[ 0.000000] Linux version 6.10.0-rc4+ (osstest@himrod2) (gcc (Debian 12.2.0-14) 12.2.0, GNU ld (GNU Binutils for Debian) 2.40) #1 SMP PREEMPT_DYNAMIC Thu Jun 20 20:37:32 UTC 2024 [ 0.000000] Command line: placeholder root=/dev/mapper/debina1--vg-root ro console=hvc0 [ 0.000000] Released 0 page(s) [ 0.000000] BIOS-provided physical RAM map: [ 0.000000] Xen: [mem 0x0000000000000000-0x0000000000099fff] usable [ 0.000000] Xen: [mem 0x000000000009ac00-0x00000000000fffff] reserved [ 0.000000] Xen: [mem 0x0000000000100000-0x0000000020065fff] usable [ 0.000000] Xen: [mem 0x00000000796ef000-0x00000000798bdfff] reserved [ 0.000000] Xen: [mem 0x00000000799b7000-0x0000000079e5afff] ACPI NVS [ 0.000000] Xen: [mem 0x0000000079e5b000-0x000000007bdb0fff] reserved [ 0.000000] Xen: [mem 0x000000007bdb2000-0x000000007be37fff] reserved [ 0.000000] Xen: [mem 0x0000000080000000-0x000000008fffffff] reserved [ 0.000000] Xen: [mem 0x00000000fbffc000-0x00000000fbffcfff] reserved [ 0.000000] Xen: [mem 0x00000000fec00000-0x00000000fec00fff] reserved [ 0.000000] Xen: [mem 0x00000000fed1c000-0x00000000fed1ffff] reserved [ 0.000000] Xen: [mem 0x00000000fee00000-0x00000000feefffff] reserved [ 0.000000] Xen: [mem 0x00000000ff000000-0x00000000ffffffff] reserved [ 0.000000] NX (Execute Disable) protection: active [ 0.000000] APIC: Static calls initialized [ 0.000000] SMBIOS 2.8 present. [ 0.000000] DMI: Supermicro SYS-5018D-FN8T/X10SDV-TP8F, BIOS 1.0b 11/21/2016 [ 0.000000] DMI: Memory slots populated: 1/4 [ 0.000000] Hypervisor detected: Xen PV [ 0.000029] Xen PV: Detected 8 vCPUS [ 0.000489] tsc: Detected 2199.994 MHz processor [ 0.000923] e820: update [mem 0x00000000-0x00000fff] usable ==> reserved [ 0.000926] e820: remove [mem 0x000a0000-0x000fffff] usable [ 0.000933] last_pfn = 0x20066 max_arch_pfn = 0x400000000 [ 0.000936] MTRR map: 2 entries (0 fixed + 2 variable; max 20), built from 10 variable MTRRs [ 0.000938] MTRRs set to read-only [ 0.000941] x86/PAT: Configuration [0-7]: WB WT UC- UC WC WP UC UC [ 0.000982] Kernel/User page tables isolation: disabled on XEN PV. [ 0.026990] RAMDISK: [mem 0x04000000-0x053a5fff] [ 0.026999] ACPI: Early table checksum verification disabled [ 0.027600] ACPI: RSDP 0x00000000000F0580 000024 (v02 SUPERM) [ 0.027612] ACPI: XSDT 0x00000000799FF0A0 0000BC (v01 SUPERM SMCI--MB 01072009 AMI 00010013) [ 0.027649] ACPI: FACP 0x0000000079A17AC8 00010C (v05 SUPERM SMCI--MB 01072009 AMI 00010013) [ 0.027697] ACPI: DSDT 0x00000000799FF1F0 0188D5 (v02 SUPERM SMCI--MB 01072009 INTL 20091013) [ 0.027713] ACPI: FACS 0x0000000079E59F80 000040 [ 0.027729] ACPI: APIC 0x0000000079A17BD8 0000BC (v03 SUPERM SMCI--MB 01072009 AMI 00010013) [ 0.027745] ACPI: FPDT 0x0000000079A17C98 000044 (v01 SUPERM SMCI--MB 01072009 AMI 00010013) [ 0.027761] ACPI: FIDT 0x0000000079A17CE0 00009C (v01 SUPERM SMCI--MB 01072009 AMI 00010013) [ 0.027777] ACPI: SPMI 0x0000000079A17D80 000040 (v05 SUPERM SMCI--MB 00000000 AMI. 00000000) [ 0.027793] ACPI: MCFG 0x0000000079A17DC0 00003C (v01 SUPERM SMCI--MB 01072009 MSFT 00000097) [ 0.027809] ACPI: UEFI 0x0000000079A17E00 000042 (v01 00000000 00000000) [ 0.027825] ACPI: DBG2 0x0000000079A17E48 000072 (v00 SUPERM SMCI--MB 00000000 INTL 20091013) [ 0.027841] ACPI: HPET 0x0000000079A17EC0 000038 (v01 SUPERM SMCI--MB 00000001 INTL 20091013) [ 0.027857] ACPI: WDDT 0x0000000079A17EF8 000040 (v01 SUPERM SMCI--MB 00000000 INTL 20091013) [ 0.027873] ACPI: SSDT 0x0000000079A17F38 00ED8B (v01 AMI PmMgt 00000001 INTL 20120913) [ 0.027889] ACPI: SSDT 0x0000000079A26CC8 002285 (v02 SUPERM SpsNm 00000002 INTL 20120913) [ 0.027905] ACPI: SSDT 0x0000000079A28F50 000064 (v02 SUPERM SpsNvs 00000002 INTL 20120913) [ 0.027921] ACPI: PRAD 0x0000000079A28FB8 000102 (v02 SUPERM SMCI--MB 00000002 INTL 20120913) [ 0.027937] ACPI: RMAD 0x0000000079A290C0 0000CC (v01 SUPERM SMCI--MB 00000001 INTL 20091013) [ 0.027953] ACPI: HEST 0x0000000079A29190 0000A8 (v01 SUPERM SMCI--MB 00000001 INTL 00000001) [ 0.027969] ACPI: BERT 0x0000000079A29238 000030 (v01 SUPERM SMCI--MB 00000001 INTL 00000001) [ 0.027985] ACPI: ERST 0x0000000079A29268 000230 (v01 SUPERM SMCI--MB 00000001 INTL 00000001) [ 0.028001] ACPI: EINJ 0x0000000079A29498 000130 (v01 SUPERM SMCI--MB 00000001 INTL 00000001) [ 0.028009] ACPI: Reserving FACP table memory at [mem 0x79a17ac8-0x79a17bd3] [ 0.028011] ACPI: Reserving DSDT table memory at [mem 0x799ff1f0-0x79a17ac4] [ 0.028012] ACPI: Reserving FACS table memory at [mem 0x79e59f80-0x79e59fbf] [ 0.028013] ACPI: Reserving APIC table memory at [mem 0x79a17bd8-0x79a17c93] [ 0.028014] ACPI: Reserving FPDT table memory at [mem 0x79a17c98-0x79a17cdb] [ 0.028015] ACPI: Reserving FIDT table memory at [mem 0x79a17ce0-0x79a17d7b] [ 0.028016] ACPI: Reserving SPMI table memory at [mem 0x79a17d80-0x79a17dbf] [ 0.028017] ACPI: Reserving MCFG table memory at [mem 0x79a17dc0-0x79a17dfb] [ 0.028018] ACPI: Reserving UEFI table memory at [mem 0x79a17e00-0x79a17e41] [ 0.028019] ACPI: Reserving DBG2 table memory at [mem 0x79a17e48-0x79a17eb9] [ 0.028020] ACPI: Reserving HPET table memory at [mem 0x79a17ec0-0x79a17ef7] [ 0.028021] ACPI: Reserving WDDT table memory at [mem 0x79a17ef8-0x79a17f37] [ 0.028022] ACPI: Reserving SSDT table memory at [mem 0x79a17f38-0x79a26cc2] [ 0.028023] ACPI: Reserving SSDT table memory at [mem 0x79a26cc8-0x79a28f4c] [ 0.028024] ACPI: Reserving SSDT table memory at [mem 0x79a28f50-0x79a28fb3] [ 0.028025] ACPI: Reserving PRAD table memory at [mem 0x79a28fb8-0x79a290b9] [ 0.028025] ACPI: Reserving RMAD table memory at [mem 0x79a290c0-0x79a2918b] [ 0.028026] ACPI: Reserving HEST table memory at [mem 0x79a29190-0x79a29237] [ 0.028027] ACPI: Reserving BERT table memory at [mem 0x79a29238-0x79a29267] [ 0.028028] ACPI: Reserving ERST table memory at [mem 0x79a29268-0x79a29497] [ 0.028029] ACPI: Reserving EINJ table memory at [mem 0x79a29498-0x79a295c7] [ 0.028138] APIC: Switched APIC routing to: Xen PV [ 0.032233] Zone ranges: [ 0.032234] DMA [mem 0x0000000000001000-0x0000000000ffffff] [ 0.032237] DMA32 [mem 0x0000000001000000-0x0000000020065fff] [ 0.032239] Normal empty [ 0.032240] Movable zone start for each node [ 0.032241] Early memory node ranges [ 0.032241] node 0: [mem 0x0000000000001000-0x0000000000099fff] [ 0.032243] node 0: [mem 0x0000000000100000-0x0000000020065fff] [ 0.032245] Initmem setup node 0 [mem 0x0000000000001000-0x0000000020065fff] [ 0.032251] On node 0, zone DMA: 1 pages in unavailable ranges [ 0.032289] On node 0, zone DMA: 102 pages in unavailable ranges [ 0.033768] On node 0, zone DMA32: 32666 pages in unavailable ranges [ 0.033773] p2m virtual area at (____ptrval____), size is 40000000 [ 0.160386] Remapped 102 page(s) [ 0.161769] ACPI: PM-Timer IO Port: 0x408 [ 0.161836] ACPI: LAPIC_NMI (acpi_id[0x00] high level lint[0x1]) [ 0.161839] ACPI: LAPIC_NMI (acpi_id[0x02] high level lint[0x1]) [ 0.161841] ACPI: LAPIC_NMI (acpi_id[0x04] high level lint[0x1]) [ 0.161842] ACPI: LAPIC_NMI (acpi_id[0x06] high level lint[0x1]) [ 0.161844] ACPI: LAPIC_NMI (acpi_id[0x01] high level lint[0x1]) [ 0.161845] ACPI: LAPIC_NMI (acpi_id[0x03] high level lint[0x1]) [ 0.161847] ACPI: LAPIC_NMI (acpi_id[0x05] high level lint[0x1]) [ 0.161848] ACPI: LAPIC_NMI (acpi_id[0x07] high level lint[0x1]) [ 0.161876] IOAPIC[0]: apic_id 8, version 32, address 0xfec00000, GSI 0-23 [ 0.161890] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl) [ 0.161893] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level) [ 0.161919] ACPI: Using ACPI (MADT) for SMP configuration information [ 0.161924] ACPI: HPET id: 0x8086a701 base: 0xfed00000 [ 0.161936] CPU topo: Max. logical packages: 1 [ 0.161937] CPU topo: Max. logical dies: 1 [ 0.161938] CPU topo: Max. dies per package: 1 [ 0.161945] CPU topo: Max. threads per core: 2 [ 0.161946] CPU topo: Num. cores per package: 4 [ 0.161946] CPU topo: Num. threads per package: 8 [ 0.161947] CPU topo: Allowing 8 present CPUs plus 0 hotplug CPUs [ 0.161961] PM: hibernation: Registered nosave memory: [mem 0x00000000-0x00000fff] [ 0.161964] PM: hibernation: Registered nosave memory: [mem 0x0009a000-0x0009afff] [ 0.161965] PM: hibernation: Registered nosave memory: [mem 0x0009b000-0x000fffff] [ 0.161967] [mem 0x90000000-0xfbffbfff] available for PCI devices [ 0.161972] Booting kernel on Xen [ 0.161972] Xen version: 4.19-unstable (preserve-AD) [ 0.161975] clocksource: refined-jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 1910969940391419 ns [ 0.169046] setup_percpu: NR_CPUS:64 nr_cpumask_bits:8 nr_cpu_ids:8 nr_node_ids:1 [ 0.169530] percpu: Embedded 57 pages/cpu s194408 r8192 d30872 u262144 [ 0.169536] pcpu-alloc: s194408 r8192 d30872 u262144 alloc=1*2097152 [ 0.169539] pcpu-alloc: [0] 0 1 2 3 4 5 6 7 [ 0.169611] xen: PV spinlocks enabled [ 0.169614] PV qspinlock hash table entries: 256 (order: 0, 4096 bytes, linear) [ 0.169617] Kernel command line: placeholder root=/dev/mapper/debina1--vg-root ro console=hvc0 [ 0.169657] Unknown kernel command line parameters "placeholder", will be passed to user space. [ 0.169668] random: crng init done [ 0.169745] Dentry cache hash table entries: 65536 (order: 7, 524288 bytes, linear) [ 0.169785] Inode-cache hash table entries: 32768 (order: 6, 262144 bytes, linear) [ 0.171097] Built 1 zonelists, mobility grouping on. Total pages: 131071 [ 0.171100] mem auto-init: stack:all(zero), heap alloc:off, heap free:off [ 0.171102] software IO TLB: area num 8. [ 0.237549] Memory: 385604K/524284K available (16384K kernel code, 2753K rwdata, 6164K rodata, 2680K init, 1864K bss, 138428K reserved, 0K cma-reserved) [ 0.237711] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=8, Nodes=1 [ 0.240330] Dynamic Preempt: voluntary [ 0.240579] rcu: Preemptible hierarchical RCU implementation. [ 0.240580] rcu: RCU event tracing is enabled. [ 0.240580] rcu: RCU restricting CPUs from NR_CPUS=64 to nr_cpu_ids=8. [ 0.240582] Trampoline variant of Tasks RCU enabled. [ 0.240583] rcu: RCU calculated value of scheduler-enlistment delay is 100 jiffies. [ 0.240584] rcu: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=8 [ 0.240619] RCU Tasks: Setting shift to 3 and lim to 1 rcu_task_cb_adjust=1. [ 0.252291] NR_IRQS: 4352, nr_irqs: 488, preallocated irqs: 16 [ 0.252446] xen:events: Using FIFO-based ABI [ 0.252472] xen: --> pirq=1 -> irq=1 (gsi=1) [ 0.252480] xen: --> pirq=2 -> irq=2 (gsi=2) [ 0.252488] xen: --> pirq=3 -> irq=3 (gsi=3) [ 0.252496] xen: --> pirq=4 -> irq=4 (gsi=4) [ 0.252503] xen: --> pirq=5 -> irq=5 (gsi=5) [ 0.252510] xen: --> pirq=6 -> irq=6 (gsi=6) [ 0.252518] xen: --> pirq=7 -> irq=7 (gsi=7) [ 0.252525] xen: --> pirq=8 -> irq=8 (gsi=8) [ 0.252533] xen: --> pirq=9 -> irq=9 (gsi=9) [ 0.252540] xen: --> pirq=10 -> irq=10 (gsi=10) [ 0.252548] xen: --> pirq=11 -> irq=11 (gsi=11) [ 0.252555] xen: --> pirq=12 -> irq=12 (gsi=12) [ 0.252563] xen: --> pirq=13 -> irq=13 (gsi=13) [ 0.252570] xen: --> pirq=14 -> irq=14 (gsi=14) [ 0.252577] xen: --> pirq=15 -> irq=15 (gsi=15) [ 0.252587] rcu: srcu_init: Setting srcu_struct sizes based on contention. [ 0.257945] Console: colour VGA+ 80x25 [ 0.257948] printk: legacy console [tty0] enabled [ 0.274125] printk: legacy console [hvc0] enabled [ 0.275502] ACPI: Core revision 20240322 [ 0.289536] clocksource: xen: mask: 0xffffffffffffffff max_cycles: 0x1cd42e4dffb, max_idle_ns: 881590591483 ns [ 0.289702] Xen: using vcpuop timer interface [ 0.289708] installing Xen timer for CPU 0 [ 0.289857] clocksource: tsc-early: mask: 0xffffffffffffffff max_cycles: 0x1fb62d1c185, max_idle_ns: 440795211487 ns [ 0.290015] Calibrating delay loop (skipped), value calculated using timer frequency.. 4399.98 BogoMIPS (lpj=2199994) [ 0.290341] Last level iTLB entries: 4KB 64, 2MB 8, 4MB 8 [ 0.290457] Last level dTLB entries: 4KB 64, 2MB 0, 4MB 0, 1GB 4 [ 0.290584] Spectre V1 : Mitigation: usercopy/swapgs barriers and __user pointer sanitization [ 0.290732] Spectre V2 : Mitigation: Retpolines [ 0.291022] Spectre V2 : Spectre v2 / SpectreRSB mitigation: Filling RSB on context switch [ 0.291172] Spectre V2 : Spectre v2 / SpectreRSB : Filling RSB on VMEXIT [ 0.291291] Spectre V2 : Enabling Restricted Speculation for firmware calls [ 0.291411] Spectre V2 : mitigation: Enabling conditional Indirect Branch Prediction Barrier [ 0.291558] Spectre V2 : User space: Mitigation: STIBP via prctl [ 0.291676] Speculative Store Bypass: Mitigation: Speculative Store Bypass disabled via prctl [ 0.292023] MDS: Mitigation: Clear CPU buffers [ 0.292136] TAA: Mitigation: Clear CPU buffers [ 0.292249] MMIO Stale Data: Vulnerable: Clear CPU buffers attempted, no microcode [ 0.292411] x86/fpu: Supporting XSAVE feature 0x001: 'x87 floating point registers' [ 0.292556] x86/fpu: Supporting XSAVE feature 0x002: 'SSE registers' [ 0.292674] x86/fpu: Supporting XSAVE feature 0x004: 'AVX registers' [ 0.292793] x86/fpu: xstate_offset[2]: 576, xstate_sizes[2]: 256 [ 0.292912] x86/fpu: Enabled xstate features 0x7, context size is 832 bytes, using 'standard' format. [ 0.315551] Freeing SMP alternatives memory: 40K [ 0.315683] pid_max: default: 32768 minimum: 301 [ 0.315817] LSM: initializing lsm=capability,selinux [ 0.315938] SELinux: Initializing. [ 0.316045] Mount-cache hash table entries: 1024 (order: 1, 8192 bytes, linear) [ 0.316191] Mountpoint-cache hash table entries: 1024 (order: 1, 8192 bytes, linear) [ 0.317103] cpu 0 spinlock event irq 25 [ 0.317220] VPMU disabled by hypervisor. [ 0.317799] Performance Events: unsupported p6 CPU model 86 no PMU driver, software events only. [ 0.317952] signal: max sigframe size: 1776 [ 0.318089] rcu: Hierarchical SRCU implementation. [ 0.318205] rcu: Max phase no-delay instances is 400. [ 0.318815] smp: Bringing up secondary CPUs ... [ 0.319176] installing Xen timer for CPU 1 [ 0.319699] installing Xen timer for CPU 2 [ 0.320241] installing Xen timer for CPU 3 [ 0.038424] [Firmware Bug]: CPU 1: APIC ID mismatch. Firmware: 0x0002 APIC: 0x0001 [ 0.320508] cpu 1 spinlock event irq 45 [ 0.321177] MDS CPU bug present and SMT on, data leak possible. See https://www.kernel.org/doc/html/latest/admin-guide/hw-vuln/mds.html for more details. [ 0.322022] TAA CPU bug present and SMT on, data leak possible. See https://www.kernel.org/doc/html/latest/admin-guide/hw-vuln/tsx_async_abort.html for more details. [ 0.322209] MMIO Stale Data CPU bug present and SMT on, data leak possible. See https://www.kernel.org/doc/html/latest/admin-guide/hw-vuln/processor_mmio_stale_data.html for more details. [ 0.038424] [Firmware Bug]: CPU 2: APIC ID mismatch. Firmware: 0x0004 APIC: 0x0002 [ 0.330019] cpu 2 spinlock event irq 46 [ 0.038424] [Firmware Bug]: CPU 3: APIC ID mismatch. Firmware: 0x0006 APIC: 0x0003 [ 0.330055] cpu 3 spinlock event irq 47 [ 0.331258] installing Xen timer for CPU 4 [ 0.331756] installing Xen timer for CPU 5 [ 0.332232] installing Xen timer for CPU 6 [ 0.332705] installing Xen timer for CPU 7 [ 0.038424] [Firmware Bug]: CPU 4: APIC ID mismatch. Firmware: 0x0001 APIC: 0x0004 [ 0.333076] cpu 4 spinlock event irq 68 [ 0.038424] [Firmware Bug]: CPU 5: APIC ID mismatch. Firmware: 0x0003 APIC: 0x0005 [ 0.333367] cpu 5 spinlock event irq 69 [ 0.038424] [Firmware Bug]: CPU 6: APIC ID mismatch. Firmware: 0x0005 APIC: 0x0006 [ 0.334077] cpu 6 spinlock event irq 70 [ 0.335016] cpu 7 spinlock event irq 71 [ 0.335185] smp: Brought up 1 node, 8 CPUs [ 0.335422] devtmpfs: initialized [ 0.335422] x86/mm: Memory block size: 128MB [ 0.336444] ACPI: PM: Registering ACPI NVS region [mem 0x799b7000-0x79e5afff] (4866048 bytes) [ 0.336444] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 1911260446275000 ns [ 0.336444] futex hash table entries: 2048 (order: 5, 131072 bytes, linear) [ 0.337155] PM: RTC time: 21:11:50, date: 2024-06-20 [ 0.337400] NET: Registered PF_NETLINK/PF_ROUTE protocol family [ 0.337561] xen:grant_table: Grant tables using version 1 layout [ 0.337701] Grant table initialized [ 0.338053] audit: initializing netlink subsys (disabled) [ 0.338187] audit: type=2000 audit(1718917911.024:1): state=initialized audit_enabled=0 res=1 [ 0.338187] thermal_sys: Registered thermal governor 'step_wise' [ 0.338187] thermal_sys: Registered thermal governor 'user_space' [ 0.338231] ACPI FADT declares the system doesn't support PCIe ASPM, so disable it [ 0.339191] PCI: ECAM [mem 0x80000000-0x8fffffff] (base 0x80000000) for domain 0000 [bus 00-ff] [ 0.472950] PCI: Using configuration type 1 for base access [ 0.473081] kprobes: kprobe jump-optimization is enabled. All kprobes are optimized if possible. [ 0.473237] ACPI: Added _OSI(Module Device) [ 0.473237] ACPI: Added _OSI(Processor Device) [ 0.473296] ACPI: Added _OSI(3.0 _SCP Extensions) [ 0.474021] ACPI: Added _OSI(Processor Aggregator Device) [ 0.503806] ACPI: 4 ACPI AML tables successfully acquired and loaded [ 0.505929] xen: registering gsi 9 triggering 0 polarity 0 [ 0.509296] ACPI: Dynamic OEM Table Load: [ 0.512341] ACPI: _OSC evaluated successfully for all CPUs [ 0.512666] ACPI: Interpreter enabled [ 0.512792] ACPI: PM: (supports S0 S4 S5) [ 0.512903] ACPI: Using IOAPIC for interrupt routing [ 0.513058] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug [ 0.513208] PCI: Using E820 reservations for host bridge windows [ 0.513790] ACPI: Enabled 6 GPEs in block 00 to 3F [ 0.538528] ACPI: PCI Root Bridge [UNC0] (domain 0000 [bus ff]) [ 0.538657] acpi PNP0A03:03: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI HPX-Type3] [ 0.538891] acpi PNP0A03:03: _OSC: platform does not support [LTR] [ 0.539166] acpi PNP0A03:03: _OSC: OS now controls [PME PCIeCapability] [ 0.539289] acpi PNP0A03:03: FADT indicates ASPM is unsupported, using BIOS configuration [ 0.539468] PCI host bridge to bus 0000:ff [ 0.539588] pci_bus 0000:ff: root bus resource [bus ff] [ 0.539782] pci 0000:ff:0b.0: [8086:6f81] type 00 class 0x088000 conventional PCI endpoint [ 0.540280] pci 0000:ff:0b.1: [8086:6f36] type 00 class 0x110100 conventional PCI endpoint [ 0.540740] pci 0000:ff:0b.2: [8086:6f37] type 00 class 0x110100 conventional PCI endpoint [ 0.541214] pci 0000:ff:0b.3: [8086:6f76] type 00 class 0x088000 conventional PCI endpoint [ 0.541689] pci 0000:ff:0c.0: [8086:6fe0] type 00 class 0x088000 conventional PCI endpoint [ 0.542160] pci 0000:ff:0c.1: [8086:6fe1] type 00 class 0x088000 conventional PCI endpoint [ 0.542628] pci 0000:ff:0c.2: [8086:6fe2] type 00 class 0x088000 conventional PCI endpoint [ 0.543084] pci 0000:ff:0c.3: [8086:6fe3] type 00 class 0x088000 conventional PCI endpoint [ 0.543578] pci 0000:ff:0f.0: [8086:6ff8] type 00 class 0x088000 conventional PCI endpoint [ 0.544051] pci 0000:ff:0f.4: [8086:6ffc] type 00 class 0x088000 conventional PCI endpoint [ 0.544514] pci 0000:ff:0f.5: [8086:6ffd] type 00 class 0x088000 conventional PCI endpoint [ 0.544969] pci 0000:ff:0f.6: [8086:6ffe] type 00 class 0x088000 conventional PCI endpoint [ 0.545345] pci 0000:ff:10.0: [8086:6f1d] type 00 class 0x088000 conventional PCI endpoint [ 0.545801] pci 0000:ff:10.1: [8086:6f34] type 00 class 0x110100 conventional PCI endpoint [ 0.546288] pci 0000:ff:10.5: [8086:6f1e] type 00 class 0x088000 conventional PCI endpoint [ 0.546770] pci 0000:ff:10.6: [8086:6f7d] type 00 class 0x110100 conventional PCI endpoint [ 0.547237] pci 0000:ff:10.7: [8086:6f1f] type 00 class 0x088000 conventional PCI endpoint [ 0.547731] pci 0000:ff:12.0: [8086:6fa0] type 00 class 0x088000 conventional PCI endpoint [ 0.548019] pci 0000:ff:12.1: [8086:6f30] type 00 class 0x110100 conventional PCI endpoint [ 0.548526] pci 0000:ff:13.0: [8086:6fa8] type 00 class 0x088000 conventional PCI endpoint [ 0.549035] pci 0000:ff:13.1: [8086:6f71] type 00 class 0x088000 conventional PCI endpoint [ 0.549570] pci 0000:ff:13.2: [8086:6faa] type 00 class 0x088000 conventional PCI endpoint [ 0.550086] pci 0000:ff:13.3: [8086:6fab] type 00 class 0x088000 conventional PCI endpoint [ 0.550590] pci 0000:ff:13.4: [8086:6fac] type 00 class 0x088000 conventional PCI endpoint [ 0.551106] pci 0000:ff:13.5: [8086:6fad] type 00 class 0x088000 conventional PCI endpoint [ 0.551600] pci 0000:ff:13.6: [8086:6fae] type 00 class 0x088000 conventional PCI endpoint [ 0.552065] pci 0000:ff:13.7: [8086:6faf] type 00 class 0x088000 conventional PCI endpoint [ 0.552543] pci 0000:ff:14.0: [8086:6fb0] type 00 class 0x088000 conventional PCI endpoint [ 0.553042] pci 0000:ff:14.1: [8086:6fb1] type 00 class 0x088000 conventional PCI endpoint [ 0.553562] pci 0000:ff:14.2: [8086:6fb2] type 00 class 0x088000 conventional PCI endpoint [ 0.554067] pci 0000:ff:14.3: [8086:6fb3] type 00 class 0x088000 conventional PCI endpoint [ 0.554607] pci 0000:ff:14.4: [8086:6fbc] type 00 class 0x088000 conventional PCI endpoint [ 0.555071] pci 0000:ff:14.5: [8086:6fbd] type 00 class 0x088000 conventional PCI endpoint [ 0.555541] pci 0000:ff:14.6: [8086:6fbe] type 00 class 0x088000 conventional PCI endpoint [ 0.555998] pci 0000:ff:14.7: [8086:6fbf] type 00 class 0x088000 conventional PCI endpoint [ 0.557341] pci 0000:ff:15.0: [8086:6fb4] type 00 class 0x088000 conventional PCI endpoint [ 0.558375] pci 0000:ff:15.1: [8086:6fb5] type 00 class 0x088000 conventional PCI endpoint [ 0.558888] pci 0000:ff:15.2: [8086:6fb6] type 00 class 0x088000 conventional PCI endpoint [ 0.559373] pci 0000:ff:15.3: [8086:6fb7] type 00 class 0x088000 conventional PCI endpoint [ 0.559935] pci 0000:ff:1e.0: [8086:6f98] type 00 class 0x088000 conventional PCI endpoint [ 0.560340] pci 0000:ff:1e.1: [8086:6f99] type 00 class 0x088000 conventional PCI endpoint [ 0.560799] pci 0000:ff:1e.2: [8086:6f9a] type 00 class 0x088000 conventional PCI endpoint [ 0.561263] pci 0000:ff:1e.3: [8086:6fc0] type 00 class 0x088000 conventional PCI endpoint [ 0.561555] pci 0000:ff:1e.4: [8086:6f9c] type 00 class 0x088000 conventional PCI endpoint [ 0.562033] pci 0000:ff:1f.0: [8086:6f88] type 00 class 0x088000 conventional PCI endpoint [ 0.562508] pci 0000:ff:1f.2: [8086:6f8a] type 00 class 0x088000 conventional PCI endpoint [ 0.562966] pci_bus 0000:ff: on NUMA node 0 [ 0.567272] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-fe]) [ 0.567411] acpi PNP0A08:00: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI HPX-Type3] [ 0.567685] acpi PNP0A08:00: _OSC: platform does not support [PME LTR] [ 0.568031] acpi PNP0A08:00: _OSC: OS now controls [PCIeCapability] [ 0.568152] acpi PNP0A08:00: FADT indicates ASPM is unsupported, using BIOS configuration [ 0.568668] PCI host bridge to bus 0000:00 [ 0.568782] pci_bus 0000:00: root bus resource [io 0x0000-0x0cf7 window] [ 0.568904] pci_bus 0000:00: root bus resource [io 0x1000-0xffff window] [ 0.569019] pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff window] [ 0.569163] pci_bus 0000:00: root bus resource [mem 0x90000000-0xfbffbfff window] [ 0.569307] pci_bus 0000:00: root bus resource [bus 00-fe] [ 0.569502] pci 0000:00:00.0: [8086:6f00] type 00 class 0x060000 PCIe Root Port [ 0.570196] pci 0000:00:01.0: [8086:6f02] type 01 class 0x060400 PCIe Root Port [ 0.570509] pci 0000:00:01.0: PCI bridge to [bus 01] [ 0.570926] pci 0000:00:01.0: PME# supported from D0 D3hot D3cold [ 0.571284] pci 0000:00:01.1: [8086:6f03] type 01 class 0x060400 PCIe Root Port [ 0.571591] pci 0000:00:01.1: PCI bridge to [bus 02] [ 0.572007] pci 0000:00:01.1: PME# supported from D0 D3hot D3cold [ 0.572425] pci 0000:00:02.0: [8086:6f04] type 01 class 0x060400 PCIe Root Port [ 0.572725] pci 0000:00:02.0: PCI bridge to [bus 03] [ 0.572863] pci 0000:00:02.0: bridge window [mem 0xfb500000-0xfb5fffff] [ 0.573257] pci 0000:00:02.0: PME# supported from D0 D3hot D3cold [ 0.573641] pci 0000:00:02.2: [8086:6f06] type 01 class 0x060400 PCIe Root Port [ 0.573941] pci 0000:00:02.2: PCI bridge to [bus 04] [ 0.574042] pci 0000:00:02.2: bridge window [mem 0xfb400000-0xfb4fffff] [ 0.574207] pci 0000:00:02.2: bridge window [mem 0xfba00000-0xfbefffff 64bit pref] [ 0.574591] pci 0000:00:02.2: PME# supported from D0 D3hot D3cold [ 0.574985] pci 0000:00:03.0: [8086:6f08] type 01 class 0x060400 PCIe Root Port [ 0.575173] pci 0000:00:03.0: PCI bridge to [bus 05] [ 0.575605] pci 0000:00:03.0: PME# supported from D0 D3hot D3cold [ 0.575988] pci 0000:00:03.2: [8086:6f0a] type 01 class 0x060400 PCIe Root Port [ 0.576184] pci 0000:00:03.2: PCI bridge to [bus 06] [ 0.576600] pci 0000:00:03.2: PME# supported from D0 D3hot D3cold [ 0.576983] pci 0000:00:05.0: [8086:6f28] type 00 class 0x088000 PCIe Root Complex Integrated Endpoint [ 0.578485] pci 0000:00:05.1: [8086:6f29] type 00 class 0x088000 PCIe Root Complex Integrated Endpoint [ 0.579170] pci 0000:00:05.2: [8086:6f2a] type 00 class 0x088000 PCIe Root Complex Integrated Endpoint [ 0.579877] pci 0000:00:14.0: [8086:8c31] type 00 class 0x0c0330 conventional PCI endpoint [ 0.580122] pci 0000:00:14.0: BAR 0 [mem 0xfb600000-0xfb60ffff 64bit] [ 0.580586] pci 0000:00:14.0: PME# supported from D3hot D3cold [ 0.580941] pci 0000:00:16.0: [8086:8c3a] type 00 class 0x078000 conventional PCI endpoint [ 0.581117] pci 0000:00:16.0: BAR 0 [mem 0xfb617000-0xfb61700f 64bit] [ 0.581586] pci 0000:00:16.0: PME# supported from D0 D3hot D3cold [ 0.581897] pci 0000:00:16.1: [8086:8c3b] type 00 class 0x078000 conventional PCI endpoint [ 0.582117] pci 0000:00:16.1: BAR 0 [mem 0xfb616000-0xfb61600f 64bit] [ 0.582582] pci 0000:00:16.1: PME# supported from D0 D3hot D3cold [ 0.582962] pci 0000:00:1a.0: [8086:8c2d] type 00 class 0x0c0320 conventional PCI endpoint [ 0.583096] pci 0000:00:1a.0: BAR 0 [mem 0xfb614000-0xfb6143ff] [ 0.583632] pci 0000:00:1a.0: PME# supported from D0 D3hot D3cold [ 0.583975] pci 0000:00:1c.0: [8086:8c10] type 01 class 0x060400 PCIe Root Port [ 0.584181] pci 0000:00:1c.0: PCI bridge to [bus 07] [ 0.584311] pci 0000:00:1c.0: bridge window [io 0xe000-0xefff] [ 0.584439] pci 0000:00:1c.0: bridge window [mem 0xfb300000-0xfb3fffff] [ 0.584866] pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold [ 0.585069] pci 0000:00:1c.0: Enabling MPC IRBNCE [ 0.585191] pci 0000:00:1c.0: Intel PCH root port ACS workaround enabled [ 0.585501] pci 0000:00:1c.1: [8086:8c12] type 01 class 0x060400 PCIe Root Port [ 0.585821] pci 0000:00:1c.1: PCI bridge to [bus 08] [ 0.585951] pci 0000:00:1c.1: bridge window [io 0xd000-0xdfff] [ 0.586029] pci 0000:00:1c.1: bridge window [mem 0xfb200000-0xfb2fffff] [ 0.586455] pci 0000:00:1c.1: PME# supported from D0 D3hot D3cold [ 0.586656] pci 0000:00:1c.1: Enabling MPC IRBNCE [ 0.586788] pci 0000:00:1c.1: Intel PCH root port ACS workaround enabled [ 0.587090] pci 0000:00:1c.3: [8086:8c16] type 01 class 0x060400 PCIe Root Port [ 0.587398] pci 0000:00:1c.3: PCI bridge to [bus 09-0a] [ 0.587529] pci 0000:00:1c.3: bridge window [io 0xc000-0xcfff] [ 0.587660] pci 0000:00:1c.3: bridge window [mem 0xfa000000-0xfb0fffff] [ 0.588098] pci 0000:00:1c.3: PME# supported from D0 D3hot D3cold [ 0.588300] pci 0000:00:1c.3: Enabling MPC IRBNCE [ 0.588421] pci 0000:00:1c.3: Intel PCH root port ACS workaround enabled [ 0.588734] pci 0000:00:1c.4: [8086:8c18] type 01 class 0x060400 PCIe Root Port [ 0.589042] pci 0000:00:1c.4: PCI bridge to [bus 0b] [ 0.589172] pci 0000:00:1c.4: bridge window [io 0xb000-0xbfff] [ 0.589300] pci 0000:00:1c.4: bridge window [mem 0xfb100000-0xfb1fffff] [ 0.589740] pci 0000:00:1c.4: PME# supported from D0 D3hot D3cold [ 0.589938] pci 0000:00:1c.4: Enabling MPC IRBNCE [ 0.590026] pci 0000:00:1c.4: Intel PCH root port ACS workaround enabled [ 0.590361] pci 0000:00:1d.0: [8086:8c26] type 00 class 0x0c0320 conventional PCI endpoint [ 0.590587] pci 0000:00:1d.0: BAR 0 [mem 0xfb613000-0xfb6133ff] [ 0.591139] pci 0000:00:1d.0: PME# supported from D0 D3hot D3cold [ 0.591470] pci 0000:00:1f.0: [8086:8c54] type 00 class 0x060100 conventional PCI endpoint [ 0.592278] pci 0000:00:1f.2: [8086:8c02] type 00 class 0x010601 conventional PCI endpoint [ 0.592501] pci 0000:00:1f.2: BAR 0 [io 0xf070-0xf077] [ 0.592663] pci 0000:00:1f.2: BAR 1 [io 0xf060-0xf063] [ 0.592827] pci 0000:00:1f.2: BAR 2 [io 0xf050-0xf057] [ 0.592984] pci 0000:00:1f.2: BAR 3 [io 0xf040-0xf043] [ 0.593060] pci 0000:00:1f.2: BAR 4 [io 0xf020-0xf03f] [ 0.593217] pci 0000:00:1f.2: BAR 5 [mem 0xfb612000-0xfb6127ff] [ 0.593535] pci 0000:00:1f.2: PME# supported from D3hot [ 0.593835] pci 0000:00:1f.3: [8086:8c22] type 00 class 0x0c0500 conventional PCI endpoint [ 0.594083] pci 0000:00:1f.3: BAR 0 [mem 0xfb611000-0xfb6110ff 64bit] [ 0.594328] pci 0000:00:1f.3: BAR 4 [io 0xf000-0xf01f] [ 0.594729] pci 0000:00:1f.6: [8086:8c24] type 00 class 0x118000 conventional PCI endpoint [ 0.594984] pci 0000:00:1f.6: BAR 0 [mem 0xfb610000-0xfb610fff 64bit] [ 0.595638] pci 0000:00:01.0: PCI bridge to [bus 01] [ 0.595941] pci 0000:00:01.1: PCI bridge to [bus 02] [ 0.596251] pci 0000:03:00.0: [8086:6f50] type 00 class 0x088000 PCIe Endpoint [ 0.596501] pci 0000:03:00.0: BAR 0 [mem 0xfb506000-0xfb507fff 64bit] [ 0.597276] pci 0000:03:00.1: [8086:6f51] type 00 class 0x088000 PCIe Endpoint [ 0.597533] pci 0000:03:00.1: BAR 0 [mem 0xfb504000-0xfb505fff 64bit] [ 0.598260] pci 0000:03:00.2: [8086:6f52] type 00 class 0x088000 PCIe Endpoint [ 0.598512] pci 0000:03:00.2: BAR 0 [mem 0xfb502000-0xfb503fff 64bit] [ 0.599237] pci 0000:03:00.3: [8086:6f53] type 00 class 0x088000 PCIe Endpoint [ 0.599478] pci 0000:03:00.3: BAR 0 [mem 0xfb500000-0xfb501fff 64bit] [ 0.600200] pci 0000:00:02.0: PCI bridge to [bus 03] [ 0.600581] pci 0000:04:00.0: [8086:15ac] type 00 class 0x020000 PCIe Endpoint [ 0.600821] pci 0000:04:00.0: BAR 0 [mem 0xfbc00000-0xfbdfffff 64bit pref] [ 0.601086] pci 0000:04:00.0: BAR 4 [mem 0xfbe04000-0xfbe07fff 64bit pref] [ 0.601247] pci 0000:04:00.0: ROM [mem 0xfb480000-0xfb4fffff pref] [ 0.601610] pci 0000:04:00.0: PME# supported from D0 D3hot D3cold [ 0.601833] pci 0000:04:00.0: VF BAR 0 [mem 0x00000000-0x00003fff 64bit] [ 0.601954] pci 0000:04:00.0: VF BAR 0 [mem 0x00000000-0x000fffff 64bit]: contains BAR 0 for 64 VFs [ 0.602069] pci 0000:04:00.0: VF BAR 3 [mem 0x00000000-0x00003fff 64bit] [ 0.602190] pci 0000:04:00.0: VF BAR 3 [mem 0x00000000-0x000fffff 64bit]: contains BAR 3 for 64 VFs [ 0.602784] pci 0000:04:00.1: [8086:15ac] type 00 class 0x020000 PCIe Endpoint [ 0.603026] pci 0000:04:00.1: BAR 0 [mem 0xfba00000-0xfbbfffff 64bit pref] [ 0.603288] pci 0000:04:00.1: BAR 4 [mem 0xfbe00000-0xfbe03fff 64bit pref] [ 0.603460] pci 0000:04:00.1: ROM [mem 0xfb400000-0xfb47ffff pref] [ 0.603811] pci 0000:04:00.1: PME# supported from D0 D3hot D3cold [ 0.604018] pci 0000:04:00.1: VF BAR 0 [mem 0x00000000-0x00003fff 64bit] [ 0.604144] pci 0000:04:00.1: VF BAR 0 [mem 0x00000000-0x000fffff 64bit]: contains BAR 0 for 64 VFs [ 0.604353] pci 0000:04:00.1: VF BAR 3 [mem 0x00000000-0x00003fff 64bit] [ 0.604481] pci 0000:04:00.1: VF BAR 3 [mem 0x00000000-0x000fffff 64bit]: contains BAR 3 for 64 VFs [ 0.606434] pci 0000:00:02.2: PCI bridge to [bus 04] [ 0.606743] pci 0000:00:03.0: PCI bridge to [bus 05] [ 0.607061] pci 0000:00:03.2: PCI bridge to [bus 06] [ 0.607441] pci 0000:07:00.0: working around ROM BAR overlap defect [ 0.607567] pci 0000:07:00.0: [8086:1533] type 00 class 0x020000 PCIe Endpoint [ 0.607809] pci 0000:07:00.0: BAR 0 [mem 0xfb300000-0xfb37ffff] [ 0.608026] pci 0000:07:00.0: BAR 2 [io 0xe000-0xe01f] [ 0.608191] pci 0000:07:00.0: BAR 3 [mem 0xfb380000-0xfb383fff] [ 0.608728] pci 0000:07:00.0: PME# supported from D0 D3hot D3cold [ 0.609214] pci 0000:00:1c.0: PCI bridge to [bus 07] [ 0.609600] pci 0000:08:00.0: working around ROM BAR overlap defect [ 0.609720] pci 0000:08:00.0: [8086:1533] type 00 class 0x020000 PCIe Endpoint [ 0.609965] pci 0000:08:00.0: BAR 0 [mem 0xfb200000-0xfb27ffff] [ 0.610116] pci 0000:08:00.0: BAR 2 [io 0xd000-0xd01f] [ 0.610281] pci 0000:08:00.0: BAR 3 [mem 0xfb280000-0xfb283fff] [ 0.610826] pci 0000:08:00.0: PME# supported from D0 D3hot D3cold [ 0.611305] pci 0000:00:1c.1: PCI bridge to [bus 08] [ 0.611674] pci 0000:09:00.0: [1a03:1150] type 01 class 0x060400 PCIe to PCI/PCI-X bridge [ 0.612010] pci 0000:09:00.0: PCI bridge to [bus 0a] [ 0.612156] pci 0000:09:00.0: bridge window [io 0xc000-0xcfff] [ 0.612286] pci 0000:09:00.0: bridge window [mem 0xfa000000-0xfb0fffff] [ 0.612526] pci 0000:09:00.0: enabling Extended Tags [ 0.612885] pci 0000:09:00.0: supports D1 D2 [ 0.612999] pci 0000:09:00.0: PME# supported from D0 D1 D2 D3hot D3cold [ 0.613266] pci 0000:00:1c.3: PCI bridge to [bus 09-0a] [ 0.613585] pci_bus 0000:0a: extended config space not accessible [ 0.613770] pci 0000:0a:00.0: [1a03:2000] type 00 class 0x030000 conventional PCI endpoint [ 0.614011] pci 0000:0a:00.0: BAR 0 [mem 0xfa000000-0xfaffffff] [ 0.614176] pci 0000:0a:00.0: BAR 1 [mem 0xfb000000-0xfb01ffff] [ 0.614342] pci 0000:0a:00.0: BAR 2 [io 0xc000-0xc07f] [ 0.614706] pci 0000:0a:00.0: Video device with shadowed ROM at [mem 0x000c0000-0x000dffff] [ 0.614996] pci 0000:0a:00.0: supports D1 D2 [ 0.615018] pci 0000:0a:00.0: PME# supported from D0 D1 D2 D3hot D3cold [ 0.615468] pci 0000:09:00.0: PCI bridge to [bus 0a] [ 0.615922] pci 0000:0b:00.0: [8086:1521] type 00 class 0x020000 PCIe Endpoint [ 0.616100] pci 0000:0b:00.0: BAR 0 [mem 0xfb160000-0xfb17ffff] [ 0.616309] pci 0000:0b:00.0: BAR 2 [io 0xb060-0xb07f] [ 0.616470] pci 0000:0b:00.0: BAR 3 [mem 0xfb18c000-0xfb18ffff] [ 0.617008] pci 0000:0b:00.0: PME# supported from D0 D3hot D3cold [ 0.617250] pci 0000:0b:00.0: VF BAR 0 [mem 0x00000000-0x00003fff 64bit pref] [ 0.617374] pci 0000:0b:00.0: VF BAR 0 [mem 0x00000000-0x0001ffff 64bit pref]: contains BAR 0 for 8 VFs [ 0.617597] pci 0000:0b:00.0: VF BAR 3 [mem 0x00000000-0x00003fff 64bit pref] [ 0.617720] pci 0000:0b:00.0: VF BAR 3 [mem 0x00000000-0x0001ffff 64bit pref]: contains BAR 3 for 8 VFs [ 0.618307] pci 0000:0b:00.1: [8086:1521] type 00 class 0x020000 PCIe Endpoint [ 0.618545] pci 0000:0b:00.1: BAR 0 [mem 0xfb140000-0xfb15ffff] [ 0.618754] pci 0000:0b:00.1: BAR 2 [io 0xb040-0xb05f] [ 0.618915] pci 0000:0b:00.1: BAR 3 [mem 0xfb188000-0xfb18bfff] [ 0.619421] pci 0000:0b:00.1: PME# supported from D0 D3hot D3cold [ 0.619658] pci 0000:0b:00.1: VF BAR 0 [mem 0x00000000-0x00003fff 64bit pref] [ 0.619781] pci 0000:0b:00.1: VF BAR 0 [mem 0x00000000-0x0001ffff 64bit pref]: contains BAR 0 for 8 VFs [ 0.619995] pci 0000:0b:00.1: VF BAR 3 [mem 0x00000000-0x00003fff 64bit pref] [ 0.620018] pci 0000:0b:00.1: VF BAR 3 [mem 0x00000000-0x0001ffff 64bit pref]: contains BAR 3 for 8 VFs [ 0.620563] pci 0000:0b:00.2: [8086:1521] type 00 class 0x020000 PCIe Endpoint [ 0.620790] pci 0000:0b:00.2: BAR 0 [mem 0xfb120000-0xfb13ffff] [ 0.620999] pci 0000:0b:00.2: BAR 2 [io 0xb020-0xb03f] [ 0.621064] pci 0000:0b:00.2: BAR 3 [mem 0xfb184000-0xfb187fff] [ 0.621593] pci 0000:0b:00.2: PME# supported from D0 D3hot D3cold [ 0.621830] pci 0000:0b:00.2: VF BAR 0 [mem 0x00000000-0x00003fff 64bit pref] [ 0.621953] pci 0000:0b:00.2: VF BAR 0 [mem 0x00000000-0x0001ffff 64bit pref]: contains BAR 0 for 8 VFs [ 0.622083] pci 0000:0b:00.2: VF BAR 3 [mem 0x00000000-0x00003fff 64bit pref] [ 0.622205] pci 0000:0b:00.2: VF BAR 3 [mem 0x00000000-0x0001ffff 64bit pref]: contains BAR 3 for 8 VFs [ 0.622748] pci 0000:0b:00.3: [8086:1521] type 00 class 0x020000 PCIe Endpoint [ 0.622975] pci 0000:0b:00.3: BAR 0 [mem 0xfb100000-0xfb11ffff] [ 0.623111] pci 0000:0b:00.3: BAR 2 [io 0xb000-0xb01f] [ 0.623281] pci 0000:0b:00.3: BAR 3 [mem 0xfb180000-0xfb183fff] [ 0.623799] pci 0000:0b:00.3: PME# supported from D0 D3hot D3cold [ 0.624030] pci 0000:0b:00.3: VF BAR 0 [mem 0x00000000-0x00003fff 64bit pref] [ 0.624157] pci 0000:0b:00.3: VF BAR 0 [mem 0x00000000-0x0001ffff 64bit pref]: contains BAR 0 for 8 VFs [ 0.624378] pci 0000:0b:00.3: VF BAR 3 [mem 0x00000000-0x00003fff 64bit pref] [ 0.624527] pci 0000:0b:00.3: VF BAR 3 [mem 0x00000000-0x0001ffff 64bit pref]: contains BAR 3 for 8 VFs [ 0.625114] pci 0000:00:1c.4: PCI bridge to [bus 0b] [ 0.625279] pci 0000:00:1c.4: bridge has subordinate 0b but max busn 0c [ 0.625826] pci_bus 0000:00: on NUMA node 0 [ 0.625926] xen: registering gsi 13 triggering 1 polarity 0 [ 0.626895] ACPI: PCI: Interrupt link LNKA configured for IRQ 11 [ 0.627094] ACPI: PCI: Interrupt link LNKB configured for IRQ 10 [ 0.627299] ACPI: PCI: Interrupt link LNKC configured for IRQ 5 [ 0.627487] ACPI: PCI: Interrupt link LNKD configured for IRQ 11 [ 0.627675] ACPI: PCI: Interrupt link LNKE configured for IRQ 0 [ 0.627793] ACPI: PCI: Interrupt link LNKE disabled [ 0.627975] ACPI: PCI: Interrupt link LNKF configured for IRQ 0 [ 0.628018] ACPI: PCI: Interrupt link LNKF disabled [ 0.628213] ACPI: PCI: Interrupt link LNKG configured for IRQ 0 [ 0.628332] ACPI: PCI: Interrupt link LNKG disabled [ 0.628519] ACPI: PCI: Interrupt link LNKH configured for IRQ 0 [ 0.628637] ACPI: PCI: Interrupt link LNKH disabled [ 0.628923] xen:balloon: Initialising balloon driver [ 0.630120] iommu: Default domain type: Translated [ 0.630238] iommu: DMA domain TLB invalidation policy: lazy mode [ 0.630425] SCSI subsystem initialized [ 0.630553] libata version 3.00 loaded. [ 0.630553] ACPI: bus type USB registered [ 0.630553] usbcore: registered new interface driver usbfs [ 0.631031] usbcore: registered new interface driver hub [ 0.631154] usbcore: registered new device driver usb [ 0.631281] pps_core: LinuxPPS API ver. 1 registered [ 0.631396] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti [ 0.631546] PTP clock support registered [ 0.631685] Advanced Linux Sound Architecture Driver Initialized. [ 0.632236] NetLabel: Initializing [ 0.632350] NetLabel: domain hash size = 128 [ 0.632463] NetLabel: protocols = UNLABELED CIPSOv4 CALIPSO [ 0.632595] NetLabel: unlabeled traffic allowed by default [ 0.632734] PCI: Using ACPI for IRQ routing [ 0.669523] PCI: pci_cache_line_size set to 64 bytes [ 0.670311] e820: reserve RAM buffer [mem 0x0009a000-0x0009ffff] [ 0.670314] e820: reserve RAM buffer [mem 0x20066000-0x23ffffff] [ 0.670340] pci 0000:0a:00.0: vgaarb: setting as boot VGA device [ 0.670340] pci 0000:0a:00.0: vgaarb: bridge control possible [ 0.670340] pci 0000:0a:00.0: vgaarb: VGA device added: decodes=io+mem,owns=io+mem,locks=none [ 0.670455] vgaarb: loaded [ 0.671254] clocksource: Switched to clocksource tsc-early [ 0.671478] VFS: Disk quotas dquot_6.6.0 [ 0.671596] VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes) [ 0.671749] hugetlbfs: disabling because there are no supported hugepage sizes [ 0.671904] pnp: PnP ACPI init [ 0.672190] xen: registering gsi 8 triggering 1 polarity 0 [ 0.672392] system 00:01: [io 0x0500-0x057f] has been reserved [ 0.672518] system 00:01: [io 0x0400-0x047f] has been reserved [ 0.672637] system 00:01: [io 0x0580-0x059f] has been reserved [ 0.672755] system 00:01: [io 0x0600-0x061f] has been reserved [ 0.672835] system 00:01: [io 0x0880-0x0883] has been reserved [ 0.672835] system 00:01: [io 0x0800-0x081f] has been reserved [ 0.673139] system 00:01: [mem 0xfed1c000-0xfed3ffff] could not be reserved [ 0.673261] system 00:01: [mem 0xfed45000-0xfed8bfff] has been reserved [ 0.673381] system 00:01: [mem 0xff000000-0xffffffff] has been reserved [ 0.673500] system 00:01: [mem 0xfee00000-0xfeefffff] has been reserved [ 0.673620] system 00:01: [mem 0xfed12000-0xfed1200f] has been reserved [ 0.673739] system 00:01: [mem 0xfed12010-0xfed1201f] has been reserved [ 0.673859] system 00:01: [mem 0xfed1b000-0xfed1bfff] has been reserved [ 0.674275] system 00:02: [io 0x0a00-0x0a0f] has been reserved [ 0.674396] system 00:02: [io 0x0a10-0x0a1f] has been reserved [ 0.674522] system 00:02: [io 0x0a20-0x0a2f] has been reserved [ 0.674640] system 00:02: [io 0x0a30-0x0a3f] has been reserved [ 0.674758] system 00:02: [io 0x0a40-0x0a4f] has been reserved [ 0.675177] xen: registering gsi 4 triggering 1 polarity 0 [ 0.675182] Already setup the GSI :4 [ 0.675293] pnp 00:03: [dma 0 disabled] [ 0.675597] xen: registering gsi 3 triggering 1 polarity 0 [ 0.675608] pnp 00:04: [dma 0 disabled] [ 0.676177] pnp: PnP ACPI: found 5 devices [ 0.708218] PM-Timer failed consistency check (0xffffff) - aborting. [ 0.708404] NET: Registered PF_INET protocol family [ 0.708553] IP idents hash table entries: 8192 (order: 4, 65536 bytes, linear) [ 0.708898] tcp_listen_portaddr_hash hash table entries: 256 (order: 0, 4096 bytes, linear) [ 0.709075] Table-perturb hash table entries: 65536 (order: 6, 262144 bytes, linear) [ 0.709260] TCP established hash table entries: 4096 (order: 3, 32768 bytes, linear) [ 0.709456] TCP bind hash table entries: 4096 (order: 5, 131072 bytes, linear) [ 0.709627] TCP: Hash tables configured (established 4096 bind 4096) [ 0.709771] UDP hash table entries: 256 (order: 1, 8192 bytes, linear) [ 0.709893] UDP-Lite hash table entries: 256 (order: 1, 8192 bytes, linear) [ 0.710066] NET: Registered PF_UNIX/PF_LOCAL protocol family [ 0.710411] RPC: Registered named UNIX socket transport module. [ 0.710533] RPC: Registered udp transport module. [ 0.710676] RPC: Registered tcp transport module. [ 0.710788] RPC: Registered tcp-with-tls transport module. [ 0.710903] RPC: Registered tcp NFSv4.1 backchannel transport module. [ 0.711517] pci 0000:00:1c.4: bridge window [mem 0x00100000-0x000fffff 64bit pref] to [bus 0b] add_size 100000 add_align 100000 [ 0.711687] pci 0000:00:1c.4: bridge window [mem 0x90000000-0x900fffff 64bit pref]: assigned [ 0.711836] pci 0000:00:01.0: PCI bridge to [bus 01] [ 0.712034] pci 0000:00:01.1: PCI bridge to [bus 02] [ 0.712215] pci 0000:00:02.0: PCI bridge to [bus 03] [ 0.712349] pci 0000:00:02.0: bridge window [mem 0xfb500000-0xfb5fffff] [ 0.713630] pci 0000:04:00.0: VF BAR 0 [mem size 0x00100000 64bit]: can't assign; no space [ 0.713777] pci 0000:04:00.0: VF BAR 0 [mem size 0x00100000 64bit]: failed to assign [ 0.713922] pci 0000:04:00.0: VF BAR 3 [mem size 0x00100000 64bit]: can't assign; no space [ 0.714084] pci 0000:04:00.0: VF BAR 3 [mem size 0x00100000 64bit]: failed to assign [ 0.714230] pci 0000:04:00.1: VF BAR 0 [mem size 0x00100000 64bit]: can't assign; no space [ 0.714375] pci 0000:04:00.1: VF BAR 0 [mem size 0x00100000 64bit]: failed to assign [ 0.714519] pci 0000:04:00.1: VF BAR 3 [mem size 0x00100000 64bit]: can't assign; no space [ 0.714664] pci 0000:04:00.1: VF BAR 3 [mem size 0x00100000 64bit]: failed to assign [ 0.714814] pci 0000:04:00.0: VF BAR 0 [mem size 0x00100000 64bit]: can't assign; no space [ 0.714959] pci 0000:04:00.0: VF BAR 0 [mem size 0x00100000 64bit]: failed to assign [ 0.715122] pci 0000:04:00.0: VF BAR 3 [mem size 0x00100000 64bit]: can't assign; no space [ 0.715268] pci 0000:04:00.0: VF BAR 3 [mem size 0x00100000 64bit]: failed to assign [ 0.715412] pci 0000:04:00.1: VF BAR 0 [mem size 0x00100000 64bit]: can't assign; no space [ 0.715563] pci 0000:04:00.1: VF BAR 0 [mem size 0x00100000 64bit]: failed to assign [ 0.715707] pci 0000:04:00.1: VF BAR 3 [mem size 0x00100000 64bit]: can't assign; no space [ 0.715852] pci 0000:04:00.1: VF BAR 3 [mem size 0x00100000 64bit]: failed to assign [ 0.715997] pci 0000:00:02.2: PCI bridge to [bus 04] [ 0.716159] pci 0000:00:02.2: bridge window [mem 0xfb400000-0xfb4fffff] [ 0.716292] pci 0000:00:02.2: bridge window [mem 0xfba00000-0xfbefffff 64bit pref] [ 0.716463] pci 0000:00:03.0: PCI bridge to [bus 05] [ 0.716636] pci 0000:00:03.2: PCI bridge to [bus 06] [ 0.716809] pci 0000:00:1c.0: PCI bridge to [bus 07] [ 0.716929] pci 0000:00:1c.0: bridge window [io 0xe000-0xefff] [ 0.717086] pci 0000:00:1c.0: bridge window [mem 0xfb300000-0xfb3fffff] [ 0.717247] pci 0000:00:1c.1: PCI bridge to [bus 08] [ 0.717367] pci 0000:00:1c.1: bridge window [io 0xd000-0xdfff] [ 0.717511] pci 0000:00:1c.1: bridge window [mem 0xfb200000-0xfb2fffff] [ 0.717673] pci 0000:09:00.0: PCI bridge to [bus 0a] [ 0.717792] pci 0000:09:00.0: bridge window [io 0xc000-0xcfff] [ 0.717933] pci 0000:09:00.0: bridge window [mem 0xfa000000-0xfb0fffff] [ 0.718117] pci 0000:00:1c.3: PCI bridge to [bus 09-0a] [ 0.718237] pci 0000:00:1c.3: bridge window [io 0xc000-0xcfff] [ 0.718376] pci 0000:00:1c.3: bridge window [mem 0xfa000000-0xfb0fffff] [ 0.718559] pci 0000:0b:00.0: VF BAR 0 [mem 0x90000000-0x9001ffff 64bit pref]: assigned [ 0.718716] pci 0000:0b:00.0: VF BAR 3 [mem 0x90020000-0x9003ffff 64bit pref]: assigned [ 0.718871] pci 0000:0b:00.1: VF BAR 0 [mem 0x90040000-0x9005ffff 64bit pref]: assigned [ 0.719058] pci 0000:0b:00.1: VF BAR 3 [mem 0x90060000-0x9007ffff 64bit pref]: assigned [ 0.719211] pci 0000:0b:00.2: VF BAR 0 [mem 0x90080000-0x9009ffff 64bit pref]: assigned [ 0.719363] pci 0000:0b:00.2: VF BAR 3 [mem 0x900a0000-0x900bffff 64bit pref]: assigned [ 0.719515] pci 0000:0b:00.3: VF BAR 0 [mem 0x900c0000-0x900dffff 64bit pref]: assigned [ 0.719668] pci 0000:0b:00.3: VF BAR 3 [mem 0x900e0000-0x900fffff 64bit pref]: assigned [ 0.719821] pci 0000:00:1c.4: PCI bridge to [bus 0b] [ 0.719940] pci 0000:00:1c.4: bridge window [io 0xb000-0xbfff] [ 0.720098] pci 0000:00:1c.4: bridge window [mem 0xfb100000-0xfb1fffff] [ 0.720236] pci 0000:00:1c.4: bridge window [mem 0x90000000-0x900fffff 64bit pref] [ 0.720417] pci_bus 0000:00: Some PCI device resources are unassigned, try booting with pci=realloc [ 0.720566] pci_bus 0000:00: resource 4 [io 0x0000-0x0cf7 window] [ 0.720685] pci_bus 0000:00: resource 5 [io 0x1000-0xffff window] [ 0.720803] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff window] [ 0.720922] pci_bus 0000:00: resource 7 [mem 0x90000000-0xfbffbfff window] [ 0.721060] pci_bus 0000:03: resource 1 [mem 0xfb500000-0xfb5fffff] [ 0.721180] pci_bus 0000:04: resource 1 [mem 0xfb400000-0xfb4fffff] [ 0.721298] pci_bus 0000:04: resource 2 [mem 0xfba00000-0xfbefffff 64bit pref] [ 0.721442] pci_bus 0000:07: resource 0 [io 0xe000-0xefff] [ 0.721557] pci_bus 0000:07: resource 1 [mem 0xfb300000-0xfb3fffff] [ 0.721683] pci_bus 0000:08: resource 0 [io 0xd000-0xdfff] [ 0.721799] pci_bus 0000:08: resource 1 [mem 0xfb200000-0xfb2fffff] [ 0.721917] pci_bus 0000:09: resource 0 [io 0xc000-0xcfff] [ 0.722052] pci_bus 0000:09: resource 1 [mem 0xfa000000-0xfb0fffff] [ 0.722171] pci_bus 0000:0a: resource 0 [io 0xc000-0xcfff] [ 0.722287] pci_bus 0000:0a: resource 1 [mem 0xfa000000-0xfb0fffff] [ 0.722405] pci_bus 0000:0b: resource 0 [io 0xb000-0xbfff] [ 0.722520] pci_bus 0000:0b: resource 1 [mem 0xfb100000-0xfb1fffff] [ 0.722639] pci_bus 0000:0b: resource 2 [mem 0x90000000-0x900fffff 64bit pref] [ 0.723196] pci 0000:00:05.0: disabled boot interrupts on device [8086:6f28] [ 0.723405] xen: registering gsi 19 triggering 0 polarity 1 [ 0.723439] xen: --> pirq=19 -> irq=19 (gsi=19) [ 0.732269] xen: registering gsi 18 triggering 0 polarity 1 [ 0.732292] xen: --> pirq=18 -> irq=18 (gsi=18) [ 0.749316] pci 0000:00:1a.0: quirk_usb_early_handoff+0x0/0x7c0 took 16696 usecs [ 0.749566] xen: registering gsi 18 triggering 0 polarity 1 [ 0.749572] Already setup the GSI :18 [ 0.766287] pci 0000:00:1d.0: quirk_usb_early_handoff+0x0/0x7c0 took 16379 usecs [ 0.766509] pci 0000:04:00.0: CLS mismatch (64 != 32), using 64 bytes [ 0.766683] PCI-DMA: Using software bounce buffering for IO (SWIOTLB) [ 0.766776] Unpacking initramfs... [ 0.766803] software IO TLB: mapped [mem 0x000000001b180000-0x000000001f180000] (64MB) [ 0.767164] kvm_intel: VMX not supported by CPU 0 [ 0.767281] kvm_amd: CPU 0 isn't AMD or Hygon [ 0.767396] clocksource: tsc: mask: 0xffffffffffffffff max_cycles: 0x1fb62d1c185, max_idle_ns: 440795211487 ns [ 0.767647] clocksource: Switched to clocksource tsc [ 0.777008] Initialise system trusted keyrings [ 0.777275] workingset: timestamp_bits=62 max_order=17 bucket_order=0 [ 0.777628] NFS: Registering the id_resolver key type [ 0.777751] Key type id_resolver registered [ 0.777862] Key type id_legacy registered [ 0.778086] 9p: Installing v9fs 9p2000 file system support [ 0.795836] Key type asymmetric registered [ 0.795964] Asymmetric key parser 'x509' registered [ 0.796107] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 251) [ 0.796261] io scheduler mq-deadline registered [ 0.796375] io scheduler kyber registered [ 0.797320] xen: registering gsi 16 triggering 0 polarity 1 [ 0.797357] xen: --> pirq=16 -> irq=16 (gsi=16) [ 0.797812] xen: registering gsi 16 triggering 0 polarity 1 [ 0.797819] Already setup the GSI :16 [ 0.798290] xen: registering gsi 16 triggering 0 polarity 1 [ 0.798296] Already setup the GSI :16 [ 0.798660] xen: registering gsi 16 triggering 0 polarity 1 [ 0.798665] Already setup the GSI :16 [ 0.798984] xen: registering gsi 16 triggering 0 polarity 1 [ 0.798988] Already setup the GSI :16 [ 0.799493] xen: registering gsi 16 triggering 0 polarity 1 [ 0.799499] Already setup the GSI :16 [ 0.799980] xen: registering gsi 16 triggering 0 polarity 1 [ 0.799986] Already setup the GSI :16 [ 0.800454] xen: registering gsi 17 triggering 0 polarity 1 [ 0.800484] xen: --> pirq=17 -> irq=17 (gsi=17) [ 0.800828] xen: registering gsi 19 triggering 0 polarity 1 [ 0.800833] Already setup the GSI :19 [ 0.801277] xen: registering gsi 16 triggering 0 polarity 1 [ 0.801282] Already setup the GSI :16 [ 0.801981] input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input0 [ 0.802160] ACPI: button: Power Button [PWRB] [ 0.802305] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input1 [ 0.802601] ACPI: button: Power Button [PWRF] [ 0.802874] Monitor-Mwait will be used to enter C-1 state [ 0.802923] Monitor-Mwait will be used to enter C-2 state [ 0.802946] ACPI: \_SB_.SCK0.CP00: Found 2 idle states [ 0.803300] ACPI: \_SB_.SCK0.CP01: Found 2 idle states [ 0.803843] ACPI: \_SB_.SCK0.CP02: Found 2 idle states [ 0.804236] ACPI: \_SB_.SCK0.CP03: Found 2 idle states [ 0.804713] ACPI: \_SB_.SCK0.CP04: Found 2 idle states [ 0.805205] ACPI: \_SB_.SCK0.CP05: Found 2 idle states [ 0.805638] ACPI: \_SB_.SCK0.CP06: Found 2 idle states [ 0.806069] ACPI: \_SB_.SCK0.CP07: Found 2 idle states [ 0.806998] xen:xen_evtchn: Event-channel device installed [ 0.807212] xen_pciback: backend is vpci [ 0.808006] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled [ 0.808442] 00:04: ttyS1 at I/O 0x2f8 (irq = 3, base_baud = 115200) is a 16550A [ 0.809246] hpet_acpi_add: no address or irqs in _CRS [ 0.809508] Non-volatile memory driver v1.3 [ 0.812063] loop: module loaded [ 0.818798] mei_me 0000:00:16.0: Device doesn't have valid ME Interface [ 0.818815] ahci 0000:00:1f.2: version 3.0 [ 0.819020] xen: registering gsi 16 triggering 0 polarity 1 [ 0.819030] Already setup the GSI :16 [ 0.819377] ahci 0000:00:1f.2: AHCI vers 0001.0300, 32 command slots, 6 Gbps, SATA mode [ 0.819553] ahci 0000:00:1f.2: 6/6 ports implemented (port mask 0x3f) [ 0.819681] ahci 0000:00:1f.2: flags: 64bit ncq led clo pio ems apst [ 0.835119] scsi host0: ahci [ 0.835526] scsi host1: ahci [ 0.835880] scsi host2: ahci [ 0.836227] scsi host3: ahci [ 0.836574] scsi host4: ahci [ 0.836921] scsi host5: ahci [ 0.837072] ata1: SATA max UDMA/133 abar m2048@0xfb612000 port 0xfb612100 irq 83 lpm-pol 0 [ 0.837225] ata2: SATA max UDMA/133 abar m2048@0xfb612000 port 0xfb612180 irq 83 lpm-pol 0 [ 0.837371] ata3: SATA max UDMA/133 abar m2048@0xfb612000 port 0xfb612200 irq 83 lpm-pol 0 [ 0.837532] ata4: SATA max UDMA/133 abar m2048@0xfb612000 port 0xfb612280 irq 83 lpm-pol 0 [ 0.837689] ata5: SATA max UDMA/133 abar m2048@0xfb612000 port 0xfb612300 irq 83 lpm-pol 0 [ 0.837835] ata6: SATA max UDMA/133 abar m2048@0xfb612000 port 0xfb612380 irq 83 lpm-pol 0 [ 0.838409] tun: Universal TUN/TAP device driver, 1.6 [ 0.838742] e100: Intel(R) PRO/100 Network Driver [ 0.838859] e100: Copyright(c) 1999-2006 Intel Corporation [ 0.838997] sky2: driver version 1.30 [ 0.839199] xen_netfront: Initialising Xen virtual ethernet driver [ 0.840766] xen: registering gsi 19 triggering 0 polarity 1 [ 0.840776] Already setup the GSI :19 [ 0.840890] xen: registering gsi 18 triggering 0 polarity 1 [ 0.840901] Already setup the GSI :18 [ 0.840977] xen: registering gsi 18 triggering 0 polarity 1 [ 0.841010] xhci_hcd 0000:00:14.0: xHCI Host Controller [ 0.841084] xhci_hcd 0000:00:14.0: new USB bus registered, assigned bus number 1 [ 0.841183] Already setup the GSI :18 [ 0.842268] xhci_hcd 0000:00:14.0: hcc params 0x200077c1 hci version 0x100 quirks 0x0000000000009810 [ 0.842811] xhci_hcd 0000:00:14.0: xHCI Host Controller [ 0.842857] ehci-pci 0000:00:1a.0: EHCI Host Controller [ 0.843039] xhci_hcd 0000:00:14.0: new USB bus registered, assigned bus number 2 [ 0.843145] ehci-pci 0000:00:1a.0: new USB bus registered, assigned bus number 3 [ 0.843199] xhci_hcd 0000:00:14.0: Host supports USB 3.0 SuperSpeed [ 0.843242] ehci-pci 0000:00:1a.0: debug port 2 [ 0.843502] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 6.10 [ 0.843746] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 0.843891] usb usb1: Product: xHCI Host Controller [ 0.844007] usb usb1: Manufacturer: Linux 6.10.0-rc4+ xhci-hcd [ 0.844140] usb usb1: SerialNumber: 0000:00:14.0 [ 0.844525] hub 1-0:1.0: USB hub found [ 0.844663] hub 1-0:1.0: 8 ports detected [ 0.845838] usb usb2: New USB device found, idVendor=1d6b, idProduct=0003, bcdDevice= 6.10 [ 0.845992] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 0.846138] usb usb2: Product: xHCI Host Controller [ 0.846254] usb usb2: Manufacturer: Linux 6.10.0-rc4+ xhci-hcd [ 0.846373] usb usb2: SerialNumber: 0000:00:14.0 [ 0.846676] hub 2-0:1.0: USB hub found [ 0.846812] hub 2-0:1.0: 6 ports detected [ 0.847588] ehci-pci 0000:00:1a.0: irq 18, io mem 0xfb614000 [ 0.848063] usbcore: registered new interface driver usblp [ 0.848194] usbcore: registered new interface driver usb-storage [ 0.848372] i8042: PNP: No PS/2 controller found. [ 0.848705] rtc_cmos 00:00: RTC can wake from S4 [ 0.849380] rtc_cmos 00:00: registered as rtc0 [ 0.849559] rtc_cmos 00:00: alarms up to one month, y3k, 114 bytes nvram [ 0.849747] device-mapper: uevent: version 1.0.3 [ 0.849947] device-mapper: ioctl: 4.48.0-ioctl (2023-03-01) initialised: dm-devel@lists.linux.dev [ 0.850041] xen: registering gsi 18 triggering 0 polarity 1 [ 0.850127] intel_pstate: CPU model not supported [ 0.850128] Already setup the GSI :18 [ 0.850180] i801_smbus 0000:00:1f.3: SPD Write Disable is set [ 0.850286] hid: raw HID events driver (C) Jiri Kosina [ 0.850408] i801_smbus 0000:00:1f.3: SMBus using PCI interrupt [ 0.850765] usbcore: registered new interface driver usbhid [ 0.850932] usbhid: USB HID core driver [ 0.851650] Initializing XFRM netlink socket [ 0.851834] NET: Registered PF_INET6 protocol family [ 0.852451] Segment Routing with IPv6 [ 0.852580] In-situ OAM (IOAM) with IPv6 [ 0.852724] sit: IPv6, IPv4 and MPLS over IPv4 tunneling driver [ 0.852973] NET: Registered PF_PACKET protocol family [ 0.853117] 9pnet: Installing 9P2000 support [ 0.853244] Key type dns_resolver registered [ 0.854083] IPI shorthand broadcast: enabled [ 0.854509] ehci-pci 0000:00:1a.0: USB 2.0 started, EHCI 1.00 [ 0.854878] usb usb3: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 6.10 [ 0.855031] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 0.855181] usb usb3: Product: EHCI Host Controller [ 0.855296] usb usb3: Manufacturer: Linux 6.10.0-rc4+ ehci_hcd [ 0.855413] usb usb3: SerialNumber: 0000:00:1a.0 [ 0.855883] hub 3-0:1.0: USB hub found [ 0.856028] hub 3-0:1.0: 2 ports detected [ 0.856511] ehci-pci 0000:00:1d.0: EHCI Host Controller [ 0.856789] ehci-pci 0000:00:1d.0: new USB bus registered, assigned bus number 4 [ 0.856969] ehci-pci 0000:00:1d.0: debug port 2 [ 0.857408] sched_clock: Marking stable (819005903, 37424363)->(1738919347, -882489081) [ 0.857962] Timer migration: 1 hierarchy levels; 8 children per group; 1 crossnode level [ 0.861088] ehci-pci 0000:00:1d.0: irq 18, io mem 0xfb613000 [ 0.861398] registered taskstats version 1 [ 0.861541] Loading compiled-in X.509 certificates [ 0.863233] PM: Magic number: 12:348:197 [ 0.863421] acpi device:52: hash matches [ 0.863591] acpi PNP0100:00: hash matches [ 0.863740] printk: legacy console [netcon0] enabled [ 0.863856] netconsole: network logging started [ 0.864417] cfg80211: Loading compiled-in X.509 certificates for regulatory database [ 0.867506] ehci-pci 0000:00:1d.0: USB 2.0 started, EHCI 1.00 [ 0.867849] usb usb4: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 6.10 [ 0.868005] usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 0.868150] usb usb4: Product: EHCI Host Controller [ 0.868265] usb usb4: Manufacturer: Linux 6.10.0-rc4+ ehci_hcd [ 0.868383] usb usb4: SerialNumber: 0000:00:1d.0 [ 0.868706] hub 4-0:1.0: USB hub found [ 0.868856] hub 4-0:1.0: 2 ports detected [ 0.884696] Freeing initrd memory: 20120K [ 0.896806] Loaded X.509 cert 'sforshee: 00b28ddf47aef9cea7' [ 0.897147] Loaded X.509 cert 'wens: 61c038651aabdcf94bd0ac7ff06c7248db18c600' [ 0.897828] cfg80211: loaded regulatory.db is malformed or signature is missing/invalid [ 0.898013] ALSA device list: [ 0.898140] No soundcards found. [ 1.083541] usb 1-3: new high-speed USB device number 2 using xhci_hcd [ 1.091581] usb 3-1: new high-speed USB device number 2 using ehci-pci [ 1.107553] usb 4-1: new high-speed USB device number 2 using ehci-pci [ 1.144570] ata1: SATA link down (SStatus 0 SControl 300) [ 1.144731] ata5: SATA link down (SStatus 0 SControl 300) [ 1.144889] ata3: SATA link up 6.0 Gbps (SStatus 133 SControl 300) [ 1.145041] ata4: SATA link down (SStatus 0 SControl 300) [ 1.145286] ata2: SATA link down (SStatus 0 SControl 300) [ 1.145417] ata6: SATA link down (SStatus 0 SControl 300) [ 1.146110] ata3.00: ATA-10: HGST HUS722T1TALA604, RAGNWA05, max UDMA/133 [ 1.211251] usb 1-3: New USB device found, idVendor=05e3, idProduct=0610, bcdDevice=32.98 [ 1.211578] usb 1-3: New USB device strings: Mfr=0, Product=1, SerialNumber=0 [ 1.211731] usb 1-3: Product: USB2.0 Hub [ 1.212654] hub 1-3:1.0: USB hub found [ 1.213181] hub 1-3:1.0: 4 ports detected [ 1.219904] usb 3-1: New USB device found, idVendor=8087, idProduct=8008, bcdDevice= 0.05 [ 1.220060] usb 3-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0 [ 1.220477] hub 3-1:1.0: USB hub found [ 1.220656] hub 3-1:1.0: 4 ports detected [ 1.236031] usb 4-1: New USB device found, idVendor=8087, idProduct=8000, bcdDevice= 0.05 [ 1.236188] usb 4-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0 [ 1.236590] hub 4-1:1.0: USB hub found [ 1.236782] hub 4-1:1.0: 4 ports detected [ 1.239373] ata3.00: 1953525168 sectors, multi 16: LBA48 NCQ (depth 32), AA [ 1.239625] ata3.00: Features: NCQ-sndrcv NCQ-prio [ 1.267320] ata3.00: configured for UDMA/133 [ 1.267694] scsi 2:0:0:0: Direct-Access ATA HGST HUS722T1TAL WA05 PQ: 0 ANSI: 5 [ 1.268645] sd 2:0:0:0: Attached scsi generic sg0 type 0 [ 1.268716] sd 2:0:0:0: [sda] 1953525168 512-byte logical blocks: (1.00 TB/932 GiB) [ 1.268973] sd 2:0:0:0: [sda] Write Protect is off [ 1.269097] sd 2:0:0:0: [sda] Mode Sense: 00 3a 00 00 [ 1.269166] sd 2:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 1.269444] sd 2:0:0:0: [sda] Preferred minimum I/O size 512 bytes [ 1.285839] sda: sda1 sda2 < sda5 > [ 1.286253] sd 2:0:0:0: [sda] Attached SCSI disk [ 1.288170] Freeing unused kernel image (initmem) memory: 2680K [ 1.288311] Write protecting the kernel read-only data: 24576k [ 1.308964] Freeing unused kernel image (rodata/data gap) memory: 2028K [ 1.330493] usb 1-4: new high-speed USB device number 3 using xhci_hcd [ 1.456813] usb 1-4: New USB device found, idVendor=0557, idProduct=7000, bcdDevice= 0.00 [ 1.456973] usb 1-4: New USB device strings: Mfr=0, Product=0, SerialNumber=0 [ 1.457707] hub 1-4:1.0: USB hub found [ 1.457915] hub 1-4:1.0: 4 ports detected [ 1.520458] usb 1-3.2: new high-speed USB device number 4 using xhci_hcd [ 1.597818] usb 1-3.2: New USB device found, idVendor=05e3, idProduct=0610, bcdDevice=32.98 [ 1.598021] usb 1-3.2: New USB device strings: Mfr=0, Product=1, SerialNumber=0 [ 1.598216] usb 1-3.2: Product: USB2.0 Hub [ 1.599040] hub 1-3.2:1.0: USB hub found [ 1.599540] hub 1-3.2:1.0: 4 ports detected [ 1.749476] usb 1-4.1: new low-speed USB device number 5 using xhci_hcd [ 1.806167] x86/mm: Checked W+X mappings: passed, no W+X pages found. [ 1.806297] Run /init as init process [ 1.806469] with arguments: [ 1.806471] /init [ 1.806472] placeholder [ 1.806473] with environment: [ 1.806474] HOME=/ [ 1.806475] TERM=linux [ 1.853878] usb 1-4.1: New USB device found, idVendor=0557, idProduct=2419, bcdDevice= 1.00 [ 1.854035] usb 1-4.1: New USB device strings: Mfr=0, Product=0, SerialNumber=0 [ 1.859926] input: HID 0557:2419 as /devices/pci0000:00/0000:00:14.0/usb1/1-4/1-4.1/1-4.1:1.0/0003:0557:2419.0001/input/input2 [ 1.912019] hid-generic 0003:0557:2419.0001: input,hidraw0: USB HID v1.00 Keyboard [HID 0557:2419] on usb-0000:00:14.0-4.1/input0 [ 1.915001] input: HID 0557:2419 as /devices/pci0000:00/0000:00:14.0/usb1/1-4/1-4.1/1-4.1:1.1/0003:0557:2419.0002/input/input3 [ 1.915535] hid-generic 0003:0557:2419.0002: input,hidraw1: USB HID v1.00 Mouse [HID 0557:2419] on usb-0000:00:14.0-4.1/input1 [ 2.252393] ixgbe: Intel(R) 10 Gigabit PCI Express Network Driver [ 2.252584] ixgbe: Copyright (c) 1999-2016 Intel Corporation. [ 2.254205] ACPI Warning: \_SB.PCI0.BR2C._PRT: Return Package has no elements (empty) (20240322/nsprepkg-94) [ 2.254493] xen: registering gsi 16 triggering 0 polarity 1 [ 2.254503] Already setup the GSI :16 [ 2.256464] igb: Intel(R) Gigabit Ethernet Network Driver [ 2.256590] igb: Copyright (c) 2007-2014 Intel Corporation. [ 2.256780] xen: registering gsi 16 triggering 0 polarity 1 [ 2.256788] Already setup the GSI :16 [ 2.284990] pps pps0: new PPS source ptp0 [ 2.285192] igb 0000:07:00.0: added PHC on eth0 [ 2.285326] igb 0000:07:00.0: Intel(R) Gigabit Ethernet Network Connection [ 2.285463] igb 0000:07:00.0: eth0: (PCIe:2.5Gb/s:Width x1) 0c:c4:7a:93:a4:c8 [ 2.285628] igb 0000:07:00.0: eth0: PBA No: 010C00-000 [ 2.285744] igb 0000:07:00.0: Using MSI-X interrupts. 4 rx queue(s), 4 tx queue(s) [ 2.285975] xen: registering gsi 17 triggering 0 polarity 1 [ 2.285983] Already setup the GSI :17 [ 2.314814] pps pps1: new PPS source ptp1 [ 2.315024] igb 0000:08:00.0: added PHC on eth1 [ 2.315159] igb 0000:08:00.0: Intel(R) Gigabit Ethernet Network Connection [ 2.315280] igb 0000:08:00.0: eth1: (PCIe:2.5Gb/s:Width x1) 0c:c4:7a:93:a4:c9 [ 2.315493] igb 0000:08:00.0: eth1: PBA No: 010000-000 [ 2.315609] igb 0000:08:00.0: Using MSI-X interrupts. 4 rx queue(s), 4 tx queue(s) [ 2.315836] xen: registering gsi 16 triggering 0 polarity 1 [ 2.315843] Already setup the GSI :16 [ 2.373286] igb 0000:0b:00.0: added PHC on eth2 [ 2.373443] igb 0000:0b:00.0: Intel(R) Gigabit Ethernet Network Connection [ 2.373605] igb 0000:0b:00.0: eth2: (PCIe:5.0Gb/s:Width x4) 0c:c4:7a:93:a4:ca [ 2.373808] igb 0000:0b:00.0: eth2: PBA No: 010000-000 [ 2.373923] igb 0000:0b:00.0: Using MSI-X interrupts. 8 rx queue(s), 8 tx queue(s) [ 2.374147] xen: registering gsi 17 triggering 0 polarity 1 [ 2.374155] Already setup the GSI :17 [ 2.432125] igb 0000:0b:00.1: added PHC on eth3 [ 2.432264] igb 0000:0b:00.1: Intel(R) Gigabit Ethernet Network Connection [ 2.432385] igb 0000:0b:00.1: eth3: (PCIe:5.0Gb/s:Width x4) 0c:c4:7a:93:a4:cb [ 2.432609] igb 0000:0b:00.1: eth3: PBA No: 010000-000 [ 2.432725] igb 0000:0b:00.1: Using MSI-X interrupts. 8 rx queue(s), 8 tx queue(s) [ 2.432944] xen: registering gsi 18 triggering 0 polarity 1 [ 2.432951] Already setup the GSI :18 [ 2.490649] igb 0000:0b:00.2: added PHC on eth4 [ 2.490793] igb 0000:0b:00.2: Intel(R) Gigabit Ethernet Network Connection [ 2.490914] igb 0000:0b:00.2: eth4: (PCIe:5.0Gb/s:Width x4) 0c:c4:7a:93:a4:cc [ 2.491117] igb 0000:0b:00.2: eth4: PBA No: 010000-000 [ 2.491233] igb 0000:0b:00.2: Using MSI-X interrupts. 8 rx queue(s), 8 tx queue(s) [ 2.491528] xen: registering gsi 19 triggering 0 polarity 1 [ 2.491538] Already setup the GSI :19 [ 2.548451] igb 0000:0b:00.3: added PHC on eth5 [ 2.548604] igb 0000:0b:00.3: Intel(R) Gigabit Ethernet Network Connection [ 2.548725] igb 0000:0b:00.3: eth5: (PCIe:5.0Gb/s:Width x4) 0c:c4:7a:93:a4:cd [ 2.548929] igb 0000:0b:00.3: eth5: PBA No: 010000-000 [ 2.549044] igb 0000:0b:00.3: Using MSI-X interrupts. 8 rx queue(s), 8 tx queue(s) [ 2.551641] igb 0000:0b:00.0 enx0cc47a93a4ca: renamed from eth2 [ 2.552072] igb 0000:07:00.0 enx0cc47a93a4c8: renamed from eth0 [ 2.552815] igb 0000:08:00.0 enx0cc47a93a4c9: renamed from eth1 [ 2.553209] igb 0000:0b:00.1 enx0cc47a93a4cb: renamed from eth3 [ 2.553933] igb 0000:0b:00.3 enx0cc47a93a4cd: renamed from eth5 [ 2.554406] igb 0000:0b:00.2 enx0cc47a93a4cc: renamed from eth4 [ 2.987594] ixgbe 0000:04:00.0: Multiqueue Enabled: Rx Queue count = 8, Tx Queue count = 8 XDP Queue count = 0 [ 3.120213] ixgbe 0000:04:00.0: MAC: 5, PHY: 0, PBA No: 020B00-000 [ 3.120438] ixgbe 0000:04:00.0: 0c:c4:7a:93:a8:9e [ 3.415303] ixgbe 0000:04:00.0: Intel(R) 10 Gigabit Network Connection [ 3.415882] ACPI Warning: \_SB.PCI0.BR2C._PRT: Return Package has no elements (empty) (20240322/nsprepkg-94) [ 3.416097] xen: registering gsi 17 triggering 0 polarity 1 [ 3.416108] Already setup the GSI :17 [ 4.156304] ixgbe 0000:04:00.1: Multiqueue Enabled: Rx Queue count = 8, Tx Queue count = 8 XDP Queue count = 0 [ 4.286050] ixgbe 0000:04:00.1: MAC: 5, PHY: 0, PBA No: 020B00-000 [ 4.286338] ixgbe 0000:04:00.1: 0c:c4:7a:93:a8:9f [ 4.575685] ixgbe 0000:04:00.1: Intel(R) 10 Gigabit Network Connection [ 4.578242] ixgbe 0000:04:00.0 enx0cc47a93a89e: renamed from eth0 [ 4.578682] ixgbe 0000:04:00.1 enx0cc47a93a89f: renamed from eth1 [ 4.991265] EXT4-fs (dm-0): mounting ext3 file system using the ext4 subsystem [ 4.998726] EXT4-fs (dm-0): mounted filesystem 173b5554-f2ad-44db-a96f-f0707c86487f ro with ordered data mode. Quota mode: none. [ 9.242623] EXT4-fs (dm-0): re-mounted 173b5554-f2ad-44db-a96f-f0707c86487f r/w. Quota mode: none. [ 10.525386] EXT4-fs (sda1): mounting ext3 file system using the ext4 subsystem [ 10.558409] EXT4-fs (sda1): mounted filesystem be6e2fe3-7fd0-43dc-b4c2-57b07674db34 r/w with ordered data mode. Quota mode: none. [ 10.650901] Adding 1949692k swap on /dev/mapper/debina1--vg-swap_1. Priority:-2 extents:1 across:1949692k [ 12.207823] xenbr0: port 1(enx0cc47a93a4c8) entered blocking state [ 12.208001] xenbr0: port 1(enx0cc47a93a4c8) entered disabled state [ 12.208132] igb 0000:07:00.0 enx0cc47a93a4c8: entered allmulticast mode [ 12.208301] igb 0000:07:00.0 enx0cc47a93a4c8: entered promiscuous mode [ 15.352037] igb 0000:07:00.0 enx0cc47a93a4c8: igb: enx0cc47a93a4c8 NIC Link is Up 1000 Mbps Full Duplex, Flow Control: RX [ 15.561818] xenbr0: port 1(enx0cc47a93a4c8) entered blocking state [ 15.561972] xenbr0: port 1(enx0cc47a93a4c8) entered forwarding state