[ 0.000000] Linux version 6.10.0-rc4+ (osstest@himrod2) (gcc (Debian 12.2.0-14) 12.2.0, GNU ld (GNU Binutils for Debian) 2.40) #1 SMP PREEMPT_DYNAMIC Wed Jun 19 18:09:56 UTC 2024 [ 0.000000] Command line: placeholder root=/dev/mapper/pinot1--vg-root ro console=hvc0 [ 0.000000] [Firmware Bug]: TSC doesn't count with P0 frequency! [ 0.000000] Released 0 page(s) [ 0.000000] BIOS-provided physical RAM map: [ 0.000000] Xen: [mem 0x0000000000000000-0x0000000000099fff] usable [ 0.000000] Xen: [mem 0x000000000009a800-0x00000000000fffff] reserved [ 0.000000] Xen: [mem 0x0000000000100000-0x0000000020065fff] usable [ 0.000000] Xen: [mem 0x00000000dfe9e000-0x00000000dfe9ffff] type 9 [ 0.000000] Xen: [mem 0x00000000dfea0000-0x00000000dfeb1fff] ACPI data [ 0.000000] Xen: [mem 0x00000000dfeb2000-0x00000000dfedffff] ACPI NVS [ 0.000000] Xen: [mem 0x00000000dfee0000-0x00000000efffffff] reserved [ 0.000000] Xen: [mem 0x00000000f6000000-0x00000000f6003fff] reserved [ 0.000000] Xen: [mem 0x00000000fec00000-0x00000000fec00fff] reserved [ 0.000000] Xen: [mem 0x00000000fec20000-0x00000000fec20fff] reserved [ 0.000000] Xen: [mem 0x00000000fee00000-0x00000000feefffff] reserved [ 0.000000] Xen: [mem 0x00000000ffe00000-0x00000000ffffffff] reserved [ 0.000000] Xen: [mem 0x000000fd00000000-0x000000ffffffffff] reserved [ 0.000000] NX (Execute Disable) protection: active [ 0.000000] APIC: Static calls initialized [ 0.000000] SMBIOS 2.6 present. [ 0.000000] DMI: Supermicro H8SML/H8SML, BIOS 3.5 11/25/2013 [ 0.000000] DMI: Memory slots populated: 2/4 [ 0.000000] Hypervisor detected: Xen PV [ 0.000011] Xen PV: Detected 4 vCPUS [ 0.038871] tsc: Fast TSC calibration using PIT [ 0.038872] tsc: Detected 2799.946 MHz processor [ 0.038874] tsc: Detected 2800.012 MHz TSC [ 0.039123] e820: update [mem 0x00000000-0x00000fff] usable ==> reserved [ 0.039127] e820: remove [mem 0x000a0000-0x000fffff] usable [ 0.039134] last_pfn = 0x20066 max_arch_pfn = 0x400000000 [ 0.039137] MTRR map: 1 entries (0 fixed + 1 variable; max 16), built from 8 variable MTRRs [ 0.039139] MTRRs set to read-only [ 0.039142] x86/PAT: Configuration [0-7]: WB WT UC- UC WC WP UC UC [ 0.064965] RAMDISK: [mem 0x04000000-0x053b7fff] [ 0.064977] ACPI: Early table checksum verification disabled [ 0.065729] ACPI: RSDP 0x00000000000FA1C0 000024 (v02 ACPIAM) [ 0.065738] ACPI: XSDT 0x00000000DFEA0100 00007C (v01 SMCI 20131125 MSFT 00000097) [ 0.065764] ACPI: FACP 0x00000000DFEA0290 0000F4 (v03 112513 FACP1100 20131125 MSFT 00000097) [ 0.065796] ACPI BIOS Warning (bug): 32/64X length mismatch in FADT/Gpe0Block: 64/32 (20240322/tbfadt-560) [ 0.065807] ACPI: DSDT 0x00000000DFEA0600 00562B (v01 1CF11 1CF11000 00000000 INTL 20051117) [ 0.065818] ACPI: FACS 0x00000000DFEB2000 000040 [ 0.065827] ACPI: FACS 0x00000000DFEB2000 000040 [ 0.065837] ACPI: APIC 0x00000000DFEA0390 0000A4 (v01 112513 APIC1100 20131125 MSFT 00000097) [ 0.065848] ACPI: MCFG 0x00000000DFEA0440 00003C (v01 112513 OEMMCFG 20131125 MSFT 00000097) [ 0.065858] ACPI: OEMB 0x00000000DFEB2040 000075 (v01 112513 OEMB1100 20131125 MSFT 00000097) [ 0.065869] ACPI: HPET 0x00000000DFEAA600 000038 (v01 112513 OEMHPET 20131125 MSFT 00000097) [ 0.065879] ACPI: IVRS 0x00000000DFEAA640 0000B0 (v01 AMD RD890S 00202031 AMD 00000000) [ 0.065889] ACPI: SSDT 0x00000000DFEAA6F0 000B9C (v01 A M I POWERNOW 00000001 AMD 00000001) [ 0.065899] ACPI: EINJ 0x00000000DFEAB290 000130 (v01 AMIER AMI_EINJ 20131125 MSFT 00000097) [ 0.065910] ACPI: BERT 0x00000000DFEAB420 000030 (v01 AMIER AMI_BERT 20131125 MSFT 00000097) [ 0.065920] ACPI: ERST 0x00000000DFEAB450 000210 (v01 AMIER AMI_ERST 20131125 MSFT 00000097) [ 0.065930] ACPI: HEST 0x00000000DFEAB660 0000A8 (v01 AMIER ABC_HEST 20131125 MSFT 00000097) [ 0.065936] ACPI: Reserving FACP table memory at [mem 0xdfea0290-0xdfea0383] [ 0.065938] ACPI: Reserving DSDT table memory at [mem 0xdfea0600-0xdfea5c2a] [ 0.065939] ACPI: Reserving FACS table memory at [mem 0xdfeb2000-0xdfeb203f] [ 0.065940] ACPI: Reserving FACS table memory at [mem 0xdfeb2000-0xdfeb203f] [ 0.065942] ACPI: Reserving APIC table memory at [mem 0xdfea0390-0xdfea0433] [ 0.065943] ACPI: Reserving MCFG table memory at [mem 0xdfea0440-0xdfea047b] [ 0.065944] ACPI: Reserving OEMB table memory at [mem 0xdfeb2040-0xdfeb20b4] [ 0.065945] ACPI: Reserving HPET table memory at [mem 0xdfeaa600-0xdfeaa637] [ 0.065947] ACPI: Reserving IVRS table memory at [mem 0xdfeaa640-0xdfeaa6ef] [ 0.065948] ACPI: Reserving SSDT table memory at [mem 0xdfeaa6f0-0xdfeab28b] [ 0.065949] ACPI: Reserving EINJ table memory at [mem 0xdfeab290-0xdfeab3bf] [ 0.065950] ACPI: Reserving BERT table memory at [mem 0xdfeab420-0xdfeab44f] [ 0.065951] ACPI: Reserving ERST table memory at [mem 0xdfeab450-0xdfeab65f] [ 0.065953] ACPI: Reserving HEST table memory at [mem 0xdfeab660-0xdfeab707] [ 0.066042] APIC: Switched APIC routing to: Xen PV [ 0.068413] Zone ranges: [ 0.068414] DMA [mem 0x0000000000001000-0x0000000000ffffff] [ 0.068416] DMA32 [mem 0x0000000001000000-0x0000000020065fff] [ 0.068419] Normal empty [ 0.068420] Movable zone start for each node [ 0.068421] Early memory node ranges [ 0.068421] node 0: [mem 0x0000000000001000-0x0000000000099fff] [ 0.068424] node 0: [mem 0x0000000000100000-0x0000000020065fff] [ 0.068426] Initmem setup node 0 [mem 0x0000000000001000-0x0000000020065fff] [ 0.068433] On node 0, zone DMA: 1 pages in unavailable ranges [ 0.068492] On node 0, zone DMA: 102 pages in unavailable ranges [ 0.070794] On node 0, zone DMA32: 32666 pages in unavailable ranges [ 0.070799] p2m virtual area at (____ptrval____), size is 40000000 [ 0.290880] Remapped 102 page(s) [ 0.291426] ACPI: PM-Timer IO Port: 0x808 [ 0.291451] CPU topo: CPU limit of 4 reached. Ignoring further CPUs [ 0.291475] ACPI: LAPIC_NMI (acpi_id[0xff] dfl dfl lint[0x1]) [ 0.291479] ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1]) [ 0.291499] IOAPIC[0]: apic_id 0, version 33, address 0xfec00000, GSI 0-23 [ 0.291507] IOAPIC[1]: apic_id 1, version 33, address 0xfec20000, GSI 24-55 [ 0.291517] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl) [ 0.291520] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 low level) [ 0.291539] ACPI: Using ACPI (MADT) for SMP configuration information [ 0.291543] ACPI: HPET id: 0x8300 base: 0xfed00000 [ 0.291554] CPU topo: Max. logical packages: 1 [ 0.291555] CPU topo: Max. logical dies: 1 [ 0.291556] CPU topo: Max. dies per package: 1 [ 0.291561] CPU topo: Max. threads per core: 1 [ 0.291563] CPU topo: Num. cores per package: 4 [ 0.291564] CPU topo: Num. threads per package: 4 [ 0.291564] CPU topo: Allowing 4 present CPUs plus 0 hotplug CPUs [ 0.291565] CPU topo: Rejected CPUs 4 [ 0.291581] PM: hibernation: Registered nosave memory: [mem 0x00000000-0x00000fff] [ 0.291583] PM: hibernation: Registered nosave memory: [mem 0x0009a000-0x0009afff] [ 0.291585] PM: hibernation: Registered nosave memory: [mem 0x0009b000-0x000fffff] [ 0.291587] [mem 0x20066000-0xdfe9dfff] available for PCI devices [ 0.291597] Booting kernel on Xen [ 0.291598] Xen version: 4.19-unstable (preserve-AD) [ 0.291601] clocksource: refined-jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 1910969940391419 ns [ 0.297876] setup_percpu: NR_CPUS:64 nr_cpumask_bits:4 nr_cpu_ids:4 nr_node_ids:1 [ 0.298450] percpu: Embedded 57 pages/cpu s194408 r8192 d30872 u524288 [ 0.298458] pcpu-alloc: s194408 r8192 d30872 u524288 alloc=1*2097152 [ 0.298461] pcpu-alloc: [0] 0 1 2 3 [ 0.298513] xen: PV spinlocks enabled [ 0.298517] PV qspinlock hash table entries: 256 (order: 0, 4096 bytes, linear) [ 0.298520] Kernel command line: placeholder root=/dev/mapper/pinot1--vg-root ro console=hvc0 [ 0.298575] Unknown kernel command line parameters "placeholder", will be passed to user space. [ 0.298699] Dentry cache hash table entries: 65536 (order: 7, 524288 bytes, linear) [ 0.298759] Inode-cache hash table entries: 32768 (order: 6, 262144 bytes, linear) [ 0.298946] Built 1 zonelists, mobility grouping on. Total pages: 131071 [ 0.298950] mem auto-init: stack:all(zero), heap alloc:off, heap free:off [ 0.298952] software IO TLB: area num 4. [ 0.368797] Memory: 386444K/524284K available (16384K kernel code, 2753K rwdata, 6164K rodata, 2680K init, 1864K bss, 137588K reserved, 0K cma-reserved) [ 0.368903] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1 [ 0.371459] Dynamic Preempt: voluntary [ 0.371559] rcu: Preemptible hierarchical RCU implementation. [ 0.371560] rcu: RCU event tracing is enabled. [ 0.371561] rcu: RCU restricting CPUs from NR_CPUS=64 to nr_cpu_ids=4. [ 0.371563] Trampoline variant of Tasks RCU enabled. [ 0.371564] rcu: RCU calculated value of scheduler-enlistment delay is 100 jiffies. [ 0.371565] rcu: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=4 [ 0.371582] RCU Tasks: Setting shift to 2 and lim to 1 rcu_task_cb_adjust=1. [ 0.378365] NR_IRQS: 4352, nr_irqs: 1000, preallocated irqs: 16 [ 0.378491] xen:events: Using FIFO-based ABI [ 0.378521] xen: --> pirq=1 -> irq=1 (gsi=1) [ 0.378528] xen: --> pirq=2 -> irq=2 (gsi=2) [ 0.378533] xen: --> pirq=3 -> irq=3 (gsi=3) [ 0.378542] xen: --> pirq=4 -> irq=4 (gsi=4) [ 0.378548] xen: --> pirq=5 -> irq=5 (gsi=5) [ 0.378554] xen: --> pirq=6 -> irq=6 (gsi=6) [ 0.378560] xen: --> pirq=7 -> irq=7 (gsi=7) [ 0.378565] xen: --> pirq=8 -> irq=8 (gsi=8) [ 0.378571] xen: --> pirq=9 -> irq=9 (gsi=9) [ 0.378576] xen: --> pirq=10 -> irq=10 (gsi=10) [ 0.378582] xen: --> pirq=11 -> irq=11 (gsi=11) [ 0.378588] xen: --> pirq=12 -> irq=12 (gsi=12) [ 0.378593] xen: --> pirq=13 -> irq=13 (gsi=13) [ 0.378599] xen: --> pirq=14 -> irq=14 (gsi=14) [ 0.378604] xen: --> pirq=15 -> irq=15 (gsi=15) [ 0.378613] rcu: srcu_init: Setting srcu_struct sizes based on contention. [ 0.384642] Console: colour VGA+ 80x25 [ 0.384646] printk: legacy console [tty0] enabled [ 0.398297] printk: legacy console [hvc0] enabled [ 0.399001] ACPI: Core revision 20240322 [ 0.403003] clocksource: xen: mask: 0xffffffffffffffff max_cycles: 0x1cd42e4dffb, max_idle_ns: 881590591483 ns [ 0.403161] Xen: using vcpuop timer interface [ 0.403166] installing Xen timer for CPU 0 [ 0.403419] clocksource: tsc-early: mask: 0xffffffffffffffff max_cycles: 0x285c4c04d54, max_idle_ns: 440795212551 ns [ 0.403579] Calibrating delay loop (skipped), value calculated using timer frequency.. 5600.02 BogoMIPS (lpj=2800012) [ 0.403772] [Firmware Bug]: CPU 0: APIC ID mismatch. CPUID: 0x0000 APIC: 0x0010 [ 0.403996] Last level iTLB entries: 4KB 512, 2MB 1024, 4MB 512 [ 0.404131] Last level dTLB entries: 4KB 1024, 2MB 1024, 4MB 512, 1GB 0 [ 0.404247] Spectre V1 : Mitigation: usercopy/swapgs barriers and __user pointer sanitization [ 0.404589] Spectre V2 : Mitigation: Retpolines [ 0.404693] Spectre V2 : Spectre v2 / SpectreRSB mitigation: Filling RSB on context switch [ 0.404838] Spectre V2 : Spectre v2 / SpectreRSB : Filling RSB on VMEXIT [ 0.404949] Spectre V2 : Enabling Speculation Barrier for firmware calls [ 0.405060] RETBleed: Mitigation: untrained return thunk [ 0.405167] Spectre V2 : mitigation: Enabling conditional Indirect Branch Prediction Barrier [ 0.405313] Speculative Store Bypass: Vulnerable [ 0.405437] x86/fpu: Supporting XSAVE feature 0x001: 'x87 floating point registers' [ 0.405582] x86/fpu: Supporting XSAVE feature 0x002: 'SSE registers' [ 0.405694] x86/fpu: Supporting XSAVE feature 0x004: 'AVX registers' [ 0.405805] x86/fpu: xstate_offset[2]: 576, xstate_sizes[2]: 256 [ 0.405914] x86/fpu: Enabled xstate features 0x7, context size is 832 bytes, using 'standard' format. [ 0.429440] Freeing SMP alternatives memory: 40K [ 0.429563] pid_max: default: 32768 minimum: 301 [ 0.429608] LSM: initializing lsm=capability,selinux [ 0.429741] SELinux: Initializing. [ 0.429875] Mount-cache hash table entries: 1024 (order: 1, 8192 bytes, linear) [ 0.430019] Mountpoint-cache hash table entries: 1024 (order: 1, 8192 bytes, linear) [ 0.430706] cpu 0 spinlock event irq 57 [ 0.430820] VPMU disabled by hypervisor. [ 0.431314] Performance Events: PMU not available due to virtualization, using software events only. [ 0.431477] signal: max sigframe size: 1776 [ 0.431635] rcu: Hierarchical SRCU implementation. [ 0.431739] rcu: Max phase no-delay instances is 400. [ 0.437511] smp: Bringing up secondary CPUs ... [ 0.437775] installing Xen timer for CPU 1 [ 0.438153] installing Xen timer for CPU 2 [ 0.438507] installing Xen timer for CPU 3 [ 0.025960] [Firmware Bug]: CPU 1: APIC ID mismatch. CPUID: 0x0001 APIC: 0x0011 [ 0.438701] cpu 1 spinlock event irq 77 [ 0.025960] [Firmware Bug]: CPU 2: APIC ID mismatch. CPUID: 0x0002 APIC: 0x0012 [ 0.438905] cpu 2 spinlock event irq 78 [ 0.025960] [Firmware Bug]: CPU 3: APIC ID mismatch. CPUID: 0x0003 APIC: 0x0013 [ 0.439628] cpu 3 spinlock event irq 79 [ 0.439918] smp: Brought up 1 node, 4 CPUs [ 0.440627] devtmpfs: initialized [ 0.440729] x86/mm: Memory block size: 128MB [ 0.441310] ACPI: PM: Registering ACPI NVS region [mem 0xdfeb2000-0xdfedffff] (188416 bytes) [ 0.441643] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 1911260446275000 ns [ 0.441796] futex hash table entries: 1024 (order: 4, 65536 bytes, linear) [ 0.442010] PM: RTC time: 19:24:31, date: 2024-06-19 [ 0.442316] NET: Registered PF_NETLINK/PF_ROUTE protocol family [ 0.442475] xen:grant_table: Grant tables using version 1 layout [ 0.442602] Grant table initialized [ 0.442973] audit: initializing netlink subsys (disabled) [ 0.443118] audit: type=2000 audit(1718825072.049:1): state=initialized audit_enabled=0 res=1 [ 0.443118] thermal_sys: Registered thermal governor 'step_wise' [ 0.443118] thermal_sys: Registered thermal governor 'user_space' [ 0.443798] PCI: ECAM [mem 0xe0000000-0xefffffff] (base 0xe0000000) for domain 0000 [bus 00-ff] [ 0.444059] PCI: ECAM [mem 0xe0000000-0xefffffff] reserved as E820 entry [ 0.526147] PCI: Using configuration type 1 for base access [ 0.526326] kprobes: kprobe jump-optimization is enabled. All kprobes are optimized if possible. [ 0.526653] ACPI: Added _OSI(Module Device) [ 0.526725] ACPI: Added _OSI(Processor Device) [ 0.526832] ACPI: Added _OSI(3.0 _SCP Extensions) [ 0.526936] ACPI: Added _OSI(Processor Aggregator Device) [ 0.532247] ACPI: 2 ACPI AML tables successfully acquired and loaded [ 0.532783] xen: registering gsi 9 triggering 0 polarity 1 [ 0.532899] ACPI: _OSC evaluation for CPUs failed, trying _PDC [ 0.533837] ACPI: Interpreter enabled [ 0.533955] ACPI: PM: (supports S0 S1 S4 S5) [ 0.534058] ACPI: Using IOAPIC for interrupt routing [ 0.534197] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug [ 0.534373] PCI: Using E820 reservations for host bridge windows [ 0.534649] ACPI: Enabled 4 GPEs in block 00 to 1F [ 0.544753] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff]) [ 0.544870] acpi PNP0A08:00: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI HPX-Type3] [ 0.545022] acpi PNP0A08:00: _OSC: OS requested [PME PCIeCapability LTR] [ 0.545133] acpi PNP0A08:00: _OSC: platform willing to grant [PME PCIeCapability LTR] [ 0.545293] acpi PNP0A08:00: _OSC: platform retains control of PCIe features (AE_NOT_FOUND) [ 0.545747] PCI host bridge to bus 0000:00 [ 0.545850] pci_bus 0000:00: root bus resource [io 0x0000-0x0cf7 window] [ 0.545962] pci_bus 0000:00: root bus resource [io 0x0d00-0xffff window] [ 0.546078] pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff window] [ 0.546219] pci_bus 0000:00: root bus resource [mem 0x000d0000-0x000dffff window] [ 0.546364] pci_bus 0000:00: root bus resource [mem 0xf0000000-0xfebfffff window] [ 0.546528] pci_bus 0000:00: root bus resource [bus 00-ff] [ 0.546632] pci 0000:00:00.0: [1002:5a13] type 00 class 0x060000 conventional PCI endpoint [ 0.547231] pci 0000:00:00.2: [1002:5a23] type 00 class 0x080600 conventional PCI endpoint [ 0.547801] pci 0000:00:09.0: [1002:5a1c] type 01 class 0x060400 PCIe Root Port [ 0.548020] pci 0000:00:09.0: PCI bridge to [bus 01] [ 0.548139] pci 0000:00:09.0: bridge window [io 0xd000-0xdfff] [ 0.548254] pci 0000:00:09.0: bridge window [mem 0xfe900000-0xfe9fffff] [ 0.548464] pci 0000:00:09.0: enabling Extended Tags [ 0.548697] pci 0000:00:09.0: PME# supported from D0 D3hot D3cold [ 0.549013] pci 0000:00:0a.0: [1002:5a1d] type 01 class 0x060400 PCIe Root Port [ 0.549232] pci 0000:00:0a.0: PCI bridge to [bus 02] [ 0.549351] pci 0000:00:0a.0: bridge window [io 0xe000-0xefff] [ 0.549470] pci 0000:00:0a.0: bridge window [mem 0xfea00000-0xfeafffff] [ 0.549636] pci 0000:00:0a.0: enabling Extended Tags [ 0.549910] pci 0000:00:0a.0: PME# supported from D0 D3hot D3cold [ 0.550247] pci 0000:00:11.0: [1002:4390] type 00 class 0x01018f conventional PCI endpoint [ 0.550442] pci 0000:00:11.0: BAR 0 [io 0xc000-0xc007] [ 0.550573] pci 0000:00:11.0: BAR 1 [io 0xb000-0xb003] [ 0.550704] pci 0000:00:11.0: BAR 2 [io 0xa000-0xa007] [ 0.550833] pci 0000:00:11.0: BAR 3 [io 0x9000-0x9003] [ 0.550962] pci 0000:00:11.0: BAR 4 [io 0x8000-0x800f] [ 0.551091] pci 0000:00:11.0: BAR 5 [mem 0xfebfbc00-0xfebfbfff] [ 0.551325] pci 0000:00:11.0: set SATA to AHCI mode [ 0.551658] pci 0000:00:12.0: [1002:4397] type 00 class 0x0c0310 conventional PCI endpoint [ 0.551849] pci 0000:00:12.0: BAR 0 [mem 0xfebf9000-0xfebf9fff] [ 0.552242] pci 0000:00:12.1: [1002:4398] type 00 class 0x0c0310 conventional PCI endpoint [ 0.552438] pci 0000:00:12.1: BAR 0 [mem 0xfebfa000-0xfebfafff] [ 0.552887] pci 0000:00:12.2: [1002:4396] type 00 class 0x0c0320 conventional PCI endpoint [ 0.553078] pci 0000:00:12.2: BAR 0 [mem 0xfebfb800-0xfebfb8ff] [ 0.553430] pci 0000:00:12.2: supports D1 D2 [ 0.553532] pci 0000:00:12.2: PME# supported from D0 D1 D2 D3hot [ 0.553762] pci 0000:00:13.0: [1002:4397] type 00 class 0x0c0310 conventional PCI endpoint [ 0.553960] pci 0000:00:13.0: BAR 0 [mem 0xfebf7000-0xfebf7fff] [ 0.554357] pci 0000:00:13.1: [1002:4398] type 00 class 0x0c0310 conventional PCI endpoint [ 0.554549] pci 0000:00:13.1: BAR 0 [mem 0xfebf8000-0xfebf8fff] [ 0.554912] pci 0000:00:13.2: [1002:4396] type 00 class 0x0c0320 conventional PCI endpoint [ 0.555103] pci 0000:00:13.2: BAR 0 [mem 0xfebfb400-0xfebfb4ff] [ 0.555489] pci 0000:00:13.2: supports D1 D2 [ 0.555580] pci 0000:00:13.2: PME# supported from D0 D1 D2 D3hot [ 0.555873] pci 0000:00:14.0: [1002:4385] type 00 class 0x0c0500 conventional PCI endpoint [ 0.556425] pci 0000:00:14.1: [1002:439c] type 00 class 0x01018a conventional PCI endpoint [ 0.556626] pci 0000:00:14.1: BAR 0 [io 0x0000-0x0007] [ 0.556756] pci 0000:00:14.1: BAR 1 [io 0x0000-0x0003] [ 0.556886] pci 0000:00:14.1: BAR 2 [io 0x0000-0x0007] [ 0.557015] pci 0000:00:14.1: BAR 3 [io 0x0000-0x0003] [ 0.557169] pci 0000:00:14.1: BAR 4 [io 0xff00-0xff0f] [ 0.557337] pci 0000:00:14.1: BAR 0 [io 0x01f0-0x01f7]: legacy IDE quirk [ 0.557448] pci 0000:00:14.1: BAR 1 [io 0x03f6]: legacy IDE quirk [ 0.557556] pci 0000:00:14.1: BAR 2 [io 0x0170-0x0177]: legacy IDE quirk [ 0.557581] pci 0000:00:14.1: BAR 3 [io 0x0376]: legacy IDE quirk [ 0.557926] pci 0000:00:14.3: [1002:439d] type 00 class 0x060100 conventional PCI endpoint [ 0.558463] pci 0000:00:14.4: [1002:4384] type 01 class 0x060401 conventional PCI bridge [ 0.558674] pci 0000:00:14.4: PCI bridge to [bus 03] (subtractive decode) [ 0.558803] pci 0000:00:14.4: bridge window [mem 0xfdf00000-0xfe7fffff] [ 0.558924] pci 0000:00:14.4: bridge window [mem 0xfc000000-0xfcffffff pref] [ 0.559250] pci 0000:00:14.5: [1002:4399] type 00 class 0x0c0310 conventional PCI endpoint [ 0.559467] pci 0000:00:14.5: BAR 0 [mem 0xfebf6000-0xfebf6fff] [ 0.559882] pci 0000:00:18.0: [1022:1600] type 00 class 0x060000 conventional PCI endpoint [ 0.560253] pci 0000:00:18.1: [1022:1601] type 00 class 0x060000 conventional PCI endpoint [ 0.560617] pci 0000:00:18.2: [1022:1602] type 00 class 0x060000 conventional PCI endpoint [ 0.560974] pci 0000:00:18.3: [1022:1603] type 00 class 0x060000 conventional PCI endpoint [ 0.561342] pci 0000:00:18.4: [1022:1604] type 00 class 0x060000 conventional PCI endpoint [ 0.561664] pci 0000:00:18.5: [1022:1605] type 00 class 0x060000 conventional PCI endpoint [ 0.562223] pci 0000:01:00.0: [8086:10d3] type 00 class 0x020000 PCIe Endpoint [ 0.562419] pci 0000:01:00.0: BAR 0 [mem 0xfe9e0000-0xfe9fffff] [ 0.562585] pci 0000:01:00.0: BAR 2 [io 0xd800-0xd81f] [ 0.562720] pci 0000:01:00.0: BAR 3 [mem 0xfe9dc000-0xfe9dffff] [ 0.563124] pci 0000:01:00.0: PME# supported from D0 D3hot D3cold [ 0.565621] pci 0000:00:09.0: PCI bridge to [bus 01] [ 0.565924] pci 0000:02:00.0: [8086:10d3] type 00 class 0x020000 PCIe Endpoint [ 0.566189] pci 0000:02:00.0: BAR 0 [mem 0xfeae0000-0xfeafffff] [ 0.566390] pci 0000:02:00.0: BAR 2 [io 0xe800-0xe81f] [ 0.566527] pci 0000:02:00.0: BAR 3 [mem 0xfeadc000-0xfeadffff] [ 0.566878] pci 0000:02:00.0: PME# supported from D0 D3hot D3cold [ 0.567395] pci 0000:00:0a.0: PCI bridge to [bus 02] [ 0.567567] pci_bus 0000:03: extended config space not accessible [ 0.567640] pci 0000:03:04.0: [102b:0532] type 00 class 0x030000 conventional PCI endpoint [ 0.567858] pci 0000:03:04.0: BAR 0 [mem 0xfc000000-0xfcffffff pref] [ 0.567998] pci 0000:03:04.0: BAR 1 [mem 0xfdffc000-0xfdffffff] [ 0.568165] pci 0000:03:04.0: BAR 2 [mem 0xfe000000-0xfe7fffff] [ 0.568443] pci 0000:03:04.0: Video device with shadowed ROM at [mem 0x000c0000-0x000dffff] [ 0.568840] pci 0000:00:14.4: PCI bridge to [bus 03] (subtractive decode) [ 0.569030] pci 0000:00:14.4: bridge window [io 0x0000-0x0cf7 window] (subtractive decode) [ 0.569178] pci 0000:00:14.4: bridge window [io 0x0d00-0xffff window] (subtractive decode) [ 0.569582] pci 0000:00:14.4: bridge window [mem 0x000a0000-0x000bffff window] (subtractive decode) [ 0.569733] pci 0000:00:14.4: bridge window [mem 0x000d0000-0x000dffff window] (subtractive decode) [ 0.569881] pci 0000:00:14.4: bridge window [mem 0xf0000000-0xfebfffff window] (subtractive decode) [ 0.570165] pci_bus 0000:00: on NUMA node 0 [ 0.570615] xen: registering gsi 13 triggering 1 polarity 0 [ 0.571119] ACPI: PCI: Interrupt link LNKA configured for IRQ 10 [ 0.571313] ACPI: PCI: Interrupt link LNKB configured for IRQ 11 [ 0.571527] ACPI: PCI: Interrupt link LNKC configured for IRQ 10 [ 0.571649] ACPI: PCI: Interrupt link LNKD configured for IRQ 10 [ 0.571863] ACPI: PCI: Interrupt link LNKE configured for IRQ 7 [ 0.572077] ACPI: PCI: Interrupt link LNKF configured for IRQ 10 [ 0.572255] ACPI: PCI: Interrupt link LNKG configured for IRQ 11 [ 0.572430] ACPI: PCI: Interrupt link LNKH configured for IRQ 10 [ 0.572662] xen:balloon: Initialising balloon driver [ 0.572852] iommu: Default domain type: Translated [ 0.572852] iommu: DMA domain TLB invalidation policy: lazy mode [ 0.573019] SCSI subsystem initialized [ 0.573603] libata version 3.00 loaded. [ 0.573639] ACPI: bus type USB registered [ 0.573778] usbcore: registered new interface driver usbfs [ 0.573898] usbcore: registered new interface driver hub [ 0.574019] usbcore: registered new device driver usb [ 0.574191] pps_core: LinuxPPS API ver. 1 registered [ 0.574302] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti [ 0.574460] PTP clock support registered [ 0.574628] Advanced Linux Sound Architecture Driver Initialized. [ 0.575069] NetLabel: Initializing [ 0.575174] NetLabel: domain hash size = 128 [ 0.575303] NetLabel: protocols = UNLABELED CIPSOv4 CALIPSO [ 0.575605] NetLabel: unlabeled traffic allowed by default [ 0.575743] PCI: Using ACPI for IRQ routing [ 0.607911] PCI: pci_cache_line_size set to 64 bytes [ 0.608112] e820: reserve RAM buffer [mem 0x0009a000-0x0009ffff] [ 0.608116] e820: reserve RAM buffer [mem 0x20066000-0x23ffffff] [ 0.608143] pci 0000:03:04.0: vgaarb: setting as boot VGA device [ 0.608143] pci 0000:03:04.0: vgaarb: bridge control possible [ 0.608143] pci 0000:03:04.0: vgaarb: VGA device added: decodes=io+mem,owns=io+mem,locks=none [ 0.608581] vgaarb: loaded [ 0.609467] clocksource: Switched to clocksource tsc-early [ 0.609467] VFS: Disk quotas dquot_6.6.0 [ 0.609467] VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes) [ 0.609467] hugetlbfs: disabling because there are no supported hugepage sizes [ 0.609467] pnp: PnP ACPI init [ 0.609631] system 00:00: [mem 0xfec20000-0xfec200ff] could not be reserved [ 0.609705] system 00:01: [mem 0xf6000000-0xf6003fff] has been reserved [ 0.609705] xen: registering gsi 8 triggering 1 polarity 0 [ 0.609705] system 00:03: [io 0x0a10-0x0a1f] has been reserved [ 0.610892] system 00:04: [mem 0xfec00000-0xfec00fff] could not be reserved [ 0.611014] system 00:04: [mem 0xfee00000-0xfee00fff] has been reserved [ 0.611463] system 00:05: [io 0x0ca2-0x0ca3] has been reserved [ 0.611615] system 00:05: [io 0x0550-0x0551] has been reserved [ 0.611739] system 00:05: [io 0x04d0-0x04d1] has been reserved [ 0.611861] system 00:05: [io 0x040b] has been reserved [ 0.611975] system 00:05: [io 0x04d6] has been reserved [ 0.612086] system 00:05: [io 0x0c00-0x0c01] has been reserved [ 0.612200] system 00:05: [io 0x0c14] has been reserved [ 0.612312] system 00:05: [io 0x0c50-0x0c51] has been reserved [ 0.612426] system 00:05: [io 0x0c52] has been reserved [ 0.612537] system 00:05: [io 0x0c6c] has been reserved [ 0.612655] system 00:05: [io 0x0c6f] has been reserved [ 0.612767] system 00:05: [io 0x0cd0-0x0cd1] has been reserved [ 0.612898] system 00:05: [io 0x0cd2-0x0cd3] has been reserved [ 0.613012] system 00:05: [io 0x0cd4-0x0cd5] has been reserved [ 0.613142] system 00:05: [io 0x0cd6-0x0cd7] has been reserved [ 0.613257] system 00:05: [io 0x0cd8-0x0cdf] has been reserved [ 0.613372] system 00:05: [io 0x0800-0x089f] has been reserved [ 0.613486] system 00:05: [io 0x0b00-0x0b0f] has been reserved [ 0.613609] system 00:05: [io 0x0b20-0x0b3f] has been reserved [ 0.613723] system 00:05: [io 0x0900-0x090f] has been reserved [ 0.613841] system 00:05: [io 0x0910-0x091f] has been reserved [ 0.613955] system 00:05: [io 0xfe00-0xfefe] has been reserved [ 0.614094] system 00:05: [mem 0xffb80000-0xffbfffff] has been reserved [ 0.614211] system 00:05: [mem 0xfec10000-0xfec1001f] has been reserved [ 0.614327] system 00:05: [mem 0xffe50000-0xffe5e05f] has been reserved [ 0.614715] xen: registering gsi 4 triggering 1 polarity 0 [ 0.614720] Already setup the GSI :4 [ 0.614825] pnp 00:06: [dma 0 disabled] [ 0.615134] xen: registering gsi 3 triggering 1 polarity 0 [ 0.615145] pnp 00:07: [dma 0 disabled] [ 0.615308] system 00:08: [mem 0xe0000000-0xefffffff] has been reserved [ 0.615686] pnp 00:09: disabling [mem 0x000c0000-0x000cffff] because it overlaps 0000:03:04.0 BAR 6 [mem 0x000c0000-0x000dffff] [ 0.615880] system 00:09: [mem 0x00000000-0x0009ffff] could not be reserved [ 0.616015] system 00:09: [mem 0x000e0000-0x000fffff] could not be reserved [ 0.616133] system 00:09: [mem 0x00100000-0xdfffffff] could not be reserved [ 0.616252] system 00:09: [mem 0xfec00000-0xffffffff] could not be reserved [ 0.616558] pnp: PnP ACPI: found 10 devices [ 0.638743] PM-Timer failed consistency check (0xffffff) - aborting. [ 0.638889] NET: Registered PF_INET protocol family [ 0.639056] IP idents hash table entries: 8192 (order: 4, 65536 bytes, linear) [ 0.639502] tcp_listen_portaddr_hash hash table entries: 256 (order: 0, 4096 bytes, linear) [ 0.639696] Table-perturb hash table entries: 65536 (order: 6, 262144 bytes, linear) [ 0.639868] TCP established hash table entries: 4096 (order: 3, 32768 bytes, linear) [ 0.640046] TCP bind hash table entries: 4096 (order: 5, 131072 bytes, linear) [ 0.640215] TCP: Hash tables configured (established 4096 bind 4096) [ 0.640355] UDP hash table entries: 256 (order: 1, 8192 bytes, linear) [ 0.640475] UDP-Lite hash table entries: 256 (order: 1, 8192 bytes, linear) [ 0.640642] NET: Registered PF_UNIX/PF_LOCAL protocol family [ 0.641011] RPC: Registered named UNIX socket transport module. [ 0.641134] RPC: Registered udp transport module. [ 0.641243] RPC: Registered tcp transport module. [ 0.641351] RPC: Registered tcp-with-tls transport module. [ 0.641461] RPC: Registered tcp NFSv4.1 backchannel transport module. [ 0.642136] pci 0000:00:09.0: PCI bridge to [bus 01] [ 0.642269] pci 0000:00:09.0: bridge window [io 0xd000-0xdfff] [ 0.642396] pci 0000:00:09.0: bridge window [mem 0xfe900000-0xfe9fffff] [ 0.642534] pci 0000:00:0a.0: PCI bridge to [bus 02] [ 0.642655] pci 0000:00:0a.0: bridge window [io 0xe000-0xefff] [ 0.642780] pci 0000:00:0a.0: bridge window [mem 0xfea00000-0xfeafffff] [ 0.642919] pci 0000:00:14.4: PCI bridge to [bus 03] [ 0.643041] pci 0000:00:14.4: bridge window [mem 0xfdf00000-0xfe7fffff] [ 0.643166] pci 0000:00:14.4: bridge window [mem 0xfc000000-0xfcffffff pref] [ 0.643356] pci_bus 0000:00: resource 4 [io 0x0000-0x0cf7 window] [ 0.643471] pci_bus 0000:00: resource 5 [io 0x0d00-0xffff window] [ 0.643596] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff window] [ 0.643747] pci_bus 0000:00: resource 7 [mem 0x000d0000-0x000dffff window] [ 0.643865] pci_bus 0000:00: resource 8 [mem 0xf0000000-0xfebfffff window] [ 0.643982] pci_bus 0000:01: resource 0 [io 0xd000-0xdfff] [ 0.644094] pci_bus 0000:01: resource 1 [mem 0xfe900000-0xfe9fffff] [ 0.644209] pci_bus 0000:02: resource 0 [io 0xe000-0xefff] [ 0.644321] pci_bus 0000:02: resource 1 [mem 0xfea00000-0xfeafffff] [ 0.644436] pci_bus 0000:03: resource 1 [mem 0xfdf00000-0xfe7fffff] [ 0.644586] pci_bus 0000:03: resource 2 [mem 0xfc000000-0xfcffffff pref] [ 0.644704] pci_bus 0000:03: resource 4 [io 0x0000-0x0cf7 window] [ 0.644819] pci_bus 0000:03: resource 5 [io 0x0d00-0xffff window] [ 0.644937] pci_bus 0000:03: resource 6 [mem 0x000a0000-0x000bffff window] [ 0.645072] pci_bus 0000:03: resource 7 [mem 0x000d0000-0x000dffff window] [ 0.645189] pci_bus 0000:03: resource 8 [mem 0xf0000000-0xfebfffff window] [ 0.645459] xen: registering gsi 16 triggering 0 polarity 1 [ 0.645485] xen: --> pirq=16 -> irq=16 (gsi=16) [ 1.308735] pci 0000:00:12.0: quirk_usb_early_handoff+0x0/0x7c0 took 647799 usecs [ 1.308977] xen: registering gsi 16 triggering 0 polarity 1 [ 1.308985] Already setup the GSI :16 [ 1.332733] pci 0000:00:12.1: quirk_usb_early_handoff+0x0/0x7c0 took 23260 usecs [ 1.332979] xen: registering gsi 17 triggering 0 polarity 1 [ 1.333025] xen: --> pirq=17 -> irq=17 (gsi=17) [ 1.333215] xen: registering gsi 18 triggering 0 polarity 1 [ 1.333237] xen: --> pirq=18 -> irq=18 (gsi=18) [ 1.356731] pci 0000:00:13.0: quirk_usb_early_handoff+0x0/0x7c0 took 23022 usecs [ 1.356973] xen: registering gsi 18 triggering 0 polarity 1 [ 1.356981] Already setup the GSI :18 [ 1.380730] pci 0000:00:13.1: quirk_usb_early_handoff+0x0/0x7c0 took 23261 usecs [ 1.380980] xen: registering gsi 19 triggering 0 polarity 1 [ 1.381019] xen: --> pirq=19 -> irq=19 (gsi=19) [ 1.381241] xen: registering gsi 18 triggering 0 polarity 1 [ 1.381246] Already setup the GSI :18 [ 1.405729] pci 0000:00:14.5: quirk_usb_early_handoff+0x0/0x7c0 took 23970 usecs [ 1.405961] PCI: CLS 64 bytes, default 64 [ 1.406126] PCI-DMA: Using software bounce buffering for IO (SWIOTLB) [ 1.406243] software IO TLB: mapped [mem 0x000000001b180000-0x000000001f180000] (64MB) [ 1.406282] Unpacking initramfs... [ 1.406439] kvm_intel: VMX not supported by CPU 0 [ 1.406632] kvm_amd: SVM not supported by CPU 0 [ 1.406743] clocksource: tsc: mask: 0xffffffffffffffff max_cycles: 0x285c4c04d54, max_idle_ns: 440795212551 ns [ 1.410602] clocksource: Switched to clocksource tsc [ 1.472912] Initialise system trusted keyrings [ 1.473160] workingset: timestamp_bits=62 max_order=17 bucket_order=0 [ 1.473455] NFS: Registering the id_resolver key type [ 1.473569] Key type id_resolver registered [ 1.473669] Key type id_legacy registered [ 1.473855] 9p: Installing v9fs 9p2000 file system support [ 1.491273] Key type asymmetric registered [ 1.491378] Asymmetric key parser 'x509' registered [ 1.491503] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 251) [ 1.491655] io scheduler mq-deadline registered [ 1.491757] io scheduler kyber registered [ 1.492244] xen: registering gsi 53 triggering 0 polarity 1 [ 1.492275] xen: --> pirq=53 -> irq=53 (gsi=53) [ 1.492573] xen: registering gsi 54 triggering 0 polarity 1 [ 1.492591] xen: --> pirq=54 -> irq=54 (gsi=54) [ 1.492920] input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input0 [ 1.493118] ACPI: button: Power Button [PWRB] [ 1.493262] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input1 [ 1.493531] ACPI: button: Power Button [PWRF] [ 1.495742] ACPI: \_PR_.P001: Found 2 idle states [ 1.496022] ACPI: \_PR_.P002: Found 2 idle states [ 1.496173] ACPI: \_PR_.P003: Found 2 idle states [ 1.496325] ACPI: \_PR_.P004: Found 2 idle states [ 1.496924] xen:xen_evtchn: Event-channel device installed [ 1.497151] xen_pciback: backend is vpci [ 1.497942] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled [ 1.498354] 00:07: ttyS1 at I/O 0x2f8 (irq = 3, base_baud = 115200) is a 16550A [ 1.500649] hpet_acpi_add: no address or irqs in _CRS [ 1.500822] Non-volatile memory driver v1.3 [ 1.503567] loop: module loaded [ 1.510020] ahci 0000:00:11.0: version 3.0 [ 1.510123] xen: registering gsi 22 triggering 0 polarity 1 [ 1.510153] xen: --> pirq=22 -> irq=22 (gsi=22) [ 1.510301] ahci 0000:00:11.0: AHCI vers 0001.0100, 32 command slots, 3 Gbps, SATA mode [ 1.510451] ahci 0000:00:11.0: 4/4 ports implemented (port mask 0xf) [ 1.510561] ahci 0000:00:11.0: flags: 64bit ncq sntf ilck pm led clo pmp pio slum part ccc [ 1.511787] scsi host0: ahci [ 1.512146] scsi host1: ahci [ 1.512483] scsi host2: ahci [ 1.512846] scsi host3: ahci [ 1.513008] ata1: SATA max UDMA/133 abar m1024@0xfebfbc00 port 0xfebfbd00 irq 22 lpm-pol 0 [ 1.513169] ata2: SATA max UDMA/133 abar m1024@0xfebfbc00 port 0xfebfbd80 irq 22 lpm-pol 0 [ 1.513313] ata3: SATA max UDMA/133 abar m1024@0xfebfbc00 port 0xfebfbe00 irq 22 lpm-pol 0 [ 1.513456] ata4: SATA max UDMA/133 abar m1024@0xfebfbc00 port 0xfebfbe80 irq 22 lpm-pol 0 [ 1.514013] tun: Universal TUN/TAP device driver, 1.6 [ 1.514224] e100: Intel(R) PRO/100 Network Driver [ 1.514352] e100: Copyright(c) 1999-2006 Intel Corporation [ 1.514471] sky2: driver version 1.30 [ 1.514625] xen_netfront: Initialising Xen virtual ethernet driver [ 1.514996] xen: registering gsi 16 triggering 0 polarity 1 [ 1.515002] Already setup the GSI :16 [ 1.515101] xen: registering gsi 17 triggering 0 polarity 1 [ 1.515148] Already setup the GSI :17 [ 1.515185] ohci-pci 0000:00:12.0: OHCI PCI host controller [ 1.515463] ohci-pci 0000:00:12.0: new USB bus registered, assigned bus number 1 [ 1.515502] xen: registering gsi 19 triggering 0 polarity 1 [ 1.515631] Already setup the GSI :19 [ 1.515739] ohci-pci 0000:00:12.0: irq 16, io mem 0xfebf9000 [ 1.561750] Freeing initrd memory: 20192K [ 1.571125] usb usb1: New USB device found, idVendor=1d6b, idProduct=0001, bcdDevice= 6.10 [ 1.571280] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 1.571421] usb usb1: Product: OHCI PCI host controller [ 1.571526] usb usb1: Manufacturer: Linux 6.10.0-rc4+ ohci_hcd [ 1.571634] usb usb1: SerialNumber: 0000:00:12.0 [ 1.572024] hub 1-0:1.0: USB hub found [ 1.572137] hub 1-0:1.0: 3 ports detected [ 1.572524] xen: registering gsi 16 triggering 0 polarity 1 [ 1.572533] Already setup the GSI :16 [ 1.572624] ehci-pci 0000:00:12.2: EHCI Host Controller [ 1.572898] ehci-pci 0000:00:12.2: new USB bus registered, assigned bus number 2 [ 1.573088] ehci-pci 0000:00:12.2: applying AMD SB700/SB800/Hudson-2/3 EHCI dummy qh workaround [ 1.573258] ehci-pci 0000:00:12.2: debug port 1 [ 1.573507] ehci-pci 0000:00:12.2: irq 17, io mem 0xfebfb800 [ 1.580020] ehci-pci 0000:00:12.2: USB 2.0 started, EHCI 1.00 [ 1.580373] usb usb2: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 6.10 [ 1.580528] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 1.580668] usb usb2: Product: EHCI Host Controller [ 1.580772] usb usb2: Manufacturer: Linux 6.10.0-rc4+ ehci_hcd [ 1.580879] usb usb2: SerialNumber: 0000:00:12.2 [ 1.581250] hub 2-0:1.0: USB hub found [ 1.581386] hub 2-0:1.0: 6 ports detected [ 1.633040] hub 1-0:1.0: USB hub found [ 1.633157] hub 1-0:1.0: 3 ports detected [ 1.633579] ehci-pci 0000:00:13.2: EHCI Host Controller [ 1.633814] ehci-pci 0000:00:13.2: new USB bus registered, assigned bus number 3 [ 1.633959] ehci-pci 0000:00:13.2: applying AMD SB700/SB800/Hudson-2/3 EHCI dummy qh workaround [ 1.634172] ehci-pci 0000:00:13.2: debug port 1 [ 1.634399] ehci-pci 0000:00:13.2: irq 19, io mem 0xfebfb400 [ 1.641013] ehci-pci 0000:00:13.2: USB 2.0 started, EHCI 1.00 [ 1.641198] usb usb3: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 6.10 [ 1.641381] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 1.641527] usb usb3: Product: EHCI Host Controller [ 1.641630] usb usb3: Manufacturer: Linux 6.10.0-rc4+ ehci_hcd [ 1.641737] usb usb3: SerialNumber: 0000:00:13.2 [ 1.642049] hub 3-0:1.0: USB hub found [ 1.642159] hub 3-0:1.0: 6 ports detected [ 1.642504] ohci-pci 0000:00:12.1: OHCI PCI host controller [ 1.642765] ohci-pci 0000:00:12.1: new USB bus registered, assigned bus number 4 [ 1.642945] ohci-pci 0000:00:12.1: irq 16, io mem 0xfebfa000 [ 1.699145] usb usb4: New USB device found, idVendor=1d6b, idProduct=0001, bcdDevice= 6.10 [ 1.699299] usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 1.699439] usb usb4: Product: OHCI PCI host controller [ 1.699583] usb usb4: Manufacturer: Linux 6.10.0-rc4+ ohci_hcd [ 1.699690] usb usb4: SerialNumber: 0000:00:12.1 [ 1.700000] hub 4-0:1.0: USB hub found [ 1.700125] hub 4-0:1.0: 3 ports detected [ 1.700501] xen: registering gsi 18 triggering 0 polarity 1 [ 1.700506] Already setup the GSI :18 [ 1.700643] ohci-pci 0000:00:13.0: OHCI PCI host controller [ 1.700866] ohci-pci 0000:00:13.0: new USB bus registered, assigned bus number 5 [ 1.701086] ohci-pci 0000:00:13.0: irq 18, io mem 0xfebf7000 [ 1.757109] usb usb5: New USB device found, idVendor=1d6b, idProduct=0001, bcdDevice= 6.10 [ 1.757262] usb usb5: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 1.757430] usb usb5: Product: OHCI PCI host controller [ 1.757535] usb usb5: Manufacturer: Linux 6.10.0-rc4+ ohci_hcd [ 1.757643] usb usb5: SerialNumber: 0000:00:13.0 [ 1.757953] hub 5-0:1.0: USB hub found [ 1.758078] hub 5-0:1.0: 3 ports detected [ 1.758415] xen: registering gsi 18 triggering 0 polarity 1 [ 1.758421] Already setup the GSI :18 [ 1.758558] ohci-pci 0000:00:13.1: OHCI PCI host controller [ 1.758842] ohci-pci 0000:00:13.1: new USB bus registered, assigned bus number 6 [ 1.759050] ohci-pci 0000:00:13.1: irq 18, io mem 0xfebf8000 [ 1.815140] usb usb6: New USB device found, idVendor=1d6b, idProduct=0001, bcdDevice= 6.10 [ 1.815294] usb usb6: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 1.815435] usb usb6: Product: OHCI PCI host controller [ 1.815539] usb usb6: Manufacturer: Linux 6.10.0-rc4+ ohci_hcd [ 1.815646] usb usb6: SerialNumber: 0000:00:13.1 [ 1.815957] hub 6-0:1.0: USB hub found [ 1.816114] hub 6-0:1.0: 3 ports detected [ 1.816448] xen: registering gsi 18 triggering 0 polarity 1 [ 1.816454] Already setup the GSI :18 [ 1.816590] ohci-pci 0000:00:14.5: OHCI PCI host controller [ 1.816771] ohci-pci 0000:00:14.5: new USB bus registered, assigned bus number 7 [ 1.816944] ohci-pci 0000:00:14.5: irq 18, io mem 0xfebf6000 [ 1.825190] ata4: SATA link down (SStatus 0 SControl 300) [ 1.825404] ata3: SATA link down (SStatus 0 SControl 300) [ 1.873166] usb usb7: New USB device found, idVendor=1d6b, idProduct=0001, bcdDevice= 6.10 [ 1.873321] usb usb7: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 1.873489] usb usb7: Product: OHCI PCI host controller [ 1.873594] usb usb7: Manufacturer: Linux 6.10.0-rc4+ ohci_hcd [ 1.873701] usb usb7: SerialNumber: 0000:00:14.5 [ 1.874072] hub 7-0:1.0: USB hub found [ 1.874244] hub 7-0:1.0: 2 ports detected [ 1.874697] usbcore: registered new interface driver usblp [ 1.874828] usbcore: registered new interface driver usb-storage [ 1.874991] i8042: PNP: No PS/2 controller found. [ 1.875096] i8042: Probing ports directly. [ 1.878125] serio: i8042 KBD port at 0x60,0x64 irq 1 [ 1.878234] serio: i8042 AUX port at 0x60,0x64 irq 12 [ 1.878712] rtc_cmos 00:02: RTC can wake from S4 [ 1.879288] rtc_cmos 00:02: registered as rtc0 [ 1.879439] rtc_cmos 00:02: alarms up to one month, y3k, 114 bytes nvram [ 1.879623] device-mapper: uevent: version 1.0.3 [ 1.879903] device-mapper: ioctl: 4.48.0-ioctl (2023-03-01) initialised: dm-devel@lists.linux.dev [ 1.880070] amd_pstate: the _CPC object is not present in SBIOS or ACPI disabled [ 1.880227] hid: raw HID events driver (C) Jiri Kosina [ 1.880544] usbcore: registered new interface driver usbhid [ 1.880651] usbhid: USB HID core driver [ 1.881266] Initializing XFRM netlink socket [ 1.881390] NET: Registered PF_INET6 protocol family [ 1.882004] Segment Routing with IPv6 [ 1.882139] In-situ OAM (IOAM) with IPv6 [ 1.882281] sit: IPv6, IPv4 and MPLS over IPv4 tunneling driver [ 1.882547] NET: Registered PF_PACKET protocol family [ 1.882708] 9pnet: Installing 9P2000 support [ 1.882831] Key type dns_resolver registered [ 1.882947] x86/pm: family 0x15 cpu detected, MSR saving is needed during suspending. [ 1.883447] IPI shorthand broadcast: enabled [ 1.888031] sched_clock: Marking stable (1863003737, 24960019)->(1895520008, -7556252) [ 1.888625] Timer migration: 1 hierarchy levels; 8 children per group; 1 crossnode level [ 1.888946] registered taskstats version 1 [ 1.889058] Loading compiled-in X.509 certificates [ 1.891256] PM: Magic number: 12:817:445 [ 1.891415] printk: legacy console [netcon0] enabled [ 1.891521] netconsole: network logging started [ 1.891721] cfg80211: Loading compiled-in X.509 certificates for regulatory database [ 1.902016] Loaded X.509 cert 'sforshee: 00b28ddf47aef9cea7' [ 1.902409] Loaded X.509 cert 'wens: 61c038651aabdcf94bd0ac7ff06c7248db18c600' [ 1.902574] ALSA device list: [ 1.902673] No soundcards found. [ 1.904984] cfg80211: loaded regulatory.db is malformed or signature is missing/invalid [ 1.979047] ata2: SATA link up 3.0 Gbps (SStatus 123 SControl 300) [ 1.979192] ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300) [ 1.979717] ata2.00: ATA-9: WDC WD1003FZEX-00MK2A0, 01.01A01, max UDMA/133 [ 1.980422] ata2.00: 1953525168 sectors, multi 16: LBA48 NCQ (depth 32), AA [ 1.980736] ata1.00: ATA-8: WDC WD1003FBYZ-010FB0, 01.01V03, max UDMA/133 [ 1.981218] ata1.00: 1953525168 sectors, multi 16: LBA48 NCQ (depth 32), AA [ 1.981495] ata2.00: configured for UDMA/133 [ 1.982836] ata1.00: configured for UDMA/133 [ 1.983117] scsi 0:0:0:0: Direct-Access ATA WDC WD1003FBYZ-0 1V03 PQ: 0 ANSI: 5 [ 1.983652] sd 0:0:0:0: Attached scsi generic sg0 type 0 [ 1.983734] sd 0:0:0:0: [sda] 1953525168 512-byte logical blocks: (1.00 TB/932 GiB) [ 1.984029] sd 0:0:0:0: [sda] Write Protect is off [ 1.984145] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00 [ 1.984167] scsi 1:0:0:0: Direct-Access ATA WDC WD1003FZEX-0 1A01 PQ: 0 ANSI: 5 [ 1.984200] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 1.984560] sd 0:0:0:0: [sda] Preferred minimum I/O size 512 bytes [ 1.984673] sd 1:0:0:0: Attached scsi generic sg1 type 0 [ 1.984842] sd 1:0:0:0: [sdb] 1953525168 512-byte logical blocks: (1.00 TB/932 GiB) [ 1.985013] sd 1:0:0:0: [sdb] 4096-byte physical blocks [ 1.985135] sd 1:0:0:0: [sdb] Write Protect is off [ 1.985281] sd 1:0:0:0: [sdb] Mode Sense: 00 3a 00 00 [ 1.985321] sd 1:0:0:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 1.985510] sd 1:0:0:0: [sdb] Preferred minimum I/O size 4096 bytes [ 2.005633] sd 0:0:0:0: [sda] Attached SCSI disk [ 2.011758] sdb: sdb1 sdb2 < sdb5 > [ 2.012162] sd 1:0:0:0: [sdb] Attached SCSI disk [ 2.013767] Freeing unused kernel image (initmem) memory: 2680K [ 2.013902] Write protecting the kernel read-only data: 24576k [ 2.026524] Freeing unused kernel image (rodata/data gap) memory: 2028K [ 2.138121] x86/mm: Checked W+X mappings: passed, no W+X pages found. [ 2.138244] Run /init as init process [ 2.138343] with arguments: [ 2.138344] /init [ 2.138346] placeholder [ 2.138347] with environment: [ 2.138348] HOME=/ [ 2.138350] TERM=linux [ 2.139030] usb 6-2: new full-speed USB device number 2 using ohci-pci [ 2.301717] usb 6-2: New USB device found, idVendor=0557, idProduct=2221, bcdDevice= 0.01 [ 2.301880] usb 6-2: New USB device strings: Mfr=1, Product=2, SerialNumber=0 [ 2.302008] usb 6-2: Product: Hermon USB hidmouse Device [ 2.302115] usb 6-2: Manufacturer: Winbond Electronics Corp [ 2.309171] input: Winbond Electronics Corp Hermon USB hidmouse Device as /devices/pci0000:00/0000:00:13.1/usb6/6-2/6-2:1.0/0003:0557:2221.0001/input/input5 [ 2.309514] hid-generic 0003:0557:2221.0001: input,hidraw0: USB HID v1.00 Mouse [Winbond Electronics Corp Hermon USB hidmouse Device] on usb-0000:00:13.1-2/input0 [ 2.313354] input: Winbond Electronics Corp Hermon USB hidmouse Device as /devices/pci0000:00/0000:00:13.1/usb6/6-2/6-2:1.1/0003:0557:2221.0002/input/input6 [ 2.365392] hid-generic 0003:0557:2221.0002: input,hidraw1: USB HID v1.00 Keyboard [Winbond Electronics Corp Hermon USB hidmouse Device] on usb-0000:00:13.1-2/input1 [ 2.407370] e1000e: Intel(R) PRO/1000 Network Driver [ 2.407493] e1000e: Copyright(c) 1999 - 2015 Intel Corporation. [ 2.407723] xen: registering gsi 48 triggering 0 polarity 1 [ 2.407762] xen: --> pirq=48 -> irq=48 (gsi=48) [ 2.408013] e1000e 0000:01:00.0: Interrupt Throttling Rate (ints/sec) set to dynamic conservative mode [ 2.457858] e1000e 0000:01:00.0 0000:01:00.0 (uninitialized): registered PHC clock [ 2.501859] e1000e 0000:01:00.0 eth0: (PCI Express:2.5GT/s:Width x1) 00:25:90:ae:e9:2a [ 2.502028] e1000e 0000:01:00.0 eth0: Intel(R) PRO/1000 Network Connection [ 2.502220] e1000e 0000:01:00.0 eth0: MAC: 3, PHY: 8, PBA No: 0100FF-0FF [ 2.502435] xen: registering gsi 47 triggering 0 polarity 1 [ 2.502462] xen: --> pirq=47 -> irq=47 (gsi=47) [ 2.502686] e1000e 0000:02:00.0: Interrupt Throttling Rate (ints/sec) set to dynamic conservative mode [ 2.549047] e1000e 0000:02:00.0 0000:02:00.0 (uninitialized): registered PHC clock [ 2.564038] random: crng init done [ 2.594950] e1000e 0000:02:00.0 eth1: (PCI Express:2.5GT/s:Width x1) 00:25:90:ae:e9:2b [ 2.595138] e1000e 0000:02:00.0 eth1: Intel(R) PRO/1000 Network Connection [ 2.595373] e1000e 0000:02:00.0 eth1: MAC: 3, PHY: 8, PBA No: 0100FF-0FF [ 2.597558] e1000e 0000:01:00.0 enx002590aee92a: renamed from eth0 [ 2.598108] e1000e 0000:02:00.0 enx002590aee92b: renamed from eth1 [ 3.298001] EXT4-fs (dm-0): mounting ext3 file system using the ext4 subsystem [ 3.313541] EXT4-fs (dm-0): mounted filesystem c37084ad-62e8-49a4-9df0-cdd7ced4eae8 ro with ordered data mode. Quota mode: none. [ 7.420098] EXT4-fs (dm-0): re-mounted c37084ad-62e8-49a4-9df0-cdd7ced4eae8 r/w. Quota mode: none. [ 8.272226] EXT4-fs (sdb1): mounting ext3 file system using the ext4 subsystem [ 8.284099] EXT4-fs (sdb1): mounted filesystem 051cea1d-b0ad-4445-9e0f-e7c116bf0e98 r/w with ordered data mode. Quota mode: none. [ 8.360668] Adding 1949692k swap on /dev/mapper/pinot1--vg-swap_1. Priority:-2 extents:1 across:1949692k [ 9.890701] xenbr0: port 1(enx002590aee92a) entered blocking state [ 9.890840] xenbr0: port 1(enx002590aee92a) entered disabled state [ 9.890986] e1000e 0000:01:00.0 enx002590aee92a: entered allmulticast mode [ 9.891177] e1000e 0000:01:00.0 enx002590aee92a: entered promiscuous mode [ 13.043002] e1000e 0000:01:00.0 enx002590aee92a: NIC Link is Up 1000 Mbps Full Duplex, Flow Control: None [ 13.043537] xenbr0: port 1(enx002590aee92a) entered blocking state [ 13.043649] xenbr0: port 1(enx002590aee92a) entered forwarding state