[ 0.000000] Linux version 6.1.94+ (osstest@himrod1) (gcc (Debian 12.2.0-14) 12.2.0, GNU ld (GNU Binutils for Debian) 2.40) #1 SMP PREEMPT_DYNAMIC Thu Jun 20 07:32:25 UTC 2024 [ 0.000000] Command line: placeholder root=/dev/mapper/godello1--vg-root ro console=hvc0 [ 0.000000] Released 0 page(s) [ 0.000000] BIOS-provided physical RAM map: [ 0.000000] Xen: [mem 0x0000000000000000-0x000000000009efff] usable [ 0.000000] Xen: [mem 0x000000000009f000-0x00000000000fffff] reserved [ 0.000000] Xen: [mem 0x0000000000100000-0x0000000020060fff] usable [ 0.000000] Xen: [mem 0x000000009573f000-0x0000000095bbefff] reserved [ 0.000000] Xen: [mem 0x0000000095bbf000-0x0000000095fbefff] ACPI NVS [ 0.000000] Xen: [mem 0x0000000095fbf000-0x0000000095ffefff] ACPI data [ 0.000000] Xen: [mem 0x0000000096000000-0x000000009fffffff] reserved [ 0.000000] Xen: [mem 0x00000000f0000000-0x00000000f7ffffff] reserved [ 0.000000] Xen: [mem 0x00000000feb00000-0x00000000feb03fff] reserved [ 0.000000] Xen: [mem 0x00000000fec00000-0x00000000fec00fff] reserved [ 0.000000] Xen: [mem 0x00000000fed10000-0x00000000fed19fff] reserved [ 0.000000] Xen: [mem 0x00000000fed1c000-0x00000000fed1ffff] reserved [ 0.000000] Xen: [mem 0x00000000fed90000-0x00000000fed90fff] reserved [ 0.000000] Xen: [mem 0x00000000fee00000-0x00000000feefffff] reserved [ 0.000000] Xen: [mem 0x00000000ffa00000-0x00000000ffffffff] reserved [ 0.000000] NX (Execute Disable) protection: active [ 0.000000] SMBIOS 2.7 present. [ 0.000000] DMI: Dell Inc. PowerEdge R220/081N4V, BIOS 1.1.4 05/06/2014 [ 0.000000] Hypervisor detected: Xen PV [ 0.000471] tsc: Detected 3092.836 MHz processor [ 0.000797] e820: update [mem 0x00000000-0x00000fff] usable ==> reserved [ 0.000802] e820: remove [mem 0x000a0000-0x000fffff] usable [ 0.000807] last_pfn = 0x20061 max_arch_pfn = 0x400000000 [ 0.000809] Disabled [ 0.000811] x86/PAT: MTRRs disabled, skipping PAT initialization too. [ 0.000815] x86/PAT: Configuration [0-7]: WB WT UC- UC WC WP UC UC [ 0.000860] Kernel/User page tables isolation: disabled on XEN PV. [ 0.021110] RAMDISK: [mem 0x04000000-0x0536afff] [ 0.021123] ACPI: Early table checksum verification disabled [ 0.022753] ACPI: RSDP 0x00000000000FE020 000024 (v02 DELL ) [ 0.022766] ACPI: XSDT 0x0000000095FCF188 0000E4 (v01 DELL PE_SC3 00000001 01000013) [ 0.022830] ACPI: FACP 0x0000000095FF7000 00010C (v05 DELL PE_SC3 00000001 DELL 00040000) [ 0.022908] ACPI: DSDT 0x0000000095FDF000 012335 (v01 DELL PE_SC3 00000000 DELL 00040000) [ 0.022922] ACPI: FACS 0x0000000095FBD000 000040 [ 0.022936] ACPI: UEFI 0x0000000095FFD000 000236 (v01 DELL PE_SC3 00000001 DELL 00040000) [ 0.022951] ACPI: UEFI 0x0000000095FFC000 000042 (v01 DELL PE_SC3 00000000 DELL 00040000) [ 0.022965] ACPI: ASF! 0x0000000095FFB000 0000A5 (v32 DELL PE_SC3 00000001 DELL 00040000) [ 0.022981] ACPI: ASPT 0x0000000095FFA000 000034 (v07 DELL PE_SC3 00000001 DELL 00040000) [ 0.022994] ACPI: BOOT 0x0000000095FF9000 000028 (v01 DELL PE_SC3 00000001 DELL 00040000) [ 0.023008] ACPI: DBGP 0x0000000095FF8000 000034 (v01 DELL PE_SC3 00000001 DELL 00040000) [ 0.023021] ACPI: HPET 0x0000000095FF6000 000038 (v01 DELL PE_SC3 00000001 DELL 00040000) [ 0.023035] ACPI: APIC 0x0000000095FF5000 000092 (v03 DELL PE_SC3 00000001 DELL 00040000) [ 0.023049] ACPI: MCFG 0x0000000095FF4000 00003C (v01 DELL PE_SC3 00000001 DELL 00040000) [ 0.023063] ACPI: SLIC 0x0000000095FF3000 000176 (v01 DELL PE_SC3 00000001 DELL 00040000) [ 0.023077] ACPI: SSDT 0x0000000095FDC000 002028 (v01 DELL PE_SC3 00001000 DELL 00040000) [ 0.023092] ACPI: SPMI 0x0000000095FDA000 000040 (v05 DELL PE_SC3 00000001 DELL 00040000) [ 0.023106] ACPI: SSDT 0x0000000095FD9000 000533 (v01 DELL PE_SC3 00003000 DELL 00040000) [ 0.023119] ACPI: SSDT 0x0000000095FD8000 000ACE (v01 DELL PE_SC3 00003000 DELL 00040000) [ 0.023134] ACPI: SSDT 0x0000000095FD4000 003492 (v01 DELL PE_SC3 00003000 DELL 00040000) [ 0.023147] ACPI: SPCR 0x0000000095FF2000 000050 (v01 DELL PE_SC3 00000001 DELL 00040000) [ 0.023161] ACPI: RMAD 0x0000000095FD3000 000080 (v01 DELL PE_SC3 00000001 DELL 00040000) [ 0.023174] ACPI: SSDT 0x0000000095FD2000 000514 (v01 DELL PE_SC3 00001000 DELL 00040000) [ 0.023187] ACPI: FPDT 0x0000000095FD1000 000044 (v01 DELL PE_SC3 00000001 DELL 00040000) [ 0.023202] ACPI: HEST 0x0000000095FD0000 0000A8 (v01 DELL PE_SC3 00000001 DELL 00040000) [ 0.023216] ACPI: ERST 0x0000000095FCE000 000230 (v01 DELL PE_SC3 00000001 DELL 00040000) [ 0.023230] ACPI: BERT 0x0000000095FCD000 000030 (v01 DELL PE_SC3 00000001 DELL 00040000) [ 0.023243] ACPI: EINJ 0x0000000095FCC000 000150 (v01 DELL PE_SC3 00000001 DELL 00040000) [ 0.023250] ACPI: Reserving FACP table memory at [mem 0x95ff7000-0x95ff710b] [ 0.023252] ACPI: Reserving DSDT table memory at [mem 0x95fdf000-0x95ff1334] [ 0.023253] ACPI: Reserving FACS table memory at [mem 0x95fbd000-0x95fbd03f] [ 0.023254] ACPI: Reserving UEFI table memory at [mem 0x95ffd000-0x95ffd235] [ 0.023255] ACPI: Reserving UEFI table memory at [mem 0x95ffc000-0x95ffc041] [ 0.023255] ACPI: Reserving ASF! table memory at [mem 0x95ffb000-0x95ffb0a4] [ 0.023256] ACPI: Reserving ASPT table memory at [mem 0x95ffa000-0x95ffa033] [ 0.023257] ACPI: Reserving BOOT table memory at [mem 0x95ff9000-0x95ff9027] [ 0.023258] ACPI: Reserving DBGP table memory at [mem 0x95ff8000-0x95ff8033] [ 0.023259] ACPI: Reserving HPET table memory at [mem 0x95ff6000-0x95ff6037] [ 0.023260] ACPI: Reserving APIC table memory at [mem 0x95ff5000-0x95ff5091] [ 0.023260] ACPI: Reserving MCFG table memory at [mem 0x95ff4000-0x95ff403b] [ 0.023261] ACPI: Reserving SLIC table memory at [mem 0x95ff3000-0x95ff3175] [ 0.023262] ACPI: Reserving SSDT table memory at [mem 0x95fdc000-0x95fde027] [ 0.023262] ACPI: Reserving SPMI table memory at [mem 0x95fda000-0x95fda03f] [ 0.023263] ACPI: Reserving SSDT table memory at [mem 0x95fd9000-0x95fd9532] [ 0.023264] ACPI: Reserving SSDT table memory at [mem 0x95fd8000-0x95fd8acd] [ 0.023265] ACPI: Reserving SSDT table memory at [mem 0x95fd4000-0x95fd7491] [ 0.023266] ACPI: Reserving SPCR table memory at [mem 0x95ff2000-0x95ff204f] [ 0.023267] ACPI: Reserving RMAD table memory at [mem 0x95fd3000-0x95fd307f] [ 0.023267] ACPI: Reserving SSDT table memory at [mem 0x95fd2000-0x95fd2513] [ 0.023268] ACPI: Reserving FPDT table memory at [mem 0x95fd1000-0x95fd1043] [ 0.023269] ACPI: Reserving HEST table memory at [mem 0x95fd0000-0x95fd00a7] [ 0.023270] ACPI: Reserving ERST table memory at [mem 0x95fce000-0x95fce22f] [ 0.023271] ACPI: Reserving BERT table memory at [mem 0x95fcd000-0x95fcd02f] [ 0.023271] ACPI: Reserving EINJ table memory at [mem 0x95fcc000-0x95fcc14f] [ 0.023331] Setting APIC routing to Xen PV. [ 0.026291] Zone ranges: [ 0.026293] DMA [mem 0x0000000000001000-0x0000000000ffffff] [ 0.026296] DMA32 [mem 0x0000000001000000-0x0000000020060fff] [ 0.026297] Normal empty [ 0.026298] Movable zone start for each node [ 0.026299] Early memory node ranges [ 0.026299] node 0: [mem 0x0000000000001000-0x000000000009efff] [ 0.026301] node 0: [mem 0x0000000000100000-0x0000000020060fff] [ 0.026303] Initmem setup node 0 [mem 0x0000000000001000-0x0000000020060fff] [ 0.026311] On node 0, zone DMA: 1 pages in unavailable ranges [ 0.026391] On node 0, zone DMA: 97 pages in unavailable ranges [ 0.029787] On node 0, zone DMA32: 32671 pages in unavailable ranges [ 0.029792] p2m virtual area at (____ptrval____), size is 40000000 [ 0.165897] Remapped 97 page(s) [ 0.166539] ACPI: PM-Timer IO Port: 0x1808 [ 0.166601] ACPI: LAPIC_NMI (acpi_id[0xff] high edge lint[0x1]) [ 0.166634] IOAPIC[0]: apic_id 2, version 32, address 0xfec00000, GSI 0-23 [ 0.166649] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl) [ 0.166653] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level) [ 0.166679] ACPI: Using ACPI (MADT) for SMP configuration information [ 0.166684] ACPI: HPET id: 0x8086a201 base: 0xfed00000 [ 0.166695] ACPI: SPCR: SPCR table version 1 [ 0.166699] ACPI: SPCR: console: uart,io,0x3f8,115200 [ 0.166752] smpboot: Allowing 4 CPUs, 0 hotplug CPUs [ 0.166771] PM: hibernation: Registered nosave memory: [mem 0x00000000-0x00000fff] [ 0.166775] PM: hibernation: Registered nosave memory: [mem 0x0009f000-0x000fffff] [ 0.166777] [mem 0x20061000-0x9573efff] available for PCI devices [ 0.166782] Booting kernel on Xen [ 0.166783] Xen version: 4.19-unstable (preserve-AD) [ 0.166787] clocksource: refined-jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 1910969940391419 ns [ 0.172141] setup_percpu: NR_CPUS:64 nr_cpumask_bits:4 nr_cpu_ids:4 nr_node_ids:1 [ 0.172645] percpu: Embedded 54 pages/cpu s180520 r8192 d32472 u524288 [ 0.172653] pcpu-alloc: s180520 r8192 d32472 u524288 alloc=1*2097152 [ 0.172656] pcpu-alloc: [0] 0 1 2 3 [ 0.172734] xen: PV spinlocks enabled [ 0.172741] PV qspinlock hash table entries: 256 (order: 0, 4096 bytes, linear) [ 0.172749] Built 1 zonelists, mobility grouping on. Total pages: 129006 [ 0.172752] Kernel command line: placeholder root=/dev/mapper/godello1--vg-root ro console=hvc0 [ 0.172814] Unknown kernel command line parameters "placeholder", will be passed to user space. [ 0.172837] random: crng init done [ 0.172916] Dentry cache hash table entries: 65536 (order: 7, 524288 bytes, linear) [ 0.172959] Inode-cache hash table entries: 32768 (order: 6, 262144 bytes, linear) [ 0.173566] mem auto-init: stack:all(zero), heap alloc:off, heap free:off [ 0.173572] software IO TLB: area num 4. [ 0.248947] Memory: 390896K/524284K available (14349K kernel code, 2682K rwdata, 4576K rodata, 1576K init, 1296K bss, 133136K reserved, 0K cma-reserved) [ 0.249082] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1 [ 0.251403] Dynamic Preempt: voluntary [ 0.251475] rcu: Preemptible hierarchical RCU implementation. [ 0.251475] rcu: RCU event tracing is enabled. [ 0.251476] rcu: RCU restricting CPUs from NR_CPUS=64 to nr_cpu_ids=4. [ 0.251478] Trampoline variant of Tasks RCU enabled. [ 0.251479] rcu: RCU calculated value of scheduler-enlistment delay is 100 jiffies. [ 0.251480] rcu: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=4 [ 0.259160] NR_IRQS: 4352, nr_irqs: 456, preallocated irqs: 16 [ 0.259271] xen:events: Using FIFO-based ABI [ 0.259298] xen: --> pirq=1 -> irq=1 (gsi=1) [ 0.259305] xen: --> pirq=2 -> irq=2 (gsi=2) [ 0.259310] xen: --> pirq=3 -> irq=3 (gsi=3) [ 0.259315] xen: --> pirq=4 -> irq=4 (gsi=4) [ 0.259320] xen: --> pirq=5 -> irq=5 (gsi=5) [ 0.259330] xen: --> pirq=6 -> irq=6 (gsi=6) [ 0.259335] xen: --> pirq=7 -> irq=7 (gsi=7) [ 0.259341] xen: --> pirq=8 -> irq=8 (gsi=8) [ 0.259346] xen: --> pirq=9 -> irq=9 (gsi=9) [ 0.259351] xen: --> pirq=10 -> irq=10 (gsi=10) [ 0.259357] xen: --> pirq=11 -> irq=11 (gsi=11) [ 0.259362] xen: --> pirq=12 -> irq=12 (gsi=12) [ 0.259368] xen: --> pirq=13 -> irq=13 (gsi=13) [ 0.259374] xen: --> pirq=14 -> irq=14 (gsi=14) [ 0.259379] xen: --> pirq=15 -> irq=15 (gsi=15) [ 0.259391] rcu: srcu_init: Setting srcu_struct sizes based on contention. [ 0.268653] Console: colour VGA+ 80x25 [ 0.287735] printk: console [tty0] enabled [ 0.288786] printk: console [hvc0] enabled [ 0.288940] ACPI: Core revision 20220331 [ 0.309286] clocksource: xen: mask: 0xffffffffffffffff max_cycles: 0x1cd42e4dffb, max_idle_ns: 881590591483 ns [ 0.309492] Xen: using vcpuop timer interface [ 0.309502] installing Xen timer for CPU 0 [ 0.309688] clocksource: tsc-early: mask: 0xffffffffffffffff max_cycles: 0x2c94d83b270, max_idle_ns: 440795286026 ns [ 0.309878] Calibrating delay loop (skipped), value calculated using timer frequency.. 6185.67 BogoMIPS (lpj=3092836) [ 0.310211] Last level iTLB entries: 4KB 1024, 2MB 1024, 4MB 1024 [ 0.310356] Last level dTLB entries: 4KB 1024, 2MB 1024, 4MB 1024, 1GB 4 [ 0.310510] Spectre V1 : Mitigation: usercopy/swapgs barriers and __user pointer sanitization [ 0.310887] Spectre V2 : Mitigation: Retpolines [ 0.311026] Spectre V2 : Spectre v2 / SpectreRSB mitigation: Filling RSB on context switch [ 0.311194] Spectre V2 : Spectre v2 / SpectreRSB : Filling RSB on VMEXIT [ 0.311339] Spectre V2 : Enabling Restricted Speculation for firmware calls [ 0.311487] Spectre V2 : mitigation: Enabling conditional Indirect Branch Prediction Barrier [ 0.311673] Spectre V2 : User space: Mitigation: STIBP via prctl [ 0.311816] Speculative Store Bypass: Mitigation: Speculative Store Bypass disabled via prctl [ 0.311881] MDS: Mitigation: Clear CPU buffers [ 0.312021] MMIO Stale Data: Unknown: No mitigations [ 0.312162] SRBDS: Unknown: Dependent on hypervisor status [ 0.312326] x86/fpu: Supporting XSAVE feature 0x001: 'x87 floating point registers' [ 0.312499] x86/fpu: Supporting XSAVE feature 0x002: 'SSE registers' [ 0.312667] x86/fpu: Supporting XSAVE feature 0x004: 'AVX registers' [ 0.312812] x86/fpu: xstate_offset[2]: 576, xstate_sizes[2]: 256 [ 0.312878] x86/fpu: Enabled xstate features 0x7, context size is 832 bytes, using 'standard' format. [ 0.330549] Freeing SMP alternatives memory: 40K [ 0.330718] pid_max: default: 32768 minimum: 301 [ 0.330889] LSM: Security Framework initializing [ 0.331038] SELinux: Initializing. [ 0.331217] Mount-cache hash table entries: 1024 (order: 1, 8192 bytes, linear) [ 0.331392] Mountpoint-cache hash table entries: 1024 (order: 1, 8192 bytes, linear) [ 0.331991] cpu 0 spinlock event irq 25 [ 0.332136] VPMU disabled by hypervisor. [ 0.332543] cblist_init_generic: Setting adjustable number of callback queues. [ 0.332719] cblist_init_generic: Setting shift to 2 and lim to 1. [ 0.332896] Performance Events: unsupported p6 CPU model 60 no PMU driver, software events only. [ 0.333080] signal: max sigframe size: 1776 [ 0.333257] rcu: Hierarchical SRCU implementation. [ 0.333402] rcu: Max phase no-delay instances is 400. [ 0.333871] smp: Bringing up secondary CPUs ... [ 0.334185] installing Xen timer for CPU 1 [ 0.334607] cpu 1 spinlock event irq 35 [ 0.334988] MDS CPU bug present and SMT on, data leak possible. See https://www.kernel.org/doc/html/latest/admin-guide/hw-vuln/mds.html for more details. [ 0.335357] installing Xen timer for CPU 2 [ 0.336137] cpu 2 spinlock event irq 41 [ 0.336137] installing Xen timer for CPU 3 [ 0.336904] cpu 3 spinlock event irq 47 [ 0.337050] smp: Brought up 1 node, 4 CPUs [ 0.337132] smpboot: Max logical packages: 1 [ 0.337381] devtmpfs: initialized [ 0.337934] x86/mm: Memory block size: 128MB [ 0.338238] ACPI: PM: Registering ACPI NVS region [mem 0x95bbf000-0x95fbefff] (4194304 bytes) [ 0.338238] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 1911260446275000 ns [ 0.338352] futex hash table entries: 1024 (order: 4, 65536 bytes, linear) [ 0.339005] PM: RTC time: 08:44:37, date: 2024-06-20 [ 0.339232] NET: Registered PF_NETLINK/PF_ROUTE protocol family [ 0.339406] xen:grant_table: Grant tables using version 1 layout [ 0.339568] Grant table initialized [ 0.339806] audit: initializing netlink subsys (disabled) [ 0.339899] audit: type=2000 audit(1718873078.169:1): state=initialized audit_enabled=0 res=1 [ 0.339931] thermal_sys: Registered thermal governor 'step_wise' [ 0.339931] thermal_sys: Registered thermal governor 'user_space' [ 0.339944] Simple Boot Flag at 0x44 set to 0x1 [ 0.340371] ACPI FADT declares the system doesn't support PCIe ASPM, so disable it [ 0.340909] PCI: MMCONFIG for domain 0000 [bus 00-7f] at [mem 0xf0000000-0xf7ffffff] (base 0xf0000000) [ 0.341098] PCI: MMCONFIG at [mem 0xf0000000-0xf7ffffff] reserved in E820 [ 0.386006] PCI: Using configuration type 1 for base access [ 0.386319] PCI: Dell System detected, enabling pci=bfsort. [ 0.388649] kprobes: kprobe jump-optimization is enabled. All kprobes are optimized if possible. [ 0.388977] ACPI: Added _OSI(Module Device) [ 0.389107] ACPI: Added _OSI(Processor Device) [ 0.389249] ACPI: Added _OSI(3.0 _SCP Extensions) [ 0.389395] ACPI: Added _OSI(Processor Aggregator Device) [ 0.400308] ACPI: 6 ACPI AML tables successfully acquired and loaded [ 0.401081] xen: registering gsi 9 triggering 0 polarity 0 [ 0.401549] ACPI: [Firmware Bug]: BIOS _OSI(Linux) query ignored [ 0.410310] ACPI: Dynamic OEM Table Load: [ 0.410457] ACPI: SSDT 0xFFFF888003C69000 0003D3 (v01 PmRef Cpu0Cst 00003001 INTL 20120816) [ 0.410545] ACPI: Dynamic OEM Table Load: [ 0.410687] ACPI: SSDT 0xFFFF888003CC2000 0005AA (v01 PmRef ApIst 00003000 INTL 20120816) [ 0.411493] ACPI: Dynamic OEM Table Load: [ 0.411635] ACPI: SSDT 0xFFFF888003658800 000119 (v01 PmRef ApCst 00003000 INTL 20120816) [ 0.412916] ACPI: Interpreter enabled [ 0.413066] ACPI: PM: (supports S0 S4 S5) [ 0.413204] ACPI: Using IOAPIC for interrupt routing [ 0.413367] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug [ 0.413638] PCI: Using E820 reservations for host bridge windows [ 0.414036] ACPI: Enabled 11 GPEs in block 00 to 3F [ 0.419940] acpi ABCD0000:00: ACPI dock station (docks/bays count: 1) [ 0.427710] ACPI: PM: Power Resource [FN00] [ 0.427888] ACPI: PM: Power Resource [FN01] [ 0.428065] ACPI: PM: Power Resource [FN02] [ 0.428234] ACPI: PM: Power Resource [FN03] [ 0.428403] ACPI: PM: Power Resource [FN04] [ 0.429244] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-7e]) [ 0.429393] acpi PNP0A08:00: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI HPX-Type3] [ 0.430425] acpi PNP0A08:00: _OSC: OS now controls [PME PCIeCapability LTR] [ 0.430573] acpi PNP0A08:00: FADT indicates ASPM is unsupported, using BIOS configuration [ 0.431228] PCI host bridge to bus 0000:00 [ 0.431367] pci_bus 0000:00: root bus resource [io 0x0000-0x0cf7 window] [ 0.431514] pci_bus 0000:00: root bus resource [io 0x0d00-0xffff window] [ 0.431661] pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff window] [ 0.431834] pci_bus 0000:00: root bus resource [mem 0xa0000000-0xfeafffff window] [ 0.432879] pci_bus 0000:00: root bus resource [bus 00-7e] [ 0.433057] pci 0000:00:00.0: [8086:0c08] type 00 class 0x060000 [ 0.433598] pci 0000:00:14.0: [8086:8c31] type 00 class 0x0c0330 [ 0.433814] pci 0000:00:14.0: reg 0x10: [mem 0xa2b00000-0xa2b0ffff 64bit] [ 0.434153] pci 0000:00:14.0: PME# supported from D3hot D3cold [ 0.434526] pci 0000:00:1a.0: [8086:8c2d] type 00 class 0x0c0320 [ 0.434720] pci 0000:00:1a.0: reg 0x10: [mem 0xa2b12000-0xa2b123ff] [ 0.435191] pci 0000:00:1a.0: PME# supported from D0 D3hot D3cold [ 0.435518] pci 0000:00:1c.0: [8086:8c10] type 01 class 0x060400 [ 0.436013] pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold [ 0.436226] pci 0000:00:1c.0: Enabling MPC IRBNCE [ 0.436362] pci 0000:00:1c.0: Intel PCH root port ACS workaround enabled [ 0.436846] pci 0000:00:1c.2: [8086:8c14] type 01 class 0x060400 [ 0.437223] pci 0000:00:1c.2: PME# supported from D0 D3hot D3cold [ 0.437439] pci 0000:00:1c.2: Enabling MPC IRBNCE [ 0.437584] pci 0000:00:1c.2: Intel PCH root port ACS workaround enabled [ 0.438091] pci 0000:00:1d.0: [8086:8c26] type 00 class 0x0c0320 [ 0.438290] pci 0000:00:1d.0: reg 0x10: [mem 0xa2b11000-0xa2b113ff] [ 0.438748] pci 0000:00:1d.0: PME# supported from D0 D3hot D3cold [ 0.439074] pci 0000:00:1f.0: [8086:8c52] type 00 class 0x060100 [ 0.439724] pci 0000:00:1f.2: [8086:8c02] type 00 class 0x010601 [ 0.439925] pci 0000:00:1f.2: reg 0x10: [io 0x3048-0x304f] [ 0.440096] pci 0000:00:1f.2: reg 0x14: [io 0x3054-0x3057] [ 0.440267] pci 0000:00:1f.2: reg 0x18: [io 0x3040-0x3047] [ 0.440438] pci 0000:00:1f.2: reg 0x1c: [io 0x3050-0x3053] [ 0.440610] pci 0000:00:1f.2: reg 0x20: [io 0x3020-0x303f] [ 0.440780] pci 0000:00:1f.2: reg 0x24: [mem 0xa2b10000-0xa2b107ff] [ 0.441049] pci 0000:00:1f.2: PME# supported from D3hot [ 0.441338] pci 0000:00:1f.3: [8086:8c22] type 00 class 0x0c0500 [ 0.441545] pci 0000:00:1f.3: reg 0x10: [mem 0xa2b13000-0xa2b130ff 64bit] [ 0.441773] pci 0000:00:1f.3: reg 0x20: [io 0x3000-0x301f] [ 0.442325] pci 0000:01:00.0: [14e4:165f] type 00 class 0x020000 [ 0.442690] pci 0000:01:00.0: reg 0x10: [mem 0xa2a30000-0xa2a3ffff 64bit pref] [ 0.442993] pci 0000:01:00.0: reg 0x18: [mem 0xa2a40000-0xa2a4ffff 64bit pref] [ 0.443283] pci 0000:01:00.0: reg 0x20: [mem 0xa2a50000-0xa2a5ffff 64bit pref] [ 0.443544] pci 0000:01:00.0: reg 0x30: [mem 0x00000000-0x0003ffff pref] [ 0.444214] pci 0000:01:00.0: PME# supported from D0 D3hot D3cold [ 0.445014] pci 0000:01:00.1: [14e4:165f] type 00 class 0x020000 [ 0.445307] pci 0000:01:00.1: reg 0x10: [mem 0xa2a00000-0xa2a0ffff 64bit pref] [ 0.445600] pci 0000:01:00.1: reg 0x18: [mem 0xa2a10000-0xa2a1ffff 64bit pref] [ 0.445946] pci 0000:01:00.1: reg 0x20: [mem 0xa2a20000-0xa2a2ffff 64bit pref] [ 0.446214] pci 0000:01:00.1: reg 0x30: [mem 0x00000000-0x0003ffff pref] [ 0.446829] pci 0000:01:00.1: PME# supported from D0 D3hot D3cold [ 0.447534] pci 0000:00:1c.0: PCI bridge to [bus 01] [ 0.447709] pci 0000:00:1c.0: bridge window [mem 0xa2a00000-0xa2afffff 64bit pref] [ 0.448429] pci 0000:02:00.0: [1912:0013] type 01 class 0x060400 [ 0.451562] pci 0000:02:00.0: PME# supported from D0 D3hot D3cold [ 0.453094] pci 0000:00:1c.2: PCI bridge to [bus 02-06] [ 0.453252] pci 0000:00:1c.2: bridge window [mem 0xa2000000-0xa29fffff] [ 0.453415] pci 0000:00:1c.2: bridge window [mem 0xa1000000-0xa1ffffff 64bit pref] [ 0.454878] pci 0000:03:00.0: [1912:0013] type 01 class 0x060400 [ 0.458312] pci 0000:03:00.0: PME# supported from D0 D3hot D3cold [ 0.460143] pci 0000:03:01.0: [1912:0013] type 01 class 0x060400 [ 0.463835] pci 0000:03:01.0: PME# supported from D0 D3hot D3cold [ 0.468370] pci 0000:02:00.0: PCI bridge to [bus 03-06] [ 0.468705] pci 0000:02:00.0: bridge window [mem 0xa2000000-0xa29fffff] [ 0.468985] pci 0000:02:00.0: bridge window [mem 0xa1000000-0xa1ffffff 64bit pref] [ 0.470477] pci 0000:04:00.0: [1912:0012] type 01 class 0x060400 [ 0.475193] pci 0000:03:00.0: PCI bridge to [bus 04-05] [ 0.475551] pci 0000:03:00.0: bridge window [mem 0xa2000000-0xa28fffff] [ 0.475852] pci 0000:03:00.0: bridge window [mem 0xa1000000-0xa1ffffff 64bit pref] [ 0.476913] pci_bus 0000:05: extended config space not accessible [ 0.477298] pci 0000:05:00.0: [102b:0534] type 00 class 0x030000 [ 0.477921] pci 0000:05:00.0: reg 0x10: [mem 0xa1000000-0xa1ffffff pref] [ 0.490143] pci 0000:05:00.0: reg 0x14: [mem 0xa2800000-0xa2803fff] [ 0.490549] pci 0000:05:00.0: reg 0x18: [mem 0xa2000000-0xa27fffff] [ 0.492031] pci 0000:05:00.0: Video device with shadowed ROM at [mem 0x000c0000-0x000dffff] [ 0.495546] pci 0000:04:00.0: PCI bridge to [bus 05] [ 0.495878] pci 0000:04:00.0: bridge window [mem 0xa2000000-0xa28fffff] [ 0.496173] pci 0000:04:00.0: bridge window [mem 0xa1000000-0xa1ffffff 64bit pref] [ 0.497956] pci 0000:06:00.0: [1912:0011] type 00 class 0x050000 [ 0.498593] pci 0000:06:00.0: reg 0x10: [mem 0xa2901000-0xa2901fff] [ 0.498990] pci 0000:06:00.0: reg 0x14: [mem 0xa2900000-0xa290007f] [ 0.501403] pci 0000:06:00.0: PME# supported from D3hot [ 0.502370] pci 0000:03:01.0: PCI bridge to [bus 06] [ 0.502729] pci 0000:03:01.0: bridge window [mem 0xa2900000-0xa29fffff] [ 0.503928] pci_bus 0000:00: on NUMA node 0 [ 0.504128] xen: registering gsi 13 triggering 1 polarity 0 [ 0.505137] ACPI: PCI: Interrupt link LNKA configured for IRQ 10 [ 0.505358] ACPI: PCI: Interrupt link LNKB configured for IRQ 11 [ 0.505580] ACPI: PCI: Interrupt link LNKC configured for IRQ 10 [ 0.505795] ACPI: PCI: Interrupt link LNKD configured for IRQ 10 [ 0.505952] ACPI: PCI: Interrupt link LNKE configured for IRQ 0 [ 0.506096] ACPI: PCI: Interrupt link LNKE disabled [ 0.506311] ACPI: PCI: Interrupt link LNKF configured for IRQ 0 [ 0.506459] ACPI: PCI: Interrupt link LNKF disabled [ 0.506667] ACPI: PCI: Interrupt link LNKG configured for IRQ 0 [ 0.506811] ACPI: PCI: Interrupt link LNKG disabled [ 0.506954] ACPI: PCI: Interrupt link LNKH configured for IRQ 11 [ 0.508668] xen:balloon: Initialising balloon driver [ 0.508929] iommu: Default domain type: Translated [ 0.509072] iommu: DMA domain TLB invalidation policy: lazy mode [ 0.509264] SCSI subsystem initialized [ 0.509416] libata version 3.00 loaded. [ 0.509416] ACPI: bus type USB registered [ 0.509416] usbcore: registered new interface driver usbfs [ 0.509416] usbcore: registered new interface driver hub [ 0.509901] usbcore: registered new device driver usb [ 0.510053] pps_core: LinuxPPS API ver. 1 registered [ 0.510192] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti [ 0.510371] PTP clock support registered [ 0.510522] Advanced Linux Sound Architecture Driver Initialized. [ 0.510522] NetLabel: Initializing [ 0.510880] NetLabel: domain hash size = 128 [ 0.511018] NetLabel: protocols = UNLABELED CIPSOv4 CALIPSO [ 0.511173] NetLabel: unlabeled traffic allowed by default [ 0.511333] PCI: Using ACPI for IRQ routing [ 0.527651] PCI: pci_cache_line_size set to 64 bytes [ 0.528291] e820: reserve RAM buffer [mem 0x0009f000-0x0009ffff] [ 0.528293] e820: reserve RAM buffer [mem 0x20061000-0x23ffffff] [ 0.528311] pci 0000:05:00.0: vgaarb: setting as boot VGA device [ 0.528311] pci 0000:05:00.0: vgaarb: bridge control possible [ 0.528322] pci 0000:05:00.0: vgaarb: VGA device added: decodes=io+mem,owns=io+mem,locks=none [ 0.528879] vgaarb: loaded [ 0.530170] clocksource: Switched to clocksource tsc-early [ 0.530358] VFS: Disk quotas dquot_6.6.0 [ 0.530503] VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes) [ 0.530664] hugetlbfs: disabling because there are no supported hugepage sizes [ 0.530868] pnp: PnP ACPI init [ 0.530868] system 00:00: [io 0x0680-0x069f] has been reserved [ 0.530984] system 00:00: [io 0xffff] has been reserved [ 0.531117] system 00:00: [io 0xffff] has been reserved [ 0.531257] system 00:00: [io 0xffff] has been reserved [ 0.531394] system 00:00: [io 0x1800-0x18fe] has been reserved [ 0.531537] system 00:00: [io 0x164e-0x164f] has been reserved [ 0.531718] system 00:01: [io 0x0800-0x087f] has been reserved [ 0.531897] xen: registering gsi 8 triggering 1 polarity 0 [ 0.531951] system 00:03: [io 0x1854-0x1857] has been reserved [ 0.532395] xen: registering gsi 3 triggering 1 polarity 0 [ 0.532652] xen: registering gsi 4 triggering 1 polarity 0 [ 0.532655] Already setup the GSI :4 [ 0.532978] system 00:06: [mem 0xfed1c000-0xfed1ffff] has been reserved [ 0.533125] system 00:06: [mem 0xfed10000-0xfed17fff] has been reserved [ 0.533267] system 00:06: [mem 0xfed18000-0xfed18fff] has been reserved [ 0.533412] system 00:06: [mem 0xfed19000-0xfed19fff] has been reserved [ 0.533561] system 00:06: [mem 0xf0000000-0xf7ffffff] has been reserved [ 0.533706] system 00:06: [mem 0xfed20000-0xfed3ffff] has been reserved [ 0.533852] system 00:06: [mem 0xfed90000-0xfed93fff] could not be reserved [ 0.534010] system 00:06: [mem 0xff000000-0xffffffff] could not be reserved [ 0.534155] system 00:06: [mem 0xfee00000-0xfeefffff] has been reserved [ 0.534301] system 00:06: [mem 0xa0000000-0xa0000fff] has been reserved [ 0.534441] system 00:06: [mem 0xa0020000-0xa002ffff] has been reserved [ 0.535458] pnp: PnP ACPI: found 7 devices [ 0.557063] PM-Timer failed consistency check (0xffffff) - aborting. [ 0.557263] NET: Registered PF_INET protocol family [ 0.557433] IP idents hash table entries: 8192 (order: 4, 65536 bytes, linear) [ 0.557765] tcp_listen_portaddr_hash hash table entries: 256 (order: 0, 4096 bytes, linear) [ 0.557951] Table-perturb hash table entries: 65536 (order: 6, 262144 bytes, linear) [ 0.558138] TCP established hash table entries: 4096 (order: 3, 32768 bytes, linear) [ 0.558338] TCP bind hash table entries: 4096 (order: 5, 131072 bytes, linear) [ 0.558529] TCP: Hash tables configured (established 4096 bind 4096) [ 0.558687] UDP hash table entries: 256 (order: 1, 8192 bytes, linear) [ 0.558835] UDP-Lite hash table entries: 256 (order: 1, 8192 bytes, linear) [ 0.559008] NET: Registered PF_UNIX/PF_LOCAL protocol family [ 0.559320] RPC: Registered named UNIX socket transport module. [ 0.559464] RPC: Registered udp transport module. [ 0.559603] RPC: Registered tcp transport module. [ 0.559743] RPC: Registered tcp NFSv4.1 backchannel transport module. [ 0.560153] clipped [mem size 0x00020000] to [mem size 0xfffffffffffc0000] for e820 entry [mem 0x0009f000-0x000fffff] [ 0.560336] pci 0000:00:1c.0: BAR 14: assigned [mem 0xa0100000-0xa01fffff] [ 0.560483] pci 0000:01:00.0: BAR 6: assigned [mem 0xa0100000-0xa013ffff pref] [ 0.560656] pci 0000:01:00.1: BAR 6: assigned [mem 0xa0140000-0xa017ffff pref] [ 0.560829] pci 0000:00:1c.0: PCI bridge to [bus 01] [ 0.560998] pci 0000:00:1c.0: bridge window [mem 0xa0100000-0xa01fffff] [ 0.561150] pci 0000:00:1c.0: bridge window [mem 0xa2a00000-0xa2afffff 64bit pref] [ 0.561342] pci 0000:04:00.0: PCI bridge to [bus 05] [ 0.561621] pci 0000:04:00.0: bridge window [mem 0xa2000000-0xa28fffff] [ 0.561861] pci 0000:04:00.0: bridge window [mem 0xa1000000-0xa1ffffff 64bit pref] [ 0.562241] pci 0000:03:00.0: PCI bridge to [bus 04-05] [ 0.562527] pci 0000:03:00.0: bridge window [mem 0xa2000000-0xa28fffff] [ 0.562758] pci 0000:03:00.0: bridge window [mem 0xa1000000-0xa1ffffff 64bit pref] [ 0.563133] pci 0000:03:01.0: PCI bridge to [bus 06] [ 0.563431] pci 0000:03:01.0: bridge window [mem 0xa2900000-0xa29fffff] [ 0.563930] pci 0000:02:00.0: PCI bridge to [bus 03-06] [ 0.564202] pci 0000:02:00.0: bridge window [mem 0xa2000000-0xa29fffff] [ 0.564437] pci 0000:02:00.0: bridge window [mem 0xa1000000-0xa1ffffff 64bit pref] [ 0.564861] pci 0000:00:1c.2: PCI bridge to [bus 02-06] [ 0.565020] pci 0000:00:1c.2: bridge window [mem 0xa2000000-0xa29fffff] [ 0.565169] pci 0000:00:1c.2: bridge window [mem 0xa1000000-0xa1ffffff 64bit pref] [ 0.565361] pci_bus 0000:00: resource 4 [io 0x0000-0x0cf7 window] [ 0.565506] pci_bus 0000:00: resource 5 [io 0x0d00-0xffff window] [ 0.565650] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff window] [ 0.565796] pci_bus 0000:00: resource 7 [mem 0xa0000000-0xfeafffff window] [ 0.565945] pci_bus 0000:01: resource 1 [mem 0xa0100000-0xa01fffff] [ 0.566090] pci_bus 0000:01: resource 2 [mem 0xa2a00000-0xa2afffff 64bit pref] [ 0.566262] pci_bus 0000:02: resource 1 [mem 0xa2000000-0xa29fffff] [ 0.566405] pci_bus 0000:02: resource 2 [mem 0xa1000000-0xa1ffffff 64bit pref] [ 0.566573] pci_bus 0000:03: resource 1 [mem 0xa2000000-0xa29fffff] [ 0.566717] pci_bus 0000:03: resource 2 [mem 0xa1000000-0xa1ffffff 64bit pref] [ 0.566895] pci_bus 0000:04: resource 1 [mem 0xa2000000-0xa28fffff] [ 0.567034] pci_bus 0000:04: resource 2 [mem 0xa1000000-0xa1ffffff 64bit pref] [ 0.567209] pci_bus 0000:05: resource 1 [mem 0xa2000000-0xa28fffff] [ 0.567353] pci_bus 0000:05: resource 2 [mem 0xa1000000-0xa1ffffff 64bit pref] [ 0.567525] pci_bus 0000:06: resource 1 [mem 0xa2900000-0xa29fffff] [ 0.567804] xen: registering gsi 16 triggering 0 polarity 1 [ 0.567823] xen: --> pirq=16 -> irq=16 (gsi=16) [ 0.569272] xen: registering gsi 16 triggering 0 polarity 1 [ 0.569276] Already setup the GSI :16 [ 0.581002] pci 0000:00:1a.0: quirk_usb_early_handoff+0x0/0x720 took 11505 usecs [ 0.581252] xen: registering gsi 23 triggering 0 polarity 1 [ 0.581265] xen: --> pirq=23 -> irq=23 (gsi=23) [ 0.592997] pci 0000:00:1d.0: quirk_usb_early_handoff+0x0/0x720 took 11518 usecs [ 0.593479] PCI: CLS 64 bytes, default 64 [ 0.593621] PCI-DMA: Using software bounce buffering for IO (SWIOTLB) [ 0.593669] Unpacking initramfs... [ 0.593766] software IO TLB: mapped [mem 0x000000001b180000-0x000000001f180000] (64MB) [ 0.594172] kvm: no hardware support for 'kvm_intel' [ 0.594315] has_svm: not amd or hygon [ 0.594459] kvm: no hardware support for 'kvm_amd' [ 0.594595] clocksource: tsc: mask: 0xffffffffffffffff max_cycles: 0x2c94d83b270, max_idle_ns: 440795286026 ns [ 0.594823] clocksource: Switched to clocksource tsc [ 0.601549] Initialise system trusted keyrings [ 0.601804] workingset: timestamp_bits=62 max_order=17 bucket_order=0 [ 0.602928] NFS: Registering the id_resolver key type [ 0.603080] Key type id_resolver registered [ 0.603212] Key type id_legacy registered [ 0.603395] 9p: Installing v9fs 9p2000 file system support [ 0.613427] Key type asymmetric registered [ 0.613590] Asymmetric key parser 'x509' registered [ 0.613751] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 251) [ 0.613932] io scheduler mq-deadline registered [ 0.614066] io scheduler kyber registered [ 0.614611] xen: registering gsi 16 triggering 0 polarity 1 [ 0.614621] Already setup the GSI :16 [ 0.614973] pcieport 0000:00:1c.0: PME: Signaling with IRQ 50 [ 0.615358] xen: registering gsi 18 triggering 0 polarity 1 [ 0.615374] xen: --> pirq=18 -> irq=18 (gsi=18) [ 0.615565] pcieport 0000:00:1c.2: PME: Signaling with IRQ 51 [ 0.619937] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input0 [ 0.620182] ACPI: button: Power Button [PWRF] [ 0.620750] Monitor-Mwait will be used to enter C-1 state [ 0.620780] Monitor-Mwait will be used to enter C-2 state [ 0.620791] ACPI: \_PR_.CPU0: Found 2 idle states [ 0.621107] ACPI: \_PR_.CPU1: Found 2 idle states [ 0.633037] ACPI: \_PR_.CPU2: Found 2 idle states [ 0.633550] ACPI: \_PR_.CPU3: Found 2 idle states [ 0.634174] thermal LNXTHERM:00: registered as thermal_zone0 [ 0.634322] ACPI: thermal: Thermal Zone [TZ00] (28 C) [ 0.634705] thermal LNXTHERM:01: registered as thermal_zone1 [ 0.634850] ACPI: thermal: Thermal Zone [TZ01] (30 C) [ 0.635254] xen:xen_evtchn: Event-channel device installed [ 0.635454] xen_pciback: backend is vpci [ 0.636009] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled [ 0.636252] 00:04: ttyS1 at I/O 0x2f8 (irq = 3, base_baud = 115200) is a 16550A [ 0.636903] hpet_acpi_add: no address or irqs in _CRS [ 0.637096] Non-volatile memory driver v1.3 [ 0.637233] AMD-Vi: AMD IOMMUv2 functionality not available on this system - This is not a bug. [ 0.638647] loop: module loaded [ 0.642162] ahci 0000:00:1f.2: version 3.0 [ 0.642255] xen: registering gsi 19 triggering 0 polarity 1 [ 0.642275] xen: --> pirq=19 -> irq=19 (gsi=19) [ 0.642430] ahci 0000:00:1f.2: SSS flag set, parallel bus scan disabled [ 0.642633] ahci 0000:00:1f.2: AHCI 0001.0300 32 slots 6 ports 6 Gbps 0x31 impl SATA mode [ 0.642811] ahci 0000:00:1f.2: flags: 64bit ncq stag pm led clo pio slum part ems sxs apst [ 0.648955] scsi host0: ahci [ 0.649295] scsi host1: ahci [ 0.649605] scsi host2: ahci [ 0.649874] scsi host3: ahci [ 0.650155] scsi host4: ahci [ 0.650410] scsi host5: ahci [ 0.650590] ata1: SATA max UDMA/133 abar m2048@0xa2b10000 port 0xa2b10100 irq 53 [ 0.650762] ata2: DUMMY [ 0.650893] ata3: DUMMY [ 0.651023] ata4: DUMMY [ 0.651154] ata5: SATA max UDMA/133 abar m2048@0xa2b10000 port 0xa2b10300 irq 53 [ 0.651330] ata6: SATA max UDMA/133 abar m2048@0xa2b10000 port 0xa2b10380 irq 53 [ 0.651673] tun: Universal TUN/TAP device driver, 1.6 [ 0.651990] xen: registering gsi 16 triggering 0 polarity 1 [ 0.651995] Already setup the GSI :16 [ 0.667463] Freeing initrd memory: 19884K [ 0.686044] tg3 0000:01:00.0 eth0: Tigon3 [partno(BCM95720) rev 5720000] (PCI Express) MAC address 54:9f:35:05:fd:88 [ 0.686234] tg3 0000:01:00.0 eth0: attached PHY is 5720C (10/100/1000Base-T Ethernet) (WireSpeed[1], EEE[1]) [ 0.686417] tg3 0000:01:00.0 eth0: RXcsums[1] LinkChgREG[0] MIirq[0] ASF[1] TSOcap[1] [ 0.686601] tg3 0000:01:00.0 eth0: dma_rwctrl[00000001] dma_mask[64-bit] [ 0.687142] xen: registering gsi 17 triggering 0 polarity 1 [ 0.687164] xen: --> pirq=17 -> irq=17 (gsi=17) [ 0.735413] tg3 0000:01:00.1 eth1: Tigon3 [partno(BCM95720) rev 5720000] (PCI Express) MAC address 54:9f:35:05:fd:8a [ 0.735614] tg3 0000:01:00.1 eth1: attached PHY is 5720C (10/100/1000Base-T Ethernet) (WireSpeed[1], EEE[1]) [ 0.735800] tg3 0000:01:00.1 eth1: RXcsums[1] LinkChgREG[0] MIirq[0] ASF[1] TSOcap[1] [ 0.735974] tg3 0000:01:00.1 eth1: dma_rwctrl[00000001] dma_mask[64-bit] [ 0.736412] e100: Intel(R) PRO/100 Network Driver [ 0.736558] e100: Copyright(c) 1999-2006 Intel Corporation [ 0.736708] sky2: driver version 1.30 [ 0.736869] xen_netfront: Initialising Xen virtual ethernet driver [ 0.737171] xen: registering gsi 16 triggering 0 polarity 1 [ 0.737176] Already setup the GSI :16 [ 0.737371] ehci-pci 0000:00:1a.0: EHCI Host Controller [ 0.737589] ehci-pci 0000:00:1a.0: new USB bus registered, assigned bus number 1 [ 0.737793] ehci-pci 0000:00:1a.0: debug port 2 [ 0.741942] ehci-pci 0000:00:1a.0: irq 16, io mem 0xa2b12000 [ 0.748506] ehci-pci 0000:00:1a.0: USB 2.0 started, EHCI 1.00 [ 0.748712] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 6.01 [ 0.748885] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 0.749053] usb usb1: Product: EHCI Host Controller [ 0.749192] usb usb1: Manufacturer: Linux 6.1.94+ ehci_hcd [ 0.749334] usb usb1: SerialNumber: 0000:00:1a.0 [ 0.749602] hub 1-0:1.0: USB hub found [ 0.749754] hub 1-0:1.0: 2 ports detected [ 0.750107] xen: registering gsi 23 triggering 0 polarity 1 [ 0.750111] Already setup the GSI :23 [ 0.750297] ehci-pci 0000:00:1d.0: EHCI Host Controller [ 0.750521] ehci-pci 0000:00:1d.0: new USB bus registered, assigned bus number 2 [ 0.750722] ehci-pci 0000:00:1d.0: debug port 2 [ 0.754866] ehci-pci 0000:00:1d.0: irq 23, io mem 0xa2b11000 [ 0.761540] ehci-pci 0000:00:1d.0: USB 2.0 started, EHCI 1.00 [ 0.761791] usb usb2: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 6.01 [ 0.761970] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 0.762146] usb usb2: Product: EHCI Host Controller [ 0.762281] usb usb2: Manufacturer: Linux 6.1.94+ ehci_hcd [ 0.762421] usb usb2: SerialNumber: 0000:00:1d.0 [ 0.762734] hub 2-0:1.0: USB hub found [ 0.762882] hub 2-0:1.0: 2 ports detected [ 0.763264] xen: registering gsi 16 triggering 0 polarity 1 [ 0.763268] Already setup the GSI :16 [ 0.763466] xhci_hcd 0000:00:14.0: xHCI Host Controller [ 0.763687] xhci_hcd 0000:00:14.0: new USB bus registered, assigned bus number 3 [ 0.764940] xhci_hcd 0000:00:14.0: hcc params 0x200077c1 hci version 0x100 quirks 0x0000000000009810 [ 0.765373] xhci_hcd 0000:00:14.0: xHCI Host Controller [ 0.765584] xhci_hcd 0000:00:14.0: new USB bus registered, assigned bus number 4 [ 0.765761] xhci_hcd 0000:00:14.0: Host supports USB 3.0 SuperSpeed [ 0.765967] usb usb3: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 6.01 [ 0.766145] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 0.766311] usb usb3: Product: xHCI Host Controller [ 0.766451] usb usb3: Manufacturer: Linux 6.1.94+ xhci-hcd [ 0.766603] usb usb3: SerialNumber: 0000:00:14.0 [ 0.766890] hub 3-0:1.0: USB hub found [ 0.767047] hub 3-0:1.0: 10 ports detected [ 0.770417] usb usb4: New USB device found, idVendor=1d6b, idProduct=0003, bcdDevice= 6.01 [ 0.770605] usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 0.770779] usb usb4: Product: xHCI Host Controller [ 0.770920] usb usb4: Manufacturer: Linux 6.1.94+ xhci-hcd [ 0.771062] usb usb4: SerialNumber: 0000:00:14.0 [ 0.771389] hub 4-0:1.0: USB hub found [ 0.771574] hub 4-0:1.0: 2 ports detected [ 0.772119] usbcore: registered new interface driver usblp [ 0.772274] usbcore: registered new interface driver usb-storage [ 0.772439] i8042: PNP: No PS/2 controller found. [ 0.772695] rtc_cmos 00:02: RTC can wake from S4 [ 0.773279] rtc_cmos 00:02: registered as rtc0 [ 0.773461] rtc_cmos 00:02: alarms up to one month, 242 bytes nvram [ 0.773659] device-mapper: uevent: version 1.0.3 [ 0.773714] xen: registering gsi 18 triggering 0 polarity 1 [ 0.773797] Already setup the GSI :18 [ 0.773874] device-mapper: ioctl: 4.47.0-ioctl (2022-07-28) initialised: dm-devel@redhat.com [ 0.774042] i801_smbus 0000:00:1f.3: SMBus using PCI interrupt [ 0.774105] intel_pstate: CPU model not supported [ 0.774388] hid: raw HID events driver (C) Jiri Kosina [ 0.774639] usbcore: registered new interface driver usbhid [ 0.774780] usbhid: USB HID core driver [ 0.775191] Initializing XFRM netlink socket [ 0.775396] NET: Registered PF_INET6 protocol family [ 0.775905] Segment Routing with IPv6 [ 0.776048] In-situ OAM (IOAM) with IPv6 [ 0.776217] sit: IPv6, IPv4 and MPLS over IPv4 tunneling driver [ 0.776438] NET: Registered PF_PACKET protocol family [ 0.776623] 9pnet: Installing 9P2000 support [ 0.776775] Key type dns_resolver registered [ 0.777126] IPI shorthand broadcast: enabled [ 0.777284] sched_clock: Marking stable (726614825, 50481336)->(783204606, -6108445) [ 0.777734] registered taskstats version 1 [ 0.777872] Loading compiled-in X.509 certificates [ 0.778813] i2c i2c-0: 1/4 memory slots populated (from DMI) [ 0.779391] PM: Magic number: 12:35:726 [ 0.779461] i2c i2c-0: Successfully instantiated SPD at 0x51 [ 0.779550] block loop6: hash matches [ 0.779837] tg3 0000:01:00.1: hash matches [ 0.780007] printk: console [netcon0] enabled [ 0.780146] netconsole: network logging started [ 0.780464] cfg80211: Loading compiled-in X.509 certificates for regulatory database [ 0.788249] cfg80211: Loaded X.509 cert 'sforshee: 00b28ddf47aef9cea7' [ 0.788564] cfg80211: Loaded X.509 cert 'wens: 61c038651aabdcf94bd0ac7ff06c7248db18c600' [ 0.789122] cfg80211: loaded regulatory.db is malformed or signature is missing/invalid [ 0.789318] ALSA device list: [ 0.789458] No soundcards found. [ 0.956858] ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300) [ 0.992538] usb 1-1: new high-speed USB device number 2 using ehci-pci [ 1.000538] usb 2-1: new high-speed USB device number 2 using ehci-pci [ 1.007367] ata1.00: ATA-8: TOSHIBA MG03ACA100, FL1D, max UDMA/100 [ 1.008232] ata1.00: 1953525168 sectors, multi 16: LBA48 NCQ (depth 32), AA [ 1.008537] usb 3-9: new high-speed USB device number 2 using xhci_hcd [ 1.009381] ata1.00: configured for UDMA/100 [ 1.009661] scsi 0:0:0:0: Direct-Access ATA TOSHIBA MG03ACA1 FL1D PQ: 0 ANSI: 5 [ 1.010436] sd 0:0:0:0: [sda] 1953525168 512-byte logical blocks: (1.00 TB/932 GiB) [ 1.010471] sd 0:0:0:0: Attached scsi generic sg0 type 0 [ 1.010649] sd 0:0:0:0: [sda] Write Protect is off [ 1.010997] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00 [ 1.011041] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 1.011268] sd 0:0:0:0: [sda] Preferred minimum I/O size 512 bytes [ 1.121222] usb 1-1: New USB device found, idVendor=8087, idProduct=8008, bcdDevice= 0.05 [ 1.121394] usb 1-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0 [ 1.132959] hub 1-1:1.0: USB hub found [ 1.133116] usb 2-1: New USB device found, idVendor=8087, idProduct=8000, bcdDevice= 0.05 [ 1.133284] usb 2-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0 [ 1.133535] hub 1-1:1.0: 4 ports detected [ 1.133707] hub 2-1:1.0: USB hub found [ 1.133925] hub 2-1:1.0: 6 ports detected [ 1.145586] usb 3-9: New USB device found, idVendor=0624, idProduct=0248, bcdDevice= 0.00 [ 1.145757] usb 3-9: New USB device strings: Mfr=1, Product=2, SerialNumber=3 [ 1.145894] usb 3-9: Product: Gadget USB HUB [ 1.146024] usb 3-9: Manufacturer: no manufacturer [ 1.146153] usb 3-9: SerialNumber: 0123456789 [ 1.147153] hub 3-9:1.0: USB hub found [ 1.147387] hub 3-9:1.0: 6 ports detected [ 1.199272] sda: sda1 sda2 < sda5 > [ 1.199726] sd 0:0:0:0: [sda] Attached SCSI disk [ 1.316748] ata5: SATA link up 1.5 Gbps (SStatus 113 SControl 300) [ 1.319589] ata5.00: ATAPI: HL-DT-ST DVD+/-RW GTA0N, A3B0, max UDMA/100 [ 1.324359] ata5.00: configured for UDMA/100 [ 1.329568] scsi 4:0:0:0: CD-ROM HL-DT-ST DVD+-RW GTA0N A3B0 PQ: 0 ANSI: 5 [ 1.370103] sr 4:0:0:0: [sr0] scsi3-mmc drive: 24x/24x writer dvd-ram cd/rw xa/form2 cdda tray [ 1.370284] cdrom: Uniform CD-ROM driver Revision: 3.20 [ 1.389961] sr 4:0:0:0: Attached scsi CD-ROM sr0 [ 1.390032] sr 4:0:0:0: Attached scsi generic sg1 type 5 [ 1.440508] usb 3-9.1: new high-speed USB device number 3 using xhci_hcd [ 1.527906] usb 3-9.1: New USB device found, idVendor=0624, idProduct=0249, bcdDevice= 0.00 [ 1.528087] usb 3-9.1: New USB device strings: Mfr=4, Product=5, SerialNumber=6 [ 1.528261] usb 3-9.1: Product: Keyboard/Mouse Function [ 1.528403] usb 3-9.1: Manufacturer: Avocent [ 1.528549] usb 3-9.1: SerialNumber: 20120917 [ 1.535702] input: Avocent Keyboard/Mouse Function as /devices/pci0000:00/0000:00:14.0/usb3/3-9/3-9.1/3-9.1:1.0/0003:0624:0249.0001/input/input1 [ 1.587720] hid-generic 0003:0624:0249.0001: input,hidraw0: USB HID v1.00 Keyboard [Avocent Keyboard/Mouse Function] on usb-0000:00:14.0-9.1/input0 [ 1.588952] input: Avocent Keyboard/Mouse Function as /devices/pci0000:00/0000:00:14.0/usb3/3-9/3-9.1/3-9.1:1.1/0003:0624:0249.0002/input/input2 [ 1.589325] hid-generic 0003:0624:0249.0002: input,hidraw1: USB HID v1.00 Mouse [Avocent Keyboard/Mouse Function] on usb-0000:00:14.0-9.1/input1 [ 1.590385] input: Avocent Keyboard/Mouse Function as /devices/pci0000:00/0000:00:14.0/usb3/3-9/3-9.1/3-9.1:1.2/0003:0624:0249.0003/input/input3 [ 1.590724] hid-generic 0003:0624:0249.0003: input,hidraw2: USB HID v1.00 Mouse [Avocent Keyboard/Mouse Function] on usb-0000:00:14.0-9.1/input2 [ 1.700802] ata6: SATA link down (SStatus 0 SControl 300) [ 1.701692] Freeing unused kernel image (initmem) memory: 1576K [ 1.701841] Write protecting the kernel read-only data: 22528k [ 1.714400] Freeing unused kernel image (text/rodata gap) memory: 2032K [ 1.715314] Freeing unused kernel image (rodata/data gap) memory: 1568K [ 1.908984] x86/mm: Checked W+X mappings: passed, no W+X pages found. [ 1.909132] Run /init as init process [ 1.909266] with arguments: [ 1.909267] /init [ 1.909268] placeholder [ 1.909269] with environment: [ 1.909269] HOME=/ [ 1.909270] TERM=linux [ 2.135035] tg3 0000:01:00.0 enx549f3505fd88: renamed from eth0 [ 2.150783] tg3 0000:01:00.1 enx549f3505fd8a: renamed from eth1 [ 2.848721] EXT4-fs (dm-0): mounting ext3 file system using the ext4 subsystem [ 3.082584] EXT4-fs (dm-0): mounted filesystem with ordered data mode. Quota mode: none. [ 6.438428] EXT4-fs (dm-0): re-mounted. Quota mode: none. [ 7.288352] EXT4-fs (sda1): mounting ext3 file system using the ext4 subsystem [ 7.302433] EXT4-fs (sda1): mounted filesystem with ordered data mode. Quota mode: none. [ 7.375023] Adding 1949692k swap on /dev/mapper/godello1--vg-swap_1. Priority:-2 extents:1 across:1949692k [ 8.871720] xenbr0: port 1(enx549f3505fd88) entered blocking state [ 8.871909] xenbr0: port 1(enx549f3505fd88) entered disabled state [ 8.872092] device enx549f3505fd88 entered promiscuous mode [ 12.564782] tg3 0000:01:00.0 enx549f3505fd88: Link is up at 1000 Mbps, full duplex [ 12.564995] tg3 0000:01:00.0 enx549f3505fd88: Flow control is off for TX and off for RX [ 12.565173] tg3 0000:01:00.0 enx549f3505fd88: EEE is disabled [ 12.565385] IPv6: ADDRCONF(NETDEV_CHANGE): enx549f3505fd88: link becomes ready [ 12.565596] xenbr0: port 1(enx549f3505fd88) entered blocking state [ 12.565741] xenbr0: port 1(enx549f3505fd88) entered forwarding state [ 12.565897] IPv6: ADDRCONF(NETDEV_CHANGE): xenbr0: link becomes ready