[ 0.000000] Linux version 6.1.95+ (osstest@himrod0) (gcc (Debian 12.2.0-14) 12.2.0, GNU ld (GNU Binutils for Debian) 2.40) #1 SMP PREEMPT_DYNAMIC Mon Jun 24 03:03:40 UTC 2024 [ 0.000000] Command line: placeholder root=/dev/mapper/debina0--vg-root ro console=hvc0 [ 0.000000] Released 0 page(s) [ 0.000000] BIOS-provided physical RAM map: [ 0.000000] Xen: [mem 0x0000000000000000-0x0000000000099fff] usable [ 0.000000] Xen: [mem 0x000000000009ac00-0x00000000000fffff] reserved [ 0.000000] Xen: [mem 0x0000000000100000-0x0000000020065fff] usable [ 0.000000] Xen: [mem 0x00000000796ef000-0x00000000798bdfff] reserved [ 0.000000] Xen: [mem 0x00000000799b7000-0x0000000079e5afff] ACPI NVS [ 0.000000] Xen: [mem 0x0000000079e5b000-0x000000007bdb0fff] reserved [ 0.000000] Xen: [mem 0x000000007bdb2000-0x000000007be37fff] reserved [ 0.000000] Xen: [mem 0x0000000080000000-0x000000008fffffff] reserved [ 0.000000] Xen: [mem 0x00000000fbffc000-0x00000000fbffcfff] reserved [ 0.000000] Xen: [mem 0x00000000fec00000-0x00000000fec00fff] reserved [ 0.000000] Xen: [mem 0x00000000fed1c000-0x00000000fed1ffff] reserved [ 0.000000] Xen: [mem 0x00000000fee00000-0x00000000feefffff] reserved [ 0.000000] Xen: [mem 0x00000000ff000000-0x00000000ffffffff] reserved [ 0.000000] NX (Execute Disable) protection: active [ 0.000000] SMBIOS 2.8 present. [ 0.000000] DMI: Supermicro SYS-5018D-FN8T/X10SDV-TP8F, BIOS 1.0b 11/21/2016 [ 0.000000] Hypervisor detected: Xen PV [ 0.000459] tsc: Detected 2199.996 MHz processor [ 0.000902] e820: update [mem 0x00000000-0x00000fff] usable ==> reserved [ 0.000906] e820: remove [mem 0x000a0000-0x000fffff] usable [ 0.000912] last_pfn = 0x20066 max_arch_pfn = 0x400000000 [ 0.000914] Disabled [ 0.000915] x86/PAT: MTRRs disabled, skipping PAT initialization too. [ 0.000919] x86/PAT: Configuration [0-7]: WB WT UC- UC WC WP UC UC [ 0.000958] Kernel/User page tables isolation: disabled on XEN PV. [ 0.027703] RAMDISK: [mem 0x04000000-0x0536afff] [ 0.027712] ACPI: Early table checksum verification disabled [ 0.028312] ACPI: RSDP 0x00000000000F0580 000024 (v02 SUPERM) [ 0.028324] ACPI: XSDT 0x00000000799FF098 0000B4 (v01 SUPERM SMCI--MB 01072009 AMI 00010013) [ 0.028361] ACPI: FACP 0x0000000079A17AC0 00010C (v05 SUPERM SMCI--MB 01072009 AMI 00010013) [ 0.028409] ACPI: DSDT 0x00000000799FF1E8 0188D5 (v02 SUPERM SMCI--MB 01072009 INTL 20091013) [ 0.028425] ACPI: FACS 0x0000000079E59F80 000040 [ 0.028441] ACPI: APIC 0x0000000079A17BD0 0000BC (v03 SUPERM SMCI--MB 01072009 AMI 00010013) [ 0.028457] ACPI: FPDT 0x0000000079A17C90 000044 (v01 SUPERM SMCI--MB 01072009 AMI 00010013) [ 0.028473] ACPI: FIDT 0x0000000079A17CD8 00009C (v01 SUPERM SMCI--MB 01072009 AMI 00010013) [ 0.028488] ACPI: MCFG 0x0000000079A17D78 00003C (v01 SUPERM SMCI--MB 01072009 MSFT 00000097) [ 0.028504] ACPI: UEFI 0x0000000079A17DB8 000042 (v01 00000000 00000000) [ 0.028521] ACPI: DBG2 0x0000000079A17E00 000072 (v00 SUPERM SMCI--MB 00000000 INTL 20091013) [ 0.028537] ACPI: HPET 0x0000000079A17E78 000038 (v01 SUPERM SMCI--MB 00000001 INTL 20091013) [ 0.028553] ACPI: WDDT 0x0000000079A17EB0 000040 (v01 SUPERM SMCI--MB 00000000 INTL 20091013) [ 0.028569] ACPI: SSDT 0x0000000079A17EF0 00ED8B (v01 AMI PmMgt 00000001 INTL 20120913) [ 0.028589] ACPI: SSDT 0x0000000079A26C80 002285 (v02 SUPERM SpsNm 00000002 INTL 20120913) [ 0.028605] ACPI: SSDT 0x0000000079A28F08 000064 (v02 SUPERM SpsNvs 00000002 INTL 20120913) [ 0.028621] ACPI: PRAD 0x0000000079A28F70 000102 (v02 SUPERM SMCI--MB 00000002 INTL 20120913) [ 0.028637] ACPI: RMAD 0x0000000079A29078 0000CC (v01 SUPERM SMCI--MB 00000001 INTL 20091013) [ 0.028653] ACPI: HEST 0x0000000079A29148 0000A8 (v01 SUPERM SMCI--MB 00000001 INTL 00000001) [ 0.028669] ACPI: BERT 0x0000000079A291F0 000030 (v01 SUPERM SMCI--MB 00000001 INTL 00000001) [ 0.028685] ACPI: ERST 0x0000000079A29220 000230 (v01 SUPERM SMCI--MB 00000001 INTL 00000001) [ 0.028701] ACPI: EINJ 0x0000000079A29450 000130 (v01 SUPERM SMCI--MB 00000001 INTL 00000001) [ 0.028709] ACPI: Reserving FACP table memory at [mem 0x79a17ac0-0x79a17bcb] [ 0.028711] ACPI: Reserving DSDT table memory at [mem 0x799ff1e8-0x79a17abc] [ 0.028712] ACPI: Reserving FACS table memory at [mem 0x79e59f80-0x79e59fbf] [ 0.028713] ACPI: Reserving APIC table memory at [mem 0x79a17bd0-0x79a17c8b] [ 0.028714] ACPI: Reserving FPDT table memory at [mem 0x79a17c90-0x79a17cd3] [ 0.028715] ACPI: Reserving FIDT table memory at [mem 0x79a17cd8-0x79a17d73] [ 0.028716] ACPI: Reserving MCFG table memory at [mem 0x79a17d78-0x79a17db3] [ 0.028717] ACPI: Reserving UEFI table memory at [mem 0x79a17db8-0x79a17df9] [ 0.028718] ACPI: Reserving DBG2 table memory at [mem 0x79a17e00-0x79a17e71] [ 0.028719] ACPI: Reserving HPET table memory at [mem 0x79a17e78-0x79a17eaf] [ 0.028719] ACPI: Reserving WDDT table memory at [mem 0x79a17eb0-0x79a17eef] [ 0.028720] ACPI: Reserving SSDT table memory at [mem 0x79a17ef0-0x79a26c7a] [ 0.028721] ACPI: Reserving SSDT table memory at [mem 0x79a26c80-0x79a28f04] [ 0.028722] ACPI: Reserving SSDT table memory at [mem 0x79a28f08-0x79a28f6b] [ 0.028723] ACPI: Reserving PRAD table memory at [mem 0x79a28f70-0x79a29071] [ 0.028724] ACPI: Reserving RMAD table memory at [mem 0x79a29078-0x79a29143] [ 0.028725] ACPI: Reserving HEST table memory at [mem 0x79a29148-0x79a291ef] [ 0.028726] ACPI: Reserving BERT table memory at [mem 0x79a291f0-0x79a2921f] [ 0.028727] ACPI: Reserving ERST table memory at [mem 0x79a29220-0x79a2944f] [ 0.028728] ACPI: Reserving EINJ table memory at [mem 0x79a29450-0x79a2957f] [ 0.028775] Setting APIC routing to Xen PV. [ 0.032717] Zone ranges: [ 0.032718] DMA [mem 0x0000000000001000-0x0000000000ffffff] [ 0.032721] DMA32 [mem 0x0000000001000000-0x0000000020065fff] [ 0.032722] Normal empty [ 0.032724] Movable zone start for each node [ 0.032724] Early memory node ranges [ 0.032725] node 0: [mem 0x0000000000001000-0x0000000000099fff] [ 0.032727] node 0: [mem 0x0000000000100000-0x0000000020065fff] [ 0.032728] Initmem setup node 0 [mem 0x0000000000001000-0x0000000020065fff] [ 0.032733] On node 0, zone DMA: 1 pages in unavailable ranges [ 0.032770] On node 0, zone DMA: 102 pages in unavailable ranges [ 0.034318] On node 0, zone DMA32: 32666 pages in unavailable ranges [ 0.034323] p2m virtual area at (____ptrval____), size is 40000000 [ 0.221878] Remapped 102 page(s) [ 0.223253] ACPI: PM-Timer IO Port: 0x408 [ 0.223306] ACPI: LAPIC_NMI (acpi_id[0x00] high level lint[0x1]) [ 0.223309] ACPI: LAPIC_NMI (acpi_id[0x02] high level lint[0x1]) [ 0.223310] ACPI: LAPIC_NMI (acpi_id[0x04] high level lint[0x1]) [ 0.223312] ACPI: LAPIC_NMI (acpi_id[0x06] high level lint[0x1]) [ 0.223314] ACPI: LAPIC_NMI (acpi_id[0x01] high level lint[0x1]) [ 0.223315] ACPI: LAPIC_NMI (acpi_id[0x03] high level lint[0x1]) [ 0.223316] ACPI: LAPIC_NMI (acpi_id[0x05] high level lint[0x1]) [ 0.223318] ACPI: LAPIC_NMI (acpi_id[0x07] high level lint[0x1]) [ 0.223346] IOAPIC[0]: apic_id 8, version 32, address 0xfec00000, GSI 0-23 [ 0.223359] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl) [ 0.223362] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level) [ 0.223388] ACPI: Using ACPI (MADT) for SMP configuration information [ 0.223393] ACPI: HPET id: 0x8086a701 base: 0xfed00000 [ 0.223463] smpboot: Allowing 8 CPUs, 0 hotplug CPUs [ 0.223478] PM: hibernation: Registered nosave memory: [mem 0x00000000-0x00000fff] [ 0.223480] PM: hibernation: Registered nosave memory: [mem 0x0009a000-0x0009afff] [ 0.223481] PM: hibernation: Registered nosave memory: [mem 0x0009b000-0x000fffff] [ 0.223483] [mem 0x90000000-0xfbffbfff] available for PCI devices [ 0.223488] Booting kernel on Xen [ 0.223489] Xen version: 4.19-unstable (preserve-AD) [ 0.223492] clocksource: refined-jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 1910969940391419 ns [ 0.229715] setup_percpu: NR_CPUS:64 nr_cpumask_bits:8 nr_cpu_ids:8 nr_node_ids:1 [ 0.229999] percpu: Embedded 54 pages/cpu s180520 r8192 d32472 u262144 [ 0.230006] pcpu-alloc: s180520 r8192 d32472 u262144 alloc=1*2097152 [ 0.230009] pcpu-alloc: [0] 0 1 2 3 4 5 6 7 [ 0.230087] xen: PV spinlocks enabled [ 0.230090] PV qspinlock hash table entries: 256 (order: 0, 4096 bytes, linear) [ 0.230095] Built 1 zonelists, mobility grouping on. Total pages: 129006 [ 0.230098] Kernel command line: placeholder root=/dev/mapper/debina0--vg-root ro console=hvc0 [ 0.230136] Unknown kernel command line parameters "placeholder", will be passed to user space. [ 0.230146] random: crng init done [ 0.230195] Dentry cache hash table entries: 65536 (order: 7, 524288 bytes, linear) [ 0.230220] Inode-cache hash table entries: 32768 (order: 6, 262144 bytes, linear) [ 0.231554] mem auto-init: stack:all(zero), heap alloc:off, heap free:off [ 0.231557] software IO TLB: area num 8. [ 0.294470] Memory: 390032K/524284K available (14349K kernel code, 2682K rwdata, 4576K rodata, 1576K init, 1296K bss, 134000K reserved, 0K cma-reserved) [ 0.294638] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=8, Nodes=1 [ 0.297142] Dynamic Preempt: voluntary [ 0.297241] rcu: Preemptible hierarchical RCU implementation. [ 0.297242] rcu: RCU event tracing is enabled. [ 0.297243] rcu: RCU restricting CPUs from NR_CPUS=64 to nr_cpu_ids=8. [ 0.297245] Trampoline variant of Tasks RCU enabled. [ 0.297246] rcu: RCU calculated value of scheduler-enlistment delay is 100 jiffies. [ 0.297247] rcu: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=8 [ 0.307735] NR_IRQS: 4352, nr_irqs: 488, preallocated irqs: 16 [ 0.307859] xen:events: Using FIFO-based ABI [ 0.307885] xen: --> pirq=1 -> irq=1 (gsi=1) [ 0.307893] xen: --> pirq=2 -> irq=2 (gsi=2) [ 0.307900] xen: --> pirq=3 -> irq=3 (gsi=3) [ 0.307908] xen: --> pirq=4 -> irq=4 (gsi=4) [ 0.307915] xen: --> pirq=5 -> irq=5 (gsi=5) [ 0.307922] xen: --> pirq=6 -> irq=6 (gsi=6) [ 0.307930] xen: --> pirq=7 -> irq=7 (gsi=7) [ 0.307937] xen: --> pirq=8 -> irq=8 (gsi=8) [ 0.307944] xen: --> pirq=9 -> irq=9 (gsi=9) [ 0.307951] xen: --> pirq=10 -> irq=10 (gsi=10) [ 0.307959] xen: --> pirq=11 -> irq=11 (gsi=11) [ 0.307966] xen: --> pirq=12 -> irq=12 (gsi=12) [ 0.307974] xen: --> pirq=13 -> irq=13 (gsi=13) [ 0.307981] xen: --> pirq=14 -> irq=14 (gsi=14) [ 0.307988] xen: --> pirq=15 -> irq=15 (gsi=15) [ 0.307999] rcu: srcu_init: Setting srcu_struct sizes based on contention. [ 0.313373] Console: colour VGA+ 80x25 [ 0.328208] printk: console [tty0] enabled [ 0.329489] printk: console [hvc0] enabled [ 0.329610] ACPI: Core revision 20220331 [ 0.343585] clocksource: xen: mask: 0xffffffffffffffff max_cycles: 0x1cd42e4dffb, max_idle_ns: 881590591483 ns [ 0.343751] Xen: using vcpuop timer interface [ 0.343756] installing Xen timer for CPU 0 [ 0.343899] clocksource: tsc-early: mask: 0xffffffffffffffff max_cycles: 0x1fb62f12e8c, max_idle_ns: 440795238402 ns [ 0.344058] Calibrating delay loop (skipped), value calculated using timer frequency.. 4399.99 BogoMIPS (lpj=2199996) [ 0.344384] Last level iTLB entries: 4KB 64, 2MB 8, 4MB 8 [ 0.344501] Last level dTLB entries: 4KB 64, 2MB 0, 4MB 0, 1GB 4 [ 0.344629] Spectre V1 : Mitigation: usercopy/swapgs barriers and __user pointer sanitization [ 0.344778] Spectre V2 : Mitigation: Retpolines [ 0.345063] Spectre V2 : Spectre v2 / SpectreRSB mitigation: Filling RSB on context switch [ 0.345210] Spectre V2 : Spectre v2 / SpectreRSB : Filling RSB on VMEXIT [ 0.345336] Spectre V2 : Enabling Restricted Speculation for firmware calls [ 0.345457] Spectre V2 : mitigation: Enabling conditional Indirect Branch Prediction Barrier [ 0.345606] Spectre V2 : User space: Mitigation: STIBP via prctl [ 0.345725] Speculative Store Bypass: Mitigation: Speculative Store Bypass disabled via prctl [ 0.345877] MDS: Mitigation: Clear CPU buffers [ 0.345991] TAA: Mitigation: Clear CPU buffers [ 0.346061] MMIO Stale Data: Vulnerable: Clear CPU buffers attempted, no microcode [ 0.346227] x86/fpu: Supporting XSAVE feature 0x001: 'x87 floating point registers' [ 0.346372] x86/fpu: Supporting XSAVE feature 0x002: 'SSE registers' [ 0.346492] x86/fpu: Supporting XSAVE feature 0x004: 'AVX registers' [ 0.346619] x86/fpu: xstate_offset[2]: 576, xstate_sizes[2]: 256 [ 0.346740] x86/fpu: Enabled xstate features 0x7, context size is 832 bytes, using 'standard' format. [ 0.364476] Freeing SMP alternatives memory: 40K [ 0.364609] pid_max: default: 32768 minimum: 301 [ 0.365078] LSM: Security Framework initializing [ 0.365200] SELinux: Initializing. [ 0.365339] Mount-cache hash table entries: 1024 (order: 1, 8192 bytes, linear) [ 0.365486] Mountpoint-cache hash table entries: 1024 (order: 1, 8192 bytes, linear) [ 0.366150] cpu 0 spinlock event irq 25 [ 0.366270] VPMU disabled by hypervisor. [ 0.366702] cblist_init_generic: Setting adjustable number of callback queues. [ 0.366851] cblist_init_generic: Setting shift to 3 and lim to 1. [ 0.367008] Performance Events: unsupported p6 CPU model 86 no PMU driver, software events only. [ 0.367063] signal: max sigframe size: 1776 [ 0.367226] rcu: Hierarchical SRCU implementation. [ 0.367353] rcu: Max phase no-delay instances is 400. [ 0.367846] smp: Bringing up secondary CPUs ... [ 0.368178] installing Xen timer for CPU 1 [ 0.368750] cpu 1 spinlock event irq 35 [ 0.369210] MDS CPU bug present and SMT on, data leak possible. See https://www.kernel.org/doc/html/latest/admin-guide/hw-vuln/mds.html for more details. [ 0.369382] TAA CPU bug present and SMT on, data leak possible. See https://www.kernel.org/doc/html/latest/admin-guide/hw-vuln/tsx_async_abort.html for more details. [ 0.369579] MMIO Stale Data CPU bug present and SMT on, data leak possible. See https://www.kernel.org/doc/html/latest/admin-guide/hw-vuln/processor_mmio_stale_data.html for more details. [ 0.370283] installing Xen timer for CPU 2 [ 0.370730] cpu 2 spinlock event irq 41 [ 0.371134] installing Xen timer for CPU 3 [ 0.371610] cpu 3 spinlock event irq 47 [ 0.371610] installing Xen timer for CPU 4 [ 0.372400] cpu 4 spinlock event irq 53 [ 0.372400] installing Xen timer for CPU 5 [ 0.373245] cpu 5 spinlock event irq 59 [ 0.373273] installing Xen timer for CPU 6 [ 0.374146] cpu 6 spinlock event irq 65 [ 0.374329] installing Xen timer for CPU 7 [ 0.375060] cpu 7 spinlock event irq 71 [ 0.375229] smp: Brought up 1 node, 8 CPUs [ 0.375346] smpboot: Max logical packages: 1 [ 0.375570] devtmpfs: initialized [ 0.375570] x86/mm: Memory block size: 128MB [ 0.376402] ACPI: PM: Registering ACPI NVS region [mem 0x799b7000-0x79e5afff] (4866048 bytes) [ 0.376402] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 1911260446275000 ns [ 0.376484] futex hash table entries: 2048 (order: 5, 131072 bytes, linear) [ 0.377143] PM: RTC time: 04:14:45, date: 2024-06-24 [ 0.377382] NET: Registered PF_NETLINK/PF_ROUTE protocol family [ 0.377525] xen:grant_table: Grant tables using version 1 layout [ 0.377664] Grant table initialized [ 0.377965] audit: initializing netlink subsys (disabled) [ 0.378112] audit: type=2000 audit(1719202485.366:1): state=initialized audit_enabled=0 res=1 [ 0.378131] thermal_sys: Registered thermal governor 'step_wise' [ 0.378131] thermal_sys: Registered thermal governor 'user_space' [ 0.378260] ACPI FADT declares the system doesn't support PCIe ASPM, so disable it [ 0.379096] PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0x80000000-0x8fffffff] (base 0x80000000) [ 0.379253] PCI: MMCONFIG at [mem 0x80000000-0x8fffffff] reserved in E820 [ 0.507959] PCI: Using configuration type 1 for base access [ 0.510602] kprobes: kprobe jump-optimization is enabled. All kprobes are optimized if possible. [ 0.511138] ACPI: Added _OSI(Module Device) [ 0.511257] ACPI: Added _OSI(Processor Device) [ 0.511390] ACPI: Added _OSI(3.0 _SCP Extensions) [ 0.511523] ACPI: Added _OSI(Processor Aggregator Device) [ 0.543387] ACPI: 4 ACPI AML tables successfully acquired and loaded [ 0.545376] xen: registering gsi 9 triggering 0 polarity 0 [ 0.547948] ACPI: Dynamic OEM Table Load: [ 0.557274] ACPI: Interpreter enabled [ 0.557410] ACPI: PM: (supports S0 S4 S5) [ 0.557522] ACPI: Using IOAPIC for interrupt routing [ 0.557669] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug [ 0.557820] PCI: Using E820 reservations for host bridge windows [ 0.558431] ACPI: Enabled 6 GPEs in block 00 to 3F [ 0.594165] ACPI: PCI Root Bridge [UNC0] (domain 0000 [bus ff]) [ 0.594303] acpi PNP0A03:03: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI HPX-Type3] [ 0.594542] acpi PNP0A03:03: _OSC: platform does not support [LTR] [ 0.594985] acpi PNP0A03:03: _OSC: OS now controls [PME PCIeCapability] [ 0.595061] acpi PNP0A03:03: FADT indicates ASPM is unsupported, using BIOS configuration [ 0.595245] PCI host bridge to bus 0000:ff [ 0.595359] pci_bus 0000:ff: root bus resource [bus ff] [ 0.595553] pci 0000:ff:0b.0: [8086:6f81] type 00 class 0x088000 [ 0.596194] pci 0000:ff:0b.1: [8086:6f36] type 00 class 0x110100 [ 0.596626] pci 0000:ff:0b.2: [8086:6f37] type 00 class 0x110100 [ 0.597050] pci 0000:ff:0b.3: [8086:6f76] type 00 class 0x088000 [ 0.597502] pci 0000:ff:0c.0: [8086:6fe0] type 00 class 0x088000 [ 0.597931] pci 0000:ff:0c.1: [8086:6fe1] type 00 class 0x088000 [ 0.598363] pci 0000:ff:0c.2: [8086:6fe2] type 00 class 0x088000 [ 0.598788] pci 0000:ff:0c.3: [8086:6fe3] type 00 class 0x088000 [ 0.599260] pci 0000:ff:0f.0: [8086:6ff8] type 00 class 0x088000 [ 0.599894] pci 0000:ff:0f.4: [8086:6ffc] type 00 class 0x088000 [ 0.600329] pci 0000:ff:0f.5: [8086:6ffd] type 00 class 0x088000 [ 0.600757] pci 0000:ff:0f.6: [8086:6ffe] type 00 class 0x088000 [ 0.601195] pci 0000:ff:10.0: [8086:6f1d] type 00 class 0x088000 [ 0.601643] pci 0000:ff:10.1: [8086:6f34] type 00 class 0x110100 [ 0.602084] pci 0000:ff:10.5: [8086:6f1e] type 00 class 0x088000 [ 0.602517] pci 0000:ff:10.6: [8086:6f7d] type 00 class 0x110100 [ 0.603145] pci 0000:ff:10.7: [8086:6f1f] type 00 class 0x088000 [ 0.603580] pci 0000:ff:12.0: [8086:6fa0] type 00 class 0x088000 [ 0.604040] pci 0000:ff:12.1: [8086:6f30] type 00 class 0x110100 [ 0.604414] pci 0000:ff:13.0: [8086:6fa8] type 00 class 0x088000 [ 0.604888] pci 0000:ff:13.1: [8086:6f71] type 00 class 0x088000 [ 0.605367] pci 0000:ff:13.2: [8086:6faa] type 00 class 0x088000 [ 0.605835] pci 0000:ff:13.3: [8086:6fab] type 00 class 0x088000 [ 0.606316] pci 0000:ff:13.4: [8086:6fac] type 00 class 0x088000 [ 0.606785] pci 0000:ff:13.5: [8086:6fad] type 00 class 0x088000 [ 0.607258] pci 0000:ff:13.6: [8086:6fae] type 00 class 0x088000 [ 0.607887] pci 0000:ff:13.7: [8086:6faf] type 00 class 0x088000 [ 0.608333] pci 0000:ff:14.0: [8086:6fb0] type 00 class 0x088000 [ 0.608807] pci 0000:ff:14.1: [8086:6fb1] type 00 class 0x088000 [ 0.609285] pci 0000:ff:14.2: [8086:6fb2] type 00 class 0x088000 [ 0.609753] pci 0000:ff:14.3: [8086:6fb3] type 00 class 0x088000 [ 0.610251] pci 0000:ff:14.4: [8086:6fbc] type 00 class 0x088000 [ 0.610884] pci 0000:ff:14.5: [8086:6fbd] type 00 class 0x088000 [ 0.611325] pci 0000:ff:14.6: [8086:6fbe] type 00 class 0x088000 [ 0.611947] pci 0000:ff:14.7: [8086:6fbf] type 00 class 0x088000 [ 0.612388] pci 0000:ff:15.0: [8086:6fb4] type 00 class 0x088000 [ 0.612861] pci 0000:ff:15.1: [8086:6fb5] type 00 class 0x088000 [ 0.613342] pci 0000:ff:15.2: [8086:6fb6] type 00 class 0x088000 [ 0.613809] pci 0000:ff:15.3: [8086:6fb7] type 00 class 0x088000 [ 0.614345] pci 0000:ff:1e.0: [8086:6f98] type 00 class 0x088000 [ 0.614771] pci 0000:ff:1e.1: [8086:6f99] type 00 class 0x088000 [ 0.615206] pci 0000:ff:1e.2: [8086:6f9a] type 00 class 0x088000 [ 0.615848] pci 0000:ff:1e.3: [8086:6fc0] type 00 class 0x088000 [ 0.616104] pci 0000:ff:1e.4: [8086:6f9c] type 00 class 0x088000 [ 0.616552] pci 0000:ff:1f.0: [8086:6f88] type 00 class 0x088000 [ 0.616989] pci 0000:ff:1f.2: [8086:6f8a] type 00 class 0x088000 [ 0.617378] pci_bus 0000:ff: on NUMA node 0 [ 0.622128] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-fe]) [ 0.622289] acpi PNP0A08:00: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI HPX-Type3] [ 0.622569] acpi PNP0A08:00: _OSC: platform does not support [PME LTR] [ 0.622911] acpi PNP0A08:00: _OSC: OS now controls [PCIeCapability] [ 0.623031] acpi PNP0A08:00: FADT indicates ASPM is unsupported, using BIOS configuration [ 0.624593] PCI host bridge to bus 0000:00 [ 0.624710] pci_bus 0000:00: root bus resource [io 0x0000-0x0cf7 window] [ 0.624832] pci_bus 0000:00: root bus resource [io 0x1000-0xffff window] [ 0.624952] pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff window] [ 0.625061] pci_bus 0000:00: root bus resource [mem 0x90000000-0xfbffbfff window] [ 0.625207] pci_bus 0000:00: root bus resource [bus 00-fe] [ 0.625387] pci 0000:00:00.0: [8086:6f00] type 00 class 0x060000 [ 0.626028] pci 0000:00:01.0: [8086:6f02] type 01 class 0x060400 [ 0.626463] pci 0000:00:01.0: PME# supported from D0 D3hot D3cold [ 0.626835] pci 0000:00:01.1: [8086:6f03] type 01 class 0x060400 [ 0.627422] pci 0000:00:01.1: PME# supported from D0 D3hot D3cold [ 0.627818] pci 0000:00:02.0: [8086:6f04] type 01 class 0x060400 [ 0.628464] pci 0000:00:02.0: PME# supported from D0 D3hot D3cold [ 0.628833] pci 0000:00:02.2: [8086:6f06] type 01 class 0x060400 [ 0.629355] pci 0000:00:02.2: PME# supported from D0 D3hot D3cold [ 0.629742] pci 0000:00:03.0: [8086:6f08] type 01 class 0x060400 [ 0.630278] pci 0000:00:03.0: PME# supported from D0 D3hot D3cold [ 0.630652] pci 0000:00:03.2: [8086:6f0a] type 01 class 0x060400 [ 0.631185] pci 0000:00:03.2: PME# supported from D0 D3hot D3cold [ 0.631560] pci 0000:00:05.0: [8086:6f28] type 00 class 0x088000 [ 0.632348] pci 0000:00:05.1: [8086:6f29] type 00 class 0x088000 [ 0.632981] pci 0000:00:05.2: [8086:6f2a] type 00 class 0x088000 [ 0.633612] pci 0000:00:14.0: [8086:8c31] type 00 class 0x0c0330 [ 0.633839] pci 0000:00:14.0: reg 0x10: [mem 0xfb600000-0xfb60ffff 64bit] [ 0.634307] pci 0000:00:14.0: PME# supported from D3hot D3cold [ 0.634655] pci 0000:00:16.0: [8086:8c3a] type 00 class 0x078000 [ 0.635076] pci 0000:00:16.0: reg 0x10: [mem 0xfb617000-0xfb61700f 64bit] [ 0.635548] pci 0000:00:16.0: PME# supported from D0 D3hot D3cold [ 0.636062] pci 0000:00:16.1: [8086:8c3b] type 00 class 0x078000 [ 0.636281] pci 0000:00:16.1: reg 0x10: [mem 0xfb616000-0xfb61600f 64bit] [ 0.636750] pci 0000:00:16.1: PME# supported from D0 D3hot D3cold [ 0.637123] pci 0000:00:1a.0: [8086:8c2d] type 00 class 0x0c0320 [ 0.637321] pci 0000:00:1a.0: reg 0x10: [mem 0xfb614000-0xfb6143ff] [ 0.637859] pci 0000:00:1a.0: PME# supported from D0 D3hot D3cold [ 0.638187] pci 0000:00:1c.0: [8086:8c10] type 01 class 0x060400 [ 0.638735] pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold [ 0.638935] pci 0000:00:1c.0: Enabling MPC IRBNCE [ 0.639061] pci 0000:00:1c.0: Intel PCH root port ACS workaround enabled [ 0.647241] pci 0000:00:1c.1: [8086:8c12] type 01 class 0x060400 [ 0.648002] pci 0000:00:1c.1: PME# supported from D0 D3hot D3cold [ 0.648139] pci 0000:00:1c.1: Enabling MPC IRBNCE [ 0.648261] pci 0000:00:1c.1: Intel PCH root port ACS workaround enabled [ 0.648557] pci 0000:00:1c.3: [8086:8c16] type 01 class 0x060400 [ 0.649121] pci 0000:00:1c.3: PME# supported from D0 D3hot D3cold [ 0.649317] pci 0000:00:1c.3: Enabling MPC IRBNCE [ 0.649439] pci 0000:00:1c.3: Intel PCH root port ACS workaround enabled [ 0.649737] pci 0000:00:1c.4: [8086:8c18] type 01 class 0x060400 [ 0.650502] pci 0000:00:1c.4: PME# supported from D0 D3hot D3cold [ 0.650706] pci 0000:00:1c.4: Enabling MPC IRBNCE [ 0.650829] pci 0000:00:1c.4: Intel PCH root port ACS workaround enabled [ 0.651356] pci 0000:00:1d.0: [8086:8c26] type 00 class 0x0c0320 [ 0.651591] pci 0000:00:1d.0: reg 0x10: [mem 0xfb613000-0xfb6133ff] [ 0.652136] pci 0000:00:1d.0: PME# supported from D0 D3hot D3cold [ 0.652464] pci 0000:00:1f.0: [8086:8c54] type 00 class 0x060100 [ 0.653239] pci 0000:00:1f.2: [8086:8c02] type 00 class 0x010601 [ 0.653434] pci 0000:00:1f.2: reg 0x10: [io 0xf070-0xf077] [ 0.653593] pci 0000:00:1f.2: reg 0x14: [io 0xf060-0xf063] [ 0.653758] pci 0000:00:1f.2: reg 0x18: [io 0xf050-0xf057] [ 0.653916] pci 0000:00:1f.2: reg 0x1c: [io 0xf040-0xf043] [ 0.654085] pci 0000:00:1f.2: reg 0x20: [io 0xf020-0xf03f] [ 0.654244] pci 0000:00:1f.2: reg 0x24: [mem 0xfb612000-0xfb6127ff] [ 0.654557] pci 0000:00:1f.2: PME# supported from D3hot [ 0.654851] pci 0000:00:1f.3: [8086:8c22] type 00 class 0x0c0500 [ 0.655068] pci 0000:00:1f.3: reg 0x10: [mem 0xfb611000-0xfb6110ff 64bit] [ 0.655497] pci 0000:00:1f.3: reg 0x20: [io 0xf000-0xf01f] [ 0.655891] pci 0000:00:1f.6: [8086:8c24] type 00 class 0x118000 [ 0.656114] pci 0000:00:1f.6: reg 0x10: [mem 0xfb610000-0xfb610fff 64bit] [ 0.656840] pci 0000:00:01.0: PCI bridge to [bus 01] [ 0.657137] pci 0000:00:01.1: PCI bridge to [bus 02] [ 0.657471] pci 0000:03:00.0: [8086:6f50] type 00 class 0x088000 [ 0.657683] pci 0000:03:00.0: reg 0x10: [mem 0xfb506000-0xfb507fff 64bit] [ 0.658651] pci 0000:03:00.1: [8086:6f51] type 00 class 0x088000 [ 0.658872] pci 0000:03:00.1: reg 0x10: [mem 0xfb504000-0xfb505fff 64bit] [ 0.659789] pci 0000:03:00.2: [8086:6f52] type 00 class 0x088000 [ 0.660004] pci 0000:03:00.2: reg 0x10: [mem 0xfb502000-0xfb503fff 64bit] [ 0.660656] pci 0000:03:00.3: [8086:6f53] type 00 class 0x088000 [ 0.660877] pci 0000:03:00.3: reg 0x10: [mem 0xfb500000-0xfb501fff 64bit] [ 0.661578] pci 0000:00:02.0: PCI bridge to [bus 03] [ 0.661721] pci 0000:00:02.0: bridge window [mem 0xfb500000-0xfb5fffff] [ 0.662064] pci 0000:04:00.0: [8086:15ac] type 00 class 0x020000 [ 0.662277] pci 0000:04:00.0: reg 0x10: [mem 0xfbc00000-0xfbdfffff 64bit pref] [ 0.662564] pci 0000:04:00.0: reg 0x20: [mem 0xfbe04000-0xfbe07fff 64bit pref] [ 0.662755] pci 0000:04:00.0: reg 0x30: [mem 0xfb480000-0xfb4fffff pref] [ 0.663165] pci 0000:04:00.0: PME# supported from D0 D3hot D3cold [ 0.663389] pci 0000:04:00.0: reg 0x184: [mem 0x00000000-0x00003fff 64bit] [ 0.663518] pci 0000:04:00.0: VF(n) BAR0 space: [mem 0x00000000-0x000fffff 64bit] (contains BAR0 for 64 VFs) [ 0.663730] pci 0000:04:00.0: reg 0x190: [mem 0x00000000-0x00003fff 64bit] [ 0.663852] pci 0000:04:00.0: VF(n) BAR3 space: [mem 0x00000000-0x000fffff 64bit] (contains BAR3 for 64 VFs) [ 0.664430] pci 0000:04:00.1: [8086:15ac] type 00 class 0x020000 [ 0.666124] pci 0000:04:00.1: reg 0x10: [mem 0xfba00000-0xfbbfffff 64bit pref] [ 0.666412] pci 0000:04:00.1: reg 0x20: [mem 0xfbe00000-0xfbe03fff 64bit pref] [ 0.666596] pci 0000:04:00.1: reg 0x30: [mem 0xfb400000-0xfb47ffff pref] [ 0.666947] pci 0000:04:00.1: PME# supported from D0 D3hot D3cold [ 0.666947] pci 0000:04:00.1: reg 0x184: [mem 0x00000000-0x00003fff 64bit] [ 0.666947] pci 0000:04:00.1: VF(n) BAR0 space: [mem 0x00000000-0x000fffff 64bit] (contains BAR0 for 64 VFs) [ 0.666947] pci 0000:04:00.1: reg 0x190: [mem 0x00000000-0x00003fff 64bit] [ 0.666947] pci 0000:04:00.1: VF(n) BAR3 space: [mem 0x00000000-0x000fffff 64bit] (contains BAR3 for 64 VFs) [ 0.667056] pci 0000:00:02.2: PCI bridge to [bus 04] [ 0.667056] pci 0000:00:02.2: bridge window [mem 0xfb400000-0xfb4fffff] [ 0.667056] pci 0000:00:02.2: bridge window [mem 0xfba00000-0xfbefffff 64bit pref] [ 0.667056] pci 0000:00:03.0: PCI bridge to [bus 05] [ 0.668062] pci 0000:00:03.2: PCI bridge to [bus 06] [ 0.668430] pci 0000:07:00.0: working around ROM BAR overlap defect [ 0.668550] pci 0000:07:00.0: [8086:1533] type 00 class 0x020000 [ 0.668757] pci 0000:07:00.0: reg 0x10: [mem 0xfb300000-0xfb37ffff] [ 0.668974] pci 0000:07:00.0: reg 0x18: [io 0xe000-0xe01f] [ 0.669109] pci 0000:07:00.0: reg 0x1c: [mem 0xfb380000-0xfb383fff] [ 0.669642] pci 0000:07:00.0: PME# supported from D0 D3hot D3cold [ 0.670115] pci 0000:00:1c.0: PCI bridge to [bus 07] [ 0.670244] pci 0000:00:1c.0: bridge window [io 0xe000-0xefff] [ 0.670374] pci 0000:00:1c.0: bridge window [mem 0xfb300000-0xfb3fffff] [ 0.670749] pci 0000:08:00.0: working around ROM BAR overlap defect [ 0.670869] pci 0000:08:00.0: [8086:1533] type 00 class 0x020000 [ 0.671082] pci 0000:08:00.0: reg 0x10: [mem 0xfb200000-0xfb27ffff] [ 0.671301] pci 0000:08:00.0: reg 0x18: [io 0xd000-0xd01f] [ 0.671467] pci 0000:08:00.0: reg 0x1c: [mem 0xfb280000-0xfb283fff] [ 0.672003] pci 0000:08:00.0: PME# supported from D0 D3hot D3cold [ 0.672411] pci 0000:00:1c.1: PCI bridge to [bus 08] [ 0.672538] pci 0000:00:1c.1: bridge window [io 0xd000-0xdfff] [ 0.672666] pci 0000:00:1c.1: bridge window [mem 0xfb200000-0xfb2fffff] [ 0.673013] pci 0000:09:00.0: [1a03:1150] type 01 class 0x060400 [ 0.673337] pci 0000:09:00.0: enabling Extended Tags [ 0.673679] pci 0000:09:00.0: supports D1 D2 [ 0.673792] pci 0000:09:00.0: PME# supported from D0 D1 D2 D3hot D3cold [ 0.674165] pci 0000:00:1c.3: PCI bridge to [bus 09-0a] [ 0.674292] pci 0000:00:1c.3: bridge window [io 0xc000-0xcfff] [ 0.674426] pci 0000:00:1c.3: bridge window [mem 0xfa000000-0xfb0fffff] [ 0.674729] pci_bus 0000:0a: extended config space not accessible [ 0.674906] pci 0000:0a:00.0: [1a03:2000] type 00 class 0x030000 [ 0.675114] pci 0000:0a:00.0: reg 0x10: [mem 0xfa000000-0xfaffffff] [ 0.675284] pci 0000:0a:00.0: reg 0x14: [mem 0xfb000000-0xfb01ffff] [ 0.675451] pci 0000:0a:00.0: reg 0x18: [io 0xc000-0xc07f] [ 0.675810] pci 0000:0a:00.0: Video device with shadowed ROM at [mem 0x000c0000-0x000dffff] [ 0.676106] pci 0000:0a:00.0: supports D1 D2 [ 0.676220] pci 0000:0a:00.0: PME# supported from D0 D1 D2 D3hot D3cold [ 0.676661] pci 0000:09:00.0: PCI bridge to [bus 0a] [ 0.676799] pci 0000:09:00.0: bridge window [io 0xc000-0xcfff] [ 0.676936] pci 0000:09:00.0: bridge window [mem 0xfa000000-0xfb0fffff] [ 0.677337] pci 0000:0b:00.0: [8086:1521] type 00 class 0x020000 [ 0.677539] pci 0000:0b:00.0: reg 0x10: [mem 0xfb160000-0xfb17ffff] [ 0.677748] pci 0000:0b:00.0: reg 0x18: [io 0xb060-0xb07f] [ 0.677912] pci 0000:0b:00.0: reg 0x1c: [mem 0xfb18c000-0xfb18ffff] [ 0.678433] pci 0000:0b:00.0: PME# supported from D0 D3hot D3cold [ 0.678675] pci 0000:0b:00.0: reg 0x184: [mem 0x00000000-0x00003fff 64bit pref] [ 0.678821] pci 0000:0b:00.0: VF(n) BAR0 space: [mem 0x00000000-0x0001ffff 64bit pref] (contains BAR0 for 8 VFs) [ 0.679042] pci 0000:0b:00.0: reg 0x190: [mem 0x00000000-0x00003fff 64bit pref] [ 0.679060] pci 0000:0b:00.0: VF(n) BAR3 space: [mem 0x00000000-0x0001ffff 64bit pref] (contains BAR3 for 8 VFs) [ 0.679627] pci 0000:0b:00.1: [8086:1521] type 00 class 0x020000 [ 0.679842] pci 0000:0b:00.1: reg 0x10: [mem 0xfb140000-0xfb15ffff] [ 0.680052] pci 0000:0b:00.1: reg 0x18: [io 0xb040-0xb05f] [ 0.680214] pci 0000:0b:00.1: reg 0x1c: [mem 0xfb188000-0xfb18bfff] [ 0.680729] pci 0000:0b:00.1: PME# supported from D0 D3hot D3cold [ 0.680963] pci 0000:0b:00.1: reg 0x184: [mem 0x00000000-0x00003fff 64bit pref] [ 0.681060] pci 0000:0b:00.1: VF(n) BAR0 space: [mem 0x00000000-0x0001ffff 64bit pref] (contains BAR0 for 8 VFs) [ 0.681294] pci 0000:0b:00.1: reg 0x190: [mem 0x00000000-0x00003fff 64bit pref] [ 0.681439] pci 0000:0b:00.1: VF(n) BAR3 space: [mem 0x00000000-0x0001ffff 64bit pref] (contains BAR3 for 8 VFs) [ 0.681971] pci 0000:0b:00.2: [8086:1521] type 00 class 0x020000 [ 0.682142] pci 0000:0b:00.2: reg 0x10: [mem 0xfb120000-0xfb13ffff] [ 0.682352] pci 0000:0b:00.2: reg 0x18: [io 0xb020-0xb03f] [ 0.682521] pci 0000:0b:00.2: reg 0x1c: [mem 0xfb184000-0xfb187fff] [ 0.683039] pci 0000:0b:00.2: PME# supported from D0 D3hot D3cold [ 0.683171] pci 0000:0b:00.2: reg 0x184: [mem 0x00000000-0x00003fff 64bit pref] [ 0.683317] pci 0000:0b:00.2: VF(n) BAR0 space: [mem 0x00000000-0x0001ffff 64bit pref] (contains BAR0 for 8 VFs) [ 0.683535] pci 0000:0b:00.2: reg 0x190: [mem 0x00000000-0x00003fff 64bit pref] [ 0.683685] pci 0000:0b:00.2: VF(n) BAR3 space: [mem 0x00000000-0x0001ffff 64bit pref] (contains BAR3 for 8 VFs) [ 0.684240] pci 0000:0b:00.3: [8086:1521] type 00 class 0x020000 [ 0.684442] pci 0000:0b:00.3: reg 0x10: [mem 0xfb100000-0xfb11ffff] [ 0.684655] pci 0000:0b:00.3: reg 0x18: [io 0xb000-0xb01f] [ 0.684822] pci 0000:0b:00.3: reg 0x1c: [mem 0xfb180000-0xfb183fff] [ 0.685339] pci 0000:0b:00.3: PME# supported from D0 D3hot D3cold [ 0.685572] pci 0000:0b:00.3: reg 0x184: [mem 0x00000000-0x00003fff 64bit pref] [ 0.685721] pci 0000:0b:00.3: VF(n) BAR0 space: [mem 0x00000000-0x0001ffff 64bit pref] (contains BAR0 for 8 VFs) [ 0.685939] pci 0000:0b:00.3: reg 0x190: [mem 0x00000000-0x00003fff 64bit pref] [ 0.686060] pci 0000:0b:00.3: VF(n) BAR3 space: [mem 0x00000000-0x0001ffff 64bit pref] (contains BAR3 for 8 VFs) [ 0.686680] pci 0000:00:1c.4: PCI bridge to [bus 0b] [ 0.686807] pci 0000:00:1c.4: bridge window [io 0xb000-0xbfff] [ 0.686936] pci 0000:00:1c.4: bridge window [mem 0xfb100000-0xfb1fffff] [ 0.687075] pci 0000:00:1c.4: bridge has subordinate 0b but max busn 0c [ 0.687545] pci_bus 0000:00: on NUMA node 0 [ 0.687643] xen: registering gsi 13 triggering 1 polarity 0 [ 0.688621] ACPI: PCI: Interrupt link LNKA configured for IRQ 11 [ 0.688827] ACPI: PCI: Interrupt link LNKB configured for IRQ 10 [ 0.689018] ACPI: PCI: Interrupt link LNKC configured for IRQ 5 [ 0.689135] ACPI: PCI: Interrupt link LNKD configured for IRQ 11 [ 0.689326] ACPI: PCI: Interrupt link LNKE configured for IRQ 0 [ 0.689445] ACPI: PCI: Interrupt link LNKE disabled [ 0.689639] ACPI: PCI: Interrupt link LNKF configured for IRQ 0 [ 0.689758] ACPI: PCI: Interrupt link LNKF disabled [ 0.689943] ACPI: PCI: Interrupt link LNKG configured for IRQ 0 [ 0.690060] ACPI: PCI: Interrupt link LNKG disabled [ 0.690248] ACPI: PCI: Interrupt link LNKH configured for IRQ 0 [ 0.690367] ACPI: PCI: Interrupt link LNKH disabled [ 0.690647] xen:balloon: Initialising balloon driver [ 0.691151] iommu: Default domain type: Translated [ 0.699064] iommu: DMA domain TLB invalidation policy: lazy mode [ 0.699250] SCSI subsystem initialized [ 0.699377] libata version 3.00 loaded. [ 0.699377] ACPI: bus type USB registered [ 0.699377] usbcore: registered new interface driver usbfs [ 0.699377] usbcore: registered new interface driver hub [ 0.699469] usbcore: registered new device driver usb [ 0.699605] pps_core: LinuxPPS API ver. 1 registered [ 0.700061] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti [ 0.700213] PTP clock support registered [ 0.700349] Advanced Linux Sound Architecture Driver Initialized. [ 0.700356] NetLabel: Initializing [ 0.700468] NetLabel: domain hash size = 128 [ 0.700586] NetLabel: protocols = UNLABELED CIPSOv4 CALIPSO [ 0.701077] NetLabel: unlabeled traffic allowed by default [ 0.701217] PCI: Using ACPI for IRQ routing [ 0.736931] PCI: pci_cache_line_size set to 64 bytes [ 0.737715] e820: reserve RAM buffer [mem 0x0009a000-0x0009ffff] [ 0.737718] e820: reserve RAM buffer [mem 0x20066000-0x23ffffff] [ 0.737743] pci 0000:0a:00.0: vgaarb: setting as boot VGA device [ 0.737743] pci 0000:0a:00.0: vgaarb: bridge control possible [ 0.737743] pci 0000:0a:00.0: vgaarb: VGA device added: decodes=io+mem,owns=io+mem,locks=none [ 0.738061] vgaarb: loaded [ 0.740060] clocksource: Switched to clocksource tsc-early [ 0.740297] VFS: Disk quotas dquot_6.6.0 [ 0.740421] VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes) [ 0.740565] hugetlbfs: disabling because there are no supported hugepage sizes [ 0.740723] pnp: PnP ACPI init [ 0.741239] xen: registering gsi 8 triggering 1 polarity 0 [ 0.741434] system 00:01: [io 0x0500-0x057f] has been reserved [ 0.741561] system 00:01: [io 0x0400-0x047f] has been reserved [ 0.741680] system 00:01: [io 0x0580-0x059f] has been reserved [ 0.741799] system 00:01: [io 0x0600-0x061f] has been reserved [ 0.741917] system 00:01: [io 0x0880-0x0883] has been reserved [ 0.742036] system 00:01: [io 0x0800-0x081f] has been reserved [ 0.742179] system 00:01: [mem 0xfed1c000-0xfed3ffff] could not be reserved [ 0.742301] system 00:01: [mem 0xfed45000-0xfed8bfff] has been reserved [ 0.742421] system 00:01: [mem 0xff000000-0xffffffff] has been reserved [ 0.742542] system 00:01: [mem 0xfee00000-0xfeefffff] has been reserved [ 0.742662] system 00:01: [mem 0xfed12000-0xfed1200f] has been reserved [ 0.742783] system 00:01: [mem 0xfed12010-0xfed1201f] has been reserved [ 0.742903] system 00:01: [mem 0xfed1b000-0xfed1bfff] has been reserved [ 0.743311] system 00:02: [io 0x0a00-0x0a0f] has been reserved [ 0.743434] system 00:02: [io 0x0a10-0x0a1f] has been reserved [ 0.743560] system 00:02: [io 0x0a20-0x0a2f] has been reserved [ 0.743679] system 00:02: [io 0x0a30-0x0a3f] has been reserved [ 0.743797] system 00:02: [io 0x0a40-0x0a4f] has been reserved [ 0.744226] xen: registering gsi 4 triggering 1 polarity 0 [ 0.744230] Already setup the GSI :4 [ 0.744343] pnp 00:03: [dma 0 disabled] [ 0.744649] xen: registering gsi 3 triggering 1 polarity 0 [ 0.744659] pnp 00:04: [dma 0 disabled] [ 0.745241] pnp: PnP ACPI: found 5 devices [ 0.776091] PM-Timer failed consistency check (0xffffff) - aborting. [ 0.776283] NET: Registered PF_INET protocol family [ 0.776444] IP idents hash table entries: 8192 (order: 4, 65536 bytes, linear) [ 0.776809] tcp_listen_portaddr_hash hash table entries: 256 (order: 0, 4096 bytes, linear) [ 0.776961] Table-perturb hash table entries: 65536 (order: 6, 262144 bytes, linear) [ 0.777144] TCP established hash table entries: 4096 (order: 3, 32768 bytes, linear) [ 0.777325] TCP bind hash table entries: 4096 (order: 5, 131072 bytes, linear) [ 0.777498] TCP: Hash tables configured (established 4096 bind 4096) [ 0.777642] UDP hash table entries: 256 (order: 1, 8192 bytes, linear) [ 0.777765] UDP-Lite hash table entries: 256 (order: 1, 8192 bytes, linear) [ 0.777916] NET: Registered PF_UNIX/PF_LOCAL protocol family [ 0.778273] RPC: Registered named UNIX socket transport module. [ 0.778401] RPC: Registered udp transport module. [ 0.778515] RPC: Registered tcp transport module. [ 0.778629] RPC: Registered tcp NFSv4.1 backchannel transport module. [ 0.779158] pci 0000:00:1c.4: bridge window [mem 0x00100000-0x000fffff 64bit pref] to [bus 0b] add_size 100000 add_align 100000 [ 0.779331] clipped [mem size 0x00000000 64bit pref] to [mem size 0xfffffffffffa0000 64bit pref] for e820 entry [mem 0x0009ac00-0x000fffff] [ 0.779496] clipped [mem size 0x00020000 64bit pref] to [mem size 0xfffffffffffc0000 64bit pref] for e820 entry [mem 0x0009ac00-0x000fffff] [ 0.779661] pci 0000:00:1c.4: BAR 15: assigned [mem 0x90000000-0x900fffff 64bit pref] [ 0.779809] pci 0000:00:01.0: PCI bridge to [bus 01] [ 0.779984] pci 0000:00:01.1: PCI bridge to [bus 02] [ 0.780176] pci 0000:00:02.0: PCI bridge to [bus 03] [ 0.780310] pci 0000:00:02.0: bridge window [mem 0xfb500000-0xfb5fffff] [ 0.780472] pci 0000:04:00.0: BAR 7: no space for [mem size 0x00100000 64bit] [ 0.780596] pci 0000:04:00.0: BAR 7: failed to assign [mem size 0x00100000 64bit] [ 0.780741] pci 0000:04:00.0: BAR 10: no space for [mem size 0x00100000 64bit] [ 0.780885] pci 0000:04:00.0: BAR 10: failed to assign [mem size 0x00100000 64bit] [ 0.781034] pci 0000:04:00.1: BAR 7: no space for [mem size 0x00100000 64bit] [ 0.781171] pci 0000:04:00.1: BAR 7: failed to assign [mem size 0x00100000 64bit] [ 0.781317] pci 0000:04:00.1: BAR 10: no space for [mem size 0x00100000 64bit] [ 0.781461] pci 0000:04:00.1: BAR 10: failed to assign [mem size 0x00100000 64bit] [ 0.781607] pci 0000:04:00.0: BAR 7: no space for [mem size 0x00100000 64bit] [ 0.781730] pci 0000:04:00.0: BAR 7: failed to assign [mem size 0x00100000 64bit] [ 0.781875] pci 0000:04:00.0: BAR 10: no space for [mem size 0x00100000 64bit] [ 0.782019] pci 0000:04:00.0: BAR 10: failed to assign [mem size 0x00100000 64bit] [ 0.782176] pci 0000:04:00.1: BAR 7: no space for [mem size 0x00100000 64bit] [ 0.782299] pci 0000:04:00.1: BAR 7: failed to assign [mem size 0x00100000 64bit] [ 0.782477] pci 0000:04:00.1: BAR 10: no space for [mem size 0x00100000 64bit] [ 0.782621] pci 0000:04:00.1: BAR 10: failed to assign [mem size 0x00100000 64bit] [ 0.782766] pci 0000:00:02.2: PCI bridge to [bus 04] [ 0.782901] pci 0000:00:02.2: bridge window [mem 0xfb400000-0xfb4fffff] [ 0.783035] pci 0000:00:02.2: bridge window [mem 0xfba00000-0xfbefffff 64bit pref] [ 0.783220] pci 0000:00:03.0: PCI bridge to [bus 05] [ 0.783394] pci 0000:00:03.2: PCI bridge to [bus 06] [ 0.783568] pci 0000:00:1c.0: PCI bridge to [bus 07] [ 0.783688] pci 0000:00:1c.0: bridge window [io 0xe000-0xefff] [ 0.783834] pci 0000:00:1c.0: bridge window [mem 0xfb300000-0xfb3fffff] [ 0.783995] pci 0000:00:1c.1: PCI bridge to [bus 08] [ 0.784127] pci 0000:00:1c.1: bridge window [io 0xd000-0xdfff] [ 0.784269] pci 0000:00:1c.1: bridge window [mem 0xfb200000-0xfb2fffff] [ 0.784431] pci 0000:09:00.0: PCI bridge to [bus 0a] [ 0.784552] pci 0000:09:00.0: bridge window [io 0xc000-0xcfff] [ 0.784693] pci 0000:09:00.0: bridge window [mem 0xfa000000-0xfb0fffff] [ 0.784859] pci 0000:00:1c.3: PCI bridge to [bus 09-0a] [ 0.784979] pci 0000:00:1c.3: bridge window [io 0xc000-0xcfff] [ 0.785139] pci 0000:00:1c.3: bridge window [mem 0xfa000000-0xfb0fffff] [ 0.785303] pci 0000:0b:00.0: BAR 7: assigned [mem 0x90000000-0x9001ffff 64bit pref] [ 0.785462] pci 0000:0b:00.0: BAR 10: assigned [mem 0x90020000-0x9003ffff 64bit pref] [ 0.785615] pci 0000:0b:00.1: BAR 7: assigned [mem 0x90040000-0x9005ffff 64bit pref] [ 0.785769] pci 0000:0b:00.1: BAR 10: assigned [mem 0x90060000-0x9007ffff 64bit pref] [ 0.785922] pci 0000:0b:00.2: BAR 7: assigned [mem 0x90080000-0x9009ffff 64bit pref] [ 0.786091] pci 0000:0b:00.2: BAR 10: assigned [mem 0x900a0000-0x900bffff 64bit pref] [ 0.786245] pci 0000:0b:00.3: BAR 7: assigned [mem 0x900c0000-0x900dffff 64bit pref] [ 0.786398] pci 0000:0b:00.3: BAR 10: assigned [mem 0x900e0000-0x900fffff 64bit pref] [ 0.786559] pci 0000:00:1c.4: PCI bridge to [bus 0b] [ 0.786679] pci 0000:00:1c.4: bridge window [io 0xb000-0xbfff] [ 0.786818] pci 0000:00:1c.4: bridge window [mem 0xfb100000-0xfb1fffff] [ 0.786952] pci 0000:00:1c.4: bridge window [mem 0x90000000-0x900fffff 64bit pref] [ 0.787139] pci_bus 0000:00: Some PCI device resources are unassigned, try booting with pci=realloc [ 0.787290] pci_bus 0000:00: resource 4 [io 0x0000-0x0cf7 window] [ 0.787409] pci_bus 0000:00: resource 5 [io 0x1000-0xffff window] [ 0.787528] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff window] [ 0.787649] pci_bus 0000:00: resource 7 [mem 0x90000000-0xfbffbfff window] [ 0.787771] pci_bus 0000:03: resource 1 [mem 0xfb500000-0xfb5fffff] [ 0.787895] pci_bus 0000:04: resource 1 [mem 0xfb400000-0xfb4fffff] [ 0.788023] pci_bus 0000:04: resource 2 [mem 0xfba00000-0xfbefffff 64bit pref] [ 0.788182] pci_bus 0000:07: resource 0 [io 0xe000-0xefff] [ 0.788298] pci_bus 0000:07: resource 1 [mem 0xfb300000-0xfb3fffff] [ 0.788418] pci_bus 0000:08: resource 0 [io 0xd000-0xdfff] [ 0.788534] pci_bus 0000:08: resource 1 [mem 0xfb200000-0xfb2fffff] [ 0.788653] pci_bus 0000:09: resource 0 [io 0xc000-0xcfff] [ 0.788770] pci_bus 0000:09: resource 1 [mem 0xfa000000-0xfb0fffff] [ 0.788889] pci_bus 0000:0a: resource 0 [io 0xc000-0xcfff] [ 0.789006] pci_bus 0000:0a: resource 1 [mem 0xfa000000-0xfb0fffff] [ 0.789132] pci_bus 0000:0b: resource 0 [io 0xb000-0xbfff] [ 0.789252] pci_bus 0000:0b: resource 1 [mem 0xfb100000-0xfb1fffff] [ 0.789390] pci_bus 0000:0b: resource 2 [mem 0x90000000-0x900fffff 64bit pref] [ 0.789932] pci 0000:00:05.0: disabled boot interrupts on device [8086:6f28] [ 0.790170] xen: registering gsi 19 triggering 0 polarity 1 [ 0.790196] xen: --> pirq=19 -> irq=19 (gsi=19) [ 0.799017] xen: registering gsi 18 triggering 0 polarity 1 [ 0.799035] xen: --> pirq=18 -> irq=18 (gsi=18) [ 0.815254] pci 0000:00:1a.0: quirk_usb_early_handoff+0x0/0x720 took 15908 usecs [ 0.815498] xen: registering gsi 18 triggering 0 polarity 1 [ 0.815504] Already setup the GSI :18 [ 0.832209] pci 0000:00:1d.0: quirk_usb_early_handoff+0x0/0x720 took 16373 usecs [ 0.832420] pci 0000:04:00.0: CLS mismatch (64 != 32), using 64 bytes [ 0.832562] PCI-DMA: Using software bounce buffering for IO (SWIOTLB) [ 0.832637] Unpacking initramfs... [ 0.832700] software IO TLB: mapped [mem 0x000000001b180000-0x000000001f180000] (64MB) [ 0.833137] kvm: no hardware support for 'kvm_intel' [ 0.841022] has_svm: not amd or hygon [ 0.841154] kvm: no hardware support for 'kvm_amd' [ 0.841277] clocksource: tsc: mask: 0xffffffffffffffff max_cycles: 0x1fb62f12e8c, max_idle_ns: 440795238402 ns [ 0.854273] clocksource: Switched to clocksource tsc [ 0.856527] Initialise system trusted keyrings [ 0.856845] workingset: timestamp_bits=62 max_order=17 bucket_order=0 [ 0.858310] NFS: Registering the id_resolver key type [ 0.858436] Key type id_resolver registered [ 0.858548] Key type id_legacy registered [ 0.858752] 9p: Installing v9fs 9p2000 file system support [ 0.872420] Key type asymmetric registered [ 0.872547] Asymmetric key parser 'x509' registered [ 0.872684] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 251) [ 0.872840] io scheduler mq-deadline registered [ 0.872954] io scheduler kyber registered [ 0.873919] xen: registering gsi 16 triggering 0 polarity 1 [ 0.873948] xen: --> pirq=16 -> irq=16 (gsi=16) [ 0.874505] xen: registering gsi 16 triggering 0 polarity 1 [ 0.874511] Already setup the GSI :16 [ 0.875143] xen: registering gsi 16 triggering 0 polarity 1 [ 0.875148] Already setup the GSI :16 [ 0.875469] xen: registering gsi 16 triggering 0 polarity 1 [ 0.875473] Already setup the GSI :16 [ 0.875792] xen: registering gsi 16 triggering 0 polarity 1 [ 0.875796] Already setup the GSI :16 [ 0.876381] xen: registering gsi 16 triggering 0 polarity 1 [ 0.876385] Already setup the GSI :16 [ 0.876951] xen: registering gsi 16 triggering 0 polarity 1 [ 0.876956] Already setup the GSI :16 [ 0.877413] xen: registering gsi 17 triggering 0 polarity 1 [ 0.877432] xen: --> pirq=17 -> irq=17 (gsi=17) [ 0.877775] xen: registering gsi 19 triggering 0 polarity 1 [ 0.877780] Already setup the GSI :19 [ 0.878233] xen: registering gsi 16 triggering 0 polarity 1 [ 0.878238] Already setup the GSI :16 [ 0.878907] input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input0 [ 0.879097] ACPI: button: Power Button [PWRB] [ 0.879242] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input1 [ 0.879486] ACPI: button: Power Button [PWRF] [ 0.879848] Monitor-Mwait will be used to enter C-1 state [ 0.879882] Monitor-Mwait will be used to enter C-2 state [ 0.879899] ACPI: \_SB_.SCK0.CP00: Found 2 idle states [ 0.880352] ACPI: \_SB_.SCK0.CP01: Found 2 idle states [ 0.880725] ACPI: \_SB_.SCK0.CP02: Found 2 idle states [ 0.881053] ACPI: \_SB_.SCK0.CP03: Found 2 idle states [ 0.881515] ACPI: \_SB_.SCK0.CP04: Found 2 idle states [ 0.881994] ACPI: \_SB_.SCK0.CP05: Found 2 idle states [ 0.882360] ACPI: \_SB_.SCK0.CP06: Found 2 idle states [ 0.883046] ACPI: \_SB_.SCK0.CP07: Found 2 idle states [ 0.883726] xen:xen_evtchn: Event-channel device installed [ 0.883915] xen_pciback: backend is vpci [ 0.884597] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled [ 0.884908] 00:04: ttyS1 at I/O 0x2f8 (irq = 3, base_baud = 115200) is a 16550A [ 0.885676] hpet_acpi_add: no address or irqs in _CRS [ 0.885864] Non-volatile memory driver v1.3 [ 0.885978] AMD-Vi: AMD IOMMUv2 functionality not available on this system - This is not a bug. [ 0.888716] loop: module loaded [ 0.894536] ahci 0000:00:1f.2: version 3.0 [ 0.894639] xen: registering gsi 16 triggering 0 polarity 1 [ 0.894648] Already setup the GSI :16 [ 0.894974] ahci 0000:00:1f.2: AHCI 0001.0300 32 slots 6 ports 6 Gbps 0x3f impl SATA mode [ 0.895141] ahci 0000:00:1f.2: flags: 64bit ncq led clo pio ems apst [ 0.910700] scsi host0: ahci [ 0.911123] scsi host1: ahci [ 0.911498] scsi host2: ahci [ 0.911832] scsi host3: ahci [ 0.912140] scsi host4: ahci [ 0.912458] scsi host5: ahci [ 0.912602] ata1: SATA max UDMA/133 abar m2048@0xfb612000 port 0xfb612100 irq 74 [ 0.912750] ata2: SATA max UDMA/133 abar m2048@0xfb612000 port 0xfb612180 irq 74 [ 0.912895] ata3: SATA max UDMA/133 abar m2048@0xfb612000 port 0xfb612200 irq 74 [ 0.913040] ata4: SATA max UDMA/133 abar m2048@0xfb612000 port 0xfb612280 irq 74 [ 0.913199] ata5: SATA max UDMA/133 abar m2048@0xfb612000 port 0xfb612300 irq 74 [ 0.913344] ata6: SATA max UDMA/133 abar m2048@0xfb612000 port 0xfb612380 irq 74 [ 0.913808] tun: Universal TUN/TAP device driver, 1.6 [ 0.914055] e100: Intel(R) PRO/100 Network Driver [ 0.914180] e100: Copyright(c) 1999-2006 Intel Corporation [ 0.914320] sky2: driver version 1.30 [ 0.914505] xen_netfront: Initialising Xen virtual ethernet driver [ 0.914877] xen: registering gsi 18 triggering 0 polarity 1 [ 0.914886] Already setup the GSI :18 [ 0.915123] ehci-pci 0000:00:1a.0: EHCI Host Controller [ 0.915304] ehci-pci 0000:00:1a.0: new USB bus registered, assigned bus number 1 [ 0.915481] ehci-pci 0000:00:1a.0: debug port 2 [ 0.919619] ehci-pci 0000:00:1a.0: irq 18, io mem 0xfb614000 [ 0.926110] ehci-pci 0000:00:1a.0: USB 2.0 started, EHCI 1.00 [ 0.926373] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 6.01 [ 0.926523] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 0.926667] usb usb1: Product: EHCI Host Controller [ 0.926782] usb usb1: Manufacturer: Linux 6.1.95+ ehci_hcd [ 0.926898] usb usb1: SerialNumber: 0000:00:1a.0 [ 0.927194] hub 1-0:1.0: USB hub found [ 0.927325] hub 1-0:1.0: 2 ports detected [ 0.927690] xen: registering gsi 18 triggering 0 polarity 1 [ 0.927699] Already setup the GSI :18 [ 0.927892] ehci-pci 0000:00:1d.0: EHCI Host Controller [ 0.928134] ehci-pci 0000:00:1d.0: new USB bus registered, assigned bus number 2 [ 0.928311] ehci-pci 0000:00:1d.0: debug port 2 [ 0.932394] ehci-pci 0000:00:1d.0: irq 18, io mem 0xfb613000 [ 0.939112] ehci-pci 0000:00:1d.0: USB 2.0 started, EHCI 1.00 [ 0.939362] usb usb2: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 6.01 [ 0.939513] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 0.939658] usb usb2: Product: EHCI Host Controller [ 0.939780] usb usb2: Manufacturer: Linux 6.1.95+ ehci_hcd [ 0.939896] usb usb2: SerialNumber: 0000:00:1d.0 [ 0.940196] hub 2-0:1.0: USB hub found [ 0.940322] hub 2-0:1.0: 2 ports detected [ 0.940758] xen: registering gsi 19 triggering 0 polarity 1 [ 0.940767] Already setup the GSI :19 [ 0.940976] xhci_hcd 0000:00:14.0: xHCI Host Controller [ 0.941172] xhci_hcd 0000:00:14.0: new USB bus registered, assigned bus number 3 [ 0.942389] xhci_hcd 0000:00:14.0: hcc params 0x200077c1 hci version 0x100 quirks 0x0000000000009810 [ 0.942870] xhci_hcd 0000:00:14.0: xHCI Host Controller [ 0.943072] xhci_hcd 0000:00:14.0: new USB bus registered, assigned bus number 4 [ 0.943220] xhci_hcd 0000:00:14.0: Host supports USB 3.0 SuperSpeed [ 0.943425] usb usb3: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 6.01 [ 0.943573] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 0.943717] usb usb3: Product: xHCI Host Controller [ 0.943831] usb usb3: Manufacturer: Linux 6.1.95+ xhci-hcd [ 0.943953] usb usb3: SerialNumber: 0000:00:14.0 [ 0.944252] hub 3-0:1.0: USB hub found [ 0.944386] hub 3-0:1.0: 8 ports detected [ 0.945504] usb usb4: New USB device found, idVendor=1d6b, idProduct=0003, bcdDevice= 6.01 [ 0.945656] usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 0.945800] usb usb4: Product: xHCI Host Controller [ 0.945915] usb usb4: Manufacturer: Linux 6.1.95+ xhci-hcd [ 0.946030] usb usb4: SerialNumber: 0000:00:14.0 [ 0.946281] hub 4-0:1.0: USB hub found [ 0.946413] hub 4-0:1.0: 6 ports detected [ 0.947513] usbcore: registered new interface driver usblp [ 0.947650] usbcore: registered new interface driver usb-storage [ 0.947795] i8042: PNP: No PS/2 controller found. [ 0.948169] rtc_cmos 00:00: RTC can wake from S4 [ 0.948836] rtc_cmos 00:00: registered as rtc0 [ 0.948995] rtc_cmos 00:00: alarms up to one month, y3k, 114 bytes nvram [ 0.949237] device-mapper: uevent: version 1.0.3 [ 0.949457] device-mapper: ioctl: 4.47.0-ioctl (2022-07-28) initialised: dm-devel@redhat.com [ 0.949471] xen: registering gsi 18 triggering 0 polarity 1 [ 0.949611] intel_pstate: CPU model not supported [ 0.949618] Already setup the GSI :18 [ 0.949657] i801_smbus 0000:00:1f.3: SPD Write Disable is set [ 0.949738] hid: raw HID events driver (C) Jiri Kosina [ 0.949869] i801_smbus 0000:00:1f.3: SMBus using PCI interrupt [ 0.950118] usbcore: registered new interface driver usbhid [ 0.950333] usbhid: USB HID core driver [ 0.950732] i2c i2c-0: 1/4 memory slots populated (from DMI) [ 0.950982] Initializing XFRM netlink socket [ 0.951180] Freeing initrd memory: 19884K [ 0.951252] NET: Registered PF_INET6 protocol family [ 0.951834] Segment Routing with IPv6 [ 0.951954] In-situ OAM (IOAM) with IPv6 [ 0.952113] sit: IPv6, IPv4 and MPLS over IPv4 tunneling driver [ 0.952364] NET: Registered PF_PACKET protocol family [ 0.952517] 9pnet: Installing 9P2000 support [ 0.952643] Key type dns_resolver registered [ 0.953378] IPI shorthand broadcast: enabled [ 0.953516] sched_clock: Marking stable (917283858, 36054395)->(1797647259, -844309006) [ 0.954036] registered taskstats version 1 [ 0.954163] Loading compiled-in X.509 certificates [ 0.956538] PM: Magic number: 12:393:212 [ 0.956713] pci 0000:ff:14.5: hash matches [ 0.956844] acpi device:63: hash matches [ 0.957003] printk: console [netcon0] enabled [ 0.957134] netconsole: network logging started [ 0.957485] cfg80211: Loading compiled-in X.509 certificates for regulatory database [ 0.969542] cfg80211: Loaded X.509 cert 'sforshee: 00b28ddf47aef9cea7' [ 0.969881] cfg80211: Loaded X.509 cert 'wens: 61c038651aabdcf94bd0ac7ff06c7248db18c600' [ 0.970133] ALSA device list: [ 0.970271] No soundcards found. [ 0.970567] cfg80211: loaded regulatory.db is malformed or signature is missing/invalid [ 1.163103] usb 1-1: new high-speed USB device number 2 using ehci-pci [ 1.179195] usb 2-1: new high-speed USB device number 2 using ehci-pci [ 1.187090] usb 3-3: new high-speed USB device number 2 using xhci_hcd [ 1.223795] ata3: SATA link up 6.0 Gbps (SStatus 133 SControl 300) [ 1.224310] ata6: SATA link down (SStatus 0 SControl 300) [ 1.224450] ata4: SATA link down (SStatus 0 SControl 300) [ 1.224607] ata2: SATA link down (SStatus 0 SControl 300) [ 1.224749] ata5: SATA link down (SStatus 0 SControl 300) [ 1.224913] ata1: SATA link down (SStatus 0 SControl 300) [ 1.225073] ata3.00: ATA-10: HGST HUS722T1TALA604, RAGNWA05, max UDMA/133 [ 1.291560] usb 1-1: New USB device found, idVendor=8087, idProduct=8008, bcdDevice= 0.05 [ 1.291716] usb 1-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0 [ 1.292088] hub 1-1:1.0: USB hub found [ 1.292309] hub 1-1:1.0: 4 ports detected [ 1.306771] ata3.00: 1953525168 sectors, multi 16: LBA48 NCQ (depth 32), AA [ 1.307003] ata3.00: Features: NCQ-sndrcv NCQ-prio [ 1.307616] usb 2-1: New USB device found, idVendor=8087, idProduct=8000, bcdDevice= 0.05 [ 1.307893] usb 2-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0 [ 1.308339] hub 2-1:1.0: USB hub found [ 1.308561] hub 2-1:1.0: 4 ports detected [ 1.314761] usb 3-3: New USB device found, idVendor=05e3, idProduct=0610, bcdDevice=32.98 [ 1.314917] usb 3-3: New USB device strings: Mfr=0, Product=1, SerialNumber=0 [ 1.315041] usb 3-3: Product: USB2.0 Hub [ 1.315969] hub 3-3:1.0: USB hub found [ 1.316575] hub 3-3:1.0: 4 ports detected [ 1.334664] ata3.00: configured for UDMA/133 [ 1.334908] scsi 2:0:0:0: Direct-Access ATA HGST HUS722T1TAL WA05 PQ: 0 ANSI: 5 [ 1.335505] sd 2:0:0:0: Attached scsi generic sg0 type 0 [ 1.335623] sd 2:0:0:0: [sda] 1953525168 512-byte logical blocks: (1.00 TB/932 GiB) [ 1.335827] sd 2:0:0:0: [sda] Write Protect is off [ 1.335950] sd 2:0:0:0: [sda] Mode Sense: 00 3a 00 00 [ 1.336010] sd 2:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 1.336257] sd 2:0:0:0: [sda] Preferred minimum I/O size 512 bytes [ 1.355776] sda: sda1 sda2 < sda5 > [ 1.356144] sd 2:0:0:0: [sda] Attached SCSI disk [ 1.357391] Freeing unused kernel image (initmem) memory: 1576K [ 1.357520] Write protecting the kernel read-only data: 22528k [ 1.375525] Freeing unused kernel image (text/rodata gap) memory: 2032K [ 1.376832] Freeing unused kernel image (rodata/data gap) memory: 1568K [ 1.433115] usb 3-4: new high-speed USB device number 3 using xhci_hcd [ 1.559405] usb 3-4: New USB device found, idVendor=0557, idProduct=7000, bcdDevice= 0.00 [ 1.559561] usb 3-4: New USB device strings: Mfr=0, Product=0, SerialNumber=0 [ 1.560210] hub 3-4:1.0: USB hub found [ 1.560424] hub 3-4:1.0: 4 ports detected [ 1.623105] usb 3-3.2: new high-speed USB device number 4 using xhci_hcd [ 1.700621] usb 3-3.2: New USB device found, idVendor=05e3, idProduct=0610, bcdDevice=32.98 [ 1.700777] usb 3-3.2: New USB device strings: Mfr=0, Product=1, SerialNumber=0 [ 1.700923] usb 3-3.2: Product: USB2.0 Hub [ 1.701583] hub 3-3.2:1.0: USB hub found [ 1.702047] hub 3-3.2:1.0: 4 ports detected [ 1.838596] x86/mm: Checked W+X mappings: passed, no W+X pages found. [ 1.838726] Run /init as init process [ 1.838837] with arguments: [ 1.838838] /init [ 1.838839] placeholder [ 1.838840] with environment: [ 1.838841] HOME=/ [ 1.838842] TERM=linux [ 1.853120] usb 3-4.1: new low-speed USB device number 5 using xhci_hcd [ 1.958508] usb 3-4.1: New USB device found, idVendor=0557, idProduct=2419, bcdDevice= 1.00 [ 1.958670] usb 3-4.1: New USB device strings: Mfr=0, Product=0, SerialNumber=0 [ 1.964501] input: HID 0557:2419 as /devices/pci0000:00/0000:00:14.0/usb3/3-4/3-4.1/3-4.1:1.0/0003:0557:2419.0001/input/input2 [ 2.017518] hid-generic 0003:0557:2419.0001: input,hidraw0: USB HID v1.00 Keyboard [HID 0557:2419] on usb-0000:00:14.0-4.1/input0 [ 2.020692] input: HID 0557:2419 as /devices/pci0000:00/0000:00:14.0/usb3/3-4/3-4.1/3-4.1:1.1/0003:0557:2419.0002/input/input3 [ 2.021127] hid-generic 0003:0557:2419.0002: input,hidraw1: USB HID v1.00 Mouse [HID 0557:2419] on usb-0000:00:14.0-4.1/input1 [ 2.289607] ixgbe: Intel(R) 10 Gigabit PCI Express Network Driver [ 2.289785] ixgbe: Copyright (c) 1999-2016 Intel Corporation. [ 2.290223] ACPI Warning: \_SB.PCI0.BR2C._PRT: Return Package has no elements (empty) (20220331/nsprepkg-94) [ 2.290692] xen: registering gsi 16 triggering 0 polarity 1 [ 2.290705] Already setup the GSI :16 [ 2.294133] igb: Intel(R) Gigabit Ethernet Network Driver [ 2.294261] igb: Copyright (c) 2007-2014 Intel Corporation. [ 2.294466] xen: registering gsi 16 triggering 0 polarity 1 [ 2.294474] Already setup the GSI :16 [ 2.320930] pps pps0: new PPS source ptp0 [ 2.321203] igb 0000:07:00.0: added PHC on eth0 [ 2.321344] igb 0000:07:00.0: Intel(R) Gigabit Ethernet Network Connection [ 2.321466] igb 0000:07:00.0: eth0: (PCIe:2.5Gb/s:Width x1) 0c:c4:7a:9f:87:be [ 2.321632] igb 0000:07:00.0: eth0: PBA No: 010C00-000 [ 2.321748] igb 0000:07:00.0: Using MSI-X interrupts. 4 rx queue(s), 4 tx queue(s) [ 2.321995] xen: registering gsi 17 triggering 0 polarity 1 [ 2.322004] Already setup the GSI :17 [ 2.351584] pps pps1: new PPS source ptp1 [ 2.351827] igb 0000:08:00.0: added PHC on eth1 [ 2.351998] igb 0000:08:00.0: Intel(R) Gigabit Ethernet Network Connection [ 2.352171] igb 0000:08:00.0: eth1: (PCIe:2.5Gb/s:Width x1) 0c:c4:7a:9f:87:bf [ 2.352376] igb 0000:08:00.0: eth1: PBA No: 010000-000 [ 2.352527] igb 0000:08:00.0: Using MSI-X interrupts. 4 rx queue(s), 4 tx queue(s) [ 2.352838] xen: registering gsi 16 triggering 0 polarity 1 [ 2.352851] Already setup the GSI :16 [ 2.410855] igb 0000:0b:00.0: added PHC on eth2 [ 2.411011] igb 0000:0b:00.0: Intel(R) Gigabit Ethernet Network Connection [ 2.411152] igb 0000:0b:00.0: eth2: (PCIe:5.0Gb/s:Width x4) 0c:c4:7a:9f:87:c0 [ 2.411357] igb 0000:0b:00.0: eth2: PBA No: 010000-000 [ 2.411473] igb 0000:0b:00.0: Using MSI-X interrupts. 8 rx queue(s), 8 tx queue(s) [ 2.411704] xen: registering gsi 17 triggering 0 polarity 1 [ 2.411712] Already setup the GSI :17 [ 2.466968] igb 0000:0b:00.1: added PHC on eth3 [ 2.467138] igb 0000:0b:00.1: Intel(R) Gigabit Ethernet Network Connection [ 2.467278] igb 0000:0b:00.1: eth3: (PCIe:5.0Gb/s:Width x4) 0c:c4:7a:9f:87:c1 [ 2.467486] igb 0000:0b:00.1: eth3: PBA No: 010000-000 [ 2.467606] igb 0000:0b:00.1: Using MSI-X interrupts. 8 rx queue(s), 8 tx queue(s) [ 2.467836] xen: registering gsi 18 triggering 0 polarity 1 [ 2.467844] Already setup the GSI :18 [ 2.524235] igb 0000:0b:00.2: added PHC on eth4 [ 2.524384] igb 0000:0b:00.2: Intel(R) Gigabit Ethernet Network Connection [ 2.524506] igb 0000:0b:00.2: eth4: (PCIe:5.0Gb/s:Width x4) 0c:c4:7a:9f:87:c2 [ 2.524709] igb 0000:0b:00.2: eth4: PBA No: 010000-000 [ 2.524832] igb 0000:0b:00.2: Using MSI-X interrupts. 8 rx queue(s), 8 tx queue(s) [ 2.525106] xen: registering gsi 19 triggering 0 polarity 1 [ 2.525116] Already setup the GSI :19 [ 2.583233] igb 0000:0b:00.3: added PHC on eth5 [ 2.583376] igb 0000:0b:00.3: Intel(R) Gigabit Ethernet Network Connection [ 2.583498] igb 0000:0b:00.3: eth5: (PCIe:5.0Gb/s:Width x4) 0c:c4:7a:9f:87:c3 [ 2.583702] igb 0000:0b:00.3: eth5: PBA No: 010000-000 [ 2.583818] igb 0000:0b:00.3: Using MSI-X interrupts. 8 rx queue(s), 8 tx queue(s) [ 2.586996] igb 0000:07:00.0 enx0cc47a9f87be: renamed from eth0 [ 2.602515] igb 0000:0b:00.1 enx0cc47a9f87c1: renamed from eth3 [ 2.610327] igb 0000:08:00.0 enx0cc47a9f87bf: renamed from eth1 [ 2.620278] igb 0000:0b:00.0 enx0cc47a9f87c0: renamed from eth2 [ 2.627293] igb 0000:0b:00.2 enx0cc47a9f87c2: renamed from eth4 [ 2.645718] igb 0000:0b:00.3 enx0cc47a9f87c3: renamed from eth5 [ 3.032602] ixgbe 0000:04:00.0: Multiqueue Enabled: Rx Queue count = 8, Tx Queue count = 8 XDP Queue count = 0 [ 3.162316] ixgbe 0000:04:00.0: MAC: 5, PHY: 0, PBA No: 020B00-000 [ 3.162522] ixgbe 0000:04:00.0: 0c:c4:7a:9f:8f:b6 [ 3.457855] ixgbe 0000:04:00.0: Intel(R) 10 Gigabit Network Connection [ 3.458230] ACPI Warning: \_SB.PCI0.BR2C._PRT: Return Package has no elements (empty) (20220331/nsprepkg-94) [ 3.458479] xen: registering gsi 17 triggering 0 polarity 1 [ 3.458490] Already setup the GSI :17 [ 4.196220] ixgbe 0000:04:00.1: Multiqueue Enabled: Rx Queue count = 8, Tx Queue count = 8 XDP Queue count = 0 [ 4.328244] ixgbe 0000:04:00.1: MAC: 5, PHY: 0, PBA No: 020B00-000 [ 4.328486] ixgbe 0000:04:00.1: 0c:c4:7a:9f:8f:b7 [ 4.623691] ixgbe 0000:04:00.1: Intel(R) 10 Gigabit Network Connection [ 4.626704] ixgbe 0000:04:00.1 enx0cc47a9f8fb7: renamed from eth1 [ 4.634671] ixgbe 0000:04:00.0 enx0cc47a9f8fb6: renamed from eth0 [ 5.023673] EXT4-fs (dm-0): mounting ext3 file system using the ext4 subsystem [ 5.032071] EXT4-fs (dm-0): mounted filesystem with ordered data mode. Quota mode: none. [ 8.608765] EXT4-fs (dm-0): re-mounted. Quota mode: none. [ 9.814248] EXT4-fs (sda1): mounting ext3 file system using the ext4 subsystem [ 9.834508] EXT4-fs (sda1): mounted filesystem with ordered data mode. Quota mode: none. [ 9.921258] Adding 1949692k swap on /dev/mapper/debina0--vg-swap_1. Priority:-2 extents:1 across:1949692k [ 11.401886] xenbr0: port 1(enx0cc47a9f87be) entered blocking state [ 11.402111] xenbr0: port 1(enx0cc47a9f87be) entered disabled state [ 11.402291] device enx0cc47a9f87be entered promiscuous mode [ 14.932729] igb 0000:07:00.0 enx0cc47a9f87be: igb: enx0cc47a9f87be NIC Link is Up 1000 Mbps Full Duplex, Flow Control: RX [ 15.041384] IPv6: ADDRCONF(NETDEV_CHANGE): enx0cc47a9f87be: link becomes ready [ 15.041602] xenbr0: port 1(enx0cc47a9f87be) entered blocking state [ 15.041727] xenbr0: port 1(enx0cc47a9f87be) entered forwarding state [ 15.042002] IPv6: ADDRCONF(NETDEV_CHANGE): xenbr0: link becomes ready