[ 0.000000] Booting Linux on physical CPU 0x0 [ 0.000000] Linux version 6.1.94+ (osstest@himrod1) (arm-linux-gnueabihf-gcc (Debian 12.2.0-14) 12.2.0, GNU ld (GNU Binutils for Debian) 2.40) #1 SMP Thu Jun 20 07:49:49 UTC 2024 [ 0.000000] CPU: ARMv7 Processor [410fc0f4] revision 4 (ARMv7), cr=10c5387d [ 0.000000] CPU: div instructions available: patching division code [ 0.000000] CPU: PIPT / VIPT nonaliasing data cache, PIPT instruction cache [ 0.000000] OF: fdt: Machine model: Insignal Arndale evaluation board based on Exynos5250 [ 0.000000] Memory policy: Data cache writealloc [ 0.000000] Xen 4.19 support found [ 0.000000] efi: UEFI not found. [ 0.000000] cma: Reserved 64 MiB at 0x7c000000 [ 0.000000] Samsung CPU ID: 0x43520010 [ 0.000000] Zone ranges: [ 0.000000] DMA [mem 0x0000000060000000-0x000000007fffffff] [ 0.000000] Normal empty [ 0.000000] HighMem empty [ 0.000000] Movable zone start for each node [ 0.000000] Early memory node ranges [ 0.000000] node 0: [mem 0x0000000060000000-0x000000007fffffff] [ 0.000000] Initmem setup node 0 [mem 0x0000000060000000-0x000000007fffffff] [ 0.000000] psci: probing for conduit method from DT. [ 0.000000] psci: PSCIv1.1 detected in firmware. [ 0.000000] psci: Using standard PSCI v0.2 function IDs [ 0.000000] psci: Trusted OS migration not required [ 0.000000] psci: SMC Calling Convention v1.2 [ 0.000000] percpu: Embedded 16 pages/cpu s35412 r8192 d21932 u65536 [ 0.000000] pcpu-alloc: s35412 r8192 d21932 u65536 alloc=16*4096 [ 0.000000] pcpu-alloc: [0] 0 [0] 1 [ 0.000000] Built 1 zonelists, mobility grouping on. Total pages: 130048 [ 0.000000] Kernel command line: ro root=/dev/mapper/arndale--lakeside--vg-root rootdelay=3 ro root=/dev/mapper/arndale--lakeside--vg-root rootdelay=3 console=hvc0 clk_ignore_unused clk_ignore_unused [ 0.000000] Dentry cache hash table entries: 65536 (order: 6, 262144 bytes, linear) [ 0.000000] Inode-cache hash table entries: 32768 (order: 5, 131072 bytes, linear) [ 0.000000] mem auto-init: stack:all(zero), heap alloc:off, heap free:off [ 0.000000] Memory: 416852K/524288K available (14336K kernel code, 2180K rwdata, 5600K rodata, 2048K init, 438K bss, 41900K reserved, 65536K cma-reserved, 0K highmem) [ 0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=2, Nodes=1 [ 0.000000] trace event string verifier disabled [ 0.000000] rcu: Hierarchical RCU implementation. [ 0.000000] rcu: RCU event tracing is enabled. [ 0.000000] rcu: RCU restricting CPUs from NR_CPUS=16 to nr_cpu_ids=2. [ 0.000000] rcu: RCU calculated value of scheduler-enlistment delay is 10 jiffies. [ 0.000000] rcu: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=2 [ 0.000000] NR_IRQS: 16, nr_irqs: 16, preallocated irqs: 16 [ 0.000000] rcu: srcu_init: Setting srcu_struct sizes based on contention. [ 0.000000] Exynos5250: clock setup completed, armclk=1000000000 [ 0.000000] arch_timer: cp15 timer(s) running at 24.00MHz (virt). [ 0.000000] clocksource: arch_sys_counter: mask: 0xffffffffffffff max_cycles: 0x588fe9dc0, max_idle_ns: 440795202592 ns [ 0.000001] sched_clock: 56 bits at 24MHz, resolution 41ns, wraps every 4398046511097ns [ 0.000012] Switching to timer-based delay loop, resolution 41ns [ 0.000490] Console: colour dummy device 80x30 [ 0.292866] printk: console [hvc0] enabled [ 0.297059] Calibrating delay loop (skipped), value calculated using timer frequency.. 48.00 BogoMIPS (lpj=240000) [ 0.307459] CPU: Testing write buffer coherency: ok [ 0.312401] CPU0: Spectre v2: firmware did not set auxiliary control register IBE bit, system vulnerable [ 0.321954] CPU0: Spectre BHB: enabling loop workaround for all CPUs [ 0.328367] pid_max: default: 32768 minimum: 301 [ 0.333186] Mount-cache hash table entries: 1024 (order: 0, 4096 bytes, linear) [ 0.340435] Mountpoint-cache hash table entries: 1024 (order: 0, 4096 bytes, linear) [ 0.348844] /cpus/cpu@0 missing clock-frequency property [ 0.353662] /cpus/cpu@1 missing clock-frequency property [ 0.359033] CPU0: thread -1, cpu 0, socket 0, mpidr 80000000 [ 0.365547] xen:grant_table: Grant tables using version 1 layout [ 0.370882] Grant table initialized [ 0.374422] xen:events: Using FIFO-based ABI [ 0.378740] Xen: initializing cpu0 [ 0.382269] Setting up static identity map for 0x60300000 - 0x603000ac [ 0.389989] rcu: Hierarchical SRCU implementation. [ 0.393677] rcu: Max phase no-delay instances is 1000. [ 0.401674] EFI services will not be available. [ 0.404977] smp: Bringing up secondary CPUs ... [ 0.479329] Xen: initializing cpu1 [ 0.479485] CPU1: thread -1, cpu 1, socket 0, mpidr 80000001 [ 0.479514] CPU1: Spectre v2: firmware did not set auxiliary control register IBE bit, system vulnerable [ 0.498386] smp: Brought up 1 node, 2 CPUs [ 0.502159] SMP: Total of 2 processors activated (96.00 BogoMIPS). [ 0.508470] CPU: All CPU(s) started in SVC mode. [ 0.513870] devtmpfs: initialized [ 0.526079] VFP support v0.3: implementor 41 architecture 4 part 30 variant f rev 0 [ 0.532561] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 19112604462750000 ns [ 0.542284] futex hash table entries: 512 (order: 3, 32768 bytes, linear) [ 0.550307] pinctrl core: initialized pinctrl subsystem [ 0.556825] DMI not present or invalid. [ 0.559928] NET: Registered PF_NETLINK/PF_ROUTE protocol family [ 0.567124] DMA: preallocated 256 KiB pool for atomic coherent allocations [ 0.575885] thermal_sys: Registered thermal governor 'step_wise' [ 0.576017] software IO TLB: area num 2. [ 0.584701] software IO TLB: only able to allocate 8 MB [ 0.591848] software IO TLB: mapped [mem 0x63000000-0x63800000] (8MB) [ 0.597027] No ATAGs? [ 0.599376] hw-breakpoint: Failed to enable monitor mode on CPU 0. [ 0.607877] Serial: AMBA PL011 UART driver [ 0.630023] genirq: irq_chip COMBINER did not update eff. affinity mask of irq 62 [ 0.679449] platform panel: Fixed dependency cycle(s) with /soc/dsi@14500000/bridge@0 [ 0.703853] xen:balloon: Initialising balloon driver [ 0.711403] iommu: Default domain type: Translated [ 0.714906] iommu: DMA domain TLB invalidation policy: strict mode [ 0.721855] SCSI subsystem initialized [ 0.725217] libata version 3.00 loaded. [ 0.725406] usbcore: registered new interface driver usbfs [ 0.730654] usbcore: registered new interface driver hub [ 0.736044] usbcore: registered new device driver usb [ 0.742659] s3c-i2c 12c60000.i2c: slave address 0x66 [ 0.746273] s3c-i2c 12c60000.i2c: bus frequency set to 18 KHz [ 0.752585] i2c 0-0066: Fixed dependency cycle(s) with /soc/i2c@12c60000/pmic@66/regulators/BUCK8 [ 0.761023] i2c 0-0066: Fixed dependency cycle(s) with /soc/i2c@12c60000/pmic@66/regulators/BUCK7 [ 0.770158] s3c-i2c 12c60000.i2c: i2c-0: S3C I2C adapter [ 0.775667] s3c-i2c 12c90000.i2c: slave address 0x00 [ 0.780365] s3c-i2c 12c90000.i2c: bus frequency set to 65 KHz [ 0.786613] s3c-i2c 12c90000.i2c: i2c-3: S3C I2C adapter [ 0.791839] s3c-i2c 12ce0000.i2c: slave address 0x00 [ 0.796619] s3c-i2c 12ce0000.i2c: bus frequency set to 65 KHz [ 0.802735] s3c-i2c 12ce0000.i2c: i2c-8: S3C I2C adapter [ 0.807911] s3c-i2c 121d0000.i2c: slave address 0x00 [ 0.812827] s3c-i2c 121d0000.i2c: bus frequency set to 39 KHz [ 0.818882] s3c-i2c 121d0000.i2c: i2c-9: S3C I2C adapter [ 0.824627] pps_core: LinuxPPS API ver. 1 registered [ 0.829088] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti [ 0.838271] PTP clock support registered [ 0.842455] EDAC MC: Ver: 3.0.0 [ 0.847744] vgaarb: loaded [ 0.850997] clocksource: Switched to clocksource arch_sys_counter [ 0.868940] NET: Registered PF_INET protocol family [ 0.872581] IP idents hash table entries: 8192 (order: 4, 65536 bytes, linear) [ 0.880456] tcp_listen_portaddr_hash hash table entries: 512 (order: 0, 4096 bytes, linear) [ 0.888179] Table-perturb hash table entries: 65536 (order: 6, 262144 bytes, linear) [ 0.895998] TCP established hash table entries: 4096 (order: 2, 16384 bytes, linear) [ 0.903822] TCP bind hash table entries: 4096 (order: 4, 65536 bytes, linear) [ 0.911104] TCP: Hash tables configured (established 4096 bind 4096) [ 0.917447] UDP hash table entries: 256 (order: 1, 8192 bytes, linear) [ 0.924024] UDP-Lite hash table entries: 256 (order: 1, 8192 bytes, linear) [ 0.931152] NET: Registered PF_UNIX/PF_LOCAL protocol family [ 0.937603] RPC: Registered named UNIX socket transport module. [ 0.942771] RPC: Registered udp transport module. [ 0.947520] RPC: Registered tcp transport module. [ 0.952308] RPC: Registered tcp NFSv4.1 backchannel transport module. [ 0.958827] PCI: CLS 0 bytes, default 64 [ 0.964139] Initialise system trusted keyrings [ 0.967631] workingset: timestamp_bits=30 max_order=17 bucket_order=0 [ 0.972252] Trying to unpack rootfs image as initramfs... [ 0.981769] squashfs: version 4.0 (2009/01/31) Phillip Lougher [ 0.986724] NFS: Registering the id_resolver key type [ 0.991390] Key type id_resolver registered [ 0.995602] Key type id_legacy registered [ 0.999804] nfs4filelayout_init: NFSv4 File Layout Driver Registering... [ 1.006474] nfs4flexfilelayout_init: NFSv4 Flexfile Layout Driver Registering... [ 1.014179] Key type asymmetric registered [ 1.018087] Asymmetric key parser 'x509' registered [ 1.023235] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 248) [ 1.030499] io scheduler mq-deadline registered [ 1.035124] io scheduler kyber registered [ 1.054351] samsung-pinctrl 11400000.pinctrl: Failed to create device link (0x180) with soc [ 1.102958] dma-pl330 121a0000.dma-controller: Loaded driver for PL330 DMAC-241330 [ 1.109168] dma-pl330 121a0000.dma-controller: DBUFF-32x4bytes Num_Chans-8 Num_Peri-32 Num_Events-32 [ 1.121193] dma-pl330 121b0000.dma-controller: Loaded driver for PL330 DMAC-241330 [ 1.127393] dma-pl330 121b0000.dma-controller: DBUFF-32x4bytes Num_Chans-8 Num_Peri-32 Num_Events-32 [ 1.138051] dma-pl330 10800000.dma-controller: Loaded driver for PL330 DMAC-241330 [ 1.144386] dma-pl330 10800000.dma-controller: DBUFF-64x8bytes Num_Chans-8 Num_Peri-1 Num_Events-32 [ 1.159167] dma-pl330 11c10000.dma-controller: Loaded driver for PL330 DMAC-241330 [ 1.165416] dma-pl330 11c10000.dma-controller: DBUFF-64x8bytes Num_Chans-8 Num_Peri-1 Num_Events-32 [ 1.179377] exynos-chipid 10000000.chipid: Exynos: CPU[EXYNOS5250] PRO_ID[0x43520000] REV[0x10] Detected [ 1.189946] xen:xen_evtchn: Event-channel device installed [ 1.240689] Serial: 8250/16550 driver, 5 ports, IRQ sharing enabled [ 1.250086] 12c00000.serial: ttySAC0 at MMIO 0x12c00000 (irq = 113, base_baud = 0) is a S3C6400/10 [ 1.258244] 12c10000.serial: ttySAC1 at MMIO 0x12c10000 (irq = 114, base_baud = 0) is a S3C6400/10 [ 1.267297] 12c30000.serial: ttySAC3 at MMIO 0x12c30000 (irq = 115, base_baud = 0) is a S3C6400/10 [ 1.276577] SuperH (H)SCI(F) driver initialized [ 1.281403] STMicroelectronics ASC driver initialized [ 1.286692] STM32 USART driver initialized [ 1.291278] exynos-trng 10830600.rng: Exynos True Random Number Generator. [ 1.306603] brd: module loaded [ 1.312505] loop: module loaded [ 1.330744] Invalid max_queues (4), will use default max: 2. [ 1.359963] tun: Universal TUN/TAP device driver, 1.6 [ 1.363876] CAN device driver interface [ 1.368992] bgmac_bcma: Broadcom 47xx GBit MAC driver loaded [ 1.379833] xen_netfront: Initialising Xen virtual ethernet driver [ 1.384766] pegasus: Pegasus/Pegasus II USB Ethernet driver [ 1.390327] usbcore: registered new interface driver pegasus [ 1.396074] usbcore: registered new interface driver asix [ 1.401519] usbcore: registered new interface driver ax88179_178a [ 1.407664] usbcore: registered new interface driver cdc_ether [ 1.413614] usbcore: registered new interface driver smsc75xx [ 1.419414] usbcore: registered new interface driver smsc95xx [ 1.425228] usbcore: registered new interface driver net1080 [ 1.430940] usbcore: registered new interface driver cdc_subset [ 1.436937] usbcore: registered new interface driver zaurus [ 1.442629] usbcore: registered new interface driver cdc_ncm [ 1.452543] usbcore: registered new interface driver usb-storage [ 1.486767] s5m-rtc s5m-rtc: registered as rtc0 [ 1.495517] s5m-rtc s5m-rtc: setting system clock to 2024-06-20T16:11:37 UTC (1718899897) [ 1.504155] i2c_dev: i2c /dev entries driver [ 1.515500] syscon-poweroff 10040000.system-controller:syscon-poweroff: pm_power_off already claimed for psci_sys_poweroff [ 1.525214] syscon-poweroff: probe of 10040000.system-controller:syscon-poweroff failed with error -16 [ 1.536908] exynos-tmu 10060000.tmu: Regulator node (vtmu) not found [ 1.547705] device-mapper: uevent: version 1.0.3 [ 1.551253] device-mapper: ioctl: 4.47.0-ioctl (2022-07-28) initialised: dm-devel@redhat.com [ 1.560317] cpu cpu0: OPP table can't be empty [ 1.565275] failed to register cpuidle driver [ 1.568396] exynos_cpuidle exynos_cpuidle: failed to register cpuidle driver [ 1.576719] sdhci: Secure Digital Host Controller Interface driver [ 1.581791] sdhci: Copyright(c) Pierre Ossman [ 1.590485] sdhci-pltfm: SDHCI platform and OF driver helper [ 1.607551] ledtrig-cpu: registered to indicate activity on CPUs [ 1.613196] SMCCC: SOC_ID: ARCH_SOC_ID not implemented, skipping .... [ 1.619675] usbcore: registered new interface driver usbhid [ 1.624365] usbhid: USB HID core driver [ 1.635258] NET: Registered PF_INET6 protocol family [ 1.671327] Segment Routing with IPv6 [ 1.673658] In-situ OAM (IOAM) with IPv6 [ 1.677675] sit: IPv6, IPv4 and MPLS over IPv4 tunneling driver [ 1.684094] NET: Registered PF_PACKET protocol family [ 1.688764] can: controller area network core [ 1.693207] NET: Registered PF_CAN protocol family [ 1.698013] can: raw protocol [ 1.701066] can: broadcast manager protocol [ 1.705310] can: netlink gateway - max_hops=1 [ 1.709975] Key type dns_resolver registered [ 1.763982] ThumbEE CPU extension supported. [ 1.766893] Registering SWP/SWPB emulation handler [ 1.776779] Loading compiled-in X.509 certificates [ 1.827210] Freeing initrd memory: 11772K [ 1.864466] input: gpio-keys as /devices/platform/gpio-keys/input/input0 [ 1.920458] clk: Not disabling unused clocks [ 1.926777] Freeing unused kernel image (initmem) memory: 2048K [ 1.932925] Run /init as init process [ 1.935231] with arguments: [ 1.935237] /init [ 1.935242] with environment: [ 1.935246] HOME=/ [ 1.935251] TERM=linux [ 3.388269] exynos5_usb3drd_phy 12100000.phy: supply vbus not found, using dummy regulator [ 3.396015] exynos5_usb3drd_phy 12100000.phy: supply vbus-boost not found, using dummy regulator [ 3.435399] samsung-usb2-phy 12130000.phy: supply vbus not found, using dummy regulator [ 3.467357] Synopsys Designware Multimedia Card Interface Driver [ 3.482177] dwmmc_exynos 12220000.mmc: IDMAC supports 32-bit address mode. [ 3.500608] dwmmc_exynos 12220000.mmc: Using internal DMA controller. [ 3.506526] dwmmc_exynos 12220000.mmc: Version ID is 241a [ 3.511531] dwmmc_exynos 12220000.mmc: DW MMC controller at irq 125,32 bit host data width,128 deep fifo [ 3.512103] dwmmc_exynos 12200000.mmc: IDMAC supports 32-bit address mode. [ 3.571640] phy phy-12130000.phy.9: phy_power_on was called before phy_init [ 3.571870] s2mps11-clk s5m8767-clk: DMA mask not set [ 3.577233] exynos-ehci 12110000.usb: EHCI Host Controller [ 3.620632] exynos-ehci 12110000.usb: new USB bus registered, assigned bus number 1 [ 3.642277] dwmmc_exynos 12200000.mmc: Using internal DMA controller. [ 3.643972] mmc_host mmc0: Bus speed (slot 0) = 50000000Hz (slot req 400000Hz, actual 396825HZ div = 63) [ 3.647382] dwmmc_exynos 12200000.mmc: Version ID is 241a [ 3.662499] dwmmc_exynos 12200000.mmc: DW MMC controller at irq 126,32 bit host data width,128 deep fifo [ 3.672890] exynos-ehci 12110000.usb: irq 127, io mem 0x12110000 [ 3.711021] exynos-ehci 12110000.usb: USB 2.0 started, EHCI 1.00 [ 3.716862] hub 1-0:1.0: USB hub found [ 3.717104] ahci-dwc 122f0000.sata: supply ahci not found, using dummy regulator [ 3.719523] hub 1-0:1.0: 3 ports detected [ 3.727254] ahci-dwc 122f0000.sata: supply phy not found, using dummy regulator [ 3.739384] mmc_host mmc1: card is polling. [ 3.754233] mmc_host mmc1: Bus speed (slot 0) = 50000000Hz (slot req 400000Hz, actual 396825HZ div = 63) [ 3.784324] ahci-dwc 122f0000.sata: supply target not found, using dummy regulator [ 3.792734] phy phy-12130000.phy.9: phy_power_on was called before phy_init [ 3.798346] exynos-ohci 12120000.usb: USB Host Controller [ 3.803823] exynos-ohci 12120000.usb: new USB bus registered, assigned bus number 2 [ 3.831219] ahci-dwc 122f0000.sata: SSS flag set, parallel bus scan disabled [ 3.837246] ahci-dwc 122f0000.sata: AHCI 0001.0300 32 slots 1 ports 6 Gbps 0x1 impl platform mode [ 3.846303] ahci-dwc 122f0000.sata: flags: ncq sntf stag pm led clo only pmp pio slum part ccc apst [ 3.863863] mmc_host mmc0: Bus speed (slot 0) = 50000000Hz (slot req 50000000Hz, actual 50000000HZ div = 0) [ 3.865237] i2c-gpio soc:i2c-10: using lines 6 (SDA) and 7 (SCL) [ 3.878403] exynos-ohci 12120000.usb: irq 127, io mem 0x12120000 [ 3.887822] mmc0: new high speed SDHC card at address aaaa [ 3.920021] mmcblk0: mmc0:aaaa SU04G 3.69 GiB [ 3.925279] mmc_host mmc1: Bus speed (slot 0) = 50000000Hz (slot req 52000000Hz, actual 50000000HZ div = 0) [ 3.949436] mmc1: new DDR MMC card at address 0001 [ 3.963218] hub 2-0:1.0: USB hub found [ 3.965916] scsi host0: ahci-dwc [ 3.969141] ata1: SATA max UDMA/133 mmio [mem 0x122f0000-0x122f01fe] port 0x100 irq 128 [ 3.984703] hub 2-0:1.0: 3 ports detected [ 3.991515] mmcblk1: mmc1:0001 M4G1FB 3.64 GiB [ 4.009659] mmcblk1: p1 p2 p3 p4 [ 4.023539] mmcblk1boot0: mmc1:0001 M4G1FB 1.00 MiB [ 4.024940] s3c-rtc 101e0000.rtc: rtc disabled, re-enabling [ 4.041187] s3c-rtc 101e0000.rtc: registered as rtc1 [ 4.041803] mmcblk1boot1: mmc1:0001 M4G1FB 1.00 MiB [ 4.082451] mmcblk1rpmb: mmc1:0001 M4G1FB 128 KiB, chardev (238:0) [ 4.375512] dwc3 12000000.usb: Configuration mismatch. dr_mode forced to host [ 4.387579] xhci-hcd xhci-hcd.2.auto: xHCI Host Controller [ 4.391777] xhci-hcd xhci-hcd.2.auto: new USB bus registered, assigned bus number 3 [ 4.400561] xhci-hcd xhci-hcd.2.auto: hcc params 0x0220f04c hci version 0x100 quirks 0x0000008002010010 [ 4.409257] xhci-hcd xhci-hcd.2.auto: irq 130, io mem 0x12000000 [ 4.415174] xhci-hcd xhci-hcd.2.auto: xHCI Host Controller [ 4.420529] xhci-hcd xhci-hcd.2.auto: new USB bus registered, assigned bus number 4 [ 4.428270] xhci-hcd xhci-hcd.2.auto: Host supports USB 3.0 SuperSpeed [ 4.441170] hub 3-0:1.0: USB hub found [ 4.443598] hub 3-0:1.0: 1 port detected [ 4.448278] usb usb4: We don't know the algorithms for LPM for this host, disabling LPM. [ 4.456499] hub 4-0:1.0: USB hub found [ 4.459555] hub 4-0:1.0: 1 port detected [ 4.481062] ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300) [ 4.487059] ata1.00: ATA-8: HGST HTS545050A7E380, GG2OAC90, max UDMA/133 [ 4.492682] ata1.00: 976773168 sectors, multi 16: LBA48 NCQ (depth 32) [ 4.500426] ata1.00: configured for UDMA/133 [ 4.504966] scsi 0:0:0:0: Direct-Access ATA HGST HTS545050A7 AC90 PQ: 0 ANSI: 5 [ 4.513565] sd 0:0:0:0: [sda] 976773168 512-byte logical blocks: (500 GB/466 GiB) [ 4.519687] sd 0:0:0:0: [sda] 4096-byte physical blocks [ 4.526049] sd 0:0:0:0: [sda] Write Protect is off [ 4.529834] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00 [ 4.529931] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 4.539359] sd 0:0:0:0: [sda] Preferred minimum I/O size 4096 bytes [ 4.580118] sda: sda1 sda2 < sda5 > [ 4.582906] sd 0:0:0:0: [sda] Attached SCSI disk [ 7.161001] random: crng init done [ 11.149907] EXT4-fs (dm-0): mounting ext3 file system using the ext4 subsystem [ 11.439549] EXT4-fs (dm-0): mounted filesystem with ordered data mode. Quota mode: disabled. [ 14.719363] wm8994 3-001a: Device is not a WM8994, ID is 0 [ 14.736359] wm8994: probe of 3-001a failed with error -22 [ 15.378295] s3c2410-wdt 101d0000.watchdog: watchdog inactive, reset disabled, irq disabled [ 15.416481] mc: Linux media interface: v0.10 [ 15.455992] s5p-secss 10830000.sss: s5p-sss driver registered [ 15.506575] videodev: Linux video capture interface: v2.00 [ 15.763310] s5p-mfc 11000000.codec: Adding to iommu group 0 [ 15.820140] s5p-mfc 11000000.codec: preallocated 8 MiB buffer for the firmware and context buffers [ 15.850482] exynos-gsc 13e00000.gsc: Adding to iommu group 1 [ 15.871076] s5p-mfc 11000000.codec: Direct firmware load for s5p-mfc-v6-v2.fw failed with error -2 [ 15.878717] s5p-mfc 11000000.codec: Direct firmware load for s5p-mfc-v6.fw failed with error -2 [ 15.881923] exynos-gsc 13e10000.gsc: Adding to iommu group 2 [ 15.887490] s5p_mfc_load_firmware:69: Firmware is not present in the /lib/firmware directory nor compiled in kernel [ 15.901408] exynos-gsc 13e20000.gsc: Adding to iommu group 3 [ 15.920728] s5p-mfc 11000000.codec: decoder registered as /dev/video2 [ 15.926431] s5p-mfc 11000000.codec: encoder registered as /dev/video3 [ 15.935466] exynos-gsc 13e30000.gsc: Adding to iommu group 4 [ 16.011116] usb3503 usb-hub: switched to HUB mode [ 16.014466] usb3503 usb-hub: usb3503_probe: probed in hub mode [ 16.371247] usb 1-3: new high-speed USB device number 2 using exynos-ehci [ 16.398715] samsung-i2s 3830000.i2s-sec: DMA channels sourced from device 3830000.i2s [ 16.572117] hub 1-3:1.0: USB hub found [ 16.574712] hub 1-3:1.0: 3 ports detected [ 16.709227] s5p-mfc 11000000.codec: Direct firmware load for s5p-mfc-v6-v2.fw failed with error -2 [ 16.717005] s5p-mfc 11000000.codec: Direct firmware load for s5p-mfc-v6.fw failed with error -2 [ 16.725680] s5p_mfc_load_firmware:69: Firmware is not present in the /lib/firmware directory nor compiled in kernel [ 16.739564] s5p-mfc 11000000.codec: Direct firmware load for s5p-mfc-v6-v2.fw failed with error -2 [ 16.747366] s5p-mfc 11000000.codec: Direct firmware load for s5p-mfc-v6.fw failed with error -2 [ 16.755992] s5p_mfc_load_firmware:69: Firmware is not present in the /lib/firmware directory nor compiled in kernel [ 16.901045] usb 1-3.2: new high-speed USB device number 3 using exynos-ehci [ 17.083640] hub 1-3.2:1.0: USB hub found [ 17.086602] hub 1-3.2:1.0: 4 ports detected [ 17.142619] usbcore: registered new device driver onboard-usb-hub [ 17.261793] hub 1-3.2:1.0: USB hub found [ 17.264726] hub 1-3.2:1.0: 4 ports detected [ 17.275672] hub 1-3.2:1.0: USB hub found [ 17.279139] hub 1-3.2:1.0: 4 ports detected [ 17.621071] usb 1-3.2.4: new high-speed USB device number 4 using exynos-ehci [ 17.744478] EXT4-fs (dm-0): re-mounted. Quota mode: disabled. [ 17.794356] asix 1-3.2.4:1.0 (unnamed net_device) (uninitialized): invalid hw address, using random [ 18.513134] asix 1-3.2.4:1.0 (unnamed net_device) (uninitialized): PHY [usb-001:004:10] driver [Asix Electronics AX88772A] (irq=POLL) [ 18.517380] Asix Electronics AX88772A usb-001:004:10: attached PHY driver (mii_bus:phy_addr=usb-001:004:10, irq=POLL) [ 18.517918] asix 1-3.2.4:1.0 eth0: register 'asix' at usb-12110000.usb-3.2.4, ASIX AX88772 USB 2.0 Ethernet, ae:2a:41:f6:98:09 [ 19.931999] EXT4-fs (sda1): mounting ext3 file system using the ext4 subsystem [ 19.983945] EXT4-fs (sda1): mounted filesystem with ordered data mode. Quota mode: disabled. [ 20.080329] Adding 1949692k swap on /dev/mapper/arndale--lakeside--vg-swap_1. Priority:-2 extents:1 across:1949692k [ 21.942511] xenbr0: port 1(eth0) entered blocking state [ 21.946372] xenbr0: port 1(eth0) entered disabled state [ 21.951851] device eth0 entered promiscuous mode [ 21.961883] asix 1-3.2.4:1.0 eth0: configuring for phy/internal link mode [ 24.159764] asix 1-3.2.4:1.0 eth0: Link is Up - 100Mbps/Full - flow control off [ 24.165741] IPv6: ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready [ 24.172113] xenbr0: port 1(eth0) entered blocking state [ 24.177340] xenbr0: port 1(eth0) entered forwarding state [ 24.183165] IPv6: ADDRCONF(NETDEV_CHANGE): xenbr0: link becomes ready