[ 0.000000] Linux version 6.10.0-rc4+ (osstest@himrod0) (gcc (Debian 12.2.0-14) 12.2.0, GNU ld (GNU Binutils for Debian) 2.40) #1 SMP PREEMPT_DYNAMIC Sun Jun 23 01:26:46 UTC 2024 [ 0.000000] Command line: placeholder root=/dev/mapper/italia0--vg-root ro console=hvc0 [ 0.000000] Released 0 page(s) [ 0.000000] BIOS-provided physical RAM map: [ 0.000000] Xen: [mem 0x0000000000000000-0x000000000009afff] usable [ 0.000000] Xen: [mem 0x000000000009bc00-0x00000000000fffff] reserved [ 0.000000] Xen: [mem 0x0000000000100000-0x0000000020064fff] usable [ 0.000000] Xen: [mem 0x00000000ab9ba000-0x00000000bba3afff] ACPI NVS [ 0.000000] Xen: [mem 0x00000000bc60a000-0x00000000bc73ffff] reserved [ 0.000000] Xen: [mem 0x00000000beaee000-0x00000000beaf8fff] reserved [ 0.000000] Xen: [mem 0x00000000beb05000-0x00000000beb15fff] reserved [ 0.000000] Xen: [mem 0x00000000bed3a000-0x00000000beddffff] reserved [ 0.000000] Xen: [mem 0x00000000bede0000-0x00000000befdffff] ACPI NVS [ 0.000000] Xen: [mem 0x00000000befe0000-0x00000000beffefff] ACPI data [ 0.000000] Xen: [mem 0x00000000bf000000-0x00000000bfffffff] reserved [ 0.000000] Xen: [mem 0x00000000f8000000-0x00000000fbffffff] reserved [ 0.000000] Xen: [mem 0x00000000fec00000-0x00000000fec00fff] reserved [ 0.000000] Xen: [mem 0x00000000fed19000-0x00000000fed19fff] reserved [ 0.000000] Xen: [mem 0x00000000fed1c000-0x00000000fed1ffff] reserved [ 0.000000] Xen: [mem 0x00000000fed90000-0x00000000fed90fff] reserved [ 0.000000] Xen: [mem 0x00000000fee00000-0x00000000feefffff] reserved [ 0.000000] Xen: [mem 0x00000000ffa00000-0x00000000ffffffff] reserved [ 0.000000] NX (Execute Disable) protection: active [ 0.000000] APIC: Static calls initialized [ 0.000000] SMBIOS 2.6 present. [ 0.000000] DMI: Intel Corporation SandyBridge Platform/To be filled by O.E.M., BIOS S1200BT.86B.02.00.0042.050820141549 05/08/2014 [ 0.000000] DMI: Memory slots populated: 1/4 [ 0.000000] Hypervisor detected: Xen PV [ 0.000023] Xen PV: Detected 4 vCPUS [ 0.000488] tsc: Detected 3092.976 MHz processor [ 0.000896] e820: update [mem 0x00000000-0x00000fff] usable ==> reserved [ 0.000899] e820: remove [mem 0x000a0000-0x000fffff] usable [ 0.000906] last_pfn = 0x20065 max_arch_pfn = 0x400000000 [ 0.000908] MTRR map: 3 entries (0 fixed + 3 variable; max 20), built from 10 variable MTRRs [ 0.000909] MTRRs set to read-only [ 0.000913] x86/PAT: Configuration [0-7]: WB WT UC- UC WC WP UC UC [ 0.000949] Kernel/User page tables isolation: disabled on XEN PV. [ 0.024294] RAMDISK: [mem 0x04000000-0x053a5fff] [ 0.024302] ACPI: Early table checksum verification disabled [ 0.033859] ACPI: RSDP 0x00000000000F0410 000024 (v02 INTEL ) [ 0.033870] ACPI: XSDT 0x00000000BEFFDE18 0000BC (v01 INTEL S1200BTS 06222004 INTL 20090903) [ 0.033904] ACPI: FACP 0x00000000BEFFCA98 0000F4 (v04 INTEL S1200BTS 06222004 INTL 20090903) [ 0.033945] ACPI: DSDT 0x00000000BEFEE018 00CE48 (v02 INTEL S1200BTS 00000000 INTL 20100331) [ 0.033961] ACPI: FACS 0x00000000BEFFDD40 000040 [ 0.033977] ACPI: APIC 0x00000000BEFFB018 000652 (v03 INTEL S1200BTS 06222004 INTL 20090903) [ 0.033993] ACPI: SPMI 0x00000000BEFFEC18 000040 (v05 INTEL S1200BTS 06222004 INTL 20090903) [ 0.034009] ACPI: MCFG 0x00000000BEFFEB98 00003C (v01 INTEL S1200BTS 06222004 INTL 20090903) [ 0.034025] ACPI: WDDT 0x00000000BEFFEF18 000040 (v01 INTEL S1200BTS 06222004 INTL 20090903) [ 0.034041] ACPI: HPET 0x00000000BEFFEE98 000038 (v01 INTEL S1200BTS 06222004 INTL 20090903) [ 0.034057] ACPI: SSDT 0x00000000BEFEB018 0010A8 (v02 INTEL S1200BTS 00001000 INTL 20100331) [ 0.034074] ACPI: BOOT 0x00000000BEFFEE18 000028 (v01 INTEL S1200BTS 06222004 INTL 20090903) [ 0.034090] ACPI: SSDT 0x00000000BEFE7698 0005E0 (v02 INTEL S1200BTS 00003000 INTL 20100331) [ 0.034106] ACPI: SSDT 0x00000000BEFE6018 000A92 (v02 INTEL S1200BTS 00003000 INTL 20100331) [ 0.034122] ACPI: SSDT 0x00000000BEFEA598 00054D (v01 INTEL S1200BTS 00001000 INTL 20100331) [ 0.034138] ACPI: SSDT 0x00000000BEFFDB18 000069 (v01 INTEL S1200BTS 00001000 INTL 20100331) [ 0.034153] ACPI: SSDT 0x00000000BEFE9E18 00017B (v02 INTEL S1200BTS 00002000 INTL 20100331) [ 0.034170] ACPI: RMAD 0x00000000BEFE8F18 000078 (v01 INTEL S1200BTS 00000001 INTL 00000001) [ 0.034186] ACPI: SPCR 0x00000000BEFFED98 000050 (v01 INTEL S1200BTS 06222004 INTL 20090903) [ 0.034202] ACPI: HEST 0x00000000BEFFCF18 0000A8 (v01 INTEL S1200BTS 00000001 INTL 00000001) [ 0.034218] ACPI: BERT 0x00000000BEFFED18 000030 (v01 INTEL S1200BTS 00000001 INTL 00000001) [ 0.034234] ACPI: ERST 0x00000000BEFE8C98 000230 (v01 INTEL S1200BTS 00000001 INTL 00000001) [ 0.034250] ACPI: EINJ 0x00000000BEFFC918 000130 (v01 INTEL S1200BTS 00000001 INTL 00000001) [ 0.034258] ACPI: Reserving FACP table memory at [mem 0xbeffca98-0xbeffcb8b] [ 0.034260] ACPI: Reserving DSDT table memory at [mem 0xbefee018-0xbeffae5f] [ 0.034261] ACPI: Reserving FACS table memory at [mem 0xbeffdd40-0xbeffdd7f] [ 0.034261] ACPI: Reserving APIC table memory at [mem 0xbeffb018-0xbeffb669] [ 0.034262] ACPI: Reserving SPMI table memory at [mem 0xbeffec18-0xbeffec57] [ 0.034263] ACPI: Reserving MCFG table memory at [mem 0xbeffeb98-0xbeffebd3] [ 0.034264] ACPI: Reserving WDDT table memory at [mem 0xbeffef18-0xbeffef57] [ 0.034265] ACPI: Reserving HPET table memory at [mem 0xbeffee98-0xbeffeecf] [ 0.034265] ACPI: Reserving SSDT table memory at [mem 0xbefeb018-0xbefec0bf] [ 0.034266] ACPI: Reserving BOOT table memory at [mem 0xbeffee18-0xbeffee3f] [ 0.034267] ACPI: Reserving SSDT table memory at [mem 0xbefe7698-0xbefe7c77] [ 0.034268] ACPI: Reserving SSDT table memory at [mem 0xbefe6018-0xbefe6aa9] [ 0.034269] ACPI: Reserving SSDT table memory at [mem 0xbefea598-0xbefeaae4] [ 0.034269] ACPI: Reserving SSDT table memory at [mem 0xbeffdb18-0xbeffdb80] [ 0.034270] ACPI: Reserving SSDT table memory at [mem 0xbefe9e18-0xbefe9f92] [ 0.034271] ACPI: Reserving RMAD table memory at [mem 0xbefe8f18-0xbefe8f8f] [ 0.034272] ACPI: Reserving SPCR table memory at [mem 0xbeffed98-0xbeffede7] [ 0.034273] ACPI: Reserving HEST table memory at [mem 0xbeffcf18-0xbeffcfbf] [ 0.034274] ACPI: Reserving BERT table memory at [mem 0xbeffed18-0xbeffed47] [ 0.034274] ACPI: Reserving ERST table memory at [mem 0xbefe8c98-0xbefe8ec7] [ 0.034275] ACPI: Reserving EINJ table memory at [mem 0xbeffc918-0xbeffca47] [ 0.034370] APIC: Switched APIC routing to: Xen PV [ 0.039478] Zone ranges: [ 0.039479] DMA [mem 0x0000000000001000-0x0000000000ffffff] [ 0.039481] DMA32 [mem 0x0000000001000000-0x0000000020064fff] [ 0.039483] Normal empty [ 0.039484] Movable zone start for each node [ 0.039484] Early memory node ranges [ 0.039485] node 0: [mem 0x0000000000001000-0x000000000009afff] [ 0.039486] node 0: [mem 0x0000000000100000-0x0000000020064fff] [ 0.039488] Initmem setup node 0 [mem 0x0000000000001000-0x0000000020064fff] [ 0.039492] On node 0, zone DMA: 1 pages in unavailable ranges [ 0.039533] On node 0, zone DMA: 101 pages in unavailable ranges [ 0.041173] On node 0, zone DMA32: 32667 pages in unavailable ranges [ 0.041179] p2m virtual area at (____ptrval____), size is 40000000 [ 0.177481] Remapped 101 page(s) [ 0.178179] ACPI: PM-Timer IO Port: 0x408 [ 0.178341] ACPI: LAPIC_NMI (acpi_id[0xff] dfl dfl lint[0x1]) [ 0.178387] IOAPIC[0]: apic_id 2, version 32, address 0xfec00000, GSI 0-23 [ 0.178414] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl) [ 0.178417] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level) [ 0.178470] ACPI: Using ACPI (MADT) for SMP configuration information [ 0.178475] ACPI: HPET id: 0x8086a701 base: 0xfed00000 [ 0.178485] ACPI: SPCR: SPCR table version 1 [ 0.178487] ACPI: SPCR: console: uart,io,0x3f8,115200 [ 0.178496] CPU topo: Max. logical packages: 1 [ 0.178497] CPU topo: Max. logical dies: 1 [ 0.178498] CPU topo: Max. dies per package: 1 [ 0.178502] CPU topo: Max. threads per core: 1 [ 0.178504] CPU topo: Num. cores per package: 4 [ 0.178504] CPU topo: Num. threads per package: 4 [ 0.178505] CPU topo: Allowing 4 present CPUs plus 0 hotplug CPUs [ 0.178521] PM: hibernation: Registered nosave memory: [mem 0x00000000-0x00000fff] [ 0.178523] PM: hibernation: Registered nosave memory: [mem 0x0009b000-0x0009bfff] [ 0.178524] PM: hibernation: Registered nosave memory: [mem 0x0009c000-0x000fffff] [ 0.178525] [mem 0x20065000-0xab9b9fff] available for PCI devices [ 0.178535] Booting kernel on Xen [ 0.178535] Xen version: 4.19-unstable (preserve-AD) [ 0.178538] clocksource: refined-jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 1910969940391419 ns [ 0.183975] setup_percpu: NR_CPUS:64 nr_cpumask_bits:4 nr_cpu_ids:4 nr_node_ids:1 [ 0.184411] percpu: Embedded 57 pages/cpu s194408 r8192 d30872 u524288 [ 0.184416] pcpu-alloc: s194408 r8192 d30872 u524288 alloc=1*2097152 [ 0.184419] pcpu-alloc: [0] 0 1 2 3 [ 0.184469] xen: PV spinlocks enabled [ 0.184472] PV qspinlock hash table entries: 256 (order: 0, 4096 bytes, linear) [ 0.184474] Kernel command line: placeholder root=/dev/mapper/italia0--vg-root ro console=hvc0 [ 0.184510] Unknown kernel command line parameters "placeholder", will be passed to user space. [ 0.184600] Dentry cache hash table entries: 65536 (order: 7, 524288 bytes, linear) [ 0.184645] Inode-cache hash table entries: 32768 (order: 6, 262144 bytes, linear) [ 0.185332] Built 1 zonelists, mobility grouping on. Total pages: 131071 [ 0.185335] mem auto-init: stack:all(zero), heap alloc:off, heap free:off [ 0.185337] software IO TLB: area num 4. [ 0.247731] Memory: 386512K/524284K available (16384K kernel code, 2753K rwdata, 6164K rodata, 2680K init, 1864K bss, 137520K reserved, 0K cma-reserved) [ 0.247909] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1 [ 0.250129] Dynamic Preempt: voluntary [ 0.250299] rcu: Preemptible hierarchical RCU implementation. [ 0.250300] rcu: RCU event tracing is enabled. [ 0.250300] rcu: RCU restricting CPUs from NR_CPUS=64 to nr_cpu_ids=4. [ 0.250302] Trampoline variant of Tasks RCU enabled. [ 0.250303] rcu: RCU calculated value of scheduler-enlistment delay is 100 jiffies. [ 0.250304] rcu: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=4 [ 0.250327] RCU Tasks: Setting shift to 2 and lim to 1 rcu_task_cb_adjust=1. [ 0.262704] NR_IRQS: 4352, nr_irqs: 456, preallocated irqs: 16 [ 0.262858] xen:events: Using FIFO-based ABI [ 0.262890] xen: --> pirq=1 -> irq=1 (gsi=1) [ 0.262899] xen: --> pirq=2 -> irq=2 (gsi=2) [ 0.262908] xen: --> pirq=3 -> irq=3 (gsi=3) [ 0.262917] xen: --> pirq=4 -> irq=4 (gsi=4) [ 0.262925] xen: --> pirq=5 -> irq=5 (gsi=5) [ 0.262934] xen: --> pirq=6 -> irq=6 (gsi=6) [ 0.262942] xen: --> pirq=7 -> irq=7 (gsi=7) [ 0.262951] xen: --> pirq=8 -> irq=8 (gsi=8) [ 0.262959] xen: --> pirq=9 -> irq=9 (gsi=9) [ 0.262968] xen: --> pirq=10 -> irq=10 (gsi=10) [ 0.262978] xen: --> pirq=11 -> irq=11 (gsi=11) [ 0.262987] xen: --> pirq=12 -> irq=12 (gsi=12) [ 0.262996] xen: --> pirq=13 -> irq=13 (gsi=13) [ 0.263004] xen: --> pirq=14 -> irq=14 (gsi=14) [ 0.263013] xen: --> pirq=15 -> irq=15 (gsi=15) [ 0.263023] rcu: srcu_init: Setting srcu_struct sizes based on contention. [ 0.268130] Console: colour VGA+ 80x25 [ 0.268134] printk: legacy console [tty0] enabled [ 0.284358] printk: legacy console [hvc0] enabled [ 0.285758] ACPI: Core revision 20240322 [ 0.290182] clocksource: xen: mask: 0xffffffffffffffff max_cycles: 0x1cd42e4dffb, max_idle_ns: 881590591483 ns [ 0.290339] Xen: using vcpuop timer interface [ 0.290344] installing Xen timer for CPU 0 [ 0.290495] clocksource: tsc-early: mask: 0xffffffffffffffff max_cycles: 0x2c955c383c9, max_idle_ns: 440795294255 ns [ 0.290653] Calibrating delay loop (skipped), value calculated using timer frequency.. 6185.95 BogoMIPS (lpj=3092976) [ 0.290959] Last level iTLB entries: 4KB 512, 2MB 8, 4MB 8 [ 0.291076] Last level dTLB entries: 4KB 512, 2MB 32, 4MB 32, 1GB 0 [ 0.291207] Spectre V1 : Mitigation: usercopy/swapgs barriers and __user pointer sanitization [ 0.291356] Spectre V2 : Mitigation: Retpolines [ 0.291471] Spectre V2 : Spectre v2 / SpectreRSB mitigation: Filling RSB on context switch [ 0.291795] Spectre V2 : Spectre v2 / SpectreRSB : Filling RSB on VMEXIT [ 0.291914] Spectre V2 : Enabling Restricted Speculation for firmware calls [ 0.292035] Spectre V2 : mitigation: Enabling conditional Indirect Branch Prediction Barrier [ 0.292182] Speculative Store Bypass: Mitigation: Speculative Store Bypass disabled via prctl [ 0.292659] MDS: Mitigation: Clear CPU buffers [ 0.292773] MMIO Stale Data: Unknown: No mitigations [ 0.292908] x86/fpu: Supporting XSAVE feature 0x001: 'x87 floating point registers' [ 0.293090] x86/fpu: Supporting XSAVE feature 0x002: 'SSE registers' [ 0.293208] x86/fpu: Supporting XSAVE feature 0x004: 'AVX registers' [ 0.293327] x86/fpu: xstate_offset[2]: 576, xstate_sizes[2]: 256 [ 0.293445] x86/fpu: Enabled xstate features 0x7, context size is 832 bytes, using 'standard' format. [ 0.311598] Freeing SMP alternatives memory: 40K [ 0.311660] pid_max: default: 32768 minimum: 301 [ 0.311791] LSM: initializing lsm=capability,selinux [ 0.311910] SELinux: Initializing. [ 0.312042] Mount-cache hash table entries: 1024 (order: 1, 8192 bytes, linear) [ 0.312190] Mountpoint-cache hash table entries: 1024 (order: 1, 8192 bytes, linear) [ 0.312658] cpu 0 spinlock event irq 25 [ 0.312774] VPMU disabled by hypervisor. [ 0.313442] Performance Events: unsupported p6 CPU model 58 no PMU driver, software events only. [ 0.313597] signal: max sigframe size: 1776 [ 0.313737] rcu: Hierarchical SRCU implementation. [ 0.313853] rcu: Max phase no-delay instances is 400. [ 0.314426] smp: Bringing up secondary CPUs ... [ 0.314827] installing Xen timer for CPU 1 [ 0.315368] installing Xen timer for CPU 2 [ 0.315852] installing Xen timer for CPU 3 [ 0.028625] [Firmware Bug]: CPU 1: APIC ID mismatch. CPUID: 0x0001 APIC: 0x0002 [ 0.316049] cpu 1 spinlock event irq 45 [ 0.028625] [Firmware Bug]: CPU 2: APIC ID mismatch. CPUID: 0x0002 APIC: 0x0004 [ 0.316699] cpu 2 spinlock event irq 46 [ 0.028625] [Firmware Bug]: CPU 3: APIC ID mismatch. CPUID: 0x0003 APIC: 0x0006 [ 0.316960] cpu 3 spinlock event irq 47 [ 0.317841] smp: Brought up 1 node, 4 CPUs [ 0.318080] devtmpfs: initialized [ 0.318080] x86/mm: Memory block size: 128MB [ 0.318941] ACPI: PM: Registering ACPI NVS region [mem 0xab9ba000-0xbba3afff] (268963840 bytes) [ 0.320959] ACPI: PM: Registering ACPI NVS region [mem 0xbede0000-0xbefdffff] (2097152 bytes) [ 0.321168] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 1911260446275000 ns [ 0.321324] futex hash table entries: 1024 (order: 4, 65536 bytes, linear) [ 0.321569] PM: RTC time: 02:06:34, date: 2024-06-23 [ 0.321815] NET: Registered PF_NETLINK/PF_ROUTE protocol family [ 0.321959] xen:grant_table: Grant tables using version 1 layout [ 0.322102] Grant table initialized [ 0.322337] audit: initializing netlink subsys (disabled) [ 0.322469] audit: type=2000 audit(1719108395.169:1): state=initialized audit_enabled=0 res=1 [ 0.322705] thermal_sys: Registered thermal governor 'step_wise' [ 0.322707] thermal_sys: Registered thermal governor 'user_space' [ 0.322854] Simple Boot Flag at 0x4f set to 0x1 [ 0.323104] ACPI FADT declares the system doesn't support PCIe ASPM, so disable it [ 0.323399] PCI: ECAM [mem 0xf8000000-0xfbffffff] (base 0xf8000000) for domain 0000 [bus 00-3f] [ 0.323661] PCI: ECAM [mem 0xf8000000-0xfbffffff] reserved as E820 entry [ 0.361319] PCI: Using configuration type 1 for base access [ 0.361491] kprobes: kprobe jump-optimization is enabled. All kprobes are optimized if possible. [ 0.361751] ACPI: Added _OSI(Module Device) [ 0.361806] ACPI: Added _OSI(Processor Device) [ 0.361918] ACPI: Added _OSI(3.0 _SCP Extensions) [ 0.362032] ACPI: Added _OSI(Processor Aggregator Device) [ 0.368802] ACPI: 7 ACPI AML tables successfully acquired and loaded [ 0.369525] xen: registering gsi 9 triggering 0 polarity 0 [ 0.370033] ACPI: [Firmware Bug]: BIOS _OSI(Linux) query ignored [ 0.377148] ACPI: Dynamic OEM Table Load: [ 0.377267] ACPI: SSDT 0xFFFF888003937000 00083B (v01 PmRef Cpu0Cst 00003001 INTL 20100331) [ 0.377998] ACPI: Dynamic OEM Table Load: [ 0.378115] ACPI: SSDT 0xFFFF88800399E400 000303 (v01 PmRef ApIst 00003000 INTL 20100331) [ 0.378715] ACPI: Dynamic OEM Table Load: [ 0.378830] ACPI: SSDT 0xFFFF888003980A00 000119 (v01 PmRef ApCst 00003000 INTL 20100331) [ 0.379760] ACPI: _OSC evaluated successfully for all CPUs [ 0.380017] ACPI: Interpreter enabled [ 0.380144] ACPI: PM: (supports S0 S1 S3 S5) [ 0.380258] ACPI: Using IOAPIC for interrupt routing [ 0.380397] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug [ 0.380548] PCI: Using E820 reservations for host bridge windows [ 0.380891] ACPI: Enabled 10 GPEs in block 00 to 3F [ 0.389067] acpi ABCDEFGH:00: ACPI dock station (docks/bays count: 1) [ 0.391651] ACPI: \_TZ_.FN00: New power resource [ 0.391832] ACPI: \_TZ_.FN01: New power resource [ 0.392007] ACPI: \_TZ_.FN02: New power resource [ 0.392179] ACPI: \_TZ_.FN03: New power resource [ 0.392350] ACPI: \_TZ_.FN04: New power resource [ 0.393194] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-3e]) [ 0.393321] acpi PNP0A08:00: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI HPX-Type3] [ 0.393900] acpi PNP0A08:00: _OSC: platform does not support [LTR] [ 0.394572] acpi PNP0A08:00: _OSC: OS now controls [PME PCIeCapability] [ 0.394657] acpi PNP0A08:00: FADT indicates ASPM is unsupported, using BIOS configuration [ 0.395310] PCI host bridge to bus 0000:00 [ 0.395426] pci_bus 0000:00: root bus resource [io 0x0000-0x0cf7 window] [ 0.395547] pci_bus 0000:00: root bus resource [io 0x0d00-0xffff window] [ 0.395658] pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff window] [ 0.395802] pci_bus 0000:00: root bus resource [mem 0x000d0000-0x000e7fff window] [ 0.395947] pci_bus 0000:00: root bus resource [mem 0xc0000000-0xfeafffff window] [ 0.396092] pci_bus 0000:00: root bus resource [mem 0xfed40000-0xfed44fff window] [ 0.396236] pci_bus 0000:00: root bus resource [bus 00-3e] [ 0.396394] pci 0000:00:00.0: [8086:0158] type 00 class 0x060000 conventional PCI endpoint [ 0.397093] pci 0000:00:19.0: [8086:1502] type 00 class 0x020000 conventional PCI endpoint [ 0.397315] pci 0000:00:19.0: BAR 0 [mem 0xc1b00000-0xc1b1ffff] [ 0.397474] pci 0000:00:19.0: BAR 1 [mem 0xc1b70000-0xc1b70fff] [ 0.397633] pci 0000:00:19.0: BAR 2 [io 0x4040-0x405f] [ 0.398001] pci 0000:00:19.0: PME# supported from D0 D3hot D3cold [ 0.398351] pci 0000:00:1a.0: [8086:1c2d] type 00 class 0x0c0320 conventional PCI endpoint [ 0.398576] pci 0000:00:1a.0: BAR 0 [mem 0xc1b60000-0xc1b603ff] [ 0.399080] pci 0000:00:1a.0: PME# supported from D0 D3hot D3cold [ 0.399428] pci 0000:00:1c.0: [8086:1c10] type 01 class 0x060400 PCIe Root Port [ 0.399737] pci 0000:00:1c.0: PCI bridge to [bus 01] [ 0.399868] pci 0000:00:1c.0: bridge window [io 0x3000-0x3fff] [ 0.399999] pci 0000:00:1c.0: bridge window [mem 0xc1000000-0xc19fffff] [ 0.400171] pci 0000:00:1c.0: bridge window [mem 0xc1c00000-0xc25fffff 64bit pref] [ 0.400601] pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold [ 0.400750] pci 0000:00:1c.0: Enabling MPC IRBNCE [ 0.400871] pci 0000:00:1c.0: Intel PCH root port ACS workaround enabled [ 0.401222] pci 0000:00:1c.4: [8086:1c18] type 01 class 0x060400 PCIe Root Port [ 0.401527] pci 0000:00:1c.4: PCI bridge to [bus 02] [ 0.401664] pci 0000:00:1c.4: bridge window [io 0x2000-0x2fff] [ 0.401794] pci 0000:00:1c.4: bridge window [mem 0xc1a00000-0xc1afffff] [ 0.402253] pci 0000:00:1c.4: PME# supported from D0 D3hot D3cold [ 0.402461] pci 0000:00:1c.4: Enabling MPC IRBNCE [ 0.402621] pci 0000:00:1c.4: Intel PCH root port ACS workaround enabled [ 0.402866] pci 0000:00:1d.0: [8086:1c26] type 00 class 0x0c0320 conventional PCI endpoint [ 0.403086] pci 0000:00:1d.0: BAR 0 [mem 0xc1b50000-0xc1b503ff] [ 0.403626] pci 0000:00:1d.0: PME# supported from D0 D3hot D3cold [ 0.403872] pci 0000:00:1e.0: [8086:244e] type 01 class 0x060401 conventional PCI bridge [ 0.404173] pci 0000:00:1e.0: PCI bridge to [bus 03] (subtractive decode) [ 0.404321] pci 0000:00:1e.0: bridge window [mem 0xc0000000-0xc0ffffff] [ 0.404791] pci 0000:00:1f.0: [8086:1c52] type 00 class 0x060100 conventional PCI endpoint [ 0.405578] pci 0000:00:1f.2: [8086:1c02] type 00 class 0x010601 conventional PCI endpoint [ 0.405732] pci 0000:00:1f.2: BAR 0 [io 0x4090-0x4097] [ 0.405887] pci 0000:00:1f.2: BAR 1 [io 0x4080-0x4083] [ 0.406041] pci 0000:00:1f.2: BAR 2 [io 0x4070-0x4077] [ 0.406196] pci 0000:00:1f.2: BAR 3 [io 0x4060-0x4063] [ 0.406350] pci 0000:00:1f.2: BAR 4 [io 0x4020-0x403f] [ 0.406530] pci 0000:00:1f.2: BAR 5 [mem 0xc1b40000-0xc1b407ff] [ 0.406896] pci 0000:00:1f.2: PME# supported from D3hot [ 0.407204] pci 0000:00:1f.3: [8086:1c22] type 00 class 0x0c0500 conventional PCI endpoint [ 0.407449] pci 0000:00:1f.3: BAR 0 [mem 0xc1b30000-0xc1b300ff 64bit] [ 0.407692] pci 0000:00:1f.3: BAR 4 [io 0x4000-0x401f] [ 0.408187] pci 0000:00:1c.0: PCI bridge to [bus 01] [ 0.408617] pci 0000:02:00.0: [8086:10d3] type 00 class 0x020000 PCIe Endpoint [ 0.408757] pci 0000:02:00.0: BAR 0 [mem 0xc1a00000-0xc1a1ffff] [ 0.408983] pci 0000:02:00.0: BAR 2 [io 0x2000-0x201f] [ 0.409199] pci 0000:02:00.0: BAR 3 [mem 0xc1a20000-0xc1a23fff] [ 0.409810] pci 0000:02:00.0: PME# supported from D0 D3hot D3cold [ 0.410353] pci 0000:00:1c.4: PCI bridge to [bus 02] [ 0.410663] pci_bus 0000:03: extended config space not accessible [ 0.410843] pci 0000:03:02.0: [126f:0712] type 00 class 0x030000 conventional PCI endpoint [ 0.411065] pci 0000:03:02.0: BAR 0 [mem 0xc0000000-0xc0ffffff] [ 0.411463] pci 0000:03:02.0: Video device with shadowed ROM at [mem 0x000c0000-0x000dffff] [ 0.411768] pci 0000:03:02.0: supports D1 D2 [ 0.412139] pci 0000:00:1e.0: PCI bridge to [bus 03] (subtractive decode) [ 0.412307] pci 0000:00:1e.0: bridge window [io 0x0000-0x0cf7 window] (subtractive decode) [ 0.412455] pci 0000:00:1e.0: bridge window [io 0x0d00-0xffff window] (subtractive decode) [ 0.412603] pci 0000:00:1e.0: bridge window [mem 0x000a0000-0x000bffff window] (subtractive decode) [ 0.412658] pci 0000:00:1e.0: bridge window [mem 0x000d0000-0x000e7fff window] (subtractive decode) [ 0.412807] pci 0000:00:1e.0: bridge window [mem 0xc0000000-0xfeafffff window] (subtractive decode) [ 0.412955] pci 0000:00:1e.0: bridge window [mem 0xfed40000-0xfed44fff window] (subtractive decode) [ 0.413214] pci_bus 0000:00: on NUMA node 0 [ 0.413380] xen: registering gsi 13 triggering 1 polarity 0 [ 0.413887] ACPI: PCI: Interrupt link LNKA configured for IRQ 11 [ 0.414079] ACPI: PCI: Interrupt link LNKB configured for IRQ 10 [ 0.414266] ACPI: PCI: Interrupt link LNKC configured for IRQ 0 [ 0.414385] ACPI: PCI: Interrupt link LNKC disabled [ 0.414576] ACPI: PCI: Interrupt link LNKD configured for IRQ 10 [ 0.414728] ACPI: PCI: Interrupt link LNKE configured for IRQ 3 [ 0.414916] ACPI: PCI: Interrupt link LNKF configured for IRQ 11 [ 0.415102] ACPI: PCI: Interrupt link LNKG configured for IRQ 5 [ 0.415289] ACPI: PCI: Interrupt link LNKH configured for IRQ 0 [ 0.415407] ACPI: PCI: Interrupt link LNKH disabled [ 0.415850] xen:balloon: Initialising balloon driver [ 0.415983] iommu: Default domain type: Translated [ 0.415983] iommu: DMA domain TLB invalidation policy: lazy mode [ 0.416011] SCSI subsystem initialized [ 0.416675] libata version 3.00 loaded. [ 0.416694] ACPI: bus type USB registered [ 0.416820] usbcore: registered new interface driver usbfs [ 0.416944] usbcore: registered new interface driver hub [ 0.417065] usbcore: registered new device driver usb [ 0.417193] pps_core: LinuxPPS API ver. 1 registered [ 0.417308] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti [ 0.417459] PTP clock support registered [ 0.417699] Advanced Linux Sound Architecture Driver Initialized. [ 0.417995] NetLabel: Initializing [ 0.418108] NetLabel: domain hash size = 128 [ 0.418220] NetLabel: protocols = UNLABELED CIPSOv4 CALIPSO [ 0.418352] NetLabel: unlabeled traffic allowed by default [ 0.418679] PCI: Using ACPI for IRQ routing [ 0.429557] PCI: pci_cache_line_size set to 64 bytes [ 0.429706] e820: reserve RAM buffer [mem 0x0009b000-0x0009ffff] [ 0.429709] e820: reserve RAM buffer [mem 0x20065000-0x23ffffff] [ 0.429732] pci 0000:03:02.0: vgaarb: setting as boot VGA device [ 0.429800] pci 0000:03:02.0: vgaarb: bridge control possible [ 0.429918] pci 0000:03:02.0: vgaarb: VGA device added: decodes=io+mem,owns=io+mem,locks=none [ 0.430067] vgaarb: loaded [ 0.431350] clocksource: Switched to clocksource tsc-early [ 0.431532] VFS: Disk quotas dquot_6.6.0 [ 0.431650] VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes) [ 0.431650] hugetlbfs: disabling because there are no supported hugepage sizes [ 0.431650] pnp: PnP ACPI init [ 0.431650] system 00:00: [io 0x0680-0x069f] has been reserved [ 0.431650] system 00:00: [io 0xffff] has been reserved [ 0.431719] system 00:00: [io 0xffff] has been reserved [ 0.431834] system 00:00: [io 0xffff] has been reserved [ 0.431949] system 00:00: [io 0x0400-0x0453] has been reserved [ 0.431978] system 00:00: [io 0x0458-0x047f] has been reserved [ 0.431978] system 00:00: [io 0x0500-0x057f] has been reserved [ 0.431978] system 00:00: [io 0x164e-0x164f] has been reserved [ 0.431978] system 00:00: [io 0x0900-0x090f] has been reserved [ 0.431978] system 00:00: [io 0x0295-0x0296] has been reserved [ 0.432690] xen: registering gsi 8 triggering 1 polarity 0 [ 0.432752] system 00:02: [io 0x0454-0x0457] has been reserved [ 0.433190] xen: registering gsi 4 triggering 1 polarity 0 [ 0.433195] Already setup the GSI :4 [ 0.433737] system 00:04: [mem 0xfed1c000-0xfed1ffff] has been reserved [ 0.433861] system 00:04: [mem 0xfed10000-0xfed17fff] has been reserved [ 0.433981] system 00:04: [mem 0xfed18000-0xfed18fff] has been reserved [ 0.434105] system 00:04: [mem 0xfed19000-0xfed19fff] has been reserved [ 0.434224] system 00:04: [mem 0xf8000000-0xfbffffff] has been reserved [ 0.434345] system 00:04: [mem 0xfed20000-0xfed3ffff] has been reserved [ 0.434465] system 00:04: [mem 0xfed90000-0xfed93fff] could not be reserved [ 0.434587] system 00:04: [mem 0xfed45000-0xfed8ffff] has been reserved [ 0.434717] system 00:04: [mem 0xff000000-0xffffffff] could not be reserved [ 0.434839] system 00:04: [mem 0xfee00000-0xfeefffff] has been reserved [ 0.434960] system 00:04: [mem 0xc1b90000-0xc1b90fff] has been reserved [ 0.435346] system 00:05: [mem 0x00000000-0x0009cfff] could not be reserved [ 0.435516] pnp: PnP ACPI: found 6 devices [ 0.463955] PM-Timer failed consistency check (0xffffff) - aborting. [ 0.464101] NET: Registered PF_INET protocol family [ 0.464249] IP idents hash table entries: 8192 (order: 4, 65536 bytes, linear) [ 0.464560] tcp_listen_portaddr_hash hash table entries: 256 (order: 0, 4096 bytes, linear) [ 0.464725] Table-perturb hash table entries: 65536 (order: 6, 262144 bytes, linear) [ 0.464901] TCP established hash table entries: 4096 (order: 3, 32768 bytes, linear) [ 0.465076] TCP bind hash table entries: 4096 (order: 5, 131072 bytes, linear) [ 0.465242] TCP: Hash tables configured (established 4096 bind 4096) [ 0.465379] UDP hash table entries: 256 (order: 1, 8192 bytes, linear) [ 0.465501] UDP-Lite hash table entries: 256 (order: 1, 8192 bytes, linear) [ 0.465648] NET: Registered PF_UNIX/PF_LOCAL protocol family [ 0.465994] RPC: Registered named UNIX socket transport module. [ 0.466120] RPC: Registered udp transport module. [ 0.466235] RPC: Registered tcp transport module. [ 0.466347] RPC: Registered tcp-with-tls transport module. [ 0.466463] RPC: Registered tcp NFSv4.1 backchannel transport module. [ 0.466933] pci 0000:00:1c.0: PCI bridge to [bus 01] [ 0.467057] pci 0000:00:1c.0: bridge window [io 0x3000-0x3fff] [ 0.467195] pci 0000:00:1c.0: bridge window [mem 0xc1000000-0xc19fffff] [ 0.467327] pci 0000:00:1c.0: bridge window [mem 0xc1c00000-0xc25fffff 64bit pref] [ 0.467494] pci 0000:00:1c.4: PCI bridge to [bus 02] [ 0.467613] pci 0000:00:1c.4: bridge window [io 0x2000-0x2fff] [ 0.467760] pci 0000:00:1c.4: bridge window [mem 0xc1a00000-0xc1afffff] [ 0.467915] pci 0000:00:1e.0: PCI bridge to [bus 03] [ 0.468048] pci 0000:00:1e.0: bridge window [mem 0xc0000000-0xc0ffffff] [ 0.468202] pci_bus 0000:00: resource 4 [io 0x0000-0x0cf7 window] [ 0.468325] pci_bus 0000:00: resource 5 [io 0x0d00-0xffff window] [ 0.468444] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff window] [ 0.468564] pci_bus 0000:00: resource 7 [mem 0x000d0000-0x000e7fff window] [ 0.468694] pci_bus 0000:00: resource 8 [mem 0xc0000000-0xfeafffff window] [ 0.468815] pci_bus 0000:00: resource 9 [mem 0xfed40000-0xfed44fff window] [ 0.468965] pci_bus 0000:01: resource 0 [io 0x3000-0x3fff] [ 0.469081] pci_bus 0000:01: resource 1 [mem 0xc1000000-0xc19fffff] [ 0.469200] pci_bus 0000:01: resource 2 [mem 0xc1c00000-0xc25fffff 64bit pref] [ 0.469343] pci_bus 0000:02: resource 0 [io 0x2000-0x2fff] [ 0.469459] pci_bus 0000:02: resource 1 [mem 0xc1a00000-0xc1afffff] [ 0.469579] pci_bus 0000:03: resource 1 [mem 0xc0000000-0xc0ffffff] [ 0.469705] pci_bus 0000:03: resource 4 [io 0x0000-0x0cf7 window] [ 0.469824] pci_bus 0000:03: resource 5 [io 0x0d00-0xffff window] [ 0.469942] pci_bus 0000:03: resource 6 [mem 0x000a0000-0x000bffff window] [ 0.470063] pci_bus 0000:03: resource 7 [mem 0x000d0000-0x000e7fff window] [ 0.470183] pci_bus 0000:03: resource 8 [mem 0xc0000000-0xfeafffff window] [ 0.470302] pci_bus 0000:03: resource 9 [mem 0xfed40000-0xfed44fff window] [ 0.470539] xen: registering gsi 22 triggering 0 polarity 1 [ 0.470563] xen: --> pirq=22 -> irq=22 (gsi=22) [ 0.492773] pci 0000:00:1a.0: quirk_usb_early_handoff+0x0/0x7c0 took 21766 usecs [ 0.492997] xen: registering gsi 20 triggering 0 polarity 1 [ 0.493020] xen: --> pirq=20 -> irq=20 (gsi=20) [ 0.514772] pci 0000:00:1d.0: quirk_usb_early_handoff+0x0/0x7c0 took 21309 usecs [ 0.514976] PCI: CLS 64 bytes, default 64 [ 0.515125] PCI-DMA: Using software bounce buffering for IO (SWIOTLB) [ 0.515244] software IO TLB: mapped [mem 0x000000001b180000-0x000000001f180000] (64MB) [ 0.515293] Unpacking initramfs... [ 0.515448] kvm_intel: VMX not supported by CPU 1 [ 0.515616] kvm_amd: CPU 1 isn't AMD or Hygon [ 0.515744] clocksource: tsc: mask: 0xffffffffffffffff max_cycles: 0x2c955c383c9, max_idle_ns: 440795294255 ns [ 0.516000] clocksource: Switched to clocksource tsc [ 0.518393] Initialise system trusted keyrings [ 0.518681] workingset: timestamp_bits=62 max_order=17 bucket_order=0 [ 0.518987] NFS: Registering the id_resolver key type [ 0.519113] Key type id_resolver registered [ 0.519224] Key type id_legacy registered [ 0.519396] 9p: Installing v9fs 9p2000 file system support [ 0.536118] Key type asymmetric registered [ 0.536244] Asymmetric key parser 'x509' registered [ 0.536385] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 251) [ 0.536540] io scheduler mq-deadline registered [ 0.536666] io scheduler kyber registered [ 0.537096] xen: registering gsi 16 triggering 0 polarity 1 [ 0.537136] xen: --> pirq=16 -> irq=16 (gsi=16) [ 0.537363] pcieport 0000:00:1c.0: PME: Signaling with IRQ 50 [ 0.537758] xen: registering gsi 16 triggering 0 polarity 1 [ 0.537763] Already setup the GSI :16 [ 0.538096] pcieport 0000:00:1c.4: PME: Signaling with IRQ 51 [ 0.538523] input: Sleep Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0E:00/input/input0 [ 0.538779] ACPI: button: Sleep Button [SLPB] [ 0.538923] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input1 [ 0.539186] ACPI: button: Power Button [PWRF] [ 0.539725] Monitor-Mwait will be used to enter C-1 state [ 0.539768] Monitor-Mwait will be used to enter C-3 state [ 0.539786] ACPI: \_PR_.CPU0: Found 2 idle states [ 0.540162] ACPI: \_PR_.CPU1: Found 2 idle states [ 0.540478] ACPI: \_PR_.CPU2: Found 2 idle states [ 0.540861] ACPI: \_PR_.CPU3: Found 2 idle states [ 0.541561] thermal LNXTHERM:00: registered as thermal_zone0 [ 0.541696] ACPI: thermal: Thermal Zone [TZ00] (28 C) [ 0.542010] thermal LNXTHERM:01: registered as thermal_zone1 [ 0.542131] ACPI: thermal: Thermal Zone [TZ01] (30 C) [ 0.542533] xen:xen_evtchn: Event-channel device installed [ 0.542763] xen_pciback: backend is vpci [ 0.543521] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled [ 0.544343] hpet_acpi_add: no address or irqs in _CRS [ 0.544527] Non-volatile memory driver v1.3 [ 0.546418] loop: module loaded [ 0.551299] ahci 0000:00:1f.2: version 3.0 [ 0.551412] xen: registering gsi 21 triggering 0 polarity 1 [ 0.551441] xen: --> pirq=21 -> irq=21 (gsi=21) [ 0.561781] ahci 0000:00:1f.2: AHCI vers 0001.0300, 32 command slots, 3 Gbps, SATA mode [ 0.561940] ahci 0000:00:1f.2: 6/6 ports implemented (port mask 0x3f) [ 0.563676] ahci 0000:00:1f.2: flags: 64bit ncq sntf pm led clo pio slum part ems apst [ 0.579417] scsi host0: ahci [ 0.579912] scsi host1: ahci [ 0.580335] scsi host2: ahci [ 0.580652] scsi host3: ahci [ 0.580966] scsi host4: ahci [ 0.581277] scsi host5: ahci [ 0.581421] ata1: SATA max UDMA/133 abar m2048@0xc1b40000 port 0xc1b40100 irq 53 lpm-pol 0 [ 0.581570] ata2: SATA max UDMA/133 abar m2048@0xc1b40000 port 0xc1b40180 irq 53 lpm-pol 0 [ 0.581732] ata3: SATA max UDMA/133 abar m2048@0xc1b40000 port 0xc1b40200 irq 53 lpm-pol 0 [ 0.581880] ata4: SATA max UDMA/133 abar m2048@0xc1b40000 port 0xc1b40280 irq 53 lpm-pol 0 [ 0.582026] ata5: SATA max UDMA/133 abar m2048@0xc1b40000 port 0xc1b40300 irq 53 lpm-pol 0 [ 0.582171] ata6: SATA max UDMA/133 abar m2048@0xc1b40000 port 0xc1b40380 irq 53 lpm-pol 0 [ 0.582527] tun: Universal TUN/TAP device driver, 1.6 [ 0.582736] e100: Intel(R) PRO/100 Network Driver [ 0.582852] e100: Copyright(c) 1999-2006 Intel Corporation [ 0.582976] sky2: driver version 1.30 [ 0.583109] xen_netfront: Initialising Xen virtual ethernet driver [ 0.583376] usbcore: registered new interface driver usblp [ 0.583501] usbcore: registered new interface driver usb-storage [ 0.583671] i8042: PNP: No PS/2 controller found. [ 0.583701] xen: registering gsi 22 triggering 0 polarity 1 [ 0.583803] Already setup the GSI :22 [ 0.583929] rtc_cmos 00:01: RTC can wake from S4 [ 0.583992] ehci-pci 0000:00:1a.0: EHCI Host Controller [ 0.584209] xen: registering gsi 20 triggering 0 polarity 1 [ 0.584214] Already setup the GSI :20 [ 0.584388] ehci-pci 0000:00:1a.0: new USB bus registered, assigned bus number 1 [ 0.584564] ehci-pci 0000:00:1a.0: debug port 2 [ 0.584645] rtc_cmos 00:01: registered as rtc0 [ 0.584853] rtc_cmos 00:01: alarms up to one month, y3k, 242 bytes nvram [ 0.585022] device-mapper: uevent: version 1.0.3 [ 0.585226] device-mapper: ioctl: 4.48.0-ioctl (2023-03-01) initialised: dm-devel@lists.linux.dev [ 0.585395] intel_pstate: CPU model not supported [ 0.585534] hid: raw HID events driver (C) Jiri Kosina [ 0.585775] usbcore: registered new interface driver usbhid [ 0.585906] usbhid: USB HID core driver [ 0.586342] Initializing XFRM netlink socket [ 0.586511] NET: Registered PF_INET6 protocol family [ 0.588821] ehci-pci 0000:00:1a.0: irq 22, io mem 0xc1b60000 [ 0.588870] xen: registering gsi 22 triggering 0 polarity 1 [ 0.588946] Already setup the GSI :22 [ 0.589111] Segment Routing with IPv6 [ 0.589138] i801_smbus 0000:00:1f.3: SMBus using PCI interrupt [ 0.589237] In-situ OAM (IOAM) with IPv6 [ 0.589486] sit: IPv6, IPv4 and MPLS over IPv4 tunneling driver [ 0.589743] NET: Registered PF_PACKET protocol family [ 0.589888] 9pnet: Installing 9P2000 support [ 0.590027] Key type dns_resolver registered [ 0.591083] i2c i2c-0: Successfully instantiated SPD at 0x51 [ 0.593889] IPI shorthand broadcast: enabled [ 0.595658] ehci-pci 0000:00:1a.0: USB 2.0 started, EHCI 1.00 [ 0.596077] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 6.10 [ 0.596226] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 0.596239] sched_clock: Marking stable (568006284, 27625779)->(601243604, -5611541) [ 0.596369] usb usb1: Product: EHCI Host Controller [ 0.596651] usb usb1: Manufacturer: Linux 6.10.0-rc4+ ehci_hcd [ 0.596773] usb usb1: SerialNumber: 0000:00:1a.0 [ 0.596871] Timer migration: 1 hierarchy levels; 8 children per group; 1 crossnode level [ 0.597059] hub 1-0:1.0: USB hub found [ 0.597213] hub 1-0:1.0: 2 ports detected [ 0.597552] ehci-pci 0000:00:1d.0: EHCI Host Controller [ 0.597568] registered taskstats version 1 [ 0.597753] ehci-pci 0000:00:1d.0: new USB bus registered, assigned bus number 2 [ 0.597801] Loading compiled-in X.509 certificates [ 0.597844] ehci-pci 0000:00:1d.0: debug port 2 [ 0.599077] PM: Magic number: 12:3:107 [ 0.599212] ata_device dev3.0: hash matches [ 0.599338] dev3.0: hash matches [ 0.599465] bdi 43:320: hash matches [ 0.599666] printk: legacy console [netcon0] enabled [ 0.599797] netconsole: network logging started [ 0.600121] cfg80211: Loading compiled-in X.509 certificates for regulatory database [ 0.602167] ehci-pci 0000:00:1d.0: irq 20, io mem 0xc1b50000 [ 0.608658] ehci-pci 0000:00:1d.0: USB 2.0 started, EHCI 1.00 [ 0.609168] usb usb2: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 6.10 [ 0.609321] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 0.609465] usb usb2: Product: EHCI Host Controller [ 0.609579] usb usb2: Manufacturer: Linux 6.10.0-rc4+ ehci_hcd [ 0.609715] usb usb2: SerialNumber: 0000:00:1d.0 [ 0.610013] hub 2-0:1.0: USB hub found [ 0.610160] hub 2-0:1.0: 2 ports detected [ 0.612270] Freeing initrd memory: 20120K [ 0.623870] Loaded X.509 cert 'sforshee: 00b28ddf47aef9cea7' [ 0.624183] Loaded X.509 cert 'wens: 61c038651aabdcf94bd0ac7ff06c7248db18c600' [ 0.624347] ALSA device list: [ 0.624457] No soundcards found. [ 0.625093] cfg80211: loaded regulatory.db is malformed or signature is missing/invalid [ 0.836710] usb 1-1: new high-speed USB device number 2 using ehci-pci [ 0.852714] usb 2-1: new high-speed USB device number 2 using ehci-pci [ 0.889368] ata6: SATA link down (SStatus 0 SControl 300) [ 0.889510] ata4: SATA link down (SStatus 0 SControl 300) [ 0.889666] ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300) [ 0.889808] ata5: SATA link down (SStatus 0 SControl 300) [ 0.889947] ata3: SATA link up 1.5 Gbps (SStatus 113 SControl 300) [ 0.891148] ata1.00: ATA-8: WDC WD1003FBYZ-010FB0, 01.01V03, max UDMA/133 [ 0.891906] ata1.00: 1953525168 sectors, multi 16: LBA48 NCQ (depth 32), AA [ 0.893743] ata3.00: ATAPI: Slimtype DVD A DS8ABSH, AP52, max UDMA/100 [ 0.893998] ata1.00: configured for UDMA/133 [ 0.894266] scsi 0:0:0:0: Direct-Access ATA WDC WD1003FBYZ-0 1V03 PQ: 0 ANSI: 5 [ 0.895224] sd 0:0:0:0: Attached scsi generic sg0 type 0 [ 0.895261] sd 0:0:0:0: [sda] 1953525168 512-byte logical blocks: (1.00 TB/932 GiB) [ 0.895518] sd 0:0:0:0: [sda] Write Protect is off [ 0.895653] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00 [ 0.895717] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 0.895980] sd 0:0:0:0: [sda] Preferred minimum I/O size 512 bytes [ 0.897163] ata2: SATA link down (SStatus 0 SControl 300) [ 0.900171] ata3.00: configured for UDMA/100 [ 0.913083] scsi 2:0:0:0: CD-ROM Slimtype DVD A DS8ABSH AP52 PQ: 0 ANSI: 5 [ 0.918572] sda: sda1 sda2 < sda5 > [ 0.919177] sd 0:0:0:0: [sda] Attached SCSI disk [ 0.940386] sr 2:0:0:0: [sr0] scsi3-mmc drive: 24x/24x writer dvd-ram cd/rw xa/form2 cdda tray [ 0.940541] cdrom: Uniform CD-ROM driver Revision: 3.20 [ 0.955494] sr 2:0:0:0: Attached scsi CD-ROM sr0 [ 0.955657] sr 2:0:0:0: Attached scsi generic sg1 type 5 [ 0.957649] Freeing unused kernel image (initmem) memory: 2680K [ 0.957786] Write protecting the kernel read-only data: 24576k [ 0.965172] usb 1-1: New USB device found, idVendor=8087, idProduct=0024, bcdDevice= 0.00 [ 0.965325] usb 1-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0 [ 0.965705] hub 1-1:1.0: USB hub found [ 0.965930] hub 1-1:1.0: 6 ports detected [ 0.980809] Freeing unused kernel image (rodata/data gap) memory: 2028K [ 0.981994] usb 2-1: New USB device found, idVendor=8087, idProduct=0024, bcdDevice= 0.00 [ 0.982145] usb 2-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0 [ 0.982527] hub 2-1:1.0: USB hub found [ 0.982744] hub 2-1:1.0: 6 ports detected [ 1.153379] x86/mm: Checked W+X mappings: passed, no W+X pages found. [ 1.153504] Run /init as init process [ 1.153615] with arguments: [ 1.153616] /init [ 1.153617] placeholder [ 1.153618] with environment: [ 1.153619] HOME=/ [ 1.153620] TERM=linux [ 1.495643] e1000e: Intel(R) PRO/1000 Network Driver [ 1.495771] e1000e: Copyright(c) 1999 - 2015 Intel Corporation. [ 1.495990] xen: registering gsi 19 triggering 0 polarity 1 [ 1.496754] xen: --> pirq=19 -> irq=19 (gsi=19) [ 1.497014] e1000e 0000:00:19.0: Interrupt Throttling Rate (ints/sec) set to dynamic conservative mode [ 1.606228] e1000e 0000:00:19.0 0000:00:19.0 (uninitialized): registered PHC clock [ 1.704111] e1000e 0000:00:19.0 eth0: (PCI Express:2.5GT/s:Width x1) 00:1e:67:96:a4:17 [ 1.704266] e1000e 0000:00:19.0 eth0: Intel(R) PRO/1000 Network Connection [ 1.704434] e1000e 0000:00:19.0 eth0: MAC: 10, PHY: 11, PBA No: 0050FF-0FF [ 1.704692] xen: registering gsi 16 triggering 0 polarity 1 [ 1.704700] Already setup the GSI :16 [ 1.705136] e1000e 0000:02:00.0: Interrupt Throttling Rate (ints/sec) set to dynamic conservative mode [ 1.748704] e1000e 0000:02:00.0 0000:02:00.0 (uninitialized): registered PHC clock [ 1.795157] e1000e 0000:02:00.0 eth1: (PCI Express:2.5GT/s:Width x1) 00:1e:67:96:a4:16 [ 1.795311] e1000e 0000:02:00.0 eth1: Intel(R) PRO/1000 Network Connection [ 1.795517] e1000e 0000:02:00.0 eth1: MAC: 3, PHY: 8, PBA No: 1000FF-0FF [ 1.797533] e1000e 0000:00:19.0 enx001e6796a417: renamed from eth0 [ 1.798137] e1000e 0000:02:00.0 enx001e6796a416: renamed from eth1 [ 1.922654] random: crng init done [ 2.624762] EXT4-fs (dm-0): mounting ext3 file system using the ext4 subsystem [ 2.629717] EXT4-fs (dm-0): mounted filesystem 16644732-beab-44c3-b8ee-4108ee96bc57 ro with ordered data mode. Quota mode: none. [ 6.237212] EXT4-fs (dm-0): re-mounted 16644732-beab-44c3-b8ee-4108ee96bc57 r/w. Quota mode: none. [ 7.962847] EXT4-fs (sda1): mounting ext3 file system using the ext4 subsystem [ 7.987068] EXT4-fs (sda1): mounted filesystem c6917538-c529-42a6-9623-6c9931313c50 r/w with ordered data mode. Quota mode: none. [ 8.071608] Adding 1949692k swap on /dev/mapper/italia0--vg-swap_1. Priority:-2 extents:1 across:1949692k [ 9.934078] xenbr0: port 1(enx001e6796a416) entered blocking state [ 9.934226] xenbr0: port 1(enx001e6796a416) entered disabled state [ 9.934356] e1000e 0000:02:00.0 enx001e6796a416: entered allmulticast mode [ 9.934512] e1000e 0000:02:00.0 enx001e6796a416: entered promiscuous mode [ 12.359491] e1000e 0000:02:00.0 enx001e6796a416: NIC Link is Up 1000 Mbps Full Duplex, Flow Control: None [ 12.360070] xenbr0: port 1(enx001e6796a416) entered blocking state [ 12.360193] xenbr0: port 1(enx001e6796a416) entered forwarding state