]) [ 0.223213] ACPI: LAPIC_NMI (acpi_id[0x02] high level lint[0x1]) [ 0.223214] ACPI: LAPIC_NMI (acpi_id[0x04] high level lint[0x1]) [ 0.223216] ACPI: LAPIC_NMI (acpi_id[0x06] high level lint[0x1]) [ 0.223217] ACPI: LAPIC_NMI (acpi_id[0x01] high level lint[0x1]) [ 0.223219] ACPI: LAPIC_NMI (acpi_id[0x03] high level lint[0x1]) [ 0.223220] ACPI: LAPIC_NMI (acpi_id[0x05] high level lint[0x1]) [ 0.223222] ACPI: LAPIC_NMI (acpi_id[0x07] high level lint[0x1]) [ 0.223250] IOAPIC[0]: apic_id 8, version 32, address 0xfec00000, GSI 0-23 [ 0.223264] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl) [ 0.223267] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level) [ 0.223293] ACPI: Using ACPI (MADT) for SMP configuration information [ 0.223298] ACPI: HPET id: 0x8086a701 base: 0xfed00000 [ 0.223367] smpboot: Allowing 8 CPUs, 0 hotplug CPUs [ 0.223382] PM: hibernation: Registered nosave memory: [mem 0x00000000-0x00000fff] [ 0.223385] PM: hibernation: Registered nosave memory: [mem 0x0009a000-0x0009afff] [ 0.223386] PM: hibernation: Registered nosave memory: [mem 0x0009b000-0x000fffff] [ 0.223388] [mem 0x90000000-0xfbffbfff] available for PCI devices [ 0.223393] Booting kernel on Xen [ 0.223394] Xen version: 4.19-unstable (preserve-AD) [ 0.223397] clocksource: refined-jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 1910969940391419 ns [ 0.229643] setup_percpu: NR_CPUS:64 nr_cpumask_bits:8 nr_cpu_ids:8 nr_node_ids:1 [ 0.229926] percpu: Embedded 54 pages/cpu s180520 r8192 d32472 u262144 [ 0.229932] pcpu-alloc: s180520 r8192 d32472 u262144 alloc=1*2097152 [ 0.229936] pcpu-alloc: [0] 0 1 2 3 4 5 6 7 [ 0.230015] xen: PV spinlocks enabled [ 0.230018] PV qspinlock hash table entries: 256 (order: 0, 4096 bytes, linear) [ 0.230023] Built 1 zonelists, mobility grouping on. Total pages: 129006 [ 0.230026] Kernel command line: placeholder root=/dev/mapper/debina0--vg-root ro console=hvc0 [ 0.230063] Unknown kernel command line parameters "placeholder", will be passed to user space. [ 0.230073] random: crng init done [ 0.230122] Dentry cache hash table entries: 65536 (order: 7, 524288 bytes, linear) [ 0.230147] Inode-cache hash table entries: 32768 (order: 6, 262144 bytes, linear) [ 0.231467] mem auto-init: stack:all(zero), heap alloc:off, heap free:off [ 0.231470] software IO TLB: area num 8. [ 0.290921] Memory: 390032K/524284K available (14349K kernel code, 2682K rwdata, 4576K rodata, 1580K init, 1296K bss, 134000K reserved, 0K cma-reserved) [ 0.291087] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=8, Nodes=1 [ 0.293589] Dynamic Preempt: voluntary [ 0.293689] rcu: Preemptible hierarchical RCU implementation. [ 0.293690] rcu: RCU event tracing is enabled. [ 0.293691] rcu: RCU restricting CPUs from NR_CPUS=64 to nr_cpu_ids=8. [ 0.293692] Trampoline variant of Tasks RCU enabled. [ 0.293693] rcu: RCU calculated value of scheduler-enlistment delay is 100 jiffies. [ 0.293694] rcu: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=8 [ 0.304230] NR_IRQS: 4352, nr_irqs: 488, preallocated irqs: 16 [ 0.304355] xen:events: Using FIFO-based ABI [ 0.304379] xen: --> pirq=1 -> irq=1 (gsi=1) [ 0.304388] xen: --> pirq=2 -> irq=2 (gsi=2) [ 0.304395] xen: --> pirq=3 -> irq=3 (gsi=3) [ 0.304402] xen: --> pirq=4 -> irq=4 (gsi=4) [ 0.304409] xen: --> pirq=5 -> irq=5 (gsi=5) [ 0.304417] xen: --> pirq=6 -> irq=6 (gsi=6) [ 0.304424] xen: --> pirq=7 -> irq=7 (gsi=7) [ 0.304431] xen: --> pirq=8 -> irq=8 (gsi=8) [ 0.304438] xen: --> pirq=9 -> irq=9 (gsi=9) [ 0.304445] xen: --> pirq=10 -> irq=10 (gsi=10) [ 0.304453] xen: --> pirq=11 -> irq=11 (gsi=11) [ 0.304460] xen: --> pirq=12 -> irq=12 (gsi=12) [ 0.304467] xen: --> pirq=13 -> irq=13 (gsi=13) [ 0.304476] xen: --> pirq=14 -> irq=14 (gsi=14) [ 0.304483] xen: --> pirq=15 -> irq=15 (gsi=15) [ 0.304494] rcu: srcu_init: Setting srcu_struct sizes based on contention. [ 0.309855] Console: colour VGA+ 80x25 [ 0.324693] printk: console [tty0] enabled [ 0.326025] printk: console [hvc0] enabled [ 0.326164] ACPI: Core revision 20220331 [ 0.341645] clocksource: xen: mask: 0xffffffffffffffff max_cycles: 0x1cd42e4dffb, max_idle_ns: 881590591483 ns [ 0.341811] Xen: using vcpuop timer interface [ 0.341819] installing Xen timer for CPU 0 [ 0.341969] clocksource: tsc-early: mask: 0xffffffffffffffff max_cycles: 0x1fb633008a4, max_idle_ns: 440795292230 ns [ 0.342129] Calibrating delay loop (skipped), value calculated using timer frequency.. 4400.00 BogoMIPS (lpj=2200000) [ 0.342459] Last level iTLB entries: 4KB 64, 2MB 8, 4MB 8 [ 0.342576] Last level dTLB entries: 4KB 64, 2MB 0, 4MB 0, 1GB 4 [ 0.342703] Spectre V1 : Mitigation: usercopy/swapgs barriers and __user pointer sanitization [ 0.342853] Spectre V2 : Mitigation: Retpolines [ 0.343135] Spectre V2 : Spectre v2 / SpectreRSB mitigation: Filling RSB on context switch [ 0.343294] Spectre V2 : Spectre v2 / SpectreRSB : Filling RSB on VMEXIT [ 0.343414] Spectre V2 : Enabling Restricted Speculation for firmware calls [ 0.343536] Spectre V2 : mitigation: Enabling conditional Indirect Branch Prediction Barrier [ 0.343685] Spectre V2 : User space: Mitigation: STIBP via prctl [ 0.343804] Speculative Store Bypass: Mitigation: Speculative Store Bypass disabled via prctl [ 0.343956] MDS: Mitigation: Clear CPU buffers [ 0.344070] TAA: Mitigation: Clear CPU buffers [ 0.344132] MMIO Stale Data: Vulnerable: Clear CPU buffers attempted, no microcode [ 0.344299] x86/fpu: Supporting XSAVE feature 0x001: 'x87 floating point registers' [ 0.344447] x86/fpu: Supporting XSAVE feature 0x002: 'SSE registers' [ 0.344593] x86/fpu: Supporting XSAVE feature 0x004: 'AVX registers' [ 0.344713] x86/fpu: xstate_offset[2]: 576, xstate_sizes[2]: 256 [ 0.344833] x86/fpu: Enabled xstate features 0x7, context size is 832 bytes, using 'standard' format. [ 0.362685] Freeing SMP alternatives memory: 40K [ 0.362813] pid_max: default: 32768 minimum: 301 [ 0.363151] LSM: Security Framework initializing [ 0.363283] SELinux: Initializing. [ 0.363423] Mount-cache hash table entries: 1024 (order: 1, 8192 bytes, linear) [ 0.363571] Mountpoint-cache hash table entries: 1024 (order: 1, 8192 bytes, linear) [ 0.364221] cpu 0 spinlock event irq 25 [ 0.364341] VPMU disabled by hypervisor. [ 0.364777] cblist_init_generic: Setting adjustable number of callback queues. [ 0.364924] cblist_init_generic: Setting shift to 3 and lim to 1. [ 0.365081] Performance Events: unsupported p6 CPU model 86 no PMU driver, software events only. [ 0.365134] signal: max sigframe size: 1776 [ 0.365298] rcu: Hierarchical SRCU implementation. [ 0.365418] rcu: Max phase no-delay instances is 400. [ 0.365912] smp: Bringing up secondary CPUs ... [ 0.366250] installing Xen timer for CPU 1 [ 0.366717] cpu 1 spinlock event irq 35 [ 0.367270] MDS CPU bug present and SMT on, data leak possible. See https://www.kernel.org/doc/html/latest/admin-guide/hw-vuln/mds.html for more details. [ 0.367439] TAA CPU bug present and SMT on, data leak possible. See https://www.kernel.org/doc/html/latest/admin-guide/hw-vuln/tsx_async_abort.html for more details. [ 0.367629] MMIO Stale Data CPU bug present and SMT on, data leak possible. See https://www.kernel.org/doc/html/latest/admin-guide/hw-vuln/processor_mmio_stale_data.html for more details. [ 0.368353] installing Xen timer for CPU 2 [ 0.368821] cpu 2 spinlock event irq 41 [ 0.369227] installing Xen timer for CPU 3 [ 0.369704] cpu 3 spinlock event irq 47 [ 0.369704] installing Xen timer for CPU 4 [ 0.370469] cpu 4 spinlock event irq 53 [ 0.370469] installing Xen timer for CPU 5 [ 0.371284] cpu 5 spinlock event irq 59 [ 0.371336] installing Xen timer for CPU 6 [ 0.372173] cpu 6 spinlock event irq 65 [ 0.372384] installing Xen timer for CPU 7 [ 0.372813] cpu 7 spinlock event irq 71 [ 0.373330] smp: Brought up 1 node, 8 CPUs [ 0.373454] smpboot: Max logical packages: 1 [ 0.373672] devtmpfs: initialized [ 0.373672] x86/mm: Memory block size: 128MB [ 0.374361] ACPI: PM: Registering ACPI NVS region [mem 0x799b7000-0x79e5afff] (4866048 bytes) [ 0.374420] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 1911260446275000 ns [ 0.374584] futex hash table entries: 2048 (order: 5, 131072 bytes, linear) [ 0.375133] PM: RTC time: 22:34:14, date: 2024-06-15 [ 0.375395] NET: Registered PF_NETLINK/PF_ROUTE protocol family [ 0.375542] xen:grant_table: Grant tables using version 1 layout [ 0.375680] Grant table initialized [ 0.375987] audit: initializing netlink subsys (disabled) [ 0.376149] audit: type=2000 audit(1718490854.365:1): state=initialized audit_enabled=0 res=1 [ 0.376226] thermal_sys: Registered thermal governor 'step_wise' [ 0.376226] thermal_sys: Registered thermal governor 'user_space' [ 0.376348] ACPI FADT declares the system doesn't support PCIe ASPM, so disable it [ 0.376783] PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0x80000000-0x8fffffff] (base 0x80000000) [ 0.377136] PCI: MMCONFIG at [mem 0x80000000-0x8fffffff] reserved in E820 [ 0.504518] PCI: Using configuration type 1 for base access [ 0.507178] kprobes: kprobe jump-optimization is enabled. All kprobes are optimized if possible. [ 0.507354] ACPI: Added _OSI(Module Device) [ 0.507354] ACPI: Added _OSI(Processor Device) [ 0.507425] ACPI: Added _OSI(3.0 _SCP Extensions) [ 0.507539] ACPI: Added _OSI(Processor Aggregator Device) [ 0.537776] ACPI: 4 ACPI AML tables successfully acquired and loaded [ 0.539762] xen: registering gsi 9 triggering 0 polarity 0 [ 0.542538] ACPI: Dynamic OEM Table Load: [ 0.552146] ACPI: Interpreter enabled [ 0.552280] ACPI: PM: (supports S0 S4 S5) [ 0.552392] ACPI: Using IOAPIC for interrupt routing [ 0.552734] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug [ 0.552886] PCI: Using E820 reservations for host bridge windows [ 0.553467] ACPI: Enabled 6 GPEs in block 00 to 3F [ 0.589364] ACPI: PCI Root Bridge [UNC0] (domain 0000 [bus ff]) [ 0.589495] acpi PNP0A03:03: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI HPX-Type3] [ 0.589733] acpi PNP0A03:03: _OSC: platform does not support [LTR] [ 0.589995] acpi PNP0A03:03: _OSC: OS now controls [PME PCIeCapability] [ 0.590117] acpi PNP0A03:03: FADT indicates ASPM is unsupported, using BIOS configuration [ 0.590161] PCI host bridge to bus 0000:ff [ 0.590275] pci_bus 0000:ff: root bus resource [bus ff] [ 0.590469] pci 0000:ff:0b.0: [8086:6f81] type 00 class 0x088000 [ 0.590916] pci 0000:ff:0b.1: [8086:6f36] type 00 class 0x110100 [ 0.591375] pci 0000:ff:0b.2: [8086:6f37] type 00 class 0x110100 [ 0.591992] pci 0000:ff:0b.3: [8086:6f76] type 00 class 0x088000 [ 0.592438] pci 0000:ff:0c.0: [8086:6fe0] type 00 class 0x088000 [ 0.592861] pci 0000:ff:0c.1: [8086:6fe1] type 00 class 0x088000 [ 0.593281] pci 0000:ff:0c.2: [8086:6fe2] type 00 class 0x088000 [ 0.593704] pci 0000:ff:0c.3: [8086:6fe3] type 00 class 0x088000 [ 0.594155] pci 0000:ff:0f.0: [8086:6ff8] type 00 class 0x088000 [ 0.594791] pci 0000:ff:0f.4: [8086:6ffc] type 00 class 0x088000 [ 0.595215] pci 0000:ff:0f.5: [8086:6ffd] type 00 class 0x088000 [ 0.595836] pci 0000:ff:0f.6: [8086:6ffe] type 00 class 0x088000 [ 0.596272] pci 0000:ff:10.0: [8086:6f1d] type 00 class 0x088000 [ 0.596694] pci 0000:ff:10.1: [8086:6f34] type 00 class 0x110100 [ 0.597131] pci 0000:ff:10.5: [8086:6f1e] type 00 class 0x088000 [ 0.597556] pci 0000:ff:10.6: [8086:6f7d] type 00 class 0x110100 [ 0.597978] pci 0000:ff:10.7: [8086:6f1f] type 00 class 0x088000 [ 0.598408] pci 0000:ff:12.0: [8086:6fa0] type 00 class 0x088000 [ 0.598662] pci 0000:ff:12.1: [8086:6f30] type 00 class 0x110100 [ 0.599122] pci 0000:ff:13.0: [8086:6fa8] type 00 class 0x088000 [ 0.599806] pci 0000:ff:13.1: [8086:6f71] type 00 class 0x088000 [ 0.600274] pci 0000:ff:13.2: [8086:6faa] type 00 class 0x088000 [ 0.600741] pci 0000:ff:13.3: [8086:6fab] type 00 class 0x088000 [ 0.601211] pci 0000:ff:13.4: [8086:6fac] type 00 class 0x088000 [ 0.601681] pci 0000:ff:13.5: [8086:6fad] type 00 class 0x088000 [ 0.602141] pci 0000:ff:13.6: [8086:6fae] type 00 class 0x088000 [ 0.602768] pci 0000:ff:13.7: [8086:6faf] type 00 class 0x088000 [ 0.603202] pci 0000:ff:14.0: [8086:6fb0] type 00 class 0x088000 [ 0.603877] pci 0000:ff:14.1: [8086:6fb1] type 00 class 0x088000 [ 0.604346] pci 0000:ff:14.2: [8086:6fb2] type 00 class 0x088000 [ 0.604813] pci 0000:ff:14.3: [8086:6fb3] type 00 class 0x088000 [ 0.605276] pci 0000:ff:14.4: [8086:6fbc] type 00 class 0x088000 [ 0.605699] pci 0000:ff:14.5: [8086:6fbd] type 00 class 0x088000 [ 0.605699] pci 0000:ff:14.6: [8086:6fbe] type 00 class 0x088000 [ 0.605699] pci 0000:ff:14.7: [8086:6fbf] type 00 class 0x088000 [ 0.605989] pci 0000:ff:15.0: [8086:6fb4] type 00 class 0x088000 [ 0.606127] pci 0000:ff:15.1: [8086:6fb5] type 00 class 0x088000 [ 0.606127] pci 0000:ff:15.2: [8086:6fb6] type 00 class 0x088000 [ 0.607599] pci 0000:ff:15.3: [8086:6fb7] type 00 class 0x088000 [ 0.608116] pci 0000:ff:1e.0: [8086:6f98] type 00 class 0x088000 [ 0.608436] pci 0000:ff:1e.1: [8086:6f99] type 00 class 0x088000 [ 0.608859] pci 0000:ff:1e.2: [8086:6f9a] type 00 class 0x088000 [ 0.609465] pci 0000:ff:1e.3: [8086:6fc0] type 00 class 0x088000 [ 0.609718] pci 0000:ff:1e.4: [8086:6f9c] type 00 class 0x088000 [ 0.610156] pci 0000:ff:1f.0: [8086:6f88] type 00 class 0x088000 [ 0.610768] pci 0000:ff:1f.2: [8086:6f8a] type 00 class 0x088000 [ 0.611198] pci_bus 0000:ff: on NUMA node 0 [ 0.615677] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-fe]) [ 0.615807] acpi PNP0A08:00: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI HPX-Type3] [ 0.616084] acpi PNP0A08:00: _OSC: platform does not support [PME LTR] [ 0.616354] acpi PNP0A08:00: _OSC: OS now controls [PCIeCapability] [ 0.616475] acpi PNP0A08:00: FADT indicates ASPM is unsupported, using BIOS configuration [ 0.616958] PCI host bridge to bus 0000:00 [ 0.617073] pci_bus 0000:00: root bus resource [io 0x0000-0x0cf7 window] [ 0.617133] pci_bus 0000:00: root bus resource [io 0x1000-0xffff window] [ 0.617256] pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff window] [ 0.617402] pci_bus 0000:00: root bus resource [mem 0x90000000-0xfbffbfff window] [ 0.617547] pci_bus 0000:00: root bus resource [bus 00-fe] [ 0.617728] pci 0000:00:00.0: [8086:6f00] type 00 class 0x060000 [ 0.618566] pci 0000:00:01.0: [8086:6f02] type 01 class 0x060400 [ 0.619089] pci 0000:00:01.0: PME# supported from D0 D3hot D3cold [ 0.620381] pci 0000:00:01.1: [8086:6f03] type 01 class 0x060400 [ 0.620903] pci 0000:00:01.1: PME# supported from D0 D3hot D3cold [ 0.621295] pci 0000:00:02.0: [8086:6f04] type 01 class 0x060400 [ 0.621812] pci 0000:00:02.0: PME# supported from D0 D3hot D3cold [ 0.622187] pci 0000:00:02.2: [8086:6f06] type 01 class 0x060400 [ 0.622704] pci 0000:00:02.2: PME# supported from D0 D3hot D3cold [ 0.622704] pci 0000:00:03.0: [8086:6f08] type 01 class 0x060400 [ 0.622795] pci 0000:00:03.0: PME# supported from D0 D3hot D3cold [ 0.623127] pci 0000:00:03.2: [8086:6f0a] type 01 class 0x060400 [ 0.623127] pci 0000:00:03.2: PME# supported from D0 D3hot D3cold [ 0.623127] pci 0000:00:05.0: [8086:6f28] type 00 class 0x088000 [ 0.624592] pci 0000:00:05.1: [8086:6f29] type 00 class 0x088000 [ 0.625423] pci 0000:00:05.2: [8086:6f2a] type 00 class 0x088000 [ 0.626302] pci 0000:00:14.0: [8086:8c31] type 00 class 0x0c0330 [ 0.626521] pci 0000:00:14.0: reg 0x10: [mem 0xfb600000-0xfb60ffff 64bit] [ 0.626989] pci 0000:00:14.0: PME# supported from D3hot D3cold [ 0.627333] pci 0000:00:16.0: [8086:8c3a] type 00 class 0x078000 [ 0.627552] pci 0000:00:16.0: reg 0x10: [mem 0xfb617000-0xfb61700f 64bit] [ 0.628018] pci 0000:00:16.0: PME# supported from D0 D3hot D3cold [ 0.628315] pci 0000:00:16.1: [8086:8c3b] type 00 class 0x078000 [ 0.628533] pci 0000:00:16.1: reg 0x10: [mem 0xfb616000-0xfb61600f 64bit] [ 0.628997] pci 0000:00:16.1: PME# supported from D0 D3hot D3cold [ 0.629360] pci 0000:00:1a.0: [8086:8c2d] type 00 class 0x0c0320 [ 0.629558] pci 0000:00:1a.0: reg 0x10: [mem 0xfb614000-0xfb6143ff] [ 0.630286] pci 0000:00:1a.0: PME# supported from D0 D3hot D3cold [ 0.630606] pci 0000:00:1c.0: [8086:8c10] type 01 class 0x060400 [ 0.631161] pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold [ 0.631362] pci 0000:00:1c.0: Enabling MPC IRBNCE [ 0.631485] pci 0000:00:1c.0: Intel PCH root port ACS workaround enabled [ 0.640305] pci 0000:00:1c.1: [8086:8c12] type 01 class 0x060400 [ 0.640868] pci 0000:00:1c.1: PME# supported from D0 D3hot D3cold [ 0.641210] pci 0000:00:1c.1: Enabling MPC IRBNCE [ 0.641333] pci 0000:00:1c.1: Intel PCH root port ACS workaround enabled [ 0.641626] pci 0000:00:1c.3: [8086:8c16] type 01 class 0x060400 [ 0.642391] pci 0000:00:1c.3: PME# supported from D0 D3hot D3cold [ 0.642588] pci 0000:00:1c.3: Enabling MPC IRBNCE [ 0.642710] pci 0000:00:1c.3: Intel PCH root port ACS workaround enabled [ 0.642997] pci 0000:00:1c.4: [8086:8c18] type 01 class 0x060400 [ 0.643561] pci 0000:00:1c.4: PME# supported from D0 D3hot D3cold [ 0.643756] pci 0000:00:1c.4: Enabling MPC IRBNCE [ 0.643878] pci 0000:00:1c.4: Intel PCH root port ACS workaround enabled [ 0.644208] pci 0000:00:1d.0: [8086:8c26] type 00 class 0x0c0320 [ 0.644406] pci 0000:00:1d.0: reg 0x10: [mem 0xfb613000-0xfb6133ff] [ 0.644946] pci 0000:00:1d.0: PME# supported from D0 D3hot D3cold [ 0.645269] pci 0000:00:1f.0: [8086:8c54] type 00 class 0x060100 [ 0.646223] pci 0000:00:1f.2: [8086:8c02] type 00 class 0x010601 [ 0.646419] pci 0000:00:1f.2: reg 0x10: [io 0xf070-0xf077] [ 0.646578] pci 0000:00:1f.2: reg 0x14: [io 0xf060-0xf063] [ 0.646736] pci 0000:00:1f.2: reg 0x18: [io 0xf050-0xf057] [ 0.646894] pci 0000:00:1f.2: reg 0x1c: [io 0xf040-0xf043] [ 0.647052] pci 0000:00:1f.2: reg 0x20: [io 0xf020-0xf03f] [ 0.647172] pci 0000:00:1f.2: reg 0x24: [mem 0xfb612000-0xfb6127ff] [ 0.647488] pci 0000:00:1f.2: PME# supported from D3hot [ 0.647772] pci 0000:00:1f.3: [8086:8c22] type 00 class 0x0c0500 [ 0.647990] pci 0000:00:1f.3: reg 0x10: [mem 0xfb611000-0xfb6110ff 64bit] [ 0.648232] pci 0000:00:1f.3: reg 0x20: [io 0xf000-0xf01f] [ 0.648613] pci 0000:00:1f.6: [8086:8c24] type 00 class 0x118000 [ 0.649027] pci 0000:00:1f.6: reg 0x10: [mem 0xfb610000-0xfb610fff 64bit] [ 0.649929] pci 0000:00:01.0: PCI bridge to [bus 01] [ 0.650225] pci 0000:00:01.1: PCI bridge to [bus 02] [ 0.650558] pci 0000:03:00.0: [8086:6f50] type 00 class 0x088000 [ 0.650771] pci 0000:03:00.0: reg 0x10: [mem 0xfb506000-0xfb507fff 64bit] [ 0.651528] pci 0000:03:00.1: [8086:6f51] type 00 class 0x088000 [ 0.651742] pci 0000:03:00.1: reg 0x10: [mem 0xfb504000-0xfb505fff 64bit] [ 0.652451] pci 0000:03:00.2: [8086:6f52] type 00 class 0x088000 [ 0.652664] pci 0000:03:00.2: reg 0x10: [mem 0xfb502000-0xfb503fff 64bit] [ 0.653372] pci 0000:03:00.3: [8086:6f53] type 00 class 0x088000 [ 0.653585] pci 0000:03:00.3: reg 0x10: [mem 0xfb500000-0xfb501fff 64bit] [ 0.654492] pci 0000:00:02.0: PCI bridge to [bus 03] [ 0.654628] pci 0000:00:02.0: bridge window [mem 0xfb500000-0xfb5fffff] [ 0.654969] pci 0000:04:00.0: [8086:15ac] type 00 class 0x020000 [ 0.655182] pci 0000:04:00.0: reg 0x10: [mem 0xfbc00000-0xfbdfffff 64bit pref] [ 0.655468] pci 0000:04:00.0: reg 0x20: [mem 0xfbe04000-0xfbe07fff 64bit pref] [ 0.655654] pci 0000:04:00.0: reg 0x30: [mem 0xfb480000-0xfb4fffff pref] [ 0.656006] pci 0000:04:00.0: PME# supported from D0 D3hot D3cold [ 0.656228] pci 0000:04:00.0: reg 0x184: [mem 0x00000000-0x00003fff 64bit] [ 0.656350] pci 0000:04:00.0: VF(n) BAR0 space: [mem 0x00000000-0x000fffff 64bit] (contains BAR0 for 64 VFs) [ 0.656555] pci 0000:04:00.0: reg 0x190: [mem 0x00000000-0x00003fff 64bit] [ 0.656874] pci 0000:04:00.0: VF(n) BAR3 space: [mem 0x00000000-0x000fffff 64bit] (contains BAR3 for 64 VFs) [ 0.657462] pci 0000:04:00.1: [8086:15ac] type 00 class 0x020000 [ 0.657886] pci 0000:04:00.1: reg 0x10: [mem 0xfba00000-0xfbbfffff 64bit pref] [ 0.658171] pci 0000:04:00.1: reg 0x20: [mem 0xfbe00000-0xfbe03fff 64bit pref] [ 0.658356] pci 0000:04:00.1: reg 0x30: [mem 0xfb400000-0xfb47ffff pref] [ 0.658712] pci 0000:04:00.1: PME# supported from D0 D3hot D3cold [ 0.658915] pci 0000:04:00.1: reg 0x184: [mem 0x00000000-0x00003fff 64bit] [ 0.659037] pci 0000:04:00.1: VF(n) BAR0 space: [mem 0x00000000-0x000fffff 64bit] (contains BAR0 for 64 VFs) [ 0.659182] pci 0000:04:00.1: reg 0x190: [mem 0x00000000-0x00003fff 64bit] [ 0.659303] pci 0000:04:00.1: VF(n) BAR3 space: [mem 0x00000000-0x000fffff 64bit] (contains BAR3 for 64 VFs) [ 0.659862] pci 0000:00:02.2: PCI bridge to [bus 04] [ 0.659998] pci 0000:00:02.2: bridge window [mem 0xfb400000-0xfb4fffff] [ 0.660141] pci 0000:00:02.2: bridge window [mem 0xfba00000-0xfbefffff 64bit pref] [ 0.660433] pci 0000:00:03.0: PCI bridge to [bus 05] [ 0.660726] pci 0000:00:03.2: PCI bridge to [bus 06] [ 0.661096] pci 0000:07:00.0: working around ROM BAR overlap defect [ 0.661132] pci 0000:07:00.0: [8086:1533] type 00 class 0x020000 [ 0.661339] pci 0000:07:00.0: reg 0x10: [mem 0xfb300000-0xfb37ffff] [ 0.661747] pci 0000:07:00.0: reg 0x18: [io 0xe000-0xe01f] [ 0.661913] pci 0000:07:00.0: reg 0x1c: [mem 0xfb380000-0xfb383fff] [ 0.662448] pci 0000:07:00.0: PME# supported from D0 D3hot D3cold [ 0.662913] pci 0000:00:1c.0: PCI bridge to [bus 07] [ 0.663040] pci 0000:00:1c.0: bridge window [io 0xe000-0xefff] [ 0.663141] pci 0000:00:1c.0: bridge window [mem 0xfb300000-0xfb3fffff] [ 0.663495] pci 0000:08:00.0: working around ROM BAR overlap defect [ 0.663616] pci 0000:08:00.0: [8086:1533] type 00 class 0x020000 [ 0.663837] pci 0000:08:00.0: reg 0x10: [mem 0xfb200000-0xfb27ffff] [ 0.664054] pci 0000:08:00.0: reg 0x18: [io 0xd000-0xd01f] [ 0.664180] pci 0000:08:00.0: reg 0x1c: [mem 0xfb280000-0xfb283fff] [ 0.664916] pci 0000:08:00.0: PME# supported from D0 D3hot D3cold [ 0.665597] pci 0000:00:1c.1: PCI bridge to [bus 08] [ 0.665725] pci 0000:00:1c.1: bridge window [io 0xd000-0xdfff] [ 0.665854] pci 0000:00:1c.1: bridge window [mem 0xfb200000-0xfb2fffff] [ 0.666199] pci 0000:09:00.0: [1a03:1150] type 01 class 0x060400 [ 0.666597] pci 0000:09:00.0: enabling Extended Tags [ 0.666939] pci 0000:09:00.0: supports D1 D2 [ 0.667054] pci 0000:09:00.0: PME# supported from D0 D1 D2 D3hot D3cold [ 0.667369] pci 0000:00:1c.3: PCI bridge to [bus 09-0a] [ 0.667496] pci 0000:00:1c.3: bridge window [io 0xc000-0xcfff] [ 0.667625] pci 0000:00:1c.3: bridge window [mem 0xfa000000-0xfb0fffff] [ 0.667933] pci_bus 0000:0a: extended config space not accessible [ 0.668104] pci 0000:0a:00.0: [1a03:2000] type 00 class 0x030000 [ 0.668218] pci 0000:0a:00.0: reg 0x10: [mem 0xfa000000-0xfaffffff] [ 0.668387] pci 0000:0a:00.0: reg 0x14: [mem 0xfb000000-0xfb01ffff] [ 0.668555] pci 0000:0a:00.0: reg 0x18: [io 0xc000-0xc07f] [ 0.668909] pci 0000:0a:00.0: Video device with shadowed ROM at [mem 0x000c0000-0x000dffff] [ 0.669410] pci 0000:0a:00.0: supports D1 D2 [ 0.669525] pci 0000:0a:00.0: PME# supported from D0 D1 D2 D3hot D3cold [ 0.669965] pci 0000:09:00.0: PCI bridge to [bus 0a] [ 0.670103] pci 0000:09:00.0: bridge window [io 0xc000-0xcfff] [ 0.670143] pci 0000:09:00.0: bridge window [mem 0xfa000000-0xfb0fffff] [ 0.670534] pci 0000:0b:00.0: [8086:1521] type 00 class 0x020000 [ 0.670735] pci 0000:0b:00.0: reg 0x10: [mem 0xfb160000-0xfb17ffff] [ 0.672225] pci 0000:0b:00.0: reg 0x18: [io 0xb060-0xb07f] [ 0.672390] pci 0000:0b:00.0: reg 0x1c: [mem 0xfb18c000-0xfb18ffff] [ 0.672913] pci 0000:0b:00.0: PME# supported from D0 D3hot D3cold [ 0.672913] pci 0000:0b:00.0: reg 0x184: [mem 0x00000000-0x00003fff 64bit pref] [ 0.672913] pci 0000:0b:00.0: VF(n) BAR0 space: [mem 0x00000000-0x0001ffff 64bit pref] (contains BAR0 for 8 VFs) [ 0.672913] pci 0000:0b:00.0: reg 0x190: [mem 0x00000000-0x00003fff 64bit pref] [ 0.672913] pci 0000:0b:00.0: VF(n) BAR3 space: [mem 0x00000000-0x0001ffff 64bit pref] (contains BAR3 for 8 VFs) [ 0.673127] pci 0000:0b:00.1: [8086:1521] type 00 class 0x020000 [ 0.673127] pci 0000:0b:00.1: reg 0x10: [mem 0xfb140000-0xfb15ffff] [ 0.673127] pci 0000:0b:00.1: reg 0x18: [io 0xb040-0xb05f] [ 0.673127] pci 0000:0b:00.1: reg 0x1c: [mem 0xfb188000-0xfb18bfff] [ 0.674358] pci 0000:0b:00.1: PME# supported from D0 D3hot D3cold [ 0.674588] pci 0000:0b:00.1: reg 0x184: [mem 0x00000000-0x00003fff 64bit pref] [ 0.674734] pci 0000:0b:00.1: VF(n) BAR0 space: [mem 0x00000000-0x0001ffff 64bit pref] (contains BAR0 for 8 VFs) [ 0.674952] pci 0000:0b:00.1: reg 0x190: [mem 0x00000000-0x00003fff 64bit pref] [ 0.675101] pci 0000:0b:00.1: VF(n) BAR3 space: [mem 0x00000000-0x0001ffff 64bit pref] (contains BAR3 for 8 VFs) [ 0.675638] pci 0000:0b:00.2: [8086:1521] type 00 class 0x020000 [ 0.675840] pci 0000:0b:00.2: reg 0x10: [mem 0xfb120000-0xfb13ffff] [ 0.676050] pci 0000:0b:00.2: reg 0x18: [io 0xb020-0xb03f] [ 0.676177] pci 0000:0b:00.2: reg 0x1c: [mem 0xfb184000-0xfb187fff] [ 0.676693] pci 0000:0b:00.2: PME# supported from D0 D3hot D3cold [ 0.676922] pci 0000:0b:00.2: reg 0x184: [mem 0x00000000-0x00003fff 64bit pref] [ 0.677068] pci 0000:0b:00.2: VF(n) BAR0 space: [mem 0x00000000-0x0001ffff 64bit pref] (contains BAR0 for 8 VFs) [ 0.677195] pci 0000:0b:00.2: reg 0x190: [mem 0x00000000-0x00003fff 64bit pref] [ 0.677341] pci 0000:0b:00.2: VF(n) BAR3 space: [mem 0x00000000-0x0001ffff 64bit pref] (contains BAR3 for 8 VFs) [ 0.677880] pci 0000:0b:00.3: [8086:1521] type 00 class 0x020000 [ 0.678082] pci 0000:0b:00.3: reg 0x10: [mem 0xfb100000-0xfb11ffff] [ 0.678222] pci 0000:0b:00.3: reg 0x18: [io 0xb000-0xb01f] [ 0.678384] pci 0000:0b:00.3: reg 0x1c: [mem 0xfb180000-0xfb183fff] [ 0.678895] pci 0000:0b:00.3: PME# supported from D0 D3hot D3cold [ 0.679139] pci 0000:0b:00.3: reg 0x184: [mem 0x00000000-0x00003fff 64bit pref] [ 0.679284] pci 0000:0b:00.3: VF(n) BAR0 space: [mem 0x00000000-0x0001ffff 64bit pref] (contains BAR0 for 8 VFs) [ 0.679503] pci 0000:0b:00.3: reg 0x190: [mem 0x00000000-0x00003fff 64bit pref] [ 0.679648] pci 0000:0b:00.3: VF(n) BAR3 space: [mem 0x00000000-0x0001ffff 64bit pref] (contains BAR3 for 8 VFs) [ 0.680237] pci 0000:00:1c.4: PCI bridge to [bus 0b] [ 0.680365] pci 0000:00:1c.4: bridge window [io 0xb000-0xbfff] [ 0.680521] pci 0000:00:1c.4: bridge window [mem 0xfb100000-0xfb1fffff] [ 0.680662] pci 0000:00:1c.4: bridge has subordinate 0b but max busn 0c [ 0.681131] pci_bus 0000:00: on NUMA node 0 [ 0.681226] xen: registering gsi 13 triggering 1 polarity 0 [ 0.682195] ACPI: PCI: Interrupt link LNKA configured for IRQ 11 [ 0.682392] ACPI: PCI: Interrupt link LNKB configured for IRQ 10 [ 0.682584] ACPI: PCI: Interrupt link LNKC configured for IRQ 5 [ 0.682776] ACPI: PCI: Interrupt link LNKD configured for IRQ 11 [ 0.682966] ACPI: PCI: Interrupt link LNKE configured for IRQ 0 [ 0.683085] ACPI: PCI: Interrupt link LNKE disabled [ 0.683204] ACPI: PCI: Interrupt link LNKF configured for IRQ 0 [ 0.683323] ACPI: PCI: Interrupt link LNKF disabled [ 0.683508] ACPI: PCI: Interrupt link LNKG configured for IRQ 0 [ 0.683627] ACPI: PCI: Interrupt link LNKG disabled [ 0.683812] ACPI: PCI: Interrupt link LNKH configured for IRQ 0 [ 0.683931] ACPI: PCI: Interrupt link LNKH disabled [ 0.684195] xen:balloon: Initialising balloon driver [ 0.685221] iommu: Default domain type: Translated [ 0.692134] iommu: DMA domain TLB invalidation policy: lazy mode [ 0.692323] SCSI subsystem initialized [ 0.693165] libata version 3.00 loaded. [ 0.693169] ACPI: bus type USB registered [ 0.693330] usbcore: registered new interface driver usbfs [ 0.693453] usbcore: registered new interface driver hub [ 0.693574] usbcore: registered new device driver usb [ 0.693702] pps_core: LinuxPPS API ver. 1 registered [ 0.693702] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti [ 0.693702] PTP clock support registered [ 0.694176] Advanced Linux Sound Architecture Driver Initialized. [ 0.694425] NetLabel: Initializing [ 0.694542] NetLabel: domain hash size = 128 [ 0.694666] NetLabel: protocols = UNLABELED CIPSOv4 CALIPSO [ 0.694666] NetLabel: unlabeled traffic allowed by default [ 0.695152] PCI: Using ACPI for IRQ routing [ 0.729636] PCI: pci_cache_line_size set to 64 bytes [ 0.730419] e820: reserve RAM buffer [mem 0x0009a000-0x0009ffff] [ 0.730422] e820: reserve RAM buffer [mem 0x20066000-0x23ffffff] [ 0.731169] pci 0000:0a:00.0: vgaarb: setting as boot VGA device [ 0.731291] pci 0000:0a:00.0: vgaarb: bridge control possible [ 0.731409] pci 0000:0a:00.0: vgaarb: VGA device added: decodes=io+mem,owns=io+mem,locks=none [ 0.731558] vgaarb: loaded [ 0.733133] clocksource: Switched to clocksource tsc-early [ 0.741521] VFS: Disk quotas dquot_6.6.0 [ 0.741663] VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes) [ 0.741810] hugetlbfs: disabling because there are no supported hugepage sizes [ 0.741970] pnp: PnP ACPI init [ 0.742494] xen: registering gsi 8 triggering 1 polarity 0 [ 0.742707] system 00:01: [io 0x0500-0x057f] has been reserved [ 0.742835] system 00:01: [io 0x0400-0x047f] has been reserved [ 0.742957] system 00:01: [io 0x0580-0x059f] has been reserved [ 0.743103] system 00:01: [io 0x0600-0x061f] has been reserved [ 0.743247] system 00:01: [io 0x0880-0x0883] has been reserved [ 0.743369] system 00:01: [io 0x0800-0x081f] has been reserved [ 0.743489] system 00:01: [mem 0xfed1c000-0xfed3ffff] could not be reserved [ 0.743611] system 00:01: [mem 0xfed45000-0xfed8bfff] has been reserved [ 0.743731] system 00:01: [mem 0xff000000-0xffffffff] has been reserved [ 0.743852] system 00:01: [mem 0xfee00000-0xfeefffff] has been reserved [ 0.743973] system 00:01: [mem 0xfed12000-0xfed1200f] has been reserved [ 0.744093] system 00:01: [mem 0xfed12010-0xfed1201f] has been reserved [ 0.744240] system 00:01: [mem 0xfed1b000-0xfed1bfff] has been reserved [ 0.744660] system 00:02: [io 0x0a00-0x0a0f] has been reserved [ 0.744781] system 00:02: [io 0x0a10-0x0a1f] has been reserved [ 0.744900] system 00:02: [io 0x0a20-0x0a2f] has been reserved [ 0.745019] system 00:02: [io 0x0a30-0x0a3f] has been reserved [ 0.745151] system 00:02: [io 0x0a40-0x0a4f] has been reserved [ 0.745583] xen: registering gsi 4 triggering 1 polarity 0 [ 0.745587] Already setup the GSI :4 [ 0.745700] pnp 00:03: [dma 0 disabled] [ 0.746014] xen: registering gsi 3 triggering 1 polarity 0 [ 0.746024] pnp 00:04: [dma 0 disabled] [ 0.746629] pnp: PnP ACPI: found 5 devices [ 0.778155] PM-Timer failed consistency check (0xffffff) - aborting. [ 0.778364] NET: Registered PF_INET protocol family [ 0.778526] IP idents hash table entries: 8192 (order: 4, 65536 bytes, linear) [ 0.778892] tcp_listen_portaddr_hash hash table entries: 256 (order: 0, 4096 bytes, linear) [ 0.779051] Table-perturb hash table entries: 65536 (order: 6, 262144 bytes, linear) [ 0.779251] TCP established hash table entries: 4096 (order: 3, 32768 bytes, linear) [ 0.779431] TCP bind hash table entries: 4096 (order: 5, 131072 bytes, linear) [ 0.779604] TCP: Hash tables configured (established 4096 bind 4096) [ 0.779749] UDP hash table entries: 256 (order: 1, 8192 bytes, linear) [ 0.779872] UDP-Lite hash table entries: 256 (order: 1, 8192 bytes, linear) [ 0.780024] NET: Registered PF_UNIX/PF_LOCAL protocol family [ 0.780491] RPC: Registered named UNIX socket transport module. [ 0.780618] RPC: Registered udp transport module. [ 0.780732] RPC: Registered tcp transport module. [ 0.780846] RPC: Registered tcp NFSv4.1 backchannel transport module. [ 0.781357] pci 0000:00:1c.4: bridge window [mem 0x00100000-0x000fffff 64bit pref] to [bus 0b] add_size 100000 add_align 100000 [ 0.781529] clipped [mem size 0x00000000 64bit pref] to [mem size 0xfffffffffffa0000 64bit pref] for e820 entry [mem 0x0009ac00-0x000fffff] [ 0.781693] clipped [mem size 0x00020000 64bit pref] to [mem size 0xfffffffffffc0000 64bit pref] for e820 entry [mem 0x0009ac00-0x000fffff] [ 0.781877] pci 0000:00:1c.4: BAR 15: assigned [mem 0x90000000-0x900fffff 64bit pref] [ 0.782024] pci 0000:00:01.0: PCI bridge to [bus 01] [ 0.782230] pci 0000:00:01.1: PCI bridge to [bus 02] [ 0.782409] pci 0000:00:02.0: PCI bridge to [bus 03] [ 0.782545] pci 0000:00:02.0: bridge window [mem 0xfb500000-0xfb5fffff] [ 0.782708] pci 0000:04:00.0: BAR 7: no space for [mem size 0x00100000 64bit] [ 0.782831] pci 0000:04:00.0: BAR 7: failed to assign [mem size 0x00100000 64bit] [ 0.782977] pci 0000:04:00.0: BAR 10: no space for [mem size 0x00100000 64bit] [ 0.783121] pci 0000:04:00.0: BAR 10: failed to assign [mem size 0x00100000 64bit] [ 0.783319] pci 0000:04:00.1: BAR 7: no space for [mem size 0x00100000 64bit] [ 0.783444] pci 0000:04:00.1: BAR 7: failed to assign [mem size 0x00100000 64bit] [ 0.783590] pci 0000:04:00.1: BAR 10: no space for [mem size 0x00100000 64bit] [ 0.783734] pci 0000:04:00.1: BAR 10: failed to assign [mem size 0x00100000 64bit] [ 0.783880] pci 0000:04:00.0: BAR 7: no space for [mem size 0x00100000 64bit] [ 0.784003] pci 0000:04:00.0: BAR 7: failed to assign [mem size 0x00100000 64bit] [ 0.784163] pci 0000:04:00.0: BAR 10: no space for [mem size 0x00100000 64bit] [ 0.784324] pci 0000:04:00.0: BAR 10: failed to assign [mem size 0x00100000 64bit] [ 0.784472] pci 0000:04:00.1: BAR 7: no space for [mem size 0x00100000 64bit] [ 0.784622] pci 0000:04:00.1: BAR 7: failed to assign [mem size 0x00100000 64bit] [ 0.784767] pci 0000:04:00.1: BAR 10: no space for [mem size 0x00100000 64bit] [ 0.784911] pci 0000:04:00.1: BAR 10: failed to assign [mem size 0x00100000 64bit] [ 0.785057] pci 0000:00:02.2: PCI bridge to [bus 04] [ 0.785222] pci 0000:00:02.2: bridge window [mem 0xfb400000-0xfb4fffff] [ 0.785358] pci 0000:00:02.2: bridge window [mem 0xfba00000-0xfbefffff 64bit pref] [ 0.785531] pci 0000:00:03.0: PCI bridge to [bus 05] [ 0.785704] pci 0000:00:03.2: PCI bridge to [bus 06] [ 0.785878] pci 0000:00:1c.0: PCI bridge to [bus 07] [ 0.786024] pci 0000:00:1c.0: bridge window [io 0xe000-0xefff] [ 0.786179] pci 0000:00:1c.0: bridge window [mem 0xfb300000-0xfb3fffff] [ 0.786356] pci 0000:00:1c.1: PCI bridge to [bus 08] [ 0.786478] pci 0000:00:1c.1: bridge window [io 0xd000-0xdfff] [ 0.786617] pci 0000:00:1c.1: bridge window [mem 0xfb200000-0xfb2fffff] [ 0.786780] pci 0000:09:00.0: PCI bridge to [bus 0a] [ 0.786901] pci 0000:09:00.0: bridge window [io 0xc000-0xcfff] [ 0.787042] pci 0000:09:00.0: bridge window [mem 0xfa000000-0xfb0fffff] [ 0.787239] pci 0000:00:1c.3: PCI bridge to [bus 09-0a] [ 0.787394] pci 0000:00:1c.3: bridge window [io 0xc000-0xcfff] [ 0.787534] pci 0000:00:1c.3: bridge window [mem 0xfa000000-0xfb0fffff] [ 0.787699] pci 0000:0b:00.0: BAR 7: assigned [mem 0x90000000-0x9001ffff 64bit pref] [ 0.787857] pci 0000:0b:00.0: BAR 10: assigned [mem 0x90020000-0x9003ffff 64bit pref] [ 0.788010] pci 0000:0b:00.1: BAR 7: assigned [mem 0x90040000-0x9005ffff 64bit pref] [ 0.788181] pci 0000:0b:00.1: BAR 10: assigned [mem 0x90060000-0x9007ffff 64bit pref] [ 0.788352] pci 0000:0b:00.2: BAR 7: assigned [mem 0x90080000-0x9009ffff 64bit pref] [ 0.788506] pci 0000:0b:00.2: BAR 10: assigned [mem 0x900a0000-0x900bffff 64bit pref] [ 0.788660] pci 0000:0b:00.3: BAR 7: assigned [mem 0x900c0000-0x900dffff 64bit pref] [ 0.788844] pci 0000:0b:00.3: BAR 10: assigned [mem 0x900e0000-0x900fffff 64bit pref] [ 0.788998] pci 0000:00:1c.4: PCI bridge to [bus 0b] [ 0.789118] pci 0000:00:1c.4: bridge window [io 0xb000-0xbfff] [ 0.789281] pci 0000:00:1c.4: bridge window [mem 0xfb100000-0xfb1fffff] [ 0.789417] pci 0000:00:1c.4: bridge window [mem 0x90000000-0x900fffff 64bit pref] [ 0.789591] pci_bus 0000:00: Some PCI device resources are unassigned, try booting with pci=realloc [ 0.789741] pci_bus 0000:00: resource 4 [io 0x0000-0x0cf7 window] [ 0.789861] pci_bus 0000:00: resource 5 [io 0x1000-0xffff window] [ 0.789980] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff window] [ 0.790145] pci_bus 0000:00: resource 7 [mem 0x90000000-0xfbffbfff window] [ 0.790282] pci_bus 0000:03: resource 1 [mem 0xfb500000-0xfb5fffff] [ 0.790404] pci_bus 0000:04: resource 1 [mem 0xfb400000-0xfb4fffff] [ 0.790523] pci_bus 0000:04: resource 2 [mem 0xfba00000-0xfbefffff 64bit pref] [ 0.790668] pci_bus 0000:07: resource 0 [io 0xe000-0xefff] [ 0.790785] pci_bus 0000:07: resource 1 [mem 0xfb300000-0xfb3fffff] [ 0.790904] pci_bus 0000:08: resource 0 [io 0xd000-0xdfff] [ 0.791020] pci_bus 0000:08: resource 1 [mem 0xfb200000-0xfb2fffff] [ 0.791153] pci_bus 0000:09: resource 0 [io 0xc000-0xcfff] [ 0.791281] pci_bus 0000:09: resource 1 [mem 0xfa000000-0xfb0fffff] [ 0.791403] pci_bus 0000:0a: resource 0 [io 0xc000-0xcfff] [ 0.791551] pci_bus 0000:0a: resource 1 [mem 0xfa000000-0xfb0fffff] [ 0.791671] pci_bus 0000:0b: resource 0 [io 0xb000-0xbfff] [ 0.791787] pci_bus 0000:0b: resource 1 [mem 0xfb100000-0xfb1fffff] [ 0.791906] pci_bus 0000:0b: resource 2 [mem 0x90000000-0x900fffff 64bit pref] [ 0.792471] pci 0000:00:05.0: disabled boot interrupts on device [8086:6f28] [ 0.792688] xen: registering gsi 19 triggering 0 polarity 1 [ 0.792715] xen: --> pirq=19 -> irq=19 (gsi=19) [ 0.801534] xen: registering gsi 18 triggering 0 polarity 1 [ 0.801553] xen: --> pirq=18 -> irq=18 (gsi=18) [ 0.817509] pci 0000:00:1a.0: quirk_usb_early_handoff+0x0/0x720 took 15652 usecs [ 0.817756] xen: registering gsi 18 triggering 0 polarity 1 [ 0.817761] Already setup the GSI :18 [ 0.834327] pci 0000:00:1d.0: quirk_usb_early_handoff+0x0/0x720 took 16237 usecs [ 0.834542] pci 0000:04:00.0: CLS mismatch (64 != 32), using 64 bytes [ 0.834684] PCI-DMA: Using software bounce buffering for IO (SWIOTLB) [ 0.834757] Unpacking initramfs... [ 0.834804] software IO TLB: mapped [mem 0x000000001b180000-0x000000001f180000] (64MB) [ 0.835148] kvm: no hardware support for 'kvm_intel' [ 0.843026] has_svm: not amd or hygon [ 0.843154] kvm: no hardware support for 'kvm_amd' [ 0.843285] clocksource: tsc: mask: 0xffffffffffffffff max_cycles: 0x1fb633008a4, max_idle_ns: 440795292230 ns [ 0.843523] clocksource: Switched to clocksource tsc [ 0.846586] Initialise system trusted keyrings [ 0.846864] workingset: timestamp_bits=62 max_order=17 bucket_order=0 [ 0.848383] NFS: Registering the id_resolver key type [ 0.848507] Key type id_resolver registered [ 0.848618] Key type id_legacy registered [ 0.848811] 9p: Installing v9fs 9p2000 file system support [ 0.862344] Key type asymmetric registered [ 0.862470] Asymmetric key parser 'x509' registered [ 0.862608] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 251) [ 0.862774] io scheduler mq-deadline registered [ 0.862889] io scheduler kyber registered [ 0.863803] xen: registering gsi 16 triggering 0 polarity 1 [ 0.863832] xen: --> pirq=16 -> irq=16 (gsi=16) [ 0.864365] xen: registering gsi 16 triggering 0 polarity 1 [ 0.864371] Already setup the GSI :16 [ 0.864995] xen: registering gsi 16 triggering 0 polarity 1 [ 0.865001] Already setup the GSI :16 [ 0.865323] xen: registering gsi 16 triggering 0 polarity 1 [ 0.865326] Already setup the GSI :16 [ 0.865661] xen: registering gsi 16 triggering 0 polarity 1 [ 0.865665] Already setup the GSI :16 [ 0.866275] xen: registering gsi 16 triggering 0 polarity 1 [ 0.866280] Already setup the GSI :16 [ 0.866888] xen: registering gsi 16 triggering 0 polarity 1 [ 0.866893] Already setup the GSI :16 [ 0.867339] xen: registering gsi 17 triggering 0 polarity 1 [ 0.867359] xen: --> pirq=17 -> irq=17 (gsi=17) [ 0.867712] xen: registering gsi 19 triggering 0 polarity 1 [ 0.867717] Already setup the GSI :19 [ 0.868156] xen: registering gsi 16 triggering 0 polarity 1 [ 0.868161] Already setup the GSI :16 [ 0.868845] input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input0 [ 0.869022] ACPI: button: Power Button [PWRB] [ 0.869165] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input1 [ 0.869528] ACPI: button: Power Button [PWRF] [ 0.869814] Monitor-Mwait will be used to enter C-1 state [ 0.869848] Monitor-Mwait will be used to enter C-2 state [ 0.869864] ACPI: \_SB_.SCK0.CP00: Found 2 idle states [ 0.870357] ACPI: \_SB_.SCK0.CP01: Found 2 idle states [ 0.870733] ACPI: \_SB_.SCK0.CP02: Found 2 idle states [ 0.871091] ACPI: \_SB_.SCK0.CP03: Found 2 idle states [ 0.871589] ACPI: \_SB_.SCK0.CP04: Found 2 idle states [ 0.871955] ACPI: \_SB_.SCK0.CP05: Found 2 idle states [ 0.872458] ACPI: \_SB_.SCK0.CP06: Found 2 idle states [ 0.872936] ACPI: \_SB_.SCK0.CP07: Found 2 idle states [ 0.873757] xen:xen_evtchn: Event-channel device installed [ 0.873950] xen_pciback: backend is vpci [ 0.874757] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled [ 0.875080] 00:04: ttyS1 at I/O 0x2f8 (irq = 3, base_baud = 115200) is a 16550A [ 0.875879] hpet_acpi_add: no address or irqs in _CRS [ 0.876117] Non-volatile memory driver v1.3 [ 0.876232] AMD-Vi: AMD IOMMUv2 functionality not available on this system - This is not a bug. [ 0.878742] loop: module loaded [ 0.885123] ahci 0000:00:1f.2: version 3.0 [ 0.885225] xen: registering gsi 16 triggering 0 polarity 1 [ 0.885234] Already setup the GSI :16 [ 0.885566] ahci 0000:00:1f.2: AHCI 0001.0300 32 slots 6 ports 6 Gbps 0x3f impl SATA mode [ 0.885733] ahci 0000:00:1f.2: flags: 64bit ncq led clo pio ems apst [ 0.901293] scsi host0: ahci [ 0.901718] scsi host1: ahci [ 0.902049] scsi host2: ahci [ 0.902354] scsi host3: ahci [ 0.902699] scsi host4: ahci [ 0.903108] scsi host5: ahci [ 0.903254] ata1: SATA max UDMA/133 abar m2048@0xfb612000 port 0xfb612100 irq 75 [ 0.903408] ata2: SATA max UDMA/133 abar m2048@0xfb612000 port 0xfb612180 irq 75 [ 0.903554] ata3: SATA max UDMA/133 abar m2048@0xfb612000 port 0xfb612200 irq 75 [ 0.903711] ata4: SATA max UDMA/133 abar m2048@0xfb612000 port 0xfb612280 irq 75 [ 0.903856] ata5: SATA max UDMA/133 abar m2048@0xfb612000 port 0xfb612300 irq 75 [ 0.904001] ata6: SATA max UDMA/133 abar m2048@0xfb612000 port 0xfb612380 irq 75 [ 0.904427] tun: Universal TUN/TAP device driver, 1.6 [ 0.904691] e100: Intel(R) PRO/100 Network Driver [ 0.904808] e100: Copyright(c) 1999-2006 Intel Corporation [ 0.904946] sky2: driver version 1.30 [ 0.905129] xen_netfront: Initialising Xen virtual ethernet driver [ 0.905569] xen: registering gsi 18 triggering 0 polarity 1 [ 0.905580] Already setup the GSI :18 [ 0.905804] ehci-pci 0000:00:1a.0: EHCI Host Controller [ 0.906011] ehci-pci 0000:00:1a.0: new USB bus registered, assigned bus number 1 [ 0.906192] ehci-pci 0000:00:1a.0: debug port 2 [ 0.910333] ehci-pci 0000:00:1a.0: irq 18, io mem 0xfb614000 [ 0.916708] ehci-pci 0000:00:1a.0: USB 2.0 started, EHCI 1.00 [ 0.916945] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 6.01 [ 0.917095] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 0.917246] usb usb1: Product: EHCI Host Controller [ 0.917361] usb usb1: Manufacturer: Linux 6.1.93+ ehci_hcd [ 0.917478] usb usb1: SerialNumber: 0000:00:1a.0 [ 0.917807] hub 1-0:1.0: USB hub found [ 0.917933] hub 1-0:1.0: 2 ports detected [ 0.918308] xen: registering gsi 18 triggering 0 polarity 1 [ 0.918318] Already setup the GSI :18 [ 0.918512] ehci-pci 0000:00:1d.0: EHCI Host Controller [ 0.918733] ehci-pci 0000:00:1d.0: new USB bus registered, assigned bus number 2 [ 0.918911] ehci-pci 0000:00:1d.0: debug port 2 [ 0.923014] ehci-pci 0000:00:1d.0: irq 18, io mem 0xfb613000 [ 0.929685] ehci-pci 0000:00:1d.0: USB 2.0 started, EHCI 1.00 [ 0.929906] usb usb2: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 6.01 [ 0.930055] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 0.930200] usb usb2: Product: EHCI Host Controller [ 0.930315] usb usb2: Manufacturer: Linux 6.1.93+ ehci_hcd [ 0.930431] usb usb2: SerialNumber: 0000:00:1d.0 [ 0.930722] hub 2-0:1.0: USB hub found [ 0.930848] hub 2-0:1.0: 2 ports detected [ 0.931282] xen: registering gsi 19 triggering 0 polarity 1 [ 0.931291] Already setup the GSI :19 [ 0.931496] xhci_hcd 0000:00:14.0: xHCI Host Controller [ 0.931732] xhci_hcd 0000:00:14.0: new USB bus registered, assigned bus number 3 [ 0.932952] xhci_hcd 0000:00:14.0: hcc params 0x200077c1 hci version 0x100 quirks 0x0000000000009810 [ 0.933426] xhci_hcd 0000:00:14.0: xHCI Host Controller [ 0.933627] xhci_hcd 0000:00:14.0: new USB bus registered, assigned bus number 4 [ 0.933785] xhci_hcd 0000:00:14.0: Host supports USB 3.0 SuperSpeed [ 0.934024] usb usb3: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 6.01 [ 0.934173] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 0.934318] usb usb3: Product: xHCI Host Controller [ 0.934433] usb usb3: Manufacturer: Linux 6.1.93+ xhci-hcd [ 0.934549] usb usb3: SerialNumber: 0000:00:14.0 [ 0.934862] hub 3-0:1.0: USB hub found [ 0.934995] hub 3-0:1.0: 8 ports detected [ 0.936114] usb usb4: New USB device found, idVendor=1d6b, idProduct=0003, bcdDevice= 6.01 [ 0.936266] usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 0.936426] usb usb4: Product: xHCI Host Controller [ 0.936543] usb usb4: Manufacturer: Linux 6.1.93+ xhci-hcd [ 0.936677] usb usb4: SerialNumber: 0000:00:14.0 [ 0.936933] hub 4-0:1.0: USB hub found [ 0.937065] hub 4-0:1.0: 6 ports detected [ 0.938170] usbcore: registered new interface driver usblp [ 0.938308] usbcore: registered new interface driver usb-storage [ 0.938457] i8042: PNP: No PS/2 controller found. [ 0.938797] rtc_cmos 00:00: RTC can wake from S4 [ 0.939475] rtc_cmos 00:00: registered as rtc0 [ 0.939656] rtc_cmos 00:00: alarms up to one month, y3k, 114 bytes nvram [ 0.939945] device-mapper: uevent: version 1.0.3 [ 0.940174] device-mapper: ioctl: 4.47.0-ioctl (2022-07-28) initialised: dm-devel@redhat.com [ 0.940196] xen: registering gsi 18 triggering 0 polarity 1 [ 0.940329] intel_pstate: CPU model not supported [ 0.940335] Already setup the GSI :18 [ 0.940351] hid: raw HID events driver (C) Jiri Kosina [ 0.940494] i801_smbus 0000:00:1f.3: SPD Write Disable is set [ 0.940733] usbcore: registered new interface driver usbhid [ 0.940778] Freeing initrd memory: 19884K [ 0.940845] i801_smbus 0000:00:1f.3: SMBus using PCI interrupt [ 0.940935] usbhid: USB HID core driver [ 0.941371] i2c i2c-0: 1/4 memory slots populated (from DMI) [ 0.941756] Initializing XFRM netlink socket [ 0.941966] NET: Registered PF_INET6 protocol family [ 0.942580] Segment Routing with IPv6 [ 0.942722] In-situ OAM (IOAM) with IPv6 [ 0.942869] sit: IPv6, IPv4 and MPLS over IPv4 tunneling driver [ 0.943109] NET: Registered PF_PACKET protocol family [ 0.943267] 9pnet: Installing 9P2000 support [ 0.943394] Key type dns_resolver registered [ 0.944154] IPI shorthand broadcast: enabled [ 0.944294] sched_clock: Marking stable (906484085, 37630592)->(1790018906, -845904229) [ 0.944899] registered taskstats version 1 [ 0.945023] Loading compiled-in X.509 certificates [ 0.947802] PM: Magic number: 12:491:603 [ 0.948039] printk: console [netcon0] enabled [ 0.948155] netconsole: network logging started [ 0.948496] cfg80211: Loading compiled-in X.509 certificates for regulatory database [ 0.960566] cfg80211: Loaded X.509 cert 'sforshee: 00b28ddf47aef9cea7' [ 0.960918] cfg80211: Loaded X.509 cert 'wens: 61c038651aabdcf94bd0ac7ff06c7248db18c600' [ 0.961578] cfg80211: loaded regulatory.db is malformed or signature is missing/invalid [ 0.961785] ALSA device list: [ 0.961907] No soundcards found. [ 1.159769] usb 1-1: new high-speed USB device number 2 using ehci-pci [ 1.167755] usb 2-1: new high-speed USB device number 2 using ehci-pci [ 1.175795] usb 3-3: new high-speed USB device number 2 using xhci_hcd [ 1.212772] ata2: SATA link down (SStatus 0 SControl 300) [ 1.212911] ata5: SATA link down (SStatus 0 SControl 300) [ 1.213065] ata4: SATA link down (SStatus 0 SControl 300) [ 1.213203] ata6: SATA link down (SStatus 0 SControl 300) [ 1.213360] ata1: SATA link down (SStatus 0 SControl 300) [ 1.214088] ata3: SATA link up 6.0 Gbps (SStatus 133 SControl 300) [ 1.215533] ata3.00: ATA-10: HGST HUS722T1TALA604, RAGNWA05, max UDMA/133 [ 1.296024] usb 1-1: New USB device found, idVendor=8087, idProduct=8008, bcdDevice= 0.05 [ 1.296181] usb 1-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0 [ 1.296350] usb 2-1: New USB device found, idVendor=8087, idProduct=8000, bcdDevice= 0.05 [ 1.296499] usb 2-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0 [ 1.296858] hub 1-1:1.0: USB hub found [ 1.296998] hub 2-1:1.0: USB hub found [ 1.297173] hub 1-1:1.0: 4 ports detected [ 1.297294] hub 2-1:1.0: 4 ports detected [ 1.303406] usb 3-3: New USB device found, idVendor=05e3, idProduct=0610, bcdDevice=32.98 [ 1.303528] ata3.00: 1953525168 sectors, multi 16: LBA48 NCQ (depth 32), AA [ 1.303562] usb 3-3: New USB device strings: Mfr=0, Product=1, SerialNumber=0 [ 1.303572] ata3.00: Features: NCQ-sndrcv NCQ-prio [ 1.303582] usb 3-3: Product: USB2.0 Hub [ 1.304776] hub 3-3:1.0: USB hub found [ 1.305246] hub 3-3:1.0: 4 ports detected [ 1.331453] ata3.00: configured for UDMA/133 [ 1.331988] scsi 2:0:0:0: Direct-Access ATA HGST HUS722T1TAL WA05 PQ: 0 ANSI: 5 [ 1.332899] sd 2:0:0:0: Attached scsi generic sg0 type 0 [ 1.332997] sd 2:0:0:0: [sda] 1953525168 512-byte logical blocks: (1.00 TB/932 GiB) [ 1.333242] sd 2:0:0:0: [sda] Write Protect is off [ 1.333375] sd 2:0:0:0: [sda] Mode Sense: 00 3a 00 00 [ 1.333443] sd 2:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 1.333680] sd 2:0:0:0: [sda] Preferred minimum I/O size 512 bytes [ 1.352825] sda: sda1 sda2 < sda5 > [ 1.353305] sd 2:0:0:0: [sda] Attached SCSI disk [ 1.354506] Freeing unused kernel image (initmem) memory: 1580K [ 1.354647] Write protecting the kernel read-only data: 22528k [ 1.372599] Freeing unused kernel image (text/rodata gap) memory: 2032K [ 1.373897] Freeing unused kernel image (rodata/data gap) memory: 1568K [ 1.833343] x86/mm: Checked W+X mappings: passed, no W+X pages found. [ 1.833518] usb 3-4: new high-speed USB device number 3 using xhci_hcd [ 1.833537] Run /init as init process [ 1.833786] with arguments: [ 1.833787] /init [ 1.833788] placeholder [ 1.833790] with environment: [ 1.833791] HOME=/ [ 1.833792] TERM=linux [ 1.959987] usb 3-4: New USB device found, idVendor=0557, idProduct=7000, bcdDevice= 0.00 [ 1.960149] usb 3-4: New USB device strings: Mfr=0, Product=0, SerialNumber=0 [ 1.960848] hub 3-4:1.0: USB hub found [ 1.961063] hub 3-4:1.0: 4 ports detected [ 2.023723] usb 3-3.2: new high-speed USB device number 4 using xhci_hcd [ 2.101158] usb 3-3.2: New USB device found, idVendor=05e3, idProduct=0610, bcdDevice=32.98 [ 2.101318] usb 3-3.2: New USB device strings: Mfr=0, Product=1, SerialNumber=0 [ 2.101469] usb 3-3.2: Product: USB2.0 Hub [ 2.102284] hub 3-3.2:1.0: USB hub found [ 2.102726] hub 3-3.2:1.0: 4 ports detected [ 2.258659] usb 3-4.1: new low-speed USB device number 5 using xhci_hcd [ 2.282663] ixgbe: Intel(R) 10 Gigabit PCI Express Network Driver [ 2.282860] ixgbe: Copyright (c) 1999-2016 Intel Corporation. [ 2.283262] ACPI Warning: \_SB.PCI0.BR2C._PRT: Return Package has no elements (empty) (20220331/nsprepkg-94) [ 2.283494] xen: registering gsi 16 triggering 0 polarity 1 [ 2.283504] Already setup the GSI :16 [ 2.287195] igb: Intel(R) Gigabit Ethernet Network Driver [ 2.287321] igb: Copyright (c) 2007-2014 Intel Corporation. [ 2.287524] xen: registering gsi 16 triggering 0 polarity 1 [ 2.287533] Already setup the GSI :16 [ 2.314245] pps pps0: new PPS source ptp0 [ 2.314423] igb 0000:07:00.0: added PHC on eth0 [ 2.314557] igb 0000:07:00.0: Intel(R) Gigabit Ethernet Network Connection [ 2.314690] igb 0000:07:00.0: eth0: (PCIe:2.5Gb/s:Width x1) 0c:c4:7a:9f:87:be [ 2.314857] igb 0000:07:00.0: eth0: PBA No: 010C00-000 [ 2.314980] igb 0000:07:00.0: Using MSI-X interrupts. 4 rx queue(s), 4 tx queue(s) [ 2.315218] xen: registering gsi 17 triggering 0 polarity 1 [ 2.315226] Already setup the GSI :17 [ 2.344709] pps pps1: new PPS source ptp1 [ 2.344891] igb 0000:08:00.0: added PHC on eth1 [ 2.345025] igb 0000:08:00.0: Intel(R) Gigabit Ethernet Network Connection [ 2.345147] igb 0000:08:00.0: eth1: (PCIe:2.5Gb/s:Width x1) 0c:c4:7a:9f:87:bf [ 2.345313] igb 0000:08:00.0: eth1: PBA No: 010000-000 [ 2.345436] igb 0000:08:00.0: Using MSI-X interrupts. 4 rx queue(s), 4 tx queue(s) [ 2.345695] xen: registering gsi 16 triggering 0 polarity 1 [ 2.345703] Already setup the GSI :16 [ 2.364078] usb 3-4.1: New USB device found, idVendor=0557, idProduct=2419, bcdDevice= 1.00 [ 2.364237] usb 3-4.1: New USB device strings: Mfr=0, Product=0, SerialNumber=0 [ 2.370005] input: HID 0557:2419 as /devices/pci0000:00/0000:00:14.0/usb3/3-4/3-4.1/3-4.1:1.0/0003:0557:2419.0001/input/input2 [ 2.403499] igb 0000:0b:00.0: added PHC on eth2 [ 2.403663] igb 0000:0b:00.0: Intel(R) Gigabit Ethernet Network Connection [ 2.403801] igb 0000:0b:00.0: eth2: (PCIe:5.0Gb/s:Width x4) 0c:c4:7a:9f:87:c0 [ 2.404005] igb 0000:0b:00.0: eth2: PBA No: 010000-000 [ 2.404121] igb 0000:0b:00.0: Using MSI-X interrupts. 8 rx queue(s), 8 tx queue(s) [ 2.404353] xen: registering gsi 17 triggering 0 polarity 1 [ 2.404363] Already setup the GSI :17 [ 2.421921] hid-generic 0003:0557:2419.0001: input,hidraw0: USB HID v1.00 Keyboard [HID 0557:2419] on usb-0000:00:14.0-4.1/input0 [ 2.424832] input: HID 0557:2419 as /devices/pci0000:00/0000:00:14.0/usb3/3-4/3-4.1/3-4.1:1.1/0003:0557:2419.0002/input/input3 [ 2.425141] hid-generic 0003:0557:2419.0002: input,hidraw1: USB HID v1.00 Mouse [HID 0557:2419] on usb-0000:00:14.0-4.1/input1 [ 2.462595] igb 0000:0b:00.1: added PHC on eth3 [ 2.462746] igb 0000:0b:00.1: Intel(R) Gigabit Ethernet Network Connection [ 2.462871] igb 0000:0b:00.1: eth3: (PCIe:5.0Gb/s:Width x4) 0c:c4:7a:9f:87:c1 [ 2.463076] igb 0000:0b:00.1: eth3: PBA No: 010000-000 [ 2.463192] igb 0000:0b:00.1: Using MSI-X interrupts. 8 rx queue(s), 8 tx queue(s) [ 2.463439] xen: registering gsi 18 triggering 0 polarity 1 [ 2.463449] Already setup the GSI :18 [ 2.519180] igb 0000:0b:00.2: added PHC on eth4 [ 2.519325] igb 0000:0b:00.2: Intel(R) Gigabit Ethernet Network Connection [ 2.519447] igb 0000:0b:00.2: eth4: (PCIe:5.0Gb/s:Width x4) 0c:c4:7a:9f:87:c2 [ 2.519655] igb 0000:0b:00.2: eth4: PBA No: 010000-000 [ 2.519790] igb 0000:0b:00.2: Using MSI-X interrupts. 8 rx queue(s), 8 tx queue(s) [ 2.520050] xen: registering gsi 19 triggering 0 polarity 1 [ 2.520059] Already setup the GSI :19 [ 2.577708] igb 0000:0b:00.3: added PHC on eth5 [ 2.577849] igb 0000:0b:00.3: Intel(R) Gigabit Ethernet Network Connection [ 2.577970] igb 0000:0b:00.3: eth5: (PCIe:5.0Gb/s:Width x4) 0c:c4:7a:9f:87:c3 [ 2.578174] igb 0000:0b:00.3: eth5: PBA No: 010000-000 [ 2.578290] igb 0000:0b:00.3: Using MSI-X interrupts. 8 rx queue(s), 8 tx queue(s) [ 2.581168] igb 0000:07:00.0 enx0cc47a9f87be: renamed from eth0 [ 2.596105] igb 0000:0b:00.1 enx0cc47a9f87c1: renamed from eth3 [ 2.605108] igb 0000:08:00.0 enx0cc47a9f87bf: renamed from eth1 [ 2.617914] igb 0000:0b:00.2 enx0cc47a9f87c2: renamed from eth4 [ 2.625856] igb 0000:0b:00.0 enx0cc47a9f87c0: renamed from eth2 [ 2.634869] igb 0000:0b:00.3 enx0cc47a9f87c3: renamed from eth5 [ 3.014024] ixgbe 0000:04:00.0: Multiqueue Enabled: Rx Queue count = 8, Tx Queue count = 8 XDP Queue count = 0 [ 3.148950] ixgbe 0000:04:00.0: MAC: 5, PHY: 0, PBA No: 020B00-000 [ 3.149124] ixgbe 0000:04:00.0: 0c:c4:7a:9f:8f:b6 [ 3.445633] ixgbe 0000:04:00.0: Intel(R) 10 Gigabit Network Connection [ 3.446133] ACPI Warning: \_SB.PCI0.BR2C._PRT: Return Package has no elements (empty) (20220331/nsprepkg-94) [ 3.446352] xen: registering gsi 17 triggering 0 polarity 1 [ 3.446362] Already setup the GSI :17 [ 4.184832] ixgbe 0000:04:00.1: Multiqueue Enabled: Rx Queue count = 8, Tx Queue count = 8 XDP Queue count = 0 [ 4.314654] ixgbe 0000:04:00.1: MAC: 5, PHY: 0, PBA No: 020B00-000 [ 4.314870] ixgbe 0000:04:00.1: 0c:c4:7a:9f:8f:b7 [ 4.605744] ixgbe 0000:04:00.1: Intel(R) 10 Gigabit Network Connection [ 4.608178] ixgbe 0000:04:00.0 enx0cc47a9f8fb6: renamed from eth0 [ 4.616054] ixgbe 0000:04:00.1 enx0cc47a9f8fb7: renamed from eth1 [ 5.020311] EXT4-fs (dm-0): mounting ext3 file system using the ext4 subsystem [ 5.028426] EXT4-fs (dm-0): mounted filesystem with ordered data mode. Quota mode: none. [ 8.463213] EXT4-fs (dm-0): re-mounted. Quota mode: none. [ 9.471955] EXT4-fs (sda1): mounting ext3 file system using the ext4 subsystem [ 9.489826] EXT4-fs (sda1): mounted filesystem with ordered data mode. Quota mode: none. [ 9.584853] Adding 1949692k swap on /dev/mapper/debina0--vg-swap_1. Priority:-2 extents:1 across:1949692k [ 11.136595] xenbr0: port 1(enx0cc47a9f87be) entered blocking state [ 11.136793] xenbr0: port 1(enx0cc47a9f87be) entered disabled state [ 11.136975] device enx0cc47a9f87be entered promiscuous mode [ 14.647296] igb 0000:07:00.0 enx0cc47a9f87be: igb: enx0cc47a9f87be NIC Link is Up 1000 Mbps Full Duplex, Flow Control: RX [ 14.750040] IPv6: ADDRCONF(NETDEV_CHANGE): enx0cc47a9f87be: link becomes ready [ 14.750292] xenbr0: port 1(enx0cc47a9f87be) entered blocking state [ 14.750416] xenbr0: port 1(enx0cc47a9f87be) entered forwarding state [ 14.750711] IPv6: ADDRCONF(NETDEV_CHANGE): xenbr0: link becomes ready