[ 0.000000] Booting Linux on physical CPU 0x0 [ 0.000000] Linux version 6.1.0-21-armmp-lpae (debian-kernel@lists.debian.org) (gcc-12 (Debian 12.2.0-14) 12.2.0, GNU ld (GNU Binutils for Debian) 2.40) #1 SMP Debian 6.1.90-1 (2024-05-03) [ 0.000000] CPU: ARMv7 Processor [410fc074] revision 4 (ARMv7), cr=30c5387d [ 0.000000] CPU: div instructions available: patching division code [ 0.000000] CPU: PIPT / VIPT nonaliasing data cache, VIPT aliasing instruction cache [ 0.000000] OF: fdt: Machine model: Cubietech Cubietruck [ 0.000000] Memory policy: Data cache writealloc [ 0.000000] efi: UEFI not found. [ 0.000000] Reserved memory: created CMA memory pool at 0x0000000048600000, size 96 MiB [ 0.000000] OF: reserved mem: initialized node default-pool, compatible id shared-dma-pool [ 0.000000] Zone ranges: [ 0.000000] DMA [mem 0x0000000040000000-0x000000006fffffff] [ 0.000000] Normal empty [ 0.000000] HighMem [mem 0x0000000070000000-0x00000000bfffffff] [ 0.000000] Movable zone start for each node [ 0.000000] Early memory node ranges [ 0.000000] node 0: [mem 0x0000000040000000-0x00000000bfffffff] [ 0.000000] Initmem setup node 0 [mem 0x0000000040000000-0x00000000bfffffff] [ 0.000000] psci: probing for conduit method from DT. [ 0.000000] psci: Using PSCI v0.1 Function IDs from DT [ 0.000000] percpu: Embedded 18 pages/cpu s44756 r8192 d20780 u73728 [ 0.000000] pcpu-alloc: s44756 r8192 d20780 u73728 alloc=18*4096 [ 0.000000] pcpu-alloc: [0] 0 [0] 1 [ 0.000000] Built 1 zonelists, mobility grouping on. Total pages: 522560 [ 0.000000] Kernel command line: ro root=/dev/mapper/cubietruck--metzinger--vg-root console=ttyS0,115200n8 [ 0.000000] Dentry cache hash table entries: 131072 (order: 7, 524288 bytes, linear) [ 0.000000] Inode-cache hash table entries: 65536 (order: 6, 262144 bytes, linear) [ 0.000000] mem auto-init: stack:all(zero), heap alloc:on, heap free:off [ 0.000000] Memory: 1933500K/2097152K available (12288K kernel code, 1714K rwdata, 3748K rodata, 2048K init, 382K bss, 65348K reserved, 98304K cma-reserved, 1310720K highmem) [ 0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=2, Nodes=1 [ 0.000000] ftrace: allocating 39974 entries in 118 pages [ 0.000000] ftrace: allocated 118 pages with 5 groups [ 0.000000] trace event string verifier disabled [ 0.000000] rcu: Hierarchical RCU implementation. [ 0.000000] rcu: RCU restricting CPUs from NR_CPUS=8 to nr_cpu_ids=2. [ 0.000000] Rude variant of Tasks RCU enabled. [ 0.000000] Tracing variant of Tasks RCU enabled. [ 0.000000] rcu: RCU calculated value of scheduler-enlistment delay is 25 jiffies. [ 0.000000] rcu: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=2 [ 0.000000] NR_IRQS: 16, nr_irqs: 16, preallocated irqs: 16 [ 0.000000] GIC: Using split EOI/Deactivate mode [ 0.000000] rcu: srcu_init: Setting srcu_struct sizes based on contention. [ 0.000000] arch_timer: cp15 timer(s) running at 24.00MHz (phys). [ 0.000000] clocksource: arch_sys_counter: mask: 0xffffffffffffff max_cycles: 0x588fe9dc0, max_idle_ns: 440795202592 ns [ 0.000002] sched_clock: 56 bits at 24MHz, resolution 41ns, wraps every 4398046511097ns [ 0.000017] Switching to timer-based delay loop, resolution 41ns [ 0.001576] clocksource: timer: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 79635851949 ns [ 0.002625] Can't get timer clock [ 0.003523] Console: colour dummy device 80x30 [ 0.003612] Calibrating delay loop (skipped), value calculated using timer frequency.. 48.00 BogoMIPS (lpj=96000) [ 0.003636] CPU: Testing write buffer coherency: ok [ 0.003709] pid_max: default: 32768 minimum: 301 [ 0.004270] LSM: Security Framework initializing [ 0.004377] landlock: Up and running. [ 0.004382] Yama: disabled by default; enable with sysctl kernel.yama.* [ 0.004671] AppArmor: AppArmor initialized [ 0.004687] TOMOYO Linux initialized [ 0.004731] LSM support for eBPF active [ 0.005080] Mount-cache hash table entries: 2048 (order: 1, 8192 bytes, linear) [ 0.005108] Mountpoint-cache hash table entries: 2048 (order: 1, 8192 bytes, linear) [ 0.007611] /cpus/cpu@0 missing clock-frequency property [ 0.007664] /cpus/cpu@1 missing clock-frequency property [ 0.007677] CPU0: thread -1, cpu 0, socket 0, mpidr 80000000 [ 0.009188] cblist_init_generic: Setting adjustable number of callback queues. [ 0.009207] cblist_init_generic: Setting shift to 1 and lim to 1. [ 0.009392] cblist_init_generic: Setting adjustable number of callback queues. [ 0.009400] cblist_init_generic: Setting shift to 1 and lim to 1. [ 0.009658] Setting up static identity map for 0x40400000 - 0x404000ac [ 0.010937] rcu: Hierarchical SRCU implementation. [ 0.010950] rcu: Max phase no-delay instances is 1000. [ 0.013510] EFI services will not be available. [ 0.014334] smp: Bringing up secondary CPUs ... [ 0.015719] CPU1: thread -1, cpu 1, socket 0, mpidr 80000001 [ 0.015960] smp: Brought up 1 node, 2 CPUs [ 0.015976] SMP: Total of 2 processors activated (96.00 BogoMIPS). [ 0.015987] CPU: All CPU(s) started in HYP mode. [ 0.015991] CPU: Virtualization extensions available. [ 0.018116] devtmpfs: initialized [ 0.027535] VFP support v0.3: implementor 41 architecture 2 part 30 variant 7 rev 4 [ 0.027943] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645041785100000 ns [ 0.027996] futex hash table entries: 512 (order: 3, 32768 bytes, linear) [ 0.033393] pinctrl core: initialized pinctrl subsystem [ 0.034744] DMI not present or invalid. [ 0.035831] NET: Registered PF_NETLINK/PF_ROUTE protocol family [ 0.038032] DMA: preallocated 256 KiB pool for atomic coherent allocations [ 0.039345] audit: initializing netlink subsys (disabled) [ 0.039903] audit: type=2000 audit(0.036:1): state=initialized audit_enabled=0 res=1 [ 0.041679] thermal_sys: Registered thermal governor 'fair_share' [ 0.041695] thermal_sys: Registered thermal governor 'bang_bang' [ 0.041700] thermal_sys: Registered thermal governor 'step_wise' [ 0.041705] thermal_sys: Registered thermal governor 'user_space' [ 0.041710] thermal_sys: Registered thermal governor 'power_allocator' [ 0.041963] No ATAGs? [ 0.042125] hw-breakpoint: found 5 (+1 reserved) breakpoint and 4 watchpoint registers. [ 0.042141] hw-breakpoint: maximum watchpoint size is 8 bytes. [ 0.043638] Serial: AMBA PL011 UART driver [ 0.051865] platform 1c0c000.lcd-controller: Fixed dependency cycle(s) with /soc/hdmi@1c16000 [ 0.051951] platform 1c0c000.lcd-controller: Fixed dependency cycle(s) with /soc/display-backend@1e40000 [ 0.052020] platform 1c0c000.lcd-controller: Fixed dependency cycle(s) with /soc/display-backend@1e60000 [ 0.052426] platform 1c0d000.lcd-controller: Fixed dependency cycle(s) with /soc/hdmi@1c16000 [ 0.052544] platform 1c0d000.lcd-controller: Fixed dependency cycle(s) with /soc/display-backend@1e40000 [ 0.052611] platform 1c0d000.lcd-controller: Fixed dependency cycle(s) with /soc/display-backend@1e60000 [ 0.055497] platform 1c0d000.lcd-controller: Fixed dependency cycle(s) with /soc/hdmi@1c16000 [ 0.055648] platform 1c0c000.lcd-controller: Fixed dependency cycle(s) with /soc/hdmi@1c16000 [ 0.055855] platform 1c16000.hdmi: Fixed dependency cycle(s) with /soc/lcd-controller@1c0d000 [ 0.056032] platform 1c16000.hdmi: Fixed dependency cycle(s) with /soc/lcd-controller@1c0c000 [ 0.059387] platform 1c20800.pinctrl: Fixed dependency cycle(s) with /soc/pinctrl@1c20800/clk-out-a-pin [ 0.065529] platform 1e00000.display-frontend: Fixed dependency cycle(s) with /soc/display-backend@1e40000 [ 0.065606] platform 1e00000.display-frontend: Fixed dependency cycle(s) with /soc/display-backend@1e60000 [ 0.066012] platform 1e20000.display-frontend: Fixed dependency cycle(s) with /soc/display-backend@1e40000 [ 0.066072] platform 1e20000.display-frontend: Fixed dependency cycle(s) with /soc/display-backend@1e60000 [ 0.066552] platform 1e20000.display-frontend: Fixed dependency cycle(s) with /soc/display-backend@1e40000 [ 0.066697] platform 1e00000.display-frontend: Fixed dependency cycle(s) with /soc/display-backend@1e40000 [ 0.066846] platform 1c0d000.lcd-controller: Fixed dependency cycle(s) with /soc/display-backend@1e40000 [ 0.066962] platform 1c0c000.lcd-controller: Fixed dependency cycle(s) with /soc/display-backend@1e40000 [ 0.067096] platform 1e40000.display-backend: Fixed dependency cycle(s) with /soc/lcd-controller@1c0d000 [ 0.067205] platform 1e40000.display-backend: Fixed dependency cycle(s) with /soc/lcd-controller@1c0c000 [ 0.067333] platform 1e40000.display-backend: Fixed dependency cycle(s) with /soc/display-frontend@1e20000 [ 0.067459] platform 1e40000.display-backend: Fixed dependency cycle(s) with /soc/display-frontend@1e00000 [ 0.067992] platform 1e20000.display-frontend: Fixed dependency cycle(s) with /soc/display-backend@1e60000 [ 0.068138] platform 1e00000.display-frontend: Fixed dependency cycle(s) with /soc/display-backend@1e60000 [ 0.068250] platform 1c0d000.lcd-controller: Fixed dependency cycle(s) with /soc/display-backend@1e60000 [ 0.068419] platform 1c0c000.lcd-controller: Fixed dependency cycle(s) with /soc/display-backend@1e60000 [ 0.068526] platform 1e60000.display-backend: Fixed dependency cycle(s) with /soc/lcd-controller@1c0d000 [ 0.068629] platform 1e60000.display-backend: Fixed dependency cycle(s) with /soc/lcd-controller@1c0c000 [ 0.068864] platform 1e60000.display-backend: Fixed dependency cycle(s) with /soc/display-frontend@1e20000 [ 0.069000] platform 1e60000.display-backend: Fixed dependency cycle(s) with /soc/display-frontend@1e00000 [ 0.072246] platform 1c16000.hdmi: Fixed dependency cycle(s) with /hdmi-connector [ 0.072431] platform hdmi-connector: Fixed dependency cycle(s) with /soc/hdmi@1c16000 [ 0.081338] kprobes: kprobe jump-optimization is enabled. All kprobes are optimized if possible. [ 0.085692] HugeTLB: registered 2.00 MiB page size, pre-allocated 0 pages [ 0.085712] HugeTLB: 0 KiB vmemmap can be freed for a 2.00 MiB page [ 0.094615] iommu: Default domain type: Translated [ 0.094636] iommu: DMA domain TLB invalidation policy: strict mode [ 0.096292] pps_core: LinuxPPS API ver. 1 registered [ 0.096310] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti [ 0.096335] PTP clock support registered [ 0.098641] NetLabel: Initializing [ 0.098660] NetLabel: domain hash size = 128 [ 0.098667] NetLabel: protocols = UNLABELED CIPSOv4 CALIPSO [ 0.098771] NetLabel: unlabeled traffic allowed by default [ 0.099228] vgaarb: loaded [ 0.100522] clocksource: Switched to clocksource arch_sys_counter [ 0.101598] VFS: Disk quotas dquot_6.6.0 [ 0.101789] VFS: Dquot-cache hash table entries: 1024 (order 0, 4096 bytes) [ 0.103369] AppArmor: AppArmor Filesystem Enabled [ 0.137223] NET: Registered PF_INET protocol family [ 0.138095] IP idents hash table entries: 16384 (order: 5, 131072 bytes, linear) [ 0.141478] tcp_listen_portaddr_hash hash table entries: 512 (order: 0, 4096 bytes, linear) [ 0.141674] Table-perturb hash table entries: 65536 (order: 6, 262144 bytes, linear) [ 0.141721] TCP established hash table entries: 8192 (order: 3, 32768 bytes, linear) [ 0.141875] TCP bind hash table entries: 8192 (order: 5, 131072 bytes, linear) [ 0.142238] TCP: Hash tables configured (established 8192 bind 8192) [ 0.142804] MPTCP token hash table entries: 1024 (order: 2, 16384 bytes, linear) [ 0.143047] UDP hash table entries: 512 (order: 2, 16384 bytes, linear) [ 0.143119] UDP-Lite hash table entries: 512 (order: 2, 16384 bytes, linear) [ 0.143603] NET: Registered PF_UNIX/PF_LOCAL protocol family [ 0.143683] NET: Registered PF_XDP protocol family [ 0.143707] PCI: CLS 0 bytes, default 64 [ 0.144708] armv7-pmu pmu: hw perfevents: no interrupt-affinity property, guessing. [ 0.144814] Trying to unpack rootfs image as initramfs... [ 0.156282] hw perfevents: enabled with armv7_cortex_a7 PMU driver, 5 counters available [ 0.216194] Initialise system trusted keyrings [ 0.216347] Key type blacklist registered [ 0.218654] workingset: timestamp_bits=14 max_order=19 bucket_order=5 [ 0.229583] zbud: loaded [ 0.231974] integrity: Platform Keyring initialized [ 0.232063] integrity: Machine keyring initialized [ 0.232077] Key type asymmetric registered [ 0.232088] Asymmetric key parser 'x509' registered [ 3.249919] Freeing initrd memory: 25116K [ 3.294793] alg: self-tests for CTR-KDF (hmac(sha256)) passed [ 3.295326] bounce: pool size: 64 pages [ 3.295659] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 248) [ 3.296086] io scheduler mq-deadline registered [ 3.333982] Serial: 8250/16550 driver, 5 ports, IRQ sharing enabled [ 3.338026] Serial: AMBA driver [ 3.339845] STM32 USART driver initialized [ 3.344286] mousedev: PS/2 mouse device common for all mice [ 3.347641] sunxi-rtc 1c20d00.rtc: registered as rtc0 [ 3.347699] sunxi-rtc 1c20d00.rtc: setting system clock to 2024-06-19T18:38:35 UTC (1718822315) [ 3.351528] ledtrig-cpu: registered to indicate activity on CPUs [ 3.355451] NET: Registered PF_INET6 protocol family [ 3.399028] Segment Routing with IPv6 [ 3.399158] In-situ OAM (IOAM) with IPv6 [ 3.399292] mip6: Mobile IPv6 [ 3.399328] NET: Registered PF_PACKET protocol family [ 3.399686] mpls_gso: MPLS GSO support [ 3.399812] ThumbEE CPU extension supported. [ 3.399830] Registering SWP/SWPB emulation handler [ 3.400715] registered taskstats version 1 [ 3.400775] Loading compiled-in X.509 certificates [ 4.288857] Loaded X.509 cert 'Debian Secure Boot CA: 6ccece7e4c6c0d1f6149f3dd27dfcc5cbb419ea1' [ 4.289040] Loaded X.509 cert 'Debian Secure Boot Signer 2022 - linux: 14011249c2675ea8e5148542202005810584b25f' [ 4.290855] zswap: loaded using pool lzo/zbud [ 4.292092] Key type .fscrypt registered [ 4.292109] Key type fscrypt-provisioning registered [ 4.333650] Key type encrypted registered [ 4.333690] AppArmor: AppArmor sha1 policy hashing enabled [ 4.333774] ima: No TPM chip found, activating TPM-bypass! [ 4.333786] ima: Allocated hash algorithm: sha256 [ 4.333860] ima: No architecture policies found [ 4.334024] evm: Initialising EVM extended attributes: [ 4.334032] evm: security.selinux [ 4.334037] evm: security.SMACK64 (disabled) [ 4.334042] evm: security.SMACK64EXEC (disabled) [ 4.334046] evm: security.SMACK64TRANSMUTE (disabled) [ 4.334051] evm: security.SMACK64MMAP (disabled) [ 4.334054] evm: security.apparmor [ 4.334058] evm: security.ima [ 4.334062] evm: security.capability [ 4.334066] evm: HMAC attrs: 0x1 [ 5.459631] sun4i-pinctrl 1c20800.pinctrl: supply vcc-pi not found, using dummy regulator [ 5.462433] sun4i-pinctrl 1c20800.pinctrl: initialized sunXi PIO driver [ 5.464233] sun4i-pinctrl 1c20800.pinctrl: supply vcc-pb not found, using dummy regulator [ 5.465307] printk: console [ttyS0] disabled [ 5.485573] 1c28000.serial: ttyS0 at MMIO 0x1c28000 (irq = 69, base_baud = 1500000) is a U6_16550A [ 6.838386] printk: console [ttyS0] enabled [ 6.865484] 1c28800.serial: ttyS1 at MMIO 0x1c28800 (irq = 70, base_baud = 1500000) is a U6_16550A [ 6.874828] serial serial0: tty port ttyS1 registered [ 6.881353] sun4i-pinctrl 1c20800.pinctrl: supply vcc-ph not found, using dummy regulator [ 6.893634] clk: Disabling unused clocks [ 6.908988] Freeing unused kernel image (initmem) memory: 2048K [ 6.917277] Checked W+X mappings: passed, no W+X pages found [ 6.923028] Run /init as init process [ 6.926715] with arguments: [ 6.926727] /init [ 6.926735] with environment: [ 6.926742] HOME=/ [ 6.926749] TERM=linux [ 8.267002] sun4i-pinctrl 1c20800.pinctrl: supply vcc-pf not found, using dummy regulator [ 8.298184] usbcore: registered new interface driver usbfs [ 8.304036] usbcore: registered new interface driver hub [ 8.313045] sunxi-mmc 1c0f000.mmc: Got CD GPIO [ 8.321223] sunxi-mmc 1c12000.mmc: allocated mmc-pwrseq [ 8.333938] usbcore: registered new device driver usb [ 8.351974] sunxi-mmc 1c12000.mmc: initialized, max. request size: 16384 KB [ 8.410211] mmc0: new high speed SDIO card at address 0001 [ 8.413465] sunxi-mmc 1c0f000.mmc: initialized, max. request size: 16384 KB [ 8.470631] mmc1: host does not support reading read-only switch, assuming write-enable [ 8.512890] mmc1: new high speed SDHC card at address 1234 [ 8.520036] SCSI subsystem initialized [ 8.560230] axp20x-i2c 0-0034: AXP20x variant AXP209 found [ 8.606370] mmcblk1: mmc1:1234 SA16G 14.5 GiB [ 8.678179] axp20x-i2c 0-0034: mask_invert=true is deprecated; please switch to unmask_base [ 8.685823] libata version 3.00 loaded. [ 8.696185] ahci-sunxi 1c18000.sata: supply ahci not found, using dummy regulator [ 8.704256] ahci-sunxi 1c18000.sata: supply phy not found, using dummy regulator [ 8.772992] ahci-sunxi 1c18000.sata: controller can't do PMP, turning off CAP_PMP [ 8.780612] ahci-sunxi 1c18000.sata: forcing PORTS_IMPL to 0x1 [ 8.789075] ahci-sunxi 1c18000.sata: AHCI 0001.0100 32 slots 1 ports 3 Gbps 0x1 impl platform mode [ 8.798216] ahci-sunxi 1c18000.sata: flags: ncq sntf pm led clo only pio slum part ccc [ 8.814855] axp20x-i2c 0-0034: AXP20X driver loaded [ 8.841549] sun4i-pinctrl 1c20800.pinctrl: supply vcc-pa not found, using dummy regulator [ 8.860891] scsi host0: ahci-sunxi [ 8.865214] sun7i-dwmac 1c50000.ethernet: IRQ eth_wake_irq not found [ 8.871771] sun7i-dwmac 1c50000.ethernet: IRQ eth_lpi not found [ 8.878789] ata1: SATA max UDMA/133 mmio [mem 0x01c18000-0x01c18fff] port 0x100 irq 114 [ 8.887878] sun7i-dwmac 1c50000.ethernet: PTP uses main clock [ 8.896615] sun7i-dwmac 1c50000.ethernet: no regulator found [ 8.909906] sun7i-dwmac 1c50000.ethernet: Version ID not available [ 8.921038] sun7i-dwmac 1c50000.ethernet: DWMAC1000 [ 8.926144] sun7i-dwmac 1c50000.ethernet: No HW DMA feature register supported [ 8.933490] sun7i-dwmac 1c50000.ethernet: TX Checksum insertion supported [ 8.940350] sun7i-dwmac 1c50000.ethernet: Normal descriptors [ 8.946075] sun7i-dwmac 1c50000.ethernet: Ring mode enabled [ 9.187356] axp20x-gpio axp20x-gpio: DMA mask not set [ 9.203031] ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300) [ 9.211657] axp20x-gpio axp20x-gpio: AXP209 pinctrl and GPIO driver loaded [ 9.213393] ata1.00: ATA-8: HGST HTS545050A7E380, GG2OAC90, max UDMA/133 [ 9.225542] ata1.00: 976773168 sectors, multi 16: LBA48 NCQ (depth 32) [ 9.248448] ata1.00: configured for UDMA/133 [ 9.254103] scsi 0:0:0:0: Direct-Access ATA HGST HTS545050A7 AC90 PQ: 0 ANSI: 5 [ 9.267127] axp20x-usb-power-supply axp20x-usb-power-supply: DMA mask not set [ 9.310677] sun7i-dwmac 1c50000.ethernet enxb64f0ec7bf3f: renamed from eth0 [ 9.442404] sd 0:0:0:0: [sda] 976773168 512-byte logical blocks: (500 GB/466 GiB) [ 9.450009] sd 0:0:0:0: [sda] 4096-byte physical blocks [ 9.455589] sd 0:0:0:0: [sda] Write Protect is off [ 9.460451] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00 [ 9.464784] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 9.474092] sd 0:0:0:0: [sda] Preferred minimum I/O size 4096 bytes [ 9.494511] sda: sda1 sda2 < sda5 > [ 9.500866] sd 0:0:0:0: [sda] Attached SCSI disk [ 10.832527] random: crng init done [ 11.000305] device-mapper: core: CONFIG_IMA_DISABLE_HTABLE is disabled. Duplicate IMA measurements will not be recorded in the IMA log. [ 11.012976] device-mapper: uevent: version 1.0.3 [ 11.020682] device-mapper: ioctl: 4.47.0-ioctl (2022-07-28) initialised: dm-devel@redhat.com [ 11.828382] PM: Image not found (code -22) [ 12.572347] EXT4-fs (dm-0): mounting ext3 file system using the ext4 subsystem [ 12.951502] EXT4-fs (dm-0): mounted filesystem with ordered data mode. Quota mode: none. [ 13.416462] Not activating Mandatory Access Control as /sbin/tomoyo-init does not exist. [ 17.911216] mc: Linux media interface: v0.10 [ 18.189415] videodev: Linux video capture interface: v2.00 [ 18.210298] sd 0:0:0:0: Attached scsi generic sg0 type 0 [ 18.280785] sunxi-wdt 1c20c90.watchdog: Watchdog enabled (timeout=16 sec, nowayout=0) [ 18.420216] Registered IR keymap rc-empty [ 18.424798] rc rc0: sunxi-ir as /devices/platform/soc/1c21800.ir/rc/rc0 [ 18.432041] rc rc0: lirc_dev: driver sunxi-ir registered at minor = 0, raw IR receiver, no transmitter [ 18.443980] input: sunxi-ir as /devices/platform/soc/1c21800.ir/rc/rc0/input0 [ 18.452807] sunxi-ir 1c21800.ir: initialized sunXi IR driver [ 18.499568] axp20x-adc axp20x-adc: DMA mask not set [ 18.546991] axp20x-ac-power-supply axp20x-ac-power-supply: DMA mask not set [ 18.551382] axp20x-battery-power-supply axp20x-battery-power-supply: DMA mask not set [ 18.580922] input: axp20x-pek as /devices/platform/soc/1c2ac00.i2c/i2c-0/0-0034/axp20x-pek/input/input1 [ 18.667442] sun4i-ss 1c15000.crypto-engine: no reset control found [ 18.687578] ohci-platform 1c14400.usb: Generic Platform OHCI controller [ 18.709040] ehci-platform 1c1c000.usb: EHCI Host Controller [ 18.715188] sunxi_cedrus: module is from the staging directory, the quality is unknown, you have been warned. [ 18.716828] sun4i-ss 1c15000.crypto-engine: Die ID 0 [ 18.752415] ohci-platform 1c14400.usb: new USB bus registered, assigned bus number 1 [ 18.769796] lima 1c40000.gpu: gp - mali400 version major 1 minor 1 [ 18.777050] ehci-platform 1c1c000.usb: new USB bus registered, assigned bus number 2 [ 18.789074] ehci-platform 1c14000.usb: EHCI Host Controller [ 18.790316] usb_phy_generic usb_phy_generic.0.auto: supply vcc not found, using dummy regulator [ 18.800657] ehci-platform 1c14000.usb: new USB bus registered, assigned bus number 3 [ 18.803899] lima 1c40000.gpu: pp0 - mali400 version major 1 minor 1 [ 18.825366] ohci-platform 1c14400.usb: irq 120, io mem 0x01c14400 [ 18.832172] cedrus 1c0e000.video-codec: Device registered as /dev/video0 [ 18.857938] ehci-platform 1c1c000.usb: irq 121, io mem 0x01c1c000 [ 18.878391] ehci-platform 1c14000.usb: irq 122, io mem 0x01c14000 [ 18.885974] sun4i-drm display-engine: bound 1e00000.display-frontend (ops sun4i_frontend_driver_exit [sun4i_frontend]) [ 18.899277] lima 1c40000.gpu: pp1 - mali400 version major 1 minor 1 [ 18.913107] usb usb1: New USB device found, idVendor=1d6b, idProduct=0001, bcdDevice= 6.01 [ 18.913970] usb_phy_generic usb_phy_generic.0.auto: dummy supplies not allowed for exclusive requests [ 18.921488] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 18.921503] usb usb1: Product: Generic Platform OHCI controller [ 18.921512] usb usb1: Manufacturer: Linux 6.1.0-21-armmp-lpae ohci_hcd [ 18.921520] usb usb1: SerialNumber: 1c14400.usb [ 18.945581] sun4i-drm display-engine: bound 1e20000.display-frontend (ops sun4i_frontend_driver_exit [sun4i_frontend]) [ 18.951449] ehci-platform 1c1c000.usb: USB 2.0 started, EHCI 1.00 [ 18.956749] hub 1-0:1.0: USB hub found [ 18.976431] ehci-platform 1c14000.usb: USB 2.0 started, EHCI 1.00 [ 18.977106] lima 1c40000.gpu: l2 cache 64K, 4-way, 64byte cache line, 64bit external bus [ 19.017583] sun4i-drm display-engine: bound 1e60000.display-backend (ops sun4i_backend_ops [sun4i_backend]) [ 19.028832] lima 1c40000.gpu: bus rate = 300000000 [ 19.033534] cfg80211: Loading compiled-in X.509 certificates for regulatory database [ 19.033839] lima 1c40000.gpu: mod rate = 384000000 [ 19.057592] hub 1-0:1.0: 1 port detected [ 19.072452] musb-hdrc musb-hdrc.1.auto: MUSB HDRC host driver [ 19.084164] [drm] Initialized lima 1.1.0 20191231 for 1c40000.gpu on minor 0 [ 19.090696] cfg80211: Loaded X.509 cert 'benh@debian.org: 577e021cb980e0e820821ba7b54b4961b8b4fadf' [ 19.110837] sun4i-drm display-engine: bound 1e40000.display-backend (ops sun4i_backend_ops [sun4i_backend]) [ 19.154764] cfg80211: Loaded X.509 cert 'romain.perier@gmail.com: 3abbc6ec146e09d1b6016ab9d6cf71dd233f0328' [ 19.169591] cfg80211: Loaded X.509 cert 'sforshee: 00b28ddf47aef9cea7' [ 19.170296] sun4i-drm display-engine: No panel or bridge found... RGB output disabled [ 19.184383] sun4i-drm display-engine: bound 1c0c000.lcd-controller (ops sun4i_tcon_platform_driver_exit [sun4i_tcon]) [ 19.186728] cfg80211: Loaded X.509 cert 'wens: 61c038651aabdcf94bd0ac7ff06c7248db18c600' [ 19.263006] platform regulatory.0: firmware: direct-loading firmware regulatory.db [ 19.287067] platform regulatory.0: firmware: direct-loading firmware regulatory.db.p7s [ 19.361435] sun4i-drm display-engine: No panel or bridge found... RGB output disabled [ 19.369588] sun4i-drm display-engine: bound 1c0d000.lcd-controller (ops sun4i_tcon_platform_driver_exit [sun4i_tcon]) [ 19.443941] Registered IR keymap rc-cec [ 19.448609] cryptd: max_cpu_qlen set to 1000 [ 19.457042] rc rc1: sun4i as /devices/platform/soc/1c16000.hdmi/rc/rc1 [ 19.477825] input: sun4i as /devices/platform/soc/1c16000.hdmi/rc/rc1/input2 [ 19.495909] sun4i-drm display-engine: bound 1c16000.hdmi (ops sun4i_hdmi_driver_exit [sun4i_drm_hdmi]) [ 19.534209] [drm] Initialized sun4i-drm 1.0.0 20150629 for display-engine on minor 1 [ 19.562477] sun4i-drm display-engine: [drm] Cannot find any crtc or sizes [ 19.582180] sun4i-drm display-engine: [drm] Cannot find any crtc or sizes [ 19.592129] usb usb3: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 6.01 [ 19.600681] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 19.608006] usb usb3: Product: EHCI Host Controller [ 19.612928] usb usb3: Manufacturer: Linux 6.1.0-21-armmp-lpae ehci_hcd [ 19.619541] usb usb3: SerialNumber: 1c14000.usb [ 19.703733] hub 3-0:1.0: USB hub found [ 19.716124] hub 3-0:1.0: 1 port detected [ 19.733040] usb usb2: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 6.01 [ 19.741638] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 19.748974] usb usb2: Product: EHCI Host Controller [ 19.753937] usb usb2: Manufacturer: Linux 6.1.0-21-armmp-lpae ehci_hcd [ 19.760553] usb usb2: SerialNumber: 1c1c000.usb [ 19.790543] hub 2-0:1.0: USB hub found [ 19.808369] hub 2-0:1.0: 1 port detected [ 19.817468] musb-hdrc musb-hdrc.1.auto: new USB bus registered, assigned bus number 4 [ 19.827031] usb usb4: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 6.01 [ 19.835545] usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 19.842902] usb usb4: Product: MUSB HDRC host driver [ 19.847986] usb usb4: Manufacturer: Linux 6.1.0-21-armmp-lpae musb-hcd [ 19.854668] usb usb4: SerialNumber: musb-hdrc.1.auto [ 19.961080] hub 4-0:1.0: USB hub found [ 20.000834] hub 4-0:1.0: 1 port detected [ 20.036227] ohci-platform 1c1c400.usb: Generic Platform OHCI controller [ 20.054284] ohci-platform 1c1c400.usb: new USB bus registered, assigned bus number 5 [ 20.085157] brcmfmac: brcmf_fw_alloc_request: using brcm/brcmfmac43362-sdio for chip BCM43362/1 [ 20.095149] brcmfmac mmc0:0001:1: firmware: failed to load brcm/brcmfmac43362-sdio.cubietech,cubietruck.bin (-2) [ 20.100985] ohci-platform 1c1c400.usb: irq 134, io mem 0x01c1c400 [ 20.105633] firmware_class: See https://wiki.debian.org/Firmware for information about missing firmware [ 20.121215] brcmfmac mmc0:0001:1: firmware: failed to load brcm/brcmfmac43362-sdio.cubietech,cubietruck.bin (-2) [ 20.121593] usbcore: registered new interface driver brcmfmac [ 20.131572] brcmfmac mmc0:0001:1: Direct firmware load for brcm/brcmfmac43362-sdio.cubietech,cubietruck.bin failed with error -2 [ 20.152735] brcmfmac mmc0:0001:1: firmware: failed to load brcm/brcmfmac43362-sdio.bin (-2) [ 20.161772] brcmfmac mmc0:0001:1: firmware: failed to load brcm/brcmfmac43362-sdio.bin (-2) [ 20.170281] brcmfmac mmc0:0001:1: Direct firmware load for brcm/brcmfmac43362-sdio.bin failed with error -2 [ 20.173004] usb usb5: New USB device found, idVendor=1d6b, idProduct=0001, bcdDevice= 6.01 [ 20.188687] usb usb5: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 20.196049] usb usb5: Product: Generic Platform OHCI controller [ 20.202063] usb usb5: Manufacturer: Linux 6.1.0-21-armmp-lpae ohci_hcd [ 20.208663] usb usb5: SerialNumber: 1c1c400.usb [ 20.217765] hub 5-0:1.0: USB hub found [ 20.221789] hub 5-0:1.0: 1 port detected [ 21.200614] brcmfmac: brcmf_sdio_htclk: HT Avail timeout (1000000): clkctl 0x50 [ 21.477689] Bluetooth: Core ver 2.22 [ 21.481622] NET: Registered PF_BLUETOOTH protocol family [ 21.487059] Bluetooth: HCI device and connection manager initialized [ 21.493501] Bluetooth: HCI socket layer initialized [ 21.498424] Bluetooth: L2CAP socket layer initialized [ 21.503560] Bluetooth: SCO socket layer initialized [ 21.602299] Bluetooth: HCI UART driver ver 2.3 [ 21.606985] Bluetooth: HCI UART protocol H4 registered [ 21.612431] Bluetooth: HCI UART protocol LL registered [ 21.617649] Bluetooth: HCI UART protocol ATH3K registered [ 21.624622] Bluetooth: HCI UART protocol Three-wire (H5) registered [ 21.632708] Bluetooth: HCI UART protocol Intel registered [ 21.640309] hci_uart_bcm serial0-0: supply vbat not found, using dummy regulator [ 21.642811] Bluetooth: HCI UART protocol Broadcom registered [ 21.648192] hci_uart_bcm serial0-0: supply vddio not found, using dummy regulator [ 21.656740] Bluetooth: HCI UART protocol QCA registered [ 21.666362] Bluetooth: HCI UART protocol AG6XX registered [ 21.672828] Bluetooth: HCI UART protocol Marvell registered [ 22.057178] Bluetooth: hci0: BCM: chip id 63 [ 22.062489] Bluetooth: hci0: BCM: features 0x07 [ 22.070297] Bluetooth: hci0: BCM20702A [ 22.074200] Bluetooth: hci0: BCM20702A1 (001.002.014) build 0000 [ 22.081441] bluetooth hci0: firmware: failed to load brcm/BCM20702A1.cubietech,cubietruck.hcd (-2) [ 22.091242] bluetooth hci0: firmware: failed to load brcm/BCM20702A1.cubietech,cubietruck.hcd (-2) [ 22.101389] bluetooth hci0: firmware: failed to load brcm/BCM20702A1.hcd (-2) [ 22.109711] bluetooth hci0: firmware: failed to load brcm/BCM20702A1.hcd (-2) [ 22.118368] bluetooth hci0: firmware: failed to load brcm/BCM.cubietech,cubietruck.hcd (-2) [ 22.127950] bluetooth hci0: firmware: failed to load brcm/BCM.cubietech,cubietruck.hcd (-2) [ 22.137109] bluetooth hci0: firmware: failed to load brcm/BCM.hcd (-2) [ 22.144832] bluetooth hci0: firmware: failed to load brcm/BCM.hcd (-2) [ 22.152305] Bluetooth: hci0: BCM: firmware Patch file not found, tried: [ 22.159114] Bluetooth: hci0: BCM: 'brcm/BCM20702A1.cubietech,cubietruck.hcd' [ 22.166318] Bluetooth: hci0: BCM: 'brcm/BCM20702A1.hcd' [ 22.171721] Bluetooth: hci0: BCM: 'brcm/BCM.cubietech,cubietruck.hcd' [ 22.178282] Bluetooth: hci0: BCM: 'brcm/BCM.hcd' [ 23.186401] EXT4-fs (dm-0): re-mounted. Quota mode: none. [ 26.410445] EXT4-fs (sda1): mounting ext3 file system using the ext4 subsystem [ 26.475645] EXT4-fs (sda1): mounted filesystem with ordered data mode. Quota mode: none. [ 26.919118] Adding 1949692k swap on /dev/mapper/cubietruck--metzinger--vg-swap_1. Priority:-2 extents:1 across:1949692k FS [ 29.845659] sun7i-dwmac 1c50000.ethernet enxb64f0ec7bf3f: Register MEM_TYPE_PAGE_POOL RxQ-0 [ 29.865892] sun7i-dwmac 1c50000.ethernet enxb64f0ec7bf3f: PHY [stmmac-0:01] driver [RTL8211E Gigabit Ethernet] (irq=POLL) [ 29.877111] audit: type=1400 audit(1718822342.072:2): apparmor="STATUS" operation="profile_load" profile="unconfined" name="nvidia_modprobe" pid=981 comm="apparmor_parser" [ 29.894249] sun7i-dwmac 1c50000.ethernet enxb64f0ec7bf3f: No Safety Features support found [ 29.902769] sun7i-dwmac 1c50000.ethernet enxb64f0ec7bf3f: RX IPC Checksum Offload disabled [ 29.911234] sun7i-dwmac 1c50000.ethernet enxb64f0ec7bf3f: No MAC Management Counters available [ 29.913606] audit: type=1400 audit(1718822342.084:3): apparmor="STATUS" operation="profile_load" profile="unconfined" name="nvidia_modprobe//kmod" pid=981 comm="apparmor_parser" [ 29.919935] sun7i-dwmac 1c50000.ethernet enxb64f0ec7bf3f: PTP not supported by HW [ 29.956746] sun7i-dwmac 1c50000.ethernet enxb64f0ec7bf3f: configuring for phy/rgmii-id link mode [ 30.004818] audit: type=1400 audit(1718822342.212:4): apparmor="STATUS" operation="profile_load" profile="unconfined" name="lsb_release" pid=980 comm="apparmor_parser" [ 31.056853] audit: type=1400 audit(1718822343.264:5): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/bin/man" pid=1050 comm="apparmor_parser" [ 31.085204] audit: type=1400 audit(1718822343.284:6): apparmor="STATUS" operation="profile_load" profile="unconfined" name="man_filter" pid=1050 comm="apparmor_parser" [ 31.104707] audit: type=1400 audit(1718822343.308:7): apparmor="STATUS" operation="profile_load" profile="unconfined" name="man_groff" pid=1050 comm="apparmor_parser" [ 32.182807] audit: type=1400 audit(1718822344.388:8): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=1044 comm="apparmor_parser" [ 32.216606] audit: type=1400 audit(1718822344.400:9): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/NetworkManager/nm-dhcp-helper" pid=1044 comm="apparmor_parser" [ 32.234192] audit: type=1400 audit(1718822344.408:10): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/connman/scripts/dhclient-script" pid=1044 comm="apparmor_parser" [ 32.252015] audit: type=1400 audit(1718822344.428:11): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/{,usr/}sbin/dhclient" pid=1044 comm="apparmor_parser" [ 34.054664] sun7i-dwmac 1c50000.ethernet enxb64f0ec7bf3f: Link is Up - 1Gbps/Full - flow control off [ 34.064309] IPv6: ADDRCONF(NETDEV_CHANGE): enxb64f0ec7bf3f: link becomes ready