[ 0.000000] Linux version 6.1.95+ (osstest@himrod1) (gcc (Debian 12.2.0-14) 12.2.0, GNU ld (GNU Binutils for Debian) 2.40) #1 SMP PREEMPT_DYNAMIC Sat Jun 22 04:45:37 UTC 2024 [ 0.000000] Command line: placeholder root=/dev/mapper/godello0--vg-root ro console=hvc0 [ 0.000000] Released 0 page(s) [ 0.000000] BIOS-provided physical RAM map: [ 0.000000] Xen: [mem 0x0000000000000000-0x000000000009efff] usable [ 0.000000] Xen: [mem 0x000000000009f000-0x00000000000fffff] reserved [ 0.000000] Xen: [mem 0x0000000000100000-0x0000000020060fff] usable [ 0.000000] Xen: [mem 0x000000009573f000-0x0000000095bbefff] reserved [ 0.000000] Xen: [mem 0x0000000095bbf000-0x0000000095fbefff] ACPI NVS [ 0.000000] Xen: [mem 0x0000000095fbf000-0x0000000095ffefff] ACPI data [ 0.000000] Xen: [mem 0x0000000096000000-0x000000009fffffff] reserved [ 0.000000] Xen: [mem 0x00000000f0000000-0x00000000f7ffffff] reserved [ 0.000000] Xen: [mem 0x00000000feb00000-0x00000000feb03fff] reserved [ 0.000000] Xen: [mem 0x00000000fec00000-0x00000000fec00fff] reserved [ 0.000000] Xen: [mem 0x00000000fed10000-0x00000000fed19fff] reserved [ 0.000000] Xen: [mem 0x00000000fed1c000-0x00000000fed1ffff] reserved [ 0.000000] Xen: [mem 0x00000000fed90000-0x00000000fed90fff] reserved [ 0.000000] Xen: [mem 0x00000000fee00000-0x00000000feefffff] reserved [ 0.000000] Xen: [mem 0x00000000ffa00000-0x00000000ffffffff] reserved [ 0.000000] NX (Execute Disable) protection: active [ 0.000000] SMBIOS 2.7 present. [ 0.000000] DMI: Dell Inc. PowerEdge R220/081N4V, BIOS 1.1.4 05/06/2014 [ 0.000000] Hypervisor detected: Xen PV [ 0.000465] tsc: Detected 3092.836 MHz processor [ 0.000794] e820: update [mem 0x00000000-0x00000fff] usable ==> reserved [ 0.000798] e820: remove [mem 0x000a0000-0x000fffff] usable [ 0.000803] last_pfn = 0x20061 max_arch_pfn = 0x400000000 [ 0.000805] Disabled [ 0.000807] x86/PAT: MTRRs disabled, skipping PAT initialization too. [ 0.000811] x86/PAT: Configuration [0-7]: WB WT UC- UC WC WP UC UC [ 0.000854] Kernel/User page tables isolation: disabled on XEN PV. [ 0.021234] RAMDISK: [mem 0x04000000-0x0536afff] [ 0.021249] ACPI: Early table checksum verification disabled [ 0.022902] ACPI: RSDP 0x00000000000FE020 000024 (v02 DELL ) [ 0.022916] ACPI: XSDT 0x0000000095FCF188 0000E4 (v01 DELL PE_SC3 00000001 01000013) [ 0.022978] ACPI: FACP 0x0000000095FF7000 00010C (v05 DELL PE_SC3 00000001 DELL 00040000) [ 0.023058] ACPI: DSDT 0x0000000095FDF000 012335 (v01 DELL PE_SC3 00000000 DELL 00040000) [ 0.023072] ACPI: FACS 0x0000000095FBD000 000040 [ 0.023086] ACPI: UEFI 0x0000000095FFD000 000236 (v01 DELL PE_SC3 00000001 DELL 00040000) [ 0.023101] ACPI: UEFI 0x0000000095FFC000 000042 (v01 DELL PE_SC3 00000000 DELL 00040000) [ 0.023116] ACPI: ASF! 0x0000000095FFB000 0000A5 (v32 DELL PE_SC3 00000001 DELL 00040000) [ 0.023129] ACPI: ASPT 0x0000000095FFA000 000034 (v07 DELL PE_SC3 00000001 DELL 00040000) [ 0.023145] ACPI: BOOT 0x0000000095FF9000 000028 (v01 DELL PE_SC3 00000001 DELL 00040000) [ 0.023158] ACPI: DBGP 0x0000000095FF8000 000034 (v01 DELL PE_SC3 00000001 DELL 00040000) [ 0.023173] ACPI: HPET 0x0000000095FF6000 000038 (v01 DELL PE_SC3 00000001 DELL 00040000) [ 0.023188] ACPI: APIC 0x0000000095FF5000 000092 (v03 DELL PE_SC3 00000001 DELL 00040000) [ 0.023201] ACPI: MCFG 0x0000000095FF4000 00003C (v01 DELL PE_SC3 00000001 DELL 00040000) [ 0.023215] ACPI: SLIC 0x0000000095FF3000 000176 (v01 DELL PE_SC3 00000001 DELL 00040000) [ 0.023230] ACPI: SSDT 0x0000000095FDC000 002028 (v01 DELL PE_SC3 00001000 DELL 00040000) [ 0.023244] ACPI: SPMI 0x0000000095FDA000 000040 (v05 DELL PE_SC3 00000001 DELL 00040000) [ 0.023257] ACPI: SSDT 0x0000000095FD9000 000533 (v01 DELL PE_SC3 00003000 DELL 00040000) [ 0.023270] ACPI: SSDT 0x0000000095FD8000 000ACE (v01 DELL PE_SC3 00003000 DELL 00040000) [ 0.023285] ACPI: SSDT 0x0000000095FD4000 003492 (v01 DELL PE_SC3 00003000 DELL 00040000) [ 0.023298] ACPI: SPCR 0x0000000095FF2000 000050 (v01 DELL PE_SC3 00000001 DELL 00040000) [ 0.023312] ACPI: RMAD 0x0000000095FD3000 000080 (v01 DELL PE_SC3 00000001 DELL 00040000) [ 0.023325] ACPI: SSDT 0x0000000095FD2000 000514 (v01 DELL PE_SC3 00001000 DELL 00040000) [ 0.023339] ACPI: FPDT 0x0000000095FD1000 000044 (v01 DELL PE_SC3 00000001 DELL 00040000) [ 0.023352] ACPI: HEST 0x0000000095FD0000 0000A8 (v01 DELL PE_SC3 00000001 DELL 00040000) [ 0.023367] ACPI: ERST 0x0000000095FCE000 000230 (v01 DELL PE_SC3 00000001 DELL 00040000) [ 0.023381] ACPI: BERT 0x0000000095FCD000 000030 (v01 DELL PE_SC3 00000001 DELL 00040000) [ 0.023394] ACPI: EINJ 0x0000000095FCC000 000150 (v01 DELL PE_SC3 00000001 DELL 00040000) [ 0.023401] ACPI: Reserving FACP table memory at [mem 0x95ff7000-0x95ff710b] [ 0.023403] ACPI: Reserving DSDT table memory at [mem 0x95fdf000-0x95ff1334] [ 0.023404] ACPI: Reserving FACS table memory at [mem 0x95fbd000-0x95fbd03f] [ 0.023405] ACPI: Reserving UEFI table memory at [mem 0x95ffd000-0x95ffd235] [ 0.023406] ACPI: Reserving UEFI table memory at [mem 0x95ffc000-0x95ffc041] [ 0.023407] ACPI: Reserving ASF! table memory at [mem 0x95ffb000-0x95ffb0a4] [ 0.023407] ACPI: Reserving ASPT table memory at [mem 0x95ffa000-0x95ffa033] [ 0.023408] ACPI: Reserving BOOT table memory at [mem 0x95ff9000-0x95ff9027] [ 0.023409] ACPI: Reserving DBGP table memory at [mem 0x95ff8000-0x95ff8033] [ 0.023410] ACPI: Reserving HPET table memory at [mem 0x95ff6000-0x95ff6037] [ 0.023411] ACPI: Reserving APIC table memory at [mem 0x95ff5000-0x95ff5091] [ 0.023411] ACPI: Reserving MCFG table memory at [mem 0x95ff4000-0x95ff403b] [ 0.023412] ACPI: Reserving SLIC table memory at [mem 0x95ff3000-0x95ff3175] [ 0.023413] ACPI: Reserving SSDT table memory at [mem 0x95fdc000-0x95fde027] [ 0.023413] ACPI: Reserving SPMI table memory at [mem 0x95fda000-0x95fda03f] [ 0.023414] ACPI: Reserving SSDT table memory at [mem 0x95fd9000-0x95fd9532] [ 0.023415] ACPI: Reserving SSDT table memory at [mem 0x95fd8000-0x95fd8acd] [ 0.023415] ACPI: Reserving SSDT table memory at [mem 0x95fd4000-0x95fd7491] [ 0.023416] ACPI: Reserving SPCR table memory at [mem 0x95ff2000-0x95ff204f] [ 0.023417] ACPI: Reserving RMAD table memory at [mem 0x95fd3000-0x95fd307f] [ 0.023418] ACPI: Reserving SSDT table memory at [mem 0x95fd2000-0x95fd2513] [ 0.023419] ACPI: Reserving FPDT table memory at [mem 0x95fd1000-0x95fd1043] [ 0.023419] ACPI: Reserving HEST table memory at [mem 0x95fd0000-0x95fd00a7] [ 0.023420] ACPI: Reserving ERST table memory at [mem 0x95fce000-0x95fce22f] [ 0.023421] ACPI: Reserving BERT table memory at [mem 0x95fcd000-0x95fcd02f] [ 0.023422] ACPI: Reserving EINJ table memory at [mem 0x95fcc000-0x95fcc14f] [ 0.023482] Setting APIC routing to Xen PV. [ 0.026466] Zone ranges: [ 0.026468] DMA [mem 0x0000000000001000-0x0000000000ffffff] [ 0.026470] DMA32 [mem 0x0000000001000000-0x0000000020060fff] [ 0.026472] Normal empty [ 0.026473] Movable zone start for each node [ 0.026473] Early memory node ranges [ 0.026474] node 0: [mem 0x0000000000001000-0x000000000009efff] [ 0.026476] node 0: [mem 0x0000000000100000-0x0000000020060fff] [ 0.026478] Initmem setup node 0 [mem 0x0000000000001000-0x0000000020060fff] [ 0.026486] On node 0, zone DMA: 1 pages in unavailable ranges [ 0.026565] On node 0, zone DMA: 97 pages in unavailable ranges [ 0.029980] On node 0, zone DMA32: 32671 pages in unavailable ranges [ 0.029986] p2m virtual area at (____ptrval____), size is 40000000 [ 0.166138] Remapped 97 page(s) [ 0.166830] ACPI: PM-Timer IO Port: 0x1808 [ 0.166888] ACPI: LAPIC_NMI (acpi_id[0xff] high edge lint[0x1]) [ 0.166929] IOAPIC[0]: apic_id 2, version 32, address 0xfec00000, GSI 0-23 [ 0.166944] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl) [ 0.166949] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level) [ 0.166977] ACPI: Using ACPI (MADT) for SMP configuration information [ 0.166984] ACPI: HPET id: 0x8086a201 base: 0xfed00000 [ 0.166995] ACPI: SPCR: SPCR table version 1 [ 0.166999] ACPI: SPCR: console: uart,io,0x3f8,115200 [ 0.167053] smpboot: Allowing 4 CPUs, 0 hotplug CPUs [ 0.167073] PM: hibernation: Registered nosave memory: [mem 0x00000000-0x00000fff] [ 0.167076] PM: hibernation: Registered nosave memory: [mem 0x0009f000-0x000fffff] [ 0.167078] [mem 0x20061000-0x9573efff] available for PCI devices [ 0.167083] Booting kernel on Xen [ 0.167084] Xen version: 4.19-unstable (preserve-AD) [ 0.167089] clocksource: refined-jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 1910969940391419 ns [ 0.172405] setup_percpu: NR_CPUS:64 nr_cpumask_bits:4 nr_cpu_ids:4 nr_node_ids:1 [ 0.172928] percpu: Embedded 54 pages/cpu s180520 r8192 d32472 u524288 [ 0.172936] pcpu-alloc: s180520 r8192 d32472 u524288 alloc=1*2097152 [ 0.172939] pcpu-alloc: [0] 0 1 2 3 [ 0.173021] xen: PV spinlocks enabled [ 0.173028] PV qspinlock hash table entries: 256 (order: 0, 4096 bytes, linear) [ 0.173035] Built 1 zonelists, mobility grouping on. Total pages: 129006 [ 0.173037] Kernel command line: placeholder root=/dev/mapper/godello0--vg-root ro console=hvc0 [ 0.173100] Unknown kernel command line parameters "placeholder", will be passed to user space. [ 0.173121] random: crng init done [ 0.173200] Dentry cache hash table entries: 65536 (order: 7, 524288 bytes, linear) [ 0.173243] Inode-cache hash table entries: 32768 (order: 6, 262144 bytes, linear) [ 0.173857] mem auto-init: stack:all(zero), heap alloc:off, heap free:off [ 0.173863] software IO TLB: area num 4. [ 0.249346] Memory: 390896K/524284K available (14349K kernel code, 2682K rwdata, 4576K rodata, 1576K init, 1296K bss, 133136K reserved, 0K cma-reserved) [ 0.249479] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1 [ 0.251813] Dynamic Preempt: voluntary [ 0.251883] rcu: Preemptible hierarchical RCU implementation. [ 0.251884] rcu: RCU event tracing is enabled. [ 0.251885] rcu: RCU restricting CPUs from NR_CPUS=64 to nr_cpu_ids=4. [ 0.251887] Trampoline variant of Tasks RCU enabled. [ 0.251888] rcu: RCU calculated value of scheduler-enlistment delay is 100 jiffies. [ 0.251889] rcu: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=4 [ 0.259550] NR_IRQS: 4352, nr_irqs: 456, preallocated irqs: 16 [ 0.259660] xen:events: Using FIFO-based ABI [ 0.259687] xen: --> pirq=1 -> irq=1 (gsi=1) [ 0.259693] xen: --> pirq=2 -> irq=2 (gsi=2) [ 0.259699] xen: --> pirq=3 -> irq=3 (gsi=3) [ 0.259704] xen: --> pirq=4 -> irq=4 (gsi=4) [ 0.259710] xen: --> pirq=5 -> irq=5 (gsi=5) [ 0.259719] xen: --> pirq=6 -> irq=6 (gsi=6) [ 0.259724] xen: --> pirq=7 -> irq=7 (gsi=7) [ 0.259730] xen: --> pirq=8 -> irq=8 (gsi=8) [ 0.259735] xen: --> pirq=9 -> irq=9 (gsi=9) [ 0.259740] xen: --> pirq=10 -> irq=10 (gsi=10) [ 0.259746] xen: --> pirq=11 -> irq=11 (gsi=11) [ 0.259751] xen: --> pirq=12 -> irq=12 (gsi=12) [ 0.259757] xen: --> pirq=13 -> irq=13 (gsi=13) [ 0.259763] xen: --> pirq=14 -> irq=14 (gsi=14) [ 0.259768] xen: --> pirq=15 -> irq=15 (gsi=15) [ 0.259780] rcu: srcu_init: Setting srcu_struct sizes based on contention. [ 0.268979] Console: colour VGA+ 80x25 [ 0.288141] printk: console [tty0] enabled [ 0.289187] printk: console [hvc0] enabled [ 0.289341] ACPI: Core revision 20220331 [ 0.309700] clocksource: xen: mask: 0xffffffffffffffff max_cycles: 0x1cd42e4dffb, max_idle_ns: 881590591483 ns [ 0.309903] Xen: using vcpuop timer interface [ 0.309915] installing Xen timer for CPU 0 [ 0.310100] clocksource: tsc-early: mask: 0xffffffffffffffff max_cycles: 0x2c94d83b270, max_idle_ns: 440795286026 ns [ 0.310292] Calibrating delay loop (skipped), value calculated using timer frequency.. 6185.67 BogoMIPS (lpj=3092836) [ 0.310625] Last level iTLB entries: 4KB 1024, 2MB 1024, 4MB 1024 [ 0.310771] Last level dTLB entries: 4KB 1024, 2MB 1024, 4MB 1024, 1GB 4 [ 0.310919] Spectre V1 : Mitigation: usercopy/swapgs barriers and __user pointer sanitization [ 0.311300] Spectre V2 : Mitigation: Retpolines [ 0.311439] Spectre V2 : Spectre v2 / SpectreRSB mitigation: Filling RSB on context switch [ 0.311615] Spectre V2 : Spectre v2 / SpectreRSB : Filling RSB on VMEXIT [ 0.311759] Spectre V2 : Enabling Restricted Speculation for firmware calls [ 0.311912] Spectre V2 : mitigation: Enabling conditional Indirect Branch Prediction Barrier [ 0.312084] Spectre V2 : User space: Mitigation: STIBP via prctl [ 0.312228] Speculative Store Bypass: Mitigation: Speculative Store Bypass disabled via prctl [ 0.312295] MDS: Mitigation: Clear CPU buffers [ 0.312434] MMIO Stale Data: Unknown: No mitigations [ 0.312573] SRBDS: Unknown: Dependent on hypervisor status [ 0.312735] x86/fpu: Supporting XSAVE feature 0x001: 'x87 floating point registers' [ 0.312913] x86/fpu: Supporting XSAVE feature 0x002: 'SSE registers' [ 0.313078] x86/fpu: Supporting XSAVE feature 0x004: 'AVX registers' [ 0.313222] x86/fpu: xstate_offset[2]: 576, xstate_sizes[2]: 256 [ 0.313292] x86/fpu: Enabled xstate features 0x7, context size is 832 bytes, using 'standard' format. [ 0.330969] Freeing SMP alternatives memory: 40K [ 0.331136] pid_max: default: 32768 minimum: 301 [ 0.331305] LSM: Security Framework initializing [ 0.331449] SELinux: Initializing. [ 0.331628] Mount-cache hash table entries: 1024 (order: 1, 8192 bytes, linear) [ 0.331804] Mountpoint-cache hash table entries: 1024 (order: 1, 8192 bytes, linear) [ 0.332405] cpu 0 spinlock event irq 25 [ 0.332550] VPMU disabled by hypervisor. [ 0.332951] cblist_init_generic: Setting adjustable number of callback queues. [ 0.333127] cblist_init_generic: Setting shift to 2 and lim to 1. [ 0.333302] Performance Events: unsupported p6 CPU model 60 no PMU driver, software events only. [ 0.333580] signal: max sigframe size: 1776 [ 0.333759] rcu: Hierarchical SRCU implementation. [ 0.333902] rcu: Max phase no-delay instances is 400. [ 0.334383] smp: Bringing up secondary CPUs ... [ 0.334694] installing Xen timer for CPU 1 [ 0.335175] cpu 1 spinlock event irq 35 [ 0.335453] MDS CPU bug present and SMT on, data leak possible. See https://www.kernel.org/doc/html/latest/admin-guide/hw-vuln/mds.html for more details. [ 0.336429] installing Xen timer for CPU 2 [ 0.336826] cpu 2 spinlock event irq 41 [ 0.336826] installing Xen timer for CPU 3 [ 0.337549] cpu 3 spinlock event irq 47 [ 0.337549] smp: Brought up 1 node, 4 CPUs [ 0.337549] smpboot: Max logical packages: 1 [ 0.338343] devtmpfs: initialized [ 0.338486] x86/mm: Memory block size: 128MB [ 0.338799] ACPI: PM: Registering ACPI NVS region [mem 0x95bbf000-0x95fbefff] (4194304 bytes) [ 0.338799] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 1911260446275000 ns [ 0.339297] futex hash table entries: 1024 (order: 4, 65536 bytes, linear) [ 0.339566] PM: RTC time: 05:39:05, date: 2024-06-22 [ 0.339797] NET: Registered PF_NETLINK/PF_ROUTE protocol family [ 0.339970] xen:grant_table: Grant tables using version 1 layout [ 0.340129] Grant table initialized [ 0.340379] audit: initializing netlink subsys (disabled) [ 0.340542] audit: type=2000 audit(1719034746.446:1): state=initialized audit_enabled=0 res=1 [ 0.340542] thermal_sys: Registered thermal governor 'step_wise' [ 0.340542] thermal_sys: Registered thermal governor 'user_space' [ 0.340542] Simple Boot Flag at 0x44 set to 0x1 [ 0.341322] ACPI FADT declares the system doesn't support PCIe ASPM, so disable it [ 0.341647] PCI: MMCONFIG for domain 0000 [bus 00-7f] at [mem 0xf0000000-0xf7ffffff] (base 0xf0000000) [ 0.341833] PCI: MMCONFIG at [mem 0xf0000000-0xf7ffffff] reserved in E820 [ 0.386901] PCI: Using configuration type 1 for base access [ 0.387224] PCI: Dell System detected, enabling pci=bfsort. [ 0.389331] kprobes: kprobe jump-optimization is enabled. All kprobes are optimized if possible. [ 0.389524] ACPI: Added _OSI(Module Device) [ 0.389524] ACPI: Added _OSI(Processor Device) [ 0.390295] ACPI: Added _OSI(3.0 _SCP Extensions) [ 0.390437] ACPI: Added _OSI(Processor Aggregator Device) [ 0.400127] ACPI: 6 ACPI AML tables successfully acquired and loaded [ 0.400902] xen: registering gsi 9 triggering 0 polarity 0 [ 0.401370] ACPI: [Firmware Bug]: BIOS _OSI(Linux) query ignored [ 0.405544] ACPI: Dynamic OEM Table Load: [ 0.405690] ACPI: SSDT 0xFFFF888003589C00 0003D3 (v01 PmRef Cpu0Cst 00003001 INTL 20120816) [ 0.406596] ACPI: Dynamic OEM Table Load: [ 0.406739] ACPI: SSDT 0xFFFF8880036F5800 0005AA (v01 PmRef ApIst 00003000 INTL 20120816) [ 0.407539] ACPI: Dynamic OEM Table Load: [ 0.407680] ACPI: SSDT 0xFFFF88800354F800 000119 (v01 PmRef ApCst 00003000 INTL 20120816) [ 0.408962] ACPI: Interpreter enabled [ 0.409111] ACPI: PM: (supports S0 S4 S5) [ 0.409245] ACPI: Using IOAPIC for interrupt routing [ 0.409317] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug [ 0.409495] PCI: Using E820 reservations for host bridge windows [ 0.409881] ACPI: Enabled 11 GPEs in block 00 to 3F [ 0.415771] acpi ABCD0000:00: ACPI dock station (docks/bays count: 1) [ 0.423525] ACPI: PM: Power Resource [FN00] [ 0.423699] ACPI: PM: Power Resource [FN01] [ 0.423870] ACPI: PM: Power Resource [FN02] [ 0.424041] ACPI: PM: Power Resource [FN03] [ 0.424216] ACPI: PM: Power Resource [FN04] [ 0.424993] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-7e]) [ 0.425150] acpi PNP0A08:00: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI HPX-Type3] [ 0.426100] acpi PNP0A08:00: _OSC: OS now controls [PME PCIeCapability LTR] [ 0.426247] acpi PNP0A08:00: FADT indicates ASPM is unsupported, using BIOS configuration [ 0.426771] PCI host bridge to bus 0000:00 [ 0.426910] pci_bus 0000:00: root bus resource [io 0x0000-0x0cf7 window] [ 0.427059] pci_bus 0000:00: root bus resource [io 0x0d00-0xffff window] [ 0.427199] pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff window] [ 0.427293] pci_bus 0000:00: root bus resource [mem 0xa0000000-0xfeafffff window] [ 0.427465] pci_bus 0000:00: root bus resource [bus 00-7e] [ 0.427636] pci 0000:00:00.0: [8086:0c08] type 00 class 0x060000 [ 0.428188] pci 0000:00:14.0: [8086:8c31] type 00 class 0x0c0330 [ 0.428370] pci 0000:00:14.0: reg 0x10: [mem 0xa2b00000-0xa2b0ffff 64bit] [ 0.428782] pci 0000:00:14.0: PME# supported from D3hot D3cold [ 0.429152] pci 0000:00:1a.0: [8086:8c2d] type 00 class 0x0c0320 [ 0.429349] pci 0000:00:1a.0: reg 0x10: [mem 0xa2b12000-0xa2b123ff] [ 0.429804] pci 0000:00:1a.0: PME# supported from D0 D3hot D3cold [ 0.430129] pci 0000:00:1c.0: [8086:8c10] type 01 class 0x060400 [ 0.430628] pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold [ 0.430841] pci 0000:00:1c.0: Enabling MPC IRBNCE [ 0.430983] pci 0000:00:1c.0: Intel PCH root port ACS workaround enabled [ 0.431465] pci 0000:00:1c.2: [8086:8c14] type 01 class 0x060400 [ 0.432018] pci 0000:00:1c.2: PME# supported from D0 D3hot D3cold [ 0.432229] pci 0000:00:1c.2: Enabling MPC IRBNCE [ 0.432302] pci 0000:00:1c.2: Intel PCH root port ACS workaround enabled [ 0.432805] pci 0000:00:1d.0: [8086:8c26] type 00 class 0x0c0320 [ 0.433007] pci 0000:00:1d.0: reg 0x10: [mem 0xa2b11000-0xa2b113ff] [ 0.433467] pci 0000:00:1d.0: PME# supported from D0 D3hot D3cold [ 0.433793] pci 0000:00:1f.0: [8086:8c52] type 00 class 0x060100 [ 0.434438] pci 0000:00:1f.2: [8086:8c02] type 00 class 0x010601 [ 0.434641] pci 0000:00:1f.2: reg 0x10: [io 0x3048-0x304f] [ 0.434814] pci 0000:00:1f.2: reg 0x14: [io 0x3054-0x3057] [ 0.434983] pci 0000:00:1f.2: reg 0x18: [io 0x3040-0x3047] [ 0.435152] pci 0000:00:1f.2: reg 0x1c: [io 0x3050-0x3053] [ 0.435327] pci 0000:00:1f.2: reg 0x20: [io 0x3020-0x303f] [ 0.435497] pci 0000:00:1f.2: reg 0x24: [mem 0xa2b10000-0xa2b107ff] [ 0.435808] pci 0000:00:1f.2: PME# supported from D3hot [ 0.436080] pci 0000:00:1f.3: [8086:8c22] type 00 class 0x0c0500 [ 0.436302] pci 0000:00:1f.3: reg 0x10: [mem 0xa2b13000-0xa2b130ff 64bit] [ 0.436534] pci 0000:00:1f.3: reg 0x20: [io 0x3000-0x301f] [ 0.437100] pci 0000:01:00.0: [14e4:165f] type 00 class 0x020000 [ 0.437394] pci 0000:01:00.0: reg 0x10: [mem 0xa2a30000-0xa2a3ffff 64bit pref] [ 0.437690] pci 0000:01:00.0: reg 0x18: [mem 0xa2a40000-0xa2a4ffff 64bit pref] [ 0.437976] pci 0000:01:00.0: reg 0x20: [mem 0xa2a50000-0xa2a5ffff 64bit pref] [ 0.438241] pci 0000:01:00.0: reg 0x30: [mem 0x00000000-0x0003ffff pref] [ 0.438712] pci 0000:01:00.0: PME# supported from D0 D3hot D3cold [ 0.439438] pci 0000:01:00.1: [14e4:165f] type 00 class 0x020000 [ 0.439728] pci 0000:01:00.1: reg 0x10: [mem 0xa2a00000-0xa2a0ffff 64bit pref] [ 0.440018] pci 0000:01:00.1: reg 0x18: [mem 0xa2a10000-0xa2a1ffff 64bit pref] [ 0.440356] pci 0000:01:00.1: reg 0x20: [mem 0xa2a20000-0xa2a2ffff 64bit pref] [ 0.440625] pci 0000:01:00.1: reg 0x30: [mem 0x00000000-0x0003ffff pref] [ 0.441175] pci 0000:01:00.1: PME# supported from D0 D3hot D3cold [ 0.441939] pci 0000:00:1c.0: PCI bridge to [bus 01] [ 0.442113] pci 0000:00:1c.0: bridge window [mem 0xa2a00000-0xa2afffff 64bit pref] [ 0.442840] pci 0000:02:00.0: [1912:0013] type 01 class 0x060400 [ 0.445968] pci 0000:02:00.0: PME# supported from D0 D3hot D3cold [ 0.447515] pci 0000:00:1c.2: PCI bridge to [bus 02-06] [ 0.447672] pci 0000:00:1c.2: bridge window [mem 0xa2000000-0xa29fffff] [ 0.447832] pci 0000:00:1c.2: bridge window [mem 0xa1000000-0xa1ffffff 64bit pref] [ 0.449292] pci 0000:03:00.0: [1912:0013] type 01 class 0x060400 [ 0.452770] pci 0000:03:00.0: PME# supported from D0 D3hot D3cold [ 0.454582] pci 0000:03:01.0: [1912:0013] type 01 class 0x060400 [ 0.458239] pci 0000:03:01.0: PME# supported from D0 D3hot D3cold [ 0.461737] pci 0000:02:00.0: PCI bridge to [bus 03-06] [ 0.462083] pci 0000:02:00.0: bridge window [mem 0xa2000000-0xa29fffff] [ 0.462361] pci 0000:02:00.0: bridge window [mem 0xa1000000-0xa1ffffff 64bit pref] [ 0.463858] pci 0000:04:00.0: [1912:0012] type 01 class 0x060400 [ 0.468413] pci 0000:03:00.0: PCI bridge to [bus 04-05] [ 0.468765] pci 0000:03:00.0: bridge window [mem 0xa2000000-0xa28fffff] [ 0.469050] pci 0000:03:00.0: bridge window [mem 0xa1000000-0xa1ffffff 64bit pref] [ 0.470292] pci_bus 0000:05: extended config space not accessible [ 0.470673] pci 0000:05:00.0: [102b:0534] type 00 class 0x030000 [ 0.471292] pci 0000:05:00.0: reg 0x10: [mem 0xa1000000-0xa1ffffff pref] [ 0.472559] pci 0000:05:00.0: reg 0x14: [mem 0xa2800000-0xa2803fff] [ 0.472973] pci 0000:05:00.0: reg 0x18: [mem 0xa2000000-0xa27fffff] [ 0.474442] pci 0000:05:00.0: Video device with shadowed ROM at [mem 0x000c0000-0x000dffff] [ 0.477886] pci 0000:04:00.0: PCI bridge to [bus 05] [ 0.478243] pci 0000:04:00.0: bridge window [mem 0xa2000000-0xa28fffff] [ 0.478440] pci 0000:04:00.0: bridge window [mem 0xa1000000-0xa1ffffff 64bit pref] [ 0.480237] pci 0000:06:00.0: [1912:0011] type 00 class 0x050000 [ 0.480784] pci 0000:06:00.0: reg 0x10: [mem 0xa2901000-0xa2901fff] [ 0.481190] pci 0000:06:00.0: reg 0x14: [mem 0xa2900000-0xa290007f] [ 0.483592] pci 0000:06:00.0: PME# supported from D3hot [ 0.484450] pci 0000:03:01.0: PCI bridge to [bus 06] [ 0.484807] pci 0000:03:01.0: bridge window [mem 0xa2900000-0xa29fffff] [ 0.486082] pci_bus 0000:00: on NUMA node 0 [ 0.486274] xen: registering gsi 13 triggering 1 polarity 0 [ 0.487262] ACPI: PCI: Interrupt link LNKA configured for IRQ 10 [ 0.487364] ACPI: PCI: Interrupt link LNKB configured for IRQ 11 [ 0.487570] ACPI: PCI: Interrupt link LNKC configured for IRQ 10 [ 0.487789] ACPI: PCI: Interrupt link LNKD configured for IRQ 10 [ 0.488004] ACPI: PCI: Interrupt link LNKE configured for IRQ 0 [ 0.488146] ACPI: PCI: Interrupt link LNKE disabled [ 0.488349] ACPI: PCI: Interrupt link LNKF configured for IRQ 0 [ 0.488492] ACPI: PCI: Interrupt link LNKF disabled [ 0.488697] ACPI: PCI: Interrupt link LNKG configured for IRQ 0 [ 0.488835] ACPI: PCI: Interrupt link LNKG disabled [ 0.489046] ACPI: PCI: Interrupt link LNKH configured for IRQ 11 [ 0.490770] xen:balloon: Initialising balloon driver [ 0.490924] iommu: Default domain type: Translated [ 0.490924] iommu: DMA domain TLB invalidation policy: lazy mode [ 0.491340] SCSI subsystem initialized [ 0.491486] libata version 3.00 loaded. [ 0.491486] ACPI: bus type USB registered [ 0.491486] usbcore: registered new interface driver usbfs [ 0.491616] usbcore: registered new interface driver hub [ 0.491761] usbcore: registered new device driver usb [ 0.491908] pps_core: LinuxPPS API ver. 1 registered [ 0.492295] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti [ 0.492489] PTP clock support registered [ 0.492645] Advanced Linux Sound Architecture Driver Initialized. [ 0.492645] NetLabel: Initializing [ 0.492693] NetLabel: domain hash size = 128 [ 0.492831] NetLabel: protocols = UNLABELED CIPSOv4 CALIPSO [ 0.493306] NetLabel: unlabeled traffic allowed by default [ 0.493459] PCI: Using ACPI for IRQ routing [ 0.509794] PCI: pci_cache_line_size set to 64 bytes [ 0.510423] e820: reserve RAM buffer [mem 0x0009f000-0x0009ffff] [ 0.510425] e820: reserve RAM buffer [mem 0x20061000-0x23ffffff] [ 0.510458] pci 0000:05:00.0: vgaarb: setting as boot VGA device [ 0.510614] pci 0000:05:00.0: vgaarb: bridge control possible [ 0.510756] pci 0000:05:00.0: vgaarb: VGA device added: decodes=io+mem,owns=io+mem,locks=none [ 0.510933] vgaarb: loaded [ 0.512470] clocksource: Switched to clocksource tsc-early [ 0.512667] VFS: Disk quotas dquot_6.6.0 [ 0.512809] VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes) [ 0.512969] hugetlbfs: disabling because there are no supported hugepage sizes [ 0.513147] pnp: PnP ACPI init [ 0.513240] system 00:00: [io 0x0680-0x069f] has been reserved [ 0.513386] system 00:00: [io 0xffff] has been reserved [ 0.513528] system 00:00: [io 0xffff] has been reserved [ 0.513666] system 00:00: [io 0xffff] has been reserved [ 0.513806] system 00:00: [io 0x1800-0x18fe] has been reserved [ 0.513948] system 00:00: [io 0x164e-0x164f] has been reserved [ 0.514121] system 00:01: [io 0x0800-0x087f] has been reserved [ 0.514305] xen: registering gsi 8 triggering 1 polarity 0 [ 0.514362] system 00:03: [io 0x1854-0x1857] has been reserved [ 0.514796] xen: registering gsi 3 triggering 1 polarity 0 [ 0.515035] xen: registering gsi 4 triggering 1 polarity 0 [ 0.515038] Already setup the GSI :4 [ 0.515358] system 00:06: [mem 0xfed1c000-0xfed1ffff] has been reserved [ 0.515501] system 00:06: [mem 0xfed10000-0xfed17fff] has been reserved [ 0.515644] system 00:06: [mem 0xfed18000-0xfed18fff] has been reserved [ 0.515789] system 00:06: [mem 0xfed19000-0xfed19fff] has been reserved [ 0.515930] system 00:06: [mem 0xf0000000-0xf7ffffff] has been reserved [ 0.516074] system 00:06: [mem 0xfed20000-0xfed3ffff] has been reserved [ 0.516219] system 00:06: [mem 0xfed90000-0xfed93fff] could not be reserved [ 0.516365] system 00:06: [mem 0xff000000-0xffffffff] could not be reserved [ 0.516510] system 00:06: [mem 0xfee00000-0xfeefffff] has been reserved [ 0.516657] system 00:06: [mem 0xa0000000-0xa0000fff] has been reserved [ 0.516802] system 00:06: [mem 0xa0020000-0xa002ffff] has been reserved [ 0.517798] pnp: PnP ACPI: found 7 devices [ 0.539514] PM-Timer failed consistency check (0xffffff) - aborting. [ 0.539709] NET: Registered PF_INET protocol family [ 0.539884] IP idents hash table entries: 8192 (order: 4, 65536 bytes, linear) [ 0.540211] tcp_listen_portaddr_hash hash table entries: 256 (order: 0, 4096 bytes, linear) [ 0.540397] Table-perturb hash table entries: 65536 (order: 6, 262144 bytes, linear) [ 0.540586] TCP established hash table entries: 4096 (order: 3, 32768 bytes, linear) [ 0.540781] TCP bind hash table entries: 4096 (order: 5, 131072 bytes, linear) [ 0.540972] TCP: Hash tables configured (established 4096 bind 4096) [ 0.541130] UDP hash table entries: 256 (order: 1, 8192 bytes, linear) [ 0.541275] UDP-Lite hash table entries: 256 (order: 1, 8192 bytes, linear) [ 0.541454] NET: Registered PF_UNIX/PF_LOCAL protocol family [ 0.541770] RPC: Registered named UNIX socket transport module. [ 0.541913] RPC: Registered udp transport module. [ 0.542052] RPC: Registered tcp transport module. [ 0.542190] RPC: Registered tcp NFSv4.1 backchannel transport module. [ 0.542592] clipped [mem size 0x00020000] to [mem size 0xfffffffffffc0000] for e820 entry [mem 0x0009f000-0x000fffff] [ 0.542779] pci 0000:00:1c.0: BAR 14: assigned [mem 0xa0100000-0xa01fffff] [ 0.542928] pci 0000:01:00.0: BAR 6: assigned [mem 0xa0100000-0xa013ffff pref] [ 0.543116] pci 0000:01:00.1: BAR 6: assigned [mem 0xa0140000-0xa017ffff pref] [ 0.543288] pci 0000:00:1c.0: PCI bridge to [bus 01] [ 0.543454] pci 0000:00:1c.0: bridge window [mem 0xa0100000-0xa01fffff] [ 0.543613] pci 0000:00:1c.0: bridge window [mem 0xa2a00000-0xa2afffff 64bit pref] [ 0.543806] pci 0000:04:00.0: PCI bridge to [bus 05] [ 0.544087] pci 0000:04:00.0: bridge window [mem 0xa2000000-0xa28fffff] [ 0.544328] pci 0000:04:00.0: bridge window [mem 0xa1000000-0xa1ffffff 64bit pref] [ 0.544710] pci 0000:03:00.0: PCI bridge to [bus 04-05] [ 0.544992] pci 0000:03:00.0: bridge window [mem 0xa2000000-0xa28fffff] [ 0.545228] pci 0000:03:00.0: bridge window [mem 0xa1000000-0xa1ffffff 64bit pref] [ 0.545600] pci 0000:03:01.0: PCI bridge to [bus 06] [ 0.545881] pci 0000:03:01.0: bridge window [mem 0xa2900000-0xa29fffff] [ 0.546382] pci 0000:02:00.0: PCI bridge to [bus 03-06] [ 0.546663] pci 0000:02:00.0: bridge window [mem 0xa2000000-0xa29fffff] [ 0.546893] pci 0000:02:00.0: bridge window [mem 0xa1000000-0xa1ffffff 64bit pref] [ 0.547321] pci 0000:00:1c.2: PCI bridge to [bus 02-06] [ 0.547472] pci 0000:00:1c.2: bridge window [mem 0xa2000000-0xa29fffff] [ 0.547629] pci 0000:00:1c.2: bridge window [mem 0xa1000000-0xa1ffffff 64bit pref] [ 0.547821] pci_bus 0000:00: resource 4 [io 0x0000-0x0cf7 window] [ 0.547965] pci_bus 0000:00: resource 5 [io 0x0d00-0xffff window] [ 0.548108] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff window] [ 0.548251] pci_bus 0000:00: resource 7 [mem 0xa0000000-0xfeafffff window] [ 0.548400] pci_bus 0000:01: resource 1 [mem 0xa0100000-0xa01fffff] [ 0.548544] pci_bus 0000:01: resource 2 [mem 0xa2a00000-0xa2afffff 64bit pref] [ 0.548716] pci_bus 0000:02: resource 1 [mem 0xa2000000-0xa29fffff] [ 0.548858] pci_bus 0000:02: resource 2 [mem 0xa1000000-0xa1ffffff 64bit pref] [ 0.549029] pci_bus 0000:03: resource 1 [mem 0xa2000000-0xa29fffff] [ 0.549178] pci_bus 0000:03: resource 2 [mem 0xa1000000-0xa1ffffff 64bit pref] [ 0.549354] pci_bus 0000:04: resource 1 [mem 0xa2000000-0xa28fffff] [ 0.549494] pci_bus 0000:04: resource 2 [mem 0xa1000000-0xa1ffffff 64bit pref] [ 0.549666] pci_bus 0000:05: resource 1 [mem 0xa2000000-0xa28fffff] [ 0.549803] pci_bus 0000:05: resource 2 [mem 0xa1000000-0xa1ffffff 64bit pref] [ 0.549975] pci_bus 0000:06: resource 1 [mem 0xa2900000-0xa29fffff] [ 0.550250] xen: registering gsi 16 triggering 0 polarity 1 [ 0.550268] xen: --> pirq=16 -> irq=16 (gsi=16) [ 0.551716] xen: registering gsi 16 triggering 0 polarity 1 [ 0.551719] Already setup the GSI :16 [ 0.563414] pci 0000:00:1a.0: quirk_usb_early_handoff+0x0/0x720 took 11473 usecs [ 0.563659] xen: registering gsi 23 triggering 0 polarity 1 [ 0.563672] xen: --> pirq=23 -> irq=23 (gsi=23) [ 0.575418] pci 0000:00:1d.0: quirk_usb_early_handoff+0x0/0x720 took 11528 usecs [ 0.575902] PCI: CLS 64 bytes, default 64 [ 0.576044] PCI-DMA: Using software bounce buffering for IO (SWIOTLB) [ 0.576087] Unpacking initramfs... [ 0.576189] software IO TLB: mapped [mem 0x000000001b180000-0x000000001f180000] (64MB) [ 0.576582] kvm: no hardware support for 'kvm_intel' [ 0.576723] has_svm: not amd or hygon [ 0.576859] kvm: no hardware support for 'kvm_amd' [ 0.577001] clocksource: tsc: mask: 0xffffffffffffffff max_cycles: 0x2c94d83b270, max_idle_ns: 440795286026 ns [ 0.577222] clocksource: Switched to clocksource tsc [ 0.578105] Initialise system trusted keyrings [ 0.578320] workingset: timestamp_bits=62 max_order=17 bucket_order=0 [ 0.579424] NFS: Registering the id_resolver key type [ 0.579579] Key type id_resolver registered [ 0.579716] Key type id_legacy registered [ 0.579886] 9p: Installing v9fs 9p2000 file system support [ 0.590136] Key type asymmetric registered [ 0.590318] Asymmetric key parser 'x509' registered [ 0.590478] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 251) [ 0.590666] io scheduler mq-deadline registered [ 0.590805] io scheduler kyber registered [ 0.591378] xen: registering gsi 16 triggering 0 polarity 1 [ 0.591384] Already setup the GSI :16 [ 0.591738] pcieport 0000:00:1c.0: PME: Signaling with IRQ 50 [ 0.592136] xen: registering gsi 18 triggering 0 polarity 1 [ 0.592149] xen: --> pirq=18 -> irq=18 (gsi=18) [ 0.592321] pcieport 0000:00:1c.2: PME: Signaling with IRQ 51 [ 0.596829] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input0 [ 0.597314] ACPI: button: Power Button [PWRF] [ 0.597958] Monitor-Mwait will be used to enter C-1 state [ 0.597984] Monitor-Mwait will be used to enter C-2 state [ 0.598031] ACPI: \_PR_.CPU0: Found 2 idle states [ 0.598370] ACPI: \_PR_.CPU1: Found 2 idle states [ 0.610490] ACPI: \_PR_.CPU2: Found 2 idle states [ 0.610802] ACPI: \_PR_.CPU3: Found 2 idle states [ 0.611341] thermal LNXTHERM:00: registered as thermal_zone0 [ 0.611487] ACPI: thermal: Thermal Zone [TZ00] (28 C) [ 0.611857] thermal LNXTHERM:01: registered as thermal_zone1 [ 0.612034] ACPI: thermal: Thermal Zone [TZ01] (30 C) [ 0.612386] xen:xen_evtchn: Event-channel device installed [ 0.612601] xen_pciback: backend is vpci [ 0.613119] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled [ 0.613359] 00:04: ttyS1 at I/O 0x2f8 (irq = 3, base_baud = 115200) is a 16550A [ 0.614005] hpet_acpi_add: no address or irqs in _CRS [ 0.614193] Non-volatile memory driver v1.3 [ 0.614332] AMD-Vi: AMD IOMMUv2 functionality not available on this system - This is not a bug. [ 0.615838] loop: module loaded [ 0.619366] ahci 0000:00:1f.2: version 3.0 [ 0.619463] xen: registering gsi 19 triggering 0 polarity 1 [ 0.619483] xen: --> pirq=19 -> irq=19 (gsi=19) [ 0.619651] ahci 0000:00:1f.2: SSS flag set, parallel bus scan disabled [ 0.619835] ahci 0000:00:1f.2: AHCI 0001.0300 32 slots 6 ports 6 Gbps 0x31 impl SATA mode [ 0.620012] ahci 0000:00:1f.2: flags: 64bit ncq stag pm led clo pio slum part ems sxs apst [ 0.625985] scsi host0: ahci [ 0.626332] scsi host1: ahci [ 0.626636] scsi host2: ahci [ 0.626919] scsi host3: ahci [ 0.627176] scsi host4: ahci [ 0.627433] scsi host5: ahci [ 0.627612] ata1: SATA max UDMA/133 abar m2048@0xa2b10000 port 0xa2b10100 irq 53 [ 0.627785] ata2: DUMMY [ 0.627911] ata3: DUMMY [ 0.628040] ata4: DUMMY [ 0.628170] ata5: SATA max UDMA/133 abar m2048@0xa2b10000 port 0xa2b10300 irq 53 [ 0.628343] ata6: SATA max UDMA/133 abar m2048@0xa2b10000 port 0xa2b10380 irq 53 [ 0.628690] tun: Universal TUN/TAP device driver, 1.6 [ 0.629015] xen: registering gsi 16 triggering 0 polarity 1 [ 0.629021] Already setup the GSI :16 [ 0.648189] Freeing initrd memory: 19884K [ 0.663365] tg3 0000:01:00.0 eth0: Tigon3 [partno(BCM95720) rev 5720000] (PCI Express) MAC address 54:9f:35:05:fd:58 [ 0.663563] tg3 0000:01:00.0 eth0: attached PHY is 5720C (10/100/1000Base-T Ethernet) (WireSpeed[1], EEE[1]) [ 0.663744] tg3 0000:01:00.0 eth0: RXcsums[1] LinkChgREG[0] MIirq[0] ASF[1] TSOcap[1] [ 0.663918] tg3 0000:01:00.0 eth0: dma_rwctrl[00000001] dma_mask[64-bit] [ 0.664466] xen: registering gsi 17 triggering 0 polarity 1 [ 0.664489] xen: --> pirq=17 -> irq=17 (gsi=17) [ 0.714141] tg3 0000:01:00.1 eth1: Tigon3 [partno(BCM95720) rev 5720000] (PCI Express) MAC address 54:9f:35:05:fd:5a [ 0.714329] tg3 0000:01:00.1 eth1: attached PHY is 5720C (10/100/1000Base-T Ethernet) (WireSpeed[1], EEE[1]) [ 0.714555] tg3 0000:01:00.1 eth1: RXcsums[1] LinkChgREG[0] MIirq[0] ASF[1] TSOcap[1] [ 0.714729] tg3 0000:01:00.1 eth1: dma_rwctrl[00000001] dma_mask[64-bit] [ 0.715160] e100: Intel(R) PRO/100 Network Driver [ 0.715300] e100: Copyright(c) 1999-2006 Intel Corporation [ 0.715450] sky2: driver version 1.30 [ 0.715616] xen_netfront: Initialising Xen virtual ethernet driver [ 0.715967] xen: registering gsi 16 triggering 0 polarity 1 [ 0.715971] Already setup the GSI :16 [ 0.716159] ehci-pci 0000:00:1a.0: EHCI Host Controller [ 0.716369] ehci-pci 0000:00:1a.0: new USB bus registered, assigned bus number 1 [ 0.716585] ehci-pci 0000:00:1a.0: debug port 2 [ 0.720720] ehci-pci 0000:00:1a.0: irq 16, io mem 0xa2b12000 [ 0.727563] ehci-pci 0000:00:1a.0: USB 2.0 started, EHCI 1.00 [ 0.727824] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 6.01 [ 0.728000] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 0.728172] usb usb1: Product: EHCI Host Controller [ 0.728346] usb usb1: Manufacturer: Linux 6.1.95+ ehci_hcd [ 0.728485] usb usb1: SerialNumber: 0000:00:1a.0 [ 0.728762] hub 1-0:1.0: USB hub found [ 0.728909] hub 1-0:1.0: 2 ports detected [ 0.729260] xen: registering gsi 23 triggering 0 polarity 1 [ 0.729264] Already setup the GSI :23 [ 0.729447] ehci-pci 0000:00:1d.0: EHCI Host Controller [ 0.729677] ehci-pci 0000:00:1d.0: new USB bus registered, assigned bus number 2 [ 0.729916] ehci-pci 0000:00:1d.0: debug port 2 [ 0.734056] ehci-pci 0000:00:1d.0: irq 23, io mem 0xa2b11000 [ 0.740564] ehci-pci 0000:00:1d.0: USB 2.0 started, EHCI 1.00 [ 0.740805] usb usb2: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 6.01 [ 0.740977] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 0.741144] usb usb2: Product: EHCI Host Controller [ 0.741283] usb usb2: Manufacturer: Linux 6.1.95+ ehci_hcd [ 0.741423] usb usb2: SerialNumber: 0000:00:1d.0 [ 0.741697] hub 2-0:1.0: USB hub found [ 0.741842] hub 2-0:1.0: 2 ports detected [ 0.742210] xen: registering gsi 16 triggering 0 polarity 1 [ 0.742214] Already setup the GSI :16 [ 0.742443] xhci_hcd 0000:00:14.0: xHCI Host Controller [ 0.742668] xhci_hcd 0000:00:14.0: new USB bus registered, assigned bus number 3 [ 0.743905] xhci_hcd 0000:00:14.0: hcc params 0x200077c1 hci version 0x100 quirks 0x0000000000009810 [ 0.744325] xhci_hcd 0000:00:14.0: xHCI Host Controller [ 0.744550] xhci_hcd 0000:00:14.0: new USB bus registered, assigned bus number 4 [ 0.744726] xhci_hcd 0000:00:14.0: Host supports USB 3.0 SuperSpeed [ 0.744931] usb usb3: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 6.01 [ 0.745106] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 0.745279] usb usb3: Product: xHCI Host Controller [ 0.745454] usb usb3: Manufacturer: Linux 6.1.95+ xhci-hcd [ 0.745604] usb usb3: SerialNumber: 0000:00:14.0 [ 0.745974] hub 3-0:1.0: USB hub found [ 0.746130] hub 3-0:1.0: 10 ports detected [ 0.749466] usb usb4: New USB device found, idVendor=1d6b, idProduct=0003, bcdDevice= 6.01 [ 0.749653] usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 0.749825] usb usb4: Product: xHCI Host Controller [ 0.749966] usb usb4: Manufacturer: Linux 6.1.95+ xhci-hcd [ 0.750141] usb usb4: SerialNumber: 0000:00:14.0 [ 0.750443] hub 4-0:1.0: USB hub found [ 0.750610] hub 4-0:1.0: 2 ports detected [ 0.751150] usbcore: registered new interface driver usblp [ 0.751303] usbcore: registered new interface driver usb-storage [ 0.751466] i8042: PNP: No PS/2 controller found. [ 0.751743] rtc_cmos 00:02: RTC can wake from S4 [ 0.752297] rtc_cmos 00:02: registered as rtc0 [ 0.752478] rtc_cmos 00:02: alarms up to one month, 242 bytes nvram [ 0.752673] device-mapper: uevent: version 1.0.3 [ 0.752746] xen: registering gsi 18 triggering 0 polarity 1 [ 0.752815] Already setup the GSI :18 [ 0.752881] device-mapper: ioctl: 4.47.0-ioctl (2022-07-28) initialised: dm-devel@redhat.com [ 0.753060] i801_smbus 0000:00:1f.3: SMBus using PCI interrupt [ 0.753160] intel_pstate: CPU model not supported [ 0.753442] hid: raw HID events driver (C) Jiri Kosina [ 0.753681] usbcore: registered new interface driver usbhid [ 0.753823] usbhid: USB HID core driver [ 0.754221] Initializing XFRM netlink socket [ 0.754451] NET: Registered PF_INET6 protocol family [ 0.754911] Segment Routing with IPv6 [ 0.755051] In-situ OAM (IOAM) with IPv6 [ 0.755207] sit: IPv6, IPv4 and MPLS over IPv4 tunneling driver [ 0.755423] NET: Registered PF_PACKET protocol family [ 0.755604] 9pnet: Installing 9P2000 support [ 0.755751] Key type dns_resolver registered [ 0.756092] IPI shorthand broadcast: enabled [ 0.756286] sched_clock: Marking stable (705532003, 50505514)->(774426738, -18389221) [ 0.756711] registered taskstats version 1 [ 0.756842] Loading compiled-in X.509 certificates [ 0.757824] i2c i2c-0: 1/4 memory slots populated (from DMI) [ 0.758453] PM: Magic number: 12:314:669 [ 0.758489] i2c i2c-0: Successfully instantiated SPD at 0x51 [ 0.758752] printk: console [netcon0] enabled [ 0.758892] netconsole: network logging started [ 0.759212] cfg80211: Loading compiled-in X.509 certificates for regulatory database [ 0.767565] cfg80211: Loaded X.509 cert 'sforshee: 00b28ddf47aef9cea7' [ 0.767871] cfg80211: Loaded X.509 cert 'wens: 61c038651aabdcf94bd0ac7ff06c7248db18c600' [ 0.768426] cfg80211: loaded regulatory.db is malformed or signature is missing/invalid [ 0.768629] ALSA device list: [ 0.768806] No soundcards found. [ 0.939823] ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300) [ 0.967554] usb 1-1: new high-speed USB device number 2 using ehci-pci [ 0.983554] usb 2-1: new high-speed USB device number 2 using ehci-pci [ 0.991432] ata1.00: ATA-8: TOSHIBA MG03ACA100, FL1D, max UDMA/100 [ 0.991534] usb 3-9: new high-speed USB device number 2 using xhci_hcd [ 0.992212] ata1.00: 1953525168 sectors, multi 16: LBA48 NCQ (depth 32), AA [ 0.993442] ata1.00: configured for UDMA/100 [ 0.993762] scsi 0:0:0:0: Direct-Access ATA TOSHIBA MG03ACA1 FL1D PQ: 0 ANSI: 5 [ 0.994813] sd 0:0:0:0: Attached scsi generic sg0 type 0 [ 0.994890] sd 0:0:0:0: [sda] 1953525168 512-byte logical blocks: (1.00 TB/932 GiB) [ 0.995149] sd 0:0:0:0: [sda] Write Protect is off [ 0.995295] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00 [ 0.995335] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 0.995573] sd 0:0:0:0: [sda] Preferred minimum I/O size 512 bytes [ 1.095948] usb 1-1: New USB device found, idVendor=8087, idProduct=8008, bcdDevice= 0.05 [ 1.096156] usb 1-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0 [ 1.096625] hub 1-1:1.0: USB hub found [ 1.096914] hub 1-1:1.0: 4 ports detected [ 1.120584] usb 3-9: New USB device found, idVendor=0624, idProduct=0248, bcdDevice= 0.00 [ 1.120758] usb 3-9: New USB device strings: Mfr=1, Product=2, SerialNumber=3 [ 1.120929] usb 3-9: Product: Gadget USB HUB [ 1.121056] usb 3-9: Manufacturer: no manufacturer [ 1.121183] usb 3-9: SerialNumber: 0123456789 [ 1.121933] usb 2-1: New USB device found, idVendor=8087, idProduct=8000, bcdDevice= 0.05 [ 1.122103] usb 2-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0 [ 1.122377] hub 3-9:1.0: USB hub found [ 1.122658] hub 3-9:1.0: 6 ports detected [ 1.122840] hub 2-1:1.0: USB hub found [ 1.123060] hub 2-1:1.0: 6 ports detected [ 1.181251] sda: sda1 sda2 < sda5 > [ 1.181708] sd 0:0:0:0: [sda] Attached SCSI disk [ 1.299766] ata5: SATA link up 1.5 Gbps (SStatus 113 SControl 300) [ 1.302638] ata5.00: ATAPI: HL-DT-ST DVD+/-RW GTA0N, A3B0, max UDMA/100 [ 1.307431] ata5.00: configured for UDMA/100 [ 1.312583] scsi 4:0:0:0: CD-ROM HL-DT-ST DVD+-RW GTA0N A3B0 PQ: 0 ANSI: 5 [ 1.353089] sr 4:0:0:0: [sr0] scsi3-mmc drive: 24x/24x writer dvd-ram cd/rw xa/form2 cdda tray [ 1.353271] cdrom: Uniform CD-ROM driver Revision: 3.20 [ 1.372973] sr 4:0:0:0: Attached scsi CD-ROM sr0 [ 1.373064] sr 4:0:0:0: Attached scsi generic sg1 type 5 [ 1.415570] usb 3-9.1: new high-speed USB device number 3 using xhci_hcd [ 1.502739] usb 3-9.1: New USB device found, idVendor=0624, idProduct=0249, bcdDevice= 0.00 [ 1.502920] usb 3-9.1: New USB device strings: Mfr=4, Product=5, SerialNumber=6 [ 1.503094] usb 3-9.1: Product: Keyboard/Mouse Function [ 1.503233] usb 3-9.1: Manufacturer: Avocent [ 1.503371] usb 3-9.1: SerialNumber: 20120917 [ 1.510483] input: Avocent Keyboard/Mouse Function as /devices/pci0000:00/0000:00:14.0/usb3/3-9/3-9.1/3-9.1:1.0/0003:0624:0249.0001/input/input1 [ 1.562755] hid-generic 0003:0624:0249.0001: input,hidraw0: USB HID v1.00 Keyboard [Avocent Keyboard/Mouse Function] on usb-0000:00:14.0-9.1/input0 [ 1.563846] input: Avocent Keyboard/Mouse Function as /devices/pci0000:00/0000:00:14.0/usb3/3-9/3-9.1/3-9.1:1.1/0003:0624:0249.0002/input/input2 [ 1.564167] hid-generic 0003:0624:0249.0002: input,hidraw1: USB HID v1.00 Mouse [Avocent Keyboard/Mouse Function] on usb-0000:00:14.0-9.1/input1 [ 1.565039] input: Avocent Keyboard/Mouse Function as /devices/pci0000:00/0000:00:14.0/usb3/3-9/3-9.1/3-9.1:1.2/0003:0624:0249.0003/input/input3 [ 1.565339] hid-generic 0003:0624:0249.0003: input,hidraw2: USB HID v1.00 Mouse [Avocent Keyboard/Mouse Function] on usb-0000:00:14.0-9.1/input2 [ 1.683814] ata6: SATA link down (SStatus 0 SControl 300) [ 1.684709] Freeing unused kernel image (initmem) memory: 1576K [ 1.684858] Write protecting the kernel read-only data: 22528k [ 1.697398] Freeing unused kernel image (text/rodata gap) memory: 2032K [ 1.698310] Freeing unused kernel image (rodata/data gap) memory: 1568K [ 1.892021] x86/mm: Checked W+X mappings: passed, no W+X pages found. [ 1.892173] Run /init as init process [ 1.892309] with arguments: [ 1.892309] /init [ 1.892310] placeholder [ 1.892311] with environment: [ 1.892312] HOME=/ [ 1.892312] TERM=linux [ 2.118674] tg3 0000:01:00.1 enx549f3505fd5a: renamed from eth1 [ 2.132103] tg3 0000:01:00.0 enx549f3505fd58: renamed from eth0 [ 2.780631] EXT4-fs (dm-0): mounting ext3 file system using the ext4 subsystem [ 2.785166] EXT4-fs (dm-0): mounted filesystem with ordered data mode. Quota mode: none. [ 6.388646] EXT4-fs (dm-0): re-mounted. Quota mode: none. [ 7.492217] EXT4-fs (sda1): mounting ext3 file system using the ext4 subsystem [ 7.497203] EXT4-fs (sda1): mounted filesystem with ordered data mode. Quota mode: none. [ 7.563179] Adding 1949692k swap on /dev/mapper/godello0--vg-swap_1. Priority:-2 extents:1 across:1949692k [ 9.058457] xenbr0: port 1(enx549f3505fd58) entered blocking state [ 9.058682] xenbr0: port 1(enx549f3505fd58) entered disabled state [ 9.058863] device enx549f3505fd58 entered promiscuous mode [ 12.746109] tg3 0000:01:00.0 enx549f3505fd58: Link is up at 1000 Mbps, full duplex [ 12.746321] tg3 0000:01:00.0 enx549f3505fd58: Flow control is off for TX and off for RX [ 12.746496] tg3 0000:01:00.0 enx549f3505fd58: EEE is disabled [ 12.746716] IPv6: ADDRCONF(NETDEV_CHANGE): enx549f3505fd58: link becomes ready [ 12.746910] xenbr0: port 1(enx549f3505fd58) entered blocking state [ 12.747055] xenbr0: port 1(enx549f3505fd58) entered forwarding state [ 12.747229] IPv6: ADDRCONF(NETDEV_CHANGE): xenbr0: link becomes ready