[ 0.000000] Linux version 6.10.0-rc4+ (osstest@himrod1) (gcc (Debian 12.2.0-14) 12.2.0, GNU ld (GNU Binutils for Debian) 2.40) #1 SMP PREEMPT_DYNAMIC Tue Jun 18 04:25:48 UTC 2024 [ 0.000000] Command line: placeholder root=/dev/mapper/italia1--vg-root ro console=hvc0 [ 0.000000] Released 0 page(s) [ 0.000000] BIOS-provided physical RAM map: [ 0.000000] Xen: [mem 0x0000000000000000-0x000000000009afff] usable [ 0.000000] Xen: [mem 0x000000000009bc00-0x00000000000fffff] reserved [ 0.000000] Xen: [mem 0x0000000000100000-0x0000000020064fff] usable [ 0.000000] Xen: [mem 0x00000000ab9ba000-0x00000000bba3afff] ACPI NVS [ 0.000000] Xen: [mem 0x00000000bc60a000-0x00000000bc73ffff] reserved [ 0.000000] Xen: [mem 0x00000000beaee000-0x00000000beaf8fff] reserved [ 0.000000] Xen: [mem 0x00000000beb05000-0x00000000beb15fff] reserved [ 0.000000] Xen: [mem 0x00000000bed3a000-0x00000000beddffff] reserved [ 0.000000] Xen: [mem 0x00000000bede0000-0x00000000befdffff] ACPI NVS [ 0.000000] Xen: [mem 0x00000000befe0000-0x00000000beffefff] ACPI data [ 0.000000] Xen: [mem 0x00000000bf000000-0x00000000bfffffff] reserved [ 0.000000] Xen: [mem 0x00000000f8000000-0x00000000fbffffff] reserved [ 0.000000] Xen: [mem 0x00000000fec00000-0x00000000fec00fff] reserved [ 0.000000] Xen: [mem 0x00000000fed19000-0x00000000fed19fff] reserved [ 0.000000] Xen: [mem 0x00000000fed1c000-0x00000000fed1ffff] reserved [ 0.000000] Xen: [mem 0x00000000fed90000-0x00000000fed90fff] reserved [ 0.000000] Xen: [mem 0x00000000fee00000-0x00000000feefffff] reserved [ 0.000000] Xen: [mem 0x00000000ffa00000-0x00000000ffffffff] reserved [ 0.000000] NX (Execute Disable) protection: active [ 0.000000] APIC: Static calls initialized [ 0.000000] SMBIOS 2.6 present. [ 0.000000] DMI: Intel Corporation SandyBridge Platform/To be filled by O.E.M., BIOS S1200BT.86B.02.00.0042.050820141549 05/08/2014 [ 0.000000] DMI: Memory slots populated: 1/4 [ 0.000000] Hypervisor detected: Xen PV [ 0.000023] Xen PV: Detected 4 vCPUS [ 0.000487] tsc: Detected 3092.970 MHz processor [ 0.000896] e820: update [mem 0x00000000-0x00000fff] usable ==> reserved [ 0.000899] e820: remove [mem 0x000a0000-0x000fffff] usable [ 0.000906] last_pfn = 0x20065 max_arch_pfn = 0x400000000 [ 0.000908] MTRR map: 3 entries (0 fixed + 3 variable; max 20), built from 10 variable MTRRs [ 0.000910] MTRRs set to read-only [ 0.000913] x86/PAT: Configuration [0-7]: WB WT UC- UC WC WP UC UC [ 0.000950] Kernel/User page tables isolation: disabled on XEN PV. [ 0.024229] RAMDISK: [mem 0x04000000-0x053a4fff] [ 0.024236] ACPI: Early table checksum verification disabled [ 0.033765] ACPI: RSDP 0x00000000000F0410 000024 (v02 INTEL ) [ 0.033776] ACPI: XSDT 0x00000000BEFFDE18 0000BC (v01 INTEL S1200BTS 06222004 INTL 20090903) [ 0.033810] ACPI: FACP 0x00000000BEFFCA98 0000F4 (v04 INTEL S1200BTS 06222004 INTL 20090903) [ 0.033851] ACPI: DSDT 0x00000000BEFEE018 00CE48 (v02 INTEL S1200BTS 00000000 INTL 20100331) [ 0.033867] ACPI: FACS 0x00000000BEFFDD40 000040 [ 0.033883] ACPI: APIC 0x00000000BEFFB018 000652 (v03 INTEL S1200BTS 06222004 INTL 20090903) [ 0.033899] ACPI: SPMI 0x00000000BEFFEC18 000040 (v05 INTEL S1200BTS 06222004 INTL 20090903) [ 0.033915] ACPI: MCFG 0x00000000BEFFEB98 00003C (v01 INTEL S1200BTS 06222004 INTL 20090903) [ 0.033931] ACPI: WDDT 0x00000000BEFFEF18 000040 (v01 INTEL S1200BTS 06222004 INTL 20090903) [ 0.033947] ACPI: HPET 0x00000000BEFFEE98 000038 (v01 INTEL S1200BTS 06222004 INTL 20090903) [ 0.033963] ACPI: SSDT 0x00000000BEFEB018 0010A8 (v02 INTEL S1200BTS 00001000 INTL 20100331) [ 0.033979] ACPI: BOOT 0x00000000BEFFEE18 000028 (v01 INTEL S1200BTS 06222004 INTL 20090903) [ 0.033995] ACPI: SSDT 0x00000000BEFE7698 0005E0 (v02 INTEL S1200BTS 00003000 INTL 20100331) [ 0.034011] ACPI: SSDT 0x00000000BEFE6018 000A92 (v02 INTEL S1200BTS 00003000 INTL 20100331) [ 0.034027] ACPI: SSDT 0x00000000BEFEA598 00054D (v01 INTEL S1200BTS 00001000 INTL 20100331) [ 0.034043] ACPI: SSDT 0x00000000BEFFDB18 000069 (v01 INTEL S1200BTS 00001000 INTL 20100331) [ 0.034059] ACPI: SSDT 0x00000000BEFE9E18 00017B (v02 INTEL S1200BTS 00002000 INTL 20100331) [ 0.034075] ACPI: RMAD 0x00000000BEFE8F18 000078 (v01 INTEL S1200BTS 00000001 INTL 00000001) [ 0.034091] ACPI: SPCR 0x00000000BEFFED98 000050 (v01 INTEL S1200BTS 06222004 INTL 20090903) [ 0.034107] ACPI: HEST 0x00000000BEFFCF18 0000A8 (v01 INTEL S1200BTS 00000001 INTL 00000001) [ 0.034123] ACPI: BERT 0x00000000BEFFED18 000030 (v01 INTEL S1200BTS 00000001 INTL 00000001) [ 0.034139] ACPI: ERST 0x00000000BEFE8C98 000230 (v01 INTEL S1200BTS 00000001 INTL 00000001) [ 0.034155] ACPI: EINJ 0x00000000BEFFC918 000130 (v01 INTEL S1200BTS 00000001 INTL 00000001) [ 0.034163] ACPI: Reserving FACP table memory at [mem 0xbeffca98-0xbeffcb8b] [ 0.034165] ACPI: Reserving DSDT table memory at [mem 0xbefee018-0xbeffae5f] [ 0.034166] ACPI: Reserving FACS table memory at [mem 0xbeffdd40-0xbeffdd7f] [ 0.034167] ACPI: Reserving APIC table memory at [mem 0xbeffb018-0xbeffb669] [ 0.034168] ACPI: Reserving SPMI table memory at [mem 0xbeffec18-0xbeffec57] [ 0.034169] ACPI: Reserving MCFG table memory at [mem 0xbeffeb98-0xbeffebd3] [ 0.034169] ACPI: Reserving WDDT table memory at [mem 0xbeffef18-0xbeffef57] [ 0.034170] ACPI: Reserving HPET table memory at [mem 0xbeffee98-0xbeffeecf] [ 0.034171] ACPI: Reserving SSDT table memory at [mem 0xbefeb018-0xbefec0bf] [ 0.034172] ACPI: Reserving BOOT table memory at [mem 0xbeffee18-0xbeffee3f] [ 0.034173] ACPI: Reserving SSDT table memory at [mem 0xbefe7698-0xbefe7c77] [ 0.034173] ACPI: Reserving SSDT table memory at [mem 0xbefe6018-0xbefe6aa9] [ 0.034174] ACPI: Reserving SSDT table memory at [mem 0xbefea598-0xbefeaae4] [ 0.034175] ACPI: Reserving SSDT table memory at [mem 0xbeffdb18-0xbeffdb80] [ 0.034176] ACPI: Reserving SSDT table memory at [mem 0xbefe9e18-0xbefe9f92] [ 0.034177] ACPI: Reserving RMAD table memory at [mem 0xbefe8f18-0xbefe8f8f] [ 0.034177] ACPI: Reserving SPCR table memory at [mem 0xbeffed98-0xbeffede7] [ 0.034178] ACPI: Reserving HEST table memory at [mem 0xbeffcf18-0xbeffcfbf] [ 0.034179] ACPI: Reserving BERT table memory at [mem 0xbeffed18-0xbeffed47] [ 0.034180] ACPI: Reserving ERST table memory at [mem 0xbefe8c98-0xbefe8ec7] [ 0.034181] ACPI: Reserving EINJ table memory at [mem 0xbeffc918-0xbeffca47] [ 0.034275] APIC: Switched APIC routing to: Xen PV [ 0.039010] Zone ranges: [ 0.039011] DMA [mem 0x0000000000001000-0x0000000000ffffff] [ 0.039013] DMA32 [mem 0x0000000001000000-0x0000000020064fff] [ 0.039015] Normal empty [ 0.039016] Movable zone start for each node [ 0.039016] Early memory node ranges [ 0.039017] node 0: [mem 0x0000000000001000-0x000000000009afff] [ 0.039018] node 0: [mem 0x0000000000100000-0x0000000020064fff] [ 0.039019] Initmem setup node 0 [mem 0x0000000000001000-0x0000000020064fff] [ 0.039024] On node 0, zone DMA: 1 pages in unavailable ranges [ 0.039065] On node 0, zone DMA: 101 pages in unavailable ranges [ 0.040830] On node 0, zone DMA32: 32667 pages in unavailable ranges [ 0.040837] p2m virtual area at (____ptrval____), size is 40000000 [ 0.177027] Remapped 101 page(s) [ 0.177733] ACPI: PM-Timer IO Port: 0x408 [ 0.177895] ACPI: LAPIC_NMI (acpi_id[0xff] dfl dfl lint[0x1]) [ 0.177941] IOAPIC[0]: apic_id 2, version 32, address 0xfec00000, GSI 0-23 [ 0.177968] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl) [ 0.177971] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level) [ 0.178024] ACPI: Using ACPI (MADT) for SMP configuration information [ 0.178029] ACPI: HPET id: 0x8086a701 base: 0xfed00000 [ 0.178039] ACPI: SPCR: SPCR table version 1 [ 0.178042] ACPI: SPCR: console: uart,io,0x3f8,115200 [ 0.178051] CPU topo: Max. logical packages: 1 [ 0.178052] CPU topo: Max. logical dies: 1 [ 0.178052] CPU topo: Max. dies per package: 1 [ 0.178057] CPU topo: Max. threads per core: 1 [ 0.178058] CPU topo: Num. cores per package: 4 [ 0.178058] CPU topo: Num. threads per package: 4 [ 0.178059] CPU topo: Allowing 4 present CPUs plus 0 hotplug CPUs [ 0.178075] PM: hibernation: Registered nosave memory: [mem 0x00000000-0x00000fff] [ 0.178077] PM: hibernation: Registered nosave memory: [mem 0x0009b000-0x0009bfff] [ 0.178078] PM: hibernation: Registered nosave memory: [mem 0x0009c000-0x000fffff] [ 0.178079] [mem 0x20065000-0xab9b9fff] available for PCI devices [ 0.178088] Booting kernel on Xen [ 0.178089] Xen version: 4.19-unstable (preserve-AD) [ 0.178092] clocksource: refined-jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 1910969940391419 ns [ 0.183529] setup_percpu: NR_CPUS:64 nr_cpumask_bits:4 nr_cpu_ids:4 nr_node_ids:1 [ 0.183964] percpu: Embedded 57 pages/cpu s194408 r8192 d30872 u524288 [ 0.183969] pcpu-alloc: s194408 r8192 d30872 u524288 alloc=1*2097152 [ 0.183972] pcpu-alloc: [0] 0 1 2 3 [ 0.184022] xen: PV spinlocks enabled [ 0.184025] PV qspinlock hash table entries: 256 (order: 0, 4096 bytes, linear) [ 0.184027] Kernel command line: placeholder root=/dev/mapper/italia1--vg-root ro console=hvc0 [ 0.184062] Unknown kernel command line parameters "placeholder", will be passed to user space. [ 0.184153] Dentry cache hash table entries: 65536 (order: 7, 524288 bytes, linear) [ 0.184198] Inode-cache hash table entries: 32768 (order: 6, 262144 bytes, linear) [ 0.184885] Built 1 zonelists, mobility grouping on. Total pages: 131071 [ 0.184889] mem auto-init: stack:all(zero), heap alloc:off, heap free:off [ 0.184891] software IO TLB: area num 4. [ 0.247831] Memory: 386516K/524284K available (16384K kernel code, 2753K rwdata, 6164K rodata, 2680K init, 1864K bss, 137516K reserved, 0K cma-reserved) [ 0.248007] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1 [ 0.250228] Dynamic Preempt: voluntary [ 0.250395] rcu: Preemptible hierarchical RCU implementation. [ 0.250396] rcu: RCU event tracing is enabled. [ 0.250396] rcu: RCU restricting CPUs from NR_CPUS=64 to nr_cpu_ids=4. [ 0.250398] Trampoline variant of Tasks RCU enabled. [ 0.250399] rcu: RCU calculated value of scheduler-enlistment delay is 100 jiffies. [ 0.250400] rcu: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=4 [ 0.250422] RCU Tasks: Setting shift to 2 and lim to 1 rcu_task_cb_adjust=1. [ 0.262531] NR_IRQS: 4352, nr_irqs: 456, preallocated irqs: 16 [ 0.262688] xen:events: Using FIFO-based ABI [ 0.262718] xen: --> pirq=1 -> irq=1 (gsi=1) [ 0.262728] xen: --> pirq=2 -> irq=2 (gsi=2) [ 0.262737] xen: --> pirq=3 -> irq=3 (gsi=3) [ 0.262745] xen: --> pirq=4 -> irq=4 (gsi=4) [ 0.262754] xen: --> pirq=5 -> irq=5 (gsi=5) [ 0.262762] xen: --> pirq=6 -> irq=6 (gsi=6) [ 0.262771] xen: --> pirq=7 -> irq=7 (gsi=7) [ 0.262779] xen: --> pirq=8 -> irq=8 (gsi=8) [ 0.262788] xen: --> pirq=9 -> irq=9 (gsi=9) [ 0.262796] xen: --> pirq=10 -> irq=10 (gsi=10) [ 0.262807] xen: --> pirq=11 -> irq=11 (gsi=11) [ 0.262816] xen: --> pirq=12 -> irq=12 (gsi=12) [ 0.262825] xen: --> pirq=13 -> irq=13 (gsi=13) [ 0.262833] xen: --> pirq=14 -> irq=14 (gsi=14) [ 0.262842] xen: --> pirq=15 -> irq=15 (gsi=15) [ 0.262851] rcu: srcu_init: Setting srcu_struct sizes based on contention. [ 0.268118] Console: colour VGA+ 80x25 [ 0.268121] printk: legacy console [tty0] enabled [ 0.284435] printk: legacy console [hvc0] enabled [ 0.285836] ACPI: Core revision 20240322 [ 0.290261] clocksource: xen: mask: 0xffffffffffffffff max_cycles: 0x1cd42e4dffb, max_idle_ns: 881590591483 ns [ 0.290418] Xen: using vcpuop timer interface [ 0.290424] installing Xen timer for CPU 0 [ 0.290575] clocksource: tsc-early: mask: 0xffffffffffffffff max_cycles: 0x2c9556e1b50, max_idle_ns: 440795310707 ns [ 0.290734] Calibrating delay loop (skipped), value calculated using timer frequency.. 6185.94 BogoMIPS (lpj=3092970) [ 0.291045] Last level iTLB entries: 4KB 512, 2MB 8, 4MB 8 [ 0.291163] Last level dTLB entries: 4KB 512, 2MB 32, 4MB 32, 1GB 0 [ 0.291291] Spectre V1 : Mitigation: usercopy/swapgs barriers and __user pointer sanitization [ 0.291441] Spectre V2 : Mitigation: Retpolines [ 0.291555] Spectre V2 : Spectre v2 / SpectreRSB mitigation: Filling RSB on context switch [ 0.291877] Spectre V2 : Spectre v2 / SpectreRSB : Filling RSB on VMEXIT [ 0.291998] Spectre V2 : Enabling Restricted Speculation for firmware calls [ 0.292120] Spectre V2 : mitigation: Enabling conditional Indirect Branch Prediction Barrier [ 0.292269] Speculative Store Bypass: Mitigation: Speculative Store Bypass disabled via prctl [ 0.292740] MDS: Mitigation: Clear CPU buffers [ 0.292854] MMIO Stale Data: Unknown: No mitigations [ 0.292988] x86/fpu: Supporting XSAVE feature 0x001: 'x87 floating point registers' [ 0.293135] x86/fpu: Supporting XSAVE feature 0x002: 'SSE registers' [ 0.293259] x86/fpu: Supporting XSAVE feature 0x004: 'AVX registers' [ 0.293378] x86/fpu: xstate_offset[2]: 576, xstate_sizes[2]: 256 [ 0.293498] x86/fpu: Enabled xstate features 0x7, context size is 832 bytes, using 'standard' format. [ 0.311712] Freeing SMP alternatives memory: 40K [ 0.311741] pid_max: default: 32768 minimum: 301 [ 0.311871] LSM: initializing lsm=capability,selinux [ 0.311991] SELinux: Initializing. [ 0.312123] Mount-cache hash table entries: 1024 (order: 1, 8192 bytes, linear) [ 0.312271] Mountpoint-cache hash table entries: 1024 (order: 1, 8192 bytes, linear) [ 0.312731] cpu 0 spinlock event irq 25 [ 0.312854] VPMU disabled by hypervisor. [ 0.313519] Performance Events: unsupported p6 CPU model 58 no PMU driver, software events only. [ 0.313671] signal: max sigframe size: 1776 [ 0.313817] rcu: Hierarchical SRCU implementation. [ 0.313933] rcu: Max phase no-delay instances is 400. [ 0.314505] smp: Bringing up secondary CPUs ... [ 0.314906] installing Xen timer for CPU 1 [ 0.315396] installing Xen timer for CPU 2 [ 0.315874] installing Xen timer for CPU 3 [ 0.028878] [Firmware Bug]: CPU 1: APIC ID mismatch. CPUID: 0x0001 APIC: 0x0002 [ 0.316098] cpu 1 spinlock event irq 45 [ 0.028878] [Firmware Bug]: CPU 2: APIC ID mismatch. CPUID: 0x0002 APIC: 0x0004 [ 0.316783] cpu 2 spinlock event irq 46 [ 0.028878] [Firmware Bug]: CPU 3: APIC ID mismatch. CPUID: 0x0003 APIC: 0x0006 [ 0.317044] cpu 3 spinlock event irq 47 [ 0.317939] smp: Brought up 1 node, 4 CPUs [ 0.318180] devtmpfs: initialized [ 0.318180] x86/mm: Memory block size: 128MB [ 0.319022] ACPI: PM: Registering ACPI NVS region [mem 0xab9ba000-0xbba3afff] (268963840 bytes) [ 0.321071] ACPI: PM: Registering ACPI NVS region [mem 0xbede0000-0xbefdffff] (2097152 bytes) [ 0.321281] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 1911260446275000 ns [ 0.321438] futex hash table entries: 1024 (order: 4, 65536 bytes, linear) [ 0.321683] PM: RTC time: 06:21:45, date: 2024-06-18 [ 0.321885] NET: Registered PF_NETLINK/PF_ROUTE protocol family [ 0.322027] xen:grant_table: Grant tables using version 1 layout [ 0.322170] Grant table initialized [ 0.322406] audit: initializing netlink subsys (disabled) [ 0.322540] audit: type=2000 audit(1718691706.173:1): state=initialized audit_enabled=0 res=1 [ 0.322783] thermal_sys: Registered thermal governor 'step_wise' [ 0.322785] thermal_sys: Registered thermal governor 'user_space' [ 0.322932] Simple Boot Flag at 0x4f set to 0x1 [ 0.323185] ACPI FADT declares the system doesn't support PCIe ASPM, so disable it [ 0.323480] PCI: ECAM [mem 0xf8000000-0xfbffffff] (base 0xf8000000) for domain 0000 [bus 00-3f] [ 0.323742] PCI: ECAM [mem 0xf8000000-0xfbffffff] reserved as E820 entry [ 0.362123] PCI: Using configuration type 1 for base access [ 0.362294] kprobes: kprobe jump-optimization is enabled. All kprobes are optimized if possible. [ 0.362782] ACPI: Added _OSI(Module Device) [ 0.362896] ACPI: Added _OSI(Processor Device) [ 0.363021] ACPI: Added _OSI(3.0 _SCP Extensions) [ 0.363134] ACPI: Added _OSI(Processor Aggregator Device) [ 0.369597] ACPI: 7 ACPI AML tables successfully acquired and loaded [ 0.370326] xen: registering gsi 9 triggering 0 polarity 0 [ 0.370897] ACPI: [Firmware Bug]: BIOS _OSI(Linux) query ignored [ 0.372207] ACPI: Dynamic OEM Table Load: [ 0.372327] ACPI: SSDT 0xFFFF888003B9D000 00083B (v01 PmRef Cpu0Cst 00003001 INTL 20100331) [ 0.373049] ACPI: Dynamic OEM Table Load: [ 0.373165] ACPI: SSDT 0xFFFF888005A75400 000303 (v01 PmRef ApIst 00003000 INTL 20100331) [ 0.373759] ACPI: Dynamic OEM Table Load: [ 0.373875] ACPI: SSDT 0xFFFF888003B3CE00 000119 (v01 PmRef ApCst 00003000 INTL 20100331) [ 0.374800] ACPI: _OSC evaluated successfully for all CPUs [ 0.375055] ACPI: Interpreter enabled [ 0.375183] ACPI: PM: (supports S0 S1 S3 S5) [ 0.375296] ACPI: Using IOAPIC for interrupt routing [ 0.375436] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug [ 0.375587] PCI: Using E820 reservations for host bridge windows [ 0.375944] ACPI: Enabled 10 GPEs in block 00 to 3F [ 0.383100] acpi ABCDEFGH:00: ACPI dock station (docks/bays count: 1) [ 0.385665] ACPI: \_TZ_.FN00: New power resource [ 0.385798] ACPI: \_TZ_.FN01: New power resource [ 0.385972] ACPI: \_TZ_.FN02: New power resource [ 0.386146] ACPI: \_TZ_.FN03: New power resource [ 0.386318] ACPI: \_TZ_.FN04: New power resource [ 0.387159] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-3e]) [ 0.387284] acpi PNP0A08:00: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI HPX-Type3] [ 0.387863] acpi PNP0A08:00: _OSC: platform does not support [LTR] [ 0.388544] acpi PNP0A08:00: _OSC: OS now controls [PME PCIeCapability] [ 0.388666] acpi PNP0A08:00: FADT indicates ASPM is unsupported, using BIOS configuration [ 0.390251] PCI host bridge to bus 0000:00 [ 0.390365] pci_bus 0000:00: root bus resource [io 0x0000-0x0cf7 window] [ 0.390485] pci_bus 0000:00: root bus resource [io 0x0d00-0xffff window] [ 0.390605] pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff window] [ 0.390739] pci_bus 0000:00: root bus resource [mem 0x000d0000-0x000e7fff window] [ 0.390882] pci_bus 0000:00: root bus resource [mem 0xc0000000-0xfeafffff window] [ 0.391026] pci_bus 0000:00: root bus resource [mem 0xfed40000-0xfed44fff window] [ 0.391169] pci_bus 0000:00: root bus resource [bus 00-3e] [ 0.391328] pci 0000:00:00.0: [8086:0158] type 00 class 0x060000 conventional PCI endpoint [ 0.392023] pci 0000:00:19.0: [8086:1502] type 00 class 0x020000 conventional PCI endpoint [ 0.392246] pci 0000:00:19.0: BAR 0 [mem 0xc1b00000-0xc1b1ffff] [ 0.392406] pci 0000:00:19.0: BAR 1 [mem 0xc1b70000-0xc1b70fff] [ 0.392566] pci 0000:00:19.0: BAR 2 [io 0x4040-0x405f] [ 0.392566] pci 0000:00:19.0: PME# supported from D0 D3hot D3cold [ 0.392566] pci 0000:00:1a.0: [8086:1c2d] type 00 class 0x0c0320 conventional PCI endpoint [ 0.392606] pci 0000:00:1a.0: BAR 0 [mem 0xc1b60000-0xc1b603ff] [ 0.392732] pci 0000:00:1a.0: PME# supported from D0 D3hot D3cold [ 0.392732] pci 0000:00:1c.0: [8086:1c10] type 01 class 0x060400 PCIe Root Port [ 0.393841] pci 0000:00:1c.0: PCI bridge to [bus 01] [ 0.393974] pci 0000:00:1c.0: bridge window [io 0x3000-0x3fff] [ 0.394104] pci 0000:00:1c.0: bridge window [mem 0xc1000000-0xc19fffff] [ 0.394276] pci 0000:00:1c.0: bridge window [mem 0xc1c00000-0xc25fffff 64bit pref] [ 0.394711] pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold [ 0.395838] pci 0000:00:1c.0: Enabling MPC IRBNCE [ 0.395960] pci 0000:00:1c.0: Intel PCH root port ACS workaround enabled [ 0.396276] pci 0000:00:1c.4: [8086:1c18] type 01 class 0x060400 PCIe Root Port [ 0.396582] pci 0000:00:1c.4: PCI bridge to [bus 02] [ 0.396714] pci 0000:00:1c.4: bridge window [io 0x2000-0x2fff] [ 0.396750] pci 0000:00:1c.4: bridge window [mem 0xc1a00000-0xc1afffff] [ 0.397207] pci 0000:00:1c.4: PME# supported from D0 D3hot D3cold [ 0.397414] pci 0000:00:1c.4: Enabling MPC IRBNCE [ 0.397534] pci 0000:00:1c.4: Intel PCH root port ACS workaround enabled [ 0.397870] pci 0000:00:1d.0: [8086:1c26] type 00 class 0x0c0320 conventional PCI endpoint [ 0.398093] pci 0000:00:1d.0: BAR 0 [mem 0xc1b50000-0xc1b503ff] [ 0.398632] pci 0000:00:1d.0: PME# supported from D0 D3hot D3cold [ 0.398952] pci 0000:00:1e.0: [8086:244e] type 01 class 0x060401 conventional PCI bridge [ 0.399253] pci 0000:00:1e.0: PCI bridge to [bus 03] (subtractive decode) [ 0.399402] pci 0000:00:1e.0: bridge window [mem 0xc0000000-0xc0ffffff] [ 0.399912] pci 0000:00:1f.0: [8086:1c52] type 00 class 0x060100 conventional PCI endpoint [ 0.400706] pci 0000:00:1f.2: [8086:1c02] type 00 class 0x010601 conventional PCI endpoint [ 0.400814] pci 0000:00:1f.2: BAR 0 [io 0x4090-0x4097] [ 0.400970] pci 0000:00:1f.2: BAR 1 [io 0x4080-0x4083] [ 0.401123] pci 0000:00:1f.2: BAR 2 [io 0x4070-0x4077] [ 0.401278] pci 0000:00:1f.2: BAR 3 [io 0x4060-0x4063] [ 0.401434] pci 0000:00:1f.2: BAR 4 [io 0x4020-0x403f] [ 0.401587] pci 0000:00:1f.2: BAR 5 [mem 0xc1b40000-0xc1b407ff] [ 0.401955] pci 0000:00:1f.2: PME# supported from D3hot [ 0.402263] pci 0000:00:1f.3: [8086:1c22] type 00 class 0x0c0500 conventional PCI endpoint [ 0.402502] pci 0000:00:1f.3: BAR 0 [mem 0xc1b30000-0xc1b300ff 64bit] [ 0.402744] pci 0000:00:1f.3: BAR 4 [io 0x4000-0x401f] [ 0.403245] pci 0000:00:1c.0: PCI bridge to [bus 01] [ 0.403679] pci 0000:02:00.0: [8086:10d3] type 00 class 0x020000 PCIe Endpoint [ 0.403837] pci 0000:02:00.0: BAR 0 [mem 0xc1a00000-0xc1a1ffff] [ 0.404061] pci 0000:02:00.0: BAR 2 [io 0x2000-0x201f] [ 0.404228] pci 0000:02:00.0: BAR 3 [mem 0xc1a20000-0xc1a23fff] [ 0.404838] pci 0000:02:00.0: PME# supported from D0 D3hot D3cold [ 0.405383] pci 0000:00:1c.4: PCI bridge to [bus 02] [ 0.405645] pci_bus 0000:03: extended config space not accessible [ 0.405799] pci 0000:03:02.0: [126f:0712] type 00 class 0x030000 conventional PCI endpoint [ 0.406020] pci 0000:03:02.0: BAR 0 [mem 0xc0000000-0xc0ffffff] [ 0.406421] pci 0000:03:02.0: Video device with shadowed ROM at [mem 0x000c0000-0x000dffff] [ 0.407849] pci 0000:03:02.0: supports D1 D2 [ 0.408221] pci 0000:00:1e.0: PCI bridge to [bus 03] (subtractive decode) [ 0.408388] pci 0000:00:1e.0: bridge window [io 0x0000-0x0cf7 window] (subtractive decode) [ 0.408535] pci 0000:00:1e.0: bridge window [io 0x0d00-0xffff window] (subtractive decode) [ 0.408681] pci 0000:00:1e.0: bridge window [mem 0x000a0000-0x000bffff window] (subtractive decode) [ 0.408738] pci 0000:00:1e.0: bridge window [mem 0x000d0000-0x000e7fff window] (subtractive decode) [ 0.408888] pci 0000:00:1e.0: bridge window [mem 0xc0000000-0xfeafffff window] (subtractive decode) [ 0.409037] pci 0000:00:1e.0: bridge window [mem 0xfed40000-0xfed44fff window] (subtractive decode) [ 0.409298] pci_bus 0000:00: on NUMA node 0 [ 0.409458] xen: registering gsi 13 triggering 1 polarity 0 [ 0.409958] ACPI: PCI: Interrupt link LNKA configured for IRQ 11 [ 0.410150] ACPI: PCI: Interrupt link LNKB configured for IRQ 10 [ 0.410338] ACPI: PCI: Interrupt link LNKC configured for IRQ 0 [ 0.410457] ACPI: PCI: Interrupt link LNKC disabled [ 0.410639] ACPI: PCI: Interrupt link LNKD configured for IRQ 10 [ 0.410809] ACPI: PCI: Interrupt link LNKE configured for IRQ 3 [ 0.410995] ACPI: PCI: Interrupt link LNKF configured for IRQ 11 [ 0.411183] ACPI: PCI: Interrupt link LNKG configured for IRQ 5 [ 0.411369] ACPI: PCI: Interrupt link LNKH configured for IRQ 0 [ 0.411489] ACPI: PCI: Interrupt link LNKH disabled [ 0.411926] xen:balloon: Initialising balloon driver [ 0.412797] iommu: Default domain type: Translated [ 0.412914] iommu: DMA domain TLB invalidation policy: lazy mode [ 0.413082] SCSI subsystem initialized [ 0.413208] libata version 3.00 loaded. [ 0.413208] ACPI: bus type USB registered [ 0.413208] usbcore: registered new interface driver usbfs [ 0.413208] usbcore: registered new interface driver hub [ 0.413208] usbcore: registered new device driver usb [ 0.413243] pps_core: LinuxPPS API ver. 1 registered [ 0.413358] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti [ 0.413509] PTP clock support registered [ 0.413777] Advanced Linux Sound Architecture Driver Initialized. [ 0.414075] NetLabel: Initializing [ 0.414188] NetLabel: domain hash size = 128 [ 0.414301] NetLabel: protocols = UNLABELED CIPSOv4 CALIPSO [ 0.414432] NetLabel: unlabeled traffic allowed by default [ 0.414761] PCI: Using ACPI for IRQ routing [ 0.425515] PCI: pci_cache_line_size set to 64 bytes [ 0.425663] e820: reserve RAM buffer [mem 0x0009b000-0x0009ffff] [ 0.425665] e820: reserve RAM buffer [mem 0x20065000-0x23ffffff] [ 0.425765] pci 0000:03:02.0: vgaarb: setting as boot VGA device [ 0.425885] pci 0000:03:02.0: vgaarb: bridge control possible [ 0.426002] pci 0000:03:02.0: vgaarb: VGA device added: decodes=io+mem,owns=io+mem,locks=none [ 0.426150] vgaarb: loaded [ 0.427485] clocksource: Switched to clocksource tsc-early [ 0.428140] VFS: Disk quotas dquot_6.6.0 [ 0.428140] VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes) [ 0.428198] hugetlbfs: disabling because there are no supported hugepage sizes [ 0.428362] pnp: PnP ACPI init [ 0.428561] system 00:00: [io 0x0680-0x069f] has been reserved [ 0.428683] system 00:00: [io 0xffff] has been reserved [ 0.428838] system 00:00: [io 0xffff] has been reserved [ 0.428955] system 00:00: [io 0xffff] has been reserved [ 0.429071] system 00:00: [io 0x0400-0x0453] has been reserved [ 0.429189] system 00:00: [io 0x0458-0x047f] has been reserved [ 0.429312] system 00:00: [io 0x0500-0x057f] has been reserved [ 0.429430] system 00:00: [io 0x164e-0x164f] has been reserved [ 0.429549] system 00:00: [io 0x0900-0x090f] has been reserved [ 0.429667] system 00:00: [io 0x0295-0x0296] has been reserved [ 0.429810] xen: registering gsi 8 triggering 1 polarity 0 [ 0.429872] system 00:02: [io 0x0454-0x0457] has been reserved [ 0.430272] xen: registering gsi 4 triggering 1 polarity 0 [ 0.430276] Already setup the GSI :4 [ 0.430786] system 00:04: [mem 0xfed1c000-0xfed1ffff] has been reserved [ 0.430909] system 00:04: [mem 0xfed10000-0xfed17fff] has been reserved [ 0.431029] system 00:04: [mem 0xfed18000-0xfed18fff] has been reserved [ 0.431149] system 00:04: [mem 0xfed19000-0xfed19fff] has been reserved [ 0.431269] system 00:04: [mem 0xf8000000-0xfbffffff] has been reserved [ 0.431388] system 00:04: [mem 0xfed20000-0xfed3ffff] has been reserved [ 0.431508] system 00:04: [mem 0xfed90000-0xfed93fff] could not be reserved [ 0.431629] system 00:04: [mem 0xfed45000-0xfed8ffff] has been reserved [ 0.431759] system 00:04: [mem 0xff000000-0xffffffff] could not be reserved [ 0.431881] system 00:04: [mem 0xfee00000-0xfeefffff] has been reserved [ 0.432000] system 00:04: [mem 0xc1b90000-0xc1b90fff] has been reserved [ 0.432387] system 00:05: [mem 0x00000000-0x0009cfff] could not be reserved [ 0.432554] pnp: PnP ACPI: found 6 devices [ 0.461174] PM-Timer failed consistency check (0xffffff) - aborting. [ 0.461314] NET: Registered PF_INET protocol family [ 0.461474] IP idents hash table entries: 8192 (order: 4, 65536 bytes, linear) [ 0.461815] tcp_listen_portaddr_hash hash table entries: 256 (order: 0, 4096 bytes, linear) [ 0.461966] Table-perturb hash table entries: 65536 (order: 6, 262144 bytes, linear) [ 0.462112] TCP established hash table entries: 4096 (order: 3, 32768 bytes, linear) [ 0.462263] TCP bind hash table entries: 4096 (order: 5, 131072 bytes, linear) [ 0.462427] TCP: Hash tables configured (established 4096 bind 4096) [ 0.462562] UDP hash table entries: 256 (order: 1, 8192 bytes, linear) [ 0.462685] UDP-Lite hash table entries: 256 (order: 1, 8192 bytes, linear) [ 0.462863] NET: Registered PF_UNIX/PF_LOCAL protocol family [ 0.463222] RPC: Registered named UNIX socket transport module. [ 0.463347] RPC: Registered udp transport module. [ 0.463462] RPC: Registered tcp transport module. [ 0.463577] RPC: Registered tcp-with-tls transport module. [ 0.463692] RPC: Registered tcp NFSv4.1 backchannel transport module. [ 0.464161] pci 0000:00:1c.0: PCI bridge to [bus 01] [ 0.464286] pci 0000:00:1c.0: bridge window [io 0x3000-0x3fff] [ 0.464424] pci 0000:00:1c.0: bridge window [mem 0xc1000000-0xc19fffff] [ 0.464555] pci 0000:00:1c.0: bridge window [mem 0xc1c00000-0xc25fffff 64bit pref] [ 0.464723] pci 0000:00:1c.4: PCI bridge to [bus 02] [ 0.464858] pci 0000:00:1c.4: bridge window [io 0x2000-0x2fff] [ 0.464995] pci 0000:00:1c.4: bridge window [mem 0xc1a00000-0xc1afffff] [ 0.465150] pci 0000:00:1e.0: PCI bridge to [bus 03] [ 0.465283] pci 0000:00:1e.0: bridge window [mem 0xc0000000-0xc0ffffff] [ 0.465440] pci_bus 0000:00: resource 4 [io 0x0000-0x0cf7 window] [ 0.465560] pci_bus 0000:00: resource 5 [io 0x0d00-0xffff window] [ 0.465680] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff window] [ 0.465814] pci_bus 0000:00: resource 7 [mem 0x000d0000-0x000e7fff window] [ 0.465936] pci_bus 0000:00: resource 8 [mem 0xc0000000-0xfeafffff window] [ 0.466057] pci_bus 0000:00: resource 9 [mem 0xfed40000-0xfed44fff window] [ 0.466177] pci_bus 0000:01: resource 0 [io 0x3000-0x3fff] [ 0.466294] pci_bus 0000:01: resource 1 [mem 0xc1000000-0xc19fffff] [ 0.466414] pci_bus 0000:01: resource 2 [mem 0xc1c00000-0xc25fffff 64bit pref] [ 0.466558] pci_bus 0000:02: resource 0 [io 0x2000-0x2fff] [ 0.466675] pci_bus 0000:02: resource 1 [mem 0xc1a00000-0xc1afffff] [ 0.466803] pci_bus 0000:03: resource 1 [mem 0xc0000000-0xc0ffffff] [ 0.466923] pci_bus 0000:03: resource 4 [io 0x0000-0x0cf7 window] [ 0.467041] pci_bus 0000:03: resource 5 [io 0x0d00-0xffff window] [ 0.467160] pci_bus 0000:03: resource 6 [mem 0x000a0000-0x000bffff window] [ 0.467281] pci_bus 0000:03: resource 7 [mem 0x000d0000-0x000e7fff window] [ 0.467401] pci_bus 0000:03: resource 8 [mem 0xc0000000-0xfeafffff window] [ 0.467522] pci_bus 0000:03: resource 9 [mem 0xfed40000-0xfed44fff window] [ 0.467775] xen: registering gsi 22 triggering 0 polarity 1 [ 0.467800] xen: --> pirq=22 -> irq=22 (gsi=22) [ 0.489853] pci 0000:00:1a.0: quirk_usb_early_handoff+0x0/0x7c0 took 21628 usecs [ 0.490079] xen: registering gsi 20 triggering 0 polarity 1 [ 0.490102] xen: --> pirq=20 -> irq=20 (gsi=20) [ 0.511855] pci 0000:00:1d.0: quirk_usb_early_handoff+0x0/0x7c0 took 21310 usecs [ 0.512060] PCI: CLS 64 bytes, default 64 [ 0.512210] PCI-DMA: Using software bounce buffering for IO (SWIOTLB) [ 0.512329] software IO TLB: mapped [mem 0x000000001b180000-0x000000001f180000] (64MB) [ 0.512531] kvm_intel: VMX not supported by CPU 0 [ 0.512647] kvm_amd: CPU 0 isn't AMD or Hygon [ 0.512776] clocksource: tsc: mask: 0xffffffffffffffff max_cycles: 0x2c9556e1b50, max_idle_ns: 440795310707 ns [ 0.513136] clocksource: Switched to clocksource tsc [ 0.513256] Unpacking initramfs... [ 0.516782] Initialise system trusted keyrings [ 0.517038] workingset: timestamp_bits=62 max_order=17 bucket_order=0 [ 0.517338] NFS: Registering the id_resolver key type [ 0.517466] Key type id_resolver registered [ 0.517580] Key type id_legacy registered [ 0.517752] 9p: Installing v9fs 9p2000 file system support [ 0.530963] Key type asymmetric registered [ 0.531098] Asymmetric key parser 'x509' registered [ 0.531239] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 251) [ 0.531400] io scheduler mq-deadline registered [ 0.531515] io scheduler kyber registered [ 0.532087] xen: registering gsi 16 triggering 0 polarity 1 [ 0.532121] xen: --> pirq=16 -> irq=16 (gsi=16) [ 0.532351] pcieport 0000:00:1c.0: PME: Signaling with IRQ 50 [ 0.532731] xen: registering gsi 16 triggering 0 polarity 1 [ 0.532737] Already setup the GSI :16 [ 0.533069] pcieport 0000:00:1c.4: PME: Signaling with IRQ 51 [ 0.533504] input: Sleep Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0E:00/input/input0 [ 0.533704] ACPI: button: Sleep Button [SLPB] [ 0.533850] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input1 [ 0.534063] ACPI: button: Power Button [PWRF] [ 0.534546] Monitor-Mwait will be used to enter C-1 state [ 0.534561] Monitor-Mwait will be used to enter C-3 state [ 0.534569] ACPI: \_PR_.CPU0: Found 2 idle states [ 0.535192] ACPI: \_PR_.CPU1: Found 2 idle states [ 0.535575] ACPI: \_PR_.CPU2: Found 2 idle states [ 0.535961] ACPI: \_PR_.CPU3: Found 2 idle states [ 0.536615] thermal LNXTHERM:00: registered as thermal_zone0 [ 0.536737] ACPI: thermal: Thermal Zone [TZ00] (28 C) [ 0.537067] thermal LNXTHERM:01: registered as thermal_zone1 [ 0.537188] ACPI: thermal: Thermal Zone [TZ01] (30 C) [ 0.537620] xen:xen_evtchn: Event-channel device installed [ 0.537823] xen_pciback: backend is vpci [ 0.538658] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled [ 0.539533] hpet_acpi_add: no address or irqs in _CRS [ 0.539718] Non-volatile memory driver v1.3 [ 0.541401] loop: module loaded [ 0.546363] ahci 0000:00:1f.2: version 3.0 [ 0.546462] xen: registering gsi 21 triggering 0 polarity 1 [ 0.546497] xen: --> pirq=21 -> irq=21 (gsi=21) [ 0.556830] ahci 0000:00:1f.2: AHCI vers 0001.0300, 32 command slots, 3 Gbps, SATA mode [ 0.557011] ahci 0000:00:1f.2: 6/6 ports implemented (port mask 0x3f) [ 0.558775] ahci 0000:00:1f.2: flags: 64bit ncq sntf pm led clo pio slum part ems apst [ 0.574706] scsi host0: ahci [ 0.575249] scsi host1: ahci [ 0.575729] scsi host2: ahci [ 0.576131] scsi host3: ahci [ 0.576531] scsi host4: ahci [ 0.576866] scsi host5: ahci [ 0.577027] ata1: SATA max UDMA/133 abar m2048@0xc1b40000 port 0xc1b40100 irq 53 lpm-pol 0 [ 0.577178] ata2: SATA max UDMA/133 abar m2048@0xc1b40000 port 0xc1b40180 irq 53 lpm-pol 0 [ 0.577325] ata3: SATA max UDMA/133 abar m2048@0xc1b40000 port 0xc1b40200 irq 53 lpm-pol 0 [ 0.577472] ata4: SATA max UDMA/133 abar m2048@0xc1b40000 port 0xc1b40280 irq 53 lpm-pol 0 [ 0.577619] ata5: SATA max UDMA/133 abar m2048@0xc1b40000 port 0xc1b40300 irq 53 lpm-pol 0 [ 0.577765] ata6: SATA max UDMA/133 abar m2048@0xc1b40000 port 0xc1b40380 irq 53 lpm-pol 0 [ 0.578130] tun: Universal TUN/TAP device driver, 1.6 [ 0.578348] e100: Intel(R) PRO/100 Network Driver [ 0.578464] e100: Copyright(c) 1999-2006 Intel Corporation [ 0.578588] sky2: driver version 1.30 [ 0.578722] xen_netfront: Initialising Xen virtual ethernet driver [ 0.579002] usbcore: registered new interface driver usblp [ 0.579127] usbcore: registered new interface driver usb-storage [ 0.579163] xen: registering gsi 22 triggering 0 polarity 1 [ 0.579255] Already setup the GSI :22 [ 0.579278] i8042: PNP: No PS/2 controller found. [ 0.579453] ehci-pci 0000:00:1a.0: EHCI Host Controller [ 0.579669] ehci-pci 0000:00:1a.0: new USB bus registered, assigned bus number 1 [ 0.579697] rtc_cmos 00:01: RTC can wake from S4 [ 0.579731] xen: registering gsi 20 triggering 0 polarity 1 [ 0.579737] Already setup the GSI :20 [ 0.579853] ehci-pci 0000:00:1a.0: debug port 2 [ 0.580567] rtc_cmos 00:01: registered as rtc0 [ 0.580753] rtc_cmos 00:01: alarms up to one month, y3k, 242 bytes nvram [ 0.580946] device-mapper: uevent: version 1.0.3 [ 0.581240] xen: registering gsi 22 triggering 0 polarity 1 [ 0.581247] Already setup the GSI :22 [ 0.581465] i801_smbus 0000:00:1f.3: SMBus using PCI interrupt [ 0.582898] device-mapper: ioctl: 4.48.0-ioctl (2023-03-01) initialised: dm-devel@lists.linux.dev [ 0.583073] intel_pstate: CPU model not supported [ 0.583212] hid: raw HID events driver (C) Jiri Kosina [ 0.583448] usbcore: registered new interface driver usbhid [ 0.583579] usbhid: USB HID core driver [ 0.584036] Initializing XFRM netlink socket [ 0.584151] ehci-pci 0000:00:1a.0: irq 22, io mem 0xc1b60000 [ 0.584183] NET: Registered PF_INET6 protocol family [ 0.584742] Segment Routing with IPv6 [ 0.584848] i2c i2c-0: Successfully instantiated SPD at 0x51 [ 0.584869] In-situ OAM (IOAM) with IPv6 [ 0.585132] sit: IPv6, IPv4 and MPLS over IPv4 tunneling driver [ 0.585365] NET: Registered PF_PACKET protocol family [ 0.585506] 9pnet: Installing 9P2000 support [ 0.585637] Key type dns_resolver registered [ 0.586152] IPI shorthand broadcast: enabled [ 0.588461] sched_clock: Marking stable (560006196, 27878541)->(591197726, -3312989) [ 0.588952] Timer migration: 1 hierarchy levels; 8 children per group; 1 crossnode level [ 0.589476] registered taskstats version 1 [ 0.589590] Loading compiled-in X.509 certificates [ 0.590848] PM: Magic number: 12:808:367 [ 0.590905] ehci-pci 0000:00:1a.0: USB 2.0 started, EHCI 1.00 [ 0.591053] printk: legacy console [netcon0] enabled [ 0.591200] netconsole: network logging started [ 0.591234] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 6.10 [ 0.591463] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 0.591536] cfg80211: Loading compiled-in X.509 certificates for regulatory database [ 0.591608] usb usb1: Product: EHCI Host Controller [ 0.591869] usb usb1: Manufacturer: Linux 6.10.0-rc4+ ehci_hcd [ 0.592002] usb usb1: SerialNumber: 0000:00:1a.0 [ 0.592276] hub 1-0:1.0: USB hub found [ 0.592406] hub 1-0:1.0: 2 ports detected [ 0.592702] ehci-pci 0000:00:1d.0: EHCI Host Controller [ 0.592903] ehci-pci 0000:00:1d.0: new USB bus registered, assigned bus number 2 [ 0.593087] ehci-pci 0000:00:1d.0: debug port 2 [ 0.597223] ehci-pci 0000:00:1d.0: irq 20, io mem 0xc1b50000 [ 0.603908] ehci-pci 0000:00:1d.0: USB 2.0 started, EHCI 1.00 [ 0.604215] usb usb2: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 6.10 [ 0.604369] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 0.604537] usb usb2: Product: EHCI Host Controller [ 0.604652] usb usb2: Manufacturer: Linux 6.10.0-rc4+ ehci_hcd [ 0.604772] usb usb2: SerialNumber: 0000:00:1d.0 [ 0.605113] hub 2-0:1.0: USB hub found [ 0.605244] hub 2-0:1.0: 2 ports detected [ 0.610664] Freeing initrd memory: 20116K [ 0.622467] Loaded X.509 cert 'sforshee: 00b28ddf47aef9cea7' [ 0.622779] Loaded X.509 cert 'wens: 61c038651aabdcf94bd0ac7ff06c7248db18c600' [ 0.622958] ALSA device list: [ 0.623068] No soundcards found. [ 0.623688] cfg80211: loaded regulatory.db is malformed or signature is missing/invalid [ 0.827920] usb 1-1: new high-speed USB device number 2 using ehci-pci [ 0.843949] usb 2-1: new high-speed USB device number 2 using ehci-pci [ 0.888401] ata2: SATA link down (SStatus 0 SControl 300) [ 0.888553] ata6: SATA link down (SStatus 0 SControl 300) [ 0.888694] ata5: SATA link down (SStatus 0 SControl 300) [ 0.888836] ata4: SATA link down (SStatus 0 SControl 300) [ 0.889008] ata3: SATA link up 1.5 Gbps (SStatus 113 SControl 300) [ 0.889176] ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300) [ 0.891094] ata1.00: ATA-8: WDC WD1003FBYZ-010FB0, 01.01V03, max UDMA/133 [ 0.891629] ata1.00: 1953525168 sectors, multi 16: LBA48 NCQ (depth 32), AA [ 0.892858] ata3.00: ATAPI: Slimtype DVD A DS8ABSH, AP52, max UDMA/100 [ 0.894034] ata1.00: configured for UDMA/133 [ 0.894340] scsi 0:0:0:0: Direct-Access ATA WDC WD1003FBYZ-0 1V03 PQ: 0 ANSI: 5 [ 0.895256] sd 0:0:0:0: Attached scsi generic sg0 type 0 [ 0.895379] sd 0:0:0:0: [sda] 1953525168 512-byte logical blocks: (1.00 TB/932 GiB) [ 0.895569] sd 0:0:0:0: [sda] Write Protect is off [ 0.895689] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00 [ 0.895791] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 0.896126] sd 0:0:0:0: [sda] Preferred minimum I/O size 512 bytes [ 0.899261] ata3.00: configured for UDMA/100 [ 0.907496] scsi 2:0:0:0: CD-ROM Slimtype DVD A DS8ABSH AP52 PQ: 0 ANSI: 5 [ 0.927924] sda: sda1 sda2 < sda5 > [ 0.928418] sd 0:0:0:0: [sda] Attached SCSI disk [ 0.949319] sr 2:0:0:0: [sr0] scsi3-mmc drive: 24x/24x writer dvd-ram cd/rw xa/form2 cdda tray [ 0.949476] cdrom: Uniform CD-ROM driver Revision: 3.20 [ 0.956689] usb 1-1: New USB device found, idVendor=8087, idProduct=0024, bcdDevice= 0.00 [ 0.956842] usb 1-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0 [ 0.957351] hub 1-1:1.0: USB hub found [ 0.957639] hub 1-1:1.0: 6 ports detected [ 0.972873] sr 2:0:0:0: Attached scsi CD-ROM sr0 [ 0.973005] sr 2:0:0:0: Attached scsi generic sg1 type 5 [ 0.974216] usb 2-1: New USB device found, idVendor=8087, idProduct=0024, bcdDevice= 0.00 [ 0.974363] usb 2-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0 [ 0.974746] hub 2-1:1.0: USB hub found [ 0.974938] Freeing unused kernel image (initmem) memory: 2680K [ 0.974975] hub 2-1:1.0: 6 ports detected [ 0.975092] Write protecting the kernel read-only data: 24576k [ 0.997485] Freeing unused kernel image (rodata/data gap) memory: 2028K [ 1.166487] x86/mm: Checked W+X mappings: passed, no W+X pages found. [ 1.166613] Run /init as init process [ 1.166724] with arguments: [ 1.166725] /init [ 1.166726] placeholder [ 1.166726] with environment: [ 1.166727] HOME=/ [ 1.166728] TERM=linux [ 1.510367] e1000e: Intel(R) PRO/1000 Network Driver [ 1.510495] e1000e: Copyright(c) 1999 - 2015 Intel Corporation. [ 1.510717] xen: registering gsi 19 triggering 0 polarity 1 [ 1.510747] xen: --> pirq=19 -> irq=19 (gsi=19) [ 1.511182] e1000e 0000:00:19.0: Interrupt Throttling Rate (ints/sec) set to dynamic conservative mode [ 1.618529] e1000e 0000:00:19.0 0000:00:19.0 (uninitialized): registered PHC clock [ 1.716445] e1000e 0000:00:19.0 eth0: (PCI Express:2.5GT/s:Width x1) 00:1e:67:96:a5:3d [ 1.716600] e1000e 0000:00:19.0 eth0: Intel(R) PRO/1000 Network Connection [ 1.716769] e1000e 0000:00:19.0 eth0: MAC: 10, PHY: 11, PBA No: 0050FF-0FF [ 1.717024] xen: registering gsi 16 triggering 0 polarity 1 [ 1.717032] Already setup the GSI :16 [ 1.717473] e1000e 0000:02:00.0: Interrupt Throttling Rate (ints/sec) set to dynamic conservative mode [ 1.760908] e1000e 0000:02:00.0 0000:02:00.0 (uninitialized): registered PHC clock [ 1.807442] e1000e 0000:02:00.0 eth1: (PCI Express:2.5GT/s:Width x1) 00:1e:67:96:a5:3c [ 1.807596] e1000e 0000:02:00.0 eth1: Intel(R) PRO/1000 Network Connection [ 1.807802] e1000e 0000:02:00.0 eth1: MAC: 3, PHY: 8, PBA No: 1000FF-0FF [ 1.810082] e1000e 0000:00:19.0 enx001e6796a53d: renamed from eth0 [ 1.810565] e1000e 0000:02:00.0 enx001e6796a53c: renamed from eth1 [ 1.944908] random: crng init done [ 2.589529] EXT4-fs (dm-0): mounting ext3 file system using the ext4 subsystem [ 2.594360] EXT4-fs (dm-0): mounted filesystem 642f239b-00d6-4363-85e0-1be39d225f6a ro with ordered data mode. Quota mode: none. [ 5.936124] EXT4-fs (dm-0): re-mounted 642f239b-00d6-4363-85e0-1be39d225f6a r/w. Quota mode: none. [ 7.371399] EXT4-fs (sda1): mounting ext3 file system using the ext4 subsystem [ 7.385236] EXT4-fs (sda1): mounted filesystem 84d6800e-d31d-463a-bf69-d51cba63f4d4 r/w with ordered data mode. Quota mode: none. [ 7.469012] Adding 1949692k swap on /dev/mapper/italia1--vg-swap_1. Priority:-2 extents:1 across:1949692k [ 9.191978] xenbr0: port 1(enx001e6796a53c) entered blocking state [ 9.192126] xenbr0: port 1(enx001e6796a53c) entered disabled state [ 9.192255] e1000e 0000:02:00.0 enx001e6796a53c: entered allmulticast mode [ 9.192413] e1000e 0000:02:00.0 enx001e6796a53c: entered promiscuous mode [ 11.816037] e1000e 0000:02:00.0 enx001e6796a53c: NIC Link is Up 1000 Mbps Full Duplex, Flow Control: None [ 11.816662] xenbr0: port 1(enx001e6796a53c) entered blocking state [ 11.816785] xenbr0: port 1(enx001e6796a53c) entered forwarding state