[ 0.000000] microcode: microcode updated early to revision 0x42e, date = 2019-03-14 [ 0.000000] Linux version 6.1.0-21-amd64 (debian-kernel@lists.debian.org) (gcc-12 (Debian 12.2.0-14) 12.2.0, GNU ld (GNU Binutils for Debian) 2.40) #1 SMP PREEMPT_DYNAMIC Debian 6.1.90-1 (2024-05-03) [ 0.000000] Command line: BOOT_IMAGE=/vmlinuz-6.1.0-21-amd64 root=/dev/mapper/fiano1--vg-root ro console=ttyS0,115200n8 [ 0.000000] BIOS-provided physical RAM map: [ 0.000000] BIOS-e820: [mem 0x0000000000000000-0x000000000009abff] usable [ 0.000000] BIOS-e820: [mem 0x000000000009ac00-0x000000000009ffff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000000e0000-0x00000000000fffff] reserved [ 0.000000] BIOS-e820: [mem 0x0000000000100000-0x000000007de2bfff] usable [ 0.000000] BIOS-e820: [mem 0x000000007de2c000-0x000000007debafff] reserved [ 0.000000] BIOS-e820: [mem 0x000000007debb000-0x000000007dfc3fff] ACPI data [ 0.000000] BIOS-e820: [mem 0x000000007dfc4000-0x000000007e1e0fff] ACPI NVS [ 0.000000] BIOS-e820: [mem 0x000000007e1e1000-0x000000007f36afff] reserved [ 0.000000] BIOS-e820: [mem 0x000000007f36b000-0x000000007f7fffff] ACPI NVS [ 0.000000] BIOS-e820: [mem 0x0000000080000000-0x000000008fffffff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000fed1c000-0x00000000fed3ffff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000ff000000-0x00000000ffffffff] reserved [ 0.000000] BIOS-e820: [mem 0x0000000100000000-0x000000027fffffff] usable [ 0.000000] NX (Execute Disable) protection: active [ 0.000000] SMBIOS 2.7 present. [ 0.000000] DMI: Supermicro X9DBL-3F/X9DBL-iF/X9DBL-3F/X9DBL-iF, BIOS 3.00 12/06/2013 [ 0.000000] tsc: Fast TSC calibration using PIT [ 0.000000] tsc: Detected 1800.114 MHz processor [ 0.000874] e820: update [mem 0x00000000-0x00000fff] usable ==> reserved [ 0.000878] e820: remove [mem 0x000a0000-0x000fffff] usable [ 0.000889] last_pfn = 0x280000 max_arch_pfn = 0x400000000 [ 0.001028] x86/PAT: Configuration [0-7]: WB WC UC- UC WB WP UC- WT [ 0.001678] e820: update [mem 0x80000000-0xffffffff] usable ==> reserved [ 0.001688] last_pfn = 0x7de2c max_arch_pfn = 0x400000000 [ 0.018710] found SMP MP-table at [mem 0x000fd8e0-0x000fd8ef] [ 0.018736] Using GB pages for direct mapping [ 0.018932] RAMDISK: [mem 0x3329b000-0x35944fff] [ 0.018941] ACPI: Early table checksum verification disabled [ 0.018945] ACPI: RSDP 0x00000000000F04A0 000024 (v02 SUPERM) [ 0.018951] ACPI: XSDT 0x000000007DEF1088 00008C (v01 SUPERM SMCI--MB 00000001 AMI 00010013) [ 0.018960] ACPI: FACP 0x000000007DEFBAB0 0000F4 (v04 SUPERM SMCI--MB 00000001 AMI 00010013) [ 0.018968] ACPI: DSDT 0x000000007DEF11A0 00A910 (v02 SUPERM SMCI--MB 00000000 INTL 20091112) [ 0.018973] ACPI: FACS 0x000000007E1D8080 000040 [ 0.018978] ACPI: APIC 0x000000007DEFBBA8 000090 (v03 00000001 AMI 00010013) [ 0.018983] ACPI: FPDT 0x000000007DEFBC38 000044 (v01 00000001 AMI 00010013) [ 0.018988] ACPI: HPET 0x000000007DEFBC80 000038 (v01 SUPERM SMCI--MB 00000001 AMI. 00000005) [ 0.018993] ACPI: PRAD 0x000000007DEFBCB8 0000BE (v02 PRADID PRADTID 00000001 MSFT 04000000) [ 0.018998] ACPI: SPMI 0x000000007DEFBD78 000040 (v05 A M I OEMSPMI 00000000 AMI. 00000000) [ 0.019003] ACPI: SSDT 0x000000007DEFBDB8 0C7AE8 (v02 INTEL CpuPm 00004000 INTL 20091112) [ 0.019008] ACPI: EINJ 0x000000007DFC38A0 000130 (v01 AMI AMI EINJ 00000000 00000000) [ 0.019014] ACPI: ERST 0x000000007DFC39D0 000230 (v01 AMIER AMI ERST 00000000 00000000) [ 0.019019] ACPI: HEST 0x000000007DFC3C00 0000A8 (v01 AMI AMI HEST 00000000 00000000) [ 0.019024] ACPI: BERT 0x000000007DFC3CA8 000030 (v01 AMI AMI BERT 00000000 00000000) [ 0.019029] ACPI: DMAR 0x000000007DFC3CD8 0000B4 (v01 A M I OEMDMAR 00000001 INTL 00000001) [ 0.019034] ACPI: MCFG 0x000000007DFC3D90 00003C (v01 SUPERM SMCI--MB 00000001 MSFT 00000097) [ 0.019038] ACPI: Reserving FACP table memory at [mem 0x7defbab0-0x7defbba3] [ 0.019040] ACPI: Reserving DSDT table memory at [mem 0x7def11a0-0x7defbaaf] [ 0.019042] ACPI: Reserving FACS table memory at [mem 0x7e1d8080-0x7e1d80bf] [ 0.019043] ACPI: Reserving APIC table memory at [mem 0x7defbba8-0x7defbc37] [ 0.019045] ACPI: Reserving FPDT table memory at [mem 0x7defbc38-0x7defbc7b] [ 0.019046] ACPI: Reserving HPET table memory at [mem 0x7defbc80-0x7defbcb7] [ 0.019047] ACPI: Reserving PRAD table memory at [mem 0x7defbcb8-0x7defbd75] [ 0.019049] ACPI: Reserving SPMI table memory at [mem 0x7defbd78-0x7defbdb7] [ 0.019050] ACPI: Reserving SSDT table memory at [mem 0x7defbdb8-0x7dfc389f] [ 0.019052] ACPI: Reserving EINJ table memory at [mem 0x7dfc38a0-0x7dfc39cf] [ 0.019053] ACPI: Reserving ERST table memory at [mem 0x7dfc39d0-0x7dfc3bff] [ 0.019054] ACPI: Reserving HEST table memory at [mem 0x7dfc3c00-0x7dfc3ca7] [ 0.019056] ACPI: Reserving BERT table memory at [mem 0x7dfc3ca8-0x7dfc3cd7] [ 0.019057] ACPI: Reserving DMAR table memory at [mem 0x7dfc3cd8-0x7dfc3d8b] [ 0.019058] ACPI: Reserving MCFG table memory at [mem 0x7dfc3d90-0x7dfc3dcb] [ 0.019129] No NUMA configuration found [ 0.019130] Faking a node at [mem 0x0000000000000000-0x000000027fffffff] [ 0.019146] NODE_DATA(0) allocated [mem 0x27ffd3000-0x27fffdfff] [ 0.019616] Zone ranges: [ 0.019617] DMA [mem 0x0000000000001000-0x0000000000ffffff] [ 0.019620] DMA32 [mem 0x0000000001000000-0x00000000ffffffff] [ 0.019623] Normal [mem 0x0000000100000000-0x000000027fffffff] [ 0.019625] Device empty [ 0.019626] Movable zone start for each node [ 0.019631] Early memory node ranges [ 0.019631] node 0: [mem 0x0000000000001000-0x0000000000099fff] [ 0.019634] node 0: [mem 0x0000000000100000-0x000000007de2bfff] [ 0.019636] node 0: [mem 0x0000000100000000-0x000000027fffffff] [ 0.019639] Initmem setup node 0 [mem 0x0000000000001000-0x000000027fffffff] [ 0.019647] On node 0, zone DMA: 1 pages in unavailable ranges [ 0.019703] On node 0, zone DMA: 102 pages in unavailable ranges [ 0.027822] On node 0, zone Normal: 8660 pages in unavailable ranges [ 0.028117] ACPI: PM-Timer IO Port: 0x408 [ 0.028129] ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1]) [ 0.028132] ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1]) [ 0.028133] ACPI: LAPIC_NMI (acpi_id[0x02] high edge lint[0x1]) [ 0.028134] ACPI: LAPIC_NMI (acpi_id[0x03] high edge lint[0x1]) [ 0.028147] IOAPIC[0]: apic_id 0, version 32, address 0xfec00000, GSI 0-23 [ 0.028153] IOAPIC[1]: apic_id 2, version 32, address 0xfec01000, GSI 24-47 [ 0.028157] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl) [ 0.028160] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level) [ 0.028167] ACPI: Using ACPI (MADT) for SMP configuration information [ 0.028168] ACPI: HPET id: 0x8086a701 base: 0xfed00000 [ 0.028175] TSC deadline timer available [ 0.028177] smpboot: Allowing 4 CPUs, 0 hotplug CPUs [ 0.028199] PM: hibernation: Registered nosave memory: [mem 0x00000000-0x00000fff] [ 0.028202] PM: hibernation: Registered nosave memory: [mem 0x0009a000-0x0009afff] [ 0.028204] PM: hibernation: Registered nosave memory: [mem 0x0009b000-0x0009ffff] [ 0.028205] PM: hibernation: Registered nosave memory: [mem 0x000a0000-0x000dffff] [ 0.028206] PM: hibernation: Registered nosave memory: [mem 0x000e0000-0x000fffff] [ 0.028208] PM: hibernation: Registered nosave memory: [mem 0x7de2c000-0x7debafff] [ 0.028210] PM: hibernation: Registered nosave memory: [mem 0x7debb000-0x7dfc3fff] [ 0.028211] PM: hibernation: Registered nosave memory: [mem 0x7dfc4000-0x7e1e0fff] [ 0.028212] PM: hibernation: Registered nosave memory: [mem 0x7e1e1000-0x7f36afff] [ 0.028214] PM: hibernation: Registered nosave memory: [mem 0x7f36b000-0x7f7fffff] [ 0.028215] PM: hibernation: Registered nosave memory: [mem 0x7f800000-0x7fffffff] [ 0.028216] PM: hibernation: Registered nosave memory: [mem 0x80000000-0x8fffffff] [ 0.028217] PM: hibernation: Registered nosave memory: [mem 0x90000000-0xfed1bfff] [ 0.028218] PM: hibernation: Registered nosave memory: [mem 0xfed1c000-0xfed3ffff] [ 0.028220] PM: hibernation: Registered nosave memory: [mem 0xfed40000-0xfeffffff] [ 0.028221] PM: hibernation: Registered nosave memory: [mem 0xff000000-0xffffffff] [ 0.028224] [mem 0x90000000-0xfed1bfff] available for PCI devices [ 0.028225] Booting paravirtualized kernel on bare hardware [ 0.028228] clocksource: refined-jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645519600211568 ns [ 0.035673] setup_percpu: NR_CPUS:8192 nr_cpumask_bits:4 nr_cpu_ids:4 nr_node_ids:1 [ 0.036066] percpu: Embedded 61 pages/cpu s212992 r8192 d28672 u524288 [ 0.036075] pcpu-alloc: s212992 r8192 d28672 u524288 alloc=1*2097152 [ 0.036079] pcpu-alloc: [0] 0 1 2 3 [ 0.036120] Fallback order for Node 0: 0 [ 0.036125] Built 1 zonelists, mobility grouping on. Total pages: 2055603 [ 0.036127] Policy zone: Normal [ 0.036129] Kernel command line: BOOT_IMAGE=/vmlinuz-6.1.0-21-amd64 root=/dev/mapper/fiano1--vg-root ro console=ttyS0,115200n8 [ 0.036199] Unknown kernel command line parameters "BOOT_IMAGE=/vmlinuz-6.1.0-21-amd64", will be passed to user space. [ 0.036212] random: crng init done [ 0.037262] Dentry cache hash table entries: 1048576 (order: 11, 8388608 bytes, linear) [ 0.037831] Inode-cache hash table entries: 524288 (order: 10, 4194304 bytes, linear) [ 0.037920] mem auto-init: stack:all(zero), heap alloc:on, heap free:off [ 0.037933] software IO TLB: area num 4. [ 0.079050] Memory: 2033856K/8353556K available (14342K kernel code, 2332K rwdata, 9060K rodata, 2796K init, 17404K bss, 304412K reserved, 0K cma-reserved) [ 0.079265] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1 [ 0.079286] Kernel/User page tables isolation: enabled [ 0.079338] ftrace: allocating 40220 entries in 158 pages [ 0.089676] ftrace: allocated 158 pages with 5 groups [ 0.090625] Dynamic Preempt: voluntary [ 0.090668] rcu: Preemptible hierarchical RCU implementation. [ 0.090669] rcu: RCU restricting CPUs from NR_CPUS=8192 to nr_cpu_ids=4. [ 0.090671] Trampoline variant of Tasks RCU enabled. [ 0.090672] Rude variant of Tasks RCU enabled. [ 0.090672] Tracing variant of Tasks RCU enabled. [ 0.090673] rcu: RCU calculated value of scheduler-enlistment delay is 25 jiffies. [ 0.090675] rcu: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=4 [ 0.098051] NR_IRQS: 524544, nr_irqs: 864, preallocated irqs: 16 [ 0.098251] rcu: srcu_init: Setting srcu_struct sizes based on contention. [ 0.102781] Console: colour VGA+ 80x25 [ 1.027095] printk: console [ttyS0] enabled [ 1.031301] ACPI: Core revision 20220331 [ 1.035953] clocksource: hpet: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 133484882848 ns [ 1.045091] APIC: Switch to symmetric I/O mode setup [ 1.050071] DMAR: Host address width 46 [ 1.053919] DMAR: DRHD base: 0x000000fbffc000 flags: 0x1 [ 1.059245] DMAR: dmar0: reg_base_addr fbffc000 ver 1:0 cap d2078c106f0466 ecap f020de [ 1.067169] DMAR: RMRR base: 0x0000007de91000 end: 0x0000007de9dfff [ 1.073442] DMAR: ATSR flags: 0x0 [ 1.076753] DMAR: RHSA base: 0x000000fbffc000 proximity domain: 0x0 [ 1.083027] DMAR-IR: IOAPIC id 0 under DRHD base 0xfbffc000 IOMMU 0 [ 1.089386] DMAR-IR: IOAPIC id 2 under DRHD base 0xfbffc000 IOMMU 0 [ 1.095738] DMAR-IR: HPET id 0 under DRHD base 0xfbffc000 [ 1.101138] DMAR-IR: Queued invalidation will be enabled to support x2apic and Intr-remapping. [ 1.110272] DMAR-IR: Enabled IRQ remapping in x2apic mode [ 1.115672] x2apic enabled [ 1.118391] Switched APIC routing to cluster x2apic. [ 1.123900] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1 [ 1.149083] clocksource: tsc-early: mask: 0xffffffffffffffff max_cycles: 0x19f2955079b, max_idle_ns: 440795235638 ns [ 1.159597] Calibrating delay loop (skipped), value calculated using timer frequency.. 3600.22 BogoMIPS (lpj=7200456) [ 1.163627] CPU0: Thermal monitoring enabled (TM1) [ 1.167680] process: using mwait in idle threads [ 1.171598] Last level iTLB entries: 4KB 512, 2MB 8, 4MB 8 [ 1.175595] Last level dTLB entries: 4KB 512, 2MB 0, 4MB 0, 1GB 4 [ 1.179597] Spectre V1 : Mitigation: usercopy/swapgs barriers and __user pointer sanitization [ 1.183596] Spectre V2 : Mitigation: Retpolines [ 1.187595] Spectre V2 : Spectre v2 / SpectreRSB mitigation: Filling RSB on context switch [ 1.191595] Spectre V2 : Spectre v2 / SpectreRSB : Filling RSB on VMEXIT [ 1.195595] Spectre V2 : Enabling Restricted Speculation for firmware calls [ 1.199596] Spectre V2 : mitigation: Enabling conditional Indirect Branch Prediction Barrier [ 1.203596] Speculative Store Bypass: Mitigation: Speculative Store Bypass disabled via prctl [ 1.207596] MDS: Mitigation: Clear CPU buffers [ 1.211595] MMIO Stale Data: Unknown: No mitigations [ 1.215601] x86/fpu: Supporting XSAVE feature 0x001: 'x87 floating point registers' [ 1.219595] x86/fpu: Supporting XSAVE feature 0x002: 'SSE registers' [ 1.223595] x86/fpu: Supporting XSAVE feature 0x004: 'AVX registers' [ 1.227595] x86/fpu: xstate_offset[2]: 576, xstate_sizes[2]: 256 [ 1.231595] x86/fpu: Enabled xstate features 0x7, context size is 832 bytes, using 'standard' format. [ 1.260424] Freeing SMP alternatives memory: 36K [ 1.263596] pid_max: default: 32768 minimum: 301 [ 1.267629] LSM: Security Framework initializing [ 1.271614] landlock: Up and running. [ 1.275595] Yama: disabled by default; enable with sysctl kernel.yama.* [ 1.279627] AppArmor: AppArmor initialized [ 1.283597] TOMOYO Linux initialized [ 1.287602] LSM support for eBPF active [ 1.291641] Mount-cache hash table entries: 16384 (order: 5, 131072 bytes, linear) [ 1.295611] Mountpoint-cache hash table entries: 16384 (order: 5, 131072 bytes, linear) [ 1.300217] smpboot: CPU0: Intel(R) Xeon(R) CPU E5-2403 v2 @ 1.80GHz (family: 0x6, model: 0x3e, stepping: 0x4) [ 1.303785] cblist_init_generic: Setting adjustable number of callback queues. [ 1.307596] cblist_init_generic: Setting shift to 2 and lim to 1. [ 1.311627] cblist_init_generic: Setting adjustable number of callback queues. [ 1.315596] cblist_init_generic: Setting shift to 2 and lim to 1. [ 1.319617] cblist_init_generic: Setting adjustable number of callback queues. [ 1.323595] cblist_init_generic: Setting shift to 2 and lim to 1. [ 1.327617] Performance Events: PEBS fmt1+, IvyBridge events, 16-deep LBR, full-width counters, Intel PMU driver. [ 1.331597] ... version: 3 [ 1.335595] ... bit width: 48 [ 1.339595] ... generic registers: 8 [ 1.343595] ... value mask: 0000ffffffffffff [ 1.347595] ... max period: 00007fffffffffff [ 1.351595] ... fixed-purpose events: 3 [ 1.355595] ... event mask: 00000007000000ff [ 1.359828] signal: max sigframe size: 1776 [ 1.363620] Estimated ratio of average max frequency by base frequency (times 1024): 1024 [ 1.367627] rcu: Hierarchical SRCU implementation. [ 1.371596] rcu: Max phase no-delay instances is 1000. [ 1.376272] NMI watchdog: Enabled. Permanently consumes one hw-PMU counter. [ 1.379693] smp: Bringing up secondary CPUs ... [ 1.383743] x86: Booting SMP configuration: [ 1.387601] .... node #0, CPUs: #1 #2 #3 [ 1.402748] smp: Brought up 1 node, 4 CPUs [ 1.407596] smpboot: Max logical packages: 1 [ 1.411595] smpboot: Total of 4 processors activated (14400.91 BogoMIPS) [ 1.435868] node 0 deferred pages initialised in 20ms [ 1.440039] devtmpfs: initialized [ 1.443677] x86/mm: Memory block size: 128MB [ 1.448648] ACPI: PM: Registering ACPI NVS region [mem 0x7dfc4000-0x7e1e0fff] (2215936 bytes) [ 1.451646] ACPI: PM: Registering ACPI NVS region [mem 0x7f36b000-0x7f7fffff] (4804608 bytes) [ 1.455751] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645041785100000 ns [ 1.459609] futex hash table entries: 1024 (order: 4, 65536 bytes, linear) [ 1.463658] pinctrl core: initialized pinctrl subsystem [ 1.468486] NET: Registered PF_NETLINK/PF_ROUTE protocol family [ 1.471879] DMA: preallocated 1024 KiB GFP_KERNEL pool for atomic allocations [ 1.475756] DMA: preallocated 1024 KiB GFP_KERNEL|GFP_DMA pool for atomic allocations [ 1.479754] DMA: preallocated 1024 KiB GFP_KERNEL|GFP_DMA32 pool for atomic allocations [ 1.483605] audit: initializing netlink subsys (disabled) [ 1.487610] audit: type=2000 audit(1718858947.400:1): state=initialized audit_enabled=0 res=1 [ 1.487748] thermal_sys: Registered thermal governor 'fair_share' [ 1.491599] thermal_sys: Registered thermal governor 'bang_bang' [ 1.495596] thermal_sys: Registered thermal governor 'step_wise' [ 1.499595] thermal_sys: Registered thermal governor 'user_space' [ 1.503595] thermal_sys: Registered thermal governor 'power_allocator' [ 1.507613] cpuidle: using governor ladder [ 1.515600] cpuidle: using governor menu [ 1.519572] ACPI FADT declares the system doesn't support PCIe ASPM, so disable it [ 1.519597] acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5 [ 1.523700] PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0x80000000-0x8fffffff] (base 0x80000000) [ 1.527598] PCI: MMCONFIG at [mem 0x80000000-0x8fffffff] reserved in E820 [ 1.531605] pmd_set_huge: Cannot satisfy [mem 0x80000000-0x80200000] with a huge-page mapping due to MTRR override. [ 1.536017] PCI: Using configuration type 1 for base access [ 1.539695] core: PMU erratum BJ122, BV98, HSD29 workaround disabled, HT off [ 1.544937] kprobes: kprobe jump-optimization is enabled. All kprobes are optimized if possible. [ 1.547656] HugeTLB: registered 1.00 GiB page size, pre-allocated 0 pages [ 1.551598] HugeTLB: 16380 KiB vmemmap can be freed for a 1.00 GiB page [ 1.559598] HugeTLB: registered 2.00 MiB page size, pre-allocated 0 pages [ 1.567596] HugeTLB: 28 KiB vmemmap can be freed for a 2.00 MiB page [ 1.571751] ACPI: Added _OSI(Module Device) [ 1.575598] ACPI: Added _OSI(Processor Device) [ 1.579596] ACPI: Added _OSI(3.0 _SCP Extensions) [ 1.587596] ACPI: Added _OSI(Processor Aggregator Device) [ 1.706680] ACPI: 2 ACPI AML tables successfully acquired and loaded [ 1.737184] ACPI: Interpreter enabled [ 1.739618] ACPI: PM: (supports S0 S1 S4 S5) [ 1.743596] ACPI: Using IOAPIC for interrupt routing [ 1.751703] HEST: Table parsing has been initialized. [ 1.755721] GHES: APEI firmware first mode is enabled by WHEA _OSC. [ 1.759600] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug [ 1.771595] PCI: Using E820 reservations for host bridge windows [ 1.776147] ACPI: Enabled 5 GPEs in block 00 to 3F [ 1.783705] ACPI BIOS Error (bug): Could not resolve symbol [\_SB.PRAD], AE_NOT_FOUND (20220331/psargs-330) [ 1.787599] ACPI Error: Aborting method \_GPE._L24 due to previous error (AE_NOT_FOUND) (20220331/psparse-529) [ 1.791599] ACPI Error: AE_NOT_FOUND, while evaluating GPE method [_L24] (20220331/evgpe-511) [ 1.795594] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-fe]) [ 1.799594] acpi PNP0A08:00: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI HPX-Type3] [ 1.807689] acpi PNP0A08:00: _OSC: platform does not support [SHPCHotplug PME AER LTR] [ 1.815750] acpi PNP0A08:00: _OSC: OS now controls [PCIeHotplug PCIeCapability] [ 1.823596] acpi PNP0A08:00: FADT indicates ASPM is unsupported, using BIOS configuration [ 1.831959] PCI host bridge to bus 0000:00 [ 1.835598] pci_bus 0000:00: root bus resource [io 0x0000-0x03af window] [ 1.843596] pci_bus 0000:00: root bus resource [io 0x03e0-0x0cf7 window] [ 1.851596] pci_bus 0000:00: root bus resource [io 0x03b0-0x03df window] [ 1.855595] pci_bus 0000:00: root bus resource [io 0x0d00-0xffff window] [ 1.863596] pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000dffff window] [ 1.871595] pci_bus 0000:00: root bus resource [mem 0xfed08000-0xfed08fff window] [ 1.879595] pci_bus 0000:00: root bus resource [mem 0xfed0e000-0xfed0ffff window] [ 1.887595] pci_bus 0000:00: root bus resource [mem 0x80000000-0xfbffffff window] [ 1.895596] pci_bus 0000:00: root bus resource [bus 00-fe] [ 1.899627] pci 0000:00:00.0: [8086:0e00] type 00 class 0x060000 [ 1.903679] pci 0000:00:00.0: PME# supported from D0 D3hot D3cold [ 1.911721] pci 0000:00:01.0: [8086:0e02] type 01 class 0x060400 [ 1.919695] pci 0000:00:01.0: PME# supported from D0 D3hot D3cold [ 1.923763] pci 0000:00:01.1: [8086:0e03] type 01 class 0x060400 [ 1.931694] pci 0000:00:01.1: PME# supported from D0 D3hot D3cold [ 1.935763] pci 0000:00:03.0: [8086:0e08] type 01 class 0x060400 [ 1.943634] pci 0000:00:03.0: enabling Extended Tags [ 1.947660] pci 0000:00:03.0: PME# supported from D0 D3hot D3cold [ 1.951750] pci 0000:00:04.0: [8086:0e20] type 00 class 0x088000 [ 1.959613] pci 0000:00:04.0: reg 0x10: [mem 0xfbb1c000-0xfbb1ffff 64bit] [ 1.967742] pci 0000:00:04.1: [8086:0e21] type 00 class 0x088000 [ 1.971612] pci 0000:00:04.1: reg 0x10: [mem 0xfbb18000-0xfbb1bfff 64bit] [ 1.979731] pci 0000:00:04.2: [8086:0e22] type 00 class 0x088000 [ 1.987612] pci 0000:00:04.2: reg 0x10: [mem 0xfbb14000-0xfbb17fff 64bit] [ 1.991730] pci 0000:00:04.3: [8086:0e23] type 00 class 0x088000 [ 1.999612] pci 0000:00:04.3: reg 0x10: [mem 0xfbb10000-0xfbb13fff 64bit] [ 2.003732] pci 0000:00:04.4: [8086:0e24] type 00 class 0x088000 [ 2.011612] pci 0000:00:04.4: reg 0x10: [mem 0xfbb0c000-0xfbb0ffff 64bit] [ 2.019730] pci 0000:00:04.5: [8086:0e25] type 00 class 0x088000 [ 2.023612] pci 0000:00:04.5: reg 0x10: [mem 0xfbb08000-0xfbb0bfff 64bit] [ 2.031732] pci 0000:00:04.6: [8086:0e26] type 00 class 0x088000 [ 2.035614] pci 0000:00:04.6: reg 0x10: [mem 0xfbb04000-0xfbb07fff 64bit] [ 2.043731] pci 0000:00:04.7: [8086:0e27] type 00 class 0x088000 [ 2.051612] pci 0000:00:04.7: reg 0x10: [mem 0xfbb00000-0xfbb03fff 64bit] [ 2.055728] pci 0000:00:05.0: [8086:0e28] type 00 class 0x088000 [ 2.063725] pci 0000:00:05.2: [8086:0e2a] type 00 class 0x088000 [ 2.067721] pci 0000:00:05.4: [8086:0e2c] type 00 class 0x080020 [ 2.075607] pci 0000:00:05.4: reg 0x10: [mem 0xfbb25000-0xfbb25fff] [ 2.083745] pci 0000:00:11.0: [8086:1d3e] type 01 class 0x060400 [ 2.087716] pci 0000:00:11.0: PME# supported from D0 D3hot D3cold [ 2.095739] pci 0000:00:16.0: [8086:1d3a] type 00 class 0x078000 [ 2.099615] pci 0000:00:16.0: reg 0x10: [mem 0xfed0e000-0xfed0e00f 64bit] [ 2.107670] pci 0000:00:16.0: PME# supported from D0 D3hot D3cold [ 2.111687] pci 0000:00:16.1: [8086:1d3b] type 00 class 0x078000 [ 2.119615] pci 0000:00:16.1: reg 0x10: [mem 0xfed0f000-0xfed0f00f 64bit] [ 2.127670] pci 0000:00:16.1: PME# supported from D0 D3hot D3cold [ 2.131699] pci 0000:00:1a.0: [8086:1d2d] type 00 class 0x0c0320 [ 2.139612] pci 0000:00:1a.0: reg 0x10: [mem 0xfbb23000-0xfbb233ff] [ 2.143686] pci 0000:00:1a.0: PME# supported from D0 D3hot D3cold [ 2.151701] pci 0000:00:1c.0: [8086:1d10] type 01 class 0x060400 [ 2.155694] pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold [ 2.163626] pci 0000:00:1c.0: Enabling MPC IRBNCE [ 2.167597] pci 0000:00:1c.0: Intel PCH root port ACS workaround enabled [ 2.175699] pci 0000:00:1c.1: [8086:1d12] type 01 class 0x060400 [ 2.179695] pci 0000:00:1c.1: PME# supported from D0 D3hot D3cold [ 2.187620] pci 0000:00:1c.1: Enabling MPC IRBNCE [ 2.191597] pci 0000:00:1c.1: Intel PCH root port ACS workaround enabled [ 2.199724] pci 0000:00:1d.0: [8086:1d26] type 00 class 0x0c0320 [ 2.203612] pci 0000:00:1d.0: reg 0x10: [mem 0xfbb22000-0xfbb223ff] [ 2.211687] pci 0000:00:1d.0: PME# supported from D0 D3hot D3cold [ 2.215700] pci 0000:00:1e.0: [8086:244e] type 01 class 0x060401 [ 2.223741] pci 0000:00:1f.0: [8086:1d41] type 00 class 0x060100 [ 2.227812] pci 0000:00:1f.2: [8086:1d02] type 00 class 0x010601 [ 2.235608] pci 0000:00:1f.2: reg 0x10: [io 0xf050-0xf057] [ 2.239602] pci 0000:00:1f.2: reg 0x14: [io 0xf040-0xf043] [ 2.247602] pci 0000:00:1f.2: reg 0x18: [io 0xf030-0xf037] [ 2.251602] pci 0000:00:1f.2: reg 0x1c: [io 0xf020-0xf023] [ 2.259602] pci 0000:00:1f.2: reg 0x20: [io 0xf000-0xf01f] [ 2.263602] pci 0000:00:1f.2: reg 0x24: [mem 0xfbb21000-0xfbb217ff] [ 2.267639] pci 0000:00:1f.2: PME# supported from D3hot [ 2.275686] pci 0000:00:1f.3: [8086:1d22] type 00 class 0x0c0500 [ 2.279613] pci 0000:00:1f.3: reg 0x10: [mem 0xfbb20000-0xfbb200ff 64bit] [ 2.287619] pci 0000:00:1f.3: reg 0x20: [io 0x1180-0x119f] [ 2.291671] pci 0000:00:1f.6: [8086:1d24] type 00 class 0x118000 [ 2.299616] pci 0000:00:1f.6: reg 0x10: [mem 0xfed08000-0xfed08fff 64bit] [ 2.307758] pci 0000:00:01.0: PCI bridge to [bus 01] [ 2.311647] pci 0000:00:01.1: PCI bridge to [bus 02] [ 2.315646] pci 0000:00:03.0: PCI bridge to [bus 03] [ 2.319678] pci 0000:04:00.0: [8086:1d6b] type 00 class 0x010700 [ 2.327618] pci 0000:04:00.0: reg 0x10: [mem 0xfa47c000-0xfa47ffff 64bit pref] [ 2.335610] pci 0000:04:00.0: reg 0x18: [mem 0xfa000000-0xfa3fffff 64bit pref] [ 2.343604] pci 0000:04:00.0: reg 0x20: [io 0xe000-0xe0ff] [ 2.347621] pci 0000:04:00.0: enabling Extended Tags [ 2.351701] pci 0000:04:00.0: reg 0x164: [mem 0xfa400000-0xfa403fff 64bit pref] [ 2.359596] pci 0000:04:00.0: VF(n) BAR0 space: [mem 0xfa400000-0xfa47bfff 64bit pref] (contains BAR0 for 31 VFs) [ 2.371851] pci 0000:00:11.0: PCI bridge to [bus 04] [ 2.375599] pci 0000:00:11.0: bridge window [io 0xe000-0xefff] [ 2.379603] pci 0000:00:11.0: bridge window [mem 0xfa000000-0xfa4fffff 64bit pref] [ 2.387693] pci 0000:05:00.0: [8086:10d3] type 00 class 0x020000 [ 2.395631] pci 0000:05:00.0: reg 0x10: [mem 0xfba00000-0xfba1ffff] [ 2.399633] pci 0000:05:00.0: reg 0x18: [io 0xd000-0xd01f] [ 2.407614] pci 0000:05:00.0: reg 0x1c: [mem 0xfba20000-0xfba23fff] [ 2.411784] pci 0000:05:00.0: PME# supported from D0 D3hot D3cold [ 2.419819] pci 0000:00:1c.0: PCI bridge to [bus 05] [ 2.423599] pci 0000:00:1c.0: bridge window [io 0xd000-0xdfff] [ 2.431598] pci 0000:00:1c.0: bridge window [mem 0xfba00000-0xfbafffff] [ 2.439697] pci 0000:06:00.0: [8086:10d3] type 00 class 0x020000 [ 2.443631] pci 0000:06:00.0: reg 0x10: [mem 0xfb900000-0xfb91ffff] [ 2.451633] pci 0000:06:00.0: reg 0x18: [io 0xc000-0xc01f] [ 2.455614] pci 0000:06:00.0: reg 0x1c: [mem 0xfb920000-0xfb923fff] [ 2.463780] pci 0000:06:00.0: PME# supported from D0 D3hot D3cold [ 2.467811] pci 0000:00:1c.1: PCI bridge to [bus 06] [ 2.471599] pci 0000:00:1c.1: bridge window [io 0xc000-0xcfff] [ 2.479598] pci 0000:00:1c.1: bridge window [mem 0xfb900000-0xfb9fffff] [ 2.487618] pci_bus 0000:07: extended config space not accessible [ 2.491621] pci 0000:07:01.0: [102b:0532] type 00 class 0x030000 [ 2.499612] pci 0000:07:01.0: reg 0x10: [mem 0xf9000000-0xf9ffffff pref] [ 2.503604] pci 0000:07:01.0: reg 0x14: [mem 0xfb800000-0xfb803fff] [ 2.511604] pci 0000:07:01.0: reg 0x18: [mem 0xfb000000-0xfb7fffff] [ 2.519642] pci 0000:07:01.0: Video device with shadowed ROM at [mem 0x000c0000-0x000dffff] [ 2.527707] pci 0000:00:1e.0: PCI bridge to [bus 07] (subtractive decode) [ 2.531600] pci 0000:00:1e.0: bridge window [mem 0xfb000000-0xfb8fffff] [ 2.539602] pci 0000:00:1e.0: bridge window [mem 0xf9000000-0xf9ffffff 64bit pref] [ 2.547596] pci 0000:00:1e.0: bridge window [io 0x0000-0x03af window] (subtractive decode) [ 2.555596] pci 0000:00:1e.0: bridge window [io 0x03e0-0x0cf7 window] (subtractive decode) [ 2.563596] pci 0000:00:1e.0: bridge window [io 0x03b0-0x03df window] (subtractive decode) [ 2.571596] pci 0000:00:1e.0: bridge window [io 0x0d00-0xffff window] (subtractive decode) [ 2.583595] pci 0000:00:1e.0: bridge window [mem 0x000a0000-0x000dffff window] (subtractive decode) [ 2.591595] pci 0000:00:1e.0: bridge window [mem 0xfed08000-0xfed08fff window] (subtractive decode) [ 2.599595] pci 0000:00:1e.0: bridge window [mem 0xfed0e000-0xfed0ffff window] (subtractive decode) [ 2.607595] pci 0000:00:1e.0: bridge window [mem 0x80000000-0xfbffffff window] (subtractive decode) [ 2.620397] ACPI: PCI Root Bridge [UNC0] (domain 0000 [bus ff]) [ 2.623600] acpi PNP0A03:00: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI HPX-Type3] [ 2.635615] acpi PNP0A03:00: _OSC: OS now controls [PCIeHotplug SHPCHotplug PME AER PCIeCapability LTR] [ 2.643596] acpi PNP0A03:00: FADT indicates ASPM is unsupported, using BIOS configuration [ 2.651664] PCI host bridge to bus 0000:ff [ 2.655597] pci_bus 0000:ff: root bus resource [bus ff] [ 2.659609] pci 0000:ff:08.0: [8086:0e80] type 00 class 0x088000 [ 2.667676] pci 0000:ff:09.0: [8086:0e90] type 00 class 0x088000 [ 2.671664] pci 0000:ff:0a.0: [8086:0ec0] type 00 class 0x088000 [ 2.679655] pci 0000:ff:0a.1: [8086:0ec1] type 00 class 0x088000 [ 2.683655] pci 0000:ff:0a.2: [8086:0ec2] type 00 class 0x088000 [ 2.691661] pci 0000:ff:0a.3: [8086:0ec3] type 00 class 0x088000 [ 2.695662] pci 0000:ff:0b.0: [8086:0e1e] type 00 class 0x088000 [ 2.703653] pci 0000:ff:0b.3: [8086:0e1f] type 00 class 0x088000 [ 2.711654] pci 0000:ff:0c.0: [8086:0ee0] type 00 class 0x088000 [ 2.715655] pci 0000:ff:0c.1: [8086:0ee2] type 00 class 0x088000 [ 2.723656] pci 0000:ff:0d.0: [8086:0ee1] type 00 class 0x088000 [ 2.727653] pci 0000:ff:0d.1: [8086:0ee3] type 00 class 0x088000 [ 2.735656] pci 0000:ff:0e.0: [8086:0ea0] type 00 class 0x088000 [ 2.739658] pci 0000:ff:0e.1: [8086:0e30] type 00 class 0x110100 [ 2.747672] pci 0000:ff:0f.0: [8086:0ea8] type 00 class 0x088000 [ 2.751684] pci 0000:ff:0f.1: [8086:0e71] type 00 class 0x088000 [ 2.759678] pci 0000:ff:0f.2: [8086:0eaa] type 00 class 0x088000 [ 2.763678] pci 0000:ff:0f.3: [8086:0eab] type 00 class 0x088000 [ 2.771677] pci 0000:ff:0f.4: [8086:0eac] type 00 class 0x088000 [ 2.775677] pci 0000:ff:0f.5: [8086:0ead] type 00 class 0x088000 [ 2.783680] pci 0000:ff:10.0: [8086:0eb0] type 00 class 0x088000 [ 2.787678] pci 0000:ff:10.1: [8086:0eb1] type 00 class 0x088000 [ 2.795691] pci 0000:ff:10.2: [8086:0eb2] type 00 class 0x088000 [ 2.799679] pci 0000:ff:10.3: [8086:0eb3] type 00 class 0x088000 [ 2.807677] pci 0000:ff:10.4: [8086:0eb4] type 00 class 0x088000 [ 2.811679] pci 0000:ff:10.5: [8086:0eb5] type 00 class 0x088000 [ 2.819679] pci 0000:ff:10.6: [8086:0eb6] type 00 class 0x088000 [ 2.823678] pci 0000:ff:10.7: [8086:0eb7] type 00 class 0x088000 [ 2.831676] pci 0000:ff:13.0: [8086:0e1d] type 00 class 0x088000 [ 2.835655] pci 0000:ff:13.1: [8086:0e34] type 00 class 0x110100 [ 2.843661] pci 0000:ff:13.4: [8086:0e81] type 00 class 0x088000 [ 2.847656] pci 0000:ff:13.5: [8086:0e36] type 00 class 0x110100 [ 2.855658] pci 0000:ff:16.0: [8086:0ec8] type 00 class 0x088000 [ 2.859654] pci 0000:ff:16.1: [8086:0ec9] type 00 class 0x088000 [ 2.867653] pci 0000:ff:16.2: [8086:0eca] type 00 class 0x088000 [ 2.875816] ACPI: PCI: Interrupt link LNKA configured for IRQ 11 [ 2.879649] ACPI: PCI: Interrupt link LNKB configured for IRQ 10 [ 2.887647] ACPI: PCI: Interrupt link LNKC configured for IRQ 5 [ 2.891647] ACPI: PCI: Interrupt link LNKD configured for IRQ 11 [ 2.899646] ACPI: PCI: Interrupt link LNKE configured for IRQ 0 [ 2.903647] ACPI: PCI: Interrupt link LNKF configured for IRQ 0 [ 2.911684] ACPI: PCI: Interrupt link LNKG configured for IRQ 0 [ 2.915647] ACPI: PCI: Interrupt link LNKH configured for IRQ 7 [ 2.925224] iommu: Default domain type: Translated [ 2.927596] iommu: DMA domain TLB invalidation policy: lazy mode [ 2.935695] pps_core: LinuxPPS API ver. 1 registered [ 2.939596] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti [ 2.947598] PTP clock support registered [ 2.951533] EDAC MC: Ver: 3.0.0 [ 2.955856] NetLabel: Initializing [ 2.959259] NetLabel: domain hash size = 128 [ 2.963598] NetLabel: protocols = UNLABELED CIPSOv4 CALIPSO [ 2.971618] NetLabel: unlabeled traffic allowed by default [ 2.975596] PCI: Using ACPI for IRQ routing [ 2.986541] PCI: pci_cache_line_size set to 64 bytes [ 2.986666] e820: reserve RAM buffer [mem 0x0009ac00-0x0009ffff] [ 2.986669] e820: reserve RAM buffer [mem 0x7de2c000-0x7fffffff] [ 2.987632] pci 0000:07:01.0: vgaarb: setting as boot VGA device [ 2.991594] pci 0000:07:01.0: vgaarb: bridge control possible [ 2.991594] pci 0000:07:01.0: vgaarb: VGA device added: decodes=io+mem,owns=io+mem,locks=none [ 3.007603] vgaarb: loaded [ 3.012133] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0, 0, 0, 0, 0, 0 [ 3.015596] hpet0: 8 comparators, 64-bit 14.318180 MHz counter [ 3.025656] clocksource: Switched to clocksource tsc-early [ 3.029289] VFS: Disk quotas dquot_6.6.0 [ 3.033234] VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes) [ 3.040303] AppArmor: AppArmor Filesystem Enabled [ 3.045035] pnp: PnP ACPI init [ 3.048245] system 00:00: [mem 0xfc000000-0xfcffffff] has been reserved [ 3.054868] system 00:00: [mem 0xfd000000-0xfdffffff] has been reserved [ 3.061482] system 00:00: [mem 0xfe000000-0xfeafffff] has been reserved [ 3.068095] system 00:00: [mem 0xfeb00000-0xfebfffff] has been reserved [ 3.074838] system 00:01: [mem 0xfbffc000-0xfbffdfff] could not be reserved [ 3.081938] system 00:03: [io 0x04d0-0x04d1] has been reserved [ 3.087865] system 00:03: [mem 0x00000400-0x000004ff] could not be reserved [ 3.095144] system 00:06: [io 0x0b00-0x0b7f] has been reserved [ 3.101264] pnp 00:07: [dma 0 disabled] [ 3.101517] pnp 00:08: [dma 0 disabled] [ 3.101800] system 00:09: [io 0x0400-0x0453] has been reserved [ 3.107721] system 00:09: [io 0x0458-0x047f] has been reserved [ 3.113645] system 00:09: [io 0x1180-0x119f] has been reserved [ 3.119563] system 00:09: [io 0x0500-0x057f] has been reserved [ 3.125484] system 00:09: [mem 0xfed1c000-0xfed1ffff] has been reserved [ 3.132095] system 00:09: [mem 0xfec00000-0xfecfffff] could not be reserved [ 3.139054] system 00:09: [mem 0xff000000-0xffffffff] has been reserved [ 3.145771] system 00:0a: [io 0x0454-0x0457] has been reserved [ 3.151968] system 00:0b: [mem 0x00000000-0x0009ffff] could not be reserved [ 3.159201] pnp: PnP ACPI: found 12 devices [ 3.169920] clocksource: acpi_pm: mask: 0xffffff max_cycles: 0xffffff, max_idle_ns: 2085701024 ns [ 3.178890] NET: Registered PF_INET protocol family [ 3.183955] IP idents hash table entries: 131072 (order: 8, 1048576 bytes, linear) [ 3.194291] tcp_listen_portaddr_hash hash table entries: 4096 (order: 4, 65536 bytes, linear) [ 3.202857] Table-perturb hash table entries: 65536 (order: 6, 262144 bytes, linear) [ 3.210688] TCP established hash table entries: 65536 (order: 7, 524288 bytes, linear) [ 3.218985] TCP bind hash table entries: 65536 (order: 9, 2097152 bytes, linear) [ 3.226782] TCP: Hash tables configured (established 65536 bind 65536) [ 3.233409] MPTCP token hash table entries: 8192 (order: 5, 196608 bytes, linear) [ 3.240958] UDP hash table entries: 4096 (order: 5, 131072 bytes, linear) [ 3.247787] UDP-Lite hash table entries: 4096 (order: 5, 131072 bytes, linear) [ 3.255079] NET: Registered PF_UNIX/PF_LOCAL protocol family [ 3.260751] NET: Registered PF_XDP protocol family [ 3.265562] pci 0000:00:01.0: PCI bridge to [bus 01] [ 3.270536] pci 0000:00:01.1: PCI bridge to [bus 02] [ 3.275508] pci 0000:00:03.0: PCI bridge to [bus 03] [ 3.280485] pci 0000:00:11.0: PCI bridge to [bus 04] [ 3.285450] pci 0000:00:11.0: bridge window [io 0xe000-0xefff] [ 3.291549] pci 0000:00:11.0: bridge window [mem 0xfa000000-0xfa4fffff 64bit pref] [ 3.299296] pci 0000:00:1c.0: PCI bridge to [bus 05] [ 3.304267] pci 0000:00:1c.0: bridge window [io 0xd000-0xdfff] [ 3.310357] pci 0000:00:1c.0: bridge window [mem 0xfba00000-0xfbafffff] [ 3.317149] pci 0000:00:1c.1: PCI bridge to [bus 06] [ 3.322117] pci 0000:00:1c.1: bridge window [io 0xc000-0xcfff] [ 3.328211] pci 0000:00:1c.1: bridge window [mem 0xfb900000-0xfb9fffff] [ 3.335001] pci 0000:00:1e.0: PCI bridge to [bus 07] [ 3.339970] pci 0000:00:1e.0: bridge window [mem 0xfb000000-0xfb8fffff] [ 3.346753] pci 0000:00:1e.0: bridge window [mem 0xf9000000-0xf9ffffff 64bit pref] [ 3.354495] pci_bus 0000:00: resource 4 [io 0x0000-0x03af window] [ 3.360669] pci_bus 0000:00: resource 5 [io 0x03e0-0x0cf7 window] [ 3.366849] pci_bus 0000:00: resource 6 [io 0x03b0-0x03df window] [ 3.373028] pci_bus 0000:00: resource 7 [io 0x0d00-0xffff window] [ 3.379206] pci_bus 0000:00: resource 8 [mem 0x000a0000-0x000dffff window] [ 3.386079] pci_bus 0000:00: resource 9 [mem 0xfed08000-0xfed08fff window] [ 3.392952] pci_bus 0000:00: resource 10 [mem 0xfed0e000-0xfed0ffff window] [ 3.399910] pci_bus 0000:00: resource 11 [mem 0x80000000-0xfbffffff window] [ 3.406869] pci_bus 0000:04: resource 0 [io 0xe000-0xefff] [ 3.412441] pci_bus 0000:04: resource 2 [mem 0xfa000000-0xfa4fffff 64bit pref] [ 3.419659] pci_bus 0000:05: resource 0 [io 0xd000-0xdfff] [ 3.425231] pci_bus 0000:05: resource 1 [mem 0xfba00000-0xfbafffff] [ 3.431500] pci_bus 0000:06: resource 0 [io 0xc000-0xcfff] [ 3.437069] pci_bus 0000:06: resource 1 [mem 0xfb900000-0xfb9fffff] [ 3.443337] pci_bus 0000:07: resource 1 [mem 0xfb000000-0xfb8fffff] [ 3.449601] pci_bus 0000:07: resource 2 [mem 0xf9000000-0xf9ffffff 64bit pref] [ 3.456819] pci_bus 0000:07: resource 4 [io 0x0000-0x03af window] [ 3.462998] pci_bus 0000:07: resource 5 [io 0x03e0-0x0cf7 window] [ 3.469177] pci_bus 0000:07: resource 6 [io 0x03b0-0x03df window] [ 3.475356] pci_bus 0000:07: resource 7 [io 0x0d00-0xffff window] [ 3.481535] pci_bus 0000:07: resource 8 [mem 0x000a0000-0x000dffff window] [ 3.488407] pci_bus 0000:07: resource 9 [mem 0xfed08000-0xfed08fff window] [ 3.495279] pci_bus 0000:07: resource 10 [mem 0xfed0e000-0xfed0ffff window] [ 3.502239] pci_bus 0000:07: resource 11 [mem 0x80000000-0xfbffffff window] [ 3.509290] pci 0000:00:05.0: disabled boot interrupts on device [8086:0e28] [ 3.537428] pci 0000:00:1a.0: quirk_usb_early_handoff+0x0/0x750 took 20575 usecs [ 3.565412] pci 0000:00:1d.0: quirk_usb_early_handoff+0x0/0x750 took 20090 usecs [ 3.572915] PCI: CLS 64 bytes, default 64 [ 3.576959] DMAR: No SATC found [ 3.577000] Trying to unpack rootfs image as initramfs... [ 3.580105] DMAR: dmar0: Using Queued invalidation [ 3.580182] pci 0000:00:00.0: Adding to iommu group 0 [ 3.595409] pci 0000:00:01.0: Adding to iommu group 1 [ 3.600487] pci 0000:00:01.1: Adding to iommu group 2 [ 3.605569] pci 0000:00:03.0: Adding to iommu group 3 [ 3.610654] pci 0000:00:04.0: Adding to iommu group 4 [ 3.615730] pci 0000:00:04.1: Adding to iommu group 5 [ 3.620815] pci 0000:00:04.2: Adding to iommu group 6 [ 3.625898] pci 0000:00:04.3: Adding to iommu group 7 [ 3.630977] pci 0000:00:04.4: Adding to iommu group 8 [ 3.636054] pci 0000:00:04.5: Adding to iommu group 9 [ 3.641135] pci 0000:00:04.6: Adding to iommu group 10 [ 3.646303] pci 0000:00:04.7: Adding to iommu group 11 [ 3.651471] pci 0000:00:05.0: Adding to iommu group 12 [ 3.656636] pci 0000:00:05.2: Adding to iommu group 13 [ 3.661802] pci 0000:00:05.4: Adding to iommu group 14 [ 3.666966] pci 0000:00:11.0: Adding to iommu group 15 [ 3.672153] pci 0000:00:16.0: Adding to iommu group 16 [ 3.677330] pci 0000:00:16.1: Adding to iommu group 16 [ 3.682504] pci 0000:00:1a.0: Adding to iommu group 17 [ 3.687668] pci 0000:00:1c.0: Adding to iommu group 18 [ 3.692837] pci 0000:00:1c.1: Adding to iommu group 19 [ 3.698006] pci 0000:00:1d.0: Adding to iommu group 20 [ 3.703174] pci 0000:00:1e.0: Adding to iommu group 21 [ 3.708389] pci 0000:00:1f.0: Adding to iommu group 22 [ 3.713555] pci 0000:00:1f.2: Adding to iommu group 22 [ 3.718719] pci 0000:00:1f.3: Adding to iommu group 22 [ 3.723886] pci 0000:00:1f.6: Adding to iommu group 22 [ 3.729059] pci 0000:04:00.0: Adding to iommu group 23 [ 3.734224] pci 0000:05:00.0: Adding to iommu group 24 [ 3.739388] pci 0000:06:00.0: Adding to iommu group 25 [ 3.744534] pci 0000:07:01.0: Adding to iommu group 21 [ 3.749721] pci 0000:ff:08.0: Adding to iommu group 26 [ 3.754901] pci 0000:ff:09.0: Adding to iommu group 27 [ 3.760109] pci 0000:ff:0a.0: Adding to iommu group 28 [ 3.765275] pci 0000:ff:0a.1: Adding to iommu group 28 [ 3.770441] pci 0000:ff:0a.2: Adding to iommu group 28 [ 3.775618] pci 0000:ff:0a.3: Adding to iommu group 28 [ 3.780810] pci 0000:ff:0b.0: Adding to iommu group 29 [ 3.785982] pci 0000:ff:0b.3: Adding to iommu group 29 [ 3.791176] pci 0000:ff:0c.0: Adding to iommu group 30 [ 3.796342] pci 0000:ff:0c.1: Adding to iommu group 30 [ 3.801536] pci 0000:ff:0d.0: Adding to iommu group 31 [ 3.806709] pci 0000:ff:0d.1: Adding to iommu group 31 [ 3.811902] pci 0000:ff:0e.0: Adding to iommu group 32 [ 3.817079] pci 0000:ff:0e.1: Adding to iommu group 32 [ 3.822245] pci 0000:ff:0f.0: Adding to iommu group 33 [ 3.827413] pci 0000:ff:0f.1: Adding to iommu group 34 [ 3.832582] pci 0000:ff:0f.2: Adding to iommu group 35 [ 3.837750] pci 0000:ff:0f.3: Adding to iommu group 36 [ 3.842923] pci 0000:ff:0f.4: Adding to iommu group 37 [ 3.848089] pci 0000:ff:0f.5: Adding to iommu group 38 [ 3.853251] pci 0000:ff:10.0: Adding to iommu group 39 [ 3.858420] pci 0000:ff:10.1: Adding to iommu group 40 [ 3.863589] pci 0000:ff:10.2: Adding to iommu group 41 [ 3.868755] pci 0000:ff:10.3: Adding to iommu group 42 [ 3.873920] pci 0000:ff:10.4: Adding to iommu group 43 [ 3.879087] pci 0000:ff:10.5: Adding to iommu group 44 [ 3.884248] pci 0000:ff:10.6: Adding to iommu group 45 [ 3.889415] pci 0000:ff:10.7: Adding to iommu group 46 [ 3.894624] pci 0000:ff:13.0: Adding to iommu group 47 [ 3.899800] pci 0000:ff:13.1: Adding to iommu group 47 [ 3.904977] pci 0000:ff:13.4: Adding to iommu group 47 [ 3.910164] pci 0000:ff:13.5: Adding to iommu group 47 [ 3.915373] pci 0000:ff:16.0: Adding to iommu group 48 [ 3.920551] pci 0000:ff:16.1: Adding to iommu group 48 [ 3.925723] pci 0000:ff:16.2: Adding to iommu group 48 [ 3.934735] DMAR: Intel(R) Virtualization Technology for Directed I/O [ 3.941184] PCI-DMA: Using software bounce buffering for IO (SWIOTLB) [ 3.947623] software IO TLB: mapped [mem 0x0000000079e2c000-0x000000007de2c000] (64MB) [ 3.956100] Initialise system trusted keyrings [ 3.960561] Key type blacklist registered [ 3.964653] workingset: timestamp_bits=36 max_order=21 bucket_order=0 [ 3.972952] zbud: loaded [ 3.975816] integrity: Platform Keyring initialized [ 3.980707] integrity: Machine keyring initialized [ 3.985497] Key type asymmetric registered [ 3.989595] Asymmetric key parser 'x509' registered [ 4.020962] Freeing initrd memory: 39592K [ 4.032175] alg: self-tests for CTR-KDF (hmac(sha256)) passed [ 4.037963] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 248) [ 4.045404] io scheduler mq-deadline registered [ 4.052365] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4 [ 4.059185] Monitor-Mwait will be used to enter C-1 state [ 4.059199] Monitor-Mwait will be used to enter C-2 state [ 4.059205] ACPI: \_SB_.SCK0.C000: Found 2 idle states [ 4.069213] ERST: Error Record Serialization Table (ERST) support is initialized. [ 4.076706] pstore: Registered erst as persistent store backend [ 4.082760] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled [ 4.089206] 00:07: ttyS0 at I/O 0x3f8 (irq = 4, base_baud = 115200) is a 16550A [ 4.097304] 00:08: ttyS1 at I/O 0x2f8 (irq = 3, base_baud = 115200) is a 16550A [ 4.105538] Linux agpgart interface v0.103 [ 4.109764] AMD-Vi: AMD IOMMUv2 functionality not available on this system - This is not a bug. [ 4.118900] i8042: PNP: PS/2 Controller [PNP0f03:PS2M] at 0x60,0x64 irq 12 [ 4.125777] i8042: PNP: PS/2 controller doesn't have KBD irq; using default 1 [ 4.135418] serio: i8042 KBD port at 0x60,0x64 irq 1 [ 4.140391] serio: i8042 AUX port at 0x60,0x64 irq 12 [ 4.145634] mousedev: PS/2 mouse device common for all mice [ 4.151246] rtc_cmos 00:02: RTC can wake from S4 [ 4.156169] rtc_cmos 00:02: registered as rtc0 [ 4.160654] rtc_cmos 00:02: setting system clock to 2024-06-20T04:49:11 UTC (1718858951) [ 4.168779] rtc_cmos 00:02: alarms up to one month, y3k, 114 bytes nvram, hpet irqs [ 4.176602] intel_pstate: Intel P-state driver initializing [ 4.182493] ledtrig-cpu: registered to indicate activity on CPUs [ 4.206148] NET: Registered PF_INET6 protocol family [ 4.219724] Segment Routing with IPv6 [ 4.223418] In-situ OAM (IOAM) with IPv6 [ 4.227383] mip6: Mobile IPv6 [ 4.230359] NET: Registered PF_PACKET protocol family [ 4.235497] mpls_gso: MPLS GSO support [ 4.239764] microcode: sig=0x306e4, pf=0x8, revision=0x42e [ 4.245315] microcode: Microcode Update Driver: v2.2. [ 4.245323] IPI shorthand broadcast: enabled [ 4.254675] sched_clock: Marking stable (3265331195, 989309986)->(4629149159, -374507978) [ 4.263121] registered taskstats version 1 [ 4.267236] Loading compiled-in X.509 certificates [ 4.311705] Loaded X.509 cert 'Debian Secure Boot CA: 6ccece7e4c6c0d1f6149f3dd27dfcc5cbb419ea1' [ 4.320434] Loaded X.509 cert 'Debian Secure Boot Signer 2022 - linux: 14011249c2675ea8e5148542202005810584b25f' [ 4.331101] zswap: loaded using pool lzo/zbud [ 4.335695] Key type .fscrypt registered [ 4.339628] Key type fscrypt-provisioning registered [ 4.344896] pstore: Using crash dump compression: deflate [ 4.358312] Key type encrypted registered [ 4.362349] AppArmor: AppArmor sha1 policy hashing enabled [ 4.367846] ima: No TPM chip found, activating TPM-bypass! [ 4.373329] ima: Allocated hash algorithm: sha256 [ 4.378046] ima: No architecture policies found [ 4.382586] evm: Initialising EVM extended attributes: [ 4.387721] evm: security.selinux [ 4.391039] evm: security.SMACK64 (disabled) [ 4.395312] evm: security.SMACK64EXEC (disabled) [ 4.399930] evm: security.SMACK64TRANSMUTE (disabled) [ 4.404983] evm: security.SMACK64MMAP (disabled) [ 4.409601] evm: security.apparmor [ 4.413006] evm: security.ima [ 4.415981] evm: security.capability [ 4.419560] evm: HMAC attrs: 0x1 [ 4.600132] clk: Disabling unused clocks [ 4.605725] Freeing unused decrypted memory: 2036K [ 4.611209] Freeing unused kernel image (initmem) memory: 2796K [ 4.617203] Write protecting the kernel read-only data: 26624k [ 4.623773] Freeing unused kernel image (text/rodata gap) memory: 2040K [ 4.630726] Freeing unused kernel image (rodata/data gap) memory: 1180K [ 4.723432] x86/mm: Checked W+X mappings: passed, no W+X pages found. [ 4.729877] x86/mm: Checking user space page tables [ 4.809591] x86/mm: Checked W+X mappings: passed, no W+X pages found. [ 4.816028] Run /init as init process [ 4.819689] with arguments: [ 4.819691] /init [ 4.819693] with environment: [ 4.819694] HOME=/ [ 4.819695] TERM=linux [ 4.819696] BOOT_IMAGE=/vmlinuz-6.1.0-21-amd64 [ 4.961338] tsc: Refined TSC clocksource calibration: 1799.999 MHz [ 4.967532] clocksource: tsc: mask: 0xffffffffffffffff max_cycles: 0x19f228ab7a2, max_idle_ns: 440795289252 ns [ 4.977569] clocksource: Switched to clocksource tsc [ 5.019453] i801_smbus 0000:00:1f.3: SMBus using PCI interrupt [ 5.048630] e1000e: Intel(R) PRO/1000 Network Driver [ 5.049590] i2c i2c-0: 1/6 memory slots populated (from DMI) [ 5.053619] e1000e: Copyright(c) 1999 - 2015 Intel Corporation. [ 5.059271] i2c i2c-0: Systems with more than 4 memory slots not supported yet, not instantiating SPD [ 5.069632] e1000e 0000:05:00.0: Interrupt Throttling Rate (ints/sec) set to dynamic conservative mode [ 5.084257] ACPI: bus type USB registered [ 5.088309] usbcore: registered new interface driver usbfs [ 5.094115] usbcore: registered new interface driver hub [ 5.099663] usbcore: registered new device driver usb [ 5.108736] SCSI subsystem initialized [ 5.114338] ehci-pci 0000:00:1a.0: EHCI Host Controller [ 5.119576] ehci-pci 0000:00:1a.0: new USB bus registered, assigned bus number 1 [ 5.126977] ehci-pci 0000:00:1a.0: debug port 2 [ 5.135466] ehci-pci 0000:00:1a.0: irq 16, io mem 0xfbb23000 [ 5.142574] libata version 3.00 loaded. [ 5.150300] ahci 0000:00:1f.2: version 3.0 [ 5.153341] ehci-pci 0000:00:1a.0: USB 2.0 started, EHCI 1.00 [ 5.159179] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 6.01 [ 5.160608] ahci 0000:00:1f.2: AHCI 0001.0300 32 slots 6 ports 6 Gbps 0x3f impl SATA mode [ 5.167457] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 5.172565] e1000e 0000:05:00.0 0000:05:00.0 (uninitialized): registered PHC clock [ 5.175638] ahci 0000:00:1f.2: flags: 64bit ncq sntf pm led clo pio slum part ems apst [ 5.182849] usb usb1: Product: EHCI Host Controller [ 5.203295] usb usb1: Manufacturer: Linux 6.1.0-21-amd64 ehci_hcd [ 5.209385] usb usb1: SerialNumber: 0000:00:1a.0 [ 5.214204] hub 1-0:1.0: USB hub found [ 5.217973] hub 1-0:1.0: 2 ports detected [ 5.221646] e1000e 0000:05:00.0 eth0: (PCI Express:2.5GT/s:Width x1) 00:25:90:eb:25:a6 [ 5.222358] ehci-pci 0000:00:1d.0: EHCI Host Controller [ 5.229919] e1000e 0000:05:00.0 eth0: Intel(R) PRO/1000 Network Connection [ 5.235143] ehci-pci 0000:00:1d.0: new USB bus registered, assigned bus number 2 [ 5.242089] e1000e 0000:05:00.0 eth0: MAC: 3, PHY: 8, PBA No: FFFFFF-0FF [ 5.249458] ehci-pci 0000:00:1d.0: debug port 2 [ 5.256357] e1000e 0000:06:00.0: Interrupt Throttling Rate (ints/sec) set to dynamic conservative mode [ 5.262404] scsi host0: ahci [ 5.264582] ehci-pci 0000:00:1d.0: irq 23, io mem 0xfbb22000 [ 5.278709] scsi host1: ahci [ 5.278997] isci: Intel(R) C600 SAS Controller Driver - version 1.2.0 [ 5.281333] ehci-pci 0000:00:1d.0: USB 2.0 started, EHCI 1.00 [ 5.281396] usb usb2: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 6.01 [ 5.281399] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 5.281402] usb usb2: Product: EHCI Host Controller [ 5.281404] usb usb2: Manufacturer: Linux 6.1.0-21-amd64 ehci_hcd [ 5.281406] usb usb2: SerialNumber: 0000:00:1d.0 [ 5.281709] hub 2-0:1.0: USB hub found [ 5.288064] isci 0000:04:00.0: driver configured for rev: 6 silicon [ 5.288357] scsi host2: ahci [ 5.288693] scsi host3: ahci [ 5.289009] scsi host4: ahci [ 5.289330] scsi host5: ahci [ 5.289496] ata1: SATA max UDMA/133 abar m2048@0xfbb21000 port 0xfbb21100 irq 32 [ 5.289501] ata2: SATA max UDMA/133 abar m2048@0xfbb21000 port 0xfbb21180 irq 32 [ 5.289503] ata3: SATA max UDMA/133 abar m2048@0xfbb21000 port 0xfbb21200 irq 32 [ 5.289506] ata4: SATA max UDMA/133 abar m2048@0xfbb21000 port 0xfbb21280 irq 32 [ 5.289508] ata5: SATA max UDMA/133 abar m2048@0xfbb21000 port 0xfbb21300 irq 32 [ 5.289511] ata6: SATA max UDMA/133 abar m2048@0xfbb21000 port 0xfbb21380 irq 32 [ 5.293799] hub 2-0:1.0: 2 ports detected [ 5.320221] isci 0000:04:00.0: OEM parameter table found in OROM [ 5.323537] e1000e 0000:06:00.0 0000:06:00.0 (uninitialized): registered PHC clock [ 5.325503] isci 0000:04:00.0: OEM SAS parameters (version: 1.0) loaded (platform) [ 5.325756] isci 0000:04:00.0: SCU controller 0: phy 3-0 cables: {short, short, short, short} [ 5.386683] e1000e 0000:06:00.0 eth1: (PCI Express:2.5GT/s:Width x1) 00:25:90:eb:25:a7 [ 5.394167] scsi host6: isci [ 5.395414] e1000e 0000:06:00.0 eth1: Intel(R) PRO/1000 Network Connection [ 5.442821] e1000e 0000:06:00.0 eth1: MAC: 3, PHY: 8, PBA No: FFFFFF-0FF [ 5.485376] usb 1-1: new high-speed USB device number 2 using ehci-pci [ 5.581367] usb 2-1: new high-speed USB device number 2 using ehci-pci [ 5.603147] ata3: SATA link down (SStatus 0 SControl 300) [ 5.608584] ata1: SATA link up 6.0 Gbps (SStatus 133 SControl 300) [ 5.614812] ata5: SATA link down (SStatus 0 SControl 300) [ 5.620240] ata4: SATA link down (SStatus 0 SControl 300) [ 5.625695] ata6: SATA link down (SStatus 0 SControl 300) [ 5.631151] ata1.00: ATA-8: WDC WD1003FBYZ-010FB0, 01.01V03, max UDMA/133 [ 5.637966] ata2: SATA link down (SStatus 0 SControl 300) [ 5.643625] ata1.00: 1953525168 sectors, multi 16: LBA48 NCQ (depth 32), AA [ 5.651461] ata1.00: configured for UDMA/133 [ 5.655821] scsi: waiting for bus probes to complete ... [ 5.657684] usb 1-1: New USB device found, idVendor=8087, idProduct=0024, bcdDevice= 0.00 [ 5.669326] usb 1-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0 [ 5.676773] hub 1-1:1.0: USB hub found [ 5.680691] hub 1-1:1.0: 6 ports detected [ 5.741810] usb 2-1: New USB device found, idVendor=8087, idProduct=0024, bcdDevice= 0.00 [ 5.750004] usb 2-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0 [ 5.757528] hub 2-1:1.0: USB hub found [ 5.761468] hub 2-1:1.0: 8 ports detected [ 5.829603] scsi 0:0:0:0: Direct-Access ATA WDC WD1003FBYZ-0 1V03 PQ: 0 ANSI: 5 [ 5.841573] e1000e 0000:05:00.0 enx002590eb25a6: renamed from eth0 [ 5.868206] sd 0:0:0:0: [sda] 1953525168 512-byte logical blocks: (1.00 TB/932 GiB) [ 5.875968] sd 0:0:0:0: [sda] Write Protect is off [ 5.876191] e1000e 0000:06:00.0 enx002590eb25a7: renamed from eth1 [ 5.880764] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00 [ 5.880784] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 5.896028] sd 0:0:0:0: [sda] Preferred minimum I/O size 512 bytes [ 5.923856] sda: sda1 sda2 < sda5 > [ 5.927704] sd 0:0:0:0: [sda] Attached SCSI disk [ 5.973369] usb 1-1.1: new full-speed USB device number 3 using ehci-pci [ 6.087131] usb 1-1.1: New USB device found, idVendor=0557, idProduct=2221, bcdDevice= 0.01 [ 6.095499] usb 1-1.1: New USB device strings: Mfr=1, Product=2, SerialNumber=0 [ 6.102814] usb 1-1.1: Product: Hermon USB hidmouse Device [ 6.108312] usb 1-1.1: Manufacturer: Winbond Electronics Corp [ 6.129555] hid: raw HID events driver (C) Jiri Kosina [ 6.140873] usbcore: registered new interface driver usbhid [ 6.146472] usbhid: USB HID core driver [ 6.152832] input: Winbond Electronics Corp Hermon USB hidmouse Device as /devices/pci0000:00/0000:00:1a.0/usb1/1-1/1-1.1/1-1.1:1.0/0003:0557:2221.0001/input/input3 [ 6.167691] hid-generic 0003:0557:2221.0001: input,hidraw0: USB HID v1.00 Mouse [Winbond Electronics Corp Hermon USB hidmouse Device] on usb-0000:00:1a.0-1.1/input0 [ 6.182560] input: Winbond Electronics Corp Hermon USB hidmouse Device as /devices/pci0000:00/0000:00:1a.0/usb1/1-1/1-1.1/1-1.1:1.1/0003:0557:2221.0002/input/input4 [ 6.254192] device-mapper: core: CONFIG_IMA_DISABLE_HTABLE is disabled. Duplicate IMA measurements will not be recorded in the IMA log. [ 6.257562] hid-generic 0003:0557:2221.0002: input,hidraw1: USB HID v1.00 Keyboard [Winbond Electronics Corp Hermon USB hidmouse Device] on usb-0000:00:1a.0-1.1/input1 [ 6.266414] device-mapper: uevent: version 1.0.3 [ 6.286117] device-mapper: ioctl: 4.47.0-ioctl (2022-07-28) initialised: dm-devel@redhat.com [ 6.827981] PM: Image not found (code -22) [ 7.179516] EXT4-fs (dm-0): mounting ext3 file system using the ext4 subsystem [ 7.190927] EXT4-fs (dm-0): mounted filesystem with ordered data mode. Quota mode: none. [ 7.361854] Not activating Mandatory Access Control as /sbin/tomoyo-init does not exist. [ 9.021247] input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input5 [ 9.046258] ACPI: button: Power Button [PWRB] [ 9.050778] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input6 [ 9.058368] ACPI: button: Power Button [PWRF] [ 9.183495] dca service started, version 1.12.1 [ 9.246074] IPMI message handler: version 39.2 [ 9.269915] ioatdma: Intel(R) QuickData Technology Driver 5.00 [ 9.277483] sd 0:0:0:0: Attached scsi generic sg0 type 0 [ 9.283127] input: PC Speaker as /devices/platform/pcspkr/input/input7 [ 9.335736] iTCO_vendor_support: vendor-support=0 [ 9.351046] ipmi device interface [ 9.414123] ipmi_si: IPMI System Interface driver [ 9.419975] ipmi_si dmi-ipmi-si.0: ipmi_platform: probing via SMBIOS [ 9.426340] ipmi_platform: ipmi_si: SMBIOS: io 0xca2 regsize 1 spacing 1 irq 0 [ 9.433629] ipmi_si: Adding SMBIOS-specified kcs state machine [ 9.439567] ipmi_si IPI0001:00: ipmi_platform: probing via ACPI [ 9.445612] ipmi_si IPI0001:00: ipmi_platform: [io 0x0ca2] regsize 1 spacing 1 irq 0 [ 9.457410] mei_me 0000:00:16.0: Device doesn't have valid ME Interface [ 9.457901] iTCO_wdt iTCO_wdt.1.auto: unable to reset NO_REBOOT flag, device disabled by hardware/BIOS [ 9.478501] ipmi_si dmi-ipmi-si.0: Removing SMBIOS-specified kcs state machine in favor of ACPI [ 9.487220] ipmi_si: Adding ACPI-specified kcs state machine [ 9.492950] ipmi_si: Trying ACPI-specified kcs state machine at i/o address 0xca2, slave address 0x0, irq 0 [ 9.515017] RAPL PMU: API unit is 2^-32 Joules, 3 fixed counters, 163840 ms ovfl timer [ 9.522973] RAPL PMU: hw unit of domain pp0-core 2^-16 Joules [ 9.528736] RAPL PMU: hw unit of domain package 2^-16 Joules [ 9.534396] RAPL PMU: hw unit of domain dram 2^-16 Joules [ 9.552709] cryptd: max_cpu_qlen set to 1000 [ 9.587186] ACPI: bus type drm_connector registered [ 9.657808] AVX version of gcm_enc/dec engaged. [ 9.662471] AES CTR mode by8 optimization enabled [ 9.756216] mgag200 0000:07:01.0: vgaarb: deactivate vga console [ 9.767190] Console: switching to colour dummy device 80x25 [ 9.778619] [drm] Initialized mgag200 1.0.0 20110418 for 0000:07:01.0 on minor 0 [ 9.787792] fbcon: mgag200drmfb (fb0) is primary device [ 9.793460] ipmi_si IPI0001:00: The BMC does not support clearing the recv irq bit, compensating, but the BMC needs to be fixed. [ 9.808977] ipmi_si IPI0001:00: IPMI message handler: Found new BMC (man_id: 0x002a7c, prod_id: 0x0703, dev_id: 0x20) [ 9.873927] ipmi_si IPI0001:00: IPMI kcs interface initialized [ 9.937629] ipmi_ssif: IPMI SSIF Interface driver [ 10.151464] Console: switching to colour frame buffer device 128x48 [ 10.259471] mgag200 0000:07:01.0: [drm] fb0: mgag200drmfb frame buffer device [ 10.366123] EDAC sbridge: Seeking for: PCI ID 8086:0ea0 [ 10.366143] EDAC sbridge: Seeking for: PCI ID 8086:0ea0 [ 10.366147] EDAC sbridge: Seeking for: PCI ID 8086:0e60 [ 10.366153] EDAC sbridge: Seeking for: PCI ID 8086:0ea8 [ 10.366173] EDAC sbridge: Seeking for: PCI ID 8086:0ea8 [ 10.366176] EDAC sbridge: Seeking for: PCI ID 8086:0e71 [ 10.366185] EDAC sbridge: Seeking for: PCI ID 8086:0e71 [ 10.366189] EDAC sbridge: Seeking for: PCI ID 8086:0eaa [ 10.366197] EDAC sbridge: Seeking for: PCI ID 8086:0eaa [ 10.366200] EDAC sbridge: Seeking for: PCI ID 8086:0eab [ 10.366209] EDAC sbridge: Seeking for: PCI ID 8086:0eab [ 10.366212] EDAC sbridge: Seeking for: PCI ID 8086:0eac [ 10.366221] EDAC sbridge: Seeking for: PCI ID 8086:0eac [ 10.366224] EDAC sbridge: Seeking for: PCI ID 8086:0ead [ 10.366233] EDAC sbridge: Seeking for: PCI ID 8086:0ead [ 10.366236] EDAC sbridge: Seeking for: PCI ID 8086:0e68 [ 10.366244] EDAC sbridge: Seeking for: PCI ID 8086:0e79 [ 10.366252] EDAC sbridge: Seeking for: PCI ID 8086:0e6a [ 10.366259] EDAC sbridge: Seeking for: PCI ID 8086:0e6b [ 10.366267] EDAC sbridge: Seeking for: PCI ID 8086:0e6c [ 10.366275] EDAC sbridge: Seeking for: PCI ID 8086:0e6d [ 10.366283] EDAC sbridge: Seeking for: PCI ID 8086:0eb8 [ 10.366290] EDAC sbridge: Seeking for: PCI ID 8086:0ebc [ 10.366298] EDAC sbridge: Seeking for: PCI ID 8086:0ec8 [ 10.366308] EDAC sbridge: Seeking for: PCI ID 8086:0ec8 [ 10.366310] EDAC sbridge: Seeking for: PCI ID 8086:0ec9 [ 10.366319] EDAC sbridge: Seeking for: PCI ID 8086:0ec9 [ 10.366321] EDAC sbridge: Seeking for: PCI ID 8086:0eca [ 10.366331] EDAC sbridge: Seeking for: PCI ID 8086:0eca [ 10.366470] EDAC MC0: Giving out device to module sb_edac controller Ivy Bridge SrcID#0_Ha#0: DEV 0000:ff:0e.0 (INTERRUPT) [ 10.377594] EDAC sbridge: Ver: 1.1.2 [ 10.417691] intel_rapl_common: Found RAPL domain package [ 10.423010] intel_rapl_common: Found RAPL domain core [ 10.428067] intel_rapl_common: Found RAPL domain dram [ 11.624731] EXT4-fs (dm-0): re-mounted. Quota mode: none. [ 12.503308] EXT4-fs (sda1): mounting ext3 file system using the ext4 subsystem [ 12.532588] EXT4-fs (sda1): mounted filesystem with ordered data mode. Quota mode: none. [ 12.589248] Adding 1949692k swap on /dev/mapper/fiano1--vg-swap_1. Priority:-2 extents:1 across:1949692k FS [ 13.108811] audit: type=1400 audit(1718858960.720:2): apparmor="STATUS" operation="profile_load" profile="unconfined" name="lsb_release" pid=1066 comm="apparmor_parser" [ 13.123876] audit: type=1400 audit(1718858960.724:3): apparmor="STATUS" operation="profile_load" profile="unconfined" name="nvidia_modprobe" pid=1067 comm="apparmor_parser" [ 13.139256] audit: type=1400 audit(1718858960.728:4): apparmor="STATUS" operation="profile_load" profile="unconfined" name="nvidia_modprobe//kmod" pid=1067 comm="apparmor_parser" [ 13.171698] audit: type=1400 audit(1718858960.784:5): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/bin/man" pid=1069 comm="apparmor_parser" [ 13.186842] audit: type=1400 audit(1718858960.784:6): apparmor="STATUS" operation="profile_load" profile="unconfined" name="man_filter" pid=1069 comm="apparmor_parser" [ 13.201781] audit: type=1400 audit(1718858960.788:7): apparmor="STATUS" operation="profile_load" profile="unconfined" name="man_groff" pid=1069 comm="apparmor_parser" [ 13.357366] audit: type=1400 audit(1718858960.972:8): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/sbin/ntpd" pid=1073 comm="apparmor_parser" [ 13.373870] audit: type=1400 audit(1718858960.988:9): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=1068 comm="apparmor_parser" [ 13.391916] audit: type=1400 audit(1718858960.988:10): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/NetworkManager/nm-dhcp-helper" pid=1068 comm="apparmor_parser" [ 13.410752] audit: type=1400 audit(1718858960.992:11): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/connman/scripts/dhclient-script" pid=1068 comm="apparmor_parser" [ 16.446415] e1000e 0000:05:00.0 enx002590eb25a6: NIC Link is Up 1000 Mbps Full Duplex, Flow Control: None [ 16.456324] IPv6: ADDRCONF(NETDEV_CHANGE): enx002590eb25a6: link becomes ready