[ 0.000000] Linux version 6.10.0-rc5 (osstest@himrod1) (gcc (Debian 12.2.0-14) 12.2.0, GNU ld (GNU Binutils for Debian) 2.40) #1 SMP PREEMPT_DYNAMIC Mon Jun 24 02:21:20 UTC 2024 [ 0.000000] Command line: placeholder root=/dev/mapper/pinot0--vg-root ro console=hvc0 [ 0.000000] [Firmware Bug]: TSC doesn't count with P0 frequency! [ 0.000000] BIOS-provided physical RAM map: [ 0.000000] BIOS-e820: [mem 0x0000000000000000-0x0000000000099fff] usable [ 0.000000] BIOS-e820: [mem 0x000000000009a800-0x00000000000fffff] reserved [ 0.000000] BIOS-e820: [mem 0x0000000000100000-0x0000000040065eff] usable [ 0.000000] BIOS-e820: [mem 0x0000000040065f00-0x0000000040065f97] ACPI data [ 0.000000] BIOS-e820: [mem 0x0000000040066000-0x00000000dfe8ffff] usable [ 0.000000] BIOS-e820: [mem 0x00000000dfe9e000-0x00000000dfe9ffff] type 9 [ 0.000000] BIOS-e820: [mem 0x00000000dfea0000-0x00000000dfeb1fff] ACPI data [ 0.000000] BIOS-e820: [mem 0x00000000dfeb2000-0x00000000dfedffff] ACPI NVS [ 0.000000] BIOS-e820: [mem 0x00000000dfee0000-0x00000000efffffff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000ffe00000-0x00000000ffffffff] reserved [ 0.000000] BIOS-e820: [mem 0x0000000100000000-0x000000021effffff] usable [ 0.000000] NX (Execute Disable) protection: active [ 0.000000] APIC: Static calls initialized [ 0.000000] SMBIOS 2.6 present. [ 0.000000] DMI: Supermicro H8SML/H8SML, BIOS 3.5 11/25/2013 [ 0.000000] DMI: Memory slots populated: 2/4 [ 0.000000] Hypervisor detected: Xen HVM [ 0.000000] Xen version 4.19. [ 0.000010] HVMOP_pagetable_dying not supported [ 0.089045] tsc: Fast TSC calibration failed [ 0.089047] tsc: Detected 2800.000 MHz processor [ 0.094695] e820: update [mem 0x00000000-0x00000fff] usable ==> reserved [ 0.094699] e820: remove [mem 0x000a0000-0x000fffff] usable [ 0.094706] last_pfn = 0x21f000 max_arch_pfn = 0x400000000 [ 0.094825] MTRR map: 5 entries (3 fixed + 2 variable; max 20), built from 9 variable MTRRs [ 0.094829] x86/PAT: Configuration [0-7]: WB WC UC- UC WB WP UC- WT [ 0.103659] e820: update [mem 0xe0000000-0xffffffff] usable ==> reserved [ 0.103673] last_pfn = 0xdfe90 max_arch_pfn = 0x400000000 [ 0.109291] found SMP MP-table at [mem 0x000ff780-0x000ff78f] [ 0.109322] Using GB pages for direct mapping [ 0.109882] RAMDISK: [mem 0x03430000-0x047e7fff] [ 0.109893] ACPI: Early table checksum verification disabled [ 0.109899] ACPI: RSDP 0x0000000040065F00 000024 (v02 ACPIAM) [ 0.109904] ACPI: XSDT 0x0000000040065F24 000044 (v01 SMCI 20131125 MSFT 00000097) [ 0.109912] ACPI: APIC 0x0000000040065F68 000098 (v01 112513 APIC1100 20131125 MSFT 00000097) [ 0.109919] ACPI: FACP 0x00000000DFEA0290 0000F4 (v03 112513 FACP1100 20131125 MSFT 00000097) [ 0.109962] ACPI BIOS Warning (bug): 32/64X length mismatch in FADT/Gpe0Block: 64/32 (20240322/tbfadt-560) [ 0.109969] ACPI: DSDT 0x00000000DFEA0600 00562B (v01 1CF11 1CF11000 00000000 INTL 20051117) [ 0.109974] ACPI: FACS 0x00000000DFEB2000 000040 [ 0.109978] ACPI: FACS 0x00000000DFEB2000 000040 [ 0.109983] ACPI: MCFG 0x00000000DFEA0440 00003C (v01 112513 OEMMCFG 20131125 MSFT 00000097) [ 0.109988] ACPI: SSDT 0x00000000DFEAA6F0 000B9C (v01 A M I POWERNOW 00000001 AMD 00000001) [ 0.109992] ACPI: Reserving APIC table memory at [mem 0x40065f68-0x40065fff] [ 0.109994] ACPI: Reserving FACP table memory at [mem 0xdfea0290-0xdfea0383] [ 0.109995] ACPI: Reserving DSDT table memory at [mem 0xdfea0600-0xdfea5c2a] [ 0.109996] ACPI: Reserving FACS table memory at [mem 0xdfeb2000-0xdfeb203f] [ 0.109998] ACPI: Reserving FACS table memory at [mem 0xdfeb2000-0xdfeb203f] [ 0.109999] ACPI: Reserving MCFG table memory at [mem 0xdfea0440-0xdfea047b] [ 0.110000] ACPI: Reserving SSDT table memory at [mem 0xdfeaa6f0-0xdfeab28b] [ 0.110085] Zone ranges: [ 0.110087] DMA [mem 0x0000000000001000-0x0000000000ffffff] [ 0.110089] DMA32 [mem 0x0000000001000000-0x00000000ffffffff] [ 0.110091] Normal [mem 0x0000000100000000-0x000000021effffff] [ 0.110093] Movable zone start for each node [ 0.110094] Early memory node ranges [ 0.110095] node 0: [mem 0x0000000000001000-0x0000000000099fff] [ 0.110097] node 0: [mem 0x0000000000100000-0x0000000040064fff] [ 0.110099] node 0: [mem 0x0000000040066000-0x00000000dfe8ffff] [ 0.110100] node 0: [mem 0x0000000100000000-0x000000021effffff] [ 0.110102] Initmem setup node 0 [mem 0x0000000000001000-0x000000021effffff] [ 0.110111] On node 0, zone DMA: 1 pages in unavailable ranges [ 0.110182] On node 0, zone DMA: 102 pages in unavailable ranges [ 0.132099] On node 0, zone DMA32: 1 pages in unavailable ranges [ 0.160879] On node 0, zone Normal: 368 pages in unavailable ranges [ 0.161012] On node 0, zone Normal: 4096 pages in unavailable ranges [ 0.161509] ACPI: PM-Timer IO Port: 0x808 [ 0.161644] IOAPIC[0]: apic_id 0, version 17, address 0xfec00000, GSI 0-23 [ 0.161723] IOAPIC[1]: apic_id 1, version 17, address 0xfec20000, GSI 24-55 [ 0.161727] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl) [ 0.161730] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 low level) [ 0.161735] ACPI: Using ACPI (MADT) for SMP configuration information [ 0.161745] CPU topo: Max. logical packages: 1 [ 0.161747] CPU topo: Max. logical dies: 1 [ 0.161748] CPU topo: Max. dies per package: 1 [ 0.161755] CPU topo: Max. threads per core: 1 [ 0.161757] CPU topo: Num. cores per package: 4 [ 0.161757] CPU topo: Num. threads per package: 4 [ 0.161758] CPU topo: Allowing 4 present CPUs plus 0 hotplug CPUs [ 0.161778] PM: hibernation: Registered nosave memory: [mem 0x00000000-0x00000fff] [ 0.161780] PM: hibernation: Registered nosave memory: [mem 0x0009a000-0x0009afff] [ 0.161782] PM: hibernation: Registered nosave memory: [mem 0x0009b000-0x000fffff] [ 0.161783] PM: hibernation: Registered nosave memory: [mem 0x40065000-0x40065fff] [ 0.161785] PM: hibernation: Registered nosave memory: [mem 0x40065000-0x40065fff] [ 0.161787] PM: hibernation: Registered nosave memory: [mem 0xdfe90000-0xdfe9dfff] [ 0.161788] PM: hibernation: Registered nosave memory: [mem 0xdfe9e000-0xdfe9ffff] [ 0.161789] PM: hibernation: Registered nosave memory: [mem 0xdfea0000-0xdfeb1fff] [ 0.161790] PM: hibernation: Registered nosave memory: [mem 0xdfeb2000-0xdfedffff] [ 0.161791] PM: hibernation: Registered nosave memory: [mem 0xdfee0000-0xefffffff] [ 0.161792] PM: hibernation: Registered nosave memory: [mem 0xf0000000-0xffdfffff] [ 0.161793] PM: hibernation: Registered nosave memory: [mem 0xffe00000-0xffffffff] [ 0.161796] [mem 0xf0000000-0xffdfffff] available for PCI devices [ 0.161814] Booting kernel on Xen PVH [ 0.161816] Xen version: 4.19-unstable [ 0.161820] clocksource: refined-jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 1910969940391419 ns [ 0.168263] setup_percpu: NR_CPUS:64 nr_cpumask_bits:4 nr_cpu_ids:4 nr_node_ids:1 [ 0.169149] percpu: Embedded 57 pages/cpu s194408 r8192 d30872 u524288 [ 0.169157] pcpu-alloc: s194408 r8192 d30872 u524288 alloc=1*2097152 [ 0.169162] pcpu-alloc: [0] 0 1 2 3 [ 0.169224] xen: PV spinlocks enabled [ 0.169228] PV qspinlock hash table entries: 256 (order: 0, 4096 bytes, linear) [ 0.169231] Kernel command line: placeholder root=/dev/mapper/pinot0--vg-root ro console=hvc0 [ 0.169302] Unknown kernel command line parameters "placeholder", will be passed to user space. [ 0.169682] Dentry cache hash table entries: 131072 (order: 8, 1048576 bytes, linear) [ 0.169859] Inode-cache hash table entries: 65536 (order: 7, 524288 bytes, linear) [ 0.169918] Built 1 zonelists, mobility grouping on. Total pages: 2092584 [ 0.169922] mem auto-init: stack:all(zero), heap alloc:off, heap free:off [ 0.169928] software IO TLB: area num 4. [ 0.280008] Memory: 790696K/8370336K available (16384K kernel code, 2753K rwdata, 6164K rodata, 2680K init, 1864K bss, 7579384K reserved, 0K cma-reserved) [ 0.280070] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1 [ 0.282009] Dynamic Preempt: voluntary [ 0.282068] rcu: Preemptible hierarchical RCU implementation. [ 0.282069] rcu: RCU event tracing is enabled. [ 0.282070] rcu: RCU restricting CPUs from NR_CPUS=64 to nr_cpu_ids=4. [ 0.282073] Trampoline variant of Tasks RCU enabled. [ 0.282074] rcu: RCU calculated value of scheduler-enlistment delay is 100 jiffies. [ 0.282075] rcu: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=4 [ 0.282089] RCU Tasks: Setting shift to 2 and lim to 1 rcu_task_cb_adjust=1. [ 0.284581] Using NULL legacy PIC [ 0.284583] NR_IRQS: 4352, nr_irqs: 1000, preallocated irqs: 0 [ 0.284650] xen:events: Using FIFO-based ABI [ 0.284702] xen:events: Xen HVM callback vector for event delivery is enabled [ 0.284757] rcu: srcu_init: Setting srcu_struct sizes based on contention. [ 0.290926] Console: colour VGA+ 80x25 [ 0.290931] printk: legacy console [tty0] enabled [ 0.303494] printk: legacy console [hvc0] enabled [ 0.307725] ACPI: Core revision 20240322 [ 0.311443] Failed to register legacy timer interrupt [ 0.311567] APIC: Switch to symmetric I/O mode setup [ 0.313383] x2apic enabled [ 0.315485] APIC: Switched APIC routing to: physical x2apic [ 0.315811] clocksource: tsc-early: mask: 0xffffffffffffffff max_cycles: 0x285c40e2248, max_idle_ns: 440795340634 ns [ 0.316016] Calibrating delay loop (skipped), value calculated using timer frequency.. 5600.00 BogoMIPS (lpj=2800000) [ 0.316599] Last level iTLB entries: 4KB 512, 2MB 1024, 4MB 512 [ 0.316733] Last level dTLB entries: 4KB 1024, 2MB 1024, 4MB 512, 1GB 0 [ 0.316873] Spectre V1 : Mitigation: usercopy/swapgs barriers and __user pointer sanitization [ 0.317009] Spectre V2 : Mitigation: Retpolines [ 0.317009] Spectre V2 : Spectre v2 / SpectreRSB mitigation: Filling RSB on context switch [ 0.317009] Spectre V2 : Spectre v2 / SpectreRSB : Filling RSB on VMEXIT [ 0.317009] Spectre V2 : Enabling Speculation Barrier for firmware calls [ 0.317009] RETBleed: Mitigation: untrained return thunk [ 0.317009] Spectre V2 : mitigation: Enabling conditional Indirect Branch Prediction Barrier [ 0.317009] Speculative Store Bypass: Mitigation: Speculative Store Bypass disabled via prctl [ 0.317009] x86/fpu: Supporting XSAVE feature 0x001: 'x87 floating point registers' [ 0.317009] x86/fpu: Supporting XSAVE feature 0x002: 'SSE registers' [ 0.317009] x86/fpu: Supporting XSAVE feature 0x004: 'AVX registers' [ 0.317009] x86/fpu: xstate_offset[2]: 576, xstate_sizes[2]: 256 [ 0.317009] x86/fpu: Enabled xstate features 0x7, context size is 832 bytes, using 'standard' format. [ 0.317009] Freeing SMP alternatives memory: 40K [ 0.317009] pid_max: default: 32768 minimum: 301 [ 0.317009] LSM: initializing lsm=capability,selinux [ 0.317009] SELinux: Initializing. [ 0.317009] Mount-cache hash table entries: 2048 (order: 2, 16384 bytes, linear) [ 0.317009] Mountpoint-cache hash table entries: 2048 (order: 2, 16384 bytes, linear) [ 0.317009] clocksource: xen: mask: 0xffffffffffffffff max_cycles: 0x1cd42e4dffb, max_idle_ns: 881590591483 ns [ 0.317009] Xen: using vcpuop timer interface [ 0.317009] installing Xen timer for CPU 0 [ 0.317009] smpboot: CPU0: AMD Opteron(tm) Processor 3350 HE (family: 0x15, model: 0x2, stepping: 0x0) [ 0.317009] cpu 0 spinlock event irq 28 [ 0.317009] Performance Events: PMU not available due to virtualization, using software events only. [ 0.317009] signal: max sigframe size: 1776 [ 0.317066] rcu: Hierarchical SRCU implementation. [ 0.317191] rcu: Max phase no-delay instances is 400. [ 0.321943] smp: Bringing up secondary CPUs ... [ 0.322180] installing Xen timer for CPU 1 [ 0.322443] smpboot: x86: Booting SMP configuration: [ 0.322569] .... node #0, CPUs: #1 [ 0.324275] installing Xen timer for CPU 2 [ 0.324692] #2 [ 0.326743] installing Xen timer for CPU 3 [ 0.328145] #3 [ 0.331099] cpu 1 spinlock event irq 41 [ 0.333119] cpu 2 spinlock event irq 42 [ 0.337299] cpu 3 spinlock event irq 43 [ 0.338532] smp: Brought up 1 node, 4 CPUs [ 0.338922] smpboot: Total of 4 processors activated (22400.00 BogoMIPS) [ 0.341340] devtmpfs: initialized [ 0.341340] x86/mm: Memory block size: 128MB [ 0.347364] ACPI: PM: Registering ACPI NVS region [mem 0xdfeb2000-0xdfedffff] (188416 bytes) [ 0.348490] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 1911260446275000 ns [ 0.349112] futex hash table entries: 1024 (order: 4, 65536 bytes, linear) [ 0.349992] PM: RTC time: 02:38:40, date: 2024-06-24 [ 0.351218] NET: Registered PF_NETLINK/PF_ROUTE protocol family [ 0.351841] xen:grant_table: Grant tables using version 1 layout [ 0.352521] Grant table initialized [ 0.354430] audit: initializing netlink subsys (disabled) [ 0.355200] audit: type=2000 audit(1719196720.845:1): state=initialized audit_enabled=0 res=1 [ 0.356285] thermal_sys: Registered thermal governor 'step_wise' [ 0.356289] thermal_sys: Registered thermal governor 'user_space' [ 0.356456] cpuidle: using governor menu [ 0.360127] PCI: ECAM [mem 0xe0000000-0xefffffff] (base 0xe0000000) for domain 0000 [bus 00-ff] [ 0.360715] PCI: ECAM [mem 0xe0000000-0xefffffff] reserved as E820 entry [ 0.361248] PCI: Using configuration type 1 for base access [ 0.362213] kprobes: kprobe jump-optimization is enabled. All kprobes are optimized if possible. [ 0.364430] HugeTLB: registered 1.00 GiB page size, pre-allocated 0 pages [ 0.365133] HugeTLB: 16380 KiB vmemmap can be freed for a 1.00 GiB page [ 0.365378] HugeTLB: registered 2.00 MiB page size, pre-allocated 0 pages [ 0.365783] HugeTLB: 28 KiB vmemmap can be freed for a 2.00 MiB page [ 0.366426] ACPI: Added _OSI(Module Device) [ 0.367117] ACPI: Added _OSI(Processor Device) [ 0.367351] ACPI: Added _OSI(3.0 _SCP Extensions) [ 0.367697] ACPI: Added _OSI(Processor Aggregator Device) [ 0.387274] ACPI: 2 ACPI AML tables successfully acquired and loaded [ 0.398676] ACPI: _OSC evaluation for CPUs failed, trying _PDC [ 0.400561] ACPI: Interpreter enabled [ 0.400936] ACPI: PM: (supports S0 S1 S4 S5) [ 0.401101] ACPI: Using IOAPIC for interrupt routing [ 0.401534] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug [ 0.402022] PCI: Using E820 reservations for host bridge windows [ 0.403073] ACPI: Enabled 4 GPEs in block 00 to 1F [ 0.422825] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff]) [ 0.422987] acpi PNP0A08:00: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI HPX-Type3] [ 0.423256] acpi PNP0A08:00: _OSC: OS requested [PME PCIeCapability LTR] [ 0.423396] acpi PNP0A08:00: _OSC: platform willing to grant [PME PCIeCapability LTR] [ 0.423615] acpi PNP0A08:00: _OSC: platform retains control of PCIe features (AE_NOT_FOUND) [ 0.424180] PCI host bridge to bus 0000:00 [ 0.424298] pci_bus 0000:00: root bus resource [io 0x0000-0x0cf7 window] [ 0.424451] pci_bus 0000:00: root bus resource [io 0x0d00-0xffff window] [ 0.424631] pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff window] [ 0.424807] pci_bus 0000:00: root bus resource [mem 0x000d0000-0x000dffff window] [ 0.425006] pci_bus 0000:00: root bus resource [mem 0xf0000000-0xfebfffff window] [ 0.425180] pci_bus 0000:00: root bus resource [bus 00-ff] [ 0.425382] pci 0000:00:00.0: [1002:5a13] type 00 class 0x060000 conventional PCI endpoint [ 0.426074] pci 0000:00:00.2: [1002:5a23] type 00 class 0x080600 conventional PCI endpoint [ 0.426754] pci 0000:00:09.0: [1002:5a1c] type 01 class 0x060400 PCIe Root Port [ 0.427051] pci 0000:00:09.0: PCI bridge to [bus 01] [ 0.427232] pci 0000:00:09.0: bridge window [io 0xd000-0xdfff] [ 0.427401] pci 0000:00:09.0: bridge window [mem 0xfe900000-0xfe9fffff] [ 0.427631] pci 0000:00:09.0: enabling Extended Tags [ 0.428007] pci 0000:00:09.0: PME# supported from D0 D3hot D3cold [ 0.428613] pci 0000:00:0a.0: [1002:5a1d] type 01 class 0x060400 PCIe Root Port [ 0.428947] pci 0000:00:0a.0: PCI bridge to [bus 02] [ 0.429033] pci 0000:00:0a.0: bridge window [io 0xe000-0xefff] [ 0.429177] pci 0000:00:0a.0: bridge window [mem 0xfea00000-0xfeafffff] [ 0.429366] pci 0000:00:0a.0: enabling Extended Tags [ 0.429763] pci 0000:00:0a.0: PME# supported from D0 D3hot D3cold [ 0.430325] pci 0000:00:11.0: [1002:4390] type 00 class 0x01018f conventional PCI endpoint [ 0.430595] pci 0000:00:11.0: BAR 0 [io 0xc000-0xc007] [ 0.430769] pci 0000:00:11.0: BAR 1 [io 0xb000-0xb003] [ 0.430950] pci 0000:00:11.0: BAR 2 [io 0xa000-0xa007] [ 0.431196] pci 0000:00:11.0: BAR 3 [io 0x9000-0x9003] [ 0.431359] pci 0000:00:11.0: BAR 4 [io 0x8000-0x800f] [ 0.431520] pci 0000:00:11.0: BAR 5 [mem 0xfebfbc00-0xfebfbfff] [ 0.431765] pci 0000:00:11.0: set SATA to AHCI mode [ 0.432146] pci 0000:00:12.0: [1002:4397] type 00 class 0x0c0310 conventional PCI endpoint [ 0.432426] pci 0000:00:12.0: BAR 0 [mem 0xfebf9000-0xfebf9fff] [ 0.433178] pci 0000:00:12.1: [1002:4398] type 00 class 0x0c0310 conventional PCI endpoint [ 0.433454] pci 0000:00:12.1: BAR 0 [mem 0xfebfa000-0xfebfafff] [ 0.434188] pci 0000:00:12.2: [1002:4396] type 00 class 0x0c0320 conventional PCI endpoint [ 0.434437] pci 0000:00:12.2: BAR 0 [mem 0xfebfb800-0xfebfb8ff] [ 0.434991] pci 0000:00:12.2: supports D1 D2 [ 0.435115] pci 0000:00:12.2: PME# supported from D0 D1 D2 D3hot [ 0.435501] pci 0000:00:13.0: [1002:4397] type 00 class 0x0c0310 conventional PCI endpoint [ 0.435787] pci 0000:00:13.0: BAR 0 [mem 0xfebf7000-0xfebf7fff] [ 0.436500] pci 0000:00:13.1: [1002:4398] type 00 class 0x0c0310 conventional PCI endpoint [ 0.436796] pci 0000:00:13.1: BAR 0 [mem 0xfebf8000-0xfebf8fff] [ 0.437526] pci 0000:00:13.2: [1002:4396] type 00 class 0x0c0320 conventional PCI endpoint [ 0.437771] pci 0000:00:13.2: BAR 0 [mem 0xfebfb400-0xfebfb4ff] [ 0.438377] pci 0000:00:13.2: supports D1 D2 [ 0.438504] pci 0000:00:13.2: PME# supported from D0 D1 D2 D3hot [ 0.438830] pci 0000:00:14.0: [1002:4385] type 00 class 0x0c0500 conventional PCI endpoint [ 0.439688] pci 0000:00:14.1: [1002:439c] type 00 class 0x01018a conventional PCI endpoint [ 0.439909] pci 0000:00:14.1: BAR 0 [io 0x0000-0x0007] [ 0.440043] pci 0000:00:14.1: BAR 1 [io 0x0000-0x0003] [ 0.440231] pci 0000:00:14.1: BAR 2 [io 0x0000-0x0007] [ 0.440444] pci 0000:00:14.1: BAR 3 [io 0x0000-0x0003] [ 0.440646] pci 0000:00:14.1: BAR 4 [io 0xff00-0xff0f] [ 0.440831] pci 0000:00:14.1: BAR 0 [io 0x01f0-0x01f7]: legacy IDE quirk [ 0.440970] pci 0000:00:14.1: BAR 1 [io 0x03f6]: legacy IDE quirk [ 0.441019] pci 0000:00:14.1: BAR 2 [io 0x0170-0x0177]: legacy IDE quirk [ 0.441160] pci 0000:00:14.1: BAR 3 [io 0x0376]: legacy IDE quirk [ 0.441595] pci 0000:00:14.3: [1002:439d] type 00 class 0x060100 conventional PCI endpoint [ 0.442350] pci 0000:00:14.4: [1002:4384] type 01 class 0x060401 conventional PCI bridge [ 0.442691] pci 0000:00:14.4: PCI bridge to [bus 03] (subtractive decode) [ 0.442864] pci 0000:00:14.4: bridge window [mem 0xfdf00000-0xfe7fffff] [ 0.443023] pci 0000:00:14.4: bridge window [mem 0xfc000000-0xfcffffff pref] [ 0.443424] pci 0000:00:14.5: [1002:4399] type 00 class 0x0c0310 conventional PCI endpoint [ 0.443725] pci 0000:00:14.5: BAR 0 [mem 0xfebf6000-0xfebf6fff] [ 0.444429] pci 0000:00:18.0: [1022:1600] type 00 class 0x060000 conventional PCI endpoint [ 0.445001] pci 0000:00:18.1: [1022:1601] type 00 class 0x060000 conventional PCI endpoint [ 0.445523] pci 0000:00:18.2: [1022:1602] type 00 class 0x060000 conventional PCI endpoint [ 0.446065] pci 0000:00:18.3: [1022:1603] type 00 class 0x060000 conventional PCI endpoint [ 0.446625] pci 0000:00:18.4: [1022:1604] type 00 class 0x060000 conventional PCI endpoint [ 0.447156] pci 0000:00:18.5: [1022:1605] type 00 class 0x060000 conventional PCI endpoint [ 0.447933] pci 0000:01:00.0: [8086:10d3] type 00 class 0x020000 PCIe Endpoint [ 0.448452] pci 0000:01:00.0: BAR 0 [mem 0xfe9e0000-0xfe9fffff] [ 0.449409] pci 0000:01:00.0: BAR 2 [io 0xd800-0xd81f] [ 0.450024] pci 0000:01:00.0: BAR 3 [mem 0xfe9dc000-0xfe9dffff] [ 0.451703] pci 0000:01:00.0: PME# supported from D0 D3hot D3cold [ 0.455066] pci 0000:00:09.0: PCI bridge to [bus 01] [ 0.455460] pci 0000:02:00.0: [8086:10d3] type 00 class 0x020000 PCIe Endpoint [ 0.456020] pci 0000:02:00.0: BAR 0 [mem 0xfeae0000-0xfeafffff] [ 0.456956] pci 0000:02:00.0: BAR 2 [io 0xe800-0xe81f] [ 0.457382] pci 0000:02:00.0: BAR 3 [mem 0xfeadc000-0xfeadffff] [ 0.460300] pci 0000:02:00.0: PME# supported from D0 D3hot D3cold [ 0.461423] pci 0000:00:0a.0: PCI bridge to [bus 02] [ 0.461862] pci_bus 0000:03: extended config space not accessible [ 0.462105] pci 0000:03:04.0: [102b:0532] type 00 class 0x030000 conventional PCI endpoint [ 0.462571] pci 0000:03:04.0: BAR 0 [mem 0xfc000000-0xfcffffff pref] [ 0.463021] pci 0000:03:04.0: BAR 1 [mem 0xfdffc000-0xfdffffff] [ 0.463427] pci 0000:03:04.0: BAR 2 [mem 0xfe000000-0xfe7fffff] [ 0.465395] pci 0000:03:04.0: Video device with shadowed ROM at [mem 0x000c0000-0x000dffff] [ 0.465894] pci 0000:00:14.4: PCI bridge to [bus 03] (subtractive decode) [ 0.466048] pci 0000:00:14.4: bridge window [io 0x0000-0x0cf7 window] (subtractive decode) [ 0.467042] pci 0000:00:14.4: bridge window [io 0x0d00-0xffff window] (subtractive decode) [ 0.467313] pci 0000:00:14.4: bridge window [mem 0x000a0000-0x000bffff window] (subtractive decode) [ 0.467872] pci 0000:00:14.4: bridge window [mem 0x000d0000-0x000dffff window] (subtractive decode) [ 0.468195] pci 0000:00:14.4: bridge window [mem 0xf0000000-0xfebfffff window] (subtractive decode) [ 0.469142] pci_bus 0000:00: on NUMA node 0 [ 0.471479] ACPI: PCI: Interrupt link LNKA configured for IRQ 10 [ 0.471689] ACPI: PCI: Interrupt link LNKB configured for IRQ 11 [ 0.471894] ACPI: PCI: Interrupt link LNKC configured for IRQ 10 [ 0.472331] ACPI: PCI: Interrupt link LNKD configured for IRQ 10 [ 0.472829] ACPI: PCI: Interrupt link LNKE configured for IRQ 7 [ 0.473038] ACPI: PCI: Interrupt link LNKF configured for IRQ 10 [ 0.473237] ACPI: PCI: Interrupt link LNKG configured for IRQ 11 [ 0.473476] ACPI: PCI: Interrupt link LNKH configured for IRQ 10 [ 0.473775] xen:balloon: Initialising balloon driver [ 0.635214] iommu: Default domain type: Translated [ 0.635411] iommu: DMA domain TLB invalidation policy: lazy mode [ 0.635411] SCSI subsystem initialized [ 0.636076] libata version 3.00 loaded. [ 0.636142] ACPI: bus type USB registered [ 0.636315] usbcore: registered new interface driver usbfs [ 0.636315] usbcore: registered new interface driver hub [ 0.636349] usbcore: registered new device driver usb [ 0.636498] pps_core: LinuxPPS API ver. 1 registered [ 0.636626] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti [ 0.636817] PTP clock support registered [ 0.638131] Advanced Linux Sound Architecture Driver Initialized. [ 0.639926] NetLabel: Initializing [ 0.640191] NetLabel: domain hash size = 128 [ 0.640569] NetLabel: protocols = UNLABELED CIPSOv4 CALIPSO [ 0.641216] NetLabel: unlabeled traffic allowed by default [ 0.642155] PCI: Using ACPI for IRQ routing [ 0.682972] PCI: pci_cache_line_size set to 64 bytes [ 0.682972] e820: reserve RAM buffer [mem 0x0009a000-0x0009ffff] [ 0.682972] e820: reserve RAM buffer [mem 0x40065f00-0x43ffffff] [ 0.682972] e820: reserve RAM buffer [mem 0xdfe90000-0xdfffffff] [ 0.682972] e820: reserve RAM buffer [mem 0x21f000000-0x21fffffff] [ 0.683088] pci 0000:03:04.0: vgaarb: setting as boot VGA device [ 0.683243] pci 0000:03:04.0: vgaarb: bridge control possible [ 0.683379] pci 0000:03:04.0: vgaarb: VGA device added: decodes=io+mem,owns=io+mem,locks=none [ 0.683611] vgaarb: loaded [ 0.684026] clocksource: Switched to clocksource tsc-early [ 0.684430] VFS: Disk quotas dquot_6.6.0 [ 0.685040] VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes) [ 0.685728] pnp: PnP ACPI init [ 0.686451] system 00:00: [mem 0xfec20000-0xfec200ff] could not be reserved [ 0.686723] system 00:01: [mem 0xf6000000-0xf6003fff] has been reserved [ 0.688253] system 00:03: [io 0x0a10-0x0a1f] has been reserved [ 0.688581] system 00:04: [mem 0xfec00000-0xfec00fff] could not be reserved [ 0.688737] system 00:04: [mem 0xfee00000-0xfee00fff] has been reserved [ 0.689988] system 00:05: [io 0x0ca2-0x0ca3] has been reserved [ 0.690393] system 00:05: [io 0x0550-0x0551] has been reserved [ 0.690804] system 00:05: [io 0x04d0-0x04d1] has been reserved [ 0.691199] system 00:05: [io 0x040b] has been reserved [ 0.691333] system 00:05: [io 0x04d6] has been reserved [ 0.691461] system 00:05: [io 0x0c00-0x0c01] has been reserved [ 0.691650] system 00:05: [io 0x0c14] has been reserved [ 0.691778] system 00:05: [io 0x0c50-0x0c51] has been reserved [ 0.691914] system 00:05: [io 0x0c52] has been reserved [ 0.692072] system 00:05: [io 0x0c6c] has been reserved [ 0.692221] system 00:05: [io 0x0c6f] has been reserved [ 0.692349] system 00:05: [io 0x0cd0-0x0cd1] has been reserved [ 0.692485] system 00:05: [io 0x0cd2-0x0cd3] has been reserved [ 0.692620] system 00:05: [io 0x0cd4-0x0cd5] has been reserved [ 0.692782] system 00:05: [io 0x0cd6-0x0cd7] has been reserved [ 0.692945] system 00:05: [io 0x0cd8-0x0cdf] has been reserved [ 0.693136] system 00:05: [io 0x0800-0x089f] has been reserved [ 0.693285] system 00:05: [io 0x0b00-0x0b0f] has been reserved [ 0.693423] system 00:05: [io 0x0b20-0x0b3f] has been reserved [ 0.693559] system 00:05: [io 0x0900-0x090f] has been reserved [ 0.693694] system 00:05: [io 0x0910-0x091f] has been reserved [ 0.693830] system 00:05: [io 0xfe00-0xfefe] has been reserved [ 0.693994] system 00:05: [mem 0xffb80000-0xffbfffff] has been reserved [ 0.694206] system 00:05: [mem 0xfec10000-0xfec1001f] has been reserved [ 0.694383] system 00:05: [mem 0xffe50000-0xffe5e05f] has been reserved [ 0.694851] pnp 00:06: [dma 0 disabled] [ 0.695410] pnp 00:07: [dma 0 disabled] [ 0.696148] system 00:08: [mem 0xe0000000-0xefffffff] has been reserved [ 0.696642] pnp 00:09: disabling [mem 0x000c0000-0x000cffff] because it overlaps 0000:03:04.0 BAR 6 [mem 0x000c0000-0x000dffff] [ 0.696872] unchecked MSR access error: RDMSR from 0xc0010058 at rIP: 0xffffffff81122487 (native_read_msr+0x7/0x40) [ 0.697143] Call Trace: [ 0.697250] [ 0.697355] ? ex_handler_msr+0x119/0x140 [ 0.697478] ? fixup_exception+0xbb/0x2e0 [ 0.697598] ? exc_general_protection+0xf2/0x400 [ 0.697732] ? asm_exc_general_protection+0x26/0x30 [ 0.697860] ? native_read_msr+0x7/0x40 [ 0.697976] amd_get_mmconfig_range+0x34/0x80 [ 0.698129] quirk_amd_mmconfig_area+0x35/0x100 [ 0.698266] pnp_fixup_device+0x27/0x80 [ 0.698384] __pnp_add_device+0xe/0x150 [ 0.698541] pnp_add_device+0x49/0xd0 [ 0.698657] pnpacpi_add_device_handler+0x1d4/0x240 [ 0.698787] acpi_ns_get_device_callback+0x11d/0x1d0 [ 0.698940] ? sysfs_add_file_mode_ns+0x6d/0x130 [ 0.699093] ? _raw_spin_unlock_irqrestore+0x13/0x50 [ 0.699228] ? down_timeout+0x39/0x60 [ 0.699345] acpi_ns_walk_namespace+0x1cf/0x260 [ 0.699470] ? __pfx_acpi_ns_get_device_callback+0x10/0x10 [ 0.699598] acpi_get_devices+0xa3/0xc0 [ 0.699713] ? __pfx_pnpacpi_add_device_handler+0x10/0x10 [ 0.699868] ? __pfx_pnpacpi_init+0x10/0x10 [ 0.699985] pnpacpi_init+0x4f/0x80 [ 0.700143] do_one_initcall+0x56/0x250 [ 0.700267] kernel_init_freeable+0x1d9/0x310 [ 0.700395] ? __pfx_kernel_init+0x10/0x10 [ 0.700512] kernel_init+0x15/0x1b0 [ 0.700627] ret_from_fork+0x2f/0x50 [ 0.700745] ? __pfx_kernel_init+0x10/0x10 [ 0.700861] ret_from_fork_asm+0x1a/0x30 [ 0.700978] [ 0.701137] system 00:09: [mem 0x00000000-0x0009ffff] could not be reserved [ 0.701337] system 00:09: [mem 0x000e0000-0x000fffff] could not be reserved [ 0.701477] system 00:09: [mem 0x00100000-0xdfffffff] could not be reserved [ 0.701617] system 00:09: [mem 0xfec00000-0xffffffff] could not be reserved [ 0.701894] pnp: PnP ACPI: found 10 devices [ 0.734848] PM-Timer failed consistency check (0xffffff) - aborting. [ 0.735120] NET: Registered PF_INET protocol family [ 0.735367] IP idents hash table entries: 16384 (order: 5, 131072 bytes, linear) [ 0.735991] tcp_listen_portaddr_hash hash table entries: 512 (order: 1, 8192 bytes, linear) [ 0.736257] Table-perturb hash table entries: 65536 (order: 6, 262144 bytes, linear) [ 0.736459] TCP established hash table entries: 8192 (order: 4, 65536 bytes, linear) [ 0.736670] TCP bind hash table entries: 8192 (order: 6, 262144 bytes, linear) [ 0.736966] TCP: Hash tables configured (established 8192 bind 8192) [ 0.737255] UDP hash table entries: 512 (order: 2, 16384 bytes, linear) [ 0.737424] UDP-Lite hash table entries: 512 (order: 2, 16384 bytes, linear) [ 0.737614] NET: Registered PF_UNIX/PF_LOCAL protocol family [ 0.738542] RPC: Registered named UNIX socket transport module. [ 0.738729] RPC: Registered udp transport module. [ 0.738856] RPC: Registered tcp transport module. [ 0.738980] RPC: Registered tcp-with-tls transport module. [ 0.739142] RPC: Registered tcp NFSv4.1 backchannel transport module. [ 0.740178] pci 0000:00:09.0: PCI bridge to [bus 01] [ 0.740325] pci 0000:00:09.0: bridge window [io 0xd000-0xdfff] [ 0.740502] pci 0000:00:09.0: bridge window [mem 0xfe900000-0xfe9fffff] [ 0.740659] pci 0000:00:0a.0: PCI bridge to [bus 02] [ 0.740789] pci 0000:00:0a.0: bridge window [io 0xe000-0xefff] [ 0.740933] pci 0000:00:0a.0: bridge window [mem 0xfea00000-0xfeafffff] [ 0.741124] pci 0000:00:14.4: PCI bridge to [bus 03] [ 0.741451] pci 0000:00:14.4: bridge window [mem 0xfdf00000-0xfe7fffff] [ 0.741930] pci 0000:00:14.4: bridge window [mem 0xfc000000-0xfcffffff pref] [ 0.742314] pci_bus 0000:00: resource 4 [io 0x0000-0x0cf7 window] [ 0.742454] pci_bus 0000:00: resource 5 [io 0x0d00-0xffff window] [ 0.742590] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff window] [ 0.742729] pci_bus 0000:00: resource 7 [mem 0x000d0000-0x000dffff window] [ 0.742919] pci_bus 0000:00: resource 8 [mem 0xf0000000-0xfebfffff window] [ 0.743092] pci_bus 0000:01: resource 0 [io 0xd000-0xdfff] [ 0.743227] pci_bus 0000:01: resource 1 [mem 0xfe900000-0xfe9fffff] [ 0.743365] pci_bus 0000:02: resource 0 [io 0xe000-0xefff] [ 0.743492] pci_bus 0000:02: resource 1 [mem 0xfea00000-0xfeafffff] [ 0.743629] pci_bus 0000:03: resource 1 [mem 0xfdf00000-0xfe7fffff] [ 0.743765] pci_bus 0000:03: resource 2 [mem 0xfc000000-0xfcffffff pref] [ 0.743902] pci_bus 0000:03: resource 4 [io 0x0000-0x0cf7 window] [ 0.744076] pci_bus 0000:03: resource 5 [io 0x0d00-0xffff window] [ 0.744239] pci_bus 0000:03: resource 6 [mem 0x000a0000-0x000bffff window] [ 0.744397] pci_bus 0000:03: resource 7 [mem 0x000d0000-0x000dffff window] [ 0.744535] pci_bus 0000:03: resource 8 [mem 0xf0000000-0xfebfffff window] [ 1.408276] pci 0000:00:12.0: quirk_usb_early_handoff+0x0/0x7c0 took 647941 usecs [ 1.432544] pci 0000:00:12.1: quirk_usb_early_handoff+0x0/0x7c0 took 23491 usecs [ 1.457361] pci 0000:00:13.0: quirk_usb_early_handoff+0x0/0x7c0 took 23337 usecs [ 1.482324] pci 0000:00:13.1: quirk_usb_early_handoff+0x0/0x7c0 took 24144 usecs [ 1.508267] pci 0000:00:14.5: quirk_usb_early_handoff+0x0/0x7c0 took 24872 usecs [ 1.508519] PCI: CLS 64 bytes, default 64 [ 1.508686] PCI-DMA: Using software bounce buffering for IO (SWIOTLB) [ 1.508851] software IO TLB: mapped [mem 0x0000000033c80000-0x0000000037c80000] (64MB) [ 1.509088] Unpacking initramfs... [ 1.509302] kvm_intel: VMX not supported by CPU 1 [ 1.509429] kvm_amd: SVM not supported by CPU 1 [ 1.509555] clocksource: tsc: mask: 0xffffffffffffffff max_cycles: 0x285c40e2248, max_idle_ns: 440795340634 ns [ 1.511706] clocksource: Switched to clocksource tsc [ 1.520553] Initialise system trusted keyrings [ 1.521304] workingset: timestamp_bits=62 max_order=18 bucket_order=0 [ 1.521745] NFS: Registering the id_resolver key type [ 1.521886] Key type id_resolver registered [ 1.522001] Key type id_legacy registered [ 1.522276] 9p: Installing v9fs 9p2000 file system support [ 1.540440] Key type asymmetric registered [ 1.540572] Asymmetric key parser 'x509' registered [ 1.540716] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 251) [ 1.540904] io scheduler mq-deadline registered [ 1.541063] io scheduler kyber registered [ 1.543367] input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input0 [ 1.543582] ACPI: button: Power Button [PWRB] [ 1.543764] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input1 [ 1.544082] ACPI: button: Power Button [PWRF] [ 1.545510] xen:xen_evtchn: Event-channel device installed [ 1.545786] xen_pciback: backend is vpci [ 1.547846] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled [ 1.548537] 00:07: ttyS1 at I/O 0x2f8 (irq = 3, base_baud = 115200) is a 16550A [ 1.552479] hpet_acpi_add: no address or irqs in _CRS [ 1.553561] Non-volatile memory driver v1.3 [ 1.558833] loop: module loaded [ 1.596880] ahci 0000:00:11.0: version 3.0 [ 1.597209] ahci 0000:00:11.0: AHCI vers 0001.0100, 32 command slots, 3 Gbps, SATA mode [ 1.597433] ahci 0000:00:11.0: 4/4 ports implemented (port mask 0xf) [ 1.597572] ahci 0000:00:11.0: flags: 64bit ncq sntf ilck pm led clo pmp pio slum part ccc [ 1.599639] scsi host0: ahci [ 1.601712] scsi host1: ahci [ 1.603745] scsi host2: ahci [ 1.605232] scsi host3: ahci [ 1.605453] ata1: SATA max UDMA/133 abar m1024@0xfebfbc00 port 0xfebfbd00 irq 22 lpm-pol 0 [ 1.605633] ata2: SATA max UDMA/133 abar m1024@0xfebfbc00 port 0xfebfbd80 irq 22 lpm-pol 0 [ 1.605809] ata3: SATA max UDMA/133 abar m1024@0xfebfbc00 port 0xfebfbe00 irq 22 lpm-pol 0 [ 1.605986] ata4: SATA max UDMA/133 abar m1024@0xfebfbc00 port 0xfebfbe80 irq 22 lpm-pol 0 [ 1.606734] tun: Universal TUN/TAP device driver, 1.6 [ 1.607207] e100: Intel(R) PRO/100 Network Driver [ 1.607383] e100: Copyright(c) 1999-2006 Intel Corporation [ 1.607577] sky2: driver version 1.30 [ 1.607746] xen_netfront: Initialising Xen virtual ethernet driver [ 1.608765] ehci-pci 0000:00:12.2: EHCI Host Controller [ 1.609459] ehci-pci 0000:00:12.2: new USB bus registered, assigned bus number 1 [ 1.610008] ehci-pci 0000:00:12.2: applying AMD SB700/SB800/Hudson-2/3 EHCI dummy qh workaround [ 1.610507] ehci-pci 0000:00:12.2: debug port 1 [ 1.610834] ehci-pci 0000:00:12.2: irq 17, io mem 0xfebfb800 [ 1.617324] ehci-pci 0000:00:12.2: USB 2.0 started, EHCI 1.00 [ 1.618067] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 6.10 [ 1.618483] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 1.619060] usb usb1: Product: EHCI Host Controller [ 1.619406] usb usb1: Manufacturer: Linux 6.10.0-rc5 ehci_hcd [ 1.619547] usb usb1: SerialNumber: 0000:00:12.2 [ 1.620038] hub 1-0:1.0: USB hub found [ 1.620163] hub 1-0:1.0: 6 ports detected [ 1.620543] ohci-pci 0000:00:12.0: OHCI PCI host controller [ 1.620825] ohci-pci 0000:00:12.0: new USB bus registered, assigned bus number 2 [ 1.621207] ohci-pci 0000:00:12.0: irq 16, io mem 0xfebf9000 [ 1.678401] usb usb2: New USB device found, idVendor=1d6b, idProduct=0001, bcdDevice= 6.10 [ 1.678618] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 1.678791] usb usb2: Product: OHCI PCI host controller [ 1.678918] usb usb2: Manufacturer: Linux 6.10.0-rc5 ohci_hcd [ 1.679053] usb usb2: SerialNumber: 0000:00:12.0 [ 1.679527] hub 2-0:1.0: USB hub found [ 1.679694] hub 2-0:1.0: 3 ports detected [ 1.680040] ehci-pci 0000:00:13.2: EHCI Host Controller [ 1.680462] ehci-pci 0000:00:13.2: new USB bus registered, assigned bus number 3 [ 1.680973] ehci-pci 0000:00:13.2: applying AMD SB700/SB800/Hudson-2/3 EHCI dummy qh workaround [ 1.681872] ehci-pci 0000:00:13.2: debug port 1 [ 1.683717] ehci-pci 0000:00:13.2: irq 19, io mem 0xfebfb400 [ 1.690357] ehci-pci 0000:00:13.2: USB 2.0 started, EHCI 1.00 [ 1.690659] usb usb3: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 6.10 [ 1.691084] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 1.691924] usb usb3: Product: EHCI Host Controller [ 1.692083] usb usb3: Manufacturer: Linux 6.10.0-rc5 ehci_hcd [ 1.692656] usb usb3: SerialNumber: 0000:00:13.2 [ 1.694534] hub 3-0:1.0: USB hub found [ 1.694970] hub 3-0:1.0: 6 ports detected [ 1.695575] ohci-pci 0000:00:12.1: OHCI PCI host controller [ 1.696310] ohci-pci 0000:00:12.1: new USB bus registered, assigned bus number 4 [ 1.696537] ohci-pci 0000:00:12.1: irq 16, io mem 0xfebfa000 [ 1.752432] usb usb4: New USB device found, idVendor=1d6b, idProduct=0001, bcdDevice= 6.10 [ 1.752624] usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 1.752796] usb usb4: Product: OHCI PCI host controller [ 1.752923] usb usb4: Manufacturer: Linux 6.10.0-rc5 ohci_hcd [ 1.753058] usb usb4: SerialNumber: 0000:00:12.1 [ 1.753554] hub 4-0:1.0: USB hub found [ 1.754045] hub 4-0:1.0: 3 ports detected [ 1.754183] Freeing initrd memory: 20192K [ 1.754939] ohci-pci 0000:00:13.0: OHCI PCI host controller [ 1.755650] ohci-pci 0000:00:13.0: new USB bus registered, assigned bus number 5 [ 1.756035] ohci-pci 0000:00:13.0: irq 18, io mem 0xfebf7000 [ 1.811495] usb usb5: New USB device found, idVendor=1d6b, idProduct=0001, bcdDevice= 6.10 [ 1.811694] usb usb5: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 1.811871] usb usb5: Product: OHCI PCI host controller [ 1.811998] usb usb5: Manufacturer: Linux 6.10.0-rc5 ohci_hcd [ 1.812132] usb usb5: SerialNumber: 0000:00:13.0 [ 1.812601] hub 5-0:1.0: USB hub found [ 1.812770] hub 5-0:1.0: 3 ports detected [ 1.813334] ohci-pci 0000:00:13.1: OHCI PCI host controller [ 1.813793] ohci-pci 0000:00:13.1: new USB bus registered, assigned bus number 6 [ 1.814002] ohci-pci 0000:00:13.1: irq 18, io mem 0xfebf8000 [ 1.869460] usb usb6: New USB device found, idVendor=1d6b, idProduct=0001, bcdDevice= 6.10 [ 1.869689] usb usb6: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 1.869862] usb usb6: Product: OHCI PCI host controller [ 1.869989] usb usb6: Manufacturer: Linux 6.10.0-rc5 ohci_hcd [ 1.870123] usb usb6: SerialNumber: 0000:00:13.1 [ 1.870554] hub 6-0:1.0: USB hub found [ 1.870679] hub 6-0:1.0: 3 ports detected [ 1.871200] ohci-pci 0000:00:14.5: OHCI PCI host controller [ 1.871522] ohci-pci 0000:00:14.5: new USB bus registered, assigned bus number 7 [ 1.871744] ohci-pci 0000:00:14.5: irq 18, io mem 0xfebf6000 [ 1.914265] ata4: SATA link down (SStatus 0 SControl 300) [ 1.915803] ata3: SATA link down (SStatus 0 SControl 300) [ 1.927514] usb usb7: New USB device found, idVendor=1d6b, idProduct=0001, bcdDevice= 6.10 [ 1.927694] usb usb7: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 1.927924] usb usb7: Product: OHCI PCI host controller [ 1.928053] usb usb7: Manufacturer: Linux 6.10.0-rc5 ohci_hcd [ 1.928187] usb usb7: SerialNumber: 0000:00:14.5 [ 1.928578] hub 7-0:1.0: USB hub found [ 1.928701] hub 7-0:1.0: 2 ports detected [ 1.929022] usbcore: registered new interface driver usblp [ 1.929172] usbcore: registered new interface driver usb-storage [ 1.929418] i8042: PNP: No PS/2 controller found. [ 1.929551] i8042: Probing ports directly. [ 1.932700] serio: i8042 KBD port at 0x60,0x64 irq 1 [ 1.932831] serio: i8042 AUX port at 0x60,0x64 irq 12 [ 1.933291] rtc_cmos 00:02: RTC can wake from S4 [ 1.934082] rtc_cmos 00:02: registered as rtc0 [ 1.934236] rtc_cmos 00:02: alarms up to one month, y3k, 114 bytes nvram [ 1.934476] device-mapper: uevent: version 1.0.3 [ 1.934710] device-mapper: ioctl: 4.48.0-ioctl (2023-03-01) initialised: dm-devel@lists.linux.dev [ 1.934940] amd_pstate: the _CPC object is not present in SBIOS or ACPI disabled [ 1.935155] hid: raw HID events driver (C) Jiri Kosina [ 1.935503] usbcore: registered new interface driver usbhid [ 1.935632] usbhid: USB HID core driver [ 1.936280] Initializing XFRM netlink socket [ 1.936446] NET: Registered PF_INET6 protocol family [ 1.937176] Segment Routing with IPv6 [ 1.937350] In-situ OAM (IOAM) with IPv6 [ 1.937515] sit: IPv6, IPv4 and MPLS over IPv4 tunneling driver [ 1.937867] NET: Registered PF_PACKET protocol family [ 1.938023] 9pnet: Installing 9P2000 support [ 1.938177] Key type dns_resolver registered [ 1.938359] x86/pm: family 0x15 cpu detected, MSR saving is needed during suspending. [ 1.939093] IPI shorthand broadcast: enabled [ 1.943504] sched_clock: Marking stable (1912011188, 31248336)->(2051693743, -108434219) [ 1.945675] Timer migration: 1 hierarchy levels; 8 children per group; 1 crossnode level [ 1.946159] registered taskstats version 1 [ 1.946317] Loading compiled-in X.509 certificates [ 1.948544] PM: Magic number: 12:593:612 [ 1.948720] tty tty: hash matches [ 1.948855] printk: legacy console [netcon0] enabled [ 1.948981] netconsole: network logging started [ 1.949438] cfg80211: Loading compiled-in X.509 certificates for regulatory database [ 1.955793] Loaded X.509 cert 'sforshee: 00b28ddf47aef9cea7' [ 1.956310] Loaded X.509 cert 'wens: 61c038651aabdcf94bd0ac7ff06c7248db18c600' [ 1.956511] ALSA device list: [ 1.956627] No soundcards found. [ 1.957452] cfg80211: loaded regulatory.db is malformed or signature is missing/invalid [ 2.075382] ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300) [ 2.075552] ata2: SATA link up 3.0 Gbps (SStatus 123 SControl 300) [ 2.076437] ata2.00: ATA-9: WDC WD1003FZEX-00MK2A0, 01.01A01, max UDMA/133 [ 2.077105] ata2.00: 1953525168 sectors, multi 16: LBA48 NCQ (depth 32), AA [ 2.077335] ata1.00: ATA-8: WDC WD1003FBYZ-010FB0, 01.01V03, max UDMA/133 [ 2.077975] ata1.00: 1953525168 sectors, multi 16: LBA48 NCQ (depth 32), AA [ 2.078516] ata2.00: configured for UDMA/133 [ 2.080731] ata1.00: configured for UDMA/133 [ 2.081004] scsi 0:0:0:0: Direct-Access ATA WDC WD1003FBYZ-0 1V03 PQ: 0 ANSI: 5 [ 2.081586] sd 0:0:0:0: Attached scsi generic sg0 type 0 [ 2.081616] sd 0:0:0:0: [sda] 1953525168 512-byte logical blocks: (1.00 TB/932 GiB) [ 2.081984] sd 0:0:0:0: [sda] Write Protect is off [ 2.082124] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00 [ 2.082176] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 2.082449] sd 0:0:0:0: [sda] Preferred minimum I/O size 512 bytes [ 2.082509] scsi 1:0:0:0: Direct-Access ATA WDC WD1003FZEX-0 1A01 PQ: 0 ANSI: 5 [ 2.083078] sd 1:0:0:0: [sdb] 1953525168 512-byte logical blocks: (1.00 TB/932 GiB) [ 2.083100] sd 1:0:0:0: Attached scsi generic sg1 type 0 [ 2.083176] sd 1:0:0:0: [sdb] 4096-byte physical blocks [ 2.083658] sd 1:0:0:0: [sdb] Write Protect is off [ 2.083795] sd 1:0:0:0: [sdb] Mode Sense: 00 3a 00 00 [ 2.083812] sd 1:0:0:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 2.084023] sd 1:0:0:0: [sdb] Preferred minimum I/O size 4096 bytes [ 2.105573] sd 0:0:0:0: [sda] Attached SCSI disk [ 2.109607] sdb: sdb1 sdb2 < sdb5 > [ 2.110140] sd 1:0:0:0: [sdb] Attached SCSI disk [ 2.111357] Freeing unused kernel image (initmem) memory: 2680K [ 2.111519] Write protecting the kernel read-only data: 24576k [ 2.112852] Freeing unused kernel image (rodata/data gap) memory: 2028K [ 2.163999] x86/mm: Checked W+X mappings: passed, no W+X pages found. [ 2.164140] Run /init as init process [ 2.164275] with arguments: [ 2.164276] /init [ 2.164277] placeholder [ 2.164279] with environment: [ 2.164280] HOME=/ [ 2.164281] TERM=linux [ 2.180319] usb 6-2: new full-speed USB device number 2 using ohci-pci [ 2.301355] e1000e: Intel(R) PRO/1000 Network Driver [ 2.301501] e1000e: Copyright(c) 1999 - 2015 Intel Corporation. [ 2.302049] e1000e 0000:01:00.0: Interrupt Throttling Rate (ints/sec) set to dynamic conservative mode [ 2.345271] e1000e 0000:01:00.0 0000:01:00.0 (uninitialized): registered PHC clock [ 2.346498] usb 6-2: New USB device found, idVendor=0557, idProduct=2221, bcdDevice= 0.01 [ 2.346718] usb 6-2: New USB device strings: Mfr=1, Product=2, SerialNumber=0 [ 2.346892] usb 6-2: Product: Hermon USB hidmouse Device [ 2.347019] usb 6-2: Manufacturer: Winbond Electronics Corp [ 2.352976] input: Winbond Electronics Corp Hermon USB hidmouse Device as /devices/pci0000:00/0000:00:13.1/usb6/6-2/6-2:1.0/0003:0557:2221.0001/input/input5 [ 2.353489] hid-generic 0003:0557:2221.0001: input,hidraw0: USB HID v1.00 Mouse [Winbond Electronics Corp Hermon USB hidmouse Device] on usb-0000:00:13.1-2/input0 [ 2.357241] input: Winbond Electronics Corp Hermon USB hidmouse Device as /devices/pci0000:00/0000:00:13.1/usb6/6-2/6-2:1.1/0003:0557:2221.0002/input/input6 [ 2.389216] e1000e 0000:01:00.0 eth0: (PCI Express:2.5GT/s:Width x1) 00:25:90:ae:e8:ac [ 2.389445] e1000e 0000:01:00.0 eth0: Intel(R) PRO/1000 Network Connection [ 2.389748] e1000e 0000:01:00.0 eth0: MAC: 3, PHY: 8, PBA No: 0100FF-0FF [ 2.390340] e1000e 0000:02:00.0: Interrupt Throttling Rate (ints/sec) set to dynamic conservative mode [ 2.410374] hid-generic 0003:0557:2221.0002: input,hidraw1: USB HID v1.00 Keyboard [Winbond Electronics Corp Hermon USB hidmouse Device] on usb-0000:00:13.1-2/input1 [ 2.437544] e1000e 0000:02:00.0 0000:02:00.0 (uninitialized): registered PHC clock [ 2.471347] random: crng init done [ 2.484311] e1000e 0000:02:00.0 eth1: (PCI Express:2.5GT/s:Width x1) 00:25:90:ae:e8:ad [ 2.484512] e1000e 0000:02:00.0 eth1: Intel(R) PRO/1000 Network Connection [ 2.484731] e1000e 0000:02:00.0 eth1: MAC: 3, PHY: 8, PBA No: 0100FF-0FF [ 2.486345] e1000e 0000:01:00.0 enx002590aee8ac: renamed from eth0 [ 2.487012] e1000e 0000:02:00.0 enx002590aee8ad: renamed from eth1 [ 3.173068] EXT4-fs (dm-0): mounting ext3 file system using the ext4 subsystem [ 3.186754] EXT4-fs (dm-0): mounted filesystem e5cf020c-9d06-40e0-981e-c2f00aa181aa ro with ordered data mode. Quota mode: none. [ 6.807671] EXT4-fs (dm-0): re-mounted e5cf020c-9d06-40e0-981e-c2f00aa181aa r/w. Quota mode: none. [ 8.133077] EXT4-fs (sdb1): mounting ext3 file system using the ext4 subsystem [ 8.156716] EXT4-fs (sdb1): mounted filesystem 67aace68-6428-4f95-ae65-1955c11f595f r/w with ordered data mode. Quota mode: none. [ 8.199310] Adding 1949692k swap on /dev/mapper/pinot0--vg-swap_1. Priority:-2 extents:1 across:1949692k [ 9.627440] xenbr0: port 1(enx002590aee8ac) entered blocking state [ 9.627630] xenbr0: port 1(enx002590aee8ac) entered disabled state [ 9.627773] e1000e 0000:01:00.0 enx002590aee8ac: entered allmulticast mode [ 9.627954] e1000e 0000:01:00.0 enx002590aee8ac: entered promiscuous mode [ 12.706347] e1000e 0000:01:00.0 enx002590aee8ac: NIC Link is Up 1000 Mbps Full Duplex, Flow Control: None [ 12.706930] xenbr0: port 1(enx002590aee8ac) entered blocking state [ 12.707069] xenbr0: port 1(enx002590aee8ac) entered forwarding state