[ 0.000000] microcode: microcode updated early to revision 0x42e, date = 2019-03-14 [ 0.000000] Linux version 6.1.0-21-amd64 (debian-kernel@lists.debian.org) (gcc-12 (Debian 12.2.0-14) 12.2.0, GNU ld (GNU Binutils for Debian) 2.40) #1 SMP PREEMPT_DYNAMIC Debian 6.1.90-1 (2024-05-03) [ 0.000000] Command line: BOOT_IMAGE=/vmlinuz-6.1.0-21-amd64 root=/dev/mapper/fiano0--vg-root ro console=ttyS0,115200n8 [ 0.000000] BIOS-provided physical RAM map: [ 0.000000] BIOS-e820: [mem 0x0000000000000000-0x000000000009abff] usable [ 0.000000] BIOS-e820: [mem 0x000000000009ac00-0x000000000009ffff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000000e0000-0x00000000000fffff] reserved [ 0.000000] BIOS-e820: [mem 0x0000000000100000-0x000000007de2bfff] usable [ 0.000000] BIOS-e820: [mem 0x000000007de2c000-0x000000007debafff] reserved [ 0.000000] BIOS-e820: [mem 0x000000007debb000-0x000000007dfc3fff] ACPI data [ 0.000000] BIOS-e820: [mem 0x000000007dfc4000-0x000000007e1e0fff] ACPI NVS [ 0.000000] BIOS-e820: [mem 0x000000007e1e1000-0x000000007f36afff] reserved [ 0.000000] BIOS-e820: [mem 0x000000007f36b000-0x000000007f7fffff] ACPI NVS [ 0.000000] BIOS-e820: [mem 0x0000000080000000-0x000000008fffffff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000fed1c000-0x00000000fed3ffff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000ff000000-0x00000000ffffffff] reserved [ 0.000000] BIOS-e820: [mem 0x0000000100000000-0x000000027fffffff] usable [ 0.000000] NX (Execute Disable) protection: active [ 0.000000] SMBIOS 2.7 present. [ 0.000000] DMI: Supermicro X9DBL-3F/X9DBL-iF/X9DBL-3F/X9DBL-iF, BIOS 3.00 12/06/2013 [ 0.000000] tsc: Fast TSC calibration using PIT [ 0.000000] tsc: Detected 1800.040 MHz processor [ 0.000874] e820: update [mem 0x00000000-0x00000fff] usable ==> reserved [ 0.000878] e820: remove [mem 0x000a0000-0x000fffff] usable [ 0.000888] last_pfn = 0x280000 max_arch_pfn = 0x400000000 [ 0.001028] x86/PAT: Configuration [0-7]: WB WC UC- UC WB WP UC- WT [ 0.001676] e820: update [mem 0x80000000-0xffffffff] usable ==> reserved [ 0.001686] last_pfn = 0x7de2c max_arch_pfn = 0x400000000 [ 0.018709] found SMP MP-table at [mem 0x000fd8e0-0x000fd8ef] [ 0.018735] Using GB pages for direct mapping [ 0.018978] RAMDISK: [mem 0x3329b000-0x35944fff] [ 0.018986] ACPI: Early table checksum verification disabled [ 0.018990] ACPI: RSDP 0x00000000000F04A0 000024 (v02 SUPERM) [ 0.018997] ACPI: XSDT 0x000000007DEF1088 00008C (v01 SUPERM SMCI--MB 00000001 AMI 00010013) [ 0.019006] ACPI: FACP 0x000000007DEFBAB0 0000F4 (v04 SUPERM SMCI--MB 00000001 AMI 00010013) [ 0.019014] ACPI: DSDT 0x000000007DEF11A0 00A910 (v02 SUPERM SMCI--MB 00000000 INTL 20091112) [ 0.019019] ACPI: FACS 0x000000007E1D8080 000040 [ 0.019024] ACPI: APIC 0x000000007DEFBBA8 000090 (v03 00000001 AMI 00010013) [ 0.019029] ACPI: FPDT 0x000000007DEFBC38 000044 (v01 00000001 AMI 00010013) [ 0.019034] ACPI: HPET 0x000000007DEFBC80 000038 (v01 SUPERM SMCI--MB 00000001 AMI. 00000005) [ 0.019039] ACPI: PRAD 0x000000007DEFBCB8 0000BE (v02 PRADID PRADTID 00000001 MSFT 04000000) [ 0.019044] ACPI: SPMI 0x000000007DEFBD78 000040 (v05 A M I OEMSPMI 00000000 AMI. 00000000) [ 0.019049] ACPI: SSDT 0x000000007DEFBDB8 0C7AE8 (v02 INTEL CpuPm 00004000 INTL 20091112) [ 0.019054] ACPI: EINJ 0x000000007DFC38A0 000130 (v01 AMI AMI EINJ 00000000 00000000) [ 0.019060] ACPI: ERST 0x000000007DFC39D0 000230 (v01 AMIER AMI ERST 00000000 00000000) [ 0.019065] ACPI: HEST 0x000000007DFC3C00 0000A8 (v01 AMI AMI HEST 00000000 00000000) [ 0.019070] ACPI: BERT 0x000000007DFC3CA8 000030 (v01 AMI AMI BERT 00000000 00000000) [ 0.019075] ACPI: DMAR 0x000000007DFC3CD8 0000B4 (v01 A M I OEMDMAR 00000001 INTL 00000001) [ 0.019080] ACPI: MCFG 0x000000007DFC3D90 00003C (v01 SUPERM SMCI--MB 00000001 MSFT 00000097) [ 0.019084] ACPI: Reserving FACP table memory at [mem 0x7defbab0-0x7defbba3] [ 0.019086] ACPI: Reserving DSDT table memory at [mem 0x7def11a0-0x7defbaaf] [ 0.019088] ACPI: Reserving FACS table memory at [mem 0x7e1d8080-0x7e1d80bf] [ 0.019089] ACPI: Reserving APIC table memory at [mem 0x7defbba8-0x7defbc37] [ 0.019090] ACPI: Reserving FPDT table memory at [mem 0x7defbc38-0x7defbc7b] [ 0.019092] ACPI: Reserving HPET table memory at [mem 0x7defbc80-0x7defbcb7] [ 0.019093] ACPI: Reserving PRAD table memory at [mem 0x7defbcb8-0x7defbd75] [ 0.019095] ACPI: Reserving SPMI table memory at [mem 0x7defbd78-0x7defbdb7] [ 0.019096] ACPI: Reserving SSDT table memory at [mem 0x7defbdb8-0x7dfc389f] [ 0.019097] ACPI: Reserving EINJ table memory at [mem 0x7dfc38a0-0x7dfc39cf] [ 0.019099] ACPI: Reserving ERST table memory at [mem 0x7dfc39d0-0x7dfc3bff] [ 0.019100] ACPI: Reserving HEST table memory at [mem 0x7dfc3c00-0x7dfc3ca7] [ 0.019101] ACPI: Reserving BERT table memory at [mem 0x7dfc3ca8-0x7dfc3cd7] [ 0.019103] ACPI: Reserving DMAR table memory at [mem 0x7dfc3cd8-0x7dfc3d8b] [ 0.019104] ACPI: Reserving MCFG table memory at [mem 0x7dfc3d90-0x7dfc3dcb] [ 0.019174] No NUMA configuration found [ 0.019176] Faking a node at [mem 0x0000000000000000-0x000000027fffffff] [ 0.019192] NODE_DATA(0) allocated [mem 0x27ffd5000-0x27fffffff] [ 0.019661] Zone ranges: [ 0.019663] DMA [mem 0x0000000000001000-0x0000000000ffffff] [ 0.019665] DMA32 [mem 0x0000000001000000-0x00000000ffffffff] [ 0.019668] Normal [mem 0x0000000100000000-0x000000027fffffff] [ 0.019670] Device empty [ 0.019672] Movable zone start for each node [ 0.019676] Early memory node ranges [ 0.019677] node 0: [mem 0x0000000000001000-0x0000000000099fff] [ 0.019679] node 0: [mem 0x0000000000100000-0x000000007de2bfff] [ 0.019681] node 0: [mem 0x0000000100000000-0x000000027fffffff] [ 0.019685] Initmem setup node 0 [mem 0x0000000000001000-0x000000027fffffff] [ 0.019692] On node 0, zone DMA: 1 pages in unavailable ranges [ 0.019748] On node 0, zone DMA: 102 pages in unavailable ranges [ 0.027860] On node 0, zone Normal: 8660 pages in unavailable ranges [ 0.028155] ACPI: PM-Timer IO Port: 0x408 [ 0.028167] ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1]) [ 0.028170] ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1]) [ 0.028171] ACPI: LAPIC_NMI (acpi_id[0x02] high edge lint[0x1]) [ 0.028172] ACPI: LAPIC_NMI (acpi_id[0x03] high edge lint[0x1]) [ 0.028185] IOAPIC[0]: apic_id 0, version 32, address 0xfec00000, GSI 0-23 [ 0.028191] IOAPIC[1]: apic_id 2, version 32, address 0xfec01000, GSI 24-47 [ 0.028195] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl) [ 0.028198] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level) [ 0.028205] ACPI: Using ACPI (MADT) for SMP configuration information [ 0.028207] ACPI: HPET id: 0x8086a701 base: 0xfed00000 [ 0.028214] TSC deadline timer available [ 0.028216] smpboot: Allowing 4 CPUs, 0 hotplug CPUs [ 0.028236] PM: hibernation: Registered nosave memory: [mem 0x00000000-0x00000fff] [ 0.028239] PM: hibernation: Registered nosave memory: [mem 0x0009a000-0x0009afff] [ 0.028241] PM: hibernation: Registered nosave memory: [mem 0x0009b000-0x0009ffff] [ 0.028242] PM: hibernation: Registered nosave memory: [mem 0x000a0000-0x000dffff] [ 0.028243] PM: hibernation: Registered nosave memory: [mem 0x000e0000-0x000fffff] [ 0.028246] PM: hibernation: Registered nosave memory: [mem 0x7de2c000-0x7debafff] [ 0.028247] PM: hibernation: Registered nosave memory: [mem 0x7debb000-0x7dfc3fff] [ 0.028248] PM: hibernation: Registered nosave memory: [mem 0x7dfc4000-0x7e1e0fff] [ 0.028250] PM: hibernation: Registered nosave memory: [mem 0x7e1e1000-0x7f36afff] [ 0.028251] PM: hibernation: Registered nosave memory: [mem 0x7f36b000-0x7f7fffff] [ 0.028252] PM: hibernation: Registered nosave memory: [mem 0x7f800000-0x7fffffff] [ 0.028253] PM: hibernation: Registered nosave memory: [mem 0x80000000-0x8fffffff] [ 0.028254] PM: hibernation: Registered nosave memory: [mem 0x90000000-0xfed1bfff] [ 0.028256] PM: hibernation: Registered nosave memory: [mem 0xfed1c000-0xfed3ffff] [ 0.028257] PM: hibernation: Registered nosave memory: [mem 0xfed40000-0xfeffffff] [ 0.028258] PM: hibernation: Registered nosave memory: [mem 0xff000000-0xffffffff] [ 0.028260] [mem 0x90000000-0xfed1bfff] available for PCI devices [ 0.028262] Booting paravirtualized kernel on bare hardware [ 0.028266] clocksource: refined-jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645519600211568 ns [ 0.035719] setup_percpu: NR_CPUS:8192 nr_cpumask_bits:4 nr_cpu_ids:4 nr_node_ids:1 [ 0.036111] percpu: Embedded 61 pages/cpu s212992 r8192 d28672 u524288 [ 0.036119] pcpu-alloc: s212992 r8192 d28672 u524288 alloc=1*2097152 [ 0.036123] pcpu-alloc: [0] 0 1 2 3 [ 0.036163] Fallback order for Node 0: 0 [ 0.036168] Built 1 zonelists, mobility grouping on. Total pages: 2055603 [ 0.036170] Policy zone: Normal [ 0.036172] Kernel command line: BOOT_IMAGE=/vmlinuz-6.1.0-21-amd64 root=/dev/mapper/fiano0--vg-root ro console=ttyS0,115200n8 [ 0.036242] Unknown kernel command line parameters "BOOT_IMAGE=/vmlinuz-6.1.0-21-amd64", will be passed to user space. [ 0.036257] random: crng init done [ 0.037312] Dentry cache hash table entries: 1048576 (order: 11, 8388608 bytes, linear) [ 0.037882] Inode-cache hash table entries: 524288 (order: 10, 4194304 bytes, linear) [ 0.037971] mem auto-init: stack:all(zero), heap alloc:on, heap free:off [ 0.037983] software IO TLB: area num 4. [ 0.079878] Memory: 2087172K/8353556K available (14342K kernel code, 2332K rwdata, 9060K rodata, 2796K init, 17404K bss, 304404K reserved, 0K cma-reserved) [ 0.080094] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1 [ 0.080115] Kernel/User page tables isolation: enabled [ 0.080167] ftrace: allocating 40220 entries in 158 pages [ 0.090503] ftrace: allocated 158 pages with 5 groups [ 0.091453] Dynamic Preempt: voluntary [ 0.091496] rcu: Preemptible hierarchical RCU implementation. [ 0.091498] rcu: RCU restricting CPUs from NR_CPUS=8192 to nr_cpu_ids=4. [ 0.091500] Trampoline variant of Tasks RCU enabled. [ 0.091500] Rude variant of Tasks RCU enabled. [ 0.091501] Tracing variant of Tasks RCU enabled. [ 0.091502] rcu: RCU calculated value of scheduler-enlistment delay is 25 jiffies. [ 0.091503] rcu: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=4 [ 0.098830] NR_IRQS: 524544, nr_irqs: 864, preallocated irqs: 16 [ 0.099038] rcu: srcu_init: Setting srcu_struct sizes based on contention. [ 0.103551] Console: colour VGA+ 80x25 [ 1.027912] printk: console [ttyS0] enabled [ 1.032119] ACPI: Core revision 20220331 [ 1.036770] clocksource: hpet: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 133484882848 ns [ 1.045909] APIC: Switch to symmetric I/O mode setup [ 1.050890] DMAR: Host address width 46 [ 1.054738] DMAR: DRHD base: 0x000000fbffc000 flags: 0x1 [ 1.060064] DMAR: dmar0: reg_base_addr fbffc000 ver 1:0 cap d2078c106f0466 ecap f020de [ 1.067986] DMAR: RMRR base: 0x0000007de91000 end: 0x0000007de9dfff [ 1.074260] DMAR: ATSR flags: 0x0 [ 1.077571] DMAR: RHSA base: 0x000000fbffc000 proximity domain: 0x0 [ 1.083839] DMAR-IR: IOAPIC id 0 under DRHD base 0xfbffc000 IOMMU 0 [ 1.090199] DMAR-IR: IOAPIC id 2 under DRHD base 0xfbffc000 IOMMU 0 [ 1.096560] DMAR-IR: HPET id 0 under DRHD base 0xfbffc000 [ 1.101967] DMAR-IR: Queued invalidation will be enabled to support x2apic and Intr-remapping. [ 1.111098] DMAR-IR: Enabled IRQ remapping in x2apic mode [ 1.116493] x2apic enabled [ 1.119212] Switched APIC routing to cluster x2apic. [ 1.124721] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1 [ 1.149906] clocksource: tsc-early: mask: 0xffffffffffffffff max_cycles: 0x19f24f75470, max_idle_ns: 440795248083 ns [ 1.160421] Calibrating delay loop (skipped), value calculated using timer frequency.. 3600.08 BogoMIPS (lpj=7200160) [ 1.164451] CPU0: Thermal monitoring enabled (TM1) [ 1.168505] process: using mwait in idle threads [ 1.172422] Last level iTLB entries: 4KB 512, 2MB 8, 4MB 8 [ 1.176419] Last level dTLB entries: 4KB 512, 2MB 0, 4MB 0, 1GB 4 [ 1.180422] Spectre V1 : Mitigation: usercopy/swapgs barriers and __user pointer sanitization [ 1.184421] Spectre V2 : Mitigation: Retpolines [ 1.188419] Spectre V2 : Spectre v2 / SpectreRSB mitigation: Filling RSB on context switch [ 1.192419] Spectre V2 : Spectre v2 / SpectreRSB : Filling RSB on VMEXIT [ 1.196419] Spectre V2 : Enabling Restricted Speculation for firmware calls [ 1.200421] Spectre V2 : mitigation: Enabling conditional Indirect Branch Prediction Barrier [ 1.204420] Speculative Store Bypass: Mitigation: Speculative Store Bypass disabled via prctl [ 1.208420] MDS: Mitigation: Clear CPU buffers [ 1.212419] MMIO Stale Data: Unknown: No mitigations [ 1.216424] x86/fpu: Supporting XSAVE feature 0x001: 'x87 floating point registers' [ 1.220419] x86/fpu: Supporting XSAVE feature 0x002: 'SSE registers' [ 1.224419] x86/fpu: Supporting XSAVE feature 0x004: 'AVX registers' [ 1.228420] x86/fpu: xstate_offset[2]: 576, xstate_sizes[2]: 256 [ 1.232419] x86/fpu: Enabled xstate features 0x7, context size is 832 bytes, using 'standard' format. [ 1.261225] Freeing SMP alternatives memory: 36K [ 1.264420] pid_max: default: 32768 minimum: 301 [ 1.268452] LSM: Security Framework initializing [ 1.272438] landlock: Up and running. [ 1.276419] Yama: disabled by default; enable with sysctl kernel.yama.* [ 1.280450] AppArmor: AppArmor initialized [ 1.284421] TOMOYO Linux initialized [ 1.288426] LSM support for eBPF active [ 1.292465] Mount-cache hash table entries: 16384 (order: 5, 131072 bytes, linear) [ 1.296435] Mountpoint-cache hash table entries: 16384 (order: 5, 131072 bytes, linear) [ 1.301049] smpboot: CPU0: Intel(R) Xeon(R) CPU E5-2403 v2 @ 1.80GHz (family: 0x6, model: 0x3e, stepping: 0x4) [ 1.304610] cblist_init_generic: Setting adjustable number of callback queues. [ 1.308420] cblist_init_generic: Setting shift to 2 and lim to 1. [ 1.312451] cblist_init_generic: Setting adjustable number of callback queues. [ 1.316420] cblist_init_generic: Setting shift to 2 and lim to 1. [ 1.320442] cblist_init_generic: Setting adjustable number of callback queues. [ 1.324420] cblist_init_generic: Setting shift to 2 and lim to 1. [ 1.328440] Performance Events: PEBS fmt1+, IvyBridge events, 16-deep LBR, full-width counters, Intel PMU driver. [ 1.332421] ... version: 3 [ 1.336419] ... bit width: 48 [ 1.340419] ... generic registers: 8 [ 1.344419] ... value mask: 0000ffffffffffff [ 1.348419] ... max period: 00007fffffffffff [ 1.352419] ... fixed-purpose events: 3 [ 1.356419] ... event mask: 00000007000000ff [ 1.360654] signal: max sigframe size: 1776 [ 1.364444] Estimated ratio of average max frequency by base frequency (times 1024): 1024 [ 1.368453] rcu: Hierarchical SRCU implementation. [ 1.372420] rcu: Max phase no-delay instances is 1000. [ 1.377099] NMI watchdog: Enabled. Permanently consumes one hw-PMU counter. [ 1.380512] smp: Bringing up secondary CPUs ... [ 1.384568] x86: Booting SMP configuration: [ 1.388425] .... node #0, CPUs: #1 #2 #3 [ 1.403630] smp: Brought up 1 node, 4 CPUs [ 1.408421] smpboot: Max logical packages: 1 [ 1.412420] smpboot: Total of 4 processors activated (14400.32 BogoMIPS) [ 1.436497] node 0 deferred pages initialised in 20ms [ 1.440865] devtmpfs: initialized [ 1.444501] x86/mm: Memory block size: 128MB [ 1.449465] ACPI: PM: Registering ACPI NVS region [mem 0x7dfc4000-0x7e1e0fff] (2215936 bytes) [ 1.452471] ACPI: PM: Registering ACPI NVS region [mem 0x7f36b000-0x7f7fffff] (4804608 bytes) [ 1.456574] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645041785100000 ns [ 1.460433] futex hash table entries: 1024 (order: 4, 65536 bytes, linear) [ 1.464482] pinctrl core: initialized pinctrl subsystem [ 1.469314] NET: Registered PF_NETLINK/PF_ROUTE protocol family [ 1.472698] DMA: preallocated 1024 KiB GFP_KERNEL pool for atomic allocations [ 1.476572] DMA: preallocated 1024 KiB GFP_KERNEL|GFP_DMA pool for atomic allocations [ 1.480570] DMA: preallocated 1024 KiB GFP_KERNEL|GFP_DMA32 pool for atomic allocations [ 1.484430] audit: initializing netlink subsys (disabled) [ 1.488434] audit: type=2000 audit(1719199298.400:1): state=initialized audit_enabled=0 res=1 [ 1.488572] thermal_sys: Registered thermal governor 'fair_share' [ 1.492423] thermal_sys: Registered thermal governor 'bang_bang' [ 1.496420] thermal_sys: Registered thermal governor 'step_wise' [ 1.500420] thermal_sys: Registered thermal governor 'user_space' [ 1.504419] thermal_sys: Registered thermal governor 'power_allocator' [ 1.508437] cpuidle: using governor ladder [ 1.516424] cpuidle: using governor menu [ 1.520396] ACPI FADT declares the system doesn't support PCIe ASPM, so disable it [ 1.520421] acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5 [ 1.524524] PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0x80000000-0x8fffffff] (base 0x80000000) [ 1.528423] PCI: MMCONFIG at [mem 0x80000000-0x8fffffff] reserved in E820 [ 1.532429] pmd_set_huge: Cannot satisfy [mem 0x80000000-0x80200000] with a huge-page mapping due to MTRR override. [ 1.536842] PCI: Using configuration type 1 for base access [ 1.540518] core: PMU erratum BJ122, BV98, HSD29 workaround disabled, HT off [ 1.545759] kprobes: kprobe jump-optimization is enabled. All kprobes are optimized if possible. [ 1.548467] HugeTLB: registered 1.00 GiB page size, pre-allocated 0 pages [ 1.552422] HugeTLB: 16380 KiB vmemmap can be freed for a 1.00 GiB page [ 1.560423] HugeTLB: registered 2.00 MiB page size, pre-allocated 0 pages [ 1.568420] HugeTLB: 28 KiB vmemmap can be freed for a 2.00 MiB page [ 1.572578] ACPI: Added _OSI(Module Device) [ 1.576423] ACPI: Added _OSI(Processor Device) [ 1.580420] ACPI: Added _OSI(3.0 _SCP Extensions) [ 1.588421] ACPI: Added _OSI(Processor Aggregator Device) [ 1.707532] ACPI: 2 ACPI AML tables successfully acquired and loaded [ 1.738008] ACPI: Interpreter enabled [ 1.740442] ACPI: PM: (supports S0 S1 S4 S5) [ 1.744420] ACPI: Using IOAPIC for interrupt routing [ 1.752527] HEST: Table parsing has been initialized. [ 1.756543] GHES: APEI firmware first mode is enabled by WHEA _OSC. [ 1.760424] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug [ 1.772420] PCI: Using E820 reservations for host bridge windows [ 1.776982] ACPI: Enabled 5 GPEs in block 00 to 3F [ 1.784531] ACPI BIOS Error (bug): Could not resolve symbol [\_SB.PRAD], AE_NOT_FOUND (20220331/psargs-330) [ 1.788424] ACPI Error: Aborting method \_GPE._L24 due to previous error (AE_NOT_FOUND) (20220331/psparse-529) [ 1.792457] ACPI Error: AE_NOT_FOUND, while evaluating GPE method [_L24] (20220331/evgpe-511) [ 1.792457] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-fe]) [ 1.796418] acpi PNP0A08:00: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI HPX-Type3] [ 1.808514] acpi PNP0A08:00: _OSC: platform does not support [SHPCHotplug PME AER LTR] [ 1.816576] acpi PNP0A08:00: _OSC: OS now controls [PCIeHotplug PCIeCapability] [ 1.824421] acpi PNP0A08:00: FADT indicates ASPM is unsupported, using BIOS configuration [ 1.832783] PCI host bridge to bus 0000:00 [ 1.836422] pci_bus 0000:00: root bus resource [io 0x0000-0x03af window] [ 1.844420] pci_bus 0000:00: root bus resource [io 0x03e0-0x0cf7 window] [ 1.852420] pci_bus 0000:00: root bus resource [io 0x03b0-0x03df window] [ 1.856420] pci_bus 0000:00: root bus resource [io 0x0d00-0xffff window] [ 1.864420] pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000dffff window] [ 1.872420] pci_bus 0000:00: root bus resource [mem 0xfed08000-0xfed08fff window] [ 1.880420] pci_bus 0000:00: root bus resource [mem 0xfed0e000-0xfed0ffff window] [ 1.888420] pci_bus 0000:00: root bus resource [mem 0x80000000-0xfbffffff window] [ 1.896421] pci_bus 0000:00: root bus resource [bus 00-fe] [ 1.900451] pci 0000:00:00.0: [8086:0e00] type 00 class 0x060000 [ 1.904504] pci 0000:00:00.0: PME# supported from D0 D3hot D3cold [ 1.912545] pci 0000:00:01.0: [8086:0e02] type 01 class 0x060400 [ 1.920520] pci 0000:00:01.0: PME# supported from D0 D3hot D3cold [ 1.924588] pci 0000:00:01.1: [8086:0e03] type 01 class 0x060400 [ 1.932518] pci 0000:00:01.1: PME# supported from D0 D3hot D3cold [ 1.936587] pci 0000:00:03.0: [8086:0e08] type 01 class 0x060400 [ 1.944458] pci 0000:00:03.0: enabling Extended Tags [ 1.948485] pci 0000:00:03.0: PME# supported from D0 D3hot D3cold [ 1.956574] pci 0000:00:04.0: [8086:0e20] type 00 class 0x088000 [ 1.960437] pci 0000:00:04.0: reg 0x10: [mem 0xfbb1c000-0xfbb1ffff 64bit] [ 1.968566] pci 0000:00:04.1: [8086:0e21] type 00 class 0x088000 [ 1.972436] pci 0000:00:04.1: reg 0x10: [mem 0xfbb18000-0xfbb1bfff 64bit] [ 1.980558] pci 0000:00:04.2: [8086:0e22] type 00 class 0x088000 [ 1.988436] pci 0000:00:04.2: reg 0x10: [mem 0xfbb14000-0xfbb17fff 64bit] [ 1.992555] pci 0000:00:04.3: [8086:0e23] type 00 class 0x088000 [ 2.000436] pci 0000:00:04.3: reg 0x10: [mem 0xfbb10000-0xfbb13fff 64bit] [ 2.004557] pci 0000:00:04.4: [8086:0e24] type 00 class 0x088000 [ 2.012436] pci 0000:00:04.4: reg 0x10: [mem 0xfbb0c000-0xfbb0ffff 64bit] [ 2.020555] pci 0000:00:04.5: [8086:0e25] type 00 class 0x088000 [ 2.024436] pci 0000:00:04.5: reg 0x10: [mem 0xfbb08000-0xfbb0bfff 64bit] [ 2.032555] pci 0000:00:04.6: [8086:0e26] type 00 class 0x088000 [ 2.036439] pci 0000:00:04.6: reg 0x10: [mem 0xfbb04000-0xfbb07fff 64bit] [ 2.044555] pci 0000:00:04.7: [8086:0e27] type 00 class 0x088000 [ 2.052436] pci 0000:00:04.7: reg 0x10: [mem 0xfbb00000-0xfbb03fff 64bit] [ 2.056554] pci 0000:00:05.0: [8086:0e28] type 00 class 0x088000 [ 2.064549] pci 0000:00:05.2: [8086:0e2a] type 00 class 0x088000 [ 2.068543] pci 0000:00:05.4: [8086:0e2c] type 00 class 0x080020 [ 2.076432] pci 0000:00:05.4: reg 0x10: [mem 0xfbb25000-0xfbb25fff] [ 2.084571] pci 0000:00:11.0: [8086:1d3e] type 01 class 0x060400 [ 2.088540] pci 0000:00:11.0: PME# supported from D0 D3hot D3cold [ 2.096564] pci 0000:00:16.0: [8086:1d3a] type 00 class 0x078000 [ 2.100440] pci 0000:00:16.0: reg 0x10: [mem 0xfed0e000-0xfed0e00f 64bit] [ 2.108495] pci 0000:00:16.0: PME# supported from D0 D3hot D3cold [ 2.112512] pci 0000:00:16.1: [8086:1d3b] type 00 class 0x078000 [ 2.120439] pci 0000:00:16.1: reg 0x10: [mem 0xfed0f000-0xfed0f00f 64bit] [ 2.128495] pci 0000:00:16.1: PME# supported from D0 D3hot D3cold [ 2.132524] pci 0000:00:1a.0: [8086:1d2d] type 00 class 0x0c0320 [ 2.140436] pci 0000:00:1a.0: reg 0x10: [mem 0xfbb23000-0xfbb233ff] [ 2.144511] pci 0000:00:1a.0: PME# supported from D0 D3hot D3cold [ 2.152526] pci 0000:00:1c.0: [8086:1d10] type 01 class 0x060400 [ 2.156519] pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold [ 2.164450] pci 0000:00:1c.0: Enabling MPC IRBNCE [ 2.168421] pci 0000:00:1c.0: Intel PCH root port ACS workaround enabled [ 2.176537] pci 0000:00:1c.1: [8086:1d12] type 01 class 0x060400 [ 2.180520] pci 0000:00:1c.1: PME# supported from D0 D3hot D3cold [ 2.188446] pci 0000:00:1c.1: Enabling MPC IRBNCE [ 2.192421] pci 0000:00:1c.1: Intel PCH root port ACS workaround enabled [ 2.200537] pci 0000:00:1d.0: [8086:1d26] type 00 class 0x0c0320 [ 2.204436] pci 0000:00:1d.0: reg 0x10: [mem 0xfbb22000-0xfbb223ff] [ 2.212512] pci 0000:00:1d.0: PME# supported from D0 D3hot D3cold [ 2.216523] pci 0000:00:1e.0: [8086:244e] type 01 class 0x060401 [ 2.224571] pci 0000:00:1f.0: [8086:1d41] type 00 class 0x060100 [ 2.228637] pci 0000:00:1f.2: [8086:1d02] type 00 class 0x010601 [ 2.236433] pci 0000:00:1f.2: reg 0x10: [io 0xf050-0xf057] [ 2.240426] pci 0000:00:1f.2: reg 0x14: [io 0xf040-0xf043] [ 2.248426] pci 0000:00:1f.2: reg 0x18: [io 0xf030-0xf037] [ 2.252426] pci 0000:00:1f.2: reg 0x1c: [io 0xf020-0xf023] [ 2.260426] pci 0000:00:1f.2: reg 0x20: [io 0xf000-0xf01f] [ 2.264427] pci 0000:00:1f.2: reg 0x24: [mem 0xfbb21000-0xfbb217ff] [ 2.268464] pci 0000:00:1f.2: PME# supported from D3hot [ 2.276511] pci 0000:00:1f.3: [8086:1d22] type 00 class 0x0c0500 [ 2.280438] pci 0000:00:1f.3: reg 0x10: [mem 0xfbb20000-0xfbb200ff 64bit] [ 2.288443] pci 0000:00:1f.3: reg 0x20: [io 0x1180-0x119f] [ 2.292496] pci 0000:00:1f.6: [8086:1d24] type 00 class 0x118000 [ 2.300440] pci 0000:00:1f.6: reg 0x10: [mem 0xfed08000-0xfed08fff 64bit] [ 2.308583] pci 0000:00:01.0: PCI bridge to [bus 01] [ 2.312471] pci 0000:00:01.1: PCI bridge to [bus 02] [ 2.316470] pci 0000:00:03.0: PCI bridge to [bus 03] [ 2.320503] pci 0000:04:00.0: [8086:1d6b] type 00 class 0x010700 [ 2.328443] pci 0000:04:00.0: reg 0x10: [mem 0xfa47c000-0xfa47ffff 64bit pref] [ 2.336434] pci 0000:04:00.0: reg 0x18: [mem 0xfa000000-0xfa3fffff 64bit pref] [ 2.344429] pci 0000:04:00.0: reg 0x20: [io 0xe000-0xe0ff] [ 2.348446] pci 0000:04:00.0: enabling Extended Tags [ 2.352526] pci 0000:04:00.0: reg 0x164: [mem 0xfa400000-0xfa403fff 64bit pref] [ 2.360420] pci 0000:04:00.0: VF(n) BAR0 space: [mem 0xfa400000-0xfa47bfff 64bit pref] (contains BAR0 for 31 VFs) [ 2.372675] pci 0000:00:11.0: PCI bridge to [bus 04] [ 2.376423] pci 0000:00:11.0: bridge window [io 0xe000-0xefff] [ 2.380428] pci 0000:00:11.0: bridge window [mem 0xfa000000-0xfa4fffff 64bit pref] [ 2.388518] pci 0000:05:00.0: [8086:10d3] type 00 class 0x020000 [ 2.396455] pci 0000:05:00.0: reg 0x10: [mem 0xfba00000-0xfba1ffff] [ 2.400457] pci 0000:05:00.0: reg 0x18: [io 0xd000-0xd01f] [ 2.408438] pci 0000:05:00.0: reg 0x1c: [mem 0xfba20000-0xfba23fff] [ 2.412610] pci 0000:05:00.0: PME# supported from D0 D3hot D3cold [ 2.420642] pci 0000:00:1c.0: PCI bridge to [bus 05] [ 2.424423] pci 0000:00:1c.0: bridge window [io 0xd000-0xdfff] [ 2.432422] pci 0000:00:1c.0: bridge window [mem 0xfba00000-0xfbafffff] [ 2.440522] pci 0000:06:00.0: [8086:10d3] type 00 class 0x020000 [ 2.444455] pci 0000:06:00.0: reg 0x10: [mem 0xfb900000-0xfb91ffff] [ 2.452457] pci 0000:06:00.0: reg 0x18: [io 0xc000-0xc01f] [ 2.456438] pci 0000:06:00.0: reg 0x1c: [mem 0xfb920000-0xfb923fff] [ 2.464606] pci 0000:06:00.0: PME# supported from D0 D3hot D3cold [ 2.468636] pci 0000:00:1c.1: PCI bridge to [bus 06] [ 2.472423] pci 0000:00:1c.1: bridge window [io 0xc000-0xcfff] [ 2.480422] pci 0000:00:1c.1: bridge window [mem 0xfb900000-0xfb9fffff] [ 2.488442] pci_bus 0000:07: extended config space not accessible [ 2.492445] pci 0000:07:01.0: [102b:0532] type 00 class 0x030000 [ 2.500436] pci 0000:07:01.0: reg 0x10: [mem 0xf9000000-0xf9ffffff pref] [ 2.504428] pci 0000:07:01.0: reg 0x14: [mem 0xfb800000-0xfb803fff] [ 2.512428] pci 0000:07:01.0: reg 0x18: [mem 0xfb000000-0xfb7fffff] [ 2.520466] pci 0000:07:01.0: Video device with shadowed ROM at [mem 0x000c0000-0x000dffff] [ 2.528532] pci 0000:00:1e.0: PCI bridge to [bus 07] (subtractive decode) [ 2.532424] pci 0000:00:1e.0: bridge window [mem 0xfb000000-0xfb8fffff] [ 2.540426] pci 0000:00:1e.0: bridge window [mem 0xf9000000-0xf9ffffff 64bit pref] [ 2.548420] pci 0000:00:1e.0: bridge window [io 0x0000-0x03af window] (subtractive decode) [ 2.556420] pci 0000:00:1e.0: bridge window [io 0x03e0-0x0cf7 window] (subtractive decode) [ 2.564420] pci 0000:00:1e.0: bridge window [io 0x03b0-0x03df window] (subtractive decode) [ 2.572420] pci 0000:00:1e.0: bridge window [io 0x0d00-0xffff window] (subtractive decode) [ 2.584420] pci 0000:00:1e.0: bridge window [mem 0x000a0000-0x000dffff window] (subtractive decode) [ 2.592420] pci 0000:00:1e.0: bridge window [mem 0xfed08000-0xfed08fff window] (subtractive decode) [ 2.600420] pci 0000:00:1e.0: bridge window [mem 0xfed0e000-0xfed0ffff window] (subtractive decode) [ 2.608420] pci 0000:00:1e.0: bridge window [mem 0x80000000-0xfbffffff window] (subtractive decode) [ 2.621226] ACPI: PCI Root Bridge [UNC0] (domain 0000 [bus ff]) [ 2.624424] acpi PNP0A03:00: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI HPX-Type3] [ 2.636439] acpi PNP0A03:00: _OSC: OS now controls [PCIeHotplug SHPCHotplug PME AER PCIeCapability LTR] [ 2.644420] acpi PNP0A03:00: FADT indicates ASPM is unsupported, using BIOS configuration [ 2.652488] PCI host bridge to bus 0000:ff [ 2.656421] pci_bus 0000:ff: root bus resource [bus ff] [ 2.660434] pci 0000:ff:08.0: [8086:0e80] type 00 class 0x088000 [ 2.668500] pci 0000:ff:09.0: [8086:0e90] type 00 class 0x088000 [ 2.672489] pci 0000:ff:0a.0: [8086:0ec0] type 00 class 0x088000 [ 2.680480] pci 0000:ff:0a.1: [8086:0ec1] type 00 class 0x088000 [ 2.684479] pci 0000:ff:0a.2: [8086:0ec2] type 00 class 0x088000 [ 2.692482] pci 0000:ff:0a.3: [8086:0ec3] type 00 class 0x088000 [ 2.700486] pci 0000:ff:0b.0: [8086:0e1e] type 00 class 0x088000 [ 2.704477] pci 0000:ff:0b.3: [8086:0e1f] type 00 class 0x088000 [ 2.712478] pci 0000:ff:0c.0: [8086:0ee0] type 00 class 0x088000 [ 2.716478] pci 0000:ff:0c.1: [8086:0ee2] type 00 class 0x088000 [ 2.724480] pci 0000:ff:0d.0: [8086:0ee1] type 00 class 0x088000 [ 2.728477] pci 0000:ff:0d.1: [8086:0ee3] type 00 class 0x088000 [ 2.736481] pci 0000:ff:0e.0: [8086:0ea0] type 00 class 0x088000 [ 2.740483] pci 0000:ff:0e.1: [8086:0e30] type 00 class 0x110100 [ 2.748497] pci 0000:ff:0f.0: [8086:0ea8] type 00 class 0x088000 [ 2.752508] pci 0000:ff:0f.1: [8086:0e71] type 00 class 0x088000 [ 2.760503] pci 0000:ff:0f.2: [8086:0eaa] type 00 class 0x088000 [ 2.764503] pci 0000:ff:0f.3: [8086:0eab] type 00 class 0x088000 [ 2.772502] pci 0000:ff:0f.4: [8086:0eac] type 00 class 0x088000 [ 2.776501] pci 0000:ff:0f.5: [8086:0ead] type 00 class 0x088000 [ 2.784505] pci 0000:ff:10.0: [8086:0eb0] type 00 class 0x088000 [ 2.788504] pci 0000:ff:10.1: [8086:0eb1] type 00 class 0x088000 [ 2.796511] pci 0000:ff:10.2: [8086:0eb2] type 00 class 0x088000 [ 2.800503] pci 0000:ff:10.3: [8086:0eb3] type 00 class 0x088000 [ 2.808502] pci 0000:ff:10.4: [8086:0eb4] type 00 class 0x088000 [ 2.812503] pci 0000:ff:10.5: [8086:0eb5] type 00 class 0x088000 [ 2.820508] pci 0000:ff:10.6: [8086:0eb6] type 00 class 0x088000 [ 2.824502] pci 0000:ff:10.7: [8086:0eb7] type 00 class 0x088000 [ 2.832501] pci 0000:ff:13.0: [8086:0e1d] type 00 class 0x088000 [ 2.836479] pci 0000:ff:13.1: [8086:0e34] type 00 class 0x110100 [ 2.844485] pci 0000:ff:13.4: [8086:0e81] type 00 class 0x088000 [ 2.848480] pci 0000:ff:13.5: [8086:0e36] type 00 class 0x110100 [ 2.856482] pci 0000:ff:16.0: [8086:0ec8] type 00 class 0x088000 [ 2.864479] pci 0000:ff:16.1: [8086:0ec9] type 00 class 0x088000 [ 2.868478] pci 0000:ff:16.2: [8086:0eca] type 00 class 0x088000 [ 2.876641] ACPI: PCI: Interrupt link LNKA configured for IRQ 11 [ 2.880474] ACPI: PCI: Interrupt link LNKB configured for IRQ 10 [ 2.888472] ACPI: PCI: Interrupt link LNKC configured for IRQ 5 [ 2.892471] ACPI: PCI: Interrupt link LNKD configured for IRQ 11 [ 2.900471] ACPI: PCI: Interrupt link LNKE configured for IRQ 0 [ 2.904472] ACPI: PCI: Interrupt link LNKF configured for IRQ 0 [ 2.912489] ACPI: PCI: Interrupt link LNKG configured for IRQ 0 [ 2.916472] ACPI: PCI: Interrupt link LNKH configured for IRQ 7 [ 2.926053] iommu: Default domain type: Translated [ 2.928420] iommu: DMA domain TLB invalidation policy: lazy mode [ 2.936511] pps_core: LinuxPPS API ver. 1 registered [ 2.940420] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti [ 2.948423] PTP clock support registered [ 2.952357] EDAC MC: Ver: 3.0.0 [ 2.956684] NetLabel: Initializing [ 2.960085] NetLabel: domain hash size = 128 [ 2.964422] NetLabel: protocols = UNLABELED CIPSOv4 CALIPSO [ 2.972442] NetLabel: unlabeled traffic allowed by default [ 2.976420] PCI: Using ACPI for IRQ routing [ 2.987421] PCI: pci_cache_line_size set to 64 bytes [ 2.987546] e820: reserve RAM buffer [mem 0x0009ac00-0x0009ffff] [ 2.987549] e820: reserve RAM buffer [mem 0x7de2c000-0x7fffffff] [ 2.988462] pci 0000:07:01.0: vgaarb: setting as boot VGA device [ 2.992418] pci 0000:07:01.0: vgaarb: bridge control possible [ 2.992418] pci 0000:07:01.0: vgaarb: VGA device added: decodes=io+mem,owns=io+mem,locks=none [ 3.008427] vgaarb: loaded [ 3.012959] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0, 0, 0, 0, 0, 0 [ 3.020420] hpet0: 8 comparators, 64-bit 14.318180 MHz counter [ 3.026481] clocksource: Switched to clocksource tsc-early [ 3.030107] VFS: Disk quotas dquot_6.6.0 [ 3.034050] VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes) [ 3.041118] AppArmor: AppArmor Filesystem Enabled [ 3.045852] pnp: PnP ACPI init [ 3.049060] system 00:00: [mem 0xfc000000-0xfcffffff] has been reserved [ 3.055684] system 00:00: [mem 0xfd000000-0xfdffffff] has been reserved [ 3.062301] system 00:00: [mem 0xfe000000-0xfeafffff] has been reserved [ 3.068911] system 00:00: [mem 0xfeb00000-0xfebfffff] has been reserved [ 3.075657] system 00:01: [mem 0xfbffc000-0xfbffdfff] could not be reserved [ 3.082759] system 00:03: [io 0x04d0-0x04d1] has been reserved [ 3.088682] system 00:03: [mem 0x00000400-0x000004ff] could not be reserved [ 3.095968] system 00:06: [io 0x0b00-0x0b7f] has been reserved [ 3.102088] pnp 00:07: [dma 0 disabled] [ 3.102331] pnp 00:08: [dma 0 disabled] [ 3.102611] system 00:09: [io 0x0400-0x0453] has been reserved [ 3.108538] system 00:09: [io 0x0458-0x047f] has been reserved [ 3.114455] system 00:09: [io 0x1180-0x119f] has been reserved [ 3.120375] system 00:09: [io 0x0500-0x057f] has been reserved [ 3.126296] system 00:09: [mem 0xfed1c000-0xfed1ffff] has been reserved [ 3.132907] system 00:09: [mem 0xfec00000-0xfecfffff] could not be reserved [ 3.139867] system 00:09: [mem 0xff000000-0xffffffff] has been reserved [ 3.146588] system 00:0a: [io 0x0454-0x0457] has been reserved [ 3.152795] system 00:0b: [mem 0x00000000-0x0009ffff] could not be reserved [ 3.160030] pnp: PnP ACPI: found 12 devices [ 3.170749] clocksource: acpi_pm: mask: 0xffffff max_cycles: 0xffffff, max_idle_ns: 2085701024 ns [ 3.179723] NET: Registered PF_INET protocol family [ 3.184786] IP idents hash table entries: 131072 (order: 8, 1048576 bytes, linear) [ 3.195122] tcp_listen_portaddr_hash hash table entries: 4096 (order: 4, 65536 bytes, linear) [ 3.203692] Table-perturb hash table entries: 65536 (order: 6, 262144 bytes, linear) [ 3.211525] TCP established hash table entries: 65536 (order: 7, 524288 bytes, linear) [ 3.219831] TCP bind hash table entries: 65536 (order: 9, 2097152 bytes, linear) [ 3.227622] TCP: Hash tables configured (established 65536 bind 65536) [ 3.234250] MPTCP token hash table entries: 8192 (order: 5, 196608 bytes, linear) [ 3.241802] UDP hash table entries: 4096 (order: 5, 131072 bytes, linear) [ 3.248630] UDP-Lite hash table entries: 4096 (order: 5, 131072 bytes, linear) [ 3.255914] NET: Registered PF_UNIX/PF_LOCAL protocol family [ 3.261588] NET: Registered PF_XDP protocol family [ 3.266401] pci 0000:00:01.0: PCI bridge to [bus 01] [ 3.271382] pci 0000:00:01.1: PCI bridge to [bus 02] [ 3.276354] pci 0000:00:03.0: PCI bridge to [bus 03] [ 3.281331] pci 0000:00:11.0: PCI bridge to [bus 04] [ 3.286296] pci 0000:00:11.0: bridge window [io 0xe000-0xefff] [ 3.292394] pci 0000:00:11.0: bridge window [mem 0xfa000000-0xfa4fffff 64bit pref] [ 3.300143] pci 0000:00:1c.0: PCI bridge to [bus 05] [ 3.305114] pci 0000:00:1c.0: bridge window [io 0xd000-0xdfff] [ 3.311206] pci 0000:00:1c.0: bridge window [mem 0xfba00000-0xfbafffff] [ 3.317996] pci 0000:00:1c.1: PCI bridge to [bus 06] [ 3.322964] pci 0000:00:1c.1: bridge window [io 0xc000-0xcfff] [ 3.329058] pci 0000:00:1c.1: bridge window [mem 0xfb900000-0xfb9fffff] [ 3.335851] pci 0000:00:1e.0: PCI bridge to [bus 07] [ 3.340819] pci 0000:00:1e.0: bridge window [mem 0xfb000000-0xfb8fffff] [ 3.347603] pci 0000:00:1e.0: bridge window [mem 0xf9000000-0xf9ffffff 64bit pref] [ 3.355345] pci_bus 0000:00: resource 4 [io 0x0000-0x03af window] [ 3.361528] pci_bus 0000:00: resource 5 [io 0x03e0-0x0cf7 window] [ 3.367707] pci_bus 0000:00: resource 6 [io 0x03b0-0x03df window] [ 3.373886] pci_bus 0000:00: resource 7 [io 0x0d00-0xffff window] [ 3.380067] pci_bus 0000:00: resource 8 [mem 0x000a0000-0x000dffff window] [ 3.386938] pci_bus 0000:00: resource 9 [mem 0xfed08000-0xfed08fff window] [ 3.393811] pci_bus 0000:00: resource 10 [mem 0xfed0e000-0xfed0ffff window] [ 3.400772] pci_bus 0000:00: resource 11 [mem 0x80000000-0xfbffffff window] [ 3.407732] pci_bus 0000:04: resource 0 [io 0xe000-0xefff] [ 3.413303] pci_bus 0000:04: resource 2 [mem 0xfa000000-0xfa4fffff 64bit pref] [ 3.420521] pci_bus 0000:05: resource 0 [io 0xd000-0xdfff] [ 3.426096] pci_bus 0000:05: resource 1 [mem 0xfba00000-0xfbafffff] [ 3.432359] pci_bus 0000:06: resource 0 [io 0xc000-0xcfff] [ 3.437933] pci_bus 0000:06: resource 1 [mem 0xfb900000-0xfb9fffff] [ 3.444198] pci_bus 0000:07: resource 1 [mem 0xfb000000-0xfb8fffff] [ 3.450465] pci_bus 0000:07: resource 2 [mem 0xf9000000-0xf9ffffff 64bit pref] [ 3.457685] pci_bus 0000:07: resource 4 [io 0x0000-0x03af window] [ 3.463864] pci_bus 0000:07: resource 5 [io 0x03e0-0x0cf7 window] [ 3.470042] pci_bus 0000:07: resource 6 [io 0x03b0-0x03df window] [ 3.476221] pci_bus 0000:07: resource 7 [io 0x0d00-0xffff window] [ 3.482400] pci_bus 0000:07: resource 8 [mem 0x000a0000-0x000dffff window] [ 3.489274] pci_bus 0000:07: resource 9 [mem 0xfed08000-0xfed08fff window] [ 3.496146] pci_bus 0000:07: resource 10 [mem 0xfed0e000-0xfed0ffff window] [ 3.503105] pci_bus 0000:07: resource 11 [mem 0x80000000-0xfbffffff window] [ 3.510159] pci 0000:00:05.0: disabled boot interrupts on device [8086:0e28] [ 3.541466] pci 0000:00:1a.0: quirk_usb_early_handoff+0x0/0x750 took 23672 usecs [ 3.573451] pci 0000:00:1d.0: quirk_usb_early_handoff+0x0/0x750 took 23995 usecs [ 3.580951] PCI: CLS 64 bytes, default 64 [ 3.584996] DMAR: No SATC found [ 3.585029] Trying to unpack rootfs image as initramfs... [ 3.588143] DMAR: dmar0: Using Queued invalidation [ 3.588222] pci 0000:00:00.0: Adding to iommu group 0 [ 3.603450] pci 0000:00:01.0: Adding to iommu group 1 [ 3.608535] pci 0000:00:01.1: Adding to iommu group 2 [ 3.613618] pci 0000:00:03.0: Adding to iommu group 3 [ 3.618703] pci 0000:00:04.0: Adding to iommu group 4 [ 3.623777] pci 0000:00:04.1: Adding to iommu group 5 [ 3.628860] pci 0000:00:04.2: Adding to iommu group 6 [ 3.633939] pci 0000:00:04.3: Adding to iommu group 7 [ 3.639014] pci 0000:00:04.4: Adding to iommu group 8 [ 3.644093] pci 0000:00:04.5: Adding to iommu group 9 [ 3.649176] pci 0000:00:04.6: Adding to iommu group 10 [ 3.654345] pci 0000:00:04.7: Adding to iommu group 11 [ 3.659513] pci 0000:00:05.0: Adding to iommu group 12 [ 3.664676] pci 0000:00:05.2: Adding to iommu group 13 [ 3.669843] pci 0000:00:05.4: Adding to iommu group 14 [ 3.675007] pci 0000:00:11.0: Adding to iommu group 15 [ 3.680197] pci 0000:00:16.0: Adding to iommu group 16 [ 3.685373] pci 0000:00:16.1: Adding to iommu group 16 [ 3.690545] pci 0000:00:1a.0: Adding to iommu group 17 [ 3.695713] pci 0000:00:1c.0: Adding to iommu group 18 [ 3.700881] pci 0000:00:1c.1: Adding to iommu group 19 [ 3.706051] pci 0000:00:1d.0: Adding to iommu group 20 [ 3.711219] pci 0000:00:1e.0: Adding to iommu group 21 [ 3.716436] pci 0000:00:1f.0: Adding to iommu group 22 [ 3.721600] pci 0000:00:1f.2: Adding to iommu group 22 [ 3.726763] pci 0000:00:1f.3: Adding to iommu group 22 [ 3.731928] pci 0000:00:1f.6: Adding to iommu group 22 [ 3.737103] pci 0000:04:00.0: Adding to iommu group 23 [ 3.742270] pci 0000:05:00.0: Adding to iommu group 24 [ 3.747433] pci 0000:06:00.0: Adding to iommu group 25 [ 3.752580] pci 0000:07:01.0: Adding to iommu group 21 [ 3.757765] pci 0000:ff:08.0: Adding to iommu group 26 [ 3.762944] pci 0000:ff:09.0: Adding to iommu group 27 [ 3.768155] pci 0000:ff:0a.0: Adding to iommu group 28 [ 3.773324] pci 0000:ff:0a.1: Adding to iommu group 28 [ 3.778499] pci 0000:ff:0a.2: Adding to iommu group 28 [ 3.783675] pci 0000:ff:0a.3: Adding to iommu group 28 [ 3.788867] pci 0000:ff:0b.0: Adding to iommu group 29 [ 3.794038] pci 0000:ff:0b.3: Adding to iommu group 29 [ 3.799234] pci 0000:ff:0c.0: Adding to iommu group 30 [ 3.804403] pci 0000:ff:0c.1: Adding to iommu group 30 [ 3.809600] pci 0000:ff:0d.0: Adding to iommu group 31 [ 3.814767] pci 0000:ff:0d.1: Adding to iommu group 31 [ 3.819963] pci 0000:ff:0e.0: Adding to iommu group 32 [ 3.825135] pci 0000:ff:0e.1: Adding to iommu group 32 [ 3.830306] pci 0000:ff:0f.0: Adding to iommu group 33 [ 3.835475] pci 0000:ff:0f.1: Adding to iommu group 34 [ 3.840640] pci 0000:ff:0f.2: Adding to iommu group 35 [ 3.845810] pci 0000:ff:0f.3: Adding to iommu group 36 [ 3.850980] pci 0000:ff:0f.4: Adding to iommu group 37 [ 3.856147] pci 0000:ff:0f.5: Adding to iommu group 38 [ 3.861315] pci 0000:ff:10.0: Adding to iommu group 39 [ 3.866488] pci 0000:ff:10.1: Adding to iommu group 40 [ 3.871652] pci 0000:ff:10.2: Adding to iommu group 41 [ 3.876817] pci 0000:ff:10.3: Adding to iommu group 42 [ 3.881982] pci 0000:ff:10.4: Adding to iommu group 43 [ 3.887149] pci 0000:ff:10.5: Adding to iommu group 44 [ 3.892313] pci 0000:ff:10.6: Adding to iommu group 45 [ 3.897477] pci 0000:ff:10.7: Adding to iommu group 46 [ 3.902687] pci 0000:ff:13.0: Adding to iommu group 47 [ 3.907875] pci 0000:ff:13.1: Adding to iommu group 47 [ 3.913050] pci 0000:ff:13.4: Adding to iommu group 47 [ 3.918224] pci 0000:ff:13.5: Adding to iommu group 47 [ 3.923425] pci 0000:ff:16.0: Adding to iommu group 48 [ 3.928596] pci 0000:ff:16.1: Adding to iommu group 48 [ 3.933774] pci 0000:ff:16.2: Adding to iommu group 48 [ 3.942787] DMAR: Intel(R) Virtualization Technology for Directed I/O [ 3.949239] PCI-DMA: Using software bounce buffering for IO (SWIOTLB) [ 3.955681] software IO TLB: mapped [mem 0x0000000079e2c000-0x000000007de2c000] (64MB) [ 3.964181] Initialise system trusted keyrings [ 3.968645] Key type blacklist registered [ 3.972745] workingset: timestamp_bits=36 max_order=21 bucket_order=0 [ 3.981052] zbud: loaded [ 3.983918] integrity: Platform Keyring initialized [ 3.988807] integrity: Machine keyring initialized [ 3.993601] Key type asymmetric registered [ 3.997706] Asymmetric key parser 'x509' registered [ 4.029503] Freeing initrd memory: 39592K [ 4.040729] alg: self-tests for CTR-KDF (hmac(sha256)) passed [ 4.046519] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 248) [ 4.053960] io scheduler mq-deadline registered [ 4.060930] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4 [ 4.067751] Monitor-Mwait will be used to enter C-1 state [ 4.067765] Monitor-Mwait will be used to enter C-2 state [ 4.067772] ACPI: \_SB_.SCK0.C000: Found 2 idle states [ 4.077789] ERST: Error Record Serialization Table (ERST) support is initialized. [ 4.085285] pstore: Registered erst as persistent store backend [ 4.091365] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled [ 4.097800] 00:07: ttyS0 at I/O 0x3f8 (irq = 4, base_baud = 115200) is a 16550A [ 4.105925] 00:08: ttyS1 at I/O 0x2f8 (irq = 3, base_baud = 115200) is a 16550A [ 4.114165] Linux agpgart interface v0.103 [ 4.118393] AMD-Vi: AMD IOMMUv2 functionality not available on this system - This is not a bug. [ 4.127537] i8042: PNP: PS/2 Controller [PNP0f03:PS2M] at 0x60,0x64 irq 12 [ 4.134413] i8042: PNP: PS/2 controller doesn't have KBD irq; using default 1 [ 4.144481] serio: i8042 KBD port at 0x60,0x64 irq 1 [ 4.149455] serio: i8042 AUX port at 0x60,0x64 irq 12 [ 4.154702] mousedev: PS/2 mouse device common for all mice [ 4.160312] rtc_cmos 00:02: RTC can wake from S4 [ 4.165236] rtc_cmos 00:02: registered as rtc0 [ 4.169720] rtc_cmos 00:02: setting system clock to 2024-06-24T03:21:42 UTC (1719199302) [ 4.177852] rtc_cmos 00:02: alarms up to one month, y3k, 114 bytes nvram, hpet irqs [ 4.185674] intel_pstate: Intel P-state driver initializing [ 4.191526] ledtrig-cpu: registered to indicate activity on CPUs [ 4.215553] NET: Registered PF_INET6 protocol family [ 4.228396] Segment Routing with IPv6 [ 4.232107] In-situ OAM (IOAM) with IPv6 [ 4.236068] mip6: Mobile IPv6 [ 4.239046] NET: Registered PF_PACKET protocol family [ 4.244206] mpls_gso: MPLS GSO support [ 4.248443] microcode: sig=0x306e4, pf=0x8, revision=0x42e [ 4.253998] microcode: Microcode Update Driver: v2.2. [ 4.254005] IPI shorthand broadcast: enabled [ 4.263364] sched_clock: Marking stable (3273983197, 989347203)->(4637912180, -374581780) [ 4.271794] registered taskstats version 1 [ 4.275907] Loading compiled-in X.509 certificates [ 4.324239] Loaded X.509 cert 'Debian Secure Boot CA: 6ccece7e4c6c0d1f6149f3dd27dfcc5cbb419ea1' [ 4.332966] Loaded X.509 cert 'Debian Secure Boot Signer 2022 - linux: 14011249c2675ea8e5148542202005810584b25f' [ 4.343593] zswap: loaded using pool lzo/zbud [ 4.348168] Key type .fscrypt registered [ 4.352099] Key type fscrypt-provisioning registered [ 4.357478] pstore: Using crash dump compression: deflate [ 4.370625] Key type encrypted registered [ 4.374666] AppArmor: AppArmor sha1 policy hashing enabled [ 4.380167] ima: No TPM chip found, activating TPM-bypass! [ 4.385657] ima: Allocated hash algorithm: sha256 [ 4.390373] ima: No architecture policies found [ 4.394928] evm: Initialising EVM extended attributes: [ 4.400064] evm: security.selinux [ 4.403383] evm: security.SMACK64 (disabled) [ 4.407656] evm: security.SMACK64EXEC (disabled) [ 4.412274] evm: security.SMACK64TRANSMUTE (disabled) [ 4.417328] evm: security.SMACK64MMAP (disabled) [ 4.421946] evm: security.apparmor [ 4.425352] evm: security.ima [ 4.428324] evm: security.capability [ 4.431904] evm: HMAC attrs: 0x1 [ 4.611068] clk: Disabling unused clocks [ 4.616692] Freeing unused decrypted memory: 2036K [ 4.622153] Freeing unused kernel image (initmem) memory: 2796K [ 4.628148] Write protecting the kernel read-only data: 26624k [ 4.634690] Freeing unused kernel image (text/rodata gap) memory: 2040K [ 4.641634] Freeing unused kernel image (rodata/data gap) memory: 1180K [ 4.734284] x86/mm: Checked W+X mappings: passed, no W+X pages found. [ 4.740722] x86/mm: Checking user space page tables [ 4.820485] x86/mm: Checked W+X mappings: passed, no W+X pages found. [ 4.826931] Run /init as init process [ 4.830592] with arguments: [ 4.830595] /init [ 4.830596] with environment: [ 4.830597] HOME=/ [ 4.830598] TERM=linux [ 4.830599] BOOT_IMAGE=/vmlinuz-6.1.0-21-amd64 [ 4.993375] tsc: Refined TSC clocksource calibration: 1799.999 MHz [ 4.999570] clocksource: tsc: mask: 0xffffffffffffffff max_cycles: 0x19f228ab7a2, max_idle_ns: 440795289252 ns [ 5.010804] clocksource: Switched to clocksource tsc [ 5.049762] e1000e: Intel(R) PRO/1000 Network Driver [ 5.054741] e1000e: Copyright(c) 1999 - 2015 Intel Corporation. [ 5.061027] ACPI: bus type USB registered [ 5.065085] usbcore: registered new interface driver usbfs [ 5.065441] i801_smbus 0000:00:1f.3: SMBus using PCI interrupt [ 5.070926] usbcore: registered new interface driver hub [ 5.077571] i2c i2c-0: 1/6 memory slots populated (from DMI) [ 5.082995] usbcore: registered new device driver usb [ 5.083148] e1000e 0000:05:00.0: Interrupt Throttling Rate (ints/sec) set to dynamic conservative mode [ 5.087393] i2c i2c-0: Systems with more than 4 memory slots not supported yet, not instantiating SPD [ 5.111941] SCSI subsystem initialized [ 5.123956] ehci-pci 0000:00:1a.0: EHCI Host Controller [ 5.129455] ehci-pci 0000:00:1a.0: new USB bus registered, assigned bus number 1 [ 5.132949] e1000e 0000:05:00.0 0000:05:00.0 (uninitialized): registered PHC clock [ 5.141379] ehci-pci 0000:00:1a.0: debug port 2 [ 5.154594] ehci-pci 0000:00:1a.0: irq 16, io mem 0xfbb23000 [ 5.161710] libata version 3.00 loaded. [ 5.168769] ahci 0000:00:1f.2: version 3.0 [ 5.173373] ehci-pci 0000:00:1a.0: USB 2.0 started, EHCI 1.00 [ 5.179096] ahci 0000:00:1f.2: AHCI 0001.0300 32 slots 6 ports 6 Gbps 0x3f impl SATA mode [ 5.179220] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 6.01 [ 5.187302] ahci 0000:00:1f.2: flags: 64bit ncq sntf pm led clo pio slum part ems apst [ 5.201851] e1000e 0000:05:00.0 eth0: (PCI Express:2.5GT/s:Width x1) 0c:c4:7a:13:33:8c [ 5.203571] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 5.211482] e1000e 0000:05:00.0 eth0: Intel(R) PRO/1000 Network Connection [ 5.218696] usb usb1: Product: EHCI Host Controller [ 5.225655] e1000e 0000:05:00.0 eth0: MAC: 3, PHY: 8, PBA No: FFFFFF-0FF [ 5.230455] usb usb1: Manufacturer: Linux 6.1.0-21-amd64 ehci_hcd [ 5.237489] e1000e 0000:06:00.0: Interrupt Throttling Rate (ints/sec) set to dynamic conservative mode [ 5.243248] usb usb1: SerialNumber: 0000:00:1a.0 [ 5.243450] hub 1-0:1.0: USB hub found [ 5.257949] scsi host0: ahci [ 5.260937] hub 1-0:1.0: 2 ports detected [ 5.264019] scsi host1: ahci [ 5.268181] ehci-pci 0000:00:1d.0: EHCI Host Controller [ 5.270872] scsi host2: ahci [ 5.275944] ehci-pci 0000:00:1d.0: new USB bus registered, assigned bus number 2 [ 5.278974] scsi host3: ahci [ 5.286233] ehci-pci 0000:00:1d.0: debug port 2 [ 5.289246] scsi host4: ahci [ 5.296689] scsi host5: ahci [ 5.297001] isci: Intel(R) C600 SAS Controller Driver - version 1.2.0 [ 5.297629] ehci-pci 0000:00:1d.0: irq 23, io mem 0xfbb22000 [ 5.299646] ata1: SATA max UDMA/133 abar m2048@0xfbb21000 port 0xfbb21100 irq 32 [ 5.303637] e1000e 0000:06:00.0 0000:06:00.0 (uninitialized): registered PHC clock [ 5.306037] isci 0000:04:00.0: driver configured for rev: 6 silicon [ 5.311680] ata2: SATA max UDMA/133 abar m2048@0xfbb21000 port 0xfbb21180 irq 32 [ 5.313372] ehci-pci 0000:00:1d.0: USB 2.0 started, EHCI 1.00 [ 5.313444] usb usb2: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 6.01 [ 5.313448] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 5.313450] usb usb2: Product: EHCI Host Controller [ 5.313452] usb usb2: Manufacturer: Linux 6.1.0-21-amd64 ehci_hcd [ 5.313454] usb usb2: SerialNumber: 0000:00:1d.0 [ 5.313623] hub 2-0:1.0: USB hub found [ 5.313635] hub 2-0:1.0: 2 ports detected [ 5.337322] isci 0000:04:00.0: OEM parameter table found in OROM [ 5.341022] ata3: SATA max UDMA/133 abar m2048@0xfbb21000 port 0xfbb21200 irq 32 [ 5.346772] isci 0000:04:00.0: OEM SAS parameters (version: 1.0) loaded (platform) [ 5.354719] e1000e 0000:06:00.0 eth1: (PCI Express:2.5GT/s:Width x1) 0c:c4:7a:13:33:8d [ 5.354724] e1000e 0000:06:00.0 eth1: Intel(R) PRO/1000 Network Connection [ 5.354805] e1000e 0000:06:00.0 eth1: MAC: 3, PHY: 8, PBA No: FFFFFF-0FF [ 5.355031] ata4: SATA max UDMA/133 abar m2048@0xfbb21000 port 0xfbb21280 irq 32 [ 5.362438] isci 0000:04:00.0: SCU controller 0: phy 3-0 cables: {short, short, short, short} [ 5.364152] e1000e 0000:06:00.0 enx0cc47a13338d: renamed from eth1 [ 5.367127] ata5: SATA max UDMA/133 abar m2048@0xfbb21000 port 0xfbb21300 irq 32 [ 5.367129] ata6: SATA max UDMA/133 abar m2048@0xfbb21000 port 0xfbb21380 irq 32 [ 5.467718] scsi host6: isci [ 5.473777] e1000e 0000:05:00.0 enx0cc47a13338c: renamed from eth0 [ 5.525405] usb 1-1: new high-speed USB device number 2 using ehci-pci [ 5.573434] usb 2-1: new high-speed USB device number 2 using ehci-pci [ 5.680311] ata2: SATA link down (SStatus 0 SControl 300) [ 5.685759] ata3: SATA link down (SStatus 0 SControl 300) [ 5.691194] ata1: SATA link up 6.0 Gbps (SStatus 133 SControl 300) [ 5.697414] ata4: SATA link down (SStatus 0 SControl 300) [ 5.697682] usb 1-1: New USB device found, idVendor=8087, idProduct=0024, bcdDevice= 0.00 [ 5.702860] ata6: SATA link down (SStatus 0 SControl 300) [ 5.711005] usb 1-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0 [ 5.711398] hub 1-1:1.0: USB hub found [ 5.716491] ata5: SATA link down (SStatus 0 SControl 300) [ 5.723685] hub 1-1:1.0: 6 ports detected [ 5.727472] ata1.00: ATA-8: WDC WD1003FBYZ-010FB0, 01.01V03, max UDMA/133 [ 5.743915] ata1.00: 1953525168 sectors, multi 16: LBA48 NCQ (depth 32), AA [ 5.752966] ata1.00: configured for UDMA/133 [ 5.757336] scsi: waiting for bus probes to complete ... [ 5.757560] usb 2-1: New USB device found, idVendor=8087, idProduct=0024, bcdDevice= 0.00 [ 5.770840] usb 2-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0 [ 5.778415] hub 2-1:1.0: USB hub found [ 5.782334] hub 2-1:1.0: 8 ports detected [ 5.893577] scsi 0:0:0:0: Direct-Access ATA WDC WD1003FBYZ-0 1V03 PQ: 0 ANSI: 5 [ 5.924603] sd 0:0:0:0: [sda] 1953525168 512-byte logical blocks: (1.00 TB/932 GiB) [ 5.932302] sd 0:0:0:0: [sda] Write Protect is off [ 5.937101] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00 [ 5.937122] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 5.946192] sd 0:0:0:0: [sda] Preferred minimum I/O size 512 bytes [ 5.977966] sda: sda1 sda2 < sda5 > [ 5.981860] sd 0:0:0:0: [sda] Attached SCSI disk [ 6.021413] usb 1-1.1: new full-speed USB device number 3 using ehci-pci [ 6.139431] usb 1-1.1: New USB device found, idVendor=0557, idProduct=2221, bcdDevice= 0.01 [ 6.147816] usb 1-1.1: New USB device strings: Mfr=1, Product=2, SerialNumber=0 [ 6.155149] usb 1-1.1: Product: Hermon USB hidmouse Device [ 6.160646] usb 1-1.1: Manufacturer: Winbond Electronics Corp [ 6.181580] hid: raw HID events driver (C) Jiri Kosina [ 6.194573] usbcore: registered new interface driver usbhid [ 6.200164] usbhid: USB HID core driver [ 6.207556] input: Winbond Electronics Corp Hermon USB hidmouse Device as /devices/pci0000:00/0000:00:1a.0/usb1/1-1/1-1.1/1-1.1:1.0/0003:0557:2221.0001/input/input3 [ 6.222523] hid-generic 0003:0557:2221.0001: input,hidraw0: USB HID v1.00 Mouse [Winbond Electronics Corp Hermon USB hidmouse Device] on usb-0000:00:1a.0-1.1/input0 [ 6.237625] input: Winbond Electronics Corp Hermon USB hidmouse Device as /devices/pci0000:00/0000:00:1a.0/usb1/1-1/1-1.1/1-1.1:1.1/0003:0557:2221.0002/input/input4 [ 6.309659] hid-generic 0003:0557:2221.0002: input,hidraw1: USB HID v1.00 Keyboard [Winbond Electronics Corp Hermon USB hidmouse Device] on usb-0000:00:1a.0-1.1/input1 [ 6.344150] device-mapper: core: CONFIG_IMA_DISABLE_HTABLE is disabled. Duplicate IMA measurements will not be recorded in the IMA log. [ 6.356356] device-mapper: uevent: version 1.0.3 [ 6.361058] device-mapper: ioctl: 4.47.0-ioctl (2022-07-28) initialised: dm-devel@redhat.com [ 7.053559] PM: Image not found (code -22) [ 7.480444] EXT4-fs (dm-0): mounting ext3 file system using the ext4 subsystem [ 7.492108] EXT4-fs (dm-0): mounted filesystem with ordered data mode. Quota mode: none. [ 7.669535] Not activating Mandatory Access Control as /sbin/tomoyo-init does not exist. [ 9.329989] input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input5 [ 9.353654] ACPI: button: Power Button [PWRB] [ 9.358123] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input6 [ 9.366542] ACPI: button: Power Button [PWRF] [ 9.483291] dca service started, version 1.12.1 [ 9.604510] IPMI message handler: version 39.2 [ 9.625164] input: PC Speaker as /devices/platform/pcspkr/input/input7 [ 9.663093] ioatdma: Intel(R) QuickData Technology Driver 5.00 [ 9.702164] sd 0:0:0:0: Attached scsi generic sg0 type 0 [ 9.771976] ipmi device interface [ 9.862742] RAPL PMU: API unit is 2^-32 Joules, 3 fixed counters, 163840 ms ovfl timer [ 9.870677] RAPL PMU: hw unit of domain pp0-core 2^-16 Joules [ 9.876428] RAPL PMU: hw unit of domain package 2^-16 Joules [ 9.882086] RAPL PMU: hw unit of domain dram 2^-16 Joules [ 9.922353] ipmi_si: IPMI System Interface driver [ 9.927132] ipmi_si dmi-ipmi-si.0: ipmi_platform: probing via SMBIOS [ 9.933493] ipmi_platform: ipmi_si: SMBIOS: io 0xca2 regsize 1 spacing 1 irq 0 [ 9.940716] ipmi_si: Adding SMBIOS-specified kcs state machine [ 9.946611] ipmi_si IPI0001:00: ipmi_platform: probing via ACPI [ 9.952659] ipmi_si IPI0001:00: ipmi_platform: [io 0x0ca2] regsize 1 spacing 1 irq 0 [ 10.002712] ipmi_si dmi-ipmi-si.0: Removing SMBIOS-specified kcs state machine in favor of ACPI [ 10.011416] ipmi_si: Adding ACPI-specified kcs state machine [ 10.017168] ipmi_si: Trying ACPI-specified kcs state machine at i/o address 0xca2, slave address 0x0, irq 0 [ 10.017558] cryptd: max_cpu_qlen set to 1000 [ 10.031570] iTCO_vendor_support: vendor-support=0 [ 10.067235] ACPI: bus type drm_connector registered [ 10.072769] mei_me 0000:00:16.0: Device doesn't have valid ME Interface [ 10.111262] iTCO_wdt iTCO_wdt.1.auto: unable to reset NO_REBOOT flag, device disabled by hardware/BIOS [ 10.138465] AVX version of gcm_enc/dec engaged. [ 10.143061] AES CTR mode by8 optimization enabled [ 10.328741] mgag200 0000:07:01.0: vgaarb: deactivate vga console [ 10.333381] ipmi_si IPI0001:00: The BMC does not support clearing the recv irq bit, compensating, but the BMC needs to be fixed. [ 10.351477] Console: switching to colour dummy device 80x25 [ 10.363205] [drm] Initialized mgag200 1.0.0 20110418 for 0000:07:01.0 on minor 0 [ 10.372655] fbcon: mgag200drmfb (fb0) is primary device [ 10.385195] ipmi_si IPI0001:00: IPMI message handler: Found new BMC (man_id: 0x002a7c, prod_id: 0x0703, dev_id: 0x20) [ 10.448471] ipmi_si IPI0001:00: IPMI kcs interface initialized [ 10.529050] ipmi_ssif: IPMI SSIF Interface driver [ 10.746281] Console: switching to colour frame buffer device 128x48 [ 10.845998] mgag200 0000:07:01.0: [drm] fb0: mgag200drmfb frame buffer device [ 11.083146] EDAC sbridge: Seeking for: PCI ID 8086:0ea0 [ 11.083175] EDAC sbridge: Seeking for: PCI ID 8086:0ea0 [ 11.083182] EDAC sbridge: Seeking for: PCI ID 8086:0e60 [ 11.083190] EDAC sbridge: Seeking for: PCI ID 8086:0ea8 [ 11.083199] EDAC sbridge: Seeking for: PCI ID 8086:0ea8 [ 11.083202] EDAC sbridge: Seeking for: PCI ID 8086:0e71 [ 11.083211] EDAC sbridge: Seeking for: PCI ID 8086:0e71 [ 11.083214] EDAC sbridge: Seeking for: PCI ID 8086:0eaa [ 11.083223] EDAC sbridge: Seeking for: PCI ID 8086:0eaa [ 11.083226] EDAC sbridge: Seeking for: PCI ID 8086:0eab [ 11.083235] EDAC sbridge: Seeking for: PCI ID 8086:0eab [ 11.083238] EDAC sbridge: Seeking for: PCI ID 8086:0eac [ 11.083247] EDAC sbridge: Seeking for: PCI ID 8086:0eac [ 11.083250] EDAC sbridge: Seeking for: PCI ID 8086:0ead [ 11.083259] EDAC sbridge: Seeking for: PCI ID 8086:0ead [ 11.083262] EDAC sbridge: Seeking for: PCI ID 8086:0e68 [ 11.083270] EDAC sbridge: Seeking for: PCI ID 8086:0e79 [ 11.083277] EDAC sbridge: Seeking for: PCI ID 8086:0e6a [ 11.083285] EDAC sbridge: Seeking for: PCI ID 8086:0e6b [ 11.083293] EDAC sbridge: Seeking for: PCI ID 8086:0e6c [ 11.083300] EDAC sbridge: Seeking for: PCI ID 8086:0e6d [ 11.083308] EDAC sbridge: Seeking for: PCI ID 8086:0eb8 [ 11.083315] EDAC sbridge: Seeking for: PCI ID 8086:0ebc [ 11.083323] EDAC sbridge: Seeking for: PCI ID 8086:0ec8 [ 11.083332] EDAC sbridge: Seeking for: PCI ID 8086:0ec8 [ 11.083335] EDAC sbridge: Seeking for: PCI ID 8086:0ec9 [ 11.083344] EDAC sbridge: Seeking for: PCI ID 8086:0ec9 [ 11.083346] EDAC sbridge: Seeking for: PCI ID 8086:0eca [ 11.083356] EDAC sbridge: Seeking for: PCI ID 8086:0eca [ 11.083504] EDAC MC0: Giving out device to module sb_edac controller Ivy Bridge SrcID#0_Ha#0: DEV 0000:ff:0e.0 (INTERRUPT) [ 11.094550] EDAC sbridge: Ver: 1.1.2 [ 11.186831] intel_rapl_common: Found RAPL domain package [ 11.192157] intel_rapl_common: Found RAPL domain core [ 11.197215] intel_rapl_common: Found RAPL domain dram [ 12.374571] EXT4-fs (dm-0): re-mounted. Quota mode: none. [ 13.718570] EXT4-fs (sda1): mounting ext3 file system using the ext4 subsystem [ 13.731874] EXT4-fs (sda1): mounted filesystem with ordered data mode. Quota mode: none. [ 13.788915] Adding 1949692k swap on /dev/mapper/fiano0--vg-swap_1. Priority:-2 extents:1 across:1949692k FS [ 14.395334] audit: type=1400 audit(1719199313.192:2): apparmor="STATUS" operation="profile_load" profile="unconfined" name="nvidia_modprobe" pid=1067 comm="apparmor_parser" [ 14.411230] audit: type=1400 audit(1719199313.192:3): apparmor="STATUS" operation="profile_load" profile="unconfined" name="lsb_release" pid=1066 comm="apparmor_parser" [ 14.426258] audit: type=1400 audit(1719199313.192:4): apparmor="STATUS" operation="profile_load" profile="unconfined" name="nvidia_modprobe//kmod" pid=1067 comm="apparmor_parser" [ 14.450564] audit: type=1400 audit(1719199313.248:5): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/bin/man" pid=1069 comm="apparmor_parser" [ 14.465686] audit: type=1400 audit(1719199313.256:6): apparmor="STATUS" operation="profile_load" profile="unconfined" name="man_filter" pid=1069 comm="apparmor_parser" [ 14.480617] audit: type=1400 audit(1719199313.256:7): apparmor="STATUS" operation="profile_load" profile="unconfined" name="man_groff" pid=1069 comm="apparmor_parser" [ 14.607372] audit: type=1400 audit(1719199313.404:8): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/sbin/ntpd" pid=1089 comm="apparmor_parser" [ 14.653372] audit: type=1400 audit(1719199313.448:9): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=1068 comm="apparmor_parser" [ 14.671355] audit: type=1400 audit(1719199313.452:10): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/NetworkManager/nm-dhcp-helper" pid=1068 comm="apparmor_parser" [ 14.688806] audit: type=1400 audit(1719199313.456:11): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/connman/scripts/dhclient-script" pid=1068 comm="apparmor_parser" [ 17.834449] e1000e 0000:05:00.0 enx0cc47a13338c: NIC Link is Up 1000 Mbps Full Duplex, Flow Control: None [ 17.844920] IPv6: ADDRCONF(NETDEV_CHANGE): enx0cc47a13338c: link becomes ready