[ 0.000000] Linux version 6.10.0-rc4 (osstest@himrod0) (gcc (Debian 12.2.0-14) 12.2.0, GNU ld (GNU Binutils for Debian) 2.40) #1 SMP PREEMPT_DYNAMIC Mon Jun 17 03:17:01 UTC 2024 [ 0.000000] Command line: placeholder root=/dev/mapper/rimava0--vg-root ro console=hvc0 [ 0.000000] [Firmware Bug]: TSC doesn't count with P0 frequency! [ 0.000000] Released 0 page(s) [ 0.000000] BIOS-provided physical RAM map: [ 0.000000] Xen: [mem 0x0000000000000000-0x0000000000095fff] usable [ 0.000000] Xen: [mem 0x0000000000096000-0x00000000000fffff] reserved [ 0.000000] Xen: [mem 0x0000000000100000-0x0000000020069fff] usable [ 0.000000] Xen: [mem 0x00000000dfe9e000-0x00000000dfe9ffff] type 9 [ 0.000000] Xen: [mem 0x00000000dfea0000-0x00000000dfeb1fff] ACPI data [ 0.000000] Xen: [mem 0x00000000dfeb2000-0x00000000dfedffff] ACPI NVS [ 0.000000] Xen: [mem 0x00000000dfee0000-0x00000000efffffff] reserved [ 0.000000] Xen: [mem 0x00000000fec00000-0x00000000fec00fff] reserved [ 0.000000] Xen: [mem 0x00000000fec20000-0x00000000fec20fff] reserved [ 0.000000] Xen: [mem 0x00000000fee00000-0x00000000feefffff] reserved [ 0.000000] Xen: [mem 0x00000000ffe00000-0x00000000ffffffff] reserved [ 0.000000] Xen: [mem 0x000000fd00000000-0x000000ffffffffff] reserved [ 0.000000] NX (Execute Disable) protection: active [ 0.000000] APIC: Static calls initialized [ 0.000000] SMBIOS 2.6 present. [ 0.000000] DMI: Supermicro H8SCM/H8SCM, BIOS 3.5 11/25/2013 [ 0.000000] DMI: Memory slots populated: 1/4 [ 0.000000] Hypervisor detected: Xen PV [ 0.000013] Xen PV: Detected 6 vCPUS [ 0.037370] tsc: Fast TSC calibration using PIT [ 0.037372] tsc: Detected 3101.151 MHz processor [ 0.037374] tsc: Detected 3101.118 MHz TSC [ 0.037582] e820: update [mem 0x00000000-0x00000fff] usable ==> reserved [ 0.037586] e820: remove [mem 0x000a0000-0x000fffff] usable [ 0.037593] last_pfn = 0x2006a max_arch_pfn = 0x400000000 [ 0.037598] MTRR map: 1 entries (0 fixed + 1 variable; max 16), built from 8 variable MTRRs [ 0.037600] MTRRs set to read-only [ 0.037604] x86/PAT: Configuration [0-7]: WB WT UC- UC WC WP UC UC [ 0.062288] RAMDISK: [mem 0x04000000-0x053b7fff] [ 0.062318] ACPI: Early table checksum verification disabled [ 0.063856] ACPI: RSDP 0x00000000000FA1D0 000024 (v02 ACPIAM) [ 0.063870] ACPI: XSDT 0x00000000DFEA0100 000084 (v01 SMCI 20131125 MSFT 00000097) [ 0.063913] ACPI: FACP 0x00000000DFEA0290 0000F4 (v03 112513 FACP1100 20131125 MSFT 00000097) [ 0.063975] ACPI BIOS Warning (bug): 32/64X length mismatch in FADT/Gpe0Block: 64/32 (20240322/tbfadt-560) [ 0.063987] ACPI: DSDT 0x00000000DFEA0600 005699 (v01 1BA11 1BA11000 00000000 INTL 20051117) [ 0.063999] ACPI: FACS 0x00000000DFEB2000 000040 [ 0.064010] ACPI: FACS 0x00000000DFEB2000 000040 [ 0.064021] ACPI: APIC 0x00000000DFEA0390 0000A4 (v01 112513 APIC1100 20131125 MSFT 00000097) [ 0.064032] ACPI: MCFG 0x00000000DFEA0440 00003C (v01 112513 OEMMCFG 20131125 MSFT 00000097) [ 0.064042] ACPI: OEMB 0x00000000DFEB2040 000075 (v01 112513 OEMB1100 20131125 MSFT 00000097) [ 0.064054] ACPI: HPET 0x00000000DFEAA600 000038 (v01 112513 OEMHPET 20131125 MSFT 00000097) [ 0.064065] ACPI: IVRS 0x00000000DFEAA640 0000B0 (v01 AMD RD890S 00202031 AMD 00000000) [ 0.064075] ACPI: SRAT 0x00000000DFEAA6F0 000108 (v02 AMD AGESA 00000001 AMD 00000001) [ 0.064086] ACPI: SSDT 0x00000000DFEAA800 001158 (v01 A M I POWERNOW 00000001 AMD 00000001) [ 0.064096] ACPI: EINJ 0x00000000DFEAB960 000130 (v01 AMIER AMI_EINJ 20131125 MSFT 00000097) [ 0.064108] ACPI: BERT 0x00000000DFEABAF0 000030 (v01 AMIER AMI_BERT 20131125 MSFT 00000097) [ 0.064118] ACPI: ERST 0x00000000DFEABB20 000210 (v01 AMIER AMI_ERST 20131125 MSFT 00000097) [ 0.064129] ACPI: HEST 0x00000000DFEABD30 0000A8 (v01 AMIER ABC_HEST 20131125 MSFT 00000097) [ 0.064134] ACPI: Reserving FACP table memory at [mem 0xdfea0290-0xdfea0383] [ 0.064136] ACPI: Reserving DSDT table memory at [mem 0xdfea0600-0xdfea5c98] [ 0.064138] ACPI: Reserving FACS table memory at [mem 0xdfeb2000-0xdfeb203f] [ 0.064139] ACPI: Reserving FACS table memory at [mem 0xdfeb2000-0xdfeb203f] [ 0.064141] ACPI: Reserving APIC table memory at [mem 0xdfea0390-0xdfea0433] [ 0.064142] ACPI: Reserving MCFG table memory at [mem 0xdfea0440-0xdfea047b] [ 0.064143] ACPI: Reserving OEMB table memory at [mem 0xdfeb2040-0xdfeb20b4] [ 0.064144] ACPI: Reserving HPET table memory at [mem 0xdfeaa600-0xdfeaa637] [ 0.064145] ACPI: Reserving IVRS table memory at [mem 0xdfeaa640-0xdfeaa6ef] [ 0.064146] ACPI: Reserving SRAT table memory at [mem 0xdfeaa6f0-0xdfeaa7f7] [ 0.064147] ACPI: Reserving SSDT table memory at [mem 0xdfeaa800-0xdfeab957] [ 0.064149] ACPI: Reserving EINJ table memory at [mem 0xdfeab960-0xdfeaba8f] [ 0.064150] ACPI: Reserving BERT table memory at [mem 0xdfeabaf0-0xdfeabb1f] [ 0.064151] ACPI: Reserving ERST table memory at [mem 0xdfeabb20-0xdfeabd2f] [ 0.064152] ACPI: Reserving HEST table memory at [mem 0xdfeabd30-0xdfeabdd7] [ 0.064286] APIC: Switched APIC routing to: Xen PV [ 0.066527] Zone ranges: [ 0.066530] DMA [mem 0x0000000000001000-0x0000000000ffffff] [ 0.066532] DMA32 [mem 0x0000000001000000-0x0000000020069fff] [ 0.066535] Normal empty [ 0.066536] Movable zone start for each node [ 0.066537] Early memory node ranges [ 0.066538] node 0: [mem 0x0000000000001000-0x0000000000095fff] [ 0.066541] node 0: [mem 0x0000000000100000-0x0000000020069fff] [ 0.066544] Initmem setup node 0 [mem 0x0000000000001000-0x0000000020069fff] [ 0.066559] On node 0, zone DMA: 1 pages in unavailable ranges [ 0.066691] On node 0, zone DMA: 106 pages in unavailable ranges [ 0.072353] On node 0, zone DMA32: 32662 pages in unavailable ranges [ 0.072373] p2m virtual area at (____ptrval____), size is 40000000 [ 0.279850] Remapped 106 page(s) [ 0.280368] ACPI: PM-Timer IO Port: 0x808 [ 0.280410] CPU topo: CPU limit of 6 reached. Ignoring further CPUs [ 0.280446] ACPI: LAPIC_NMI (acpi_id[0xff] dfl dfl lint[0x1]) [ 0.280450] ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1]) [ 0.280476] IOAPIC[0]: apic_id 0, version 33, address 0xfec00000, GSI 0-23 [ 0.280485] IOAPIC[1]: apic_id 1, version 33, address 0xfec20000, GSI 24-55 [ 0.280499] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl) [ 0.280505] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 low level) [ 0.280530] ACPI: Using ACPI (MADT) for SMP configuration information [ 0.280536] ACPI: HPET id: 0x8300 base: 0xfed00000 [ 0.280551] CPU topo: Max. logical packages: 1 [ 0.280552] CPU topo: Max. logical dies: 1 [ 0.280553] CPU topo: Max. dies per package: 1 [ 0.280561] CPU topo: Max. threads per core: 1 [ 0.280563] CPU topo: Num. cores per package: 6 [ 0.280564] CPU topo: Num. threads per package: 6 [ 0.280564] CPU topo: Allowing 6 present CPUs plus 0 hotplug CPUs [ 0.280566] CPU topo: Rejected CPUs 2 [ 0.280585] PM: hibernation: Registered nosave memory: [mem 0x00000000-0x00000fff] [ 0.280588] PM: hibernation: Registered nosave memory: [mem 0x00096000-0x000fffff] [ 0.280591] [mem 0x2006a000-0xdfe9dfff] available for PCI devices [ 0.280597] Booting kernel on Xen [ 0.280598] Xen version: 4.19-unstable (preserve-AD) [ 0.280605] clocksource: refined-jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 1910969940391419 ns [ 0.286948] setup_percpu: NR_CPUS:64 nr_cpumask_bits:6 nr_cpu_ids:6 nr_node_ids:1 [ 0.288278] percpu: Embedded 57 pages/cpu s194408 r8192 d30872 u262144 [ 0.288289] pcpu-alloc: s194408 r8192 d30872 u262144 alloc=1*2097152 [ 0.288296] pcpu-alloc: [0] 0 1 2 3 4 5 - - [ 0.288396] xen: PV spinlocks enabled [ 0.288402] PV qspinlock hash table entries: 256 (order: 0, 4096 bytes, linear) [ 0.288406] Kernel command line: placeholder root=/dev/mapper/rimava0--vg-root ro console=hvc0 [ 0.288502] Unknown kernel command line parameters "placeholder", will be passed to user space. [ 0.288571] Dentry cache hash table entries: 65536 (order: 7, 524288 bytes, linear) [ 0.288707] Inode-cache hash table entries: 32768 (order: 6, 262144 bytes, linear) [ 0.288972] Built 1 zonelists, mobility grouping on. Total pages: 131071 [ 0.288979] mem auto-init: stack:all(zero), heap alloc:off, heap free:off, mlocked free:off [ 0.288984] software IO TLB: area num 8. [ 0.428491] Memory: 385988K/524284K available (16384K kernel code, 2753K rwdata, 6164K rodata, 2680K init, 1864K bss, 138044K reserved, 0K cma-reserved) [ 0.428640] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=6, Nodes=1 [ 0.431796] Dynamic Preempt: voluntary [ 0.431941] rcu: Preemptible hierarchical RCU implementation. [ 0.431943] rcu: RCU event tracing is enabled. [ 0.431944] rcu: RCU restricting CPUs from NR_CPUS=64 to nr_cpu_ids=6. [ 0.431947] Trampoline variant of Tasks RCU enabled. [ 0.431949] rcu: RCU calculated value of scheduler-enlistment delay is 100 jiffies. [ 0.431951] rcu: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=6 [ 0.431977] RCU Tasks: Setting shift to 3 and lim to 1 rcu_task_cb_adjust=1. [ 0.438661] NR_IRQS: 4352, nr_irqs: 1016, preallocated irqs: 16 [ 0.438848] xen:events: Using FIFO-based ABI [ 0.438889] xen: --> pirq=1 -> irq=1 (gsi=1) [ 0.438895] xen: --> pirq=2 -> irq=2 (gsi=2) [ 0.438908] xen: --> pirq=3 -> irq=3 (gsi=3) [ 0.438913] xen: --> pirq=4 -> irq=4 (gsi=4) [ 0.438918] xen: --> pirq=5 -> irq=5 (gsi=5) [ 0.438923] xen: --> pirq=6 -> irq=6 (gsi=6) [ 0.438928] xen: --> pirq=7 -> irq=7 (gsi=7) [ 0.438933] xen: --> pirq=8 -> irq=8 (gsi=8) [ 0.438938] xen: --> pirq=9 -> irq=9 (gsi=9) [ 0.438943] xen: --> pirq=10 -> irq=10 (gsi=10) [ 0.438948] xen: --> pirq=11 -> irq=11 (gsi=11) [ 0.438953] xen: --> pirq=12 -> irq=12 (gsi=12) [ 0.438958] xen: --> pirq=13 -> irq=13 (gsi=13) [ 0.438963] xen: --> pirq=14 -> irq=14 (gsi=14) [ 0.438968] xen: --> pirq=15 -> irq=15 (gsi=15) [ 0.438983] rcu: srcu_init: Setting srcu_struct sizes based on contention. [ 0.444997] Console: colour VGA+ 80x25 [ 0.445003] printk: legacy console [tty0] enabled [ 0.458545] printk: legacy console [hvc0] enabled [ 0.459193] ACPI: Core revision 20240322 [ 0.465043] clocksource: xen: mask: 0xffffffffffffffff max_cycles: 0x1cd42e4dffb, max_idle_ns: 881590591483 ns [ 0.465200] Xen: using vcpuop timer interface [ 0.465208] installing Xen timer for CPU 0 [ 0.465459] clocksource: tsc-early: mask: 0xffffffffffffffff max_cycles: 0x2cb3681d801, max_idle_ns: 440795357179 ns [ 0.465626] Calibrating delay loop (skipped), value calculated using timer frequency.. 6202.23 BogoMIPS (lpj=3101118) [ 0.465818] [Firmware Bug]: CPU 0: APIC ID mismatch. CPUID: 0x0000 APIC: 0x0010 [ 0.466035] Last level iTLB entries: 4KB 512, 2MB 1024, 4MB 512 [ 0.466144] Last level dTLB entries: 4KB 1024, 2MB 1024, 4MB 512, 1GB 0 [ 0.466259] Spectre V1 : Mitigation: usercopy/swapgs barriers and __user pointer sanitization [ 0.466640] Spectre V2 : Mitigation: Retpolines [ 0.466742] Spectre V2 : Spectre v2 / SpectreRSB mitigation: Filling RSB on context switch [ 0.466885] Spectre V2 : Spectre v2 / SpectreRSB : Filling RSB on VMEXIT [ 0.466994] Spectre V2 : Enabling Speculation Barrier for firmware calls [ 0.467108] RETBleed: Mitigation: untrained return thunk [ 0.467219] Spectre V2 : mitigation: Enabling conditional Indirect Branch Prediction Barrier [ 0.467363] Speculative Store Bypass: Vulnerable [ 0.467492] x86/fpu: Supporting XSAVE feature 0x001: 'x87 floating point registers' [ 0.467628] x86/fpu: Supporting XSAVE feature 0x002: 'SSE registers' [ 0.467737] x86/fpu: Supporting XSAVE feature 0x004: 'AVX registers' [ 0.467846] x86/fpu: xstate_offset[2]: 576, xstate_sizes[2]: 256 [ 0.467955] x86/fpu: Enabled xstate features 0x7, context size is 832 bytes, using 'standard' format. [ 0.495993] Freeing SMP alternatives memory: 40K [ 0.496147] pid_max: default: 32768 minimum: 301 [ 0.496309] LSM: initializing lsm=capability,selinux [ 0.496432] SELinux: Initializing. [ 0.496601] Mount-cache hash table entries: 1024 (order: 1, 8192 bytes, linear) [ 0.496631] Mountpoint-cache hash table entries: 1024 (order: 1, 8192 bytes, linear) [ 0.497771] cpu 0 spinlock event irq 57 [ 0.497884] VPMU disabled by hypervisor. [ 0.498374] Performance Events: PMU not available due to virtualization, using software events only. [ 0.498631] signal: max sigframe size: 1776 [ 0.498800] rcu: Hierarchical SRCU implementation. [ 0.498905] rcu: Max phase no-delay instances is 400. [ 0.505086] smp: Bringing up secondary CPUs ... [ 0.505428] installing Xen timer for CPU 1 [ 0.505919] installing Xen timer for CPU 2 [ 0.506320] installing Xen timer for CPU 3 [ 0.506743] installing Xen timer for CPU 4 [ 0.507148] installing Xen timer for CPU 5 [ 0.027633] [Firmware Bug]: CPU 1: APIC ID mismatch. CPUID: 0x0001 APIC: 0x0011 [ 0.507638] cpu 1 spinlock event irq 87 [ 0.027633] [Firmware Bug]: CPU 2: APIC ID mismatch. CPUID: 0x0002 APIC: 0x0012 [ 0.507713] cpu 2 spinlock event irq 88 [ 0.027633] [Firmware Bug]: CPU 3: APIC ID mismatch. CPUID: 0x0003 APIC: 0x0013 [ 0.508861] cpu 3 spinlock event irq 89 [ 0.027633] [Firmware Bug]: CPU 4: APIC ID mismatch. CPUID: 0x0004 APIC: 0x0014 [ 0.509675] cpu 4 spinlock event irq 90 [ 0.027633] [Firmware Bug]: CPU 5: APIC ID mismatch. CPUID: 0x0005 APIC: 0x0015 [ 0.511645] cpu 5 spinlock event irq 91 [ 0.512968] smp: Brought up 1 node, 6 CPUs [ 0.513466] devtmpfs: initialized [ 0.513673] x86/mm: Memory block size: 128MB [ 0.514426] ACPI: PM: Registering ACPI NVS region [mem 0xdfeb2000-0xdfedffff] (188416 bytes) [ 0.514704] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 1911260446275000 ns [ 0.514861] futex hash table entries: 2048 (order: 5, 131072 bytes, linear) [ 0.515224] PM: RTC time: 06:17:40, date: 2024-06-17 [ 0.516043] NET: Registered PF_NETLINK/PF_ROUTE protocol family [ 0.516693] xen:grant_table: Grant tables using version 1 layout [ 0.517476] Grant table initialized [ 0.520342] audit: initializing netlink subsys (disabled) [ 0.520779] audit: type=2000 audit(1718605060.213:1): state=initialized audit_enabled=0 res=1 [ 0.521678] thermal_sys: Registered thermal governor 'step_wise' [ 0.521683] thermal_sys: Registered thermal governor 'user_space' [ 0.522736] PCI: ECAM [mem 0xe0000000-0xefffffff] (base 0xe0000000) for domain 0000 [bus 00-ff] [ 0.523038] PCI: ECAM [mem 0xe0000000-0xefffffff] reserved as E820 entry [ 0.596630] PCI: Using configuration type 1 for base access [ 0.596845] kprobes: kprobe jump-optimization is enabled. All kprobes are optimized if possible. [ 0.598677] ACPI: Added _OSI(Module Device) [ 0.598795] ACPI: Added _OSI(Processor Device) [ 0.598895] ACPI: Added _OSI(3.0 _SCP Extensions) [ 0.598998] ACPI: Added _OSI(Processor Aggregator Device) [ 0.606098] ACPI: 2 ACPI AML tables successfully acquired and loaded [ 0.606670] xen: registering gsi 9 triggering 0 polarity 1 [ 0.613954] ACPI: _OSC evaluation for CPUs failed, trying _PDC [ 0.616547] ACPI: Interpreter enabled [ 0.616763] ACPI: PM: (supports S0 S1 S4 S5) [ 0.617133] ACPI: Using IOAPIC for interrupt routing [ 0.617732] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug [ 0.618131] PCI: Using E820 reservations for host bridge windows [ 0.619844] ACPI: Enabled 4 GPEs in block 00 to 1F [ 0.661467] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff]) [ 0.661613] acpi PNP0A08:00: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI HPX-Type3] [ 0.661636] acpi PNP0A08:00: _OSC: OS requested [PME PCIeCapability LTR] [ 0.661747] acpi PNP0A08:00: _OSC: platform willing to grant [PME PCIeCapability LTR] [ 0.661899] acpi PNP0A08:00: _OSC: platform retains control of PCIe features (AE_NOT_FOUND) [ 0.662412] PCI host bridge to bus 0000:00 [ 0.662514] pci_bus 0000:00: root bus resource [io 0x0000-0x0cf7 window] [ 0.662626] pci_bus 0000:00: root bus resource [io 0x0d00-0xffff window] [ 0.662737] pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff window] [ 0.662880] pci_bus 0000:00: root bus resource [mem 0x000d0000-0x000dffff window] [ 0.663021] pci_bus 0000:00: root bus resource [mem 0xf0000000-0xfebfffff window] [ 0.663165] pci_bus 0000:00: root bus resource [bus 00-ff] [ 0.663367] pci 0000:00:00.0: [1002:5a13] type 00 class 0x060000 conventional PCI endpoint [ 0.663936] pci 0000:00:00.2: [1002:5a23] type 00 class 0x080600 conventional PCI endpoint [ 0.664430] pci 0000:00:09.0: [1002:5a1c] type 01 class 0x060400 PCIe Root Port [ 0.664650] pci 0000:00:09.0: PCI bridge to [bus 01] [ 0.664766] pci 0000:00:09.0: bridge window [io 0xd000-0xdfff] [ 0.664881] pci 0000:00:09.0: bridge window [mem 0xfe900000-0xfe9fffff] [ 0.665043] pci 0000:00:09.0: enabling Extended Tags [ 0.665264] pci 0000:00:09.0: PME# supported from D0 D3hot D3cold [ 0.665559] pci 0000:00:0a.0: [1002:5a1d] type 01 class 0x060400 PCIe Root Port [ 0.665700] pci 0000:00:0a.0: PCI bridge to [bus 02] [ 0.665820] pci 0000:00:0a.0: bridge window [io 0xe000-0xefff] [ 0.665938] pci 0000:00:0a.0: bridge window [mem 0xfea00000-0xfeafffff] [ 0.666098] pci 0000:00:0a.0: enabling Extended Tags [ 0.666315] pci 0000:00:0a.0: PME# supported from D0 D3hot D3cold [ 0.666622] pci 0000:00:11.0: [1002:4391] type 00 class 0x010601 conventional PCI endpoint [ 0.667080] pci 0000:00:11.0: BAR 0 [io 0xc000-0xc007] [ 0.667543] pci 0000:00:11.0: BAR 1 [io 0xb000-0xb003] [ 0.667791] pci 0000:00:11.0: BAR 2 [io 0xa000-0xa007] [ 0.668405] pci 0000:00:11.0: BAR 3 [io 0x9000-0x9003] [ 0.668817] pci 0000:00:11.0: BAR 4 [io 0x8000-0x800f] [ 0.669254] pci 0000:00:11.0: BAR 5 [mem 0xfebfbc00-0xfebfbfff] [ 0.671440] pci 0000:00:12.0: [1002:4397] type 00 class 0x0c0310 conventional PCI endpoint [ 0.671911] pci 0000:00:12.0: BAR 0 [mem 0xfebf9000-0xfebf9fff] [ 0.674087] pci 0000:00:12.1: [1002:4398] type 00 class 0x0c0310 conventional PCI endpoint [ 0.674743] pci 0000:00:12.1: BAR 0 [mem 0xfebfa000-0xfebfafff] [ 0.675621] pci 0000:00:12.2: [1002:4396] type 00 class 0x0c0320 conventional PCI endpoint [ 0.675805] pci 0000:00:12.2: BAR 0 [mem 0xfebfb800-0xfebfb8ff] [ 0.676140] pci 0000:00:12.2: supports D1 D2 [ 0.676243] pci 0000:00:12.2: PME# supported from D0 D1 D2 D3hot [ 0.677421] pci 0000:00:13.0: [1002:4397] type 00 class 0x0c0310 conventional PCI endpoint [ 0.677610] pci 0000:00:13.0: BAR 0 [mem 0xfebf7000-0xfebf7fff] [ 0.677911] pci 0000:00:13.1: [1002:4398] type 00 class 0x0c0310 conventional PCI endpoint [ 0.678098] pci 0000:00:13.1: BAR 0 [mem 0xfebf8000-0xfebf8fff] [ 0.679691] pci 0000:00:13.2: [1002:4396] type 00 class 0x0c0320 conventional PCI endpoint [ 0.680342] pci 0000:00:13.2: BAR 0 [mem 0xfebfb400-0xfebfb4ff] [ 0.681404] pci 0000:00:13.2: supports D1 D2 [ 0.681511] pci 0000:00:13.2: PME# supported from D0 D1 D2 D3hot [ 0.681847] pci 0000:00:14.0: [1002:4385] type 00 class 0x0c0500 conventional PCI endpoint [ 0.682579] pci 0000:00:14.1: [1002:439c] type 00 class 0x01018a conventional PCI endpoint [ 0.683213] pci 0000:00:14.1: BAR 0 [io 0x0000-0x0007] [ 0.683417] pci 0000:00:14.1: BAR 1 [io 0x0000-0x0003] [ 0.683548] pci 0000:00:14.1: BAR 2 [io 0x0000-0x0007] [ 0.683648] pci 0000:00:14.1: BAR 3 [io 0x0000-0x0003] [ 0.683781] pci 0000:00:14.1: BAR 4 [io 0xff00-0xff0f] [ 0.683944] pci 0000:00:14.1: BAR 0 [io 0x01f0-0x01f7]: legacy IDE quirk [ 0.684056] pci 0000:00:14.1: BAR 1 [io 0x03f6]: legacy IDE quirk [ 0.684166] pci 0000:00:14.1: BAR 2 [io 0x0170-0x0177]: legacy IDE quirk [ 0.684278] pci 0000:00:14.1: BAR 3 [io 0x0376]: legacy IDE quirk [ 0.684668] pci 0000:00:14.3: [1002:439d] type 00 class 0x060100 conventional PCI endpoint [ 0.685180] pci 0000:00:14.4: [1002:4384] type 01 class 0x060401 conventional PCI bridge [ 0.685432] pci 0000:00:14.4: PCI bridge to [bus 03] (subtractive decode) [ 0.685561] pci 0000:00:14.4: bridge window [mem 0xfdf00000-0xfe7fffff] [ 0.685636] pci 0000:00:14.4: bridge window [mem 0xfc000000-0xfcffffff pref] [ 0.685924] pci 0000:00:14.5: [1002:4399] type 00 class 0x0c0310 conventional PCI endpoint [ 0.686111] pci 0000:00:14.5: BAR 0 [mem 0xfebf6000-0xfebf6fff] [ 0.686523] pci 0000:00:18.0: [1022:1600] type 00 class 0x060000 conventional PCI endpoint [ 0.686861] pci 0000:00:18.1: [1022:1601] type 00 class 0x060000 conventional PCI endpoint [ 0.687177] pci 0000:00:18.2: [1022:1602] type 00 class 0x060000 conventional PCI endpoint [ 0.687499] pci 0000:00:18.3: [1022:1603] type 00 class 0x060000 conventional PCI endpoint [ 0.687831] pci 0000:00:18.4: [1022:1604] type 00 class 0x060000 conventional PCI endpoint [ 0.688221] pci 0000:00:18.5: [1022:1605] type 00 class 0x060000 conventional PCI endpoint [ 0.688704] pci 0000:01:00.0: [8086:10d3] type 00 class 0x020000 PCIe Endpoint [ 0.688895] pci 0000:01:00.0: BAR 0 [mem 0xfe9e0000-0xfe9fffff] [ 0.689066] pci 0000:01:00.0: BAR 2 [io 0xd800-0xd81f] [ 0.689213] pci 0000:01:00.0: BAR 3 [mem 0xfe9dc000-0xfe9dffff] [ 0.689586] pci 0000:01:00.0: PME# supported from D0 D3hot D3cold [ 0.689920] pci 0000:00:09.0: PCI bridge to [bus 01] [ 0.690213] pci 0000:02:00.0: [8086:10d3] type 00 class 0x020000 PCIe Endpoint [ 0.690414] pci 0000:02:00.0: BAR 0 [mem 0xfeae0000-0xfeafffff] [ 0.690646] pci 0000:02:00.0: BAR 2 [io 0xe800-0xe81f] [ 0.690783] pci 0000:02:00.0: BAR 3 [mem 0xfeadc000-0xfeadffff] [ 0.691145] pci 0000:02:00.0: PME# supported from D0 D3hot D3cold [ 0.693677] pci 0000:00:0a.0: PCI bridge to [bus 02] [ 0.693848] pci_bus 0000:03: extended config space not accessible [ 0.694028] pci 0000:03:04.0: [102b:0532] type 00 class 0x030000 conventional PCI endpoint [ 0.694219] pci 0000:03:04.0: BAR 0 [mem 0xfc000000-0xfcffffff pref] [ 0.694652] pci 0000:03:04.0: BAR 1 [mem 0xfdffc000-0xfdffffff] [ 0.694786] pci 0000:03:04.0: BAR 2 [mem 0xfe000000-0xfe7fffff] [ 0.695042] pci 0000:03:04.0: Video device with shadowed ROM at [mem 0x000c0000-0x000dffff] [ 0.695474] pci 0000:00:14.4: PCI bridge to [bus 03] (subtractive decode) [ 0.695606] pci 0000:00:14.4: bridge window [io 0x0000-0x0cf7 window] (subtractive decode) [ 0.695626] pci 0000:00:14.4: bridge window [io 0x0d00-0xffff window] (subtractive decode) [ 0.695772] pci 0000:00:14.4: bridge window [mem 0x000a0000-0x000bffff window] (subtractive decode) [ 0.695919] pci 0000:00:14.4: bridge window [mem 0x000d0000-0x000dffff window] (subtractive decode) [ 0.696075] pci 0000:00:14.4: bridge window [mem 0xf0000000-0xfebfffff window] (subtractive decode) [ 0.696308] pci_bus 0000:00: on NUMA node 0 [ 0.696962] xen: registering gsi 13 triggering 1 polarity 0 [ 0.697500] ACPI: PCI: Interrupt link LNKA configured for IRQ 10 [ 0.697678] ACPI: PCI: Interrupt link LNKB configured for IRQ 11 [ 0.697868] ACPI: PCI: Interrupt link LNKC configured for IRQ 10 [ 0.698062] ACPI: PCI: Interrupt link LNKD configured for IRQ 10 [ 0.698250] ACPI: PCI: Interrupt link LNKE configured for IRQ 7 [ 0.698435] ACPI: PCI: Interrupt link LNKF configured for IRQ 10 [ 0.698632] ACPI: PCI: Interrupt link LNKG configured for IRQ 11 [ 0.698826] ACPI: PCI: Interrupt link LNKH configured for IRQ 10 [ 0.699112] xen:balloon: Initialising balloon driver [ 0.699242] iommu: Default domain type: Translated [ 0.699627] iommu: DMA domain TLB invalidation policy: lazy mode [ 0.699840] SCSI subsystem initialized [ 0.699966] libata version 3.00 loaded. [ 0.699966] ACPI: bus type USB registered [ 0.699966] usbcore: registered new interface driver usbfs [ 0.700062] usbcore: registered new interface driver hub [ 0.700633] usbcore: registered new device driver usb [ 0.700770] pps_core: LinuxPPS API ver. 1 registered [ 0.700874] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti [ 0.701029] PTP clock support registered [ 0.701832] Advanced Linux Sound Architecture Driver Initialized. [ 0.704562] NetLabel: Initializing [ 0.704650] NetLabel: domain hash size = 128 [ 0.704978] NetLabel: protocols = UNLABELED CIPSOv4 CALIPSO [ 0.705451] NetLabel: unlabeled traffic allowed by default [ 0.705862] PCI: Using ACPI for IRQ routing [ 0.768382] PCI: pci_cache_line_size set to 64 bytes [ 0.768849] e820: reserve RAM buffer [mem 0x00096000-0x0009ffff] [ 0.768869] e820: reserve RAM buffer [mem 0x2006a000-0x23ffffff] [ 0.769296] pci 0000:03:04.0: vgaarb: setting as boot VGA device [ 0.769296] pci 0000:03:04.0: vgaarb: bridge control possible [ 0.769534] pci 0000:03:04.0: vgaarb: VGA device added: decodes=io+mem,owns=io+mem,locks=none [ 0.769663] vgaarb: loaded [ 0.771966] clocksource: Switched to clocksource tsc-early [ 0.772266] VFS: Disk quotas dquot_6.6.0 [ 0.772380] VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes) [ 0.772573] hugetlbfs: disabling because there are no supported hugepage sizes [ 0.772573] pnp: PnP ACPI init [ 0.772878] system 00:00: [mem 0xfec20000-0xfec200ff] could not be reserved [ 0.773133] system 00:01: [mem 0xf6000000-0xf6003fff] has been reserved [ 0.773662] xen: registering gsi 8 triggering 1 polarity 0 [ 0.773965] system 00:03: [io 0x0a10-0x0a1f] has been reserved [ 0.774306] system 00:04: [mem 0xfec00000-0xfec00fff] could not be reserved [ 0.774421] system 00:04: [mem 0xfee00000-0xfee00fff] has been reserved [ 0.774942] system 00:05: [io 0x0ca2-0x0ca3] has been reserved [ 0.775054] system 00:05: [io 0x0550-0x0551] has been reserved [ 0.775163] system 00:05: [io 0x04d0-0x04d1] has been reserved [ 0.775271] system 00:05: [io 0x040b] has been reserved [ 0.775407] system 00:05: [io 0x04d6] has been reserved [ 0.775513] system 00:05: [io 0x0c00-0x0c01] has been reserved [ 0.775621] system 00:05: [io 0x0c14] has been reserved [ 0.775744] system 00:05: [io 0x0c50-0x0c51] has been reserved [ 0.775853] system 00:05: [io 0x0c52] has been reserved [ 0.775959] system 00:05: [io 0x0c6c] has been reserved [ 0.776066] system 00:05: [io 0x0c6f] has been reserved [ 0.776174] system 00:05: [io 0x0cd0-0x0cd1] has been reserved [ 0.776282] system 00:05: [io 0x0cd2-0x0cd3] has been reserved [ 0.776390] system 00:05: [io 0x0cd4-0x0cd5] has been reserved [ 0.776498] system 00:05: [io 0x0cd6-0x0cd7] has been reserved [ 0.776607] system 00:05: [io 0x0cd8-0x0cdf] has been reserved [ 0.776732] system 00:05: [io 0x0800-0x089f] has been reserved [ 0.776848] system 00:05: [io 0x0b00-0x0b0f] has been reserved [ 0.776957] system 00:05: [io 0x0b20-0x0b3f] has been reserved [ 0.777066] system 00:05: [io 0x0900-0x090f] has been reserved [ 0.777173] system 00:05: [io 0x0910-0x091f] has been reserved [ 0.777282] system 00:05: [io 0xfe00-0xfefe] has been reserved [ 0.777391] system 00:05: [mem 0xffb80000-0xffbfffff] has been reserved [ 0.777507] system 00:05: [mem 0xfec10000-0xfec1001f] has been reserved [ 0.777618] system 00:05: [mem 0xffe50000-0xffe5e05f] has been reserved [ 0.778031] xen: registering gsi 4 triggering 1 polarity 0 [ 0.778036] Already setup the GSI :4 [ 0.778166] pnp 00:06: [dma 0 disabled] [ 0.778501] xen: registering gsi 3 triggering 1 polarity 0 [ 0.778507] pnp 00:07: [dma 0 disabled] [ 0.778709] system 00:08: [mem 0xe0000000-0xefffffff] has been reserved [ 0.779138] pnp 00:09: disabling [mem 0x000c0000-0x000cffff] because it overlaps 0000:03:04.0 BAR 6 [mem 0x000c0000-0x000dffff] [ 0.779331] system 00:09: [mem 0x00000000-0x0009ffff] could not be reserved [ 0.779448] system 00:09: [mem 0x000e0000-0x000fffff] could not be reserved [ 0.779583] system 00:09: [mem 0x00100000-0xdfffffff] could not be reserved [ 0.779708] system 00:09: [mem 0xfec00000-0xffffffff] could not be reserved [ 0.780004] pnp: PnP ACPI: found 10 devices [ 0.803337] PM-Timer failed consistency check (0xffffff) - aborting. [ 0.803560] NET: Registered PF_INET protocol family [ 0.803802] IP idents hash table entries: 8192 (order: 4, 65536 bytes, linear) [ 0.804265] tcp_listen_portaddr_hash hash table entries: 256 (order: 0, 4096 bytes, linear) [ 0.804423] Table-perturb hash table entries: 65536 (order: 6, 262144 bytes, linear) [ 0.804567] TCP established hash table entries: 4096 (order: 3, 32768 bytes, linear) [ 0.804785] TCP bind hash table entries: 4096 (order: 5, 131072 bytes, linear) [ 0.805004] TCP: Hash tables configured (established 4096 bind 4096) [ 0.805211] UDP hash table entries: 256 (order: 1, 8192 bytes, linear) [ 0.805330] UDP-Lite hash table entries: 256 (order: 1, 8192 bytes, linear) [ 0.805507] NET: Registered PF_UNIX/PF_LOCAL protocol family [ 0.806111] RPC: Registered named UNIX socket transport module. [ 0.806272] RPC: Registered udp transport module. [ 0.806384] RPC: Registered tcp transport module. [ 0.806501] RPC: Registered tcp-with-tls transport module. [ 0.806635] RPC: Registered tcp NFSv4.1 backchannel transport module. [ 0.807471] pci 0000:00:09.0: PCI bridge to [bus 01] [ 0.807601] pci 0000:00:09.0: bridge window [io 0xd000-0xdfff] [ 0.807752] pci 0000:00:09.0: bridge window [mem 0xfe900000-0xfe9fffff] [ 0.807889] pci 0000:00:0a.0: PCI bridge to [bus 02] [ 0.808004] pci 0000:00:0a.0: bridge window [io 0xe000-0xefff] [ 0.808129] pci 0000:00:0a.0: bridge window [mem 0xfea00000-0xfeafffff] [ 0.808280] pci 0000:00:14.4: PCI bridge to [bus 03] [ 0.808414] pci 0000:00:14.4: bridge window [mem 0xfdf00000-0xfe7fffff] [ 0.808581] pci 0000:00:14.4: bridge window [mem 0xfc000000-0xfcffffff pref] [ 0.808751] pci_bus 0000:00: resource 4 [io 0x0000-0x0cf7 window] [ 0.808864] pci_bus 0000:00: resource 5 [io 0x0d00-0xffff window] [ 0.808976] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff window] [ 0.809093] pci_bus 0000:00: resource 7 [mem 0x000d0000-0x000dffff window] [ 0.809211] pci_bus 0000:00: resource 8 [mem 0xf0000000-0xfebfffff window] [ 0.809328] pci_bus 0000:01: resource 0 [io 0xd000-0xdfff] [ 0.809441] pci_bus 0000:01: resource 1 [mem 0xfe900000-0xfe9fffff] [ 0.809559] pci_bus 0000:02: resource 0 [io 0xe000-0xefff] [ 0.809678] pci_bus 0000:02: resource 1 [mem 0xfea00000-0xfeafffff] [ 0.809798] pci_bus 0000:03: resource 1 [mem 0xfdf00000-0xfe7fffff] [ 0.809953] pci_bus 0000:03: resource 2 [mem 0xfc000000-0xfcffffff pref] [ 0.810070] pci_bus 0000:03: resource 4 [io 0x0000-0x0cf7 window] [ 0.810192] pci_bus 0000:03: resource 5 [io 0x0d00-0xffff window] [ 0.810319] pci_bus 0000:03: resource 6 [mem 0x000a0000-0x000bffff window] [ 0.810449] pci_bus 0000:03: resource 7 [mem 0x000d0000-0x000dffff window] [ 0.810576] pci_bus 0000:03: resource 8 [mem 0xf0000000-0xfebfffff window] [ 0.810890] xen: registering gsi 16 triggering 0 polarity 1 [ 0.810937] xen: --> pirq=16 -> irq=16 (gsi=16) [ 1.460840] pci 0000:00:12.0: quirk_usb_early_handoff+0x0/0x7c0 took 634815 usecs [ 1.461070] xen: registering gsi 16 triggering 0 polarity 1 [ 1.461086] Already setup the GSI :16 [ 1.485898] pci 0000:00:12.1: quirk_usb_early_handoff+0x0/0x7c0 took 24300 usecs [ 1.486156] xen: registering gsi 17 triggering 0 polarity 1 [ 1.486347] xen: --> pirq=17 -> irq=17 (gsi=17) [ 1.486572] xen: registering gsi 18 triggering 0 polarity 1 [ 1.486595] xen: --> pirq=18 -> irq=18 (gsi=18) [ 1.510922] pci 0000:00:13.0: quirk_usb_early_handoff+0x0/0x7c0 took 23829 usecs [ 1.511181] xen: registering gsi 18 triggering 0 polarity 1 [ 1.511197] Already setup the GSI :18 [ 1.535989] pci 0000:00:13.1: quirk_usb_early_handoff+0x0/0x7c0 took 24281 usecs [ 1.536260] xen: registering gsi 19 triggering 0 polarity 1 [ 1.536338] xen: --> pirq=19 -> irq=19 (gsi=19) [ 1.536541] xen: registering gsi 18 triggering 0 polarity 1 [ 1.536545] Already setup the GSI :18 [ 1.560851] pci 0000:00:14.5: quirk_usb_early_handoff+0x0/0x7c0 took 23793 usecs [ 1.561069] PCI: CLS 64 bytes, default 64 [ 1.561279] PCI-DMA: Using software bounce buffering for IO (SWIOTLB) [ 1.561401] software IO TLB: mapped [mem 0x000000001b200000-0x000000001f200000] (64MB) [ 1.561545] Unpacking initramfs... [ 1.561602] kvm_intel: VMX not supported by CPU 0 [ 1.562055] kvm_amd: SVM not supported by CPU 0 [ 1.562496] clocksource: tsc: mask: 0xffffffffffffffff max_cycles: 0x2cb3681d801, max_idle_ns: 440795357179 ns [ 1.562885] clocksource: Switched to clocksource tsc [ 1.569530] Initialise system trusted keyrings [ 1.570088] workingset: timestamp_bits=62 max_order=17 bucket_order=0 [ 1.570914] NFS: Registering the id_resolver key type [ 1.571044] Key type id_resolver registered [ 1.571145] Key type id_legacy registered [ 1.571539] 9p: Installing v9fs 9p2000 file system support [ 1.596204] Key type asymmetric registered [ 1.596364] Asymmetric key parser 'x509' registered [ 1.596574] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 251) [ 1.596758] io scheduler mq-deadline registered [ 1.596864] io scheduler kyber registered [ 1.598089] xen: registering gsi 53 triggering 0 polarity 1 [ 1.598160] xen: --> pirq=53 -> irq=53 (gsi=53) [ 1.598503] xen: registering gsi 54 triggering 0 polarity 1 [ 1.598520] xen: --> pirq=54 -> irq=54 (gsi=54) [ 1.598986] input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input0 [ 1.599186] ACPI: button: Power Button [PWRB] [ 1.599337] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input1 [ 1.599567] ACPI: button: Power Button [PWRF] [ 1.602606] ACPI: \_PR_.P001: Found 2 idle states [ 1.604308] ACPI: \_PR_.P002: Found 2 idle states [ 1.604474] ACPI: \_PR_.P003: Found 2 idle states [ 1.604682] ACPI: \_PR_.P004: Found 2 idle states [ 1.604882] ACPI: \_PR_.P005: Found 2 idle states [ 1.605073] ACPI: \_PR_.P006: Found 2 idle states [ 1.606997] xen:xen_evtchn: Event-channel device installed [ 1.608502] xen_pciback: backend is vpci [ 1.611738] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled [ 1.612216] 00:07: ttyS1 at I/O 0x2f8 (irq = 3, base_baud = 115200) is a 16550A [ 1.613247] hpet_acpi_add: no address or irqs in _CRS [ 1.613443] Non-volatile memory driver v1.3 [ 1.627025] loop: module loaded [ 1.655096] ahci 0000:00:11.0: version 3.0 [ 1.655904] xen: registering gsi 22 triggering 0 polarity 1 [ 1.656098] xen: --> pirq=22 -> irq=22 (gsi=22) [ 1.656625] ahci 0000:00:11.0: AHCI vers 0001.0100, 32 command slots, 3 Gbps, SATA mode [ 1.657186] ahci 0000:00:11.0: 4/4 ports implemented (port mask 0xf) [ 1.657561] ahci 0000:00:11.0: flags: 64bit ncq sntf ilck pm led clo pmp pio slum part ccc [ 1.666013] scsi host0: ahci [ 1.667062] scsi host1: ahci [ 1.667860] scsi host2: ahci [ 1.668577] scsi host3: ahci [ 1.668752] ata1: SATA max UDMA/133 abar m1024@0xfebfbc00 port 0xfebfbd00 irq 22 lpm-pol 0 [ 1.668905] ata2: SATA max UDMA/133 abar m1024@0xfebfbc00 port 0xfebfbd80 irq 22 lpm-pol 0 [ 1.669059] ata3: SATA max UDMA/133 abar m1024@0xfebfbc00 port 0xfebfbe00 irq 22 lpm-pol 0 [ 1.669205] ata4: SATA max UDMA/133 abar m1024@0xfebfbc00 port 0xfebfbe80 irq 22 lpm-pol 0 [ 1.669906] tun: Universal TUN/TAP device driver, 1.6 [ 1.670450] e100: Intel(R) PRO/100 Network Driver [ 1.670597] e100: Copyright(c) 1999-2006 Intel Corporation [ 1.670730] sky2: driver version 1.30 [ 1.670919] xen_netfront: Initialising Xen virtual ethernet driver [ 1.671491] xen: registering gsi 16 triggering 0 polarity 1 [ 1.671509] Already setup the GSI :16 [ 1.671673] ohci-pci 0000:00:12.0: OHCI PCI host controller [ 1.672004] ohci-pci 0000:00:12.0: new USB bus registered, assigned bus number 1 [ 1.672284] ohci-pci 0000:00:12.0: irq 16, io mem 0xfebf9000 [ 1.672855] xen: registering gsi 19 triggering 0 polarity 1 [ 1.672862] Already setup the GSI :19 [ 1.673121] xen: registering gsi 17 triggering 0 polarity 1 [ 1.673161] Already setup the GSI :17 [ 1.727844] usb usb1: New USB device found, idVendor=1d6b, idProduct=0001, bcdDevice= 6.10 [ 1.728035] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 1.728179] usb usb1: Product: OHCI PCI host controller [ 1.728287] usb usb1: Manufacturer: Linux 6.10.0-rc4 ohci_hcd [ 1.728402] usb usb1: SerialNumber: 0000:00:12.0 [ 1.729316] hub 1-0:1.0: USB hub found [ 1.729435] hub 1-0:1.0: 3 ports detected [ 1.729977] ehci-pci 0000:00:13.2: EHCI Host Controller [ 1.730006] xen: registering gsi 16 triggering 0 polarity 1 [ 1.730153] Already setup the GSI :16 [ 1.730631] ehci-pci 0000:00:13.2: new USB bus registered, assigned bus number 2 [ 1.731139] ehci-pci 0000:00:13.2: applying AMD SB700/SB800/Hudson-2/3 EHCI dummy qh workaround [ 1.731838] ehci-pci 0000:00:13.2: debug port 1 [ 1.732917] ehci-pci 0000:00:13.2: irq 19, io mem 0xfebfb400 [ 1.739740] ehci-pci 0000:00:13.2: USB 2.0 started, EHCI 1.00 [ 1.740507] usb usb2: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 6.10 [ 1.740758] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 1.740910] usb usb2: Product: EHCI Host Controller [ 1.741016] usb usb2: Manufacturer: Linux 6.10.0-rc4 ehci_hcd [ 1.741125] usb usb2: SerialNumber: 0000:00:13.2 [ 1.742286] hub 2-0:1.0: USB hub found [ 1.742883] hub 2-0:1.0: 6 ports detected [ 1.769539] Freeing initrd memory: 20192K [ 1.795293] ehci-pci 0000:00:12.2: EHCI Host Controller [ 1.795721] ehci-pci 0000:00:12.2: new USB bus registered, assigned bus number 3 [ 1.795870] ehci-pci 0000:00:12.2: applying AMD SB700/SB800/Hudson-2/3 EHCI dummy qh workaround [ 1.796041] ehci-pci 0000:00:12.2: debug port 1 [ 1.796366] ehci-pci 0000:00:12.2: irq 17, io mem 0xfebfb800 [ 1.802672] ehci-pci 0000:00:12.2: USB 2.0 started, EHCI 1.00 [ 1.803110] usb usb3: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 6.10 [ 1.803295] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 1.803437] usb usb3: Product: EHCI Host Controller [ 1.803542] usb usb3: Manufacturer: Linux 6.10.0-rc4 ehci_hcd [ 1.803675] usb usb3: SerialNumber: 0000:00:12.2 [ 1.804152] hub 3-0:1.0: USB hub found [ 1.804290] hub 3-0:1.0: 6 ports detected [ 1.856885] hub 1-0:1.0: USB hub found [ 1.857136] hub 1-0:1.0: 3 ports detected [ 1.857965] ohci-pci 0000:00:12.1: OHCI PCI host controller [ 1.859084] ohci-pci 0000:00:12.1: new USB bus registered, assigned bus number 4 [ 1.859829] ohci-pci 0000:00:12.1: irq 16, io mem 0xfebfa000 [ 1.916371] usb usb4: New USB device found, idVendor=1d6b, idProduct=0001, bcdDevice= 6.10 [ 1.916920] usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 1.917281] usb usb4: Product: OHCI PCI host controller [ 1.917580] usb usb4: Manufacturer: Linux 6.10.0-rc4 ohci_hcd [ 1.918007] usb usb4: SerialNumber: 0000:00:12.1 [ 1.919408] hub 4-0:1.0: USB hub found [ 1.919902] hub 4-0:1.0: 3 ports detected [ 1.920793] xen: registering gsi 18 triggering 0 polarity 1 [ 1.920804] Already setup the GSI :18 [ 1.920958] ohci-pci 0000:00:13.0: OHCI PCI host controller [ 1.921282] ohci-pci 0000:00:13.0: new USB bus registered, assigned bus number 5 [ 1.921569] ohci-pci 0000:00:13.0: irq 18, io mem 0xfebf7000 [ 1.975978] ata3: SATA link down (SStatus 0 SControl 300) [ 1.976461] ata4: SATA link down (SStatus 0 SControl 300) [ 1.978366] usb usb5: New USB device found, idVendor=1d6b, idProduct=0001, bcdDevice= 6.10 [ 1.978524] usb usb5: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 1.978679] usb usb5: Product: OHCI PCI host controller [ 1.978816] usb usb5: Manufacturer: Linux 6.10.0-rc4 ohci_hcd [ 1.978925] usb usb5: SerialNumber: 0000:00:13.0 [ 1.979464] hub 5-0:1.0: USB hub found [ 1.979608] hub 5-0:1.0: 3 ports detected [ 1.980254] xen: registering gsi 18 triggering 0 polarity 1 [ 1.980269] Already setup the GSI :18 [ 1.980520] ohci-pci 0000:00:13.1: OHCI PCI host controller [ 1.980816] ohci-pci 0000:00:13.1: new USB bus registered, assigned bus number 6 [ 1.981027] ohci-pci 0000:00:13.1: irq 18, io mem 0xfebf8000 [ 2.037025] usb usb6: New USB device found, idVendor=1d6b, idProduct=0001, bcdDevice= 6.10 [ 2.037204] usb usb6: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 2.037346] usb usb6: Product: OHCI PCI host controller [ 2.037457] usb usb6: Manufacturer: Linux 6.10.0-rc4 ohci_hcd [ 2.037569] usb usb6: SerialNumber: 0000:00:13.1 [ 2.038233] hub 6-0:1.0: USB hub found [ 2.038402] hub 6-0:1.0: 3 ports detected [ 2.039043] xen: registering gsi 18 triggering 0 polarity 1 [ 2.039058] Already setup the GSI :18 [ 2.039262] ohci-pci 0000:00:14.5: OHCI PCI host controller [ 2.039608] ohci-pci 0000:00:14.5: new USB bus registered, assigned bus number 7 [ 2.039829] ohci-pci 0000:00:14.5: irq 18, io mem 0xfebf6000 [ 2.096149] usb usb7: New USB device found, idVendor=1d6b, idProduct=0001, bcdDevice= 6.10 [ 2.096335] usb usb7: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 2.096486] usb usb7: Product: OHCI PCI host controller [ 2.096600] usb usb7: Manufacturer: Linux 6.10.0-rc4 ohci_hcd [ 2.096717] usb usb7: SerialNumber: 0000:00:14.5 [ 2.097386] hub 7-0:1.0: USB hub found [ 2.097549] hub 7-0:1.0: 2 ports detected [ 2.098149] usbcore: registered new interface driver usblp [ 2.098286] usbcore: registered new interface driver usb-storage [ 2.098445] i8042: PNP: No PS/2 controller found. [ 2.098548] i8042: Probing ports directly. [ 2.102174] serio: i8042 KBD port at 0x60,0x64 irq 1 [ 2.102297] serio: i8042 AUX port at 0x60,0x64 irq 12 [ 2.103389] rtc_cmos 00:02: RTC can wake from S4 [ 2.105712] rtc_cmos 00:02: registered as rtc0 [ 2.105877] rtc_cmos 00:02: alarms up to one month, y3k, 114 bytes nvram [ 2.106120] device-mapper: uevent: version 1.0.3 [ 2.106339] device-mapper: ioctl: 4.48.0-ioctl (2023-03-01) initialised: dm-devel@lists.linux.dev [ 2.106496] amd_pstate: the _CPC object is not present in SBIOS or ACPI disabled [ 2.106675] hid: raw HID events driver (C) Jiri Kosina [ 2.107023] usbcore: registered new interface driver usbhid [ 2.107130] usbhid: USB HID core driver [ 2.107786] Initializing XFRM netlink socket [ 2.107912] NET: Registered PF_INET6 protocol family [ 2.108479] Segment Routing with IPv6 [ 2.108592] In-situ OAM (IOAM) with IPv6 [ 2.108744] sit: IPv6, IPv4 and MPLS over IPv4 tunneling driver [ 2.109044] NET: Registered PF_PACKET protocol family [ 2.109217] 9pnet: Installing 9P2000 support [ 2.109384] Key type dns_resolver registered [ 2.109511] x86/pm: family 0x15 cpu detected, MSR saving is needed during suspending. [ 2.110660] IPI shorthand broadcast: enabled [ 2.115221] sched_clock: Marking stable (2088003316, 26633001)->(2130819199, -16182882) [ 2.115892] Timer migration: 1 hierarchy levels; 8 children per group; 1 crossnode level [ 2.116515] registered taskstats version 1 [ 2.116687] Loading compiled-in X.509 certificates [ 2.120498] PM: Magic number: 12:630:266 [ 2.120770] printk: legacy console [netcon0] enabled [ 2.120878] netconsole: network logging started [ 2.121170] cfg80211: Loading compiled-in X.509 certificates for regulatory database [ 2.129734] ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300) [ 2.129912] ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300) [ 2.131606] ata1.00: ATA-8: WDC WD1003FBYZ-010FB0, 01.01V03, max UDMA/133 [ 2.132070] ata1.00: 1953525168 sectors, multi 0: LBA48 NCQ (depth 32), AA [ 2.132964] ata2.00: ATAPI: ATAPI iHAS124 E, 4L07, max UDMA/100 [ 2.133863] ata1.00: configured for UDMA/133 [ 2.134004] ata2.00: configured for UDMA/100 [ 2.134314] scsi 0:0:0:0: Direct-Access ATA WDC WD1003FBYZ-0 1V03 PQ: 0 ANSI: 5 [ 2.135478] sd 0:0:0:0: Attached scsi generic sg0 type 0 [ 2.135656] sd 0:0:0:0: [sda] 1953525168 512-byte logical blocks: (1.00 TB/932 GiB) [ 2.135846] sd 0:0:0:0: [sda] Write Protect is off [ 2.135955] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00 [ 2.136013] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 2.136606] sd 0:0:0:0: [sda] Preferred minimum I/O size 512 bytes [ 2.136838] scsi 1:0:0:0: CD-ROM ATAPI iHAS124 E 4L07 PQ: 0 ANSI: 5 [ 2.147419] Loaded X.509 cert 'sforshee: 00b28ddf47aef9cea7' [ 2.147904] Loaded X.509 cert 'wens: 61c038651aabdcf94bd0ac7ff06c7248db18c600' [ 2.148083] ALSA device list: [ 2.148183] No soundcards found. [ 2.149100] cfg80211: loaded regulatory.db is malformed or signature is missing/invalid [ 2.163458] sda: sda1 sda2 < sda5 > [ 2.164153] sd 0:0:0:0: [sda] Attached SCSI disk [ 2.177389] sr 1:0:0:0: [sr0] scsi3-mmc drive: 48x/48x writer dvd-ram cd/rw xa/form2 cdda tray [ 2.177581] cdrom: Uniform CD-ROM driver Revision: 3.20 [ 2.194728] sr 1:0:0:0: Attached scsi CD-ROM sr0 [ 2.195107] sr 1:0:0:0: Attached scsi generic sg1 type 5 [ 2.204603] Freeing unused kernel image (initmem) memory: 2680K [ 2.205110] Write protecting the kernel read-only data: 24576k [ 2.281719] usb 6-2: new full-speed USB device number 2 using ohci-pci [ 2.310971] Freeing unused kernel image (rodata/data gap) memory: 2028K [ 2.437212] x86/mm: Checked W+X mappings: passed, no W+X pages found. [ 2.437709] Run /init as init process [ 2.437885] with arguments: [ 2.437888] /init [ 2.437891] placeholder [ 2.437894] with environment: [ 2.437895] HOME=/ [ 2.437896] TERM=linux [ 2.444767] usb 6-2: New USB device found, idVendor=0557, idProduct=2221, bcdDevice= 0.01 [ 2.444930] usb 6-2: New USB device strings: Mfr=1, Product=2, SerialNumber=0 [ 2.445050] usb 6-2: Product: Hermon USB hidmouse Device [ 2.445165] usb 6-2: Manufacturer: Winbond Electronics Corp [ 2.451283] input: Winbond Electronics Corp Hermon USB hidmouse Device as /devices/pci0000:00/0000:00:13.1/usb6/6-2/6-2:1.0/0003:0557:2221.0001/input/input5 [ 2.451724] hid-generic 0003:0557:2221.0001: input,hidraw0: USB HID v1.00 Mouse [Winbond Electronics Corp Hermon USB hidmouse Device] on usb-0000:00:13.1-2/input0 [ 2.455277] input: Winbond Electronics Corp Hermon USB hidmouse Device as /devices/pci0000:00/0000:00:13.1/usb6/6-2/6-2:1.1/0003:0557:2221.0002/input/input6 [ 2.507143] hid-generic 0003:0557:2221.0002: input,hidraw1: USB HID v1.00 Keyboard [Winbond Electronics Corp Hermon USB hidmouse Device] on usb-0000:00:13.1-2/input1 [ 2.757520] e1000e: Intel(R) PRO/1000 Network Driver [ 2.757672] e1000e: Copyright(c) 1999 - 2015 Intel Corporation. [ 2.758085] xen: registering gsi 48 triggering 0 polarity 1 [ 2.758129] xen: --> pirq=48 -> irq=48 (gsi=48) [ 2.758346] e1000e 0000:01:00.0: Interrupt Throttling Rate (ints/sec) set to dynamic conservative mode [ 2.804484] e1000e 0000:01:00.0 0000:01:00.0 (uninitialized): registered PHC clock [ 2.848457] e1000e 0000:01:00.0 eth0: (PCI Express:2.5GT/s:Width x1) 0c:c4:7a:0a:49:2e [ 2.848608] e1000e 0000:01:00.0 eth0: Intel(R) PRO/1000 Network Connection [ 2.848805] e1000e 0000:01:00.0 eth0: MAC: 3, PHY: 8, PBA No: 0101FF-0FF [ 2.849010] xen: registering gsi 47 triggering 0 polarity 1 [ 2.849035] xen: --> pirq=47 -> irq=47 (gsi=47) [ 2.849215] e1000e 0000:02:00.0: Interrupt Throttling Rate (ints/sec) set to dynamic conservative mode [ 2.895726] e1000e 0000:02:00.0 0000:02:00.0 (uninitialized): registered PHC clock [ 2.942763] e1000e 0000:02:00.0 eth1: (PCI Express:2.5GT/s:Width x1) 0c:c4:7a:0a:49:2f [ 2.942926] e1000e 0000:02:00.0 eth1: Intel(R) PRO/1000 Network Connection [ 2.943114] e1000e 0000:02:00.0 eth1: MAC: 3, PHY: 8, PBA No: 0101FF-0FF [ 2.945029] e1000e 0000:01:00.0 enx0cc47a0a492e: renamed from eth0 [ 2.945400] e1000e 0000:02:00.0 enx0cc47a0a492f: renamed from eth1 [ 3.128666] random: crng init done [ 3.688494] EXT4-fs (dm-0): mounting ext3 file system using the ext4 subsystem [ 3.698374] EXT4-fs (dm-0): mounted filesystem 6d25e4c7-f722-42be-8fd7-52e39e6881d4 ro with ordered data mode. Quota mode: none. [ 7.756602] EXT4-fs (dm-0): re-mounted 6d25e4c7-f722-42be-8fd7-52e39e6881d4 r/w. Quota mode: none. [ 8.721811] EXT4-fs (sda1): mounting ext3 file system using the ext4 subsystem [ 8.744521] EXT4-fs (sda1): mounted filesystem a4852c20-1adc-4de2-a5d4-895ba8441953 r/w with ordered data mode. Quota mode: none. [ 8.821162] Adding 1949692k swap on /dev/mapper/rimava0--vg-swap_1. Priority:-2 extents:1 across:1949692k [ 10.400985] xenbr0: port 1(enx0cc47a0a492e) entered blocking state [ 10.401161] xenbr0: port 1(enx0cc47a0a492e) entered disabled state [ 10.401276] e1000e 0000:01:00.0 enx0cc47a0a492e: entered allmulticast mode [ 10.401429] e1000e 0000:01:00.0 enx0cc47a0a492e: entered promiscuous mode [ 13.548680] e1000e 0000:01:00.0 enx0cc47a0a492e: NIC Link is Up 1000 Mbps Full Duplex, Flow Control: None [ 13.549221] xenbr0: port 1(enx0cc47a0a492e) entered blocking state [ 13.549331] xenbr0: port 1(enx0cc47a0a492e) entered forwarding state