[ 0.000000] Linux version 6.10.0-rc4+ (osstest@himrod2) (gcc (Debian 12.2.0-14) 12.2.0, GNU ld (GNU Binutils for Debian) 2.40) #1 SMP PREEMPT_DYNAMIC Mon Jun 17 20:11:02 UTC 2024 [ 0.000000] Command line: placeholder root=/dev/mapper/debina1--vg-root ro console=hvc0 [ 0.000000] Released 0 page(s) [ 0.000000] BIOS-provided physical RAM map: [ 0.000000] Xen: [mem 0x0000000000000000-0x0000000000099fff] usable [ 0.000000] Xen: [mem 0x000000000009ac00-0x00000000000fffff] reserved [ 0.000000] Xen: [mem 0x0000000000100000-0x0000000020065fff] usable [ 0.000000] Xen: [mem 0x00000000796ef000-0x00000000798bdfff] reserved [ 0.000000] Xen: [mem 0x00000000799b7000-0x0000000079e5afff] ACPI NVS [ 0.000000] Xen: [mem 0x0000000079e5b000-0x000000007bdb0fff] reserved [ 0.000000] Xen: [mem 0x000000007bdb2000-0x000000007be37fff] reserved [ 0.000000] Xen: [mem 0x0000000080000000-0x000000008fffffff] reserved [ 0.000000] Xen: [mem 0x00000000fbffc000-0x00000000fbffcfff] reserved [ 0.000000] Xen: [mem 0x00000000fec00000-0x00000000fec00fff] reserved [ 0.000000] Xen: [mem 0x00000000fed1c000-0x00000000fed1ffff] reserved [ 0.000000] Xen: [mem 0x00000000fee00000-0x00000000feefffff] reserved [ 0.000000] Xen: [mem 0x00000000ff000000-0x00000000ffffffff] reserved [ 0.000000] NX (Execute Disable) protection: active [ 0.000000] APIC: Static calls initialized [ 0.000000] SMBIOS 2.8 present. [ 0.000000] DMI: Supermicro SYS-5018D-FN8T/X10SDV-TP8F, BIOS 1.0b 11/21/2016 [ 0.000000] DMI: Memory slots populated: 1/4 [ 0.000000] Hypervisor detected: Xen PV [ 0.000029] Xen PV: Detected 8 vCPUS [ 0.000486] tsc: Detected 2200.000 MHz processor [ 0.000920] e820: update [mem 0x00000000-0x00000fff] usable ==> reserved [ 0.000923] e820: remove [mem 0x000a0000-0x000fffff] usable [ 0.000930] last_pfn = 0x20066 max_arch_pfn = 0x400000000 [ 0.000933] MTRR map: 2 entries (0 fixed + 2 variable; max 20), built from 10 variable MTRRs [ 0.000934] MTRRs set to read-only [ 0.000938] x86/PAT: Configuration [0-7]: WB WT UC- UC WC WP UC UC [ 0.000979] Kernel/User page tables isolation: disabled on XEN PV. [ 0.026772] RAMDISK: [mem 0x04000000-0x053a5fff] [ 0.026781] ACPI: Early table checksum verification disabled [ 0.027381] ACPI: RSDP 0x00000000000F0580 000024 (v02 SUPERM) [ 0.027392] ACPI: XSDT 0x00000000799FF0A0 0000BC (v01 SUPERM SMCI--MB 01072009 AMI 00010013) [ 0.027429] ACPI: FACP 0x0000000079A17AC8 00010C (v05 SUPERM SMCI--MB 01072009 AMI 00010013) [ 0.027477] ACPI: DSDT 0x00000000799FF1F0 0188D5 (v02 SUPERM SMCI--MB 01072009 INTL 20091013) [ 0.027493] ACPI: FACS 0x0000000079E59F80 000040 [ 0.027508] ACPI: APIC 0x0000000079A17BD8 0000BC (v03 SUPERM SMCI--MB 01072009 AMI 00010013) [ 0.027525] ACPI: FPDT 0x0000000079A17C98 000044 (v01 SUPERM SMCI--MB 01072009 AMI 00010013) [ 0.027541] ACPI: FIDT 0x0000000079A17CE0 00009C (v01 SUPERM SMCI--MB 01072009 AMI 00010013) [ 0.027556] ACPI: SPMI 0x0000000079A17D80 000040 (v05 SUPERM SMCI--MB 00000000 AMI. 00000000) [ 0.027572] ACPI: MCFG 0x0000000079A17DC0 00003C (v01 SUPERM SMCI--MB 01072009 MSFT 00000097) [ 0.027588] ACPI: UEFI 0x0000000079A17E00 000042 (v01 00000000 00000000) [ 0.027604] ACPI: DBG2 0x0000000079A17E48 000072 (v00 SUPERM SMCI--MB 00000000 INTL 20091013) [ 0.027620] ACPI: HPET 0x0000000079A17EC0 000038 (v01 SUPERM SMCI--MB 00000001 INTL 20091013) [ 0.027636] ACPI: WDDT 0x0000000079A17EF8 000040 (v01 SUPERM SMCI--MB 00000000 INTL 20091013) [ 0.027653] ACPI: SSDT 0x0000000079A17F38 00ED8B (v01 AMI PmMgt 00000001 INTL 20120913) [ 0.027669] ACPI: SSDT 0x0000000079A26CC8 002285 (v02 SUPERM SpsNm 00000002 INTL 20120913) [ 0.027685] ACPI: SSDT 0x0000000079A28F50 000064 (v02 SUPERM SpsNvs 00000002 INTL 20120913) [ 0.027701] ACPI: PRAD 0x0000000079A28FB8 000102 (v02 SUPERM SMCI--MB 00000002 INTL 20120913) [ 0.027717] ACPI: RMAD 0x0000000079A290C0 0000CC (v01 SUPERM SMCI--MB 00000001 INTL 20091013) [ 0.027733] ACPI: HEST 0x0000000079A29190 0000A8 (v01 SUPERM SMCI--MB 00000001 INTL 00000001) [ 0.027749] ACPI: BERT 0x0000000079A29238 000030 (v01 SUPERM SMCI--MB 00000001 INTL 00000001) [ 0.027765] ACPI: ERST 0x0000000079A29268 000230 (v01 SUPERM SMCI--MB 00000001 INTL 00000001) [ 0.027781] ACPI: EINJ 0x0000000079A29498 000130 (v01 SUPERM SMCI--MB 00000001 INTL 00000001) [ 0.027789] ACPI: Reserving FACP table memory at [mem 0x79a17ac8-0x79a17bd3] [ 0.027791] ACPI: Reserving DSDT table memory at [mem 0x799ff1f0-0x79a17ac4] [ 0.027792] ACPI: Reserving FACS table memory at [mem 0x79e59f80-0x79e59fbf] [ 0.027793] ACPI: Reserving APIC table memory at [mem 0x79a17bd8-0x79a17c93] [ 0.027794] ACPI: Reserving FPDT table memory at [mem 0x79a17c98-0x79a17cdb] [ 0.027795] ACPI: Reserving FIDT table memory at [mem 0x79a17ce0-0x79a17d7b] [ 0.027796] ACPI: Reserving SPMI table memory at [mem 0x79a17d80-0x79a17dbf] [ 0.027797] ACPI: Reserving MCFG table memory at [mem 0x79a17dc0-0x79a17dfb] [ 0.027797] ACPI: Reserving UEFI table memory at [mem 0x79a17e00-0x79a17e41] [ 0.027798] ACPI: Reserving DBG2 table memory at [mem 0x79a17e48-0x79a17eb9] [ 0.027799] ACPI: Reserving HPET table memory at [mem 0x79a17ec0-0x79a17ef7] [ 0.027800] ACPI: Reserving WDDT table memory at [mem 0x79a17ef8-0x79a17f37] [ 0.027801] ACPI: Reserving SSDT table memory at [mem 0x79a17f38-0x79a26cc2] [ 0.027802] ACPI: Reserving SSDT table memory at [mem 0x79a26cc8-0x79a28f4c] [ 0.027803] ACPI: Reserving SSDT table memory at [mem 0x79a28f50-0x79a28fb3] [ 0.027804] ACPI: Reserving PRAD table memory at [mem 0x79a28fb8-0x79a290b9] [ 0.027805] ACPI: Reserving RMAD table memory at [mem 0x79a290c0-0x79a2918b] [ 0.027806] ACPI: Reserving HEST table memory at [mem 0x79a29190-0x79a29237] [ 0.027807] ACPI: Reserving BERT table memory at [mem 0x79a29238-0x79a29267] [ 0.027808] ACPI: Reserving ERST table memory at [mem 0x79a29268-0x79a29497] [ 0.027809] ACPI: Reserving EINJ table memory at [mem 0x79a29498-0x79a295c7] [ 0.027916] APIC: Switched APIC routing to: Xen PV [ 0.031995] Zone ranges: [ 0.031997] DMA [mem 0x0000000000001000-0x0000000000ffffff] [ 0.031999] DMA32 [mem 0x0000000001000000-0x0000000020065fff] [ 0.032001] Normal empty [ 0.032003] Movable zone start for each node [ 0.032003] Early memory node ranges [ 0.032004] node 0: [mem 0x0000000000001000-0x0000000000099fff] [ 0.032006] node 0: [mem 0x0000000000100000-0x0000000020065fff] [ 0.032008] Initmem setup node 0 [mem 0x0000000000001000-0x0000000020065fff] [ 0.032013] On node 0, zone DMA: 1 pages in unavailable ranges [ 0.032052] On node 0, zone DMA: 102 pages in unavailable ranges [ 0.033535] On node 0, zone DMA32: 32666 pages in unavailable ranges [ 0.033540] p2m virtual area at (____ptrval____), size is 40000000 [ 0.160111] Remapped 102 page(s) [ 0.161492] ACPI: PM-Timer IO Port: 0x408 [ 0.161562] ACPI: LAPIC_NMI (acpi_id[0x00] high level lint[0x1]) [ 0.161565] ACPI: LAPIC_NMI (acpi_id[0x02] high level lint[0x1]) [ 0.161566] ACPI: LAPIC_NMI (acpi_id[0x04] high level lint[0x1]) [ 0.161568] ACPI: LAPIC_NMI (acpi_id[0x06] high level lint[0x1]) [ 0.161570] ACPI: LAPIC_NMI (acpi_id[0x01] high level lint[0x1]) [ 0.161571] ACPI: LAPIC_NMI (acpi_id[0x03] high level lint[0x1]) [ 0.161573] ACPI: LAPIC_NMI (acpi_id[0x05] high level lint[0x1]) [ 0.161574] ACPI: LAPIC_NMI (acpi_id[0x07] high level lint[0x1]) [ 0.161604] IOAPIC[0]: apic_id 8, version 32, address 0xfec00000, GSI 0-23 [ 0.161618] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl) [ 0.161621] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level) [ 0.161648] ACPI: Using ACPI (MADT) for SMP configuration information [ 0.161653] ACPI: HPET id: 0x8086a701 base: 0xfed00000 [ 0.161665] CPU topo: Max. logical packages: 1 [ 0.161666] CPU topo: Max. logical dies: 1 [ 0.161667] CPU topo: Max. dies per package: 1 [ 0.161673] CPU topo: Max. threads per core: 2 [ 0.161675] CPU topo: Num. cores per package: 4 [ 0.161675] CPU topo: Num. threads per package: 8 [ 0.161676] CPU topo: Allowing 8 present CPUs plus 0 hotplug CPUs [ 0.161690] PM: hibernation: Registered nosave memory: [mem 0x00000000-0x00000fff] [ 0.161693] PM: hibernation: Registered nosave memory: [mem 0x0009a000-0x0009afff] [ 0.161694] PM: hibernation: Registered nosave memory: [mem 0x0009b000-0x000fffff] [ 0.161696] [mem 0x90000000-0xfbffbfff] available for PCI devices [ 0.161701] Booting kernel on Xen [ 0.161702] Xen version: 4.19-unstable (preserve-AD) [ 0.161705] clocksource: refined-jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 1910969940391419 ns [ 0.168772] setup_percpu: NR_CPUS:64 nr_cpumask_bits:8 nr_cpu_ids:8 nr_node_ids:1 [ 0.169254] percpu: Embedded 57 pages/cpu s194408 r8192 d30872 u262144 [ 0.169260] pcpu-alloc: s194408 r8192 d30872 u262144 alloc=1*2097152 [ 0.169263] pcpu-alloc: [0] 0 1 2 3 4 5 6 7 [ 0.169335] xen: PV spinlocks enabled [ 0.169338] PV qspinlock hash table entries: 256 (order: 0, 4096 bytes, linear) [ 0.169341] Kernel command line: placeholder root=/dev/mapper/debina1--vg-root ro console=hvc0 [ 0.169380] Unknown kernel command line parameters "placeholder", will be passed to user space. [ 0.169391] random: crng init done [ 0.169468] Dentry cache hash table entries: 65536 (order: 7, 524288 bytes, linear) [ 0.169508] Inode-cache hash table entries: 32768 (order: 6, 262144 bytes, linear) [ 0.170824] Built 1 zonelists, mobility grouping on. Total pages: 131071 [ 0.170828] mem auto-init: stack:all(zero), heap alloc:off, heap free:off, mlocked free:off [ 0.170830] software IO TLB: area num 8. [ 0.234073] Memory: 385604K/524284K available (16384K kernel code, 2753K rwdata, 6164K rodata, 2680K init, 1864K bss, 138428K reserved, 0K cma-reserved) [ 0.234236] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=8, Nodes=1 [ 0.236834] Dynamic Preempt: voluntary [ 0.237084] rcu: Preemptible hierarchical RCU implementation. [ 0.237085] rcu: RCU event tracing is enabled. [ 0.237085] rcu: RCU restricting CPUs from NR_CPUS=64 to nr_cpu_ids=8. [ 0.237087] Trampoline variant of Tasks RCU enabled. [ 0.237088] rcu: RCU calculated value of scheduler-enlistment delay is 100 jiffies. [ 0.237089] rcu: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=8 [ 0.237124] RCU Tasks: Setting shift to 3 and lim to 1 rcu_task_cb_adjust=1. [ 0.248817] NR_IRQS: 4352, nr_irqs: 488, preallocated irqs: 16 [ 0.248975] xen:events: Using FIFO-based ABI [ 0.248999] xen: --> pirq=1 -> irq=1 (gsi=1) [ 0.249007] xen: --> pirq=2 -> irq=2 (gsi=2) [ 0.249015] xen: --> pirq=3 -> irq=3 (gsi=3) [ 0.249023] xen: --> pirq=4 -> irq=4 (gsi=4) [ 0.249030] xen: --> pirq=5 -> irq=5 (gsi=5) [ 0.249038] xen: --> pirq=6 -> irq=6 (gsi=6) [ 0.249045] xen: --> pirq=7 -> irq=7 (gsi=7) [ 0.249052] xen: --> pirq=8 -> irq=8 (gsi=8) [ 0.249060] xen: --> pirq=9 -> irq=9 (gsi=9) [ 0.249067] xen: --> pirq=10 -> irq=10 (gsi=10) [ 0.249075] xen: --> pirq=11 -> irq=11 (gsi=11) [ 0.249083] xen: --> pirq=12 -> irq=12 (gsi=12) [ 0.249090] xen: --> pirq=13 -> irq=13 (gsi=13) [ 0.249100] xen: --> pirq=14 -> irq=14 (gsi=14) [ 0.249107] xen: --> pirq=15 -> irq=15 (gsi=15) [ 0.249117] rcu: srcu_init: Setting srcu_struct sizes based on contention. [ 0.254489] Console: colour VGA+ 80x25 [ 0.254493] printk: legacy console [tty0] enabled [ 0.273628] printk: legacy console [hvc0] enabled [ 0.275019] ACPI: Core revision 20240322 [ 0.289034] clocksource: xen: mask: 0xffffffffffffffff max_cycles: 0x1cd42e4dffb, max_idle_ns: 881590591483 ns [ 0.289218] Xen: using vcpuop timer interface [ 0.289225] installing Xen timer for CPU 0 [ 0.289384] clocksource: tsc-early: mask: 0xffffffffffffffff max_cycles: 0x1fb633008a4, max_idle_ns: 440795292230 ns [ 0.289545] Calibrating delay loop (skipped), value calculated using timer frequency.. 4400.00 BogoMIPS (lpj=2200000) [ 0.289877] Last level iTLB entries: 4KB 64, 2MB 8, 4MB 8 [ 0.289995] Last level dTLB entries: 4KB 64, 2MB 0, 4MB 0, 1GB 4 [ 0.290124] Spectre V1 : Mitigation: usercopy/swapgs barriers and __user pointer sanitization [ 0.290274] Spectre V2 : Mitigation: Retpolines [ 0.290552] Spectre V2 : Spectre v2 / SpectreRSB mitigation: Filling RSB on context switch [ 0.290732] Spectre V2 : Spectre v2 / SpectreRSB : Filling RSB on VMEXIT [ 0.290852] Spectre V2 : Enabling Restricted Speculation for firmware calls [ 0.290974] Spectre V2 : mitigation: Enabling conditional Indirect Branch Prediction Barrier [ 0.291122] Spectre V2 : User space: Mitigation: STIBP via prctl [ 0.291549] Speculative Store Bypass: Mitigation: Speculative Store Bypass disabled via prctl [ 0.291703] MDS: Mitigation: Clear CPU buffers [ 0.291816] TAA: Mitigation: Clear CPU buffers [ 0.291930] MMIO Stale Data: Vulnerable: Clear CPU buffers attempted, no microcode [ 0.292095] x86/fpu: Supporting XSAVE feature 0x001: 'x87 floating point registers' [ 0.292241] x86/fpu: Supporting XSAVE feature 0x002: 'SSE registers' [ 0.292361] x86/fpu: Supporting XSAVE feature 0x004: 'AVX registers' [ 0.292481] x86/fpu: xstate_offset[2]: 576, xstate_sizes[2]: 256 [ 0.292547] x86/fpu: Enabled xstate features 0x7, context size is 832 bytes, using 'standard' format. [ 0.315189] Freeing SMP alternatives memory: 40K [ 0.315321] pid_max: default: 32768 minimum: 301 [ 0.315457] LSM: initializing lsm=capability,selinux [ 0.315551] SELinux: Initializing. [ 0.315688] Mount-cache hash table entries: 1024 (order: 1, 8192 bytes, linear) [ 0.315838] Mountpoint-cache hash table entries: 1024 (order: 1, 8192 bytes, linear) [ 0.316631] cpu 0 spinlock event irq 25 [ 0.316750] VPMU disabled by hypervisor. [ 0.317328] Performance Events: unsupported p6 CPU model 86 no PMU driver, software events only. [ 0.317482] signal: max sigframe size: 1776 [ 0.317618] rcu: Hierarchical SRCU implementation. [ 0.317734] rcu: Max phase no-delay instances is 400. [ 0.318348] smp: Bringing up secondary CPUs ... [ 0.318704] installing Xen timer for CPU 1 [ 0.319165] installing Xen timer for CPU 2 [ 0.319609] installing Xen timer for CPU 3 [ 0.041422] [Firmware Bug]: CPU 1: APIC ID mismatch. Firmware: 0x0002 APIC: 0x0001 [ 0.319832] cpu 1 spinlock event irq 45 [ 0.320688] MDS CPU bug present and SMT on, data leak possible. See https://www.kernel.org/doc/html/latest/admin-guide/hw-vuln/mds.html for more details. [ 0.320861] TAA CPU bug present and SMT on, data leak possible. See https://www.kernel.org/doc/html/latest/admin-guide/hw-vuln/tsx_async_abort.html for more details. [ 0.321051] MMIO Stale Data CPU bug present and SMT on, data leak possible. See https://www.kernel.org/doc/html/latest/admin-guide/hw-vuln/processor_mmio_stale_data.html for more details. [ 0.041422] [Firmware Bug]: CPU 2: APIC ID mismatch. Firmware: 0x0004 APIC: 0x0002 [ 0.321592] cpu 2 spinlock event irq 46 [ 0.041422] [Firmware Bug]: CPU 3: APIC ID mismatch. Firmware: 0x0006 APIC: 0x0003 [ 0.321858] cpu 3 spinlock event irq 47 [ 0.322776] installing Xen timer for CPU 4 [ 0.323236] installing Xen timer for CPU 5 [ 0.323784] installing Xen timer for CPU 6 [ 0.324199] installing Xen timer for CPU 7 [ 0.041422] [Firmware Bug]: CPU 4: APIC ID mismatch. Firmware: 0x0001 APIC: 0x0004 [ 0.324588] cpu 4 spinlock event irq 68 [ 0.041422] [Firmware Bug]: CPU 5: APIC ID mismatch. Firmware: 0x0003 APIC: 0x0005 [ 0.324852] cpu 5 spinlock event irq 69 [ 0.041422] [Firmware Bug]: CPU 6: APIC ID mismatch. Firmware: 0x0005 APIC: 0x0006 [ 0.325593] cpu 6 spinlock event irq 70 [ 0.325859] cpu 7 spinlock event irq 71 [ 0.326739] smp: Brought up 1 node, 8 CPUs [ 0.326979] devtmpfs: initialized [ 0.326979] x86/mm: Memory block size: 128MB [ 0.327837] ACPI: PM: Registering ACPI NVS region [mem 0x799b7000-0x79e5afff] (4866048 bytes) [ 0.327837] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 1911260446275000 ns [ 0.327964] futex hash table entries: 2048 (order: 5, 131072 bytes, linear) [ 0.328551] PM: RTC time: 21:01:13, date: 2024-06-17 [ 0.328797] NET: Registered PF_NETLINK/PF_ROUTE protocol family [ 0.328941] xen:grant_table: Grant tables using version 1 layout [ 0.329084] Grant table initialized [ 0.329433] audit: initializing netlink subsys (disabled) [ 0.329581] audit: type=2000 audit(1718658073.848:1): state=initialized audit_enabled=0 res=1 [ 0.329621] thermal_sys: Registered thermal governor 'step_wise' [ 0.329621] thermal_sys: Registered thermal governor 'user_space' [ 0.329757] ACPI FADT declares the system doesn't support PCIe ASPM, so disable it [ 0.330566] PCI: ECAM [mem 0x80000000-0x8fffffff] (base 0x80000000) for domain 0000 [bus 00-ff] [ 0.463670] PCI: Using configuration type 1 for base access [ 0.463861] kprobes: kprobe jump-optimization is enabled. All kprobes are optimized if possible. [ 0.464592] ACPI: Added _OSI(Module Device) [ 0.464717] ACPI: Added _OSI(Processor Device) [ 0.464870] ACPI: Added _OSI(3.0 _SCP Extensions) [ 0.464985] ACPI: Added _OSI(Processor Aggregator Device) [ 0.494377] ACPI: 4 ACPI AML tables successfully acquired and loaded [ 0.496481] xen: registering gsi 9 triggering 0 polarity 0 [ 0.499832] ACPI: Dynamic OEM Table Load: [ 0.502948] ACPI: _OSC evaluated successfully for all CPUs [ 0.503273] ACPI: Interpreter enabled [ 0.503400] ACPI: PM: (supports S0 S4 S5) [ 0.503548] ACPI: Using IOAPIC for interrupt routing [ 0.503699] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug [ 0.503865] PCI: Using E820 reservations for host bridge windows [ 0.504456] ACPI: Enabled 6 GPEs in block 00 to 3F [ 0.530675] ACPI: PCI Root Bridge [UNC0] (domain 0000 [bus ff]) [ 0.530806] acpi PNP0A03:03: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI HPX-Type3] [ 0.531066] acpi PNP0A03:03: _OSC: platform does not support [LTR] [ 0.531325] acpi PNP0A03:03: _OSC: OS now controls [PME PCIeCapability] [ 0.531446] acpi PNP0A03:03: FADT indicates ASPM is unsupported, using BIOS configuration [ 0.531592] PCI host bridge to bus 0000:ff [ 0.531706] pci_bus 0000:ff: root bus resource [bus ff] [ 0.531901] pci 0000:ff:0b.0: [8086:6f81] type 00 class 0x088000 conventional PCI endpoint [ 0.532410] pci 0000:ff:0b.1: [8086:6f36] type 00 class 0x110100 conventional PCI endpoint [ 0.532888] pci 0000:ff:0b.2: [8086:6f37] type 00 class 0x110100 conventional PCI endpoint [ 0.533348] pci 0000:ff:0b.3: [8086:6f76] type 00 class 0x088000 conventional PCI endpoint [ 0.533862] pci 0000:ff:0c.0: [8086:6fe0] type 00 class 0x088000 conventional PCI endpoint [ 0.534320] pci 0000:ff:0c.1: [8086:6fe1] type 00 class 0x088000 conventional PCI endpoint [ 0.534810] pci 0000:ff:0c.2: [8086:6fe2] type 00 class 0x088000 conventional PCI endpoint [ 0.535297] pci 0000:ff:0c.3: [8086:6fe3] type 00 class 0x088000 conventional PCI endpoint [ 0.535795] pci 0000:ff:0f.0: [8086:6ff8] type 00 class 0x088000 conventional PCI endpoint [ 0.536264] pci 0000:ff:0f.4: [8086:6ffc] type 00 class 0x088000 conventional PCI endpoint [ 0.536781] pci 0000:ff:0f.5: [8086:6ffd] type 00 class 0x088000 conventional PCI endpoint [ 0.537245] pci 0000:ff:0f.6: [8086:6ffe] type 00 class 0x088000 conventional PCI endpoint [ 0.537710] pci 0000:ff:10.0: [8086:6f1d] type 00 class 0x088000 conventional PCI endpoint [ 0.538202] pci 0000:ff:10.1: [8086:6f34] type 00 class 0x110100 conventional PCI endpoint [ 0.538677] pci 0000:ff:10.5: [8086:6f1e] type 00 class 0x088000 conventional PCI endpoint [ 0.539165] pci 0000:ff:10.6: [8086:6f7d] type 00 class 0x110100 conventional PCI endpoint [ 0.539624] pci 0000:ff:10.7: [8086:6f1f] type 00 class 0x088000 conventional PCI endpoint [ 0.540100] pci 0000:ff:12.0: [8086:6fa0] type 00 class 0x088000 conventional PCI endpoint [ 0.540388] pci 0000:ff:12.1: [8086:6f30] type 00 class 0x110100 conventional PCI endpoint [ 0.540921] pci 0000:ff:13.0: [8086:6fa8] type 00 class 0x088000 conventional PCI endpoint [ 0.541439] pci 0000:ff:13.1: [8086:6f71] type 00 class 0x088000 conventional PCI endpoint [ 0.541953] pci 0000:ff:13.2: [8086:6faa] type 00 class 0x088000 conventional PCI endpoint [ 0.542458] pci 0000:ff:13.3: [8086:6fab] type 00 class 0x088000 conventional PCI endpoint [ 0.542930] pci 0000:ff:13.4: [8086:6fac] type 00 class 0x088000 conventional PCI endpoint [ 0.543462] pci 0000:ff:13.5: [8086:6fad] type 00 class 0x088000 conventional PCI endpoint [ 0.543902] pci 0000:ff:13.6: [8086:6fae] type 00 class 0x088000 conventional PCI endpoint [ 0.544359] pci 0000:ff:13.7: [8086:6faf] type 00 class 0x088000 conventional PCI endpoint [ 0.544853] pci 0000:ff:14.0: [8086:6fb0] type 00 class 0x088000 conventional PCI endpoint [ 0.545353] pci 0000:ff:14.1: [8086:6fb1] type 00 class 0x088000 conventional PCI endpoint [ 0.545868] pci 0000:ff:14.2: [8086:6fb2] type 00 class 0x088000 conventional PCI endpoint [ 0.546369] pci 0000:ff:14.3: [8086:6fb3] type 00 class 0x088000 conventional PCI endpoint [ 0.546862] pci 0000:ff:14.4: [8086:6fbc] type 00 class 0x088000 conventional PCI endpoint [ 0.547348] pci 0000:ff:14.5: [8086:6fbd] type 00 class 0x088000 conventional PCI endpoint [ 0.547807] pci 0000:ff:14.6: [8086:6fbe] type 00 class 0x088000 conventional PCI endpoint [ 0.548264] pci 0000:ff:14.7: [8086:6fbf] type 00 class 0x088000 conventional PCI endpoint [ 0.548869] pci 0000:ff:15.0: [8086:6fb4] type 00 class 0x088000 conventional PCI endpoint [ 0.549400] pci 0000:ff:15.1: [8086:6fb5] type 00 class 0x088000 conventional PCI endpoint [ 0.549902] pci 0000:ff:15.2: [8086:6fb6] type 00 class 0x088000 conventional PCI endpoint [ 0.550417] pci 0000:ff:15.3: [8086:6fb7] type 00 class 0x088000 conventional PCI endpoint [ 0.550951] pci 0000:ff:1e.0: [8086:6f98] type 00 class 0x088000 conventional PCI endpoint [ 0.551407] pci 0000:ff:1e.1: [8086:6f99] type 00 class 0x088000 conventional PCI endpoint [ 0.551886] pci 0000:ff:1e.2: [8086:6f9a] type 00 class 0x088000 conventional PCI endpoint [ 0.552347] pci 0000:ff:1e.3: [8086:6fc0] type 00 class 0x088000 conventional PCI endpoint [ 0.552632] pci 0000:ff:1e.4: [8086:6f9c] type 00 class 0x088000 conventional PCI endpoint [ 0.553123] pci 0000:ff:1f.0: [8086:6f88] type 00 class 0x088000 conventional PCI endpoint [ 0.553592] pci 0000:ff:1f.2: [8086:6f8a] type 00 class 0x088000 conventional PCI endpoint [ 0.554053] pci_bus 0000:ff: on NUMA node 0 [ 0.558367] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-fe]) [ 0.558495] acpi PNP0A08:00: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI HPX-Type3] [ 0.558673] acpi PNP0A08:00: _OSC: platform does not support [PME LTR] [ 0.559007] acpi PNP0A08:00: _OSC: OS now controls [PCIeCapability] [ 0.559128] acpi PNP0A08:00: FADT indicates ASPM is unsupported, using BIOS configuration [ 0.559634] PCI host bridge to bus 0000:00 [ 0.559749] pci_bus 0000:00: root bus resource [io 0x0000-0x0cf7 window] [ 0.559902] pci_bus 0000:00: root bus resource [io 0x1000-0xffff window] [ 0.560023] pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff window] [ 0.560168] pci_bus 0000:00: root bus resource [mem 0x90000000-0xfbffbfff window] [ 0.560314] pci_bus 0000:00: root bus resource [bus 00-fe] [ 0.560499] pci 0000:00:00.0: [8086:6f00] type 00 class 0x060000 PCIe Root Port [ 0.561089] pci 0000:00:01.0: [8086:6f02] type 01 class 0x060400 PCIe Root Port [ 0.561431] pci 0000:00:01.0: PCI bridge to [bus 01] [ 0.561849] pci 0000:00:01.0: PME# supported from D0 D3hot D3cold [ 0.562230] pci 0000:00:01.1: [8086:6f03] type 01 class 0x060400 PCIe Root Port [ 0.562560] pci 0000:00:01.1: PCI bridge to [bus 02] [ 0.562975] pci 0000:00:01.1: PME# supported from D0 D3hot D3cold [ 0.563378] pci 0000:00:02.0: [8086:6f04] type 01 class 0x060400 PCIe Root Port [ 0.563680] pci 0000:00:02.0: PCI bridge to [bus 03] [ 0.563819] pci 0000:00:02.0: bridge window [mem 0xfb500000-0xfb5fffff] [ 0.564245] pci 0000:00:02.0: PME# supported from D0 D3hot D3cold [ 0.564613] pci 0000:00:02.2: [8086:6f06] type 01 class 0x060400 PCIe Root Port [ 0.564914] pci 0000:00:02.2: PCI bridge to [bus 04] [ 0.565053] pci 0000:00:02.2: bridge window [mem 0xfb400000-0xfb4fffff] [ 0.565226] pci 0000:00:02.2: bridge window [mem 0xfba00000-0xfbefffff 64bit pref] [ 0.565628] pci 0000:00:02.2: PME# supported from D0 D3hot D3cold [ 0.566019] pci 0000:00:03.0: [8086:6f08] type 01 class 0x060400 PCIe Root Port [ 0.566320] pci 0000:00:03.0: PCI bridge to [bus 05] [ 0.566770] pci 0000:00:03.0: PME# supported from D0 D3hot D3cold [ 0.567149] pci 0000:00:03.2: [8086:6f0a] type 01 class 0x060400 PCIe Root Port [ 0.567450] pci 0000:00:03.2: PCI bridge to [bus 06] [ 0.567848] pci 0000:00:03.2: PME# supported from D0 D3hot D3cold [ 0.568265] pci 0000:00:05.0: [8086:6f28] type 00 class 0x088000 PCIe Root Complex Integrated Endpoint [ 0.568879] pci 0000:00:05.1: [8086:6f29] type 00 class 0x088000 PCIe Root Complex Integrated Endpoint [ 0.569572] pci 0000:00:05.2: [8086:6f2a] type 00 class 0x088000 PCIe Root Complex Integrated Endpoint [ 0.570280] pci 0000:00:14.0: [8086:8c31] type 00 class 0x0c0330 conventional PCI endpoint [ 0.570527] pci 0000:00:14.0: BAR 0 [mem 0xfb600000-0xfb60ffff 64bit] [ 0.570918] pci 0000:00:14.0: PME# supported from D3hot D3cold [ 0.571269] pci 0000:00:16.0: [8086:8c3a] type 00 class 0x078000 conventional PCI endpoint [ 0.571516] pci 0000:00:16.0: BAR 0 [mem 0xfb617000-0xfb61700f 64bit] [ 0.571917] pci 0000:00:16.0: PME# supported from D0 D3hot D3cold [ 0.572226] pci 0000:00:16.1: [8086:8c3b] type 00 class 0x078000 conventional PCI endpoint [ 0.572473] pci 0000:00:16.1: BAR 0 [mem 0xfb616000-0xfb61600f 64bit] [ 0.572892] pci 0000:00:16.1: PME# supported from D0 D3hot D3cold [ 0.573277] pci 0000:00:1a.0: [8086:8c2d] type 00 class 0x0c0320 conventional PCI endpoint [ 0.573504] pci 0000:00:1a.0: BAR 0 [mem 0xfb614000-0xfb6143ff] [ 0.573964] pci 0000:00:1a.0: PME# supported from D0 D3hot D3cold [ 0.574292] pci 0000:00:1c.0: [8086:8c10] type 01 class 0x060400 PCIe Root Port [ 0.574624] pci 0000:00:1c.0: PCI bridge to [bus 07] [ 0.574755] pci 0000:00:1c.0: bridge window [io 0xe000-0xefff] [ 0.574884] pci 0000:00:1c.0: bridge window [mem 0xfb300000-0xfb3fffff] [ 0.575301] pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold [ 0.575505] pci 0000:00:1c.0: Enabling MPC IRBNCE [ 0.575556] pci 0000:00:1c.0: Intel PCH root port ACS workaround enabled [ 0.575881] pci 0000:00:1c.1: [8086:8c12] type 01 class 0x060400 PCIe Root Port [ 0.576189] pci 0000:00:1c.1: PCI bridge to [bus 08] [ 0.576320] pci 0000:00:1c.1: bridge window [io 0xd000-0xdfff] [ 0.576449] pci 0000:00:1c.1: bridge window [mem 0xfb200000-0xfb2fffff] [ 0.576852] pci 0000:00:1c.1: PME# supported from D0 D3hot D3cold [ 0.577050] pci 0000:00:1c.1: Enabling MPC IRBNCE [ 0.577205] pci 0000:00:1c.1: Intel PCH root port ACS workaround enabled [ 0.577515] pci 0000:00:1c.3: [8086:8c16] type 01 class 0x060400 PCIe Root Port [ 0.577711] pci 0000:00:1c.3: PCI bridge to [bus 09-0a] [ 0.577842] pci 0000:00:1c.3: bridge window [io 0xc000-0xcfff] [ 0.577971] pci 0000:00:1c.3: bridge window [mem 0xfa000000-0xfb0fffff] [ 0.578395] pci 0000:00:1c.3: PME# supported from D0 D3hot D3cold [ 0.578625] pci 0000:00:1c.3: Enabling MPC IRBNCE [ 0.578747] pci 0000:00:1c.3: Intel PCH root port ACS workaround enabled [ 0.579046] pci 0000:00:1c.4: [8086:8c18] type 01 class 0x060400 PCIe Root Port [ 0.579369] pci 0000:00:1c.4: PCI bridge to [bus 0b] [ 0.579501] pci 0000:00:1c.4: bridge window [io 0xb000-0xbfff] [ 0.579559] pci 0000:00:1c.4: bridge window [mem 0xfb100000-0xfb1fffff] [ 0.580015] pci 0000:00:1c.4: PME# supported from D0 D3hot D3cold [ 0.580231] pci 0000:00:1c.4: Enabling MPC IRBNCE [ 0.580355] pci 0000:00:1c.4: Intel PCH root port ACS workaround enabled [ 0.580701] pci 0000:00:1d.0: [8086:8c26] type 00 class 0x0c0320 conventional PCI endpoint [ 0.580929] pci 0000:00:1d.0: BAR 0 [mem 0xfb613000-0xfb6133ff] [ 0.581497] pci 0000:00:1d.0: PME# supported from D0 D3hot D3cold [ 0.581760] pci 0000:00:1f.0: [8086:8c54] type 00 class 0x060100 conventional PCI endpoint [ 0.582568] pci 0000:00:1f.2: [8086:8c02] type 00 class 0x010601 conventional PCI endpoint [ 0.582792] pci 0000:00:1f.2: BAR 0 [io 0xf070-0xf077] [ 0.582950] pci 0000:00:1f.2: BAR 1 [io 0xf060-0xf063] [ 0.583107] pci 0000:00:1f.2: BAR 2 [io 0xf050-0xf057] [ 0.583265] pci 0000:00:1f.2: BAR 3 [io 0xf040-0xf043] [ 0.583422] pci 0000:00:1f.2: BAR 4 [io 0xf020-0xf03f] [ 0.583577] pci 0000:00:1f.2: BAR 5 [mem 0xfb612000-0xfb6127ff] [ 0.583914] pci 0000:00:1f.2: PME# supported from D3hot [ 0.584204] pci 0000:00:1f.3: [8086:8c22] type 00 class 0x0c0500 conventional PCI endpoint [ 0.584451] pci 0000:00:1f.3: BAR 0 [mem 0xfb611000-0xfb6110ff 64bit] [ 0.584673] pci 0000:00:1f.3: BAR 4 [io 0xf000-0xf01f] [ 0.585058] pci 0000:00:1f.6: [8086:8c24] type 00 class 0x118000 conventional PCI endpoint [ 0.585327] pci 0000:00:1f.6: BAR 0 [mem 0xfb610000-0xfb610fff 64bit] [ 0.586048] pci 0000:00:01.0: PCI bridge to [bus 01] [ 0.586352] pci 0000:00:01.1: PCI bridge to [bus 02] [ 0.586731] pci 0000:03:00.0: [8086:6f50] type 00 class 0x088000 PCIe Endpoint [ 0.586971] pci 0000:03:00.0: BAR 0 [mem 0xfb506000-0xfb507fff 64bit] [ 0.587750] pci 0000:03:00.1: [8086:6f51] type 00 class 0x088000 PCIe Endpoint [ 0.588023] pci 0000:03:00.1: BAR 0 [mem 0xfb504000-0xfb505fff 64bit] [ 0.588748] pci 0000:03:00.2: [8086:6f52] type 00 class 0x088000 PCIe Endpoint [ 0.588989] pci 0000:03:00.2: BAR 0 [mem 0xfb502000-0xfb503fff 64bit] [ 0.589739] pci 0000:03:00.3: [8086:6f53] type 00 class 0x088000 PCIe Endpoint [ 0.589979] pci 0000:03:00.3: BAR 0 [mem 0xfb500000-0xfb501fff 64bit] [ 0.590698] pci 0000:00:02.0: PCI bridge to [bus 03] [ 0.591068] pci 0000:04:00.0: [8086:15ac] type 00 class 0x020000 PCIe Endpoint [ 0.591318] pci 0000:04:00.0: BAR 0 [mem 0xfbc00000-0xfbdfffff 64bit pref] [ 0.591588] pci 0000:04:00.0: BAR 4 [mem 0xfbe04000-0xfbe07fff 64bit pref] [ 0.591750] pci 0000:04:00.0: ROM [mem 0xfb480000-0xfb4fffff pref] [ 0.592133] pci 0000:04:00.0: PME# supported from D0 D3hot D3cold [ 0.592363] pci 0000:04:00.0: VF BAR 0 [mem 0x00000000-0x00003fff 64bit] [ 0.592485] pci 0000:04:00.0: VF BAR 0 [mem 0x00000000-0x000fffff 64bit]: contains BAR 0 for 64 VFs [ 0.592598] pci 0000:04:00.0: VF BAR 3 [mem 0x00000000-0x00003fff 64bit] [ 0.592720] pci 0000:04:00.0: VF BAR 3 [mem 0x00000000-0x000fffff 64bit]: contains BAR 3 for 64 VFs [ 0.593337] pci 0000:04:00.1: [8086:15ac] type 00 class 0x020000 PCIe Endpoint [ 0.593578] pci 0000:04:00.1: BAR 0 [mem 0xfba00000-0xfbbfffff 64bit pref] [ 0.593841] pci 0000:04:00.1: BAR 4 [mem 0xfbe00000-0xfbe03fff 64bit pref] [ 0.594002] pci 0000:04:00.1: ROM [mem 0xfb400000-0xfb47ffff pref] [ 0.594352] pci 0000:04:00.1: PME# supported from D0 D3hot D3cold [ 0.594559] pci 0000:04:00.1: VF BAR 0 [mem 0x00000000-0x00003fff 64bit] [ 0.594713] pci 0000:04:00.1: VF BAR 0 [mem 0x00000000-0x000fffff 64bit]: contains BAR 0 for 64 VFs [ 0.594914] pci 0000:04:00.1: VF BAR 3 [mem 0x00000000-0x00003fff 64bit] [ 0.595547] pci 0000:04:00.1: VF BAR 3 [mem 0x00000000-0x000fffff 64bit]: contains BAR 3 for 64 VFs [ 0.596111] pci 0000:00:02.2: PCI bridge to [bus 04] [ 0.596421] pci 0000:00:03.0: PCI bridge to [bus 05] [ 0.596726] pci 0000:00:03.2: PCI bridge to [bus 06] [ 0.597138] pci 0000:07:00.0: working around ROM BAR overlap defect [ 0.597259] pci 0000:07:00.0: [8086:1533] type 00 class 0x020000 PCIe Endpoint [ 0.597492] pci 0000:07:00.0: BAR 0 [mem 0xfb300000-0xfb37ffff] [ 0.597646] pci 0000:07:00.0: BAR 2 [io 0xe000-0xe01f] [ 0.597826] pci 0000:07:00.0: BAR 3 [mem 0xfb380000-0xfb383fff] [ 0.598397] pci 0000:07:00.0: PME# supported from D0 D3hot D3cold [ 0.598899] pci 0000:00:1c.0: PCI bridge to [bus 07] [ 0.599289] pci 0000:08:00.0: working around ROM BAR overlap defect [ 0.599410] pci 0000:08:00.0: [8086:1533] type 00 class 0x020000 PCIe Endpoint [ 0.599638] pci 0000:08:00.0: BAR 0 [mem 0xfb200000-0xfb27ffff] [ 0.599861] pci 0000:08:00.0: BAR 2 [io 0xd000-0xd01f] [ 0.600026] pci 0000:08:00.0: BAR 3 [mem 0xfb280000-0xfb283fff] [ 0.600565] pci 0000:08:00.0: PME# supported from D0 D3hot D3cold [ 0.601068] pci 0000:00:1c.1: PCI bridge to [bus 08] [ 0.601438] pci 0000:09:00.0: [1a03:1150] type 01 class 0x060400 PCIe to PCI/PCI-X bridge [ 0.601726] pci 0000:09:00.0: PCI bridge to [bus 0a] [ 0.601869] pci 0000:09:00.0: bridge window [io 0xc000-0xcfff] [ 0.602000] pci 0000:09:00.0: bridge window [mem 0xfa000000-0xfb0fffff] [ 0.602267] pci 0000:09:00.0: enabling Extended Tags [ 0.602612] pci 0000:09:00.0: supports D1 D2 [ 0.602727] pci 0000:09:00.0: PME# supported from D0 D1 D2 D3hot D3cold [ 0.603094] pci 0000:00:1c.3: PCI bridge to [bus 09-0a] [ 0.603413] pci_bus 0000:0a: extended config space not accessible [ 0.603610] pci 0000:0a:00.0: [1a03:2000] type 00 class 0x030000 conventional PCI endpoint [ 0.603846] pci 0000:0a:00.0: BAR 0 [mem 0xfa000000-0xfaffffff] [ 0.604013] pci 0000:0a:00.0: BAR 1 [mem 0xfb000000-0xfb01ffff] [ 0.604180] pci 0000:0a:00.0: BAR 2 [io 0xc000-0xc07f] [ 0.604534] pci 0000:0a:00.0: Video device with shadowed ROM at [mem 0x000c0000-0x000dffff] [ 0.604827] pci 0000:0a:00.0: supports D1 D2 [ 0.604974] pci 0000:0a:00.0: PME# supported from D0 D1 D2 D3hot D3cold [ 0.605419] pci 0000:09:00.0: PCI bridge to [bus 0a] [ 0.605867] pci 0000:0b:00.0: [8086:1521] type 00 class 0x020000 PCIe Endpoint [ 0.606094] pci 0000:0b:00.0: BAR 0 [mem 0xfb160000-0xfb17ffff] [ 0.606331] pci 0000:0b:00.0: BAR 2 [io 0xb060-0xb07f] [ 0.606498] pci 0000:0b:00.0: BAR 3 [mem 0xfb18c000-0xfb18ffff] [ 0.606953] pci 0000:0b:00.0: PME# supported from D0 D3hot D3cold [ 0.607190] pci 0000:0b:00.0: VF BAR 0 [mem 0x00000000-0x00003fff 64bit pref] [ 0.607314] pci 0000:0b:00.0: VF BAR 0 [mem 0x00000000-0x0001ffff 64bit pref]: contains BAR 0 for 8 VFs [ 0.607530] pci 0000:0b:00.0: VF BAR 3 [mem 0x00000000-0x00003fff 64bit pref] [ 0.607548] pci 0000:0b:00.0: VF BAR 3 [mem 0x00000000-0x0001ffff 64bit pref]: contains BAR 3 for 8 VFs [ 0.608119] pci 0000:0b:00.1: [8086:1521] type 00 class 0x020000 PCIe Endpoint [ 0.608347] pci 0000:0b:00.1: BAR 0 [mem 0xfb140000-0xfb15ffff] [ 0.608556] pci 0000:0b:00.1: BAR 2 [io 0xb040-0xb05f] [ 0.608717] pci 0000:0b:00.1: BAR 3 [mem 0xfb188000-0xfb18bfff] [ 0.609265] pci 0000:0b:00.1: PME# supported from D0 D3hot D3cold [ 0.609495] pci 0000:0b:00.1: VF BAR 0 [mem 0x00000000-0x00003fff 64bit pref] [ 0.609548] pci 0000:0b:00.1: VF BAR 0 [mem 0x00000000-0x0001ffff 64bit pref]: contains BAR 0 for 8 VFs [ 0.609763] pci 0000:0b:00.1: VF BAR 3 [mem 0x00000000-0x00003fff 64bit pref] [ 0.609887] pci 0000:0b:00.1: VF BAR 3 [mem 0x00000000-0x0001ffff 64bit pref]: contains BAR 3 for 8 VFs [ 0.610446] pci 0000:0b:00.2: [8086:1521] type 00 class 0x020000 PCIe Endpoint [ 0.610630] pci 0000:0b:00.2: BAR 0 [mem 0xfb120000-0xfb13ffff] [ 0.610839] pci 0000:0b:00.2: BAR 2 [io 0xb020-0xb03f] [ 0.611001] pci 0000:0b:00.2: BAR 3 [mem 0xfb184000-0xfb187fff] [ 0.611547] pci 0000:0b:00.2: PME# supported from D0 D3hot D3cold [ 0.611778] pci 0000:0b:00.2: VF BAR 0 [mem 0x00000000-0x00003fff 64bit pref] [ 0.611901] pci 0000:0b:00.2: VF BAR 0 [mem 0x00000000-0x0001ffff 64bit pref]: contains BAR 0 for 8 VFs [ 0.612116] pci 0000:0b:00.2: VF BAR 3 [mem 0x00000000-0x00003fff 64bit pref] [ 0.612239] pci 0000:0b:00.2: VF BAR 3 [mem 0x00000000-0x0001ffff 64bit pref]: contains BAR 3 for 8 VFs [ 0.612773] pci 0000:0b:00.3: [8086:1521] type 00 class 0x020000 PCIe Endpoint [ 0.613027] pci 0000:0b:00.3: BAR 0 [mem 0xfb100000-0xfb11ffff] [ 0.613237] pci 0000:0b:00.3: BAR 2 [io 0xb000-0xb01f] [ 0.613398] pci 0000:0b:00.3: BAR 3 [mem 0xfb180000-0xfb183fff] [ 0.613916] pci 0000:0b:00.3: PME# supported from D0 D3hot D3cold [ 0.614147] pci 0000:0b:00.3: VF BAR 0 [mem 0x00000000-0x00003fff 64bit pref] [ 0.614301] pci 0000:0b:00.3: VF BAR 0 [mem 0x00000000-0x0001ffff 64bit pref]: contains BAR 0 for 8 VFs [ 0.614516] pci 0000:0b:00.3: VF BAR 3 [mem 0x00000000-0x00003fff 64bit pref] [ 0.614548] pci 0000:0b:00.3: VF BAR 3 [mem 0x00000000-0x0001ffff 64bit pref]: contains BAR 3 for 8 VFs [ 0.615134] pci 0000:00:1c.4: PCI bridge to [bus 0b] [ 0.615290] pci 0000:00:1c.4: bridge has subordinate 0b but max busn 0c [ 0.615861] pci_bus 0000:00: on NUMA node 0 [ 0.615962] xen: registering gsi 13 triggering 1 polarity 0 [ 0.616946] ACPI: PCI: Interrupt link LNKA configured for IRQ 11 [ 0.617139] ACPI: PCI: Interrupt link LNKB configured for IRQ 10 [ 0.617327] ACPI: PCI: Interrupt link LNKC configured for IRQ 5 [ 0.617515] ACPI: PCI: Interrupt link LNKD configured for IRQ 11 [ 0.617619] ACPI: PCI: Interrupt link LNKE configured for IRQ 0 [ 0.617738] ACPI: PCI: Interrupt link LNKE disabled [ 0.617921] ACPI: PCI: Interrupt link LNKF configured for IRQ 0 [ 0.618040] ACPI: PCI: Interrupt link LNKF disabled [ 0.618242] ACPI: PCI: Interrupt link LNKG configured for IRQ 0 [ 0.618361] ACPI: PCI: Interrupt link LNKG disabled [ 0.618543] ACPI: PCI: Interrupt link LNKH configured for IRQ 0 [ 0.618665] ACPI: PCI: Interrupt link LNKH disabled [ 0.618934] xen:balloon: Initialising balloon driver [ 0.619072] iommu: Default domain type: Translated [ 0.619072] iommu: DMA domain TLB invalidation policy: lazy mode [ 0.619572] SCSI subsystem initialized [ 0.619698] libata version 3.00 loaded. [ 0.619698] ACPI: bus type USB registered [ 0.619715] usbcore: registered new interface driver usbfs [ 0.619837] usbcore: registered new interface driver hub [ 0.619959] usbcore: registered new device driver usb [ 0.620088] pps_core: LinuxPPS API ver. 1 registered [ 0.620203] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti [ 0.620552] PTP clock support registered [ 0.620689] Advanced Linux Sound Architecture Driver Initialized. [ 0.620959] NetLabel: Initializing [ 0.621072] NetLabel: domain hash size = 128 [ 0.621551] NetLabel: protocols = UNLABELED CIPSOv4 CALIPSO [ 0.621688] NetLabel: unlabeled traffic allowed by default [ 0.621830] PCI: Using ACPI for IRQ routing [ 0.658254] PCI: pci_cache_line_size set to 64 bytes [ 0.659034] e820: reserve RAM buffer [mem 0x0009a000-0x0009ffff] [ 0.659037] e820: reserve RAM buffer [mem 0x20066000-0x23ffffff] [ 0.659066] pci 0000:0a:00.0: vgaarb: setting as boot VGA device [ 0.659066] pci 0000:0a:00.0: vgaarb: bridge control possible [ 0.659066] pci 0000:0a:00.0: vgaarb: VGA device added: decodes=io+mem,owns=io+mem,locks=none [ 0.659549] vgaarb: loaded [ 0.659947] clocksource: Switched to clocksource tsc-early [ 0.660418] VFS: Disk quotas dquot_6.6.0 [ 0.660536] VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes) [ 0.660536] hugetlbfs: disabling because there are no supported hugepage sizes [ 0.660536] pnp: PnP ACPI init [ 0.660935] xen: registering gsi 8 triggering 1 polarity 0 [ 0.661136] system 00:01: [io 0x0500-0x057f] has been reserved [ 0.661166] system 00:01: [io 0x0400-0x047f] has been reserved [ 0.661166] system 00:01: [io 0x0580-0x059f] has been reserved [ 0.661166] system 00:01: [io 0x0600-0x061f] has been reserved [ 0.661650] system 00:01: [io 0x0880-0x0883] has been reserved [ 0.661772] system 00:01: [io 0x0800-0x081f] has been reserved [ 0.661924] system 00:01: [mem 0xfed1c000-0xfed3ffff] could not be reserved [ 0.662046] system 00:01: [mem 0xfed45000-0xfed8bfff] has been reserved [ 0.662167] system 00:01: [mem 0xff000000-0xffffffff] has been reserved [ 0.662287] system 00:01: [mem 0xfee00000-0xfeefffff] has been reserved [ 0.662408] system 00:01: [mem 0xfed12000-0xfed1200f] has been reserved [ 0.662528] system 00:01: [mem 0xfed12010-0xfed1201f] has been reserved [ 0.662673] system 00:01: [mem 0xfed1b000-0xfed1bfff] has been reserved [ 0.663081] system 00:02: [io 0x0a00-0x0a0f] has been reserved [ 0.663210] system 00:02: [io 0x0a10-0x0a1f] has been reserved [ 0.663338] system 00:02: [io 0x0a20-0x0a2f] has been reserved [ 0.663457] system 00:02: [io 0x0a30-0x0a3f] has been reserved [ 0.663592] system 00:02: [io 0x0a40-0x0a4f] has been reserved [ 0.664019] xen: registering gsi 4 triggering 1 polarity 0 [ 0.664024] Already setup the GSI :4 [ 0.664137] pnp 00:03: [dma 0 disabled] [ 0.664447] xen: registering gsi 3 triggering 1 polarity 0 [ 0.664458] pnp 00:04: [dma 0 disabled] [ 0.665031] pnp: PnP ACPI: found 5 devices [ 0.696753] PM-Timer failed consistency check (0xffffff) - aborting. [ 0.696963] NET: Registered PF_INET protocol family [ 0.697118] IP idents hash table entries: 8192 (order: 4, 65536 bytes, linear) [ 0.697472] tcp_listen_portaddr_hash hash table entries: 256 (order: 0, 4096 bytes, linear) [ 0.697655] Table-perturb hash table entries: 65536 (order: 6, 262144 bytes, linear) [ 0.697845] TCP established hash table entries: 4096 (order: 3, 32768 bytes, linear) [ 0.698043] TCP bind hash table entries: 4096 (order: 5, 131072 bytes, linear) [ 0.698216] TCP: Hash tables configured (established 4096 bind 4096) [ 0.698359] UDP hash table entries: 256 (order: 1, 8192 bytes, linear) [ 0.698483] UDP-Lite hash table entries: 256 (order: 1, 8192 bytes, linear) [ 0.698662] NET: Registered PF_UNIX/PF_LOCAL protocol family [ 0.698996] RPC: Registered named UNIX socket transport module. [ 0.699122] RPC: Registered udp transport module. [ 0.699240] RPC: Registered tcp transport module. [ 0.699368] RPC: Registered tcp-with-tls transport module. [ 0.699483] RPC: Registered tcp NFSv4.1 backchannel transport module. [ 0.700108] pci 0000:00:1c.4: bridge window [mem 0x00100000-0x000fffff 64bit pref] to [bus 0b] add_size 100000 add_align 100000 [ 0.700279] pci 0000:00:1c.4: bridge window [mem 0x90000000-0x900fffff 64bit pref]: assigned [ 0.700429] pci 0000:00:01.0: PCI bridge to [bus 01] [ 0.700628] pci 0000:00:01.1: PCI bridge to [bus 02] [ 0.700813] pci 0000:00:02.0: PCI bridge to [bus 03] [ 0.702033] pci 0000:00:02.0: bridge window [mem 0xfb500000-0xfb5fffff] [ 0.702199] pci 0000:04:00.0: VF BAR 0 [mem size 0x00100000 64bit]: can't assign; no space [ 0.702347] pci 0000:04:00.0: VF BAR 0 [mem size 0x00100000 64bit]: failed to assign [ 0.702495] pci 0000:04:00.0: VF BAR 3 [mem size 0x00100000 64bit]: can't assign; no space [ 0.702666] pci 0000:04:00.0: VF BAR 3 [mem size 0x00100000 64bit]: failed to assign [ 0.702815] pci 0000:04:00.1: VF BAR 0 [mem size 0x00100000 64bit]: can't assign; no space [ 0.702962] pci 0000:04:00.1: VF BAR 0 [mem size 0x00100000 64bit]: failed to assign [ 0.703108] pci 0000:04:00.1: VF BAR 3 [mem size 0x00100000 64bit]: can't assign; no space [ 0.703254] pci 0000:04:00.1: VF BAR 3 [mem size 0x00100000 64bit]: failed to assign [ 0.703402] pci 0000:04:00.0: VF BAR 0 [mem size 0x00100000 64bit]: can't assign; no space [ 0.703587] pci 0000:04:00.0: VF BAR 0 [mem size 0x00100000 64bit]: failed to assign [ 0.703734] pci 0000:04:00.0: VF BAR 3 [mem size 0x00100000 64bit]: can't assign; no space [ 0.703881] pci 0000:04:00.0: VF BAR 3 [mem size 0x00100000 64bit]: failed to assign [ 0.704027] pci 0000:04:00.1: VF BAR 0 [mem size 0x00100000 64bit]: can't assign; no space [ 0.704173] pci 0000:04:00.1: VF BAR 0 [mem size 0x00100000 64bit]: failed to assign [ 0.704319] pci 0000:04:00.1: VF BAR 3 [mem size 0x00100000 64bit]: can't assign; no space [ 0.704466] pci 0000:04:00.1: VF BAR 3 [mem size 0x00100000 64bit]: failed to assign [ 0.704641] pci 0000:00:02.2: PCI bridge to [bus 04] [ 0.704781] pci 0000:00:02.2: bridge window [mem 0xfb400000-0xfb4fffff] [ 0.704927] pci 0000:00:02.2: bridge window [mem 0xfba00000-0xfbefffff 64bit pref] [ 0.705098] pci 0000:00:03.0: PCI bridge to [bus 05] [ 0.705272] pci 0000:00:03.2: PCI bridge to [bus 06] [ 0.705446] pci 0000:00:1c.0: PCI bridge to [bus 07] [ 0.705580] pci 0000:00:1c.0: bridge window [io 0xe000-0xefff] [ 0.705736] pci 0000:00:1c.0: bridge window [mem 0xfb300000-0xfb3fffff] [ 0.705901] pci 0000:00:1c.1: PCI bridge to [bus 08] [ 0.706021] pci 0000:00:1c.1: bridge window [io 0xd000-0xdfff] [ 0.706160] pci 0000:00:1c.1: bridge window [mem 0xfb200000-0xfb2fffff] [ 0.706356] pci 0000:09:00.0: PCI bridge to [bus 0a] [ 0.706477] pci 0000:09:00.0: bridge window [io 0xc000-0xcfff] [ 0.706649] pci 0000:09:00.0: bridge window [mem 0xfa000000-0xfb0fffff] [ 0.706818] pci 0000:00:1c.3: PCI bridge to [bus 09-0a] [ 0.706939] pci 0000:00:1c.3: bridge window [io 0xc000-0xcfff] [ 0.707079] pci 0000:00:1c.3: bridge window [mem 0xfa000000-0xfb0fffff] [ 0.707243] pci 0000:0b:00.0: VF BAR 0 [mem 0x90000000-0x9001ffff 64bit pref]: assigned [ 0.707401] pci 0000:0b:00.0: VF BAR 3 [mem 0x90020000-0x9003ffff 64bit pref]: assigned [ 0.707571] pci 0000:0b:00.1: VF BAR 0 [mem 0x90040000-0x9005ffff 64bit pref]: assigned [ 0.707759] pci 0000:0b:00.1: VF BAR 3 [mem 0x90060000-0x9007ffff 64bit pref]: assigned [ 0.707915] pci 0000:0b:00.2: VF BAR 0 [mem 0x90080000-0x9009ffff 64bit pref]: assigned [ 0.708069] pci 0000:0b:00.2: VF BAR 3 [mem 0x900a0000-0x900bffff 64bit pref]: assigned [ 0.708223] pci 0000:0b:00.3: VF BAR 0 [mem 0x900c0000-0x900dffff 64bit pref]: assigned [ 0.708376] pci 0000:0b:00.3: VF BAR 3 [mem 0x900e0000-0x900fffff 64bit pref]: assigned [ 0.708531] pci 0000:00:1c.4: PCI bridge to [bus 0b] [ 0.708674] pci 0000:00:1c.4: bridge window [io 0xb000-0xbfff] [ 0.708816] pci 0000:00:1c.4: bridge window [mem 0xfb100000-0xfb1fffff] [ 0.708953] pci 0000:00:1c.4: bridge window [mem 0x90000000-0x900fffff 64bit pref] [ 0.709144] pci_bus 0000:00: Some PCI device resources are unassigned, try booting with pci=realloc [ 0.709295] pci_bus 0000:00: resource 4 [io 0x0000-0x0cf7 window] [ 0.709415] pci_bus 0000:00: resource 5 [io 0x1000-0xffff window] [ 0.709539] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff window] [ 0.709678] pci_bus 0000:00: resource 7 [mem 0x90000000-0xfbffbfff window] [ 0.709801] pci_bus 0000:03: resource 1 [mem 0xfb500000-0xfb5fffff] [ 0.709921] pci_bus 0000:04: resource 1 [mem 0xfb400000-0xfb4fffff] [ 0.710041] pci_bus 0000:04: resource 2 [mem 0xfba00000-0xfbefffff 64bit pref] [ 0.710186] pci_bus 0000:07: resource 0 [io 0xe000-0xefff] [ 0.710303] pci_bus 0000:07: resource 1 [mem 0xfb300000-0xfb3fffff] [ 0.710429] pci_bus 0000:08: resource 0 [io 0xd000-0xdfff] [ 0.710559] pci_bus 0000:08: resource 1 [mem 0xfb200000-0xfb2fffff] [ 0.710682] pci_bus 0000:09: resource 0 [io 0xc000-0xcfff] [ 0.710798] pci_bus 0000:09: resource 1 [mem 0xfa000000-0xfb0fffff] [ 0.710918] pci_bus 0000:0a: resource 0 [io 0xc000-0xcfff] [ 0.711034] pci_bus 0000:0a: resource 1 [mem 0xfa000000-0xfb0fffff] [ 0.711153] pci_bus 0000:0b: resource 0 [io 0xb000-0xbfff] [ 0.711270] pci_bus 0000:0b: resource 1 [mem 0xfb100000-0xfb1fffff] [ 0.711389] pci_bus 0000:0b: resource 2 [mem 0x90000000-0x900fffff 64bit pref] [ 0.711957] pci 0000:00:05.0: disabled boot interrupts on device [8086:6f28] [ 0.712169] xen: registering gsi 19 triggering 0 polarity 1 [ 0.712201] xen: --> pirq=19 -> irq=19 (gsi=19) [ 0.721022] xen: registering gsi 18 triggering 0 polarity 1 [ 0.721048] xen: --> pirq=18 -> irq=18 (gsi=18) [ 0.736716] pci 0000:00:1a.0: quirk_usb_early_handoff+0x0/0x7c0 took 15375 usecs [ 0.736958] xen: registering gsi 18 triggering 0 polarity 1 [ 0.736964] Already setup the GSI :18 [ 0.752026] pci 0000:00:1d.0: quirk_usb_early_handoff+0x0/0x7c0 took 14764 usecs [ 0.752244] pci 0000:04:00.0: CLS mismatch (64 != 32), using 64 bytes [ 0.752423] PCI-DMA: Using software bounce buffering for IO (SWIOTLB) [ 0.752498] Unpacking initramfs... [ 0.752556] software IO TLB: mapped [mem 0x000000001b180000-0x000000001f180000] (64MB) [ 0.752632] kvm_intel: VMX not supported by CPU 6 [ 0.752947] kvm_amd: CPU 6 isn't AMD or Hygon [ 0.753063] clocksource: tsc: mask: 0xffffffffffffffff max_cycles: 0x1fb633008a4, max_idle_ns: 440795292230 ns [ 0.753294] clocksource: Switched to clocksource tsc [ 0.759914] Initialise system trusted keyrings [ 0.760217] workingset: timestamp_bits=62 max_order=17 bucket_order=0 [ 0.760587] NFS: Registering the id_resolver key type [ 0.760718] Key type id_resolver registered [ 0.760830] Key type id_legacy registered [ 0.761064] 9p: Installing v9fs 9p2000 file system support [ 0.778679] Key type asymmetric registered [ 0.778813] Asymmetric key parser 'x509' registered [ 0.778953] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 251) [ 0.779110] io scheduler mq-deadline registered [ 0.779225] io scheduler kyber registered [ 0.779931] xen: registering gsi 16 triggering 0 polarity 1 [ 0.779964] xen: --> pirq=16 -> irq=16 (gsi=16) [ 0.780339] xen: registering gsi 16 triggering 0 polarity 1 [ 0.780345] Already setup the GSI :16 [ 0.780814] xen: registering gsi 16 triggering 0 polarity 1 [ 0.780820] Already setup the GSI :16 [ 0.781139] xen: registering gsi 16 triggering 0 polarity 1 [ 0.781144] Already setup the GSI :16 [ 0.781474] xen: registering gsi 16 triggering 0 polarity 1 [ 0.781479] Already setup the GSI :16 [ 0.781964] xen: registering gsi 16 triggering 0 polarity 1 [ 0.781969] Already setup the GSI :16 [ 0.782418] xen: registering gsi 16 triggering 0 polarity 1 [ 0.782435] Already setup the GSI :16 [ 0.782882] xen: registering gsi 17 triggering 0 polarity 1 [ 0.782901] xen: --> pirq=17 -> irq=17 (gsi=17) [ 0.783238] xen: registering gsi 19 triggering 0 polarity 1 [ 0.783243] Already setup the GSI :19 [ 0.783720] xen: registering gsi 16 triggering 0 polarity 1 [ 0.783725] Already setup the GSI :16 [ 0.784386] input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input0 [ 0.784587] ACPI: button: Power Button [PWRB] [ 0.784734] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input1 [ 0.784996] ACPI: button: Power Button [PWRF] [ 0.785282] Monitor-Mwait will be used to enter C-1 state [ 0.785318] Monitor-Mwait will be used to enter C-2 state [ 0.785334] ACPI: \_SB_.SCK0.CP00: Found 2 idle states [ 0.785729] ACPI: \_SB_.SCK0.CP01: Found 2 idle states [ 0.786271] ACPI: \_SB_.SCK0.CP02: Found 2 idle states [ 0.786976] ACPI: \_SB_.SCK0.CP03: Found 2 idle states [ 0.787408] ACPI: \_SB_.SCK0.CP04: Found 2 idle states [ 0.787867] ACPI: \_SB_.SCK0.CP05: Found 2 idle states [ 0.788163] ACPI: \_SB_.SCK0.CP06: Found 2 idle states [ 0.788639] ACPI: \_SB_.SCK0.CP07: Found 2 idle states [ 0.789565] xen:xen_evtchn: Event-channel device installed [ 0.789780] xen_pciback: backend is vpci [ 0.790612] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled [ 0.791006] 00:04: ttyS1 at I/O 0x2f8 (irq = 3, base_baud = 115200) is a 16550A [ 0.791846] hpet_acpi_add: no address or irqs in _CRS [ 0.792063] Non-volatile memory driver v1.3 [ 0.794488] loop: module loaded [ 0.800585] mei_me 0000:00:16.0: Device doesn't have valid ME Interface [ 0.800637] ahci 0000:00:1f.2: version 3.0 [ 0.800809] xen: registering gsi 16 triggering 0 polarity 1 [ 0.800819] Already setup the GSI :16 [ 0.801170] ahci 0000:00:1f.2: AHCI vers 0001.0300, 32 command slots, 6 Gbps, SATA mode [ 0.801321] ahci 0000:00:1f.2: 6/6 ports implemented (port mask 0x3f) [ 0.801457] ahci 0000:00:1f.2: flags: 64bit ncq led clo pio ems apst [ 0.817127] scsi host0: ahci [ 0.817497] scsi host1: ahci [ 0.817938] scsi host2: ahci [ 0.818242] scsi host3: ahci [ 0.818577] scsi host4: ahci [ 0.818876] scsi host5: ahci [ 0.819057] ata1: SATA max UDMA/133 abar m2048@0xfb612000 port 0xfb612100 irq 83 lpm-pol 0 [ 0.819207] ata2: SATA max UDMA/133 abar m2048@0xfb612000 port 0xfb612180 irq 83 lpm-pol 0 [ 0.819354] ata3: SATA max UDMA/133 abar m2048@0xfb612000 port 0xfb612200 irq 83 lpm-pol 0 [ 0.819517] ata4: SATA max UDMA/133 abar m2048@0xfb612000 port 0xfb612280 irq 83 lpm-pol 0 [ 0.819665] ata5: SATA max UDMA/133 abar m2048@0xfb612000 port 0xfb612300 irq 83 lpm-pol 0 [ 0.819812] ata6: SATA max UDMA/133 abar m2048@0xfb612000 port 0xfb612380 irq 83 lpm-pol 0 [ 0.820279] tun: Universal TUN/TAP device driver, 1.6 [ 0.820616] e100: Intel(R) PRO/100 Network Driver [ 0.820744] e100: Copyright(c) 1999-2006 Intel Corporation [ 0.820884] sky2: driver version 1.30 [ 0.822170] xen_netfront: Initialising Xen virtual ethernet driver [ 0.822615] xen: registering gsi 19 triggering 0 polarity 1 [ 0.822625] Already setup the GSI :19 [ 0.822672] xen: registering gsi 18 triggering 0 polarity 1 [ 0.822744] Already setup the GSI :18 [ 0.822820] xen: registering gsi 18 triggering 0 polarity 1 [ 0.822863] xhci_hcd 0000:00:14.0: xHCI Host Controller [ 0.822868] Already setup the GSI :18 [ 0.823009] xhci_hcd 0000:00:14.0: new USB bus registered, assigned bus number 1 [ 0.824342] xhci_hcd 0000:00:14.0: hcc params 0x200077c1 hci version 0x100 quirks 0x0000000000009810 [ 0.824859] xhci_hcd 0000:00:14.0: xHCI Host Controller [ 0.824886] ehci-pci 0000:00:1a.0: EHCI Host Controller [ 0.825080] xhci_hcd 0000:00:14.0: new USB bus registered, assigned bus number 2 [ 0.825179] ehci-pci 0000:00:1a.0: new USB bus registered, assigned bus number 3 [ 0.825247] xhci_hcd 0000:00:14.0: Host supports USB 3.0 SuperSpeed [ 0.825290] ehci-pci 0000:00:1a.0: debug port 2 [ 0.825616] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 6.10 [ 0.825799] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 0.825958] usb usb1: Product: xHCI Host Controller [ 0.826076] usb usb1: Manufacturer: Linux 6.10.0-rc4+ xhci-hcd [ 0.826196] usb usb1: SerialNumber: 0000:00:14.0 [ 0.826608] hub 1-0:1.0: USB hub found [ 0.826768] hub 1-0:1.0: 8 ports detected [ 0.828152] usb usb2: New USB device found, idVendor=1d6b, idProduct=0003, bcdDevice= 6.10 [ 0.828310] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 0.828477] usb usb2: Product: xHCI Host Controller [ 0.828595] usb usb2: Manufacturer: Linux 6.10.0-rc4+ xhci-hcd [ 0.828731] usb usb2: SerialNumber: 0000:00:14.0 [ 0.829084] hub 2-0:1.0: USB hub found [ 0.829233] hub 2-0:1.0: 6 ports detected [ 0.829634] ehci-pci 0000:00:1a.0: irq 18, io mem 0xfb614000 [ 0.830448] usbcore: registered new interface driver usblp [ 0.830581] usbcore: registered new interface driver usb-storage [ 0.830728] i8042: PNP: No PS/2 controller found. [ 0.831043] rtc_cmos 00:00: RTC can wake from S4 [ 0.831691] rtc_cmos 00:00: registered as rtc0 [ 0.831849] rtc_cmos 00:00: alarms up to one month, y3k, 114 bytes nvram [ 0.832037] device-mapper: uevent: version 1.0.3 [ 0.832237] device-mapper: ioctl: 4.48.0-ioctl (2023-03-01) initialised: dm-devel@lists.linux.dev [ 0.832318] xen: registering gsi 18 triggering 0 polarity 1 [ 0.832402] Already setup the GSI :18 [ 0.832404] intel_pstate: CPU model not supported [ 0.832469] i801_smbus 0000:00:1f.3: SPD Write Disable is set [ 0.832560] hid: raw HID events driver (C) Jiri Kosina [ 0.832664] i801_smbus 0000:00:1f.3: SMBus using PCI interrupt [ 0.832897] usbcore: registered new interface driver usbhid [ 0.833139] usbhid: USB HID core driver [ 0.833752] Initializing XFRM netlink socket [ 0.833920] NET: Registered PF_INET6 protocol family [ 0.834481] Segment Routing with IPv6 [ 0.834605] In-situ OAM (IOAM) with IPv6 [ 0.834748] sit: IPv6, IPv4 and MPLS over IPv4 tunneling driver [ 0.835005] NET: Registered PF_PACKET protocol family [ 0.835148] 9pnet: Installing 9P2000 support [ 0.835276] Key type dns_resolver registered [ 0.836319] IPI shorthand broadcast: enabled [ 0.836474] ehci-pci 0000:00:1a.0: USB 2.0 started, EHCI 1.00 [ 0.836808] usb usb3: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 6.10 [ 0.836996] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 0.837141] usb usb3: Product: EHCI Host Controller [ 0.837256] usb usb3: Manufacturer: Linux 6.10.0-rc4+ ehci_hcd [ 0.837375] usb usb3: SerialNumber: 0000:00:1a.0 [ 0.837875] hub 3-0:1.0: USB hub found [ 0.838024] hub 3-0:1.0: 2 ports detected [ 0.838467] ehci-pci 0000:00:1d.0: EHCI Host Controller [ 0.838698] ehci-pci 0000:00:1d.0: new USB bus registered, assigned bus number 4 [ 0.838878] ehci-pci 0000:00:1d.0: debug port 2 [ 0.839590] sched_clock: Marking stable (799004974, 40422727)->(1724326232, -884898531) [ 0.840196] Timer migration: 1 hierarchy levels; 8 children per group; 1 crossnode level [ 0.842963] ehci-pci 0000:00:1d.0: irq 18, io mem 0xfb613000 [ 0.843689] registered taskstats version 1 [ 0.843810] Loading compiled-in X.509 certificates [ 0.845483] PM: Magic number: 12:467:45 [ 0.845725] printk: legacy console [netcon0] enabled [ 0.845844] netconsole: network logging started [ 0.846233] cfg80211: Loading compiled-in X.509 certificates for regulatory database [ 0.849505] ehci-pci 0000:00:1d.0: USB 2.0 started, EHCI 1.00 [ 0.849833] usb usb4: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 6.10 [ 0.849990] usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 0.850137] usb usb4: Product: EHCI Host Controller [ 0.850252] usb usb4: Manufacturer: Linux 6.10.0-rc4+ ehci_hcd [ 0.850371] usb usb4: SerialNumber: 0000:00:1d.0 [ 0.850706] hub 4-0:1.0: USB hub found [ 0.850855] hub 4-0:1.0: 2 ports detected [ 0.865874] Freeing initrd memory: 20120K [ 0.878002] Loaded X.509 cert 'sforshee: 00b28ddf47aef9cea7' [ 0.878347] Loaded X.509 cert 'wens: 61c038651aabdcf94bd0ac7ff06c7248db18c600' [ 0.878526] ALSA device list: [ 0.878669] No soundcards found. [ 0.879352] cfg80211: loaded regulatory.db is malformed or signature is missing/invalid [ 1.068590] usb 1-3: new high-speed USB device number 2 using xhci_hcd [ 1.076608] usb 3-1: new high-speed USB device number 2 using ehci-pci [ 1.092524] usb 4-1: new high-speed USB device number 2 using ehci-pci [ 1.129423] ata3: SATA link up 6.0 Gbps (SStatus 133 SControl 300) [ 1.129641] ata5: SATA link down (SStatus 0 SControl 300) [ 1.129787] ata1: SATA link down (SStatus 0 SControl 300) [ 1.129925] ata6: SATA link down (SStatus 0 SControl 300) [ 1.130082] ata4: SATA link down (SStatus 0 SControl 300) [ 1.130224] ata2: SATA link down (SStatus 0 SControl 300) [ 1.130648] ata3.00: ATA-10: HGST HUS722T1TALA604, RAGNWA05, max UDMA/133 [ 1.196196] usb 1-3: New USB device found, idVendor=05e3, idProduct=0610, bcdDevice=32.98 [ 1.196352] usb 1-3: New USB device strings: Mfr=0, Product=1, SerialNumber=0 [ 1.196491] usb 1-3: Product: USB2.0 Hub [ 1.197381] hub 1-3:1.0: USB hub found [ 1.197891] hub 1-3:1.0: 4 ports detected [ 1.204976] usb 3-1: New USB device found, idVendor=8087, idProduct=8008, bcdDevice= 0.05 [ 1.205213] usb 3-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0 [ 1.205590] hub 3-1:1.0: USB hub found [ 1.205816] hub 3-1:1.0: 4 ports detected [ 1.220940] usb 4-1: New USB device found, idVendor=8087, idProduct=8000, bcdDevice= 0.05 [ 1.221104] usb 4-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0 [ 1.221239] ata3.00: 1953525168 sectors, multi 16: LBA48 NCQ (depth 32), AA [ 1.221372] ata3.00: Features: NCQ-sndrcv NCQ-prio [ 1.221477] hub 4-1:1.0: USB hub found [ 1.221692] hub 4-1:1.0: 4 ports detected [ 1.249565] ata3.00: configured for UDMA/133 [ 1.250125] scsi 2:0:0:0: Direct-Access ATA HGST HUS722T1TAL WA05 PQ: 0 ANSI: 5 [ 1.250982] sd 2:0:0:0: Attached scsi generic sg0 type 0 [ 1.251101] sd 2:0:0:0: [sda] 1953525168 512-byte logical blocks: (1.00 TB/932 GiB) [ 1.251301] sd 2:0:0:0: [sda] Write Protect is off [ 1.251451] sd 2:0:0:0: [sda] Mode Sense: 00 3a 00 00 [ 1.251531] sd 2:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 1.251828] sd 2:0:0:0: [sda] Preferred minimum I/O size 512 bytes [ 1.267914] sda: sda1 sda2 < sda5 > [ 1.268316] sd 2:0:0:0: [sda] Attached SCSI disk [ 1.270175] Freeing unused kernel image (initmem) memory: 2680K [ 1.270318] Write protecting the kernel read-only data: 24576k [ 1.290156] Freeing unused kernel image (rodata/data gap) memory: 2028K [ 1.314521] usb 1-4: new high-speed USB device number 3 using xhci_hcd [ 1.440765] usb 1-4: New USB device found, idVendor=0557, idProduct=7000, bcdDevice= 0.00 [ 1.440922] usb 1-4: New USB device strings: Mfr=0, Product=0, SerialNumber=0 [ 1.441635] hub 1-4:1.0: USB hub found [ 1.441851] hub 1-4:1.0: 4 ports detected [ 1.734446] usb 1-4.1: new low-speed USB device number 4 using xhci_hcd [ 1.764445] x86/mm: Checked W+X mappings: passed, no W+X pages found. [ 1.764639] Run /init as init process [ 1.764759] with arguments: [ 1.764760] /init [ 1.764761] placeholder [ 1.764762] with environment: [ 1.764763] HOME=/ [ 1.764765] TERM=linux [ 1.837789] usb 1-4.1: New USB device found, idVendor=0557, idProduct=2419, bcdDevice= 1.00 [ 1.837948] usb 1-4.1: New USB device strings: Mfr=0, Product=0, SerialNumber=0 [ 1.844197] input: HID 0557:2419 as /devices/pci0000:00/0000:00:14.0/usb1/1-4/1-4.1/1-4.1:1.0/0003:0557:2419.0001/input/input2 [ 1.895749] hid-generic 0003:0557:2419.0001: input,hidraw0: USB HID v1.00 Keyboard [HID 0557:2419] on usb-0000:00:14.0-4.1/input0 [ 1.899100] input: HID 0557:2419 as /devices/pci0000:00/0000:00:14.0/usb1/1-4/1-4.1/1-4.1:1.1/0003:0557:2419.0002/input/input3 [ 1.899581] hid-generic 0003:0557:2419.0002: input,hidraw1: USB HID v1.00 Mouse [HID 0557:2419] on usb-0000:00:14.0-4.1/input1 [ 1.932509] usb 1-3.2: new high-speed USB device number 5 using xhci_hcd [ 2.009941] usb 1-3.2: New USB device found, idVendor=05e3, idProduct=0610, bcdDevice=32.98 [ 2.010108] usb 1-3.2: New USB device strings: Mfr=0, Product=1, SerialNumber=0 [ 2.010255] usb 1-3.2: Product: USB2.0 Hub [ 2.011097] hub 1-3.2:1.0: USB hub found [ 2.011548] hub 1-3.2:1.0: 4 ports detected [ 2.197003] ixgbe: Intel(R) 10 Gigabit PCI Express Network Driver [ 2.197146] ixgbe: Copyright (c) 1999-2016 Intel Corporation. [ 2.197591] ACPI Warning: \_SB.PCI0.BR2C._PRT: Return Package has no elements (empty) (20240322/nsprepkg-94) [ 2.198973] xen: registering gsi 16 triggering 0 polarity 1 [ 2.198985] Already setup the GSI :16 [ 2.202089] igb: Intel(R) Gigabit Ethernet Network Driver [ 2.202213] igb: Copyright (c) 2007-2014 Intel Corporation. [ 2.202402] xen: registering gsi 16 triggering 0 polarity 1 [ 2.202409] Already setup the GSI :16 [ 2.231853] pps pps0: new PPS source ptp0 [ 2.232049] igb 0000:07:00.0: added PHC on eth0 [ 2.232185] igb 0000:07:00.0: Intel(R) Gigabit Ethernet Network Connection [ 2.232306] igb 0000:07:00.0: eth0: (PCIe:2.5Gb/s:Width x1) 0c:c4:7a:93:a4:c8 [ 2.232486] igb 0000:07:00.0: eth0: PBA No: 010C00-000 [ 2.232619] igb 0000:07:00.0: Using MSI-X interrupts. 4 rx queue(s), 4 tx queue(s) [ 2.232854] xen: registering gsi 17 triggering 0 polarity 1 [ 2.232862] Already setup the GSI :17 [ 2.262416] pps pps1: new PPS source ptp1 [ 2.262657] igb 0000:08:00.0: added PHC on eth1 [ 2.262792] igb 0000:08:00.0: Intel(R) Gigabit Ethernet Network Connection [ 2.262913] igb 0000:08:00.0: eth1: (PCIe:2.5Gb/s:Width x1) 0c:c4:7a:93:a4:c9 [ 2.263079] igb 0000:08:00.0: eth1: PBA No: 010000-000 [ 2.263195] igb 0000:08:00.0: Using MSI-X interrupts. 4 rx queue(s), 4 tx queue(s) [ 2.263445] xen: registering gsi 16 triggering 0 polarity 1 [ 2.263453] Already setup the GSI :16 [ 2.320951] igb 0000:0b:00.0: added PHC on eth2 [ 2.321093] igb 0000:0b:00.0: Intel(R) Gigabit Ethernet Network Connection [ 2.321215] igb 0000:0b:00.0: eth2: (PCIe:5.0Gb/s:Width x4) 0c:c4:7a:93:a4:ca [ 2.321419] igb 0000:0b:00.0: eth2: PBA No: 010000-000 [ 2.321549] igb 0000:0b:00.0: Using MSI-X interrupts. 8 rx queue(s), 8 tx queue(s) [ 2.321786] xen: registering gsi 17 triggering 0 polarity 1 [ 2.321795] Already setup the GSI :17 [ 2.377830] igb 0000:0b:00.1: added PHC on eth3 [ 2.377972] igb 0000:0b:00.1: Intel(R) Gigabit Ethernet Network Connection [ 2.378094] igb 0000:0b:00.1: eth3: (PCIe:5.0Gb/s:Width x4) 0c:c4:7a:93:a4:cb [ 2.378299] igb 0000:0b:00.1: eth3: PBA No: 010000-000 [ 2.378418] igb 0000:0b:00.1: Using MSI-X interrupts. 8 rx queue(s), 8 tx queue(s) [ 2.378690] xen: registering gsi 18 triggering 0 polarity 1 [ 2.378698] Already setup the GSI :18 [ 2.435700] igb 0000:0b:00.2: added PHC on eth4 [ 2.435878] igb 0000:0b:00.2: Intel(R) Gigabit Ethernet Network Connection [ 2.436000] igb 0000:0b:00.2: eth4: (PCIe:5.0Gb/s:Width x4) 0c:c4:7a:93:a4:cc [ 2.436204] igb 0000:0b:00.2: eth4: PBA No: 010000-000 [ 2.436320] igb 0000:0b:00.2: Using MSI-X interrupts. 8 rx queue(s), 8 tx queue(s) [ 2.436575] xen: registering gsi 19 triggering 0 polarity 1 [ 2.436584] Already setup the GSI :19 [ 2.492834] igb 0000:0b:00.3: added PHC on eth5 [ 2.492978] igb 0000:0b:00.3: Intel(R) Gigabit Ethernet Network Connection [ 2.493100] igb 0000:0b:00.3: eth5: (PCIe:5.0Gb/s:Width x4) 0c:c4:7a:93:a4:cd [ 2.493304] igb 0000:0b:00.3: eth5: PBA No: 010000-000 [ 2.493420] igb 0000:0b:00.3: Using MSI-X interrupts. 8 rx queue(s), 8 tx queue(s) [ 2.495643] igb 0000:07:00.0 enx0cc47a93a4c8: renamed from eth0 [ 2.496460] igb 0000:08:00.0 enx0cc47a93a4c9: renamed from eth1 [ 2.496959] igb 0000:0b:00.0 enx0cc47a93a4ca: renamed from eth2 [ 2.497649] igb 0000:0b:00.1 enx0cc47a93a4cb: renamed from eth3 [ 2.498122] igb 0000:0b:00.2 enx0cc47a93a4cc: renamed from eth4 [ 2.502210] igb 0000:0b:00.3 enx0cc47a93a4cd: renamed from eth5 [ 2.933047] ixgbe 0000:04:00.0: Multiqueue Enabled: Rx Queue count = 8, Tx Queue count = 8 XDP Queue count = 0 [ 3.060645] ixgbe 0000:04:00.0: MAC: 5, PHY: 0, PBA No: 020B00-000 [ 3.060883] ixgbe 0000:04:00.0: 0c:c4:7a:93:a8:9e [ 3.352400] ixgbe 0000:04:00.0: Intel(R) 10 Gigabit Network Connection [ 3.352755] ACPI Warning: \_SB.PCI0.BR2C._PRT: Return Package has no elements (empty) (20240322/nsprepkg-94) [ 3.352974] xen: registering gsi 17 triggering 0 polarity 1 [ 3.352985] Already setup the GSI :17 [ 4.092544] ixgbe 0000:04:00.1: Multiqueue Enabled: Rx Queue count = 8, Tx Queue count = 8 XDP Queue count = 0 [ 4.222047] ixgbe 0000:04:00.1: MAC: 5, PHY: 0, PBA No: 020B00-000 [ 4.222209] ixgbe 0000:04:00.1: 0c:c4:7a:93:a8:9f [ 4.512624] ixgbe 0000:04:00.1: Intel(R) 10 Gigabit Network Connection [ 4.514998] ixgbe 0000:04:00.1 enx0cc47a93a89f: renamed from eth1 [ 4.515399] ixgbe 0000:04:00.0 enx0cc47a93a89e: renamed from eth0 [ 4.930885] EXT4-fs (dm-0): mounting ext3 file system using the ext4 subsystem [ 4.938677] EXT4-fs (dm-0): mounted filesystem d65d677e-26fd-433b-a702-546173027eea ro with ordered data mode. Quota mode: none. [ 8.590667] EXT4-fs (dm-0): re-mounted d65d677e-26fd-433b-a702-546173027eea r/w. Quota mode: none. [ 9.499603] EXT4-fs (sda1): mounting ext3 file system using the ext4 subsystem [ 9.523687] EXT4-fs (sda1): mounted filesystem bcf6c6b9-ed8b-420b-b2f7-a7de1505fb51 r/w with ordered data mode. Quota mode: none. [ 9.616040] Adding 1949692k swap on /dev/mapper/debina1--vg-swap_1. Priority:-2 extents:1 across:1949692k [ 11.183311] xenbr0: port 1(enx0cc47a93a4c8) entered blocking state [ 11.183511] xenbr0: port 1(enx0cc47a93a4c8) entered disabled state [ 11.183646] igb 0000:07:00.0 enx0cc47a93a4c8: entered allmulticast mode [ 11.183814] igb 0000:07:00.0 enx0cc47a93a4c8: entered promiscuous mode [ 14.160979] igb 0000:07:00.0 enx0cc47a93a4c8: igb: enx0cc47a93a4c8 NIC Link is Up 1000 Mbps Full Duplex, Flow Control: RX [ 14.370941] xenbr0: port 1(enx0cc47a93a4c8) entered blocking state [ 14.371136] xenbr0: port 1(enx0cc47a93a4c8) entered forwarding state