[ 0.000000] Linux version 6.10.0-rc5 (osstest@himrod1) (gcc (Debian 12.2.0-14) 12.2.0, GNU ld (GNU Binutils for Debian) 2.40) #1 SMP PREEMPT_DYNAMIC Mon Jun 24 02:21:20 UTC 2024 [ 0.000000] Command line: placeholder root=/dev/mapper/rimava1--vg-root ro console=hvc0 [ 0.000000] [Firmware Bug]: TSC doesn't count with P0 frequency! [ 0.000000] Released 0 page(s) [ 0.000000] BIOS-provided physical RAM map: [ 0.000000] Xen: [mem 0x0000000000000000-0x0000000000095fff] usable [ 0.000000] Xen: [mem 0x0000000000096000-0x00000000000fffff] reserved [ 0.000000] Xen: [mem 0x0000000000100000-0x0000000020069fff] usable [ 0.000000] Xen: [mem 0x00000000dfe9e000-0x00000000dfe9ffff] type 9 [ 0.000000] Xen: [mem 0x00000000dfea0000-0x00000000dfeb1fff] ACPI data [ 0.000000] Xen: [mem 0x00000000dfeb2000-0x00000000dfedffff] ACPI NVS [ 0.000000] Xen: [mem 0x00000000dfee0000-0x00000000efffffff] reserved [ 0.000000] Xen: [mem 0x00000000fec00000-0x00000000fec00fff] reserved [ 0.000000] Xen: [mem 0x00000000fec20000-0x00000000fec20fff] reserved [ 0.000000] Xen: [mem 0x00000000fee00000-0x00000000feefffff] reserved [ 0.000000] Xen: [mem 0x00000000ffe00000-0x00000000ffffffff] reserved [ 0.000000] Xen: [mem 0x000000fd00000000-0x000000ffffffffff] reserved [ 0.000000] NX (Execute Disable) protection: active [ 0.000000] APIC: Static calls initialized [ 0.000000] SMBIOS 2.6 present. [ 0.000000] DMI: Supermicro H8SCM/H8SCM, BIOS 3.5 11/25/2013 [ 0.000000] DMI: Memory slots populated: 1/4 [ 0.000000] Hypervisor detected: Xen PV [ 0.000013] Xen PV: Detected 6 vCPUS [ 0.037587] tsc: Fast TSC calibration using PIT [ 0.037588] tsc: Detected 3101.179 MHz processor [ 0.037590] tsc: Detected 3101.146 MHz TSC [ 0.037805] e820: update [mem 0x00000000-0x00000fff] usable ==> reserved [ 0.037809] e820: remove [mem 0x000a0000-0x000fffff] usable [ 0.037815] last_pfn = 0x2006a max_arch_pfn = 0x400000000 [ 0.037820] MTRR map: 1 entries (0 fixed + 1 variable; max 16), built from 8 variable MTRRs [ 0.037822] MTRRs set to read-only [ 0.037825] x86/PAT: Configuration [0-7]: WB WT UC- UC WC WP UC UC [ 0.062528] RAMDISK: [mem 0x04000000-0x053b7fff] [ 0.062556] ACPI: Early table checksum verification disabled [ 0.064020] ACPI: RSDP 0x00000000000FA1D0 000024 (v02 ACPIAM) [ 0.064034] ACPI: XSDT 0x00000000DFEA0100 000084 (v01 SMCI 20131125 MSFT 00000097) [ 0.064079] ACPI: FACP 0x00000000DFEA0290 0000F4 (v03 112513 FACP1100 20131125 MSFT 00000097) [ 0.064144] ACPI BIOS Warning (bug): 32/64X length mismatch in FADT/Gpe0Block: 64/32 (20240322/tbfadt-560) [ 0.064156] ACPI: DSDT 0x00000000DFEA0600 005699 (v01 1BA11 1BA11000 00000000 INTL 20051117) [ 0.064168] ACPI: FACS 0x00000000DFEB2000 000040 [ 0.064177] ACPI: FACS 0x00000000DFEB2000 000040 [ 0.064188] ACPI: APIC 0x00000000DFEA0390 0000A4 (v01 112513 APIC1100 20131125 MSFT 00000097) [ 0.064200] ACPI: MCFG 0x00000000DFEA0440 00003C (v01 112513 OEMMCFG 20131125 MSFT 00000097) [ 0.064211] ACPI: OEMB 0x00000000DFEB2040 000075 (v01 112513 OEMB1100 20131125 MSFT 00000097) [ 0.064223] ACPI: HPET 0x00000000DFEAA600 000038 (v01 112513 OEMHPET 20131125 MSFT 00000097) [ 0.064234] ACPI: IVRS 0x00000000DFEAA640 0000B0 (v01 AMD RD890S 00202031 AMD 00000000) [ 0.064244] ACPI: SRAT 0x00000000DFEAA6F0 000108 (v02 AMD AGESA 00000001 AMD 00000001) [ 0.064255] ACPI: SSDT 0x00000000DFEAA800 001158 (v01 A M I POWERNOW 00000001 AMD 00000001) [ 0.064266] ACPI: EINJ 0x00000000DFEAB960 000130 (v01 AMIER AMI_EINJ 20131125 MSFT 00000097) [ 0.064277] ACPI: BERT 0x00000000DFEABAF0 000030 (v01 AMIER AMI_BERT 20131125 MSFT 00000097) [ 0.064287] ACPI: ERST 0x00000000DFEABB20 000210 (v01 AMIER AMI_ERST 20131125 MSFT 00000097) [ 0.064298] ACPI: HEST 0x00000000DFEABD30 0000A8 (v01 AMIER ABC_HEST 20131125 MSFT 00000097) [ 0.064304] ACPI: Reserving FACP table memory at [mem 0xdfea0290-0xdfea0383] [ 0.064306] ACPI: Reserving DSDT table memory at [mem 0xdfea0600-0xdfea5c98] [ 0.064307] ACPI: Reserving FACS table memory at [mem 0xdfeb2000-0xdfeb203f] [ 0.064309] ACPI: Reserving FACS table memory at [mem 0xdfeb2000-0xdfeb203f] [ 0.064310] ACPI: Reserving APIC table memory at [mem 0xdfea0390-0xdfea0433] [ 0.064311] ACPI: Reserving MCFG table memory at [mem 0xdfea0440-0xdfea047b] [ 0.064313] ACPI: Reserving OEMB table memory at [mem 0xdfeb2040-0xdfeb20b4] [ 0.064314] ACPI: Reserving HPET table memory at [mem 0xdfeaa600-0xdfeaa637] [ 0.064315] ACPI: Reserving IVRS table memory at [mem 0xdfeaa640-0xdfeaa6ef] [ 0.064316] ACPI: Reserving SRAT table memory at [mem 0xdfeaa6f0-0xdfeaa7f7] [ 0.064317] ACPI: Reserving SSDT table memory at [mem 0xdfeaa800-0xdfeab957] [ 0.064318] ACPI: Reserving EINJ table memory at [mem 0xdfeab960-0xdfeaba8f] [ 0.064320] ACPI: Reserving BERT table memory at [mem 0xdfeabaf0-0xdfeabb1f] [ 0.064321] ACPI: Reserving ERST table memory at [mem 0xdfeabb20-0xdfeabd2f] [ 0.064322] ACPI: Reserving HEST table memory at [mem 0xdfeabd30-0xdfeabdd7] [ 0.064457] APIC: Switched APIC routing to: Xen PV [ 0.066669] Zone ranges: [ 0.066672] DMA [mem 0x0000000000001000-0x0000000000ffffff] [ 0.066675] DMA32 [mem 0x0000000001000000-0x0000000020069fff] [ 0.066677] Normal empty [ 0.066678] Movable zone start for each node [ 0.066679] Early memory node ranges [ 0.066680] node 0: [mem 0x0000000000001000-0x0000000000095fff] [ 0.066683] node 0: [mem 0x0000000000100000-0x0000000020069fff] [ 0.066685] Initmem setup node 0 [mem 0x0000000000001000-0x0000000020069fff] [ 0.066701] On node 0, zone DMA: 1 pages in unavailable ranges [ 0.066822] On node 0, zone DMA: 106 pages in unavailable ranges [ 0.072509] On node 0, zone DMA32: 32662 pages in unavailable ranges [ 0.072530] p2m virtual area at (____ptrval____), size is 40000000 [ 0.280009] Remapped 106 page(s) [ 0.280531] ACPI: PM-Timer IO Port: 0x808 [ 0.280575] CPU topo: CPU limit of 6 reached. Ignoring further CPUs [ 0.280609] ACPI: LAPIC_NMI (acpi_id[0xff] dfl dfl lint[0x1]) [ 0.280614] ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1]) [ 0.280639] IOAPIC[0]: apic_id 0, version 33, address 0xfec00000, GSI 0-23 [ 0.280648] IOAPIC[1]: apic_id 1, version 33, address 0xfec20000, GSI 24-55 [ 0.280662] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl) [ 0.280669] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 low level) [ 0.280694] ACPI: Using ACPI (MADT) for SMP configuration information [ 0.280699] ACPI: HPET id: 0x8300 base: 0xfed00000 [ 0.280714] CPU topo: Max. logical packages: 1 [ 0.280716] CPU topo: Max. logical dies: 1 [ 0.280717] CPU topo: Max. dies per package: 1 [ 0.280724] CPU topo: Max. threads per core: 1 [ 0.280725] CPU topo: Num. cores per package: 6 [ 0.280726] CPU topo: Num. threads per package: 6 [ 0.280727] CPU topo: Allowing 6 present CPUs plus 0 hotplug CPUs [ 0.280728] CPU topo: Rejected CPUs 2 [ 0.280748] PM: hibernation: Registered nosave memory: [mem 0x00000000-0x00000fff] [ 0.280751] PM: hibernation: Registered nosave memory: [mem 0x00096000-0x000fffff] [ 0.280754] [mem 0x2006a000-0xdfe9dfff] available for PCI devices [ 0.280760] Booting kernel on Xen [ 0.280761] Xen version: 4.19-unstable (preserve-AD) [ 0.280767] clocksource: refined-jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 1910969940391419 ns [ 0.287141] setup_percpu: NR_CPUS:64 nr_cpumask_bits:6 nr_cpu_ids:6 nr_node_ids:1 [ 0.288483] percpu: Embedded 57 pages/cpu s194408 r8192 d30872 u262144 [ 0.288494] pcpu-alloc: s194408 r8192 d30872 u262144 alloc=1*2097152 [ 0.288501] pcpu-alloc: [0] 0 1 2 3 4 5 - - [ 0.288598] xen: PV spinlocks enabled [ 0.288603] PV qspinlock hash table entries: 256 (order: 0, 4096 bytes, linear) [ 0.288608] Kernel command line: placeholder root=/dev/mapper/rimava1--vg-root ro console=hvc0 [ 0.288709] Unknown kernel command line parameters "placeholder", will be passed to user space. [ 0.288777] Dentry cache hash table entries: 65536 (order: 7, 524288 bytes, linear) [ 0.288908] Inode-cache hash table entries: 32768 (order: 6, 262144 bytes, linear) [ 0.289172] Built 1 zonelists, mobility grouping on. Total pages: 131071 [ 0.289178] mem auto-init: stack:all(zero), heap alloc:off, heap free:off [ 0.289182] software IO TLB: area num 8. [ 0.428581] Memory: 385988K/524284K available (16384K kernel code, 2753K rwdata, 6164K rodata, 2680K init, 1864K bss, 138044K reserved, 0K cma-reserved) [ 0.428732] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=6, Nodes=1 [ 0.431866] Dynamic Preempt: voluntary [ 0.432014] rcu: Preemptible hierarchical RCU implementation. [ 0.432016] rcu: RCU event tracing is enabled. [ 0.432017] rcu: RCU restricting CPUs from NR_CPUS=64 to nr_cpu_ids=6. [ 0.432019] Trampoline variant of Tasks RCU enabled. [ 0.432021] rcu: RCU calculated value of scheduler-enlistment delay is 100 jiffies. [ 0.432023] rcu: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=6 [ 0.432051] RCU Tasks: Setting shift to 3 and lim to 1 rcu_task_cb_adjust=1. [ 0.438770] NR_IRQS: 4352, nr_irqs: 1016, preallocated irqs: 16 [ 0.438949] xen:events: Using FIFO-based ABI [ 0.438988] xen: --> pirq=1 -> irq=1 (gsi=1) [ 0.438995] xen: --> pirq=2 -> irq=2 (gsi=2) [ 0.439008] xen: --> pirq=3 -> irq=3 (gsi=3) [ 0.439014] xen: --> pirq=4 -> irq=4 (gsi=4) [ 0.439019] xen: --> pirq=5 -> irq=5 (gsi=5) [ 0.439024] xen: --> pirq=6 -> irq=6 (gsi=6) [ 0.439029] xen: --> pirq=7 -> irq=7 (gsi=7) [ 0.439034] xen: --> pirq=8 -> irq=8 (gsi=8) [ 0.439039] xen: --> pirq=9 -> irq=9 (gsi=9) [ 0.439044] xen: --> pirq=10 -> irq=10 (gsi=10) [ 0.439049] xen: --> pirq=11 -> irq=11 (gsi=11) [ 0.439054] xen: --> pirq=12 -> irq=12 (gsi=12) [ 0.439059] xen: --> pirq=13 -> irq=13 (gsi=13) [ 0.439064] xen: --> pirq=14 -> irq=14 (gsi=14) [ 0.439069] xen: --> pirq=15 -> irq=15 (gsi=15) [ 0.439084] rcu: srcu_init: Setting srcu_struct sizes based on contention. [ 0.445084] Console: colour VGA+ 80x25 [ 0.445090] printk: legacy console [tty0] enabled [ 0.458599] printk: legacy console [hvc0] enabled [ 0.459260] ACPI: Core revision 20240322 [ 0.464987] clocksource: xen: mask: 0xffffffffffffffff max_cycles: 0x1cd42e4dffb, max_idle_ns: 881590591483 ns [ 0.465146] Xen: using vcpuop timer interface [ 0.465153] installing Xen timer for CPU 0 [ 0.465407] clocksource: tsc-early: mask: 0xffffffffffffffff max_cycles: 0x2cb382755bb, max_idle_ns: 440795292849 ns [ 0.465566] Calibrating delay loop (skipped), value calculated using timer frequency.. 6202.29 BogoMIPS (lpj=3101146) [ 0.465793] [Firmware Bug]: CPU 0: APIC ID mismatch. CPUID: 0x0000 APIC: 0x0010 [ 0.466009] Last level iTLB entries: 4KB 512, 2MB 1024, 4MB 512 [ 0.466118] Last level dTLB entries: 4KB 1024, 2MB 1024, 4MB 512, 1GB 0 [ 0.466233] Spectre V1 : Mitigation: usercopy/swapgs barriers and __user pointer sanitization [ 0.466580] Spectre V2 : Mitigation: Retpolines [ 0.466684] Spectre V2 : Spectre v2 / SpectreRSB mitigation: Filling RSB on context switch [ 0.466826] Spectre V2 : Spectre v2 / SpectreRSB : Filling RSB on VMEXIT [ 0.466935] Spectre V2 : Enabling Speculation Barrier for firmware calls [ 0.467046] RETBleed: Mitigation: untrained return thunk [ 0.467193] Spectre V2 : mitigation: Enabling conditional Indirect Branch Prediction Barrier [ 0.467338] Speculative Store Bypass: Vulnerable [ 0.467469] x86/fpu: Supporting XSAVE feature 0x001: 'x87 floating point registers' [ 0.467569] x86/fpu: Supporting XSAVE feature 0x002: 'SSE registers' [ 0.467678] x86/fpu: Supporting XSAVE feature 0x004: 'AVX registers' [ 0.467788] x86/fpu: xstate_offset[2]: 576, xstate_sizes[2]: 256 [ 0.467898] x86/fpu: Enabled xstate features 0x7, context size is 832 bytes, using 'standard' format. [ 0.496420] Freeing SMP alternatives memory: 40K [ 0.496573] pid_max: default: 32768 minimum: 301 [ 0.496736] LSM: initializing lsm=capability,selinux [ 0.496858] SELinux: Initializing. [ 0.497028] Mount-cache hash table entries: 1024 (order: 1, 8192 bytes, linear) [ 0.497176] Mountpoint-cache hash table entries: 1024 (order: 1, 8192 bytes, linear) [ 0.498707] cpu 0 spinlock event irq 57 [ 0.498821] VPMU disabled by hypervisor. [ 0.499310] Performance Events: PMU not available due to virtualization, using software events only. [ 0.499470] signal: max sigframe size: 1776 [ 0.499637] rcu: Hierarchical SRCU implementation. [ 0.499748] rcu: Max phase no-delay instances is 400. [ 0.505814] smp: Bringing up secondary CPUs ... [ 0.506157] installing Xen timer for CPU 1 [ 0.506691] installing Xen timer for CPU 2 [ 0.507096] installing Xen timer for CPU 3 [ 0.507507] installing Xen timer for CPU 4 [ 0.507872] installing Xen timer for CPU 5 [ 0.027472] [Firmware Bug]: CPU 1: APIC ID mismatch. CPUID: 0x0001 APIC: 0x0011 [ 0.508630] cpu 1 spinlock event irq 87 [ 0.027472] [Firmware Bug]: CPU 2: APIC ID mismatch. CPUID: 0x0002 APIC: 0x0012 [ 0.508881] cpu 2 spinlock event irq 88 [ 0.027472] [Firmware Bug]: CPU 3: APIC ID mismatch. CPUID: 0x0003 APIC: 0x0013 [ 0.509823] cpu 3 spinlock event irq 89 [ 0.027472] [Firmware Bug]: CPU 4: APIC ID mismatch. CPUID: 0x0004 APIC: 0x0014 [ 0.510616] cpu 4 spinlock event irq 90 [ 0.027472] [Firmware Bug]: CPU 5: APIC ID mismatch. CPUID: 0x0005 APIC: 0x0015 [ 0.512566] cpu 5 spinlock event irq 91 [ 0.514082] smp: Brought up 1 node, 6 CPUs [ 0.515438] devtmpfs: initialized [ 0.515438] x86/mm: Memory block size: 128MB [ 0.515686] ACPI: PM: Registering ACPI NVS region [mem 0xdfeb2000-0xdfedffff] (188416 bytes) [ 0.515825] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 1911260446275000 ns [ 0.515982] futex hash table entries: 2048 (order: 5, 131072 bytes, linear) [ 0.516566] PM: RTC time: 03:28:46, date: 2024-06-24 [ 0.517018] NET: Registered PF_NETLINK/PF_ROUTE protocol family [ 0.517157] xen:grant_table: Grant tables using version 1 layout [ 0.517327] Grant table initialized [ 0.517734] audit: initializing netlink subsys (disabled) [ 0.518642] audit: type=2000 audit(1719199726.805:1): state=initialized audit_enabled=0 res=1 [ 0.518647] thermal_sys: Registered thermal governor 'step_wise' [ 0.518647] thermal_sys: Registered thermal governor 'user_space' [ 0.519868] PCI: ECAM [mem 0xe0000000-0xefffffff] (base 0xe0000000) for domain 0000 [bus 00-ff] [ 0.519868] PCI: ECAM [mem 0xe0000000-0xefffffff] reserved as E820 entry [ 0.590563] PCI: Using configuration type 1 for base access [ 0.591632] kprobes: kprobe jump-optimization is enabled. All kprobes are optimized if possible. [ 0.593617] ACPI: Added _OSI(Module Device) [ 0.593723] ACPI: Added _OSI(Processor Device) [ 0.593826] ACPI: Added _OSI(3.0 _SCP Extensions) [ 0.593930] ACPI: Added _OSI(Processor Aggregator Device) [ 0.604801] ACPI: 2 ACPI AML tables successfully acquired and loaded [ 0.606456] xen: registering gsi 9 triggering 0 polarity 1 [ 0.610825] ACPI: _OSC evaluation for CPUs failed, trying _PDC [ 0.610867] ACPI: Interpreter enabled [ 0.610999] ACPI: PM: (supports S0 S1 S4 S5) [ 0.611104] ACPI: Using IOAPIC for interrupt routing [ 0.611311] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug [ 0.611497] PCI: Using E820 reservations for host bridge windows [ 0.611738] ACPI: Enabled 4 GPEs in block 00 to 1F [ 0.623642] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff]) [ 0.623767] acpi PNP0A08:00: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI HPX-Type3] [ 0.623924] acpi PNP0A08:00: _OSC: OS requested [PME PCIeCapability LTR] [ 0.624036] acpi PNP0A08:00: _OSC: platform willing to grant [PME PCIeCapability LTR] [ 0.624180] acpi PNP0A08:00: _OSC: platform retains control of PCIe features (AE_NOT_FOUND) [ 0.624655] PCI host bridge to bus 0000:00 [ 0.624758] pci_bus 0000:00: root bus resource [io 0x0000-0x0cf7 window] [ 0.624870] pci_bus 0000:00: root bus resource [io 0x0d00-0xffff window] [ 0.624981] pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff window] [ 0.625130] pci_bus 0000:00: root bus resource [mem 0x000d0000-0x000dffff window] [ 0.625278] pci_bus 0000:00: root bus resource [mem 0xf0000000-0xfebfffff window] [ 0.625422] pci_bus 0000:00: root bus resource [bus 00-ff] [ 0.625582] pci 0000:00:00.0: [1002:5a13] type 00 class 0x060000 conventional PCI endpoint [ 0.626131] pci 0000:00:00.2: [1002:5a23] type 00 class 0x080600 conventional PCI endpoint [ 0.626630] pci 0000:00:09.0: [1002:5a1c] type 01 class 0x060400 PCIe Root Port [ 0.626842] pci 0000:00:09.0: PCI bridge to [bus 01] [ 0.626960] pci 0000:00:09.0: bridge window [io 0xd000-0xdfff] [ 0.627075] pci 0000:00:09.0: bridge window [mem 0xfe900000-0xfe9fffff] [ 0.627235] pci 0000:00:09.0: enabling Extended Tags [ 0.627455] pci 0000:00:09.0: PME# supported from D0 D3hot D3cold [ 0.627742] pci 0000:00:0a.0: [1002:5a1d] type 01 class 0x060400 PCIe Root Port [ 0.627960] pci 0000:00:0a.0: PCI bridge to [bus 02] [ 0.628077] pci 0000:00:0a.0: bridge window [io 0xe000-0xefff] [ 0.628191] pci 0000:00:0a.0: bridge window [mem 0xfea00000-0xfeafffff] [ 0.628351] pci 0000:00:0a.0: enabling Extended Tags [ 0.628567] pci 0000:00:0a.0: PME# supported from D0 D3hot D3cold [ 0.628866] pci 0000:00:11.0: [1002:4391] type 00 class 0x010601 conventional PCI endpoint [ 0.629053] pci 0000:00:11.0: BAR 0 [io 0xc000-0xc007] [ 0.629181] pci 0000:00:11.0: BAR 1 [io 0xb000-0xb003] [ 0.629315] pci 0000:00:11.0: BAR 2 [io 0xa000-0xa007] [ 0.629443] pci 0000:00:11.0: BAR 3 [io 0x9000-0x9003] [ 0.629573] pci 0000:00:11.0: BAR 4 [io 0x8000-0x800f] [ 0.629700] pci 0000:00:11.0: BAR 5 [mem 0xfebfbc00-0xfebfbfff] [ 0.630048] pci 0000:00:12.0: [1002:4397] type 00 class 0x0c0310 conventional PCI endpoint [ 0.630235] pci 0000:00:12.0: BAR 0 [mem 0xfebf9000-0xfebf9fff] [ 0.630634] pci 0000:00:12.1: [1002:4398] type 00 class 0x0c0310 conventional PCI endpoint [ 0.630820] pci 0000:00:12.1: BAR 0 [mem 0xfebfa000-0xfebfafff] [ 0.631217] pci 0000:00:12.2: [1002:4396] type 00 class 0x0c0320 conventional PCI endpoint [ 0.631408] pci 0000:00:12.2: BAR 0 [mem 0xfebfb800-0xfebfb8ff] [ 0.631408] pci 0000:00:12.2: supports D1 D2 [ 0.631408] pci 0000:00:12.2: PME# supported from D0 D1 D2 D3hot [ 0.631408] pci 0000:00:13.0: [1002:4397] type 00 class 0x0c0310 conventional PCI endpoint [ 0.631408] pci 0000:00:13.0: BAR 0 [mem 0xfebf7000-0xfebf7fff] [ 0.631563] pci 0000:00:13.1: [1002:4398] type 00 class 0x0c0310 conventional PCI endpoint [ 0.631563] pci 0000:00:13.1: BAR 0 [mem 0xfebf8000-0xfebf8fff] [ 0.631563] pci 0000:00:13.2: [1002:4396] type 00 class 0x0c0320 conventional PCI endpoint [ 0.631563] pci 0000:00:13.2: BAR 0 [mem 0xfebfb400-0xfebfb4ff] [ 0.632782] pci 0000:00:13.2: supports D1 D2 [ 0.632888] pci 0000:00:13.2: PME# supported from D0 D1 D2 D3hot [ 0.633165] pci 0000:00:14.0: [1002:4385] type 00 class 0x0c0500 conventional PCI endpoint [ 0.633676] pci 0000:00:14.1: [1002:439c] type 00 class 0x01018a conventional PCI endpoint [ 0.633863] pci 0000:00:14.1: BAR 0 [io 0x0000-0x0007] [ 0.633991] pci 0000:00:14.1: BAR 1 [io 0x0000-0x0003] [ 0.634119] pci 0000:00:14.1: BAR 2 [io 0x0000-0x0007] [ 0.634247] pci 0000:00:14.1: BAR 3 [io 0x0000-0x0003] [ 0.634375] pci 0000:00:14.1: BAR 4 [io 0xff00-0xff0f] [ 0.634533] pci 0000:00:14.1: BAR 0 [io 0x01f0-0x01f7]: legacy IDE quirk [ 0.634566] pci 0000:00:14.1: BAR 1 [io 0x03f6]: legacy IDE quirk [ 0.634675] pci 0000:00:14.1: BAR 2 [io 0x0170-0x0177]: legacy IDE quirk [ 0.634786] pci 0000:00:14.1: BAR 3 [io 0x0376]: legacy IDE quirk [ 0.635091] pci 0000:00:14.3: [1002:439d] type 00 class 0x060100 conventional PCI endpoint [ 0.635570] pci 0000:00:14.4: [1002:4384] type 01 class 0x060401 conventional PCI bridge [ 0.635799] pci 0000:00:14.4: PCI bridge to [bus 03] (subtractive decode) [ 0.635927] pci 0000:00:14.4: bridge window [mem 0xfdf00000-0xfe7fffff] [ 0.636048] pci 0000:00:14.4: bridge window [mem 0xfc000000-0xfcffffff pref] [ 0.636329] pci 0000:00:14.5: [1002:4399] type 00 class 0x0c0310 conventional PCI endpoint [ 0.636526] pci 0000:00:14.5: BAR 0 [mem 0xfebf6000-0xfebf6fff] [ 0.636850] pci 0000:00:18.0: [1022:1600] type 00 class 0x060000 conventional PCI endpoint [ 0.637227] pci 0000:00:18.1: [1022:1601] type 00 class 0x060000 conventional PCI endpoint [ 0.637535] pci 0000:00:18.2: [1022:1602] type 00 class 0x060000 conventional PCI endpoint [ 0.638732] pci 0000:00:18.3: [1022:1603] type 00 class 0x060000 conventional PCI endpoint [ 0.639093] pci 0000:00:18.4: [1022:1604] type 00 class 0x060000 conventional PCI endpoint [ 0.639448] pci 0000:00:18.5: [1022:1605] type 00 class 0x060000 conventional PCI endpoint [ 0.639895] pci 0000:01:00.0: [8086:10d3] type 00 class 0x020000 PCIe Endpoint [ 0.640088] pci 0000:01:00.0: BAR 0 [mem 0xfe9e0000-0xfe9fffff] [ 0.640252] pci 0000:01:00.0: BAR 2 [io 0xd800-0xd81f] [ 0.640385] pci 0000:01:00.0: BAR 3 [mem 0xfe9dc000-0xfe9dffff] [ 0.640385] pci 0000:01:00.0: PME# supported from D0 D3hot D3cold [ 0.643641] pci 0000:00:09.0: PCI bridge to [bus 01] [ 0.644038] pci 0000:02:00.0: [8086:10d3] type 00 class 0x020000 PCIe Endpoint [ 0.644244] pci 0000:02:00.0: BAR 0 [mem 0xfeae0000-0xfeafffff] [ 0.644407] pci 0000:02:00.0: BAR 2 [io 0xe800-0xe81f] [ 0.644540] pci 0000:02:00.0: BAR 3 [mem 0xfeadc000-0xfeadffff] [ 0.644843] pci 0000:02:00.0: PME# supported from D0 D3hot D3cold [ 0.648661] pci 0000:00:0a.0: PCI bridge to [bus 02] [ 0.648866] pci_bus 0000:03: extended config space not accessible [ 0.649072] pci 0000:03:04.0: [102b:0532] type 00 class 0x030000 conventional PCI endpoint [ 0.649271] pci 0000:03:04.0: BAR 0 [mem 0xfc000000-0xfcffffff pref] [ 0.649452] pci 0000:03:04.0: BAR 1 [mem 0xfdffc000-0xfdffffff] [ 0.651592] pci 0000:03:04.0: BAR 2 [mem 0xfe000000-0xfe7fffff] [ 0.651846] pci 0000:03:04.0: Video device with shadowed ROM at [mem 0x000c0000-0x000dffff] [ 0.652293] pci 0000:00:14.4: PCI bridge to [bus 03] (subtractive decode) [ 0.652428] pci 0000:00:14.4: bridge window [io 0x0000-0x0cf7 window] (subtractive decode) [ 0.652567] pci 0000:00:14.4: bridge window [io 0x0d00-0xffff window] (subtractive decode) [ 0.652714] pci 0000:00:14.4: bridge window [mem 0x000a0000-0x000bffff window] (subtractive decode) [ 0.652905] pci 0000:00:14.4: bridge window [mem 0x000d0000-0x000dffff window] (subtractive decode) [ 0.653053] pci 0000:00:14.4: bridge window [mem 0xf0000000-0xfebfffff window] (subtractive decode) [ 0.653270] pci_bus 0000:00: on NUMA node 0 [ 0.653946] xen: registering gsi 13 triggering 1 polarity 0 [ 0.654434] ACPI: PCI: Interrupt link LNKA configured for IRQ 10 [ 0.654631] ACPI: PCI: Interrupt link LNKB configured for IRQ 11 [ 0.654823] ACPI: PCI: Interrupt link LNKC configured for IRQ 10 [ 0.655016] ACPI: PCI: Interrupt link LNKD configured for IRQ 10 [ 0.655208] ACPI: PCI: Interrupt link LNKE configured for IRQ 7 [ 0.655399] ACPI: PCI: Interrupt link LNKF configured for IRQ 10 [ 0.655633] ACPI: PCI: Interrupt link LNKG configured for IRQ 11 [ 0.655835] ACPI: PCI: Interrupt link LNKH configured for IRQ 10 [ 0.656094] xen:balloon: Initialising balloon driver [ 0.657014] iommu: Default domain type: Translated [ 0.657370] iommu: DMA domain TLB invalidation policy: lazy mode [ 0.658167] SCSI subsystem initialized [ 0.658682] libata version 3.00 loaded. [ 0.658920] ACPI: bus type USB registered [ 0.659403] usbcore: registered new interface driver usbfs [ 0.659654] usbcore: registered new interface driver hub [ 0.660089] usbcore: registered new device driver usb [ 0.660538] pps_core: LinuxPPS API ver. 1 registered [ 0.661567] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti [ 0.661715] PTP clock support registered [ 0.661859] Advanced Linux Sound Architecture Driver Initialized. [ 0.662947] NetLabel: Initializing [ 0.663060] NetLabel: domain hash size = 128 [ 0.663176] NetLabel: protocols = UNLABELED CIPSOv4 CALIPSO [ 0.663325] NetLabel: unlabeled traffic allowed by default [ 0.663584] PCI: Using ACPI for IRQ routing [ 0.689900] PCI: pci_cache_line_size set to 64 bytes [ 0.690107] e820: reserve RAM buffer [mem 0x00096000-0x0009ffff] [ 0.690114] e820: reserve RAM buffer [mem 0x2006a000-0x23ffffff] [ 0.690752] pci 0000:03:04.0: vgaarb: setting as boot VGA device [ 0.691083] pci 0000:03:04.0: vgaarb: bridge control possible [ 0.691533] pci 0000:03:04.0: vgaarb: VGA device added: decodes=io+mem,owns=io+mem,locks=none [ 0.691567] vgaarb: loaded [ 0.694818] clocksource: Switched to clocksource tsc-early [ 0.695862] VFS: Disk quotas dquot_6.6.0 [ 0.696360] VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes) [ 0.696742] hugetlbfs: disabling because there are no supported hugepage sizes [ 0.696915] pnp: PnP ACPI init [ 0.697401] system 00:00: [mem 0xfec20000-0xfec200ff] could not be reserved [ 0.697738] system 00:01: [mem 0xf6000000-0xf6003fff] has been reserved [ 0.698306] xen: registering gsi 8 triggering 1 polarity 0 [ 0.698653] system 00:03: [io 0x0a10-0x0a1f] has been reserved [ 0.699019] system 00:04: [mem 0xfec00000-0xfec00fff] could not be reserved [ 0.699133] system 00:04: [mem 0xfee00000-0xfee00fff] has been reserved [ 0.699742] system 00:05: [io 0x0ca2-0x0ca3] has been reserved [ 0.699856] system 00:05: [io 0x0550-0x0551] has been reserved [ 0.699966] system 00:05: [io 0x04d0-0x04d1] has been reserved [ 0.700075] system 00:05: [io 0x040b] has been reserved [ 0.700181] system 00:05: [io 0x04d6] has been reserved [ 0.700288] system 00:05: [io 0x0c00-0x0c01] has been reserved [ 0.700397] system 00:05: [io 0x0c14] has been reserved [ 0.700503] system 00:05: [io 0x0c50-0x0c51] has been reserved [ 0.700625] system 00:05: [io 0x0c52] has been reserved [ 0.700734] system 00:05: [io 0x0c6c] has been reserved [ 0.700840] system 00:05: [io 0x0c6f] has been reserved [ 0.700946] system 00:05: [io 0x0cd0-0x0cd1] has been reserved [ 0.701059] system 00:05: [io 0x0cd2-0x0cd3] has been reserved [ 0.701179] system 00:05: [io 0x0cd4-0x0cd5] has been reserved [ 0.701288] system 00:05: [io 0x0cd6-0x0cd7] has been reserved [ 0.701397] system 00:05: [io 0x0cd8-0x0cdf] has been reserved [ 0.701506] system 00:05: [io 0x0800-0x089f] has been reserved [ 0.701627] system 00:05: [io 0x0b00-0x0b0f] has been reserved [ 0.701737] system 00:05: [io 0x0b20-0x0b3f] has been reserved [ 0.701845] system 00:05: [io 0x0900-0x090f] has been reserved [ 0.701954] system 00:05: [io 0x0910-0x091f] has been reserved [ 0.702064] system 00:05: [io 0xfe00-0xfefe] has been reserved [ 0.702173] system 00:05: [mem 0xffb80000-0xffbfffff] has been reserved [ 0.702284] system 00:05: [mem 0xfec10000-0xfec1001f] has been reserved [ 0.702395] system 00:05: [mem 0xffe50000-0xffe5e05f] has been reserved [ 0.703661] xen: registering gsi 4 triggering 1 polarity 0 [ 0.703666] Already setup the GSI :4 [ 0.703768] pnp 00:06: [dma 0 disabled] [ 0.704087] xen: registering gsi 3 triggering 1 polarity 0 [ 0.704094] pnp 00:07: [dma 0 disabled] [ 0.704277] system 00:08: [mem 0xe0000000-0xefffffff] has been reserved [ 0.705239] pnp 00:09: disabling [mem 0x000c0000-0x000cffff] because it overlaps 0000:03:04.0 BAR 6 [mem 0x000c0000-0x000dffff] [ 0.705751] system 00:09: [mem 0x00000000-0x0009ffff] could not be reserved [ 0.705865] system 00:09: [mem 0x000e0000-0x000fffff] could not be reserved [ 0.705976] system 00:09: [mem 0x00100000-0xdfffffff] could not be reserved [ 0.706089] system 00:09: [mem 0xfec00000-0xffffffff] could not be reserved [ 0.706393] pnp: PnP ACPI: found 10 devices [ 0.736537] PM-Timer failed consistency check (0xffffff) - aborting. [ 0.736983] NET: Registered PF_INET protocol family [ 0.737704] IP idents hash table entries: 8192 (order: 4, 65536 bytes, linear) [ 0.738194] tcp_listen_portaddr_hash hash table entries: 256 (order: 0, 4096 bytes, linear) [ 0.738346] Table-perturb hash table entries: 65536 (order: 6, 262144 bytes, linear) [ 0.738507] TCP established hash table entries: 4096 (order: 3, 32768 bytes, linear) [ 0.738932] TCP bind hash table entries: 4096 (order: 5, 131072 bytes, linear) [ 0.739487] TCP: Hash tables configured (established 4096 bind 4096) [ 0.739868] UDP hash table entries: 256 (order: 1, 8192 bytes, linear) [ 0.739990] UDP-Lite hash table entries: 256 (order: 1, 8192 bytes, linear) [ 0.740172] NET: Registered PF_UNIX/PF_LOCAL protocol family [ 0.741374] RPC: Registered named UNIX socket transport module. [ 0.741694] RPC: Registered udp transport module. [ 0.741798] RPC: Registered tcp transport module. [ 0.741902] RPC: Registered tcp-with-tls transport module. [ 0.742009] RPC: Registered tcp NFSv4.1 backchannel transport module. [ 0.742885] pci 0000:00:09.0: PCI bridge to [bus 01] [ 0.743031] pci 0000:00:09.0: bridge window [io 0xd000-0xdfff] [ 0.743153] pci 0000:00:09.0: bridge window [mem 0xfe900000-0xfe9fffff] [ 0.743286] pci 0000:00:0a.0: PCI bridge to [bus 02] [ 0.743396] pci 0000:00:0a.0: bridge window [io 0xe000-0xefff] [ 0.743516] pci 0000:00:0a.0: bridge window [mem 0xfea00000-0xfeafffff] [ 0.743687] pci 0000:00:14.4: PCI bridge to [bus 03] [ 0.743822] pci 0000:00:14.4: bridge window [mem 0xfdf00000-0xfe7fffff] [ 0.743978] pci 0000:00:14.4: bridge window [mem 0xfc000000-0xfcffffff pref] [ 0.744138] pci_bus 0000:00: resource 4 [io 0x0000-0x0cf7 window] [ 0.744250] pci_bus 0000:00: resource 5 [io 0x0d00-0xffff window] [ 0.744361] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff window] [ 0.744473] pci_bus 0000:00: resource 7 [mem 0x000d0000-0x000dffff window] [ 0.744632] pci_bus 0000:00: resource 8 [mem 0xf0000000-0xfebfffff window] [ 0.744966] pci_bus 0000:01: resource 0 [io 0xd000-0xdfff] [ 0.745462] pci_bus 0000:01: resource 1 [mem 0xfe900000-0xfe9fffff] [ 0.745684] pci_bus 0000:02: resource 0 [io 0xe000-0xefff] [ 0.745792] pci_bus 0000:02: resource 1 [mem 0xfea00000-0xfeafffff] [ 0.745900] pci_bus 0000:03: resource 1 [mem 0xfdf00000-0xfe7fffff] [ 0.746008] pci_bus 0000:03: resource 2 [mem 0xfc000000-0xfcffffff pref] [ 0.746119] pci_bus 0000:03: resource 4 [io 0x0000-0x0cf7 window] [ 0.746228] pci_bus 0000:03: resource 5 [io 0x0d00-0xffff window] [ 0.746337] pci_bus 0000:03: resource 6 [mem 0x000a0000-0x000bffff window] [ 0.746448] pci_bus 0000:03: resource 7 [mem 0x000d0000-0x000dffff window] [ 0.746561] pci_bus 0000:03: resource 8 [mem 0xf0000000-0xfebfffff window] [ 0.747012] xen: registering gsi 16 triggering 0 polarity 1 [ 0.747099] xen: --> pirq=16 -> irq=16 (gsi=16) [ 1.396822] pci 0000:00:12.0: quirk_usb_early_handoff+0x0/0x7c0 took 634720 usecs [ 1.397067] xen: registering gsi 16 triggering 0 polarity 1 [ 1.397085] Already setup the GSI :16 [ 1.421887] pci 0000:00:12.1: quirk_usb_early_handoff+0x0/0x7c0 took 24292 usecs [ 1.422152] xen: registering gsi 17 triggering 0 polarity 1 [ 1.422232] xen: --> pirq=17 -> irq=17 (gsi=17) [ 1.422454] xen: registering gsi 18 triggering 0 polarity 1 [ 1.422473] xen: --> pirq=18 -> irq=18 (gsi=18) [ 1.447549] pci 0000:00:13.0: quirk_usb_early_handoff+0x0/0x7c0 took 24555 usecs [ 1.447822] xen: registering gsi 18 triggering 0 polarity 1 [ 1.447836] Already setup the GSI :18 [ 1.472837] pci 0000:00:13.1: quirk_usb_early_handoff+0x0/0x7c0 took 24487 usecs [ 1.473092] xen: registering gsi 19 triggering 0 polarity 1 [ 1.473176] xen: --> pirq=19 -> irq=19 (gsi=19) [ 1.473387] xen: registering gsi 18 triggering 0 polarity 1 [ 1.473390] Already setup the GSI :18 [ 1.497860] pci 0000:00:14.5: quirk_usb_early_handoff+0x0/0x7c0 took 23949 usecs [ 1.498103] PCI: CLS 64 bytes, default 64 [ 1.498256] PCI-DMA: Using software bounce buffering for IO (SWIOTLB) [ 1.498500] software IO TLB: mapped [mem 0x000000001b200000-0x000000001f200000] (64MB) [ 1.498650] Unpacking initramfs... [ 1.498844] kvm_intel: VMX not supported by CPU 3 [ 1.498983] kvm_amd: SVM not supported by CPU 3 [ 1.499099] clocksource: tsc: mask: 0xffffffffffffffff max_cycles: 0x2cb382755bb, max_idle_ns: 440795292849 ns [ 1.499658] clocksource: Switched to clocksource tsc [ 1.529824] Initialise system trusted keyrings [ 1.530551] workingset: timestamp_bits=62 max_order=17 bucket_order=0 [ 1.531214] NFS: Registering the id_resolver key type [ 1.531336] Key type id_resolver registered [ 1.531438] Key type id_legacy registered [ 1.531721] 9p: Installing v9fs 9p2000 file system support [ 1.548633] Key type asymmetric registered [ 1.548741] Asymmetric key parser 'x509' registered [ 1.548877] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 251) [ 1.549040] io scheduler mq-deadline registered [ 1.549146] io scheduler kyber registered [ 1.549906] xen: registering gsi 53 triggering 0 polarity 1 [ 1.549965] xen: --> pirq=53 -> irq=53 (gsi=53) [ 1.550277] xen: registering gsi 54 triggering 0 polarity 1 [ 1.550297] xen: --> pirq=54 -> irq=54 (gsi=54) [ 1.550746] input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input0 [ 1.550939] ACPI: button: Power Button [PWRB] [ 1.551087] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input1 [ 1.551391] ACPI: button: Power Button [PWRF] [ 1.554272] ACPI: \_PR_.P001: Found 2 idle states [ 1.554602] ACPI: \_PR_.P002: Found 2 idle states [ 1.556296] ACPI: \_PR_.P003: Found 2 idle states [ 1.556471] ACPI: \_PR_.P004: Found 2 idle states [ 1.556630] ACPI: \_PR_.P005: Found 2 idle states [ 1.556795] ACPI: \_PR_.P006: Found 2 idle states [ 1.558054] xen:xen_evtchn: Event-channel device installed [ 1.558327] xen_pciback: backend is vpci [ 1.559431] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled [ 1.559974] 00:07: ttyS1 at I/O 0x2f8 (irq = 3, base_baud = 115200) is a 16550A [ 1.560856] hpet_acpi_add: no address or irqs in _CRS [ 1.561032] Non-volatile memory driver v1.3 [ 1.564863] loop: module loaded [ 1.578454] ahci 0000:00:11.0: version 3.0 [ 1.578659] xen: registering gsi 22 triggering 0 polarity 1 [ 1.578706] xen: --> pirq=22 -> irq=22 (gsi=22) [ 1.578902] ahci 0000:00:11.0: AHCI vers 0001.0100, 32 command slots, 3 Gbps, SATA mode [ 1.579112] ahci 0000:00:11.0: 4/4 ports implemented (port mask 0xf) [ 1.579236] ahci 0000:00:11.0: flags: 64bit ncq sntf ilck pm led clo pmp pio slum part ccc [ 1.580950] scsi host0: ahci [ 1.581532] scsi host1: ahci [ 1.581995] scsi host2: ahci [ 1.582465] scsi host3: ahci [ 1.582676] ata1: SATA max UDMA/133 abar m1024@0xfebfbc00 port 0xfebfbd00 irq 22 lpm-pol 0 [ 1.582826] ata2: SATA max UDMA/133 abar m1024@0xfebfbc00 port 0xfebfbd80 irq 22 lpm-pol 0 [ 1.582975] ata3: SATA max UDMA/133 abar m1024@0xfebfbc00 port 0xfebfbe00 irq 22 lpm-pol 0 [ 1.583126] ata4: SATA max UDMA/133 abar m1024@0xfebfbc00 port 0xfebfbe80 irq 22 lpm-pol 0 [ 1.583778] tun: Universal TUN/TAP device driver, 1.6 [ 1.584030] e100: Intel(R) PRO/100 Network Driver [ 1.584136] e100: Copyright(c) 1999-2006 Intel Corporation [ 1.584259] sky2: driver version 1.30 [ 1.584423] xen_netfront: Initialising Xen virtual ethernet driver [ 1.585017] xen: registering gsi 16 triggering 0 polarity 1 [ 1.585033] Already setup the GSI :16 [ 1.585199] ohci-pci 0000:00:12.0: OHCI PCI host controller [ 1.585431] ohci-pci 0000:00:12.0: new USB bus registered, assigned bus number 1 [ 1.585703] ohci-pci 0000:00:12.0: irq 16, io mem 0xfebf9000 [ 1.585731] xen: registering gsi 17 triggering 0 polarity 1 [ 1.585838] Already setup the GSI :17 [ 1.585861] xen: registering gsi 19 triggering 0 polarity 1 [ 1.585992] Already setup the GSI :19 [ 1.642466] usb usb1: New USB device found, idVendor=1d6b, idProduct=0001, bcdDevice= 6.10 [ 1.642711] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 1.642853] usb usb1: Product: OHCI PCI host controller [ 1.642959] usb usb1: Manufacturer: Linux 6.10.0-rc5 ohci_hcd [ 1.643069] usb usb1: SerialNumber: 0000:00:12.0 [ 1.644029] hub 1-0:1.0: USB hub found [ 1.644233] hub 1-0:1.0: 3 ports detected [ 1.644896] xen: registering gsi 16 triggering 0 polarity 1 [ 1.644913] Already setup the GSI :16 [ 1.644966] ehci-pci 0000:00:12.2: EHCI Host Controller [ 1.645510] ehci-pci 0000:00:12.2: new USB bus registered, assigned bus number 2 [ 1.645675] ehci-pci 0000:00:12.2: applying AMD SB700/SB800/Hudson-2/3 EHCI dummy qh workaround [ 1.645847] ehci-pci 0000:00:12.2: debug port 1 [ 1.646135] ehci-pci 0000:00:12.2: irq 17, io mem 0xfebfb800 [ 1.652549] ehci-pci 0000:00:12.2: USB 2.0 started, EHCI 1.00 [ 1.652764] usb usb2: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 6.10 [ 1.652912] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 1.653055] usb usb2: Product: EHCI Host Controller [ 1.653159] usb usb2: Manufacturer: Linux 6.10.0-rc5 ehci_hcd [ 1.653269] usb usb2: SerialNumber: 0000:00:12.2 [ 1.653700] hub 2-0:1.0: USB hub found [ 1.653853] hub 2-0:1.0: 6 ports detected [ 1.705709] hub 1-0:1.0: USB hub found [ 1.705870] hub 1-0:1.0: 3 ports detected [ 1.706223] ehci-pci 0000:00:13.2: EHCI Host Controller [ 1.706739] ehci-pci 0000:00:13.2: new USB bus registered, assigned bus number 3 [ 1.706893] ehci-pci 0000:00:13.2: applying AMD SB700/SB800/Hudson-2/3 EHCI dummy qh workaround [ 1.707068] ehci-pci 0000:00:13.2: debug port 1 [ 1.707370] ehci-pci 0000:00:13.2: irq 19, io mem 0xfebfb400 [ 1.713523] ehci-pci 0000:00:13.2: USB 2.0 started, EHCI 1.00 [ 1.713973] usb usb3: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 6.10 [ 1.714157] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 1.714299] usb usb3: Product: EHCI Host Controller [ 1.714407] usb usb3: Manufacturer: Linux 6.10.0-rc5 ehci_hcd [ 1.714538] usb usb3: SerialNumber: 0000:00:13.2 [ 1.715057] hub 3-0:1.0: USB hub found [ 1.715200] hub 3-0:1.0: 6 ports detected [ 1.715794] ohci-pci 0000:00:12.1: OHCI PCI host controller [ 1.716077] ohci-pci 0000:00:12.1: new USB bus registered, assigned bus number 4 [ 1.716288] ohci-pci 0000:00:12.1: irq 16, io mem 0xfebfa000 [ 1.771996] usb usb4: New USB device found, idVendor=1d6b, idProduct=0001, bcdDevice= 6.10 [ 1.772186] usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 1.772328] usb usb4: Product: OHCI PCI host controller [ 1.772442] usb usb4: Manufacturer: Linux 6.10.0-rc5 ohci_hcd [ 1.772572] usb usb4: SerialNumber: 0000:00:12.1 [ 1.773090] hub 4-0:1.0: USB hub found [ 1.773267] hub 4-0:1.0: 3 ports detected [ 1.773942] xen: registering gsi 18 triggering 0 polarity 1 [ 1.773955] Already setup the GSI :18 [ 1.774133] ohci-pci 0000:00:13.0: OHCI PCI host controller [ 1.774390] ohci-pci 0000:00:13.0: new USB bus registered, assigned bus number 5 [ 1.774648] ohci-pci 0000:00:13.0: irq 18, io mem 0xfebf7000 [ 1.831038] usb usb5: New USB device found, idVendor=1d6b, idProduct=0001, bcdDevice= 6.10 [ 1.831237] usb usb5: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 1.831385] usb usb5: Product: OHCI PCI host controller [ 1.831521] usb usb5: Manufacturer: Linux 6.10.0-rc5 ohci_hcd [ 1.831635] usb usb5: SerialNumber: 0000:00:13.0 [ 1.832733] hub 5-0:1.0: USB hub found [ 1.833069] hub 5-0:1.0: 3 ports detected [ 1.834278] xen: registering gsi 18 triggering 0 polarity 1 [ 1.834301] Already setup the GSI :18 [ 1.834526] ohci-pci 0000:00:13.1: OHCI PCI host controller [ 1.834965] ohci-pci 0000:00:13.1: new USB bus registered, assigned bus number 6 [ 1.835230] ohci-pci 0000:00:13.1: irq 18, io mem 0xfebf8000 [ 1.843960] Freeing initrd memory: 20192K [ 1.889353] ata4: SATA link down (SStatus 0 SControl 300) [ 1.890300] ata3: SATA link down (SStatus 0 SControl 300) [ 1.890929] usb usb6: New USB device found, idVendor=1d6b, idProduct=0001, bcdDevice= 6.10 [ 1.891084] usb usb6: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 1.891224] usb usb6: Product: OHCI PCI host controller [ 1.891335] usb usb6: Manufacturer: Linux 6.10.0-rc5 ohci_hcd [ 1.891457] usb usb6: SerialNumber: 0000:00:13.1 [ 1.891925] hub 6-0:1.0: USB hub found [ 1.892041] hub 6-0:1.0: 3 ports detected [ 1.892593] xen: registering gsi 18 triggering 0 polarity 1 [ 1.892607] Already setup the GSI :18 [ 1.892785] ohci-pci 0000:00:14.5: OHCI PCI host controller [ 1.893009] ohci-pci 0000:00:14.5: new USB bus registered, assigned bus number 7 [ 1.893250] ohci-pci 0000:00:14.5: irq 18, io mem 0xfebf6000 [ 1.948817] usb usb7: New USB device found, idVendor=1d6b, idProduct=0001, bcdDevice= 6.10 [ 1.949000] usb usb7: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 1.949141] usb usb7: Product: OHCI PCI host controller [ 1.949250] usb usb7: Manufacturer: Linux 6.10.0-rc5 ohci_hcd [ 1.949357] usb usb7: SerialNumber: 0000:00:14.5 [ 1.949862] hub 7-0:1.0: USB hub found [ 1.950030] hub 7-0:1.0: 2 ports detected [ 1.950522] usbcore: registered new interface driver usblp [ 1.950656] usbcore: registered new interface driver usb-storage [ 1.950817] i8042: PNP: No PS/2 controller found. [ 1.950921] i8042: Probing ports directly. [ 1.953969] serio: i8042 KBD port at 0x60,0x64 irq 1 [ 1.954087] serio: i8042 AUX port at 0x60,0x64 irq 12 [ 1.954903] rtc_cmos 00:02: RTC can wake from S4 [ 1.955554] rtc_cmos 00:02: registered as rtc0 [ 1.955707] rtc_cmos 00:02: alarms up to one month, y3k, 114 bytes nvram [ 1.955894] device-mapper: uevent: version 1.0.3 [ 1.956253] device-mapper: ioctl: 4.48.0-ioctl (2023-03-01) initialised: dm-devel@lists.linux.dev [ 1.956409] amd_pstate: the _CPC object is not present in SBIOS or ACPI disabled [ 1.956582] hid: raw HID events driver (C) Jiri Kosina [ 1.956961] usbcore: registered new interface driver usbhid [ 1.957069] usbhid: USB HID core driver [ 1.957920] Initializing XFRM netlink socket [ 1.958088] NET: Registered PF_INET6 protocol family [ 1.959279] Segment Routing with IPv6 [ 1.959434] In-situ OAM (IOAM) with IPv6 [ 1.959625] sit: IPv6, IPv4 and MPLS over IPv4 tunneling driver [ 1.959961] NET: Registered PF_PACKET protocol family [ 1.960139] 9pnet: Installing 9P2000 support [ 1.960298] Key type dns_resolver registered [ 1.960422] x86/pm: family 0x15 cpu detected, MSR saving is needed during suspending. [ 1.961529] IPI shorthand broadcast: enabled [ 1.966089] sched_clock: Marking stable (1939004322, 26472674)->(1976068901, -10591905) [ 1.966745] Timer migration: 1 hierarchy levels; 8 children per group; 1 crossnode level [ 1.967222] registered taskstats version 1 [ 1.967326] Loading compiled-in X.509 certificates [ 1.969730] PM: Magic number: 12:46:463 [ 1.971488] printk: legacy console [netcon0] enabled [ 1.971594] netconsole: network logging started [ 1.971913] cfg80211: Loading compiled-in X.509 certificates for regulatory database [ 2.011818] Loaded X.509 cert 'sforshee: 00b28ddf47aef9cea7' [ 2.012856] Loaded X.509 cert 'wens: 61c038651aabdcf94bd0ac7ff06c7248db18c600' [ 2.013066] ALSA device list: [ 2.013441] No soundcards found. [ 2.015242] cfg80211: loaded regulatory.db is malformed or signature is missing/invalid [ 2.050739] ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300) [ 2.051170] ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300) [ 2.052605] ata1.00: ATA-8: WDC WD1003FBYZ-010FB0, 01.01V03, max UDMA/133 [ 2.053278] ata1.00: 1953525168 sectors, multi 0: LBA48 NCQ (depth 32), AA [ 2.054617] ata2.00: ATAPI: ATAPI iHAS124 E, 4L07, max UDMA/100 [ 2.055226] ata1.00: configured for UDMA/133 [ 2.055900] ata2.00: configured for UDMA/100 [ 2.056215] scsi 0:0:0:0: Direct-Access ATA WDC WD1003FBYZ-0 1V03 PQ: 0 ANSI: 5 [ 2.057006] sd 0:0:0:0: Attached scsi generic sg0 type 0 [ 2.057364] sd 0:0:0:0: [sda] 1953525168 512-byte logical blocks: (1.00 TB/932 GiB) [ 2.057542] sd 0:0:0:0: [sda] Write Protect is off [ 2.057708] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00 [ 2.057733] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 2.057922] sd 0:0:0:0: [sda] Preferred minimum I/O size 512 bytes [ 2.058064] scsi 1:0:0:0: CD-ROM ATAPI iHAS124 E 4L07 PQ: 0 ANSI: 5 [ 2.087341] sda: sda1 sda2 < sda5 > [ 2.088283] sd 0:0:0:0: [sda] Attached SCSI disk [ 2.097646] sr 1:0:0:0: [sr0] scsi3-mmc drive: 48x/48x writer dvd-ram cd/rw xa/form2 cdda tray [ 2.097843] cdrom: Uniform CD-ROM driver Revision: 3.20 [ 2.114430] sr 1:0:0:0: Attached scsi CD-ROM sr0 [ 2.114700] sr 1:0:0:0: Attached scsi generic sg1 type 5 [ 2.122488] Freeing unused kernel image (initmem) memory: 2680K [ 2.122687] Write protecting the kernel read-only data: 24576k [ 2.167806] Freeing unused kernel image (rodata/data gap) memory: 2028K [ 2.202682] usb 6-2: new full-speed USB device number 2 using ohci-pci [ 2.276143] x86/mm: Checked W+X mappings: passed, no W+X pages found. [ 2.276313] Run /init as init process [ 2.276413] with arguments: [ 2.276414] /init [ 2.276416] placeholder [ 2.276417] with environment: [ 2.276418] HOME=/ [ 2.276420] TERM=linux [ 2.363805] usb 6-2: New USB device found, idVendor=0557, idProduct=2221, bcdDevice= 0.01 [ 2.363997] usb 6-2: New USB device strings: Mfr=1, Product=2, SerialNumber=0 [ 2.364118] usb 6-2: Product: Hermon USB hidmouse Device [ 2.364232] usb 6-2: Manufacturer: Winbond Electronics Corp [ 2.370387] input: Winbond Electronics Corp Hermon USB hidmouse Device as /devices/pci0000:00/0000:00:13.1/usb6/6-2/6-2:1.0/0003:0557:2221.0001/input/input5 [ 2.370831] hid-generic 0003:0557:2221.0001: input,hidraw0: USB HID v1.00 Mouse [Winbond Electronics Corp Hermon USB hidmouse Device] on usb-0000:00:13.1-2/input0 [ 2.374204] input: Winbond Electronics Corp Hermon USB hidmouse Device as /devices/pci0000:00/0000:00:13.1/usb6/6-2/6-2:1.1/0003:0557:2221.0002/input/input6 [ 2.426079] hid-generic 0003:0557:2221.0002: input,hidraw1: USB HID v1.00 Keyboard [Winbond Electronics Corp Hermon USB hidmouse Device] on usb-0000:00:13.1-2/input1 [ 2.729557] e1000e: Intel(R) PRO/1000 Network Driver [ 2.729688] e1000e: Copyright(c) 1999 - 2015 Intel Corporation. [ 2.729968] xen: registering gsi 48 triggering 0 polarity 1 [ 2.730015] xen: --> pirq=48 -> irq=48 (gsi=48) [ 2.730242] e1000e 0000:01:00.0: Interrupt Throttling Rate (ints/sec) set to dynamic conservative mode [ 2.774332] e1000e 0000:01:00.0 0000:01:00.0 (uninitialized): registered PHC clock [ 2.818364] e1000e 0000:01:00.0 eth0: (PCI Express:2.5GT/s:Width x1) 0c:c4:7a:0a:48:f6 [ 2.818534] e1000e 0000:01:00.0 eth0: Intel(R) PRO/1000 Network Connection [ 2.818727] e1000e 0000:01:00.0 eth0: MAC: 3, PHY: 8, PBA No: 0101FF-0FF [ 2.818932] xen: registering gsi 47 triggering 0 polarity 1 [ 2.818959] xen: --> pirq=47 -> irq=47 (gsi=47) [ 2.819137] e1000e 0000:02:00.0: Interrupt Throttling Rate (ints/sec) set to dynamic conservative mode [ 2.867552] e1000e 0000:02:00.0 0000:02:00.0 (uninitialized): registered PHC clock [ 2.914530] e1000e 0000:02:00.0 eth1: (PCI Express:2.5GT/s:Width x1) 0c:c4:7a:0a:48:f7 [ 2.914679] e1000e 0000:02:00.0 eth1: Intel(R) PRO/1000 Network Connection [ 2.914866] e1000e 0000:02:00.0 eth1: MAC: 3, PHY: 8, PBA No: 0101FF-0FF [ 2.916692] e1000e 0000:01:00.0 enx0cc47a0a48f6: renamed from eth0 [ 2.916997] e1000e 0000:02:00.0 enx0cc47a0a48f7: renamed from eth1 [ 3.035512] random: crng init done [ 3.672342] EXT4-fs (dm-0): mounting ext3 file system using the ext4 subsystem [ 3.677482] EXT4-fs (dm-0): mounted filesystem 4a59ebe8-76b9-41ee-a19f-bad6be502622 ro with ordered data mode. Quota mode: none. [ 7.591745] EXT4-fs (dm-0): re-mounted 4a59ebe8-76b9-41ee-a19f-bad6be502622 r/w. Quota mode: none. [ 9.137919] EXT4-fs (sda1): mounting ext3 file system using the ext4 subsystem [ 9.162187] EXT4-fs (sda1): mounted filesystem 4a561edd-e20a-4e3f-acb6-1d843cd5df5c r/w with ordered data mode. Quota mode: none. [ 9.237944] Adding 1949692k swap on /dev/mapper/rimava1--vg-swap_1. Priority:-2 extents:1 across:1949692k [ 10.735808] xenbr0: port 1(enx0cc47a0a48f6) entered blocking state [ 10.735945] xenbr0: port 1(enx0cc47a0a48f6) entered disabled state [ 10.736076] e1000e 0000:01:00.0 enx0cc47a0a48f6: entered allmulticast mode [ 10.736231] e1000e 0000:01:00.0 enx0cc47a0a48f6: entered promiscuous mode [ 14.105542] e1000e 0000:01:00.0 enx0cc47a0a48f6: NIC Link is Up 1000 Mbps Full Duplex, Flow Control: None [ 14.106048] xenbr0: port 1(enx0cc47a0a48f6) entered blocking state [ 14.106158] xenbr0: port 1(enx0cc47a0a48f6) entered forwarding state