[ 0.000000] microcode: microcode updated early to revision 0x42e, date = 2019-03-14 [ 0.000000] Linux version 6.1.0-21-amd64 (debian-kernel@lists.debian.org) (gcc-12 (Debian 12.2.0-14) 12.2.0, GNU ld (GNU Binutils for Debian) 2.40) #1 SMP PREEMPT_DYNAMIC Debian 6.1.90-1 (2024-05-03) [ 0.000000] Command line: BOOT_IMAGE=/vmlinuz-6.1.0-21-amd64 root=/dev/mapper/fiano0--vg-root ro console=ttyS0,115200n8 [ 0.000000] BIOS-provided physical RAM map: [ 0.000000] BIOS-e820: [mem 0x0000000000000000-0x000000000009abff] usable [ 0.000000] BIOS-e820: [mem 0x000000000009ac00-0x000000000009ffff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000000e0000-0x00000000000fffff] reserved [ 0.000000] BIOS-e820: [mem 0x0000000000100000-0x000000007de2bfff] usable [ 0.000000] BIOS-e820: [mem 0x000000007de2c000-0x000000007debafff] reserved [ 0.000000] BIOS-e820: [mem 0x000000007debb000-0x000000007dfc3fff] ACPI data [ 0.000000] BIOS-e820: [mem 0x000000007dfc4000-0x000000007e1e0fff] ACPI NVS [ 0.000000] BIOS-e820: [mem 0x000000007e1e1000-0x000000007f36afff] reserved [ 0.000000] BIOS-e820: [mem 0x000000007f36b000-0x000000007f7fffff] ACPI NVS [ 0.000000] BIOS-e820: [mem 0x0000000080000000-0x000000008fffffff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000fed1c000-0x00000000fed3ffff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000ff000000-0x00000000ffffffff] reserved [ 0.000000] BIOS-e820: [mem 0x0000000100000000-0x000000027fffffff] usable [ 0.000000] NX (Execute Disable) protection: active [ 0.000000] SMBIOS 2.7 present. [ 0.000000] DMI: Supermicro X9DBL-3F/X9DBL-iF/X9DBL-3F/X9DBL-iF, BIOS 3.00 12/06/2013 [ 0.000000] tsc: Fast TSC calibration using PIT [ 0.000000] tsc: Detected 1799.985 MHz processor [ 0.000874] e820: update [mem 0x00000000-0x00000fff] usable ==> reserved [ 0.000878] e820: remove [mem 0x000a0000-0x000fffff] usable [ 0.000888] last_pfn = 0x280000 max_arch_pfn = 0x400000000 [ 0.001028] x86/PAT: Configuration [0-7]: WB WC UC- UC WB WP UC- WT [ 0.001678] e820: update [mem 0x80000000-0xffffffff] usable ==> reserved [ 0.001688] last_pfn = 0x7de2c max_arch_pfn = 0x400000000 [ 0.018711] found SMP MP-table at [mem 0x000fd8e0-0x000fd8ef] [ 0.018737] Using GB pages for direct mapping [ 0.019133] RAMDISK: [mem 0x3329b000-0x35944fff] [ 0.019142] ACPI: Early table checksum verification disabled [ 0.019146] ACPI: RSDP 0x00000000000F04A0 000024 (v02 SUPERM) [ 0.019152] ACPI: XSDT 0x000000007DEF1088 00008C (v01 SUPERM SMCI--MB 00000001 AMI 00010013) [ 0.019161] ACPI: FACP 0x000000007DEFBAB0 0000F4 (v04 SUPERM SMCI--MB 00000001 AMI 00010013) [ 0.019169] ACPI: DSDT 0x000000007DEF11A0 00A910 (v02 SUPERM SMCI--MB 00000000 INTL 20091112) [ 0.019175] ACPI: FACS 0x000000007E1D8080 000040 [ 0.019179] ACPI: APIC 0x000000007DEFBBA8 000090 (v03 00000001 AMI 00010013) [ 0.019185] ACPI: FPDT 0x000000007DEFBC38 000044 (v01 00000001 AMI 00010013) [ 0.019190] ACPI: HPET 0x000000007DEFBC80 000038 (v01 SUPERM SMCI--MB 00000001 AMI. 00000005) [ 0.019195] ACPI: PRAD 0x000000007DEFBCB8 0000BE (v02 PRADID PRADTID 00000001 MSFT 04000000) [ 0.019200] ACPI: SPMI 0x000000007DEFBD78 000040 (v05 A M I OEMSPMI 00000000 AMI. 00000000) [ 0.019205] ACPI: SSDT 0x000000007DEFBDB8 0C7AE8 (v02 INTEL CpuPm 00004000 INTL 20091112) [ 0.019210] ACPI: EINJ 0x000000007DFC38A0 000130 (v01 AMI AMI EINJ 00000000 00000000) [ 0.019215] ACPI: ERST 0x000000007DFC39D0 000230 (v01 AMIER AMI ERST 00000000 00000000) [ 0.019220] ACPI: HEST 0x000000007DFC3C00 0000A8 (v01 AMI AMI HEST 00000000 00000000) [ 0.019225] ACPI: BERT 0x000000007DFC3CA8 000030 (v01 AMI AMI BERT 00000000 00000000) [ 0.019230] ACPI: DMAR 0x000000007DFC3CD8 0000B4 (v01 A M I OEMDMAR 00000001 INTL 00000001) [ 0.019235] ACPI: MCFG 0x000000007DFC3D90 00003C (v01 SUPERM SMCI--MB 00000001 MSFT 00000097) [ 0.019239] ACPI: Reserving FACP table memory at [mem 0x7defbab0-0x7defbba3] [ 0.019242] ACPI: Reserving DSDT table memory at [mem 0x7def11a0-0x7defbaaf] [ 0.019243] ACPI: Reserving FACS table memory at [mem 0x7e1d8080-0x7e1d80bf] [ 0.019245] ACPI: Reserving APIC table memory at [mem 0x7defbba8-0x7defbc37] [ 0.019246] ACPI: Reserving FPDT table memory at [mem 0x7defbc38-0x7defbc7b] [ 0.019247] ACPI: Reserving HPET table memory at [mem 0x7defbc80-0x7defbcb7] [ 0.019249] ACPI: Reserving PRAD table memory at [mem 0x7defbcb8-0x7defbd75] [ 0.019250] ACPI: Reserving SPMI table memory at [mem 0x7defbd78-0x7defbdb7] [ 0.019252] ACPI: Reserving SSDT table memory at [mem 0x7defbdb8-0x7dfc389f] [ 0.019253] ACPI: Reserving EINJ table memory at [mem 0x7dfc38a0-0x7dfc39cf] [ 0.019254] ACPI: Reserving ERST table memory at [mem 0x7dfc39d0-0x7dfc3bff] [ 0.019256] ACPI: Reserving HEST table memory at [mem 0x7dfc3c00-0x7dfc3ca7] [ 0.019257] ACPI: Reserving BERT table memory at [mem 0x7dfc3ca8-0x7dfc3cd7] [ 0.019258] ACPI: Reserving DMAR table memory at [mem 0x7dfc3cd8-0x7dfc3d8b] [ 0.019260] ACPI: Reserving MCFG table memory at [mem 0x7dfc3d90-0x7dfc3dcb] [ 0.019330] No NUMA configuration found [ 0.019332] Faking a node at [mem 0x0000000000000000-0x000000027fffffff] [ 0.019348] NODE_DATA(0) allocated [mem 0x27ffd3000-0x27fffdfff] [ 0.019817] Zone ranges: [ 0.019818] DMA [mem 0x0000000000001000-0x0000000000ffffff] [ 0.019821] DMA32 [mem 0x0000000001000000-0x00000000ffffffff] [ 0.019823] Normal [mem 0x0000000100000000-0x000000027fffffff] [ 0.019825] Device empty [ 0.019827] Movable zone start for each node [ 0.019831] Early memory node ranges [ 0.019832] node 0: [mem 0x0000000000001000-0x0000000000099fff] [ 0.019834] node 0: [mem 0x0000000000100000-0x000000007de2bfff] [ 0.019836] node 0: [mem 0x0000000100000000-0x000000027fffffff] [ 0.019840] Initmem setup node 0 [mem 0x0000000000001000-0x000000027fffffff] [ 0.019848] On node 0, zone DMA: 1 pages in unavailable ranges [ 0.019903] On node 0, zone DMA: 102 pages in unavailable ranges [ 0.028016] On node 0, zone Normal: 8660 pages in unavailable ranges [ 0.028312] ACPI: PM-Timer IO Port: 0x408 [ 0.028324] ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1]) [ 0.028326] ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1]) [ 0.028328] ACPI: LAPIC_NMI (acpi_id[0x02] high edge lint[0x1]) [ 0.028329] ACPI: LAPIC_NMI (acpi_id[0x03] high edge lint[0x1]) [ 0.028342] IOAPIC[0]: apic_id 0, version 32, address 0xfec00000, GSI 0-23 [ 0.028348] IOAPIC[1]: apic_id 2, version 32, address 0xfec01000, GSI 24-47 [ 0.028352] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl) [ 0.028355] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level) [ 0.028361] ACPI: Using ACPI (MADT) for SMP configuration information [ 0.028363] ACPI: HPET id: 0x8086a701 base: 0xfed00000 [ 0.028370] TSC deadline timer available [ 0.028371] smpboot: Allowing 4 CPUs, 0 hotplug CPUs [ 0.028393] PM: hibernation: Registered nosave memory: [mem 0x00000000-0x00000fff] [ 0.028396] PM: hibernation: Registered nosave memory: [mem 0x0009a000-0x0009afff] [ 0.028398] PM: hibernation: Registered nosave memory: [mem 0x0009b000-0x0009ffff] [ 0.028399] PM: hibernation: Registered nosave memory: [mem 0x000a0000-0x000dffff] [ 0.028400] PM: hibernation: Registered nosave memory: [mem 0x000e0000-0x000fffff] [ 0.028403] PM: hibernation: Registered nosave memory: [mem 0x7de2c000-0x7debafff] [ 0.028404] PM: hibernation: Registered nosave memory: [mem 0x7debb000-0x7dfc3fff] [ 0.028405] PM: hibernation: Registered nosave memory: [mem 0x7dfc4000-0x7e1e0fff] [ 0.028407] PM: hibernation: Registered nosave memory: [mem 0x7e1e1000-0x7f36afff] [ 0.028408] PM: hibernation: Registered nosave memory: [mem 0x7f36b000-0x7f7fffff] [ 0.028409] PM: hibernation: Registered nosave memory: [mem 0x7f800000-0x7fffffff] [ 0.028410] PM: hibernation: Registered nosave memory: [mem 0x80000000-0x8fffffff] [ 0.028411] PM: hibernation: Registered nosave memory: [mem 0x90000000-0xfed1bfff] [ 0.028413] PM: hibernation: Registered nosave memory: [mem 0xfed1c000-0xfed3ffff] [ 0.028414] PM: hibernation: Registered nosave memory: [mem 0xfed40000-0xfeffffff] [ 0.028415] PM: hibernation: Registered nosave memory: [mem 0xff000000-0xffffffff] [ 0.028418] [mem 0x90000000-0xfed1bfff] available for PCI devices [ 0.028419] Booting paravirtualized kernel on bare hardware [ 0.028423] clocksource: refined-jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645519600211568 ns [ 0.035856] setup_percpu: NR_CPUS:8192 nr_cpumask_bits:4 nr_cpu_ids:4 nr_node_ids:1 [ 0.036253] percpu: Embedded 61 pages/cpu s212992 r8192 d28672 u524288 [ 0.036262] pcpu-alloc: s212992 r8192 d28672 u524288 alloc=1*2097152 [ 0.036266] pcpu-alloc: [0] 0 1 2 3 [ 0.036308] Fallback order for Node 0: 0 [ 0.036312] Built 1 zonelists, mobility grouping on. Total pages: 2055603 [ 0.036315] Policy zone: Normal [ 0.036316] Kernel command line: BOOT_IMAGE=/vmlinuz-6.1.0-21-amd64 root=/dev/mapper/fiano0--vg-root ro console=ttyS0,115200n8 [ 0.036387] Unknown kernel command line parameters "BOOT_IMAGE=/vmlinuz-6.1.0-21-amd64", will be passed to user space. [ 0.036401] random: crng init done [ 0.037451] Dentry cache hash table entries: 1048576 (order: 11, 8388608 bytes, linear) [ 0.038020] Inode-cache hash table entries: 524288 (order: 10, 4194304 bytes, linear) [ 0.038110] mem auto-init: stack:all(zero), heap alloc:on, heap free:off [ 0.038123] software IO TLB: area num 4. [ 0.079225] Memory: 2033856K/8353556K available (14342K kernel code, 2332K rwdata, 9060K rodata, 2796K init, 17404K bss, 304412K reserved, 0K cma-reserved) [ 0.079438] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1 [ 0.079459] Kernel/User page tables isolation: enabled [ 0.079513] ftrace: allocating 40220 entries in 158 pages [ 0.089862] ftrace: allocated 158 pages with 5 groups [ 0.090813] Dynamic Preempt: voluntary [ 0.090857] rcu: Preemptible hierarchical RCU implementation. [ 0.090858] rcu: RCU restricting CPUs from NR_CPUS=8192 to nr_cpu_ids=4. [ 0.090860] Trampoline variant of Tasks RCU enabled. [ 0.090861] Rude variant of Tasks RCU enabled. [ 0.090862] Tracing variant of Tasks RCU enabled. [ 0.090863] rcu: RCU calculated value of scheduler-enlistment delay is 25 jiffies. [ 0.090864] rcu: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=4 [ 0.098216] NR_IRQS: 524544, nr_irqs: 864, preallocated irqs: 16 [ 0.098416] rcu: srcu_init: Setting srcu_struct sizes based on contention. [ 0.102929] Console: colour VGA+ 80x25 [ 1.027324] printk: console [ttyS0] enabled [ 1.031531] ACPI: Core revision 20220331 [ 1.036182] clocksource: hpet: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 133484882848 ns [ 1.045320] APIC: Switch to symmetric I/O mode setup [ 1.050302] DMAR: Host address width 46 [ 1.054149] DMAR: DRHD base: 0x000000fbffc000 flags: 0x1 [ 1.059477] DMAR: dmar0: reg_base_addr fbffc000 ver 1:0 cap d2078c106f0466 ecap f020de [ 1.067398] DMAR: RMRR base: 0x0000007de91000 end: 0x0000007de9dfff [ 1.073666] DMAR: ATSR flags: 0x0 [ 1.076985] DMAR: RHSA base: 0x000000fbffc000 proximity domain: 0x0 [ 1.083261] DMAR-IR: IOAPIC id 0 under DRHD base 0xfbffc000 IOMMU 0 [ 1.089619] DMAR-IR: IOAPIC id 2 under DRHD base 0xfbffc000 IOMMU 0 [ 1.095974] DMAR-IR: HPET id 0 under DRHD base 0xfbffc000 [ 1.101381] DMAR-IR: Queued invalidation will be enabled to support x2apic and Intr-remapping. [ 1.110513] DMAR-IR: Enabled IRQ remapping in x2apic mode [ 1.115909] x2apic enabled [ 1.118636] Switched APIC routing to cluster x2apic. [ 1.124145] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1 [ 1.149320] clocksource: tsc-early: mask: 0xffffffffffffffff max_cycles: 0x19f21b858bc, max_idle_ns: 440795281592 ns [ 1.159837] Calibrating delay loop (skipped), value calculated using timer frequency.. 3599.97 BogoMIPS (lpj=7199940) [ 1.163868] CPU0: Thermal monitoring enabled (TM1) [ 1.167920] process: using mwait in idle threads [ 1.171838] Last level iTLB entries: 4KB 512, 2MB 8, 4MB 8 [ 1.175835] Last level dTLB entries: 4KB 512, 2MB 0, 4MB 0, 1GB 4 [ 1.179837] Spectre V1 : Mitigation: usercopy/swapgs barriers and __user pointer sanitization [ 1.183836] Spectre V2 : Mitigation: Retpolines [ 1.187835] Spectre V2 : Spectre v2 / SpectreRSB mitigation: Filling RSB on context switch [ 1.191835] Spectre V2 : Spectre v2 / SpectreRSB : Filling RSB on VMEXIT [ 1.195835] Spectre V2 : Enabling Restricted Speculation for firmware calls [ 1.199836] Spectre V2 : mitigation: Enabling conditional Indirect Branch Prediction Barrier [ 1.203836] Speculative Store Bypass: Mitigation: Speculative Store Bypass disabled via prctl [ 1.207835] MDS: Mitigation: Clear CPU buffers [ 1.211835] MMIO Stale Data: Unknown: No mitigations [ 1.215840] x86/fpu: Supporting XSAVE feature 0x001: 'x87 floating point registers' [ 1.219835] x86/fpu: Supporting XSAVE feature 0x002: 'SSE registers' [ 1.223835] x86/fpu: Supporting XSAVE feature 0x004: 'AVX registers' [ 1.227835] x86/fpu: xstate_offset[2]: 576, xstate_sizes[2]: 256 [ 1.231835] x86/fpu: Enabled xstate features 0x7, context size is 832 bytes, using 'standard' format. [ 1.260652] Freeing SMP alternatives memory: 36K [ 1.263836] pid_max: default: 32768 minimum: 301 [ 1.267869] LSM: Security Framework initializing [ 1.271854] landlock: Up and running. [ 1.275835] Yama: disabled by default; enable with sysctl kernel.yama.* [ 1.279867] AppArmor: AppArmor initialized [ 1.283837] TOMOYO Linux initialized [ 1.287842] LSM support for eBPF active [ 1.291882] Mount-cache hash table entries: 16384 (order: 5, 131072 bytes, linear) [ 1.295851] Mountpoint-cache hash table entries: 16384 (order: 5, 131072 bytes, linear) [ 1.300465] smpboot: CPU0: Intel(R) Xeon(R) CPU E5-2403 v2 @ 1.80GHz (family: 0x6, model: 0x3e, stepping: 0x4) [ 1.304025] cblist_init_generic: Setting adjustable number of callback queues. [ 1.307836] cblist_init_generic: Setting shift to 2 and lim to 1. [ 1.311867] cblist_init_generic: Setting adjustable number of callback queues. [ 1.315835] cblist_init_generic: Setting shift to 2 and lim to 1. [ 1.319857] cblist_init_generic: Setting adjustable number of callback queues. [ 1.323835] cblist_init_generic: Setting shift to 2 and lim to 1. [ 1.327857] Performance Events: PEBS fmt1+, IvyBridge events, 16-deep LBR, full-width counters, Intel PMU driver. [ 1.331837] ... version: 3 [ 1.335835] ... bit width: 48 [ 1.339835] ... generic registers: 8 [ 1.343835] ... value mask: 0000ffffffffffff [ 1.347835] ... max period: 00007fffffffffff [ 1.351835] ... fixed-purpose events: 3 [ 1.355835] ... event mask: 00000007000000ff [ 1.360068] signal: max sigframe size: 1776 [ 1.363860] Estimated ratio of average max frequency by base frequency (times 1024): 1024 [ 1.367867] rcu: Hierarchical SRCU implementation. [ 1.371835] rcu: Max phase no-delay instances is 1000. [ 1.376510] NMI watchdog: Enabled. Permanently consumes one hw-PMU counter. [ 1.379931] smp: Bringing up secondary CPUs ... [ 1.383983] x86: Booting SMP configuration: [ 1.387840] .... node #0, CPUs: #1 #2 #3 [ 1.402989] smp: Brought up 1 node, 4 CPUs [ 1.407836] smpboot: Max logical packages: 1 [ 1.411835] smpboot: Total of 4 processors activated (14399.88 BogoMIPS) [ 1.436162] node 0 deferred pages initialised in 20ms [ 1.440271] devtmpfs: initialized [ 1.443917] x86/mm: Memory block size: 128MB [ 1.448887] ACPI: PM: Registering ACPI NVS region [mem 0x7dfc4000-0x7e1e0fff] (2215936 bytes) [ 1.451887] ACPI: PM: Registering ACPI NVS region [mem 0x7f36b000-0x7f7fffff] (4804608 bytes) [ 1.455991] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645041785100000 ns [ 1.459848] futex hash table entries: 1024 (order: 4, 65536 bytes, linear) [ 1.463897] pinctrl core: initialized pinctrl subsystem [ 1.468717] NET: Registered PF_NETLINK/PF_ROUTE protocol family [ 1.472118] DMA: preallocated 1024 KiB GFP_KERNEL pool for atomic allocations [ 1.475994] DMA: preallocated 1024 KiB GFP_KERNEL|GFP_DMA pool for atomic allocations [ 1.479993] DMA: preallocated 1024 KiB GFP_KERNEL|GFP_DMA32 pool for atomic allocations [ 1.483845] audit: initializing netlink subsys (disabled) [ 1.487850] audit: type=2000 audit(1719061540.400:1): state=initialized audit_enabled=0 res=1 [ 1.487986] thermal_sys: Registered thermal governor 'fair_share' [ 1.491839] thermal_sys: Registered thermal governor 'bang_bang' [ 1.495836] thermal_sys: Registered thermal governor 'step_wise' [ 1.499835] thermal_sys: Registered thermal governor 'user_space' [ 1.503835] thermal_sys: Registered thermal governor 'power_allocator' [ 1.507853] cpuidle: using governor ladder [ 1.515840] cpuidle: using governor menu [ 1.519812] ACPI FADT declares the system doesn't support PCIe ASPM, so disable it [ 1.519837] acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5 [ 1.523941] PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0x80000000-0x8fffffff] (base 0x80000000) [ 1.527838] PCI: MMCONFIG at [mem 0x80000000-0x8fffffff] reserved in E820 [ 1.531845] pmd_set_huge: Cannot satisfy [mem 0x80000000-0x80200000] with a huge-page mapping due to MTRR override. [ 1.536257] PCI: Using configuration type 1 for base access [ 1.539933] core: PMU erratum BJ122, BV98, HSD29 workaround disabled, HT off [ 1.545176] kprobes: kprobe jump-optimization is enabled. All kprobes are optimized if possible. [ 1.547883] HugeTLB: registered 1.00 GiB page size, pre-allocated 0 pages [ 1.551838] HugeTLB: 16380 KiB vmemmap can be freed for a 1.00 GiB page [ 1.559836] HugeTLB: registered 2.00 MiB page size, pre-allocated 0 pages [ 1.567835] HugeTLB: 28 KiB vmemmap can be freed for a 2.00 MiB page [ 1.571993] ACPI: Added _OSI(Module Device) [ 1.575838] ACPI: Added _OSI(Processor Device) [ 1.579836] ACPI: Added _OSI(3.0 _SCP Extensions) [ 1.587836] ACPI: Added _OSI(Processor Aggregator Device) [ 1.706996] ACPI: 2 ACPI AML tables successfully acquired and loaded [ 1.737422] ACPI: Interpreter enabled [ 1.739858] ACPI: PM: (supports S0 S1 S4 S5) [ 1.743836] ACPI: Using IOAPIC for interrupt routing [ 1.751944] HEST: Table parsing has been initialized. [ 1.755958] GHES: APEI firmware first mode is enabled by WHEA _OSC. [ 1.759840] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug [ 1.771835] PCI: Using E820 reservations for host bridge windows [ 1.776389] ACPI: Enabled 5 GPEs in block 00 to 3F [ 1.783946] ACPI BIOS Error (bug): Could not resolve symbol [\_SB.PRAD], AE_NOT_FOUND (20220331/psargs-330) [ 1.787839] ACPI Error: Aborting method \_GPE._L24 due to previous error (AE_NOT_FOUND) (20220331/psparse-529) [ 1.791844] ACPI Error: AE_NOT_FOUND, while evaluating GPE method [_L24] (20220331/evgpe-511) [ 1.795834] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-fe]) [ 1.799834] acpi PNP0A08:00: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI HPX-Type3] [ 1.807928] acpi PNP0A08:00: _OSC: platform does not support [SHPCHotplug PME AER LTR] [ 1.815990] acpi PNP0A08:00: _OSC: OS now controls [PCIeHotplug PCIeCapability] [ 1.823836] acpi PNP0A08:00: FADT indicates ASPM is unsupported, using BIOS configuration [ 1.832198] PCI host bridge to bus 0000:00 [ 1.835838] pci_bus 0000:00: root bus resource [io 0x0000-0x03af window] [ 1.843836] pci_bus 0000:00: root bus resource [io 0x03e0-0x0cf7 window] [ 1.851835] pci_bus 0000:00: root bus resource [io 0x03b0-0x03df window] [ 1.855835] pci_bus 0000:00: root bus resource [io 0x0d00-0xffff window] [ 1.863836] pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000dffff window] [ 1.871835] pci_bus 0000:00: root bus resource [mem 0xfed08000-0xfed08fff window] [ 1.879835] pci_bus 0000:00: root bus resource [mem 0xfed0e000-0xfed0ffff window] [ 1.887835] pci_bus 0000:00: root bus resource [mem 0x80000000-0xfbffffff window] [ 1.895836] pci_bus 0000:00: root bus resource [bus 00-fe] [ 1.899866] pci 0000:00:00.0: [8086:0e00] type 00 class 0x060000 [ 1.903919] pci 0000:00:00.0: PME# supported from D0 D3hot D3cold [ 1.911961] pci 0000:00:01.0: [8086:0e02] type 01 class 0x060400 [ 1.919936] pci 0000:00:01.0: PME# supported from D0 D3hot D3cold [ 1.924003] pci 0000:00:01.1: [8086:0e03] type 01 class 0x060400 [ 1.931934] pci 0000:00:01.1: PME# supported from D0 D3hot D3cold [ 1.936003] pci 0000:00:03.0: [8086:0e08] type 01 class 0x060400 [ 1.943874] pci 0000:00:03.0: enabling Extended Tags [ 1.947900] pci 0000:00:03.0: PME# supported from D0 D3hot D3cold [ 1.955989] pci 0000:00:04.0: [8086:0e20] type 00 class 0x088000 [ 1.959853] pci 0000:00:04.0: reg 0x10: [mem 0xfbb1c000-0xfbb1ffff 64bit] [ 1.967981] pci 0000:00:04.1: [8086:0e21] type 00 class 0x088000 [ 1.971852] pci 0000:00:04.1: reg 0x10: [mem 0xfbb18000-0xfbb1bfff 64bit] [ 1.979973] pci 0000:00:04.2: [8086:0e22] type 00 class 0x088000 [ 1.987852] pci 0000:00:04.2: reg 0x10: [mem 0xfbb14000-0xfbb17fff 64bit] [ 1.991970] pci 0000:00:04.3: [8086:0e23] type 00 class 0x088000 [ 1.999852] pci 0000:00:04.3: reg 0x10: [mem 0xfbb10000-0xfbb13fff 64bit] [ 2.003972] pci 0000:00:04.4: [8086:0e24] type 00 class 0x088000 [ 2.011852] pci 0000:00:04.4: reg 0x10: [mem 0xfbb0c000-0xfbb0ffff 64bit] [ 2.019970] pci 0000:00:04.5: [8086:0e25] type 00 class 0x088000 [ 2.023851] pci 0000:00:04.5: reg 0x10: [mem 0xfbb08000-0xfbb0bfff 64bit] [ 2.031971] pci 0000:00:04.6: [8086:0e26] type 00 class 0x088000 [ 2.035854] pci 0000:00:04.6: reg 0x10: [mem 0xfbb04000-0xfbb07fff 64bit] [ 2.043971] pci 0000:00:04.7: [8086:0e27] type 00 class 0x088000 [ 2.051852] pci 0000:00:04.7: reg 0x10: [mem 0xfbb00000-0xfbb03fff 64bit] [ 2.055969] pci 0000:00:05.0: [8086:0e28] type 00 class 0x088000 [ 2.063966] pci 0000:00:05.2: [8086:0e2a] type 00 class 0x088000 [ 2.067959] pci 0000:00:05.4: [8086:0e2c] type 00 class 0x080020 [ 2.075847] pci 0000:00:05.4: reg 0x10: [mem 0xfbb25000-0xfbb25fff] [ 2.083986] pci 0000:00:11.0: [8086:1d3e] type 01 class 0x060400 [ 2.087956] pci 0000:00:11.0: PME# supported from D0 D3hot D3cold [ 2.095978] pci 0000:00:16.0: [8086:1d3a] type 00 class 0x078000 [ 2.099854] pci 0000:00:16.0: reg 0x10: [mem 0xfed0e000-0xfed0e00f 64bit] [ 2.107904] pci 0000:00:16.0: PME# supported from D0 D3hot D3cold [ 2.111925] pci 0000:00:16.1: [8086:1d3b] type 00 class 0x078000 [ 2.119853] pci 0000:00:16.1: reg 0x10: [mem 0xfed0f000-0xfed0f00f 64bit] [ 2.127904] pci 0000:00:16.1: PME# supported from D0 D3hot D3cold [ 2.131938] pci 0000:00:1a.0: [8086:1d2d] type 00 class 0x0c0320 [ 2.139852] pci 0000:00:1a.0: reg 0x10: [mem 0xfbb23000-0xfbb233ff] [ 2.143926] pci 0000:00:1a.0: PME# supported from D0 D3hot D3cold [ 2.151941] pci 0000:00:1c.0: [8086:1d10] type 01 class 0x060400 [ 2.155935] pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold [ 2.163866] pci 0000:00:1c.0: Enabling MPC IRBNCE [ 2.167837] pci 0000:00:1c.0: Intel PCH root port ACS workaround enabled [ 2.175953] pci 0000:00:1c.1: [8086:1d12] type 01 class 0x060400 [ 2.179935] pci 0000:00:1c.1: PME# supported from D0 D3hot D3cold [ 2.187862] pci 0000:00:1c.1: Enabling MPC IRBNCE [ 2.191837] pci 0000:00:1c.1: Intel PCH root port ACS workaround enabled [ 2.199953] pci 0000:00:1d.0: [8086:1d26] type 00 class 0x0c0320 [ 2.203852] pci 0000:00:1d.0: reg 0x10: [mem 0xfbb22000-0xfbb223ff] [ 2.211927] pci 0000:00:1d.0: PME# supported from D0 D3hot D3cold [ 2.215939] pci 0000:00:1e.0: [8086:244e] type 01 class 0x060401 [ 2.223987] pci 0000:00:1f.0: [8086:1d41] type 00 class 0x060100 [ 2.228052] pci 0000:00:1f.2: [8086:1d02] type 00 class 0x010601 [ 2.235849] pci 0000:00:1f.2: reg 0x10: [io 0xf050-0xf057] [ 2.239842] pci 0000:00:1f.2: reg 0x14: [io 0xf040-0xf043] [ 2.247842] pci 0000:00:1f.2: reg 0x18: [io 0xf030-0xf037] [ 2.251842] pci 0000:00:1f.2: reg 0x1c: [io 0xf020-0xf023] [ 2.259842] pci 0000:00:1f.2: reg 0x20: [io 0xf000-0xf01f] [ 2.263842] pci 0000:00:1f.2: reg 0x24: [mem 0xfbb21000-0xfbb217ff] [ 2.267880] pci 0000:00:1f.2: PME# supported from D3hot [ 2.275926] pci 0000:00:1f.3: [8086:1d22] type 00 class 0x0c0500 [ 2.279853] pci 0000:00:1f.3: reg 0x10: [mem 0xfbb20000-0xfbb200ff 64bit] [ 2.287859] pci 0000:00:1f.3: reg 0x20: [io 0x1180-0x119f] [ 2.291912] pci 0000:00:1f.6: [8086:1d24] type 00 class 0x118000 [ 2.299856] pci 0000:00:1f.6: reg 0x10: [mem 0xfed08000-0xfed08fff 64bit] [ 2.307999] pci 0000:00:01.0: PCI bridge to [bus 01] [ 2.311887] pci 0000:00:01.1: PCI bridge to [bus 02] [ 2.315886] pci 0000:00:03.0: PCI bridge to [bus 03] [ 2.319919] pci 0000:04:00.0: [8086:1d6b] type 00 class 0x010700 [ 2.327858] pci 0000:04:00.0: reg 0x10: [mem 0xfa47c000-0xfa47ffff 64bit pref] [ 2.335850] pci 0000:04:00.0: reg 0x18: [mem 0xfa000000-0xfa3fffff 64bit pref] [ 2.343844] pci 0000:04:00.0: reg 0x20: [io 0xe000-0xe0ff] [ 2.347861] pci 0000:04:00.0: enabling Extended Tags [ 2.351941] pci 0000:04:00.0: reg 0x164: [mem 0xfa400000-0xfa403fff 64bit pref] [ 2.359836] pci 0000:04:00.0: VF(n) BAR0 space: [mem 0xfa400000-0xfa47bfff 64bit pref] (contains BAR0 for 31 VFs) [ 2.372092] pci 0000:00:11.0: PCI bridge to [bus 04] [ 2.375839] pci 0000:00:11.0: bridge window [io 0xe000-0xefff] [ 2.379843] pci 0000:00:11.0: bridge window [mem 0xfa000000-0xfa4fffff 64bit pref] [ 2.387934] pci 0000:05:00.0: [8086:10d3] type 00 class 0x020000 [ 2.395871] pci 0000:05:00.0: reg 0x10: [mem 0xfba00000-0xfba1ffff] [ 2.399872] pci 0000:05:00.0: reg 0x18: [io 0xd000-0xd01f] [ 2.407854] pci 0000:05:00.0: reg 0x1c: [mem 0xfba20000-0xfba23fff] [ 2.412025] pci 0000:05:00.0: PME# supported from D0 D3hot D3cold [ 2.420057] pci 0000:00:1c.0: PCI bridge to [bus 05] [ 2.423838] pci 0000:00:1c.0: bridge window [io 0xd000-0xdfff] [ 2.431838] pci 0000:00:1c.0: bridge window [mem 0xfba00000-0xfbafffff] [ 2.439937] pci 0000:06:00.0: [8086:10d3] type 00 class 0x020000 [ 2.443871] pci 0000:06:00.0: reg 0x10: [mem 0xfb900000-0xfb91ffff] [ 2.451873] pci 0000:06:00.0: reg 0x18: [io 0xc000-0xc01f] [ 2.455854] pci 0000:06:00.0: reg 0x1c: [mem 0xfb920000-0xfb923fff] [ 2.464022] pci 0000:06:00.0: PME# supported from D0 D3hot D3cold [ 2.468052] pci 0000:00:1c.1: PCI bridge to [bus 06] [ 2.471838] pci 0000:00:1c.1: bridge window [io 0xc000-0xcfff] [ 2.479838] pci 0000:00:1c.1: bridge window [mem 0xfb900000-0xfb9fffff] [ 2.487858] pci_bus 0000:07: extended config space not accessible [ 2.491861] pci 0000:07:01.0: [102b:0532] type 00 class 0x030000 [ 2.499852] pci 0000:07:01.0: reg 0x10: [mem 0xf9000000-0xf9ffffff pref] [ 2.503844] pci 0000:07:01.0: reg 0x14: [mem 0xfb800000-0xfb803fff] [ 2.511844] pci 0000:07:01.0: reg 0x18: [mem 0xfb000000-0xfb7fffff] [ 2.519882] pci 0000:07:01.0: Video device with shadowed ROM at [mem 0x000c0000-0x000dffff] [ 2.527947] pci 0000:00:1e.0: PCI bridge to [bus 07] (subtractive decode) [ 2.531840] pci 0000:00:1e.0: bridge window [mem 0xfb000000-0xfb8fffff] [ 2.539842] pci 0000:00:1e.0: bridge window [mem 0xf9000000-0xf9ffffff 64bit pref] [ 2.547836] pci 0000:00:1e.0: bridge window [io 0x0000-0x03af window] (subtractive decode) [ 2.555835] pci 0000:00:1e.0: bridge window [io 0x03e0-0x0cf7 window] (subtractive decode) [ 2.563835] pci 0000:00:1e.0: bridge window [io 0x03b0-0x03df window] (subtractive decode) [ 2.571835] pci 0000:00:1e.0: bridge window [io 0x0d00-0xffff window] (subtractive decode) [ 2.583835] pci 0000:00:1e.0: bridge window [mem 0x000a0000-0x000dffff window] (subtractive decode) [ 2.591835] pci 0000:00:1e.0: bridge window [mem 0xfed08000-0xfed08fff window] (subtractive decode) [ 2.599835] pci 0000:00:1e.0: bridge window [mem 0xfed0e000-0xfed0ffff window] (subtractive decode) [ 2.607835] pci 0000:00:1e.0: bridge window [mem 0x80000000-0xfbffffff window] (subtractive decode) [ 2.620636] ACPI: PCI Root Bridge [UNC0] (domain 0000 [bus ff]) [ 2.623840] acpi PNP0A03:00: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI HPX-Type3] [ 2.635855] acpi PNP0A03:00: _OSC: OS now controls [PCIeHotplug SHPCHotplug PME AER PCIeCapability LTR] [ 2.643836] acpi PNP0A03:00: FADT indicates ASPM is unsupported, using BIOS configuration [ 2.651903] PCI host bridge to bus 0000:ff [ 2.655837] pci_bus 0000:ff: root bus resource [bus ff] [ 2.659849] pci 0000:ff:08.0: [8086:0e80] type 00 class 0x088000 [ 2.667916] pci 0000:ff:09.0: [8086:0e90] type 00 class 0x088000 [ 2.671905] pci 0000:ff:0a.0: [8086:0ec0] type 00 class 0x088000 [ 2.679896] pci 0000:ff:0a.1: [8086:0ec1] type 00 class 0x088000 [ 2.683895] pci 0000:ff:0a.2: [8086:0ec2] type 00 class 0x088000 [ 2.691898] pci 0000:ff:0a.3: [8086:0ec3] type 00 class 0x088000 [ 2.695902] pci 0000:ff:0b.0: [8086:0e1e] type 00 class 0x088000 [ 2.703893] pci 0000:ff:0b.3: [8086:0e1f] type 00 class 0x088000 [ 2.711894] pci 0000:ff:0c.0: [8086:0ee0] type 00 class 0x088000 [ 2.715893] pci 0000:ff:0c.1: [8086:0ee2] type 00 class 0x088000 [ 2.723896] pci 0000:ff:0d.0: [8086:0ee1] type 00 class 0x088000 [ 2.727893] pci 0000:ff:0d.1: [8086:0ee3] type 00 class 0x088000 [ 2.735896] pci 0000:ff:0e.0: [8086:0ea0] type 00 class 0x088000 [ 2.739898] pci 0000:ff:0e.1: [8086:0e30] type 00 class 0x110100 [ 2.747912] pci 0000:ff:0f.0: [8086:0ea8] type 00 class 0x088000 [ 2.751923] pci 0000:ff:0f.1: [8086:0e71] type 00 class 0x088000 [ 2.759918] pci 0000:ff:0f.2: [8086:0eaa] type 00 class 0x088000 [ 2.763919] pci 0000:ff:0f.3: [8086:0eab] type 00 class 0x088000 [ 2.771917] pci 0000:ff:0f.4: [8086:0eac] type 00 class 0x088000 [ 2.775917] pci 0000:ff:0f.5: [8086:0ead] type 00 class 0x088000 [ 2.783920] pci 0000:ff:10.0: [8086:0eb0] type 00 class 0x088000 [ 2.787919] pci 0000:ff:10.1: [8086:0eb1] type 00 class 0x088000 [ 2.795926] pci 0000:ff:10.2: [8086:0eb2] type 00 class 0x088000 [ 2.799919] pci 0000:ff:10.3: [8086:0eb3] type 00 class 0x088000 [ 2.807918] pci 0000:ff:10.4: [8086:0eb4] type 00 class 0x088000 [ 2.811918] pci 0000:ff:10.5: [8086:0eb5] type 00 class 0x088000 [ 2.819923] pci 0000:ff:10.6: [8086:0eb6] type 00 class 0x088000 [ 2.823918] pci 0000:ff:10.7: [8086:0eb7] type 00 class 0x088000 [ 2.831916] pci 0000:ff:13.0: [8086:0e1d] type 00 class 0x088000 [ 2.835895] pci 0000:ff:13.1: [8086:0e34] type 00 class 0x110100 [ 2.843900] pci 0000:ff:13.4: [8086:0e81] type 00 class 0x088000 [ 2.847896] pci 0000:ff:13.5: [8086:0e36] type 00 class 0x110100 [ 2.855898] pci 0000:ff:16.0: [8086:0ec8] type 00 class 0x088000 [ 2.859894] pci 0000:ff:16.1: [8086:0ec9] type 00 class 0x088000 [ 2.867893] pci 0000:ff:16.2: [8086:0eca] type 00 class 0x088000 [ 2.876056] ACPI: PCI: Interrupt link LNKA configured for IRQ 11 [ 2.879889] ACPI: PCI: Interrupt link LNKB configured for IRQ 10 [ 2.887887] ACPI: PCI: Interrupt link LNKC configured for IRQ 5 [ 2.891887] ACPI: PCI: Interrupt link LNKD configured for IRQ 11 [ 2.899887] ACPI: PCI: Interrupt link LNKE configured for IRQ 0 [ 2.903887] ACPI: PCI: Interrupt link LNKF configured for IRQ 0 [ 2.911905] ACPI: PCI: Interrupt link LNKG configured for IRQ 0 [ 2.915887] ACPI: PCI: Interrupt link LNKH configured for IRQ 7 [ 2.925467] iommu: Default domain type: Translated [ 2.927836] iommu: DMA domain TLB invalidation policy: lazy mode [ 2.935927] pps_core: LinuxPPS API ver. 1 registered [ 2.939836] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti [ 2.947838] PTP clock support registered [ 2.951776] EDAC MC: Ver: 3.0.0 [ 2.956098] NetLabel: Initializing [ 2.959499] NetLabel: domain hash size = 128 [ 2.963837] NetLabel: protocols = UNLABELED CIPSOv4 CALIPSO [ 2.971858] NetLabel: unlabeled traffic allowed by default [ 2.975836] PCI: Using ACPI for IRQ routing [ 2.986837] PCI: pci_cache_line_size set to 64 bytes [ 2.986963] e820: reserve RAM buffer [mem 0x0009ac00-0x0009ffff] [ 2.986966] e820: reserve RAM buffer [mem 0x7de2c000-0x7fffffff] [ 2.987879] pci 0000:07:01.0: vgaarb: setting as boot VGA device [ 2.991834] pci 0000:07:01.0: vgaarb: bridge control possible [ 2.991834] pci 0000:07:01.0: vgaarb: VGA device added: decodes=io+mem,owns=io+mem,locks=none [ 3.007843] vgaarb: loaded [ 3.012352] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0, 0, 0, 0, 0, 0 [ 3.015836] hpet0: 8 comparators, 64-bit 14.318180 MHz counter [ 3.025897] clocksource: Switched to clocksource tsc-early [ 3.029531] VFS: Disk quotas dquot_6.6.0 [ 3.033472] VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes) [ 3.040539] AppArmor: AppArmor Filesystem Enabled [ 3.045277] pnp: PnP ACPI init [ 3.048487] system 00:00: [mem 0xfc000000-0xfcffffff] has been reserved [ 3.055109] system 00:00: [mem 0xfd000000-0xfdffffff] has been reserved [ 3.061724] system 00:00: [mem 0xfe000000-0xfeafffff] has been reserved [ 3.068336] system 00:00: [mem 0xfeb00000-0xfebfffff] has been reserved [ 3.075080] system 00:01: [mem 0xfbffc000-0xfbffdfff] could not be reserved [ 3.082183] system 00:03: [io 0x04d0-0x04d1] has been reserved [ 3.088108] system 00:03: [mem 0x00000400-0x000004ff] could not be reserved [ 3.095390] system 00:06: [io 0x0b00-0x0b7f] has been reserved [ 3.101526] pnp 00:07: [dma 0 disabled] [ 3.101768] pnp 00:08: [dma 0 disabled] [ 3.102049] system 00:09: [io 0x0400-0x0453] has been reserved [ 3.107973] system 00:09: [io 0x0458-0x047f] has been reserved [ 3.113891] system 00:09: [io 0x1180-0x119f] has been reserved [ 3.119810] system 00:09: [io 0x0500-0x057f] has been reserved [ 3.125729] system 00:09: [mem 0xfed1c000-0xfed1ffff] has been reserved [ 3.132342] system 00:09: [mem 0xfec00000-0xfecfffff] could not be reserved [ 3.139302] system 00:09: [mem 0xff000000-0xffffffff] has been reserved [ 3.146019] system 00:0a: [io 0x0454-0x0457] has been reserved [ 3.152217] system 00:0b: [mem 0x00000000-0x0009ffff] could not be reserved [ 3.159452] pnp: PnP ACPI: found 12 devices [ 3.170175] clocksource: acpi_pm: mask: 0xffffff max_cycles: 0xffffff, max_idle_ns: 2085701024 ns [ 3.179149] NET: Registered PF_INET protocol family [ 3.184214] IP idents hash table entries: 131072 (order: 8, 1048576 bytes, linear) [ 3.194549] tcp_listen_portaddr_hash hash table entries: 4096 (order: 4, 65536 bytes, linear) [ 3.203117] Table-perturb hash table entries: 65536 (order: 6, 262144 bytes, linear) [ 3.210946] TCP established hash table entries: 65536 (order: 7, 524288 bytes, linear) [ 3.219250] TCP bind hash table entries: 65536 (order: 9, 2097152 bytes, linear) [ 3.227044] TCP: Hash tables configured (established 65536 bind 65536) [ 3.233669] MPTCP token hash table entries: 8192 (order: 5, 196608 bytes, linear) [ 3.241223] UDP hash table entries: 4096 (order: 5, 131072 bytes, linear) [ 3.248051] UDP-Lite hash table entries: 4096 (order: 5, 131072 bytes, linear) [ 3.255337] NET: Registered PF_UNIX/PF_LOCAL protocol family [ 3.261009] NET: Registered PF_XDP protocol family [ 3.265823] pci 0000:00:01.0: PCI bridge to [bus 01] [ 3.270802] pci 0000:00:01.1: PCI bridge to [bus 02] [ 3.275776] pci 0000:00:03.0: PCI bridge to [bus 03] [ 3.280752] pci 0000:00:11.0: PCI bridge to [bus 04] [ 3.285719] pci 0000:00:11.0: bridge window [io 0xe000-0xefff] [ 3.291818] pci 0000:00:11.0: bridge window [mem 0xfa000000-0xfa4fffff 64bit pref] [ 3.299566] pci 0000:00:1c.0: PCI bridge to [bus 05] [ 3.304537] pci 0000:00:1c.0: bridge window [io 0xd000-0xdfff] [ 3.310628] pci 0000:00:1c.0: bridge window [mem 0xfba00000-0xfbafffff] [ 3.317419] pci 0000:00:1c.1: PCI bridge to [bus 06] [ 3.322387] pci 0000:00:1c.1: bridge window [io 0xc000-0xcfff] [ 3.328482] pci 0000:00:1c.1: bridge window [mem 0xfb900000-0xfb9fffff] [ 3.335274] pci 0000:00:1e.0: PCI bridge to [bus 07] [ 3.340244] pci 0000:00:1e.0: bridge window [mem 0xfb000000-0xfb8fffff] [ 3.347029] pci 0000:00:1e.0: bridge window [mem 0xf9000000-0xf9ffffff 64bit pref] [ 3.354770] pci_bus 0000:00: resource 4 [io 0x0000-0x03af window] [ 3.360954] pci_bus 0000:00: resource 5 [io 0x03e0-0x0cf7 window] [ 3.367132] pci_bus 0000:00: resource 6 [io 0x03b0-0x03df window] [ 3.373312] pci_bus 0000:00: resource 7 [io 0x0d00-0xffff window] [ 3.379492] pci_bus 0000:00: resource 8 [mem 0x000a0000-0x000dffff window] [ 3.386364] pci_bus 0000:00: resource 9 [mem 0xfed08000-0xfed08fff window] [ 3.393238] pci_bus 0000:00: resource 10 [mem 0xfed0e000-0xfed0ffff window] [ 3.400196] pci_bus 0000:00: resource 11 [mem 0x80000000-0xfbffffff window] [ 3.407157] pci_bus 0000:04: resource 0 [io 0xe000-0xefff] [ 3.412730] pci_bus 0000:04: resource 2 [mem 0xfa000000-0xfa4fffff 64bit pref] [ 3.419947] pci_bus 0000:05: resource 0 [io 0xd000-0xdfff] [ 3.425523] pci_bus 0000:05: resource 1 [mem 0xfba00000-0xfbafffff] [ 3.431787] pci_bus 0000:06: resource 0 [io 0xc000-0xcfff] [ 3.437359] pci_bus 0000:06: resource 1 [mem 0xfb900000-0xfb9fffff] [ 3.443625] pci_bus 0000:07: resource 1 [mem 0xfb000000-0xfb8fffff] [ 3.449891] pci_bus 0000:07: resource 2 [mem 0xf9000000-0xf9ffffff 64bit pref] [ 3.457110] pci_bus 0000:07: resource 4 [io 0x0000-0x03af window] [ 3.463291] pci_bus 0000:07: resource 5 [io 0x03e0-0x0cf7 window] [ 3.469471] pci_bus 0000:07: resource 6 [io 0x03b0-0x03df window] [ 3.475649] pci_bus 0000:07: resource 7 [io 0x0d00-0xffff window] [ 3.481829] pci_bus 0000:07: resource 8 [mem 0x000a0000-0x000dffff window] [ 3.488703] pci_bus 0000:07: resource 9 [mem 0xfed08000-0xfed08fff window] [ 3.495574] pci_bus 0000:07: resource 10 [mem 0xfed0e000-0xfed0ffff window] [ 3.502533] pci_bus 0000:07: resource 11 [mem 0x80000000-0xfbffffff window] [ 3.509588] pci 0000:00:05.0: disabled boot interrupts on device [8086:0e28] [ 3.541503] pci 0000:00:1a.0: quirk_usb_early_handoff+0x0/0x750 took 24264 usecs [ 3.573488] pci 0000:00:1d.0: quirk_usb_early_handoff+0x0/0x750 took 23995 usecs [ 3.580990] PCI: CLS 64 bytes, default 64 [ 3.585037] DMAR: No SATC found [ 3.585067] Trying to unpack rootfs image as initramfs... [ 3.588181] DMAR: dmar0: Using Queued invalidation [ 3.588260] pci 0000:00:00.0: Adding to iommu group 0 [ 3.603499] pci 0000:00:01.0: Adding to iommu group 1 [ 3.608579] pci 0000:00:01.1: Adding to iommu group 2 [ 3.613669] pci 0000:00:03.0: Adding to iommu group 3 [ 3.618748] pci 0000:00:04.0: Adding to iommu group 4 [ 3.623825] pci 0000:00:04.1: Adding to iommu group 5 [ 3.628910] pci 0000:00:04.2: Adding to iommu group 6 [ 3.633994] pci 0000:00:04.3: Adding to iommu group 7 [ 3.639072] pci 0000:00:04.4: Adding to iommu group 8 [ 3.644152] pci 0000:00:04.5: Adding to iommu group 9 [ 3.649233] pci 0000:00:04.6: Adding to iommu group 10 [ 3.654403] pci 0000:00:04.7: Adding to iommu group 11 [ 3.659570] pci 0000:00:05.0: Adding to iommu group 12 [ 3.664734] pci 0000:00:05.2: Adding to iommu group 13 [ 3.669904] pci 0000:00:05.4: Adding to iommu group 14 [ 3.675076] pci 0000:00:11.0: Adding to iommu group 15 [ 3.680263] pci 0000:00:16.0: Adding to iommu group 16 [ 3.685430] pci 0000:00:16.1: Adding to iommu group 16 [ 3.690603] pci 0000:00:1a.0: Adding to iommu group 17 [ 3.695776] pci 0000:00:1c.0: Adding to iommu group 18 [ 3.700947] pci 0000:00:1c.1: Adding to iommu group 19 [ 3.706110] pci 0000:00:1d.0: Adding to iommu group 20 [ 3.711276] pci 0000:00:1e.0: Adding to iommu group 21 [ 3.716487] pci 0000:00:1f.0: Adding to iommu group 22 [ 3.721651] pci 0000:00:1f.2: Adding to iommu group 22 [ 3.726815] pci 0000:00:1f.3: Adding to iommu group 22 [ 3.731981] pci 0000:00:1f.6: Adding to iommu group 22 [ 3.737157] pci 0000:04:00.0: Adding to iommu group 23 [ 3.742321] pci 0000:05:00.0: Adding to iommu group 24 [ 3.747487] pci 0000:06:00.0: Adding to iommu group 25 [ 3.752633] pci 0000:07:01.0: Adding to iommu group 21 [ 3.757815] pci 0000:ff:08.0: Adding to iommu group 26 [ 3.762995] pci 0000:ff:09.0: Adding to iommu group 27 [ 3.768209] pci 0000:ff:0a.0: Adding to iommu group 28 [ 3.773374] pci 0000:ff:0a.1: Adding to iommu group 28 [ 3.778539] pci 0000:ff:0a.2: Adding to iommu group 28 [ 3.783711] pci 0000:ff:0a.3: Adding to iommu group 28 [ 3.788905] pci 0000:ff:0b.0: Adding to iommu group 29 [ 3.794075] pci 0000:ff:0b.3: Adding to iommu group 29 [ 3.799269] pci 0000:ff:0c.0: Adding to iommu group 30 [ 3.804438] pci 0000:ff:0c.1: Adding to iommu group 30 [ 3.809630] pci 0000:ff:0d.0: Adding to iommu group 31 [ 3.814804] pci 0000:ff:0d.1: Adding to iommu group 31 [ 3.819997] pci 0000:ff:0e.0: Adding to iommu group 32 [ 3.825174] pci 0000:ff:0e.1: Adding to iommu group 32 [ 3.830342] pci 0000:ff:0f.0: Adding to iommu group 33 [ 3.835506] pci 0000:ff:0f.1: Adding to iommu group 34 [ 3.840669] pci 0000:ff:0f.2: Adding to iommu group 35 [ 3.845838] pci 0000:ff:0f.3: Adding to iommu group 36 [ 3.851002] pci 0000:ff:0f.4: Adding to iommu group 37 [ 3.856168] pci 0000:ff:0f.5: Adding to iommu group 38 [ 3.861335] pci 0000:ff:10.0: Adding to iommu group 39 [ 3.866506] pci 0000:ff:10.1: Adding to iommu group 40 [ 3.871674] pci 0000:ff:10.2: Adding to iommu group 41 [ 3.876837] pci 0000:ff:10.3: Adding to iommu group 42 [ 3.882003] pci 0000:ff:10.4: Adding to iommu group 43 [ 3.887171] pci 0000:ff:10.5: Adding to iommu group 44 [ 3.892343] pci 0000:ff:10.6: Adding to iommu group 45 [ 3.897506] pci 0000:ff:10.7: Adding to iommu group 46 [ 3.902720] pci 0000:ff:13.0: Adding to iommu group 47 [ 3.907915] pci 0000:ff:13.1: Adding to iommu group 47 [ 3.913090] pci 0000:ff:13.4: Adding to iommu group 47 [ 3.918263] pci 0000:ff:13.5: Adding to iommu group 47 [ 3.923468] pci 0000:ff:16.0: Adding to iommu group 48 [ 3.928646] pci 0000:ff:16.1: Adding to iommu group 48 [ 3.933823] pci 0000:ff:16.2: Adding to iommu group 48 [ 3.942835] DMAR: Intel(R) Virtualization Technology for Directed I/O [ 3.949291] PCI-DMA: Using software bounce buffering for IO (SWIOTLB) [ 3.955729] software IO TLB: mapped [mem 0x0000000079e2c000-0x000000007de2c000] (64MB) [ 3.964230] Initialise system trusted keyrings [ 3.968695] Key type blacklist registered [ 3.972790] workingset: timestamp_bits=36 max_order=21 bucket_order=0 [ 3.981115] zbud: loaded [ 3.983979] integrity: Platform Keyring initialized [ 3.988878] integrity: Machine keyring initialized [ 3.993676] Key type asymmetric registered [ 3.997776] Asymmetric key parser 'x509' registered [ 4.029658] Freeing initrd memory: 39592K [ 4.041049] alg: self-tests for CTR-KDF (hmac(sha256)) passed [ 4.046831] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 248) [ 4.054264] io scheduler mq-deadline registered [ 4.061237] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4 [ 4.068054] Monitor-Mwait will be used to enter C-1 state [ 4.068067] Monitor-Mwait will be used to enter C-2 state [ 4.068074] ACPI: \_SB_.SCK0.C000: Found 2 idle states [ 4.078149] ERST: Error Record Serialization Table (ERST) support is initialized. [ 4.085642] pstore: Registered erst as persistent store backend [ 4.091722] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled [ 4.098156] 00:07: ttyS0 at I/O 0x3f8 (irq = 4, base_baud = 115200) is a 16550A [ 4.106249] 00:08: ttyS1 at I/O 0x2f8 (irq = 3, base_baud = 115200) is a 16550A [ 4.114473] Linux agpgart interface v0.103 [ 4.118702] AMD-Vi: AMD IOMMUv2 functionality not available on this system - This is not a bug. [ 4.127841] i8042: PNP: PS/2 Controller [PNP0f03:PS2M] at 0x60,0x64 irq 12 [ 4.134721] i8042: PNP: PS/2 controller doesn't have KBD irq; using default 1 [ 4.144582] serio: i8042 KBD port at 0x60,0x64 irq 1 [ 4.149556] serio: i8042 AUX port at 0x60,0x64 irq 12 [ 4.154797] mousedev: PS/2 mouse device common for all mice [ 4.160409] rtc_cmos 00:02: RTC can wake from S4 [ 4.165333] rtc_cmos 00:02: registered as rtc0 [ 4.169819] rtc_cmos 00:02: setting system clock to 2024-06-22T13:05:44 UTC (1719061544) [ 4.177944] rtc_cmos 00:02: alarms up to one month, y3k, 114 bytes nvram, hpet irqs [ 4.185772] intel_pstate: Intel P-state driver initializing [ 4.191617] ledtrig-cpu: registered to indicate activity on CPUs [ 4.216000] NET: Registered PF_INET6 protocol family [ 4.228420] Segment Routing with IPv6 [ 4.232111] In-situ OAM (IOAM) with IPv6 [ 4.236087] mip6: Mobile IPv6 [ 4.239068] NET: Registered PF_PACKET protocol family [ 4.244206] mpls_gso: MPLS GSO support [ 4.248469] microcode: sig=0x306e4, pf=0x8, revision=0x42e [ 4.254017] microcode: Microcode Update Driver: v2.2. [ 4.254024] IPI shorthand broadcast: enabled [ 4.263384] sched_clock: Marking stable (3273962653, 989385138)->(4637998670, -374650879) [ 4.271804] registered taskstats version 1 [ 4.275924] Loading compiled-in X.509 certificates [ 4.322691] Loaded X.509 cert 'Debian Secure Boot CA: 6ccece7e4c6c0d1f6149f3dd27dfcc5cbb419ea1' [ 4.331417] Loaded X.509 cert 'Debian Secure Boot Signer 2022 - linux: 14011249c2675ea8e5148542202005810584b25f' [ 4.342019] zswap: loaded using pool lzo/zbud [ 4.346598] Key type .fscrypt registered [ 4.350533] Key type fscrypt-provisioning registered [ 4.355820] pstore: Using crash dump compression: deflate [ 4.369749] Key type encrypted registered [ 4.373791] AppArmor: AppArmor sha1 policy hashing enabled [ 4.379290] ima: No TPM chip found, activating TPM-bypass! [ 4.384782] ima: Allocated hash algorithm: sha256 [ 4.389499] ima: No architecture policies found [ 4.394039] evm: Initialising EVM extended attributes: [ 4.399176] evm: security.selinux [ 4.402494] evm: security.SMACK64 (disabled) [ 4.406766] evm: security.SMACK64EXEC (disabled) [ 4.411385] evm: security.SMACK64TRANSMUTE (disabled) [ 4.416440] evm: security.SMACK64MMAP (disabled) [ 4.421058] evm: security.apparmor [ 4.424464] evm: security.ima [ 4.427437] evm: security.capability [ 4.431015] evm: HMAC attrs: 0x1 [ 4.614593] clk: Disabling unused clocks [ 4.620214] Freeing unused decrypted memory: 2036K [ 4.625739] Freeing unused kernel image (initmem) memory: 2796K [ 4.631742] Write protecting the kernel read-only data: 26624k [ 4.638297] Freeing unused kernel image (text/rodata gap) memory: 2040K [ 4.645289] Freeing unused kernel image (rodata/data gap) memory: 1180K [ 4.737928] x86/mm: Checked W+X mappings: passed, no W+X pages found. [ 4.744366] x86/mm: Checking user space page tables [ 4.824115] x86/mm: Checked W+X mappings: passed, no W+X pages found. [ 4.830561] Run /init as init process [ 4.834223] with arguments: [ 4.834225] /init [ 4.834226] with environment: [ 4.834227] HOME=/ [ 4.834229] TERM=linux [ 4.834230] BOOT_IMAGE=/vmlinuz-6.1.0-21-amd64 [ 4.993413] tsc: Refined TSC clocksource calibration: 1799.999 MHz [ 4.999611] clocksource: tsc: mask: 0xffffffffffffffff max_cycles: 0x19f228ab7a2, max_idle_ns: 440795289252 ns [ 5.009645] clocksource: Switched to clocksource tsc [ 5.056148] i801_smbus 0000:00:1f.3: SMBus using PCI interrupt [ 5.072281] e1000e: Intel(R) PRO/1000 Network Driver [ 5.073911] i2c i2c-0: 1/6 memory slots populated (from DMI) [ 5.077260] e1000e: Copyright(c) 1999 - 2015 Intel Corporation. [ 5.082918] i2c i2c-0: Systems with more than 4 memory slots not supported yet, not instantiating SPD [ 5.089930] e1000e 0000:05:00.0: Interrupt Throttling Rate (ints/sec) set to dynamic conservative mode [ 5.109281] ACPI: bus type USB registered [ 5.113490] usbcore: registered new interface driver usbfs [ 5.122066] usbcore: registered new interface driver hub [ 5.127427] usbcore: registered new device driver usb [ 5.134924] SCSI subsystem initialized [ 5.146253] ehci-pci 0000:00:1a.0: EHCI Host Controller [ 5.151580] ehci-pci 0000:00:1a.0: new USB bus registered, assigned bus number 1 [ 5.159007] ehci-pci 0000:00:1a.0: debug port 2 [ 5.167497] ehci-pci 0000:00:1a.0: irq 16, io mem 0xfbb23000 [ 5.174476] libata version 3.00 loaded. [ 5.176392] e1000e 0000:05:00.0 0000:05:00.0 (uninitialized): registered PHC clock [ 5.185403] ehci-pci 0000:00:1a.0: USB 2.0 started, EHCI 1.00 [ 5.191228] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 6.01 [ 5.191493] ahci 0000:00:1f.2: version 3.0 [ 5.199499] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 5.199502] usb usb1: Product: EHCI Host Controller [ 5.199504] usb usb1: Manufacturer: Linux 6.1.0-21-amd64 ehci_hcd [ 5.217053] ahci 0000:00:1f.2: AHCI 0001.0300 32 slots 6 ports 6 Gbps 0x3f impl SATA mode [ 5.217692] usb usb1: SerialNumber: 0000:00:1a.0 [ 5.218002] hub 1-0:1.0: USB hub found [ 5.225874] ahci 0000:00:1f.2: flags: 64bit ncq sntf pm led clo pio slum part ems apst [ 5.233729] e1000e 0000:05:00.0 eth0: (PCI Express:2.5GT/s:Width x1) 0c:c4:7a:13:33:8c [ 5.234268] hub 1-0:1.0: 2 ports detected [ 5.242253] e1000e 0000:05:00.0 eth0: Intel(R) PRO/1000 Network Connection [ 5.254048] ehci-pci 0000:00:1d.0: EHCI Host Controller [ 5.254256] e1000e 0000:05:00.0 eth0: MAC: 3, PHY: 8, PBA No: FFFFFF-0FF [ 5.261059] ehci-pci 0000:00:1d.0: new USB bus registered, assigned bus number 2 [ 5.266535] e1000e 0000:06:00.0: Interrupt Throttling Rate (ints/sec) set to dynamic conservative mode [ 5.272996] ehci-pci 0000:00:1d.0: debug port 2 [ 5.294040] scsi host0: ahci [ 5.297330] scsi host1: ahci [ 5.297640] isci: Intel(R) C600 SAS Controller Driver - version 1.2.0 [ 5.298201] ehci-pci 0000:00:1d.0: irq 23, io mem 0xfbb22000 [ 5.300434] scsi host2: ahci [ 5.306670] isci 0000:04:00.0: driver configured for rev: 6 silicon [ 5.312487] scsi host3: ahci [ 5.317470] ehci-pci 0000:00:1d.0: USB 2.0 started, EHCI 1.00 [ 5.324597] scsi host4: ahci [ 5.330745] usb usb2: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 6.01 [ 5.333470] isci 0000:04:00.0: OEM parameter table found in OROM [ 5.333474] isci 0000:04:00.0: OEM SAS parameters (version: 1.0) loaded (platform) [ 5.333725] isci 0000:04:00.0: SCU controller 0: phy 3-0 cables: {short, short, short, short} [ 5.334075] scsi host6: ahci [ 5.334142] ata1: SATA max UDMA/133 abar m2048@0xfbb21000 port 0xfbb21100 irq 32 [ 5.334149] ata2: SATA max UDMA/133 abar m2048@0xfbb21000 port 0xfbb21180 irq 32 [ 5.334152] ata3: SATA max UDMA/133 abar m2048@0xfbb21000 port 0xfbb21200 irq 32 [ 5.334157] ata4: SATA max UDMA/133 abar m2048@0xfbb21000 port 0xfbb21280 irq 32 [ 5.334159] ata5: SATA max UDMA/133 abar m2048@0xfbb21000 port 0xfbb21300 irq 32 [ 5.334165] ata6: SATA max UDMA/133 abar m2048@0xfbb21000 port 0xfbb21380 irq 32 [ 5.339568] e1000e 0000:06:00.0 0000:06:00.0 (uninitialized): registered PHC clock [ 5.341849] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 5.341852] usb usb2: Product: EHCI Host Controller [ 5.341854] usb usb2: Manufacturer: Linux 6.1.0-21-amd64 ehci_hcd [ 5.341856] usb usb2: SerialNumber: 0000:00:1d.0 [ 5.350627] scsi host5: isci [ 5.355621] hub 2-0:1.0: USB hub found [ 5.390772] e1000e 0000:06:00.0 eth1: (PCI Express:2.5GT/s:Width x1) 0c:c4:7a:13:33:8d [ 5.396405] hub 2-0:1.0: 2 ports detected [ 5.403800] e1000e 0000:06:00.0 eth1: Intel(R) PRO/1000 Network Connection [ 5.403883] e1000e 0000:06:00.0 eth1: MAC: 3, PHY: 8, PBA No: FFFFFF-0FF [ 5.537458] usb 1-1: new high-speed USB device number 2 using ehci-pci [ 5.648372] ata4: SATA link down (SStatus 0 SControl 300) [ 5.653817] ata5: SATA link down (SStatus 0 SControl 300) [ 5.659252] ata1: SATA link up 6.0 Gbps (SStatus 133 SControl 300) [ 5.665465] ata3: SATA link down (SStatus 0 SControl 300) [ 5.669406] usb 2-1: new high-speed USB device number 2 using ehci-pci [ 5.670905] ata2: SATA link down (SStatus 0 SControl 300) [ 5.682876] ata6: SATA link down (SStatus 0 SControl 300) [ 5.688314] ata1.00: ATA-8: WDC WD1003FBYZ-010FB0, 01.01V03, max UDMA/133 [ 5.695424] ata1.00: 1953525168 sectors, multi 16: LBA48 NCQ (depth 32), AA [ 5.704069] ata1.00: configured for UDMA/133 [ 5.705831] usb 1-1: New USB device found, idVendor=8087, idProduct=0024, bcdDevice= 0.00 [ 5.708424] scsi: waiting for bus probes to complete ... [ 5.716528] usb 1-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0 [ 5.716915] hub 1-1:1.0: USB hub found [ 5.732840] hub 1-1:1.0: 6 ports detected [ 5.781758] scsi 0:0:0:0: Direct-Access ATA WDC WD1003FBYZ-0 1V03 PQ: 0 ANSI: 5 [ 5.793107] e1000e 0000:05:00.0 enx0cc47a13338c: renamed from eth0 [ 5.817687] sd 0:0:0:0: [sda] 1953525168 512-byte logical blocks: (1.00 TB/932 GiB) [ 5.825366] sd 0:0:0:0: [sda] Write Protect is off [ 5.825837] e1000e 0000:06:00.0 enx0cc47a13338d: renamed from eth1 [ 5.830187] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00 [ 5.830251] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 5.845476] sd 0:0:0:0: [sda] Preferred minimum I/O size 512 bytes [ 5.855081] usb 2-1: New USB device found, idVendor=8087, idProduct=0024, bcdDevice= 0.00 [ 5.863271] usb 2-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0 [ 5.870788] hub 2-1:1.0: USB hub found [ 5.874724] hub 2-1:1.0: 8 ports detected [ 5.877426] sda: sda1 sda2 < sda5 > [ 5.882506] sd 0:0:0:0: [sda] Attached SCSI disk [ 6.057450] usb 1-1.1: new full-speed USB device number 3 using ehci-pci [ 6.171551] usb 1-1.1: New USB device found, idVendor=0557, idProduct=2221, bcdDevice= 0.01 [ 6.179920] usb 1-1.1: New USB device strings: Mfr=1, Product=2, SerialNumber=0 [ 6.187231] usb 1-1.1: Product: Hermon USB hidmouse Device [ 6.192719] usb 1-1.1: Manufacturer: Winbond Electronics Corp [ 6.213187] hid: raw HID events driver (C) Jiri Kosina [ 6.225203] usbcore: registered new interface driver usbhid [ 6.230824] usbhid: USB HID core driver [ 6.237693] input: Winbond Electronics Corp Hermon USB hidmouse Device as /devices/pci0000:00/0000:00:1a.0/usb1/1-1/1-1.1/1-1.1:1.0/0003:0557:2221.0001/input/input3 [ 6.252640] hid-generic 0003:0557:2221.0001: input,hidraw0: USB HID v1.00 Mouse [Winbond Electronics Corp Hermon USB hidmouse Device] on usb-0000:00:1a.0-1.1/input0 [ 6.267615] input: Winbond Electronics Corp Hermon USB hidmouse Device as /devices/pci0000:00/0000:00:1a.0/usb1/1-1/1-1.1/1-1.1:1.1/0003:0557:2221.0002/input/input4 [ 6.326586] device-mapper: core: CONFIG_IMA_DISABLE_HTABLE is disabled. Duplicate IMA measurements will not be recorded in the IMA log. [ 6.338814] device-mapper: uevent: version 1.0.3 [ 6.343571] device-mapper: ioctl: 4.47.0-ioctl (2022-07-28) initialised: dm-devel@redhat.com [ 6.345602] hid-generic 0003:0557:2221.0002: input,hidraw1: USB HID v1.00 Keyboard [Winbond Electronics Corp Hermon USB hidmouse Device] on usb-0000:00:1a.0-1.1/input1 [ 6.883793] PM: Image not found (code -22) [ 7.307301] EXT4-fs (dm-0): mounting ext3 file system using the ext4 subsystem [ 7.318926] EXT4-fs (dm-0): mounted filesystem with ordered data mode. Quota mode: none. [ 7.515077] Not activating Mandatory Access Control as /sbin/tomoyo-init does not exist. [ 9.283869] input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input5 [ 9.305651] ACPI: button: Power Button [PWRB] [ 9.311367] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input6 [ 9.318842] ACPI: button: Power Button [PWRF] [ 9.463935] dca service started, version 1.12.1 [ 9.482015] IPMI message handler: version 39.2 [ 9.488712] ipmi device interface [ 9.531978] input: PC Speaker as /devices/platform/pcspkr/input/input7 [ 9.637629] iTCO_vendor_support: vendor-support=0 [ 9.692887] ipmi_si: IPMI System Interface driver [ 9.697673] ipmi_si dmi-ipmi-si.0: ipmi_platform: probing via SMBIOS [ 9.697785] iTCO_wdt iTCO_wdt.1.auto: unable to reset NO_REBOOT flag, device disabled by hardware/BIOS [ 9.704035] ipmi_platform: ipmi_si: SMBIOS: io 0xca2 regsize 1 spacing 1 irq 0 [ 9.720556] ipmi_si: Adding SMBIOS-specified kcs state machine [ 9.729173] ipmi_si IPI0001:00: ipmi_platform: probing via ACPI [ 9.735267] ipmi_si IPI0001:00: ipmi_platform: [io 0x0ca2] regsize 1 spacing 1 irq 0 [ 9.735521] ioatdma: Intel(R) QuickData Technology Driver 5.00 [ 9.776683] ipmi_si dmi-ipmi-si.0: Removing SMBIOS-specified kcs state machine in favor of ACPI [ 9.785442] ipmi_si: Adding ACPI-specified kcs state machine [ 9.791820] sd 0:0:0:0: Attached scsi generic sg0 type 0 [ 9.792220] ipmi_si: Trying ACPI-specified kcs state machine at i/o address 0xca2, slave address 0x0, irq 0 [ 9.813798] mei_me 0000:00:16.0: Device doesn't have valid ME Interface [ 9.845223] RAPL PMU: API unit is 2^-32 Joules, 3 fixed counters, 163840 ms ovfl timer [ 9.853228] RAPL PMU: hw unit of domain pp0-core 2^-16 Joules [ 9.858995] RAPL PMU: hw unit of domain package 2^-16 Joules [ 9.864656] RAPL PMU: hw unit of domain dram 2^-16 Joules [ 9.900623] cryptd: max_cpu_qlen set to 1000 [ 10.020958] ACPI: bus type drm_connector registered [ 10.043940] AVX version of gcm_enc/dec engaged. [ 10.048541] AES CTR mode by8 optimization enabled [ 10.097419] ipmi_si IPI0001:00: The BMC does not support clearing the recv irq bit, compensating, but the BMC needs to be fixed. [ 10.186541] ipmi_si IPI0001:00: IPMI message handler: Found new BMC (man_id: 0x002a7c, prod_id: 0x0703, dev_id: 0x20) [ 10.201336] mgag200 0000:07:01.0: vgaarb: deactivate vga console [ 10.212403] Console: switching to colour dummy device 80x25 [ 10.223938] [drm] Initialized mgag200 1.0.0 20110418 for 0000:07:01.0 on minor 0 [ 10.233082] fbcon: mgag200drmfb (fb0) is primary device [ 10.235215] ipmi_si IPI0001:00: IPMI kcs interface initialized [ 10.299467] ipmi_ssif: IPMI SSIF Interface driver [ 10.603883] Console: switching to colour frame buffer device 128x48 [ 10.732164] mgag200 0000:07:01.0: [drm] fb0: mgag200drmfb frame buffer device [ 11.032847] EDAC sbridge: Seeking for: PCI ID 8086:0ea0 [ 11.032874] EDAC sbridge: Seeking for: PCI ID 8086:0ea0 [ 11.032881] EDAC sbridge: Seeking for: PCI ID 8086:0e60 [ 11.032889] EDAC sbridge: Seeking for: PCI ID 8086:0ea8 [ 11.032898] EDAC sbridge: Seeking for: PCI ID 8086:0ea8 [ 11.032901] EDAC sbridge: Seeking for: PCI ID 8086:0e71 [ 11.032910] EDAC sbridge: Seeking for: PCI ID 8086:0e71 [ 11.032914] EDAC sbridge: Seeking for: PCI ID 8086:0eaa [ 11.032922] EDAC sbridge: Seeking for: PCI ID 8086:0eaa [ 11.032926] EDAC sbridge: Seeking for: PCI ID 8086:0eab [ 11.032934] EDAC sbridge: Seeking for: PCI ID 8086:0eab [ 11.032938] EDAC sbridge: Seeking for: PCI ID 8086:0eac [ 11.032947] EDAC sbridge: Seeking for: PCI ID 8086:0eac [ 11.032950] EDAC sbridge: Seeking for: PCI ID 8086:0ead [ 11.032959] EDAC sbridge: Seeking for: PCI ID 8086:0ead [ 11.032962] EDAC sbridge: Seeking for: PCI ID 8086:0e68 [ 11.032970] EDAC sbridge: Seeking for: PCI ID 8086:0e79 [ 11.032977] EDAC sbridge: Seeking for: PCI ID 8086:0e6a [ 11.032985] EDAC sbridge: Seeking for: PCI ID 8086:0e6b [ 11.032993] EDAC sbridge: Seeking for: PCI ID 8086:0e6c [ 11.033001] EDAC sbridge: Seeking for: PCI ID 8086:0e6d [ 11.033009] EDAC sbridge: Seeking for: PCI ID 8086:0eb8 [ 11.033016] EDAC sbridge: Seeking for: PCI ID 8086:0ebc [ 11.033024] EDAC sbridge: Seeking for: PCI ID 8086:0ec8 [ 11.033034] EDAC sbridge: Seeking for: PCI ID 8086:0ec8 [ 11.033036] EDAC sbridge: Seeking for: PCI ID 8086:0ec9 [ 11.033046] EDAC sbridge: Seeking for: PCI ID 8086:0ec9 [ 11.033048] EDAC sbridge: Seeking for: PCI ID 8086:0eca [ 11.033057] EDAC sbridge: Seeking for: PCI ID 8086:0eca [ 11.033195] EDAC MC0: Giving out device to module sb_edac controller Ivy Bridge SrcID#0_Ha#0: DEV 0000:ff:0e.0 (INTERRUPT) [ 11.044274] EDAC sbridge: Ver: 1.1.2 [ 11.189494] intel_rapl_common: Found RAPL domain package [ 11.194823] intel_rapl_common: Found RAPL domain core [ 11.199883] intel_rapl_common: Found RAPL domain dram [ 12.415678] EXT4-fs (dm-0): re-mounted. Quota mode: none. [ 13.699533] EXT4-fs (sda1): mounting ext3 file system using the ext4 subsystem [ 13.741103] EXT4-fs (sda1): mounted filesystem with ordered data mode. Quota mode: none. [ 13.796726] Adding 1949692k swap on /dev/mapper/fiano0--vg-swap_1. Priority:-2 extents:1 across:1949692k FS [ 14.467774] audit: type=1400 audit(1719061554.796:2): apparmor="STATUS" operation="profile_load" profile="unconfined" name="lsb_release" pid=1065 comm="apparmor_parser" [ 14.505423] audit: type=1400 audit(1719061554.796:3): apparmor="STATUS" operation="profile_load" profile="unconfined" name="nvidia_modprobe" pid=1066 comm="apparmor_parser" [ 14.520814] audit: type=1400 audit(1719061554.800:4): apparmor="STATUS" operation="profile_load" profile="unconfined" name="nvidia_modprobe//kmod" pid=1066 comm="apparmor_parser" [ 14.536739] audit: type=1400 audit(1719061554.860:5): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/bin/man" pid=1068 comm="apparmor_parser" [ 14.551864] audit: type=1400 audit(1719061554.860:6): apparmor="STATUS" operation="profile_load" profile="unconfined" name="man_filter" pid=1068 comm="apparmor_parser" [ 14.566823] audit: type=1400 audit(1719061554.860:7): apparmor="STATUS" operation="profile_load" profile="unconfined" name="man_groff" pid=1068 comm="apparmor_parser" [ 14.702450] audit: type=1400 audit(1719061555.032:8): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/sbin/ntpd" pid=1080 comm="apparmor_parser" [ 14.727519] audit: type=1400 audit(1719061555.056:9): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=1067 comm="apparmor_parser" [ 14.745500] audit: type=1400 audit(1719061555.060:10): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/NetworkManager/nm-dhcp-helper" pid=1067 comm="apparmor_parser" [ 14.764372] audit: type=1400 audit(1719061555.060:11): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/connman/scripts/dhclient-script" pid=1067 comm="apparmor_parser" [ 17.934484] e1000e 0000:05:00.0 enx0cc47a13338c: NIC Link is Up 1000 Mbps Full Duplex, Flow Control: None [ 17.944409] IPv6: ADDRCONF(NETDEV_CHANGE): enx0cc47a13338c: link becomes ready