[ 0.000000] Linux version 6.10.0-rc4+ (osstest@himrod1) (gcc (Debian 12.2.0-14) 12.2.0, GNU ld (GNU Binutils for Debian) 2.40) #1 SMP PREEMPT_DYNAMIC Sun Jun 23 16:53:02 UTC 2024 [ 0.000000] Command line: placeholder root=/dev/mapper/pinot1--vg-root ro console=hvc0 [ 0.000000] [Firmware Bug]: TSC doesn't count with P0 frequency! [ 0.000000] BIOS-provided physical RAM map: [ 0.000000] BIOS-e820: [mem 0x0000000000000000-0x0000000000099fff] usable [ 0.000000] BIOS-e820: [mem 0x000000000009a800-0x00000000000fffff] reserved [ 0.000000] BIOS-e820: [mem 0x0000000000100000-0x0000000040065eff] usable [ 0.000000] BIOS-e820: [mem 0x0000000040065f00-0x0000000040065f97] ACPI data [ 0.000000] BIOS-e820: [mem 0x0000000040066000-0x00000000dfe8ffff] usable [ 0.000000] BIOS-e820: [mem 0x00000000dfe9e000-0x00000000dfe9ffff] type 9 [ 0.000000] BIOS-e820: [mem 0x00000000dfea0000-0x00000000dfeb1fff] ACPI data [ 0.000000] BIOS-e820: [mem 0x00000000dfeb2000-0x00000000dfedffff] ACPI NVS [ 0.000000] BIOS-e820: [mem 0x00000000dfee0000-0x00000000efffffff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000ffe00000-0x00000000ffffffff] reserved [ 0.000000] BIOS-e820: [mem 0x0000000100000000-0x000000021effffff] usable [ 0.000000] NX (Execute Disable) protection: active [ 0.000000] APIC: Static calls initialized [ 0.000000] SMBIOS 2.6 present. [ 0.000000] DMI: Supermicro H8SML/H8SML, BIOS 3.5 11/25/2013 [ 0.000000] DMI: Memory slots populated: 2/4 [ 0.000000] Hypervisor detected: Xen HVM [ 0.000000] Xen version 4.19. [ 0.000009] HVMOP_pagetable_dying not supported [ 0.088717] tsc: Fast TSC calibration failed [ 0.088719] tsc: Detected 2800.014 MHz processor [ 0.094410] e820: update [mem 0x00000000-0x00000fff] usable ==> reserved [ 0.094415] e820: remove [mem 0x000a0000-0x000fffff] usable [ 0.094422] last_pfn = 0x21f000 max_arch_pfn = 0x400000000 [ 0.094540] MTRR map: 5 entries (3 fixed + 2 variable; max 20), built from 9 variable MTRRs [ 0.094543] x86/PAT: Configuration [0-7]: WB WC UC- UC WB WP UC- WT [ 0.103339] e820: update [mem 0xe0000000-0xffffffff] usable ==> reserved [ 0.103353] last_pfn = 0xdfe90 max_arch_pfn = 0x400000000 [ 0.109041] found SMP MP-table at [mem 0x000ff780-0x000ff78f] [ 0.109072] Using GB pages for direct mapping [ 0.109634] RAMDISK: [mem 0x03430000-0x047e7fff] [ 0.109645] ACPI: Early table checksum verification disabled [ 0.109650] ACPI: RSDP 0x0000000040065F00 000024 (v02 ACPIAM) [ 0.109656] ACPI: XSDT 0x0000000040065F24 000044 (v01 SMCI 20131125 MSFT 00000097) [ 0.109663] ACPI: APIC 0x0000000040065F68 000098 (v01 112513 APIC1100 20131125 MSFT 00000097) [ 0.109670] ACPI: FACP 0x00000000DFEA0290 0000F4 (v03 112513 FACP1100 20131125 MSFT 00000097) [ 0.109712] ACPI BIOS Warning (bug): 32/64X length mismatch in FADT/Gpe0Block: 64/32 (20240322/tbfadt-560) [ 0.109718] ACPI: DSDT 0x00000000DFEA0600 00562B (v01 1CF11 1CF11000 00000000 INTL 20051117) [ 0.109723] ACPI: FACS 0x00000000DFEB2000 000040 [ 0.109728] ACPI: FACS 0x00000000DFEB2000 000040 [ 0.109732] ACPI: MCFG 0x00000000DFEA0440 00003C (v01 112513 OEMMCFG 20131125 MSFT 00000097) [ 0.109738] ACPI: SSDT 0x00000000DFEAA6F0 000B9C (v01 A M I POWERNOW 00000001 AMD 00000001) [ 0.109741] ACPI: Reserving APIC table memory at [mem 0x40065f68-0x40065fff] [ 0.109743] ACPI: Reserving FACP table memory at [mem 0xdfea0290-0xdfea0383] [ 0.109745] ACPI: Reserving DSDT table memory at [mem 0xdfea0600-0xdfea5c2a] [ 0.109746] ACPI: Reserving FACS table memory at [mem 0xdfeb2000-0xdfeb203f] [ 0.109748] ACPI: Reserving FACS table memory at [mem 0xdfeb2000-0xdfeb203f] [ 0.109749] ACPI: Reserving MCFG table memory at [mem 0xdfea0440-0xdfea047b] [ 0.109750] ACPI: Reserving SSDT table memory at [mem 0xdfeaa6f0-0xdfeab28b] [ 0.109836] Zone ranges: [ 0.109837] DMA [mem 0x0000000000001000-0x0000000000ffffff] [ 0.109840] DMA32 [mem 0x0000000001000000-0x00000000ffffffff] [ 0.109842] Normal [mem 0x0000000100000000-0x000000021effffff] [ 0.109844] Movable zone start for each node [ 0.109845] Early memory node ranges [ 0.109846] node 0: [mem 0x0000000000001000-0x0000000000099fff] [ 0.109848] node 0: [mem 0x0000000000100000-0x0000000040064fff] [ 0.109849] node 0: [mem 0x0000000040066000-0x00000000dfe8ffff] [ 0.109851] node 0: [mem 0x0000000100000000-0x000000021effffff] [ 0.109853] Initmem setup node 0 [mem 0x0000000000001000-0x000000021effffff] [ 0.109864] On node 0, zone DMA: 1 pages in unavailable ranges [ 0.109936] On node 0, zone DMA: 102 pages in unavailable ranges [ 0.131677] On node 0, zone DMA32: 1 pages in unavailable ranges [ 0.160146] On node 0, zone Normal: 368 pages in unavailable ranges [ 0.160277] On node 0, zone Normal: 4096 pages in unavailable ranges [ 0.160800] ACPI: PM-Timer IO Port: 0x808 [ 0.160931] IOAPIC[0]: apic_id 0, version 17, address 0xfec00000, GSI 0-23 [ 0.161010] IOAPIC[1]: apic_id 1, version 17, address 0xfec20000, GSI 24-55 [ 0.161014] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl) [ 0.161017] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 low level) [ 0.161022] ACPI: Using ACPI (MADT) for SMP configuration information [ 0.161032] CPU topo: Max. logical packages: 1 [ 0.161033] CPU topo: Max. logical dies: 1 [ 0.161034] CPU topo: Max. dies per package: 1 [ 0.161041] CPU topo: Max. threads per core: 1 [ 0.161042] CPU topo: Num. cores per package: 4 [ 0.161043] CPU topo: Num. threads per package: 4 [ 0.161044] CPU topo: Allowing 4 present CPUs plus 0 hotplug CPUs [ 0.161063] PM: hibernation: Registered nosave memory: [mem 0x00000000-0x00000fff] [ 0.161066] PM: hibernation: Registered nosave memory: [mem 0x0009a000-0x0009afff] [ 0.161067] PM: hibernation: Registered nosave memory: [mem 0x0009b000-0x000fffff] [ 0.161069] PM: hibernation: Registered nosave memory: [mem 0x40065000-0x40065fff] [ 0.161071] PM: hibernation: Registered nosave memory: [mem 0x40065000-0x40065fff] [ 0.161072] PM: hibernation: Registered nosave memory: [mem 0xdfe90000-0xdfe9dfff] [ 0.161074] PM: hibernation: Registered nosave memory: [mem 0xdfe9e000-0xdfe9ffff] [ 0.161075] PM: hibernation: Registered nosave memory: [mem 0xdfea0000-0xdfeb1fff] [ 0.161076] PM: hibernation: Registered nosave memory: [mem 0xdfeb2000-0xdfedffff] [ 0.161077] PM: hibernation: Registered nosave memory: [mem 0xdfee0000-0xefffffff] [ 0.161078] PM: hibernation: Registered nosave memory: [mem 0xf0000000-0xffdfffff] [ 0.161080] PM: hibernation: Registered nosave memory: [mem 0xffe00000-0xffffffff] [ 0.161082] [mem 0xf0000000-0xffdfffff] available for PCI devices [ 0.161101] Booting kernel on Xen PVH [ 0.161102] Xen version: 4.19-unstable [ 0.161106] clocksource: refined-jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 1910969940391419 ns [ 0.167551] setup_percpu: NR_CPUS:64 nr_cpumask_bits:4 nr_cpu_ids:4 nr_node_ids:1 [ 0.168453] percpu: Embedded 57 pages/cpu s194408 r8192 d30872 u524288 [ 0.168461] pcpu-alloc: s194408 r8192 d30872 u524288 alloc=1*2097152 [ 0.168466] pcpu-alloc: [0] 0 1 2 3 [ 0.168527] xen: PV spinlocks enabled [ 0.168531] PV qspinlock hash table entries: 256 (order: 0, 4096 bytes, linear) [ 0.168534] Kernel command line: placeholder root=/dev/mapper/pinot1--vg-root ro console=hvc0 [ 0.168606] Unknown kernel command line parameters "placeholder", will be passed to user space. [ 0.168992] Dentry cache hash table entries: 131072 (order: 8, 1048576 bytes, linear) [ 0.169175] Inode-cache hash table entries: 65536 (order: 7, 524288 bytes, linear) [ 0.169233] Built 1 zonelists, mobility grouping on. Total pages: 2092584 [ 0.169237] mem auto-init: stack:all(zero), heap alloc:off, heap free:off [ 0.169244] software IO TLB: area num 4. [ 0.278353] Memory: 790696K/8370336K available (16384K kernel code, 2753K rwdata, 6164K rodata, 2680K init, 1864K bss, 7579384K reserved, 0K cma-reserved) [ 0.278413] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1 [ 0.280320] Dynamic Preempt: voluntary [ 0.280376] rcu: Preemptible hierarchical RCU implementation. [ 0.280377] rcu: RCU event tracing is enabled. [ 0.280378] rcu: RCU restricting CPUs from NR_CPUS=64 to nr_cpu_ids=4. [ 0.280381] Trampoline variant of Tasks RCU enabled. [ 0.280383] rcu: RCU calculated value of scheduler-enlistment delay is 100 jiffies. [ 0.280384] rcu: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=4 [ 0.280398] RCU Tasks: Setting shift to 2 and lim to 1 rcu_task_cb_adjust=1. [ 0.282885] Using NULL legacy PIC [ 0.282887] NR_IRQS: 4352, nr_irqs: 1000, preallocated irqs: 0 [ 0.282955] xen:events: Using FIFO-based ABI [ 0.283008] xen:events: Xen HVM callback vector for event delivery is enabled [ 0.283064] rcu: srcu_init: Setting srcu_struct sizes based on contention. [ 0.289240] Console: colour VGA+ 80x25 [ 0.289244] printk: legacy console [tty0] enabled [ 0.301780] printk: legacy console [hvc0] enabled [ 0.306064] ACPI: Core revision 20240322 [ 0.309730] Failed to register legacy timer interrupt [ 0.309854] APIC: Switch to symmetric I/O mode setup [ 0.311672] x2apic enabled [ 0.313765] APIC: Switched APIC routing to: physical x2apic [ 0.314091] clocksource: tsc-early: mask: 0xffffffffffffffff max_cycles: 0x285c4e01e32, max_idle_ns: 440795295954 ns [ 0.314362] Calibrating delay loop (skipped), value calculated using timer frequency.. 5600.02 BogoMIPS (lpj=2800014) [ 0.314871] Last level iTLB entries: 4KB 512, 2MB 1024, 4MB 512 [ 0.315005] Last level dTLB entries: 4KB 1024, 2MB 1024, 4MB 512, 1GB 0 [ 0.315145] Spectre V1 : Mitigation: usercopy/swapgs barriers and __user pointer sanitization [ 0.315327] Spectre V2 : Mitigation: Retpolines [ 0.315355] Spectre V2 : Spectre v2 / SpectreRSB mitigation: Filling RSB on context switch [ 0.315355] Spectre V2 : Spectre v2 / SpectreRSB : Filling RSB on VMEXIT [ 0.315355] Spectre V2 : Enabling Speculation Barrier for firmware calls [ 0.315355] RETBleed: Mitigation: untrained return thunk [ 0.315355] Spectre V2 : mitigation: Enabling conditional Indirect Branch Prediction Barrier [ 0.315355] Speculative Store Bypass: Mitigation: Speculative Store Bypass disabled via prctl [ 0.315355] x86/fpu: Supporting XSAVE feature 0x001: 'x87 floating point registers' [ 0.315355] x86/fpu: Supporting XSAVE feature 0x002: 'SSE registers' [ 0.315355] x86/fpu: Supporting XSAVE feature 0x004: 'AVX registers' [ 0.315355] x86/fpu: xstate_offset[2]: 576, xstate_sizes[2]: 256 [ 0.315355] x86/fpu: Enabled xstate features 0x7, context size is 832 bytes, using 'standard' format. [ 0.315355] Freeing SMP alternatives memory: 40K [ 0.315355] pid_max: default: 32768 minimum: 301 [ 0.315355] LSM: initializing lsm=capability,selinux [ 0.315355] SELinux: Initializing. [ 0.315355] Mount-cache hash table entries: 2048 (order: 2, 16384 bytes, linear) [ 0.315355] Mountpoint-cache hash table entries: 2048 (order: 2, 16384 bytes, linear) [ 0.315355] clocksource: xen: mask: 0xffffffffffffffff max_cycles: 0x1cd42e4dffb, max_idle_ns: 881590591483 ns [ 0.315355] Xen: using vcpuop timer interface [ 0.315355] installing Xen timer for CPU 0 [ 0.315355] smpboot: CPU0: AMD Opteron(tm) Processor 3350 HE (family: 0x15, model: 0x2, stepping: 0x0) [ 0.315355] cpu 0 spinlock event irq 28 [ 0.315355] Performance Events: PMU not available due to virtualization, using software events only. [ 0.315355] signal: max sigframe size: 1776 [ 0.315411] rcu: Hierarchical SRCU implementation. [ 0.315536] rcu: Max phase no-delay instances is 400. [ 0.320272] smp: Bringing up secondary CPUs ... [ 0.320522] installing Xen timer for CPU 1 [ 0.320783] smpboot: x86: Booting SMP configuration: [ 0.320908] .... node #0, CPUs: #1 [ 0.322622] installing Xen timer for CPU 2 [ 0.323039] #2 [ 0.325087] installing Xen timer for CPU 3 [ 0.326492] #3 [ 0.329447] cpu 1 spinlock event irq 41 [ 0.331603] cpu 2 spinlock event irq 42 [ 0.333672] cpu 3 spinlock event irq 43 [ 0.334717] smp: Brought up 1 node, 4 CPUs [ 0.334848] smpboot: Total of 4 processors activated (22400.11 BogoMIPS) [ 0.336466] devtmpfs: initialized [ 0.336529] x86/mm: Memory block size: 128MB [ 0.339526] ACPI: PM: Registering ACPI NVS region [mem 0xdfeb2000-0xdfedffff] (188416 bytes) [ 0.340468] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 1911260446275000 ns [ 0.340716] futex hash table entries: 1024 (order: 4, 65536 bytes, linear) [ 0.340992] PM: RTC time: 17:10:00, date: 2024-06-23 [ 0.341481] NET: Registered PF_NETLINK/PF_ROUTE protocol family [ 0.341681] xen:grant_table: Grant tables using version 1 layout [ 0.341857] Grant table initialized [ 0.342212] audit: initializing netlink subsys (disabled) [ 0.342449] audit: type=2000 audit(1719162600.830:1): state=initialized audit_enabled=0 res=1 [ 0.344458] thermal_sys: Registered thermal governor 'step_wise' [ 0.344460] thermal_sys: Registered thermal governor 'user_space' [ 0.344658] cpuidle: using governor menu [ 0.346761] PCI: ECAM [mem 0xe0000000-0xefffffff] (base 0xe0000000) for domain 0000 [bus 00-ff] [ 0.346954] PCI: ECAM [mem 0xe0000000-0xefffffff] reserved as E820 entry [ 0.347125] PCI: Using configuration type 1 for base access [ 0.347436] kprobes: kprobe jump-optimization is enabled. All kprobes are optimized if possible. [ 0.348798] HugeTLB: registered 1.00 GiB page size, pre-allocated 0 pages [ 0.349371] HugeTLB: 16380 KiB vmemmap can be freed for a 1.00 GiB page [ 0.349516] HugeTLB: registered 2.00 MiB page size, pre-allocated 0 pages [ 0.349654] HugeTLB: 28 KiB vmemmap can be freed for a 2.00 MiB page [ 0.350411] ACPI: Added _OSI(Module Device) [ 0.350522] ACPI: Added _OSI(Processor Device) [ 0.350645] ACPI: Added _OSI(3.0 _SCP Extensions) [ 0.350770] ACPI: Added _OSI(Processor Aggregator Device) [ 0.355355] ACPI: 2 ACPI AML tables successfully acquired and loaded [ 0.359563] ACPI: _OSC evaluation for CPUs failed, trying _PDC [ 0.359973] ACPI: Interpreter enabled [ 0.360120] ACPI: PM: (supports S0 S1 S4 S5) [ 0.360368] ACPI: Using IOAPIC for interrupt routing [ 0.360558] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug [ 0.360751] PCI: Using E820 reservations for host bridge windows [ 0.361122] ACPI: Enabled 4 GPEs in block 00 to 1F [ 0.372703] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff]) [ 0.372885] acpi PNP0A08:00: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI HPX-Type3] [ 0.373099] acpi PNP0A08:00: _OSC: OS requested [PME PCIeCapability LTR] [ 0.373248] acpi PNP0A08:00: _OSC: platform willing to grant [PME PCIeCapability LTR] [ 0.373367] acpi PNP0A08:00: _OSC: platform retains control of PCIe features (AE_NOT_FOUND) [ 0.373857] PCI host bridge to bus 0000:00 [ 0.374005] pci_bus 0000:00: root bus resource [io 0x0000-0x0cf7 window] [ 0.374150] pci_bus 0000:00: root bus resource [io 0x0d00-0xffff window] [ 0.374296] pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff window] [ 0.374366] pci_bus 0000:00: root bus resource [mem 0x000d0000-0x000dffff window] [ 0.374546] pci_bus 0000:00: root bus resource [mem 0xf0000000-0xfebfffff window] [ 0.374728] pci_bus 0000:00: root bus resource [bus 00-ff] [ 0.374927] pci 0000:00:00.0: [1002:5a13] type 00 class 0x060000 conventional PCI endpoint [ 0.375610] pci 0000:00:00.2: [1002:5a23] type 00 class 0x080600 conventional PCI endpoint [ 0.376255] pci 0000:00:09.0: [1002:5a1c] type 01 class 0x060400 PCIe Root Port [ 0.376500] pci 0000:00:09.0: PCI bridge to [bus 01] [ 0.376647] pci 0000:00:09.0: bridge window [io 0xd000-0xdfff] [ 0.376797] pci 0000:00:09.0: bridge window [mem 0xfe900000-0xfe9fffff] [ 0.377037] pci 0000:00:09.0: enabling Extended Tags [ 0.377413] pci 0000:00:09.0: PME# supported from D0 D3hot D3cold [ 0.377945] pci 0000:00:0a.0: [1002:5a1d] type 01 class 0x060400 PCIe Root Port [ 0.378290] pci 0000:00:0a.0: PCI bridge to [bus 02] [ 0.378381] pci 0000:00:0a.0: bridge window [io 0xe000-0xefff] [ 0.378557] pci 0000:00:0a.0: bridge window [mem 0xfea00000-0xfeafffff] [ 0.378761] pci 0000:00:0a.0: enabling Extended Tags [ 0.379120] pci 0000:00:0a.0: PME# supported from D0 D3hot D3cold [ 0.379677] pci 0000:00:11.0: [1002:4390] type 00 class 0x01018f conventional PCI endpoint [ 0.379927] pci 0000:00:11.0: BAR 0 [io 0xc000-0xc007] [ 0.380097] pci 0000:00:11.0: BAR 1 [io 0xb000-0xb003] [ 0.380270] pci 0000:00:11.0: BAR 2 [io 0xa000-0xa007] [ 0.380404] pci 0000:00:11.0: BAR 3 [io 0x9000-0x9003] [ 0.380573] pci 0000:00:11.0: BAR 4 [io 0x8000-0x800f] [ 0.380743] pci 0000:00:11.0: BAR 5 [mem 0xfebfbc00-0xfebfbfff] [ 0.381000] pci 0000:00:11.0: set SATA to AHCI mode [ 0.381385] pci 0000:00:12.0: [1002:4397] type 00 class 0x0c0310 conventional PCI endpoint [ 0.381671] pci 0000:00:12.0: BAR 0 [mem 0xfebf9000-0xfebf9fff] [ 0.382350] pci 0000:00:12.1: [1002:4398] type 00 class 0x0c0310 conventional PCI endpoint [ 0.382592] pci 0000:00:12.1: BAR 0 [mem 0xfebfa000-0xfebfafff] [ 0.383286] pci 0000:00:12.2: [1002:4396] type 00 class 0x0c0320 conventional PCI endpoint [ 0.383443] pci 0000:00:12.2: BAR 0 [mem 0xfebfb800-0xfebfb8ff] [ 0.384006] pci 0000:00:12.2: supports D1 D2 [ 0.384134] pci 0000:00:12.2: PME# supported from D0 D1 D2 D3hot [ 0.384471] pci 0000:00:13.0: [1002:4397] type 00 class 0x0c0310 conventional PCI endpoint [ 0.384743] pci 0000:00:13.0: BAR 0 [mem 0xfebf7000-0xfebf7fff] [ 0.385429] pci 0000:00:13.1: [1002:4398] type 00 class 0x0c0310 conventional PCI endpoint [ 0.385722] pci 0000:00:13.1: BAR 0 [mem 0xfebf8000-0xfebf8fff] [ 0.386402] pci 0000:00:13.2: [1002:4396] type 00 class 0x0c0320 conventional PCI endpoint [ 0.386660] pci 0000:00:13.2: BAR 0 [mem 0xfebfb400-0xfebfb4ff] [ 0.387207] pci 0000:00:13.2: supports D1 D2 [ 0.387337] pci 0000:00:13.2: PME# supported from D0 D1 D2 D3hot [ 0.387704] pci 0000:00:14.0: [1002:4385] type 00 class 0x0c0500 conventional PCI endpoint [ 0.388487] pci 0000:00:14.1: [1002:439c] type 00 class 0x01018a conventional PCI endpoint [ 0.388723] pci 0000:00:14.1: BAR 0 [io 0x0000-0x0007] [ 0.388882] pci 0000:00:14.1: BAR 1 [io 0x0000-0x0003] [ 0.389081] pci 0000:00:14.1: BAR 2 [io 0x0000-0x0007] [ 0.389259] pci 0000:00:14.1: BAR 3 [io 0x0000-0x0003] [ 0.389391] pci 0000:00:14.1: BAR 4 [io 0xff00-0xff0f] [ 0.389591] pci 0000:00:14.1: BAR 0 [io 0x01f0-0x01f7]: legacy IDE quirk [ 0.389735] pci 0000:00:14.1: BAR 1 [io 0x03f6]: legacy IDE quirk [ 0.389877] pci 0000:00:14.1: BAR 2 [io 0x0170-0x0177]: legacy IDE quirk [ 0.390021] pci 0000:00:14.1: BAR 3 [io 0x0376]: legacy IDE quirk [ 0.390409] pci 0000:00:14.3: [1002:439d] type 00 class 0x060100 conventional PCI endpoint [ 0.391138] pci 0000:00:14.4: [1002:4384] type 01 class 0x060401 conventional PCI bridge [ 0.391463] pci 0000:00:14.4: PCI bridge to [bus 03] (subtractive decode) [ 0.391672] pci 0000:00:14.4: bridge window [mem 0xfdf00000-0xfe7fffff] [ 0.391835] pci 0000:00:14.4: bridge window [mem 0xfc000000-0xfcffffff pref] [ 0.392180] pci 0000:00:14.5: [1002:4399] type 00 class 0x0c0310 conventional PCI endpoint [ 0.392454] pci 0000:00:14.5: BAR 0 [mem 0xfebf6000-0xfebf6fff] [ 0.393188] pci 0000:00:18.0: [1022:1600] type 00 class 0x060000 conventional PCI endpoint [ 0.393752] pci 0000:00:18.1: [1022:1601] type 00 class 0x060000 conventional PCI endpoint [ 0.394300] pci 0000:00:18.2: [1022:1602] type 00 class 0x060000 conventional PCI endpoint [ 0.394855] pci 0000:00:18.3: [1022:1603] type 00 class 0x060000 conventional PCI endpoint [ 0.395427] pci 0000:00:18.4: [1022:1604] type 00 class 0x060000 conventional PCI endpoint [ 0.395953] pci 0000:00:18.5: [1022:1605] type 00 class 0x060000 conventional PCI endpoint [ 0.396681] pci 0000:01:00.0: [8086:10d3] type 00 class 0x020000 PCIe Endpoint [ 0.397787] pci 0000:01:00.0: BAR 0 [mem 0xfe9e0000-0xfe9fffff] [ 0.399463] pci 0000:01:00.0: BAR 2 [io 0xd800-0xd81f] [ 0.400019] pci 0000:01:00.0: BAR 3 [mem 0xfe9dc000-0xfe9dffff] [ 0.402217] pci 0000:01:00.0: PME# supported from D0 D3hot D3cold [ 0.403004] pci 0000:00:09.0: PCI bridge to [bus 01] [ 0.403412] pci 0000:02:00.0: [8086:10d3] type 00 class 0x020000 PCIe Endpoint [ 0.404074] pci 0000:02:00.0: BAR 0 [mem 0xfeae0000-0xfeafffff] [ 0.404898] pci 0000:02:00.0: BAR 2 [io 0xe800-0xe81f] [ 0.405366] pci 0000:02:00.0: BAR 3 [mem 0xfeadc000-0xfeadffff] [ 0.406814] pci 0000:02:00.0: PME# supported from D0 D3hot D3cold [ 0.411414] pci 0000:00:0a.0: PCI bridge to [bus 02] [ 0.411616] pci_bus 0000:03: extended config space not accessible [ 0.411821] pci 0000:03:04.0: [102b:0532] type 00 class 0x030000 conventional PCI endpoint [ 0.412375] pci 0000:03:04.0: BAR 0 [mem 0xfc000000-0xfcffffff pref] [ 0.413908] pci 0000:03:04.0: BAR 1 [mem 0xfdffc000-0xfdffffff] [ 0.415185] pci 0000:03:04.0: BAR 2 [mem 0xfe000000-0xfe7fffff] [ 0.416705] pci 0000:03:04.0: Video device with shadowed ROM at [mem 0x000c0000-0x000dffff] [ 0.417196] pci 0000:00:14.4: PCI bridge to [bus 03] (subtractive decode) [ 0.417355] pci 0000:00:14.4: bridge window [io 0x0000-0x0cf7 window] (subtractive decode) [ 0.419367] pci 0000:00:14.4: bridge window [io 0x0d00-0xffff window] (subtractive decode) [ 0.419552] pci 0000:00:14.4: bridge window [mem 0x000a0000-0x000bffff window] (subtractive decode) [ 0.419737] pci 0000:00:14.4: bridge window [mem 0x000d0000-0x000dffff window] (subtractive decode) [ 0.419929] pci 0000:00:14.4: bridge window [mem 0xf0000000-0xfebfffff window] (subtractive decode) [ 0.420196] pci_bus 0000:00: on NUMA node 0 [ 0.421292] ACPI: PCI: Interrupt link LNKA configured for IRQ 10 [ 0.421448] ACPI: PCI: Interrupt link LNKB configured for IRQ 11 [ 0.421645] ACPI: PCI: Interrupt link LNKC configured for IRQ 10 [ 0.421844] ACPI: PCI: Interrupt link LNKD configured for IRQ 10 [ 0.422052] ACPI: PCI: Interrupt link LNKE configured for IRQ 7 [ 0.422252] ACPI: PCI: Interrupt link LNKF configured for IRQ 10 [ 0.422252] ACPI: PCI: Interrupt link LNKG configured for IRQ 11 [ 0.422252] ACPI: PCI: Interrupt link LNKH configured for IRQ 10 [ 0.422252] xen:balloon: Initialising balloon driver [ 0.597554] iommu: Default domain type: Translated [ 0.597701] iommu: DMA domain TLB invalidation policy: lazy mode [ 0.598516] SCSI subsystem initialized [ 0.598656] libata version 3.00 loaded. [ 0.598656] ACPI: bus type USB registered [ 0.598656] usbcore: registered new interface driver usbfs [ 0.598713] usbcore: registered new interface driver hub [ 0.598853] usbcore: registered new device driver usb [ 0.599389] pps_core: LinuxPPS API ver. 1 registered [ 0.599520] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti [ 0.599758] PTP clock support registered [ 0.599921] Advanced Linux Sound Architecture Driver Initialized. [ 0.600711] NetLabel: Initializing [ 0.600834] NetLabel: domain hash size = 128 [ 0.600987] NetLabel: protocols = UNLABELED CIPSOv4 CALIPSO [ 0.601153] NetLabel: unlabeled traffic allowed by default [ 0.601392] PCI: Using ACPI for IRQ routing [ 0.630685] PCI: pci_cache_line_size set to 64 bytes [ 0.630881] e820: reserve RAM buffer [mem 0x0009a000-0x0009ffff] [ 0.630884] e820: reserve RAM buffer [mem 0x40065f00-0x43ffffff] [ 0.630887] e820: reserve RAM buffer [mem 0xdfe90000-0xdfffffff] [ 0.630889] e820: reserve RAM buffer [mem 0x21f000000-0x21fffffff] [ 0.631416] pci 0000:03:04.0: vgaarb: setting as boot VGA device [ 0.631555] pci 0000:03:04.0: vgaarb: bridge control possible [ 0.631697] pci 0000:03:04.0: vgaarb: VGA device added: decodes=io+mem,owns=io+mem,locks=none [ 0.631697] vgaarb: loaded [ 0.631808] clocksource: Switched to clocksource tsc-early [ 0.633839] VFS: Disk quotas dquot_6.6.0 [ 0.634187] VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes) [ 0.634677] pnp: PnP ACPI init [ 0.635104] system 00:00: [mem 0xfec20000-0xfec200ff] could not be reserved [ 0.635450] system 00:01: [mem 0xf6000000-0xf6003fff] has been reserved [ 0.636856] system 00:03: [io 0x0a10-0x0a1f] has been reserved [ 0.637211] system 00:04: [mem 0xfec00000-0xfec00fff] could not be reserved [ 0.637353] system 00:04: [mem 0xfee00000-0xfee00fff] has been reserved [ 0.637951] system 00:05: [io 0x0ca2-0x0ca3] has been reserved [ 0.638091] system 00:05: [io 0x0550-0x0551] has been reserved [ 0.638228] system 00:05: [io 0x04d0-0x04d1] has been reserved [ 0.638426] system 00:05: [io 0x040b] has been reserved [ 0.638564] system 00:05: [io 0x04d6] has been reserved [ 0.638698] system 00:05: [io 0x0c00-0x0c01] has been reserved [ 0.638834] system 00:05: [io 0x0c14] has been reserved [ 0.638961] system 00:05: [io 0x0c50-0x0c51] has been reserved [ 0.639097] system 00:05: [io 0x0c52] has been reserved [ 0.639250] system 00:05: [io 0x0c6c] has been reserved [ 0.639441] system 00:05: [io 0x0c6f] has been reserved [ 0.639593] system 00:05: [io 0x0cd0-0x0cd1] has been reserved [ 0.640000] system 00:05: [io 0x0cd2-0x0cd3] has been reserved [ 0.640542] system 00:05: [io 0x0cd4-0x0cd5] has been reserved [ 0.640686] system 00:05: [io 0x0cd6-0x0cd7] has been reserved [ 0.640823] system 00:05: [io 0x0cd8-0x0cdf] has been reserved [ 0.640958] system 00:05: [io 0x0800-0x089f] has been reserved [ 0.641126] system 00:05: [io 0x0b00-0x0b0f] has been reserved [ 0.641262] system 00:05: [io 0x0b20-0x0b3f] has been reserved [ 0.641429] system 00:05: [io 0x0900-0x090f] has been reserved [ 0.641577] system 00:05: [io 0x0910-0x091f] has been reserved [ 0.641739] system 00:05: [io 0xfe00-0xfefe] has been reserved [ 0.641876] system 00:05: [mem 0xffb80000-0xffbfffff] has been reserved [ 0.642014] system 00:05: [mem 0xfec10000-0xfec1001f] has been reserved [ 0.642152] system 00:05: [mem 0xffe50000-0xffe5e05f] has been reserved [ 0.642717] pnp 00:06: [dma 0 disabled] [ 0.643016] pnp 00:07: [dma 0 disabled] [ 0.643208] system 00:08: [mem 0xe0000000-0xefffffff] has been reserved [ 0.644512] pnp 00:09: disabling [mem 0x000c0000-0x000cffff] because it overlaps 0000:03:04.0 BAR 6 [mem 0x000c0000-0x000dffff] [ 0.644745] unchecked MSR access error: RDMSR from 0xc0010058 at rIP: 0xffffffff81122487 (native_read_msr+0x7/0x40) [ 0.644949] Call Trace: [ 0.645054] [ 0.645157] ? ex_handler_msr+0x119/0x140 [ 0.645339] ? fixup_exception+0xbb/0x2e0 [ 0.645529] ? exc_general_protection+0xf2/0x400 [ 0.645668] ? asm_exc_general_protection+0x26/0x30 [ 0.645798] ? native_read_msr+0x7/0x40 [ 0.645914] amd_get_mmconfig_range+0x34/0x80 [ 0.646039] quirk_amd_mmconfig_area+0x35/0x100 [ 0.646168] pnp_fixup_device+0x27/0x80 [ 0.646284] __pnp_add_device+0xe/0x150 [ 0.646433] pnp_add_device+0x49/0xd0 [ 0.646605] pnpacpi_add_device_handler+0x1d4/0x240 [ 0.646734] acpi_ns_get_device_callback+0x11d/0x1d0 [ 0.646862] ? sysfs_add_file_mode_ns+0x6d/0x130 [ 0.646990] ? _raw_spin_unlock_irqrestore+0x13/0x50 [ 0.647117] ? down_timeout+0x39/0x60 [ 0.647233] acpi_ns_walk_namespace+0x1cf/0x260 [ 0.647422] ? __pfx_acpi_ns_get_device_callback+0x10/0x10 [ 0.647575] acpi_get_devices+0xa3/0xc0 [ 0.647873] ? __pfx_pnpacpi_add_device_handler+0x10/0x10 [ 0.648265] ? __pfx_pnpacpi_init+0x10/0x10 [ 0.648530] pnpacpi_init+0x4f/0x80 [ 0.648660] do_one_initcall+0x56/0x250 [ 0.648779] kernel_init_freeable+0x1d9/0x310 [ 0.648908] ? __pfx_kernel_init+0x10/0x10 [ 0.649039] kernel_init+0x15/0x1b0 [ 0.649154] ret_from_fork+0x2f/0x50 [ 0.649272] ? __pfx_kernel_init+0x10/0x10 [ 0.649445] ret_from_fork_asm+0x1a/0x30 [ 0.649565] [ 0.649777] system 00:09: [mem 0x00000000-0x0009ffff] could not be reserved [ 0.649920] system 00:09: [mem 0x000e0000-0x000fffff] could not be reserved [ 0.650060] system 00:09: [mem 0x00100000-0xdfffffff] could not be reserved [ 0.650228] system 00:09: [mem 0xfec00000-0xffffffff] could not be reserved [ 0.650872] pnp: PnP ACPI: found 10 devices [ 0.680290] PM-Timer failed consistency check (0xffffff) - aborting. [ 0.680532] NET: Registered PF_INET protocol family [ 0.680777] IP idents hash table entries: 16384 (order: 5, 131072 bytes, linear) [ 0.681442] tcp_listen_portaddr_hash hash table entries: 512 (order: 1, 8192 bytes, linear) [ 0.681640] Table-perturb hash table entries: 65536 (order: 6, 262144 bytes, linear) [ 0.681816] TCP established hash table entries: 8192 (order: 4, 65536 bytes, linear) [ 0.682045] TCP bind hash table entries: 8192 (order: 6, 262144 bytes, linear) [ 0.682344] TCP: Hash tables configured (established 8192 bind 8192) [ 0.682622] UDP hash table entries: 512 (order: 2, 16384 bytes, linear) [ 0.682786] UDP-Lite hash table entries: 512 (order: 2, 16384 bytes, linear) [ 0.682978] NET: Registered PF_UNIX/PF_LOCAL protocol family [ 0.683984] RPC: Registered named UNIX socket transport module. [ 0.684178] RPC: Registered udp transport module. [ 0.684306] RPC: Registered tcp transport module. [ 0.684498] RPC: Registered tcp-with-tls transport module. [ 0.684630] RPC: Registered tcp NFSv4.1 backchannel transport module. [ 0.685594] pci 0000:00:09.0: PCI bridge to [bus 01] [ 0.685765] pci 0000:00:09.0: bridge window [io 0xd000-0xdfff] [ 0.685917] pci 0000:00:09.0: bridge window [mem 0xfe900000-0xfe9fffff] [ 0.686076] pci 0000:00:0a.0: PCI bridge to [bus 02] [ 0.686205] pci 0000:00:0a.0: bridge window [io 0xe000-0xefff] [ 0.686351] pci 0000:00:0a.0: bridge window [mem 0xfea00000-0xfeafffff] [ 0.686597] pci 0000:00:14.4: PCI bridge to [bus 03] [ 0.686735] pci 0000:00:14.4: bridge window [mem 0xfdf00000-0xfe7fffff] [ 0.686932] pci 0000:00:14.4: bridge window [mem 0xfc000000-0xfcffffff pref] [ 0.687121] pci_bus 0000:00: resource 4 [io 0x0000-0x0cf7 window] [ 0.687258] pci_bus 0000:00: resource 5 [io 0x0d00-0xffff window] [ 0.687427] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff window] [ 0.687574] pci_bus 0000:00: resource 7 [mem 0x000d0000-0x000dffff window] [ 0.687713] pci_bus 0000:00: resource 8 [mem 0xf0000000-0xfebfffff window] [ 0.687852] pci_bus 0000:01: resource 0 [io 0xd000-0xdfff] [ 0.687980] pci_bus 0000:01: resource 1 [mem 0xfe900000-0xfe9fffff] [ 0.688141] pci_bus 0000:02: resource 0 [io 0xe000-0xefff] [ 0.688305] pci_bus 0000:02: resource 1 [mem 0xfea00000-0xfeafffff] [ 0.688474] pci_bus 0000:03: resource 1 [mem 0xfdf00000-0xfe7fffff] [ 0.688707] pci_bus 0000:03: resource 2 [mem 0xfc000000-0xfcffffff pref] [ 0.689160] pci_bus 0000:03: resource 4 [io 0x0000-0x0cf7 window] [ 0.689630] pci_bus 0000:03: resource 5 [io 0x0d00-0xffff window] [ 0.689772] pci_bus 0000:03: resource 6 [mem 0x000a0000-0x000bffff window] [ 0.689917] pci_bus 0000:03: resource 7 [mem 0x000d0000-0x000dffff window] [ 0.690057] pci_bus 0000:03: resource 8 [mem 0xf0000000-0xfebfffff window] [ 1.353636] pci 0000:00:12.0: quirk_usb_early_handoff+0x0/0x7c0 took 647788 usecs [ 1.378972] pci 0000:00:12.1: quirk_usb_early_handoff+0x0/0x7c0 took 24509 usecs [ 1.403643] pci 0000:00:13.0: quirk_usb_early_handoff+0x0/0x7c0 took 23240 usecs [ 1.428632] pci 0000:00:13.1: quirk_usb_early_handoff+0x0/0x7c0 took 24195 usecs [ 1.452873] pci 0000:00:14.5: quirk_usb_early_handoff+0x0/0x7c0 took 23248 usecs [ 1.453682] PCI: CLS 64 bytes, default 64 [ 1.453874] PCI-DMA: Using software bounce buffering for IO (SWIOTLB) [ 1.454040] software IO TLB: mapped [mem 0x0000000033c80000-0x0000000037c80000] (64MB) [ 1.454249] Unpacking initramfs... [ 1.454292] kvm_intel: VMX not supported by CPU 0 [ 1.454751] kvm_amd: SVM not supported by CPU 0 [ 1.455266] clocksource: tsc: mask: 0xffffffffffffffff max_cycles: 0x285c4e01e32, max_idle_ns: 440795295954 ns [ 1.457485] clocksource: Switched to clocksource tsc [ 1.463569] Initialise system trusted keyrings [ 1.464268] workingset: timestamp_bits=62 max_order=18 bucket_order=0 [ 1.465359] NFS: Registering the id_resolver key type [ 1.465758] Key type id_resolver registered [ 1.466050] Key type id_legacy registered [ 1.466787] 9p: Installing v9fs 9p2000 file system support [ 1.496446] Key type asymmetric registered [ 1.496871] Asymmetric key parser 'x509' registered [ 1.497352] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 251) [ 1.497861] io scheduler mq-deadline registered [ 1.498235] io scheduler kyber registered [ 1.500822] input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input0 [ 1.501455] ACPI: button: Power Button [PWRB] [ 1.501626] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input1 [ 1.501862] ACPI: button: Power Button [PWRF] [ 1.503275] xen:xen_evtchn: Event-channel device installed [ 1.503603] xen_pciback: backend is vpci [ 1.507875] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled [ 1.510071] 00:07: ttyS1 at I/O 0x2f8 (irq = 3, base_baud = 115200) is a 16550A [ 1.514549] hpet_acpi_add: no address or irqs in _CRS [ 1.514857] Non-volatile memory driver v1.3 [ 1.528977] loop: module loaded [ 1.555694] ahci 0000:00:11.0: version 3.0 [ 1.556798] ahci 0000:00:11.0: AHCI vers 0001.0100, 32 command slots, 3 Gbps, SATA mode [ 1.557540] ahci 0000:00:11.0: 4/4 ports implemented (port mask 0xf) [ 1.557998] ahci 0000:00:11.0: flags: 64bit ncq sntf ilck pm led clo pmp pio slum part ccc [ 1.563914] scsi host0: ahci [ 1.565461] scsi host1: ahci [ 1.566713] scsi host2: ahci [ 1.567634] scsi host3: ahci [ 1.567820] ata1: SATA max UDMA/133 abar m1024@0xfebfbc00 port 0xfebfbd00 irq 22 lpm-pol 0 [ 1.567998] ata2: SATA max UDMA/133 abar m1024@0xfebfbc00 port 0xfebfbd80 irq 22 lpm-pol 0 [ 1.568175] ata3: SATA max UDMA/133 abar m1024@0xfebfbc00 port 0xfebfbe00 irq 22 lpm-pol 0 [ 1.568374] ata4: SATA max UDMA/133 abar m1024@0xfebfbc00 port 0xfebfbe80 irq 22 lpm-pol 0 [ 1.569058] tun: Universal TUN/TAP device driver, 1.6 [ 1.569416] e100: Intel(R) PRO/100 Network Driver [ 1.569543] e100: Copyright(c) 1999-2006 Intel Corporation [ 1.569683] sky2: driver version 1.30 [ 1.569848] xen_netfront: Initialising Xen virtual ethernet driver [ 1.570638] ehci-pci 0000:00:12.2: EHCI Host Controller [ 1.570988] ehci-pci 0000:00:12.2: new USB bus registered, assigned bus number 1 [ 1.571177] ehci-pci 0000:00:12.2: applying AMD SB700/SB800/Hudson-2/3 EHCI dummy qh workaround [ 1.571454] ehci-pci 0000:00:12.2: debug port 1 [ 1.571912] ehci-pci 0000:00:12.2: irq 17, io mem 0xfebfb800 [ 1.578370] ehci-pci 0000:00:12.2: USB 2.0 started, EHCI 1.00 [ 1.579952] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 6.10 [ 1.580149] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 1.580363] usb usb1: Product: EHCI Host Controller [ 1.580494] usb usb1: Manufacturer: Linux 6.10.0-rc4+ ehci_hcd [ 1.580635] usb usb1: SerialNumber: 0000:00:12.2 [ 1.581514] hub 1-0:1.0: USB hub found [ 1.581694] hub 1-0:1.0: 6 ports detected [ 1.582475] ohci-pci 0000:00:12.0: OHCI PCI host controller [ 1.583354] ohci-pci 0000:00:12.0: new USB bus registered, assigned bus number 2 [ 1.584447] ohci-pci 0000:00:12.0: irq 16, io mem 0xfebf9000 [ 1.640766] usb usb2: New USB device found, idVendor=1d6b, idProduct=0001, bcdDevice= 6.10 [ 1.641020] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 1.641193] usb usb2: Product: OHCI PCI host controller [ 1.641356] usb usb2: Manufacturer: Linux 6.10.0-rc4+ ohci_hcd [ 1.641501] usb usb2: SerialNumber: 0000:00:12.0 [ 1.642018] hub 2-0:1.0: USB hub found [ 1.642217] hub 2-0:1.0: 3 ports detected [ 1.643752] ehci-pci 0000:00:13.2: EHCI Host Controller [ 1.644436] ehci-pci 0000:00:13.2: new USB bus registered, assigned bus number 3 [ 1.644630] ehci-pci 0000:00:13.2: applying AMD SB700/SB800/Hudson-2/3 EHCI dummy qh workaround [ 1.644842] ehci-pci 0000:00:13.2: debug port 1 [ 1.645161] ehci-pci 0000:00:13.2: irq 19, io mem 0xfebfb400 [ 1.652404] ehci-pci 0000:00:13.2: USB 2.0 started, EHCI 1.00 [ 1.655296] usb usb3: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 6.10 [ 1.655928] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 1.656479] usb usb3: Product: EHCI Host Controller [ 1.656747] usb usb3: Manufacturer: Linux 6.10.0-rc4+ ehci_hcd [ 1.657358] usb usb3: SerialNumber: 0000:00:13.2 [ 1.657843] Freeing initrd memory: 20192K [ 1.658823] hub 3-0:1.0: USB hub found [ 1.659241] hub 3-0:1.0: 6 ports detected [ 1.661871] ohci-pci 0000:00:12.1: OHCI PCI host controller [ 1.662809] ohci-pci 0000:00:12.1: new USB bus registered, assigned bus number 4 [ 1.663044] ohci-pci 0000:00:12.1: irq 16, io mem 0xfebfa000 [ 1.718638] usb usb4: New USB device found, idVendor=1d6b, idProduct=0001, bcdDevice= 6.10 [ 1.718828] usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 1.719001] usb usb4: Product: OHCI PCI host controller [ 1.719141] usb usb4: Manufacturer: Linux 6.10.0-rc4+ ohci_hcd [ 1.719277] usb usb4: SerialNumber: 0000:00:12.1 [ 1.720192] hub 4-0:1.0: USB hub found [ 1.720380] hub 4-0:1.0: 3 ports detected [ 1.720862] ohci-pci 0000:00:13.0: OHCI PCI host controller [ 1.721654] ohci-pci 0000:00:13.0: new USB bus registered, assigned bus number 5 [ 1.722000] ohci-pci 0000:00:13.0: irq 18, io mem 0xfebf7000 [ 1.778614] usb usb5: New USB device found, idVendor=1d6b, idProduct=0001, bcdDevice= 6.10 [ 1.778804] usb usb5: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 1.779002] usb usb5: Product: OHCI PCI host controller [ 1.779129] usb usb5: Manufacturer: Linux 6.10.0-rc4+ ohci_hcd [ 1.779264] usb usb5: SerialNumber: 0000:00:13.0 [ 1.780575] hub 5-0:1.0: USB hub found [ 1.781104] hub 5-0:1.0: 3 ports detected [ 1.782445] ohci-pci 0000:00:13.1: OHCI PCI host controller [ 1.782986] ohci-pci 0000:00:13.1: new USB bus registered, assigned bus number 6 [ 1.783188] ohci-pci 0000:00:13.1: irq 18, io mem 0xfebf8000 [ 1.838613] usb usb6: New USB device found, idVendor=1d6b, idProduct=0001, bcdDevice= 6.10 [ 1.838800] usb usb6: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 1.838972] usb usb6: Product: OHCI PCI host controller [ 1.839099] usb usb6: Manufacturer: Linux 6.10.0-rc4+ ohci_hcd [ 1.839243] usb usb6: SerialNumber: 0000:00:13.1 [ 1.839756] hub 6-0:1.0: USB hub found [ 1.839924] hub 6-0:1.0: 3 ports detected [ 1.840636] ohci-pci 0000:00:14.5: OHCI PCI host controller [ 1.840993] ohci-pci 0000:00:14.5: new USB bus registered, assigned bus number 7 [ 1.841196] ohci-pci 0000:00:14.5: irq 18, io mem 0xfebf6000 [ 1.881163] ata4: SATA link down (SStatus 0 SControl 300) [ 1.881478] ata3: SATA link down (SStatus 0 SControl 300) [ 1.897758] usb usb7: New USB device found, idVendor=1d6b, idProduct=0001, bcdDevice= 6.10 [ 1.897938] usb usb7: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 1.898110] usb usb7: Product: OHCI PCI host controller [ 1.898237] usb usb7: Manufacturer: Linux 6.10.0-rc4+ ohci_hcd [ 1.898404] usb usb7: SerialNumber: 0000:00:14.5 [ 1.898784] hub 7-0:1.0: USB hub found [ 1.898996] hub 7-0:1.0: 2 ports detected [ 1.899482] usbcore: registered new interface driver usblp [ 1.899633] usbcore: registered new interface driver usb-storage [ 1.899802] i8042: PNP: No PS/2 controller found. [ 1.899953] i8042: Probing ports directly. [ 1.903323] serio: i8042 KBD port at 0x60,0x64 irq 1 [ 1.903457] serio: i8042 AUX port at 0x60,0x64 irq 12 [ 1.903921] rtc_cmos 00:02: RTC can wake from S4 [ 1.904719] rtc_cmos 00:02: registered as rtc0 [ 1.904888] rtc_cmos 00:02: alarms up to one month, y3k, 114 bytes nvram [ 1.905073] device-mapper: uevent: version 1.0.3 [ 1.905343] device-mapper: ioctl: 4.48.0-ioctl (2023-03-01) initialised: dm-devel@lists.linux.dev [ 1.905545] amd_pstate: the _CPC object is not present in SBIOS or ACPI disabled [ 1.905731] hid: raw HID events driver (C) Jiri Kosina [ 1.906085] usbcore: registered new interface driver usbhid [ 1.906213] usbhid: USB HID core driver [ 1.906792] Initializing XFRM netlink socket [ 1.906929] NET: Registered PF_INET6 protocol family [ 1.907650] Segment Routing with IPv6 [ 1.907782] In-situ OAM (IOAM) with IPv6 [ 1.907946] sit: IPv6, IPv4 and MPLS over IPv4 tunneling driver [ 1.908338] NET: Registered PF_PACKET protocol family [ 1.908536] 9pnet: Installing 9P2000 support [ 1.908707] Key type dns_resolver registered [ 1.908841] x86/pm: family 0x15 cpu detected, MSR saving is needed during suspending. [ 1.909559] IPI shorthand broadcast: enabled [ 1.913796] sched_clock: Marking stable (1882011076, 31287297)->(2017160145, -103861772) [ 1.915984] Timer migration: 1 hierarchy levels; 8 children per group; 1 crossnode level [ 1.916480] registered taskstats version 1 [ 1.916599] Loading compiled-in X.509 certificates [ 1.918772] PM: Magic number: 12:149:189 [ 1.918927] acpi device:1b: hash matches [ 1.919057] printk: legacy console [netcon0] enabled [ 1.919184] netconsole: network logging started [ 1.919673] cfg80211: Loading compiled-in X.509 certificates for regulatory database [ 1.925801] Loaded X.509 cert 'sforshee: 00b28ddf47aef9cea7' [ 1.926217] Loaded X.509 cert 'wens: 61c038651aabdcf94bd0ac7ff06c7248db18c600' [ 1.926444] ALSA device list: [ 1.926561] No soundcards found. [ 1.927439] cfg80211: loaded regulatory.db is malformed or signature is missing/invalid [ 2.042462] ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300) [ 2.042633] ata2: SATA link up 3.0 Gbps (SStatus 123 SControl 300) [ 2.043372] ata2.00: ATA-9: WDC WD1003FZEX-00MK2A0, 01.01A01, max UDMA/133 [ 2.043975] ata1.00: ATA-8: WDC WD1003FBYZ-010FB0, 01.01V03, max UDMA/133 [ 2.044152] ata2.00: 1953525168 sectors, multi 16: LBA48 NCQ (depth 32), AA [ 2.044642] ata1.00: 1953525168 sectors, multi 16: LBA48 NCQ (depth 32), AA [ 2.045235] ata2.00: configured for UDMA/133 [ 2.047099] ata1.00: configured for UDMA/133 [ 2.047504] scsi 0:0:0:0: Direct-Access ATA WDC WD1003FBYZ-0 1V03 PQ: 0 ANSI: 5 [ 2.048977] sd 0:0:0:0: Attached scsi generic sg0 type 0 [ 2.049007] sd 0:0:0:0: [sda] 1953525168 512-byte logical blocks: (1.00 TB/932 GiB) [ 2.049362] sd 0:0:0:0: [sda] Write Protect is off [ 2.049503] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00 [ 2.049523] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 2.049583] scsi 1:0:0:0: Direct-Access ATA WDC WD1003FZEX-0 1A01 PQ: 0 ANSI: 5 [ 2.049613] sd 0:0:0:0: [sda] Preferred minimum I/O size 512 bytes [ 2.051175] sd 1:0:0:0: Attached scsi generic sg1 type 0 [ 2.051203] sd 1:0:0:0: [sdb] 1953525168 512-byte logical blocks: (1.00 TB/932 GiB) [ 2.051560] sd 1:0:0:0: [sdb] 4096-byte physical blocks [ 2.051702] sd 1:0:0:0: [sdb] Write Protect is off [ 2.051828] sd 1:0:0:0: [sdb] Mode Sense: 00 3a 00 00 [ 2.051842] sd 1:0:0:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 2.052049] sd 1:0:0:0: [sdb] Preferred minimum I/O size 4096 bytes [ 2.069016] sd 0:0:0:0: [sda] Attached SCSI disk [ 2.087309] sdb: sdb1 sdb2 < sdb5 > [ 2.087836] sd 1:0:0:0: [sdb] Attached SCSI disk [ 2.088943] Freeing unused kernel image (initmem) memory: 2680K [ 2.089102] Write protecting the kernel read-only data: 24576k [ 2.090373] Freeing unused kernel image (rodata/data gap) memory: 2028K [ 2.141946] x86/mm: Checked W+X mappings: passed, no W+X pages found. [ 2.142134] Run /init as init process [ 2.142257] with arguments: [ 2.142258] /init [ 2.142260] placeholder [ 2.142262] with environment: [ 2.142263] HOME=/ [ 2.142264] TERM=linux [ 2.193394] usb 6-2: new full-speed USB device number 2 using ohci-pci [ 2.276275] e1000e: Intel(R) PRO/1000 Network Driver [ 2.276463] e1000e: Copyright(c) 1999 - 2015 Intel Corporation. [ 2.276977] e1000e 0000:01:00.0: Interrupt Throttling Rate (ints/sec) set to dynamic conservative mode [ 2.321241] e1000e 0000:01:00.0 0000:01:00.0 (uninitialized): registered PHC clock [ 2.357829] usb 6-2: New USB device found, idVendor=0557, idProduct=2221, bcdDevice= 0.01 [ 2.358077] usb 6-2: New USB device strings: Mfr=1, Product=2, SerialNumber=0 [ 2.358225] usb 6-2: Product: Hermon USB hidmouse Device [ 2.358416] usb 6-2: Manufacturer: Winbond Electronics Corp [ 2.364489] input: Winbond Electronics Corp Hermon USB hidmouse Device as /devices/pci0000:00/0000:00:13.1/usb6/6-2/6-2:1.0/0003:0557:2221.0001/input/input5 [ 2.365264] hid-generic 0003:0557:2221.0001: input,hidraw0: USB HID v1.00 Mouse [Winbond Electronics Corp Hermon USB hidmouse Device] on usb-0000:00:13.1-2/input0 [ 2.365318] e1000e 0000:01:00.0 eth0: (PCI Express:2.5GT/s:Width x1) 00:25:90:ae:e9:2a [ 2.365741] e1000e 0000:01:00.0 eth0: Intel(R) PRO/1000 Network Connection [ 2.365974] e1000e 0000:01:00.0 eth0: MAC: 3, PHY: 8, PBA No: 0100FF-0FF [ 2.366590] e1000e 0000:02:00.0: Interrupt Throttling Rate (ints/sec) set to dynamic conservative mode [ 2.368796] input: Winbond Electronics Corp Hermon USB hidmouse Device as /devices/pci0000:00/0000:00:13.1/usb6/6-2/6-2:1.1/0003:0557:2221.0002/input/input6 [ 2.413722] e1000e 0000:02:00.0 0000:02:00.0 (uninitialized): registered PHC clock [ 2.420916] hid-generic 0003:0557:2221.0002: input,hidraw1: USB HID v1.00 Keyboard [Winbond Electronics Corp Hermon USB hidmouse Device] on usb-0000:00:13.1-2/input1 [ 2.453433] random: crng init done [ 2.458562] e1000e 0000:02:00.0 eth1: (PCI Express:2.5GT/s:Width x1) 00:25:90:ae:e9:2b [ 2.458743] e1000e 0000:02:00.0 eth1: Intel(R) PRO/1000 Network Connection [ 2.458961] e1000e 0000:02:00.0 eth1: MAC: 3, PHY: 8, PBA No: 0100FF-0FF [ 2.460644] e1000e 0000:01:00.0 enx002590aee92a: renamed from eth0 [ 2.461070] e1000e 0000:02:00.0 enx002590aee92b: renamed from eth1 [ 3.126014] EXT4-fs (dm-0): mounting ext3 file system using the ext4 subsystem [ 3.139777] EXT4-fs (dm-0): mounted filesystem cb09f03e-b242-4f90-9c1c-a8b8b2579542 ro with ordered data mode. Quota mode: none. [ 6.512506] EXT4-fs (dm-0): re-mounted cb09f03e-b242-4f90-9c1c-a8b8b2579542 r/w. Quota mode: none. [ 7.259500] EXT4-fs (sdb1): mounting ext3 file system using the ext4 subsystem [ 7.268190] EXT4-fs (sdb1): mounted filesystem dd8acef3-1e65-426d-9928-943180f84dc6 r/w with ordered data mode. Quota mode: none. [ 7.311098] Adding 1949692k swap on /dev/mapper/pinot1--vg-swap_1. Priority:-2 extents:1 across:1949692k [ 8.677860] xenbr0: port 1(enx002590aee92a) entered blocking state [ 8.678065] xenbr0: port 1(enx002590aee92a) entered disabled state [ 8.678208] e1000e 0000:01:00.0 enx002590aee92a: entered allmulticast mode [ 8.678478] e1000e 0000:01:00.0 enx002590aee92a: entered promiscuous mode [ 11.844381] e1000e 0000:01:00.0 enx002590aee92a: NIC Link is Up 1000 Mbps Full Duplex, Flow Control: None [ 11.844966] xenbr0: port 1(enx002590aee92a) entered blocking state [ 11.845105] xenbr0: port 1(enx002590aee92a) entered forwarding state