[ 0.000000] Linux version 6.1.94+ (osstest@himrod1) (gcc (Debian 12.2.0-14) 12.2.0, GNU ld (GNU Binutils for Debian) 2.40) #1 SMP PREEMPT_DYNAMIC Tue Jun 18 21:23:00 UTC 2024 [ 0.000000] Command line: placeholder root=/dev/mapper/godello0--vg-root ro console=hvc0 [ 0.000000] Released 0 page(s) [ 0.000000] BIOS-provided physical RAM map: [ 0.000000] Xen: [mem 0x0000000000000000-0x000000000009efff] usable [ 0.000000] Xen: [mem 0x000000000009f000-0x00000000000fffff] reserved [ 0.000000] Xen: [mem 0x0000000000100000-0x0000000020060fff] usable [ 0.000000] Xen: [mem 0x000000009573f000-0x0000000095bbefff] reserved [ 0.000000] Xen: [mem 0x0000000095bbf000-0x0000000095fbefff] ACPI NVS [ 0.000000] Xen: [mem 0x0000000095fbf000-0x0000000095ffefff] ACPI data [ 0.000000] Xen: [mem 0x0000000096000000-0x000000009fffffff] reserved [ 0.000000] Xen: [mem 0x00000000f0000000-0x00000000f7ffffff] reserved [ 0.000000] Xen: [mem 0x00000000feb00000-0x00000000feb03fff] reserved [ 0.000000] Xen: [mem 0x00000000fec00000-0x00000000fec00fff] reserved [ 0.000000] Xen: [mem 0x00000000fed10000-0x00000000fed19fff] reserved [ 0.000000] Xen: [mem 0x00000000fed1c000-0x00000000fed1ffff] reserved [ 0.000000] Xen: [mem 0x00000000fed90000-0x00000000fed90fff] reserved [ 0.000000] Xen: [mem 0x00000000fee00000-0x00000000feefffff] reserved [ 0.000000] Xen: [mem 0x00000000ffa00000-0x00000000ffffffff] reserved [ 0.000000] NX (Execute Disable) protection: active [ 0.000000] SMBIOS 2.7 present. [ 0.000000] DMI: Dell Inc. PowerEdge R220/081N4V, BIOS 1.1.4 05/06/2014 [ 0.000000] Hypervisor detected: Xen PV [ 0.000468] tsc: Detected 3092.840 MHz processor [ 0.000790] e820: update [mem 0x00000000-0x00000fff] usable ==> reserved [ 0.000794] e820: remove [mem 0x000a0000-0x000fffff] usable [ 0.000799] last_pfn = 0x20061 max_arch_pfn = 0x400000000 [ 0.000801] Disabled [ 0.000802] x86/PAT: MTRRs disabled, skipping PAT initialization too. [ 0.000806] x86/PAT: Configuration [0-7]: WB WT UC- UC WC WP UC UC [ 0.000850] Kernel/User page tables isolation: disabled on XEN PV. [ 0.021071] RAMDISK: [mem 0x04000000-0x0536afff] [ 0.021086] ACPI: Early table checksum verification disabled [ 0.022678] ACPI: RSDP 0x00000000000FE020 000024 (v02 DELL ) [ 0.022692] ACPI: XSDT 0x0000000095FCF188 0000E4 (v01 DELL PE_SC3 00000001 01000013) [ 0.022752] ACPI: FACP 0x0000000095FF7000 00010C (v05 DELL PE_SC3 00000001 DELL 00040000) [ 0.022831] ACPI: DSDT 0x0000000095FDF000 012335 (v01 DELL PE_SC3 00000000 DELL 00040000) [ 0.022845] ACPI: FACS 0x0000000095FBD000 000040 [ 0.022860] ACPI: UEFI 0x0000000095FFD000 000236 (v01 DELL PE_SC3 00000001 DELL 00040000) [ 0.022875] ACPI: UEFI 0x0000000095FFC000 000042 (v01 DELL PE_SC3 00000000 DELL 00040000) [ 0.022890] ACPI: ASF! 0x0000000095FFB000 0000A5 (v32 DELL PE_SC3 00000001 DELL 00040000) [ 0.022904] ACPI: ASPT 0x0000000095FFA000 000034 (v07 DELL PE_SC3 00000001 DELL 00040000) [ 0.022918] ACPI: BOOT 0x0000000095FF9000 000028 (v01 DELL PE_SC3 00000001 DELL 00040000) [ 0.022931] ACPI: DBGP 0x0000000095FF8000 000034 (v01 DELL PE_SC3 00000001 DELL 00040000) [ 0.022946] ACPI: HPET 0x0000000095FF6000 000038 (v01 DELL PE_SC3 00000001 DELL 00040000) [ 0.022959] ACPI: APIC 0x0000000095FF5000 000092 (v03 DELL PE_SC3 00000001 DELL 00040000) [ 0.022973] ACPI: MCFG 0x0000000095FF4000 00003C (v01 DELL PE_SC3 00000001 DELL 00040000) [ 0.022987] ACPI: SLIC 0x0000000095FF3000 000176 (v01 DELL PE_SC3 00000001 DELL 00040000) [ 0.023000] ACPI: SSDT 0x0000000095FDC000 002028 (v01 DELL PE_SC3 00001000 DELL 00040000) [ 0.023015] ACPI: SPMI 0x0000000095FDA000 000040 (v05 DELL PE_SC3 00000001 DELL 00040000) [ 0.023029] ACPI: SSDT 0x0000000095FD9000 000533 (v01 DELL PE_SC3 00003000 DELL 00040000) [ 0.023042] ACPI: SSDT 0x0000000095FD8000 000ACE (v01 DELL PE_SC3 00003000 DELL 00040000) [ 0.023056] ACPI: SSDT 0x0000000095FD4000 003492 (v01 DELL PE_SC3 00003000 DELL 00040000) [ 0.023071] ACPI: SPCR 0x0000000095FF2000 000050 (v01 DELL PE_SC3 00000001 DELL 00040000) [ 0.023087] ACPI: RMAD 0x0000000095FD3000 000080 (v01 DELL PE_SC3 00000001 DELL 00040000) [ 0.023101] ACPI: SSDT 0x0000000095FD2000 000514 (v01 DELL PE_SC3 00001000 DELL 00040000) [ 0.023114] ACPI: FPDT 0x0000000095FD1000 000044 (v01 DELL PE_SC3 00000001 DELL 00040000) [ 0.023128] ACPI: HEST 0x0000000095FD0000 0000A8 (v01 DELL PE_SC3 00000001 DELL 00040000) [ 0.023143] ACPI: ERST 0x0000000095FCE000 000230 (v01 DELL PE_SC3 00000001 DELL 00040000) [ 0.023157] ACPI: BERT 0x0000000095FCD000 000030 (v01 DELL PE_SC3 00000001 DELL 00040000) [ 0.023171] ACPI: EINJ 0x0000000095FCC000 000150 (v01 DELL PE_SC3 00000001 DELL 00040000) [ 0.023178] ACPI: Reserving FACP table memory at [mem 0x95ff7000-0x95ff710b] [ 0.023179] ACPI: Reserving DSDT table memory at [mem 0x95fdf000-0x95ff1334] [ 0.023180] ACPI: Reserving FACS table memory at [mem 0x95fbd000-0x95fbd03f] [ 0.023181] ACPI: Reserving UEFI table memory at [mem 0x95ffd000-0x95ffd235] [ 0.023182] ACPI: Reserving UEFI table memory at [mem 0x95ffc000-0x95ffc041] [ 0.023183] ACPI: Reserving ASF! table memory at [mem 0x95ffb000-0x95ffb0a4] [ 0.023184] ACPI: Reserving ASPT table memory at [mem 0x95ffa000-0x95ffa033] [ 0.023185] ACPI: Reserving BOOT table memory at [mem 0x95ff9000-0x95ff9027] [ 0.023185] ACPI: Reserving DBGP table memory at [mem 0x95ff8000-0x95ff8033] [ 0.023186] ACPI: Reserving HPET table memory at [mem 0x95ff6000-0x95ff6037] [ 0.023187] ACPI: Reserving APIC table memory at [mem 0x95ff5000-0x95ff5091] [ 0.023188] ACPI: Reserving MCFG table memory at [mem 0x95ff4000-0x95ff403b] [ 0.023189] ACPI: Reserving SLIC table memory at [mem 0x95ff3000-0x95ff3175] [ 0.023190] ACPI: Reserving SSDT table memory at [mem 0x95fdc000-0x95fde027] [ 0.023190] ACPI: Reserving SPMI table memory at [mem 0x95fda000-0x95fda03f] [ 0.023191] ACPI: Reserving SSDT table memory at [mem 0x95fd9000-0x95fd9532] [ 0.023192] ACPI: Reserving SSDT table memory at [mem 0x95fd8000-0x95fd8acd] [ 0.023193] ACPI: Reserving SSDT table memory at [mem 0x95fd4000-0x95fd7491] [ 0.023193] ACPI: Reserving SPCR table memory at [mem 0x95ff2000-0x95ff204f] [ 0.023194] ACPI: Reserving RMAD table memory at [mem 0x95fd3000-0x95fd307f] [ 0.023195] ACPI: Reserving SSDT table memory at [mem 0x95fd2000-0x95fd2513] [ 0.023196] ACPI: Reserving FPDT table memory at [mem 0x95fd1000-0x95fd1043] [ 0.023197] ACPI: Reserving HEST table memory at [mem 0x95fd0000-0x95fd00a7] [ 0.023197] ACPI: Reserving ERST table memory at [mem 0x95fce000-0x95fce22f] [ 0.023198] ACPI: Reserving BERT table memory at [mem 0x95fcd000-0x95fcd02f] [ 0.023199] ACPI: Reserving EINJ table memory at [mem 0x95fcc000-0x95fcc14f] [ 0.023260] Setting APIC routing to Xen PV. [ 0.026225] Zone ranges: [ 0.026228] DMA [mem 0x0000000000001000-0x0000000000ffffff] [ 0.026230] DMA32 [mem 0x0000000001000000-0x0000000020060fff] [ 0.026232] Normal empty [ 0.026233] Movable zone start for each node [ 0.026234] Early memory node ranges [ 0.026234] node 0: [mem 0x0000000000001000-0x000000000009efff] [ 0.026237] node 0: [mem 0x0000000000100000-0x0000000020060fff] [ 0.026239] Initmem setup node 0 [mem 0x0000000000001000-0x0000000020060fff] [ 0.026248] On node 0, zone DMA: 1 pages in unavailable ranges [ 0.026328] On node 0, zone DMA: 97 pages in unavailable ranges [ 0.029668] On node 0, zone DMA32: 32671 pages in unavailable ranges [ 0.029673] p2m virtual area at (____ptrval____), size is 40000000 [ 0.165957] Remapped 97 page(s) [ 0.166512] ACPI: PM-Timer IO Port: 0x1808 [ 0.166570] ACPI: LAPIC_NMI (acpi_id[0xff] high edge lint[0x1]) [ 0.166594] IOAPIC[0]: apic_id 2, version 32, address 0xfec00000, GSI 0-23 [ 0.166603] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl) [ 0.166606] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level) [ 0.166632] ACPI: Using ACPI (MADT) for SMP configuration information [ 0.166637] ACPI: HPET id: 0x8086a201 base: 0xfed00000 [ 0.166648] ACPI: SPCR: SPCR table version 1 [ 0.166652] ACPI: SPCR: console: uart,io,0x3f8,115200 [ 0.166706] smpboot: Allowing 4 CPUs, 0 hotplug CPUs [ 0.166725] PM: hibernation: Registered nosave memory: [mem 0x00000000-0x00000fff] [ 0.166728] PM: hibernation: Registered nosave memory: [mem 0x0009f000-0x000fffff] [ 0.166731] [mem 0x20061000-0x9573efff] available for PCI devices [ 0.166736] Booting kernel on Xen [ 0.166737] Xen version: 4.19-unstable (preserve-AD) [ 0.166742] clocksource: refined-jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 1910969940391419 ns [ 0.172094] setup_percpu: NR_CPUS:64 nr_cpumask_bits:4 nr_cpu_ids:4 nr_node_ids:1 [ 0.172622] percpu: Embedded 54 pages/cpu s180520 r8192 d32472 u524288 [ 0.172629] pcpu-alloc: s180520 r8192 d32472 u524288 alloc=1*2097152 [ 0.172632] pcpu-alloc: [0] 0 1 2 3 [ 0.172722] xen: PV spinlocks enabled [ 0.172728] PV qspinlock hash table entries: 256 (order: 0, 4096 bytes, linear) [ 0.172735] Built 1 zonelists, mobility grouping on. Total pages: 129006 [ 0.172738] Kernel command line: placeholder root=/dev/mapper/godello0--vg-root ro console=hvc0 [ 0.172787] Unknown kernel command line parameters "placeholder", will be passed to user space. [ 0.172811] random: crng init done [ 0.172886] Dentry cache hash table entries: 65536 (order: 7, 524288 bytes, linear) [ 0.172929] Inode-cache hash table entries: 32768 (order: 6, 262144 bytes, linear) [ 0.173554] mem auto-init: stack:all(zero), heap alloc:off, heap free:off [ 0.173561] software IO TLB: area num 4. [ 0.248604] Memory: 390896K/524284K available (14349K kernel code, 2682K rwdata, 4576K rodata, 1576K init, 1296K bss, 133136K reserved, 0K cma-reserved) [ 0.248736] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1 [ 0.251067] Dynamic Preempt: voluntary [ 0.251139] rcu: Preemptible hierarchical RCU implementation. [ 0.251140] rcu: RCU event tracing is enabled. [ 0.251141] rcu: RCU restricting CPUs from NR_CPUS=64 to nr_cpu_ids=4. [ 0.251142] Trampoline variant of Tasks RCU enabled. [ 0.251144] rcu: RCU calculated value of scheduler-enlistment delay is 100 jiffies. [ 0.251145] rcu: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=4 [ 0.258796] NR_IRQS: 4352, nr_irqs: 456, preallocated irqs: 16 [ 0.258907] xen:events: Using FIFO-based ABI [ 0.258935] xen: --> pirq=1 -> irq=1 (gsi=1) [ 0.258941] xen: --> pirq=2 -> irq=2 (gsi=2) [ 0.258947] xen: --> pirq=3 -> irq=3 (gsi=3) [ 0.258952] xen: --> pirq=4 -> irq=4 (gsi=4) [ 0.258958] xen: --> pirq=5 -> irq=5 (gsi=5) [ 0.258967] xen: --> pirq=6 -> irq=6 (gsi=6) [ 0.258973] xen: --> pirq=7 -> irq=7 (gsi=7) [ 0.258978] xen: --> pirq=8 -> irq=8 (gsi=8) [ 0.258983] xen: --> pirq=9 -> irq=9 (gsi=9) [ 0.258988] xen: --> pirq=10 -> irq=10 (gsi=10) [ 0.258994] xen: --> pirq=11 -> irq=11 (gsi=11) [ 0.258999] xen: --> pirq=12 -> irq=12 (gsi=12) [ 0.259005] xen: --> pirq=13 -> irq=13 (gsi=13) [ 0.259010] xen: --> pirq=14 -> irq=14 (gsi=14) [ 0.259015] xen: --> pirq=15 -> irq=15 (gsi=15) [ 0.259027] rcu: srcu_init: Setting srcu_struct sizes based on contention. [ 0.268290] Console: colour VGA+ 80x25 [ 0.287509] printk: console [tty0] enabled [ 0.288548] printk: console [hvc0] enabled [ 0.288703] ACPI: Core revision 20220331 [ 0.308281] clocksource: xen: mask: 0xffffffffffffffff max_cycles: 0x1cd42e4dffb, max_idle_ns: 881590591483 ns [ 0.308488] Xen: using vcpuop timer interface [ 0.308498] installing Xen timer for CPU 0 [ 0.308683] clocksource: tsc-early: mask: 0xffffffffffffffff max_cycles: 0x2c94dc1ce7d, max_idle_ns: 440795323863 ns [ 0.308873] Calibrating delay loop (skipped), value calculated using timer frequency.. 6185.68 BogoMIPS (lpj=3092840) [ 0.309205] Last level iTLB entries: 4KB 1024, 2MB 1024, 4MB 1024 [ 0.309349] Last level dTLB entries: 4KB 1024, 2MB 1024, 4MB 1024, 1GB 4 [ 0.309497] Spectre V1 : Mitigation: usercopy/swapgs barriers and __user pointer sanitization [ 0.309882] Spectre V2 : Mitigation: Retpolines [ 0.310017] Spectre V2 : Spectre v2 / SpectreRSB mitigation: Filling RSB on context switch [ 0.310191] Spectre V2 : Spectre v2 / SpectreRSB : Filling RSB on VMEXIT [ 0.310336] Spectre V2 : Enabling Restricted Speculation for firmware calls [ 0.310483] Spectre V2 : mitigation: Enabling conditional Indirect Branch Prediction Barrier [ 0.310657] Spectre V2 : User space: Mitigation: STIBP via prctl [ 0.310794] Speculative Store Bypass: Mitigation: Speculative Store Bypass disabled via prctl [ 0.310877] MDS: Mitigation: Clear CPU buffers [ 0.311018] MMIO Stale Data: Unknown: No mitigations [ 0.311256] SRBDS: Unknown: Dependent on hypervisor status [ 0.311416] x86/fpu: Supporting XSAVE feature 0x001: 'x87 floating point registers' [ 0.311590] x86/fpu: Supporting XSAVE feature 0x002: 'SSE registers' [ 0.311732] x86/fpu: Supporting XSAVE feature 0x004: 'AVX registers' [ 0.311874] x86/fpu: xstate_offset[2]: 576, xstate_sizes[2]: 256 [ 0.312019] x86/fpu: Enabled xstate features 0x7, context size is 832 bytes, using 'standard' format. [ 0.329503] Freeing SMP alternatives memory: 40K [ 0.329673] pid_max: default: 32768 minimum: 301 [ 0.329844] LSM: Security Framework initializing [ 0.329882] SELinux: Initializing. [ 0.330059] Mount-cache hash table entries: 1024 (order: 1, 8192 bytes, linear) [ 0.330235] Mountpoint-cache hash table entries: 1024 (order: 1, 8192 bytes, linear) [ 0.330961] cpu 0 spinlock event irq 25 [ 0.331107] VPMU disabled by hypervisor. [ 0.331503] cblist_init_generic: Setting adjustable number of callback queues. [ 0.331689] cblist_init_generic: Setting shift to 2 and lim to 1. [ 0.331863] Performance Events: unsupported p6 CPU model 60 no PMU driver, software events only. [ 0.332046] signal: max sigframe size: 1776 [ 0.332226] rcu: Hierarchical SRCU implementation. [ 0.332365] rcu: Max phase no-delay instances is 400. [ 0.332845] smp: Bringing up secondary CPUs ... [ 0.333044] installing Xen timer for CPU 1 [ 0.333471] cpu 1 spinlock event irq 35 [ 0.333985] MDS CPU bug present and SMT on, data leak possible. See https://www.kernel.org/doc/html/latest/admin-guide/hw-vuln/mds.html for more details. [ 0.334348] installing Xen timer for CPU 2 [ 0.335036] cpu 2 spinlock event irq 41 [ 0.335043] installing Xen timer for CPU 3 [ 0.335874] cpu 3 spinlock event irq 47 [ 0.335995] smp: Brought up 1 node, 4 CPUs [ 0.336135] smpboot: Max logical packages: 1 [ 0.336391] devtmpfs: initialized [ 0.336933] x86/mm: Memory block size: 128MB [ 0.337237] ACPI: PM: Registering ACPI NVS region [mem 0x95bbf000-0x95fbefff] (4194304 bytes) [ 0.337237] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 1911260446275000 ns [ 0.337350] futex hash table entries: 1024 (order: 4, 65536 bytes, linear) [ 0.337996] PM: RTC time: 15:38:03, date: 2024-06-19 [ 0.338234] NET: Registered PF_NETLINK/PF_ROUTE protocol family [ 0.338412] xen:grant_table: Grant tables using version 1 layout [ 0.338570] Grant table initialized [ 0.338809] audit: initializing netlink subsys (disabled) [ 0.338896] audit: type=2000 audit(1718811483.833:1): state=initialized audit_enabled=0 res=1 [ 0.338927] thermal_sys: Registered thermal governor 'step_wise' [ 0.338927] thermal_sys: Registered thermal governor 'user_space' [ 0.339088] Simple Boot Flag at 0x44 set to 0x1 [ 0.339386] ACPI FADT declares the system doesn't support PCIe ASPM, so disable it [ 0.339956] PCI: MMCONFIG for domain 0000 [bus 00-7f] at [mem 0xf0000000-0xf7ffffff] (base 0xf0000000) [ 0.340147] PCI: MMCONFIG at [mem 0xf0000000-0xf7ffffff] reserved in E820 [ 0.385907] PCI: Using configuration type 1 for base access [ 0.386231] PCI: Dell System detected, enabling pci=bfsort. [ 0.388449] kprobes: kprobe jump-optimization is enabled. All kprobes are optimized if possible. [ 0.388969] ACPI: Added _OSI(Module Device) [ 0.389054] ACPI: Added _OSI(Processor Device) [ 0.389192] ACPI: Added _OSI(3.0 _SCP Extensions) [ 0.389329] ACPI: Added _OSI(Processor Aggregator Device) [ 0.405429] ACPI: 6 ACPI AML tables successfully acquired and loaded [ 0.406296] xen: registering gsi 9 triggering 0 polarity 0 [ 0.406798] ACPI: [Firmware Bug]: BIOS _OSI(Linux) query ignored [ 0.408895] ACPI: Dynamic OEM Table Load: [ 0.409049] ACPI: SSDT 0xFFFF88800358AC00 0003D3 (v01 PmRef Cpu0Cst 00003001 INTL 20120816) [ 0.410051] ACPI: Dynamic OEM Table Load: [ 0.410202] ACPI: SSDT 0xFFFF888003C58000 0005AA (v01 PmRef ApIst 00003000 INTL 20120816) [ 0.411256] ACPI: Dynamic OEM Table Load: [ 0.411431] ACPI: SSDT 0xFFFF8880036C4200 000119 (v01 PmRef ApCst 00003000 INTL 20120816) [ 0.413485] ACPI: Interpreter enabled [ 0.413653] ACPI: PM: (supports S0 S4 S5) [ 0.413790] ACPI: Using IOAPIC for interrupt routing [ 0.413920] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug [ 0.414099] PCI: Using E820 reservations for host bridge windows [ 0.414503] ACPI: Enabled 11 GPEs in block 00 to 3F [ 0.420408] acpi ABCD0000:00: ACPI dock station (docks/bays count: 1) [ 0.428222] ACPI: PM: Power Resource [FN00] [ 0.428394] ACPI: PM: Power Resource [FN01] [ 0.428566] ACPI: PM: Power Resource [FN02] [ 0.428736] ACPI: PM: Power Resource [FN03] [ 0.428909] ACPI: PM: Power Resource [FN04] [ 0.429747] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-7e]) [ 0.429878] acpi PNP0A08:00: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI HPX-Type3] [ 0.430847] acpi PNP0A08:00: _OSC: OS now controls [PME PCIeCapability LTR] [ 0.430874] acpi PNP0A08:00: FADT indicates ASPM is unsupported, using BIOS configuration [ 0.431527] PCI host bridge to bus 0000:00 [ 0.431667] pci_bus 0000:00: root bus resource [io 0x0000-0x0cf7 window] [ 0.431826] pci_bus 0000:00: root bus resource [io 0x0d00-0xffff window] [ 0.431874] pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff window] [ 0.432047] pci_bus 0000:00: root bus resource [mem 0xa0000000-0xfeafffff window] [ 0.432219] pci_bus 0000:00: root bus resource [bus 00-7e] [ 0.432389] pci 0000:00:00.0: [8086:0c08] type 00 class 0x060000 [ 0.432941] pci 0000:00:14.0: [8086:8c31] type 00 class 0x0c0330 [ 0.433162] pci 0000:00:14.0: reg 0x10: [mem 0xa2b00000-0xa2b0ffff 64bit] [ 0.433568] pci 0000:00:14.0: PME# supported from D3hot D3cold [ 0.433944] pci 0000:00:1a.0: [8086:8c2d] type 00 class 0x0c0320 [ 0.434144] pci 0000:00:1a.0: reg 0x10: [mem 0xa2b12000-0xa2b123ff] [ 0.434603] pci 0000:00:1a.0: PME# supported from D0 D3hot D3cold [ 0.434925] pci 0000:00:1c.0: [8086:8c10] type 01 class 0x060400 [ 0.435410] pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold [ 0.435631] pci 0000:00:1c.0: Enabling MPC IRBNCE [ 0.435774] pci 0000:00:1c.0: Intel PCH root port ACS workaround enabled [ 0.436215] pci 0000:00:1c.2: [8086:8c14] type 01 class 0x060400 [ 0.436706] pci 0000:00:1c.2: PME# supported from D0 D3hot D3cold [ 0.436928] pci 0000:00:1c.2: Enabling MPC IRBNCE [ 0.437071] pci 0000:00:1c.2: Intel PCH root port ACS workaround enabled [ 0.437571] pci 0000:00:1d.0: [8086:8c26] type 00 class 0x0c0320 [ 0.437773] pci 0000:00:1d.0: reg 0x10: [mem 0xa2b11000-0xa2b113ff] [ 0.438188] pci 0000:00:1d.0: PME# supported from D0 D3hot D3cold [ 0.438508] pci 0000:00:1f.0: [8086:8c52] type 00 class 0x060100 [ 0.439158] pci 0000:00:1f.2: [8086:8c02] type 00 class 0x010601 [ 0.439364] pci 0000:00:1f.2: reg 0x10: [io 0x3048-0x304f] [ 0.439534] pci 0000:00:1f.2: reg 0x14: [io 0x3054-0x3057] [ 0.439702] pci 0000:00:1f.2: reg 0x18: [io 0x3040-0x3047] [ 0.439869] pci 0000:00:1f.2: reg 0x1c: [io 0x3050-0x3053] [ 0.440033] pci 0000:00:1f.2: reg 0x20: [io 0x3020-0x303f] [ 0.440203] pci 0000:00:1f.2: reg 0x24: [mem 0xa2b10000-0xa2b107ff] [ 0.440513] pci 0000:00:1f.2: PME# supported from D3hot [ 0.440802] pci 0000:00:1f.3: [8086:8c22] type 00 class 0x0c0500 [ 0.440951] pci 0000:00:1f.3: reg 0x10: [mem 0xa2b13000-0xa2b130ff 64bit] [ 0.441182] pci 0000:00:1f.3: reg 0x20: [io 0x3000-0x301f] [ 0.441742] pci 0000:01:00.0: [14e4:165f] type 00 class 0x020000 [ 0.442035] pci 0000:01:00.0: reg 0x10: [mem 0xa2a30000-0xa2a3ffff 64bit pref] [ 0.442324] pci 0000:01:00.0: reg 0x18: [mem 0xa2a40000-0xa2a4ffff 64bit pref] [ 0.442606] pci 0000:01:00.0: reg 0x20: [mem 0xa2a50000-0xa2a5ffff 64bit pref] [ 0.442869] pci 0000:01:00.0: reg 0x30: [mem 0x00000000-0x0003ffff pref] [ 0.443464] pci 0000:01:00.0: PME# supported from D0 D3hot D3cold [ 0.444193] pci 0000:01:00.1: [14e4:165f] type 00 class 0x020000 [ 0.444492] pci 0000:01:00.1: reg 0x10: [mem 0xa2a00000-0xa2a0ffff 64bit pref] [ 0.444773] pci 0000:01:00.1: reg 0x18: [mem 0xa2a10000-0xa2a1ffff 64bit pref] [ 0.444993] pci 0000:01:00.1: reg 0x20: [mem 0xa2a20000-0xa2a2ffff 64bit pref] [ 0.445259] pci 0000:01:00.1: reg 0x30: [mem 0x00000000-0x0003ffff pref] [ 0.445806] pci 0000:01:00.1: PME# supported from D0 D3hot D3cold [ 0.446514] pci 0000:00:1c.0: PCI bridge to [bus 01] [ 0.446692] pci 0000:00:1c.0: bridge window [mem 0xa2a00000-0xa2afffff 64bit pref] [ 0.447401] pci 0000:02:00.0: [1912:0013] type 01 class 0x060400 [ 0.450519] pci 0000:02:00.0: PME# supported from D0 D3hot D3cold [ 0.452104] pci 0000:00:1c.2: PCI bridge to [bus 02-06] [ 0.452260] pci 0000:00:1c.2: bridge window [mem 0xa2000000-0xa29fffff] [ 0.452422] pci 0000:00:1c.2: bridge window [mem 0xa1000000-0xa1ffffff 64bit pref] [ 0.453874] pci 0000:03:00.0: [1912:0013] type 01 class 0x060400 [ 0.457345] pci 0000:03:00.0: PME# supported from D0 D3hot D3cold [ 0.459207] pci 0000:03:01.0: [1912:0013] type 01 class 0x060400 [ 0.462868] pci 0000:03:01.0: PME# supported from D0 D3hot D3cold [ 0.466536] pci 0000:02:00.0: PCI bridge to [bus 03-06] [ 0.466874] pci 0000:02:00.0: bridge window [mem 0xa2000000-0xa29fffff] [ 0.467153] pci 0000:02:00.0: bridge window [mem 0xa1000000-0xa1ffffff 64bit pref] [ 0.468653] pci 0000:04:00.0: [1912:0012] type 01 class 0x060400 [ 0.473399] pci 0000:03:00.0: PCI bridge to [bus 04-05] [ 0.473757] pci 0000:03:00.0: bridge window [mem 0xa2000000-0xa28fffff] [ 0.474026] pci 0000:03:00.0: bridge window [mem 0xa1000000-0xa1ffffff 64bit pref] [ 0.475241] pci_bus 0000:05: extended config space not accessible [ 0.475617] pci 0000:05:00.0: [102b:0534] type 00 class 0x030000 [ 0.476258] pci 0000:05:00.0: reg 0x10: [mem 0xa1000000-0xa1ffffff pref] [ 0.488138] pci 0000:05:00.0: reg 0x14: [mem 0xa2800000-0xa2803fff] [ 0.488544] pci 0000:05:00.0: reg 0x18: [mem 0xa2000000-0xa27fffff] [ 0.490023] pci 0000:05:00.0: Video device with shadowed ROM at [mem 0x000c0000-0x000dffff] [ 0.493540] pci 0000:04:00.0: PCI bridge to [bus 05] [ 0.493873] pci 0000:04:00.0: bridge window [mem 0xa2000000-0xa28fffff] [ 0.494163] pci 0000:04:00.0: bridge window [mem 0xa1000000-0xa1ffffff 64bit pref] [ 0.495920] pci 0000:06:00.0: [1912:0011] type 00 class 0x050000 [ 0.496559] pci 0000:06:00.0: reg 0x10: [mem 0xa2901000-0xa2901fff] [ 0.496954] pci 0000:06:00.0: reg 0x14: [mem 0xa2900000-0xa290007f] [ 0.499374] pci 0000:06:00.0: PME# supported from D3hot [ 0.500326] pci 0000:03:01.0: PCI bridge to [bus 06] [ 0.500682] pci 0000:03:01.0: bridge window [mem 0xa2900000-0xa29fffff] [ 0.501926] pci_bus 0000:00: on NUMA node 0 [ 0.502122] xen: registering gsi 13 triggering 1 polarity 0 [ 0.503132] ACPI: PCI: Interrupt link LNKA configured for IRQ 10 [ 0.503347] ACPI: PCI: Interrupt link LNKB configured for IRQ 11 [ 0.503564] ACPI: PCI: Interrupt link LNKC configured for IRQ 10 [ 0.503781] ACPI: PCI: Interrupt link LNKD configured for IRQ 10 [ 0.503948] ACPI: PCI: Interrupt link LNKE configured for IRQ 0 [ 0.504090] ACPI: PCI: Interrupt link LNKE disabled [ 0.504300] ACPI: PCI: Interrupt link LNKF configured for IRQ 0 [ 0.504442] ACPI: PCI: Interrupt link LNKF disabled [ 0.504641] ACPI: PCI: Interrupt link LNKG configured for IRQ 0 [ 0.504784] ACPI: PCI: Interrupt link LNKG disabled [ 0.504947] ACPI: PCI: Interrupt link LNKH configured for IRQ 11 [ 0.506713] xen:balloon: Initialising balloon driver [ 0.506924] iommu: Default domain type: Translated [ 0.507065] iommu: DMA domain TLB invalidation policy: lazy mode [ 0.507257] SCSI subsystem initialized [ 0.507891] libata version 3.00 loaded. [ 0.507902] ACPI: bus type USB registered [ 0.508050] usbcore: registered new interface driver usbfs [ 0.508196] usbcore: registered new interface driver hub [ 0.508196] usbcore: registered new device driver usb [ 0.508196] pps_core: LinuxPPS API ver. 1 registered [ 0.508196] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti [ 0.508371] PTP clock support registered [ 0.508904] Advanced Linux Sound Architecture Driver Initialized. [ 0.509145] NetLabel: Initializing [ 0.509145] NetLabel: domain hash size = 128 [ 0.509145] NetLabel: protocols = UNLABELED CIPSOv4 CALIPSO [ 0.509166] NetLabel: unlabeled traffic allowed by default [ 0.509897] PCI: Using ACPI for IRQ routing [ 0.526473] PCI: pci_cache_line_size set to 64 bytes [ 0.527115] e820: reserve RAM buffer [mem 0x0009f000-0x0009ffff] [ 0.527118] e820: reserve RAM buffer [mem 0x20061000-0x23ffffff] [ 0.527136] pci 0000:05:00.0: vgaarb: setting as boot VGA device [ 0.527178] pci 0000:05:00.0: vgaarb: bridge control possible [ 0.527314] pci 0000:05:00.0: vgaarb: VGA device added: decodes=io+mem,owns=io+mem,locks=none [ 0.527492] vgaarb: loaded [ 0.529030] clocksource: Switched to clocksource tsc-early [ 0.529231] VFS: Disk quotas dquot_6.6.0 [ 0.529377] VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes) [ 0.529537] hugetlbfs: disabling because there are no supported hugepage sizes [ 0.529734] pnp: PnP ACPI init [ 0.529838] system 00:00: [io 0x0680-0x069f] has been reserved [ 0.529987] system 00:00: [io 0xffff] has been reserved [ 0.530129] system 00:00: [io 0xffff] has been reserved [ 0.530269] system 00:00: [io 0xffff] has been reserved [ 0.530410] system 00:00: [io 0x1800-0x18fe] has been reserved [ 0.530548] system 00:00: [io 0x164e-0x164f] has been reserved [ 0.530723] system 00:01: [io 0x0800-0x087f] has been reserved [ 0.530904] xen: registering gsi 8 triggering 1 polarity 0 [ 0.530961] system 00:03: [io 0x1854-0x1857] has been reserved [ 0.531400] xen: registering gsi 3 triggering 1 polarity 0 [ 0.531660] xen: registering gsi 4 triggering 1 polarity 0 [ 0.531662] Already setup the GSI :4 [ 0.531981] system 00:06: [mem 0xfed1c000-0xfed1ffff] has been reserved [ 0.532129] system 00:06: [mem 0xfed10000-0xfed17fff] has been reserved [ 0.532271] system 00:06: [mem 0xfed18000-0xfed18fff] has been reserved [ 0.532417] system 00:06: [mem 0xfed19000-0xfed19fff] has been reserved [ 0.532563] system 00:06: [mem 0xf0000000-0xf7ffffff] has been reserved [ 0.532708] system 00:06: [mem 0xfed20000-0xfed3ffff] has been reserved [ 0.532851] system 00:06: [mem 0xfed90000-0xfed93fff] could not be reserved [ 0.533003] system 00:06: [mem 0xff000000-0xffffffff] could not be reserved [ 0.533145] system 00:06: [mem 0xfee00000-0xfeefffff] has been reserved [ 0.533290] system 00:06: [mem 0xa0000000-0xa0000fff] has been reserved [ 0.533434] system 00:06: [mem 0xa0020000-0xa002ffff] has been reserved [ 0.534412] pnp: PnP ACPI: found 7 devices [ 0.555982] PM-Timer failed consistency check (0xffffff) - aborting. [ 0.556175] NET: Registered PF_INET protocol family [ 0.556344] IP idents hash table entries: 8192 (order: 4, 65536 bytes, linear) [ 0.556671] tcp_listen_portaddr_hash hash table entries: 256 (order: 0, 4096 bytes, linear) [ 0.556859] Table-perturb hash table entries: 65536 (order: 6, 262144 bytes, linear) [ 0.557053] TCP established hash table entries: 4096 (order: 3, 32768 bytes, linear) [ 0.557247] TCP bind hash table entries: 4096 (order: 5, 131072 bytes, linear) [ 0.557441] TCP: Hash tables configured (established 4096 bind 4096) [ 0.557597] UDP hash table entries: 256 (order: 1, 8192 bytes, linear) [ 0.557743] UDP-Lite hash table entries: 256 (order: 1, 8192 bytes, linear) [ 0.557913] NET: Registered PF_UNIX/PF_LOCAL protocol family [ 0.558230] RPC: Registered named UNIX socket transport module. [ 0.558376] RPC: Registered udp transport module. [ 0.558509] RPC: Registered tcp transport module. [ 0.558642] RPC: Registered tcp NFSv4.1 backchannel transport module. [ 0.559041] clipped [mem size 0x00020000] to [mem size 0xfffffffffffc0000] for e820 entry [mem 0x0009f000-0x000fffff] [ 0.559229] pci 0000:00:1c.0: BAR 14: assigned [mem 0xa0100000-0xa01fffff] [ 0.559376] pci 0000:01:00.0: BAR 6: assigned [mem 0xa0100000-0xa013ffff pref] [ 0.559548] pci 0000:01:00.1: BAR 6: assigned [mem 0xa0140000-0xa017ffff pref] [ 0.559720] pci 0000:00:1c.0: PCI bridge to [bus 01] [ 0.559879] pci 0000:00:1c.0: bridge window [mem 0xa0100000-0xa01fffff] [ 0.560029] pci 0000:00:1c.0: bridge window [mem 0xa2a00000-0xa2afffff 64bit pref] [ 0.560220] pci 0000:04:00.0: PCI bridge to [bus 05] [ 0.560510] pci 0000:04:00.0: bridge window [mem 0xa2000000-0xa28fffff] [ 0.560769] pci 0000:04:00.0: bridge window [mem 0xa1000000-0xa1ffffff 64bit pref] [ 0.561149] pci 0000:03:00.0: PCI bridge to [bus 04-05] [ 0.561431] pci 0000:03:00.0: bridge window [mem 0xa2000000-0xa28fffff] [ 0.561663] pci 0000:03:00.0: bridge window [mem 0xa1000000-0xa1ffffff 64bit pref] [ 0.562037] pci 0000:03:01.0: PCI bridge to [bus 06] [ 0.562344] pci 0000:03:01.0: bridge window [mem 0xa2900000-0xa29fffff] [ 0.562832] pci 0000:02:00.0: PCI bridge to [bus 03-06] [ 0.563112] pci 0000:02:00.0: bridge window [mem 0xa2000000-0xa29fffff] [ 0.563345] pci 0000:02:00.0: bridge window [mem 0xa1000000-0xa1ffffff 64bit pref] [ 0.563758] pci 0000:00:1c.2: PCI bridge to [bus 02-06] [ 0.563934] pci 0000:00:1c.2: bridge window [mem 0xa2000000-0xa29fffff] [ 0.564091] pci 0000:00:1c.2: bridge window [mem 0xa1000000-0xa1ffffff 64bit pref] [ 0.564280] pci_bus 0000:00: resource 4 [io 0x0000-0x0cf7 window] [ 0.564418] pci_bus 0000:00: resource 5 [io 0x0d00-0xffff window] [ 0.564561] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff window] [ 0.564707] pci_bus 0000:00: resource 7 [mem 0xa0000000-0xfeafffff window] [ 0.564850] pci_bus 0000:01: resource 1 [mem 0xa0100000-0xa01fffff] [ 0.564993] pci_bus 0000:01: resource 2 [mem 0xa2a00000-0xa2afffff 64bit pref] [ 0.565170] pci_bus 0000:02: resource 1 [mem 0xa2000000-0xa29fffff] [ 0.565314] pci_bus 0000:02: resource 2 [mem 0xa1000000-0xa1ffffff 64bit pref] [ 0.565487] pci_bus 0000:03: resource 1 [mem 0xa2000000-0xa29fffff] [ 0.565631] pci_bus 0000:03: resource 2 [mem 0xa1000000-0xa1ffffff 64bit pref] [ 0.565797] pci_bus 0000:04: resource 1 [mem 0xa2000000-0xa28fffff] [ 0.565944] pci_bus 0000:04: resource 2 [mem 0xa1000000-0xa1ffffff 64bit pref] [ 0.566118] pci_bus 0000:05: resource 1 [mem 0xa2000000-0xa28fffff] [ 0.566261] pci_bus 0000:05: resource 2 [mem 0xa1000000-0xa1ffffff 64bit pref] [ 0.566433] pci_bus 0000:06: resource 1 [mem 0xa2900000-0xa29fffff] [ 0.566699] xen: registering gsi 16 triggering 0 polarity 1 [ 0.566718] xen: --> pirq=16 -> irq=16 (gsi=16) [ 0.568147] xen: registering gsi 16 triggering 0 polarity 1 [ 0.568150] Already setup the GSI :16 [ 0.581000] pci 0000:00:1a.0: quirk_usb_early_handoff+0x0/0x720 took 12601 usecs [ 0.581242] xen: registering gsi 23 triggering 0 polarity 1 [ 0.581255] xen: --> pirq=23 -> irq=23 (gsi=23) [ 0.593994] pci 0000:00:1d.0: quirk_usb_early_handoff+0x0/0x720 took 12502 usecs [ 0.594475] PCI: CLS 64 bytes, default 64 [ 0.594618] PCI-DMA: Using software bounce buffering for IO (SWIOTLB) [ 0.594671] Unpacking initramfs... [ 0.594772] software IO TLB: mapped [mem 0x000000001b180000-0x000000001f180000] (64MB) [ 0.595163] kvm: no hardware support for 'kvm_intel' [ 0.595305] has_svm: not amd or hygon [ 0.595440] kvm: no hardware support for 'kvm_amd' [ 0.595581] clocksource: tsc: mask: 0xffffffffffffffff max_cycles: 0x2c94dc1ce7d, max_idle_ns: 440795323863 ns [ 0.595801] clocksource: Switched to clocksource tsc [ 0.601606] Initialise system trusted keyrings [ 0.601808] workingset: timestamp_bits=62 max_order=17 bucket_order=0 [ 0.602919] NFS: Registering the id_resolver key type [ 0.603064] Key type id_resolver registered [ 0.603200] Key type id_legacy registered [ 0.603375] 9p: Installing v9fs 9p2000 file system support [ 0.613440] Key type asymmetric registered [ 0.613580] Asymmetric key parser 'x509' registered [ 0.613728] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 251) [ 0.613912] io scheduler mq-deadline registered [ 0.614050] io scheduler kyber registered [ 0.614530] xen: registering gsi 16 triggering 0 polarity 1 [ 0.614536] Already setup the GSI :16 [ 0.614937] pcieport 0000:00:1c.0: PME: Signaling with IRQ 50 [ 0.615315] xen: registering gsi 18 triggering 0 polarity 1 [ 0.615333] xen: --> pirq=18 -> irq=18 (gsi=18) [ 0.615493] pcieport 0000:00:1c.2: PME: Signaling with IRQ 51 [ 0.620000] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input0 [ 0.620242] ACPI: button: Power Button [PWRF] [ 0.620778] Monitor-Mwait will be used to enter C-1 state [ 0.620811] Monitor-Mwait will be used to enter C-2 state [ 0.620822] ACPI: \_PR_.CPU0: Found 2 idle states [ 0.621165] ACPI: \_PR_.CPU1: Found 2 idle states [ 0.633159] ACPI: \_PR_.CPU2: Found 2 idle states [ 0.633706] ACPI: \_PR_.CPU3: Found 2 idle states [ 0.634278] thermal LNXTHERM:00: registered as thermal_zone0 [ 0.634426] ACPI: thermal: Thermal Zone [TZ00] (28 C) [ 0.634782] thermal LNXTHERM:01: registered as thermal_zone1 [ 0.634974] ACPI: thermal: Thermal Zone [TZ01] (30 C) [ 0.635368] xen:xen_evtchn: Event-channel device installed [ 0.635564] xen_pciback: backend is vpci [ 0.636169] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled [ 0.636408] 00:04: ttyS1 at I/O 0x2f8 (irq = 3, base_baud = 115200) is a 16550A [ 0.637050] hpet_acpi_add: no address or irqs in _CRS [ 0.637242] Non-volatile memory driver v1.3 [ 0.637382] AMD-Vi: AMD IOMMUv2 functionality not available on this system - This is not a bug. [ 0.638810] loop: module loaded [ 0.642385] ahci 0000:00:1f.2: version 3.0 [ 0.642482] xen: registering gsi 19 triggering 0 polarity 1 [ 0.642502] xen: --> pirq=19 -> irq=19 (gsi=19) [ 0.642660] ahci 0000:00:1f.2: SSS flag set, parallel bus scan disabled [ 0.642849] ahci 0000:00:1f.2: AHCI 0001.0300 32 slots 6 ports 6 Gbps 0x31 impl SATA mode [ 0.643029] ahci 0000:00:1f.2: flags: 64bit ncq stag pm led clo pio slum part ems sxs apst [ 0.649264] scsi host0: ahci [ 0.649611] scsi host1: ahci [ 0.649874] scsi host2: ahci [ 0.650145] scsi host3: ahci [ 0.650401] scsi host4: ahci [ 0.650659] scsi host5: ahci [ 0.650825] ata1: SATA max UDMA/133 abar m2048@0xa2b10000 port 0xa2b10100 irq 53 [ 0.651010] ata2: DUMMY [ 0.651140] ata3: DUMMY [ 0.651270] ata4: DUMMY [ 0.651397] ata5: SATA max UDMA/133 abar m2048@0xa2b10000 port 0xa2b10300 irq 53 [ 0.651569] ata6: SATA max UDMA/133 abar m2048@0xa2b10000 port 0xa2b10380 irq 53 [ 0.651911] tun: Universal TUN/TAP device driver, 1.6 [ 0.652226] xen: registering gsi 16 triggering 0 polarity 1 [ 0.652232] Already setup the GSI :16 [ 0.666279] Freeing initrd memory: 19884K [ 0.686153] tg3 0000:01:00.0 eth0: Tigon3 [partno(BCM95720) rev 5720000] (PCI Express) MAC address 54:9f:35:05:fd:58 [ 0.686347] tg3 0000:01:00.0 eth0: attached PHY is 5720C (10/100/1000Base-T Ethernet) (WireSpeed[1], EEE[1]) [ 0.686527] tg3 0000:01:00.0 eth0: RXcsums[1] LinkChgREG[0] MIirq[0] ASF[1] TSOcap[1] [ 0.686702] tg3 0000:01:00.0 eth0: dma_rwctrl[00000001] dma_mask[64-bit] [ 0.687266] xen: registering gsi 17 triggering 0 polarity 1 [ 0.687289] xen: --> pirq=17 -> irq=17 (gsi=17) [ 0.737605] tg3 0000:01:00.1 eth1: Tigon3 [partno(BCM95720) rev 5720000] (PCI Express) MAC address 54:9f:35:05:fd:5a [ 0.737791] tg3 0000:01:00.1 eth1: attached PHY is 5720C (10/100/1000Base-T Ethernet) (WireSpeed[1], EEE[1]) [ 0.737980] tg3 0000:01:00.1 eth1: RXcsums[1] LinkChgREG[0] MIirq[0] ASF[1] TSOcap[1] [ 0.738153] tg3 0000:01:00.1 eth1: dma_rwctrl[00000001] dma_mask[64-bit] [ 0.738588] e100: Intel(R) PRO/100 Network Driver [ 0.738727] e100: Copyright(c) 1999-2006 Intel Corporation [ 0.738890] sky2: driver version 1.30 [ 0.739051] xen_netfront: Initialising Xen virtual ethernet driver [ 0.739370] xen: registering gsi 16 triggering 0 polarity 1 [ 0.739374] Already setup the GSI :16 [ 0.739560] ehci-pci 0000:00:1a.0: EHCI Host Controller [ 0.739779] ehci-pci 0000:00:1a.0: new USB bus registered, assigned bus number 1 [ 0.739993] ehci-pci 0000:00:1a.0: debug port 2 [ 0.744144] ehci-pci 0000:00:1a.0: irq 16, io mem 0xa2b12000 [ 0.750863] ehci-pci 0000:00:1a.0: USB 2.0 started, EHCI 1.00 [ 0.751073] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 6.01 [ 0.751243] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 0.751415] usb usb1: Product: EHCI Host Controller [ 0.751552] usb usb1: Manufacturer: Linux 6.1.94+ ehci_hcd [ 0.751694] usb usb1: SerialNumber: 0000:00:1a.0 [ 0.752020] hub 1-0:1.0: USB hub found [ 0.752170] hub 1-0:1.0: 2 ports detected [ 0.752511] xen: registering gsi 23 triggering 0 polarity 1 [ 0.752515] Already setup the GSI :23 [ 0.752699] ehci-pci 0000:00:1d.0: EHCI Host Controller [ 0.752925] ehci-pci 0000:00:1d.0: new USB bus registered, assigned bus number 2 [ 0.753132] ehci-pci 0000:00:1d.0: debug port 2 [ 0.757293] ehci-pci 0000:00:1d.0: irq 23, io mem 0xa2b11000 [ 0.763898] ehci-pci 0000:00:1d.0: USB 2.0 started, EHCI 1.00 [ 0.764104] usb usb2: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 6.01 [ 0.764278] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 0.764451] usb usb2: Product: EHCI Host Controller [ 0.764589] usb usb2: Manufacturer: Linux 6.1.94+ ehci_hcd [ 0.764730] usb usb2: SerialNumber: 0000:00:1d.0 [ 0.765045] hub 2-0:1.0: USB hub found [ 0.765193] hub 2-0:1.0: 2 ports detected [ 0.765568] xen: registering gsi 16 triggering 0 polarity 1 [ 0.765572] Already setup the GSI :16 [ 0.765766] xhci_hcd 0000:00:14.0: xHCI Host Controller [ 0.766018] xhci_hcd 0000:00:14.0: new USB bus registered, assigned bus number 3 [ 0.767265] xhci_hcd 0000:00:14.0: hcc params 0x200077c1 hci version 0x100 quirks 0x0000000000009810 [ 0.767710] xhci_hcd 0000:00:14.0: xHCI Host Controller [ 0.767952] xhci_hcd 0000:00:14.0: new USB bus registered, assigned bus number 4 [ 0.768128] xhci_hcd 0000:00:14.0: Host supports USB 3.0 SuperSpeed [ 0.768333] usb usb3: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 6.01 [ 0.768509] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 0.768685] usb usb3: Product: xHCI Host Controller [ 0.768819] usb usb3: Manufacturer: Linux 6.1.94+ xhci-hcd [ 0.768969] usb usb3: SerialNumber: 0000:00:14.0 [ 0.769244] hub 3-0:1.0: USB hub found [ 0.769398] hub 3-0:1.0: 10 ports detected [ 0.772618] usb usb4: New USB device found, idVendor=1d6b, idProduct=0003, bcdDevice= 6.01 [ 0.772797] usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 0.772981] usb usb4: Product: xHCI Host Controller [ 0.773120] usb usb4: Manufacturer: Linux 6.1.94+ xhci-hcd [ 0.773260] usb usb4: SerialNumber: 0000:00:14.0 [ 0.773562] hub 4-0:1.0: USB hub found [ 0.773715] hub 4-0:1.0: 2 ports detected [ 0.774263] usbcore: registered new interface driver usblp [ 0.774421] usbcore: registered new interface driver usb-storage [ 0.774586] i8042: PNP: No PS/2 controller found. [ 0.774837] rtc_cmos 00:02: RTC can wake from S4 [ 0.775446] rtc_cmos 00:02: registered as rtc0 [ 0.775629] rtc_cmos 00:02: alarms up to one month, 242 bytes nvram [ 0.775812] device-mapper: uevent: version 1.0.3 [ 0.775890] xen: registering gsi 18 triggering 0 polarity 1 [ 0.775956] Already setup the GSI :18 [ 0.776049] device-mapper: ioctl: 4.47.0-ioctl (2022-07-28) initialised: dm-devel@redhat.com [ 0.776202] i801_smbus 0000:00:1f.3: SMBus using PCI interrupt [ 0.776267] intel_pstate: CPU model not supported [ 0.776561] hid: raw HID events driver (C) Jiri Kosina [ 0.776791] usbcore: registered new interface driver usbhid [ 0.776943] usbhid: USB HID core driver [ 0.777346] Initializing XFRM netlink socket [ 0.777575] NET: Registered PF_INET6 protocol family [ 0.778073] Segment Routing with IPv6 [ 0.778215] In-situ OAM (IOAM) with IPv6 [ 0.778373] sit: IPv6, IPv4 and MPLS over IPv4 tunneling driver [ 0.778589] NET: Registered PF_PACKET protocol family [ 0.778759] 9pnet: Installing 9P2000 support [ 0.778916] Key type dns_resolver registered [ 0.779266] IPI shorthand broadcast: enabled [ 0.779424] sched_clock: Marking stable (729394048, 49839648)->(786448920, -7215224) [ 0.779860] registered taskstats version 1 [ 0.780013] Loading compiled-in X.509 certificates [ 0.780970] i2c i2c-0: 1/4 memory slots populated (from DMI) [ 0.781633] i2c i2c-0: Successfully instantiated SPD at 0x51 [ 0.781749] PM: Magic number: 12:599:639 [ 0.781987] printk: console [netcon0] enabled [ 0.782126] netconsole: network logging started [ 0.782451] cfg80211: Loading compiled-in X.509 certificates for regulatory database [ 0.790533] cfg80211: Loaded X.509 cert 'sforshee: 00b28ddf47aef9cea7' [ 0.790839] cfg80211: Loaded X.509 cert 'wens: 61c038651aabdcf94bd0ac7ff06c7248db18c600' [ 0.791401] cfg80211: loaded regulatory.db is malformed or signature is missing/invalid [ 0.791599] ALSA device list: [ 0.791757] No soundcards found. [ 0.963164] ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300) [ 0.990899] usb 1-1: new high-speed USB device number 2 using ehci-pci [ 1.006898] usb 2-1: new high-speed USB device number 2 using ehci-pci [ 1.014898] usb 3-9: new high-speed USB device number 2 using xhci_hcd [ 1.015589] ata1.00: ATA-8: TOSHIBA MG03ACA100, FL1D, max UDMA/100 [ 1.016350] ata1.00: 1953525168 sectors, multi 16: LBA48 NCQ (depth 32), AA [ 1.017500] ata1.00: configured for UDMA/100 [ 1.017884] scsi 0:0:0:0: Direct-Access ATA TOSHIBA MG03ACA1 FL1D PQ: 0 ANSI: 5 [ 1.018609] sd 0:0:0:0: Attached scsi generic sg0 type 0 [ 1.018658] sd 0:0:0:0: [sda] 1953525168 512-byte logical blocks: (1.00 TB/932 GiB) [ 1.018944] sd 0:0:0:0: [sda] Write Protect is off [ 1.019086] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00 [ 1.019129] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 1.019356] sd 0:0:0:0: [sda] Preferred minimum I/O size 512 bytes [ 1.119549] usb 1-1: New USB device found, idVendor=8087, idProduct=8008, bcdDevice= 0.05 [ 1.119726] usb 1-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0 [ 1.120198] hub 1-1:1.0: USB hub found [ 1.120552] hub 1-1:1.0: 4 ports detected [ 1.144784] usb 3-9: New USB device found, idVendor=0624, idProduct=0248, bcdDevice= 0.00 [ 1.144968] usb 3-9: New USB device strings: Mfr=1, Product=2, SerialNumber=3 [ 1.145112] usb 3-9: Product: Gadget USB HUB [ 1.145249] usb 3-9: Manufacturer: no manufacturer [ 1.145385] usb 3-9: SerialNumber: 0123456789 [ 1.146229] usb 2-1: New USB device found, idVendor=8087, idProduct=8000, bcdDevice= 0.05 [ 1.146401] usb 2-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0 [ 1.146676] hub 3-9:1.0: USB hub found [ 1.146934] hub 3-9:1.0: 6 ports detected [ 1.147099] hub 2-1:1.0: USB hub found [ 1.147378] hub 2-1:1.0: 6 ports detected [ 1.206503] sda: sda1 sda2 < sda5 > [ 1.206973] sd 0:0:0:0: [sda] Attached SCSI disk [ 1.331100] ata5: SATA link up 1.5 Gbps (SStatus 113 SControl 300) [ 1.333947] ata5.00: ATAPI: HL-DT-ST DVD+/-RW GTA0N, A3B0, max UDMA/100 [ 1.338701] ata5.00: configured for UDMA/100 [ 1.343830] scsi 4:0:0:0: CD-ROM HL-DT-ST DVD+-RW GTA0N A3B0 PQ: 0 ANSI: 5 [ 1.384451] sr 4:0:0:0: [sr0] scsi3-mmc drive: 24x/24x writer dvd-ram cd/rw xa/form2 cdda tray [ 1.384632] cdrom: Uniform CD-ROM driver Revision: 3.20 [ 1.404291] sr 4:0:0:0: Attached scsi CD-ROM sr0 [ 1.404365] sr 4:0:0:0: Attached scsi generic sg1 type 5 [ 1.438896] usb 3-9.1: new high-speed USB device number 3 using xhci_hcd [ 1.526104] usb 3-9.1: New USB device found, idVendor=0624, idProduct=0249, bcdDevice= 0.00 [ 1.526287] usb 3-9.1: New USB device strings: Mfr=4, Product=5, SerialNumber=6 [ 1.526460] usb 3-9.1: Product: Keyboard/Mouse Function [ 1.526596] usb 3-9.1: Manufacturer: Avocent [ 1.526733] usb 3-9.1: SerialNumber: 20120917 [ 1.533538] input: Avocent Keyboard/Mouse Function as /devices/pci0000:00/0000:00:14.0/usb3/3-9/3-9.1/3-9.1:1.0/0003:0624:0249.0001/input/input1 [ 1.585067] hid-generic 0003:0624:0249.0001: input,hidraw0: USB HID v1.00 Keyboard [Avocent Keyboard/Mouse Function] on usb-0000:00:14.0-9.1/input0 [ 1.586208] input: Avocent Keyboard/Mouse Function as /devices/pci0000:00/0000:00:14.0/usb3/3-9/3-9.1/3-9.1:1.1/0003:0624:0249.0002/input/input2 [ 1.586538] hid-generic 0003:0624:0249.0002: input,hidraw1: USB HID v1.00 Mouse [Avocent Keyboard/Mouse Function] on usb-0000:00:14.0-9.1/input1 [ 1.587441] input: Avocent Keyboard/Mouse Function as /devices/pci0000:00/0000:00:14.0/usb3/3-9/3-9.1/3-9.1:1.2/0003:0624:0249.0003/input/input3 [ 1.587731] hid-generic 0003:0624:0249.0003: input,hidraw2: USB HID v1.00 Mouse [Avocent Keyboard/Mouse Function] on usb-0000:00:14.0-9.1/input2 [ 1.715180] ata6: SATA link down (SStatus 0 SControl 300) [ 1.716114] Freeing unused kernel image (initmem) memory: 1576K [ 1.716263] Write protecting the kernel read-only data: 22528k [ 1.728857] Freeing unused kernel image (text/rodata gap) memory: 2032K [ 1.729772] Freeing unused kernel image (rodata/data gap) memory: 1568K [ 1.923561] x86/mm: Checked W+X mappings: passed, no W+X pages found. [ 1.923749] Run /init as init process [ 1.923907] with arguments: [ 1.923908] /init [ 1.923909] placeholder [ 1.923910] with environment: [ 1.923910] HOME=/ [ 1.923911] TERM=linux [ 2.159025] tg3 0000:01:00.0 enx549f3505fd58: renamed from eth0 [ 2.165264] tg3 0000:01:00.1 enx549f3505fd5a: renamed from eth1 [ 2.788506] EXT4-fs (dm-0): mounting ext3 file system using the ext4 subsystem [ 2.793033] EXT4-fs (dm-0): mounted filesystem with ordered data mode. Quota mode: none. [ 6.372337] EXT4-fs (dm-0): re-mounted. Quota mode: none. [ 7.506946] EXT4-fs (sda1): mounting ext3 file system using the ext4 subsystem [ 7.514343] EXT4-fs (sda1): mounted filesystem with ordered data mode. Quota mode: none. [ 7.571743] Adding 1949692k swap on /dev/mapper/godello0--vg-swap_1. Priority:-2 extents:1 across:1949692k [ 9.039187] xenbr0: port 1(enx549f3505fd58) entered blocking state [ 9.039373] xenbr0: port 1(enx549f3505fd58) entered disabled state [ 9.039556] device enx549f3505fd58 entered promiscuous mode [ 12.618879] tg3 0000:01:00.0 enx549f3505fd58: Link is up at 1000 Mbps, full duplex [ 12.619129] tg3 0000:01:00.0 enx549f3505fd58: Flow control is off for TX and off for RX [ 12.619306] tg3 0000:01:00.0 enx549f3505fd58: EEE is disabled [ 12.619529] IPv6: ADDRCONF(NETDEV_CHANGE): enx549f3505fd58: link becomes ready [ 12.619725] xenbr0: port 1(enx549f3505fd58) entered blocking state [ 12.619886] xenbr0: port 1(enx549f3505fd58) entered forwarding state [ 12.620049] IPv6: ADDRCONF(NETDEV_CHANGE): xenbr0: link becomes ready