[ 0.000000] Linux version 6.1.94+ (osstest@himrod0) (gcc (Debian 12.2.0-14) 12.2.0, GNU ld (GNU Binutils for Debian) 2.40) #1 SMP PREEMPT_DYNAMIC Thu Jun 20 21:42:04 UTC 2024 [ 0.000000] Command line: placeholder root=/dev/mapper/debina0--vg-root ro console=hvc0 [ 0.000000] Released 0 page(s) [ 0.000000] BIOS-provided physical RAM map: [ 0.000000] Xen: [mem 0x0000000000000000-0x0000000000099fff] usable [ 0.000000] Xen: [mem 0x000000000009ac00-0x00000000000fffff] reserved [ 0.000000] Xen: [mem 0x0000000000100000-0x0000000020065fff] usable [ 0.000000] Xen: [mem 0x00000000796ef000-0x00000000798bdfff] reserved [ 0.000000] Xen: [mem 0x00000000799b7000-0x0000000079e5afff] ACPI NVS [ 0.000000] Xen: [mem 0x0000000079e5b000-0x000000007bdb0fff] reserved [ 0.000000] Xen: [mem 0x000000007bdb2000-0x000000007be37fff] reserved [ 0.000000] Xen: [mem 0x0000000080000000-0x000000008fffffff] reserved [ 0.000000] Xen: [mem 0x00000000fbffc000-0x00000000fbffcfff] reserved [ 0.000000] Xen: [mem 0x00000000fec00000-0x00000000fec00fff] reserved [ 0.000000] Xen: [mem 0x00000000fed1c000-0x00000000fed1ffff] reserved [ 0.000000] Xen: [mem 0x00000000fee00000-0x00000000feefffff] reserved [ 0.000000] Xen: [mem 0x00000000ff000000-0x00000000ffffffff] reserved [ 0.000000] NX (Execute Disable) protection: active [ 0.000000] SMBIOS 2.8 present. [ 0.000000] DMI: Supermicro SYS-5018D-FN8T/X10SDV-TP8F, BIOS 1.0b 11/21/2016 [ 0.000000] Hypervisor detected: Xen PV [ 0.000461] tsc: Detected 2199.998 MHz processor [ 0.000903] e820: update [mem 0x00000000-0x00000fff] usable ==> reserved [ 0.000906] e820: remove [mem 0x000a0000-0x000fffff] usable [ 0.000913] last_pfn = 0x20066 max_arch_pfn = 0x400000000 [ 0.000915] Disabled [ 0.000916] x86/PAT: MTRRs disabled, skipping PAT initialization too. [ 0.000920] x86/PAT: Configuration [0-7]: WB WT UC- UC WC WP UC UC [ 0.000958] Kernel/User page tables isolation: disabled on XEN PV. [ 0.027757] RAMDISK: [mem 0x04000000-0x0536afff] [ 0.027766] ACPI: Early table checksum verification disabled [ 0.028366] ACPI: RSDP 0x00000000000F0580 000024 (v02 SUPERM) [ 0.028378] ACPI: XSDT 0x00000000799FF098 0000B4 (v01 SUPERM SMCI--MB 01072009 AMI 00010013) [ 0.028414] ACPI: FACP 0x0000000079A17AC0 00010C (v05 SUPERM SMCI--MB 01072009 AMI 00010013) [ 0.028462] ACPI: DSDT 0x00000000799FF1E8 0188D5 (v02 SUPERM SMCI--MB 01072009 INTL 20091013) [ 0.028478] ACPI: FACS 0x0000000079E59F80 000040 [ 0.028494] ACPI: APIC 0x0000000079A17BD0 0000BC (v03 SUPERM SMCI--MB 01072009 AMI 00010013) [ 0.028510] ACPI: FPDT 0x0000000079A17C90 000044 (v01 SUPERM SMCI--MB 01072009 AMI 00010013) [ 0.028526] ACPI: FIDT 0x0000000079A17CD8 00009C (v01 SUPERM SMCI--MB 01072009 AMI 00010013) [ 0.028542] ACPI: MCFG 0x0000000079A17D78 00003C (v01 SUPERM SMCI--MB 01072009 MSFT 00000097) [ 0.028558] ACPI: UEFI 0x0000000079A17DB8 000042 (v01 00000000 00000000) [ 0.028575] ACPI: DBG2 0x0000000079A17E00 000072 (v00 SUPERM SMCI--MB 00000000 INTL 20091013) [ 0.028591] ACPI: HPET 0x0000000079A17E78 000038 (v01 SUPERM SMCI--MB 00000001 INTL 20091013) [ 0.028607] ACPI: WDDT 0x0000000079A17EB0 000040 (v01 SUPERM SMCI--MB 00000000 INTL 20091013) [ 0.028623] ACPI: SSDT 0x0000000079A17EF0 00ED8B (v01 AMI PmMgt 00000001 INTL 20120913) [ 0.028639] ACPI: SSDT 0x0000000079A26C80 002285 (v02 SUPERM SpsNm 00000002 INTL 20120913) [ 0.028655] ACPI: SSDT 0x0000000079A28F08 000064 (v02 SUPERM SpsNvs 00000002 INTL 20120913) [ 0.028671] ACPI: PRAD 0x0000000079A28F70 000102 (v02 SUPERM SMCI--MB 00000002 INTL 20120913) [ 0.028687] ACPI: RMAD 0x0000000079A29078 0000CC (v01 SUPERM SMCI--MB 00000001 INTL 20091013) [ 0.028704] ACPI: HEST 0x0000000079A29148 0000A8 (v01 SUPERM SMCI--MB 00000001 INTL 00000001) [ 0.028720] ACPI: BERT 0x0000000079A291F0 000030 (v01 SUPERM SMCI--MB 00000001 INTL 00000001) [ 0.028736] ACPI: ERST 0x0000000079A29220 000230 (v01 SUPERM SMCI--MB 00000001 INTL 00000001) [ 0.028752] ACPI: EINJ 0x0000000079A29450 000130 (v01 SUPERM SMCI--MB 00000001 INTL 00000001) [ 0.028760] ACPI: Reserving FACP table memory at [mem 0x79a17ac0-0x79a17bcb] [ 0.028767] ACPI: Reserving DSDT table memory at [mem 0x799ff1e8-0x79a17abc] [ 0.028768] ACPI: Reserving FACS table memory at [mem 0x79e59f80-0x79e59fbf] [ 0.028769] ACPI: Reserving APIC table memory at [mem 0x79a17bd0-0x79a17c8b] [ 0.028770] ACPI: Reserving FPDT table memory at [mem 0x79a17c90-0x79a17cd3] [ 0.028771] ACPI: Reserving FIDT table memory at [mem 0x79a17cd8-0x79a17d73] [ 0.028772] ACPI: Reserving MCFG table memory at [mem 0x79a17d78-0x79a17db3] [ 0.028773] ACPI: Reserving UEFI table memory at [mem 0x79a17db8-0x79a17df9] [ 0.028774] ACPI: Reserving DBG2 table memory at [mem 0x79a17e00-0x79a17e71] [ 0.028775] ACPI: Reserving HPET table memory at [mem 0x79a17e78-0x79a17eaf] [ 0.028776] ACPI: Reserving WDDT table memory at [mem 0x79a17eb0-0x79a17eef] [ 0.028777] ACPI: Reserving SSDT table memory at [mem 0x79a17ef0-0x79a26c7a] [ 0.028778] ACPI: Reserving SSDT table memory at [mem 0x79a26c80-0x79a28f04] [ 0.028779] ACPI: Reserving SSDT table memory at [mem 0x79a28f08-0x79a28f6b] [ 0.028780] ACPI: Reserving PRAD table memory at [mem 0x79a28f70-0x79a29071] [ 0.028781] ACPI: Reserving RMAD table memory at [mem 0x79a29078-0x79a29143] [ 0.028782] ACPI: Reserving HEST table memory at [mem 0x79a29148-0x79a291ef] [ 0.028783] ACPI: Reserving BERT table memory at [mem 0x79a291f0-0x79a2921f] [ 0.028784] ACPI: Reserving ERST table memory at [mem 0x79a29220-0x79a2944f] [ 0.028785] ACPI: Reserving EINJ table memory at [mem 0x79a29450-0x79a2957f] [ 0.028830] Setting APIC routing to Xen PV. [ 0.032793] Zone ranges: [ 0.032794] DMA [mem 0x0000000000001000-0x0000000000ffffff] [ 0.032797] DMA32 [mem 0x0000000001000000-0x0000000020065fff] [ 0.032799] Normal empty [ 0.032800] Movable zone start for each node [ 0.032800] Early memory node ranges [ 0.032801] node 0: [mem 0x0000000000001000-0x0000000000099fff] [ 0.032803] node 0: [mem 0x0000000000100000-0x0000000020065fff] [ 0.032804] Initmem setup node 0 [mem 0x0000000000001000-0x0000000020065fff] [ 0.032809] On node 0, zone DMA: 1 pages in unavailable ranges [ 0.032847] On node 0, zone DMA: 102 pages in unavailable ranges [ 0.034386] On node 0, zone DMA32: 32666 pages in unavailable ranges [ 0.034391] p2m virtual area at (____ptrval____), size is 40000000 [ 0.221921] Remapped 102 page(s) [ 0.223274] ACPI: PM-Timer IO Port: 0x408 [ 0.223328] ACPI: LAPIC_NMI (acpi_id[0x00] high level lint[0x1]) [ 0.223331] ACPI: LAPIC_NMI (acpi_id[0x02] high level lint[0x1]) [ 0.223333] ACPI: LAPIC_NMI (acpi_id[0x04] high level lint[0x1]) [ 0.223335] ACPI: LAPIC_NMI (acpi_id[0x06] high level lint[0x1]) [ 0.223336] ACPI: LAPIC_NMI (acpi_id[0x01] high level lint[0x1]) [ 0.223337] ACPI: LAPIC_NMI (acpi_id[0x03] high level lint[0x1]) [ 0.223339] ACPI: LAPIC_NMI (acpi_id[0x05] high level lint[0x1]) [ 0.223341] ACPI: LAPIC_NMI (acpi_id[0x07] high level lint[0x1]) [ 0.223369] IOAPIC[0]: apic_id 8, version 32, address 0xfec00000, GSI 0-23 [ 0.223383] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl) [ 0.223386] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level) [ 0.223412] ACPI: Using ACPI (MADT) for SMP configuration information [ 0.223417] ACPI: HPET id: 0x8086a701 base: 0xfed00000 [ 0.223487] smpboot: Allowing 8 CPUs, 0 hotplug CPUs [ 0.223502] PM: hibernation: Registered nosave memory: [mem 0x00000000-0x00000fff] [ 0.223505] PM: hibernation: Registered nosave memory: [mem 0x0009a000-0x0009afff] [ 0.223506] PM: hibernation: Registered nosave memory: [mem 0x0009b000-0x000fffff] [ 0.223508] [mem 0x90000000-0xfbffbfff] available for PCI devices [ 0.223512] Booting kernel on Xen [ 0.223513] Xen version: 4.18.3-pre (preserve-AD) [ 0.223516] clocksource: refined-jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 1910969940391419 ns [ 0.229819] setup_percpu: NR_CPUS:64 nr_cpumask_bits:8 nr_cpu_ids:8 nr_node_ids:1 [ 0.230103] percpu: Embedded 54 pages/cpu s180520 r8192 d32472 u262144 [ 0.230110] pcpu-alloc: s180520 r8192 d32472 u262144 alloc=1*2097152 [ 0.230113] pcpu-alloc: [0] 0 1 2 3 4 5 6 7 [ 0.230195] xen: PV spinlocks enabled [ 0.230198] PV qspinlock hash table entries: 256 (order: 0, 4096 bytes, linear) [ 0.230203] Built 1 zonelists, mobility grouping on. Total pages: 129006 [ 0.230205] Kernel command line: placeholder root=/dev/mapper/debina0--vg-root ro console=hvc0 [ 0.230243] Unknown kernel command line parameters "placeholder", will be passed to user space. [ 0.230253] random: crng init done [ 0.230302] Dentry cache hash table entries: 65536 (order: 7, 524288 bytes, linear) [ 0.230327] Inode-cache hash table entries: 32768 (order: 6, 262144 bytes, linear) [ 0.231651] mem auto-init: stack:all(zero), heap alloc:off, heap free:off [ 0.231653] software IO TLB: area num 8. [ 0.291052] Memory: 390032K/524284K available (14349K kernel code, 2682K rwdata, 4576K rodata, 1576K init, 1296K bss, 134000K reserved, 0K cma-reserved) [ 0.291220] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=8, Nodes=1 [ 0.293703] Dynamic Preempt: voluntary [ 0.293803] rcu: Preemptible hierarchical RCU implementation. [ 0.293804] rcu: RCU event tracing is enabled. [ 0.293804] rcu: RCU restricting CPUs from NR_CPUS=64 to nr_cpu_ids=8. [ 0.293806] Trampoline variant of Tasks RCU enabled. [ 0.293807] rcu: RCU calculated value of scheduler-enlistment delay is 100 jiffies. [ 0.293808] rcu: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=8 [ 0.304412] NR_IRQS: 4352, nr_irqs: 488, preallocated irqs: 16 [ 0.304534] xen:events: Using FIFO-based ABI [ 0.304560] xen: --> pirq=1 -> irq=1 (gsi=1) [ 0.304568] xen: --> pirq=2 -> irq=2 (gsi=2) [ 0.304576] xen: --> pirq=3 -> irq=3 (gsi=3) [ 0.304583] xen: --> pirq=4 -> irq=4 (gsi=4) [ 0.304590] xen: --> pirq=5 -> irq=5 (gsi=5) [ 0.304598] xen: --> pirq=6 -> irq=6 (gsi=6) [ 0.304605] xen: --> pirq=7 -> irq=7 (gsi=7) [ 0.304612] xen: --> pirq=8 -> irq=8 (gsi=8) [ 0.304619] xen: --> pirq=9 -> irq=9 (gsi=9) [ 0.304626] xen: --> pirq=10 -> irq=10 (gsi=10) [ 0.304634] xen: --> pirq=11 -> irq=11 (gsi=11) [ 0.304641] xen: --> pirq=12 -> irq=12 (gsi=12) [ 0.304648] xen: --> pirq=13 -> irq=13 (gsi=13) [ 0.304656] xen: --> pirq=14 -> irq=14 (gsi=14) [ 0.304663] xen: --> pirq=15 -> irq=15 (gsi=15) [ 0.304674] rcu: srcu_init: Setting srcu_struct sizes based on contention. [ 0.310010] Console: colour VGA+ 80x25 [ 0.324686] printk: console [tty0] enabled [ 0.326004] printk: console [hvc0] enabled [ 0.326142] ACPI: Core revision 20220331 [ 0.341636] clocksource: xen: mask: 0xffffffffffffffff max_cycles: 0x1cd42e4dffb, max_idle_ns: 881590591483 ns [ 0.341802] Xen: using vcpuop timer interface [ 0.341809] installing Xen timer for CPU 0 [ 0.341958] clocksource: tsc-early: mask: 0xffffffffffffffff max_cycles: 0x1fb63109b96, max_idle_ns: 440795265316 ns [ 0.342116] Calibrating delay loop (skipped), value calculated using timer frequency.. 4399.99 BogoMIPS (lpj=2199998) [ 0.342447] Last level iTLB entries: 4KB 64, 2MB 8, 4MB 8 [ 0.342563] Last level dTLB entries: 4KB 64, 2MB 0, 4MB 0, 1GB 4 [ 0.342690] Spectre V1 : Mitigation: usercopy/swapgs barriers and __user pointer sanitization [ 0.342838] Spectre V2 : Mitigation: Retpolines [ 0.343123] Spectre V2 : Spectre v2 / SpectreRSB mitigation: Filling RSB on context switch [ 0.343287] Spectre V2 : Spectre v2 / SpectreRSB : Filling RSB on VMEXIT [ 0.343406] Spectre V2 : Enabling Restricted Speculation for firmware calls [ 0.343527] Spectre V2 : mitigation: Enabling conditional Indirect Branch Prediction Barrier [ 0.343674] Spectre V2 : User space: Mitigation: STIBP via prctl [ 0.343791] Speculative Store Bypass: Mitigation: Speculative Store Bypass disabled via prctl [ 0.343942] MDS: Mitigation: Clear CPU buffers [ 0.344055] TAA: Mitigation: Clear CPU buffers [ 0.344120] MMIO Stale Data: Vulnerable: Clear CPU buffers attempted, no microcode [ 0.344285] x86/fpu: Supporting XSAVE feature 0x001: 'x87 floating point registers' [ 0.344430] x86/fpu: Supporting XSAVE feature 0x002: 'SSE registers' [ 0.344555] x86/fpu: Supporting XSAVE feature 0x004: 'AVX registers' [ 0.344674] x86/fpu: xstate_offset[2]: 576, xstate_sizes[2]: 256 [ 0.344792] x86/fpu: Enabled xstate features 0x7, context size is 832 bytes, using 'standard' format. [ 0.362557] Freeing SMP alternatives memory: 40K [ 0.362684] pid_max: default: 32768 minimum: 301 [ 0.363138] LSM: Security Framework initializing [ 0.363260] SELinux: Initializing. [ 0.363399] Mount-cache hash table entries: 1024 (order: 1, 8192 bytes, linear) [ 0.363549] Mountpoint-cache hash table entries: 1024 (order: 1, 8192 bytes, linear) [ 0.364209] cpu 0 spinlock event irq 25 [ 0.364329] VPMU disabled by hypervisor. [ 0.364763] cblist_init_generic: Setting adjustable number of callback queues. [ 0.364909] cblist_init_generic: Setting shift to 3 and lim to 1. [ 0.365065] Performance Events: unsupported p6 CPU model 86 no PMU driver, software events only. [ 0.365121] signal: max sigframe size: 1776 [ 0.365283] rcu: Hierarchical SRCU implementation. [ 0.365409] rcu: Max phase no-delay instances is 400. [ 0.365900] smp: Bringing up secondary CPUs ... [ 0.366236] installing Xen timer for CPU 1 [ 0.366705] cpu 1 spinlock event irq 35 [ 0.367258] MDS CPU bug present and SMT on, data leak possible. See https://www.kernel.org/doc/html/latest/admin-guide/hw-vuln/mds.html for more details. [ 0.367426] TAA CPU bug present and SMT on, data leak possible. See https://www.kernel.org/doc/html/latest/admin-guide/hw-vuln/tsx_async_abort.html for more details. [ 0.367613] MMIO Stale Data CPU bug present and SMT on, data leak possible. See https://www.kernel.org/doc/html/latest/admin-guide/hw-vuln/processor_mmio_stale_data.html for more details. [ 0.368341] installing Xen timer for CPU 2 [ 0.368794] cpu 2 spinlock event irq 41 [ 0.369186] installing Xen timer for CPU 3 [ 0.369635] cpu 3 spinlock event irq 47 [ 0.369635] installing Xen timer for CPU 4 [ 0.370469] cpu 4 spinlock event irq 53 [ 0.370469] installing Xen timer for CPU 5 [ 0.371303] cpu 5 spinlock event irq 59 [ 0.371322] installing Xen timer for CPU 6 [ 0.372182] cpu 6 spinlock event irq 65 [ 0.372371] installing Xen timer for CPU 7 [ 0.372800] cpu 7 spinlock event irq 71 [ 0.373369] smp: Brought up 1 node, 8 CPUs [ 0.373486] smpboot: Max logical packages: 1 [ 0.373703] devtmpfs: initialized [ 0.373703] x86/mm: Memory block size: 128MB [ 0.374347] ACPI: PM: Registering ACPI NVS region [mem 0x799b7000-0x79e5afff] (4866048 bytes) [ 0.374383] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 1911260446275000 ns [ 0.374558] futex hash table entries: 2048 (order: 5, 131072 bytes, linear) [ 0.375120] PM: RTC time: 22:53:05, date: 2024-06-20 [ 0.375372] NET: Registered PF_NETLINK/PF_ROUTE protocol family [ 0.375515] xen:grant_table: Grant tables using version 1 layout [ 0.375650] Grant table initialized [ 0.375961] audit: initializing netlink subsys (disabled) [ 0.376141] audit: type=2000 audit(1718923986.579:1): state=initialized audit_enabled=0 res=1 [ 0.376187] thermal_sys: Registered thermal governor 'step_wise' [ 0.376187] thermal_sys: Registered thermal governor 'user_space' [ 0.376347] ACPI FADT declares the system doesn't support PCIe ASPM, so disable it [ 0.376780] PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0x80000000-0x8fffffff] (base 0x80000000) [ 0.377124] PCI: MMCONFIG at [mem 0x80000000-0x8fffffff] reserved in E820 [ 0.506072] PCI: Using configuration type 1 for base access [ 0.508664] kprobes: kprobe jump-optimization is enabled. All kprobes are optimized if possible. [ 0.509191] ACPI: Added _OSI(Module Device) [ 0.509293] ACPI: Added _OSI(Processor Device) [ 0.509406] ACPI: Added _OSI(3.0 _SCP Extensions) [ 0.509519] ACPI: Added _OSI(Processor Aggregator Device) [ 0.540037] ACPI: 4 ACPI AML tables successfully acquired and loaded [ 0.541971] xen: registering gsi 9 triggering 0 polarity 0 [ 0.544506] ACPI: Dynamic OEM Table Load: [ 0.548114] ACPI: Interpreter enabled [ 0.548114] ACPI: PM: (supports S0 S4 S5) [ 0.548114] ACPI: Using IOAPIC for interrupt routing [ 0.548114] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug [ 0.548114] PCI: Using E820 reservations for host bridge windows [ 0.549351] ACPI: Enabled 6 GPEs in block 00 to 3F [ 0.573710] ACPI: PCI Root Bridge [UNC0] (domain 0000 [bus ff]) [ 0.573838] acpi PNP0A03:03: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI HPX-Type3] [ 0.574074] acpi PNP0A03:03: _OSC: platform does not support [LTR] [ 0.574265] acpi PNP0A03:03: _OSC: OS now controls [PME PCIeCapability] [ 0.574385] acpi PNP0A03:03: FADT indicates ASPM is unsupported, using BIOS configuration [ 0.574561] PCI host bridge to bus 0000:ff [ 0.574673] pci_bus 0000:ff: root bus resource [bus ff] [ 0.574864] pci 0000:ff:0b.0: [8086:6f81] type 00 class 0x088000 [ 0.575308] pci 0000:ff:0b.1: [8086:6f36] type 00 class 0x110100 [ 0.575729] pci 0000:ff:0b.2: [8086:6f37] type 00 class 0x110100 [ 0.576146] pci 0000:ff:0b.3: [8086:6f76] type 00 class 0x088000 [ 0.576594] pci 0000:ff:0c.0: [8086:6fe0] type 00 class 0x088000 [ 0.577012] pci 0000:ff:0c.1: [8086:6fe1] type 00 class 0x088000 [ 0.577419] pci 0000:ff:0c.2: [8086:6fe2] type 00 class 0x088000 [ 0.577837] pci 0000:ff:0c.3: [8086:6fe3] type 00 class 0x088000 [ 0.578280] pci 0000:ff:0f.0: [8086:6ff8] type 00 class 0x088000 [ 0.578710] pci 0000:ff:0f.4: [8086:6ffc] type 00 class 0x088000 [ 0.579129] pci 0000:ff:0f.5: [8086:6ffd] type 00 class 0x088000 [ 0.579551] pci 0000:ff:0f.6: [8086:6ffe] type 00 class 0x088000 [ 0.579974] pci 0000:ff:10.0: [8086:6f1d] type 00 class 0x088000 [ 0.580394] pci 0000:ff:10.1: [8086:6f34] type 00 class 0x110100 [ 0.580825] pci 0000:ff:10.5: [8086:6f1e] type 00 class 0x088000 [ 0.581243] pci 0000:ff:10.6: [8086:6f7d] type 00 class 0x110100 [ 0.581661] pci 0000:ff:10.7: [8086:6f1f] type 00 class 0x088000 [ 0.582119] pci 0000:ff:12.0: [8086:6fa0] type 00 class 0x088000 [ 0.582373] pci 0000:ff:12.1: [8086:6f30] type 00 class 0x110100 [ 0.582828] pci 0000:ff:13.0: [8086:6fa8] type 00 class 0x088000 [ 0.583298] pci 0000:ff:13.1: [8086:6f71] type 00 class 0x088000 [ 0.583760] pci 0000:ff:13.2: [8086:6faa] type 00 class 0x088000 [ 0.583760] pci 0000:ff:13.3: [8086:6fab] type 00 class 0x088000 [ 0.583760] pci 0000:ff:13.4: [8086:6fac] type 00 class 0x088000 [ 0.584114] pci 0000:ff:13.5: [8086:6fad] type 00 class 0x088000 [ 0.584114] pci 0000:ff:13.6: [8086:6fae] type 00 class 0x088000 [ 0.584114] pci 0000:ff:13.7: [8086:6faf] type 00 class 0x088000 [ 0.585433] pci 0000:ff:14.0: [8086:6fb0] type 00 class 0x088000 [ 0.585895] pci 0000:ff:14.1: [8086:6fb1] type 00 class 0x088000 [ 0.586358] pci 0000:ff:14.2: [8086:6fb2] type 00 class 0x088000 [ 0.586819] pci 0000:ff:14.3: [8086:6fb3] type 00 class 0x088000 [ 0.587273] pci 0000:ff:14.4: [8086:6fbc] type 00 class 0x088000 [ 0.587693] pci 0000:ff:14.5: [8086:6fbd] type 00 class 0x088000 [ 0.588112] pci 0000:ff:14.6: [8086:6fbe] type 00 class 0x088000 [ 0.588530] pci 0000:ff:14.7: [8086:6fbf] type 00 class 0x088000 [ 0.588975] pci 0000:ff:15.0: [8086:6fb4] type 00 class 0x088000 [ 0.589437] pci 0000:ff:15.1: [8086:6fb5] type 00 class 0x088000 [ 0.589899] pci 0000:ff:15.2: [8086:6fb6] type 00 class 0x088000 [ 0.590362] pci 0000:ff:15.3: [8086:6fb7] type 00 class 0x088000 [ 0.590872] pci 0000:ff:1e.0: [8086:6f98] type 00 class 0x088000 [ 0.591294] pci 0000:ff:1e.1: [8086:6f99] type 00 class 0x088000 [ 0.591728] pci 0000:ff:1e.2: [8086:6f9a] type 00 class 0x088000 [ 0.592151] pci 0000:ff:1e.3: [8086:6fc0] type 00 class 0x088000 [ 0.592399] pci 0000:ff:1e.4: [8086:6f9c] type 00 class 0x088000 [ 0.592832] pci 0000:ff:1f.0: [8086:6f88] type 00 class 0x088000 [ 0.593259] pci 0000:ff:1f.2: [8086:6f8a] type 00 class 0x088000 [ 0.593681] pci_bus 0000:ff: on NUMA node 0 [ 0.597965] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-fe]) [ 0.598091] acpi PNP0A08:00: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI HPX-Type3] [ 0.598245] acpi PNP0A08:00: _OSC: platform does not support [PME LTR] [ 0.598584] acpi PNP0A08:00: _OSC: OS now controls [PCIeCapability] [ 0.598703] acpi PNP0A08:00: FADT indicates ASPM is unsupported, using BIOS configuration [ 0.599184] PCI host bridge to bus 0000:00 [ 0.599297] pci_bus 0000:00: root bus resource [io 0x0000-0x0cf7 window] [ 0.599418] pci_bus 0000:00: root bus resource [io 0x1000-0xffff window] [ 0.599538] pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff window] [ 0.599682] pci_bus 0000:00: root bus resource [mem 0x90000000-0xfbffbfff window] [ 0.599831] pci_bus 0000:00: root bus resource [bus 00-fe] [ 0.600019] pci 0000:00:00.0: [8086:6f00] type 00 class 0x060000 [ 0.600631] pci 0000:00:01.0: [8086:6f02] type 01 class 0x060400 [ 0.601146] pci 0000:00:01.0: PME# supported from D0 D3hot D3cold [ 0.601545] pci 0000:00:01.1: [8086:6f03] type 01 class 0x060400 [ 0.602059] pci 0000:00:01.1: PME# supported from D0 D3hot D3cold [ 0.602386] pci 0000:00:02.0: [8086:6f04] type 01 class 0x060400 [ 0.602905] pci 0000:00:02.0: PME# supported from D0 D3hot D3cold [ 0.603260] pci 0000:00:02.2: [8086:6f06] type 01 class 0x060400 [ 0.603769] pci 0000:00:02.2: PME# supported from D0 D3hot D3cold [ 0.604148] pci 0000:00:03.0: [8086:6f08] type 01 class 0x060400 [ 0.604666] pci 0000:00:03.0: PME# supported from D0 D3hot D3cold [ 0.605035] pci 0000:00:03.2: [8086:6f0a] type 01 class 0x060400 [ 0.605514] pci 0000:00:03.2: PME# supported from D0 D3hot D3cold [ 0.605881] pci 0000:00:05.0: [8086:6f28] type 00 class 0x088000 [ 0.606452] pci 0000:00:05.1: [8086:6f29] type 00 class 0x088000 [ 0.607072] pci 0000:00:05.2: [8086:6f2a] type 00 class 0x088000 [ 0.607659] pci 0000:00:14.0: [8086:8c31] type 00 class 0x0c0330 [ 0.607874] pci 0000:00:14.0: reg 0x10: [mem 0xfb600000-0xfb60ffff 64bit] [ 0.608357] pci 0000:00:14.0: PME# supported from D3hot D3cold [ 0.608697] pci 0000:00:16.0: [8086:8c3a] type 00 class 0x078000 [ 0.608913] pci 0000:00:16.0: reg 0x10: [mem 0xfb617000-0xfb61700f 64bit] [ 0.609372] pci 0000:00:16.0: PME# supported from D0 D3hot D3cold [ 0.609674] pci 0000:00:16.1: [8086:8c3b] type 00 class 0x078000 [ 0.609889] pci 0000:00:16.1: reg 0x10: [mem 0xfb616000-0xfb61600f 64bit] [ 0.610347] pci 0000:00:16.1: PME# supported from D0 D3hot D3cold [ 0.610703] pci 0000:00:1a.0: [8086:8c2d] type 00 class 0x0c0320 [ 0.610898] pci 0000:00:1a.0: reg 0x10: [mem 0xfb614000-0xfb6143ff] [ 0.611427] pci 0000:00:1a.0: PME# supported from D0 D3hot D3cold [ 0.611742] pci 0000:00:1c.0: [8086:8c10] type 01 class 0x060400 [ 0.612288] pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold [ 0.612486] pci 0000:00:1c.0: Enabling MPC IRBNCE [ 0.612607] pci 0000:00:1c.0: Intel PCH root port ACS workaround enabled [ 0.620289] pci 0000:00:1c.1: [8086:8c12] type 01 class 0x060400 [ 0.620836] pci 0000:00:1c.1: PME# supported from D0 D3hot D3cold [ 0.621030] pci 0000:00:1c.1: Enabling MPC IRBNCE [ 0.621128] pci 0000:00:1c.1: Intel PCH root port ACS workaround enabled [ 0.621416] pci 0000:00:1c.3: [8086:8c16] type 01 class 0x060400 [ 0.621970] pci 0000:00:1c.3: PME# supported from D0 D3hot D3cold [ 0.622163] pci 0000:00:1c.3: Enabling MPC IRBNCE [ 0.622284] pci 0000:00:1c.3: Intel PCH root port ACS workaround enabled [ 0.622566] pci 0000:00:1c.4: [8086:8c18] type 01 class 0x060400 [ 0.623120] pci 0000:00:1c.4: PME# supported from D0 D3hot D3cold [ 0.623313] pci 0000:00:1c.4: Enabling MPC IRBNCE [ 0.623434] pci 0000:00:1c.4: Intel PCH root port ACS workaround enabled [ 0.623755] pci 0000:00:1d.0: [8086:8c26] type 00 class 0x0c0320 [ 0.623950] pci 0000:00:1d.0: reg 0x10: [mem 0xfb613000-0xfb6133ff] [ 0.624486] pci 0000:00:1d.0: PME# supported from D0 D3hot D3cold [ 0.624808] pci 0000:00:1f.0: [8086:8c54] type 00 class 0x060100 [ 0.625555] pci 0000:00:1f.2: [8086:8c02] type 00 class 0x010601 [ 0.625755] pci 0000:00:1f.2: reg 0x10: [io 0xf070-0xf077] [ 0.625912] pci 0000:00:1f.2: reg 0x14: [io 0xf060-0xf063] [ 0.626068] pci 0000:00:1f.2: reg 0x18: [io 0xf050-0xf057] [ 0.626160] pci 0000:00:1f.2: reg 0x1c: [io 0xf040-0xf043] [ 0.626317] pci 0000:00:1f.2: reg 0x20: [io 0xf020-0xf03f] [ 0.626473] pci 0000:00:1f.2: reg 0x24: [mem 0xfb612000-0xfb6127ff] [ 0.626781] pci 0000:00:1f.2: PME# supported from D3hot [ 0.627063] pci 0000:00:1f.3: [8086:8c22] type 00 class 0x0c0500 [ 0.627215] pci 0000:00:1f.3: reg 0x10: [mem 0xfb611000-0xfb6110ff 64bit] [ 0.627458] pci 0000:00:1f.3: reg 0x20: [io 0xf000-0xf01f] [ 0.627833] pci 0000:00:1f.6: [8086:8c24] type 00 class 0x118000 [ 0.628050] pci 0000:00:1f.6: reg 0x10: [mem 0xfb610000-0xfb610fff 64bit] [ 0.628709] pci 0000:00:01.0: PCI bridge to [bus 01] [ 0.629000] pci 0000:00:01.1: PCI bridge to [bus 02] [ 0.629329] pci 0000:03:00.0: [8086:6f50] type 00 class 0x088000 [ 0.629539] pci 0000:03:00.0: reg 0x10: [mem 0xfb506000-0xfb507fff 64bit] [ 0.630283] pci 0000:03:00.1: [8086:6f51] type 00 class 0x088000 [ 0.630494] pci 0000:03:00.1: reg 0x10: [mem 0xfb504000-0xfb505fff 64bit] [ 0.631195] pci 0000:03:00.2: [8086:6f52] type 00 class 0x088000 [ 0.631406] pci 0000:03:00.2: reg 0x10: [mem 0xfb502000-0xfb503fff 64bit] [ 0.632101] pci 0000:03:00.3: [8086:6f53] type 00 class 0x088000 [ 0.632211] pci 0000:03:00.3: reg 0x10: [mem 0xfb500000-0xfb501fff 64bit] [ 0.632907] pci 0000:00:02.0: PCI bridge to [bus 03] [ 0.633041] pci 0000:00:02.0: bridge window [mem 0xfb500000-0xfb5fffff] [ 0.633336] pci 0000:04:00.0: [8086:15ac] type 00 class 0x020000 [ 0.633546] pci 0000:04:00.0: reg 0x10: [mem 0xfbc00000-0xfbdfffff 64bit pref] [ 0.633834] pci 0000:04:00.0: reg 0x20: [mem 0xfbe04000-0xfbe07fff 64bit pref] [ 0.634017] pci 0000:04:00.0: reg 0x30: [mem 0xfb480000-0xfb4fffff pref] [ 0.634349] pci 0000:04:00.0: PME# supported from D0 D3hot D3cold [ 0.634569] pci 0000:04:00.0: reg 0x184: [mem 0x00000000-0x00003fff 64bit] [ 0.634690] pci 0000:04:00.0: VF(n) BAR0 space: [mem 0x00000000-0x000fffff 64bit] (contains BAR0 for 64 VFs) [ 0.634893] pci 0000:04:00.0: reg 0x190: [mem 0x00000000-0x00003fff 64bit] [ 0.635046] pci 0000:04:00.0: VF(n) BAR3 space: [mem 0x00000000-0x000fffff 64bit] (contains BAR3 for 64 VFs) [ 0.635538] pci 0000:04:00.1: [8086:15ac] type 00 class 0x020000 [ 0.635750] pci 0000:04:00.1: reg 0x10: [mem 0xfba00000-0xfbbfffff 64bit pref] [ 0.636032] pci 0000:04:00.1: reg 0x20: [mem 0xfbe00000-0xfbe03fff 64bit pref] [ 0.636159] pci 0000:04:00.1: reg 0x30: [mem 0xfb400000-0xfb47ffff pref] [ 0.636530] pci 0000:04:00.1: PME# supported from D0 D3hot D3cold [ 0.636731] pci 0000:04:00.1: reg 0x184: [mem 0x00000000-0x00003fff 64bit] [ 0.636852] pci 0000:04:00.1: VF(n) BAR0 space: [mem 0x00000000-0x000fffff 64bit] (contains BAR0 for 64 VFs) [ 0.637054] pci 0000:04:00.1: reg 0x190: [mem 0x00000000-0x00003fff 64bit] [ 0.637119] pci 0000:04:00.1: VF(n) BAR3 space: [mem 0x00000000-0x000fffff 64bit] (contains BAR3 for 64 VFs) [ 0.637671] pci 0000:00:02.2: PCI bridge to [bus 04] [ 0.637804] pci 0000:00:02.2: bridge window [mem 0xfb400000-0xfb4fffff] [ 0.637942] pci 0000:00:02.2: bridge window [mem 0xfba00000-0xfbefffff 64bit pref] [ 0.638223] pci 0000:00:03.0: PCI bridge to [bus 05] [ 0.638512] pci 0000:00:03.2: PCI bridge to [bus 06] [ 0.638876] pci 0000:07:00.0: working around ROM BAR overlap defect [ 0.638995] pci 0000:07:00.0: [8086:1533] type 00 class 0x020000 [ 0.639200] pci 0000:07:00.0: reg 0x10: [mem 0xfb300000-0xfb37ffff] [ 0.639415] pci 0000:07:00.0: reg 0x18: [io 0xe000-0xe01f] [ 0.639579] pci 0000:07:00.0: reg 0x1c: [mem 0xfb380000-0xfb383fff] [ 0.640104] pci 0000:07:00.0: PME# supported from D0 D3hot D3cold [ 0.640468] pci 0000:00:1c.0: PCI bridge to [bus 07] [ 0.640593] pci 0000:00:1c.0: bridge window [io 0xe000-0xefff] [ 0.640721] pci 0000:00:1c.0: bridge window [mem 0xfb300000-0xfb3fffff] [ 0.641069] pci 0000:08:00.0: working around ROM BAR overlap defect [ 0.641120] pci 0000:08:00.0: [8086:1533] type 00 class 0x020000 [ 0.641324] pci 0000:08:00.0: reg 0x10: [mem 0xfb200000-0xfb27ffff] [ 0.641544] pci 0000:08:00.0: reg 0x18: [io 0xd000-0xd01f] [ 0.641708] pci 0000:08:00.0: reg 0x1c: [mem 0xfb280000-0xfb283fff] [ 0.642235] pci 0000:08:00.0: PME# supported from D0 D3hot D3cold [ 0.642694] pci 0000:00:1c.1: PCI bridge to [bus 08] [ 0.642824] pci 0000:00:1c.1: bridge window [io 0xd000-0xdfff] [ 0.642954] pci 0000:00:1c.1: bridge window [mem 0xfb200000-0xfb2fffff] [ 0.643292] pci 0000:09:00.0: [1a03:1150] type 01 class 0x060400 [ 0.643680] pci 0000:09:00.0: enabling Extended Tags [ 0.644018] pci 0000:09:00.0: supports D1 D2 [ 0.644119] pci 0000:09:00.0: PME# supported from D0 D1 D2 D3hot D3cold [ 0.644478] pci 0000:00:1c.3: PCI bridge to [bus 09-0a] [ 0.644603] pci 0000:00:1c.3: bridge window [io 0xc000-0xcfff] [ 0.644731] pci 0000:00:1c.3: bridge window [mem 0xfa000000-0xfb0fffff] [ 0.645030] pci_bus 0000:0a: extended config space not accessible [ 0.645171] pci 0000:0a:00.0: [1a03:2000] type 00 class 0x030000 [ 0.645374] pci 0000:0a:00.0: reg 0x10: [mem 0xfa000000-0xfaffffff] [ 0.645545] pci 0000:0a:00.0: reg 0x14: [mem 0xfb000000-0xfb01ffff] [ 0.645711] pci 0000:0a:00.0: reg 0x18: [io 0xc000-0xc07f] [ 0.646061] pci 0000:0a:00.0: Video device with shadowed ROM at [mem 0x000c0000-0x000dffff] [ 0.646260] pci 0000:0a:00.0: supports D1 D2 [ 0.646372] pci 0000:0a:00.0: PME# supported from D0 D1 D2 D3hot D3cold [ 0.646805] pci 0000:09:00.0: PCI bridge to [bus 0a] [ 0.646960] pci 0000:09:00.0: bridge window [io 0xc000-0xcfff] [ 0.647089] pci 0000:09:00.0: bridge window [mem 0xfa000000-0xfb0fffff] [ 0.647382] pci 0000:0b:00.0: [8086:1521] type 00 class 0x020000 [ 0.647581] pci 0000:0b:00.0: reg 0x10: [mem 0xfb160000-0xfb17ffff] [ 0.647788] pci 0000:0b:00.0: reg 0x18: [io 0xb060-0xb07f] [ 0.647948] pci 0000:0b:00.0: reg 0x1c: [mem 0xfb18c000-0xfb18ffff] [ 0.648462] pci 0000:0b:00.0: PME# supported from D0 D3hot D3cold [ 0.648695] pci 0000:0b:00.0: reg 0x184: [mem 0x00000000-0x00003fff 64bit pref] [ 0.648839] pci 0000:0b:00.0: VF(n) BAR0 space: [mem 0x00000000-0x0001ffff 64bit pref] (contains BAR0 for 8 VFs) [ 0.649056] pci 0000:0b:00.0: reg 0x190: [mem 0x00000000-0x00003fff 64bit pref] [ 0.649119] pci 0000:0b:00.0: VF(n) BAR3 space: [mem 0x00000000-0x0001ffff 64bit pref] (contains BAR3 for 8 VFs) [ 0.649694] pci 0000:0b:00.1: [8086:1521] type 00 class 0x020000 [ 0.649893] pci 0000:0b:00.1: reg 0x10: [mem 0xfb140000-0xfb15ffff] [ 0.650101] pci 0000:0b:00.1: reg 0x18: [io 0xb040-0xb05f] [ 0.650164] pci 0000:0b:00.1: reg 0x1c: [mem 0xfb188000-0xfb18bfff] [ 0.650671] pci 0000:0b:00.1: PME# supported from D0 D3hot D3cold [ 0.650912] pci 0000:0b:00.1: reg 0x184: [mem 0x00000000-0x00003fff 64bit pref] [ 0.651056] pci 0000:0b:00.1: VF(n) BAR0 space: [mem 0x00000000-0x0001ffff 64bit pref] (contains BAR0 for 8 VFs) [ 0.651182] pci 0000:0b:00.1: reg 0x190: [mem 0x00000000-0x00003fff 64bit pref] [ 0.651326] pci 0000:0b:00.1: VF(n) BAR3 space: [mem 0x00000000-0x0001ffff 64bit pref] (contains BAR3 for 8 VFs) [ 0.651843] pci 0000:0b:00.2: [8086:1521] type 00 class 0x020000 [ 0.652046] pci 0000:0b:00.2: reg 0x10: [mem 0xfb120000-0xfb13ffff] [ 0.652208] pci 0000:0b:00.2: reg 0x18: [io 0xb020-0xb03f] [ 0.652368] pci 0000:0b:00.2: reg 0x1c: [mem 0xfb184000-0xfb187fff] [ 0.652873] pci 0000:0b:00.2: PME# supported from D0 D3hot D3cold [ 0.653100] pci 0000:0b:00.2: reg 0x184: [mem 0x00000000-0x00003fff 64bit pref] [ 0.653119] pci 0000:0b:00.2: VF(n) BAR0 space: [mem 0x00000000-0x0001ffff 64bit pref] (contains BAR0 for 8 VFs) [ 0.653342] pci 0000:0b:00.2: reg 0x190: [mem 0x00000000-0x00003fff 64bit pref] [ 0.653486] pci 0000:0b:00.2: VF(n) BAR3 space: [mem 0x00000000-0x0001ffff 64bit pref] (contains BAR3 for 8 VFs) [ 0.654001] pci 0000:0b:00.3: [8086:1521] type 00 class 0x020000 [ 0.654199] pci 0000:0b:00.3: reg 0x10: [mem 0xfb100000-0xfb11ffff] [ 0.654407] pci 0000:0b:00.3: reg 0x18: [io 0xb000-0xb01f] [ 0.654572] pci 0000:0b:00.3: reg 0x1c: [mem 0xfb180000-0xfb183fff] [ 0.655077] pci 0000:0b:00.3: PME# supported from D0 D3hot D3cold [ 0.655228] pci 0000:0b:00.3: reg 0x184: [mem 0x00000000-0x00003fff 64bit pref] [ 0.655372] pci 0000:0b:00.3: VF(n) BAR0 space: [mem 0x00000000-0x0001ffff 64bit pref] (contains BAR0 for 8 VFs) [ 0.655588] pci 0000:0b:00.3: reg 0x190: [mem 0x00000000-0x00003fff 64bit pref] [ 0.655732] pci 0000:0b:00.3: VF(n) BAR3 space: [mem 0x00000000-0x0001ffff 64bit pref] (contains BAR3 for 8 VFs) [ 0.656319] pci 0000:00:1c.4: PCI bridge to [bus 0b] [ 0.656444] pci 0000:00:1c.4: bridge window [io 0xb000-0xbfff] [ 0.656572] pci 0000:00:1c.4: bridge window [mem 0xfb100000-0xfb1fffff] [ 0.656711] pci 0000:00:1c.4: bridge has subordinate 0b but max busn 0c [ 0.657174] pci_bus 0000:00: on NUMA node 0 [ 0.657268] xen: registering gsi 13 triggering 1 polarity 0 [ 0.658264] ACPI: PCI: Interrupt link LNKA configured for IRQ 11 [ 0.658459] ACPI: PCI: Interrupt link LNKB configured for IRQ 10 [ 0.658648] ACPI: PCI: Interrupt link LNKC configured for IRQ 5 [ 0.658834] ACPI: PCI: Interrupt link LNKD configured for IRQ 11 [ 0.659020] ACPI: PCI: Interrupt link LNKE configured for IRQ 0 [ 0.659120] ACPI: PCI: Interrupt link LNKE disabled [ 0.659303] ACPI: PCI: Interrupt link LNKF configured for IRQ 0 [ 0.659421] ACPI: PCI: Interrupt link LNKF disabled [ 0.659602] ACPI: PCI: Interrupt link LNKG configured for IRQ 0 [ 0.659720] ACPI: PCI: Interrupt link LNKG disabled [ 0.659901] ACPI: PCI: Interrupt link LNKH configured for IRQ 0 [ 0.660024] ACPI: PCI: Interrupt link LNKH disabled [ 0.660270] xen:balloon: Initialising balloon driver [ 0.661209] iommu: Default domain type: Translated [ 0.668123] iommu: DMA domain TLB invalidation policy: lazy mode [ 0.668310] SCSI subsystem initialized [ 0.669151] libata version 3.00 loaded. [ 0.669157] ACPI: bus type USB registered [ 0.669284] usbcore: registered new interface driver usbfs [ 0.669406] usbcore: registered new interface driver hub [ 0.669526] usbcore: registered new device driver usb [ 0.669652] pps_core: LinuxPPS API ver. 1 registered [ 0.669652] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti [ 0.669652] PTP clock support registered [ 0.670184] Advanced Linux Sound Architecture Driver Initialized. [ 0.670441] NetLabel: Initializing [ 0.670552] NetLabel: domain hash size = 128 [ 0.670664] NetLabel: protocols = UNLABELED CIPSOv4 CALIPSO [ 0.670664] NetLabel: unlabeled traffic allowed by default [ 0.671152] PCI: Using ACPI for IRQ routing [ 0.705123] PCI: pci_cache_line_size set to 64 bytes [ 0.705887] e820: reserve RAM buffer [mem 0x0009a000-0x0009ffff] [ 0.705890] e820: reserve RAM buffer [mem 0x20066000-0x23ffffff] [ 0.706160] pci 0000:0a:00.0: vgaarb: setting as boot VGA device [ 0.706281] pci 0000:0a:00.0: vgaarb: bridge control possible [ 0.706402] pci 0000:0a:00.0: vgaarb: VGA device added: decodes=io+mem,owns=io+mem,locks=none [ 0.707120] vgaarb: loaded [ 0.708890] clocksource: Switched to clocksource tsc-early [ 0.709110] VFS: Disk quotas dquot_6.6.0 [ 0.709110] VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes) [ 0.709110] hugetlbfs: disabling because there are no supported hugepage sizes [ 0.709110] pnp: PnP ACPI init [ 0.709260] xen: registering gsi 8 triggering 1 polarity 0 [ 0.709366] system 00:01: [io 0x0500-0x057f] has been reserved [ 0.709366] system 00:01: [io 0x0400-0x047f] has been reserved [ 0.709366] system 00:01: [io 0x0580-0x059f] has been reserved [ 0.709366] system 00:01: [io 0x0600-0x061f] has been reserved [ 0.709366] system 00:01: [io 0x0880-0x0883] has been reserved [ 0.709366] system 00:01: [io 0x0800-0x081f] has been reserved [ 0.710221] system 00:01: [mem 0xfed1c000-0xfed3ffff] could not be reserved [ 0.710344] system 00:01: [mem 0xfed45000-0xfed8bfff] has been reserved [ 0.710464] system 00:01: [mem 0xff000000-0xffffffff] has been reserved [ 0.710583] system 00:01: [mem 0xfee00000-0xfeefffff] has been reserved [ 0.710703] system 00:01: [mem 0xfed12000-0xfed1200f] has been reserved [ 0.710822] system 00:01: [mem 0xfed12010-0xfed1201f] has been reserved [ 0.710941] system 00:01: [mem 0xfed1b000-0xfed1bfff] has been reserved [ 0.711359] system 00:02: [io 0x0a00-0x0a0f] has been reserved [ 0.711481] system 00:02: [io 0x0a10-0x0a1f] has been reserved [ 0.711598] system 00:02: [io 0x0a20-0x0a2f] has been reserved [ 0.711721] system 00:02: [io 0x0a30-0x0a3f] has been reserved [ 0.711839] system 00:02: [io 0x0a40-0x0a4f] has been reserved [ 0.712280] xen: registering gsi 4 triggering 1 polarity 0 [ 0.712286] Already setup the GSI :4 [ 0.712398] pnp 00:03: [dma 0 disabled] [ 0.712711] xen: registering gsi 3 triggering 1 polarity 0 [ 0.712723] pnp 00:04: [dma 0 disabled] [ 0.713331] pnp: PnP ACPI: found 5 devices [ 0.742467] PM-Timer failed consistency check (0xffffff) - aborting. [ 0.742660] NET: Registered PF_INET protocol family [ 0.742824] IP idents hash table entries: 8192 (order: 4, 65536 bytes, linear) [ 0.743220] tcp_listen_portaddr_hash hash table entries: 256 (order: 0, 4096 bytes, linear) [ 0.743373] Table-perturb hash table entries: 65536 (order: 6, 262144 bytes, linear) [ 0.743520] TCP established hash table entries: 4096 (order: 3, 32768 bytes, linear) [ 0.743670] TCP bind hash table entries: 4096 (order: 5, 131072 bytes, linear) [ 0.743838] TCP: Hash tables configured (established 4096 bind 4096) [ 0.743979] UDP hash table entries: 256 (order: 1, 8192 bytes, linear) [ 0.744101] UDP-Lite hash table entries: 256 (order: 1, 8192 bytes, linear) [ 0.744302] NET: Registered PF_UNIX/PF_LOCAL protocol family [ 0.744677] RPC: Registered named UNIX socket transport module. [ 0.744802] RPC: Registered udp transport module. [ 0.744915] RPC: Registered tcp transport module. [ 0.745028] RPC: Registered tcp NFSv4.1 backchannel transport module. [ 0.745594] pci 0000:00:1c.4: bridge window [mem 0x00100000-0x000fffff 64bit pref] to [bus 0b] add_size 100000 add_align 100000 [ 0.745779] clipped [mem size 0x00000000 64bit pref] to [mem size 0xfffffffffffa0000 64bit pref] for e820 entry [mem 0x0009ac00-0x000fffff] [ 0.745942] clipped [mem size 0x00020000 64bit pref] to [mem size 0xfffffffffffc0000 64bit pref] for e820 entry [mem 0x0009ac00-0x000fffff] [ 0.746103] pci 0000:00:1c.4: BAR 15: assigned [mem 0x90000000-0x900fffff 64bit pref] [ 0.746275] pci 0000:00:01.0: PCI bridge to [bus 01] [ 0.746451] pci 0000:00:01.1: PCI bridge to [bus 02] [ 0.746623] pci 0000:00:02.0: PCI bridge to [bus 03] [ 0.746757] pci 0000:00:02.0: bridge window [mem 0xfb500000-0xfb5fffff] [ 0.746918] pci 0000:04:00.0: BAR 7: no space for [mem size 0x00100000 64bit] [ 0.747041] pci 0000:04:00.0: BAR 7: failed to assign [mem size 0x00100000 64bit] [ 0.747204] pci 0000:04:00.0: BAR 10: no space for [mem size 0x00100000 64bit] [ 0.747348] pci 0000:04:00.0: BAR 10: failed to assign [mem size 0x00100000 64bit] [ 0.747492] pci 0000:04:00.1: BAR 7: no space for [mem size 0x00100000 64bit] [ 0.747614] pci 0000:04:00.1: BAR 7: failed to assign [mem size 0x00100000 64bit] [ 0.747758] pci 0000:04:00.1: BAR 10: no space for [mem size 0x00100000 64bit] [ 0.747901] pci 0000:04:00.1: BAR 10: failed to assign [mem size 0x00100000 64bit] [ 0.748046] pci 0000:04:00.0: BAR 7: no space for [mem size 0x00100000 64bit] [ 0.748189] pci 0000:04:00.0: BAR 7: failed to assign [mem size 0x00100000 64bit] [ 0.748341] pci 0000:04:00.0: BAR 10: no space for [mem size 0x00100000 64bit] [ 0.748484] pci 0000:04:00.0: BAR 10: failed to assign [mem size 0x00100000 64bit] [ 0.748632] pci 0000:04:00.1: BAR 7: no space for [mem size 0x00100000 64bit] [ 0.748754] pci 0000:04:00.1: BAR 7: failed to assign [mem size 0x00100000 64bit] [ 0.748898] pci 0000:04:00.1: BAR 10: no space for [mem size 0x00100000 64bit] [ 0.749041] pci 0000:04:00.1: BAR 10: failed to assign [mem size 0x00100000 64bit] [ 0.749211] pci 0000:00:02.2: PCI bridge to [bus 04] [ 0.749350] pci 0000:00:02.2: bridge window [mem 0xfb400000-0xfb4fffff] [ 0.749483] pci 0000:00:02.2: bridge window [mem 0xfba00000-0xfbefffff 64bit pref] [ 0.749653] pci 0000:00:03.0: PCI bridge to [bus 05] [ 0.749825] pci 0000:00:03.2: PCI bridge to [bus 06] [ 0.750004] pci 0000:00:1c.0: PCI bridge to [bus 07] [ 0.750135] pci 0000:00:1c.0: bridge window [io 0xe000-0xefff] [ 0.750276] pci 0000:00:1c.0: bridge window [mem 0xfb300000-0xfb3fffff] [ 0.750437] pci 0000:00:1c.1: PCI bridge to [bus 08] [ 0.750555] pci 0000:00:1c.1: bridge window [io 0xd000-0xdfff] [ 0.750693] pci 0000:00:1c.1: bridge window [mem 0xfb200000-0xfb2fffff] [ 0.750854] pci 0000:09:00.0: PCI bridge to [bus 0a] [ 0.750973] pci 0000:09:00.0: bridge window [io 0xc000-0xcfff] [ 0.751113] pci 0000:09:00.0: bridge window [mem 0xfa000000-0xfb0fffff] [ 0.751299] pci 0000:00:1c.3: PCI bridge to [bus 09-0a] [ 0.751426] pci 0000:00:1c.3: bridge window [io 0xc000-0xcfff] [ 0.751564] pci 0000:00:1c.3: bridge window [mem 0xfa000000-0xfb0fffff] [ 0.751728] pci 0000:0b:00.0: BAR 7: assigned [mem 0x90000000-0x9001ffff 64bit pref] [ 0.751885] pci 0000:0b:00.0: BAR 10: assigned [mem 0x90020000-0x9003ffff 64bit pref] [ 0.752037] pci 0000:0b:00.1: BAR 7: assigned [mem 0x90040000-0x9005ffff 64bit pref] [ 0.752221] pci 0000:0b:00.1: BAR 10: assigned [mem 0x90060000-0x9007ffff 64bit pref] [ 0.752376] pci 0000:0b:00.2: BAR 7: assigned [mem 0x90080000-0x9009ffff 64bit pref] [ 0.752528] pci 0000:0b:00.2: BAR 10: assigned [mem 0x900a0000-0x900bffff 64bit pref] [ 0.752682] pci 0000:0b:00.3: BAR 7: assigned [mem 0x900c0000-0x900dffff 64bit pref] [ 0.752860] pci 0000:0b:00.3: BAR 10: assigned [mem 0x900e0000-0x900fffff 64bit pref] [ 0.753013] pci 0000:00:1c.4: PCI bridge to [bus 0b] [ 0.753144] pci 0000:00:1c.4: bridge window [io 0xb000-0xbfff] [ 0.753298] pci 0000:00:1c.4: bridge window [mem 0xfb100000-0xfb1fffff] [ 0.753433] pci 0000:00:1c.4: bridge window [mem 0x90000000-0x900fffff 64bit pref] [ 0.753606] pci_bus 0000:00: Some PCI device resources are unassigned, try booting with pci=realloc [ 0.753755] pci_bus 0000:00: resource 4 [io 0x0000-0x0cf7 window] [ 0.753874] pci_bus 0000:00: resource 5 [io 0x1000-0xffff window] [ 0.753992] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff window] [ 0.754132] pci_bus 0000:00: resource 7 [mem 0x90000000-0xfbffbfff window] [ 0.754256] pci_bus 0000:03: resource 1 [mem 0xfb500000-0xfb5fffff] [ 0.754375] pci_bus 0000:04: resource 1 [mem 0xfb400000-0xfb4fffff] [ 0.754493] pci_bus 0000:04: resource 2 [mem 0xfba00000-0xfbefffff 64bit pref] [ 0.754637] pci_bus 0000:07: resource 0 [io 0xe000-0xefff] [ 0.754752] pci_bus 0000:07: resource 1 [mem 0xfb300000-0xfb3fffff] [ 0.754871] pci_bus 0000:08: resource 0 [io 0xd000-0xdfff] [ 0.754986] pci_bus 0000:08: resource 1 [mem 0xfb200000-0xfb2fffff] [ 0.755105] pci_bus 0000:09: resource 0 [io 0xc000-0xcfff] [ 0.755237] pci_bus 0000:09: resource 1 [mem 0xfa000000-0xfb0fffff] [ 0.755362] pci_bus 0000:0a: resource 0 [io 0xc000-0xcfff] [ 0.755485] pci_bus 0000:0a: resource 1 [mem 0xfa000000-0xfb0fffff] [ 0.755604] pci_bus 0000:0b: resource 0 [io 0xb000-0xbfff] [ 0.755719] pci_bus 0000:0b: resource 1 [mem 0xfb100000-0xfb1fffff] [ 0.755837] pci_bus 0000:0b: resource 2 [mem 0x90000000-0x900fffff 64bit pref] [ 0.756405] pci 0000:00:05.0: disabled boot interrupts on device [8086:6f28] [ 0.756628] xen: registering gsi 19 triggering 0 polarity 1 [ 0.756657] xen: --> pirq=19 -> irq=19 (gsi=19) [ 0.765485] xen: registering gsi 18 triggering 0 polarity 1 [ 0.765503] xen: --> pirq=18 -> irq=18 (gsi=18) [ 0.781311] pci 0000:00:1a.0: quirk_usb_early_handoff+0x0/0x720 took 15507 usecs [ 0.781551] xen: registering gsi 18 triggering 0 polarity 1 [ 0.781556] Already setup the GSI :18 [ 0.797331] pci 0000:00:1d.0: quirk_usb_early_handoff+0x0/0x720 took 15462 usecs [ 0.797544] pci 0000:04:00.0: CLS mismatch (64 != 32), using 64 bytes [ 0.797685] PCI-DMA: Using software bounce buffering for IO (SWIOTLB) [ 0.797762] Unpacking initramfs... [ 0.797804] software IO TLB: mapped [mem 0x000000001b180000-0x000000001f180000] (64MB) [ 0.798147] kvm: no hardware support for 'kvm_intel' [ 0.805920] has_svm: not amd or hygon [ 0.806035] kvm: no hardware support for 'kvm_amd' [ 0.806166] clocksource: tsc: mask: 0xffffffffffffffff max_cycles: 0x1fb63109b96, max_idle_ns: 440795265316 ns [ 0.806728] clocksource: Switched to clocksource tsc [ 0.809053] Initialise system trusted keyrings [ 0.809370] workingset: timestamp_bits=62 max_order=17 bucket_order=0 [ 0.810825] NFS: Registering the id_resolver key type [ 0.810949] Key type id_resolver registered [ 0.811060] Key type id_legacy registered [ 0.811260] 9p: Installing v9fs 9p2000 file system support [ 0.825521] Key type asymmetric registered [ 0.825646] Asymmetric key parser 'x509' registered [ 0.825783] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 251) [ 0.825938] io scheduler mq-deadline registered [ 0.826059] io scheduler kyber registered [ 0.826852] xen: registering gsi 16 triggering 0 polarity 1 [ 0.826882] xen: --> pirq=16 -> irq=16 (gsi=16) [ 0.827417] xen: registering gsi 16 triggering 0 polarity 1 [ 0.827423] Already setup the GSI :16 [ 0.828047] xen: registering gsi 16 triggering 0 polarity 1 [ 0.828052] Already setup the GSI :16 [ 0.828370] xen: registering gsi 16 triggering 0 polarity 1 [ 0.828374] Already setup the GSI :16 [ 0.828705] xen: registering gsi 16 triggering 0 polarity 1 [ 0.828714] Already setup the GSI :16 [ 0.829316] xen: registering gsi 16 triggering 0 polarity 1 [ 0.829321] Already setup the GSI :16 [ 0.829920] xen: registering gsi 16 triggering 0 polarity 1 [ 0.829925] Already setup the GSI :16 [ 0.830361] xen: registering gsi 17 triggering 0 polarity 1 [ 0.830378] xen: --> pirq=17 -> irq=17 (gsi=17) [ 0.830723] xen: registering gsi 19 triggering 0 polarity 1 [ 0.830728] Already setup the GSI :19 [ 0.831158] xen: registering gsi 16 triggering 0 polarity 1 [ 0.831163] Already setup the GSI :16 [ 0.831840] input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input0 [ 0.832015] ACPI: button: Power Button [PWRB] [ 0.832157] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input1 [ 0.832534] ACPI: button: Power Button [PWRF] [ 0.832838] Monitor-Mwait will be used to enter C-1 state [ 0.832872] Monitor-Mwait will be used to enter C-2 state [ 0.832888] ACPI: \_SB_.SCK0.CP00: Found 2 idle states [ 0.833384] ACPI: \_SB_.SCK0.CP01: Found 2 idle states [ 0.833749] ACPI: \_SB_.SCK0.CP02: Found 2 idle states [ 0.834201] ACPI: \_SB_.SCK0.CP03: Found 2 idle states [ 0.834681] ACPI: \_SB_.SCK0.CP04: Found 2 idle states [ 0.835035] ACPI: \_SB_.SCK0.CP05: Found 2 idle states [ 0.835482] ACPI: \_SB_.SCK0.CP06: Found 2 idle states [ 0.835949] ACPI: \_SB_.SCK0.CP07: Found 2 idle states [ 0.836745] xen:xen_evtchn: Event-channel device installed [ 0.836941] xen_pciback: backend is vpci [ 0.837617] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled [ 0.837920] 00:04: ttyS1 at I/O 0x2f8 (irq = 3, base_baud = 115200) is a 16550A [ 0.838666] hpet_acpi_add: no address or irqs in _CRS [ 0.838879] Non-volatile memory driver v1.3 [ 0.838992] AMD-Vi: AMD IOMMUv2 functionality not available on this system - This is not a bug. [ 0.841622] loop: module loaded [ 0.847984] ahci 0000:00:1f.2: version 3.0 [ 0.848086] xen: registering gsi 16 triggering 0 polarity 1 [ 0.848096] Already setup the GSI :16 [ 0.848465] ahci 0000:00:1f.2: AHCI 0001.0300 32 slots 6 ports 6 Gbps 0x3f impl SATA mode [ 0.848616] ahci 0000:00:1f.2: flags: 64bit ncq led clo pio ems apst [ 0.864070] scsi host0: ahci [ 0.864464] scsi host1: ahci [ 0.864794] scsi host2: ahci [ 0.865136] scsi host3: ahci [ 0.865537] scsi host4: ahci [ 0.865899] scsi host5: ahci [ 0.866056] ata1: SATA max UDMA/133 abar m2048@0xfb612000 port 0xfb612100 irq 75 [ 0.866203] ata2: SATA max UDMA/133 abar m2048@0xfb612000 port 0xfb612180 irq 75 [ 0.866353] ata3: SATA max UDMA/133 abar m2048@0xfb612000 port 0xfb612200 irq 75 [ 0.866514] ata4: SATA max UDMA/133 abar m2048@0xfb612000 port 0xfb612280 irq 75 [ 0.866658] ata5: SATA max UDMA/133 abar m2048@0xfb612000 port 0xfb612300 irq 75 [ 0.866801] ata6: SATA max UDMA/133 abar m2048@0xfb612000 port 0xfb612380 irq 75 [ 0.867236] tun: Universal TUN/TAP device driver, 1.6 [ 0.867493] e100: Intel(R) PRO/100 Network Driver [ 0.867631] e100: Copyright(c) 1999-2006 Intel Corporation [ 0.867772] sky2: driver version 1.30 [ 0.867957] xen_netfront: Initialising Xen virtual ethernet driver [ 0.868346] xen: registering gsi 18 triggering 0 polarity 1 [ 0.868355] Already setup the GSI :18 [ 0.868577] ehci-pci 0000:00:1a.0: EHCI Host Controller [ 0.868772] ehci-pci 0000:00:1a.0: new USB bus registered, assigned bus number 1 [ 0.868947] ehci-pci 0000:00:1a.0: debug port 2 [ 0.873090] ehci-pci 0000:00:1a.0: irq 18, io mem 0xfb614000 [ 0.879527] ehci-pci 0000:00:1a.0: USB 2.0 started, EHCI 1.00 [ 0.879758] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 6.01 [ 0.879906] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 0.880050] usb usb1: Product: EHCI Host Controller [ 0.880169] usb usb1: Manufacturer: Linux 6.1.94+ ehci_hcd [ 0.880284] usb usb1: SerialNumber: 0000:00:1a.0 [ 0.880569] hub 1-0:1.0: USB hub found [ 0.880694] hub 1-0:1.0: 2 ports detected [ 0.881066] xen: registering gsi 18 triggering 0 polarity 1 [ 0.881076] Already setup the GSI :18 [ 0.881270] ehci-pci 0000:00:1d.0: EHCI Host Controller [ 0.881526] ehci-pci 0000:00:1d.0: new USB bus registered, assigned bus number 2 [ 0.881701] ehci-pci 0000:00:1d.0: debug port 2 [ 0.885804] ehci-pci 0000:00:1d.0: irq 18, io mem 0xfb613000 [ 0.892512] ehci-pci 0000:00:1d.0: USB 2.0 started, EHCI 1.00 [ 0.892748] usb usb2: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 6.01 [ 0.892896] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 0.893040] usb usb2: Product: EHCI Host Controller [ 0.893154] usb usb2: Manufacturer: Linux 6.1.94+ ehci_hcd [ 0.893269] usb usb2: SerialNumber: 0000:00:1d.0 [ 0.893566] hub 2-0:1.0: USB hub found [ 0.893690] hub 2-0:1.0: 2 ports detected [ 0.894140] xen: registering gsi 19 triggering 0 polarity 1 [ 0.894151] Already setup the GSI :19 [ 0.894357] xhci_hcd 0000:00:14.0: xHCI Host Controller [ 0.894575] xhci_hcd 0000:00:14.0: new USB bus registered, assigned bus number 3 [ 0.895792] xhci_hcd 0000:00:14.0: hcc params 0x200077c1 hci version 0x100 quirks 0x0000000000009810 [ 0.896263] xhci_hcd 0000:00:14.0: xHCI Host Controller [ 0.896459] xhci_hcd 0000:00:14.0: new USB bus registered, assigned bus number 4 [ 0.896606] xhci_hcd 0000:00:14.0: Host supports USB 3.0 SuperSpeed [ 0.896817] usb usb3: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 6.01 [ 0.896965] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 0.897108] usb usb3: Product: xHCI Host Controller [ 0.897222] usb usb3: Manufacturer: Linux 6.1.94+ xhci-hcd [ 0.897337] usb usb3: SerialNumber: 0000:00:14.0 [ 0.897623] hub 3-0:1.0: USB hub found [ 0.897755] hub 3-0:1.0: 8 ports detected [ 0.898925] usb usb4: New USB device found, idVendor=1d6b, idProduct=0003, bcdDevice= 6.01 [ 0.899078] usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 0.899222] usb usb4: Product: xHCI Host Controller [ 0.899336] usb usb4: Manufacturer: Linux 6.1.94+ xhci-hcd [ 0.899464] usb usb4: SerialNumber: 0000:00:14.0 [ 0.899719] hub 4-0:1.0: USB hub found [ 0.899850] hub 4-0:1.0: 6 ports detected [ 0.901061] usbcore: registered new interface driver usblp [ 0.901206] usbcore: registered new interface driver usb-storage [ 0.901356] i8042: PNP: No PS/2 controller found. [ 0.901742] rtc_cmos 00:00: RTC can wake from S4 [ 0.902412] rtc_cmos 00:00: registered as rtc0 [ 0.902586] rtc_cmos 00:00: alarms up to one month, y3k, 114 bytes nvram [ 0.902784] Freeing initrd memory: 19884K [ 0.902809] device-mapper: uevent: version 1.0.3 [ 0.903015] xen: registering gsi 18 triggering 0 polarity 1 [ 0.903027] Already setup the GSI :18 [ 0.903098] device-mapper: ioctl: 4.47.0-ioctl (2022-07-28) initialised: dm-devel@redhat.com [ 0.903170] i801_smbus 0000:00:1f.3: SPD Write Disable is set [ 0.903289] intel_pstate: CPU model not supported [ 0.903321] i801_smbus 0000:00:1f.3: SMBus using PCI interrupt [ 0.903420] hid: raw HID events driver (C) Jiri Kosina [ 0.903903] usbcore: registered new interface driver usbhid [ 0.904019] usbhid: USB HID core driver [ 0.904078] i2c i2c-0: 1/4 memory slots populated (from DMI) [ 0.904546] Initializing XFRM netlink socket [ 0.904795] NET: Registered PF_INET6 protocol family [ 0.905286] Segment Routing with IPv6 [ 0.905405] In-situ OAM (IOAM) with IPv6 [ 0.905559] sit: IPv6, IPv4 and MPLS over IPv4 tunneling driver [ 0.905798] NET: Registered PF_PACKET protocol family [ 0.905950] 9pnet: Installing 9P2000 support [ 0.906077] Key type dns_resolver registered [ 0.906816] IPI shorthand broadcast: enabled [ 0.906955] sched_clock: Marking stable (869335897, 37438287)->(1754387432, -847613248) [ 0.907543] registered taskstats version 1 [ 0.907659] Loading compiled-in X.509 certificates [ 0.910384] PM: Magic number: 12:178:907 [ 0.910540] block nbd7: hash matches [ 0.910684] platform PNP0003:00: hash matches [ 0.910836] acpi PNP0003:00: hash matches [ 0.910980] printk: console [netcon0] enabled [ 0.911094] netconsole: network logging started [ 0.911431] cfg80211: Loading compiled-in X.509 certificates for regulatory database [ 0.923258] cfg80211: Loaded X.509 cert 'sforshee: 00b28ddf47aef9cea7' [ 0.923615] cfg80211: Loaded X.509 cert 'wens: 61c038651aabdcf94bd0ac7ff06c7248db18c600' [ 0.924273] cfg80211: loaded regulatory.db is malformed or signature is missing/invalid [ 0.924568] ALSA device list: [ 0.932199] No soundcards found. [ 1.119553] usb 1-1: new high-speed USB device number 2 using ehci-pci [ 1.135501] usb 3-3: new high-speed USB device number 2 using xhci_hcd [ 1.135737] usb 2-1: new high-speed USB device number 2 using ehci-pci [ 1.172299] ata2: SATA link down (SStatus 0 SControl 300) [ 1.172586] ata1: SATA link down (SStatus 0 SControl 300) [ 1.172848] ata3: SATA link up 6.0 Gbps (SStatus 133 SControl 300) [ 1.174052] ata3.00: ATA-10: HGST HUS722T1TALA604, RAGNWA05, max UDMA/133 [ 1.180028] ata4: SATA link down (SStatus 0 SControl 300) [ 1.180286] ata6: SATA link down (SStatus 0 SControl 300) [ 1.180417] ata5: SATA link down (SStatus 0 SControl 300) [ 1.248035] usb 1-1: New USB device found, idVendor=8087, idProduct=8008, bcdDevice= 0.05 [ 1.248189] usb 1-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0 [ 1.248602] hub 1-1:1.0: USB hub found [ 1.248783] hub 1-1:1.0: 4 ports detected [ 1.259096] ata3.00: 1953525168 sectors, multi 16: LBA48 NCQ (depth 32), AA [ 1.259337] ata3.00: Features: NCQ-sndrcv NCQ-prio [ 1.263221] usb 3-3: New USB device found, idVendor=05e3, idProduct=0610, bcdDevice=32.98 [ 1.263409] usb 3-3: New USB device strings: Mfr=0, Product=1, SerialNumber=0 [ 1.263546] usb 3-3: Product: USB2.0 Hub [ 1.264159] usb 2-1: New USB device found, idVendor=8087, idProduct=8000, bcdDevice= 0.05 [ 1.264347] usb 2-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0 [ 1.264564] hub 3-3:1.0: USB hub found [ 1.264944] hub 2-1:1.0: USB hub found [ 1.265068] hub 3-3:1.0: 4 ports detected [ 1.265323] hub 2-1:1.0: 4 ports detected [ 1.286862] ata3.00: configured for UDMA/133 [ 1.287149] scsi 2:0:0:0: Direct-Access ATA HGST HUS722T1TAL WA05 PQ: 0 ANSI: 5 [ 1.287713] sd 2:0:0:0: Attached scsi generic sg0 type 0 [ 1.287863] sd 2:0:0:0: [sda] 1953525168 512-byte logical blocks: (1.00 TB/932 GiB) [ 1.288051] sd 2:0:0:0: [sda] Write Protect is off [ 1.288172] sd 2:0:0:0: [sda] Mode Sense: 00 3a 00 00 [ 1.288236] sd 2:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 1.288468] sd 2:0:0:0: [sda] Preferred minimum I/O size 512 bytes [ 1.308234] sda: sda1 sda2 < sda5 > [ 1.308697] sd 2:0:0:0: [sda] Attached SCSI disk [ 1.309904] Freeing unused kernel image (initmem) memory: 1576K [ 1.310036] Write protecting the kernel read-only data: 22528k [ 1.328091] Freeing unused kernel image (text/rodata gap) memory: 2032K [ 1.329386] Freeing unused kernel image (rodata/data gap) memory: 1568K [ 1.381488] usb 3-4: new high-speed USB device number 3 using xhci_hcd [ 1.507756] usb 3-4: New USB device found, idVendor=0557, idProduct=7000, bcdDevice= 0.00 [ 1.507910] usb 3-4: New USB device strings: Mfr=0, Product=0, SerialNumber=0 [ 1.508547] hub 3-4:1.0: USB hub found [ 1.508757] hub 3-4:1.0: 4 ports detected [ 1.571501] usb 3-3.2: new high-speed USB device number 4 using xhci_hcd [ 1.648853] usb 3-3.2: New USB device found, idVendor=05e3, idProduct=0610, bcdDevice=32.98 [ 1.649007] usb 3-3.2: New USB device strings: Mfr=0, Product=1, SerialNumber=0 [ 1.649152] usb 3-3.2: Product: USB2.0 Hub [ 1.649800] hub 3-3.2:1.0: USB hub found [ 1.650229] hub 3-3.2:1.0: 4 ports detected [ 1.790342] x86/mm: Checked W+X mappings: passed, no W+X pages found. [ 1.790481] Run /init as init process [ 1.790591] with arguments: [ 1.790592] /init [ 1.790593] placeholder [ 1.790594] with environment: [ 1.790595] HOME=/ [ 1.790596] TERM=linux [ 1.802504] usb 3-4.1: new low-speed USB device number 5 using xhci_hcd [ 1.909777] usb 3-4.1: New USB device found, idVendor=0557, idProduct=2419, bcdDevice= 1.00 [ 1.909937] usb 3-4.1: New USB device strings: Mfr=0, Product=0, SerialNumber=0 [ 1.915969] input: HID 0557:2419 as /devices/pci0000:00/0000:00:14.0/usb3/3-4/3-4.1/3-4.1:1.0/0003:0557:2419.0001/input/input2 [ 1.968781] hid-generic 0003:0557:2419.0001: input,hidraw0: USB HID v1.00 Keyboard [HID 0557:2419] on usb-0000:00:14.0-4.1/input0 [ 1.971722] input: HID 0557:2419 as /devices/pci0000:00/0000:00:14.0/usb3/3-4/3-4.1/3-4.1:1.1/0003:0557:2419.0002/input/input3 [ 1.972039] hid-generic 0003:0557:2419.0002: input,hidraw1: USB HID v1.00 Mouse [HID 0557:2419] on usb-0000:00:14.0-4.1/input1 [ 2.250026] ixgbe: Intel(R) 10 Gigabit PCI Express Network Driver [ 2.250166] ixgbe: Copyright (c) 1999-2016 Intel Corporation. [ 2.250593] ACPI Warning: \_SB.PCI0.BR2C._PRT: Return Package has no elements (empty) (20220331/nsprepkg-94) [ 2.250857] xen: registering gsi 16 triggering 0 polarity 1 [ 2.250871] Already setup the GSI :16 [ 2.253313] igb: Intel(R) Gigabit Ethernet Network Driver [ 2.253437] igb: Copyright (c) 2007-2014 Intel Corporation. [ 2.253653] xen: registering gsi 16 triggering 0 polarity 1 [ 2.253660] Already setup the GSI :16 [ 2.279969] pps pps0: new PPS source ptp0 [ 2.280161] igb 0000:07:00.0: added PHC on eth0 [ 2.280294] igb 0000:07:00.0: Intel(R) Gigabit Ethernet Network Connection [ 2.280415] igb 0000:07:00.0: eth0: (PCIe:2.5Gb/s:Width x1) 0c:c4:7a:9f:87:be [ 2.280590] igb 0000:07:00.0: eth0: PBA No: 010C00-000 [ 2.280712] igb 0000:07:00.0: Using MSI-X interrupts. 4 rx queue(s), 4 tx queue(s) [ 2.280947] xen: registering gsi 17 triggering 0 polarity 1 [ 2.280956] Already setup the GSI :17 [ 2.310581] pps pps1: new PPS source ptp1 [ 2.310766] igb 0000:08:00.0: added PHC on eth1 [ 2.310899] igb 0000:08:00.0: Intel(R) Gigabit Ethernet Network Connection [ 2.311019] igb 0000:08:00.0: eth1: (PCIe:2.5Gb/s:Width x1) 0c:c4:7a:9f:87:bf [ 2.311197] igb 0000:08:00.0: eth1: PBA No: 010000-000 [ 2.311313] igb 0000:08:00.0: Using MSI-X interrupts. 4 rx queue(s), 4 tx queue(s) [ 2.311550] xen: registering gsi 16 triggering 0 polarity 1 [ 2.311558] Already setup the GSI :16 [ 2.369616] igb 0000:0b:00.0: added PHC on eth2 [ 2.369754] igb 0000:0b:00.0: Intel(R) Gigabit Ethernet Network Connection [ 2.369875] igb 0000:0b:00.0: eth2: (PCIe:5.0Gb/s:Width x4) 0c:c4:7a:9f:87:c0 [ 2.370078] igb 0000:0b:00.0: eth2: PBA No: 010000-000 [ 2.370193] igb 0000:0b:00.0: Using MSI-X interrupts. 8 rx queue(s), 8 tx queue(s) [ 2.370422] xen: registering gsi 17 triggering 0 polarity 1 [ 2.370431] Already setup the GSI :17 [ 2.428387] igb 0000:0b:00.1: added PHC on eth3 [ 2.428538] igb 0000:0b:00.1: Intel(R) Gigabit Ethernet Network Connection [ 2.428659] igb 0000:0b:00.1: eth3: (PCIe:5.0Gb/s:Width x4) 0c:c4:7a:9f:87:c1 [ 2.428866] igb 0000:0b:00.1: eth3: PBA No: 010000-000 [ 2.428982] igb 0000:0b:00.1: Using MSI-X interrupts. 8 rx queue(s), 8 tx queue(s) [ 2.429240] xen: registering gsi 18 triggering 0 polarity 1 [ 2.429248] Already setup the GSI :18 [ 2.487118] igb 0000:0b:00.2: added PHC on eth4 [ 2.487273] igb 0000:0b:00.2: Intel(R) Gigabit Ethernet Network Connection [ 2.487395] igb 0000:0b:00.2: eth4: (PCIe:5.0Gb/s:Width x4) 0c:c4:7a:9f:87:c2 [ 2.487628] igb 0000:0b:00.2: eth4: PBA No: 010000-000 [ 2.487746] igb 0000:0b:00.2: Using MSI-X interrupts. 8 rx queue(s), 8 tx queue(s) [ 2.487989] xen: registering gsi 19 triggering 0 polarity 1 [ 2.487999] Already setup the GSI :19 [ 2.543437] igb 0000:0b:00.3: added PHC on eth5 [ 2.543590] igb 0000:0b:00.3: Intel(R) Gigabit Ethernet Network Connection [ 2.543711] igb 0000:0b:00.3: eth5: (PCIe:5.0Gb/s:Width x4) 0c:c4:7a:9f:87:c3 [ 2.543913] igb 0000:0b:00.3: eth5: PBA No: 010000-000 [ 2.544028] igb 0000:0b:00.3: Using MSI-X interrupts. 8 rx queue(s), 8 tx queue(s) [ 2.547211] igb 0000:08:00.0 enx0cc47a9f87bf: renamed from eth1 [ 2.561880] igb 0000:0b:00.1 enx0cc47a9f87c1: renamed from eth3 [ 2.572709] igb 0000:07:00.0 enx0cc47a9f87be: renamed from eth0 [ 2.580662] igb 0000:0b:00.0 enx0cc47a9f87c0: renamed from eth2 [ 2.596738] igb 0000:0b:00.2 enx0cc47a9f87c2: renamed from eth4 [ 2.604810] igb 0000:0b:00.3 enx0cc47a9f87c3: renamed from eth5 [ 2.981910] ixgbe 0000:04:00.0: Multiqueue Enabled: Rx Queue count = 8, Tx Queue count = 8 XDP Queue count = 0 [ 3.110357] ixgbe 0000:04:00.0: MAC: 5, PHY: 0, PBA No: 020B00-000 [ 3.110632] ixgbe 0000:04:00.0: 0c:c4:7a:9f:8f:b6 [ 3.403153] ixgbe 0000:04:00.0: Intel(R) 10 Gigabit Network Connection [ 3.403618] ACPI Warning: \_SB.PCI0.BR2C._PRT: Return Package has no elements (empty) (20220331/nsprepkg-94) [ 3.403881] xen: registering gsi 17 triggering 0 polarity 1 [ 3.403892] Already setup the GSI :17 [ 4.144830] ixgbe 0000:04:00.1: Multiqueue Enabled: Rx Queue count = 8, Tx Queue count = 8 XDP Queue count = 0 [ 4.274921] ixgbe 0000:04:00.1: MAC: 5, PHY: 0, PBA No: 020B00-000 [ 4.275146] ixgbe 0000:04:00.1: 0c:c4:7a:9f:8f:b7 [ 4.571372] ixgbe 0000:04:00.1: Intel(R) 10 Gigabit Network Connection [ 4.573923] ixgbe 0000:04:00.0 enx0cc47a9f8fb6: renamed from eth0 [ 4.581966] ixgbe 0000:04:00.1 enx0cc47a9f8fb7: renamed from eth1 [ 4.985065] EXT4-fs (dm-0): mounting ext3 file system using the ext4 subsystem [ 4.993227] EXT4-fs (dm-0): mounted filesystem with ordered data mode. Quota mode: none. [ 8.637661] EXT4-fs (dm-0): re-mounted. Quota mode: none. [ 9.836723] EXT4-fs (sda1): mounting ext3 file system using the ext4 subsystem [ 9.861673] EXT4-fs (sda1): mounted filesystem with ordered data mode. Quota mode: none. [ 9.940214] Adding 1949692k swap on /dev/mapper/debina0--vg-swap_1. Priority:-2 extents:1 across:1949692k [ 11.456785] xenbr0: port 1(enx0cc47a9f87be) entered blocking state [ 11.456951] xenbr0: port 1(enx0cc47a9f87be) entered disabled state [ 11.457127] device enx0cc47a9f87be entered promiscuous mode [ 14.984101] igb 0000:07:00.0 enx0cc47a9f87be: igb: enx0cc47a9f87be NIC Link is Up 1000 Mbps Full Duplex, Flow Control: RX [ 15.093761] IPv6: ADDRCONF(NETDEV_CHANGE): enx0cc47a9f87be: link becomes ready [ 15.094004] xenbr0: port 1(enx0cc47a9f87be) entered blocking state [ 15.094127] xenbr0: port 1(enx0cc47a9f87be) entered forwarding state [ 15.094400] IPv6: ADDRCONF(NETDEV_CHANGE): xenbr0: link becomes ready