[ 0.000000] Linux version 6.10.0-rc4+ (osstest@himrod1) (gcc (Debian 12.2.0-14) 12.2.0, GNU ld (GNU Binutils for Debian) 2.40) #1 SMP PREEMPT_DYNAMIC Sun Jun 23 16:53:02 UTC 2024 [ 0.000000] Command line: placeholder root=/dev/mapper/italia0--vg-root ro console=hvc0 [ 0.000000] Released 0 page(s) [ 0.000000] BIOS-provided physical RAM map: [ 0.000000] Xen: [mem 0x0000000000000000-0x000000000009afff] usable [ 0.000000] Xen: [mem 0x000000000009bc00-0x00000000000fffff] reserved [ 0.000000] Xen: [mem 0x0000000000100000-0x0000000020064fff] usable [ 0.000000] Xen: [mem 0x00000000ab9ba000-0x00000000bba3afff] ACPI NVS [ 0.000000] Xen: [mem 0x00000000bc60a000-0x00000000bc73ffff] reserved [ 0.000000] Xen: [mem 0x00000000beaee000-0x00000000beaf8fff] reserved [ 0.000000] Xen: [mem 0x00000000beb05000-0x00000000beb15fff] reserved [ 0.000000] Xen: [mem 0x00000000bed3a000-0x00000000beddffff] reserved [ 0.000000] Xen: [mem 0x00000000bede0000-0x00000000befdffff] ACPI NVS [ 0.000000] Xen: [mem 0x00000000befe0000-0x00000000beffefff] ACPI data [ 0.000000] Xen: [mem 0x00000000bf000000-0x00000000bfffffff] reserved [ 0.000000] Xen: [mem 0x00000000f8000000-0x00000000fbffffff] reserved [ 0.000000] Xen: [mem 0x00000000fec00000-0x00000000fec00fff] reserved [ 0.000000] Xen: [mem 0x00000000fed19000-0x00000000fed19fff] reserved [ 0.000000] Xen: [mem 0x00000000fed1c000-0x00000000fed1ffff] reserved [ 0.000000] Xen: [mem 0x00000000fed90000-0x00000000fed90fff] reserved [ 0.000000] Xen: [mem 0x00000000fee00000-0x00000000feefffff] reserved [ 0.000000] Xen: [mem 0x00000000ffa00000-0x00000000ffffffff] reserved [ 0.000000] NX (Execute Disable) protection: active [ 0.000000] APIC: Static calls initialized [ 0.000000] SMBIOS 2.6 present. [ 0.000000] DMI: Intel Corporation SandyBridge Platform/To be filled by O.E.M., BIOS S1200BT.86B.02.00.0042.050820141549 05/08/2014 [ 0.000000] DMI: Memory slots populated: 1/4 [ 0.000000] Hypervisor detected: Xen PV [ 0.000022] Xen PV: Detected 4 vCPUS [ 0.000487] tsc: Detected 3092.976 MHz processor [ 0.000942] e820: update [mem 0x00000000-0x00000fff] usable ==> reserved [ 0.000945] e820: remove [mem 0x000a0000-0x000fffff] usable [ 0.000952] last_pfn = 0x20065 max_arch_pfn = 0x400000000 [ 0.000954] MTRR map: 3 entries (0 fixed + 3 variable; max 20), built from 10 variable MTRRs [ 0.000956] MTRRs set to read-only [ 0.000959] x86/PAT: Configuration [0-7]: WB WT UC- UC WC WP UC UC [ 0.000995] Kernel/User page tables isolation: disabled on XEN PV. [ 0.024512] RAMDISK: [mem 0x04000000-0x053a4fff] [ 0.024520] ACPI: Early table checksum verification disabled [ 0.034069] ACPI: RSDP 0x00000000000F0410 000024 (v02 INTEL ) [ 0.034080] ACPI: XSDT 0x00000000BEFFDE18 0000BC (v01 INTEL S1200BTS 06222004 INTL 20090903) [ 0.034112] ACPI: FACP 0x00000000BEFFCA98 0000F4 (v04 INTEL S1200BTS 06222004 INTL 20090903) [ 0.034152] ACPI: DSDT 0x00000000BEFEE018 00CE48 (v02 INTEL S1200BTS 00000000 INTL 20100331) [ 0.034168] ACPI: FACS 0x00000000BEFFDD40 000040 [ 0.034183] ACPI: APIC 0x00000000BEFFB018 000652 (v03 INTEL S1200BTS 06222004 INTL 20090903) [ 0.034198] ACPI: SPMI 0x00000000BEFFEC18 000040 (v05 INTEL S1200BTS 06222004 INTL 20090903) [ 0.034213] ACPI: MCFG 0x00000000BEFFEB98 00003C (v01 INTEL S1200BTS 06222004 INTL 20090903) [ 0.034228] ACPI: WDDT 0x00000000BEFFEF18 000040 (v01 INTEL S1200BTS 06222004 INTL 20090903) [ 0.034244] ACPI: HPET 0x00000000BEFFEE98 000038 (v01 INTEL S1200BTS 06222004 INTL 20090903) [ 0.034259] ACPI: SSDT 0x00000000BEFEB018 0010A8 (v02 INTEL S1200BTS 00001000 INTL 20100331) [ 0.034274] ACPI: BOOT 0x00000000BEFFEE18 000028 (v01 INTEL S1200BTS 06222004 INTL 20090903) [ 0.034289] ACPI: SSDT 0x00000000BEFE7698 0005E0 (v02 INTEL S1200BTS 00003000 INTL 20100331) [ 0.034304] ACPI: SSDT 0x00000000BEFE6018 000A92 (v02 INTEL S1200BTS 00003000 INTL 20100331) [ 0.034320] ACPI: SSDT 0x00000000BEFEA598 00054D (v01 INTEL S1200BTS 00001000 INTL 20100331) [ 0.034335] ACPI: SSDT 0x00000000BEFFDB18 000069 (v01 INTEL S1200BTS 00001000 INTL 20100331) [ 0.034350] ACPI: SSDT 0x00000000BEFE9E18 00017B (v02 INTEL S1200BTS 00002000 INTL 20100331) [ 0.034366] ACPI: RMAD 0x00000000BEFE8F18 000078 (v01 INTEL S1200BTS 00000001 INTL 00000001) [ 0.034381] ACPI: SPCR 0x00000000BEFFED98 000050 (v01 INTEL S1200BTS 06222004 INTL 20090903) [ 0.034396] ACPI: HEST 0x00000000BEFFCF18 0000A8 (v01 INTEL S1200BTS 00000001 INTL 00000001) [ 0.034412] ACPI: BERT 0x00000000BEFFED18 000030 (v01 INTEL S1200BTS 00000001 INTL 00000001) [ 0.034427] ACPI: ERST 0x00000000BEFE8C98 000230 (v01 INTEL S1200BTS 00000001 INTL 00000001) [ 0.034442] ACPI: EINJ 0x00000000BEFFC918 000130 (v01 INTEL S1200BTS 00000001 INTL 00000001) [ 0.034450] ACPI: Reserving FACP table memory at [mem 0xbeffca98-0xbeffcb8b] [ 0.034451] ACPI: Reserving DSDT table memory at [mem 0xbefee018-0xbeffae5f] [ 0.034452] ACPI: Reserving FACS table memory at [mem 0xbeffdd40-0xbeffdd7f] [ 0.034453] ACPI: Reserving APIC table memory at [mem 0xbeffb018-0xbeffb669] [ 0.034454] ACPI: Reserving SPMI table memory at [mem 0xbeffec18-0xbeffec57] [ 0.034455] ACPI: Reserving MCFG table memory at [mem 0xbeffeb98-0xbeffebd3] [ 0.034456] ACPI: Reserving WDDT table memory at [mem 0xbeffef18-0xbeffef57] [ 0.034456] ACPI: Reserving HPET table memory at [mem 0xbeffee98-0xbeffeecf] [ 0.034457] ACPI: Reserving SSDT table memory at [mem 0xbefeb018-0xbefec0bf] [ 0.034458] ACPI: Reserving BOOT table memory at [mem 0xbeffee18-0xbeffee3f] [ 0.034459] ACPI: Reserving SSDT table memory at [mem 0xbefe7698-0xbefe7c77] [ 0.034460] ACPI: Reserving SSDT table memory at [mem 0xbefe6018-0xbefe6aa9] [ 0.034460] ACPI: Reserving SSDT table memory at [mem 0xbefea598-0xbefeaae4] [ 0.034461] ACPI: Reserving SSDT table memory at [mem 0xbeffdb18-0xbeffdb80] [ 0.034462] ACPI: Reserving SSDT table memory at [mem 0xbefe9e18-0xbefe9f92] [ 0.034463] ACPI: Reserving RMAD table memory at [mem 0xbefe8f18-0xbefe8f8f] [ 0.034464] ACPI: Reserving SPCR table memory at [mem 0xbeffed98-0xbeffede7] [ 0.034464] ACPI: Reserving HEST table memory at [mem 0xbeffcf18-0xbeffcfbf] [ 0.034465] ACPI: Reserving BERT table memory at [mem 0xbeffed18-0xbeffed47] [ 0.034466] ACPI: Reserving ERST table memory at [mem 0xbefe8c98-0xbefe8ec7] [ 0.034467] ACPI: Reserving EINJ table memory at [mem 0xbeffc918-0xbeffca47] [ 0.034558] APIC: Switched APIC routing to: Xen PV [ 0.039207] Zone ranges: [ 0.039208] DMA [mem 0x0000000000001000-0x0000000000ffffff] [ 0.039210] DMA32 [mem 0x0000000001000000-0x0000000020064fff] [ 0.039211] Normal empty [ 0.039212] Movable zone start for each node [ 0.039213] Early memory node ranges [ 0.039213] node 0: [mem 0x0000000000001000-0x000000000009afff] [ 0.039215] node 0: [mem 0x0000000000100000-0x0000000020064fff] [ 0.039216] Initmem setup node 0 [mem 0x0000000000001000-0x0000000020064fff] [ 0.039221] On node 0, zone DMA: 1 pages in unavailable ranges [ 0.039261] On node 0, zone DMA: 101 pages in unavailable ranges [ 0.040902] On node 0, zone DMA32: 32667 pages in unavailable ranges [ 0.040908] p2m virtual area at (____ptrval____), size is 40000000 [ 0.176821] Remapped 101 page(s) [ 0.177503] ACPI: PM-Timer IO Port: 0x408 [ 0.177662] ACPI: LAPIC_NMI (acpi_id[0xff] dfl dfl lint[0x1]) [ 0.177706] IOAPIC[0]: apic_id 2, version 32, address 0xfec00000, GSI 0-23 [ 0.177733] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl) [ 0.177736] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level) [ 0.177788] ACPI: Using ACPI (MADT) for SMP configuration information [ 0.177793] ACPI: HPET id: 0x8086a701 base: 0xfed00000 [ 0.177802] ACPI: SPCR: SPCR table version 1 [ 0.177805] ACPI: SPCR: console: uart,io,0x3f8,115200 [ 0.177813] CPU topo: Max. logical packages: 1 [ 0.177814] CPU topo: Max. logical dies: 1 [ 0.177815] CPU topo: Max. dies per package: 1 [ 0.177820] CPU topo: Max. threads per core: 1 [ 0.177820] CPU topo: Num. cores per package: 4 [ 0.177821] CPU topo: Num. threads per package: 4 [ 0.177822] CPU topo: Allowing 4 present CPUs plus 0 hotplug CPUs [ 0.177837] PM: hibernation: Registered nosave memory: [mem 0x00000000-0x00000fff] [ 0.177839] PM: hibernation: Registered nosave memory: [mem 0x0009b000-0x0009bfff] [ 0.177840] PM: hibernation: Registered nosave memory: [mem 0x0009c000-0x000fffff] [ 0.177842] [mem 0x20065000-0xab9b9fff] available for PCI devices [ 0.177846] Booting kernel on Xen [ 0.177847] Xen version: 4.19-unstable (preserve-AD) [ 0.177849] clocksource: refined-jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 1910969940391419 ns [ 0.183265] setup_percpu: NR_CPUS:64 nr_cpumask_bits:4 nr_cpu_ids:4 nr_node_ids:1 [ 0.183703] percpu: Embedded 57 pages/cpu s194408 r8192 d30872 u524288 [ 0.183708] pcpu-alloc: s194408 r8192 d30872 u524288 alloc=1*2097152 [ 0.183710] pcpu-alloc: [0] 0 1 2 3 [ 0.183759] xen: PV spinlocks enabled [ 0.183762] PV qspinlock hash table entries: 256 (order: 0, 4096 bytes, linear) [ 0.183764] Kernel command line: placeholder root=/dev/mapper/italia0--vg-root ro console=hvc0 [ 0.183799] Unknown kernel command line parameters "placeholder", will be passed to user space. [ 0.183888] Dentry cache hash table entries: 65536 (order: 7, 524288 bytes, linear) [ 0.183933] Inode-cache hash table entries: 32768 (order: 6, 262144 bytes, linear) [ 0.184596] Built 1 zonelists, mobility grouping on. Total pages: 131071 [ 0.184599] mem auto-init: stack:all(zero), heap alloc:off, heap free:off [ 0.184602] software IO TLB: area num 4. [ 0.246381] Memory: 386516K/524284K available (16384K kernel code, 2753K rwdata, 6164K rodata, 2680K init, 1864K bss, 137516K reserved, 0K cma-reserved) [ 0.246558] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1 [ 0.248690] Dynamic Preempt: voluntary [ 0.248859] rcu: Preemptible hierarchical RCU implementation. [ 0.248860] rcu: RCU event tracing is enabled. [ 0.248860] rcu: RCU restricting CPUs from NR_CPUS=64 to nr_cpu_ids=4. [ 0.248862] Trampoline variant of Tasks RCU enabled. [ 0.248863] rcu: RCU calculated value of scheduler-enlistment delay is 100 jiffies. [ 0.248864] rcu: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=4 [ 0.248887] RCU Tasks: Setting shift to 2 and lim to 1 rcu_task_cb_adjust=1. [ 0.261122] NR_IRQS: 4352, nr_irqs: 456, preallocated irqs: 16 [ 0.261277] xen:events: Using FIFO-based ABI [ 0.261301] xen: --> pirq=1 -> irq=1 (gsi=1) [ 0.261310] xen: --> pirq=2 -> irq=2 (gsi=2) [ 0.261319] xen: --> pirq=3 -> irq=3 (gsi=3) [ 0.261327] xen: --> pirq=4 -> irq=4 (gsi=4) [ 0.261335] xen: --> pirq=5 -> irq=5 (gsi=5) [ 0.261343] xen: --> pirq=6 -> irq=6 (gsi=6) [ 0.261351] xen: --> pirq=7 -> irq=7 (gsi=7) [ 0.261360] xen: --> pirq=8 -> irq=8 (gsi=8) [ 0.261369] xen: --> pirq=9 -> irq=9 (gsi=9) [ 0.261377] xen: --> pirq=10 -> irq=10 (gsi=10) [ 0.261386] xen: --> pirq=11 -> irq=11 (gsi=11) [ 0.261394] xen: --> pirq=12 -> irq=12 (gsi=12) [ 0.261402] xen: --> pirq=13 -> irq=13 (gsi=13) [ 0.261411] xen: --> pirq=14 -> irq=14 (gsi=14) [ 0.261419] xen: --> pirq=15 -> irq=15 (gsi=15) [ 0.261429] rcu: srcu_init: Setting srcu_struct sizes based on contention. [ 0.266606] Console: colour VGA+ 80x25 [ 0.266609] printk: legacy console [tty0] enabled [ 0.282869] printk: legacy console [hvc0] enabled [ 0.284216] ACPI: Core revision 20240322 [ 0.288790] clocksource: xen: mask: 0xffffffffffffffff max_cycles: 0x1cd42e4dffb, max_idle_ns: 881590591483 ns [ 0.288946] Xen: using vcpuop timer interface [ 0.288951] installing Xen timer for CPU 0 [ 0.289103] clocksource: tsc-early: mask: 0xffffffffffffffff max_cycles: 0x2c955c383c9, max_idle_ns: 440795294255 ns [ 0.289260] Calibrating delay loop (skipped), value calculated using timer frequency.. 6185.95 BogoMIPS (lpj=3092976) [ 0.289564] Last level iTLB entries: 4KB 512, 2MB 8, 4MB 8 [ 0.289681] Last level dTLB entries: 4KB 512, 2MB 32, 4MB 32, 1GB 0 [ 0.289809] Spectre V1 : Mitigation: usercopy/swapgs barriers and __user pointer sanitization [ 0.290013] Spectre V2 : Mitigation: Retpolines [ 0.290267] Spectre V2 : Spectre v2 / SpectreRSB mitigation: Filling RSB on context switch [ 0.290412] Spectre V2 : Spectre v2 / SpectreRSB : Filling RSB on VMEXIT [ 0.290531] Spectre V2 : Enabling Restricted Speculation for firmware calls [ 0.290653] Spectre V2 : mitigation: Enabling conditional Indirect Branch Prediction Barrier [ 0.290800] Speculative Store Bypass: Mitigation: Speculative Store Bypass disabled via prctl [ 0.291266] MDS: Mitigation: Clear CPU buffers [ 0.291435] MMIO Stale Data: Unknown: No mitigations [ 0.291568] x86/fpu: Supporting XSAVE feature 0x001: 'x87 floating point registers' [ 0.291713] x86/fpu: Supporting XSAVE feature 0x002: 'SSE registers' [ 0.291831] x86/fpu: Supporting XSAVE feature 0x004: 'AVX registers' [ 0.291949] x86/fpu: xstate_offset[2]: 576, xstate_sizes[2]: 256 [ 0.292068] x86/fpu: Enabled xstate features 0x7, context size is 832 bytes, using 'standard' format. [ 0.310913] Freeing SMP alternatives memory: 40K [ 0.311041] pid_max: default: 32768 minimum: 301 [ 0.311170] LSM: initializing lsm=capability,selinux [ 0.311265] SELinux: Initializing. [ 0.311398] Mount-cache hash table entries: 1024 (order: 1, 8192 bytes, linear) [ 0.311545] Mountpoint-cache hash table entries: 1024 (order: 1, 8192 bytes, linear) [ 0.312060] cpu 0 spinlock event irq 25 [ 0.312177] VPMU disabled by hypervisor. [ 0.312820] Performance Events: unsupported p6 CPU model 58 no PMU driver, software events only. [ 0.312971] signal: max sigframe size: 1776 [ 0.313158] rcu: Hierarchical SRCU implementation. [ 0.313264] rcu: Max phase no-delay instances is 400. [ 0.313841] smp: Bringing up secondary CPUs ... [ 0.314223] installing Xen timer for CPU 1 [ 0.314698] installing Xen timer for CPU 2 [ 0.315173] installing Xen timer for CPU 3 [ 0.028826] [Firmware Bug]: CPU 1: APIC ID mismatch. CPUID: 0x0001 APIC: 0x0002 [ 0.315382] cpu 1 spinlock event irq 45 [ 0.028826] [Firmware Bug]: CPU 2: APIC ID mismatch. CPUID: 0x0002 APIC: 0x0004 [ 0.315569] cpu 2 spinlock event irq 46 [ 0.028826] [Firmware Bug]: CPU 3: APIC ID mismatch. CPUID: 0x0003 APIC: 0x0006 [ 0.316304] cpu 3 spinlock event irq 47 [ 0.317329] smp: Brought up 1 node, 4 CPUs [ 0.317565] devtmpfs: initialized [ 0.317565] x86/mm: Memory block size: 128MB [ 0.318287] ACPI: PM: Registering ACPI NVS region [mem 0xab9ba000-0xbba3afff] (268963840 bytes) [ 0.320465] ACPI: PM: Registering ACPI NVS region [mem 0xbede0000-0xbefdffff] (2097152 bytes) [ 0.320672] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 1911260446275000 ns [ 0.320831] futex hash table entries: 1024 (order: 4, 65536 bytes, linear) [ 0.321078] PM: RTC time: 17:13:38, date: 2024-06-23 [ 0.321394] NET: Registered PF_NETLINK/PF_ROUTE protocol family [ 0.321536] xen:grant_table: Grant tables using version 1 layout [ 0.321673] Grant table initialized [ 0.321908] audit: initializing netlink subsys (disabled) [ 0.322041] audit: type=2000 audit(1719162819.300:1): state=initialized audit_enabled=0 res=1 [ 0.322309] thermal_sys: Registered thermal governor 'step_wise' [ 0.322311] thermal_sys: Registered thermal governor 'user_space' [ 0.322457] Simple Boot Flag at 0x4f set to 0x1 [ 0.322757] ACPI FADT declares the system doesn't support PCIe ASPM, so disable it [ 0.323049] PCI: ECAM [mem 0xf8000000-0xfbffffff] (base 0xf8000000) for domain 0000 [bus 00-3f] [ 0.323268] PCI: ECAM [mem 0xf8000000-0xfbffffff] reserved as E820 entry [ 0.360291] PCI: Using configuration type 1 for base access [ 0.360463] kprobes: kprobe jump-optimization is enabled. All kprobes are optimized if possible. [ 0.360467] ACPI: Added _OSI(Module Device) [ 0.360467] ACPI: Added _OSI(Processor Device) [ 0.361376] ACPI: Added _OSI(3.0 _SCP Extensions) [ 0.361490] ACPI: Added _OSI(Processor Aggregator Device) [ 0.368085] ACPI: 7 ACPI AML tables successfully acquired and loaded [ 0.368811] xen: registering gsi 9 triggering 0 polarity 0 [ 0.369482] ACPI: [Firmware Bug]: BIOS _OSI(Linux) query ignored [ 0.372751] ACPI: Dynamic OEM Table Load: [ 0.372871] ACPI: SSDT 0xFFFF888003937000 00083B (v01 PmRef Cpu0Cst 00003001 INTL 20100331) [ 0.373638] ACPI: Dynamic OEM Table Load: [ 0.373756] ACPI: SSDT 0xFFFF88800399E400 000303 (v01 PmRef ApIst 00003000 INTL 20100331) [ 0.374354] ACPI: Dynamic OEM Table Load: [ 0.374470] ACPI: SSDT 0xFFFF888003980A00 000119 (v01 PmRef ApCst 00003000 INTL 20100331) [ 0.375443] ACPI: _OSC evaluated successfully for all CPUs [ 0.375700] ACPI: Interpreter enabled [ 0.375828] ACPI: PM: (supports S0 S1 S3 S5) [ 0.375942] ACPI: Using IOAPIC for interrupt routing [ 0.376082] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug [ 0.376264] PCI: Using E820 reservations for host bridge windows [ 0.376616] ACPI: Enabled 10 GPEs in block 00 to 3F [ 0.385016] acpi ABCDEFGH:00: ACPI dock station (docks/bays count: 1) [ 0.387699] ACPI: \_TZ_.FN00: New power resource [ 0.387876] ACPI: \_TZ_.FN01: New power resource [ 0.388051] ACPI: \_TZ_.FN02: New power resource [ 0.388223] ACPI: \_TZ_.FN03: New power resource [ 0.388322] ACPI: \_TZ_.FN04: New power resource [ 0.389196] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-3e]) [ 0.389268] acpi PNP0A08:00: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI HPX-Type3] [ 0.389876] acpi PNP0A08:00: _OSC: platform does not support [LTR] [ 0.390558] acpi PNP0A08:00: _OSC: OS now controls [PME PCIeCapability] [ 0.390682] acpi PNP0A08:00: FADT indicates ASPM is unsupported, using BIOS configuration [ 0.391381] PCI host bridge to bus 0000:00 [ 0.391496] pci_bus 0000:00: root bus resource [io 0x0000-0x0cf7 window] [ 0.391617] pci_bus 0000:00: root bus resource [io 0x0d00-0xffff window] [ 0.391737] pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff window] [ 0.391882] pci_bus 0000:00: root bus resource [mem 0x000d0000-0x000e7fff window] [ 0.392024] pci_bus 0000:00: root bus resource [mem 0xc0000000-0xfeafffff window] [ 0.392168] pci_bus 0000:00: root bus resource [mem 0xfed40000-0xfed44fff window] [ 0.392264] pci_bus 0000:00: root bus resource [bus 00-3e] [ 0.392421] pci 0000:00:00.0: [8086:0158] type 00 class 0x060000 conventional PCI endpoint [ 0.393137] pci 0000:00:19.0: [8086:1502] type 00 class 0x020000 conventional PCI endpoint [ 0.393338] pci 0000:00:19.0: BAR 0 [mem 0xc1b00000-0xc1b1ffff] [ 0.393497] pci 0000:00:19.0: BAR 1 [mem 0xc1b70000-0xc1b70fff] [ 0.393654] pci 0000:00:19.0: BAR 2 [io 0x4040-0x405f] [ 0.394144] pci 0000:00:19.0: PME# supported from D0 D3hot D3cold [ 0.394490] pci 0000:00:1a.0: [8086:1c2d] type 00 class 0x0c0320 conventional PCI endpoint [ 0.394711] pci 0000:00:1a.0: BAR 0 [mem 0xc1b60000-0xc1b603ff] [ 0.395287] pci 0000:00:1a.0: PME# supported from D0 D3hot D3cold [ 0.395630] pci 0000:00:1c.0: [8086:1c10] type 01 class 0x060400 PCIe Root Port [ 0.395932] pci 0000:00:1c.0: PCI bridge to [bus 01] [ 0.396064] pci 0000:00:1c.0: bridge window [io 0x3000-0x3fff] [ 0.396194] pci 0000:00:1c.0: bridge window [mem 0xc1000000-0xc19fffff] [ 0.396315] pci 0000:00:1c.0: bridge window [mem 0xc1c00000-0xc25fffff 64bit pref] [ 0.396782] pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold [ 0.396992] pci 0000:00:1c.0: Enabling MPC IRBNCE [ 0.397112] pci 0000:00:1c.0: Intel PCH root port ACS workaround enabled [ 0.397428] pci 0000:00:1c.4: [8086:1c18] type 01 class 0x060400 PCIe Root Port [ 0.397730] pci 0000:00:1c.4: PCI bridge to [bus 02] [ 0.397862] pci 0000:00:1c.4: bridge window [io 0x2000-0x2fff] [ 0.398047] pci 0000:00:1c.4: bridge window [mem 0xc1a00000-0xc1afffff] [ 0.398501] pci 0000:00:1c.4: PME# supported from D0 D3hot D3cold [ 0.398707] pci 0000:00:1c.4: Enabling MPC IRBNCE [ 0.398827] pci 0000:00:1c.4: Intel PCH root port ACS workaround enabled [ 0.399151] pci 0000:00:1d.0: [8086:1c26] type 00 class 0x0c0320 conventional PCI endpoint [ 0.399338] pci 0000:00:1d.0: BAR 0 [mem 0xc1b50000-0xc1b503ff] [ 0.399871] pci 0000:00:1d.0: PME# supported from D0 D3hot D3cold [ 0.400199] pci 0000:00:1e.0: [8086:244e] type 01 class 0x060401 conventional PCI bridge [ 0.400415] pci 0000:00:1e.0: PCI bridge to [bus 03] (subtractive decode) [ 0.400601] pci 0000:00:1e.0: bridge window [mem 0xc0000000-0xc0ffffff] [ 0.401060] pci 0000:00:1f.0: [8086:1c52] type 00 class 0x060100 conventional PCI endpoint [ 0.401837] pci 0000:00:1f.2: [8086:1c02] type 00 class 0x010601 conventional PCI endpoint [ 0.402101] pci 0000:00:1f.2: BAR 0 [io 0x4090-0x4097] [ 0.402256] pci 0000:00:1f.2: BAR 1 [io 0x4080-0x4083] [ 0.402415] pci 0000:00:1f.2: BAR 2 [io 0x4070-0x4077] [ 0.402570] pci 0000:00:1f.2: BAR 3 [io 0x4060-0x4063] [ 0.402725] pci 0000:00:1f.2: BAR 4 [io 0x4020-0x403f] [ 0.402879] pci 0000:00:1f.2: BAR 5 [mem 0xc1b40000-0xc1b407ff] [ 0.403239] pci 0000:00:1f.2: PME# supported from D3hot [ 0.403562] pci 0000:00:1f.3: [8086:1c22] type 00 class 0x0c0500 conventional PCI endpoint [ 0.403805] pci 0000:00:1f.3: BAR 0 [mem 0xc1b30000-0xc1b300ff 64bit] [ 0.404041] pci 0000:00:1f.3: BAR 4 [io 0x4000-0x401f] [ 0.404532] pci 0000:00:1c.0: PCI bridge to [bus 01] [ 0.405011] pci 0000:02:00.0: [8086:10d3] type 00 class 0x020000 PCIe Endpoint [ 0.405252] pci 0000:02:00.0: BAR 0 [mem 0xc1a00000-0xc1a1ffff] [ 0.405478] pci 0000:02:00.0: BAR 2 [io 0x2000-0x201f] [ 0.405646] pci 0000:02:00.0: BAR 3 [mem 0xc1a20000-0xc1a23fff] [ 0.406294] pci 0000:02:00.0: PME# supported from D0 D3hot D3cold [ 0.406834] pci 0000:00:1c.4: PCI bridge to [bus 02] [ 0.407093] pci_bus 0000:03: extended config space not accessible [ 0.407272] pci 0000:03:02.0: [126f:0712] type 00 class 0x030000 conventional PCI endpoint [ 0.407529] pci 0000:03:02.0: BAR 0 [mem 0xc0000000-0xc0ffffff] [ 0.407923] pci 0000:03:02.0: Video device with shadowed ROM at [mem 0x000c0000-0x000dffff] [ 0.408372] pci 0000:03:02.0: supports D1 D2 [ 0.408777] pci 0000:00:1e.0: PCI bridge to [bus 03] (subtractive decode) [ 0.408943] pci 0000:00:1e.0: bridge window [io 0x0000-0x0cf7 window] (subtractive decode) [ 0.409091] pci 0000:00:1e.0: bridge window [io 0x0d00-0xffff window] (subtractive decode) [ 0.409240] pci 0000:00:1e.0: bridge window [mem 0x000a0000-0x000bffff window] (subtractive decode) [ 0.409264] pci 0000:00:1e.0: bridge window [mem 0x000d0000-0x000e7fff window] (subtractive decode) [ 0.409413] pci 0000:00:1e.0: bridge window [mem 0xc0000000-0xfeafffff window] (subtractive decode) [ 0.409562] pci 0000:00:1e.0: bridge window [mem 0xfed40000-0xfed44fff window] (subtractive decode) [ 0.409819] pci_bus 0000:00: on NUMA node 0 [ 0.410026] xen: registering gsi 13 triggering 1 polarity 0 [ 0.410532] ACPI: PCI: Interrupt link LNKA configured for IRQ 11 [ 0.410728] ACPI: PCI: Interrupt link LNKB configured for IRQ 10 [ 0.410915] ACPI: PCI: Interrupt link LNKC configured for IRQ 0 [ 0.411034] ACPI: PCI: Interrupt link LNKC disabled [ 0.411217] ACPI: PCI: Interrupt link LNKD configured for IRQ 10 [ 0.411334] ACPI: PCI: Interrupt link LNKE configured for IRQ 3 [ 0.411522] ACPI: PCI: Interrupt link LNKF configured for IRQ 11 [ 0.411708] ACPI: PCI: Interrupt link LNKG configured for IRQ 5 [ 0.411894] ACPI: PCI: Interrupt link LNKH configured for IRQ 0 [ 0.412013] ACPI: PCI: Interrupt link LNKH disabled [ 0.412454] xen:balloon: Initialising balloon driver [ 0.412623] iommu: Default domain type: Translated [ 0.412623] iommu: DMA domain TLB invalidation policy: lazy mode [ 0.412623] SCSI subsystem initialized [ 0.413279] libata version 3.00 loaded. [ 0.413301] ACPI: bus type USB registered [ 0.413427] usbcore: registered new interface driver usbfs [ 0.413549] usbcore: registered new interface driver hub [ 0.413670] usbcore: registered new device driver usb [ 0.413797] pps_core: LinuxPPS API ver. 1 registered [ 0.413959] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti [ 0.414110] PTP clock support registered [ 0.414301] Advanced Linux Sound Architecture Driver Initialized. [ 0.414601] NetLabel: Initializing [ 0.414713] NetLabel: domain hash size = 128 [ 0.414826] NetLabel: protocols = UNLABELED CIPSOv4 CALIPSO [ 0.414956] NetLabel: unlabeled traffic allowed by default [ 0.415286] PCI: Using ACPI for IRQ routing [ 0.426254] PCI: pci_cache_line_size set to 64 bytes [ 0.426441] e820: reserve RAM buffer [mem 0x0009b000-0x0009ffff] [ 0.426444] e820: reserve RAM buffer [mem 0x20065000-0x23ffffff] [ 0.426467] pci 0000:03:02.0: vgaarb: setting as boot VGA device [ 0.426467] pci 0000:03:02.0: vgaarb: bridge control possible [ 0.426525] pci 0000:03:02.0: vgaarb: VGA device added: decodes=io+mem,owns=io+mem,locks=none [ 0.426671] vgaarb: loaded [ 0.427667] clocksource: Switched to clocksource tsc-early [ 0.427898] VFS: Disk quotas dquot_6.6.0 [ 0.428015] VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes) [ 0.428161] hugetlbfs: disabling because there are no supported hugepage sizes [ 0.428161] pnp: PnP ACPI init [ 0.428161] system 00:00: [io 0x0680-0x069f] has been reserved [ 0.428254] system 00:00: [io 0xffff] has been reserved [ 0.428370] system 00:00: [io 0xffff] has been reserved [ 0.428485] system 00:00: [io 0xffff] has been reserved [ 0.428600] system 00:00: [io 0x0400-0x0453] has been reserved [ 0.428763] system 00:00: [io 0x0458-0x047f] has been reserved [ 0.428881] system 00:00: [io 0x0500-0x057f] has been reserved [ 0.428912] system 00:00: [io 0x164e-0x164f] has been reserved [ 0.428912] system 00:00: [io 0x0900-0x090f] has been reserved [ 0.428912] system 00:00: [io 0x0295-0x0296] has been reserved [ 0.429385] xen: registering gsi 8 triggering 1 polarity 0 [ 0.429446] system 00:02: [io 0x0454-0x0457] has been reserved [ 0.429848] xen: registering gsi 4 triggering 1 polarity 0 [ 0.429852] Already setup the GSI :4 [ 0.430433] system 00:04: [mem 0xfed1c000-0xfed1ffff] has been reserved [ 0.430557] system 00:04: [mem 0xfed10000-0xfed17fff] has been reserved [ 0.430678] system 00:04: [mem 0xfed18000-0xfed18fff] has been reserved [ 0.430798] system 00:04: [mem 0xfed19000-0xfed19fff] has been reserved [ 0.430916] system 00:04: [mem 0xf8000000-0xfbffffff] has been reserved [ 0.431037] system 00:04: [mem 0xfed20000-0xfed3ffff] has been reserved [ 0.431158] system 00:04: [mem 0xfed90000-0xfed93fff] could not be reserved [ 0.431291] system 00:04: [mem 0xfed45000-0xfed8ffff] has been reserved [ 0.431412] system 00:04: [mem 0xff000000-0xffffffff] could not be reserved [ 0.431586] system 00:04: [mem 0xfee00000-0xfeefffff] has been reserved [ 0.431707] system 00:04: [mem 0xc1b90000-0xc1b90fff] has been reserved [ 0.432090] system 00:05: [mem 0x00000000-0x0009cfff] could not be reserved [ 0.432270] pnp: PnP ACPI: found 6 devices [ 0.462277] PM-Timer failed consistency check (0xffffff) - aborting. [ 0.462418] NET: Registered PF_INET protocol family [ 0.462579] IP idents hash table entries: 8192 (order: 4, 65536 bytes, linear) [ 0.462900] tcp_listen_portaddr_hash hash table entries: 256 (order: 0, 4096 bytes, linear) [ 0.463050] Table-perturb hash table entries: 65536 (order: 6, 262144 bytes, linear) [ 0.463196] TCP established hash table entries: 4096 (order: 3, 32768 bytes, linear) [ 0.463427] TCP bind hash table entries: 4096 (order: 5, 131072 bytes, linear) [ 0.463598] TCP: Hash tables configured (established 4096 bind 4096) [ 0.463757] UDP hash table entries: 256 (order: 1, 8192 bytes, linear) [ 0.463880] UDP-Lite hash table entries: 256 (order: 1, 8192 bytes, linear) [ 0.464026] NET: Registered PF_UNIX/PF_LOCAL protocol family [ 0.464368] RPC: Registered named UNIX socket transport module. [ 0.464493] RPC: Registered udp transport module. [ 0.464607] RPC: Registered tcp transport module. [ 0.464720] RPC: Registered tcp-with-tls transport module. [ 0.464839] RPC: Registered tcp NFSv4.1 backchannel transport module. [ 0.465309] pci 0000:00:1c.0: PCI bridge to [bus 01] [ 0.465433] pci 0000:00:1c.0: bridge window [io 0x3000-0x3fff] [ 0.465570] pci 0000:00:1c.0: bridge window [mem 0xc1000000-0xc19fffff] [ 0.465702] pci 0000:00:1c.0: bridge window [mem 0xc1c00000-0xc25fffff 64bit pref] [ 0.465869] pci 0000:00:1c.4: PCI bridge to [bus 02] [ 0.465990] pci 0000:00:1c.4: bridge window [io 0x2000-0x2fff] [ 0.466126] pci 0000:00:1c.4: bridge window [mem 0xc1a00000-0xc1afffff] [ 0.466332] pci 0000:00:1e.0: PCI bridge to [bus 03] [ 0.466464] pci 0000:00:1e.0: bridge window [mem 0xc0000000-0xc0ffffff] [ 0.466618] pci_bus 0000:00: resource 4 [io 0x0000-0x0cf7 window] [ 0.466737] pci_bus 0000:00: resource 5 [io 0x0d00-0xffff window] [ 0.466856] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff window] [ 0.466975] pci_bus 0000:00: resource 7 [mem 0x000d0000-0x000e7fff window] [ 0.467095] pci_bus 0000:00: resource 8 [mem 0xc0000000-0xfeafffff window] [ 0.467216] pci_bus 0000:00: resource 9 [mem 0xfed40000-0xfed44fff window] [ 0.467346] pci_bus 0000:01: resource 0 [io 0x3000-0x3fff] [ 0.467463] pci_bus 0000:01: resource 1 [mem 0xc1000000-0xc19fffff] [ 0.467584] pci_bus 0000:01: resource 2 [mem 0xc1c00000-0xc25fffff 64bit pref] [ 0.467727] pci_bus 0000:02: resource 0 [io 0x2000-0x2fff] [ 0.467843] pci_bus 0000:02: resource 1 [mem 0xc1a00000-0xc1afffff] [ 0.467963] pci_bus 0000:03: resource 1 [mem 0xc0000000-0xc0ffffff] [ 0.468082] pci_bus 0000:03: resource 4 [io 0x0000-0x0cf7 window] [ 0.468200] pci_bus 0000:03: resource 5 [io 0x0d00-0xffff window] [ 0.468324] pci_bus 0000:03: resource 6 [mem 0x000a0000-0x000bffff window] [ 0.468445] pci_bus 0000:03: resource 7 [mem 0x000d0000-0x000e7fff window] [ 0.468566] pci_bus 0000:03: resource 8 [mem 0xc0000000-0xfeafffff window] [ 0.468687] pci_bus 0000:03: resource 9 [mem 0xfed40000-0xfed44fff window] [ 0.468927] xen: registering gsi 22 triggering 0 polarity 1 [ 0.468952] xen: --> pirq=22 -> irq=22 (gsi=22) [ 0.490375] pci 0000:00:1a.0: quirk_usb_early_handoff+0x0/0x7c0 took 21000 usecs [ 0.490599] xen: registering gsi 20 triggering 0 polarity 1 [ 0.490622] xen: --> pirq=20 -> irq=20 (gsi=20) [ 0.511411] pci 0000:00:1d.0: quirk_usb_early_handoff+0x0/0x7c0 took 20368 usecs [ 0.511616] PCI: CLS 64 bytes, default 64 [ 0.511766] PCI-DMA: Using software bounce buffering for IO (SWIOTLB) [ 0.511831] Unpacking initramfs... [ 0.511884] software IO TLB: mapped [mem 0x000000001b180000-0x000000001f180000] (64MB) [ 0.512208] kvm_intel: VMX not supported by CPU 1 [ 0.512336] kvm_amd: CPU 1 isn't AMD or Hygon [ 0.512453] clocksource: tsc: mask: 0xffffffffffffffff max_cycles: 0x2c955c383c9, max_idle_ns: 440795294255 ns [ 0.512662] clocksource: Switched to clocksource tsc [ 0.517844] Initialise system trusted keyrings [ 0.518097] workingset: timestamp_bits=62 max_order=17 bucket_order=0 [ 0.518395] NFS: Registering the id_resolver key type [ 0.518521] Key type id_resolver registered [ 0.518633] Key type id_legacy registered [ 0.518807] 9p: Installing v9fs 9p2000 file system support [ 0.531809] Key type asymmetric registered [ 0.531947] Asymmetric key parser 'x509' registered [ 0.532091] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 251) [ 0.532247] io scheduler mq-deadline registered [ 0.532361] io scheduler kyber registered [ 0.532810] xen: registering gsi 16 triggering 0 polarity 1 [ 0.532861] xen: --> pirq=16 -> irq=16 (gsi=16) [ 0.533088] pcieport 0000:00:1c.0: PME: Signaling with IRQ 50 [ 0.533458] xen: registering gsi 16 triggering 0 polarity 1 [ 0.533463] Already setup the GSI :16 [ 0.533765] pcieport 0000:00:1c.4: PME: Signaling with IRQ 51 [ 0.534206] input: Sleep Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0E:00/input/input0 [ 0.534459] ACPI: button: Sleep Button [SLPB] [ 0.534606] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input1 [ 0.534850] ACPI: button: Power Button [PWRF] [ 0.535341] Monitor-Mwait will be used to enter C-1 state [ 0.535379] Monitor-Mwait will be used to enter C-3 state [ 0.535396] ACPI: \_PR_.CPU0: Found 2 idle states [ 0.535748] ACPI: \_PR_.CPU1: Found 2 idle states [ 0.536220] ACPI: \_PR_.CPU2: Found 2 idle states [ 0.536733] ACPI: \_PR_.CPU3: Found 2 idle states [ 0.537367] thermal LNXTHERM:00: registered as thermal_zone0 [ 0.537489] ACPI: thermal: Thermal Zone [TZ00] (28 C) [ 0.537799] thermal LNXTHERM:01: registered as thermal_zone1 [ 0.537933] ACPI: thermal: Thermal Zone [TZ01] (30 C) [ 0.538401] xen:xen_evtchn: Event-channel device installed [ 0.538610] xen_pciback: backend is vpci [ 0.539383] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled [ 0.540265] hpet_acpi_add: no address or irqs in _CRS [ 0.540451] Non-volatile memory driver v1.3 [ 0.543278] loop: module loaded [ 0.548243] ahci 0000:00:1f.2: version 3.0 [ 0.548346] xen: registering gsi 21 triggering 0 polarity 1 [ 0.548375] xen: --> pirq=21 -> irq=21 (gsi=21) [ 0.558687] ahci 0000:00:1f.2: AHCI vers 0001.0300, 32 command slots, 3 Gbps, SATA mode [ 0.558864] ahci 0000:00:1f.2: 6/6 ports implemented (port mask 0x3f) [ 0.560650] ahci 0000:00:1f.2: flags: 64bit ncq sntf pm led clo pio slum part ems apst [ 0.576601] scsi host0: ahci [ 0.576981] scsi host1: ahci [ 0.577433] scsi host2: ahci [ 0.577750] scsi host3: ahci [ 0.578118] scsi host4: ahci [ 0.578435] scsi host5: ahci [ 0.578637] ata1: SATA max UDMA/133 abar m2048@0xc1b40000 port 0xc1b40100 irq 53 lpm-pol 0 [ 0.578787] ata2: SATA max UDMA/133 abar m2048@0xc1b40000 port 0xc1b40180 irq 53 lpm-pol 0 [ 0.578947] ata3: SATA max UDMA/133 abar m2048@0xc1b40000 port 0xc1b40200 irq 53 lpm-pol 0 [ 0.579095] ata4: SATA max UDMA/133 abar m2048@0xc1b40000 port 0xc1b40280 irq 53 lpm-pol 0 [ 0.579242] ata5: SATA max UDMA/133 abar m2048@0xc1b40000 port 0xc1b40300 irq 53 lpm-pol 0 [ 0.579389] ata6: SATA max UDMA/133 abar m2048@0xc1b40000 port 0xc1b40380 irq 53 lpm-pol 0 [ 0.579758] tun: Universal TUN/TAP device driver, 1.6 [ 0.580049] e100: Intel(R) PRO/100 Network Driver [ 0.580166] e100: Copyright(c) 1999-2006 Intel Corporation [ 0.580290] sky2: driver version 1.30 [ 0.580425] xen_netfront: Initialising Xen virtual ethernet driver [ 0.580696] usbcore: registered new interface driver usblp [ 0.580820] usbcore: registered new interface driver usb-storage [ 0.580853] xen: registering gsi 22 triggering 0 polarity 1 [ 0.580960] Already setup the GSI :22 [ 0.580988] i8042: PNP: No PS/2 controller found. [ 0.581163] ehci-pci 0000:00:1a.0: EHCI Host Controller [ 0.581372] rtc_cmos 00:01: RTC can wake from S4 [ 0.581420] ehci-pci 0000:00:1a.0: new USB bus registered, assigned bus number 1 [ 0.581493] xen: registering gsi 20 triggering 0 polarity 1 [ 0.581538] ehci-pci 0000:00:1a.0: debug port 2 [ 0.581645] Already setup the GSI :20 [ 0.582121] rtc_cmos 00:01: registered as rtc0 [ 0.582304] rtc_cmos 00:01: alarms up to one month, y3k, 242 bytes nvram [ 0.582466] device-mapper: uevent: version 1.0.3 [ 0.582650] device-mapper: ioctl: 4.48.0-ioctl (2023-03-01) initialised: dm-devel@lists.linux.dev [ 0.582897] intel_pstate: CPU model not supported [ 0.583039] hid: raw HID events driver (C) Jiri Kosina [ 0.583270] usbcore: registered new interface driver usbhid [ 0.583400] usbhid: USB HID core driver [ 0.583791] Initializing XFRM netlink socket [ 0.583948] NET: Registered PF_INET6 protocol family [ 0.585745] ehci-pci 0000:00:1a.0: irq 22, io mem 0xc1b60000 [ 0.585761] xen: registering gsi 22 triggering 0 polarity 1 [ 0.585884] Already setup the GSI :22 [ 0.585918] Segment Routing with IPv6 [ 0.586055] i801_smbus 0000:00:1f.3: SMBus using PCI interrupt [ 0.586121] In-situ OAM (IOAM) with IPv6 [ 0.586373] sit: IPv6, IPv4 and MPLS over IPv4 tunneling driver [ 0.586616] NET: Registered PF_PACKET protocol family [ 0.586758] 9pnet: Installing 9P2000 support [ 0.586965] Key type dns_resolver registered [ 0.587874] IPI shorthand broadcast: enabled [ 0.587997] i2c i2c-0: Successfully instantiated SPD at 0x51 [ 0.590324] sched_clock: Marking stable (562005776, 27826657)->(595202272, -5369839) [ 0.590848] Timer migration: 1 hierarchy levels; 8 children per group; 1 crossnode level [ 0.591379] registered taskstats version 1 [ 0.591493] Loading compiled-in X.509 certificates [ 0.592793] PM: Magic number: 12:699:239 [ 0.592856] ehci-pci 0000:00:1a.0: USB 2.0 started, EHCI 1.00 [ 0.592955] acpi-fan PNP0C0B:04: hash matches [ 0.593145] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 6.10 [ 0.593149] acpi PNP0C0B:04: hash matches [ 0.593158] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 0.593192] printk: legacy console [netcon0] enabled [ 0.593308] usb usb1: Product: EHCI Host Controller [ 0.593314] netconsole: network logging started [ 0.593320] usb usb1: Manufacturer: Linux 6.10.0-rc4+ ehci_hcd [ 0.593549] cfg80211: Loading compiled-in X.509 certificates for regulatory database [ 0.593573] usb usb1: SerialNumber: 0000:00:1a.0 [ 0.594468] hub 1-0:1.0: USB hub found [ 0.594611] hub 1-0:1.0: 2 ports detected [ 0.594942] ehci-pci 0000:00:1d.0: EHCI Host Controller [ 0.595146] ehci-pci 0000:00:1d.0: new USB bus registered, assigned bus number 2 [ 0.595359] ehci-pci 0000:00:1d.0: debug port 2 [ 0.599485] ehci-pci 0000:00:1d.0: irq 20, io mem 0xc1b50000 [ 0.604341] Freeing initrd memory: 20116K [ 0.606848] ehci-pci 0000:00:1d.0: USB 2.0 started, EHCI 1.00 [ 0.607131] usb usb2: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 6.10 [ 0.607282] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 0.607427] usb usb2: Product: EHCI Host Controller [ 0.607542] usb usb2: Manufacturer: Linux 6.10.0-rc4+ ehci_hcd [ 0.607662] usb usb2: SerialNumber: 0000:00:1d.0 [ 0.607948] hub 2-0:1.0: USB hub found [ 0.608078] hub 2-0:1.0: 2 ports detected [ 0.616325] Loaded X.509 cert 'sforshee: 00b28ddf47aef9cea7' [ 0.616635] Loaded X.509 cert 'wens: 61c038651aabdcf94bd0ac7ff06c7248db18c600' [ 0.616798] ALSA device list: [ 0.616923] No soundcards found. [ 0.617580] cfg80211: loaded regulatory.db is malformed or signature is missing/invalid [ 0.834941] usb 1-1: new high-speed USB device number 2 using ehci-pci [ 0.850931] usb 2-1: new high-speed USB device number 2 using ehci-pci [ 0.887592] ata6: SATA link down (SStatus 0 SControl 300) [ 0.887731] ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300) [ 0.887887] ata5: SATA link down (SStatus 0 SControl 300) [ 0.888027] ata3: SATA link up 1.5 Gbps (SStatus 113 SControl 300) [ 0.888166] ata4: SATA link down (SStatus 0 SControl 300) [ 0.889159] ata1.00: ATA-8: WDC WD1003FBYZ-010FB0, 01.01V03, max UDMA/133 [ 0.889814] ata1.00: 1953525168 sectors, multi 16: LBA48 NCQ (depth 32), AA [ 0.891547] ata1.00: configured for UDMA/133 [ 0.891755] ata3.00: ATAPI: Slimtype DVD A DS8ABSH, AP52, max UDMA/100 [ 0.891880] scsi 0:0:0:0: Direct-Access ATA WDC WD1003FBYZ-0 1V03 PQ: 0 ANSI: 5 [ 0.892536] sd 0:0:0:0: Attached scsi generic sg0 type 0 [ 0.892610] sd 0:0:0:0: [sda] 1953525168 512-byte logical blocks: (1.00 TB/932 GiB) [ 0.892690] ata3.00: configured for UDMA/100 [ 0.892846] sd 0:0:0:0: [sda] Write Protect is off [ 0.893033] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00 [ 0.893099] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 0.893367] sd 0:0:0:0: [sda] Preferred minimum I/O size 512 bytes [ 0.895276] ata2: SATA link down (SStatus 0 SControl 300) [ 0.905921] scsi 2:0:0:0: CD-ROM Slimtype DVD A DS8ABSH AP52 PQ: 0 ANSI: 5 [ 0.916680] sda: sda1 sda2 < sda5 > [ 0.917112] sd 0:0:0:0: [sda] Attached SCSI disk [ 0.943525] sr 2:0:0:0: [sr0] scsi3-mmc drive: 24x/24x writer dvd-ram cd/rw xa/form2 cdda tray [ 0.943681] cdrom: Uniform CD-ROM driver Revision: 3.20 [ 0.963679] usb 1-1: New USB device found, idVendor=8087, idProduct=0024, bcdDevice= 0.00 [ 0.963849] usb 1-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0 [ 0.964328] hub 1-1:1.0: USB hub found [ 0.964643] hub 1-1:1.0: 6 ports detected [ 0.967394] sr 2:0:0:0: Attached scsi CD-ROM sr0 [ 0.967476] sr 2:0:0:0: Attached scsi generic sg1 type 5 [ 0.969366] Freeing unused kernel image (initmem) memory: 2680K [ 0.969501] Write protecting the kernel read-only data: 24576k [ 0.979183] usb 2-1: New USB device found, idVendor=8087, idProduct=0024, bcdDevice= 0.00 [ 0.979332] usb 2-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0 [ 0.979712] hub 2-1:1.0: USB hub found [ 0.979931] hub 2-1:1.0: 6 ports detected [ 0.991494] Freeing unused kernel image (rodata/data gap) memory: 2028K [ 1.165923] x86/mm: Checked W+X mappings: passed, no W+X pages found. [ 1.166048] Run /init as init process [ 1.166160] with arguments: [ 1.166161] /init [ 1.166162] placeholder [ 1.166163] with environment: [ 1.166163] HOME=/ [ 1.166164] TERM=linux [ 1.506974] e1000e: Intel(R) PRO/1000 Network Driver [ 1.507101] e1000e: Copyright(c) 1999 - 2015 Intel Corporation. [ 1.507325] xen: registering gsi 19 triggering 0 polarity 1 [ 1.507353] xen: --> pirq=19 -> irq=19 (gsi=19) [ 1.507605] e1000e 0000:00:19.0: Interrupt Throttling Rate (ints/sec) set to dynamic conservative mode [ 1.618599] e1000e 0000:00:19.0 0000:00:19.0 (uninitialized): registered PHC clock [ 1.716304] e1000e 0000:00:19.0 eth0: (PCI Express:2.5GT/s:Width x1) 00:1e:67:96:a4:17 [ 1.716458] e1000e 0000:00:19.0 eth0: Intel(R) PRO/1000 Network Connection [ 1.716624] e1000e 0000:00:19.0 eth0: MAC: 10, PHY: 11, PBA No: 0050FF-0FF [ 1.716874] xen: registering gsi 16 triggering 0 polarity 1 [ 1.716882] Already setup the GSI :16 [ 1.717309] e1000e 0000:02:00.0: Interrupt Throttling Rate (ints/sec) set to dynamic conservative mode [ 1.760810] e1000e 0000:02:00.0 0000:02:00.0 (uninitialized): registered PHC clock [ 1.807313] e1000e 0000:02:00.0 eth1: (PCI Express:2.5GT/s:Width x1) 00:1e:67:96:a4:16 [ 1.807466] e1000e 0000:02:00.0 eth1: Intel(R) PRO/1000 Network Connection [ 1.807671] e1000e 0000:02:00.0 eth1: MAC: 3, PHY: 8, PBA No: 1000FF-0FF [ 1.809688] e1000e 0000:00:19.0 enx001e6796a417: renamed from eth0 [ 1.810254] e1000e 0000:02:00.0 enx001e6796a416: renamed from eth1 [ 1.860850] random: crng init done [ 2.855953] EXT4-fs (dm-0): mounting ext3 file system using the ext4 subsystem [ 2.860586] EXT4-fs (dm-0): mounted filesystem 126bf3ad-3dac-4cb9-bd81-1a9e1d417d5f ro with ordered data mode. Quota mode: none. [ 6.216994] EXT4-fs (dm-0): re-mounted 126bf3ad-3dac-4cb9-bd81-1a9e1d417d5f r/w. Quota mode: none. [ 8.015822] EXT4-fs (sda1): mounting ext3 file system using the ext4 subsystem [ 8.035208] EXT4-fs (sda1): mounted filesystem 728b42c6-547f-4e3a-a8e7-67a27ba9bf80 r/w with ordered data mode. Quota mode: none. [ 8.128168] Adding 1949692k swap on /dev/mapper/italia0--vg-swap_1. Priority:-2 extents:1 across:1949692k [ 9.897758] xenbr0: port 1(enx001e6796a416) entered blocking state [ 9.897980] xenbr0: port 1(enx001e6796a416) entered disabled state [ 9.898107] e1000e 0000:02:00.0 enx001e6796a416: entered allmulticast mode [ 9.898264] e1000e 0000:02:00.0 enx001e6796a416: entered promiscuous mode [ 12.529955] e1000e 0000:02:00.0 enx001e6796a416: NIC Link is Up 1000 Mbps Full Duplex, Flow Control: None [ 12.530529] xenbr0: port 1(enx001e6796a416) entered blocking state [ 12.530657] xenbr0: port 1(enx001e6796a416) entered forwarding state