[ 0.000000] Linux version 6.10.0-rc4+ (osstest@himrod1) (gcc (Debian 12.2.0-14) 12.2.0, GNU ld (GNU Binutils for Debian) 2.40) #1 SMP PREEMPT_DYNAMIC Sun Jun 23 16:53:02 UTC 2024 [ 0.000000] Command line: placeholder root=/dev/mapper/italia1--vg-root ro console=hvc0 [ 0.000000] Released 0 page(s) [ 0.000000] BIOS-provided physical RAM map: [ 0.000000] Xen: [mem 0x0000000000000000-0x000000000009afff] usable [ 0.000000] Xen: [mem 0x000000000009bc00-0x00000000000fffff] reserved [ 0.000000] Xen: [mem 0x0000000000100000-0x0000000020064fff] usable [ 0.000000] Xen: [mem 0x00000000ab9ba000-0x00000000bba3afff] ACPI NVS [ 0.000000] Xen: [mem 0x00000000bc60a000-0x00000000bc73ffff] reserved [ 0.000000] Xen: [mem 0x00000000beaee000-0x00000000beaf8fff] reserved [ 0.000000] Xen: [mem 0x00000000beb05000-0x00000000beb15fff] reserved [ 0.000000] Xen: [mem 0x00000000bed3a000-0x00000000beddffff] reserved [ 0.000000] Xen: [mem 0x00000000bede0000-0x00000000befdffff] ACPI NVS [ 0.000000] Xen: [mem 0x00000000befe0000-0x00000000beffefff] ACPI data [ 0.000000] Xen: [mem 0x00000000bf000000-0x00000000bfffffff] reserved [ 0.000000] Xen: [mem 0x00000000f8000000-0x00000000fbffffff] reserved [ 0.000000] Xen: [mem 0x00000000fec00000-0x00000000fec00fff] reserved [ 0.000000] Xen: [mem 0x00000000fed19000-0x00000000fed19fff] reserved [ 0.000000] Xen: [mem 0x00000000fed1c000-0x00000000fed1ffff] reserved [ 0.000000] Xen: [mem 0x00000000fed90000-0x00000000fed90fff] reserved [ 0.000000] Xen: [mem 0x00000000fee00000-0x00000000feefffff] reserved [ 0.000000] Xen: [mem 0x00000000ffa00000-0x00000000ffffffff] reserved [ 0.000000] NX (Execute Disable) protection: active [ 0.000000] APIC: Static calls initialized [ 0.000000] SMBIOS 2.6 present. [ 0.000000] DMI: Intel Corporation SandyBridge Platform/To be filled by O.E.M., BIOS S1200BT.86B.02.00.0042.050820141549 05/08/2014 [ 0.000000] DMI: Memory slots populated: 1/4 [ 0.000000] Hypervisor detected: Xen PV [ 0.000022] Xen PV: Detected 4 vCPUS [ 0.000485] tsc: Detected 3092.970 MHz processor [ 0.000896] e820: update [mem 0x00000000-0x00000fff] usable ==> reserved [ 0.000899] e820: remove [mem 0x000a0000-0x000fffff] usable [ 0.000906] last_pfn = 0x20065 max_arch_pfn = 0x400000000 [ 0.000908] MTRR map: 3 entries (0 fixed + 3 variable; max 20), built from 10 variable MTRRs [ 0.000909] MTRRs set to read-only [ 0.000913] x86/PAT: Configuration [0-7]: WB WT UC- UC WC WP UC UC [ 0.000948] Kernel/User page tables isolation: disabled on XEN PV. [ 0.023802] RAMDISK: [mem 0x04000000-0x053a4fff] [ 0.023810] ACPI: Early table checksum verification disabled [ 0.033468] ACPI: RSDP 0x00000000000F0410 000024 (v02 INTEL ) [ 0.033479] ACPI: XSDT 0x00000000BEFFDE18 0000BC (v01 INTEL S1200BTS 06222004 INTL 20090903) [ 0.033512] ACPI: FACP 0x00000000BEFFCA98 0000F4 (v04 INTEL S1200BTS 06222004 INTL 20090903) [ 0.033551] ACPI: DSDT 0x00000000BEFEE018 00CE48 (v02 INTEL S1200BTS 00000000 INTL 20100331) [ 0.033567] ACPI: FACS 0x00000000BEFFDD40 000040 [ 0.033582] ACPI: APIC 0x00000000BEFFB018 000652 (v03 INTEL S1200BTS 06222004 INTL 20090903) [ 0.033597] ACPI: SPMI 0x00000000BEFFEC18 000040 (v05 INTEL S1200BTS 06222004 INTL 20090903) [ 0.033612] ACPI: MCFG 0x00000000BEFFEB98 00003C (v01 INTEL S1200BTS 06222004 INTL 20090903) [ 0.033627] ACPI: WDDT 0x00000000BEFFEF18 000040 (v01 INTEL S1200BTS 06222004 INTL 20090903) [ 0.033643] ACPI: HPET 0x00000000BEFFEE98 000038 (v01 INTEL S1200BTS 06222004 INTL 20090903) [ 0.033658] ACPI: SSDT 0x00000000BEFEB018 0010A8 (v02 INTEL S1200BTS 00001000 INTL 20100331) [ 0.033673] ACPI: BOOT 0x00000000BEFFEE18 000028 (v01 INTEL S1200BTS 06222004 INTL 20090903) [ 0.033688] ACPI: SSDT 0x00000000BEFE7698 0005E0 (v02 INTEL S1200BTS 00003000 INTL 20100331) [ 0.033703] ACPI: SSDT 0x00000000BEFE6018 000A92 (v02 INTEL S1200BTS 00003000 INTL 20100331) [ 0.033719] ACPI: SSDT 0x00000000BEFEA598 00054D (v01 INTEL S1200BTS 00001000 INTL 20100331) [ 0.033734] ACPI: SSDT 0x00000000BEFFDB18 000069 (v01 INTEL S1200BTS 00001000 INTL 20100331) [ 0.033749] ACPI: SSDT 0x00000000BEFE9E18 00017B (v02 INTEL S1200BTS 00002000 INTL 20100331) [ 0.033765] ACPI: RMAD 0x00000000BEFE8F18 000078 (v01 INTEL S1200BTS 00000001 INTL 00000001) [ 0.033780] ACPI: SPCR 0x00000000BEFFED98 000050 (v01 INTEL S1200BTS 06222004 INTL 20090903) [ 0.033795] ACPI: HEST 0x00000000BEFFCF18 0000A8 (v01 INTEL S1200BTS 00000001 INTL 00000001) [ 0.033810] ACPI: BERT 0x00000000BEFFED18 000030 (v01 INTEL S1200BTS 00000001 INTL 00000001) [ 0.033825] ACPI: ERST 0x00000000BEFE8C98 000230 (v01 INTEL S1200BTS 00000001 INTL 00000001) [ 0.033840] ACPI: EINJ 0x00000000BEFFC918 000130 (v01 INTEL S1200BTS 00000001 INTL 00000001) [ 0.033848] ACPI: Reserving FACP table memory at [mem 0xbeffca98-0xbeffcb8b] [ 0.033850] ACPI: Reserving DSDT table memory at [mem 0xbefee018-0xbeffae5f] [ 0.033851] ACPI: Reserving FACS table memory at [mem 0xbeffdd40-0xbeffdd7f] [ 0.033852] ACPI: Reserving APIC table memory at [mem 0xbeffb018-0xbeffb669] [ 0.033852] ACPI: Reserving SPMI table memory at [mem 0xbeffec18-0xbeffec57] [ 0.033853] ACPI: Reserving MCFG table memory at [mem 0xbeffeb98-0xbeffebd3] [ 0.033854] ACPI: Reserving WDDT table memory at [mem 0xbeffef18-0xbeffef57] [ 0.033855] ACPI: Reserving HPET table memory at [mem 0xbeffee98-0xbeffeecf] [ 0.033856] ACPI: Reserving SSDT table memory at [mem 0xbefeb018-0xbefec0bf] [ 0.033857] ACPI: Reserving BOOT table memory at [mem 0xbeffee18-0xbeffee3f] [ 0.033857] ACPI: Reserving SSDT table memory at [mem 0xbefe7698-0xbefe7c77] [ 0.033858] ACPI: Reserving SSDT table memory at [mem 0xbefe6018-0xbefe6aa9] [ 0.033859] ACPI: Reserving SSDT table memory at [mem 0xbefea598-0xbefeaae4] [ 0.033860] ACPI: Reserving SSDT table memory at [mem 0xbeffdb18-0xbeffdb80] [ 0.033861] ACPI: Reserving SSDT table memory at [mem 0xbefe9e18-0xbefe9f92] [ 0.033862] ACPI: Reserving RMAD table memory at [mem 0xbefe8f18-0xbefe8f8f] [ 0.033862] ACPI: Reserving SPCR table memory at [mem 0xbeffed98-0xbeffede7] [ 0.033863] ACPI: Reserving HEST table memory at [mem 0xbeffcf18-0xbeffcfbf] [ 0.033864] ACPI: Reserving BERT table memory at [mem 0xbeffed18-0xbeffed47] [ 0.033865] ACPI: Reserving ERST table memory at [mem 0xbefe8c98-0xbefe8ec7] [ 0.033866] ACPI: Reserving EINJ table memory at [mem 0xbeffc918-0xbeffca47] [ 0.033957] APIC: Switched APIC routing to: Xen PV [ 0.038488] Zone ranges: [ 0.038490] DMA [mem 0x0000000000001000-0x0000000000ffffff] [ 0.038492] DMA32 [mem 0x0000000001000000-0x0000000020064fff] [ 0.038493] Normal empty [ 0.038494] Movable zone start for each node [ 0.038495] Early memory node ranges [ 0.038495] node 0: [mem 0x0000000000001000-0x000000000009afff] [ 0.038496] node 0: [mem 0x0000000000100000-0x0000000020064fff] [ 0.038498] Initmem setup node 0 [mem 0x0000000000001000-0x0000000020064fff] [ 0.038502] On node 0, zone DMA: 1 pages in unavailable ranges [ 0.038542] On node 0, zone DMA: 101 pages in unavailable ranges [ 0.040165] On node 0, zone DMA32: 32667 pages in unavailable ranges [ 0.040170] p2m virtual area at (____ptrval____), size is 40000000 [ 0.176246] Remapped 101 page(s) [ 0.176930] ACPI: PM-Timer IO Port: 0x408 [ 0.177091] ACPI: LAPIC_NMI (acpi_id[0xff] dfl dfl lint[0x1]) [ 0.177136] IOAPIC[0]: apic_id 2, version 32, address 0xfec00000, GSI 0-23 [ 0.177162] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl) [ 0.177165] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level) [ 0.177217] ACPI: Using ACPI (MADT) for SMP configuration information [ 0.177222] ACPI: HPET id: 0x8086a701 base: 0xfed00000 [ 0.177232] ACPI: SPCR: SPCR table version 1 [ 0.177234] ACPI: SPCR: console: uart,io,0x3f8,115200 [ 0.177243] CPU topo: Max. logical packages: 1 [ 0.177244] CPU topo: Max. logical dies: 1 [ 0.177245] CPU topo: Max. dies per package: 1 [ 0.177249] CPU topo: Max. threads per core: 1 [ 0.177250] CPU topo: Num. cores per package: 4 [ 0.177251] CPU topo: Num. threads per package: 4 [ 0.177251] CPU topo: Allowing 4 present CPUs plus 0 hotplug CPUs [ 0.177266] PM: hibernation: Registered nosave memory: [mem 0x00000000-0x00000fff] [ 0.177268] PM: hibernation: Registered nosave memory: [mem 0x0009b000-0x0009bfff] [ 0.177269] PM: hibernation: Registered nosave memory: [mem 0x0009c000-0x000fffff] [ 0.177271] [mem 0x20065000-0xab9b9fff] available for PCI devices [ 0.177275] Booting kernel on Xen [ 0.177275] Xen version: 4.19-unstable (preserve-AD) [ 0.177278] clocksource: refined-jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 1910969940391419 ns [ 0.182617] setup_percpu: NR_CPUS:64 nr_cpumask_bits:4 nr_cpu_ids:4 nr_node_ids:1 [ 0.183057] percpu: Embedded 57 pages/cpu s194408 r8192 d30872 u524288 [ 0.183063] pcpu-alloc: s194408 r8192 d30872 u524288 alloc=1*2097152 [ 0.183066] pcpu-alloc: [0] 0 1 2 3 [ 0.183113] xen: PV spinlocks enabled [ 0.183116] PV qspinlock hash table entries: 256 (order: 0, 4096 bytes, linear) [ 0.183118] Kernel command line: placeholder root=/dev/mapper/italia1--vg-root ro console=hvc0 [ 0.183153] Unknown kernel command line parameters "placeholder", will be passed to user space. [ 0.183243] Dentry cache hash table entries: 65536 (order: 7, 524288 bytes, linear) [ 0.183287] Inode-cache hash table entries: 32768 (order: 6, 262144 bytes, linear) [ 0.183947] Built 1 zonelists, mobility grouping on. Total pages: 131071 [ 0.183951] mem auto-init: stack:all(zero), heap alloc:off, heap free:off [ 0.183952] software IO TLB: area num 4. [ 0.245688] Memory: 386516K/524284K available (16384K kernel code, 2753K rwdata, 6164K rodata, 2680K init, 1864K bss, 137516K reserved, 0K cma-reserved) [ 0.245864] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1 [ 0.247991] Dynamic Preempt: voluntary [ 0.248160] rcu: Preemptible hierarchical RCU implementation. [ 0.248161] rcu: RCU event tracing is enabled. [ 0.248161] rcu: RCU restricting CPUs from NR_CPUS=64 to nr_cpu_ids=4. [ 0.248163] Trampoline variant of Tasks RCU enabled. [ 0.248164] rcu: RCU calculated value of scheduler-enlistment delay is 100 jiffies. [ 0.248164] rcu: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=4 [ 0.248187] RCU Tasks: Setting shift to 2 and lim to 1 rcu_task_cb_adjust=1. [ 0.260407] NR_IRQS: 4352, nr_irqs: 456, preallocated irqs: 16 [ 0.260561] xen:events: Using FIFO-based ABI [ 0.260585] xen: --> pirq=1 -> irq=1 (gsi=1) [ 0.260595] xen: --> pirq=2 -> irq=2 (gsi=2) [ 0.260603] xen: --> pirq=3 -> irq=3 (gsi=3) [ 0.260611] xen: --> pirq=4 -> irq=4 (gsi=4) [ 0.260622] xen: --> pirq=5 -> irq=5 (gsi=5) [ 0.260630] xen: --> pirq=6 -> irq=6 (gsi=6) [ 0.260638] xen: --> pirq=7 -> irq=7 (gsi=7) [ 0.260646] xen: --> pirq=8 -> irq=8 (gsi=8) [ 0.260655] xen: --> pirq=9 -> irq=9 (gsi=9) [ 0.260664] xen: --> pirq=10 -> irq=10 (gsi=10) [ 0.260672] xen: --> pirq=11 -> irq=11 (gsi=11) [ 0.260681] xen: --> pirq=12 -> irq=12 (gsi=12) [ 0.260689] xen: --> pirq=13 -> irq=13 (gsi=13) [ 0.260697] xen: --> pirq=14 -> irq=14 (gsi=14) [ 0.260706] xen: --> pirq=15 -> irq=15 (gsi=15) [ 0.260716] rcu: srcu_init: Setting srcu_struct sizes based on contention. [ 0.266026] Console: colour VGA+ 80x25 [ 0.266029] printk: legacy console [tty0] enabled [ 0.282252] printk: legacy console [hvc0] enabled [ 0.283586] ACPI: Core revision 20240322 [ 0.288006] clocksource: xen: mask: 0xffffffffffffffff max_cycles: 0x1cd42e4dffb, max_idle_ns: 881590591483 ns [ 0.288163] Xen: using vcpuop timer interface [ 0.288168] installing Xen timer for CPU 0 [ 0.288319] clocksource: tsc-early: mask: 0xffffffffffffffff max_cycles: 0x2c9556e1b50, max_idle_ns: 440795310707 ns [ 0.288477] Calibrating delay loop (skipped), value calculated using timer frequency.. 6185.94 BogoMIPS (lpj=3092970) [ 0.288782] Last level iTLB entries: 4KB 512, 2MB 8, 4MB 8 [ 0.288898] Last level dTLB entries: 4KB 512, 2MB 32, 4MB 32, 1GB 0 [ 0.289026] Spectre V1 : Mitigation: usercopy/swapgs barriers and __user pointer sanitization [ 0.289175] Spectre V2 : Mitigation: Retpolines [ 0.289289] Spectre V2 : Spectre v2 / SpectreRSB mitigation: Filling RSB on context switch [ 0.289618] Spectre V2 : Spectre v2 / SpectreRSB : Filling RSB on VMEXIT [ 0.289737] Spectre V2 : Enabling Restricted Speculation for firmware calls [ 0.289858] Spectre V2 : mitigation: Enabling conditional Indirect Branch Prediction Barrier [ 0.290005] Speculative Store Bypass: Mitigation: Speculative Store Bypass disabled via prctl [ 0.290482] MDS: Mitigation: Clear CPU buffers [ 0.290596] MMIO Stale Data: Unknown: No mitigations [ 0.290729] x86/fpu: Supporting XSAVE feature 0x001: 'x87 floating point registers' [ 0.290873] x86/fpu: Supporting XSAVE feature 0x002: 'SSE registers' [ 0.290994] x86/fpu: Supporting XSAVE feature 0x004: 'AVX registers' [ 0.291113] x86/fpu: xstate_offset[2]: 576, xstate_sizes[2]: 256 [ 0.291231] x86/fpu: Enabled xstate features 0x7, context size is 832 bytes, using 'standard' format. [ 0.309360] Freeing SMP alternatives memory: 40K [ 0.309483] pid_max: default: 32768 minimum: 301 [ 0.309613] LSM: initializing lsm=capability,selinux [ 0.309731] SELinux: Initializing. [ 0.309862] Mount-cache hash table entries: 1024 (order: 1, 8192 bytes, linear) [ 0.310009] Mountpoint-cache hash table entries: 1024 (order: 1, 8192 bytes, linear) [ 0.310469] cpu 0 spinlock event irq 25 [ 0.310591] VPMU disabled by hypervisor. [ 0.311254] Performance Events: unsupported p6 CPU model 58 no PMU driver, software events only. [ 0.311406] signal: max sigframe size: 1776 [ 0.311558] rcu: Hierarchical SRCU implementation. [ 0.311708] rcu: Max phase no-delay instances is 400. [ 0.312281] smp: Bringing up secondary CPUs ... [ 0.312682] installing Xen timer for CPU 1 [ 0.313174] installing Xen timer for CPU 2 [ 0.313658] installing Xen timer for CPU 3 [ 0.028756] [Firmware Bug]: CPU 1: APIC ID mismatch. CPUID: 0x0001 APIC: 0x0002 [ 0.313874] cpu 1 spinlock event irq 45 [ 0.028756] [Firmware Bug]: CPU 2: APIC ID mismatch. CPUID: 0x0002 APIC: 0x0004 [ 0.314514] cpu 2 spinlock event irq 46 [ 0.028756] [Firmware Bug]: CPU 3: APIC ID mismatch. CPUID: 0x0003 APIC: 0x0006 [ 0.314775] cpu 3 spinlock event irq 47 [ 0.315575] smp: Brought up 1 node, 4 CPUs [ 0.315803] devtmpfs: initialized [ 0.315803] x86/mm: Memory block size: 128MB [ 0.316016] ACPI: PM: Registering ACPI NVS region [mem 0xab9ba000-0xbba3afff] (268963840 bytes) [ 0.318463] ACPI: PM: Registering ACPI NVS region [mem 0xbede0000-0xbefdffff] (2097152 bytes) [ 0.318675] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 1911260446275000 ns [ 0.318831] futex hash table entries: 1024 (order: 4, 65536 bytes, linear) [ 0.319076] PM: RTC time: 17:36:43, date: 2024-06-23 [ 0.319334] NET: Registered PF_NETLINK/PF_ROUTE protocol family [ 0.319474] xen:grant_table: Grant tables using version 1 layout [ 0.319616] Grant table initialized [ 0.319851] audit: initializing netlink subsys (disabled) [ 0.319985] audit: type=2000 audit(1719164204.134:1): state=initialized audit_enabled=0 res=1 [ 0.319985] thermal_sys: Registered thermal governor 'step_wise' [ 0.319985] thermal_sys: Registered thermal governor 'user_space' [ 0.320499] Simple Boot Flag at 0x4f set to 0x1 [ 0.320748] ACPI FADT declares the system doesn't support PCIe ASPM, so disable it [ 0.321040] PCI: ECAM [mem 0xf8000000-0xfbffffff] (base 0xf8000000) for domain 0000 [bus 00-3f] [ 0.321192] PCI: ECAM [mem 0xf8000000-0xfbffffff] reserved as E820 entry [ 0.357124] PCI: Using configuration type 1 for base access [ 0.357296] kprobes: kprobe jump-optimization is enabled. All kprobes are optimized if possible. [ 0.357554] ACPI: Added _OSI(Module Device) [ 0.357624] ACPI: Added _OSI(Processor Device) [ 0.357737] ACPI: Added _OSI(3.0 _SCP Extensions) [ 0.357851] ACPI: Added _OSI(Processor Aggregator Device) [ 0.364605] ACPI: 7 ACPI AML tables successfully acquired and loaded [ 0.365324] xen: registering gsi 9 triggering 0 polarity 0 [ 0.365855] ACPI: [Firmware Bug]: BIOS _OSI(Linux) query ignored [ 0.366979] ACPI: Dynamic OEM Table Load: [ 0.367099] ACPI: SSDT 0xFFFF888003937000 00083B (v01 PmRef Cpu0Cst 00003001 INTL 20100331) [ 0.367819] ACPI: Dynamic OEM Table Load: [ 0.367938] ACPI: SSDT 0xFFFF88800399E400 000303 (v01 PmRef ApIst 00003000 INTL 20100331) [ 0.368532] ACPI: Dynamic OEM Table Load: [ 0.368649] ACPI: SSDT 0xFFFF888003980A00 000119 (v01 PmRef ApCst 00003000 INTL 20100331) [ 0.369586] ACPI: _OSC evaluated successfully for all CPUs [ 0.369842] ACPI: Interpreter enabled [ 0.369970] ACPI: PM: (supports S0 S1 S3 S5) [ 0.370084] ACPI: Using IOAPIC for interrupt routing [ 0.370225] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug [ 0.370376] PCI: Using E820 reservations for host bridge windows [ 0.370718] ACPI: Enabled 10 GPEs in block 00 to 3F [ 0.378893] acpi ABCDEFGH:00: ACPI dock station (docks/bays count: 1) [ 0.381507] ACPI: \_TZ_.FN00: New power resource [ 0.381686] ACPI: \_TZ_.FN01: New power resource [ 0.381861] ACPI: \_TZ_.FN02: New power resource [ 0.382033] ACPI: \_TZ_.FN03: New power resource [ 0.382205] ACPI: \_TZ_.FN04: New power resource [ 0.383049] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-3e]) [ 0.383175] acpi PNP0A08:00: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI HPX-Type3] [ 0.383750] acpi PNP0A08:00: _OSC: platform does not support [LTR] [ 0.384423] acpi PNP0A08:00: _OSC: OS now controls [PME PCIeCapability] [ 0.384480] acpi PNP0A08:00: FADT indicates ASPM is unsupported, using BIOS configuration [ 0.385125] PCI host bridge to bus 0000:00 [ 0.385239] pci_bus 0000:00: root bus resource [io 0x0000-0x0cf7 window] [ 0.385359] pci_bus 0000:00: root bus resource [io 0x0d00-0xffff window] [ 0.385481] pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff window] [ 0.385626] pci_bus 0000:00: root bus resource [mem 0x000d0000-0x000e7fff window] [ 0.385773] pci_bus 0000:00: root bus resource [mem 0xc0000000-0xfeafffff window] [ 0.385917] pci_bus 0000:00: root bus resource [mem 0xfed40000-0xfed44fff window] [ 0.386061] pci_bus 0000:00: root bus resource [bus 00-3e] [ 0.386217] pci 0000:00:00.0: [8086:0158] type 00 class 0x060000 conventional PCI endpoint [ 0.386895] pci 0000:00:19.0: [8086:1502] type 00 class 0x020000 conventional PCI endpoint [ 0.387110] pci 0000:00:19.0: BAR 0 [mem 0xc1b00000-0xc1b1ffff] [ 0.387268] pci 0000:00:19.0: BAR 1 [mem 0xc1b70000-0xc1b70fff] [ 0.387425] pci 0000:00:19.0: BAR 2 [io 0x4040-0x405f] [ 0.387819] pci 0000:00:19.0: PME# supported from D0 D3hot D3cold [ 0.388163] pci 0000:00:1a.0: [8086:1c2d] type 00 class 0x0c0320 conventional PCI endpoint [ 0.388381] pci 0000:00:1a.0: BAR 0 [mem 0xc1b60000-0xc1b603ff] [ 0.388895] pci 0000:00:1a.0: PME# supported from D0 D3hot D3cold [ 0.389238] pci 0000:00:1c.0: [8086:1c10] type 01 class 0x060400 PCIe Root Port [ 0.389542] pci 0000:00:1c.0: PCI bridge to [bus 01] [ 0.389675] pci 0000:00:1c.0: bridge window [io 0x3000-0x3fff] [ 0.389807] pci 0000:00:1c.0: bridge window [mem 0xc1000000-0xc19fffff] [ 0.389977] pci 0000:00:1c.0: bridge window [mem 0xc1c00000-0xc25fffff 64bit pref] [ 0.390405] pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold [ 0.390570] pci 0000:00:1c.0: Enabling MPC IRBNCE [ 0.390694] pci 0000:00:1c.0: Intel PCH root port ACS workaround enabled [ 0.391010] pci 0000:00:1c.4: [8086:1c18] type 01 class 0x060400 PCIe Root Port [ 0.391312] pci 0000:00:1c.4: PCI bridge to [bus 02] [ 0.391444] pci 0000:00:1c.4: bridge window [io 0x2000-0x2fff] [ 0.391493] pci 0000:00:1c.4: bridge window [mem 0xc1a00000-0xc1afffff] [ 0.391945] pci 0000:00:1c.4: PME# supported from D0 D3hot D3cold [ 0.392151] pci 0000:00:1c.4: Enabling MPC IRBNCE [ 0.392271] pci 0000:00:1c.4: Intel PCH root port ACS workaround enabled [ 0.392600] pci 0000:00:1d.0: [8086:1c26] type 00 class 0x0c0320 conventional PCI endpoint [ 0.392821] pci 0000:00:1d.0: BAR 0 [mem 0xc1b50000-0xc1b503ff] [ 0.393354] pci 0000:00:1d.0: PME# supported from D0 D3hot D3cold [ 0.393685] pci 0000:00:1e.0: [8086:244e] type 01 class 0x060401 conventional PCI bridge [ 0.394020] pci 0000:00:1e.0: PCI bridge to [bus 03] (subtractive decode) [ 0.394169] pci 0000:00:1e.0: bridge window [mem 0xc0000000-0xc0ffffff] [ 0.394630] pci 0000:00:1f.0: [8086:1c52] type 00 class 0x060100 conventional PCI endpoint [ 0.395405] pci 0000:00:1f.2: [8086:1c02] type 00 class 0x010601 conventional PCI endpoint [ 0.395554] pci 0000:00:1f.2: BAR 0 [io 0x4090-0x4097] [ 0.395711] pci 0000:00:1f.2: BAR 1 [io 0x4080-0x4083] [ 0.395865] pci 0000:00:1f.2: BAR 2 [io 0x4070-0x4077] [ 0.396019] pci 0000:00:1f.2: BAR 3 [io 0x4060-0x4063] [ 0.396174] pci 0000:00:1f.2: BAR 4 [io 0x4020-0x403f] [ 0.396327] pci 0000:00:1f.2: BAR 5 [mem 0xc1b40000-0xc1b407ff] [ 0.396689] pci 0000:00:1f.2: PME# supported from D3hot [ 0.396994] pci 0000:00:1f.3: [8086:1c22] type 00 class 0x0c0500 conventional PCI endpoint [ 0.397235] pci 0000:00:1f.3: BAR 0 [mem 0xc1b30000-0xc1b300ff 64bit] [ 0.397473] pci 0000:00:1f.3: BAR 4 [io 0x4000-0x401f] [ 0.397980] pci 0000:00:1c.0: PCI bridge to [bus 01] [ 0.398405] pci 0000:02:00.0: [8086:10d3] type 00 class 0x020000 PCIe Endpoint [ 0.398579] pci 0000:02:00.0: BAR 0 [mem 0xc1a00000-0xc1a1ffff] [ 0.398803] pci 0000:02:00.0: BAR 2 [io 0x2000-0x201f] [ 0.398969] pci 0000:02:00.0: BAR 3 [mem 0xc1a20000-0xc1a23fff] [ 0.399579] pci 0000:02:00.0: PME# supported from D0 D3hot D3cold [ 0.400119] pci 0000:00:1c.4: PCI bridge to [bus 02] [ 0.400380] pci_bus 0000:03: extended config space not accessible [ 0.400541] pci 0000:03:02.0: [126f:0712] type 00 class 0x030000 conventional PCI endpoint [ 0.400762] pci 0000:03:02.0: BAR 0 [mem 0xc0000000-0xc0ffffff] [ 0.401155] pci 0000:03:02.0: Video device with shadowed ROM at [mem 0x000c0000-0x000dffff] [ 0.401589] pci 0000:03:02.0: supports D1 D2 [ 0.401994] pci 0000:00:1e.0: PCI bridge to [bus 03] (subtractive decode) [ 0.402159] pci 0000:00:1e.0: bridge window [io 0x0000-0x0cf7 window] (subtractive decode) [ 0.402307] pci 0000:00:1e.0: bridge window [io 0x0d00-0xffff window] (subtractive decode) [ 0.402455] pci 0000:00:1e.0: bridge window [mem 0x000a0000-0x000bffff window] (subtractive decode) [ 0.402480] pci 0000:00:1e.0: bridge window [mem 0x000d0000-0x000e7fff window] (subtractive decode) [ 0.402631] pci 0000:00:1e.0: bridge window [mem 0xc0000000-0xfeafffff window] (subtractive decode) [ 0.402778] pci 0000:00:1e.0: bridge window [mem 0xfed40000-0xfed44fff window] (subtractive decode) [ 0.403037] pci_bus 0000:00: on NUMA node 0 [ 0.403204] xen: registering gsi 13 triggering 1 polarity 0 [ 0.403711] ACPI: PCI: Interrupt link LNKA configured for IRQ 11 [ 0.403902] ACPI: PCI: Interrupt link LNKB configured for IRQ 10 [ 0.404088] ACPI: PCI: Interrupt link LNKC configured for IRQ 0 [ 0.404207] ACPI: PCI: Interrupt link LNKC disabled [ 0.404390] ACPI: PCI: Interrupt link LNKD configured for IRQ 10 [ 0.404550] ACPI: PCI: Interrupt link LNKE configured for IRQ 3 [ 0.404738] ACPI: PCI: Interrupt link LNKF configured for IRQ 11 [ 0.404924] ACPI: PCI: Interrupt link LNKG configured for IRQ 5 [ 0.405111] ACPI: PCI: Interrupt link LNKH configured for IRQ 0 [ 0.405229] ACPI: PCI: Interrupt link LNKH disabled [ 0.405666] xen:balloon: Initialising balloon driver [ 0.405802] iommu: Default domain type: Translated [ 0.405802] iommu: DMA domain TLB invalidation policy: lazy mode [ 0.405824] SCSI subsystem initialized [ 0.405950] libata version 3.00 loaded. [ 0.405950] ACPI: bus type USB registered [ 0.406495] usbcore: registered new interface driver usbfs [ 0.406617] usbcore: registered new interface driver hub [ 0.406739] usbcore: registered new device driver usb [ 0.406866] pps_core: LinuxPPS API ver. 1 registered [ 0.406982] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti [ 0.407174] PTP clock support registered [ 0.407496] Advanced Linux Sound Architecture Driver Initialized. [ 0.407798] NetLabel: Initializing [ 0.407911] NetLabel: domain hash size = 128 [ 0.408025] NetLabel: protocols = UNLABELED CIPSOv4 CALIPSO [ 0.408156] NetLabel: unlabeled traffic allowed by default [ 0.408297] PCI: Using ACPI for IRQ routing [ 0.418984] PCI: pci_cache_line_size set to 64 bytes [ 0.419129] e820: reserve RAM buffer [mem 0x0009b000-0x0009ffff] [ 0.419132] e820: reserve RAM buffer [mem 0x20065000-0x23ffffff] [ 0.419155] pci 0000:03:02.0: vgaarb: setting as boot VGA device [ 0.419155] pci 0000:03:02.0: vgaarb: bridge control possible [ 0.419155] pci 0000:03:02.0: vgaarb: VGA device added: decodes=io+mem,owns=io+mem,locks=none [ 0.419481] vgaarb: loaded [ 0.420819] clocksource: Switched to clocksource tsc-early [ 0.420999] VFS: Disk quotas dquot_6.6.0 [ 0.421117] VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes) [ 0.421263] hugetlbfs: disabling because there are no supported hugepage sizes [ 0.421418] pnp: PnP ACPI init [ 0.421418] system 00:00: [io 0x0680-0x069f] has been reserved [ 0.421448] system 00:00: [io 0xffff] has been reserved [ 0.421564] system 00:00: [io 0xffff] has been reserved [ 0.421680] system 00:00: [io 0xffff] has been reserved [ 0.421798] system 00:00: [io 0x0400-0x0453] has been reserved [ 0.421916] system 00:00: [io 0x0458-0x047f] has been reserved [ 0.422035] system 00:00: [io 0x0500-0x057f] has been reserved [ 0.422155] system 00:00: [io 0x164e-0x164f] has been reserved [ 0.422197] system 00:00: [io 0x0900-0x090f] has been reserved [ 0.422197] system 00:00: [io 0x0295-0x0296] has been reserved [ 0.422538] xen: registering gsi 8 triggering 1 polarity 0 [ 0.422599] system 00:02: [io 0x0454-0x0457] has been reserved [ 0.423000] xen: registering gsi 4 triggering 1 polarity 0 [ 0.423004] Already setup the GSI :4 [ 0.423514] system 00:04: [mem 0xfed1c000-0xfed1ffff] has been reserved [ 0.423638] system 00:04: [mem 0xfed10000-0xfed17fff] has been reserved [ 0.423758] system 00:04: [mem 0xfed18000-0xfed18fff] has been reserved [ 0.423879] system 00:04: [mem 0xfed19000-0xfed19fff] has been reserved [ 0.423999] system 00:04: [mem 0xf8000000-0xfbffffff] has been reserved [ 0.424118] system 00:04: [mem 0xfed20000-0xfed3ffff] has been reserved [ 0.424238] system 00:04: [mem 0xfed90000-0xfed93fff] could not be reserved [ 0.424359] system 00:04: [mem 0xfed45000-0xfed8ffff] has been reserved [ 0.424492] system 00:04: [mem 0xff000000-0xffffffff] could not be reserved [ 0.424613] system 00:04: [mem 0xfee00000-0xfeefffff] has been reserved [ 0.424734] system 00:04: [mem 0xc1b90000-0xc1b90fff] has been reserved [ 0.425116] system 00:05: [mem 0x00000000-0x0009cfff] could not be reserved [ 0.425285] pnp: PnP ACPI: found 6 devices [ 0.454136] PM-Timer failed consistency check (0xffffff) - aborting. [ 0.454276] NET: Registered PF_INET protocol family [ 0.454437] IP idents hash table entries: 8192 (order: 4, 65536 bytes, linear) [ 0.454770] tcp_listen_portaddr_hash hash table entries: 256 (order: 0, 4096 bytes, linear) [ 0.454921] Table-perturb hash table entries: 65536 (order: 6, 262144 bytes, linear) [ 0.455113] TCP established hash table entries: 4096 (order: 3, 32768 bytes, linear) [ 0.455263] TCP bind hash table entries: 4096 (order: 5, 131072 bytes, linear) [ 0.455429] TCP: Hash tables configured (established 4096 bind 4096) [ 0.455658] UDP hash table entries: 256 (order: 1, 8192 bytes, linear) [ 0.455781] UDP-Lite hash table entries: 256 (order: 1, 8192 bytes, linear) [ 0.455928] NET: Registered PF_UNIX/PF_LOCAL protocol family [ 0.456224] RPC: Registered named UNIX socket transport module. [ 0.456345] RPC: Registered udp transport module. [ 0.456460] RPC: Registered tcp transport module. [ 0.456587] RPC: Registered tcp-with-tls transport module. [ 0.456703] RPC: Registered tcp NFSv4.1 backchannel transport module. [ 0.457139] pci 0000:00:1c.0: PCI bridge to [bus 01] [ 0.457263] pci 0000:00:1c.0: bridge window [io 0x3000-0x3fff] [ 0.457399] pci 0000:00:1c.0: bridge window [mem 0xc1000000-0xc19fffff] [ 0.457544] pci 0000:00:1c.0: bridge window [mem 0xc1c00000-0xc25fffff 64bit pref] [ 0.457710] pci 0000:00:1c.4: PCI bridge to [bus 02] [ 0.457857] pci 0000:00:1c.4: bridge window [io 0x2000-0x2fff] [ 0.457995] pci 0000:00:1c.4: bridge window [mem 0xc1a00000-0xc1afffff] [ 0.458151] pci 0000:00:1e.0: PCI bridge to [bus 03] [ 0.458283] pci 0000:00:1e.0: bridge window [mem 0xc0000000-0xc0ffffff] [ 0.458437] pci_bus 0000:00: resource 4 [io 0x0000-0x0cf7 window] [ 0.458567] pci_bus 0000:00: resource 5 [io 0x0d00-0xffff window] [ 0.458686] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff window] [ 0.458807] pci_bus 0000:00: resource 7 [mem 0x000d0000-0x000e7fff window] [ 0.458928] pci_bus 0000:00: resource 8 [mem 0xc0000000-0xfeafffff window] [ 0.459048] pci_bus 0000:00: resource 9 [mem 0xfed40000-0xfed44fff window] [ 0.459169] pci_bus 0000:01: resource 0 [io 0x3000-0x3fff] [ 0.459286] pci_bus 0000:01: resource 1 [mem 0xc1000000-0xc19fffff] [ 0.459405] pci_bus 0000:01: resource 2 [mem 0xc1c00000-0xc25fffff 64bit pref] [ 0.459557] pci_bus 0000:02: resource 0 [io 0x2000-0x2fff] [ 0.459673] pci_bus 0000:02: resource 1 [mem 0xc1a00000-0xc1afffff] [ 0.459792] pci_bus 0000:03: resource 1 [mem 0xc0000000-0xc0ffffff] [ 0.459911] pci_bus 0000:03: resource 4 [io 0x0000-0x0cf7 window] [ 0.460029] pci_bus 0000:03: resource 5 [io 0x0d00-0xffff window] [ 0.460147] pci_bus 0000:03: resource 6 [mem 0x000a0000-0x000bffff window] [ 0.460268] pci_bus 0000:03: resource 7 [mem 0x000d0000-0x000e7fff window] [ 0.460388] pci_bus 0000:03: resource 8 [mem 0xc0000000-0xfeafffff window] [ 0.460520] pci_bus 0000:03: resource 9 [mem 0xfed40000-0xfed44fff window] [ 0.460752] xen: registering gsi 22 triggering 0 polarity 1 [ 0.460776] xen: --> pirq=22 -> irq=22 (gsi=22) [ 0.482592] pci 0000:00:1a.0: quirk_usb_early_handoff+0x0/0x7c0 took 21378 usecs [ 0.482816] xen: registering gsi 20 triggering 0 polarity 1 [ 0.482838] xen: --> pirq=20 -> irq=20 (gsi=20) [ 0.504588] pci 0000:00:1d.0: quirk_usb_early_handoff+0x0/0x7c0 took 21307 usecs [ 0.504791] PCI: CLS 64 bytes, default 64 [ 0.504942] PCI-DMA: Using software bounce buffering for IO (SWIOTLB) [ 0.505055] Unpacking initramfs... [ 0.505062] software IO TLB: mapped [mem 0x000000001b180000-0x000000001f180000] (64MB) [ 0.505383] kvm_intel: VMX not supported by CPU 0 [ 0.505514] kvm_amd: CPU 0 isn't AMD or Hygon [ 0.505634] clocksource: tsc: mask: 0xffffffffffffffff max_cycles: 0x2c9556e1b50, max_idle_ns: 440795310707 ns [ 0.505825] clocksource: Switched to clocksource tsc [ 0.511206] Initialise system trusted keyrings [ 0.511430] workingset: timestamp_bits=62 max_order=17 bucket_order=0 [ 0.511732] NFS: Registering the id_resolver key type [ 0.511871] Key type id_resolver registered [ 0.511983] Key type id_legacy registered [ 0.512151] 9p: Installing v9fs 9p2000 file system support [ 0.525213] Key type asymmetric registered [ 0.525341] Asymmetric key parser 'x509' registered [ 0.525484] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 251) [ 0.525640] io scheduler mq-deadline registered [ 0.525753] io scheduler kyber registered [ 0.526305] xen: registering gsi 16 triggering 0 polarity 1 [ 0.526341] xen: --> pirq=16 -> irq=16 (gsi=16) [ 0.526574] pcieport 0000:00:1c.0: PME: Signaling with IRQ 50 [ 0.526965] xen: registering gsi 16 triggering 0 polarity 1 [ 0.526971] Already setup the GSI :16 [ 0.527270] pcieport 0000:00:1c.4: PME: Signaling with IRQ 51 [ 0.527685] input: Sleep Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0E:00/input/input0 [ 0.527895] ACPI: button: Sleep Button [SLPB] [ 0.528042] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input1 [ 0.528242] ACPI: button: Power Button [PWRF] [ 0.528724] Monitor-Mwait will be used to enter C-1 state [ 0.528740] Monitor-Mwait will be used to enter C-3 state [ 0.528748] ACPI: \_PR_.CPU0: Found 2 idle states [ 0.529115] ACPI: \_PR_.CPU1: Found 2 idle states [ 0.529502] ACPI: \_PR_.CPU2: Found 2 idle states [ 0.530007] ACPI: \_PR_.CPU3: Found 2 idle states [ 0.530601] thermal LNXTHERM:00: registered as thermal_zone0 [ 0.530723] ACPI: thermal: Thermal Zone [TZ00] (28 C) [ 0.531054] thermal LNXTHERM:01: registered as thermal_zone1 [ 0.531178] ACPI: thermal: Thermal Zone [TZ01] (30 C) [ 0.531565] xen:xen_evtchn: Event-channel device installed [ 0.531775] xen_pciback: backend is vpci [ 0.532572] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled [ 0.533469] hpet_acpi_add: no address or irqs in _CRS [ 0.533657] Non-volatile memory driver v1.3 [ 0.535418] loop: module loaded [ 0.540403] ahci 0000:00:1f.2: version 3.0 [ 0.540510] xen: registering gsi 21 triggering 0 polarity 1 [ 0.540541] xen: --> pirq=21 -> irq=21 (gsi=21) [ 0.550877] ahci 0000:00:1f.2: AHCI vers 0001.0300, 32 command slots, 3 Gbps, SATA mode [ 0.551036] ahci 0000:00:1f.2: 6/6 ports implemented (port mask 0x3f) [ 0.552827] ahci 0000:00:1f.2: flags: 64bit ncq sntf pm led clo pio slum part ems apst [ 0.568529] scsi host0: ahci [ 0.569006] scsi host1: ahci [ 0.569500] scsi host2: ahci [ 0.569814] scsi host3: ahci [ 0.570128] scsi host4: ahci [ 0.570443] scsi host5: ahci [ 0.570585] ata1: SATA max UDMA/133 abar m2048@0xc1b40000 port 0xc1b40100 irq 53 lpm-pol 0 [ 0.570792] ata2: SATA max UDMA/133 abar m2048@0xc1b40000 port 0xc1b40180 irq 53 lpm-pol 0 [ 0.570940] ata3: SATA max UDMA/133 abar m2048@0xc1b40000 port 0xc1b40200 irq 53 lpm-pol 0 [ 0.571086] ata4: SATA max UDMA/133 abar m2048@0xc1b40000 port 0xc1b40280 irq 53 lpm-pol 0 [ 0.571232] ata5: SATA max UDMA/133 abar m2048@0xc1b40000 port 0xc1b40300 irq 53 lpm-pol 0 [ 0.571379] ata6: SATA max UDMA/133 abar m2048@0xc1b40000 port 0xc1b40380 irq 53 lpm-pol 0 [ 0.571786] tun: Universal TUN/TAP device driver, 1.6 [ 0.572014] e100: Intel(R) PRO/100 Network Driver [ 0.572179] e100: Copyright(c) 1999-2006 Intel Corporation [ 0.572310] sky2: driver version 1.30 [ 0.572443] xen_netfront: Initialising Xen virtual ethernet driver [ 0.572724] usbcore: registered new interface driver usblp [ 0.572861] usbcore: registered new interface driver usb-storage [ 0.572986] xen: registering gsi 20 triggering 0 polarity 1 [ 0.572999] Already setup the GSI :20 [ 0.573000] xen: registering gsi 22 triggering 0 polarity 1 [ 0.573014] i8042: PNP: No PS/2 controller found. [ 0.573086] ehci-pci 0000:00:1d.0: EHCI Host Controller [ 0.573129] Already setup the GSI :22 [ 0.573155] ehci-pci 0000:00:1d.0: new USB bus registered, assigned bus number 1 [ 0.573677] ehci-pci 0000:00:1d.0: debug port 2 [ 0.574847] rtc_cmos 00:01: RTC can wake from S4 [ 0.575593] rtc_cmos 00:01: registered as rtc0 [ 0.575785] rtc_cmos 00:01: alarms up to one month, y3k, 242 bytes nvram [ 0.575955] device-mapper: uevent: version 1.0.3 [ 0.576068] xen: registering gsi 22 triggering 0 polarity 1 [ 0.576086] Already setup the GSI :22 [ 0.576140] device-mapper: ioctl: 4.48.0-ioctl (2023-03-01) initialised: dm-devel@lists.linux.dev [ 0.576338] i801_smbus 0000:00:1f.3: SMBus using PCI interrupt [ 0.576454] intel_pstate: CPU model not supported [ 0.576722] hid: raw HID events driver (C) Jiri Kosina [ 0.576973] usbcore: registered new interface driver usbhid [ 0.577113] usbhid: USB HID core driver [ 0.577534] Initializing XFRM netlink socket [ 0.577796] NET: Registered PF_INET6 protocol family [ 0.577831] ehci-pci 0000:00:1d.0: irq 20, io mem 0xc1b50000 [ 0.578225] Segment Routing with IPv6 [ 0.578349] In-situ OAM (IOAM) with IPv6 [ 0.578430] i2c i2c-0: Successfully instantiated SPD at 0x51 [ 0.578495] sit: IPv6, IPv4 and MPLS over IPv4 tunneling driver [ 0.578840] NET: Registered PF_PACKET protocol family [ 0.578981] 9pnet: Installing 9P2000 support [ 0.579112] Key type dns_resolver registered [ 0.579507] IPI shorthand broadcast: enabled [ 0.581859] sched_clock: Marking stable (554006463, 27756370)->(586652570, -4889737) [ 0.582324] Timer migration: 1 hierarchy levels; 8 children per group; 1 crossnode level [ 0.582751] registered taskstats version 1 [ 0.582877] Loading compiled-in X.509 certificates [ 0.584114] PM: Magic number: 12:114:644 [ 0.584296] printk: legacy console [netcon0] enabled [ 0.584414] netconsole: network logging started [ 0.584738] cfg80211: Loading compiled-in X.509 certificates for regulatory database [ 0.584901] ehci-pci 0000:00:1d.0: USB 2.0 started, EHCI 1.00 [ 0.585086] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 6.10 [ 0.585237] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 0.585381] usb usb1: Product: EHCI Host Controller [ 0.585498] usb usb1: Manufacturer: Linux 6.10.0-rc4+ ehci_hcd [ 0.585615] usb usb1: SerialNumber: 0000:00:1d.0 [ 0.585925] hub 1-0:1.0: USB hub found [ 0.586060] hub 1-0:1.0: 2 ports detected [ 0.586343] ehci-pci 0000:00:1a.0: EHCI Host Controller [ 0.586545] ehci-pci 0000:00:1a.0: new USB bus registered, assigned bus number 2 [ 0.586728] ehci-pci 0000:00:1a.0: debug port 2 [ 0.590813] ehci-pci 0000:00:1a.0: irq 22, io mem 0xc1b60000 [ 0.597850] ehci-pci 0000:00:1a.0: USB 2.0 started, EHCI 1.00 [ 0.598065] Freeing initrd memory: 20116K [ 0.598179] usb usb2: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 6.10 [ 0.598182] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 0.598507] usb usb2: Product: EHCI Host Controller [ 0.598624] usb usb2: Manufacturer: Linux 6.10.0-rc4+ ehci_hcd [ 0.598751] usb usb2: SerialNumber: 0000:00:1a.0 [ 0.599069] hub 2-0:1.0: USB hub found [ 0.599199] hub 2-0:1.0: 2 ports detected [ 0.610323] Loaded X.509 cert 'sforshee: 00b28ddf47aef9cea7' [ 0.610632] Loaded X.509 cert 'wens: 61c038651aabdcf94bd0ac7ff06c7248db18c600' [ 0.610808] ALSA device list: [ 0.610917] No soundcards found. [ 0.611531] cfg80211: loaded regulatory.db is malformed or signature is missing/invalid [ 0.825870] usb 1-1: new high-speed USB device number 2 using ehci-pci [ 0.841852] usb 2-1: new high-speed USB device number 2 using ehci-pci [ 0.878249] ata3: SATA link up 1.5 Gbps (SStatus 113 SControl 300) [ 0.878391] ata6: SATA link down (SStatus 0 SControl 300) [ 0.878533] ata5: SATA link down (SStatus 0 SControl 300) [ 0.878672] ata4: SATA link down (SStatus 0 SControl 300) [ 0.878830] ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300) [ 0.879102] ata2: SATA link down (SStatus 0 SControl 300) [ 0.880804] ata1.00: ATA-8: WDC WD1003FBYZ-010FB0, 01.01V03, max UDMA/133 [ 0.881474] ata1.00: 1953525168 sectors, multi 16: LBA48 NCQ (depth 32), AA [ 0.881871] ata3.00: ATAPI: Slimtype DVD A DS8ABSH, AP52, max UDMA/100 [ 0.884252] ata1.00: configured for UDMA/133 [ 0.884599] scsi 0:0:0:0: Direct-Access ATA WDC WD1003FBYZ-0 1V03 PQ: 0 ANSI: 5 [ 0.885565] sd 0:0:0:0: Attached scsi generic sg0 type 0 [ 0.885573] sd 0:0:0:0: [sda] 1953525168 512-byte logical blocks: (1.00 TB/932 GiB) [ 0.885871] sd 0:0:0:0: [sda] Write Protect is off [ 0.886036] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00 [ 0.886071] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 0.886284] sd 0:0:0:0: [sda] Preferred minimum I/O size 512 bytes [ 0.888353] ata3.00: configured for UDMA/100 [ 0.896072] scsi 2:0:0:0: CD-ROM Slimtype DVD A DS8ABSH AP52 PQ: 0 ANSI: 5 [ 0.925647] sda: sda1 sda2 < sda5 > [ 0.926180] sd 0:0:0:0: [sda] Attached SCSI disk [ 0.930433] sr 2:0:0:0: [sr0] scsi3-mmc drive: 24x/24x writer dvd-ram cd/rw xa/form2 cdda tray [ 0.930588] cdrom: Uniform CD-ROM driver Revision: 3.20 [ 0.951103] sr 2:0:0:0: Attached scsi CD-ROM sr0 [ 0.951262] sr 2:0:0:0: Attached scsi generic sg1 type 5 [ 0.953351] Freeing unused kernel image (initmem) memory: 2680K [ 0.953489] Write protecting the kernel read-only data: 24576k [ 0.954170] usb 1-1: New USB device found, idVendor=8087, idProduct=0024, bcdDevice= 0.00 [ 0.954321] usb 1-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0 [ 0.954698] hub 1-1:1.0: USB hub found [ 0.954911] hub 1-1:1.0: 6 ports detected [ 0.970166] usb 2-1: New USB device found, idVendor=8087, idProduct=0024, bcdDevice= 0.00 [ 0.970316] usb 2-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0 [ 0.970693] hub 2-1:1.0: USB hub found [ 0.970913] hub 2-1:1.0: 6 ports detected [ 0.975474] Freeing unused kernel image (rodata/data gap) memory: 2028K [ 1.149959] x86/mm: Checked W+X mappings: passed, no W+X pages found. [ 1.150084] Run /init as init process [ 1.150195] with arguments: [ 1.150196] /init [ 1.150197] placeholder [ 1.150198] with environment: [ 1.150198] HOME=/ [ 1.150199] TERM=linux [ 1.487458] e1000e: Intel(R) PRO/1000 Network Driver [ 1.487586] e1000e: Copyright(c) 1999 - 2015 Intel Corporation. [ 1.487901] xen: registering gsi 19 triggering 0 polarity 1 [ 1.487930] xen: --> pirq=19 -> irq=19 (gsi=19) [ 1.488184] e1000e 0000:00:19.0: Interrupt Throttling Rate (ints/sec) set to dynamic conservative mode [ 1.595398] e1000e 0000:00:19.0 0000:00:19.0 (uninitialized): registered PHC clock [ 1.694397] e1000e 0000:00:19.0 eth0: (PCI Express:2.5GT/s:Width x1) 00:1e:67:96:a5:3d [ 1.694606] e1000e 0000:00:19.0 eth0: Intel(R) PRO/1000 Network Connection [ 1.694779] e1000e 0000:00:19.0 eth0: MAC: 10, PHY: 11, PBA No: 0050FF-0FF [ 1.695014] xen: registering gsi 16 triggering 0 polarity 1 [ 1.695022] Already setup the GSI :16 [ 1.695450] e1000e 0000:02:00.0: Interrupt Throttling Rate (ints/sec) set to dynamic conservative mode [ 1.738714] e1000e 0000:02:00.0 0000:02:00.0 (uninitialized): registered PHC clock [ 1.785352] e1000e 0000:02:00.0 eth1: (PCI Express:2.5GT/s:Width x1) 00:1e:67:96:a5:3c [ 1.785503] e1000e 0000:02:00.0 eth1: Intel(R) PRO/1000 Network Connection [ 1.785708] e1000e 0000:02:00.0 eth1: MAC: 3, PHY: 8, PBA No: 1000FF-0FF [ 1.787837] e1000e 0000:00:19.0 enx001e6796a53d: renamed from eth0 [ 1.788549] e1000e 0000:02:00.0 enx001e6796a53c: renamed from eth1 [ 1.844785] random: crng init done [ 2.470292] EXT4-fs (dm-0): mounting ext3 file system using the ext4 subsystem [ 2.475072] EXT4-fs (dm-0): mounted filesystem cc7b7096-3db0-44b6-954c-bea09f30ded2 ro with ordered data mode. Quota mode: none. [ 5.925604] EXT4-fs (dm-0): re-mounted cc7b7096-3db0-44b6-954c-bea09f30ded2 r/w. Quota mode: none. [ 7.489291] EXT4-fs (sda1): mounting ext3 file system using the ext4 subsystem [ 7.499886] EXT4-fs (sda1): mounted filesystem 16ee8819-d734-4824-97ec-3af377d4494f r/w with ordered data mode. Quota mode: none. [ 7.583326] Adding 1949692k swap on /dev/mapper/italia1--vg-swap_1. Priority:-2 extents:1 across:1949692k [ 9.416895] xenbr0: port 1(enx001e6796a53c) entered blocking state [ 9.417046] xenbr0: port 1(enx001e6796a53c) entered disabled state [ 9.417177] e1000e 0000:02:00.0 enx001e6796a53c: entered allmulticast mode [ 9.417332] e1000e 0000:02:00.0 enx001e6796a53c: entered promiscuous mode [ 11.860894] e1000e 0000:02:00.0 enx001e6796a53c: NIC Link is Up 1000 Mbps Full Duplex, Flow Control: None [ 11.861443] xenbr0: port 1(enx001e6796a53c) entered blocking state [ 11.861572] xenbr0: port 1(enx001e6796a53c) entered forwarding state