[ 0.000000] Linux version 6.1.95+ (osstest@himrod0) (gcc (Debian 12.2.0-14) 12.2.0, GNU ld (GNU Binutils for Debian) 2.40) #1 SMP PREEMPT_DYNAMIC Mon Jun 24 03:03:40 UTC 2024 [ 0.000000] Command line: placeholder root=/dev/mapper/debina0--vg-root ro console=hvc0 [ 0.000000] Released 0 page(s) [ 0.000000] BIOS-provided physical RAM map: [ 0.000000] Xen: [mem 0x0000000000000000-0x0000000000099fff] usable [ 0.000000] Xen: [mem 0x000000000009ac00-0x00000000000fffff] reserved [ 0.000000] Xen: [mem 0x0000000000100000-0x0000000020065fff] usable [ 0.000000] Xen: [mem 0x00000000796ef000-0x00000000798bdfff] reserved [ 0.000000] Xen: [mem 0x00000000799b7000-0x0000000079e5afff] ACPI NVS [ 0.000000] Xen: [mem 0x0000000079e5b000-0x000000007bdb0fff] reserved [ 0.000000] Xen: [mem 0x000000007bdb2000-0x000000007be37fff] reserved [ 0.000000] Xen: [mem 0x0000000080000000-0x000000008fffffff] reserved [ 0.000000] Xen: [mem 0x00000000fbffc000-0x00000000fbffcfff] reserved [ 0.000000] Xen: [mem 0x00000000fec00000-0x00000000fec00fff] reserved [ 0.000000] Xen: [mem 0x00000000fed1c000-0x00000000fed1ffff] reserved [ 0.000000] Xen: [mem 0x00000000fee00000-0x00000000feefffff] reserved [ 0.000000] Xen: [mem 0x00000000ff000000-0x00000000ffffffff] reserved [ 0.000000] NX (Execute Disable) protection: active [ 0.000000] SMBIOS 2.8 present. [ 0.000000] DMI: Supermicro SYS-5018D-FN8T/X10SDV-TP8F, BIOS 1.0b 11/21/2016 [ 0.000000] Hypervisor detected: Xen PV [ 0.000459] tsc: Detected 2199.998 MHz processor [ 0.000900] e820: update [mem 0x00000000-0x00000fff] usable ==> reserved [ 0.000903] e820: remove [mem 0x000a0000-0x000fffff] usable [ 0.000910] last_pfn = 0x20066 max_arch_pfn = 0x400000000 [ 0.000911] Disabled [ 0.000912] x86/PAT: MTRRs disabled, skipping PAT initialization too. [ 0.000916] x86/PAT: Configuration [0-7]: WB WT UC- UC WC WP UC UC [ 0.000955] Kernel/User page tables isolation: disabled on XEN PV. [ 0.027672] RAMDISK: [mem 0x04000000-0x0536afff] [ 0.027680] ACPI: Early table checksum verification disabled [ 0.028279] ACPI: RSDP 0x00000000000F0580 000024 (v02 SUPERM) [ 0.028291] ACPI: XSDT 0x00000000799FF098 0000B4 (v01 SUPERM SMCI--MB 01072009 AMI 00010013) [ 0.028327] ACPI: FACP 0x0000000079A17AC0 00010C (v05 SUPERM SMCI--MB 01072009 AMI 00010013) [ 0.028375] ACPI: DSDT 0x00000000799FF1E8 0188D5 (v02 SUPERM SMCI--MB 01072009 INTL 20091013) [ 0.028392] ACPI: FACS 0x0000000079E59F80 000040 [ 0.028408] ACPI: APIC 0x0000000079A17BD0 0000BC (v03 SUPERM SMCI--MB 01072009 AMI 00010013) [ 0.028424] ACPI: FPDT 0x0000000079A17C90 000044 (v01 SUPERM SMCI--MB 01072009 AMI 00010013) [ 0.028440] ACPI: FIDT 0x0000000079A17CD8 00009C (v01 SUPERM SMCI--MB 01072009 AMI 00010013) [ 0.028456] ACPI: MCFG 0x0000000079A17D78 00003C (v01 SUPERM SMCI--MB 01072009 MSFT 00000097) [ 0.028472] ACPI: UEFI 0x0000000079A17DB8 000042 (v01 00000000 00000000) [ 0.028488] ACPI: DBG2 0x0000000079A17E00 000072 (v00 SUPERM SMCI--MB 00000000 INTL 20091013) [ 0.028504] ACPI: HPET 0x0000000079A17E78 000038 (v01 SUPERM SMCI--MB 00000001 INTL 20091013) [ 0.028520] ACPI: WDDT 0x0000000079A17EB0 000040 (v01 SUPERM SMCI--MB 00000000 INTL 20091013) [ 0.028536] ACPI: SSDT 0x0000000079A17EF0 00ED8B (v01 AMI PmMgt 00000001 INTL 20120913) [ 0.028552] ACPI: SSDT 0x0000000079A26C80 002285 (v02 SUPERM SpsNm 00000002 INTL 20120913) [ 0.028568] ACPI: SSDT 0x0000000079A28F08 000064 (v02 SUPERM SpsNvs 00000002 INTL 20120913) [ 0.028584] ACPI: PRAD 0x0000000079A28F70 000102 (v02 SUPERM SMCI--MB 00000002 INTL 20120913) [ 0.028600] ACPI: RMAD 0x0000000079A29078 0000CC (v01 SUPERM SMCI--MB 00000001 INTL 20091013) [ 0.028616] ACPI: HEST 0x0000000079A29148 0000A8 (v01 SUPERM SMCI--MB 00000001 INTL 00000001) [ 0.028632] ACPI: BERT 0x0000000079A291F0 000030 (v01 SUPERM SMCI--MB 00000001 INTL 00000001) [ 0.028648] ACPI: ERST 0x0000000079A29220 000230 (v01 SUPERM SMCI--MB 00000001 INTL 00000001) [ 0.028664] ACPI: EINJ 0x0000000079A29450 000130 (v01 SUPERM SMCI--MB 00000001 INTL 00000001) [ 0.028677] ACPI: Reserving FACP table memory at [mem 0x79a17ac0-0x79a17bcb] [ 0.028679] ACPI: Reserving DSDT table memory at [mem 0x799ff1e8-0x79a17abc] [ 0.028680] ACPI: Reserving FACS table memory at [mem 0x79e59f80-0x79e59fbf] [ 0.028681] ACPI: Reserving APIC table memory at [mem 0x79a17bd0-0x79a17c8b] [ 0.028682] ACPI: Reserving FPDT table memory at [mem 0x79a17c90-0x79a17cd3] [ 0.028683] ACPI: Reserving FIDT table memory at [mem 0x79a17cd8-0x79a17d73] [ 0.028684] ACPI: Reserving MCFG table memory at [mem 0x79a17d78-0x79a17db3] [ 0.028685] ACPI: Reserving UEFI table memory at [mem 0x79a17db8-0x79a17df9] [ 0.028686] ACPI: Reserving DBG2 table memory at [mem 0x79a17e00-0x79a17e71] [ 0.028686] ACPI: Reserving HPET table memory at [mem 0x79a17e78-0x79a17eaf] [ 0.028687] ACPI: Reserving WDDT table memory at [mem 0x79a17eb0-0x79a17eef] [ 0.028688] ACPI: Reserving SSDT table memory at [mem 0x79a17ef0-0x79a26c7a] [ 0.028689] ACPI: Reserving SSDT table memory at [mem 0x79a26c80-0x79a28f04] [ 0.028690] ACPI: Reserving SSDT table memory at [mem 0x79a28f08-0x79a28f6b] [ 0.028691] ACPI: Reserving PRAD table memory at [mem 0x79a28f70-0x79a29071] [ 0.028692] ACPI: Reserving RMAD table memory at [mem 0x79a29078-0x79a29143] [ 0.028693] ACPI: Reserving HEST table memory at [mem 0x79a29148-0x79a291ef] [ 0.028694] ACPI: Reserving BERT table memory at [mem 0x79a291f0-0x79a2921f] [ 0.028695] ACPI: Reserving ERST table memory at [mem 0x79a29220-0x79a2944f] [ 0.028696] ACPI: Reserving EINJ table memory at [mem 0x79a29450-0x79a2957f] [ 0.028741] Setting APIC routing to Xen PV. [ 0.032688] Zone ranges: [ 0.032689] DMA [mem 0x0000000000001000-0x0000000000ffffff] [ 0.032692] DMA32 [mem 0x0000000001000000-0x0000000020065fff] [ 0.032694] Normal empty [ 0.032695] Movable zone start for each node [ 0.032696] Early memory node ranges [ 0.032696] node 0: [mem 0x0000000000001000-0x0000000000099fff] [ 0.032698] node 0: [mem 0x0000000000100000-0x0000000020065fff] [ 0.032700] Initmem setup node 0 [mem 0x0000000000001000-0x0000000020065fff] [ 0.032705] On node 0, zone DMA: 1 pages in unavailable ranges [ 0.032742] On node 0, zone DMA: 102 pages in unavailable ranges [ 0.034290] On node 0, zone DMA32: 32666 pages in unavailable ranges [ 0.034295] p2m virtual area at (____ptrval____), size is 40000000 [ 0.221788] Remapped 102 page(s) [ 0.223161] ACPI: PM-Timer IO Port: 0x408 [ 0.223214] ACPI: LAPIC_NMI (acpi_id[0x00] high level lint[0x1]) [ 0.223217] ACPI: LAPIC_NMI (acpi_id[0x02] high level lint[0x1]) [ 0.223219] ACPI: LAPIC_NMI (acpi_id[0x04] high level lint[0x1]) [ 0.223220] ACPI: LAPIC_NMI (acpi_id[0x06] high level lint[0x1]) [ 0.223222] ACPI: LAPIC_NMI (acpi_id[0x01] high level lint[0x1]) [ 0.223223] ACPI: LAPIC_NMI (acpi_id[0x03] high level lint[0x1]) [ 0.223225] ACPI: LAPIC_NMI (acpi_id[0x05] high level lint[0x1]) [ 0.223226] ACPI: LAPIC_NMI (acpi_id[0x07] high level lint[0x1]) [ 0.223254] IOAPIC[0]: apic_id 8, version 32, address 0xfec00000, GSI 0-23 [ 0.223268] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl) [ 0.223271] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level) [ 0.223296] ACPI: Using ACPI (MADT) for SMP configuration information [ 0.223301] ACPI: HPET id: 0x8086a701 base: 0xfed00000 [ 0.223371] smpboot: Allowing 8 CPUs, 0 hotplug CPUs [ 0.223385] PM: hibernation: Registered nosave memory: [mem 0x00000000-0x00000fff] [ 0.223388] PM: hibernation: Registered nosave memory: [mem 0x0009a000-0x0009afff] [ 0.223389] PM: hibernation: Registered nosave memory: [mem 0x0009b000-0x000fffff] [ 0.223391] [mem 0x90000000-0xfbffbfff] available for PCI devices [ 0.223396] Booting kernel on Xen [ 0.223397] Xen version: 4.19-unstable (preserve-AD) [ 0.223400] clocksource: refined-jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 1910969940391419 ns [ 0.229633] setup_percpu: NR_CPUS:64 nr_cpumask_bits:8 nr_cpu_ids:8 nr_node_ids:1 [ 0.229916] percpu: Embedded 54 pages/cpu s180520 r8192 d32472 u262144 [ 0.229922] pcpu-alloc: s180520 r8192 d32472 u262144 alloc=1*2097152 [ 0.229925] pcpu-alloc: [0] 0 1 2 3 4 5 6 7 [ 0.230003] xen: PV spinlocks enabled [ 0.230006] PV qspinlock hash table entries: 256 (order: 0, 4096 bytes, linear) [ 0.230012] Built 1 zonelists, mobility grouping on. Total pages: 129006 [ 0.230014] Kernel command line: placeholder root=/dev/mapper/debina0--vg-root ro console=hvc0 [ 0.230052] Unknown kernel command line parameters "placeholder", will be passed to user space. [ 0.230062] random: crng init done [ 0.230111] Dentry cache hash table entries: 65536 (order: 7, 524288 bytes, linear) [ 0.230136] Inode-cache hash table entries: 32768 (order: 6, 262144 bytes, linear) [ 0.231454] mem auto-init: stack:all(zero), heap alloc:off, heap free:off [ 0.231457] software IO TLB: area num 8. [ 0.290983] Memory: 390032K/524284K available (14349K kernel code, 2682K rwdata, 4576K rodata, 1576K init, 1296K bss, 134000K reserved, 0K cma-reserved) [ 0.291151] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=8, Nodes=1 [ 0.293640] Dynamic Preempt: voluntary [ 0.293739] rcu: Preemptible hierarchical RCU implementation. [ 0.293740] rcu: RCU event tracing is enabled. [ 0.293741] rcu: RCU restricting CPUs from NR_CPUS=64 to nr_cpu_ids=8. [ 0.293743] Trampoline variant of Tasks RCU enabled. [ 0.293744] rcu: RCU calculated value of scheduler-enlistment delay is 100 jiffies. [ 0.293745] rcu: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=8 [ 0.304234] NR_IRQS: 4352, nr_irqs: 488, preallocated irqs: 16 [ 0.304359] xen:events: Using FIFO-based ABI [ 0.304383] xen: --> pirq=1 -> irq=1 (gsi=1) [ 0.304391] xen: --> pirq=2 -> irq=2 (gsi=2) [ 0.304399] xen: --> pirq=3 -> irq=3 (gsi=3) [ 0.304406] xen: --> pirq=4 -> irq=4 (gsi=4) [ 0.304413] xen: --> pirq=5 -> irq=5 (gsi=5) [ 0.304421] xen: --> pirq=6 -> irq=6 (gsi=6) [ 0.304428] xen: --> pirq=7 -> irq=7 (gsi=7) [ 0.304435] xen: --> pirq=8 -> irq=8 (gsi=8) [ 0.304442] xen: --> pirq=9 -> irq=9 (gsi=9) [ 0.304450] xen: --> pirq=10 -> irq=10 (gsi=10) [ 0.304457] xen: --> pirq=11 -> irq=11 (gsi=11) [ 0.304465] xen: --> pirq=12 -> irq=12 (gsi=12) [ 0.304472] xen: --> pirq=13 -> irq=13 (gsi=13) [ 0.304481] xen: --> pirq=14 -> irq=14 (gsi=14) [ 0.304488] xen: --> pirq=15 -> irq=15 (gsi=15) [ 0.304499] rcu: srcu_init: Setting srcu_struct sizes based on contention. [ 0.309854] Console: colour VGA+ 80x25 [ 0.324651] printk: console [tty0] enabled [ 0.325990] printk: console [hvc0] enabled [ 0.326128] ACPI: Core revision 20220331 [ 0.341623] clocksource: xen: mask: 0xffffffffffffffff max_cycles: 0x1cd42e4dffb, max_idle_ns: 881590591483 ns [ 0.341789] Xen: using vcpuop timer interface [ 0.341796] installing Xen timer for CPU 0 [ 0.341945] clocksource: tsc-early: mask: 0xffffffffffffffff max_cycles: 0x1fb63109b96, max_idle_ns: 440795265316 ns [ 0.342105] Calibrating delay loop (skipped), value calculated using timer frequency.. 4399.99 BogoMIPS (lpj=2199998) [ 0.342433] Last level iTLB entries: 4KB 64, 2MB 8, 4MB 8 [ 0.342551] Last level dTLB entries: 4KB 64, 2MB 0, 4MB 0, 1GB 4 [ 0.342678] Spectre V1 : Mitigation: usercopy/swapgs barriers and __user pointer sanitization [ 0.342827] Spectre V2 : Mitigation: Retpolines [ 0.343111] Spectre V2 : Spectre v2 / SpectreRSB mitigation: Filling RSB on context switch [ 0.343257] Spectre V2 : Spectre v2 / SpectreRSB : Filling RSB on VMEXIT [ 0.343377] Spectre V2 : Enabling Restricted Speculation for firmware calls [ 0.343498] Spectre V2 : mitigation: Enabling conditional Indirect Branch Prediction Barrier [ 0.343646] Spectre V2 : User space: Mitigation: STIBP via prctl [ 0.343765] Speculative Store Bypass: Mitigation: Speculative Store Bypass disabled via prctl [ 0.343917] MDS: Mitigation: Clear CPU buffers [ 0.344030] TAA: Mitigation: Clear CPU buffers [ 0.344108] MMIO Stale Data: Vulnerable: Clear CPU buffers attempted, no microcode [ 0.344274] x86/fpu: Supporting XSAVE feature 0x001: 'x87 floating point registers' [ 0.344422] x86/fpu: Supporting XSAVE feature 0x002: 'SSE registers' [ 0.344564] x86/fpu: Supporting XSAVE feature 0x004: 'AVX registers' [ 0.344684] x86/fpu: xstate_offset[2]: 576, xstate_sizes[2]: 256 [ 0.344803] x86/fpu: Enabled xstate features 0x7, context size is 832 bytes, using 'standard' format. [ 0.362541] Freeing SMP alternatives memory: 40K [ 0.362669] pid_max: default: 32768 minimum: 301 [ 0.363126] LSM: Security Framework initializing [ 0.363249] SELinux: Initializing. [ 0.363388] Mount-cache hash table entries: 1024 (order: 1, 8192 bytes, linear) [ 0.363542] Mountpoint-cache hash table entries: 1024 (order: 1, 8192 bytes, linear) [ 0.364195] cpu 0 spinlock event irq 25 [ 0.364315] VPMU disabled by hypervisor. [ 0.364749] cblist_init_generic: Setting adjustable number of callback queues. [ 0.364895] cblist_init_generic: Setting shift to 3 and lim to 1. [ 0.365052] Performance Events: unsupported p6 CPU model 86 no PMU driver, software events only. [ 0.365110] signal: max sigframe size: 1776 [ 0.365272] rcu: Hierarchical SRCU implementation. [ 0.365398] rcu: Max phase no-delay instances is 400. [ 0.365891] smp: Bringing up secondary CPUs ... [ 0.366225] installing Xen timer for CPU 1 [ 0.366693] cpu 1 spinlock event irq 35 [ 0.367246] MDS CPU bug present and SMT on, data leak possible. See https://www.kernel.org/doc/html/latest/admin-guide/hw-vuln/mds.html for more details. [ 0.367415] TAA CPU bug present and SMT on, data leak possible. See https://www.kernel.org/doc/html/latest/admin-guide/hw-vuln/tsx_async_abort.html for more details. [ 0.367604] MMIO Stale Data CPU bug present and SMT on, data leak possible. See https://www.kernel.org/doc/html/latest/admin-guide/hw-vuln/processor_mmio_stale_data.html for more details. [ 0.368326] installing Xen timer for CPU 2 [ 0.368782] cpu 2 spinlock event irq 41 [ 0.369202] installing Xen timer for CPU 3 [ 0.369647] cpu 3 spinlock event irq 47 [ 0.369647] installing Xen timer for CPU 4 [ 0.370443] cpu 4 spinlock event irq 53 [ 0.370443] installing Xen timer for CPU 5 [ 0.371272] cpu 5 spinlock event irq 59 [ 0.371310] installing Xen timer for CPU 6 [ 0.372147] cpu 6 spinlock event irq 65 [ 0.372358] installing Xen timer for CPU 7 [ 0.372787] cpu 7 spinlock event irq 71 [ 0.373368] smp: Brought up 1 node, 8 CPUs [ 0.373486] smpboot: Max logical packages: 1 [ 0.373705] devtmpfs: initialized [ 0.373705] x86/mm: Memory block size: 128MB [ 0.374344] ACPI: PM: Registering ACPI NVS region [mem 0x799b7000-0x79e5afff] (4866048 bytes) [ 0.374376] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 1911260446275000 ns [ 0.374550] futex hash table entries: 2048 (order: 5, 131072 bytes, linear) [ 0.374802] PM: RTC time: 04:52:10, date: 2024-06-24 [ 0.375351] NET: Registered PF_NETLINK/PF_ROUTE protocol family [ 0.375498] xen:grant_table: Grant tables using version 1 layout [ 0.375635] Grant table initialized [ 0.375941] audit: initializing netlink subsys (disabled) [ 0.376128] audit: type=2000 audit(1719204730.363:1): state=initialized audit_enabled=0 res=1 [ 0.376177] thermal_sys: Registered thermal governor 'step_wise' [ 0.376177] thermal_sys: Registered thermal governor 'user_space' [ 0.376304] ACPI FADT declares the system doesn't support PCIe ASPM, so disable it [ 0.376732] PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0x80000000-0x8fffffff] (base 0x80000000) [ 0.377111] PCI: MMCONFIG at [mem 0x80000000-0x8fffffff] reserved in E820 [ 0.504204] PCI: Using configuration type 1 for base access [ 0.507156] kprobes: kprobe jump-optimization is enabled. All kprobes are optimized if possible. [ 0.507333] ACPI: Added _OSI(Module Device) [ 0.507333] ACPI: Added _OSI(Processor Device) [ 0.507390] ACPI: Added _OSI(3.0 _SCP Extensions) [ 0.507503] ACPI: Added _OSI(Processor Aggregator Device) [ 0.537923] ACPI: 4 ACPI AML tables successfully acquired and loaded [ 0.539924] xen: registering gsi 9 triggering 0 polarity 0 [ 0.542501] ACPI: Dynamic OEM Table Load: [ 0.547534] ACPI: Interpreter enabled [ 0.547668] ACPI: PM: (supports S0 S4 S5) [ 0.547788] ACPI: Using IOAPIC for interrupt routing [ 0.547935] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug [ 0.548085] PCI: Using E820 reservations for host bridge windows [ 0.548569] ACPI: Enabled 6 GPEs in block 00 to 3F [ 0.572311] ACPI: PCI Root Bridge [UNC0] (domain 0000 [bus ff]) [ 0.572440] acpi PNP0A03:03: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI HPX-Type3] [ 0.572676] acpi PNP0A03:03: _OSC: platform does not support [LTR] [ 0.572947] acpi PNP0A03:03: _OSC: OS now controls [PME PCIeCapability] [ 0.573068] acpi PNP0A03:03: FADT indicates ASPM is unsupported, using BIOS configuration [ 0.573138] PCI host bridge to bus 0000:ff [ 0.573252] pci_bus 0000:ff: root bus resource [bus ff] [ 0.573445] pci 0000:ff:0b.0: [8086:6f81] type 00 class 0x088000 [ 0.573917] pci 0000:ff:0b.1: [8086:6f36] type 00 class 0x110100 [ 0.574357] pci 0000:ff:0b.2: [8086:6f37] type 00 class 0x110100 [ 0.574787] pci 0000:ff:0b.3: [8086:6f76] type 00 class 0x088000 [ 0.575237] pci 0000:ff:0c.0: [8086:6fe0] type 00 class 0x088000 [ 0.575660] pci 0000:ff:0c.1: [8086:6fe1] type 00 class 0x088000 [ 0.576082] pci 0000:ff:0c.2: [8086:6fe2] type 00 class 0x088000 [ 0.576411] pci 0000:ff:0c.3: [8086:6fe3] type 00 class 0x088000 [ 0.576860] pci 0000:ff:0f.0: [8086:6ff8] type 00 class 0x088000 [ 0.577297] pci 0000:ff:0f.4: [8086:6ffc] type 00 class 0x088000 [ 0.577720] pci 0000:ff:0f.5: [8086:6ffd] type 00 class 0x088000 [ 0.578150] pci 0000:ff:0f.6: [8086:6ffe] type 00 class 0x088000 [ 0.578578] pci 0000:ff:10.0: [8086:6f1d] type 00 class 0x088000 [ 0.579000] pci 0000:ff:10.1: [8086:6f34] type 00 class 0x110100 [ 0.579424] pci 0000:ff:10.5: [8086:6f1e] type 00 class 0x088000 [ 0.579855] pci 0000:ff:10.6: [8086:6f7d] type 00 class 0x110100 [ 0.580279] pci 0000:ff:10.7: [8086:6f1f] type 00 class 0x088000 [ 0.580706] pci 0000:ff:12.0: [8086:6fa0] type 00 class 0x088000 [ 0.580968] pci 0000:ff:12.1: [8086:6f30] type 00 class 0x110100 [ 0.581427] pci 0000:ff:13.0: [8086:6fa8] type 00 class 0x088000 [ 0.581900] pci 0000:ff:13.1: [8086:6f71] type 00 class 0x088000 [ 0.582371] pci 0000:ff:13.2: [8086:6faa] type 00 class 0x088000 [ 0.582838] pci 0000:ff:13.3: [8086:6fab] type 00 class 0x088000 [ 0.583307] pci 0000:ff:13.4: [8086:6fac] type 00 class 0x088000 [ 0.583775] pci 0000:ff:13.5: [8086:6fad] type 00 class 0x088000 [ 0.584237] pci 0000:ff:13.6: [8086:6fae] type 00 class 0x088000 [ 0.584662] pci 0000:ff:13.7: [8086:6faf] type 00 class 0x088000 [ 0.585098] pci 0000:ff:14.0: [8086:6fb0] type 00 class 0x088000 [ 0.585566] pci 0000:ff:14.1: [8086:6fb1] type 00 class 0x088000 [ 0.586032] pci 0000:ff:14.2: [8086:6fb2] type 00 class 0x088000 [ 0.586456] pci 0000:ff:14.3: [8086:6fb3] type 00 class 0x088000 [ 0.586914] pci 0000:ff:14.4: [8086:6fbc] type 00 class 0x088000 [ 0.587342] pci 0000:ff:14.5: [8086:6fbd] type 00 class 0x088000 [ 0.587766] pci 0000:ff:14.6: [8086:6fbe] type 00 class 0x088000 [ 0.588192] pci 0000:ff:14.7: [8086:6fbf] type 00 class 0x088000 [ 0.588624] pci 0000:ff:15.0: [8086:6fb4] type 00 class 0x088000 [ 0.589091] pci 0000:ff:15.1: [8086:6fb5] type 00 class 0x088000 [ 0.589456] pci 0000:ff:15.2: [8086:6fb6] type 00 class 0x088000 [ 0.589923] pci 0000:ff:15.3: [8086:6fb7] type 00 class 0x088000 [ 0.590438] pci 0000:ff:1e.0: [8086:6f98] type 00 class 0x088000 [ 0.590862] pci 0000:ff:1e.1: [8086:6f99] type 00 class 0x088000 [ 0.591285] pci 0000:ff:1e.2: [8086:6f9a] type 00 class 0x088000 [ 0.591715] pci 0000:ff:1e.3: [8086:6fc0] type 00 class 0x088000 [ 0.591964] pci 0000:ff:1e.4: [8086:6f9c] type 00 class 0x088000 [ 0.592405] pci 0000:ff:1f.0: [8086:6f88] type 00 class 0x088000 [ 0.592833] pci 0000:ff:1f.2: [8086:6f8a] type 00 class 0x088000 [ 0.593262] pci_bus 0000:ff: on NUMA node 0 [ 0.596561] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-fe]) [ 0.596689] acpi PNP0A08:00: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI HPX-Type3] [ 0.596965] acpi PNP0A08:00: _OSC: platform does not support [PME LTR] [ 0.597314] acpi PNP0A08:00: _OSC: OS now controls [PCIeCapability] [ 0.597436] acpi PNP0A08:00: FADT indicates ASPM is unsupported, using BIOS configuration [ 0.597926] PCI host bridge to bus 0000:00 [ 0.598040] pci_bus 0000:00: root bus resource [io 0x0000-0x0cf7 window] [ 0.598108] pci_bus 0000:00: root bus resource [io 0x1000-0xffff window] [ 0.598229] pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff window] [ 0.598374] pci_bus 0000:00: root bus resource [mem 0x90000000-0xfbffbfff window] [ 0.598519] pci_bus 0000:00: root bus resource [bus 00-fe] [ 0.598698] pci 0000:00:00.0: [8086:6f00] type 00 class 0x060000 [ 0.599339] pci 0000:00:01.0: [8086:6f02] type 01 class 0x060400 [ 0.599861] pci 0000:00:01.0: PME# supported from D0 D3hot D3cold [ 0.600233] pci 0000:00:01.1: [8086:6f03] type 01 class 0x060400 [ 0.600760] pci 0000:00:01.1: PME# supported from D0 D3hot D3cold [ 0.601150] pci 0000:00:02.0: [8086:6f04] type 01 class 0x060400 [ 0.601666] pci 0000:00:02.0: PME# supported from D0 D3hot D3cold [ 0.602021] pci 0000:00:02.2: [8086:6f06] type 01 class 0x060400 [ 0.602504] pci 0000:00:02.2: PME# supported from D0 D3hot D3cold [ 0.602880] pci 0000:00:03.0: [8086:6f08] type 01 class 0x060400 [ 0.603419] pci 0000:00:03.0: PME# supported from D0 D3hot D3cold [ 0.603788] pci 0000:00:03.2: [8086:6f0a] type 01 class 0x060400 [ 0.604311] pci 0000:00:03.2: PME# supported from D0 D3hot D3cold [ 0.604703] pci 0000:00:05.0: [8086:6f28] type 00 class 0x088000 [ 0.605281] pci 0000:00:05.1: [8086:6f29] type 00 class 0x088000 [ 0.605904] pci 0000:00:05.2: [8086:6f2a] type 00 class 0x088000 [ 0.606572] pci 0000:00:14.0: [8086:8c31] type 00 class 0x0c0330 [ 0.606790] pci 0000:00:14.0: reg 0x10: [mem 0xfb600000-0xfb60ffff 64bit] [ 0.607255] pci 0000:00:14.0: PME# supported from D3hot D3cold [ 0.607600] pci 0000:00:16.0: [8086:8c3a] type 00 class 0x078000 [ 0.607818] pci 0000:00:16.0: reg 0x10: [mem 0xfb617000-0xfb61700f 64bit] [ 0.608283] pci 0000:00:16.0: PME# supported from D0 D3hot D3cold [ 0.608591] pci 0000:00:16.1: [8086:8c3b] type 00 class 0x078000 [ 0.608809] pci 0000:00:16.1: reg 0x10: [mem 0xfb616000-0xfb61600f 64bit] [ 0.609271] pci 0000:00:16.1: PME# supported from D0 D3hot D3cold [ 0.609631] pci 0000:00:1a.0: [8086:8c2d] type 00 class 0x0c0320 [ 0.609829] pci 0000:00:1a.0: reg 0x10: [mem 0xfb614000-0xfb6143ff] [ 0.610388] pci 0000:00:1a.0: PME# supported from D0 D3hot D3cold [ 0.610707] pci 0000:00:1c.0: [8086:8c10] type 01 class 0x060400 [ 0.611263] pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold [ 0.611463] pci 0000:00:1c.0: Enabling MPC IRBNCE [ 0.611585] pci 0000:00:1c.0: Intel PCH root port ACS workaround enabled [ 0.619277] pci 0000:00:1c.1: [8086:8c12] type 01 class 0x060400 [ 0.619841] pci 0000:00:1c.1: PME# supported from D0 D3hot D3cold [ 0.620036] pci 0000:00:1c.1: Enabling MPC IRBNCE [ 0.620116] pci 0000:00:1c.1: Intel PCH root port ACS workaround enabled [ 0.620406] pci 0000:00:1c.3: [8086:8c16] type 01 class 0x060400 [ 0.620965] pci 0000:00:1c.3: PME# supported from D0 D3hot D3cold [ 0.621161] pci 0000:00:1c.3: Enabling MPC IRBNCE [ 0.621283] pci 0000:00:1c.3: Intel PCH root port ACS workaround enabled [ 0.621568] pci 0000:00:1c.4: [8086:8c18] type 01 class 0x060400 [ 0.622127] pci 0000:00:1c.4: PME# supported from D0 D3hot D3cold [ 0.622321] pci 0000:00:1c.4: Enabling MPC IRBNCE [ 0.622443] pci 0000:00:1c.4: Intel PCH root port ACS workaround enabled [ 0.622767] pci 0000:00:1d.0: [8086:8c26] type 00 class 0x0c0320 [ 0.622965] pci 0000:00:1d.0: reg 0x10: [mem 0xfb613000-0xfb6133ff] [ 0.623507] pci 0000:00:1d.0: PME# supported from D0 D3hot D3cold [ 0.623828] pci 0000:00:1f.0: [8086:8c54] type 00 class 0x060100 [ 0.624586] pci 0000:00:1f.2: [8086:8c02] type 00 class 0x010601 [ 0.624783] pci 0000:00:1f.2: reg 0x10: [io 0xf070-0xf077] [ 0.624956] pci 0000:00:1f.2: reg 0x14: [io 0xf060-0xf063] [ 0.625114] pci 0000:00:1f.2: reg 0x18: [io 0xf050-0xf057] [ 0.625272] pci 0000:00:1f.2: reg 0x1c: [io 0xf040-0xf043] [ 0.625429] pci 0000:00:1f.2: reg 0x20: [io 0xf020-0xf03f] [ 0.625587] pci 0000:00:1f.2: reg 0x24: [mem 0xfb612000-0xfb6127ff] [ 0.625899] pci 0000:00:1f.2: PME# supported from D3hot [ 0.626188] pci 0000:00:1f.3: [8086:8c22] type 00 class 0x0c0500 [ 0.626406] pci 0000:00:1f.3: reg 0x10: [mem 0xfb611000-0xfb6110ff 64bit] [ 0.626651] pci 0000:00:1f.3: reg 0x20: [io 0xf000-0xf01f] [ 0.627028] pci 0000:00:1f.6: [8086:8c24] type 00 class 0x118000 [ 0.627206] pci 0000:00:1f.6: reg 0x10: [mem 0xfb610000-0xfb610fff 64bit] [ 0.627925] pci 0000:00:01.0: PCI bridge to [bus 01] [ 0.628223] pci 0000:00:01.1: PCI bridge to [bus 02] [ 0.628556] pci 0000:03:00.0: [8086:6f50] type 00 class 0x088000 [ 0.628768] pci 0000:03:00.0: reg 0x10: [mem 0xfb506000-0xfb507fff 64bit] [ 0.629526] pci 0000:03:00.1: [8086:6f51] type 00 class 0x088000 [ 0.629739] pci 0000:03:00.1: reg 0x10: [mem 0xfb504000-0xfb505fff 64bit] [ 0.630449] pci 0000:03:00.2: [8086:6f52] type 00 class 0x088000 [ 0.630663] pci 0000:03:00.2: reg 0x10: [mem 0xfb502000-0xfb503fff 64bit] [ 0.631371] pci 0000:03:00.3: [8086:6f53] type 00 class 0x088000 [ 0.631584] pci 0000:03:00.3: reg 0x10: [mem 0xfb500000-0xfb501fff 64bit] [ 0.632303] pci 0000:00:02.0: PCI bridge to [bus 03] [ 0.632439] pci 0000:00:02.0: bridge window [mem 0xfb500000-0xfb5fffff] [ 0.632779] pci 0000:04:00.0: [8086:15ac] type 00 class 0x020000 [ 0.632996] pci 0000:04:00.0: reg 0x10: [mem 0xfbc00000-0xfbdfffff 64bit pref] [ 0.633248] pci 0000:04:00.0: reg 0x20: [mem 0xfbe04000-0xfbe07fff 64bit pref] [ 0.633432] pci 0000:04:00.0: reg 0x30: [mem 0xfb480000-0xfb4fffff pref] [ 0.633783] pci 0000:04:00.0: PME# supported from D0 D3hot D3cold [ 0.634004] pci 0000:04:00.0: reg 0x184: [mem 0x00000000-0x00003fff 64bit] [ 0.634107] pci 0000:04:00.0: VF(n) BAR0 space: [mem 0x00000000-0x000fffff 64bit] (contains BAR0 for 64 VFs) [ 0.634312] pci 0000:04:00.0: reg 0x190: [mem 0x00000000-0x00003fff 64bit] [ 0.634450] pci 0000:04:00.0: VF(n) BAR3 space: [mem 0x00000000-0x000fffff 64bit] (contains BAR3 for 64 VFs) [ 0.635023] pci 0000:04:00.1: [8086:15ac] type 00 class 0x020000 [ 0.635201] pci 0000:04:00.1: reg 0x10: [mem 0xfba00000-0xfbbfffff 64bit pref] [ 0.635486] pci 0000:04:00.1: reg 0x20: [mem 0xfbe00000-0xfbe03fff 64bit pref] [ 0.635670] pci 0000:04:00.1: reg 0x30: [mem 0xfb400000-0xfb47ffff pref] [ 0.636022] pci 0000:04:00.1: PME# supported from D0 D3hot D3cold [ 0.636190] pci 0000:04:00.1: reg 0x184: [mem 0x00000000-0x00003fff 64bit] [ 0.636312] pci 0000:04:00.1: VF(n) BAR0 space: [mem 0x00000000-0x000fffff 64bit] (contains BAR0 for 64 VFs) [ 0.636515] pci 0000:04:00.1: reg 0x190: [mem 0x00000000-0x00003fff 64bit] [ 0.636636] pci 0000:04:00.1: VF(n) BAR3 space: [mem 0x00000000-0x000fffff 64bit] (contains BAR3 for 64 VFs) [ 0.637189] pci 0000:00:02.2: PCI bridge to [bus 04] [ 0.637324] pci 0000:00:02.2: bridge window [mem 0xfb400000-0xfb4fffff] [ 0.637463] pci 0000:00:02.2: bridge window [mem 0xfba00000-0xfbefffff 64bit pref] [ 0.637753] pci 0000:00:03.0: PCI bridge to [bus 05] [ 0.638045] pci 0000:00:03.2: PCI bridge to [bus 06] [ 0.638358] pci 0000:07:00.0: working around ROM BAR overlap defect [ 0.638478] pci 0000:07:00.0: [8086:1533] type 00 class 0x020000 [ 0.638685] pci 0000:07:00.0: reg 0x10: [mem 0xfb300000-0xfb37ffff] [ 0.638901] pci 0000:07:00.0: reg 0x18: [io 0xe000-0xe01f] [ 0.639067] pci 0000:07:00.0: reg 0x1c: [mem 0xfb380000-0xfb383fff] [ 0.639518] pci 0000:07:00.0: PME# supported from D0 D3hot D3cold [ 0.639990] pci 0000:00:1c.0: PCI bridge to [bus 07] [ 0.640117] pci 0000:00:1c.0: bridge window [io 0xe000-0xefff] [ 0.640246] pci 0000:00:1c.0: bridge window [mem 0xfb300000-0xfb3fffff] [ 0.640599] pci 0000:08:00.0: working around ROM BAR overlap defect [ 0.640719] pci 0000:08:00.0: [8086:1533] type 00 class 0x020000 [ 0.640925] pci 0000:08:00.0: reg 0x10: [mem 0xfb200000-0xfb27ffff] [ 0.641150] pci 0000:08:00.0: reg 0x18: [io 0xd000-0xd01f] [ 0.641315] pci 0000:08:00.0: reg 0x1c: [mem 0xfb280000-0xfb283fff] [ 0.641845] pci 0000:08:00.0: PME# supported from D0 D3hot D3cold [ 0.642309] pci 0000:00:1c.1: PCI bridge to [bus 08] [ 0.642442] pci 0000:00:1c.1: bridge window [io 0xd000-0xdfff] [ 0.642571] pci 0000:00:1c.1: bridge window [mem 0xfb200000-0xfb2fffff] [ 0.642909] pci 0000:09:00.0: [1a03:1150] type 01 class 0x060400 [ 0.643302] pci 0000:09:00.0: enabling Extended Tags [ 0.643643] pci 0000:09:00.0: supports D1 D2 [ 0.643765] pci 0000:09:00.0: PME# supported from D0 D1 D2 D3hot D3cold [ 0.644125] pci 0000:00:1c.3: PCI bridge to [bus 09-0a] [ 0.644252] pci 0000:00:1c.3: bridge window [io 0xc000-0xcfff] [ 0.644380] pci 0000:00:1c.3: bridge window [mem 0xfa000000-0xfb0fffff] [ 0.644682] pci_bus 0000:0a: extended config space not accessible [ 0.644853] pci 0000:0a:00.0: [1a03:2000] type 00 class 0x030000 [ 0.645059] pci 0000:0a:00.0: reg 0x10: [mem 0xfa000000-0xfaffffff] [ 0.645155] pci 0000:0a:00.0: reg 0x14: [mem 0xfb000000-0xfb01ffff] [ 0.645322] pci 0000:0a:00.0: reg 0x18: [io 0xc000-0xc07f] [ 0.645675] pci 0000:0a:00.0: Video device with shadowed ROM at [mem 0x000c0000-0x000dffff] [ 0.645966] pci 0000:0a:00.0: supports D1 D2 [ 0.646079] pci 0000:0a:00.0: PME# supported from D0 D1 D2 D3hot D3cold [ 0.646426] pci 0000:09:00.0: PCI bridge to [bus 0a] [ 0.646565] pci 0000:09:00.0: bridge window [io 0xc000-0xcfff] [ 0.646695] pci 0000:09:00.0: bridge window [mem 0xfa000000-0xfb0fffff] [ 0.647083] pci 0000:0b:00.0: [8086:1521] type 00 class 0x020000 [ 0.647188] pci 0000:0b:00.0: reg 0x10: [mem 0xfb160000-0xfb17ffff] [ 0.647398] pci 0000:0b:00.0: reg 0x18: [io 0xb060-0xb07f] [ 0.647559] pci 0000:0b:00.0: reg 0x1c: [mem 0xfb18c000-0xfb18ffff] [ 0.648082] pci 0000:0b:00.0: PME# supported from D0 D3hot D3cold [ 0.648223] pci 0000:0b:00.0: reg 0x184: [mem 0x00000000-0x00003fff 64bit pref] [ 0.648368] pci 0000:0b:00.0: VF(n) BAR0 space: [mem 0x00000000-0x0001ffff 64bit pref] (contains BAR0 for 8 VFs) [ 0.648586] pci 0000:0b:00.0: reg 0x190: [mem 0x00000000-0x00003fff 64bit pref] [ 0.648730] pci 0000:0b:00.0: VF(n) BAR3 space: [mem 0x00000000-0x0001ffff 64bit pref] (contains BAR3 for 8 VFs) [ 0.649302] pci 0000:0b:00.1: [8086:1521] type 00 class 0x020000 [ 0.649504] pci 0000:0b:00.1: reg 0x10: [mem 0xfb140000-0xfb15ffff] [ 0.649713] pci 0000:0b:00.1: reg 0x18: [io 0xb040-0xb05f] [ 0.649874] pci 0000:0b:00.1: reg 0x1c: [mem 0xfb188000-0xfb18bfff] [ 0.650386] pci 0000:0b:00.1: PME# supported from D0 D3hot D3cold [ 0.650617] pci 0000:0b:00.1: reg 0x184: [mem 0x00000000-0x00003fff 64bit pref] [ 0.650762] pci 0000:0b:00.1: VF(n) BAR0 space: [mem 0x00000000-0x0001ffff 64bit pref] (contains BAR0 for 8 VFs) [ 0.650980] pci 0000:0b:00.1: reg 0x190: [mem 0x00000000-0x00003fff 64bit pref] [ 0.651107] pci 0000:0b:00.1: VF(n) BAR3 space: [mem 0x00000000-0x0001ffff 64bit pref] (contains BAR3 for 8 VFs) [ 0.651638] pci 0000:0b:00.2: [8086:1521] type 00 class 0x020000 [ 0.651839] pci 0000:0b:00.2: reg 0x10: [mem 0xfb120000-0xfb13ffff] [ 0.652048] pci 0000:0b:00.2: reg 0x18: [io 0xb020-0xb03f] [ 0.652153] pci 0000:0b:00.2: reg 0x1c: [mem 0xfb184000-0xfb187fff] [ 0.652664] pci 0000:0b:00.2: PME# supported from D0 D3hot D3cold [ 0.652894] pci 0000:0b:00.2: reg 0x184: [mem 0x00000000-0x00003fff 64bit pref] [ 0.653043] pci 0000:0b:00.2: VF(n) BAR0 space: [mem 0x00000000-0x0001ffff 64bit pref] (contains BAR0 for 8 VFs) [ 0.653171] pci 0000:0b:00.2: reg 0x190: [mem 0x00000000-0x00003fff 64bit pref] [ 0.653316] pci 0000:0b:00.2: VF(n) BAR3 space: [mem 0x00000000-0x0001ffff 64bit pref] (contains BAR3 for 8 VFs) [ 0.653835] pci 0000:0b:00.3: [8086:1521] type 00 class 0x020000 [ 0.654036] pci 0000:0b:00.3: reg 0x10: [mem 0xfb100000-0xfb11ffff] [ 0.654203] pci 0000:0b:00.3: reg 0x18: [io 0xb000-0xb01f] [ 0.654365] pci 0000:0b:00.3: reg 0x1c: [mem 0xfb180000-0xfb183fff] [ 0.654876] pci 0000:0b:00.3: PME# supported from D0 D3hot D3cold [ 0.655107] pci 0000:0b:00.3: reg 0x184: [mem 0x00000000-0x00003fff 64bit pref] [ 0.655252] pci 0000:0b:00.3: VF(n) BAR0 space: [mem 0x00000000-0x0001ffff 64bit pref] (contains BAR0 for 8 VFs) [ 0.655470] pci 0000:0b:00.3: reg 0x190: [mem 0x00000000-0x00003fff 64bit pref] [ 0.655619] pci 0000:0b:00.3: VF(n) BAR3 space: [mem 0x00000000-0x0001ffff 64bit pref] (contains BAR3 for 8 VFs) [ 0.656202] pci 0000:00:1c.4: PCI bridge to [bus 0b] [ 0.656329] pci 0000:00:1c.4: bridge window [io 0xb000-0xbfff] [ 0.656457] pci 0000:00:1c.4: bridge window [mem 0xfb100000-0xfb1fffff] [ 0.656597] pci 0000:00:1c.4: bridge has subordinate 0b but max busn 0c [ 0.657065] pci_bus 0000:00: on NUMA node 0 [ 0.657164] xen: registering gsi 13 triggering 1 polarity 0 [ 0.658136] ACPI: PCI: Interrupt link LNKA configured for IRQ 11 [ 0.658333] ACPI: PCI: Interrupt link LNKB configured for IRQ 10 [ 0.658524] ACPI: PCI: Interrupt link LNKC configured for IRQ 5 [ 0.658713] ACPI: PCI: Interrupt link LNKD configured for IRQ 11 [ 0.658903] ACPI: PCI: Interrupt link LNKE configured for IRQ 0 [ 0.659021] ACPI: PCI: Interrupt link LNKE disabled [ 0.659179] ACPI: PCI: Interrupt link LNKF configured for IRQ 0 [ 0.659298] ACPI: PCI: Interrupt link LNKF disabled [ 0.659482] ACPI: PCI: Interrupt link LNKG configured for IRQ 0 [ 0.659600] ACPI: PCI: Interrupt link LNKG disabled [ 0.659791] ACPI: PCI: Interrupt link LNKH configured for IRQ 0 [ 0.659910] ACPI: PCI: Interrupt link LNKH disabled [ 0.660177] xen:balloon: Initialising balloon driver [ 0.660317] iommu: Default domain type: Translated [ 0.667109] iommu: DMA domain TLB invalidation policy: lazy mode [ 0.667295] SCSI subsystem initialized [ 0.668141] libata version 3.00 loaded. [ 0.668145] ACPI: bus type USB registered [ 0.668272] usbcore: registered new interface driver usbfs [ 0.668394] usbcore: registered new interface driver hub [ 0.668515] usbcore: registered new device driver usb [ 0.668643] pps_core: LinuxPPS API ver. 1 registered [ 0.669110] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti [ 0.669263] PTP clock support registered [ 0.669398] Advanced Linux Sound Architecture Driver Initialized. [ 0.669400] NetLabel: Initializing [ 0.669511] NetLabel: domain hash size = 128 [ 0.669624] NetLabel: protocols = UNLABELED CIPSOv4 CALIPSO [ 0.670124] NetLabel: unlabeled traffic allowed by default [ 0.670263] PCI: Using ACPI for IRQ routing [ 0.704679] PCI: pci_cache_line_size set to 64 bytes [ 0.705455] e820: reserve RAM buffer [mem 0x0009a000-0x0009ffff] [ 0.705458] e820: reserve RAM buffer [mem 0x20066000-0x23ffffff] [ 0.705482] pci 0000:0a:00.0: vgaarb: setting as boot VGA device [ 0.705482] pci 0000:0a:00.0: vgaarb: bridge control possible [ 0.705482] pci 0000:0a:00.0: vgaarb: VGA device added: decodes=io+mem,owns=io+mem,locks=none [ 0.705539] vgaarb: loaded [ 0.708106] clocksource: Switched to clocksource tsc-early [ 0.708151] VFS: Disk quotas dquot_6.6.0 [ 0.708151] VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes) [ 0.708629] hugetlbfs: disabling because there are no supported hugepage sizes [ 0.708789] pnp: PnP ACPI init [ 0.709279] xen: registering gsi 8 triggering 1 polarity 0 [ 0.709473] system 00:01: [io 0x0500-0x057f] has been reserved [ 0.709599] system 00:01: [io 0x0400-0x047f] has been reserved [ 0.709718] system 00:01: [io 0x0580-0x059f] has been reserved [ 0.709837] system 00:01: [io 0x0600-0x061f] has been reserved [ 0.709955] system 00:01: [io 0x0880-0x0883] has been reserved [ 0.710074] system 00:01: [io 0x0800-0x081f] has been reserved [ 0.710222] system 00:01: [mem 0xfed1c000-0xfed3ffff] could not be reserved [ 0.710346] system 00:01: [mem 0xfed45000-0xfed8bfff] has been reserved [ 0.710466] system 00:01: [mem 0xff000000-0xffffffff] has been reserved [ 0.710586] system 00:01: [mem 0xfee00000-0xfeefffff] has been reserved [ 0.710706] system 00:01: [mem 0xfed12000-0xfed1200f] has been reserved [ 0.710826] system 00:01: [mem 0xfed12010-0xfed1201f] has been reserved [ 0.710946] system 00:01: [mem 0xfed1b000-0xfed1bfff] has been reserved [ 0.711377] system 00:02: [io 0x0a00-0x0a0f] has been reserved [ 0.711502] system 00:02: [io 0x0a10-0x0a1f] has been reserved [ 0.711627] system 00:02: [io 0x0a20-0x0a2f] has been reserved [ 0.711746] system 00:02: [io 0x0a30-0x0a3f] has been reserved [ 0.711864] system 00:02: [io 0x0a40-0x0a4f] has been reserved [ 0.712313] xen: registering gsi 4 triggering 1 polarity 0 [ 0.712319] Already setup the GSI :4 [ 0.712432] pnp 00:03: [dma 0 disabled] [ 0.712745] xen: registering gsi 3 triggering 1 polarity 0 [ 0.712755] pnp 00:04: [dma 0 disabled] [ 0.713352] pnp: PnP ACPI: found 5 devices [ 0.744563] PM-Timer failed consistency check (0xffffff) - aborting. [ 0.744756] NET: Registered PF_INET protocol family [ 0.744924] IP idents hash table entries: 8192 (order: 4, 65536 bytes, linear) [ 0.745305] tcp_listen_portaddr_hash hash table entries: 256 (order: 0, 4096 bytes, linear) [ 0.745457] Table-perturb hash table entries: 65536 (order: 6, 262144 bytes, linear) [ 0.745604] TCP established hash table entries: 4096 (order: 3, 32768 bytes, linear) [ 0.745754] TCP bind hash table entries: 4096 (order: 5, 131072 bytes, linear) [ 0.745923] TCP: Hash tables configured (established 4096 bind 4096) [ 0.746065] UDP hash table entries: 256 (order: 1, 8192 bytes, linear) [ 0.746240] UDP-Lite hash table entries: 256 (order: 1, 8192 bytes, linear) [ 0.746423] NET: Registered PF_UNIX/PF_LOCAL protocol family [ 0.746794] RPC: Registered named UNIX socket transport module. [ 0.746920] RPC: Registered udp transport module. [ 0.747034] RPC: Registered tcp transport module. [ 0.747177] RPC: Registered tcp NFSv4.1 backchannel transport module. [ 0.747732] pci 0000:00:1c.4: bridge window [mem 0x00100000-0x000fffff 64bit pref] to [bus 0b] add_size 100000 add_align 100000 [ 0.747904] clipped [mem size 0x00000000 64bit pref] to [mem size 0xfffffffffffa0000 64bit pref] for e820 entry [mem 0x0009ac00-0x000fffff] [ 0.748068] clipped [mem size 0x00020000 64bit pref] to [mem size 0xfffffffffffc0000 64bit pref] for e820 entry [mem 0x0009ac00-0x000fffff] [ 0.748252] pci 0000:00:1c.4: BAR 15: assigned [mem 0x90000000-0x900fffff 64bit pref] [ 0.748401] pci 0000:00:01.0: PCI bridge to [bus 01] [ 0.748576] pci 0000:00:01.1: PCI bridge to [bus 02] [ 0.748750] pci 0000:00:02.0: PCI bridge to [bus 03] [ 0.748884] pci 0000:00:02.0: bridge window [mem 0xfb500000-0xfb5fffff] [ 0.749053] pci 0000:04:00.0: BAR 7: no space for [mem size 0x00100000 64bit] [ 0.749188] pci 0000:04:00.0: BAR 7: failed to assign [mem size 0x00100000 64bit] [ 0.749334] pci 0000:04:00.0: BAR 10: no space for [mem size 0x00100000 64bit] [ 0.749478] pci 0000:04:00.0: BAR 10: failed to assign [mem size 0x00100000 64bit] [ 0.749623] pci 0000:04:00.1: BAR 7: no space for [mem size 0x00100000 64bit] [ 0.749745] pci 0000:04:00.1: BAR 7: failed to assign [mem size 0x00100000 64bit] [ 0.749890] pci 0000:04:00.1: BAR 10: no space for [mem size 0x00100000 64bit] [ 0.750034] pci 0000:04:00.1: BAR 10: failed to assign [mem size 0x00100000 64bit] [ 0.750201] pci 0000:04:00.0: BAR 7: no space for [mem size 0x00100000 64bit] [ 0.750326] pci 0000:04:00.0: BAR 7: failed to assign [mem size 0x00100000 64bit] [ 0.750476] pci 0000:04:00.0: BAR 10: no space for [mem size 0x00100000 64bit] [ 0.750621] pci 0000:04:00.0: BAR 10: failed to assign [mem size 0x00100000 64bit] [ 0.750766] pci 0000:04:00.1: BAR 7: no space for [mem size 0x00100000 64bit] [ 0.750888] pci 0000:04:00.1: BAR 7: failed to assign [mem size 0x00100000 64bit] [ 0.751032] pci 0000:04:00.1: BAR 10: no space for [mem size 0x00100000 64bit] [ 0.751205] pci 0000:04:00.1: BAR 10: failed to assign [mem size 0x00100000 64bit] [ 0.751354] pci 0000:00:02.2: PCI bridge to [bus 04] [ 0.751489] pci 0000:00:02.2: bridge window [mem 0xfb400000-0xfb4fffff] [ 0.751622] pci 0000:00:02.2: bridge window [mem 0xfba00000-0xfbefffff 64bit pref] [ 0.751797] pci 0000:00:03.0: PCI bridge to [bus 05] [ 0.751970] pci 0000:00:03.2: PCI bridge to [bus 06] [ 0.752158] pci 0000:00:1c.0: PCI bridge to [bus 07] [ 0.752292] pci 0000:00:1c.0: bridge window [io 0xe000-0xefff] [ 0.752434] pci 0000:00:1c.0: bridge window [mem 0xfb300000-0xfb3fffff] [ 0.752595] pci 0000:00:1c.1: PCI bridge to [bus 08] [ 0.752715] pci 0000:00:1c.1: bridge window [io 0xd000-0xdfff] [ 0.752853] pci 0000:00:1c.1: bridge window [mem 0xfb200000-0xfb2fffff] [ 0.753016] pci 0000:09:00.0: PCI bridge to [bus 0a] [ 0.753162] pci 0000:09:00.0: bridge window [io 0xc000-0xcfff] [ 0.753319] pci 0000:09:00.0: bridge window [mem 0xfa000000-0xfb0fffff] [ 0.753485] pci 0000:00:1c.3: PCI bridge to [bus 09-0a] [ 0.753606] pci 0000:00:1c.3: bridge window [io 0xc000-0xcfff] [ 0.753744] pci 0000:00:1c.3: bridge window [mem 0xfa000000-0xfb0fffff] [ 0.753922] pci 0000:0b:00.0: BAR 7: assigned [mem 0x90000000-0x9001ffff 64bit pref] [ 0.754080] pci 0000:0b:00.0: BAR 10: assigned [mem 0x90020000-0x9003ffff 64bit pref] [ 0.754255] pci 0000:0b:00.1: BAR 7: assigned [mem 0x90040000-0x9005ffff 64bit pref] [ 0.754410] pci 0000:0b:00.1: BAR 10: assigned [mem 0x90060000-0x9007ffff 64bit pref] [ 0.754570] pci 0000:0b:00.2: BAR 7: assigned [mem 0x90080000-0x9009ffff 64bit pref] [ 0.754723] pci 0000:0b:00.2: BAR 10: assigned [mem 0x900a0000-0x900bffff 64bit pref] [ 0.754876] pci 0000:0b:00.3: BAR 7: assigned [mem 0x900c0000-0x900dffff 64bit pref] [ 0.755028] pci 0000:0b:00.3: BAR 10: assigned [mem 0x900e0000-0x900fffff 64bit pref] [ 0.755209] pci 0000:00:1c.4: PCI bridge to [bus 0b] [ 0.755332] pci 0000:00:1c.4: bridge window [io 0xb000-0xbfff] [ 0.755471] pci 0000:00:1c.4: bridge window [mem 0xfb100000-0xfb1fffff] [ 0.755605] pci 0000:00:1c.4: bridge window [mem 0x90000000-0x900fffff 64bit pref] [ 0.755778] pci_bus 0000:00: Some PCI device resources are unassigned, try booting with pci=realloc [ 0.755932] pci_bus 0000:00: resource 4 [io 0x0000-0x0cf7 window] [ 0.756067] pci_bus 0000:00: resource 5 [io 0x1000-0xffff window] [ 0.756198] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff window] [ 0.756320] pci_bus 0000:00: resource 7 [mem 0x90000000-0xfbffbfff window] [ 0.756441] pci_bus 0000:03: resource 1 [mem 0xfb500000-0xfb5fffff] [ 0.756560] pci_bus 0000:04: resource 1 [mem 0xfb400000-0xfb4fffff] [ 0.756678] pci_bus 0000:04: resource 2 [mem 0xfba00000-0xfbefffff 64bit pref] [ 0.756823] pci_bus 0000:07: resource 0 [io 0xe000-0xefff] [ 0.756939] pci_bus 0000:07: resource 1 [mem 0xfb300000-0xfb3fffff] [ 0.757058] pci_bus 0000:08: resource 0 [io 0xd000-0xdfff] [ 0.757195] pci_bus 0000:08: resource 1 [mem 0xfb200000-0xfb2fffff] [ 0.757323] pci_bus 0000:09: resource 0 [io 0xc000-0xcfff] [ 0.757440] pci_bus 0000:09: resource 1 [mem 0xfa000000-0xfb0fffff] [ 0.757559] pci_bus 0000:0a: resource 0 [io 0xc000-0xcfff] [ 0.757675] pci_bus 0000:0a: resource 1 [mem 0xfa000000-0xfb0fffff] [ 0.757793] pci_bus 0000:0b: resource 0 [io 0xb000-0xbfff] [ 0.757909] pci_bus 0000:0b: resource 1 [mem 0xfb100000-0xfb1fffff] [ 0.758028] pci_bus 0000:0b: resource 2 [mem 0x90000000-0x900fffff 64bit pref] [ 0.758595] pci 0000:00:05.0: disabled boot interrupts on device [8086:6f28] [ 0.758824] xen: registering gsi 19 triggering 0 polarity 1 [ 0.758851] xen: --> pirq=19 -> irq=19 (gsi=19) [ 0.767661] xen: registering gsi 18 triggering 0 polarity 1 [ 0.767682] xen: --> pirq=18 -> irq=18 (gsi=18) [ 0.783342] pci 0000:00:1a.0: quirk_usb_early_handoff+0x0/0x720 took 15364 usecs [ 0.783587] xen: registering gsi 18 triggering 0 polarity 1 [ 0.783593] Already setup the GSI :18 [ 0.799571] pci 0000:00:1d.0: quirk_usb_early_handoff+0x0/0x720 took 15663 usecs [ 0.799800] pci 0000:04:00.0: CLS mismatch (64 != 32), using 64 bytes [ 0.799943] PCI-DMA: Using software bounce buffering for IO (SWIOTLB) [ 0.800019] Unpacking initramfs... [ 0.800062] software IO TLB: mapped [mem 0x000000001b180000-0x000000001f180000] (64MB) [ 0.800427] kvm: no hardware support for 'kvm_intel' [ 0.808271] has_svm: not amd or hygon [ 0.808386] kvm: no hardware support for 'kvm_amd' [ 0.808503] clocksource: tsc: mask: 0xffffffffffffffff max_cycles: 0x1fb63109b96, max_idle_ns: 440795265316 ns [ 0.809048] clocksource: Switched to clocksource tsc [ 0.812002] Initialise system trusted keyrings [ 0.812308] workingset: timestamp_bits=62 max_order=17 bucket_order=0 [ 0.813782] NFS: Registering the id_resolver key type [ 0.813906] Key type id_resolver registered [ 0.814018] Key type id_legacy registered [ 0.814226] 9p: Installing v9fs 9p2000 file system support [ 0.827892] Key type asymmetric registered [ 0.828017] Asymmetric key parser 'x509' registered [ 0.828157] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 251) [ 0.828312] io scheduler mq-deadline registered [ 0.828426] io scheduler kyber registered [ 0.829307] xen: registering gsi 16 triggering 0 polarity 1 [ 0.829337] xen: --> pirq=16 -> irq=16 (gsi=16) [ 0.829909] xen: registering gsi 16 triggering 0 polarity 1 [ 0.829915] Already setup the GSI :16 [ 0.830518] xen: registering gsi 16 triggering 0 polarity 1 [ 0.830523] Already setup the GSI :16 [ 0.830861] xen: registering gsi 16 triggering 0 polarity 1 [ 0.830865] Already setup the GSI :16 [ 0.831185] xen: registering gsi 16 triggering 0 polarity 1 [ 0.831188] Already setup the GSI :16 [ 0.831804] xen: registering gsi 16 triggering 0 polarity 1 [ 0.831809] Already setup the GSI :16 [ 0.832402] xen: registering gsi 16 triggering 0 polarity 1 [ 0.832407] Already setup the GSI :16 [ 0.832859] xen: registering gsi 17 triggering 0 polarity 1 [ 0.832876] xen: --> pirq=17 -> irq=17 (gsi=17) [ 0.833210] xen: registering gsi 19 triggering 0 polarity 1 [ 0.833215] Already setup the GSI :19 [ 0.833665] xen: registering gsi 16 triggering 0 polarity 1 [ 0.833669] Already setup the GSI :16 [ 0.834328] input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input0 [ 0.834504] ACPI: button: Power Button [PWRB] [ 0.834685] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input1 [ 0.834905] ACPI: button: Power Button [PWRF] [ 0.835189] Monitor-Mwait will be used to enter C-1 state [ 0.835225] Monitor-Mwait will be used to enter C-2 state [ 0.835241] ACPI: \_SB_.SCK0.CP00: Found 2 idle states [ 0.835668] ACPI: \_SB_.SCK0.CP01: Found 2 idle states [ 0.835976] ACPI: \_SB_.SCK0.CP02: Found 2 idle states [ 0.836325] ACPI: \_SB_.SCK0.CP03: Found 2 idle states [ 0.836920] ACPI: \_SB_.SCK0.CP04: Found 2 idle states [ 0.837378] ACPI: \_SB_.SCK0.CP05: Found 2 idle states [ 0.837883] ACPI: \_SB_.SCK0.CP06: Found 2 idle states [ 0.838333] ACPI: \_SB_.SCK0.CP07: Found 2 idle states [ 0.839211] xen:xen_evtchn: Event-channel device installed [ 0.839407] xen_pciback: backend is vpci [ 0.840138] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled [ 0.840443] 00:04: ttyS1 at I/O 0x2f8 (irq = 3, base_baud = 115200) is a 16550A [ 0.841138] hpet_acpi_add: no address or irqs in _CRS [ 0.841401] Non-volatile memory driver v1.3 [ 0.841515] AMD-Vi: AMD IOMMUv2 functionality not available on this system - This is not a bug. [ 0.844052] loop: module loaded [ 0.850004] ahci 0000:00:1f.2: version 3.0 [ 0.850109] xen: registering gsi 16 triggering 0 polarity 1 [ 0.850118] Already setup the GSI :16 [ 0.850443] ahci 0000:00:1f.2: AHCI 0001.0300 32 slots 6 ports 6 Gbps 0x3f impl SATA mode [ 0.850593] ahci 0000:00:1f.2: flags: 64bit ncq led clo pio ems apst [ 0.866286] scsi host0: ahci [ 0.866678] scsi host1: ahci [ 0.867073] scsi host2: ahci [ 0.867381] scsi host3: ahci [ 0.867726] scsi host4: ahci [ 0.868064] scsi host5: ahci [ 0.868210] ata1: SATA max UDMA/133 abar m2048@0xfb612000 port 0xfb612100 irq 75 [ 0.868357] ata2: SATA max UDMA/133 abar m2048@0xfb612000 port 0xfb612180 irq 75 [ 0.868502] ata3: SATA max UDMA/133 abar m2048@0xfb612000 port 0xfb612200 irq 75 [ 0.868660] ata4: SATA max UDMA/133 abar m2048@0xfb612000 port 0xfb612280 irq 75 [ 0.868804] ata5: SATA max UDMA/133 abar m2048@0xfb612000 port 0xfb612300 irq 75 [ 0.868956] ata6: SATA max UDMA/133 abar m2048@0xfb612000 port 0xfb612380 irq 75 [ 0.869391] tun: Universal TUN/TAP device driver, 1.6 [ 0.869650] e100: Intel(R) PRO/100 Network Driver [ 0.869789] e100: Copyright(c) 1999-2006 Intel Corporation [ 0.869928] sky2: driver version 1.30 [ 0.870115] xen_netfront: Initialising Xen virtual ethernet driver [ 0.870476] xen: registering gsi 18 triggering 0 polarity 1 [ 0.870485] Already setup the GSI :18 [ 0.870713] ehci-pci 0000:00:1a.0: EHCI Host Controller [ 0.870909] ehci-pci 0000:00:1a.0: new USB bus registered, assigned bus number 1 [ 0.871085] ehci-pci 0000:00:1a.0: debug port 2 [ 0.875204] ehci-pci 0000:00:1a.0: irq 18, io mem 0xfb614000 [ 0.881654] ehci-pci 0000:00:1a.0: USB 2.0 started, EHCI 1.00 [ 0.881874] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 6.01 [ 0.882023] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 0.882167] usb usb1: Product: EHCI Host Controller [ 0.882281] usb usb1: Manufacturer: Linux 6.1.95+ ehci_hcd [ 0.882397] usb usb1: SerialNumber: 0000:00:1a.0 [ 0.882682] hub 1-0:1.0: USB hub found [ 0.882812] hub 1-0:1.0: 2 ports detected [ 0.883176] xen: registering gsi 18 triggering 0 polarity 1 [ 0.883185] Already setup the GSI :18 [ 0.883379] ehci-pci 0000:00:1d.0: EHCI Host Controller [ 0.883584] ehci-pci 0000:00:1d.0: new USB bus registered, assigned bus number 2 [ 0.883774] ehci-pci 0000:00:1d.0: debug port 2 [ 0.887855] ehci-pci 0000:00:1d.0: irq 18, io mem 0xfb613000 [ 0.894660] ehci-pci 0000:00:1d.0: USB 2.0 started, EHCI 1.00 [ 0.894881] usb usb2: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 6.01 [ 0.895029] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 0.895173] usb usb2: Product: EHCI Host Controller [ 0.895295] usb usb2: Manufacturer: Linux 6.1.95+ ehci_hcd [ 0.895412] usb usb2: SerialNumber: 0000:00:1d.0 [ 0.895692] hub 2-0:1.0: USB hub found [ 0.895817] hub 2-0:1.0: 2 ports detected [ 0.896251] xen: registering gsi 19 triggering 0 polarity 1 [ 0.896260] Already setup the GSI :19 [ 0.896466] xhci_hcd 0000:00:14.0: xHCI Host Controller [ 0.896695] xhci_hcd 0000:00:14.0: new USB bus registered, assigned bus number 3 [ 0.897917] xhci_hcd 0000:00:14.0: hcc params 0x200077c1 hci version 0x100 quirks 0x0000000000009810 [ 0.898410] xhci_hcd 0000:00:14.0: xHCI Host Controller [ 0.898625] xhci_hcd 0000:00:14.0: new USB bus registered, assigned bus number 4 [ 0.898774] xhci_hcd 0000:00:14.0: Host supports USB 3.0 SuperSpeed [ 0.898981] usb usb3: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 6.01 [ 0.899129] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 0.899273] usb usb3: Product: xHCI Host Controller [ 0.899388] usb usb3: Manufacturer: Linux 6.1.95+ xhci-hcd [ 0.899510] usb usb3: SerialNumber: 0000:00:14.0 [ 0.899814] hub 3-0:1.0: USB hub found [ 0.899947] hub 3-0:1.0: 8 ports detected [ 0.901074] usb usb4: New USB device found, idVendor=1d6b, idProduct=0003, bcdDevice= 6.01 [ 0.901226] usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 0.901370] usb usb4: Product: xHCI Host Controller [ 0.901501] usb usb4: Manufacturer: Linux 6.1.95+ xhci-hcd [ 0.901633] usb usb4: SerialNumber: 0000:00:14.0 [ 0.901889] hub 4-0:1.0: USB hub found [ 0.902021] hub 4-0:1.0: 6 ports detected [ 0.903116] usbcore: registered new interface driver usblp [ 0.903252] usbcore: registered new interface driver usb-storage [ 0.903402] i8042: PNP: No PS/2 controller found. [ 0.903730] rtc_cmos 00:00: RTC can wake from S4 [ 0.904395] rtc_cmos 00:00: registered as rtc0 [ 0.904556] rtc_cmos 00:00: alarms up to one month, y3k, 114 bytes nvram [ 0.904805] device-mapper: uevent: version 1.0.3 [ 0.905021] xen: registering gsi 18 triggering 0 polarity 1 [ 0.905033] Already setup the GSI :18 [ 0.905034] device-mapper: ioctl: 4.47.0-ioctl (2022-07-28) initialised: dm-devel@redhat.com [ 0.905076] i801_smbus 0000:00:1f.3: SPD Write Disable is set [ 0.905161] intel_pstate: CPU model not supported [ 0.905193] i801_smbus 0000:00:1f.3: SMBus using PCI interrupt [ 0.905324] hid: raw HID events driver (C) Jiri Kosina [ 0.905778] Freeing initrd memory: 19884K [ 0.905920] usbcore: registered new interface driver usbhid [ 0.905919] i2c i2c-0: 1/4 memory slots populated (from DMI) [ 0.906161] usbhid: USB HID core driver [ 0.906728] Initializing XFRM netlink socket [ 0.906993] NET: Registered PF_INET6 protocol family [ 0.907582] Segment Routing with IPv6 [ 0.907746] In-situ OAM (IOAM) with IPv6 [ 0.907897] sit: IPv6, IPv4 and MPLS over IPv4 tunneling driver [ 0.908140] NET: Registered PF_PACKET protocol family [ 0.908294] 9pnet: Installing 9P2000 support [ 0.908421] Key type dns_resolver registered [ 0.909187] IPI shorthand broadcast: enabled [ 0.909327] sched_clock: Marking stable (871544131, 37601468)->(1756416703, -847271104) [ 0.909915] registered taskstats version 1 [ 0.910032] Loading compiled-in X.509 certificates [ 0.912578] PM: Magic number: 12:564:869 [ 0.912737] bdi 43:96: hash matches [ 0.912948] printk: console [netcon0] enabled [ 0.913063] netconsole: network logging started [ 0.913403] cfg80211: Loading compiled-in X.509 certificates for regulatory database [ 0.925317] cfg80211: Loaded X.509 cert 'sforshee: 00b28ddf47aef9cea7' [ 0.925698] cfg80211: Loaded X.509 cert 'wens: 61c038651aabdcf94bd0ac7ff06c7248db18c600' [ 0.926390] cfg80211: loaded regulatory.db is malformed or signature is missing/invalid [ 0.926567] ALSA device list: [ 0.926721] No soundcards found. [ 1.127759] usb 1-1: new high-speed USB device number 2 using ehci-pci [ 1.135659] usb 2-1: new high-speed USB device number 2 using ehci-pci [ 1.143659] usb 3-3: new high-speed USB device number 2 using xhci_hcd [ 1.180312] ata1: SATA link down (SStatus 0 SControl 300) [ 1.180578] ata6: SATA link down (SStatus 0 SControl 300) [ 1.180753] ata4: SATA link down (SStatus 0 SControl 300) [ 1.180907] ata2: SATA link down (SStatus 0 SControl 300) [ 1.181072] ata3: SATA link up 6.0 Gbps (SStatus 133 SControl 300) [ 1.181216] ata5: SATA link down (SStatus 0 SControl 300) [ 1.182364] ata3.00: ATA-10: HGST HUS722T1TALA604, RAGNWA05, max UDMA/133 [ 1.256016] usb 1-1: New USB device found, idVendor=8087, idProduct=8008, bcdDevice= 0.05 [ 1.256172] usb 1-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0 [ 1.256562] hub 1-1:1.0: USB hub found [ 1.256764] hub 1-1:1.0: 4 ports detected [ 1.264266] usb 2-1: New USB device found, idVendor=8087, idProduct=8000, bcdDevice= 0.05 [ 1.264421] usb 2-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0 [ 1.264807] hub 2-1:1.0: USB hub found [ 1.265016] hub 2-1:1.0: 4 ports detected [ 1.269121] ata3.00: 1953525168 sectors, multi 16: LBA48 NCQ (depth 32), AA [ 1.269251] ata3.00: Features: NCQ-sndrcv NCQ-prio [ 1.271460] usb 3-3: New USB device found, idVendor=05e3, idProduct=0610, bcdDevice=32.98 [ 1.271630] usb 3-3: New USB device strings: Mfr=0, Product=1, SerialNumber=0 [ 1.271754] usb 3-3: Product: USB2.0 Hub [ 1.272825] hub 3-3:1.0: USB hub found [ 1.273516] hub 3-3:1.0: 4 ports detected [ 1.296969] ata3.00: configured for UDMA/133 [ 1.297226] scsi 2:0:0:0: Direct-Access ATA HGST HUS722T1TAL WA05 PQ: 0 ANSI: 5 [ 1.297784] sd 2:0:0:0: Attached scsi generic sg0 type 0 [ 1.297892] sd 2:0:0:0: [sda] 1953525168 512-byte logical blocks: (1.00 TB/932 GiB) [ 1.298104] sd 2:0:0:0: [sda] Write Protect is off [ 1.298225] sd 2:0:0:0: [sda] Mode Sense: 00 3a 00 00 [ 1.298285] sd 2:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 1.298515] sd 2:0:0:0: [sda] Preferred minimum I/O size 512 bytes [ 1.318114] sda: sda1 sda2 < sda5 > [ 1.318671] sd 2:0:0:0: [sda] Attached SCSI disk [ 1.319922] Freeing unused kernel image (initmem) memory: 1576K [ 1.320049] Write protecting the kernel read-only data: 22528k [ 1.338407] Freeing unused kernel image (text/rodata gap) memory: 2032K [ 1.339748] Freeing unused kernel image (rodata/data gap) memory: 1568K [ 1.390661] usb 3-4: new high-speed USB device number 3 using xhci_hcd [ 1.516930] usb 3-4: New USB device found, idVendor=0557, idProduct=7000, bcdDevice= 0.00 [ 1.517086] usb 3-4: New USB device strings: Mfr=0, Product=0, SerialNumber=0 [ 1.517837] hub 3-4:1.0: USB hub found [ 1.518068] hub 3-4:1.0: 4 ports detected [ 1.580667] usb 3-3.2: new high-speed USB device number 4 using xhci_hcd [ 1.658223] usb 3-3.2: New USB device found, idVendor=05e3, idProduct=0610, bcdDevice=32.98 [ 1.658379] usb 3-3.2: New USB device strings: Mfr=0, Product=1, SerialNumber=0 [ 1.658524] usb 3-3.2: Product: USB2.0 Hub [ 1.659194] hub 3-3.2:1.0: USB hub found [ 1.659696] hub 3-3.2:1.0: 4 ports detected [ 1.809644] usb 3-4.1: new low-speed USB device number 5 using xhci_hcd [ 1.810339] x86/mm: Checked W+X mappings: passed, no W+X pages found. [ 1.810500] Run /init as init process [ 1.810625] with arguments: [ 1.810626] /init [ 1.810627] placeholder [ 1.810628] with environment: [ 1.810629] HOME=/ [ 1.810630] TERM=linux [ 1.916184] usb 3-4.1: New USB device found, idVendor=0557, idProduct=2419, bcdDevice= 1.00 [ 1.916346] usb 3-4.1: New USB device strings: Mfr=0, Product=0, SerialNumber=0 [ 1.922070] input: HID 0557:2419 as /devices/pci0000:00/0000:00:14.0/usb3/3-4/3-4.1/3-4.1:1.0/0003:0557:2419.0001/input/input2 [ 1.974935] hid-generic 0003:0557:2419.0001: input,hidraw0: USB HID v1.00 Keyboard [HID 0557:2419] on usb-0000:00:14.0-4.1/input0 [ 1.977830] input: HID 0557:2419 as /devices/pci0000:00/0000:00:14.0/usb3/3-4/3-4.1/3-4.1:1.1/0003:0557:2419.0002/input/input3 [ 1.978133] hid-generic 0003:0557:2419.0002: input,hidraw1: USB HID v1.00 Mouse [HID 0557:2419] on usb-0000:00:14.0-4.1/input1 [ 2.262246] ixgbe: Intel(R) 10 Gigabit PCI Express Network Driver [ 2.262404] ixgbe: Copyright (c) 1999-2016 Intel Corporation. [ 2.262863] ACPI Warning: \_SB.PCI0.BR2C._PRT: Return Package has no elements (empty) (20220331/nsprepkg-94) [ 2.263122] xen: registering gsi 16 triggering 0 polarity 1 [ 2.263132] Already setup the GSI :16 [ 2.266396] igb: Intel(R) Gigabit Ethernet Network Driver [ 2.266519] igb: Copyright (c) 2007-2014 Intel Corporation. [ 2.266748] xen: registering gsi 16 triggering 0 polarity 1 [ 2.266754] Already setup the GSI :16 [ 2.294106] pps pps0: new PPS source ptp0 [ 2.294286] igb 0000:07:00.0: added PHC on eth0 [ 2.294460] igb 0000:07:00.0: Intel(R) Gigabit Ethernet Network Connection [ 2.294581] igb 0000:07:00.0: eth0: (PCIe:2.5Gb/s:Width x1) 0c:c4:7a:9f:87:be [ 2.294758] igb 0000:07:00.0: eth0: PBA No: 010C00-000 [ 2.294874] igb 0000:07:00.0: Using MSI-X interrupts. 4 rx queue(s), 4 tx queue(s) [ 2.295107] xen: registering gsi 17 triggering 0 polarity 1 [ 2.295115] Already setup the GSI :17 [ 2.324662] pps pps1: new PPS source ptp1 [ 2.324848] igb 0000:08:00.0: added PHC on eth1 [ 2.325021] igb 0000:08:00.0: Intel(R) Gigabit Ethernet Network Connection [ 2.325142] igb 0000:08:00.0: eth1: (PCIe:2.5Gb/s:Width x1) 0c:c4:7a:9f:87:bf [ 2.325308] igb 0000:08:00.0: eth1: PBA No: 010000-000 [ 2.325425] igb 0000:08:00.0: Using MSI-X interrupts. 4 rx queue(s), 4 tx queue(s) [ 2.325681] xen: registering gsi 16 triggering 0 polarity 1 [ 2.325688] Already setup the GSI :16 [ 2.383671] igb 0000:0b:00.0: added PHC on eth2 [ 2.383811] igb 0000:0b:00.0: Intel(R) Gigabit Ethernet Network Connection [ 2.383932] igb 0000:0b:00.0: eth2: (PCIe:5.0Gb/s:Width x4) 0c:c4:7a:9f:87:c0 [ 2.384136] igb 0000:0b:00.0: eth2: PBA No: 010000-000 [ 2.384252] igb 0000:0b:00.0: Using MSI-X interrupts. 8 rx queue(s), 8 tx queue(s) [ 2.384471] xen: registering gsi 17 triggering 0 polarity 1 [ 2.384478] Already setup the GSI :17 [ 2.442565] igb 0000:0b:00.1: added PHC on eth3 [ 2.442721] igb 0000:0b:00.1: Intel(R) Gigabit Ethernet Network Connection [ 2.442852] igb 0000:0b:00.1: eth3: (PCIe:5.0Gb/s:Width x4) 0c:c4:7a:9f:87:c1 [ 2.443056] igb 0000:0b:00.1: eth3: PBA No: 010000-000 [ 2.443172] igb 0000:0b:00.1: Using MSI-X interrupts. 8 rx queue(s), 8 tx queue(s) [ 2.443415] xen: registering gsi 18 triggering 0 polarity 1 [ 2.443425] Already setup the GSI :18 [ 2.501491] igb 0000:0b:00.2: added PHC on eth4 [ 2.501664] igb 0000:0b:00.2: Intel(R) Gigabit Ethernet Network Connection [ 2.501789] igb 0000:0b:00.2: eth4: (PCIe:5.0Gb/s:Width x4) 0c:c4:7a:9f:87:c2 [ 2.501992] igb 0000:0b:00.2: eth4: PBA No: 010000-000 [ 2.502108] igb 0000:0b:00.2: Using MSI-X interrupts. 8 rx queue(s), 8 tx queue(s) [ 2.502362] xen: registering gsi 19 triggering 0 polarity 1 [ 2.502371] Already setup the GSI :19 [ 2.558995] igb 0000:0b:00.3: added PHC on eth5 [ 2.559133] igb 0000:0b:00.3: Intel(R) Gigabit Ethernet Network Connection [ 2.559261] igb 0000:0b:00.3: eth5: (PCIe:5.0Gb/s:Width x4) 0c:c4:7a:9f:87:c3 [ 2.559472] igb 0000:0b:00.3: eth5: PBA No: 010000-000 [ 2.559588] igb 0000:0b:00.3: Using MSI-X interrupts. 8 rx queue(s), 8 tx queue(s) [ 2.561983] igb 0000:08:00.0 enx0cc47a9f87bf: renamed from eth1 [ 2.574193] igb 0000:0b:00.1 enx0cc47a9f87c1: renamed from eth3 [ 2.582779] igb 0000:07:00.0 enx0cc47a9f87be: renamed from eth0 [ 2.589969] igb 0000:0b:00.2 enx0cc47a9f87c2: renamed from eth4 [ 2.602853] igb 0000:0b:00.0 enx0cc47a9f87c0: renamed from eth2 [ 2.614077] igb 0000:0b:00.3 enx0cc47a9f87c3: renamed from eth5 [ 2.997841] ixgbe 0000:04:00.0: Multiqueue Enabled: Rx Queue count = 8, Tx Queue count = 8 XDP Queue count = 0 [ 3.127636] ixgbe 0000:04:00.0: MAC: 5, PHY: 0, PBA No: 020B00-000 [ 3.127924] ixgbe 0000:04:00.0: 0c:c4:7a:9f:8f:b6 [ 3.419829] ixgbe 0000:04:00.0: Intel(R) 10 Gigabit Network Connection [ 3.420152] ACPI Warning: \_SB.PCI0.BR2C._PRT: Return Package has no elements (empty) (20220331/nsprepkg-94) [ 3.420373] xen: registering gsi 17 triggering 0 polarity 1 [ 3.420384] Already setup the GSI :17 [ 4.160102] ixgbe 0000:04:00.1: Multiqueue Enabled: Rx Queue count = 8, Tx Queue count = 8 XDP Queue count = 0 [ 4.289982] ixgbe 0000:04:00.1: MAC: 5, PHY: 0, PBA No: 020B00-000 [ 4.290142] ixgbe 0000:04:00.1: 0c:c4:7a:9f:8f:b7 [ 4.579474] ixgbe 0000:04:00.1: Intel(R) 10 Gigabit Network Connection [ 4.581734] ixgbe 0000:04:00.1 enx0cc47a9f8fb7: renamed from eth1 [ 4.592189] ixgbe 0000:04:00.0 enx0cc47a9f8fb6: renamed from eth0 [ 5.000617] EXT4-fs (dm-0): mounting ext3 file system using the ext4 subsystem [ 5.008875] EXT4-fs (dm-0): mounted filesystem with ordered data mode. Quota mode: none. [ 8.728716] EXT4-fs (dm-0): re-mounted. Quota mode: none. [ 9.856334] EXT4-fs (sda1): mounting ext3 file system using the ext4 subsystem [ 9.880027] EXT4-fs (sda1): mounted filesystem with ordered data mode. Quota mode: none. [ 9.966667] Adding 1949692k swap on /dev/mapper/debina0--vg-swap_1. Priority:-2 extents:1 across:1949692k [ 11.480552] xenbr0: port 1(enx0cc47a9f87be) entered blocking state [ 11.480779] xenbr0: port 1(enx0cc47a9f87be) entered disabled state [ 11.480956] device enx0cc47a9f87be entered promiscuous mode [ 15.010237] igb 0000:07:00.0 enx0cc47a9f87be: igb: enx0cc47a9f87be NIC Link is Up 1000 Mbps Full Duplex, Flow Control: RX [ 15.221955] IPv6: ADDRCONF(NETDEV_CHANGE): enx0cc47a9f87be: link becomes ready [ 15.222253] xenbr0: port 1(enx0cc47a9f87be) entered blocking state [ 15.222377] xenbr0: port 1(enx0cc47a9f87be) entered forwarding state [ 15.222671] IPv6: ADDRCONF(NETDEV_CHANGE): xenbr0: link becomes ready