[ 0.000000] microcode: microcode updated early to revision 0x42e, date = 2019-03-14 [ 0.000000] Linux version 6.1.0-21-amd64 (debian-kernel@lists.debian.org) (gcc-12 (Debian 12.2.0-14) 12.2.0, GNU ld (GNU Binutils for Debian) 2.40) #1 SMP PREEMPT_DYNAMIC Debian 6.1.90-1 (2024-05-03) [ 0.000000] Command line: BOOT_IMAGE=/vmlinuz-6.1.0-21-amd64 root=/dev/mapper/fiano1--vg-root ro console=ttyS0,115200n8 [ 0.000000] BIOS-provided physical RAM map: [ 0.000000] BIOS-e820: [mem 0x0000000000000000-0x000000000009abff] usable [ 0.000000] BIOS-e820: [mem 0x000000000009ac00-0x000000000009ffff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000000e0000-0x00000000000fffff] reserved [ 0.000000] BIOS-e820: [mem 0x0000000000100000-0x000000007de2bfff] usable [ 0.000000] BIOS-e820: [mem 0x000000007de2c000-0x000000007debafff] reserved [ 0.000000] BIOS-e820: [mem 0x000000007debb000-0x000000007dfc3fff] ACPI data [ 0.000000] BIOS-e820: [mem 0x000000007dfc4000-0x000000007e1e0fff] ACPI NVS [ 0.000000] BIOS-e820: [mem 0x000000007e1e1000-0x000000007f36afff] reserved [ 0.000000] BIOS-e820: [mem 0x000000007f36b000-0x000000007f7fffff] ACPI NVS [ 0.000000] BIOS-e820: [mem 0x0000000080000000-0x000000008fffffff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000fed1c000-0x00000000fed3ffff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000ff000000-0x00000000ffffffff] reserved [ 0.000000] BIOS-e820: [mem 0x0000000100000000-0x000000027fffffff] usable [ 0.000000] NX (Execute Disable) protection: active [ 0.000000] SMBIOS 2.7 present. [ 0.000000] DMI: Supermicro X9DBL-3F/X9DBL-iF/X9DBL-3F/X9DBL-iF, BIOS 3.00 12/06/2013 [ 0.000000] tsc: Fast TSC calibration using PIT [ 0.000000] tsc: Detected 1799.830 MHz processor [ 0.000873] e820: update [mem 0x00000000-0x00000fff] usable ==> reserved [ 0.000878] e820: remove [mem 0x000a0000-0x000fffff] usable [ 0.000888] last_pfn = 0x280000 max_arch_pfn = 0x400000000 [ 0.001029] x86/PAT: Configuration [0-7]: WB WC UC- UC WB WP UC- WT [ 0.001680] e820: update [mem 0x80000000-0xffffffff] usable ==> reserved [ 0.001689] last_pfn = 0x7de2c max_arch_pfn = 0x400000000 [ 0.018714] found SMP MP-table at [mem 0x000fd8e0-0x000fd8ef] [ 0.018739] Using GB pages for direct mapping [ 0.019105] RAMDISK: [mem 0x3329b000-0x35944fff] [ 0.019113] ACPI: Early table checksum verification disabled [ 0.019117] ACPI: RSDP 0x00000000000F04A0 000024 (v02 SUPERM) [ 0.019124] ACPI: XSDT 0x000000007DEF1088 00008C (v01 SUPERM SMCI--MB 00000001 AMI 00010013) [ 0.019133] ACPI: FACP 0x000000007DEFBAB0 0000F4 (v04 SUPERM SMCI--MB 00000001 AMI 00010013) [ 0.019141] ACPI: DSDT 0x000000007DEF11A0 00A910 (v02 SUPERM SMCI--MB 00000000 INTL 20091112) [ 0.019146] ACPI: FACS 0x000000007E1D8080 000040 [ 0.019151] ACPI: APIC 0x000000007DEFBBA8 000090 (v03 00000001 AMI 00010013) [ 0.019156] ACPI: FPDT 0x000000007DEFBC38 000044 (v01 00000001 AMI 00010013) [ 0.019161] ACPI: HPET 0x000000007DEFBC80 000038 (v01 SUPERM SMCI--MB 00000001 AMI. 00000005) [ 0.019166] ACPI: PRAD 0x000000007DEFBCB8 0000BE (v02 PRADID PRADTID 00000001 MSFT 04000000) [ 0.019171] ACPI: SPMI 0x000000007DEFBD78 000040 (v05 A M I OEMSPMI 00000000 AMI. 00000000) [ 0.019176] ACPI: SSDT 0x000000007DEFBDB8 0C7AE8 (v02 INTEL CpuPm 00004000 INTL 20091112) [ 0.019181] ACPI: EINJ 0x000000007DFC38A0 000130 (v01 AMI AMI EINJ 00000000 00000000) [ 0.019187] ACPI: ERST 0x000000007DFC39D0 000230 (v01 AMIER AMI ERST 00000000 00000000) [ 0.019192] ACPI: HEST 0x000000007DFC3C00 0000A8 (v01 AMI AMI HEST 00000000 00000000) [ 0.019197] ACPI: BERT 0x000000007DFC3CA8 000030 (v01 AMI AMI BERT 00000000 00000000) [ 0.019202] ACPI: DMAR 0x000000007DFC3CD8 0000B4 (v01 A M I OEMDMAR 00000001 INTL 00000001) [ 0.019207] ACPI: MCFG 0x000000007DFC3D90 00003C (v01 SUPERM SMCI--MB 00000001 MSFT 00000097) [ 0.019211] ACPI: Reserving FACP table memory at [mem 0x7defbab0-0x7defbba3] [ 0.019213] ACPI: Reserving DSDT table memory at [mem 0x7def11a0-0x7defbaaf] [ 0.019215] ACPI: Reserving FACS table memory at [mem 0x7e1d8080-0x7e1d80bf] [ 0.019216] ACPI: Reserving APIC table memory at [mem 0x7defbba8-0x7defbc37] [ 0.019218] ACPI: Reserving FPDT table memory at [mem 0x7defbc38-0x7defbc7b] [ 0.019219] ACPI: Reserving HPET table memory at [mem 0x7defbc80-0x7defbcb7] [ 0.019220] ACPI: Reserving PRAD table memory at [mem 0x7defbcb8-0x7defbd75] [ 0.019222] ACPI: Reserving SPMI table memory at [mem 0x7defbd78-0x7defbdb7] [ 0.019223] ACPI: Reserving SSDT table memory at [mem 0x7defbdb8-0x7dfc389f] [ 0.019224] ACPI: Reserving EINJ table memory at [mem 0x7dfc38a0-0x7dfc39cf] [ 0.019226] ACPI: Reserving ERST table memory at [mem 0x7dfc39d0-0x7dfc3bff] [ 0.019227] ACPI: Reserving HEST table memory at [mem 0x7dfc3c00-0x7dfc3ca7] [ 0.019229] ACPI: Reserving BERT table memory at [mem 0x7dfc3ca8-0x7dfc3cd7] [ 0.019230] ACPI: Reserving DMAR table memory at [mem 0x7dfc3cd8-0x7dfc3d8b] [ 0.019231] ACPI: Reserving MCFG table memory at [mem 0x7dfc3d90-0x7dfc3dcb] [ 0.019301] No NUMA configuration found [ 0.019302] Faking a node at [mem 0x0000000000000000-0x000000027fffffff] [ 0.019319] NODE_DATA(0) allocated [mem 0x27ffd3000-0x27fffdfff] [ 0.019788] Zone ranges: [ 0.019789] DMA [mem 0x0000000000001000-0x0000000000ffffff] [ 0.019792] DMA32 [mem 0x0000000001000000-0x00000000ffffffff] [ 0.019795] Normal [mem 0x0000000100000000-0x000000027fffffff] [ 0.019797] Device empty [ 0.019798] Movable zone start for each node [ 0.019803] Early memory node ranges [ 0.019804] node 0: [mem 0x0000000000001000-0x0000000000099fff] [ 0.019806] node 0: [mem 0x0000000000100000-0x000000007de2bfff] [ 0.019808] node 0: [mem 0x0000000100000000-0x000000027fffffff] [ 0.019811] Initmem setup node 0 [mem 0x0000000000001000-0x000000027fffffff] [ 0.019819] On node 0, zone DMA: 1 pages in unavailable ranges [ 0.019876] On node 0, zone DMA: 102 pages in unavailable ranges [ 0.027991] On node 0, zone Normal: 8660 pages in unavailable ranges [ 0.028286] ACPI: PM-Timer IO Port: 0x408 [ 0.028298] ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1]) [ 0.028300] ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1]) [ 0.028301] ACPI: LAPIC_NMI (acpi_id[0x02] high edge lint[0x1]) [ 0.028303] ACPI: LAPIC_NMI (acpi_id[0x03] high edge lint[0x1]) [ 0.028315] IOAPIC[0]: apic_id 0, version 32, address 0xfec00000, GSI 0-23 [ 0.028321] IOAPIC[1]: apic_id 2, version 32, address 0xfec01000, GSI 24-47 [ 0.028325] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl) [ 0.028328] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level) [ 0.028335] ACPI: Using ACPI (MADT) for SMP configuration information [ 0.028337] ACPI: HPET id: 0x8086a701 base: 0xfed00000 [ 0.028343] TSC deadline timer available [ 0.028345] smpboot: Allowing 4 CPUs, 0 hotplug CPUs [ 0.028366] PM: hibernation: Registered nosave memory: [mem 0x00000000-0x00000fff] [ 0.028370] PM: hibernation: Registered nosave memory: [mem 0x0009a000-0x0009afff] [ 0.028371] PM: hibernation: Registered nosave memory: [mem 0x0009b000-0x0009ffff] [ 0.028372] PM: hibernation: Registered nosave memory: [mem 0x000a0000-0x000dffff] [ 0.028374] PM: hibernation: Registered nosave memory: [mem 0x000e0000-0x000fffff] [ 0.028376] PM: hibernation: Registered nosave memory: [mem 0x7de2c000-0x7debafff] [ 0.028377] PM: hibernation: Registered nosave memory: [mem 0x7debb000-0x7dfc3fff] [ 0.028379] PM: hibernation: Registered nosave memory: [mem 0x7dfc4000-0x7e1e0fff] [ 0.028380] PM: hibernation: Registered nosave memory: [mem 0x7e1e1000-0x7f36afff] [ 0.028381] PM: hibernation: Registered nosave memory: [mem 0x7f36b000-0x7f7fffff] [ 0.028382] PM: hibernation: Registered nosave memory: [mem 0x7f800000-0x7fffffff] [ 0.028384] PM: hibernation: Registered nosave memory: [mem 0x80000000-0x8fffffff] [ 0.028385] PM: hibernation: Registered nosave memory: [mem 0x90000000-0xfed1bfff] [ 0.028386] PM: hibernation: Registered nosave memory: [mem 0xfed1c000-0xfed3ffff] [ 0.028387] PM: hibernation: Registered nosave memory: [mem 0xfed40000-0xfeffffff] [ 0.028388] PM: hibernation: Registered nosave memory: [mem 0xff000000-0xffffffff] [ 0.028391] [mem 0x90000000-0xfed1bfff] available for PCI devices [ 0.028393] Booting paravirtualized kernel on bare hardware [ 0.028396] clocksource: refined-jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645519600211568 ns [ 0.035847] setup_percpu: NR_CPUS:8192 nr_cpumask_bits:4 nr_cpu_ids:4 nr_node_ids:1 [ 0.036246] percpu: Embedded 61 pages/cpu s212992 r8192 d28672 u524288 [ 0.036255] pcpu-alloc: s212992 r8192 d28672 u524288 alloc=1*2097152 [ 0.036259] pcpu-alloc: [0] 0 1 2 3 [ 0.036300] Fallback order for Node 0: 0 [ 0.036304] Built 1 zonelists, mobility grouping on. Total pages: 2055603 [ 0.036307] Policy zone: Normal [ 0.036308] Kernel command line: BOOT_IMAGE=/vmlinuz-6.1.0-21-amd64 root=/dev/mapper/fiano1--vg-root ro console=ttyS0,115200n8 [ 0.036378] Unknown kernel command line parameters "BOOT_IMAGE=/vmlinuz-6.1.0-21-amd64", will be passed to user space. [ 0.036392] random: crng init done [ 0.037441] Dentry cache hash table entries: 1048576 (order: 11, 8388608 bytes, linear) [ 0.038008] Inode-cache hash table entries: 524288 (order: 10, 4194304 bytes, linear) [ 0.038096] mem auto-init: stack:all(zero), heap alloc:on, heap free:off [ 0.038109] software IO TLB: area num 4. [ 0.079182] Memory: 2033856K/8353556K available (14342K kernel code, 2332K rwdata, 9060K rodata, 2796K init, 17404K bss, 304412K reserved, 0K cma-reserved) [ 0.079395] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1 [ 0.079416] Kernel/User page tables isolation: enabled [ 0.079470] ftrace: allocating 40220 entries in 158 pages [ 0.089825] ftrace: allocated 158 pages with 5 groups [ 0.090774] Dynamic Preempt: voluntary [ 0.090818] rcu: Preemptible hierarchical RCU implementation. [ 0.090819] rcu: RCU restricting CPUs from NR_CPUS=8192 to nr_cpu_ids=4. [ 0.090821] Trampoline variant of Tasks RCU enabled. [ 0.090822] Rude variant of Tasks RCU enabled. [ 0.090822] Tracing variant of Tasks RCU enabled. [ 0.090823] rcu: RCU calculated value of scheduler-enlistment delay is 25 jiffies. [ 0.090824] rcu: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=4 [ 0.098161] NR_IRQS: 524544, nr_irqs: 864, preallocated irqs: 16 [ 0.098360] rcu: srcu_init: Setting srcu_struct sizes based on contention. [ 0.102922] Console: colour VGA+ 80x25 [ 1.027389] printk: console [ttyS0] enabled [ 1.031596] ACPI: Core revision 20220331 [ 1.036252] clocksource: hpet: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 133484882848 ns [ 1.045387] APIC: Switch to symmetric I/O mode setup [ 1.050368] DMAR: Host address width 46 [ 1.054217] DMAR: DRHD base: 0x000000fbffc000 flags: 0x1 [ 1.059546] DMAR: dmar0: reg_base_addr fbffc000 ver 1:0 cap d2078c106f0466 ecap f020de [ 1.067469] DMAR: RMRR base: 0x0000007de91000 end: 0x0000007de9dfff [ 1.073744] DMAR: ATSR flags: 0x0 [ 1.077063] DMAR: RHSA base: 0x000000fbffc000 proximity domain: 0x0 [ 1.083340] DMAR-IR: IOAPIC id 0 under DRHD base 0xfbffc000 IOMMU 0 [ 1.089700] DMAR-IR: IOAPIC id 2 under DRHD base 0xfbffc000 IOMMU 0 [ 1.096062] DMAR-IR: HPET id 0 under DRHD base 0xfbffc000 [ 1.101469] DMAR-IR: Queued invalidation will be enabled to support x2apic and Intr-remapping. [ 1.110599] DMAR-IR: Enabled IRQ remapping in x2apic mode [ 1.115997] x2apic enabled [ 1.118718] Switched APIC routing to cluster x2apic. [ 1.124226] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1 [ 1.149396] clocksource: tsc-early: mask: 0xffffffffffffffff max_cycles: 0x19f188eef05, max_idle_ns: 440795217443 ns [ 1.159914] Calibrating delay loop (skipped), value calculated using timer frequency.. 3599.66 BogoMIPS (lpj=7199320) [ 1.163944] CPU0: Thermal monitoring enabled (TM1) [ 1.167997] process: using mwait in idle threads [ 1.171914] Last level iTLB entries: 4KB 512, 2MB 8, 4MB 8 [ 1.175911] Last level dTLB entries: 4KB 512, 2MB 0, 4MB 0, 1GB 4 [ 1.179914] Spectre V1 : Mitigation: usercopy/swapgs barriers and __user pointer sanitization [ 1.183913] Spectre V2 : Mitigation: Retpolines [ 1.187911] Spectre V2 : Spectre v2 / SpectreRSB mitigation: Filling RSB on context switch [ 1.191911] Spectre V2 : Spectre v2 / SpectreRSB : Filling RSB on VMEXIT [ 1.195911] Spectre V2 : Enabling Restricted Speculation for firmware calls [ 1.199912] Spectre V2 : mitigation: Enabling conditional Indirect Branch Prediction Barrier [ 1.203912] Speculative Store Bypass: Mitigation: Speculative Store Bypass disabled via prctl [ 1.207912] MDS: Mitigation: Clear CPU buffers [ 1.211911] MMIO Stale Data: Unknown: No mitigations [ 1.215916] x86/fpu: Supporting XSAVE feature 0x001: 'x87 floating point registers' [ 1.219911] x86/fpu: Supporting XSAVE feature 0x002: 'SSE registers' [ 1.223911] x86/fpu: Supporting XSAVE feature 0x004: 'AVX registers' [ 1.227912] x86/fpu: xstate_offset[2]: 576, xstate_sizes[2]: 256 [ 1.231911] x86/fpu: Enabled xstate features 0x7, context size is 832 bytes, using 'standard' format. [ 1.260745] Freeing SMP alternatives memory: 36K [ 1.263912] pid_max: default: 32768 minimum: 301 [ 1.267944] LSM: Security Framework initializing [ 1.271929] landlock: Up and running. [ 1.275911] Yama: disabled by default; enable with sysctl kernel.yama.* [ 1.279943] AppArmor: AppArmor initialized [ 1.283913] TOMOYO Linux initialized [ 1.287918] LSM support for eBPF active [ 1.291958] Mount-cache hash table entries: 16384 (order: 5, 131072 bytes, linear) [ 1.295927] Mountpoint-cache hash table entries: 16384 (order: 5, 131072 bytes, linear) [ 1.300534] smpboot: CPU0: Intel(R) Xeon(R) CPU E5-2403 v2 @ 1.80GHz (family: 0x6, model: 0x3e, stepping: 0x4) [ 1.304101] cblist_init_generic: Setting adjustable number of callback queues. [ 1.307912] cblist_init_generic: Setting shift to 2 and lim to 1. [ 1.311943] cblist_init_generic: Setting adjustable number of callback queues. [ 1.315912] cblist_init_generic: Setting shift to 2 and lim to 1. [ 1.319933] cblist_init_generic: Setting adjustable number of callback queues. [ 1.323912] cblist_init_generic: Setting shift to 2 and lim to 1. [ 1.327933] Performance Events: PEBS fmt1+, IvyBridge events, 16-deep LBR, full-width counters, Intel PMU driver. [ 1.331913] ... version: 3 [ 1.335911] ... bit width: 48 [ 1.339911] ... generic registers: 8 [ 1.343911] ... value mask: 0000ffffffffffff [ 1.347911] ... max period: 00007fffffffffff [ 1.351911] ... fixed-purpose events: 3 [ 1.355911] ... event mask: 00000007000000ff [ 1.360144] signal: max sigframe size: 1776 [ 1.363936] Estimated ratio of average max frequency by base frequency (times 1024): 1024 [ 1.367944] rcu: Hierarchical SRCU implementation. [ 1.371912] rcu: Max phase no-delay instances is 1000. [ 1.376590] NMI watchdog: Enabled. Permanently consumes one hw-PMU counter. [ 1.380008] smp: Bringing up secondary CPUs ... [ 1.384059] x86: Booting SMP configuration: [ 1.387917] .... node #0, CPUs: #1 #2 #3 [ 1.403073] smp: Brought up 1 node, 4 CPUs [ 1.407912] smpboot: Max logical packages: 1 [ 1.411912] smpboot: Total of 4 processors activated (14398.64 BogoMIPS) [ 1.436040] node 0 deferred pages initialised in 20ms [ 1.440354] devtmpfs: initialized [ 1.443994] x86/mm: Memory block size: 128MB [ 1.448964] ACPI: PM: Registering ACPI NVS region [mem 0x7dfc4000-0x7e1e0fff] (2215936 bytes) [ 1.451963] ACPI: PM: Registering ACPI NVS region [mem 0x7f36b000-0x7f7fffff] (4804608 bytes) [ 1.456067] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645041785100000 ns [ 1.459925] futex hash table entries: 1024 (order: 4, 65536 bytes, linear) [ 1.463975] pinctrl core: initialized pinctrl subsystem [ 1.468791] NET: Registered PF_NETLINK/PF_ROUTE protocol family [ 1.472192] DMA: preallocated 1024 KiB GFP_KERNEL pool for atomic allocations [ 1.476072] DMA: preallocated 1024 KiB GFP_KERNEL|GFP_DMA pool for atomic allocations [ 1.480070] DMA: preallocated 1024 KiB GFP_KERNEL|GFP_DMA32 pool for atomic allocations [ 1.483922] audit: initializing netlink subsys (disabled) [ 1.487926] audit: type=2000 audit(1719217117.400:1): state=initialized audit_enabled=0 res=1 [ 1.488064] thermal_sys: Registered thermal governor 'fair_share' [ 1.491915] thermal_sys: Registered thermal governor 'bang_bang' [ 1.495912] thermal_sys: Registered thermal governor 'step_wise' [ 1.499911] thermal_sys: Registered thermal governor 'user_space' [ 1.503911] thermal_sys: Registered thermal governor 'power_allocator' [ 1.507929] cpuidle: using governor ladder [ 1.515916] cpuidle: using governor menu [ 1.519887] ACPI FADT declares the system doesn't support PCIe ASPM, so disable it [ 1.519913] acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5 [ 1.524014] PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0x80000000-0x8fffffff] (base 0x80000000) [ 1.527914] PCI: MMCONFIG at [mem 0x80000000-0x8fffffff] reserved in E820 [ 1.531921] pmd_set_huge: Cannot satisfy [mem 0x80000000-0x80200000] with a huge-page mapping due to MTRR override. [ 1.536333] PCI: Using configuration type 1 for base access [ 1.540009] core: PMU erratum BJ122, BV98, HSD29 workaround disabled, HT off [ 1.545252] kprobes: kprobe jump-optimization is enabled. All kprobes are optimized if possible. [ 1.547972] HugeTLB: registered 1.00 GiB page size, pre-allocated 0 pages [ 1.551914] HugeTLB: 16380 KiB vmemmap can be freed for a 1.00 GiB page [ 1.559912] HugeTLB: registered 2.00 MiB page size, pre-allocated 0 pages [ 1.567911] HugeTLB: 28 KiB vmemmap can be freed for a 2.00 MiB page [ 1.572071] ACPI: Added _OSI(Module Device) [ 1.575915] ACPI: Added _OSI(Processor Device) [ 1.579912] ACPI: Added _OSI(3.0 _SCP Extensions) [ 1.587912] ACPI: Added _OSI(Processor Aggregator Device) [ 1.706975] ACPI: 2 ACPI AML tables successfully acquired and loaded [ 1.737498] ACPI: Interpreter enabled [ 1.739934] ACPI: PM: (supports S0 S1 S4 S5) [ 1.743912] ACPI: Using IOAPIC for interrupt routing [ 1.752019] HEST: Table parsing has been initialized. [ 1.756034] GHES: APEI firmware first mode is enabled by WHEA _OSC. [ 1.759916] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug [ 1.771911] PCI: Using E820 reservations for host bridge windows [ 1.776467] ACPI: Enabled 5 GPEs in block 00 to 3F [ 1.784022] ACPI BIOS Error (bug): Could not resolve symbol [\_SB.PRAD], AE_NOT_FOUND (20220331/psargs-330) [ 1.787915] ACPI Error: Aborting method \_GPE._L24 due to previous error (AE_NOT_FOUND) (20220331/psparse-529) [ 1.791920] ACPI Error: AE_NOT_FOUND, while evaluating GPE method [_L24] (20220331/evgpe-511) [ 1.795910] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-fe]) [ 1.799910] acpi PNP0A08:00: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI HPX-Type3] [ 1.808006] acpi PNP0A08:00: _OSC: platform does not support [SHPCHotplug PME AER LTR] [ 1.816068] acpi PNP0A08:00: _OSC: OS now controls [PCIeHotplug PCIeCapability] [ 1.823912] acpi PNP0A08:00: FADT indicates ASPM is unsupported, using BIOS configuration [ 1.832273] PCI host bridge to bus 0000:00 [ 1.835914] pci_bus 0000:00: root bus resource [io 0x0000-0x03af window] [ 1.843912] pci_bus 0000:00: root bus resource [io 0x03e0-0x0cf7 window] [ 1.851912] pci_bus 0000:00: root bus resource [io 0x03b0-0x03df window] [ 1.855912] pci_bus 0000:00: root bus resource [io 0x0d00-0xffff window] [ 1.863912] pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000dffff window] [ 1.871912] pci_bus 0000:00: root bus resource [mem 0xfed08000-0xfed08fff window] [ 1.879912] pci_bus 0000:00: root bus resource [mem 0xfed0e000-0xfed0ffff window] [ 1.887912] pci_bus 0000:00: root bus resource [mem 0x80000000-0xfbffffff window] [ 1.895912] pci_bus 0000:00: root bus resource [bus 00-fe] [ 1.899943] pci 0000:00:00.0: [8086:0e00] type 00 class 0x060000 [ 1.903995] pci 0000:00:00.0: PME# supported from D0 D3hot D3cold [ 1.912037] pci 0000:00:01.0: [8086:0e02] type 01 class 0x060400 [ 1.920012] pci 0000:00:01.0: PME# supported from D0 D3hot D3cold [ 1.924080] pci 0000:00:01.1: [8086:0e03] type 01 class 0x060400 [ 1.932010] pci 0000:00:01.1: PME# supported from D0 D3hot D3cold [ 1.936080] pci 0000:00:03.0: [8086:0e08] type 01 class 0x060400 [ 1.943950] pci 0000:00:03.0: enabling Extended Tags [ 1.947976] pci 0000:00:03.0: PME# supported from D0 D3hot D3cold [ 1.956065] pci 0000:00:04.0: [8086:0e20] type 00 class 0x088000 [ 1.959929] pci 0000:00:04.0: reg 0x10: [mem 0xfbb1c000-0xfbb1ffff 64bit] [ 1.968057] pci 0000:00:04.1: [8086:0e21] type 00 class 0x088000 [ 1.971928] pci 0000:00:04.1: reg 0x10: [mem 0xfbb18000-0xfbb1bfff 64bit] [ 1.980049] pci 0000:00:04.2: [8086:0e22] type 00 class 0x088000 [ 1.987928] pci 0000:00:04.2: reg 0x10: [mem 0xfbb14000-0xfbb17fff 64bit] [ 1.992046] pci 0000:00:04.3: [8086:0e23] type 00 class 0x088000 [ 1.999928] pci 0000:00:04.3: reg 0x10: [mem 0xfbb10000-0xfbb13fff 64bit] [ 2.004048] pci 0000:00:04.4: [8086:0e24] type 00 class 0x088000 [ 2.011928] pci 0000:00:04.4: reg 0x10: [mem 0xfbb0c000-0xfbb0ffff 64bit] [ 2.020046] pci 0000:00:04.5: [8086:0e25] type 00 class 0x088000 [ 2.023928] pci 0000:00:04.5: reg 0x10: [mem 0xfbb08000-0xfbb0bfff 64bit] [ 2.032047] pci 0000:00:04.6: [8086:0e26] type 00 class 0x088000 [ 2.035931] pci 0000:00:04.6: reg 0x10: [mem 0xfbb04000-0xfbb07fff 64bit] [ 2.044047] pci 0000:00:04.7: [8086:0e27] type 00 class 0x088000 [ 2.051928] pci 0000:00:04.7: reg 0x10: [mem 0xfbb00000-0xfbb03fff 64bit] [ 2.056046] pci 0000:00:05.0: [8086:0e28] type 00 class 0x088000 [ 2.064042] pci 0000:00:05.2: [8086:0e2a] type 00 class 0x088000 [ 2.068035] pci 0000:00:05.4: [8086:0e2c] type 00 class 0x080020 [ 2.075923] pci 0000:00:05.4: reg 0x10: [mem 0xfbb25000-0xfbb25fff] [ 2.084062] pci 0000:00:11.0: [8086:1d3e] type 01 class 0x060400 [ 2.088032] pci 0000:00:11.0: PME# supported from D0 D3hot D3cold [ 2.096056] pci 0000:00:16.0: [8086:1d3a] type 00 class 0x078000 [ 2.099932] pci 0000:00:16.0: reg 0x10: [mem 0xfed0e000-0xfed0e00f 64bit] [ 2.107986] pci 0000:00:16.0: PME# supported from D0 D3hot D3cold [ 2.112004] pci 0000:00:16.1: [8086:1d3b] type 00 class 0x078000 [ 2.119931] pci 0000:00:16.1: reg 0x10: [mem 0xfed0f000-0xfed0f00f 64bit] [ 2.127986] pci 0000:00:16.1: PME# supported from D0 D3hot D3cold [ 2.132016] pci 0000:00:1a.0: [8086:1d2d] type 00 class 0x0c0320 [ 2.139928] pci 0000:00:1a.0: reg 0x10: [mem 0xfbb23000-0xfbb233ff] [ 2.144002] pci 0000:00:1a.0: PME# supported from D0 D3hot D3cold [ 2.152017] pci 0000:00:1c.0: [8086:1d10] type 01 class 0x060400 [ 2.156011] pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold [ 2.163942] pci 0000:00:1c.0: Enabling MPC IRBNCE [ 2.167913] pci 0000:00:1c.0: Intel PCH root port ACS workaround enabled [ 2.176029] pci 0000:00:1c.1: [8086:1d12] type 01 class 0x060400 [ 2.180011] pci 0000:00:1c.1: PME# supported from D0 D3hot D3cold [ 2.187938] pci 0000:00:1c.1: Enabling MPC IRBNCE [ 2.191913] pci 0000:00:1c.1: Intel PCH root port ACS workaround enabled [ 2.200029] pci 0000:00:1d.0: [8086:1d26] type 00 class 0x0c0320 [ 2.203928] pci 0000:00:1d.0: reg 0x10: [mem 0xfbb22000-0xfbb223ff] [ 2.212003] pci 0000:00:1d.0: PME# supported from D0 D3hot D3cold [ 2.216015] pci 0000:00:1e.0: [8086:244e] type 01 class 0x060401 [ 2.224062] pci 0000:00:1f.0: [8086:1d41] type 00 class 0x060100 [ 2.228129] pci 0000:00:1f.2: [8086:1d02] type 00 class 0x010601 [ 2.235925] pci 0000:00:1f.2: reg 0x10: [io 0xf050-0xf057] [ 2.239918] pci 0000:00:1f.2: reg 0x14: [io 0xf040-0xf043] [ 2.247918] pci 0000:00:1f.2: reg 0x18: [io 0xf030-0xf037] [ 2.251918] pci 0000:00:1f.2: reg 0x1c: [io 0xf020-0xf023] [ 2.259918] pci 0000:00:1f.2: reg 0x20: [io 0xf000-0xf01f] [ 2.263918] pci 0000:00:1f.2: reg 0x24: [mem 0xfbb21000-0xfbb217ff] [ 2.267956] pci 0000:00:1f.2: PME# supported from D3hot [ 2.276003] pci 0000:00:1f.3: [8086:1d22] type 00 class 0x0c0500 [ 2.279929] pci 0000:00:1f.3: reg 0x10: [mem 0xfbb20000-0xfbb200ff 64bit] [ 2.287935] pci 0000:00:1f.3: reg 0x20: [io 0x1180-0x119f] [ 2.291988] pci 0000:00:1f.6: [8086:1d24] type 00 class 0x118000 [ 2.299932] pci 0000:00:1f.6: reg 0x10: [mem 0xfed08000-0xfed08fff 64bit] [ 2.308075] pci 0000:00:01.0: PCI bridge to [bus 01] [ 2.311964] pci 0000:00:01.1: PCI bridge to [bus 02] [ 2.315962] pci 0000:00:03.0: PCI bridge to [bus 03] [ 2.319995] pci 0000:04:00.0: [8086:1d6b] type 00 class 0x010700 [ 2.327935] pci 0000:04:00.0: reg 0x10: [mem 0xfa47c000-0xfa47ffff 64bit pref] [ 2.335926] pci 0000:04:00.0: reg 0x18: [mem 0xfa000000-0xfa3fffff 64bit pref] [ 2.343921] pci 0000:04:00.0: reg 0x20: [io 0xe000-0xe0ff] [ 2.347938] pci 0000:04:00.0: enabling Extended Tags [ 2.352018] pci 0000:04:00.0: reg 0x164: [mem 0xfa400000-0xfa403fff 64bit pref] [ 2.359912] pci 0000:04:00.0: VF(n) BAR0 space: [mem 0xfa400000-0xfa47bfff 64bit pref] (contains BAR0 for 31 VFs) [ 2.372169] pci 0000:00:11.0: PCI bridge to [bus 04] [ 2.375915] pci 0000:00:11.0: bridge window [io 0xe000-0xefff] [ 2.379920] pci 0000:00:11.0: bridge window [mem 0xfa000000-0xfa4fffff 64bit pref] [ 2.388010] pci 0000:05:00.0: [8086:10d3] type 00 class 0x020000 [ 2.395947] pci 0000:05:00.0: reg 0x10: [mem 0xfba00000-0xfba1ffff] [ 2.403949] pci 0000:05:00.0: reg 0x18: [io 0xd000-0xd01f] [ 2.407930] pci 0000:05:00.0: reg 0x1c: [mem 0xfba20000-0xfba23fff] [ 2.412101] pci 0000:05:00.0: PME# supported from D0 D3hot D3cold [ 2.420133] pci 0000:00:1c.0: PCI bridge to [bus 05] [ 2.423915] pci 0000:00:1c.0: bridge window [io 0xd000-0xdfff] [ 2.431914] pci 0000:00:1c.0: bridge window [mem 0xfba00000-0xfbafffff] [ 2.440013] pci 0000:06:00.0: [8086:10d3] type 00 class 0x020000 [ 2.443947] pci 0000:06:00.0: reg 0x10: [mem 0xfb900000-0xfb91ffff] [ 2.451949] pci 0000:06:00.0: reg 0x18: [io 0xc000-0xc01f] [ 2.455930] pci 0000:06:00.0: reg 0x1c: [mem 0xfb920000-0xfb923fff] [ 2.464098] pci 0000:06:00.0: PME# supported from D0 D3hot D3cold [ 2.468129] pci 0000:00:1c.1: PCI bridge to [bus 06] [ 2.471915] pci 0000:00:1c.1: bridge window [io 0xc000-0xcfff] [ 2.479914] pci 0000:00:1c.1: bridge window [mem 0xfb900000-0xfb9fffff] [ 2.487934] pci_bus 0000:07: extended config space not accessible [ 2.491938] pci 0000:07:01.0: [102b:0532] type 00 class 0x030000 [ 2.499928] pci 0000:07:01.0: reg 0x10: [mem 0xf9000000-0xf9ffffff pref] [ 2.503920] pci 0000:07:01.0: reg 0x14: [mem 0xfb800000-0xfb803fff] [ 2.511920] pci 0000:07:01.0: reg 0x18: [mem 0xfb000000-0xfb7fffff] [ 2.519959] pci 0000:07:01.0: Video device with shadowed ROM at [mem 0x000c0000-0x000dffff] [ 2.528024] pci 0000:00:1e.0: PCI bridge to [bus 07] (subtractive decode) [ 2.531916] pci 0000:00:1e.0: bridge window [mem 0xfb000000-0xfb8fffff] [ 2.539918] pci 0000:00:1e.0: bridge window [mem 0xf9000000-0xf9ffffff 64bit pref] [ 2.547912] pci 0000:00:1e.0: bridge window [io 0x0000-0x03af window] (subtractive decode) [ 2.555912] pci 0000:00:1e.0: bridge window [io 0x03e0-0x0cf7 window] (subtractive decode) [ 2.563912] pci 0000:00:1e.0: bridge window [io 0x03b0-0x03df window] (subtractive decode) [ 2.571912] pci 0000:00:1e.0: bridge window [io 0x0d00-0xffff window] (subtractive decode) [ 2.583912] pci 0000:00:1e.0: bridge window [mem 0x000a0000-0x000dffff window] (subtractive decode) [ 2.591912] pci 0000:00:1e.0: bridge window [mem 0xfed08000-0xfed08fff window] (subtractive decode) [ 2.599912] pci 0000:00:1e.0: bridge window [mem 0xfed0e000-0xfed0ffff window] (subtractive decode) [ 2.607912] pci 0000:00:1e.0: bridge window [mem 0x80000000-0xfbffffff window] (subtractive decode) [ 2.620713] ACPI: PCI Root Bridge [UNC0] (domain 0000 [bus ff]) [ 2.623916] acpi PNP0A03:00: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI HPX-Type3] [ 2.635931] acpi PNP0A03:00: _OSC: OS now controls [PCIeHotplug SHPCHotplug PME AER PCIeCapability LTR] [ 2.643912] acpi PNP0A03:00: FADT indicates ASPM is unsupported, using BIOS configuration [ 2.651980] PCI host bridge to bus 0000:ff [ 2.655913] pci_bus 0000:ff: root bus resource [bus ff] [ 2.659925] pci 0000:ff:08.0: [8086:0e80] type 00 class 0x088000 [ 2.667992] pci 0000:ff:09.0: [8086:0e90] type 00 class 0x088000 [ 2.671981] pci 0000:ff:0a.0: [8086:0ec0] type 00 class 0x088000 [ 2.679972] pci 0000:ff:0a.1: [8086:0ec1] type 00 class 0x088000 [ 2.683971] pci 0000:ff:0a.2: [8086:0ec2] type 00 class 0x088000 [ 2.691974] pci 0000:ff:0a.3: [8086:0ec3] type 00 class 0x088000 [ 2.699979] pci 0000:ff:0b.0: [8086:0e1e] type 00 class 0x088000 [ 2.703969] pci 0000:ff:0b.3: [8086:0e1f] type 00 class 0x088000 [ 2.711970] pci 0000:ff:0c.0: [8086:0ee0] type 00 class 0x088000 [ 2.715970] pci 0000:ff:0c.1: [8086:0ee2] type 00 class 0x088000 [ 2.723972] pci 0000:ff:0d.0: [8086:0ee1] type 00 class 0x088000 [ 2.727969] pci 0000:ff:0d.1: [8086:0ee3] type 00 class 0x088000 [ 2.735973] pci 0000:ff:0e.0: [8086:0ea0] type 00 class 0x088000 [ 2.739974] pci 0000:ff:0e.1: [8086:0e30] type 00 class 0x110100 [ 2.747988] pci 0000:ff:0f.0: [8086:0ea8] type 00 class 0x088000 [ 2.752000] pci 0000:ff:0f.1: [8086:0e71] type 00 class 0x088000 [ 2.759994] pci 0000:ff:0f.2: [8086:0eaa] type 00 class 0x088000 [ 2.763995] pci 0000:ff:0f.3: [8086:0eab] type 00 class 0x088000 [ 2.771994] pci 0000:ff:0f.4: [8086:0eac] type 00 class 0x088000 [ 2.775993] pci 0000:ff:0f.5: [8086:0ead] type 00 class 0x088000 [ 2.783997] pci 0000:ff:10.0: [8086:0eb0] type 00 class 0x088000 [ 2.787996] pci 0000:ff:10.1: [8086:0eb1] type 00 class 0x088000 [ 2.796003] pci 0000:ff:10.2: [8086:0eb2] type 00 class 0x088000 [ 2.799996] pci 0000:ff:10.3: [8086:0eb3] type 00 class 0x088000 [ 2.807994] pci 0000:ff:10.4: [8086:0eb4] type 00 class 0x088000 [ 2.811995] pci 0000:ff:10.5: [8086:0eb5] type 00 class 0x088000 [ 2.820000] pci 0000:ff:10.6: [8086:0eb6] type 00 class 0x088000 [ 2.823994] pci 0000:ff:10.7: [8086:0eb7] type 00 class 0x088000 [ 2.831993] pci 0000:ff:13.0: [8086:0e1d] type 00 class 0x088000 [ 2.835972] pci 0000:ff:13.1: [8086:0e34] type 00 class 0x110100 [ 2.843977] pci 0000:ff:13.4: [8086:0e81] type 00 class 0x088000 [ 2.851972] pci 0000:ff:13.5: [8086:0e36] type 00 class 0x110100 [ 2.855974] pci 0000:ff:16.0: [8086:0ec8] type 00 class 0x088000 [ 2.863970] pci 0000:ff:16.1: [8086:0ec9] type 00 class 0x088000 [ 2.867969] pci 0000:ff:16.2: [8086:0eca] type 00 class 0x088000 [ 2.876133] ACPI: PCI: Interrupt link LNKA configured for IRQ 11 [ 2.879966] ACPI: PCI: Interrupt link LNKB configured for IRQ 10 [ 2.887965] ACPI: PCI: Interrupt link LNKC configured for IRQ 5 [ 2.891964] ACPI: PCI: Interrupt link LNKD configured for IRQ 11 [ 2.899964] ACPI: PCI: Interrupt link LNKE configured for IRQ 0 [ 2.903964] ACPI: PCI: Interrupt link LNKF configured for IRQ 0 [ 2.911980] ACPI: PCI: Interrupt link LNKG configured for IRQ 0 [ 2.915964] ACPI: PCI: Interrupt link LNKH configured for IRQ 7 [ 2.925539] iommu: Default domain type: Translated [ 2.927912] iommu: DMA domain TLB invalidation policy: lazy mode [ 2.936004] pps_core: LinuxPPS API ver. 1 registered [ 2.939912] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti [ 2.947914] PTP clock support registered [ 2.951851] EDAC MC: Ver: 3.0.0 [ 2.956174] NetLabel: Initializing [ 2.959576] NetLabel: domain hash size = 128 [ 2.963914] NetLabel: protocols = UNLABELED CIPSOv4 CALIPSO [ 2.971934] NetLabel: unlabeled traffic allowed by default [ 2.975912] PCI: Using ACPI for IRQ routing [ 2.986914] PCI: pci_cache_line_size set to 64 bytes [ 2.987040] e820: reserve RAM buffer [mem 0x0009ac00-0x0009ffff] [ 2.987043] e820: reserve RAM buffer [mem 0x7de2c000-0x7fffffff] [ 2.987955] pci 0000:07:01.0: vgaarb: setting as boot VGA device [ 2.991910] pci 0000:07:01.0: vgaarb: bridge control possible [ 2.991910] pci 0000:07:01.0: vgaarb: VGA device added: decodes=io+mem,owns=io+mem,locks=none [ 3.007919] vgaarb: loaded [ 3.012453] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0, 0, 0, 0, 0, 0 [ 3.019912] hpet0: 8 comparators, 64-bit 14.318180 MHz counter [ 3.027911] clocksource: Switched to clocksource tsc-early [ 3.033615] VFS: Disk quotas dquot_6.6.0 [ 3.037558] VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes) [ 3.044628] AppArmor: AppArmor Filesystem Enabled [ 3.049368] pnp: PnP ACPI init [ 3.052579] system 00:00: [mem 0xfc000000-0xfcffffff] has been reserved [ 3.059202] system 00:00: [mem 0xfd000000-0xfdffffff] has been reserved [ 3.065812] system 00:00: [mem 0xfe000000-0xfeafffff] has been reserved [ 3.072425] system 00:00: [mem 0xfeb00000-0xfebfffff] has been reserved [ 3.079170] system 00:01: [mem 0xfbffc000-0xfbffdfff] could not be reserved [ 3.086274] system 00:03: [io 0x04d0-0x04d1] has been reserved [ 3.092199] system 00:03: [mem 0x00000400-0x000004ff] could not be reserved [ 3.099482] system 00:06: [io 0x0b00-0x0b7f] has been reserved [ 3.105613] pnp 00:07: [dma 0 disabled] [ 3.105856] pnp 00:08: [dma 0 disabled] [ 3.106139] system 00:09: [io 0x0400-0x0453] has been reserved [ 3.112065] system 00:09: [io 0x0458-0x047f] has been reserved [ 3.117983] system 00:09: [io 0x1180-0x119f] has been reserved [ 3.123900] system 00:09: [io 0x0500-0x057f] has been reserved [ 3.129821] system 00:09: [mem 0xfed1c000-0xfed1ffff] has been reserved [ 3.136435] system 00:09: [mem 0xfec00000-0xfecfffff] could not be reserved [ 3.143396] system 00:09: [mem 0xff000000-0xffffffff] has been reserved [ 3.150116] system 00:0a: [io 0x0454-0x0457] has been reserved [ 3.156321] system 00:0b: [mem 0x00000000-0x0009ffff] could not be reserved [ 3.163568] pnp: PnP ACPI: found 12 devices [ 3.174305] clocksource: acpi_pm: mask: 0xffffff max_cycles: 0xffffff, max_idle_ns: 2085701024 ns [ 3.183284] NET: Registered PF_INET protocol family [ 3.188347] IP idents hash table entries: 131072 (order: 8, 1048576 bytes, linear) [ 3.198687] tcp_listen_portaddr_hash hash table entries: 4096 (order: 4, 65536 bytes, linear) [ 3.207263] Table-perturb hash table entries: 65536 (order: 6, 262144 bytes, linear) [ 3.215095] TCP established hash table entries: 65536 (order: 7, 524288 bytes, linear) [ 3.223391] TCP bind hash table entries: 65536 (order: 9, 2097152 bytes, linear) [ 3.231186] TCP: Hash tables configured (established 65536 bind 65536) [ 3.237814] MPTCP token hash table entries: 8192 (order: 5, 196608 bytes, linear) [ 3.245367] UDP hash table entries: 4096 (order: 5, 131072 bytes, linear) [ 3.252196] UDP-Lite hash table entries: 4096 (order: 5, 131072 bytes, linear) [ 3.259484] NET: Registered PF_UNIX/PF_LOCAL protocol family [ 3.265155] NET: Registered PF_XDP protocol family [ 3.269969] pci 0000:00:01.0: PCI bridge to [bus 01] [ 3.274950] pci 0000:00:01.1: PCI bridge to [bus 02] [ 3.279923] pci 0000:00:03.0: PCI bridge to [bus 03] [ 3.284899] pci 0000:00:11.0: PCI bridge to [bus 04] [ 3.289867] pci 0000:00:11.0: bridge window [io 0xe000-0xefff] [ 3.295968] pci 0000:00:11.0: bridge window [mem 0xfa000000-0xfa4fffff 64bit pref] [ 3.303714] pci 0000:00:1c.0: PCI bridge to [bus 05] [ 3.308684] pci 0000:00:1c.0: bridge window [io 0xd000-0xdfff] [ 3.314778] pci 0000:00:1c.0: bridge window [mem 0xfba00000-0xfbafffff] [ 3.321570] pci 0000:00:1c.1: PCI bridge to [bus 06] [ 3.326538] pci 0000:00:1c.1: bridge window [io 0xc000-0xcfff] [ 3.332634] pci 0000:00:1c.1: bridge window [mem 0xfb900000-0xfb9fffff] [ 3.339427] pci 0000:00:1e.0: PCI bridge to [bus 07] [ 3.344396] pci 0000:00:1e.0: bridge window [mem 0xfb000000-0xfb8fffff] [ 3.351180] pci 0000:00:1e.0: bridge window [mem 0xf9000000-0xf9ffffff 64bit pref] [ 3.358925] pci_bus 0000:00: resource 4 [io 0x0000-0x03af window] [ 3.365107] pci_bus 0000:00: resource 5 [io 0x03e0-0x0cf7 window] [ 3.371286] pci_bus 0000:00: resource 6 [io 0x03b0-0x03df window] [ 3.377468] pci_bus 0000:00: resource 7 [io 0x0d00-0xffff window] [ 3.383647] pci_bus 0000:00: resource 8 [mem 0x000a0000-0x000dffff window] [ 3.390520] pci_bus 0000:00: resource 9 [mem 0xfed08000-0xfed08fff window] [ 3.397392] pci_bus 0000:00: resource 10 [mem 0xfed0e000-0xfed0ffff window] [ 3.404353] pci_bus 0000:00: resource 11 [mem 0x80000000-0xfbffffff window] [ 3.411316] pci_bus 0000:04: resource 0 [io 0xe000-0xefff] [ 3.416887] pci_bus 0000:04: resource 2 [mem 0xfa000000-0xfa4fffff 64bit pref] [ 3.424107] pci_bus 0000:05: resource 0 [io 0xd000-0xdfff] [ 3.429679] pci_bus 0000:05: resource 1 [mem 0xfba00000-0xfbafffff] [ 3.435947] pci_bus 0000:06: resource 0 [io 0xc000-0xcfff] [ 3.441520] pci_bus 0000:06: resource 1 [mem 0xfb900000-0xfb9fffff] [ 3.447787] pci_bus 0000:07: resource 1 [mem 0xfb000000-0xfb8fffff] [ 3.454052] pci_bus 0000:07: resource 2 [mem 0xf9000000-0xf9ffffff 64bit pref] [ 3.461273] pci_bus 0000:07: resource 4 [io 0x0000-0x03af window] [ 3.467453] pci_bus 0000:07: resource 5 [io 0x03e0-0x0cf7 window] [ 3.473632] pci_bus 0000:07: resource 6 [io 0x03b0-0x03df window] [ 3.479813] pci_bus 0000:07: resource 7 [io 0x0d00-0xffff window] [ 3.485993] pci_bus 0000:07: resource 8 [mem 0x000a0000-0x000dffff window] [ 3.492866] pci_bus 0000:07: resource 9 [mem 0xfed08000-0xfed08fff window] [ 3.499738] pci_bus 0000:07: resource 10 [mem 0xfed0e000-0xfed0ffff window] [ 3.506699] pci_bus 0000:07: resource 11 [mem 0x80000000-0xfbffffff window] [ 3.513754] pci 0000:00:05.0: disabled boot interrupts on device [8086:0e28] [ 3.541635] pci 0000:00:1a.0: quirk_usb_early_handoff+0x0/0x750 took 20325 usecs [ 3.573621] pci 0000:00:1d.0: quirk_usb_early_handoff+0x0/0x750 took 23990 usecs [ 3.581130] PCI: CLS 64 bytes, default 64 [ 3.585177] DMAR: No SATC found [ 3.585232] Trying to unpack rootfs image as initramfs... [ 3.588321] DMAR: dmar0: Using Queued invalidation [ 3.588401] pci 0000:00:00.0: Adding to iommu group 0 [ 3.603640] pci 0000:00:01.0: Adding to iommu group 1 [ 3.608723] pci 0000:00:01.1: Adding to iommu group 2 [ 3.613806] pci 0000:00:03.0: Adding to iommu group 3 [ 3.618887] pci 0000:00:04.0: Adding to iommu group 4 [ 3.623969] pci 0000:00:04.1: Adding to iommu group 5 [ 3.629052] pci 0000:00:04.2: Adding to iommu group 6 [ 3.634132] pci 0000:00:04.3: Adding to iommu group 7 [ 3.639215] pci 0000:00:04.4: Adding to iommu group 8 [ 3.644295] pci 0000:00:04.5: Adding to iommu group 9 [ 3.649376] pci 0000:00:04.6: Adding to iommu group 10 [ 3.654539] pci 0000:00:04.7: Adding to iommu group 11 [ 3.659707] pci 0000:00:05.0: Adding to iommu group 12 [ 3.664873] pci 0000:00:05.2: Adding to iommu group 13 [ 3.670043] pci 0000:00:05.4: Adding to iommu group 14 [ 3.675212] pci 0000:00:11.0: Adding to iommu group 15 [ 3.680404] pci 0000:00:16.0: Adding to iommu group 16 [ 3.685570] pci 0000:00:16.1: Adding to iommu group 16 [ 3.690743] pci 0000:00:1a.0: Adding to iommu group 17 [ 3.695915] pci 0000:00:1c.0: Adding to iommu group 18 [ 3.701090] pci 0000:00:1c.1: Adding to iommu group 19 [ 3.706259] pci 0000:00:1d.0: Adding to iommu group 20 [ 3.711427] pci 0000:00:1e.0: Adding to iommu group 21 [ 3.716636] pci 0000:00:1f.0: Adding to iommu group 22 [ 3.721801] pci 0000:00:1f.2: Adding to iommu group 22 [ 3.726965] pci 0000:00:1f.3: Adding to iommu group 22 [ 3.732133] pci 0000:00:1f.6: Adding to iommu group 22 [ 3.737307] pci 0000:04:00.0: Adding to iommu group 23 [ 3.742472] pci 0000:05:00.0: Adding to iommu group 24 [ 3.747638] pci 0000:06:00.0: Adding to iommu group 25 [ 3.752785] pci 0000:07:01.0: Adding to iommu group 21 [ 3.757969] pci 0000:ff:08.0: Adding to iommu group 26 [ 3.763147] pci 0000:ff:09.0: Adding to iommu group 27 [ 3.768362] pci 0000:ff:0a.0: Adding to iommu group 28 [ 3.773532] pci 0000:ff:0a.1: Adding to iommu group 28 [ 3.778704] pci 0000:ff:0a.2: Adding to iommu group 28 [ 3.783875] pci 0000:ff:0a.3: Adding to iommu group 28 [ 3.789070] pci 0000:ff:0b.0: Adding to iommu group 29 [ 3.794239] pci 0000:ff:0b.3: Adding to iommu group 29 [ 3.799435] pci 0000:ff:0c.0: Adding to iommu group 30 [ 3.804606] pci 0000:ff:0c.1: Adding to iommu group 30 [ 3.809804] pci 0000:ff:0d.0: Adding to iommu group 31 [ 3.814976] pci 0000:ff:0d.1: Adding to iommu group 31 [ 3.820164] pci 0000:ff:0e.0: Adding to iommu group 32 [ 3.825339] pci 0000:ff:0e.1: Adding to iommu group 32 [ 3.830509] pci 0000:ff:0f.0: Adding to iommu group 33 [ 3.835672] pci 0000:ff:0f.1: Adding to iommu group 34 [ 3.840837] pci 0000:ff:0f.2: Adding to iommu group 35 [ 3.846005] pci 0000:ff:0f.3: Adding to iommu group 36 [ 3.851170] pci 0000:ff:0f.4: Adding to iommu group 37 [ 3.856336] pci 0000:ff:0f.5: Adding to iommu group 38 [ 3.861505] pci 0000:ff:10.0: Adding to iommu group 39 [ 3.866679] pci 0000:ff:10.1: Adding to iommu group 40 [ 3.871850] pci 0000:ff:10.2: Adding to iommu group 41 [ 3.877018] pci 0000:ff:10.3: Adding to iommu group 42 [ 3.882182] pci 0000:ff:10.4: Adding to iommu group 43 [ 3.887352] pci 0000:ff:10.5: Adding to iommu group 44 [ 3.892523] pci 0000:ff:10.6: Adding to iommu group 45 [ 3.897687] pci 0000:ff:10.7: Adding to iommu group 46 [ 3.902914] pci 0000:ff:13.0: Adding to iommu group 47 [ 3.908091] pci 0000:ff:13.1: Adding to iommu group 47 [ 3.913261] pci 0000:ff:13.4: Adding to iommu group 47 [ 3.918436] pci 0000:ff:13.5: Adding to iommu group 47 [ 3.923640] pci 0000:ff:16.0: Adding to iommu group 48 [ 3.928811] pci 0000:ff:16.1: Adding to iommu group 48 [ 3.933991] pci 0000:ff:16.2: Adding to iommu group 48 [ 3.943029] DMAR: Intel(R) Virtualization Technology for Directed I/O [ 3.949483] PCI-DMA: Using software bounce buffering for IO (SWIOTLB) [ 3.955925] software IO TLB: mapped [mem 0x0000000079e2c000-0x000000007de2c000] (64MB) [ 3.964403] Initialise system trusted keyrings [ 3.968873] Key type blacklist registered [ 3.972967] workingset: timestamp_bits=36 max_order=21 bucket_order=0 [ 3.981266] zbud: loaded [ 3.984128] integrity: Platform Keyring initialized [ 3.989020] integrity: Machine keyring initialized [ 3.993811] Key type asymmetric registered [ 3.997909] Asymmetric key parser 'x509' registered [ 4.029398] Freeing initrd memory: 39592K [ 4.040664] alg: self-tests for CTR-KDF (hmac(sha256)) passed [ 4.046453] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 248) [ 4.053893] io scheduler mq-deadline registered [ 4.060865] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4 [ 4.067684] Monitor-Mwait will be used to enter C-1 state [ 4.067698] Monitor-Mwait will be used to enter C-2 state [ 4.067705] ACPI: \_SB_.SCK0.C000: Found 2 idle states [ 4.077755] ERST: Error Record Serialization Table (ERST) support is initialized. [ 4.085240] pstore: Registered erst as persistent store backend [ 4.091309] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled [ 4.097745] 00:07: ttyS0 at I/O 0x3f8 (irq = 4, base_baud = 115200) is a 16550A [ 4.105841] 00:08: ttyS1 at I/O 0x2f8 (irq = 3, base_baud = 115200) is a 16550A [ 4.114083] Linux agpgart interface v0.103 [ 4.118316] AMD-Vi: AMD IOMMUv2 functionality not available on this system - This is not a bug. [ 4.127458] i8042: PNP: PS/2 Controller [PNP0f03:PS2M] at 0x60,0x64 irq 12 [ 4.134339] i8042: PNP: PS/2 controller doesn't have KBD irq; using default 1 [ 4.144206] serio: i8042 KBD port at 0x60,0x64 irq 1 [ 4.149179] serio: i8042 AUX port at 0x60,0x64 irq 12 [ 4.154432] mousedev: PS/2 mouse device common for all mice [ 4.160049] rtc_cmos 00:02: RTC can wake from S4 [ 4.164973] rtc_cmos 00:02: registered as rtc0 [ 4.169458] rtc_cmos 00:02: setting system clock to 2024-06-24T08:18:41 UTC (1719217121) [ 4.177590] rtc_cmos 00:02: alarms up to one month, y3k, 114 bytes nvram, hpet irqs [ 4.185417] intel_pstate: Intel P-state driver initializing [ 4.191268] ledtrig-cpu: registered to indicate activity on CPUs [ 4.215281] NET: Registered PF_INET6 protocol family [ 4.228132] Segment Routing with IPv6 [ 4.231822] In-situ OAM (IOAM) with IPv6 [ 4.235793] mip6: Mobile IPv6 [ 4.238772] NET: Registered PF_PACKET protocol family [ 4.243914] mpls_gso: MPLS GSO support [ 4.248133] microcode: sig=0x306e4, pf=0x8, revision=0x42e [ 4.253653] microcode: Microcode Update Driver: v2.2. [ 4.253660] IPI shorthand broadcast: enabled [ 4.263017] sched_clock: Marking stable (3273466606, 989517239)->(4633766454, -370782609) [ 4.271454] registered taskstats version 1 [ 4.275569] Loading compiled-in X.509 certificates [ 4.320573] Loaded X.509 cert 'Debian Secure Boot CA: 6ccece7e4c6c0d1f6149f3dd27dfcc5cbb419ea1' [ 4.329310] Loaded X.509 cert 'Debian Secure Boot Signer 2022 - linux: 14011249c2675ea8e5148542202005810584b25f' [ 4.339956] zswap: loaded using pool lzo/zbud [ 4.344543] Key type .fscrypt registered [ 4.348476] Key type fscrypt-provisioning registered [ 4.353729] pstore: Using crash dump compression: deflate [ 4.366037] Key type encrypted registered [ 4.370066] AppArmor: AppArmor sha1 policy hashing enabled [ 4.375567] ima: No TPM chip found, activating TPM-bypass! [ 4.381054] ima: Allocated hash algorithm: sha256 [ 4.385772] ima: No architecture policies found [ 4.390314] evm: Initialising EVM extended attributes: [ 4.395448] evm: security.selinux [ 4.398767] evm: security.SMACK64 (disabled) [ 4.403042] evm: security.SMACK64EXEC (disabled) [ 4.407661] evm: security.SMACK64TRANSMUTE (disabled) [ 4.412714] evm: security.SMACK64MMAP (disabled) [ 4.417333] evm: security.apparmor [ 4.420740] evm: security.ima [ 4.423713] evm: security.capability [ 4.427293] evm: HMAC attrs: 0x1 [ 4.604423] clk: Disabling unused clocks [ 4.609995] Freeing unused decrypted memory: 2036K [ 4.615483] Freeing unused kernel image (initmem) memory: 2796K [ 4.621477] Write protecting the kernel read-only data: 26624k [ 4.628060] Freeing unused kernel image (text/rodata gap) memory: 2040K [ 4.635013] Freeing unused kernel image (rodata/data gap) memory: 1180K [ 4.727677] x86/mm: Checked W+X mappings: passed, no W+X pages found. [ 4.734116] x86/mm: Checking user space page tables [ 4.813892] x86/mm: Checked W+X mappings: passed, no W+X pages found. [ 4.820333] Run /init as init process [ 4.824003] with arguments: [ 4.824005] /init [ 4.824006] with environment: [ 4.824008] HOME=/ [ 4.824009] TERM=linux [ 4.824010] BOOT_IMAGE=/vmlinuz-6.1.0-21-amd64 [ 4.989548] tsc: Refined TSC clocksource calibration: 1799.999 MHz [ 4.995741] clocksource: tsc: mask: 0xffffffffffffffff max_cycles: 0x19f228ab7a2, max_idle_ns: 440795289252 ns [ 5.005751] clocksource: Switched to clocksource tsc [ 5.041646] SCSI subsystem initialized [ 5.060883] i801_smbus 0000:00:1f.3: SMBus using PCI interrupt [ 5.067538] ACPI: bus type USB registered [ 5.071596] usbcore: registered new interface driver usbfs [ 5.074587] i2c i2c-0: 1/6 memory slots populated (from DMI) [ 5.077103] usbcore: registered new interface driver hub [ 5.082751] i2c i2c-0: Systems with more than 4 memory slots not supported yet, not instantiating SPD [ 5.088072] usbcore: registered new device driver usb [ 5.103336] e1000e: Intel(R) PRO/1000 Network Driver [ 5.108310] e1000e: Copyright(c) 1999 - 2015 Intel Corporation. [ 5.114927] e1000e 0000:05:00.0: Interrupt Throttling Rate (ints/sec) set to dynamic conservative mode [ 5.115658] libata version 3.00 loaded. [ 5.133686] ehci-pci 0000:00:1a.0: EHCI Host Controller [ 5.139046] ehci-pci 0000:00:1a.0: new USB bus registered, assigned bus number 1 [ 5.139255] ahci 0000:00:1f.2: version 3.0 [ 5.146711] ehci-pci 0000:00:1a.0: debug port 2 [ 5.155203] ehci-pci 0000:00:1a.0: irq 16, io mem 0xfbb23000 [ 5.156810] ahci 0000:00:1f.2: AHCI 0001.0300 32 slots 6 ports 6 Gbps 0x3f impl SATA mode [ 5.169057] ahci 0000:00:1f.2: flags: 64bit ncq sntf pm led clo pio slum part ems apst [ 5.173555] ehci-pci 0000:00:1a.0: USB 2.0 started, EHCI 1.00 [ 5.182911] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 6.01 [ 5.188446] e1000e 0000:05:00.0 0000:05:00.0 (uninitialized): registered PHC clock [ 5.191182] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 5.205965] usb usb1: Product: EHCI Host Controller [ 5.210846] usb usb1: Manufacturer: Linux 6.1.0-21-amd64 ehci_hcd [ 5.216939] usb usb1: SerialNumber: 0000:00:1a.0 [ 5.221798] hub 1-0:1.0: USB hub found [ 5.222060] isci: Intel(R) C600 SAS Controller Driver - version 1.2.0 [ 5.232021] isci 0000:04:00.0: driver configured for rev: 6 silicon [ 5.233559] hub 1-0:1.0: 2 ports detected [ 5.242976] ehci-pci 0000:00:1d.0: EHCI Host Controller [ 5.249621] ehci-pci 0000:00:1d.0: new USB bus registered, assigned bus number 2 [ 5.256532] isci 0000:04:00.0: OEM parameter table found in OROM [ 5.257357] ehci-pci 0000:00:1d.0: debug port 2 [ 5.257687] e1000e 0000:05:00.0 eth0: (PCI Express:2.5GT/s:Width x1) 00:25:90:eb:25:a6 [ 5.257691] e1000e 0000:05:00.0 eth0: Intel(R) PRO/1000 Network Connection [ 5.257772] e1000e 0000:05:00.0 eth0: MAC: 3, PHY: 8, PBA No: FFFFFF-0FF [ 5.258068] e1000e 0000:06:00.0: Interrupt Throttling Rate (ints/sec) set to dynamic conservative mode [ 5.258508] scsi host0: ahci [ 5.258998] scsi host1: ahci [ 5.259431] scsi host2: ahci [ 5.259840] scsi host3: ahci [ 5.260227] scsi host4: ahci [ 5.260616] scsi host5: ahci [ 5.260681] ata1: SATA max UDMA/133 abar m2048@0xfbb21000 port 0xfbb21100 irq 32 [ 5.260685] ata2: SATA max UDMA/133 abar m2048@0xfbb21000 port 0xfbb21180 irq 32 [ 5.260688] ata3: SATA max UDMA/133 abar m2048@0xfbb21000 port 0xfbb21200 irq 32 [ 5.260690] ata4: SATA max UDMA/133 abar m2048@0xfbb21000 port 0xfbb21280 irq 32 [ 5.260693] ata5: SATA max UDMA/133 abar m2048@0xfbb21000 port 0xfbb21300 irq 32 [ 5.260696] ata6: SATA max UDMA/133 abar m2048@0xfbb21000 port 0xfbb21380 irq 32 [ 5.263335] isci 0000:04:00.0: OEM SAS parameters (version: 1.0) loaded (platform) [ 5.271809] ehci-pci 0000:00:1d.0: irq 23, io mem 0xfbb22000 [ 5.276019] isci 0000:04:00.0: SCU controller 0: phy 3-0 cables: {short, short, short, short} [ 5.301544] ehci-pci 0000:00:1d.0: USB 2.0 started, EHCI 1.00 [ 5.307221] scsi host6: isci [ 5.307370] usb usb2: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 6.01 [ 5.311694] e1000e 0000:06:00.0 0000:06:00.0 (uninitialized): registered PHC clock [ 5.313081] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 5.366905] e1000e 0000:06:00.0 eth1: (PCI Express:2.5GT/s:Width x1) 00:25:90:eb:25:a7 [ 5.367866] usb usb2: Product: EHCI Host Controller [ 5.373529] e1000e 0000:06:00.0 eth1: Intel(R) PRO/1000 Network Connection [ 5.382045] usb usb2: Manufacturer: Linux 6.1.0-21-amd64 ehci_hcd [ 5.387871] e1000e 0000:06:00.0 eth1: MAC: 3, PHY: 8, PBA No: FFFFFF-0FF [ 5.390677] usb usb2: SerialNumber: 0000:00:1d.0 [ 5.451018] hub 2-0:1.0: USB hub found [ 5.454793] hub 2-0:1.0: 2 ports detected [ 5.501537] usb 1-1: new high-speed USB device number 2 using ehci-pci [ 5.572483] ata4: SATA link down (SStatus 0 SControl 300) [ 5.577924] ata3: SATA link down (SStatus 0 SControl 300) [ 5.583356] ata5: SATA link down (SStatus 0 SControl 300) [ 5.588782] ata6: SATA link down (SStatus 0 SControl 300) [ 5.594210] ata2: SATA link down (SStatus 0 SControl 300) [ 5.599646] ata1: SATA link up 6.0 Gbps (SStatus 133 SControl 300) [ 5.606638] ata1.00: ATA-8: WDC WD1003FBYZ-010FB0, 01.01V03, max UDMA/133 [ 5.613805] ata1.00: 1953525168 sectors, multi 16: LBA48 NCQ (depth 32), AA [ 5.621639] ata1.00: configured for UDMA/133 [ 5.625989] scsi: waiting for bus probes to complete ... [ 5.669934] usb 1-1: New USB device found, idVendor=8087, idProduct=0024, bcdDevice= 0.00 [ 5.678126] usb 1-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0 [ 5.685635] hub 1-1:1.0: USB hub found [ 5.689550] hub 1-1:1.0: 6 ports detected [ 5.713585] usb 2-1: new high-speed USB device number 2 using ehci-pci [ 5.741823] scsi 0:0:0:0: Direct-Access ATA WDC WD1003FBYZ-0 1V03 PQ: 0 ANSI: 5 [ 5.756967] e1000e 0000:06:00.0 enx002590eb25a7: renamed from eth1 [ 5.780752] sd 0:0:0:0: [sda] 1953525168 512-byte logical blocks: (1.00 TB/932 GiB) [ 5.786290] e1000e 0000:05:00.0 enx002590eb25a6: renamed from eth0 [ 5.788445] sd 0:0:0:0: [sda] Write Protect is off [ 5.799400] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00 [ 5.799431] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 5.808533] sd 0:0:0:0: [sda] Preferred minimum I/O size 512 bytes [ 5.840355] sda: sda1 sda2 < sda5 > [ 5.844198] sd 0:0:0:0: [sda] Attached SCSI disk [ 5.882055] usb 2-1: New USB device found, idVendor=8087, idProduct=0024, bcdDevice= 0.00 [ 5.890268] usb 2-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0 [ 5.898025] hub 2-1:1.0: USB hub found [ 5.901969] hub 2-1:1.0: 8 ports detected [ 5.989573] usb 1-1.1: new full-speed USB device number 3 using ehci-pci [ 6.103302] usb 1-1.1: New USB device found, idVendor=0557, idProduct=2221, bcdDevice= 0.01 [ 6.111667] usb 1-1.1: New USB device strings: Mfr=1, Product=2, SerialNumber=0 [ 6.118985] usb 1-1.1: Product: Hermon USB hidmouse Device [ 6.124477] usb 1-1.1: Manufacturer: Winbond Electronics Corp [ 6.143703] hid: raw HID events driver (C) Jiri Kosina [ 6.152901] device-mapper: core: CONFIG_IMA_DISABLE_HTABLE is disabled. Duplicate IMA measurements will not be recorded in the IMA log. [ 6.165143] device-mapper: uevent: version 1.0.3 [ 6.169881] device-mapper: ioctl: 4.47.0-ioctl (2022-07-28) initialised: dm-devel@redhat.com [ 6.171246] usbcore: registered new interface driver usbhid [ 6.183922] usbhid: USB HID core driver [ 6.190135] input: Winbond Electronics Corp Hermon USB hidmouse Device as /devices/pci0000:00/0000:00:1a.0/usb1/1-1/1-1.1/1-1.1:1.0/0003:0557:2221.0001/input/input3 [ 6.205005] hid-generic 0003:0557:2221.0001: input,hidraw0: USB HID v1.00 Mouse [Winbond Electronics Corp Hermon USB hidmouse Device] on usb-0000:00:1a.0-1.1/input0 [ 6.219895] input: Winbond Electronics Corp Hermon USB hidmouse Device as /devices/pci0000:00/0000:00:1a.0/usb1/1-1/1-1.1/1-1.1:1.1/0003:0557:2221.0002/input/input4 [ 6.293789] hid-generic 0003:0557:2221.0002: input,hidraw1: USB HID v1.00 Keyboard [Winbond Electronics Corp Hermon USB hidmouse Device] on usb-0000:00:1a.0-1.1/input1 [ 6.965307] PM: Image not found (code -22) [ 7.340453] EXT4-fs (dm-0): mounting ext3 file system using the ext4 subsystem [ 7.352093] EXT4-fs (dm-0): mounted filesystem with ordered data mode. Quota mode: none. [ 7.549002] Not activating Mandatory Access Control as /sbin/tomoyo-init does not exist. [ 9.190747] input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input5 [ 9.213574] ACPI: button: Power Button [PWRB] [ 9.218087] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input6 [ 9.225573] ACPI: button: Power Button [PWRF] [ 9.427779] dca service started, version 1.12.1 [ 9.435789] IPMI message handler: version 39.2 [ 9.479352] sd 0:0:0:0: Attached scsi generic sg0 type 0 [ 9.504678] ipmi device interface [ 9.512141] iTCO_vendor_support: vendor-support=0 [ 9.523956] ioatdma: Intel(R) QuickData Technology Driver 5.00 [ 9.530058] input: PC Speaker as /devices/platform/pcspkr/input/input7 [ 9.627509] iTCO_wdt iTCO_wdt.1.auto: unable to reset NO_REBOOT flag, device disabled by hardware/BIOS [ 9.664746] ipmi_si: IPMI System Interface driver [ 9.669495] ipmi_si dmi-ipmi-si.0: ipmi_platform: probing via SMBIOS [ 9.675850] ipmi_platform: ipmi_si: SMBIOS: io 0xca2 regsize 1 spacing 1 irq 0 [ 9.684247] ipmi_si: Adding SMBIOS-specified kcs state machine [ 9.690166] ipmi_si IPI0001:00: ipmi_platform: probing via ACPI [ 9.696212] ipmi_si IPI0001:00: ipmi_platform: [io 0x0ca2] regsize 1 spacing 1 irq 0 [ 9.725188] ipmi_si dmi-ipmi-si.0: Removing SMBIOS-specified kcs state machine in favor of ACPI [ 9.733902] ipmi_si: Adding ACPI-specified kcs state machine [ 9.739636] ipmi_si: Trying ACPI-specified kcs state machine at i/o address 0xca2, slave address 0x0, irq 0 [ 9.790040] mei_me 0000:00:16.0: Device doesn't have valid ME Interface [ 9.827731] RAPL PMU: API unit is 2^-32 Joules, 3 fixed counters, 163840 ms ovfl timer [ 9.835662] RAPL PMU: hw unit of domain pp0-core 2^-16 Joules [ 9.841407] RAPL PMU: hw unit of domain package 2^-16 Joules [ 9.841417] ACPI: bus type drm_connector registered [ 9.847063] RAPL PMU: hw unit of domain dram 2^-16 Joules [ 9.879074] cryptd: max_cpu_qlen set to 1000 [ 9.950632] AVX version of gcm_enc/dec engaged. [ 9.955226] AES CTR mode by8 optimization enabled [ 10.005769] mgag200 0000:07:01.0: vgaarb: deactivate vga console [ 10.016742] Console: switching to colour dummy device 80x25 [ 10.028179] [drm] Initialized mgag200 1.0.0 20110418 for 0000:07:01.0 on minor 0 [ 10.037394] fbcon: mgag200drmfb (fb0) is primary device [ 10.045671] ipmi_si IPI0001:00: The BMC does not support clearing the recv irq bit, compensating, but the BMC needs to be fixed. [ 10.061309] ipmi_si IPI0001:00: IPMI message handler: Found new BMC (man_id: 0x002a7c, prod_id: 0x0703, dev_id: 0x20) [ 10.087146] ipmi_si IPI0001:00: IPMI kcs interface initialized [ 10.090456] ipmi_ssif: IPMI SSIF Interface driver [ 10.410153] Console: switching to colour frame buffer device 128x48 [ 10.517871] mgag200 0000:07:01.0: [drm] fb0: mgag200drmfb frame buffer device [ 10.967143] EDAC sbridge: Seeking for: PCI ID 8086:0ea0 [ 10.967171] EDAC sbridge: Seeking for: PCI ID 8086:0ea0 [ 10.967178] EDAC sbridge: Seeking for: PCI ID 8086:0e60 [ 10.967186] EDAC sbridge: Seeking for: PCI ID 8086:0ea8 [ 10.967194] EDAC sbridge: Seeking for: PCI ID 8086:0ea8 [ 10.967198] EDAC sbridge: Seeking for: PCI ID 8086:0e71 [ 10.967206] EDAC sbridge: Seeking for: PCI ID 8086:0e71 [ 10.967210] EDAC sbridge: Seeking for: PCI ID 8086:0eaa [ 10.967218] EDAC sbridge: Seeking for: PCI ID 8086:0eaa [ 10.967222] EDAC sbridge: Seeking for: PCI ID 8086:0eab [ 10.967230] EDAC sbridge: Seeking for: PCI ID 8086:0eab [ 10.967233] EDAC sbridge: Seeking for: PCI ID 8086:0eac [ 10.967242] EDAC sbridge: Seeking for: PCI ID 8086:0eac [ 10.967245] EDAC sbridge: Seeking for: PCI ID 8086:0ead [ 10.967254] EDAC sbridge: Seeking for: PCI ID 8086:0ead [ 10.967257] EDAC sbridge: Seeking for: PCI ID 8086:0e68 [ 10.967265] EDAC sbridge: Seeking for: PCI ID 8086:0e79 [ 10.967272] EDAC sbridge: Seeking for: PCI ID 8086:0e6a [ 10.967280] EDAC sbridge: Seeking for: PCI ID 8086:0e6b [ 10.967288] EDAC sbridge: Seeking for: PCI ID 8086:0e6c [ 10.967295] EDAC sbridge: Seeking for: PCI ID 8086:0e6d [ 10.967303] EDAC sbridge: Seeking for: PCI ID 8086:0eb8 [ 10.967311] EDAC sbridge: Seeking for: PCI ID 8086:0ebc [ 10.967318] EDAC sbridge: Seeking for: PCI ID 8086:0ec8 [ 10.967328] EDAC sbridge: Seeking for: PCI ID 8086:0ec8 [ 10.967330] EDAC sbridge: Seeking for: PCI ID 8086:0ec9 [ 10.967339] EDAC sbridge: Seeking for: PCI ID 8086:0ec9 [ 10.967341] EDAC sbridge: Seeking for: PCI ID 8086:0eca [ 10.967351] EDAC sbridge: Seeking for: PCI ID 8086:0eca [ 10.967490] EDAC MC0: Giving out device to module sb_edac controller Ivy Bridge SrcID#0_Ha#0: DEV 0000:ff:0e.0 (INTERRUPT) [ 10.978569] EDAC sbridge: Ver: 1.1.2 [ 11.078706] intel_rapl_common: Found RAPL domain package [ 11.084065] intel_rapl_common: Found RAPL domain core [ 11.089131] intel_rapl_common: Found RAPL domain dram [ 12.266153] EXT4-fs (dm-0): re-mounted. Quota mode: none. [ 13.501024] EXT4-fs (sda1): mounting ext3 file system using the ext4 subsystem [ 13.532174] EXT4-fs (sda1): mounted filesystem with ordered data mode. Quota mode: none. [ 13.580708] Adding 1949692k swap on /dev/mapper/fiano1--vg-swap_1. Priority:-2 extents:1 across:1949692k FS [ 14.179809] audit: type=1400 audit(1719217131.628:2): apparmor="STATUS" operation="profile_load" profile="unconfined" name="nvidia_modprobe" pid=1068 comm="apparmor_parser" [ 14.195194] audit: type=1400 audit(1719217131.632:3): apparmor="STATUS" operation="profile_load" profile="unconfined" name="nvidia_modprobe//kmod" pid=1068 comm="apparmor_parser" [ 14.211207] audit: type=1400 audit(1719217131.632:4): apparmor="STATUS" operation="profile_load" profile="unconfined" name="lsb_release" pid=1067 comm="apparmor_parser" [ 14.233638] audit: type=1400 audit(1719217131.688:5): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/bin/man" pid=1070 comm="apparmor_parser" [ 14.248758] audit: type=1400 audit(1719217131.688:6): apparmor="STATUS" operation="profile_load" profile="unconfined" name="man_filter" pid=1070 comm="apparmor_parser" [ 14.263692] audit: type=1400 audit(1719217131.688:7): apparmor="STATUS" operation="profile_load" profile="unconfined" name="man_groff" pid=1070 comm="apparmor_parser" [ 14.415934] audit: type=1400 audit(1719217131.868:8): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/sbin/ntpd" pid=1079 comm="apparmor_parser" [ 14.448095] audit: type=1400 audit(1719217131.900:9): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=1069 comm="apparmor_parser" [ 14.466078] audit: type=1400 audit(1719217131.904:10): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/NetworkManager/nm-dhcp-helper" pid=1069 comm="apparmor_parser" [ 14.483528] audit: type=1400 audit(1719217131.904:11): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/connman/scripts/dhclient-script" pid=1069 comm="apparmor_parser" [ 17.482623] e1000e 0000:05:00.0 enx002590eb25a6: NIC Link is Up 1000 Mbps Full Duplex, Flow Control: None [ 17.493087] IPv6: ADDRCONF(NETDEV_CHANGE): enx002590eb25a6: link becomes ready