[ 0.000000] Linux version 6.1.94+ (osstest@himrod1) (gcc (Debian 12.2.0-14) 12.2.0, GNU ld (GNU Binutils for Debian) 2.40) #1 SMP PREEMPT_DYNAMIC Fri Jun 21 08:29:25 UTC 2024 [ 0.000000] Command line: placeholder root=/dev/mapper/debina0--vg-root ro console=hvc0 [ 0.000000] Released 0 page(s) [ 0.000000] BIOS-provided physical RAM map: [ 0.000000] Xen: [mem 0x0000000000000000-0x0000000000099fff] usable [ 0.000000] Xen: [mem 0x000000000009ac00-0x00000000000fffff] reserved [ 0.000000] Xen: [mem 0x0000000000100000-0x0000000020065fff] usable [ 0.000000] Xen: [mem 0x00000000796ef000-0x00000000798bdfff] reserved [ 0.000000] Xen: [mem 0x00000000799b7000-0x0000000079e5afff] ACPI NVS [ 0.000000] Xen: [mem 0x0000000079e5b000-0x000000007bdb0fff] reserved [ 0.000000] Xen: [mem 0x000000007bdb2000-0x000000007be37fff] reserved [ 0.000000] Xen: [mem 0x0000000080000000-0x000000008fffffff] reserved [ 0.000000] Xen: [mem 0x00000000fbffc000-0x00000000fbffcfff] reserved [ 0.000000] Xen: [mem 0x00000000fec00000-0x00000000fec00fff] reserved [ 0.000000] Xen: [mem 0x00000000fed1c000-0x00000000fed1ffff] reserved [ 0.000000] Xen: [mem 0x00000000fee00000-0x00000000feefffff] reserved [ 0.000000] Xen: [mem 0x00000000ff000000-0x00000000ffffffff] reserved [ 0.000000] NX (Execute Disable) protection: active [ 0.000000] SMBIOS 2.8 present. [ 0.000000] DMI: Supermicro SYS-5018D-FN8T/X10SDV-TP8F, BIOS 1.0b 11/21/2016 [ 0.000000] Hypervisor detected: Xen PV [ 0.000459] tsc: Detected 2199.996 MHz processor [ 0.000902] e820: update [mem 0x00000000-0x00000fff] usable ==> reserved [ 0.000906] e820: remove [mem 0x000a0000-0x000fffff] usable [ 0.000913] last_pfn = 0x20066 max_arch_pfn = 0x400000000 [ 0.000914] Disabled [ 0.000915] x86/PAT: MTRRs disabled, skipping PAT initialization too. [ 0.000919] x86/PAT: Configuration [0-7]: WB WT UC- UC WC WP UC UC [ 0.000958] Kernel/User page tables isolation: disabled on XEN PV. [ 0.027589] RAMDISK: [mem 0x04000000-0x0536afff] [ 0.027597] ACPI: Early table checksum verification disabled [ 0.028196] ACPI: RSDP 0x00000000000F0580 000024 (v02 SUPERM) [ 0.028208] ACPI: XSDT 0x00000000799FF098 0000B4 (v01 SUPERM SMCI--MB 01072009 AMI 00010013) [ 0.028244] ACPI: FACP 0x0000000079A17AC0 00010C (v05 SUPERM SMCI--MB 01072009 AMI 00010013) [ 0.028292] ACPI: DSDT 0x00000000799FF1E8 0188D5 (v02 SUPERM SMCI--MB 01072009 INTL 20091013) [ 0.028308] ACPI: FACS 0x0000000079E59F80 000040 [ 0.028324] ACPI: APIC 0x0000000079A17BD0 0000BC (v03 SUPERM SMCI--MB 01072009 AMI 00010013) [ 0.028340] ACPI: FPDT 0x0000000079A17C90 000044 (v01 SUPERM SMCI--MB 01072009 AMI 00010013) [ 0.028356] ACPI: FIDT 0x0000000079A17CD8 00009C (v01 SUPERM SMCI--MB 01072009 AMI 00010013) [ 0.028372] ACPI: MCFG 0x0000000079A17D78 00003C (v01 SUPERM SMCI--MB 01072009 MSFT 00000097) [ 0.028388] ACPI: UEFI 0x0000000079A17DB8 000042 (v01 00000000 00000000) [ 0.028405] ACPI: DBG2 0x0000000079A17E00 000072 (v00 SUPERM SMCI--MB 00000000 INTL 20091013) [ 0.028421] ACPI: HPET 0x0000000079A17E78 000038 (v01 SUPERM SMCI--MB 00000001 INTL 20091013) [ 0.028437] ACPI: WDDT 0x0000000079A17EB0 000040 (v01 SUPERM SMCI--MB 00000000 INTL 20091013) [ 0.028453] ACPI: SSDT 0x0000000079A17EF0 00ED8B (v01 AMI PmMgt 00000001 INTL 20120913) [ 0.028469] ACPI: SSDT 0x0000000079A26C80 002285 (v02 SUPERM SpsNm 00000002 INTL 20120913) [ 0.028485] ACPI: SSDT 0x0000000079A28F08 000064 (v02 SUPERM SpsNvs 00000002 INTL 20120913) [ 0.028501] ACPI: PRAD 0x0000000079A28F70 000102 (v02 SUPERM SMCI--MB 00000002 INTL 20120913) [ 0.028517] ACPI: RMAD 0x0000000079A29078 0000CC (v01 SUPERM SMCI--MB 00000001 INTL 20091013) [ 0.028533] ACPI: HEST 0x0000000079A29148 0000A8 (v01 SUPERM SMCI--MB 00000001 INTL 00000001) [ 0.028549] ACPI: BERT 0x0000000079A291F0 000030 (v01 SUPERM SMCI--MB 00000001 INTL 00000001) [ 0.028565] ACPI: ERST 0x0000000079A29220 000230 (v01 SUPERM SMCI--MB 00000001 INTL 00000001) [ 0.028581] ACPI: EINJ 0x0000000079A29450 000130 (v01 SUPERM SMCI--MB 00000001 INTL 00000001) [ 0.028590] ACPI: Reserving FACP table memory at [mem 0x79a17ac0-0x79a17bcb] [ 0.028591] ACPI: Reserving DSDT table memory at [mem 0x799ff1e8-0x79a17abc] [ 0.028592] ACPI: Reserving FACS table memory at [mem 0x79e59f80-0x79e59fbf] [ 0.028593] ACPI: Reserving APIC table memory at [mem 0x79a17bd0-0x79a17c8b] [ 0.028594] ACPI: Reserving FPDT table memory at [mem 0x79a17c90-0x79a17cd3] [ 0.028595] ACPI: Reserving FIDT table memory at [mem 0x79a17cd8-0x79a17d73] [ 0.028596] ACPI: Reserving MCFG table memory at [mem 0x79a17d78-0x79a17db3] [ 0.028597] ACPI: Reserving UEFI table memory at [mem 0x79a17db8-0x79a17df9] [ 0.028598] ACPI: Reserving DBG2 table memory at [mem 0x79a17e00-0x79a17e71] [ 0.028599] ACPI: Reserving HPET table memory at [mem 0x79a17e78-0x79a17eaf] [ 0.028600] ACPI: Reserving WDDT table memory at [mem 0x79a17eb0-0x79a17eef] [ 0.028601] ACPI: Reserving SSDT table memory at [mem 0x79a17ef0-0x79a26c7a] [ 0.028602] ACPI: Reserving SSDT table memory at [mem 0x79a26c80-0x79a28f04] [ 0.028603] ACPI: Reserving SSDT table memory at [mem 0x79a28f08-0x79a28f6b] [ 0.028604] ACPI: Reserving PRAD table memory at [mem 0x79a28f70-0x79a29071] [ 0.028605] ACPI: Reserving RMAD table memory at [mem 0x79a29078-0x79a29143] [ 0.028606] ACPI: Reserving HEST table memory at [mem 0x79a29148-0x79a291ef] [ 0.028607] ACPI: Reserving BERT table memory at [mem 0x79a291f0-0x79a2921f] [ 0.028608] ACPI: Reserving ERST table memory at [mem 0x79a29220-0x79a2944f] [ 0.028609] ACPI: Reserving EINJ table memory at [mem 0x79a29450-0x79a2957f] [ 0.028654] Setting APIC routing to Xen PV. [ 0.032604] Zone ranges: [ 0.032605] DMA [mem 0x0000000000001000-0x0000000000ffffff] [ 0.032607] DMA32 [mem 0x0000000001000000-0x0000000020065fff] [ 0.032609] Normal empty [ 0.032610] Movable zone start for each node [ 0.032611] Early memory node ranges [ 0.032612] node 0: [mem 0x0000000000001000-0x0000000000099fff] [ 0.032613] node 0: [mem 0x0000000000100000-0x0000000020065fff] [ 0.032615] Initmem setup node 0 [mem 0x0000000000001000-0x0000000020065fff] [ 0.032620] On node 0, zone DMA: 1 pages in unavailable ranges [ 0.032657] On node 0, zone DMA: 102 pages in unavailable ranges [ 0.034202] On node 0, zone DMA32: 32666 pages in unavailable ranges [ 0.034207] p2m virtual area at (____ptrval____), size is 40000000 [ 0.221697] Remapped 102 page(s) [ 0.223071] ACPI: PM-Timer IO Port: 0x408 [ 0.223123] ACPI: LAPIC_NMI (acpi_id[0x00] high level lint[0x1]) [ 0.223126] ACPI: LAPIC_NMI (acpi_id[0x02] high level lint[0x1]) [ 0.223128] ACPI: LAPIC_NMI (acpi_id[0x04] high level lint[0x1]) [ 0.223129] ACPI: LAPIC_NMI (acpi_id[0x06] high level lint[0x1]) [ 0.223131] ACPI: LAPIC_NMI (acpi_id[0x01] high level lint[0x1]) [ 0.223133] ACPI: LAPIC_NMI (acpi_id[0x03] high level lint[0x1]) [ 0.223134] ACPI: LAPIC_NMI (acpi_id[0x05] high level lint[0x1]) [ 0.223135] ACPI: LAPIC_NMI (acpi_id[0x07] high level lint[0x1]) [ 0.223164] IOAPIC[0]: apic_id 8, version 32, address 0xfec00000, GSI 0-23 [ 0.223177] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl) [ 0.223180] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level) [ 0.223206] ACPI: Using ACPI (MADT) for SMP configuration information [ 0.223211] ACPI: HPET id: 0x8086a701 base: 0xfed00000 [ 0.223281] smpboot: Allowing 8 CPUs, 0 hotplug CPUs [ 0.223296] PM: hibernation: Registered nosave memory: [mem 0x00000000-0x00000fff] [ 0.223298] PM: hibernation: Registered nosave memory: [mem 0x0009a000-0x0009afff] [ 0.223299] PM: hibernation: Registered nosave memory: [mem 0x0009b000-0x000fffff] [ 0.223301] [mem 0x90000000-0xfbffbfff] available for PCI devices [ 0.223305] Booting kernel on Xen [ 0.223306] Xen version: 4.19-unstable (preserve-AD) [ 0.223309] clocksource: refined-jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 1910969940391419 ns [ 0.229566] setup_percpu: NR_CPUS:64 nr_cpumask_bits:8 nr_cpu_ids:8 nr_node_ids:1 [ 0.229850] percpu: Embedded 54 pages/cpu s180520 r8192 d32472 u262144 [ 0.229856] pcpu-alloc: s180520 r8192 d32472 u262144 alloc=1*2097152 [ 0.229859] pcpu-alloc: [0] 0 1 2 3 4 5 6 7 [ 0.229938] xen: PV spinlocks enabled [ 0.229941] PV qspinlock hash table entries: 256 (order: 0, 4096 bytes, linear) [ 0.229946] Built 1 zonelists, mobility grouping on. Total pages: 129006 [ 0.229948] Kernel command line: placeholder root=/dev/mapper/debina0--vg-root ro console=hvc0 [ 0.229985] Unknown kernel command line parameters "placeholder", will be passed to user space. [ 0.229995] random: crng init done [ 0.230044] Dentry cache hash table entries: 65536 (order: 7, 524288 bytes, linear) [ 0.230069] Inode-cache hash table entries: 32768 (order: 6, 262144 bytes, linear) [ 0.231386] mem auto-init: stack:all(zero), heap alloc:off, heap free:off [ 0.231389] software IO TLB: area num 8. [ 0.290917] Memory: 390032K/524284K available (14349K kernel code, 2682K rwdata, 4576K rodata, 1576K init, 1296K bss, 134000K reserved, 0K cma-reserved) [ 0.291085] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=8, Nodes=1 [ 0.293566] Dynamic Preempt: voluntary [ 0.293665] rcu: Preemptible hierarchical RCU implementation. [ 0.293666] rcu: RCU event tracing is enabled. [ 0.293667] rcu: RCU restricting CPUs from NR_CPUS=64 to nr_cpu_ids=8. [ 0.293669] Trampoline variant of Tasks RCU enabled. [ 0.293670] rcu: RCU calculated value of scheduler-enlistment delay is 100 jiffies. [ 0.293671] rcu: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=8 [ 0.304224] NR_IRQS: 4352, nr_irqs: 488, preallocated irqs: 16 [ 0.304349] xen:events: Using FIFO-based ABI [ 0.304373] xen: --> pirq=1 -> irq=1 (gsi=1) [ 0.304381] xen: --> pirq=2 -> irq=2 (gsi=2) [ 0.304389] xen: --> pirq=3 -> irq=3 (gsi=3) [ 0.304396] xen: --> pirq=4 -> irq=4 (gsi=4) [ 0.304403] xen: --> pirq=5 -> irq=5 (gsi=5) [ 0.304411] xen: --> pirq=6 -> irq=6 (gsi=6) [ 0.304418] xen: --> pirq=7 -> irq=7 (gsi=7) [ 0.304425] xen: --> pirq=8 -> irq=8 (gsi=8) [ 0.304432] xen: --> pirq=9 -> irq=9 (gsi=9) [ 0.304440] xen: --> pirq=10 -> irq=10 (gsi=10) [ 0.304447] xen: --> pirq=11 -> irq=11 (gsi=11) [ 0.304454] xen: --> pirq=12 -> irq=12 (gsi=12) [ 0.304462] xen: --> pirq=13 -> irq=13 (gsi=13) [ 0.304471] xen: --> pirq=14 -> irq=14 (gsi=14) [ 0.304478] xen: --> pirq=15 -> irq=15 (gsi=15) [ 0.304488] rcu: srcu_init: Setting srcu_struct sizes based on contention. [ 0.309855] Console: colour VGA+ 80x25 [ 0.324677] printk: console [tty0] enabled [ 0.326011] printk: console [hvc0] enabled [ 0.326150] ACPI: Core revision 20220331 [ 0.341632] clocksource: xen: mask: 0xffffffffffffffff max_cycles: 0x1cd42e4dffb, max_idle_ns: 881590591483 ns [ 0.341798] Xen: using vcpuop timer interface [ 0.341806] installing Xen timer for CPU 0 [ 0.341956] clocksource: tsc-early: mask: 0xffffffffffffffff max_cycles: 0x1fb62f12e8c, max_idle_ns: 440795238402 ns [ 0.342116] Calibrating delay loop (skipped), value calculated using timer frequency.. 4399.99 BogoMIPS (lpj=2199996) [ 0.342446] Last level iTLB entries: 4KB 64, 2MB 8, 4MB 8 [ 0.342564] Last level dTLB entries: 4KB 64, 2MB 0, 4MB 0, 1GB 4 [ 0.342691] Spectre V1 : Mitigation: usercopy/swapgs barriers and __user pointer sanitization [ 0.342841] Spectre V2 : Mitigation: Retpolines [ 0.343123] Spectre V2 : Spectre v2 / SpectreRSB mitigation: Filling RSB on context switch [ 0.343282] Spectre V2 : Spectre v2 / SpectreRSB : Filling RSB on VMEXIT [ 0.343402] Spectre V2 : Enabling Restricted Speculation for firmware calls [ 0.343523] Spectre V2 : mitigation: Enabling conditional Indirect Branch Prediction Barrier [ 0.343672] Spectre V2 : User space: Mitigation: STIBP via prctl [ 0.343791] Speculative Store Bypass: Mitigation: Speculative Store Bypass disabled via prctl [ 0.343943] MDS: Mitigation: Clear CPU buffers [ 0.344057] TAA: Mitigation: Clear CPU buffers [ 0.344120] MMIO Stale Data: Vulnerable: Clear CPU buffers attempted, no microcode [ 0.344287] x86/fpu: Supporting XSAVE feature 0x001: 'x87 floating point registers' [ 0.344435] x86/fpu: Supporting XSAVE feature 0x002: 'SSE registers' [ 0.344583] x86/fpu: Supporting XSAVE feature 0x004: 'AVX registers' [ 0.344702] x86/fpu: xstate_offset[2]: 576, xstate_sizes[2]: 256 [ 0.344822] x86/fpu: Enabled xstate features 0x7, context size is 832 bytes, using 'standard' format. [ 0.362574] Freeing SMP alternatives memory: 40K [ 0.362702] pid_max: default: 32768 minimum: 301 [ 0.363139] LSM: Security Framework initializing [ 0.363262] SELinux: Initializing. [ 0.363407] Mount-cache hash table entries: 1024 (order: 1, 8192 bytes, linear) [ 0.363555] Mountpoint-cache hash table entries: 1024 (order: 1, 8192 bytes, linear) [ 0.364209] cpu 0 spinlock event irq 25 [ 0.364330] VPMU disabled by hypervisor. [ 0.364764] cblist_init_generic: Setting adjustable number of callback queues. [ 0.364911] cblist_init_generic: Setting shift to 3 and lim to 1. [ 0.365068] Performance Events: unsupported p6 CPU model 86 no PMU driver, software events only. [ 0.365122] signal: max sigframe size: 1776 [ 0.365286] rcu: Hierarchical SRCU implementation. [ 0.365409] rcu: Max phase no-delay instances is 400. [ 0.365899] smp: Bringing up secondary CPUs ... [ 0.366236] installing Xen timer for CPU 1 [ 0.366704] cpu 1 spinlock event irq 35 [ 0.367257] MDS CPU bug present and SMT on, data leak possible. See https://www.kernel.org/doc/html/latest/admin-guide/hw-vuln/mds.html for more details. [ 0.367427] TAA CPU bug present and SMT on, data leak possible. See https://www.kernel.org/doc/html/latest/admin-guide/hw-vuln/tsx_async_abort.html for more details. [ 0.367616] MMIO Stale Data CPU bug present and SMT on, data leak possible. See https://www.kernel.org/doc/html/latest/admin-guide/hw-vuln/processor_mmio_stale_data.html for more details. [ 0.368340] installing Xen timer for CPU 2 [ 0.368814] cpu 2 spinlock event irq 41 [ 0.369217] installing Xen timer for CPU 3 [ 0.369649] cpu 3 spinlock event irq 47 [ 0.369649] installing Xen timer for CPU 4 [ 0.370483] cpu 4 spinlock event irq 53 [ 0.370483] installing Xen timer for CPU 5 [ 0.371278] cpu 5 spinlock event irq 59 [ 0.371323] installing Xen timer for CPU 6 [ 0.372160] cpu 6 spinlock event irq 65 [ 0.372370] installing Xen timer for CPU 7 [ 0.372800] cpu 7 spinlock event irq 71 [ 0.373376] smp: Brought up 1 node, 8 CPUs [ 0.373495] smpboot: Max logical packages: 1 [ 0.373712] devtmpfs: initialized [ 0.373712] x86/mm: Memory block size: 128MB [ 0.374350] ACPI: PM: Registering ACPI NVS region [mem 0x799b7000-0x79e5afff] (4866048 bytes) [ 0.374387] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 1911260446275000 ns [ 0.374555] futex hash table entries: 2048 (order: 5, 131072 bytes, linear) [ 0.374806] PM: RTC time: 08:46:42, date: 2024-06-21 [ 0.375375] NET: Registered PF_NETLINK/PF_ROUTE protocol family [ 0.375522] xen:grant_table: Grant tables using version 1 layout [ 0.375660] Grant table initialized [ 0.375967] audit: initializing netlink subsys (disabled) [ 0.376152] audit: type=2000 audit(1718959602.253:1): state=initialized audit_enabled=0 res=1 [ 0.376209] thermal_sys: Registered thermal governor 'step_wise' [ 0.376209] thermal_sys: Registered thermal governor 'user_space' [ 0.376343] ACPI FADT declares the system doesn't support PCIe ASPM, so disable it [ 0.376779] PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0x80000000-0x8fffffff] (base 0x80000000) [ 0.377124] PCI: MMCONFIG at [mem 0x80000000-0x8fffffff] reserved in E820 [ 0.506071] PCI: Using configuration type 1 for base access [ 0.508670] kprobes: kprobe jump-optimization is enabled. All kprobes are optimized if possible. [ 0.509188] ACPI: Added _OSI(Module Device) [ 0.509287] ACPI: Added _OSI(Processor Device) [ 0.509401] ACPI: Added _OSI(3.0 _SCP Extensions) [ 0.509515] ACPI: Added _OSI(Processor Aggregator Device) [ 0.540063] ACPI: 4 ACPI AML tables successfully acquired and loaded [ 0.542004] xen: registering gsi 9 triggering 0 polarity 0 [ 0.544572] ACPI: Dynamic OEM Table Load: [ 0.553931] ACPI: Interpreter enabled [ 0.554065] ACPI: PM: (supports S0 S4 S5) [ 0.554120] ACPI: Using IOAPIC for interrupt routing [ 0.554268] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug [ 0.554419] PCI: Using E820 reservations for host bridge windows [ 0.554992] ACPI: Enabled 6 GPEs in block 00 to 3F [ 0.591361] ACPI: PCI Root Bridge [UNC0] (domain 0000 [bus ff]) [ 0.591685] acpi PNP0A03:03: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI HPX-Type3] [ 0.591963] acpi PNP0A03:03: _OSC: platform does not support [LTR] [ 0.592233] acpi PNP0A03:03: _OSC: OS now controls [PME PCIeCapability] [ 0.592354] acpi PNP0A03:03: FADT indicates ASPM is unsupported, using BIOS configuration [ 0.592731] PCI host bridge to bus 0000:ff [ 0.592845] pci_bus 0000:ff: root bus resource [bus ff] [ 0.593039] pci 0000:ff:0b.0: [8086:6f81] type 00 class 0x088000 [ 0.593449] pci 0000:ff:0b.1: [8086:6f36] type 00 class 0x110100 [ 0.593876] pci 0000:ff:0b.2: [8086:6f37] type 00 class 0x110100 [ 0.594303] pci 0000:ff:0b.3: [8086:6f76] type 00 class 0x088000 [ 0.594783] pci 0000:ff:0c.0: [8086:6fe0] type 00 class 0x088000 [ 0.595210] pci 0000:ff:0c.1: [8086:6fe1] type 00 class 0x088000 [ 0.595633] pci 0000:ff:0c.2: [8086:6fe2] type 00 class 0x088000 [ 0.596095] pci 0000:ff:0c.3: [8086:6fe3] type 00 class 0x088000 [ 0.596635] pci 0000:ff:0f.0: [8086:6ff8] type 00 class 0x088000 [ 0.597072] pci 0000:ff:0f.4: [8086:6ffc] type 00 class 0x088000 [ 0.597537] pci 0000:ff:0f.5: [8086:6ffd] type 00 class 0x088000 [ 0.597960] pci 0000:ff:0f.6: [8086:6ffe] type 00 class 0x088000 [ 0.598387] pci 0000:ff:10.0: [8086:6f1d] type 00 class 0x088000 [ 0.598847] pci 0000:ff:10.1: [8086:6f34] type 00 class 0x110100 [ 0.599475] pci 0000:ff:10.5: [8086:6f1e] type 00 class 0x088000 [ 0.599938] pci 0000:ff:10.6: [8086:6f7d] type 00 class 0x110100 [ 0.599938] pci 0000:ff:10.7: [8086:6f1f] type 00 class 0x088000 [ 0.599970] pci 0000:ff:12.0: [8086:6fa0] type 00 class 0x088000 [ 0.600115] pci 0000:ff:12.1: [8086:6f30] type 00 class 0x110100 [ 0.600115] pci 0000:ff:13.0: [8086:6fa8] type 00 class 0x088000 [ 0.600115] pci 0000:ff:13.1: [8086:6f71] type 00 class 0x088000 [ 0.601507] pci 0000:ff:13.2: [8086:6faa] type 00 class 0x088000 [ 0.601978] pci 0000:ff:13.3: [8086:6fab] type 00 class 0x088000 [ 0.602446] pci 0000:ff:13.4: [8086:6fac] type 00 class 0x088000 [ 0.603169] pci 0000:ff:13.5: [8086:6fad] type 00 class 0x088000 [ 0.603641] pci 0000:ff:13.6: [8086:6fae] type 00 class 0x088000 [ 0.604067] pci 0000:ff:13.7: [8086:6faf] type 00 class 0x088000 [ 0.605449] pci 0000:ff:14.0: [8086:6fb0] type 00 class 0x088000 [ 0.605920] pci 0000:ff:14.1: [8086:6fb1] type 00 class 0x088000 [ 0.605920] pci 0000:ff:14.2: [8086:6fb2] type 00 class 0x088000 [ 0.606106] pci 0000:ff:14.3: [8086:6fb3] type 00 class 0x088000 [ 0.606115] pci 0000:ff:14.4: [8086:6fbc] type 00 class 0x088000 [ 0.607234] pci 0000:ff:14.5: [8086:6fbd] type 00 class 0x088000 [ 0.607660] pci 0000:ff:14.6: [8086:6fbe] type 00 class 0x088000 [ 0.608084] pci 0000:ff:14.7: [8086:6fbf] type 00 class 0x088000 [ 0.609434] pci 0000:ff:15.0: [8086:6fb4] type 00 class 0x088000 [ 0.609902] pci 0000:ff:15.1: [8086:6fb5] type 00 class 0x088000 [ 0.609902] pci 0000:ff:15.2: [8086:6fb6] type 00 class 0x088000 [ 0.609902] pci 0000:ff:15.3: [8086:6fb7] type 00 class 0x088000 [ 0.610115] pci 0000:ff:1e.0: [8086:6f98] type 00 class 0x088000 [ 0.610115] pci 0000:ff:1e.1: [8086:6f99] type 00 class 0x088000 [ 0.612425] pci 0000:ff:1e.2: [8086:6f9a] type 00 class 0x088000 [ 0.612853] pci 0000:ff:1e.3: [8086:6fc0] type 00 class 0x088000 [ 0.613102] pci 0000:ff:1e.4: [8086:6f9c] type 00 class 0x088000 [ 0.613439] pci 0000:ff:1f.0: [8086:6f88] type 00 class 0x088000 [ 0.613867] pci 0000:ff:1f.2: [8086:6f8a] type 00 class 0x088000 [ 0.614294] pci_bus 0000:ff: on NUMA node 0 [ 0.618115] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-fe]) [ 0.618115] acpi PNP0A08:00: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI HPX-Type3] [ 0.618115] acpi PNP0A08:00: _OSC: platform does not support [PME LTR] [ 0.618115] acpi PNP0A08:00: _OSC: OS now controls [PCIeCapability] [ 0.620121] acpi PNP0A08:00: FADT indicates ASPM is unsupported, using BIOS configuration [ 0.620600] PCI host bridge to bus 0000:00 [ 0.620714] pci_bus 0000:00: root bus resource [io 0x0000-0x0cf7 window] [ 0.620836] pci_bus 0000:00: root bus resource [io 0x1000-0xffff window] [ 0.620957] pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff window] [ 0.621103] pci_bus 0000:00: root bus resource [mem 0x90000000-0xfbffbfff window] [ 0.621120] pci_bus 0000:00: root bus resource [bus 00-fe] [ 0.621300] pci 0000:00:00.0: [8086:6f00] type 00 class 0x060000 [ 0.621938] pci 0000:00:01.0: [8086:6f02] type 01 class 0x060400 [ 0.622562] pci 0000:00:01.0: PME# supported from D0 D3hot D3cold [ 0.623111] pci 0000:00:01.1: [8086:6f03] type 01 class 0x060400 [ 0.623671] pci 0000:00:01.1: PME# supported from D0 D3hot D3cold [ 0.624062] pci 0000:00:02.0: [8086:6f04] type 01 class 0x060400 [ 0.624516] pci 0000:00:02.0: PME# supported from D0 D3hot D3cold [ 0.624870] pci 0000:00:02.2: [8086:6f06] type 01 class 0x060400 [ 0.625429] pci 0000:00:02.2: PME# supported from D0 D3hot D3cold [ 0.625805] pci 0000:00:03.0: [8086:6f08] type 01 class 0x060400 [ 0.626378] pci 0000:00:03.0: PME# supported from D0 D3hot D3cold [ 0.626745] pci 0000:00:03.2: [8086:6f0a] type 01 class 0x060400 [ 0.627482] pci 0000:00:03.2: PME# supported from D0 D3hot D3cold [ 0.627908] pci 0000:00:05.0: [8086:6f28] type 00 class 0x088000 [ 0.628516] pci 0000:00:05.1: [8086:6f29] type 00 class 0x088000 [ 0.628516] pci 0000:00:05.2: [8086:6f2a] type 00 class 0x088000 [ 0.629088] pci 0000:00:14.0: [8086:8c31] type 00 class 0x0c0330 [ 0.629115] pci 0000:00:14.0: reg 0x10: [mem 0xfb600000-0xfb60ffff 64bit] [ 0.629115] pci 0000:00:14.0: PME# supported from D3hot D3cold [ 0.630356] pci 0000:00:16.0: [8086:8c3a] type 00 class 0x078000 [ 0.630575] pci 0000:00:16.0: reg 0x10: [mem 0xfb617000-0xfb61700f 64bit] [ 0.631078] pci 0000:00:16.0: PME# supported from D0 D3hot D3cold [ 0.632307] pci 0000:00:16.1: [8086:8c3b] type 00 class 0x078000 [ 0.632526] pci 0000:00:16.1: reg 0x10: [mem 0xfb616000-0xfb61600f 64bit] [ 0.632988] pci 0000:00:16.1: PME# supported from D0 D3hot D3cold [ 0.633357] pci 0000:00:1a.0: [8086:8c2d] type 00 class 0x0c0320 [ 0.633555] pci 0000:00:1a.0: reg 0x10: [mem 0xfb614000-0xfb6143ff] [ 0.634090] pci 0000:00:1a.0: PME# supported from D0 D3hot D3cold [ 0.634316] pci 0000:00:1c.0: [8086:8c10] type 01 class 0x060400 [ 0.635102] pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold [ 0.635201] pci 0000:00:1c.0: Enabling MPC IRBNCE [ 0.635323] pci 0000:00:1c.0: Intel PCH root port ACS workaround enabled [ 0.643333] pci 0000:00:1c.1: [8086:8c12] type 01 class 0x060400 [ 0.643890] pci 0000:00:1c.1: PME# supported from D0 D3hot D3cold [ 0.644086] pci 0000:00:1c.1: Enabling MPC IRBNCE [ 0.644127] pci 0000:00:1c.1: Intel PCH root port ACS workaround enabled [ 0.644421] pci 0000:00:1c.3: [8086:8c16] type 01 class 0x060400 [ 0.645204] pci 0000:00:1c.3: PME# supported from D0 D3hot D3cold [ 0.645401] pci 0000:00:1c.3: Enabling MPC IRBNCE [ 0.645523] pci 0000:00:1c.3: Intel PCH root port ACS workaround enabled [ 0.646038] pci 0000:00:1c.4: [8086:8c18] type 01 class 0x060400 [ 0.646555] pci 0000:00:1c.4: PME# supported from D0 D3hot D3cold [ 0.646750] pci 0000:00:1c.4: Enabling MPC IRBNCE [ 0.646873] pci 0000:00:1c.4: Intel PCH root port ACS workaround enabled [ 0.647198] pci 0000:00:1d.0: [8086:8c26] type 00 class 0x0c0320 [ 0.647435] pci 0000:00:1d.0: reg 0x10: [mem 0xfb613000-0xfb6133ff] [ 0.647970] pci 0000:00:1d.0: PME# supported from D0 D3hot D3cold [ 0.648292] pci 0000:00:1f.0: [8086:8c54] type 00 class 0x060100 [ 0.649084] pci 0000:00:1f.2: [8086:8c02] type 00 class 0x010601 [ 0.649194] pci 0000:00:1f.2: reg 0x10: [io 0xf070-0xf077] [ 0.649353] pci 0000:00:1f.2: reg 0x14: [io 0xf060-0xf063] [ 0.649713] pci 0000:00:1f.2: reg 0x18: [io 0xf050-0xf057] [ 0.649872] pci 0000:00:1f.2: reg 0x1c: [io 0xf040-0xf043] [ 0.650069] pci 0000:00:1f.2: reg 0x20: [io 0xf020-0xf03f] [ 0.650160] pci 0000:00:1f.2: reg 0x24: [mem 0xfb612000-0xfb6127ff] [ 0.650474] pci 0000:00:1f.2: PME# supported from D3hot [ 0.650762] pci 0000:00:1f.3: [8086:8c22] type 00 class 0x0c0500 [ 0.650980] pci 0000:00:1f.3: reg 0x10: [mem 0xfb611000-0xfb6110ff 64bit] [ 0.651267] pci 0000:00:1f.3: reg 0x20: [io 0xf000-0xf01f] [ 0.651646] pci 0000:00:1f.6: [8086:8c24] type 00 class 0x118000 [ 0.651865] pci 0000:00:1f.6: reg 0x10: [mem 0xfb610000-0xfb610fff 64bit] [ 0.652821] pci 0000:00:01.0: PCI bridge to [bus 01] [ 0.653120] pci 0000:00:01.1: PCI bridge to [bus 02] [ 0.653651] pci 0000:03:00.0: [8086:6f50] type 00 class 0x088000 [ 0.653864] pci 0000:03:00.0: reg 0x10: [mem 0xfb506000-0xfb507fff 64bit] [ 0.654663] pci 0000:03:00.1: [8086:6f51] type 00 class 0x088000 [ 0.654876] pci 0000:03:00.1: reg 0x10: [mem 0xfb504000-0xfb505fff 64bit] [ 0.655626] pci 0000:03:00.2: [8086:6f52] type 00 class 0x088000 [ 0.655840] pci 0000:03:00.2: reg 0x10: [mem 0xfb502000-0xfb503fff 64bit] [ 0.656546] pci 0000:03:00.3: [8086:6f53] type 00 class 0x088000 [ 0.656798] pci 0000:03:00.3: reg 0x10: [mem 0xfb500000-0xfb501fff 64bit] [ 0.657718] pci 0000:00:02.0: PCI bridge to [bus 03] [ 0.657859] pci 0000:00:02.0: bridge window [mem 0xfb500000-0xfb5fffff] [ 0.658219] pci 0000:04:00.0: [8086:15ac] type 00 class 0x020000 [ 0.658432] pci 0000:04:00.0: reg 0x10: [mem 0xfbc00000-0xfbdfffff 64bit pref] [ 0.658718] pci 0000:04:00.0: reg 0x20: [mem 0xfbe04000-0xfbe07fff 64bit pref] [ 0.658902] pci 0000:04:00.0: reg 0x30: [mem 0xfb480000-0xfb4fffff pref] [ 0.659254] pci 0000:04:00.0: PME# supported from D0 D3hot D3cold [ 0.659516] pci 0000:04:00.0: reg 0x184: [mem 0x00000000-0x00003fff 64bit] [ 0.659638] pci 0000:04:00.0: VF(n) BAR0 space: [mem 0x00000000-0x000fffff 64bit] (contains BAR0 for 64 VFs) [ 0.659843] pci 0000:04:00.0: reg 0x190: [mem 0x00000000-0x00003fff 64bit] [ 0.659964] pci 0000:04:00.0: VF(n) BAR3 space: [mem 0x00000000-0x000fffff 64bit] (contains BAR3 for 64 VFs) [ 0.660756] pci 0000:04:00.1: [8086:15ac] type 00 class 0x020000 [ 0.661010] pci 0000:04:00.1: reg 0x10: [mem 0xfba00000-0xfbbfffff 64bit pref] [ 0.661261] pci 0000:04:00.1: reg 0x20: [mem 0xfbe00000-0xfbe03fff 64bit pref] [ 0.661640] pci 0000:04:00.1: reg 0x30: [mem 0xfb400000-0xfb47ffff pref] [ 0.661991] pci 0000:04:00.1: PME# supported from D0 D3hot D3cold [ 0.662225] pci 0000:04:00.1: reg 0x184: [mem 0x00000000-0x00003fff 64bit] [ 0.662347] pci 0000:04:00.1: VF(n) BAR0 space: [mem 0x00000000-0x000fffff 64bit] (contains BAR0 for 64 VFs) [ 0.662551] pci 0000:04:00.1: reg 0x190: [mem 0x00000000-0x00003fff 64bit] [ 0.662673] pci 0000:04:00.1: VF(n) BAR3 space: [mem 0x00000000-0x000fffff 64bit] (contains BAR3 for 64 VFs) [ 0.663234] pci 0000:00:02.2: PCI bridge to [bus 04] [ 0.663370] pci 0000:00:02.2: bridge window [mem 0xfb400000-0xfb4fffff] [ 0.663509] pci 0000:00:02.2: bridge window [mem 0xfba00000-0xfbefffff 64bit pref] [ 0.663839] pci 0000:00:03.0: PCI bridge to [bus 05] [ 0.664132] pci 0000:00:03.2: PCI bridge to [bus 06] [ 0.664502] pci 0000:07:00.0: working around ROM BAR overlap defect [ 0.664622] pci 0000:07:00.0: [8086:1533] type 00 class 0x020000 [ 0.664829] pci 0000:07:00.0: reg 0x10: [mem 0xfb300000-0xfb37ffff] [ 0.665085] pci 0000:07:00.0: reg 0x18: [io 0xe000-0xe01f] [ 0.665362] pci 0000:07:00.0: reg 0x1c: [mem 0xfb380000-0xfb383fff] [ 0.665895] pci 0000:07:00.0: PME# supported from D0 D3hot D3cold [ 0.666402] pci 0000:00:1c.0: PCI bridge to [bus 07] [ 0.666528] pci 0000:00:1c.0: bridge window [io 0xe000-0xefff] [ 0.666657] pci 0000:00:1c.0: bridge window [mem 0xfb300000-0xfb3fffff] [ 0.667258] pci 0000:08:00.0: working around ROM BAR overlap defect [ 0.667379] pci 0000:08:00.0: [8086:1533] type 00 class 0x020000 [ 0.667586] pci 0000:08:00.0: reg 0x10: [mem 0xfb200000-0xfb27ffff] [ 0.667803] pci 0000:08:00.0: reg 0x18: [io 0xd000-0xd01f] [ 0.667969] pci 0000:08:00.0: reg 0x1c: [mem 0xfb280000-0xfb283fff] [ 0.667969] pci 0000:08:00.0: PME# supported from D0 D3hot D3cold [ 0.668011] pci 0000:00:1c.1: PCI bridge to [bus 08] [ 0.668115] pci 0000:00:1c.1: bridge window [io 0xd000-0xdfff] [ 0.668115] pci 0000:00:1c.1: bridge window [mem 0xfb200000-0xfb2fffff] [ 0.668115] pci 0000:09:00.0: [1a03:1150] type 01 class 0x060400 [ 0.668115] pci 0000:09:00.0: enabling Extended Tags [ 0.669347] pci 0000:09:00.0: supports D1 D2 [ 0.669462] pci 0000:09:00.0: PME# supported from D0 D1 D2 D3hot D3cold [ 0.669818] pci 0000:00:1c.3: PCI bridge to [bus 09-0a] [ 0.669945] pci 0000:00:1c.3: bridge window [io 0xc000-0xcfff] [ 0.670112] pci 0000:00:1c.3: bridge window [mem 0xfa000000-0xfb0fffff] [ 0.670413] pci_bus 0000:0a: extended config space not accessible [ 0.670585] pci 0000:0a:00.0: [1a03:2000] type 00 class 0x030000 [ 0.670791] pci 0000:0a:00.0: reg 0x10: [mem 0xfa000000-0xfaffffff] [ 0.670959] pci 0000:0a:00.0: reg 0x14: [mem 0xfb000000-0xfb01ffff] [ 0.671127] pci 0000:0a:00.0: reg 0x18: [io 0xc000-0xc07f] [ 0.671520] pci 0000:0a:00.0: Video device with shadowed ROM at [mem 0x000c0000-0x000dffff] [ 0.671811] pci 0000:0a:00.0: supports D1 D2 [ 0.671924] pci 0000:0a:00.0: PME# supported from D0 D1 D2 D3hot D3cold [ 0.672363] pci 0000:09:00.0: PCI bridge to [bus 0a] [ 0.672502] pci 0000:09:00.0: bridge window [io 0xc000-0xcfff] [ 0.672633] pci 0000:09:00.0: bridge window [mem 0xfa000000-0xfb0fffff] [ 0.673058] pci 0000:0b:00.0: [8086:1521] type 00 class 0x020000 [ 0.673200] pci 0000:0b:00.0: reg 0x10: [mem 0xfb160000-0xfb17ffff] [ 0.673410] pci 0000:0b:00.0: reg 0x18: [io 0xb060-0xb07f] [ 0.673572] pci 0000:0b:00.0: reg 0x1c: [mem 0xfb18c000-0xfb18ffff] [ 0.674088] pci 0000:0b:00.0: PME# supported from D0 D3hot D3cold [ 0.674345] pci 0000:0b:00.0: reg 0x184: [mem 0x00000000-0x00003fff 64bit pref] [ 0.674491] pci 0000:0b:00.0: VF(n) BAR0 space: [mem 0x00000000-0x0001ffff 64bit pref] (contains BAR0 for 8 VFs) [ 0.674710] pci 0000:0b:00.0: reg 0x190: [mem 0x00000000-0x00003fff 64bit pref] [ 0.674855] pci 0000:0b:00.0: VF(n) BAR3 space: [mem 0x00000000-0x0001ffff 64bit pref] (contains BAR3 for 8 VFs) [ 0.675419] pci 0000:0b:00.1: [8086:1521] type 00 class 0x020000 [ 0.675660] pci 0000:0b:00.1: reg 0x10: [mem 0xfb140000-0xfb15ffff] [ 0.675869] pci 0000:0b:00.1: reg 0x18: [io 0xb040-0xb05f] [ 0.676033] pci 0000:0b:00.1: reg 0x1c: [mem 0xfb188000-0xfb18bfff] [ 0.676512] pci 0000:0b:00.1: PME# supported from D0 D3hot D3cold [ 0.676742] pci 0000:0b:00.1: reg 0x184: [mem 0x00000000-0x00003fff 64bit pref] [ 0.676924] pci 0000:0b:00.1: VF(n) BAR0 space: [mem 0x00000000-0x0001ffff 64bit pref] (contains BAR0 for 8 VFs) [ 0.677142] pci 0000:0b:00.1: reg 0x190: [mem 0x00000000-0x00003fff 64bit pref] [ 0.677287] pci 0000:0b:00.1: VF(n) BAR3 space: [mem 0x00000000-0x0001ffff 64bit pref] (contains BAR3 for 8 VFs) [ 0.677808] pci 0000:0b:00.2: [8086:1521] type 00 class 0x020000 [ 0.678009] pci 0000:0b:00.2: reg 0x10: [mem 0xfb120000-0xfb13ffff] [ 0.678248] pci 0000:0b:00.2: reg 0x18: [io 0xb020-0xb03f] [ 0.678410] pci 0000:0b:00.2: reg 0x1c: [mem 0xfb184000-0xfb187fff] [ 0.678922] pci 0000:0b:00.2: PME# supported from D0 D3hot D3cold [ 0.679149] pci 0000:0b:00.2: reg 0x184: [mem 0x00000000-0x00003fff 64bit pref] [ 0.679295] pci 0000:0b:00.2: VF(n) BAR0 space: [mem 0x00000000-0x0001ffff 64bit pref] (contains BAR0 for 8 VFs) [ 0.679513] pci 0000:0b:00.2: reg 0x190: [mem 0x00000000-0x00003fff 64bit pref] [ 0.679698] pci 0000:0b:00.2: VF(n) BAR3 space: [mem 0x00000000-0x0001ffff 64bit pref] (contains BAR3 for 8 VFs) [ 0.680199] pci 0000:0b:00.3: [8086:1521] type 00 class 0x020000 [ 0.680401] pci 0000:0b:00.3: reg 0x10: [mem 0xfb100000-0xfb11ffff] [ 0.680611] pci 0000:0b:00.3: reg 0x18: [io 0xb000-0xb01f] [ 0.680773] pci 0000:0b:00.3: reg 0x1c: [mem 0xfb180000-0xfb183fff] [ 0.681323] pci 0000:0b:00.3: PME# supported from D0 D3hot D3cold [ 0.681553] pci 0000:0b:00.3: reg 0x184: [mem 0x00000000-0x00003fff 64bit pref] [ 0.681698] pci 0000:0b:00.3: VF(n) BAR0 space: [mem 0x00000000-0x0001ffff 64bit pref] (contains BAR0 for 8 VFs) [ 0.681916] pci 0000:0b:00.3: reg 0x190: [mem 0x00000000-0x00003fff 64bit pref] [ 0.682062] pci 0000:0b:00.3: VF(n) BAR3 space: [mem 0x00000000-0x0001ffff 64bit pref] (contains BAR3 for 8 VFs) [ 0.682586] pci 0000:00:1c.4: PCI bridge to [bus 0b] [ 0.682713] pci 0000:00:1c.4: bridge window [io 0xb000-0xbfff] [ 0.682842] pci 0000:00:1c.4: bridge window [mem 0xfb100000-0xfb1fffff] [ 0.682982] pci 0000:00:1c.4: bridge has subordinate 0b but max busn 0c [ 0.683452] pci_bus 0000:00: on NUMA node 0 [ 0.683586] xen: registering gsi 13 triggering 1 polarity 0 [ 0.684554] ACPI: PCI: Interrupt link LNKA configured for IRQ 11 [ 0.684750] ACPI: PCI: Interrupt link LNKB configured for IRQ 10 [ 0.684980] ACPI: PCI: Interrupt link LNKC configured for IRQ 5 [ 0.685168] ACPI: PCI: Interrupt link LNKD configured for IRQ 11 [ 0.685360] ACPI: PCI: Interrupt link LNKE configured for IRQ 0 [ 0.685479] ACPI: PCI: Interrupt link LNKE disabled [ 0.685664] ACPI: PCI: Interrupt link LNKF configured for IRQ 0 [ 0.685787] ACPI: PCI: Interrupt link LNKF disabled [ 0.685973] ACPI: PCI: Interrupt link LNKG configured for IRQ 0 [ 0.686092] ACPI: PCI: Interrupt link LNKG disabled [ 0.686191] ACPI: PCI: Interrupt link LNKH configured for IRQ 0 [ 0.686349] ACPI: PCI: Interrupt link LNKH disabled [ 0.686609] xen:balloon: Initialising balloon driver [ 0.687209] iommu: Default domain type: Translated [ 0.695121] iommu: DMA domain TLB invalidation policy: lazy mode [ 0.695306] SCSI subsystem initialized [ 0.695433] libata version 3.00 loaded. [ 0.695433] ACPI: bus type USB registered [ 0.695433] usbcore: registered new interface driver usbfs [ 0.695433] usbcore: registered new interface driver hub [ 0.695533] usbcore: registered new device driver usb [ 0.695661] pps_core: LinuxPPS API ver. 1 registered [ 0.696120] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti [ 0.696272] PTP clock support registered [ 0.696411] Advanced Linux Sound Architecture Driver Initialized. [ 0.696415] NetLabel: Initializing [ 0.696527] NetLabel: domain hash size = 128 [ 0.696640] NetLabel: protocols = UNLABELED CIPSOv4 CALIPSO [ 0.697137] NetLabel: unlabeled traffic allowed by default [ 0.697276] PCI: Using ACPI for IRQ routing [ 0.733604] PCI: pci_cache_line_size set to 64 bytes [ 0.734380] e820: reserve RAM buffer [mem 0x0009a000-0x0009ffff] [ 0.734383] e820: reserve RAM buffer [mem 0x20066000-0x23ffffff] [ 0.734405] pci 0000:0a:00.0: vgaarb: setting as boot VGA device [ 0.734405] pci 0000:0a:00.0: vgaarb: bridge control possible [ 0.734405] pci 0000:0a:00.0: vgaarb: VGA device added: decodes=io+mem,owns=io+mem,locks=none [ 0.734586] vgaarb: loaded [ 0.736167] clocksource: Switched to clocksource tsc-early [ 0.744610] VFS: Disk quotas dquot_6.6.0 [ 0.744746] VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes) [ 0.744892] hugetlbfs: disabling because there are no supported hugepage sizes [ 0.745052] pnp: PnP ACPI init [ 0.745609] xen: registering gsi 8 triggering 1 polarity 0 [ 0.745771] system 00:01: [io 0x0500-0x057f] has been reserved [ 0.745898] system 00:01: [io 0x0400-0x047f] has been reserved [ 0.746017] system 00:01: [io 0x0580-0x059f] has been reserved [ 0.746152] system 00:01: [io 0x0600-0x061f] has been reserved [ 0.746288] system 00:01: [io 0x0880-0x0883] has been reserved [ 0.746409] system 00:01: [io 0x0800-0x081f] has been reserved [ 0.746529] system 00:01: [mem 0xfed1c000-0xfed3ffff] could not be reserved [ 0.746651] system 00:01: [mem 0xfed45000-0xfed8bfff] has been reserved [ 0.746810] system 00:01: [mem 0xff000000-0xffffffff] has been reserved [ 0.746931] system 00:01: [mem 0xfee00000-0xfeefffff] has been reserved [ 0.747052] system 00:01: [mem 0xfed12000-0xfed1200f] has been reserved [ 0.747197] system 00:01: [mem 0xfed12010-0xfed1201f] has been reserved [ 0.747323] system 00:01: [mem 0xfed1b000-0xfed1bfff] has been reserved [ 0.747729] system 00:02: [io 0x0a00-0x0a0f] has been reserved [ 0.747851] system 00:02: [io 0x0a10-0x0a1f] has been reserved [ 0.747970] system 00:02: [io 0x0a20-0x0a2f] has been reserved [ 0.748142] system 00:02: [io 0x0a30-0x0a3f] has been reserved [ 0.748276] system 00:02: [io 0x0a40-0x0a4f] has been reserved [ 0.748694] xen: registering gsi 4 triggering 1 polarity 0 [ 0.748699] Already setup the GSI :4 [ 0.748811] pnp 00:03: [dma 0 disabled] [ 0.749141] xen: registering gsi 3 triggering 1 polarity 0 [ 0.749152] pnp 00:04: [dma 0 disabled] [ 0.749804] pnp: PnP ACPI: found 5 devices [ 0.781192] PM-Timer failed consistency check (0xffffff) - aborting. [ 0.781387] NET: Registered PF_INET protocol family [ 0.781548] IP idents hash table entries: 8192 (order: 4, 65536 bytes, linear) [ 0.781915] tcp_listen_portaddr_hash hash table entries: 256 (order: 0, 4096 bytes, linear) [ 0.782067] Table-perturb hash table entries: 65536 (order: 6, 262144 bytes, linear) [ 0.782268] TCP established hash table entries: 4096 (order: 3, 32768 bytes, linear) [ 0.782448] TCP bind hash table entries: 4096 (order: 5, 131072 bytes, linear) [ 0.782622] TCP: Hash tables configured (established 4096 bind 4096) [ 0.782766] UDP hash table entries: 256 (order: 1, 8192 bytes, linear) [ 0.782907] UDP-Lite hash table entries: 256 (order: 1, 8192 bytes, linear) [ 0.783059] NET: Registered PF_UNIX/PF_LOCAL protocol family [ 0.783433] RPC: Registered named UNIX socket transport module. [ 0.783560] RPC: Registered udp transport module. [ 0.783674] RPC: Registered tcp transport module. [ 0.783788] RPC: Registered tcp NFSv4.1 backchannel transport module. [ 0.784305] pci 0000:00:1c.4: bridge window [mem 0x00100000-0x000fffff 64bit pref] to [bus 0b] add_size 100000 add_align 100000 [ 0.784476] clipped [mem size 0x00000000 64bit pref] to [mem size 0xfffffffffffa0000 64bit pref] for e820 entry [mem 0x0009ac00-0x000fffff] [ 0.784641] clipped [mem size 0x00020000 64bit pref] to [mem size 0xfffffffffffc0000 64bit pref] for e820 entry [mem 0x0009ac00-0x000fffff] [ 0.784803] pci 0000:00:1c.4: BAR 15: assigned [mem 0x90000000-0x900fffff 64bit pref] [ 0.784951] pci 0000:00:01.0: PCI bridge to [bus 01] [ 0.785139] pci 0000:00:01.1: PCI bridge to [bus 02] [ 0.785330] pci 0000:00:02.0: PCI bridge to [bus 03] [ 0.785466] pci 0000:00:02.0: bridge window [mem 0xfb500000-0xfb5fffff] [ 0.785653] pci 0000:04:00.0: BAR 7: no space for [mem size 0x00100000 64bit] [ 0.785777] pci 0000:04:00.0: BAR 7: failed to assign [mem size 0x00100000 64bit] [ 0.785923] pci 0000:04:00.0: BAR 10: no space for [mem size 0x00100000 64bit] [ 0.786067] pci 0000:04:00.0: BAR 10: failed to assign [mem size 0x00100000 64bit] [ 0.786239] pci 0000:04:00.1: BAR 7: no space for [mem size 0x00100000 64bit] [ 0.786364] pci 0000:04:00.1: BAR 7: failed to assign [mem size 0x00100000 64bit] [ 0.786509] pci 0000:04:00.1: BAR 10: no space for [mem size 0x00100000 64bit] [ 0.786654] pci 0000:04:00.1: BAR 10: failed to assign [mem size 0x00100000 64bit] [ 0.786799] pci 0000:04:00.0: BAR 7: no space for [mem size 0x00100000 64bit] [ 0.786954] pci 0000:04:00.0: BAR 7: failed to assign [mem size 0x00100000 64bit] [ 0.787099] pci 0000:04:00.0: BAR 10: no space for [mem size 0x00100000 64bit] [ 0.787263] pci 0000:04:00.0: BAR 10: failed to assign [mem size 0x00100000 64bit] [ 0.787412] pci 0000:04:00.1: BAR 7: no space for [mem size 0x00100000 64bit] [ 0.787534] pci 0000:04:00.1: BAR 7: failed to assign [mem size 0x00100000 64bit] [ 0.787680] pci 0000:04:00.1: BAR 10: no space for [mem size 0x00100000 64bit] [ 0.787824] pci 0000:04:00.1: BAR 10: failed to assign [mem size 0x00100000 64bit] [ 0.787970] pci 0000:00:02.2: PCI bridge to [bus 04] [ 0.788105] pci 0000:00:02.2: bridge window [mem 0xfb400000-0xfb4fffff] [ 0.788260] pci 0000:00:02.2: bridge window [mem 0xfba00000-0xfbefffff 64bit pref] [ 0.788466] pci 0000:00:03.0: PCI bridge to [bus 05] [ 0.788640] pci 0000:00:03.2: PCI bridge to [bus 06] [ 0.788814] pci 0000:00:1c.0: PCI bridge to [bus 07] [ 0.788935] pci 0000:00:1c.0: bridge window [io 0xe000-0xefff] [ 0.789074] pci 0000:00:1c.0: bridge window [mem 0xfb300000-0xfb3fffff] [ 0.789264] pci 0000:00:1c.1: PCI bridge to [bus 08] [ 0.789386] pci 0000:00:1c.1: bridge window [io 0xd000-0xdfff] [ 0.789525] pci 0000:00:1c.1: bridge window [mem 0xfb200000-0xfb2fffff] [ 0.789707] pci 0000:09:00.0: PCI bridge to [bus 0a] [ 0.789837] pci 0000:09:00.0: bridge window [io 0xc000-0xcfff] [ 0.789979] pci 0000:09:00.0: bridge window [mem 0xfa000000-0xfb0fffff] [ 0.790156] pci 0000:00:1c.3: PCI bridge to [bus 09-0a] [ 0.790293] pci 0000:00:1c.3: bridge window [io 0xc000-0xcfff] [ 0.790434] pci 0000:00:1c.3: bridge window [mem 0xfa000000-0xfb0fffff] [ 0.790599] pci 0000:0b:00.0: BAR 7: assigned [mem 0x90000000-0x9001ffff 64bit pref] [ 0.790757] pci 0000:0b:00.0: BAR 10: assigned [mem 0x90020000-0x9003ffff 64bit pref] [ 0.790911] pci 0000:0b:00.1: BAR 7: assigned [mem 0x90040000-0x9005ffff 64bit pref] [ 0.791080] pci 0000:0b:00.1: BAR 10: assigned [mem 0x90060000-0x9007ffff 64bit pref] [ 0.791273] pci 0000:0b:00.2: BAR 7: assigned [mem 0x90080000-0x9009ffff 64bit pref] [ 0.791428] pci 0000:0b:00.2: BAR 10: assigned [mem 0x900a0000-0x900bffff 64bit pref] [ 0.791582] pci 0000:0b:00.3: BAR 7: assigned [mem 0x900c0000-0x900dffff 64bit pref] [ 0.791735] pci 0000:0b:00.3: BAR 10: assigned [mem 0x900e0000-0x900fffff 64bit pref] [ 0.791890] pci 0000:00:1c.4: PCI bridge to [bus 0b] [ 0.792010] pci 0000:00:1c.4: bridge window [io 0xb000-0xbfff] [ 0.792163] pci 0000:00:1c.4: bridge window [mem 0xfb100000-0xfb1fffff] [ 0.792314] pci 0000:00:1c.4: bridge window [mem 0x90000000-0x900fffff 64bit pref] [ 0.792522] pci_bus 0000:00: Some PCI device resources are unassigned, try booting with pci=realloc [ 0.792673] pci_bus 0000:00: resource 4 [io 0x0000-0x0cf7 window] [ 0.792793] pci_bus 0000:00: resource 5 [io 0x1000-0xffff window] [ 0.792912] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff window] [ 0.793033] pci_bus 0000:00: resource 7 [mem 0x90000000-0xfbffbfff window] [ 0.793171] pci_bus 0000:03: resource 1 [mem 0xfb500000-0xfb5fffff] [ 0.793306] pci_bus 0000:04: resource 1 [mem 0xfb400000-0xfb4fffff] [ 0.793426] pci_bus 0000:04: resource 2 [mem 0xfba00000-0xfbefffff 64bit pref] [ 0.793572] pci_bus 0000:07: resource 0 [io 0xe000-0xefff] [ 0.793688] pci_bus 0000:07: resource 1 [mem 0xfb300000-0xfb3fffff] [ 0.793807] pci_bus 0000:08: resource 0 [io 0xd000-0xdfff] [ 0.793957] pci_bus 0000:08: resource 1 [mem 0xfb200000-0xfb2fffff] [ 0.794081] pci_bus 0000:09: resource 0 [io 0xc000-0xcfff] [ 0.794224] pci_bus 0000:09: resource 1 [mem 0xfa000000-0xfb0fffff] [ 0.794345] pci_bus 0000:0a: resource 0 [io 0xc000-0xcfff] [ 0.794462] pci_bus 0000:0a: resource 1 [mem 0xfa000000-0xfb0fffff] [ 0.794582] pci_bus 0000:0b: resource 0 [io 0xb000-0xbfff] [ 0.794698] pci_bus 0000:0b: resource 1 [mem 0xfb100000-0xfb1fffff] [ 0.794817] pci_bus 0000:0b: resource 2 [mem 0x90000000-0x900fffff 64bit pref] [ 0.795401] pci 0000:00:05.0: disabled boot interrupts on device [8086:6f28] [ 0.795620] xen: registering gsi 19 triggering 0 polarity 1 [ 0.795646] xen: --> pirq=19 -> irq=19 (gsi=19) [ 0.804416] xen: registering gsi 18 triggering 0 polarity 1 [ 0.804435] xen: --> pirq=18 -> irq=18 (gsi=18) [ 0.820285] pci 0000:00:1a.0: quirk_usb_early_handoff+0x0/0x720 took 15549 usecs [ 0.820526] xen: registering gsi 18 triggering 0 polarity 1 [ 0.820531] Already setup the GSI :18 [ 0.835450] pci 0000:00:1d.0: quirk_usb_early_handoff+0x0/0x720 took 14627 usecs [ 0.835665] pci 0000:04:00.0: CLS mismatch (64 != 32), using 64 bytes [ 0.835806] PCI-DMA: Using software bounce buffering for IO (SWIOTLB) [ 0.835881] Unpacking initramfs... [ 0.835926] software IO TLB: mapped [mem 0x000000001b180000-0x000000001f180000] (64MB) [ 0.836284] kvm: no hardware support for 'kvm_intel' [ 0.844131] has_svm: not amd or hygon [ 0.844259] kvm: no hardware support for 'kvm_amd' [ 0.844384] clocksource: tsc: mask: 0xffffffffffffffff max_cycles: 0x1fb62f12e8c, max_idle_ns: 440795238402 ns [ 0.844889] clocksource: Switched to clocksource tsc [ 0.847245] Initialise system trusted keyrings [ 0.847570] workingset: timestamp_bits=62 max_order=17 bucket_order=0 [ 0.849104] NFS: Registering the id_resolver key type [ 0.849229] Key type id_resolver registered [ 0.849341] Key type id_legacy registered [ 0.849561] 9p: Installing v9fs 9p2000 file system support [ 0.864476] Key type asymmetric registered [ 0.864603] Asymmetric key parser 'x509' registered [ 0.864752] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 251) [ 0.864908] io scheduler mq-deadline registered [ 0.865023] io scheduler kyber registered [ 0.865899] xen: registering gsi 16 triggering 0 polarity 1 [ 0.865929] xen: --> pirq=16 -> irq=16 (gsi=16) [ 0.866461] xen: registering gsi 16 triggering 0 polarity 1 [ 0.866467] Already setup the GSI :16 [ 0.867135] xen: registering gsi 16 triggering 0 polarity 1 [ 0.867141] Already setup the GSI :16 [ 0.867464] xen: registering gsi 16 triggering 0 polarity 1 [ 0.867468] Already setup the GSI :16 [ 0.867803] xen: registering gsi 16 triggering 0 polarity 1 [ 0.867807] Already setup the GSI :16 [ 0.868449] xen: registering gsi 16 triggering 0 polarity 1 [ 0.868454] Already setup the GSI :16 [ 0.869063] xen: registering gsi 16 triggering 0 polarity 1 [ 0.869068] Already setup the GSI :16 [ 0.869547] xen: registering gsi 17 triggering 0 polarity 1 [ 0.869563] xen: --> pirq=17 -> irq=17 (gsi=17) [ 0.869909] xen: registering gsi 19 triggering 0 polarity 1 [ 0.869914] Already setup the GSI :19 [ 0.870351] xen: registering gsi 16 triggering 0 polarity 1 [ 0.870356] Already setup the GSI :16 [ 0.871066] input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input0 [ 0.871242] ACPI: button: Power Button [PWRB] [ 0.871384] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input1 [ 0.871660] ACPI: button: Power Button [PWRF] [ 0.871921] Monitor-Mwait will be used to enter C-1 state [ 0.871956] Monitor-Mwait will be used to enter C-2 state [ 0.871972] ACPI: \_SB_.SCK0.CP00: Found 2 idle states [ 0.872338] ACPI: \_SB_.SCK0.CP01: Found 2 idle states [ 0.872711] ACPI: \_SB_.SCK0.CP02: Found 2 idle states [ 0.873131] ACPI: \_SB_.SCK0.CP03: Found 2 idle states [ 0.873815] ACPI: \_SB_.SCK0.CP04: Found 2 idle states [ 0.874177] ACPI: \_SB_.SCK0.CP05: Found 2 idle states [ 0.874642] ACPI: \_SB_.SCK0.CP06: Found 2 idle states [ 0.875136] ACPI: \_SB_.SCK0.CP07: Found 2 idle states [ 0.875886] xen:xen_evtchn: Event-channel device installed [ 0.876078] xen_pciback: backend is vpci [ 0.876882] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled [ 0.877193] 00:04: ttyS1 at I/O 0x2f8 (irq = 3, base_baud = 115200) is a 16550A [ 0.877931] hpet_acpi_add: no address or irqs in _CRS [ 0.878164] Non-volatile memory driver v1.3 [ 0.878279] AMD-Vi: AMD IOMMUv2 functionality not available on this system - This is not a bug. [ 0.880945] loop: module loaded [ 0.887747] ahci 0000:00:1f.2: version 3.0 [ 0.887849] xen: registering gsi 16 triggering 0 polarity 1 [ 0.887858] Already setup the GSI :16 [ 0.888183] ahci 0000:00:1f.2: AHCI 0001.0300 32 slots 6 ports 6 Gbps 0x3f impl SATA mode [ 0.888335] ahci 0000:00:1f.2: flags: 64bit ncq led clo pio ems apst [ 0.904280] scsi host0: ahci [ 0.904693] scsi host1: ahci [ 0.905012] scsi host2: ahci [ 0.905410] scsi host3: ahci [ 0.905793] scsi host4: ahci [ 0.906119] scsi host5: ahci [ 0.906265] ata1: SATA max UDMA/133 abar m2048@0xfb612000 port 0xfb612100 irq 75 [ 0.906413] ata2: SATA max UDMA/133 abar m2048@0xfb612000 port 0xfb612180 irq 75 [ 0.906558] ata3: SATA max UDMA/133 abar m2048@0xfb612000 port 0xfb612200 irq 75 [ 0.906721] ata4: SATA max UDMA/133 abar m2048@0xfb612000 port 0xfb612280 irq 75 [ 0.906875] ata5: SATA max UDMA/133 abar m2048@0xfb612000 port 0xfb612300 irq 75 [ 0.907019] ata6: SATA max UDMA/133 abar m2048@0xfb612000 port 0xfb612380 irq 75 [ 0.907451] tun: Universal TUN/TAP device driver, 1.6 [ 0.907720] e100: Intel(R) PRO/100 Network Driver [ 0.907840] e100: Copyright(c) 1999-2006 Intel Corporation [ 0.907979] sky2: driver version 1.30 [ 0.908169] xen_netfront: Initialising Xen virtual ethernet driver [ 0.908547] xen: registering gsi 18 triggering 0 polarity 1 [ 0.908556] Already setup the GSI :18 [ 0.908777] ehci-pci 0000:00:1a.0: EHCI Host Controller [ 0.909016] ehci-pci 0000:00:1a.0: new USB bus registered, assigned bus number 1 [ 0.909204] ehci-pci 0000:00:1a.0: debug port 2 [ 0.913342] ehci-pci 0000:00:1a.0: irq 18, io mem 0xfb614000 [ 0.919680] ehci-pci 0000:00:1a.0: USB 2.0 started, EHCI 1.00 [ 0.919904] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 6.01 [ 0.920053] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 0.920198] usb usb1: Product: EHCI Host Controller [ 0.920313] usb usb1: Manufacturer: Linux 6.1.94+ ehci_hcd [ 0.920430] usb usb1: SerialNumber: 0000:00:1a.0 [ 0.920728] hub 1-0:1.0: USB hub found [ 0.920854] hub 1-0:1.0: 2 ports detected [ 0.921220] xen: registering gsi 18 triggering 0 polarity 1 [ 0.921229] Already setup the GSI :18 [ 0.921422] ehci-pci 0000:00:1d.0: EHCI Host Controller [ 0.921632] ehci-pci 0000:00:1d.0: new USB bus registered, assigned bus number 2 [ 0.921824] ehci-pci 0000:00:1d.0: debug port 2 [ 0.925932] ehci-pci 0000:00:1d.0: irq 18, io mem 0xfb613000 [ 0.932684] ehci-pci 0000:00:1d.0: USB 2.0 started, EHCI 1.00 [ 0.932905] usb usb2: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 6.01 [ 0.933086] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 0.933231] usb usb2: Product: EHCI Host Controller [ 0.933346] usb usb2: Manufacturer: Linux 6.1.94+ ehci_hcd [ 0.933463] usb usb2: SerialNumber: 0000:00:1d.0 [ 0.933767] hub 2-0:1.0: USB hub found [ 0.933893] hub 2-0:1.0: 2 ports detected [ 0.934321] xen: registering gsi 19 triggering 0 polarity 1 [ 0.934330] Already setup the GSI :19 [ 0.934568] xhci_hcd 0000:00:14.0: xHCI Host Controller [ 0.934775] xhci_hcd 0000:00:14.0: new USB bus registered, assigned bus number 3 [ 0.935991] xhci_hcd 0000:00:14.0: hcc params 0x200077c1 hci version 0x100 quirks 0x0000000000009810 [ 0.936454] xhci_hcd 0000:00:14.0: xHCI Host Controller [ 0.936684] xhci_hcd 0000:00:14.0: new USB bus registered, assigned bus number 4 [ 0.936833] xhci_hcd 0000:00:14.0: Host supports USB 3.0 SuperSpeed [ 0.937038] usb usb3: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 6.01 [ 0.937187] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 0.937371] usb usb3: Product: xHCI Host Controller [ 0.937486] usb usb3: Manufacturer: Linux 6.1.94+ xhci-hcd [ 0.937602] usb usb3: SerialNumber: 0000:00:14.0 [ 0.937895] hub 3-0:1.0: USB hub found [ 0.938028] hub 3-0:1.0: 8 ports detected [ 0.939299] usb usb4: New USB device found, idVendor=1d6b, idProduct=0003, bcdDevice= 6.01 [ 0.939461] usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 0.939608] usb usb4: Product: xHCI Host Controller [ 0.939744] usb usb4: Manufacturer: Linux 6.1.94+ xhci-hcd [ 0.939865] usb usb4: SerialNumber: 0000:00:14.0 [ 0.940249] hub 4-0:1.0: USB hub found [ 0.940387] hub 4-0:1.0: 6 ports detected [ 0.940916] Freeing initrd memory: 19884K [ 0.941582] usbcore: registered new interface driver usblp [ 0.941816] usbcore: registered new interface driver usb-storage [ 0.941972] i8042: PNP: No PS/2 controller found. [ 0.942334] rtc_cmos 00:00: RTC can wake from S4 [ 0.942987] rtc_cmos 00:00: registered as rtc0 [ 0.943145] rtc_cmos 00:00: alarms up to one month, y3k, 114 bytes nvram [ 0.943348] device-mapper: uevent: version 1.0.3 [ 0.943440] xen: registering gsi 18 triggering 0 polarity 1 [ 0.943471] Already setup the GSI :18 [ 0.943559] device-mapper: ioctl: 4.47.0-ioctl (2022-07-28) initialised: dm-devel@redhat.com [ 0.943616] i801_smbus 0000:00:1f.3: SPD Write Disable is set [ 0.943748] intel_pstate: CPU model not supported [ 0.943778] i801_smbus 0000:00:1f.3: SMBus using PCI interrupt [ 0.943880] hid: raw HID events driver (C) Jiri Kosina [ 0.944348] usbcore: registered new interface driver usbhid [ 0.944395] i2c i2c-0: 1/4 memory slots populated (from DMI) [ 0.944467] usbhid: USB HID core driver [ 0.944896] Initializing XFRM netlink socket [ 0.945120] NET: Registered PF_INET6 protocol family [ 0.945742] Segment Routing with IPv6 [ 0.945862] In-situ OAM (IOAM) with IPv6 [ 0.946005] sit: IPv6, IPv4 and MPLS over IPv4 tunneling driver [ 0.946247] NET: Registered PF_PACKET protocol family [ 0.946402] 9pnet: Installing 9P2000 support [ 0.946529] Key type dns_resolver registered [ 0.947232] IPI shorthand broadcast: enabled [ 0.947371] sched_clock: Marking stable (909563481, 37623966)->(1795987664, -848800217) [ 0.947969] registered taskstats version 1 [ 0.948086] Loading compiled-in X.509 certificates [ 0.950952] PM: Magic number: 12:660:776 [ 0.951156] acpi LNXCPU:93: hash matches [ 0.951297] printk: console [netcon0] enabled [ 0.951411] netconsole: network logging started [ 0.951783] cfg80211: Loading compiled-in X.509 certificates for regulatory database [ 0.964045] cfg80211: Loaded X.509 cert 'sforshee: 00b28ddf47aef9cea7' [ 0.964388] cfg80211: Loaded X.509 cert 'wens: 61c038651aabdcf94bd0ac7ff06c7248db18c600' [ 0.964831] ALSA device list: [ 0.964998] No soundcards found. [ 0.965069] cfg80211: loaded regulatory.db is malformed or signature is missing/invalid [ 1.159747] usb 1-1: new high-speed USB device number 2 using ehci-pci [ 1.175785] usb 2-1: new high-speed USB device number 2 using ehci-pci [ 1.175987] usb 3-3: new high-speed USB device number 2 using xhci_hcd [ 1.212338] ata2: SATA link down (SStatus 0 SControl 300) [ 1.212650] ata1: SATA link down (SStatus 0 SControl 300) [ 1.220670] ata3: SATA link up 6.0 Gbps (SStatus 133 SControl 300) [ 1.220925] ata4: SATA link down (SStatus 0 SControl 300) [ 1.221063] ata5: SATA link down (SStatus 0 SControl 300) [ 1.221197] ata6: SATA link down (SStatus 0 SControl 300) [ 1.221952] ata3.00: ATA-10: HGST HUS722T1TALA604, RAGNWA05, max UDMA/133 [ 1.288280] usb 1-1: New USB device found, idVendor=8087, idProduct=8008, bcdDevice= 0.05 [ 1.288435] usb 1-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0 [ 1.288815] hub 1-1:1.0: USB hub found [ 1.289027] hub 1-1:1.0: 4 ports detected [ 1.303255] usb 3-3: New USB device found, idVendor=05e3, idProduct=0610, bcdDevice=32.98 [ 1.303412] usb 3-3: New USB device strings: Mfr=0, Product=1, SerialNumber=0 [ 1.303536] usb 3-3: Product: USB2.0 Hub [ 1.304155] usb 2-1: New USB device found, idVendor=8087, idProduct=8000, bcdDevice= 0.05 [ 1.304307] usb 2-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0 [ 1.304560] hub 3-3:1.0: USB hub found [ 1.304722] hub 2-1:1.0: USB hub found [ 1.304920] hub 2-1:1.0: 4 ports detected [ 1.305182] hub 3-3:1.0: 4 ports detected [ 1.309140] ata3.00: 1953525168 sectors, multi 16: LBA48 NCQ (depth 32), AA [ 1.309368] ata3.00: Features: NCQ-sndrcv NCQ-prio [ 1.337010] ata3.00: configured for UDMA/133 [ 1.337325] scsi 2:0:0:0: Direct-Access ATA HGST HUS722T1TAL WA05 PQ: 0 ANSI: 5 [ 1.338208] sd 2:0:0:0: Attached scsi generic sg0 type 0 [ 1.338290] sd 2:0:0:0: [sda] 1953525168 512-byte logical blocks: (1.00 TB/932 GiB) [ 1.338513] sd 2:0:0:0: [sda] Write Protect is off [ 1.338659] sd 2:0:0:0: [sda] Mode Sense: 00 3a 00 00 [ 1.338721] sd 2:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 1.338950] sd 2:0:0:0: [sda] Preferred minimum I/O size 512 bytes [ 1.358274] sda: sda1 sda2 < sda5 > [ 1.358795] sd 2:0:0:0: [sda] Attached SCSI disk [ 1.359982] Freeing unused kernel image (initmem) memory: 1576K [ 1.360110] Write protecting the kernel read-only data: 22528k [ 1.378583] Freeing unused kernel image (text/rodata gap) memory: 2032K [ 1.379924] Freeing unused kernel image (rodata/data gap) memory: 1568K [ 1.421671] usb 3-4: new high-speed USB device number 3 using xhci_hcd [ 1.547942] usb 3-4: New USB device found, idVendor=0557, idProduct=7000, bcdDevice= 0.00 [ 1.548102] usb 3-4: New USB device strings: Mfr=0, Product=0, SerialNumber=0 [ 1.548754] hub 3-4:1.0: USB hub found [ 1.548962] hub 3-4:1.0: 4 ports detected [ 1.611689] usb 3-3.2: new high-speed USB device number 4 using xhci_hcd [ 1.689047] usb 3-3.2: New USB device found, idVendor=05e3, idProduct=0610, bcdDevice=32.98 [ 1.689203] usb 3-3.2: New USB device strings: Mfr=0, Product=1, SerialNumber=0 [ 1.689349] usb 3-3.2: Product: USB2.0 Hub [ 1.690012] hub 3-3.2:1.0: USB hub found [ 1.690442] hub 3-3.2:1.0: 4 ports detected [ 1.841668] usb 3-4.1: new low-speed USB device number 5 using xhci_hcd [ 1.853904] x86/mm: Checked W+X mappings: passed, no W+X pages found. [ 1.854032] Run /init as init process [ 1.854143] with arguments: [ 1.854144] /init [ 1.854145] placeholder [ 1.854146] with environment: [ 1.854147] HOME=/ [ 1.854148] TERM=linux [ 1.946084] usb 3-4.1: New USB device found, idVendor=0557, idProduct=2419, bcdDevice= 1.00 [ 1.946245] usb 3-4.1: New USB device strings: Mfr=0, Product=0, SerialNumber=0 [ 1.952063] input: HID 0557:2419 as /devices/pci0000:00/0000:00:14.0/usb3/3-4/3-4.1/3-4.1:1.0/0003:0557:2419.0001/input/input2 [ 2.004964] hid-generic 0003:0557:2419.0001: input,hidraw0: USB HID v1.00 Keyboard [HID 0557:2419] on usb-0000:00:14.0-4.1/input0 [ 2.007953] input: HID 0557:2419 as /devices/pci0000:00/0000:00:14.0/usb3/3-4/3-4.1/3-4.1:1.1/0003:0557:2419.0002/input/input3 [ 2.008275] hid-generic 0003:0557:2419.0002: input,hidraw1: USB HID v1.00 Mouse [HID 0557:2419] on usb-0000:00:14.0-4.1/input1 [ 2.295960] ixgbe: Intel(R) 10 Gigabit PCI Express Network Driver [ 2.296120] ixgbe: Copyright (c) 1999-2016 Intel Corporation. [ 2.296584] ACPI Warning: \_SB.PCI0.BR2C._PRT: Return Package has no elements (empty) (20220331/nsprepkg-94) [ 2.296941] xen: registering gsi 16 triggering 0 polarity 1 [ 2.296957] Already setup the GSI :16 [ 2.300226] igb: Intel(R) Gigabit Ethernet Network Driver [ 2.300362] igb: Copyright (c) 2007-2014 Intel Corporation. [ 2.300589] xen: registering gsi 16 triggering 0 polarity 1 [ 2.300598] Already setup the GSI :16 [ 2.327935] pps pps0: new PPS source ptp0 [ 2.328132] igb 0000:07:00.0: added PHC on eth0 [ 2.328266] igb 0000:07:00.0: Intel(R) Gigabit Ethernet Network Connection [ 2.328387] igb 0000:07:00.0: eth0: (PCIe:2.5Gb/s:Width x1) 0c:c4:7a:9f:87:be [ 2.328554] igb 0000:07:00.0: eth0: PBA No: 010C00-000 [ 2.328695] igb 0000:07:00.0: Using MSI-X interrupts. 4 rx queue(s), 4 tx queue(s) [ 2.328932] xen: registering gsi 17 triggering 0 polarity 1 [ 2.328941] Already setup the GSI :17 [ 2.358509] pps pps1: new PPS source ptp1 [ 2.358706] igb 0000:08:00.0: added PHC on eth1 [ 2.358840] igb 0000:08:00.0: Intel(R) Gigabit Ethernet Network Connection [ 2.358962] igb 0000:08:00.0: eth1: (PCIe:2.5Gb/s:Width x1) 0c:c4:7a:9f:87:bf [ 2.359127] igb 0000:08:00.0: eth1: PBA No: 010000-000 [ 2.359244] igb 0000:08:00.0: Using MSI-X interrupts. 4 rx queue(s), 4 tx queue(s) [ 2.359467] xen: registering gsi 16 triggering 0 polarity 1 [ 2.359474] Already setup the GSI :16 [ 2.416812] igb 0000:0b:00.0: added PHC on eth2 [ 2.416951] igb 0000:0b:00.0: Intel(R) Gigabit Ethernet Network Connection [ 2.417073] igb 0000:0b:00.0: eth2: (PCIe:5.0Gb/s:Width x4) 0c:c4:7a:9f:87:c0 [ 2.417276] igb 0000:0b:00.0: eth2: PBA No: 010000-000 [ 2.417392] igb 0000:0b:00.0: Using MSI-X interrupts. 8 rx queue(s), 8 tx queue(s) [ 2.417616] xen: registering gsi 17 triggering 0 polarity 1 [ 2.417638] Already setup the GSI :17 [ 2.475660] igb 0000:0b:00.1: added PHC on eth3 [ 2.475798] igb 0000:0b:00.1: Intel(R) Gigabit Ethernet Network Connection [ 2.475920] igb 0000:0b:00.1: eth3: (PCIe:5.0Gb/s:Width x4) 0c:c4:7a:9f:87:c1 [ 2.476139] igb 0000:0b:00.1: eth3: PBA No: 010000-000 [ 2.476256] igb 0000:0b:00.1: Using MSI-X interrupts. 8 rx queue(s), 8 tx queue(s) [ 2.476483] xen: registering gsi 18 triggering 0 polarity 1 [ 2.476490] Already setup the GSI :18 [ 2.534363] igb 0000:0b:00.2: added PHC on eth4 [ 2.534507] igb 0000:0b:00.2: Intel(R) Gigabit Ethernet Network Connection [ 2.534663] igb 0000:0b:00.2: eth4: (PCIe:5.0Gb/s:Width x4) 0c:c4:7a:9f:87:c2 [ 2.534884] igb 0000:0b:00.2: eth4: PBA No: 010000-000 [ 2.535001] igb 0000:0b:00.2: Using MSI-X interrupts. 8 rx queue(s), 8 tx queue(s) [ 2.535248] xen: registering gsi 19 triggering 0 polarity 1 [ 2.535257] Already setup the GSI :19 [ 2.593445] igb 0000:0b:00.3: added PHC on eth5 [ 2.593586] igb 0000:0b:00.3: Intel(R) Gigabit Ethernet Network Connection [ 2.593724] igb 0000:0b:00.3: eth5: (PCIe:5.0Gb/s:Width x4) 0c:c4:7a:9f:87:c3 [ 2.593929] igb 0000:0b:00.3: eth5: PBA No: 010000-000 [ 2.594045] igb 0000:0b:00.3: Using MSI-X interrupts. 8 rx queue(s), 8 tx queue(s) [ 2.597336] igb 0000:07:00.0 enx0cc47a9f87be: renamed from eth0 [ 2.606023] igb 0000:0b:00.1 enx0cc47a9f87c1: renamed from eth3 [ 2.617061] igb 0000:08:00.0 enx0cc47a9f87bf: renamed from eth1 [ 2.630786] igb 0000:0b:00.2 enx0cc47a9f87c2: renamed from eth4 [ 2.638819] igb 0000:0b:00.0 enx0cc47a9f87c0: renamed from eth2 [ 2.650887] igb 0000:0b:00.3 enx0cc47a9f87c3: renamed from eth5 [ 3.030026] ixgbe 0000:04:00.0: Multiqueue Enabled: Rx Queue count = 8, Tx Queue count = 8 XDP Queue count = 0 [ 3.158727] ixgbe 0000:04:00.0: MAC: 5, PHY: 0, PBA No: 020B00-000 [ 3.158854] ixgbe 0000:04:00.0: 0c:c4:7a:9f:8f:b6 [ 3.451273] ixgbe 0000:04:00.0: Intel(R) 10 Gigabit Network Connection [ 3.451585] ACPI Warning: \_SB.PCI0.BR2C._PRT: Return Package has no elements (empty) (20220331/nsprepkg-94) [ 3.451845] xen: registering gsi 17 triggering 0 polarity 1 [ 3.451856] Already setup the GSI :17 [ 4.190173] ixgbe 0000:04:00.1: Multiqueue Enabled: Rx Queue count = 8, Tx Queue count = 8 XDP Queue count = 0 [ 4.320009] ixgbe 0000:04:00.1: MAC: 5, PHY: 0, PBA No: 020B00-000 [ 4.320280] ixgbe 0000:04:00.1: 0c:c4:7a:9f:8f:b7 [ 4.611559] ixgbe 0000:04:00.1: Intel(R) 10 Gigabit Network Connection [ 4.614056] ixgbe 0000:04:00.0 enx0cc47a9f8fb6: renamed from eth0 [ 4.622052] ixgbe 0000:04:00.1 enx0cc47a9f8fb7: renamed from eth1 [ 5.035532] EXT4-fs (dm-0): mounting ext3 file system using the ext4 subsystem [ 5.042926] EXT4-fs (dm-0): mounted filesystem with ordered data mode. Quota mode: none. [ 8.603647] EXT4-fs (dm-0): re-mounted. Quota mode: none. [ 9.732876] EXT4-fs (sda1): mounting ext3 file system using the ext4 subsystem [ 9.753475] EXT4-fs (sda1): mounted filesystem with ordered data mode. Quota mode: none. [ 9.857108] Adding 1949692k swap on /dev/mapper/debina0--vg-swap_1. Priority:-2 extents:1 across:1949692k [ 11.405141] xenbr0: port 1(enx0cc47a9f87be) entered blocking state [ 11.405308] xenbr0: port 1(enx0cc47a9f87be) entered disabled state [ 11.405486] device enx0cc47a9f87be entered promiscuous mode [ 14.916265] igb 0000:07:00.0 enx0cc47a9f87be: igb: enx0cc47a9f87be NIC Link is Up 1000 Mbps Full Duplex, Flow Control: RX [ 15.126032] IPv6: ADDRCONF(NETDEV_CHANGE): enx0cc47a9f87be: link becomes ready [ 15.126262] xenbr0: port 1(enx0cc47a9f87be) entered blocking state [ 15.126387] xenbr0: port 1(enx0cc47a9f87be) entered forwarding state [ 15.126678] IPv6: ADDRCONF(NETDEV_CHANGE): xenbr0: link becomes ready