[ 0.000000] microcode: microcode updated early to revision 0x42e, date = 2019-03-14 [ 0.000000] Linux version 6.1.0-21-amd64 (debian-kernel@lists.debian.org) (gcc-12 (Debian 12.2.0-14) 12.2.0, GNU ld (GNU Binutils for Debian) 2.40) #1 SMP PREEMPT_DYNAMIC Debian 6.1.90-1 (2024-05-03) [ 0.000000] Command line: BOOT_IMAGE=/vmlinuz-6.1.0-21-amd64 root=/dev/mapper/fiano1--vg-root ro console=ttyS0,115200n8 [ 0.000000] BIOS-provided physical RAM map: [ 0.000000] BIOS-e820: [mem 0x0000000000000000-0x000000000009abff] usable [ 0.000000] BIOS-e820: [mem 0x000000000009ac00-0x000000000009ffff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000000e0000-0x00000000000fffff] reserved [ 0.000000] BIOS-e820: [mem 0x0000000000100000-0x000000007de2bfff] usable [ 0.000000] BIOS-e820: [mem 0x000000007de2c000-0x000000007debafff] reserved [ 0.000000] BIOS-e820: [mem 0x000000007debb000-0x000000007dfc3fff] ACPI data [ 0.000000] BIOS-e820: [mem 0x000000007dfc4000-0x000000007e1e0fff] ACPI NVS [ 0.000000] BIOS-e820: [mem 0x000000007e1e1000-0x000000007f36afff] reserved [ 0.000000] BIOS-e820: [mem 0x000000007f36b000-0x000000007f7fffff] ACPI NVS [ 0.000000] BIOS-e820: [mem 0x0000000080000000-0x000000008fffffff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000fed1c000-0x00000000fed3ffff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000ff000000-0x00000000ffffffff] reserved [ 0.000000] BIOS-e820: [mem 0x0000000100000000-0x000000027fffffff] usable [ 0.000000] NX (Execute Disable) protection: active [ 0.000000] SMBIOS 2.7 present. [ 0.000000] DMI: Supermicro X9DBL-3F/X9DBL-iF/X9DBL-3F/X9DBL-iF, BIOS 3.00 12/06/2013 [ 0.000000] tsc: Fast TSC calibration using PIT [ 0.000000] tsc: Detected 1799.979 MHz processor [ 0.000873] e820: update [mem 0x00000000-0x00000fff] usable ==> reserved [ 0.000878] e820: remove [mem 0x000a0000-0x000fffff] usable [ 0.000888] last_pfn = 0x280000 max_arch_pfn = 0x400000000 [ 0.001028] x86/PAT: Configuration [0-7]: WB WC UC- UC WB WP UC- WT [ 0.001680] e820: update [mem 0x80000000-0xffffffff] usable ==> reserved [ 0.001690] last_pfn = 0x7de2c max_arch_pfn = 0x400000000 [ 0.018713] found SMP MP-table at [mem 0x000fd8e0-0x000fd8ef] [ 0.018738] Using GB pages for direct mapping [ 0.019178] RAMDISK: [mem 0x3329b000-0x35944fff] [ 0.019187] ACPI: Early table checksum verification disabled [ 0.019191] ACPI: RSDP 0x00000000000F04A0 000024 (v02 SUPERM) [ 0.019198] ACPI: XSDT 0x000000007DEF1088 00008C (v01 SUPERM SMCI--MB 00000001 AMI 00010013) [ 0.019206] ACPI: FACP 0x000000007DEFBAB0 0000F4 (v04 SUPERM SMCI--MB 00000001 AMI 00010013) [ 0.019214] ACPI: DSDT 0x000000007DEF11A0 00A910 (v02 SUPERM SMCI--MB 00000000 INTL 20091112) [ 0.019220] ACPI: FACS 0x000000007E1D8080 000040 [ 0.019224] ACPI: APIC 0x000000007DEFBBA8 000090 (v03 00000001 AMI 00010013) [ 0.019229] ACPI: FPDT 0x000000007DEFBC38 000044 (v01 00000001 AMI 00010013) [ 0.019234] ACPI: HPET 0x000000007DEFBC80 000038 (v01 SUPERM SMCI--MB 00000001 AMI. 00000005) [ 0.019239] ACPI: PRAD 0x000000007DEFBCB8 0000BE (v02 PRADID PRADTID 00000001 MSFT 04000000) [ 0.019245] ACPI: SPMI 0x000000007DEFBD78 000040 (v05 A M I OEMSPMI 00000000 AMI. 00000000) [ 0.019249] ACPI: SSDT 0x000000007DEFBDB8 0C7AE8 (v02 INTEL CpuPm 00004000 INTL 20091112) [ 0.019255] ACPI: EINJ 0x000000007DFC38A0 000130 (v01 AMI AMI EINJ 00000000 00000000) [ 0.019260] ACPI: ERST 0x000000007DFC39D0 000230 (v01 AMIER AMI ERST 00000000 00000000) [ 0.019265] ACPI: HEST 0x000000007DFC3C00 0000A8 (v01 AMI AMI HEST 00000000 00000000) [ 0.019271] ACPI: BERT 0x000000007DFC3CA8 000030 (v01 AMI AMI BERT 00000000 00000000) [ 0.019276] ACPI: DMAR 0x000000007DFC3CD8 0000B4 (v01 A M I OEMDMAR 00000001 INTL 00000001) [ 0.019281] ACPI: MCFG 0x000000007DFC3D90 00003C (v01 SUPERM SMCI--MB 00000001 MSFT 00000097) [ 0.019285] ACPI: Reserving FACP table memory at [mem 0x7defbab0-0x7defbba3] [ 0.019287] ACPI: Reserving DSDT table memory at [mem 0x7def11a0-0x7defbaaf] [ 0.019288] ACPI: Reserving FACS table memory at [mem 0x7e1d8080-0x7e1d80bf] [ 0.019290] ACPI: Reserving APIC table memory at [mem 0x7defbba8-0x7defbc37] [ 0.019291] ACPI: Reserving FPDT table memory at [mem 0x7defbc38-0x7defbc7b] [ 0.019293] ACPI: Reserving HPET table memory at [mem 0x7defbc80-0x7defbcb7] [ 0.019294] ACPI: Reserving PRAD table memory at [mem 0x7defbcb8-0x7defbd75] [ 0.019295] ACPI: Reserving SPMI table memory at [mem 0x7defbd78-0x7defbdb7] [ 0.019297] ACPI: Reserving SSDT table memory at [mem 0x7defbdb8-0x7dfc389f] [ 0.019298] ACPI: Reserving EINJ table memory at [mem 0x7dfc38a0-0x7dfc39cf] [ 0.019299] ACPI: Reserving ERST table memory at [mem 0x7dfc39d0-0x7dfc3bff] [ 0.019301] ACPI: Reserving HEST table memory at [mem 0x7dfc3c00-0x7dfc3ca7] [ 0.019302] ACPI: Reserving BERT table memory at [mem 0x7dfc3ca8-0x7dfc3cd7] [ 0.019304] ACPI: Reserving DMAR table memory at [mem 0x7dfc3cd8-0x7dfc3d8b] [ 0.019305] ACPI: Reserving MCFG table memory at [mem 0x7dfc3d90-0x7dfc3dcb] [ 0.019375] No NUMA configuration found [ 0.019377] Faking a node at [mem 0x0000000000000000-0x000000027fffffff] [ 0.019393] NODE_DATA(0) allocated [mem 0x27ffd5000-0x27fffffff] [ 0.019862] Zone ranges: [ 0.019863] DMA [mem 0x0000000000001000-0x0000000000ffffff] [ 0.019866] DMA32 [mem 0x0000000001000000-0x00000000ffffffff] [ 0.019868] Normal [mem 0x0000000100000000-0x000000027fffffff] [ 0.019871] Device empty [ 0.019873] Movable zone start for each node [ 0.019877] Early memory node ranges [ 0.019878] node 0: [mem 0x0000000000001000-0x0000000000099fff] [ 0.019880] node 0: [mem 0x0000000000100000-0x000000007de2bfff] [ 0.019882] node 0: [mem 0x0000000100000000-0x000000027fffffff] [ 0.019885] Initmem setup node 0 [mem 0x0000000000001000-0x000000027fffffff] [ 0.019893] On node 0, zone DMA: 1 pages in unavailable ranges [ 0.019950] On node 0, zone DMA: 102 pages in unavailable ranges [ 0.028066] On node 0, zone Normal: 8660 pages in unavailable ranges [ 0.028360] ACPI: PM-Timer IO Port: 0x408 [ 0.028372] ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1]) [ 0.028374] ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1]) [ 0.028376] ACPI: LAPIC_NMI (acpi_id[0x02] high edge lint[0x1]) [ 0.028377] ACPI: LAPIC_NMI (acpi_id[0x03] high edge lint[0x1]) [ 0.028389] IOAPIC[0]: apic_id 0, version 32, address 0xfec00000, GSI 0-23 [ 0.028395] IOAPIC[1]: apic_id 2, version 32, address 0xfec01000, GSI 24-47 [ 0.028399] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl) [ 0.028402] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level) [ 0.028409] ACPI: Using ACPI (MADT) for SMP configuration information [ 0.028411] ACPI: HPET id: 0x8086a701 base: 0xfed00000 [ 0.028417] TSC deadline timer available [ 0.028419] smpboot: Allowing 4 CPUs, 0 hotplug CPUs [ 0.028440] PM: hibernation: Registered nosave memory: [mem 0x00000000-0x00000fff] [ 0.028443] PM: hibernation: Registered nosave memory: [mem 0x0009a000-0x0009afff] [ 0.028444] PM: hibernation: Registered nosave memory: [mem 0x0009b000-0x0009ffff] [ 0.028446] PM: hibernation: Registered nosave memory: [mem 0x000a0000-0x000dffff] [ 0.028447] PM: hibernation: Registered nosave memory: [mem 0x000e0000-0x000fffff] [ 0.028449] PM: hibernation: Registered nosave memory: [mem 0x7de2c000-0x7debafff] [ 0.028450] PM: hibernation: Registered nosave memory: [mem 0x7debb000-0x7dfc3fff] [ 0.028452] PM: hibernation: Registered nosave memory: [mem 0x7dfc4000-0x7e1e0fff] [ 0.028453] PM: hibernation: Registered nosave memory: [mem 0x7e1e1000-0x7f36afff] [ 0.028454] PM: hibernation: Registered nosave memory: [mem 0x7f36b000-0x7f7fffff] [ 0.028456] PM: hibernation: Registered nosave memory: [mem 0x7f800000-0x7fffffff] [ 0.028457] PM: hibernation: Registered nosave memory: [mem 0x80000000-0x8fffffff] [ 0.028458] PM: hibernation: Registered nosave memory: [mem 0x90000000-0xfed1bfff] [ 0.028459] PM: hibernation: Registered nosave memory: [mem 0xfed1c000-0xfed3ffff] [ 0.028460] PM: hibernation: Registered nosave memory: [mem 0xfed40000-0xfeffffff] [ 0.028462] PM: hibernation: Registered nosave memory: [mem 0xff000000-0xffffffff] [ 0.028464] [mem 0x90000000-0xfed1bfff] available for PCI devices [ 0.028466] Booting paravirtualized kernel on bare hardware [ 0.028469] clocksource: refined-jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645519600211568 ns [ 0.035924] setup_percpu: NR_CPUS:8192 nr_cpumask_bits:4 nr_cpu_ids:4 nr_node_ids:1 [ 0.036321] percpu: Embedded 61 pages/cpu s212992 r8192 d28672 u524288 [ 0.036330] pcpu-alloc: s212992 r8192 d28672 u524288 alloc=1*2097152 [ 0.036334] pcpu-alloc: [0] 0 1 2 3 [ 0.036374] Fallback order for Node 0: 0 [ 0.036378] Built 1 zonelists, mobility grouping on. Total pages: 2055603 [ 0.036381] Policy zone: Normal [ 0.036382] Kernel command line: BOOT_IMAGE=/vmlinuz-6.1.0-21-amd64 root=/dev/mapper/fiano1--vg-root ro console=ttyS0,115200n8 [ 0.036453] Unknown kernel command line parameters "BOOT_IMAGE=/vmlinuz-6.1.0-21-amd64", will be passed to user space. [ 0.036467] random: crng init done [ 0.037516] Dentry cache hash table entries: 1048576 (order: 11, 8388608 bytes, linear) [ 0.038084] Inode-cache hash table entries: 524288 (order: 10, 4194304 bytes, linear) [ 0.038172] mem auto-init: stack:all(zero), heap alloc:on, heap free:off [ 0.038185] software IO TLB: area num 4. [ 0.080086] Memory: 2087172K/8353556K available (14342K kernel code, 2332K rwdata, 9060K rodata, 2796K init, 17404K bss, 304404K reserved, 0K cma-reserved) [ 0.080299] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1 [ 0.080320] Kernel/User page tables isolation: enabled [ 0.080373] ftrace: allocating 40220 entries in 158 pages [ 0.090720] ftrace: allocated 158 pages with 5 groups [ 0.091672] Dynamic Preempt: voluntary [ 0.091715] rcu: Preemptible hierarchical RCU implementation. [ 0.091716] rcu: RCU restricting CPUs from NR_CPUS=8192 to nr_cpu_ids=4. [ 0.091718] Trampoline variant of Tasks RCU enabled. [ 0.091719] Rude variant of Tasks RCU enabled. [ 0.091719] Tracing variant of Tasks RCU enabled. [ 0.091721] rcu: RCU calculated value of scheduler-enlistment delay is 25 jiffies. [ 0.091722] rcu: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=4 [ 0.099049] NR_IRQS: 524544, nr_irqs: 864, preallocated irqs: 16 [ 0.099257] rcu: srcu_init: Setting srcu_struct sizes based on contention. [ 0.103764] Console: colour VGA+ 80x25 [ 1.028163] printk: console [ttyS0] enabled [ 1.032370] ACPI: Core revision 20220331 [ 1.037021] clocksource: hpet: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 133484882848 ns [ 1.046159] APIC: Switch to symmetric I/O mode setup [ 1.051139] DMAR: Host address width 46 [ 1.054988] DMAR: DRHD base: 0x000000fbffc000 flags: 0x1 [ 1.060315] DMAR: dmar0: reg_base_addr fbffc000 ver 1:0 cap d2078c106f0466 ecap f020de [ 1.068236] DMAR: RMRR base: 0x0000007de91000 end: 0x0000007de9dfff [ 1.074502] DMAR: ATSR flags: 0x0 [ 1.077816] DMAR: RHSA base: 0x000000fbffc000 proximity domain: 0x0 [ 1.084091] DMAR-IR: IOAPIC id 0 under DRHD base 0xfbffc000 IOMMU 0 [ 1.090450] DMAR-IR: IOAPIC id 2 under DRHD base 0xfbffc000 IOMMU 0 [ 1.096811] DMAR-IR: HPET id 0 under DRHD base 0xfbffc000 [ 1.102209] DMAR-IR: Queued invalidation will be enabled to support x2apic and Intr-remapping. [ 1.111338] DMAR-IR: Enabled IRQ remapping in x2apic mode [ 1.116738] x2apic enabled [ 1.119463] Switched APIC routing to cluster x2apic. [ 1.124976] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1 [ 1.150159] clocksource: tsc-early: mask: 0xffffffffffffffff max_cycles: 0x19f215c4f7a, max_idle_ns: 440795225104 ns [ 1.160675] Calibrating delay loop (skipped), value calculated using timer frequency.. 3599.95 BogoMIPS (lpj=7199916) [ 1.164705] CPU0: Thermal monitoring enabled (TM1) [ 1.168758] process: using mwait in idle threads [ 1.172675] Last level iTLB entries: 4KB 512, 2MB 8, 4MB 8 [ 1.176672] Last level dTLB entries: 4KB 512, 2MB 0, 4MB 0, 1GB 4 [ 1.180675] Spectre V1 : Mitigation: usercopy/swapgs barriers and __user pointer sanitization [ 1.184674] Spectre V2 : Mitigation: Retpolines [ 1.188672] Spectre V2 : Spectre v2 / SpectreRSB mitigation: Filling RSB on context switch [ 1.192672] Spectre V2 : Spectre v2 / SpectreRSB : Filling RSB on VMEXIT [ 1.196672] Spectre V2 : Enabling Restricted Speculation for firmware calls [ 1.200674] Spectre V2 : mitigation: Enabling conditional Indirect Branch Prediction Barrier [ 1.204673] Speculative Store Bypass: Mitigation: Speculative Store Bypass disabled via prctl [ 1.208673] MDS: Mitigation: Clear CPU buffers [ 1.212672] MMIO Stale Data: Unknown: No mitigations [ 1.216678] x86/fpu: Supporting XSAVE feature 0x001: 'x87 floating point registers' [ 1.220672] x86/fpu: Supporting XSAVE feature 0x002: 'SSE registers' [ 1.224672] x86/fpu: Supporting XSAVE feature 0x004: 'AVX registers' [ 1.228673] x86/fpu: xstate_offset[2]: 576, xstate_sizes[2]: 256 [ 1.232672] x86/fpu: Enabled xstate features 0x7, context size is 832 bytes, using 'standard' format. [ 1.261493] Freeing SMP alternatives memory: 36K [ 1.264673] pid_max: default: 32768 minimum: 301 [ 1.268707] LSM: Security Framework initializing [ 1.272691] landlock: Up and running. [ 1.276672] Yama: disabled by default; enable with sysctl kernel.yama.* [ 1.280702] AppArmor: AppArmor initialized [ 1.284674] TOMOYO Linux initialized [ 1.288679] LSM support for eBPF active [ 1.292718] Mount-cache hash table entries: 16384 (order: 5, 131072 bytes, linear) [ 1.296688] Mountpoint-cache hash table entries: 16384 (order: 5, 131072 bytes, linear) [ 1.301296] smpboot: CPU0: Intel(R) Xeon(R) CPU E5-2403 v2 @ 1.80GHz (family: 0x6, model: 0x3e, stepping: 0x4) [ 1.304863] cblist_init_generic: Setting adjustable number of callback queues. [ 1.308673] cblist_init_generic: Setting shift to 2 and lim to 1. [ 1.312704] cblist_init_generic: Setting adjustable number of callback queues. [ 1.316673] cblist_init_generic: Setting shift to 2 and lim to 1. [ 1.320695] cblist_init_generic: Setting adjustable number of callback queues. [ 1.324673] cblist_init_generic: Setting shift to 2 and lim to 1. [ 1.328693] Performance Events: PEBS fmt1+, IvyBridge events, 16-deep LBR, full-width counters, Intel PMU driver. [ 1.332674] ... version: 3 [ 1.336672] ... bit width: 48 [ 1.340672] ... generic registers: 8 [ 1.344672] ... value mask: 0000ffffffffffff [ 1.348672] ... max period: 00007fffffffffff [ 1.352672] ... fixed-purpose events: 3 [ 1.356672] ... event mask: 00000007000000ff [ 1.360904] signal: max sigframe size: 1776 [ 1.364697] Estimated ratio of average max frequency by base frequency (times 1024): 1024 [ 1.368706] rcu: Hierarchical SRCU implementation. [ 1.372673] rcu: Max phase no-delay instances is 1000. [ 1.377353] NMI watchdog: Enabled. Permanently consumes one hw-PMU counter. [ 1.380766] smp: Bringing up secondary CPUs ... [ 1.384822] x86: Booting SMP configuration: [ 1.388678] .... node #0, CPUs: #1 #2 #3 [ 1.403823] smp: Brought up 1 node, 4 CPUs [ 1.408674] smpboot: Max logical packages: 1 [ 1.412673] smpboot: Total of 4 processors activated (14399.83 BogoMIPS) [ 1.437620] node 0 deferred pages initialised in 20ms [ 1.441111] devtmpfs: initialized [ 1.444753] x86/mm: Memory block size: 128MB [ 1.449724] ACPI: PM: Registering ACPI NVS region [mem 0x7dfc4000-0x7e1e0fff] (2215936 bytes) [ 1.452724] ACPI: PM: Registering ACPI NVS region [mem 0x7f36b000-0x7f7fffff] (4804608 bytes) [ 1.456827] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645041785100000 ns [ 1.460686] futex hash table entries: 1024 (order: 4, 65536 bytes, linear) [ 1.464735] pinctrl core: initialized pinctrl subsystem [ 1.469569] NET: Registered PF_NETLINK/PF_ROUTE protocol family [ 1.472952] DMA: preallocated 1024 KiB GFP_KERNEL pool for atomic allocations [ 1.476826] DMA: preallocated 1024 KiB GFP_KERNEL|GFP_DMA pool for atomic allocations [ 1.480824] DMA: preallocated 1024 KiB GFP_KERNEL|GFP_DMA32 pool for atomic allocations [ 1.484682] audit: initializing netlink subsys (disabled) [ 1.488687] audit: type=2000 audit(1719162532.400:1): state=initialized audit_enabled=0 res=1 [ 1.488824] thermal_sys: Registered thermal governor 'fair_share' [ 1.492677] thermal_sys: Registered thermal governor 'bang_bang' [ 1.496674] thermal_sys: Registered thermal governor 'step_wise' [ 1.500673] thermal_sys: Registered thermal governor 'user_space' [ 1.504672] thermal_sys: Registered thermal governor 'power_allocator' [ 1.508690] cpuidle: using governor ladder [ 1.516677] cpuidle: using governor menu [ 1.520650] ACPI FADT declares the system doesn't support PCIe ASPM, so disable it [ 1.520675] acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5 [ 1.524777] PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0x80000000-0x8fffffff] (base 0x80000000) [ 1.528675] PCI: MMCONFIG at [mem 0x80000000-0x8fffffff] reserved in E820 [ 1.532683] pmd_set_huge: Cannot satisfy [mem 0x80000000-0x80200000] with a huge-page mapping due to MTRR override. [ 1.537094] PCI: Using configuration type 1 for base access [ 1.540770] core: PMU erratum BJ122, BV98, HSD29 workaround disabled, HT off [ 1.546016] kprobes: kprobe jump-optimization is enabled. All kprobes are optimized if possible. [ 1.548718] HugeTLB: registered 1.00 GiB page size, pre-allocated 0 pages [ 1.552675] HugeTLB: 16380 KiB vmemmap can be freed for a 1.00 GiB page [ 1.560674] HugeTLB: registered 2.00 MiB page size, pre-allocated 0 pages [ 1.568672] HugeTLB: 28 KiB vmemmap can be freed for a 2.00 MiB page [ 1.574511] ACPI: Added _OSI(Module Device) [ 1.576677] ACPI: Added _OSI(Processor Device) [ 1.580674] ACPI: Added _OSI(3.0 _SCP Extensions) [ 1.588674] ACPI: Added _OSI(Processor Aggregator Device) [ 1.707673] ACPI: 2 ACPI AML tables successfully acquired and loaded [ 1.738260] ACPI: Interpreter enabled [ 1.740695] ACPI: PM: (supports S0 S1 S4 S5) [ 1.744674] ACPI: Using IOAPIC for interrupt routing [ 1.752780] HEST: Table parsing has been initialized. [ 1.756795] GHES: APEI firmware first mode is enabled by WHEA _OSC. [ 1.760677] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug [ 1.772673] PCI: Using E820 reservations for host bridge windows [ 1.777229] ACPI: Enabled 5 GPEs in block 00 to 3F [ 1.784782] ACPI BIOS Error (bug): Could not resolve symbol [\_SB.PRAD], AE_NOT_FOUND (20220331/psargs-330) [ 1.788677] ACPI Error: Aborting method \_GPE._L24 due to previous error (AE_NOT_FOUND) (20220331/psparse-529) [ 1.792681] ACPI Error: AE_NOT_FOUND, while evaluating GPE method [_L24] (20220331/evgpe-511) [ 1.796671] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-fe]) [ 1.800671] acpi PNP0A08:00: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI HPX-Type3] [ 1.808766] acpi PNP0A08:00: _OSC: platform does not support [SHPCHotplug PME AER LTR] [ 1.816829] acpi PNP0A08:00: _OSC: OS now controls [PCIeHotplug PCIeCapability] [ 1.824674] acpi PNP0A08:00: FADT indicates ASPM is unsupported, using BIOS configuration [ 1.833035] PCI host bridge to bus 0000:00 [ 1.836675] pci_bus 0000:00: root bus resource [io 0x0000-0x03af window] [ 1.844673] pci_bus 0000:00: root bus resource [io 0x03e0-0x0cf7 window] [ 1.852673] pci_bus 0000:00: root bus resource [io 0x03b0-0x03df window] [ 1.856673] pci_bus 0000:00: root bus resource [io 0x0d00-0xffff window] [ 1.864673] pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000dffff window] [ 1.872673] pci_bus 0000:00: root bus resource [mem 0xfed08000-0xfed08fff window] [ 1.880673] pci_bus 0000:00: root bus resource [mem 0xfed0e000-0xfed0ffff window] [ 1.888673] pci_bus 0000:00: root bus resource [mem 0x80000000-0xfbffffff window] [ 1.896673] pci_bus 0000:00: root bus resource [bus 00-fe] [ 1.900704] pci 0000:00:00.0: [8086:0e00] type 00 class 0x060000 [ 1.904756] pci 0000:00:00.0: PME# supported from D0 D3hot D3cold [ 1.912798] pci 0000:00:01.0: [8086:0e02] type 01 class 0x060400 [ 1.920773] pci 0000:00:01.0: PME# supported from D0 D3hot D3cold [ 1.924841] pci 0000:00:01.1: [8086:0e03] type 01 class 0x060400 [ 1.932771] pci 0000:00:01.1: PME# supported from D0 D3hot D3cold [ 1.936841] pci 0000:00:03.0: [8086:0e08] type 01 class 0x060400 [ 1.944711] pci 0000:00:03.0: enabling Extended Tags [ 1.948738] pci 0000:00:03.0: PME# supported from D0 D3hot D3cold [ 1.956827] pci 0000:00:04.0: [8086:0e20] type 00 class 0x088000 [ 1.960690] pci 0000:00:04.0: reg 0x10: [mem 0xfbb1c000-0xfbb1ffff 64bit] [ 1.968819] pci 0000:00:04.1: [8086:0e21] type 00 class 0x088000 [ 1.972689] pci 0000:00:04.1: reg 0x10: [mem 0xfbb18000-0xfbb1bfff 64bit] [ 1.980810] pci 0000:00:04.2: [8086:0e22] type 00 class 0x088000 [ 1.988689] pci 0000:00:04.2: reg 0x10: [mem 0xfbb14000-0xfbb17fff 64bit] [ 1.992808] pci 0000:00:04.3: [8086:0e23] type 00 class 0x088000 [ 2.000689] pci 0000:00:04.3: reg 0x10: [mem 0xfbb10000-0xfbb13fff 64bit] [ 2.004809] pci 0000:00:04.4: [8086:0e24] type 00 class 0x088000 [ 2.012689] pci 0000:00:04.4: reg 0x10: [mem 0xfbb0c000-0xfbb0ffff 64bit] [ 2.020807] pci 0000:00:04.5: [8086:0e25] type 00 class 0x088000 [ 2.024689] pci 0000:00:04.5: reg 0x10: [mem 0xfbb08000-0xfbb0bfff 64bit] [ 2.032808] pci 0000:00:04.6: [8086:0e26] type 00 class 0x088000 [ 2.036692] pci 0000:00:04.6: reg 0x10: [mem 0xfbb04000-0xfbb07fff 64bit] [ 2.044808] pci 0000:00:04.7: [8086:0e27] type 00 class 0x088000 [ 2.052689] pci 0000:00:04.7: reg 0x10: [mem 0xfbb00000-0xfbb03fff 64bit] [ 2.056807] pci 0000:00:05.0: [8086:0e28] type 00 class 0x088000 [ 2.064803] pci 0000:00:05.2: [8086:0e2a] type 00 class 0x088000 [ 2.068797] pci 0000:00:05.4: [8086:0e2c] type 00 class 0x080020 [ 2.076685] pci 0000:00:05.4: reg 0x10: [mem 0xfbb25000-0xfbb25fff] [ 2.084824] pci 0000:00:11.0: [8086:1d3e] type 01 class 0x060400 [ 2.088793] pci 0000:00:11.0: PME# supported from D0 D3hot D3cold [ 2.096817] pci 0000:00:16.0: [8086:1d3a] type 00 class 0x078000 [ 2.100693] pci 0000:00:16.0: reg 0x10: [mem 0xfed0e000-0xfed0e00f 64bit] [ 2.108748] pci 0000:00:16.0: PME# supported from D0 D3hot D3cold [ 2.112765] pci 0000:00:16.1: [8086:1d3b] type 00 class 0x078000 [ 2.120693] pci 0000:00:16.1: reg 0x10: [mem 0xfed0f000-0xfed0f00f 64bit] [ 2.128748] pci 0000:00:16.1: PME# supported from D0 D3hot D3cold [ 2.132777] pci 0000:00:1a.0: [8086:1d2d] type 00 class 0x0c0320 [ 2.140689] pci 0000:00:1a.0: reg 0x10: [mem 0xfbb23000-0xfbb233ff] [ 2.144764] pci 0000:00:1a.0: PME# supported from D0 D3hot D3cold [ 2.152779] pci 0000:00:1c.0: [8086:1d10] type 01 class 0x060400 [ 2.156772] pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold [ 2.164703] pci 0000:00:1c.0: Enabling MPC IRBNCE [ 2.168674] pci 0000:00:1c.0: Intel PCH root port ACS workaround enabled [ 2.176790] pci 0000:00:1c.1: [8086:1d12] type 01 class 0x060400 [ 2.180773] pci 0000:00:1c.1: PME# supported from D0 D3hot D3cold [ 2.188699] pci 0000:00:1c.1: Enabling MPC IRBNCE [ 2.192674] pci 0000:00:1c.1: Intel PCH root port ACS workaround enabled [ 2.200789] pci 0000:00:1d.0: [8086:1d26] type 00 class 0x0c0320 [ 2.204690] pci 0000:00:1d.0: reg 0x10: [mem 0xfbb22000-0xfbb223ff] [ 2.212764] pci 0000:00:1d.0: PME# supported from D0 D3hot D3cold [ 2.216776] pci 0000:00:1e.0: [8086:244e] type 01 class 0x060401 [ 2.224824] pci 0000:00:1f.0: [8086:1d41] type 00 class 0x060100 [ 2.228890] pci 0000:00:1f.2: [8086:1d02] type 00 class 0x010601 [ 2.236686] pci 0000:00:1f.2: reg 0x10: [io 0xf050-0xf057] [ 2.240679] pci 0000:00:1f.2: reg 0x14: [io 0xf040-0xf043] [ 2.248679] pci 0000:00:1f.2: reg 0x18: [io 0xf030-0xf037] [ 2.252679] pci 0000:00:1f.2: reg 0x1c: [io 0xf020-0xf023] [ 2.260679] pci 0000:00:1f.2: reg 0x20: [io 0xf000-0xf01f] [ 2.264680] pci 0000:00:1f.2: reg 0x24: [mem 0xfbb21000-0xfbb217ff] [ 2.268717] pci 0000:00:1f.2: PME# supported from D3hot [ 2.276764] pci 0000:00:1f.3: [8086:1d22] type 00 class 0x0c0500 [ 2.280690] pci 0000:00:1f.3: reg 0x10: [mem 0xfbb20000-0xfbb200ff 64bit] [ 2.288696] pci 0000:00:1f.3: reg 0x20: [io 0x1180-0x119f] [ 2.292749] pci 0000:00:1f.6: [8086:1d24] type 00 class 0x118000 [ 2.300693] pci 0000:00:1f.6: reg 0x10: [mem 0xfed08000-0xfed08fff 64bit] [ 2.308836] pci 0000:00:01.0: PCI bridge to [bus 01] [ 2.312724] pci 0000:00:01.1: PCI bridge to [bus 02] [ 2.316723] pci 0000:00:03.0: PCI bridge to [bus 03] [ 2.320756] pci 0000:04:00.0: [8086:1d6b] type 00 class 0x010700 [ 2.328696] pci 0000:04:00.0: reg 0x10: [mem 0xfa47c000-0xfa47ffff 64bit pref] [ 2.336687] pci 0000:04:00.0: reg 0x18: [mem 0xfa000000-0xfa3fffff 64bit pref] [ 2.344682] pci 0000:04:00.0: reg 0x20: [io 0xe000-0xe0ff] [ 2.348699] pci 0000:04:00.0: enabling Extended Tags [ 2.352779] pci 0000:04:00.0: reg 0x164: [mem 0xfa400000-0xfa403fff 64bit pref] [ 2.360673] pci 0000:04:00.0: VF(n) BAR0 space: [mem 0xfa400000-0xfa47bfff 64bit pref] (contains BAR0 for 31 VFs) [ 2.372929] pci 0000:00:11.0: PCI bridge to [bus 04] [ 2.376676] pci 0000:00:11.0: bridge window [io 0xe000-0xefff] [ 2.380681] pci 0000:00:11.0: bridge window [mem 0xfa000000-0xfa4fffff 64bit pref] [ 2.388771] pci 0000:05:00.0: [8086:10d3] type 00 class 0x020000 [ 2.396708] pci 0000:05:00.0: reg 0x10: [mem 0xfba00000-0xfba1ffff] [ 2.404710] pci 0000:05:00.0: reg 0x18: [io 0xd000-0xd01f] [ 2.408691] pci 0000:05:00.0: reg 0x1c: [mem 0xfba20000-0xfba23fff] [ 2.412861] pci 0000:05:00.0: PME# supported from D0 D3hot D3cold [ 2.420894] pci 0000:00:1c.0: PCI bridge to [bus 05] [ 2.424676] pci 0000:00:1c.0: bridge window [io 0xd000-0xdfff] [ 2.432675] pci 0000:00:1c.0: bridge window [mem 0xfba00000-0xfbafffff] [ 2.440775] pci 0000:06:00.0: [8086:10d3] type 00 class 0x020000 [ 2.444708] pci 0000:06:00.0: reg 0x10: [mem 0xfb900000-0xfb91ffff] [ 2.452710] pci 0000:06:00.0: reg 0x18: [io 0xc000-0xc01f] [ 2.456691] pci 0000:06:00.0: reg 0x1c: [mem 0xfb920000-0xfb923fff] [ 2.464859] pci 0000:06:00.0: PME# supported from D0 D3hot D3cold [ 2.468888] pci 0000:00:1c.1: PCI bridge to [bus 06] [ 2.472676] pci 0000:00:1c.1: bridge window [io 0xc000-0xcfff] [ 2.480675] pci 0000:00:1c.1: bridge window [mem 0xfb900000-0xfb9fffff] [ 2.488695] pci_bus 0000:07: extended config space not accessible [ 2.492699] pci 0000:07:01.0: [102b:0532] type 00 class 0x030000 [ 2.500689] pci 0000:07:01.0: reg 0x10: [mem 0xf9000000-0xf9ffffff pref] [ 2.504681] pci 0000:07:01.0: reg 0x14: [mem 0xfb800000-0xfb803fff] [ 2.512682] pci 0000:07:01.0: reg 0x18: [mem 0xfb000000-0xfb7fffff] [ 2.520720] pci 0000:07:01.0: Video device with shadowed ROM at [mem 0x000c0000-0x000dffff] [ 2.528784] pci 0000:00:1e.0: PCI bridge to [bus 07] (subtractive decode) [ 2.532677] pci 0000:00:1e.0: bridge window [mem 0xfb000000-0xfb8fffff] [ 2.540680] pci 0000:00:1e.0: bridge window [mem 0xf9000000-0xf9ffffff 64bit pref] [ 2.548673] pci 0000:00:1e.0: bridge window [io 0x0000-0x03af window] (subtractive decode) [ 2.556673] pci 0000:00:1e.0: bridge window [io 0x03e0-0x0cf7 window] (subtractive decode) [ 2.564673] pci 0000:00:1e.0: bridge window [io 0x03b0-0x03df window] (subtractive decode) [ 2.572673] pci 0000:00:1e.0: bridge window [io 0x0d00-0xffff window] (subtractive decode) [ 2.584673] pci 0000:00:1e.0: bridge window [mem 0x000a0000-0x000dffff window] (subtractive decode) [ 2.592673] pci 0000:00:1e.0: bridge window [mem 0xfed08000-0xfed08fff window] (subtractive decode) [ 2.600673] pci 0000:00:1e.0: bridge window [mem 0xfed0e000-0xfed0ffff window] (subtractive decode) [ 2.608673] pci 0000:00:1e.0: bridge window [mem 0x80000000-0xfbffffff window] (subtractive decode) [ 2.621475] ACPI: PCI Root Bridge [UNC0] (domain 0000 [bus ff]) [ 2.624677] acpi PNP0A03:00: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI HPX-Type3] [ 2.636693] acpi PNP0A03:00: _OSC: OS now controls [PCIeHotplug SHPCHotplug PME AER PCIeCapability LTR] [ 2.644673] acpi PNP0A03:00: FADT indicates ASPM is unsupported, using BIOS configuration [ 2.652741] PCI host bridge to bus 0000:ff [ 2.656674] pci_bus 0000:ff: root bus resource [bus ff] [ 2.660687] pci 0000:ff:08.0: [8086:0e80] type 00 class 0x088000 [ 2.668753] pci 0000:ff:09.0: [8086:0e90] type 00 class 0x088000 [ 2.672743] pci 0000:ff:0a.0: [8086:0ec0] type 00 class 0x088000 [ 2.680733] pci 0000:ff:0a.1: [8086:0ec1] type 00 class 0x088000 [ 2.684732] pci 0000:ff:0a.2: [8086:0ec2] type 00 class 0x088000 [ 2.692736] pci 0000:ff:0a.3: [8086:0ec3] type 00 class 0x088000 [ 2.700740] pci 0000:ff:0b.0: [8086:0e1e] type 00 class 0x088000 [ 2.704730] pci 0000:ff:0b.3: [8086:0e1f] type 00 class 0x088000 [ 2.712731] pci 0000:ff:0c.0: [8086:0ee0] type 00 class 0x088000 [ 2.716731] pci 0000:ff:0c.1: [8086:0ee2] type 00 class 0x088000 [ 2.724733] pci 0000:ff:0d.0: [8086:0ee1] type 00 class 0x088000 [ 2.728730] pci 0000:ff:0d.1: [8086:0ee3] type 00 class 0x088000 [ 2.736734] pci 0000:ff:0e.0: [8086:0ea0] type 00 class 0x088000 [ 2.740736] pci 0000:ff:0e.1: [8086:0e30] type 00 class 0x110100 [ 2.748749] pci 0000:ff:0f.0: [8086:0ea8] type 00 class 0x088000 [ 2.752761] pci 0000:ff:0f.1: [8086:0e71] type 00 class 0x088000 [ 2.760756] pci 0000:ff:0f.2: [8086:0eaa] type 00 class 0x088000 [ 2.764755] pci 0000:ff:0f.3: [8086:0eab] type 00 class 0x088000 [ 2.772755] pci 0000:ff:0f.4: [8086:0eac] type 00 class 0x088000 [ 2.776755] pci 0000:ff:0f.5: [8086:0ead] type 00 class 0x088000 [ 2.784758] pci 0000:ff:10.0: [8086:0eb0] type 00 class 0x088000 [ 2.788756] pci 0000:ff:10.1: [8086:0eb1] type 00 class 0x088000 [ 2.796764] pci 0000:ff:10.2: [8086:0eb2] type 00 class 0x088000 [ 2.800757] pci 0000:ff:10.3: [8086:0eb3] type 00 class 0x088000 [ 2.808755] pci 0000:ff:10.4: [8086:0eb4] type 00 class 0x088000 [ 2.812755] pci 0000:ff:10.5: [8086:0eb5] type 00 class 0x088000 [ 2.820761] pci 0000:ff:10.6: [8086:0eb6] type 00 class 0x088000 [ 2.824755] pci 0000:ff:10.7: [8086:0eb7] type 00 class 0x088000 [ 2.832754] pci 0000:ff:13.0: [8086:0e1d] type 00 class 0x088000 [ 2.836733] pci 0000:ff:13.1: [8086:0e34] type 00 class 0x110100 [ 2.844738] pci 0000:ff:13.4: [8086:0e81] type 00 class 0x088000 [ 2.848733] pci 0000:ff:13.5: [8086:0e36] type 00 class 0x110100 [ 2.856736] pci 0000:ff:16.0: [8086:0ec8] type 00 class 0x088000 [ 2.864732] pci 0000:ff:16.1: [8086:0ec9] type 00 class 0x088000 [ 2.868731] pci 0000:ff:16.2: [8086:0eca] type 00 class 0x088000 [ 2.876893] ACPI: PCI: Interrupt link LNKA configured for IRQ 11 [ 2.880727] ACPI: PCI: Interrupt link LNKB configured for IRQ 10 [ 2.888725] ACPI: PCI: Interrupt link LNKC configured for IRQ 5 [ 2.892724] ACPI: PCI: Interrupt link LNKD configured for IRQ 11 [ 2.900725] ACPI: PCI: Interrupt link LNKE configured for IRQ 0 [ 2.904724] ACPI: PCI: Interrupt link LNKF configured for IRQ 0 [ 2.912743] ACPI: PCI: Interrupt link LNKG configured for IRQ 0 [ 2.916724] ACPI: PCI: Interrupt link LNKH configured for IRQ 7 [ 2.926308] iommu: Default domain type: Translated [ 2.928673] iommu: DMA domain TLB invalidation policy: lazy mode [ 2.936764] pps_core: LinuxPPS API ver. 1 registered [ 2.940673] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti [ 2.948676] PTP clock support registered [ 2.952612] EDAC MC: Ver: 3.0.0 [ 2.956937] NetLabel: Initializing [ 2.960338] NetLabel: domain hash size = 128 [ 2.964675] NetLabel: protocols = UNLABELED CIPSOv4 CALIPSO [ 2.972696] NetLabel: unlabeled traffic allowed by default [ 2.976673] PCI: Using ACPI for IRQ routing [ 2.987673] PCI: pci_cache_line_size set to 64 bytes [ 2.987799] e820: reserve RAM buffer [mem 0x0009ac00-0x0009ffff] [ 2.987802] e820: reserve RAM buffer [mem 0x7de2c000-0x7fffffff] [ 2.988715] pci 0000:07:01.0: vgaarb: setting as boot VGA device [ 2.992671] pci 0000:07:01.0: vgaarb: bridge control possible [ 2.992671] pci 0000:07:01.0: vgaarb: VGA device added: decodes=io+mem,owns=io+mem,locks=none [ 3.008680] vgaarb: loaded [ 3.013214] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0, 0, 0, 0, 0, 0 [ 3.020673] hpet0: 8 comparators, 64-bit 14.318180 MHz counter [ 3.028673] clocksource: Switched to clocksource tsc-early [ 3.034354] VFS: Disk quotas dquot_6.6.0 [ 3.038306] VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes) [ 3.045368] AppArmor: AppArmor Filesystem Enabled [ 3.050101] pnp: PnP ACPI init [ 3.053307] system 00:00: [mem 0xfc000000-0xfcffffff] has been reserved [ 3.059930] system 00:00: [mem 0xfd000000-0xfdffffff] has been reserved [ 3.066548] system 00:00: [mem 0xfe000000-0xfeafffff] has been reserved [ 3.073158] system 00:00: [mem 0xfeb00000-0xfebfffff] has been reserved [ 3.079904] system 00:01: [mem 0xfbffc000-0xfbffdfff] could not be reserved [ 3.087007] system 00:03: [io 0x04d0-0x04d1] has been reserved [ 3.092931] system 00:03: [mem 0x00000400-0x000004ff] could not be reserved [ 3.100216] system 00:06: [io 0x0b00-0x0b7f] has been reserved [ 3.106340] pnp 00:07: [dma 0 disabled] [ 3.106582] pnp 00:08: [dma 0 disabled] [ 3.106862] system 00:09: [io 0x0400-0x0453] has been reserved [ 3.112786] system 00:09: [io 0x0458-0x047f] has been reserved [ 3.118703] system 00:09: [io 0x1180-0x119f] has been reserved [ 3.124621] system 00:09: [io 0x0500-0x057f] has been reserved [ 3.130544] system 00:09: [mem 0xfed1c000-0xfed1ffff] has been reserved [ 3.137153] system 00:09: [mem 0xfec00000-0xfecfffff] could not be reserved [ 3.144115] system 00:09: [mem 0xff000000-0xffffffff] has been reserved [ 3.150837] system 00:0a: [io 0x0454-0x0457] has been reserved [ 3.157041] system 00:0b: [mem 0x00000000-0x0009ffff] could not be reserved [ 3.164289] pnp: PnP ACPI: found 12 devices [ 3.175017] clocksource: acpi_pm: mask: 0xffffff max_cycles: 0xffffff, max_idle_ns: 2085701024 ns [ 3.183991] NET: Registered PF_INET protocol family [ 3.189052] IP idents hash table entries: 131072 (order: 8, 1048576 bytes, linear) [ 3.199382] tcp_listen_portaddr_hash hash table entries: 4096 (order: 4, 65536 bytes, linear) [ 3.207948] Table-perturb hash table entries: 65536 (order: 6, 262144 bytes, linear) [ 3.215776] TCP established hash table entries: 65536 (order: 7, 524288 bytes, linear) [ 3.224082] TCP bind hash table entries: 65536 (order: 9, 2097152 bytes, linear) [ 3.231872] TCP: Hash tables configured (established 65536 bind 65536) [ 3.238499] MPTCP token hash table entries: 8192 (order: 5, 196608 bytes, linear) [ 3.246053] UDP hash table entries: 4096 (order: 5, 131072 bytes, linear) [ 3.252881] UDP-Lite hash table entries: 4096 (order: 5, 131072 bytes, linear) [ 3.260168] NET: Registered PF_UNIX/PF_LOCAL protocol family [ 3.265838] NET: Registered PF_XDP protocol family [ 3.270653] pci 0000:00:01.0: PCI bridge to [bus 01] [ 3.275632] pci 0000:00:01.1: PCI bridge to [bus 02] [ 3.280606] pci 0000:00:03.0: PCI bridge to [bus 03] [ 3.285581] pci 0000:00:11.0: PCI bridge to [bus 04] [ 3.290548] pci 0000:00:11.0: bridge window [io 0xe000-0xefff] [ 3.296647] pci 0000:00:11.0: bridge window [mem 0xfa000000-0xfa4fffff 64bit pref] [ 3.304398] pci 0000:00:1c.0: PCI bridge to [bus 05] [ 3.309362] pci 0000:00:1c.0: bridge window [io 0xd000-0xdfff] [ 3.315458] pci 0000:00:1c.0: bridge window [mem 0xfba00000-0xfbafffff] [ 3.322249] pci 0000:00:1c.1: PCI bridge to [bus 06] [ 3.327216] pci 0000:00:1c.1: bridge window [io 0xc000-0xcfff] [ 3.333311] pci 0000:00:1c.1: bridge window [mem 0xfb900000-0xfb9fffff] [ 3.340103] pci 0000:00:1e.0: PCI bridge to [bus 07] [ 3.345071] pci 0000:00:1e.0: bridge window [mem 0xfb000000-0xfb8fffff] [ 3.351856] pci 0000:00:1e.0: bridge window [mem 0xf9000000-0xf9ffffff 64bit pref] [ 3.359600] pci_bus 0000:00: resource 4 [io 0x0000-0x03af window] [ 3.365781] pci_bus 0000:00: resource 5 [io 0x03e0-0x0cf7 window] [ 3.371961] pci_bus 0000:00: resource 6 [io 0x03b0-0x03df window] [ 3.378141] pci_bus 0000:00: resource 7 [io 0x0d00-0xffff window] [ 3.384319] pci_bus 0000:00: resource 8 [mem 0x000a0000-0x000dffff window] [ 3.391193] pci_bus 0000:00: resource 9 [mem 0xfed08000-0xfed08fff window] [ 3.398065] pci_bus 0000:00: resource 10 [mem 0xfed0e000-0xfed0ffff window] [ 3.405025] pci_bus 0000:00: resource 11 [mem 0x80000000-0xfbffffff window] [ 3.411985] pci_bus 0000:04: resource 0 [io 0xe000-0xefff] [ 3.417556] pci_bus 0000:04: resource 2 [mem 0xfa000000-0xfa4fffff 64bit pref] [ 3.424776] pci_bus 0000:05: resource 0 [io 0xd000-0xdfff] [ 3.430350] pci_bus 0000:05: resource 1 [mem 0xfba00000-0xfbafffff] [ 3.436615] pci_bus 0000:06: resource 0 [io 0xc000-0xcfff] [ 3.442187] pci_bus 0000:06: resource 1 [mem 0xfb900000-0xfb9fffff] [ 3.448454] pci_bus 0000:07: resource 1 [mem 0xfb000000-0xfb8fffff] [ 3.454720] pci_bus 0000:07: resource 2 [mem 0xf9000000-0xf9ffffff 64bit pref] [ 3.461941] pci_bus 0000:07: resource 4 [io 0x0000-0x03af window] [ 3.468119] pci_bus 0000:07: resource 5 [io 0x03e0-0x0cf7 window] [ 3.474299] pci_bus 0000:07: resource 6 [io 0x03b0-0x03df window] [ 3.480476] pci_bus 0000:07: resource 7 [io 0x0d00-0xffff window] [ 3.486658] pci_bus 0000:07: resource 8 [mem 0x000a0000-0x000dffff window] [ 3.493529] pci_bus 0000:07: resource 9 [mem 0xfed08000-0xfed08fff window] [ 3.500402] pci_bus 0000:07: resource 10 [mem 0xfed0e000-0xfed0ffff window] [ 3.507361] pci_bus 0000:07: resource 11 [mem 0x80000000-0xfbffffff window] [ 3.514417] pci 0000:00:05.0: disabled boot interrupts on device [8086:0e28] [ 3.545500] pci 0000:00:1a.0: quirk_usb_early_handoff+0x0/0x750 took 23452 usecs [ 3.577484] pci 0000:00:1d.0: quirk_usb_early_handoff+0x0/0x750 took 23994 usecs [ 3.584986] PCI: CLS 64 bytes, default 64 [ 3.589031] DMAR: No SATC found [ 3.589072] Trying to unpack rootfs image as initramfs... [ 3.592177] DMAR: dmar0: Using Queued invalidation [ 3.592256] pci 0000:00:00.0: Adding to iommu group 0 [ 3.607493] pci 0000:00:01.0: Adding to iommu group 1 [ 3.612576] pci 0000:00:01.1: Adding to iommu group 2 [ 3.617661] pci 0000:00:03.0: Adding to iommu group 3 [ 3.622744] pci 0000:00:04.0: Adding to iommu group 4 [ 3.627822] pci 0000:00:04.1: Adding to iommu group 5 [ 3.632903] pci 0000:00:04.2: Adding to iommu group 6 [ 3.637983] pci 0000:00:04.3: Adding to iommu group 7 [ 3.643066] pci 0000:00:04.4: Adding to iommu group 8 [ 3.648145] pci 0000:00:04.5: Adding to iommu group 9 [ 3.653228] pci 0000:00:04.6: Adding to iommu group 10 [ 3.658397] pci 0000:00:04.7: Adding to iommu group 11 [ 3.663564] pci 0000:00:05.0: Adding to iommu group 12 [ 3.668731] pci 0000:00:05.2: Adding to iommu group 13 [ 3.673898] pci 0000:00:05.4: Adding to iommu group 14 [ 3.679068] pci 0000:00:11.0: Adding to iommu group 15 [ 3.684256] pci 0000:00:16.0: Adding to iommu group 16 [ 3.689425] pci 0000:00:16.1: Adding to iommu group 16 [ 3.694600] pci 0000:00:1a.0: Adding to iommu group 17 [ 3.699771] pci 0000:00:1c.0: Adding to iommu group 18 [ 3.704940] pci 0000:00:1c.1: Adding to iommu group 19 [ 3.710104] pci 0000:00:1d.0: Adding to iommu group 20 [ 3.715274] pci 0000:00:1e.0: Adding to iommu group 21 [ 3.720487] pci 0000:00:1f.0: Adding to iommu group 22 [ 3.725652] pci 0000:00:1f.2: Adding to iommu group 22 [ 3.730817] pci 0000:00:1f.3: Adding to iommu group 22 [ 3.735984] pci 0000:00:1f.6: Adding to iommu group 22 [ 3.741157] pci 0000:04:00.0: Adding to iommu group 23 [ 3.746325] pci 0000:05:00.0: Adding to iommu group 24 [ 3.751488] pci 0000:06:00.0: Adding to iommu group 25 [ 3.756634] pci 0000:07:01.0: Adding to iommu group 21 [ 3.761821] pci 0000:ff:08.0: Adding to iommu group 26 [ 3.767004] pci 0000:ff:09.0: Adding to iommu group 27 [ 3.772210] pci 0000:ff:0a.0: Adding to iommu group 28 [ 3.777376] pci 0000:ff:0a.1: Adding to iommu group 28 [ 3.782542] pci 0000:ff:0a.2: Adding to iommu group 28 [ 3.787711] pci 0000:ff:0a.3: Adding to iommu group 28 [ 3.792905] pci 0000:ff:0b.0: Adding to iommu group 29 [ 3.798077] pci 0000:ff:0b.3: Adding to iommu group 29 [ 3.803269] pci 0000:ff:0c.0: Adding to iommu group 30 [ 3.808441] pci 0000:ff:0c.1: Adding to iommu group 30 [ 3.813639] pci 0000:ff:0d.0: Adding to iommu group 31 [ 3.818806] pci 0000:ff:0d.1: Adding to iommu group 31 [ 3.824000] pci 0000:ff:0e.0: Adding to iommu group 32 [ 3.829174] pci 0000:ff:0e.1: Adding to iommu group 32 [ 3.834346] pci 0000:ff:0f.0: Adding to iommu group 33 [ 3.839513] pci 0000:ff:0f.1: Adding to iommu group 34 [ 3.844679] pci 0000:ff:0f.2: Adding to iommu group 35 [ 3.849850] pci 0000:ff:0f.3: Adding to iommu group 36 [ 3.855020] pci 0000:ff:0f.4: Adding to iommu group 37 [ 3.860186] pci 0000:ff:0f.5: Adding to iommu group 38 [ 3.865354] pci 0000:ff:10.0: Adding to iommu group 39 [ 3.870518] pci 0000:ff:10.1: Adding to iommu group 40 [ 3.875682] pci 0000:ff:10.2: Adding to iommu group 41 [ 3.880846] pci 0000:ff:10.3: Adding to iommu group 42 [ 3.886012] pci 0000:ff:10.4: Adding to iommu group 43 [ 3.891179] pci 0000:ff:10.5: Adding to iommu group 44 [ 3.896343] pci 0000:ff:10.6: Adding to iommu group 45 [ 3.901523] pci 0000:ff:10.7: Adding to iommu group 46 [ 3.906739] pci 0000:ff:13.0: Adding to iommu group 47 [ 3.911919] pci 0000:ff:13.1: Adding to iommu group 47 [ 3.917087] pci 0000:ff:13.4: Adding to iommu group 47 [ 3.922266] pci 0000:ff:13.5: Adding to iommu group 47 [ 3.927467] pci 0000:ff:16.0: Adding to iommu group 48 [ 3.932638] pci 0000:ff:16.1: Adding to iommu group 48 [ 3.937812] pci 0000:ff:16.2: Adding to iommu group 48 [ 3.946843] DMAR: Intel(R) Virtualization Technology for Directed I/O [ 3.953297] PCI-DMA: Using software bounce buffering for IO (SWIOTLB) [ 3.959740] software IO TLB: mapped [mem 0x0000000079e2c000-0x000000007de2c000] (64MB) [ 3.968218] Initialise system trusted keyrings [ 3.972680] Key type blacklist registered [ 3.976773] workingset: timestamp_bits=36 max_order=21 bucket_order=0 [ 3.985071] zbud: loaded [ 3.987931] integrity: Platform Keyring initialized [ 3.992824] integrity: Machine keyring initialized [ 3.997615] Key type asymmetric registered [ 4.001714] Asymmetric key parser 'x509' registered [ 4.033208] Freeing initrd memory: 39592K [ 4.044408] alg: self-tests for CTR-KDF (hmac(sha256)) passed [ 4.050191] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 248) [ 4.057632] io scheduler mq-deadline registered [ 4.064598] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4 [ 4.071414] Monitor-Mwait will be used to enter C-1 state [ 4.071428] Monitor-Mwait will be used to enter C-2 state [ 4.071435] ACPI: \_SB_.SCK0.C000: Found 2 idle states [ 4.081482] ERST: Error Record Serialization Table (ERST) support is initialized. [ 4.088973] pstore: Registered erst as persistent store backend [ 4.095028] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled [ 4.101470] 00:07: ttyS0 at I/O 0x3f8 (irq = 4, base_baud = 115200) is a 16550A [ 4.109565] 00:08: ttyS1 at I/O 0x2f8 (irq = 3, base_baud = 115200) is a 16550A [ 4.117802] Linux agpgart interface v0.103 [ 4.122031] AMD-Vi: AMD IOMMUv2 functionality not available on this system - This is not a bug. [ 4.131174] i8042: PNP: PS/2 Controller [PNP0f03:PS2M] at 0x60,0x64 irq 12 [ 4.138052] i8042: PNP: PS/2 controller doesn't have KBD irq; using default 1 [ 4.147861] serio: i8042 KBD port at 0x60,0x64 irq 1 [ 4.152830] serio: i8042 AUX port at 0x60,0x64 irq 12 [ 4.158080] mousedev: PS/2 mouse device common for all mice [ 4.163692] rtc_cmos 00:02: RTC can wake from S4 [ 4.168615] rtc_cmos 00:02: registered as rtc0 [ 4.173099] rtc_cmos 00:02: setting system clock to 2024-06-23T17:08:57 UTC (1719162537) [ 4.181224] rtc_cmos 00:02: alarms up to one month, y3k, 114 bytes nvram, hpet irqs [ 4.189048] intel_pstate: Intel P-state driver initializing [ 4.194890] ledtrig-cpu: registered to indicate activity on CPUs [ 4.218627] NET: Registered PF_INET6 protocol family [ 4.232494] Segment Routing with IPv6 [ 4.236184] In-situ OAM (IOAM) with IPv6 [ 4.240150] mip6: Mobile IPv6 [ 4.243130] NET: Registered PF_PACKET protocol family [ 4.248274] mpls_gso: MPLS GSO support [ 4.252517] microcode: sig=0x306e4, pf=0x8, revision=0x42e [ 4.258064] microcode: Microcode Update Driver: v2.2. [ 4.258072] IPI shorthand broadcast: enabled [ 4.267432] sched_clock: Marking stable (3278016426, 989381283)->(4637716002, -370318293) [ 4.275873] registered taskstats version 1 [ 4.279991] Loading compiled-in X.509 certificates [ 4.324859] Loaded X.509 cert 'Debian Secure Boot CA: 6ccece7e4c6c0d1f6149f3dd27dfcc5cbb419ea1' [ 4.333589] Loaded X.509 cert 'Debian Secure Boot Signer 2022 - linux: 14011249c2675ea8e5148542202005810584b25f' [ 4.344224] zswap: loaded using pool lzo/zbud [ 4.348800] Key type .fscrypt registered [ 4.352726] Key type fscrypt-provisioning registered [ 4.358011] pstore: Using crash dump compression: deflate [ 4.370639] Key type encrypted registered [ 4.374678] AppArmor: AppArmor sha1 policy hashing enabled [ 4.380174] ima: No TPM chip found, activating TPM-bypass! [ 4.385658] ima: Allocated hash algorithm: sha256 [ 4.390376] ima: No architecture policies found [ 4.394915] evm: Initialising EVM extended attributes: [ 4.400052] evm: security.selinux [ 4.403369] evm: security.SMACK64 (disabled) [ 4.407644] evm: security.SMACK64EXEC (disabled) [ 4.412261] evm: security.SMACK64TRANSMUTE (disabled) [ 4.417315] evm: security.SMACK64MMAP (disabled) [ 4.421934] evm: security.apparmor [ 4.425337] evm: security.ima [ 4.428303] evm: security.capability [ 4.431885] evm: HMAC attrs: 0x1 [ 4.610715] clk: Disabling unused clocks [ 4.616282] Freeing unused decrypted memory: 2036K [ 4.621761] Freeing unused kernel image (initmem) memory: 2796K [ 4.627780] Write protecting the kernel read-only data: 26624k [ 4.634308] Freeing unused kernel image (text/rodata gap) memory: 2040K [ 4.641255] Freeing unused kernel image (rodata/data gap) memory: 1180K [ 4.733995] x86/mm: Checked W+X mappings: passed, no W+X pages found. [ 4.740438] x86/mm: Checking user space page tables [ 4.820140] x86/mm: Checked W+X mappings: passed, no W+X pages found. [ 4.826582] Run /init as init process [ 4.830251] with arguments: [ 4.830253] /init [ 4.830254] with environment: [ 4.830255] HOME=/ [ 4.830257] TERM=linux [ 4.830258] BOOT_IMAGE=/vmlinuz-6.1.0-21-amd64 [ 4.993407] tsc: Refined TSC clocksource calibration: 1799.999 MHz [ 4.999596] clocksource: tsc: mask: 0xffffffffffffffff max_cycles: 0x19f228ab7a2, max_idle_ns: 440795289252 ns [ 5.009800] clocksource: Switched to clocksource tsc [ 5.042381] i801_smbus 0000:00:1f.3: SMBus using PCI interrupt [ 5.048771] i2c i2c-0: 1/6 memory slots populated (from DMI) [ 5.054443] i2c i2c-0: Systems with more than 4 memory slots not supported yet, not instantiating SPD [ 5.064081] SCSI subsystem initialized [ 5.071038] ACPI: bus type USB registered [ 5.075089] usbcore: registered new interface driver usbfs [ 5.080587] usbcore: registered new interface driver hub [ 5.085924] usbcore: registered new device driver usb [ 5.096890] e1000e: Intel(R) PRO/1000 Network Driver [ 5.101862] e1000e: Copyright(c) 1999 - 2015 Intel Corporation. [ 5.108143] e1000e 0000:05:00.0: Interrupt Throttling Rate (ints/sec) set to dynamic conservative mode [ 5.118324] libata version 3.00 loaded. [ 5.126133] ahci 0000:00:1f.2: version 3.0 [ 5.127092] ehci-pci 0000:00:1a.0: EHCI Host Controller [ 5.132483] ehci-pci 0000:00:1a.0: new USB bus registered, assigned bus number 1 [ 5.136445] ahci 0000:00:1f.2: AHCI 0001.0300 32 slots 6 ports 6 Gbps 0x3f impl SATA mode [ 5.145654] ehci-pci 0000:00:1a.0: debug port 2 [ 5.148061] ahci 0000:00:1f.2: flags: 64bit ncq sntf pm led clo pio slum part ems apst [ 5.164515] isci: Intel(R) C600 SAS Controller Driver - version 1.2.0 [ 5.164679] ehci-pci 0000:00:1a.0: irq 16, io mem 0xfbb23000 [ 5.170980] isci 0000:04:00.0: driver configured for rev: 6 silicon [ 5.176417] e1000e 0000:05:00.0 0000:05:00.0 (uninitialized): registered PHC clock [ 5.193455] ehci-pci 0000:00:1a.0: USB 2.0 started, EHCI 1.00 [ 5.199623] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 6.01 [ 5.208382] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 5.208614] isci 0000:04:00.0: OEM parameter table found in OROM [ 5.215611] usb usb1: Product: EHCI Host Controller [ 5.221615] isci 0000:04:00.0: OEM SAS parameters (version: 1.0) loaded (platform) [ 5.226490] usb usb1: Manufacturer: Linux 6.1.0-21-amd64 ehci_hcd [ 5.229702] e1000e 0000:05:00.0 eth0: (PCI Express:2.5GT/s:Width x1) 00:25:90:eb:25:a6 [ 5.229707] e1000e 0000:05:00.0 eth0: Intel(R) PRO/1000 Network Connection [ 5.229794] e1000e 0000:05:00.0 eth0: MAC: 3, PHY: 8, PBA No: FFFFFF-0FF [ 5.230058] e1000e 0000:06:00.0: Interrupt Throttling Rate (ints/sec) set to dynamic conservative mode [ 5.231374] scsi host0: ahci [ 5.231566] scsi host1: ahci [ 5.231706] scsi host2: ahci [ 5.232031] scsi host3: ahci [ 5.232331] scsi host4: ahci [ 5.232630] scsi host5: ahci [ 5.232691] ata1: SATA max UDMA/133 abar m2048@0xfbb21000 port 0xfbb21100 irq 32 [ 5.232696] ata2: SATA max UDMA/133 abar m2048@0xfbb21000 port 0xfbb21180 irq 32 [ 5.232699] ata3: SATA max UDMA/133 abar m2048@0xfbb21000 port 0xfbb21200 irq 32 [ 5.232701] ata4: SATA max UDMA/133 abar m2048@0xfbb21000 port 0xfbb21280 irq 32 [ 5.232704] ata5: SATA max UDMA/133 abar m2048@0xfbb21000 port 0xfbb21300 irq 32 [ 5.232706] ata6: SATA max UDMA/133 abar m2048@0xfbb21000 port 0xfbb21380 irq 32 [ 5.240325] isci 0000:04:00.0: SCU controller 0: phy 3-0 cables: {short, short, short, short} [ 5.248061] usb usb1: SerialNumber: 0000:00:1a.0 [ 5.248288] hub 1-0:1.0: USB hub found [ 5.257720] scsi host6: isci [ 5.261678] hub 1-0:1.0: 2 ports detected [ 5.287586] e1000e 0000:06:00.0 0000:06:00.0 (uninitialized): registered PHC clock [ 5.288633] ehci-pci 0000:00:1d.0: EHCI Host Controller [ 5.346775] e1000e 0000:06:00.0 eth1: (PCI Express:2.5GT/s:Width x1) 00:25:90:eb:25:a7 [ 5.349552] ehci-pci 0000:00:1d.0: new USB bus registered, assigned bus number 2 [ 5.352415] e1000e 0000:06:00.0 eth1: Intel(R) PRO/1000 Network Connection [ 5.356454] ehci-pci 0000:00:1d.0: debug port 2 [ 5.364077] e1000e 0000:06:00.0 eth1: MAC: 3, PHY: 8, PBA No: FFFFFF-0FF [ 5.373165] ehci-pci 0000:00:1d.0: irq 23, io mem 0xfbb22000 [ 5.421453] ehci-pci 0000:00:1d.0: USB 2.0 started, EHCI 1.00 [ 5.427270] usb usb2: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 6.01 [ 5.435532] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 5.442748] usb usb2: Product: EHCI Host Controller [ 5.447627] usb usb2: Manufacturer: Linux 6.1.0-21-amd64 ehci_hcd [ 5.453719] usb usb2: SerialNumber: 0000:00:1d.0 [ 5.458542] hub 2-0:1.0: USB hub found [ 5.462303] hub 2-0:1.0: 2 ports detected [ 5.544208] ata1: SATA link up 6.0 Gbps (SStatus 133 SControl 300) [ 5.550438] ata2: SATA link down (SStatus 0 SControl 300) [ 5.555875] ata3: SATA link down (SStatus 0 SControl 300) [ 5.561300] ata6: SATA link down (SStatus 0 SControl 300) [ 5.566715] ata5: SATA link down (SStatus 0 SControl 300) [ 5.572131] ata4: SATA link down (SStatus 0 SControl 300) [ 5.577620] ata1.00: ATA-8: WDC WD1003FBYZ-010FB0, 01.01V03, max UDMA/133 [ 5.584434] usb 1-1: new high-speed USB device number 2 using ehci-pci [ 5.591242] ata1.00: 1953525168 sectors, multi 16: LBA48 NCQ (depth 32), AA [ 5.599221] ata1.00: configured for UDMA/133 [ 5.603563] scsi: waiting for bus probes to complete ... [ 5.697614] scsi 0:0:0:0: Direct-Access ATA WDC WD1003FBYZ-0 1V03 PQ: 0 ANSI: 5 [ 5.707940] e1000e 0000:05:00.0 enx002590eb25a6: renamed from eth0 [ 5.725428] usb 2-1: new high-speed USB device number 2 using ehci-pci [ 5.737853] e1000e 0000:06:00.0 enx002590eb25a7: renamed from eth1 [ 5.738417] sd 0:0:0:0: [sda] 1953525168 512-byte logical blocks: (1.00 TB/932 GiB) [ 5.751768] sd 0:0:0:0: [sda] Write Protect is off [ 5.756599] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00 [ 5.756622] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 5.765696] usb 1-1: New USB device found, idVendor=8087, idProduct=0024, bcdDevice= 0.00 [ 5.765705] sd 0:0:0:0: [sda] Preferred minimum I/O size 512 bytes [ 5.773879] usb 1-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0 [ 5.787413] hub 1-1:1.0: USB hub found [ 5.791292] hub 1-1:1.0: 6 ports detected [ 5.812576] sda: sda1 sda2 < sda5 > [ 5.816439] sd 0:0:0:0: [sda] Attached SCSI disk [ 5.885796] usb 2-1: New USB device found, idVendor=8087, idProduct=0024, bcdDevice= 0.00 [ 5.893988] usb 2-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0 [ 5.901784] hub 2-1:1.0: USB hub found [ 5.905700] hub 2-1:1.0: 8 ports detected [ 6.081466] usb 1-1.1: new full-speed USB device number 3 using ehci-pci [ 6.138694] device-mapper: core: CONFIG_IMA_DISABLE_HTABLE is disabled. Duplicate IMA measurements will not be recorded in the IMA log. [ 6.150920] device-mapper: uevent: version 1.0.3 [ 6.155670] device-mapper: ioctl: 4.47.0-ioctl (2022-07-28) initialised: dm-devel@redhat.com [ 6.199541] usb 1-1.1: New USB device found, idVendor=0557, idProduct=2221, bcdDevice= 0.01 [ 6.207918] usb 1-1.1: New USB device strings: Mfr=1, Product=2, SerialNumber=0 [ 6.215223] usb 1-1.1: Product: Hermon USB hidmouse Device [ 6.220708] usb 1-1.1: Manufacturer: Winbond Electronics Corp [ 6.236860] hid: raw HID events driver (C) Jiri Kosina [ 6.247716] usbcore: registered new interface driver usbhid [ 6.253312] usbhid: USB HID core driver [ 6.259628] input: Winbond Electronics Corp Hermon USB hidmouse Device as /devices/pci0000:00/0000:00:1a.0/usb1/1-1/1-1.1/1-1.1:1.0/0003:0557:2221.0001/input/input3 [ 6.274484] hid-generic 0003:0557:2221.0001: input,hidraw0: USB HID v1.00 Mouse [Winbond Electronics Corp Hermon USB hidmouse Device] on usb-0000:00:1a.0-1.1/input0 [ 6.289346] input: Winbond Electronics Corp Hermon USB hidmouse Device as /devices/pci0000:00/0000:00:1a.0/usb1/1-1/1-1.1/1-1.1:1.1/0003:0557:2221.0002/input/input4 [ 6.361653] hid-generic 0003:0557:2221.0002: input,hidraw1: USB HID v1.00 Keyboard [Winbond Electronics Corp Hermon USB hidmouse Device] on usb-0000:00:1a.0-1.1/input1 [ 6.822045] PM: Image not found (code -22) [ 7.196469] EXT4-fs (dm-0): mounting ext3 file system using the ext4 subsystem [ 7.207763] EXT4-fs (dm-0): mounted filesystem with ordered data mode. Quota mode: none. [ 7.373709] Not activating Mandatory Access Control as /sbin/tomoyo-init does not exist. [ 9.107539] input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input5 [ 9.129446] ACPI: button: Power Button [PWRB] [ 9.133973] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input6 [ 9.141432] ACPI: button: Power Button [PWRF] [ 9.217917] input: PC Speaker as /devices/platform/pcspkr/input/input7 [ 9.258155] dca service started, version 1.12.1 [ 9.273436] IPMI message handler: version 39.2 [ 9.333285] sd 0:0:0:0: Attached scsi generic sg0 type 0 [ 9.360682] ioatdma: Intel(R) QuickData Technology Driver 5.00 [ 9.367623] ipmi device interface [ 9.448694] ipmi_si: IPMI System Interface driver [ 9.453576] ipmi_si dmi-ipmi-si.0: ipmi_platform: probing via SMBIOS [ 9.459946] ipmi_platform: ipmi_si: SMBIOS: io 0xca2 regsize 1 spacing 1 irq 0 [ 9.467209] ipmi_si: Adding SMBIOS-specified kcs state machine [ 9.473192] ipmi_si IPI0001:00: ipmi_platform: probing via ACPI [ 9.479296] ipmi_si IPI0001:00: ipmi_platform: [io 0x0ca2] regsize 1 spacing 1 irq 0 [ 9.546038] ipmi_si dmi-ipmi-si.0: Removing SMBIOS-specified kcs state machine in favor of ACPI [ 9.554776] ipmi_si: Adding ACPI-specified kcs state machine [ 9.560541] ipmi_si: Trying ACPI-specified kcs state machine at i/o address 0xca2, slave address 0x0, irq 0 [ 9.625726] RAPL PMU: API unit is 2^-32 Joules, 3 fixed counters, 163840 ms ovfl timer [ 9.633666] RAPL PMU: hw unit of domain pp0-core 2^-16 Joules [ 9.639417] RAPL PMU: hw unit of domain package 2^-16 Joules [ 9.645083] RAPL PMU: hw unit of domain dram 2^-16 Joules [ 9.670623] mei_me 0000:00:16.0: Device doesn't have valid ME Interface [ 9.724416] cryptd: max_cpu_qlen set to 1000 [ 9.728943] ACPI: bus type drm_connector registered [ 9.762617] iTCO_vendor_support: vendor-support=0 [ 9.830329] iTCO_wdt iTCO_wdt.1.auto: unable to reset NO_REBOOT flag, device disabled by hardware/BIOS [ 9.853434] ipmi_si IPI0001:00: The BMC does not support clearing the recv irq bit, compensating, but the BMC needs to be fixed. [ 9.868893] AVX version of gcm_enc/dec engaged. [ 9.873492] AES CTR mode by8 optimization enabled [ 9.925366] mgag200 0000:07:01.0: vgaarb: deactivate vga console [ 9.936445] Console: switching to colour dummy device 80x25 [ 9.948302] [drm] Initialized mgag200 1.0.0 20110418 for 0000:07:01.0 on minor 0 [ 9.951961] ipmi_si IPI0001:00: IPMI message handler: Found new BMC (man_id: 0x002a7c, prod_id: 0x0703, dev_id: 0x20) [ 9.966354] fbcon: mgag200drmfb (fb0) is primary device [ 10.060240] ipmi_si IPI0001:00: IPMI kcs interface initialized [ 10.114853] ipmi_ssif: IPMI SSIF Interface driver [ 10.332198] Console: switching to colour frame buffer device 128x48 [ 10.418777] mgag200 0000:07:01.0: [drm] fb0: mgag200drmfb frame buffer device [ 11.159334] EDAC sbridge: Seeking for: PCI ID 8086:0ea0 [ 11.159362] EDAC sbridge: Seeking for: PCI ID 8086:0ea0 [ 11.159370] EDAC sbridge: Seeking for: PCI ID 8086:0e60 [ 11.159378] EDAC sbridge: Seeking for: PCI ID 8086:0ea8 [ 11.159386] EDAC sbridge: Seeking for: PCI ID 8086:0ea8 [ 11.159390] EDAC sbridge: Seeking for: PCI ID 8086:0e71 [ 11.159398] EDAC sbridge: Seeking for: PCI ID 8086:0e71 [ 11.159402] EDAC sbridge: Seeking for: PCI ID 8086:0eaa [ 11.159410] EDAC sbridge: Seeking for: PCI ID 8086:0eaa [ 11.159414] EDAC sbridge: Seeking for: PCI ID 8086:0eab [ 11.159423] EDAC sbridge: Seeking for: PCI ID 8086:0eab [ 11.159426] EDAC sbridge: Seeking for: PCI ID 8086:0eac [ 11.159435] EDAC sbridge: Seeking for: PCI ID 8086:0eac [ 11.159438] EDAC sbridge: Seeking for: PCI ID 8086:0ead [ 11.159447] EDAC sbridge: Seeking for: PCI ID 8086:0ead [ 11.159450] EDAC sbridge: Seeking for: PCI ID 8086:0e68 [ 11.159457] EDAC sbridge: Seeking for: PCI ID 8086:0e79 [ 11.159465] EDAC sbridge: Seeking for: PCI ID 8086:0e6a [ 11.159473] EDAC sbridge: Seeking for: PCI ID 8086:0e6b [ 11.159480] EDAC sbridge: Seeking for: PCI ID 8086:0e6c [ 11.159488] EDAC sbridge: Seeking for: PCI ID 8086:0e6d [ 11.159496] EDAC sbridge: Seeking for: PCI ID 8086:0eb8 [ 11.159503] EDAC sbridge: Seeking for: PCI ID 8086:0ebc [ 11.159511] EDAC sbridge: Seeking for: PCI ID 8086:0ec8 [ 11.159521] EDAC sbridge: Seeking for: PCI ID 8086:0ec8 [ 11.159523] EDAC sbridge: Seeking for: PCI ID 8086:0ec9 [ 11.159532] EDAC sbridge: Seeking for: PCI ID 8086:0ec9 [ 11.159534] EDAC sbridge: Seeking for: PCI ID 8086:0eca [ 11.159544] EDAC sbridge: Seeking for: PCI ID 8086:0eca [ 11.159685] EDAC MC0: Giving out device to module sb_edac controller Ivy Bridge SrcID#0_Ha#0: DEV 0000:ff:0e.0 (INTERRUPT) [ 11.170763] EDAC sbridge: Ver: 1.1.2 [ 11.243716] intel_rapl_common: Found RAPL domain package [ 11.249063] intel_rapl_common: Found RAPL domain core [ 11.254137] intel_rapl_common: Found RAPL domain dram [ 12.413362] EXT4-fs (dm-0): re-mounted. Quota mode: none. [ 13.388945] EXT4-fs (sda1): mounting ext3 file system using the ext4 subsystem [ 13.420995] EXT4-fs (sda1): mounted filesystem with ordered data mode. Quota mode: none. [ 13.477835] Adding 1949692k swap on /dev/mapper/fiano1--vg-swap_1. Priority:-2 extents:1 across:1949692k FS [ 14.103588] audit: type=1400 audit(1719162547.300:2): apparmor="STATUS" operation="profile_load" profile="unconfined" name="lsb_release" pid=1066 comm="apparmor_parser" [ 14.119163] audit: type=1400 audit(1719162547.300:3): apparmor="STATUS" operation="profile_load" profile="unconfined" name="nvidia_modprobe" pid=1067 comm="apparmor_parser" [ 14.134542] audit: type=1400 audit(1719162547.304:4): apparmor="STATUS" operation="profile_load" profile="unconfined" name="nvidia_modprobe//kmod" pid=1067 comm="apparmor_parser" [ 14.178633] audit: type=1400 audit(1719162547.376:5): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/bin/man" pid=1069 comm="apparmor_parser" [ 14.193797] audit: type=1400 audit(1719162547.376:6): apparmor="STATUS" operation="profile_load" profile="unconfined" name="man_filter" pid=1069 comm="apparmor_parser" [ 14.208748] audit: type=1400 audit(1719162547.380:7): apparmor="STATUS" operation="profile_load" profile="unconfined" name="man_groff" pid=1069 comm="apparmor_parser" [ 14.357914] audit: type=1400 audit(1719162547.556:8): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/sbin/ntpd" pid=1078 comm="apparmor_parser" [ 14.374272] audit: type=1400 audit(1719162547.572:9): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=1068 comm="apparmor_parser" [ 14.392273] audit: type=1400 audit(1719162547.572:10): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/NetworkManager/nm-dhcp-helper" pid=1068 comm="apparmor_parser" [ 14.409725] audit: type=1400 audit(1719162547.576:11): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/connman/scripts/dhclient-script" pid=1068 comm="apparmor_parser" [ 17.454514] e1000e 0000:05:00.0 enx002590eb25a6: NIC Link is Up 1000 Mbps Full Duplex, Flow Control: None [ 17.464437] IPv6: ADDRCONF(NETDEV_CHANGE): enx002590eb25a6: link becomes ready