[ 0.000000] Linux version 6.1.95+ (osstest@himrod0) (gcc (Debian 12.2.0-14) 12.2.0, GNU ld (GNU Binutils for Debian) 2.40) #1 SMP PREEMPT_DYNAMIC Mon Jun 24 03:03:40 UTC 2024 [ 0.000000] Command line: placeholder root=/dev/mapper/debina0--vg-root ro console=hvc0 [ 0.000000] Released 0 page(s) [ 0.000000] BIOS-provided physical RAM map: [ 0.000000] Xen: [mem 0x0000000000000000-0x0000000000099fff] usable [ 0.000000] Xen: [mem 0x000000000009ac00-0x00000000000fffff] reserved [ 0.000000] Xen: [mem 0x0000000000100000-0x0000000020065fff] usable [ 0.000000] Xen: [mem 0x00000000796ef000-0x00000000798bdfff] reserved [ 0.000000] Xen: [mem 0x00000000799b7000-0x0000000079e5afff] ACPI NVS [ 0.000000] Xen: [mem 0x0000000079e5b000-0x000000007bdb0fff] reserved [ 0.000000] Xen: [mem 0x000000007bdb2000-0x000000007be37fff] reserved [ 0.000000] Xen: [mem 0x0000000080000000-0x000000008fffffff] reserved [ 0.000000] Xen: [mem 0x00000000fbffc000-0x00000000fbffcfff] reserved [ 0.000000] Xen: [mem 0x00000000fec00000-0x00000000fec00fff] reserved [ 0.000000] Xen: [mem 0x00000000fed1c000-0x00000000fed1ffff] reserved [ 0.000000] Xen: [mem 0x00000000fee00000-0x00000000feefffff] reserved [ 0.000000] Xen: [mem 0x00000000ff000000-0x00000000ffffffff] reserved [ 0.000000] NX (Execute Disable) protection: active [ 0.000000] SMBIOS 2.8 present. [ 0.000000] DMI: Supermicro SYS-5018D-FN8T/X10SDV-TP8F, BIOS 1.0b 11/21/2016 [ 0.000000] Hypervisor detected: Xen PV [ 0.000459] tsc: Detected 2199.996 MHz processor [ 0.000900] e820: update [mem 0x00000000-0x00000fff] usable ==> reserved [ 0.000903] e820: remove [mem 0x000a0000-0x000fffff] usable [ 0.000910] last_pfn = 0x20066 max_arch_pfn = 0x400000000 [ 0.000912] Disabled [ 0.000913] x86/PAT: MTRRs disabled, skipping PAT initialization too. [ 0.000916] x86/PAT: Configuration [0-7]: WB WT UC- UC WC WP UC UC [ 0.000956] Kernel/User page tables isolation: disabled on XEN PV. [ 0.027587] RAMDISK: [mem 0x04000000-0x0536afff] [ 0.027595] ACPI: Early table checksum verification disabled [ 0.028199] ACPI: RSDP 0x00000000000F0580 000024 (v02 SUPERM) [ 0.028211] ACPI: XSDT 0x00000000799FF098 0000B4 (v01 SUPERM SMCI--MB 01072009 AMI 00010013) [ 0.028248] ACPI: FACP 0x0000000079A17AC0 00010C (v05 SUPERM SMCI--MB 01072009 AMI 00010013) [ 0.028296] ACPI: DSDT 0x00000000799FF1E8 0188D5 (v02 SUPERM SMCI--MB 01072009 INTL 20091013) [ 0.028312] ACPI: FACS 0x0000000079E59F80 000040 [ 0.028329] ACPI: APIC 0x0000000079A17BD0 0000BC (v03 SUPERM SMCI--MB 01072009 AMI 00010013) [ 0.028345] ACPI: FPDT 0x0000000079A17C90 000044 (v01 SUPERM SMCI--MB 01072009 AMI 00010013) [ 0.028361] ACPI: FIDT 0x0000000079A17CD8 00009C (v01 SUPERM SMCI--MB 01072009 AMI 00010013) [ 0.028378] ACPI: MCFG 0x0000000079A17D78 00003C (v01 SUPERM SMCI--MB 01072009 MSFT 00000097) [ 0.028394] ACPI: UEFI 0x0000000079A17DB8 000042 (v01 00000000 00000000) [ 0.028410] ACPI: DBG2 0x0000000079A17E00 000072 (v00 SUPERM SMCI--MB 00000000 INTL 20091013) [ 0.028427] ACPI: HPET 0x0000000079A17E78 000038 (v01 SUPERM SMCI--MB 00000001 INTL 20091013) [ 0.028443] ACPI: WDDT 0x0000000079A17EB0 000040 (v01 SUPERM SMCI--MB 00000000 INTL 20091013) [ 0.028459] ACPI: SSDT 0x0000000079A17EF0 00ED8B (v01 AMI PmMgt 00000001 INTL 20120913) [ 0.028476] ACPI: SSDT 0x0000000079A26C80 002285 (v02 SUPERM SpsNm 00000002 INTL 20120913) [ 0.028492] ACPI: SSDT 0x0000000079A28F08 000064 (v02 SUPERM SpsNvs 00000002 INTL 20120913) [ 0.028508] ACPI: PRAD 0x0000000079A28F70 000102 (v02 SUPERM SMCI--MB 00000002 INTL 20120913) [ 0.028525] ACPI: RMAD 0x0000000079A29078 0000CC (v01 SUPERM SMCI--MB 00000001 INTL 20091013) [ 0.028541] ACPI: HEST 0x0000000079A29148 0000A8 (v01 SUPERM SMCI--MB 00000001 INTL 00000001) [ 0.028557] ACPI: BERT 0x0000000079A291F0 000030 (v01 SUPERM SMCI--MB 00000001 INTL 00000001) [ 0.028573] ACPI: ERST 0x0000000079A29220 000230 (v01 SUPERM SMCI--MB 00000001 INTL 00000001) [ 0.028589] ACPI: EINJ 0x0000000079A29450 000130 (v01 SUPERM SMCI--MB 00000001 INTL 00000001) [ 0.028598] ACPI: Reserving FACP table memory at [mem 0x79a17ac0-0x79a17bcb] [ 0.028600] ACPI: Reserving DSDT table memory at [mem 0x799ff1e8-0x79a17abc] [ 0.028601] ACPI: Reserving FACS table memory at [mem 0x79e59f80-0x79e59fbf] [ 0.028602] ACPI: Reserving APIC table memory at [mem 0x79a17bd0-0x79a17c8b] [ 0.028603] ACPI: Reserving FPDT table memory at [mem 0x79a17c90-0x79a17cd3] [ 0.028604] ACPI: Reserving FIDT table memory at [mem 0x79a17cd8-0x79a17d73] [ 0.028605] ACPI: Reserving MCFG table memory at [mem 0x79a17d78-0x79a17db3] [ 0.028606] ACPI: Reserving UEFI table memory at [mem 0x79a17db8-0x79a17df9] [ 0.028607] ACPI: Reserving DBG2 table memory at [mem 0x79a17e00-0x79a17e71] [ 0.028608] ACPI: Reserving HPET table memory at [mem 0x79a17e78-0x79a17eaf] [ 0.028609] ACPI: Reserving WDDT table memory at [mem 0x79a17eb0-0x79a17eef] [ 0.028610] ACPI: Reserving SSDT table memory at [mem 0x79a17ef0-0x79a26c7a] [ 0.028611] ACPI: Reserving SSDT table memory at [mem 0x79a26c80-0x79a28f04] [ 0.028612] ACPI: Reserving SSDT table memory at [mem 0x79a28f08-0x79a28f6b] [ 0.028613] ACPI: Reserving PRAD table memory at [mem 0x79a28f70-0x79a29071] [ 0.028613] ACPI: Reserving RMAD table memory at [mem 0x79a29078-0x79a29143] [ 0.028614] ACPI: Reserving HEST table memory at [mem 0x79a29148-0x79a291ef] [ 0.028615] ACPI: Reserving BERT table memory at [mem 0x79a291f0-0x79a2921f] [ 0.028616] ACPI: Reserving ERST table memory at [mem 0x79a29220-0x79a2944f] [ 0.028617] ACPI: Reserving EINJ table memory at [mem 0x79a29450-0x79a2957f] [ 0.028667] Setting APIC routing to Xen PV. [ 0.032724] Zone ranges: [ 0.032725] DMA [mem 0x0000000000001000-0x0000000000ffffff] [ 0.032728] DMA32 [mem 0x0000000001000000-0x0000000020065fff] [ 0.032730] Normal empty [ 0.032731] Movable zone start for each node [ 0.032732] Early memory node ranges [ 0.032732] node 0: [mem 0x0000000000001000-0x0000000000099fff] [ 0.032734] node 0: [mem 0x0000000000100000-0x0000000020065fff] [ 0.032736] Initmem setup node 0 [mem 0x0000000000001000-0x0000000020065fff] [ 0.032740] On node 0, zone DMA: 1 pages in unavailable ranges [ 0.032777] On node 0, zone DMA: 102 pages in unavailable ranges [ 0.034318] On node 0, zone DMA32: 32666 pages in unavailable ranges [ 0.034323] p2m virtual area at (____ptrval____), size is 40000000 [ 0.221932] Remapped 102 page(s) [ 0.223352] ACPI: PM-Timer IO Port: 0x408 [ 0.223405] ACPI: LAPIC_NMI (acpi_id[0x00] high level lint[0x1]) [ 0.223407] ACPI: LAPIC_NMI (acpi_id[0x02] high level lint[0x1]) [ 0.223409] ACPI: LAPIC_NMI (acpi_id[0x04] high level lint[0x1]) [ 0.223411] ACPI: LAPIC_NMI (acpi_id[0x06] high level lint[0x1]) [ 0.223412] ACPI: LAPIC_NMI (acpi_id[0x01] high level lint[0x1]) [ 0.223413] ACPI: LAPIC_NMI (acpi_id[0x03] high level lint[0x1]) [ 0.223415] ACPI: LAPIC_NMI (acpi_id[0x05] high level lint[0x1]) [ 0.223416] ACPI: LAPIC_NMI (acpi_id[0x07] high level lint[0x1]) [ 0.223445] IOAPIC[0]: apic_id 8, version 32, address 0xfec00000, GSI 0-23 [ 0.223458] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl) [ 0.223462] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level) [ 0.223488] ACPI: Using ACPI (MADT) for SMP configuration information [ 0.223493] ACPI: HPET id: 0x8086a701 base: 0xfed00000 [ 0.223563] smpboot: Allowing 8 CPUs, 0 hotplug CPUs [ 0.223578] PM: hibernation: Registered nosave memory: [mem 0x00000000-0x00000fff] [ 0.223580] PM: hibernation: Registered nosave memory: [mem 0x0009a000-0x0009afff] [ 0.223581] PM: hibernation: Registered nosave memory: [mem 0x0009b000-0x000fffff] [ 0.223583] [mem 0x90000000-0xfbffbfff] available for PCI devices [ 0.223593] Booting kernel on Xen [ 0.223593] Xen version: 4.19-unstable (preserve-AD) [ 0.223597] clocksource: refined-jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 1910969940391419 ns [ 0.229825] setup_percpu: NR_CPUS:64 nr_cpumask_bits:8 nr_cpu_ids:8 nr_node_ids:1 [ 0.230105] percpu: Embedded 54 pages/cpu s180520 r8192 d32472 u262144 [ 0.230112] pcpu-alloc: s180520 r8192 d32472 u262144 alloc=1*2097152 [ 0.230115] pcpu-alloc: [0] 0 1 2 3 4 5 6 7 [ 0.230192] xen: PV spinlocks enabled [ 0.230195] PV qspinlock hash table entries: 256 (order: 0, 4096 bytes, linear) [ 0.230200] Built 1 zonelists, mobility grouping on. Total pages: 129006 [ 0.230202] Kernel command line: placeholder root=/dev/mapper/debina0--vg-root ro console=hvc0 [ 0.230240] Unknown kernel command line parameters "placeholder", will be passed to user space. [ 0.230250] random: crng init done [ 0.230299] Dentry cache hash table entries: 65536 (order: 7, 524288 bytes, linear) [ 0.230324] Inode-cache hash table entries: 32768 (order: 6, 262144 bytes, linear) [ 0.231662] mem auto-init: stack:all(zero), heap alloc:off, heap free:off [ 0.231664] software IO TLB: area num 8. [ 0.291379] Memory: 390032K/524284K available (14349K kernel code, 2682K rwdata, 4576K rodata, 1576K init, 1296K bss, 134000K reserved, 0K cma-reserved) [ 0.291546] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=8, Nodes=1 [ 0.294081] Dynamic Preempt: voluntary [ 0.294179] rcu: Preemptible hierarchical RCU implementation. [ 0.294180] rcu: RCU event tracing is enabled. [ 0.294181] rcu: RCU restricting CPUs from NR_CPUS=64 to nr_cpu_ids=8. [ 0.294183] Trampoline variant of Tasks RCU enabled. [ 0.294184] rcu: RCU calculated value of scheduler-enlistment delay is 100 jiffies. [ 0.294185] rcu: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=8 [ 0.304676] NR_IRQS: 4352, nr_irqs: 488, preallocated irqs: 16 [ 0.304799] xen:events: Using FIFO-based ABI [ 0.304829] xen: --> pirq=1 -> irq=1 (gsi=1) [ 0.304838] xen: --> pirq=2 -> irq=2 (gsi=2) [ 0.304846] xen: --> pirq=3 -> irq=3 (gsi=3) [ 0.304854] xen: --> pirq=4 -> irq=4 (gsi=4) [ 0.304861] xen: --> pirq=5 -> irq=5 (gsi=5) [ 0.304869] xen: --> pirq=6 -> irq=6 (gsi=6) [ 0.304876] xen: --> pirq=7 -> irq=7 (gsi=7) [ 0.304884] xen: --> pirq=8 -> irq=8 (gsi=8) [ 0.304892] xen: --> pirq=9 -> irq=9 (gsi=9) [ 0.304899] xen: --> pirq=10 -> irq=10 (gsi=10) [ 0.304907] xen: --> pirq=11 -> irq=11 (gsi=11) [ 0.304915] xen: --> pirq=12 -> irq=12 (gsi=12) [ 0.304922] xen: --> pirq=13 -> irq=13 (gsi=13) [ 0.304930] xen: --> pirq=14 -> irq=14 (gsi=14) [ 0.304939] xen: --> pirq=15 -> irq=15 (gsi=15) [ 0.304950] rcu: srcu_init: Setting srcu_struct sizes based on contention. [ 0.310304] Console: colour VGA+ 80x25 [ 0.325092] printk: console [tty0] enabled [ 0.326435] printk: console [hvc0] enabled [ 0.326571] ACPI: Core revision 20220331 [ 0.342069] clocksource: xen: mask: 0xffffffffffffffff max_cycles: 0x1cd42e4dffb, max_idle_ns: 881590591483 ns [ 0.342235] Xen: using vcpuop timer interface [ 0.342243] installing Xen timer for CPU 0 [ 0.342393] clocksource: tsc-early: mask: 0xffffffffffffffff max_cycles: 0x1fb62f12e8c, max_idle_ns: 440795238402 ns [ 0.342552] Calibrating delay loop (skipped), value calculated using timer frequency.. 4399.99 BogoMIPS (lpj=2199996) [ 0.342883] Last level iTLB entries: 4KB 64, 2MB 8, 4MB 8 [ 0.343000] Last level dTLB entries: 4KB 64, 2MB 0, 4MB 0, 1GB 4 [ 0.343127] Spectre V1 : Mitigation: usercopy/swapgs barriers and __user pointer sanitization [ 0.343277] Spectre V2 : Mitigation: Retpolines [ 0.343558] Spectre V2 : Spectre v2 / SpectreRSB mitigation: Filling RSB on context switch [ 0.343705] Spectre V2 : Spectre v2 / SpectreRSB : Filling RSB on VMEXIT [ 0.343825] Spectre V2 : Enabling Restricted Speculation for firmware calls [ 0.343946] Spectre V2 : mitigation: Enabling conditional Indirect Branch Prediction Barrier [ 0.344094] Spectre V2 : User space: Mitigation: STIBP via prctl [ 0.344213] Speculative Store Bypass: Mitigation: Speculative Store Bypass disabled via prctl [ 0.344365] MDS: Mitigation: Clear CPU buffers [ 0.344478] TAA: Mitigation: Clear CPU buffers [ 0.344556] MMIO Stale Data: Vulnerable: Clear CPU buffers attempted, no microcode [ 0.344722] x86/fpu: Supporting XSAVE feature 0x001: 'x87 floating point registers' [ 0.344871] x86/fpu: Supporting XSAVE feature 0x002: 'SSE registers' [ 0.345008] x86/fpu: Supporting XSAVE feature 0x004: 'AVX registers' [ 0.345127] x86/fpu: xstate_offset[2]: 576, xstate_sizes[2]: 256 [ 0.345247] x86/fpu: Enabled xstate features 0x7, context size is 832 bytes, using 'standard' format. [ 0.362972] Freeing SMP alternatives memory: 40K [ 0.363099] pid_max: default: 32768 minimum: 301 [ 0.363573] LSM: Security Framework initializing [ 0.363697] SELinux: Initializing. [ 0.363836] Mount-cache hash table entries: 1024 (order: 1, 8192 bytes, linear) [ 0.363988] Mountpoint-cache hash table entries: 1024 (order: 1, 8192 bytes, linear) [ 0.364643] cpu 0 spinlock event irq 25 [ 0.364763] VPMU disabled by hypervisor. [ 0.365200] cblist_init_generic: Setting adjustable number of callback queues. [ 0.365347] cblist_init_generic: Setting shift to 3 and lim to 1. [ 0.365503] Performance Events: unsupported p6 CPU model 86 no PMU driver, software events only. [ 0.365557] signal: max sigframe size: 1776 [ 0.365720] rcu: Hierarchical SRCU implementation. [ 0.365849] rcu: Max phase no-delay instances is 400. [ 0.366346] smp: Bringing up secondary CPUs ... [ 0.366679] installing Xen timer for CPU 1 [ 0.367149] cpu 1 spinlock event irq 35 [ 0.367695] MDS CPU bug present and SMT on, data leak possible. See https://www.kernel.org/doc/html/latest/admin-guide/hw-vuln/mds.html for more details. [ 0.367864] TAA CPU bug present and SMT on, data leak possible. See https://www.kernel.org/doc/html/latest/admin-guide/hw-vuln/tsx_async_abort.html for more details. [ 0.368053] MMIO Stale Data CPU bug present and SMT on, data leak possible. See https://www.kernel.org/doc/html/latest/admin-guide/hw-vuln/processor_mmio_stale_data.html for more details. [ 0.368779] installing Xen timer for CPU 2 [ 0.369235] cpu 2 spinlock event irq 41 [ 0.369639] installing Xen timer for CPU 3 [ 0.370073] cpu 3 spinlock event irq 47 [ 0.370073] installing Xen timer for CPU 4 [ 0.370895] cpu 4 spinlock event irq 53 [ 0.370895] installing Xen timer for CPU 5 [ 0.371730] cpu 5 spinlock event irq 59 [ 0.371760] installing Xen timer for CPU 6 [ 0.372618] cpu 6 spinlock event irq 65 [ 0.372810] installing Xen timer for CPU 7 [ 0.373267] cpu 7 spinlock event irq 71 [ 0.373823] smp: Brought up 1 node, 8 CPUs [ 0.373943] smpboot: Max logical packages: 1 [ 0.374160] devtmpfs: initialized [ 0.374587] x86/mm: Memory block size: 128MB [ 0.374937] ACPI: PM: Registering ACPI NVS region [mem 0x799b7000-0x79e5afff] (4866048 bytes) [ 0.374937] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 1911260446275000 ns [ 0.374984] futex hash table entries: 2048 (order: 5, 131072 bytes, linear) [ 0.375687] PM: RTC time: 03:21:28, date: 2024-06-24 [ 0.375935] NET: Registered PF_NETLINK/PF_ROUTE protocol family [ 0.376082] xen:grant_table: Grant tables using version 1 layout [ 0.376225] Grant table initialized [ 0.376527] audit: initializing netlink subsys (disabled) [ 0.376687] audit: type=2000 audit(1719199288.808:1): state=initialized audit_enabled=0 res=1 [ 0.376687] thermal_sys: Registered thermal governor 'step_wise' [ 0.376687] thermal_sys: Registered thermal governor 'user_space' [ 0.376751] ACPI FADT declares the system doesn't support PCIe ASPM, so disable it [ 0.377589] PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0x80000000-0x8fffffff] (base 0x80000000) [ 0.377745] PCI: MMCONFIG at [mem 0x80000000-0x8fffffff] reserved in E820 [ 0.506527] PCI: Using configuration type 1 for base access [ 0.509268] kprobes: kprobe jump-optimization is enabled. All kprobes are optimized if possible. [ 0.509636] ACPI: Added _OSI(Module Device) [ 0.509737] ACPI: Added _OSI(Processor Device) [ 0.509851] ACPI: Added _OSI(3.0 _SCP Extensions) [ 0.510001] ACPI: Added _OSI(Processor Aggregator Device) [ 0.540771] ACPI: 4 ACPI AML tables successfully acquired and loaded [ 0.542771] xen: registering gsi 9 triggering 0 polarity 0 [ 0.545532] ACPI: Dynamic OEM Table Load: [ 0.552814] ACPI: Interpreter enabled [ 0.552948] ACPI: PM: (supports S0 S4 S5) [ 0.553060] ACPI: Using IOAPIC for interrupt routing [ 0.553207] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug [ 0.553358] PCI: Using E820 reservations for host bridge windows [ 0.553940] ACPI: Enabled 6 GPEs in block 00 to 3F [ 0.587995] ACPI: PCI Root Bridge [UNC0] (domain 0000 [bus ff]) [ 0.588125] acpi PNP0A03:03: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI HPX-Type3] [ 0.588362] acpi PNP0A03:03: _OSC: platform does not support [LTR] [ 0.588632] acpi PNP0A03:03: _OSC: OS now controls [PME PCIeCapability] [ 0.588756] acpi PNP0A03:03: FADT indicates ASPM is unsupported, using BIOS configuration [ 0.588961] PCI host bridge to bus 0000:ff [ 0.589074] pci_bus 0000:ff: root bus resource [bus ff] [ 0.589270] pci 0000:ff:0b.0: [8086:6f81] type 00 class 0x088000 [ 0.589732] pci 0000:ff:0b.1: [8086:6f36] type 00 class 0x110100 [ 0.590192] pci 0000:ff:0b.2: [8086:6f37] type 00 class 0x110100 [ 0.590629] pci 0000:ff:0b.3: [8086:6f76] type 00 class 0x088000 [ 0.591078] pci 0000:ff:0c.0: [8086:6fe0] type 00 class 0x088000 [ 0.591509] pci 0000:ff:0c.1: [8086:6fe1] type 00 class 0x088000 [ 0.591867] pci 0000:ff:0c.2: [8086:6fe2] type 00 class 0x088000 [ 0.592297] pci 0000:ff:0c.3: [8086:6fe3] type 00 class 0x088000 [ 0.592759] pci 0000:ff:0f.0: [8086:6ff8] type 00 class 0x088000 [ 0.593209] pci 0000:ff:0f.4: [8086:6ffc] type 00 class 0x088000 [ 0.593641] pci 0000:ff:0f.5: [8086:6ffd] type 00 class 0x088000 [ 0.594075] pci 0000:ff:0f.6: [8086:6ffe] type 00 class 0x088000 [ 0.594517] pci 0000:ff:10.0: [8086:6f1d] type 00 class 0x088000 [ 0.594868] pci 0000:ff:10.1: [8086:6f34] type 00 class 0x110100 [ 0.595313] pci 0000:ff:10.5: [8086:6f1e] type 00 class 0x088000 [ 0.595754] pci 0000:ff:10.6: [8086:6f7d] type 00 class 0x110100 [ 0.596185] pci 0000:ff:10.7: [8086:6f1f] type 00 class 0x088000 [ 0.596624] pci 0000:ff:12.0: [8086:6fa0] type 00 class 0x088000 [ 0.596887] pci 0000:ff:12.1: [8086:6f30] type 00 class 0x110100 [ 0.597356] pci 0000:ff:13.0: [8086:6fa8] type 00 class 0x088000 [ 0.597839] pci 0000:ff:13.1: [8086:6f71] type 00 class 0x088000 [ 0.598318] pci 0000:ff:13.2: [8086:6faa] type 00 class 0x088000 [ 0.598798] pci 0000:ff:13.3: [8086:6fab] type 00 class 0x088000 [ 0.599275] pci 0000:ff:13.4: [8086:6fac] type 00 class 0x088000 [ 0.599756] pci 0000:ff:13.5: [8086:6fad] type 00 class 0x088000 [ 0.600225] pci 0000:ff:13.6: [8086:6fae] type 00 class 0x088000 [ 0.600658] pci 0000:ff:13.7: [8086:6faf] type 00 class 0x088000 [ 0.601100] pci 0000:ff:14.0: [8086:6fb0] type 00 class 0x088000 [ 0.601578] pci 0000:ff:14.1: [8086:6fb1] type 00 class 0x088000 [ 0.602056] pci 0000:ff:14.2: [8086:6fb2] type 00 class 0x088000 [ 0.602533] pci 0000:ff:14.3: [8086:6fb3] type 00 class 0x088000 [ 0.602905] pci 0000:ff:14.4: [8086:6fbc] type 00 class 0x088000 [ 0.603338] pci 0000:ff:14.5: [8086:6fbd] type 00 class 0x088000 [ 0.603774] pci 0000:ff:14.6: [8086:6fbe] type 00 class 0x088000 [ 0.604206] pci 0000:ff:14.7: [8086:6fbf] type 00 class 0x088000 [ 0.604650] pci 0000:ff:15.0: [8086:6fb4] type 00 class 0x088000 [ 0.605130] pci 0000:ff:15.1: [8086:6fb5] type 00 class 0x088000 [ 0.605616] pci 0000:ff:15.2: [8086:6fb6] type 00 class 0x088000 [ 0.606094] pci 0000:ff:15.3: [8086:6fb7] type 00 class 0x088000 [ 0.606624] pci 0000:ff:1e.0: [8086:6f98] type 00 class 0x088000 [ 0.607057] pci 0000:ff:1e.1: [8086:6f99] type 00 class 0x088000 [ 0.607489] pci 0000:ff:1e.2: [8086:6f9a] type 00 class 0x088000 [ 0.607873] pci 0000:ff:1e.3: [8086:6fc0] type 00 class 0x088000 [ 0.608126] pci 0000:ff:1e.4: [8086:6f9c] type 00 class 0x088000 [ 0.608574] pci 0000:ff:1f.0: [8086:6f88] type 00 class 0x088000 [ 0.609012] pci 0000:ff:1f.2: [8086:6f8a] type 00 class 0x088000 [ 0.609453] pci_bus 0000:ff: on NUMA node 0 [ 0.613753] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-fe]) [ 0.613880] acpi PNP0A08:00: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI HPX-Type3] [ 0.614157] acpi PNP0A08:00: _OSC: platform does not support [PME LTR] [ 0.614501] acpi PNP0A08:00: _OSC: OS now controls [PCIeCapability] [ 0.614555] acpi PNP0A08:00: FADT indicates ASPM is unsupported, using BIOS configuration [ 0.615040] PCI host bridge to bus 0000:00 [ 0.615155] pci_bus 0000:00: root bus resource [io 0x0000-0x0cf7 window] [ 0.615277] pci_bus 0000:00: root bus resource [io 0x1000-0xffff window] [ 0.615398] pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff window] [ 0.615543] pci_bus 0000:00: root bus resource [mem 0x90000000-0xfbffbfff window] [ 0.615689] pci_bus 0000:00: root bus resource [bus 00-fe] [ 0.615869] pci 0000:00:00.0: [8086:6f00] type 00 class 0x060000 [ 0.616558] pci 0000:00:01.0: [8086:6f02] type 01 class 0x060400 [ 0.617092] pci 0000:00:01.0: PME# supported from D0 D3hot D3cold [ 0.617465] pci 0000:00:01.1: [8086:6f03] type 01 class 0x060400 [ 0.617968] pci 0000:00:01.1: PME# supported from D0 D3hot D3cold [ 0.618361] pci 0000:00:02.0: [8086:6f04] type 01 class 0x060400 [ 0.618891] pci 0000:00:02.0: PME# supported from D0 D3hot D3cold [ 0.619250] pci 0000:00:02.2: [8086:6f06] type 01 class 0x060400 [ 0.619778] pci 0000:00:02.2: PME# supported from D0 D3hot D3cold [ 0.620158] pci 0000:00:03.0: [8086:6f08] type 01 class 0x060400 [ 0.620696] pci 0000:00:03.0: PME# supported from D0 D3hot D3cold [ 0.621068] pci 0000:00:03.2: [8086:6f0a] type 01 class 0x060400 [ 0.621600] pci 0000:00:03.2: PME# supported from D0 D3hot D3cold [ 0.621974] pci 0000:00:05.0: [8086:6f28] type 00 class 0x088000 [ 0.622564] pci 0000:00:05.1: [8086:6f29] type 00 class 0x088000 [ 0.623201] pci 0000:00:05.2: [8086:6f2a] type 00 class 0x088000 [ 0.623881] pci 0000:00:14.0: [8086:8c31] type 00 class 0x0c0330 [ 0.624104] pci 0000:00:14.0: reg 0x10: [mem 0xfb600000-0xfb60ffff 64bit] [ 0.624599] pci 0000:00:14.0: PME# supported from D3hot D3cold [ 0.624951] pci 0000:00:16.0: [8086:8c3a] type 00 class 0x078000 [ 0.625172] pci 0000:00:16.0: reg 0x10: [mem 0xfb617000-0xfb61700f 64bit] [ 0.625649] pci 0000:00:16.0: PME# supported from D0 D3hot D3cold [ 0.625957] pci 0000:00:16.1: [8086:8c3b] type 00 class 0x078000 [ 0.626177] pci 0000:00:16.1: reg 0x10: [mem 0xfb616000-0xfb61600f 64bit] [ 0.626649] pci 0000:00:16.1: PME# supported from D0 D3hot D3cold [ 0.627013] pci 0000:00:1a.0: [8086:8c2d] type 00 class 0x0c0320 [ 0.627212] pci 0000:00:1a.0: reg 0x10: [mem 0xfb614000-0xfb6143ff] [ 0.627757] pci 0000:00:1a.0: PME# supported from D0 D3hot D3cold [ 0.628078] pci 0000:00:1c.0: [8086:8c10] type 01 class 0x060400 [ 0.628642] pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold [ 0.628844] pci 0000:00:1c.0: Enabling MPC IRBNCE [ 0.628967] pci 0000:00:1c.0: Intel PCH root port ACS workaround enabled [ 0.636729] pci 0000:00:1c.1: [8086:8c12] type 01 class 0x060400 [ 0.637297] pci 0000:00:1c.1: PME# supported from D0 D3hot D3cold [ 0.637496] pci 0000:00:1c.1: Enabling MPC IRBNCE [ 0.637563] pci 0000:00:1c.1: Intel PCH root port ACS workaround enabled [ 0.637863] pci 0000:00:1c.3: [8086:8c16] type 01 class 0x060400 [ 0.638430] pci 0000:00:1c.3: PME# supported from D0 D3hot D3cold [ 0.638627] pci 0000:00:1c.3: Enabling MPC IRBNCE [ 0.638750] pci 0000:00:1c.3: Intel PCH root port ACS workaround enabled [ 0.639039] pci 0000:00:1c.4: [8086:8c18] type 01 class 0x060400 [ 0.639612] pci 0000:00:1c.4: PME# supported from D0 D3hot D3cold [ 0.639809] pci 0000:00:1c.4: Enabling MPC IRBNCE [ 0.639932] pci 0000:00:1c.4: Intel PCH root port ACS workaround enabled [ 0.640260] pci 0000:00:1d.0: [8086:8c26] type 00 class 0x0c0320 [ 0.640464] pci 0000:00:1d.0: reg 0x10: [mem 0xfb613000-0xfb6133ff] [ 0.640983] pci 0000:00:1d.0: PME# supported from D0 D3hot D3cold [ 0.641307] pci 0000:00:1f.0: [8086:8c54] type 00 class 0x060100 [ 0.642079] pci 0000:00:1f.2: [8086:8c02] type 00 class 0x010601 [ 0.642276] pci 0000:00:1f.2: reg 0x10: [io 0xf070-0xf077] [ 0.642435] pci 0000:00:1f.2: reg 0x14: [io 0xf060-0xf063] [ 0.642597] pci 0000:00:1f.2: reg 0x18: [io 0xf050-0xf057] [ 0.642756] pci 0000:00:1f.2: reg 0x1c: [io 0xf040-0xf043] [ 0.642915] pci 0000:00:1f.2: reg 0x20: [io 0xf020-0xf03f] [ 0.643074] pci 0000:00:1f.2: reg 0x24: [mem 0xfb612000-0xfb6127ff] [ 0.643400] pci 0000:00:1f.2: PME# supported from D3hot [ 0.643686] pci 0000:00:1f.3: [8086:8c22] type 00 class 0x0c0500 [ 0.643906] pci 0000:00:1f.3: reg 0x10: [mem 0xfb611000-0xfb6110ff 64bit] [ 0.644154] pci 0000:00:1f.3: reg 0x20: [io 0xf000-0xf01f] [ 0.644543] pci 0000:00:1f.6: [8086:8c24] type 00 class 0x118000 [ 0.644766] pci 0000:00:1f.6: reg 0x10: [mem 0xfb610000-0xfb610fff 64bit] [ 0.645496] pci 0000:00:01.0: PCI bridge to [bus 01] [ 0.645739] pci 0000:00:01.1: PCI bridge to [bus 02] [ 0.646084] pci 0000:03:00.0: [8086:6f50] type 00 class 0x088000 [ 0.646299] pci 0000:03:00.0: reg 0x10: [mem 0xfb506000-0xfb507fff 64bit] [ 0.647069] pci 0000:03:00.1: [8086:6f51] type 00 class 0x088000 [ 0.647285] pci 0000:03:00.1: reg 0x10: [mem 0xfb504000-0xfb505fff 64bit] [ 0.648008] pci 0000:03:00.2: [8086:6f52] type 00 class 0x088000 [ 0.648225] pci 0000:03:00.2: reg 0x10: [mem 0xfb502000-0xfb503fff 64bit] [ 0.648949] pci 0000:03:00.3: [8086:6f53] type 00 class 0x088000 [ 0.649165] pci 0000:03:00.3: reg 0x10: [mem 0xfb500000-0xfb501fff 64bit] [ 0.649878] pci 0000:00:02.0: PCI bridge to [bus 03] [ 0.650020] pci 0000:00:02.0: bridge window [mem 0xfb500000-0xfb5fffff] [ 0.650376] pci 0000:04:00.0: [8086:15ac] type 00 class 0x020000 [ 0.650596] pci 0000:04:00.0: reg 0x10: [mem 0xfbc00000-0xfbdfffff 64bit pref] [ 0.650885] pci 0000:04:00.0: reg 0x20: [mem 0xfbe04000-0xfbe07fff 64bit pref] [ 0.651071] pci 0000:04:00.0: reg 0x30: [mem 0xfb480000-0xfb4fffff pref] [ 0.651429] pci 0000:04:00.0: PME# supported from D0 D3hot D3cold [ 0.651655] pci 0000:04:00.0: reg 0x184: [mem 0x00000000-0x00003fff 64bit] [ 0.651776] pci 0000:04:00.0: VF(n) BAR0 space: [mem 0x00000000-0x000fffff 64bit] (contains BAR0 for 64 VFs) [ 0.651983] pci 0000:04:00.0: reg 0x190: [mem 0x00000000-0x00003fff 64bit] [ 0.652104] pci 0000:04:00.0: VF(n) BAR3 space: [mem 0x00000000-0x000fffff 64bit] (contains BAR3 for 64 VFs) [ 0.652695] pci 0000:04:00.1: [8086:15ac] type 00 class 0x020000 [ 0.652916] pci 0000:04:00.1: reg 0x10: [mem 0xfba00000-0xfbbfffff 64bit pref] [ 0.653206] pci 0000:04:00.1: reg 0x20: [mem 0xfbe00000-0xfbe03fff 64bit pref] [ 0.653391] pci 0000:04:00.1: reg 0x30: [mem 0xfb400000-0xfb47ffff pref] [ 0.653745] pci 0000:04:00.1: PME# supported from D0 D3hot D3cold [ 0.653951] pci 0000:04:00.1: reg 0x184: [mem 0x00000000-0x00003fff 64bit] [ 0.654074] pci 0000:04:00.1: VF(n) BAR0 space: [mem 0x00000000-0x000fffff 64bit] (contains BAR0 for 64 VFs) [ 0.654305] pci 0000:04:00.1: reg 0x190: [mem 0x00000000-0x00003fff 64bit] [ 0.654431] pci 0000:04:00.1: VF(n) BAR3 space: [mem 0x00000000-0x000fffff 64bit] (contains BAR3 for 64 VFs) [ 0.654972] pci 0000:00:02.2: PCI bridge to [bus 04] [ 0.655108] pci 0000:00:02.2: bridge window [mem 0xfb400000-0xfb4fffff] [ 0.655247] pci 0000:00:02.2: bridge window [mem 0xfba00000-0xfbefffff 64bit pref] [ 0.655541] pci 0000:00:03.0: PCI bridge to [bus 05] [ 0.655738] pci 0000:00:03.2: PCI bridge to [bus 06] [ 0.656108] pci 0000:07:00.0: working around ROM BAR overlap defect [ 0.656228] pci 0000:07:00.0: [8086:1533] type 00 class 0x020000 [ 0.656437] pci 0000:07:00.0: reg 0x10: [mem 0xfb300000-0xfb37ffff] [ 0.656654] pci 0000:07:00.0: reg 0x18: [io 0xe000-0xe01f] [ 0.656827] pci 0000:07:00.0: reg 0x1c: [mem 0xfb380000-0xfb383fff] [ 0.657367] pci 0000:07:00.0: PME# supported from D0 D3hot D3cold [ 0.657832] pci 0000:00:1c.0: PCI bridge to [bus 07] [ 0.657958] pci 0000:00:1c.0: bridge window [io 0xe000-0xefff] [ 0.658093] pci 0000:00:1c.0: bridge window [mem 0xfb300000-0xfb3fffff] [ 0.658455] pci 0000:08:00.0: working around ROM BAR overlap defect [ 0.658555] pci 0000:08:00.0: [8086:1533] type 00 class 0x020000 [ 0.658764] pci 0000:08:00.0: reg 0x10: [mem 0xfb200000-0xfb27ffff] [ 0.658983] pci 0000:08:00.0: reg 0x18: [io 0xd000-0xd01f] [ 0.659149] pci 0000:08:00.0: reg 0x1c: [mem 0xfb280000-0xfb283fff] [ 0.659692] pci 0000:08:00.0: PME# supported from D0 D3hot D3cold [ 0.660162] pci 0000:00:1c.1: PCI bridge to [bus 08] [ 0.660288] pci 0000:00:1c.1: bridge window [io 0xd000-0xdfff] [ 0.660417] pci 0000:00:1c.1: bridge window [mem 0xfb200000-0xfb2fffff] [ 0.660764] pci 0000:09:00.0: [1a03:1150] type 01 class 0x060400 [ 0.661171] pci 0000:09:00.0: enabling Extended Tags [ 0.661517] pci 0000:09:00.0: supports D1 D2 [ 0.661555] pci 0000:09:00.0: PME# supported from D0 D1 D2 D3hot D3cold [ 0.661916] pci 0000:00:1c.3: PCI bridge to [bus 09-0a] [ 0.662043] pci 0000:00:1c.3: bridge window [io 0xc000-0xcfff] [ 0.662179] pci 0000:00:1c.3: bridge window [mem 0xfa000000-0xfb0fffff] [ 0.662487] pci_bus 0000:0a: extended config space not accessible [ 0.662609] pci 0000:0a:00.0: [1a03:2000] type 00 class 0x030000 [ 0.662817] pci 0000:0a:00.0: reg 0x10: [mem 0xfa000000-0xfaffffff] [ 0.662985] pci 0000:0a:00.0: reg 0x14: [mem 0xfb000000-0xfb01ffff] [ 0.663154] pci 0000:0a:00.0: reg 0x18: [io 0xc000-0xc07f] [ 0.663517] pci 0000:0a:00.0: Video device with shadowed ROM at [mem 0x000c0000-0x000dffff] [ 0.663700] pci 0000:0a:00.0: supports D1 D2 [ 0.663814] pci 0000:0a:00.0: PME# supported from D0 D1 D2 D3hot D3cold [ 0.664260] pci 0000:09:00.0: PCI bridge to [bus 0a] [ 0.664399] pci 0000:09:00.0: bridge window [io 0xc000-0xcfff] [ 0.664529] pci 0000:09:00.0: bridge window [mem 0xfa000000-0xfb0fffff] [ 0.664832] pci 0000:0b:00.0: [8086:1521] type 00 class 0x020000 [ 0.665035] pci 0000:0b:00.0: reg 0x10: [mem 0xfb160000-0xfb17ffff] [ 0.665246] pci 0000:0b:00.0: reg 0x18: [io 0xb060-0xb07f] [ 0.665409] pci 0000:0b:00.0: reg 0x1c: [mem 0xfb18c000-0xfb18ffff] [ 0.665934] pci 0000:0b:00.0: PME# supported from D0 D3hot D3cold [ 0.666177] pci 0000:0b:00.0: reg 0x184: [mem 0x00000000-0x00003fff 64bit pref] [ 0.666323] pci 0000:0b:00.0: VF(n) BAR0 space: [mem 0x00000000-0x0001ffff 64bit pref] (contains BAR0 for 8 VFs) [ 0.666543] pci 0000:0b:00.0: reg 0x190: [mem 0x00000000-0x00003fff 64bit pref] [ 0.666688] pci 0000:0b:00.0: VF(n) BAR3 space: [mem 0x00000000-0x0001ffff 64bit pref] (contains BAR3 for 8 VFs) [ 0.667255] pci 0000:0b:00.1: [8086:1521] type 00 class 0x020000 [ 0.667464] pci 0000:0b:00.1: reg 0x10: [mem 0xfb140000-0xfb15ffff] [ 0.667647] pci 0000:0b:00.1: reg 0x18: [io 0xb040-0xb05f] [ 0.667810] pci 0000:0b:00.1: reg 0x1c: [mem 0xfb188000-0xfb18bfff] [ 0.668331] pci 0000:0b:00.1: PME# supported from D0 D3hot D3cold [ 0.668566] pci 0000:0b:00.1: reg 0x184: [mem 0x00000000-0x00003fff 64bit pref] [ 0.668714] pci 0000:0b:00.1: VF(n) BAR0 space: [mem 0x00000000-0x0001ffff 64bit pref] (contains BAR0 for 8 VFs) [ 0.668955] pci 0000:0b:00.1: reg 0x190: [mem 0x00000000-0x00003fff 64bit pref] [ 0.669099] pci 0000:0b:00.1: VF(n) BAR3 space: [mem 0x00000000-0x0001ffff 64bit pref] (contains BAR3 for 8 VFs) [ 0.669626] pci 0000:0b:00.2: [8086:1521] type 00 class 0x020000 [ 0.669829] pci 0000:0b:00.2: reg 0x10: [mem 0xfb120000-0xfb13ffff] [ 0.670040] pci 0000:0b:00.2: reg 0x18: [io 0xb020-0xb03f] [ 0.670209] pci 0000:0b:00.2: reg 0x1c: [mem 0xfb184000-0xfb187fff] [ 0.670731] pci 0000:0b:00.2: PME# supported from D0 D3hot D3cold [ 0.670962] pci 0000:0b:00.2: reg 0x184: [mem 0x00000000-0x00003fff 64bit pref] [ 0.671108] pci 0000:0b:00.2: VF(n) BAR0 space: [mem 0x00000000-0x0001ffff 64bit pref] (contains BAR0 for 8 VFs) [ 0.671328] pci 0000:0b:00.2: reg 0x190: [mem 0x00000000-0x00003fff 64bit pref] [ 0.671477] pci 0000:0b:00.2: VF(n) BAR3 space: [mem 0x00000000-0x0001ffff 64bit pref] (contains BAR3 for 8 VFs) [ 0.671923] pci 0000:0b:00.3: [8086:1521] type 00 class 0x020000 [ 0.672126] pci 0000:0b:00.3: reg 0x10: [mem 0xfb100000-0xfb11ffff] [ 0.672338] pci 0000:0b:00.3: reg 0x18: [io 0xb000-0xb01f] [ 0.672501] pci 0000:0b:00.3: reg 0x1c: [mem 0xfb180000-0xfb183fff] [ 0.672958] pci 0000:0b:00.3: PME# supported from D0 D3hot D3cold [ 0.673190] pci 0000:0b:00.3: reg 0x184: [mem 0x00000000-0x00003fff 64bit pref] [ 0.673335] pci 0000:0b:00.3: VF(n) BAR0 space: [mem 0x00000000-0x0001ffff 64bit pref] (contains BAR0 for 8 VFs) [ 0.673562] pci 0000:0b:00.3: reg 0x190: [mem 0x00000000-0x00003fff 64bit pref] [ 0.673707] pci 0000:0b:00.3: VF(n) BAR3 space: [mem 0x00000000-0x0001ffff 64bit pref] (contains BAR3 for 8 VFs) [ 0.674324] pci 0000:00:1c.4: PCI bridge to [bus 0b] [ 0.674451] pci 0000:00:1c.4: bridge window [io 0xb000-0xbfff] [ 0.674565] pci 0000:00:1c.4: bridge window [mem 0xfb100000-0xfb1fffff] [ 0.674706] pci 0000:00:1c.4: bridge has subordinate 0b but max busn 0c [ 0.675184] pci_bus 0000:00: on NUMA node 0 [ 0.675279] xen: registering gsi 13 triggering 1 polarity 0 [ 0.676289] ACPI: PCI: Interrupt link LNKA configured for IRQ 11 [ 0.676488] ACPI: PCI: Interrupt link LNKB configured for IRQ 10 [ 0.676630] ACPI: PCI: Interrupt link LNKC configured for IRQ 5 [ 0.676830] ACPI: PCI: Interrupt link LNKD configured for IRQ 11 [ 0.677022] ACPI: PCI: Interrupt link LNKE configured for IRQ 0 [ 0.677140] ACPI: PCI: Interrupt link LNKE disabled [ 0.677326] ACPI: PCI: Interrupt link LNKF configured for IRQ 0 [ 0.677445] ACPI: PCI: Interrupt link LNKF disabled [ 0.677628] ACPI: PCI: Interrupt link LNKG configured for IRQ 0 [ 0.677747] ACPI: PCI: Interrupt link LNKG disabled [ 0.677932] ACPI: PCI: Interrupt link LNKH configured for IRQ 0 [ 0.678051] ACPI: PCI: Interrupt link LNKH disabled [ 0.678322] xen:balloon: Initialising balloon driver [ 0.678461] iommu: Default domain type: Translated [ 0.685558] iommu: DMA domain TLB invalidation policy: lazy mode [ 0.685750] SCSI subsystem initialized [ 0.685877] libata version 3.00 loaded. [ 0.685877] ACPI: bus type USB registered [ 0.685877] usbcore: registered new interface driver usbfs [ 0.685877] usbcore: registered new interface driver hub [ 0.685963] usbcore: registered new device driver usb [ 0.686090] pps_core: LinuxPPS API ver. 1 registered [ 0.686555] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti [ 0.686706] PTP clock support registered [ 0.686842] Advanced Linux Sound Architecture Driver Initialized. [ 0.686848] NetLabel: Initializing [ 0.686960] NetLabel: domain hash size = 128 [ 0.687072] NetLabel: protocols = UNLABELED CIPSOv4 CALIPSO [ 0.687572] NetLabel: unlabeled traffic allowed by default [ 0.687711] PCI: Using ACPI for IRQ routing [ 0.724194] PCI: pci_cache_line_size set to 64 bytes [ 0.724194] e820: reserve RAM buffer [mem 0x0009a000-0x0009ffff] [ 0.724194] e820: reserve RAM buffer [mem 0x20066000-0x23ffffff] [ 0.724593] pci 0000:0a:00.0: vgaarb: setting as boot VGA device [ 0.724714] pci 0000:0a:00.0: vgaarb: bridge control possible [ 0.724832] pci 0000:0a:00.0: vgaarb: VGA device added: decodes=io+mem,owns=io+mem,locks=none [ 0.724982] vgaarb: loaded [ 0.726553] clocksource: Switched to clocksource tsc-early [ 0.726638] VFS: Disk quotas dquot_6.6.0 [ 0.726929] VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes) [ 0.727076] hugetlbfs: disabling because there are no supported hugepage sizes [ 0.727234] pnp: PnP ACPI init [ 0.727717] xen: registering gsi 8 triggering 1 polarity 0 [ 0.727909] system 00:01: [io 0x0500-0x057f] has been reserved [ 0.728035] system 00:01: [io 0x0400-0x047f] has been reserved [ 0.728155] system 00:01: [io 0x0580-0x059f] has been reserved [ 0.728274] system 00:01: [io 0x0600-0x061f] has been reserved [ 0.728392] system 00:01: [io 0x0880-0x0883] has been reserved [ 0.728511] system 00:01: [io 0x0800-0x081f] has been reserved [ 0.728655] system 00:01: [mem 0xfed1c000-0xfed3ffff] could not be reserved [ 0.728780] system 00:01: [mem 0xfed45000-0xfed8bfff] has been reserved [ 0.728900] system 00:01: [mem 0xff000000-0xffffffff] has been reserved [ 0.729021] system 00:01: [mem 0xfee00000-0xfeefffff] has been reserved [ 0.729141] system 00:01: [mem 0xfed12000-0xfed1200f] has been reserved [ 0.729268] system 00:01: [mem 0xfed12010-0xfed1201f] has been reserved [ 0.729395] system 00:01: [mem 0xfed1b000-0xfed1bfff] has been reserved [ 0.729831] system 00:02: [io 0x0a00-0x0a0f] has been reserved [ 0.729957] system 00:02: [io 0x0a10-0x0a1f] has been reserved [ 0.730075] system 00:02: [io 0x0a20-0x0a2f] has been reserved [ 0.730194] system 00:02: [io 0x0a30-0x0a3f] has been reserved [ 0.730312] system 00:02: [io 0x0a40-0x0a4f] has been reserved [ 0.730766] xen: registering gsi 4 triggering 1 polarity 0 [ 0.730771] Already setup the GSI :4 [ 0.730889] pnp 00:03: [dma 0 disabled] [ 0.731204] xen: registering gsi 3 triggering 1 polarity 0 [ 0.731214] pnp 00:04: [dma 0 disabled] [ 0.731831] pnp: PnP ACPI: found 5 devices [ 0.763115] PM-Timer failed consistency check (0xffffff) - aborting. [ 0.763310] NET: Registered PF_INET protocol family [ 0.763470] IP idents hash table entries: 8192 (order: 4, 65536 bytes, linear) [ 0.763861] tcp_listen_portaddr_hash hash table entries: 256 (order: 0, 4096 bytes, linear) [ 0.764025] Table-perturb hash table entries: 65536 (order: 6, 262144 bytes, linear) [ 0.764172] TCP established hash table entries: 4096 (order: 3, 32768 bytes, linear) [ 0.764323] TCP bind hash table entries: 4096 (order: 5, 131072 bytes, linear) [ 0.764492] TCP: Hash tables configured (established 4096 bind 4096) [ 0.764687] UDP hash table entries: 256 (order: 1, 8192 bytes, linear) [ 0.764842] UDP-Lite hash table entries: 256 (order: 1, 8192 bytes, linear) [ 0.764995] NET: Registered PF_UNIX/PF_LOCAL protocol family [ 0.765406] RPC: Registered named UNIX socket transport module. [ 0.765534] RPC: Registered udp transport module. [ 0.765666] RPC: Registered tcp transport module. [ 0.765780] RPC: Registered tcp NFSv4.1 backchannel transport module. [ 0.766339] pci 0000:00:1c.4: bridge window [mem 0x00100000-0x000fffff 64bit pref] to [bus 0b] add_size 100000 add_align 100000 [ 0.766512] clipped [mem size 0x00000000 64bit pref] to [mem size 0xfffffffffffa0000 64bit pref] for e820 entry [mem 0x0009ac00-0x000fffff] [ 0.766702] clipped [mem size 0x00020000 64bit pref] to [mem size 0xfffffffffffc0000 64bit pref] for e820 entry [mem 0x0009ac00-0x000fffff] [ 0.766872] pci 0000:00:1c.4: BAR 15: assigned [mem 0x90000000-0x900fffff 64bit pref] [ 0.767020] pci 0000:00:01.0: PCI bridge to [bus 01] [ 0.767196] pci 0000:00:01.1: PCI bridge to [bus 02] [ 0.767372] pci 0000:00:02.0: PCI bridge to [bus 03] [ 0.767506] pci 0000:00:02.0: bridge window [mem 0xfb500000-0xfb5fffff] [ 0.767698] pci 0000:04:00.0: BAR 7: no space for [mem size 0x00100000 64bit] [ 0.767824] pci 0000:04:00.0: BAR 7: failed to assign [mem size 0x00100000 64bit] [ 0.767970] pci 0000:04:00.0: BAR 10: no space for [mem size 0x00100000 64bit] [ 0.768120] pci 0000:04:00.0: BAR 10: failed to assign [mem size 0x00100000 64bit] [ 0.768267] pci 0000:04:00.1: BAR 7: no space for [mem size 0x00100000 64bit] [ 0.768390] pci 0000:04:00.1: BAR 7: failed to assign [mem size 0x00100000 64bit] [ 0.768535] pci 0000:04:00.1: BAR 10: no space for [mem size 0x00100000 64bit] [ 0.768699] pci 0000:04:00.1: BAR 10: failed to assign [mem size 0x00100000 64bit] [ 0.768848] pci 0000:04:00.0: BAR 7: no space for [mem size 0x00100000 64bit] [ 0.768970] pci 0000:04:00.0: BAR 7: failed to assign [mem size 0x00100000 64bit] [ 0.769116] pci 0000:04:00.0: BAR 10: no space for [mem size 0x00100000 64bit] [ 0.769260] pci 0000:04:00.0: BAR 10: failed to assign [mem size 0x00100000 64bit] [ 0.769405] pci 0000:04:00.1: BAR 7: no space for [mem size 0x00100000 64bit] [ 0.769535] pci 0000:04:00.1: BAR 7: failed to assign [mem size 0x00100000 64bit] [ 0.769691] pci 0000:04:00.1: BAR 10: no space for [mem size 0x00100000 64bit] [ 0.769836] pci 0000:04:00.1: BAR 10: failed to assign [mem size 0x00100000 64bit] [ 0.769981] pci 0000:00:02.2: PCI bridge to [bus 04] [ 0.770117] pci 0000:00:02.2: bridge window [mem 0xfb400000-0xfb4fffff] [ 0.770252] pci 0000:00:02.2: bridge window [mem 0xfba00000-0xfbefffff 64bit pref] [ 0.770424] pci 0000:00:03.0: PCI bridge to [bus 05] [ 0.770609] pci 0000:00:03.2: PCI bridge to [bus 06] [ 0.770801] pci 0000:00:1c.0: PCI bridge to [bus 07] [ 0.770929] pci 0000:00:1c.0: bridge window [io 0xe000-0xefff] [ 0.771069] pci 0000:00:1c.0: bridge window [mem 0xfb300000-0xfb3fffff] [ 0.771232] pci 0000:00:1c.1: PCI bridge to [bus 08] [ 0.771352] pci 0000:00:1c.1: bridge window [io 0xd000-0xdfff] [ 0.771491] pci 0000:00:1c.1: bridge window [mem 0xfb200000-0xfb2fffff] [ 0.771680] pci 0000:09:00.0: PCI bridge to [bus 0a] [ 0.771803] pci 0000:09:00.0: bridge window [io 0xc000-0xcfff] [ 0.771946] pci 0000:09:00.0: bridge window [mem 0xfa000000-0xfb0fffff] [ 0.772112] pci 0000:00:1c.3: PCI bridge to [bus 09-0a] [ 0.772233] pci 0000:00:1c.3: bridge window [io 0xc000-0xcfff] [ 0.772406] pci 0000:00:1c.3: bridge window [mem 0xfa000000-0xfb0fffff] [ 0.772585] pci 0000:0b:00.0: BAR 7: assigned [mem 0x90000000-0x9001ffff 64bit pref] [ 0.772761] pci 0000:0b:00.0: BAR 10: assigned [mem 0x90020000-0x9003ffff 64bit pref] [ 0.772917] pci 0000:0b:00.1: BAR 7: assigned [mem 0x90040000-0x9005ffff 64bit pref] [ 0.773071] pci 0000:0b:00.1: BAR 10: assigned [mem 0x90060000-0x9007ffff 64bit pref] [ 0.773224] pci 0000:0b:00.2: BAR 7: assigned [mem 0x90080000-0x9009ffff 64bit pref] [ 0.773377] pci 0000:0b:00.2: BAR 10: assigned [mem 0x900a0000-0x900bffff 64bit pref] [ 0.773531] pci 0000:0b:00.3: BAR 7: assigned [mem 0x900c0000-0x900dffff 64bit pref] [ 0.773714] pci 0000:0b:00.3: BAR 10: assigned [mem 0x900e0000-0x900fffff 64bit pref] [ 0.773871] pci 0000:00:1c.4: PCI bridge to [bus 0b] [ 0.773991] pci 0000:00:1c.4: bridge window [io 0xb000-0xbfff] [ 0.774131] pci 0000:00:1c.4: bridge window [mem 0xfb100000-0xfb1fffff] [ 0.774266] pci 0000:00:1c.4: bridge window [mem 0x90000000-0x900fffff 64bit pref] [ 0.774440] pci_bus 0000:00: Some PCI device resources are unassigned, try booting with pci=realloc [ 0.774605] pci_bus 0000:00: resource 4 [io 0x0000-0x0cf7 window] [ 0.774741] pci_bus 0000:00: resource 5 [io 0x1000-0xffff window] [ 0.774861] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff window] [ 0.774982] pci_bus 0000:00: resource 7 [mem 0x90000000-0xfbffbfff window] [ 0.775108] pci_bus 0000:03: resource 1 [mem 0xfb500000-0xfb5fffff] [ 0.775228] pci_bus 0000:04: resource 1 [mem 0xfb400000-0xfb4fffff] [ 0.775347] pci_bus 0000:04: resource 2 [mem 0xfba00000-0xfbefffff 64bit pref] [ 0.775493] pci_bus 0000:07: resource 0 [io 0xe000-0xefff] [ 0.775630] pci_bus 0000:07: resource 1 [mem 0xfb300000-0xfb3fffff] [ 0.775756] pci_bus 0000:08: resource 0 [io 0xd000-0xdfff] [ 0.775872] pci_bus 0000:08: resource 1 [mem 0xfb200000-0xfb2fffff] [ 0.775996] pci_bus 0000:09: resource 0 [io 0xc000-0xcfff] [ 0.776113] pci_bus 0000:09: resource 1 [mem 0xfa000000-0xfb0fffff] [ 0.776232] pci_bus 0000:0a: resource 0 [io 0xc000-0xcfff] [ 0.776349] pci_bus 0000:0a: resource 1 [mem 0xfa000000-0xfb0fffff] [ 0.776474] pci_bus 0000:0b: resource 0 [io 0xb000-0xbfff] [ 0.776604] pci_bus 0000:0b: resource 1 [mem 0xfb100000-0xfb1fffff] [ 0.776724] pci_bus 0000:0b: resource 2 [mem 0x90000000-0x900fffff 64bit pref] [ 0.777276] pci 0000:00:05.0: disabled boot interrupts on device [8086:6f28] [ 0.777500] xen: registering gsi 19 triggering 0 polarity 1 [ 0.777527] xen: --> pirq=19 -> irq=19 (gsi=19) [ 0.786298] xen: registering gsi 18 triggering 0 polarity 1 [ 0.786320] xen: --> pirq=18 -> irq=18 (gsi=18) [ 0.801856] pci 0000:00:1a.0: quirk_usb_early_handoff+0x0/0x720 took 15245 usecs [ 0.802125] xen: registering gsi 18 triggering 0 polarity 1 [ 0.802132] Already setup the GSI :18 [ 0.817842] pci 0000:00:1d.0: quirk_usb_early_handoff+0x0/0x720 took 15410 usecs [ 0.818060] pci 0000:04:00.0: CLS mismatch (64 != 32), using 64 bytes [ 0.818206] PCI-DMA: Using software bounce buffering for IO (SWIOTLB) [ 0.818276] Unpacking initramfs... [ 0.818325] software IO TLB: mapped [mem 0x000000001b180000-0x000000001f180000] (64MB) [ 0.818689] kvm: no hardware support for 'kvm_intel' [ 0.826471] has_svm: not amd or hygon [ 0.826607] kvm: no hardware support for 'kvm_amd' [ 0.826725] clocksource: tsc: mask: 0xffffffffffffffff max_cycles: 0x1fb62f12e8c, max_idle_ns: 440795238402 ns [ 0.826954] clocksource: Switched to clocksource tsc [ 0.829587] Initialise system trusted keyrings [ 0.829888] workingset: timestamp_bits=62 max_order=17 bucket_order=0 [ 0.831418] NFS: Registering the id_resolver key type [ 0.831543] Key type id_resolver registered [ 0.831670] Key type id_legacy registered [ 0.831854] 9p: Installing v9fs 9p2000 file system support [ 0.845892] Key type asymmetric registered [ 0.846020] Asymmetric key parser 'x509' registered [ 0.846158] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 251) [ 0.846315] io scheduler mq-deadline registered [ 0.846429] io scheduler kyber registered [ 0.847287] xen: registering gsi 16 triggering 0 polarity 1 [ 0.847318] xen: --> pirq=16 -> irq=16 (gsi=16) [ 0.847882] xen: registering gsi 16 triggering 0 polarity 1 [ 0.847887] Already setup the GSI :16 [ 0.848497] xen: registering gsi 16 triggering 0 polarity 1 [ 0.848502] Already setup the GSI :16 [ 0.848850] xen: registering gsi 16 triggering 0 polarity 1 [ 0.848854] Already setup the GSI :16 [ 0.849178] xen: registering gsi 16 triggering 0 polarity 1 [ 0.849182] Already setup the GSI :16 [ 0.849806] xen: registering gsi 16 triggering 0 polarity 1 [ 0.849811] Already setup the GSI :16 [ 0.850423] xen: registering gsi 16 triggering 0 polarity 1 [ 0.850428] Already setup the GSI :16 [ 0.850888] xen: registering gsi 17 triggering 0 polarity 1 [ 0.850905] xen: --> pirq=17 -> irq=17 (gsi=17) [ 0.851251] xen: registering gsi 19 triggering 0 polarity 1 [ 0.851256] Already setup the GSI :19 [ 0.851724] xen: registering gsi 16 triggering 0 polarity 1 [ 0.851729] Already setup the GSI :16 [ 0.852392] input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input0 [ 0.852567] ACPI: button: Power Button [PWRB] [ 0.852756] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input1 [ 0.853280] ACPI: button: Power Button [PWRF] [ 0.853558] Monitor-Mwait will be used to enter C-1 state [ 0.853591] Monitor-Mwait will be used to enter C-2 state [ 0.853618] ACPI: \_SB_.SCK0.CP00: Found 2 idle states [ 0.854085] ACPI: \_SB_.SCK0.CP01: Found 2 idle states [ 0.854411] ACPI: \_SB_.SCK0.CP02: Found 2 idle states [ 0.854917] ACPI: \_SB_.SCK0.CP03: Found 2 idle states [ 0.855401] ACPI: \_SB_.SCK0.CP04: Found 2 idle states [ 0.855792] ACPI: \_SB_.SCK0.CP05: Found 2 idle states [ 0.856153] ACPI: \_SB_.SCK0.CP06: Found 2 idle states [ 0.856725] ACPI: \_SB_.SCK0.CP07: Found 2 idle states [ 0.857520] xen:xen_evtchn: Event-channel device installed [ 0.857736] xen_pciback: backend is vpci [ 0.858446] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled [ 0.858798] 00:04: ttyS1 at I/O 0x2f8 (irq = 3, base_baud = 115200) is a 16550A [ 0.859498] hpet_acpi_add: no address or irqs in _CRS [ 0.859715] Non-volatile memory driver v1.3 [ 0.859829] AMD-Vi: AMD IOMMUv2 functionality not available on this system - This is not a bug. [ 0.862502] loop: module loaded [ 0.868936] ahci 0000:00:1f.2: version 3.0 [ 0.869040] xen: registering gsi 16 triggering 0 polarity 1 [ 0.869051] Already setup the GSI :16 [ 0.869423] ahci 0000:00:1f.2: AHCI 0001.0300 32 slots 6 ports 6 Gbps 0x3f impl SATA mode [ 0.869575] ahci 0000:00:1f.2: flags: 64bit ncq led clo pio ems apst [ 0.885261] scsi host0: ahci [ 0.885652] scsi host1: ahci [ 0.886062] scsi host2: ahci [ 0.886437] scsi host3: ahci [ 0.886848] scsi host4: ahci [ 0.887234] scsi host5: ahci [ 0.887394] ata1: SATA max UDMA/133 abar m2048@0xfb612000 port 0xfb612100 irq 75 [ 0.887542] ata2: SATA max UDMA/133 abar m2048@0xfb612000 port 0xfb612180 irq 75 [ 0.887698] ata3: SATA max UDMA/133 abar m2048@0xfb612000 port 0xfb612200 irq 75 [ 0.887843] ata4: SATA max UDMA/133 abar m2048@0xfb612000 port 0xfb612280 irq 75 [ 0.887988] ata5: SATA max UDMA/133 abar m2048@0xfb612000 port 0xfb612300 irq 75 [ 0.888132] ata6: SATA max UDMA/133 abar m2048@0xfb612000 port 0xfb612380 irq 75 [ 0.888565] tun: Universal TUN/TAP device driver, 1.6 [ 0.888911] e100: Intel(R) PRO/100 Network Driver [ 0.889050] e100: Copyright(c) 1999-2006 Intel Corporation [ 0.889194] sky2: driver version 1.30 [ 0.889382] xen_netfront: Initialising Xen virtual ethernet driver [ 0.889794] xen: registering gsi 18 triggering 0 polarity 1 [ 0.889804] Already setup the GSI :18 [ 0.890016] ehci-pci 0000:00:1a.0: EHCI Host Controller [ 0.890206] ehci-pci 0000:00:1a.0: new USB bus registered, assigned bus number 1 [ 0.890384] ehci-pci 0000:00:1a.0: debug port 2 [ 0.894539] ehci-pci 0000:00:1a.0: irq 18, io mem 0xfb614000 [ 0.901657] ehci-pci 0000:00:1a.0: USB 2.0 started, EHCI 1.00 [ 0.901899] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 6.01 [ 0.902048] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 0.902193] usb usb1: Product: EHCI Host Controller [ 0.902308] usb usb1: Manufacturer: Linux 6.1.95+ ehci_hcd [ 0.902424] usb usb1: SerialNumber: 0000:00:1a.0 [ 0.902761] hub 1-0:1.0: USB hub found [ 0.902887] hub 1-0:1.0: 2 ports detected [ 0.903253] xen: registering gsi 18 triggering 0 polarity 1 [ 0.903263] Already setup the GSI :18 [ 0.903458] ehci-pci 0000:00:1d.0: EHCI Host Controller [ 0.903673] ehci-pci 0000:00:1d.0: new USB bus registered, assigned bus number 2 [ 0.903851] ehci-pci 0000:00:1d.0: debug port 2 [ 0.907954] ehci-pci 0000:00:1d.0: irq 18, io mem 0xfb613000 [ 0.914667] ehci-pci 0000:00:1d.0: USB 2.0 started, EHCI 1.00 [ 0.914896] usb usb2: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 6.01 [ 0.915045] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 0.915194] usb usb2: Product: EHCI Host Controller [ 0.915309] usb usb2: Manufacturer: Linux 6.1.95+ ehci_hcd [ 0.915425] usb usb2: SerialNumber: 0000:00:1d.0 [ 0.915709] hub 2-0:1.0: USB hub found [ 0.915835] hub 2-0:1.0: 2 ports detected [ 0.916284] xen: registering gsi 19 triggering 0 polarity 1 [ 0.916294] Already setup the GSI :19 [ 0.916505] xhci_hcd 0000:00:14.0: xHCI Host Controller [ 0.916716] xhci_hcd 0000:00:14.0: new USB bus registered, assigned bus number 3 [ 0.917939] xhci_hcd 0000:00:14.0: hcc params 0x200077c1 hci version 0x100 quirks 0x0000000000009810 [ 0.918414] xhci_hcd 0000:00:14.0: xHCI Host Controller [ 0.918625] xhci_hcd 0000:00:14.0: new USB bus registered, assigned bus number 4 [ 0.918774] xhci_hcd 0000:00:14.0: Host supports USB 3.0 SuperSpeed [ 0.918978] usb usb3: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 6.01 [ 0.919127] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 0.919274] usb usb3: Product: xHCI Host Controller [ 0.919408] usb usb3: Manufacturer: Linux 6.1.95+ xhci-hcd [ 0.919524] usb usb3: SerialNumber: 0000:00:14.0 [ 0.919849] hub 3-0:1.0: USB hub found [ 0.919982] hub 3-0:1.0: 8 ports detected [ 0.921100] usb usb4: New USB device found, idVendor=1d6b, idProduct=0003, bcdDevice= 6.01 [ 0.921252] usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 0.921397] usb usb4: Product: xHCI Host Controller [ 0.921513] usb usb4: Manufacturer: Linux 6.1.95+ xhci-hcd [ 0.921644] usb usb4: SerialNumber: 0000:00:14.0 [ 0.921937] hub 4-0:1.0: USB hub found [ 0.922082] hub 4-0:1.0: 6 ports detected [ 0.923332] usbcore: registered new interface driver usblp [ 0.923488] usbcore: registered new interface driver usb-storage [ 0.923712] i8042: PNP: No PS/2 controller found. [ 0.924010] Freeing initrd memory: 19884K [ 0.924047] rtc_cmos 00:00: RTC can wake from S4 [ 0.924767] rtc_cmos 00:00: registered as rtc0 [ 0.924934] rtc_cmos 00:00: alarms up to one month, y3k, 114 bytes nvram [ 0.925137] device-mapper: uevent: version 1.0.3 [ 0.925243] xen: registering gsi 18 triggering 0 polarity 1 [ 0.925260] Already setup the GSI :18 [ 0.925347] device-mapper: ioctl: 4.47.0-ioctl (2022-07-28) initialised: dm-devel@redhat.com [ 0.925411] i801_smbus 0000:00:1f.3: SPD Write Disable is set [ 0.925528] intel_pstate: CPU model not supported [ 0.925559] i801_smbus 0000:00:1f.3: SMBus using PCI interrupt [ 0.925674] hid: raw HID events driver (C) Jiri Kosina [ 0.926128] usbcore: registered new interface driver usbhid [ 0.926202] i2c i2c-0: 1/4 memory slots populated (from DMI) [ 0.926253] usbhid: USB HID core driver [ 0.926671] Initializing XFRM netlink socket [ 0.926879] NET: Registered PF_INET6 protocol family [ 0.927500] Segment Routing with IPv6 [ 0.927650] In-situ OAM (IOAM) with IPv6 [ 0.927796] sit: IPv6, IPv4 and MPLS over IPv4 tunneling driver [ 0.928040] NET: Registered PF_PACKET protocol family [ 0.928195] 9pnet: Installing 9P2000 support [ 0.928321] Key type dns_resolver registered [ 0.929058] IPI shorthand broadcast: enabled [ 0.929197] sched_clock: Marking stable (891419937, 37598068)->(1777115884, -848097879) [ 0.929789] registered taskstats version 1 [ 0.929905] Loading compiled-in X.509 certificates [ 0.932554] PM: Magic number: 12:940:361 [ 0.932718] msr msr0: hash matches [ 0.932912] printk: console [netcon0] enabled [ 0.933027] netconsole: network logging started [ 0.933365] cfg80211: Loading compiled-in X.509 certificates for regulatory database [ 0.945452] cfg80211: Loaded X.509 cert 'sforshee: 00b28ddf47aef9cea7' [ 0.945840] cfg80211: Loaded X.509 cert 'wens: 61c038651aabdcf94bd0ac7ff06c7248db18c600' [ 0.946499] cfg80211: loaded regulatory.db is malformed or signature is missing/invalid [ 0.946709] ALSA device list: [ 0.946834] No soundcards found. [ 1.143686] usb 1-1: new high-speed USB device number 2 using ehci-pci [ 1.151719] usb 2-1: new high-speed USB device number 2 using ehci-pci [ 1.159653] usb 3-3: new high-speed USB device number 2 using xhci_hcd [ 1.196540] ata2: SATA link down (SStatus 0 SControl 300) [ 1.196911] ata6: SATA link down (SStatus 0 SControl 300) [ 1.197070] ata3: SATA link up 6.0 Gbps (SStatus 133 SControl 300) [ 1.197211] ata5: SATA link down (SStatus 0 SControl 300) [ 1.197367] ata4: SATA link down (SStatus 0 SControl 300) [ 1.197508] ata1: SATA link down (SStatus 0 SControl 300) [ 1.198314] ata3.00: ATA-10: HGST HUS722T1TALA604, RAGNWA05, max UDMA/133 [ 1.272112] usb 1-1: New USB device found, idVendor=8087, idProduct=8008, bcdDevice= 0.05 [ 1.272267] usb 1-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0 [ 1.272661] hub 1-1:1.0: USB hub found [ 1.272876] hub 1-1:1.0: 4 ports detected [ 1.280112] usb 2-1: New USB device found, idVendor=8087, idProduct=8000, bcdDevice= 0.05 [ 1.280267] usb 2-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0 [ 1.280658] hub 2-1:1.0: USB hub found [ 1.280861] hub 2-1:1.0: 4 ports detected [ 1.287292] usb 3-3: New USB device found, idVendor=05e3, idProduct=0610, bcdDevice=32.98 [ 1.287447] usb 3-3: New USB device strings: Mfr=0, Product=1, SerialNumber=0 [ 1.287489] ata3.00: 1953525168 sectors, multi 16: LBA48 NCQ (depth 32), AA [ 1.287571] usb 3-3: Product: USB2.0 Hub [ 1.287582] ata3.00: Features: NCQ-sndrcv NCQ-prio [ 1.288285] hub 3-3:1.0: USB hub found [ 1.288772] hub 3-3:1.0: 4 ports detected [ 1.315291] ata3.00: configured for UDMA/133 [ 1.315535] scsi 2:0:0:0: Direct-Access ATA HGST HUS722T1TAL WA05 PQ: 0 ANSI: 5 [ 1.316156] sd 2:0:0:0: Attached scsi generic sg0 type 0 [ 1.316237] sd 2:0:0:0: [sda] 1953525168 512-byte logical blocks: (1.00 TB/932 GiB) [ 1.316489] sd 2:0:0:0: [sda] Write Protect is off [ 1.316632] sd 2:0:0:0: [sda] Mode Sense: 00 3a 00 00 [ 1.316695] sd 2:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 1.316928] sd 2:0:0:0: [sda] Preferred minimum I/O size 512 bytes [ 1.336673] sda: sda1 sda2 < sda5 > [ 1.337052] sd 2:0:0:0: [sda] Attached SCSI disk [ 1.338244] Freeing unused kernel image (initmem) memory: 1576K [ 1.338373] Write protecting the kernel read-only data: 22528k [ 1.356614] Freeing unused kernel image (text/rodata gap) memory: 2032K [ 1.357912] Freeing unused kernel image (rodata/data gap) memory: 1568K [ 1.404621] usb 3-4: new high-speed USB device number 3 using xhci_hcd [ 1.530962] usb 3-4: New USB device found, idVendor=0557, idProduct=7000, bcdDevice= 0.00 [ 1.531118] usb 3-4: New USB device strings: Mfr=0, Product=0, SerialNumber=0 [ 1.531738] hub 3-4:1.0: USB hub found [ 1.531951] hub 3-4:1.0: 4 ports detected [ 1.594659] usb 3-3.2: new high-speed USB device number 4 using xhci_hcd [ 1.672133] usb 3-3.2: New USB device found, idVendor=05e3, idProduct=0610, bcdDevice=32.98 [ 1.672294] usb 3-3.2: New USB device strings: Mfr=0, Product=1, SerialNumber=0 [ 1.672440] usb 3-3.2: Product: USB2.0 Hub [ 1.673103] hub 3-3.2:1.0: USB hub found [ 1.673582] hub 3-3.2:1.0: 4 ports detected [ 1.819020] x86/mm: Checked W+X mappings: passed, no W+X pages found. [ 1.819147] Run /init as init process [ 1.819265] with arguments: [ 1.819266] /init [ 1.819267] placeholder [ 1.819268] with environment: [ 1.819269] HOME=/ [ 1.819270] TERM=linux [ 1.826634] usb 3-4.1: new low-speed USB device number 5 using xhci_hcd [ 1.931013] usb 3-4.1: New USB device found, idVendor=0557, idProduct=2419, bcdDevice= 1.00 [ 1.931175] usb 3-4.1: New USB device strings: Mfr=0, Product=0, SerialNumber=0 [ 1.936978] input: HID 0557:2419 as /devices/pci0000:00/0000:00:14.0/usb3/3-4/3-4.1/3-4.1:1.0/0003:0557:2419.0001/input/input2 [ 1.989038] hid-generic 0003:0557:2419.0001: input,hidraw0: USB HID v1.00 Keyboard [HID 0557:2419] on usb-0000:00:14.0-4.1/input0 [ 1.991966] input: HID 0557:2419 as /devices/pci0000:00/0000:00:14.0/usb3/3-4/3-4.1/3-4.1:1.1/0003:0557:2419.0002/input/input3 [ 1.992303] hid-generic 0003:0557:2419.0002: input,hidraw1: USB HID v1.00 Mouse [HID 0557:2419] on usb-0000:00:14.0-4.1/input1 [ 2.268135] ixgbe: Intel(R) 10 Gigabit PCI Express Network Driver [ 2.268306] ixgbe: Copyright (c) 1999-2016 Intel Corporation. [ 2.268789] ACPI Warning: \_SB.PCI0.BR2C._PRT: Return Package has no elements (empty) (20220331/nsprepkg-94) [ 2.269007] xen: registering gsi 16 triggering 0 polarity 1 [ 2.269016] Already setup the GSI :16 [ 2.272988] igb: Intel(R) Gigabit Ethernet Network Driver [ 2.273116] igb: Copyright (c) 2007-2014 Intel Corporation. [ 2.273328] xen: registering gsi 16 triggering 0 polarity 1 [ 2.273337] Already setup the GSI :16 [ 2.300825] pps pps0: new PPS source ptp0 [ 2.301013] igb 0000:07:00.0: added PHC on eth0 [ 2.301148] igb 0000:07:00.0: Intel(R) Gigabit Ethernet Network Connection [ 2.301269] igb 0000:07:00.0: eth0: (PCIe:2.5Gb/s:Width x1) 0c:c4:7a:9f:87:be [ 2.301436] igb 0000:07:00.0: eth0: PBA No: 010C00-000 [ 2.301552] igb 0000:07:00.0: Using MSI-X interrupts. 4 rx queue(s), 4 tx queue(s) [ 2.301800] xen: registering gsi 17 triggering 0 polarity 1 [ 2.301809] Already setup the GSI :17 [ 2.331300] pps pps1: new PPS source ptp1 [ 2.331508] igb 0000:08:00.0: added PHC on eth1 [ 2.331680] igb 0000:08:00.0: Intel(R) Gigabit Ethernet Network Connection [ 2.331803] igb 0000:08:00.0: eth1: (PCIe:2.5Gb/s:Width x1) 0c:c4:7a:9f:87:bf [ 2.331969] igb 0000:08:00.0: eth1: PBA No: 010000-000 [ 2.332085] igb 0000:08:00.0: Using MSI-X interrupts. 4 rx queue(s), 4 tx queue(s) [ 2.332351] xen: registering gsi 16 triggering 0 polarity 1 [ 2.332360] Already setup the GSI :16 [ 2.390576] igb 0000:0b:00.0: added PHC on eth2 [ 2.390729] igb 0000:0b:00.0: Intel(R) Gigabit Ethernet Network Connection [ 2.390851] igb 0000:0b:00.0: eth2: (PCIe:5.0Gb/s:Width x4) 0c:c4:7a:9f:87:c0 [ 2.391055] igb 0000:0b:00.0: eth2: PBA No: 010000-000 [ 2.391172] igb 0000:0b:00.0: Using MSI-X interrupts. 8 rx queue(s), 8 tx queue(s) [ 2.391400] xen: registering gsi 17 triggering 0 polarity 1 [ 2.391410] Already setup the GSI :17 [ 2.449912] igb 0000:0b:00.1: added PHC on eth3 [ 2.450051] igb 0000:0b:00.1: Intel(R) Gigabit Ethernet Network Connection [ 2.450180] igb 0000:0b:00.1: eth3: (PCIe:5.0Gb/s:Width x4) 0c:c4:7a:9f:87:c1 [ 2.450384] igb 0000:0b:00.1: eth3: PBA No: 010000-000 [ 2.450500] igb 0000:0b:00.1: Using MSI-X interrupts. 8 rx queue(s), 8 tx queue(s) [ 2.450733] xen: registering gsi 18 triggering 0 polarity 1 [ 2.450742] Already setup the GSI :18 [ 2.508273] igb 0000:0b:00.2: added PHC on eth4 [ 2.508426] igb 0000:0b:00.2: Intel(R) Gigabit Ethernet Network Connection [ 2.508548] igb 0000:0b:00.2: eth4: (PCIe:5.0Gb/s:Width x4) 0c:c4:7a:9f:87:c2 [ 2.508780] igb 0000:0b:00.2: eth4: PBA No: 010000-000 [ 2.508898] igb 0000:0b:00.2: Using MSI-X interrupts. 8 rx queue(s), 8 tx queue(s) [ 2.509143] xen: registering gsi 19 triggering 0 polarity 1 [ 2.509152] Already setup the GSI :19 [ 2.566873] igb 0000:0b:00.3: added PHC on eth5 [ 2.567016] igb 0000:0b:00.3: Intel(R) Gigabit Ethernet Network Connection [ 2.567138] igb 0000:0b:00.3: eth5: (PCIe:5.0Gb/s:Width x4) 0c:c4:7a:9f:87:c3 [ 2.567342] igb 0000:0b:00.3: eth5: PBA No: 010000-000 [ 2.567458] igb 0000:0b:00.3: Using MSI-X interrupts. 8 rx queue(s), 8 tx queue(s) [ 2.570648] igb 0000:07:00.0 enx0cc47a9f87be: renamed from eth0 [ 2.585205] igb 0000:08:00.0 enx0cc47a9f87bf: renamed from eth1 [ 2.592794] igb 0000:0b:00.0 enx0cc47a9f87c0: renamed from eth2 [ 2.604853] igb 0000:0b:00.1 enx0cc47a9f87c1: renamed from eth3 [ 2.617959] igb 0000:0b:00.2 enx0cc47a9f87c2: renamed from eth4 [ 2.626973] igb 0000:0b:00.3 enx0cc47a9f87c3: renamed from eth5 [ 3.012317] ixgbe 0000:04:00.0: Multiqueue Enabled: Rx Queue count = 8, Tx Queue count = 8 XDP Queue count = 0 [ 3.142028] ixgbe 0000:04:00.0: MAC: 5, PHY: 0, PBA No: 020B00-000 [ 3.142164] ixgbe 0000:04:00.0: 0c:c4:7a:9f:8f:b6 [ 3.435813] ixgbe 0000:04:00.0: Intel(R) 10 Gigabit Network Connection [ 3.436219] ACPI Warning: \_SB.PCI0.BR2C._PRT: Return Package has no elements (empty) (20220331/nsprepkg-94) [ 3.436436] xen: registering gsi 17 triggering 0 polarity 1 [ 3.436446] Already setup the GSI :17 [ 4.176693] ixgbe 0000:04:00.1: Multiqueue Enabled: Rx Queue count = 8, Tx Queue count = 8 XDP Queue count = 0 [ 4.308436] ixgbe 0000:04:00.1: MAC: 5, PHY: 0, PBA No: 020B00-000 [ 4.308675] ixgbe 0000:04:00.1: 0c:c4:7a:9f:8f:b7 [ 4.603615] ixgbe 0000:04:00.1: Intel(R) 10 Gigabit Network Connection [ 4.606129] ixgbe 0000:04:00.1 enx0cc47a9f8fb7: renamed from eth1 [ 4.614142] ixgbe 0000:04:00.0 enx0cc47a9f8fb6: renamed from eth0 [ 5.021475] EXT4-fs (dm-0): mounting ext3 file system using the ext4 subsystem [ 5.028934] EXT4-fs (dm-0): mounted filesystem with ordered data mode. Quota mode: none. [ 8.483919] EXT4-fs (dm-0): re-mounted. Quota mode: none. [ 9.642554] EXT4-fs (sda1): mounting ext3 file system using the ext4 subsystem [ 9.646247] EXT4-fs (sda1): mounted filesystem with ordered data mode. Quota mode: none. [ 9.735494] Adding 1949692k swap on /dev/mapper/debina0--vg-swap_1. Priority:-2 extents:1 across:1949692k [ 11.248499] xenbr0: port 1(enx0cc47a9f87be) entered blocking state [ 11.248691] xenbr0: port 1(enx0cc47a9f87be) entered disabled state [ 11.248901] device enx0cc47a9f87be entered promiscuous mode [ 14.795274] igb 0000:07:00.0 enx0cc47a9f87be: igb: enx0cc47a9f87be NIC Link is Up 1000 Mbps Full Duplex, Flow Control: RX [ 14.902012] IPv6: ADDRCONF(NETDEV_CHANGE): enx0cc47a9f87be: link becomes ready [ 14.902296] xenbr0: port 1(enx0cc47a9f87be) entered blocking state [ 14.902421] xenbr0: port 1(enx0cc47a9f87be) entered forwarding state [ 14.902717] IPv6: ADDRCONF(NETDEV_CHANGE): xenbr0: link becomes ready