[ 0.000000] Linux version 6.10.0-rc5+ (osstest@himrod2) (gcc (Debian 12.2.0-14) 12.2.0, GNU ld (GNU Binutils for Debian) 2.40) #1 SMP PREEMPT_DYNAMIC Mon Jun 24 17:54:48 UTC 2024 [ 0.000000] Command line: placeholder root=/dev/mapper/huxelrebe0--vg-root ro console=hvc0 [ 0.000000] Released 0 page(s) [ 0.000000] BIOS-provided physical RAM map: [ 0.000000] Xen: [mem 0x0000000000000000-0x000000000009cfff] usable [ 0.000000] Xen: [mem 0x000000000009d800-0x00000000000fffff] reserved [ 0.000000] Xen: [mem 0x0000000000100000-0x0000000020062fff] usable [ 0.000000] Xen: [mem 0x00000000ca2b6000-0x00000000ca2bcfff] ACPI NVS [ 0.000000] Xen: [mem 0x00000000ca70a000-0x00000000cab93fff] reserved [ 0.000000] Xen: [mem 0x00000000da6f3000-0x00000000da784fff] reserved [ 0.000000] Xen: [mem 0x00000000da785000-0x00000000da7a8fff] ACPI data [ 0.000000] Xen: [mem 0x00000000da7a9000-0x00000000db4bbfff] ACPI NVS [ 0.000000] Xen: [mem 0x00000000db4bc000-0x00000000dbffefff] reserved [ 0.000000] Xen: [mem 0x00000000dd000000-0x00000000df1fffff] reserved [ 0.000000] Xen: [mem 0x00000000f8000000-0x00000000fbffffff] reserved [ 0.000000] Xen: [mem 0x00000000fec00000-0x00000000fec00fff] reserved [ 0.000000] Xen: [mem 0x00000000fed00000-0x00000000fed03fff] reserved [ 0.000000] Xen: [mem 0x00000000fed1c000-0x00000000fed1ffff] reserved [ 0.000000] Xen: [mem 0x00000000fed90000-0x00000000fed91fff] reserved [ 0.000000] Xen: [mem 0x00000000fee00000-0x00000000feefffff] reserved [ 0.000000] Xen: [mem 0x00000000ff000000-0x00000000ffffffff] reserved [ 0.000000] NX (Execute Disable) protection: active [ 0.000000] APIC: Static calls initialized [ 0.000000] SMBIOS 2.8 present. [ 0.000000] DMI: LENOVO ThinkServer RS140/ThinkServer RS140, BIOS FBKT75CUS 03/24/2014 [ 0.000000] DMI: Memory slots populated: 2/4 [ 0.000000] Hypervisor detected: Xen PV [ 0.000015] Xen PV: Detected 4 vCPUS [ 0.048536] tsc: Fast TSC calibration using PIT [ 0.048536] tsc: Detected 3192.849 MHz processor [ 0.048537] tsc: Detected 3192.606 MHz TSC [ 0.048796] e820: update [mem 0x00000000-0x00000fff] usable ==> reserved [ 0.048799] e820: remove [mem 0x000a0000-0x000fffff] usable [ 0.048804] last_pfn = 0x20063 max_arch_pfn = 0x400000000 [ 0.048806] MTRR map: 4 entries (0 fixed + 4 variable; max 20), built from 10 variable MTRRs [ 0.048807] MTRRs set to read-only [ 0.048809] x86/PAT: Configuration [0-7]: WB WT UC- UC WC WP UC UC [ 0.048836] Kernel/User page tables isolation: disabled on XEN PV. [ 0.064399] RAMDISK: [mem 0x04000000-0x053a4fff] [ 0.064404] ACPI: Early table checksum verification disabled [ 0.067082] ACPI: RSDP 0x00000000000F0450 000024 (v02 LENOVO) [ 0.067089] ACPI: XSDT 0x00000000DA78C098 0000B4 (v01 LENOVO TC-FB 000014B0 AMI 00010013) [ 0.067114] ACPI: FACP 0x00000000DA7A3758 00010C (v05 LENOVO TC-FB 000014B0 AMI 00010013) [ 0.067149] ACPI: DSDT 0x00000000DA78C1E0 017573 (v02 LENOVO TC-FB 000014B0 INTL 20120711) [ 0.067159] ACPI: FACS 0x00000000DB4BA080 000040 [ 0.067169] ACPI: APIC 0x00000000DA7A3868 000072 (v03 LENOVO TC-FB 000014B0 AMI 00010013) [ 0.067179] ACPI: FPDT 0x00000000DA7A38E0 000044 (v01 LENOVO TC-FB 000014B0 AMI 00010013) [ 0.067189] ACPI: TCPA 0x00000000DA7A3928 000032 (v02 LENOVO TC-FB 000014B0 MSFT 01000013) [ 0.067199] ACPI: LPIT 0x00000000DA7A3960 00005C (v01 LENOVO TC-FB 000014B0 AMI. 00000005) [ 0.067209] ACPI: SSDT 0x00000000DA7A39C0 000539 (v01 LENOVO TC-FB 000014B0 INTL 20120711) [ 0.067219] ACPI: SSDT 0x00000000DA7A3F00 000AD8 (v01 LENOVO TC-FB 000014B0 INTL 20120711) [ 0.067229] ACPI: MCFG 0x00000000DA7A49D8 00003C (v01 LENOVO TC-FB 000014B0 MSFT 00000097) [ 0.067239] ACPI: HPET 0x00000000DA7A4A18 000038 (v01 LENOVO TC-FB 000014B0 AMI. 00000005) [ 0.067249] ACPI: SSDT 0x00000000DA7A4A50 00036D (v01 LENOVO TC-FB 000014B0 INTL 20120711) [ 0.067259] ACPI: SSDT 0x00000000DA7A4DC0 0034E1 (v01 LENOVO TC-FB 000014B0 INTL 20091112) [ 0.067269] ACPI: ASF! 0x00000000DA7A82A8 0000A5 (v32 LENOVO TC-FB 000014B0 TFSM 000F4240) [ 0.067279] ACPI: RMAD 0x00000000DA7A8350 0000B8 (v01 LENOVO TC-FB 000014B0 INTL 00000001) [ 0.067289] ACPI: EINJ 0x00000000DA7A8408 000130 (v01 LENOVO TC-FB 000014B0 00000000) [ 0.067299] ACPI: ERST 0x00000000DA7A8538 000230 (v01 LENOVO TC-FB 000014B0 00000000) [ 0.067309] ACPI: HEST 0x00000000DA7A8768 0000A8 (v01 LENOVO TC-FB 000014B0 00000000) [ 0.067319] ACPI: BERT 0x00000000DA7A8810 000030 (v01 LENOVO TC-FB 000014B0 00000000) [ 0.067329] ACPI: BGRT 0x00000000DA7A8840 000038 (v00 LENOVO TC-FB 000014B0 AMI 00010013) [ 0.067334] ACPI: Reserving FACP table memory at [mem 0xda7a3758-0xda7a3863] [ 0.067336] ACPI: Reserving DSDT table memory at [mem 0xda78c1e0-0xda7a3752] [ 0.067336] ACPI: Reserving FACS table memory at [mem 0xdb4ba080-0xdb4ba0bf] [ 0.067337] ACPI: Reserving APIC table memory at [mem 0xda7a3868-0xda7a38d9] [ 0.067337] ACPI: Reserving FPDT table memory at [mem 0xda7a38e0-0xda7a3923] [ 0.067338] ACPI: Reserving TCPA table memory at [mem 0xda7a3928-0xda7a3959] [ 0.067339] ACPI: Reserving LPIT table memory at [mem 0xda7a3960-0xda7a39bb] [ 0.067339] ACPI: Reserving SSDT table memory at [mem 0xda7a39c0-0xda7a3ef8] [ 0.067340] ACPI: Reserving SSDT table memory at [mem 0xda7a3f00-0xda7a49d7] [ 0.067340] ACPI: Reserving MCFG table memory at [mem 0xda7a49d8-0xda7a4a13] [ 0.067341] ACPI: Reserving HPET table memory at [mem 0xda7a4a18-0xda7a4a4f] [ 0.067341] ACPI: Reserving SSDT table memory at [mem 0xda7a4a50-0xda7a4dbc] [ 0.067342] ACPI: Reserving SSDT table memory at [mem 0xda7a4dc0-0xda7a82a0] [ 0.067343] ACPI: Reserving ASF! table memory at [mem 0xda7a82a8-0xda7a834c] [ 0.067343] ACPI: Reserving RMAD table memory at [mem 0xda7a8350-0xda7a8407] [ 0.067344] ACPI: Reserving EINJ table memory at [mem 0xda7a8408-0xda7a8537] [ 0.067344] ACPI: Reserving ERST table memory at [mem 0xda7a8538-0xda7a8767] [ 0.067345] ACPI: Reserving HEST table memory at [mem 0xda7a8768-0xda7a880f] [ 0.067345] ACPI: Reserving BERT table memory at [mem 0xda7a8810-0xda7a883f] [ 0.067346] ACPI: Reserving BGRT table memory at [mem 0xda7a8840-0xda7a8877] [ 0.067410] APIC: Switched APIC routing to: Xen PV [ 0.069888] Zone ranges: [ 0.069889] DMA [mem 0x0000000000001000-0x0000000000ffffff] [ 0.069891] DMA32 [mem 0x0000000001000000-0x0000000020062fff] [ 0.069892] Normal empty [ 0.069893] Movable zone start for each node [ 0.069893] Early memory node ranges [ 0.069893] node 0: [mem 0x0000000000001000-0x000000000009cfff] [ 0.069895] node 0: [mem 0x0000000000100000-0x0000000020062fff] [ 0.069896] Initmem setup node 0 [mem 0x0000000000001000-0x0000000020062fff] [ 0.069899] On node 0, zone DMA: 1 pages in unavailable ranges [ 0.069927] On node 0, zone DMA: 99 pages in unavailable ranges [ 0.071019] On node 0, zone DMA32: 32669 pages in unavailable ranges [ 0.071021] p2m virtual area at (____ptrval____), size is 40000000 [ 0.148558] Remapped 99 page(s) [ 0.148908] Reserving Intel graphics memory at [mem 0xdd200000-0xdf1fffff] [ 0.149247] ACPI: PM-Timer IO Port: 0x1808 [ 0.149283] ACPI: LAPIC_NMI (acpi_id[0xff] high edge lint[0x1]) [ 0.149305] IOAPIC[0]: apic_id 8, version 32, address 0xfec00000, GSI 0-23 [ 0.149312] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl) [ 0.149314] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level) [ 0.149329] ACPI: Using ACPI (MADT) for SMP configuration information [ 0.149332] ACPI: HPET id: 0x8086a701 base: 0xfed00000 [ 0.149344] CPU topo: Max. logical packages: 1 [ 0.149345] CPU topo: Max. logical dies: 1 [ 0.149345] CPU topo: Max. dies per package: 1 [ 0.149349] CPU topo: Max. threads per core: 1 [ 0.149350] CPU topo: Num. cores per package: 4 [ 0.149350] CPU topo: Num. threads per package: 4 [ 0.149351] CPU topo: Allowing 4 present CPUs plus 0 hotplug CPUs [ 0.149360] PM: hibernation: Registered nosave memory: [mem 0x00000000-0x00000fff] [ 0.149362] PM: hibernation: Registered nosave memory: [mem 0x0009d000-0x0009dfff] [ 0.149363] PM: hibernation: Registered nosave memory: [mem 0x0009e000-0x000fffff] [ 0.149364] [mem 0x20063000-0xca2b5fff] available for PCI devices [ 0.149367] Booting kernel on Xen [ 0.149367] Xen version: 4.19-unstable (preserve-AD) [ 0.149370] clocksource: refined-jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 1910969940391419 ns [ 0.153759] setup_percpu: NR_CPUS:64 nr_cpumask_bits:4 nr_cpu_ids:4 nr_node_ids:1 [ 0.154068] percpu: Embedded 57 pages/cpu s194408 r8192 d30872 u524288 [ 0.154072] pcpu-alloc: s194408 r8192 d30872 u524288 alloc=1*2097152 [ 0.154074] pcpu-alloc: [0] 0 1 2 3 [ 0.154110] xen: PV spinlocks enabled [ 0.154112] PV qspinlock hash table entries: 256 (order: 0, 4096 bytes, linear) [ 0.154114] Kernel command line: placeholder root=/dev/mapper/huxelrebe0--vg-root ro console=hvc0 [ 0.154145] Unknown kernel command line parameters "placeholder", will be passed to user space. [ 0.154160] random: crng init done [ 0.154215] Dentry cache hash table entries: 65536 (order: 7, 524288 bytes, linear) [ 0.154246] Inode-cache hash table entries: 32768 (order: 6, 262144 bytes, linear) [ 0.154693] Built 1 zonelists, mobility grouping on. Total pages: 131071 [ 0.154695] mem auto-init: stack:all(zero), heap alloc:off, heap free:off [ 0.154697] software IO TLB: area num 4. [ 0.195732] Memory: 386516K/524284K available (16384K kernel code, 2753K rwdata, 6164K rodata, 2680K init, 1864K bss, 137516K reserved, 0K cma-reserved) [ 0.195834] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1 [ 0.197625] Dynamic Preempt: voluntary [ 0.197724] rcu: Preemptible hierarchical RCU implementation. [ 0.197725] rcu: RCU event tracing is enabled. [ 0.197725] rcu: RCU restricting CPUs from NR_CPUS=64 to nr_cpu_ids=4. [ 0.197726] Trampoline variant of Tasks RCU enabled. [ 0.197727] rcu: RCU calculated value of scheduler-enlistment delay is 100 jiffies. [ 0.197728] rcu: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=4 [ 0.197741] RCU Tasks: Setting shift to 2 and lim to 1 rcu_task_cb_adjust=1. [ 0.204768] NR_IRQS: 4352, nr_irqs: 456, preallocated irqs: 16 [ 0.204866] xen:events: Using FIFO-based ABI [ 0.204883] xen: --> pirq=1 -> irq=1 (gsi=1) [ 0.204889] xen: --> pirq=2 -> irq=2 (gsi=2) [ 0.204893] xen: --> pirq=3 -> irq=3 (gsi=3) [ 0.204898] xen: --> pirq=4 -> irq=4 (gsi=4) [ 0.204902] xen: --> pirq=5 -> irq=5 (gsi=5) [ 0.204907] xen: --> pirq=6 -> irq=6 (gsi=6) [ 0.204911] xen: --> pirq=7 -> irq=7 (gsi=7) [ 0.204916] xen: --> pirq=8 -> irq=8 (gsi=8) [ 0.204920] xen: --> pirq=9 -> irq=9 (gsi=9) [ 0.204925] xen: --> pirq=10 -> irq=10 (gsi=10) [ 0.204930] xen: --> pirq=11 -> irq=11 (gsi=11) [ 0.204935] xen: --> pirq=12 -> irq=12 (gsi=12) [ 0.204939] xen: --> pirq=13 -> irq=13 (gsi=13) [ 0.204945] xen: --> pirq=14 -> irq=14 (gsi=14) [ 0.204950] xen: --> pirq=15 -> irq=15 (gsi=15) [ 0.204957] rcu: srcu_init: Setting srcu_struct sizes based on contention. [ 0.206543] Console: colour VGA+ 80x25 [ 0.206545] printk: legacy console [tty0] enabled [ 0.214379] printk: legacy console [hvc0] enabled [ 0.215364] ACPI: Core revision 20240322 [ 0.224879] ACPI BIOS Warning (bug): Incorrect checksum in table [BGRT] - 0x92, should be 0x4D (20240322/utcksum-58) [ 0.225027] clocksource: xen: mask: 0xffffffffffffffff max_cycles: 0x1cd42e4dffb, max_idle_ns: 881590591483 ns [ 0.225113] Xen: using vcpuop timer interface [ 0.225119] installing Xen timer for CPU 0 [ 0.225209] clocksource: tsc-early: mask: 0xffffffffffffffff max_cycles: 0x2e050166e04, max_idle_ns: 440795273449 ns [ 0.225297] Calibrating delay loop (skipped), value calculated using timer frequency.. 6385.21 BogoMIPS (lpj=3192606) [ 0.225493] Last level iTLB entries: 4KB 1024, 2MB 1024, 4MB 1024 [ 0.225560] Last level dTLB entries: 4KB 1024, 2MB 1024, 4MB 1024, 1GB 4 [ 0.225679] Spectre V1 : Mitigation: usercopy/swapgs barriers and __user pointer sanitization [ 0.225758] Spectre V2 : Mitigation: Retpolines [ 0.225812] Spectre V2 : Spectre v2 / SpectreRSB mitigation: Filling RSB on context switch [ 0.225889] Spectre V2 : Spectre v2 / SpectreRSB : Filling RSB on VMEXIT [ 0.225949] Spectre V2 : Enabling Restricted Speculation for firmware calls [ 0.226009] Spectre V2 : mitigation: Enabling conditional Indirect Branch Prediction Barrier [ 0.226088] Speculative Store Bypass: Mitigation: Speculative Store Bypass disabled via prctl [ 0.226304] MDS: Mitigation: Clear CPU buffers [ 0.226359] MMIO Stale Data: Unknown: No mitigations [ 0.226414] SRBDS: Unknown: Dependent on hypervisor status [ 0.226485] x86/fpu: Supporting XSAVE feature 0x001: 'x87 floating point registers' [ 0.226562] x86/fpu: Supporting XSAVE feature 0x002: 'SSE registers' [ 0.226689] x86/fpu: Supporting XSAVE feature 0x004: 'AVX registers' [ 0.226748] x86/fpu: xstate_offset[2]: 576, xstate_sizes[2]: 256 [ 0.226807] x86/fpu: Enabled xstate features 0x7, context size is 832 bytes, using 'standard' format. [ 0.241829] Freeing SMP alternatives memory: 40K [ 0.241916] pid_max: default: 32768 minimum: 301 [ 0.241985] LSM: initializing lsm=capability,selinux [ 0.242045] SELinux: Initializing. [ 0.242116] Mount-cache hash table entries: 1024 (order: 1, 8192 bytes, linear) [ 0.242194] Mountpoint-cache hash table entries: 1024 (order: 1, 8192 bytes, linear) [ 0.243363] cpu 0 spinlock event irq 25 [ 0.243423] VPMU disabled by hypervisor. [ 0.243764] Performance Events: unsupported p6 CPU model 60 no PMU driver, software events only. [ 0.243847] signal: max sigframe size: 1776 [ 0.243943] rcu: Hierarchical SRCU implementation. [ 0.243999] rcu: Max phase no-delay instances is 400. [ 0.244354] smp: Bringing up secondary CPUs ... [ 0.244552] installing Xen timer for CPU 1 [ 0.244926] installing Xen timer for CPU 2 [ 0.245202] installing Xen timer for CPU 3 [ 0.021336] [Firmware Bug]: CPU 1: APIC ID mismatch. CPUID: 0x0001 APIC: 0x0002 [ 0.245336] cpu 1 spinlock event irq 45 [ 0.021336] [Firmware Bug]: CPU 2: APIC ID mismatch. CPUID: 0x0002 APIC: 0x0004 [ 0.245472] cpu 2 spinlock event irq 46 [ 0.021336] [Firmware Bug]: CPU 3: APIC ID mismatch. CPUID: 0x0003 APIC: 0x0006 [ 0.246322] cpu 3 spinlock event irq 47 [ 0.246486] smp: Brought up 1 node, 4 CPUs [ 0.246667] devtmpfs: initialized [ 0.246667] x86/mm: Memory block size: 128MB [ 0.247404] ACPI: PM: Registering ACPI NVS region [mem 0xca2b6000-0xca2bcfff] (28672 bytes) [ 0.247446] ACPI: PM: Registering ACPI NVS region [mem 0xda7a9000-0xdb4bbfff] (13709312 bytes) [ 0.247639] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 1911260446275000 ns [ 0.247722] futex hash table entries: 1024 (order: 4, 65536 bytes, linear) [ 0.247892] PM: RTC time: 18:52:45, date: 2024-06-24 [ 0.248046] NET: Registered PF_NETLINK/PF_ROUTE protocol family [ 0.248131] xen:grant_table: Grant tables using version 1 layout [ 0.248364] Grant table initialized [ 0.248533] audit: initializing netlink subsys (disabled) [ 0.248628] audit: type=2000 audit(1719255165.614:1): state=initialized audit_enabled=0 res=1 [ 0.248628] thermal_sys: Registered thermal governor 'step_wise' [ 0.248628] thermal_sys: Registered thermal governor 'user_space' [ 0.248628] ACPI FADT declares the system doesn't support PCIe ASPM, so disable it [ 0.248661] PCI: ECAM [mem 0xf8000000-0xfbffffff] (base 0xf8000000) for domain 0000 [bus 00-3f] [ 0.249300] PCI: ECAM [mem 0xf8000000-0xfbffffff] reserved as E820 entry [ 0.270815] PCI: Using configuration type 1 for base access [ 0.270971] kprobes: kprobe jump-optimization is enabled. All kprobes are optimized if possible. [ 0.271323] ACPI: Added _OSI(Module Device) [ 0.271382] ACPI: Added _OSI(Processor Device) [ 0.271440] ACPI: Added _OSI(3.0 _SCP Extensions) [ 0.271497] ACPI: Added _OSI(Processor Aggregator Device) [ 0.285885] ACPI: 5 ACPI AML tables successfully acquired and loaded [ 0.286580] xen: registering gsi 9 triggering 0 polarity 0 [ 0.286729] ACPI: [Firmware Bug]: BIOS _OSI(Linux) query ignored [ 0.288369] ACPI: Dynamic OEM Table Load: [ 0.288431] ACPI: SSDT 0xFFFF8880039A0C00 0003D3 (v01 PmRef Cpu0Cst 00003001 INTL 20120711) [ 0.289148] ACPI: Dynamic OEM Table Load: [ 0.289217] ACPI: SSDT 0xFFFF888003ADD800 0005AA (v01 PmRef ApIst 00003000 INTL 20120711) [ 0.289848] ACPI: Dynamic OEM Table Load: [ 0.289905] ACPI: SSDT 0xFFFF888003982600 000119 (v01 PmRef ApCst 00003000 INTL 20120711) [ 0.291084] ACPI: _OSC evaluated successfully for all CPUs [ 0.291576] ACPI: Interpreter enabled [ 0.291681] ACPI: PM: (supports S0 S5) [ 0.291736] ACPI: Using IOAPIC for interrupt routing [ 0.291822] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug [ 0.291902] PCI: Using E820 reservations for host bridge windows [ 0.292450] ACPI: Enabled 11 GPEs in block 00 to 3F [ 0.303361] ACPI: \_TZ_.FN00: New power resource [ 0.303481] ACPI: \_TZ_.FN01: New power resource [ 0.303577] ACPI: \_TZ_.FN02: New power resource [ 0.303673] ACPI: \_TZ_.FN03: New power resource [ 0.303767] ACPI: \_TZ_.FN04: New power resource [ 0.304638] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-3e]) [ 0.304702] acpi PNP0A08:00: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI HPX-Type3] [ 0.305393] acpi PNP0A08:00: _OSC: OS now controls [PME PCIeCapability LTR] [ 0.305493] acpi PNP0A08:00: FADT indicates ASPM is unsupported, using BIOS configuration [ 0.305970] PCI host bridge to bus 0000:00 [ 0.306026] pci_bus 0000:00: root bus resource [io 0x0000-0x0cf7 window] [ 0.306105] pci_bus 0000:00: root bus resource [io 0x0d00-0xffff window] [ 0.306165] pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff window] [ 0.306241] pci_bus 0000:00: root bus resource [mem 0x000d4000-0x000e7fff window] [ 0.306299] pci_bus 0000:00: root bus resource [mem 0xdf200000-0xfeafffff window] [ 0.306375] pci_bus 0000:00: root bus resource [bus 00-3e] [ 0.306478] pci 0000:00:00.0: [8086:0c08] type 00 class 0x060000 conventional PCI endpoint [ 0.306820] pci 0000:00:01.0: [8086:0c01] type 01 class 0x060400 PCIe Root Port [ 0.306972] pci 0000:00:01.0: PCI bridge to [bus 01] [ 0.307218] pci 0000:00:01.0: PME# supported from D0 D3hot D3cold [ 0.307607] pci 0000:00:01.1: [8086:0c05] type 01 class 0x060400 PCIe Root Port [ 0.307759] pci 0000:00:01.1: PCI bridge to [bus 02] [ 0.307824] pci 0000:00:01.1: bridge window [io 0xe000-0xefff] [ 0.307888] pci 0000:00:01.1: bridge window [mem 0xf7d00000-0xf7dfffff] [ 0.308150] pci 0000:00:01.1: PME# supported from D0 D3hot D3cold [ 0.308537] pci 0000:00:01.2: [8086:0c09] type 01 class 0x060400 PCIe Root Port [ 0.308688] pci 0000:00:01.2: PCI bridge to [bus 03] [ 0.308753] pci 0000:00:01.2: bridge window [io 0xd000-0xdfff] [ 0.308817] pci 0000:00:01.2: bridge window [mem 0xf7c00000-0xf7cfffff] [ 0.309032] pci 0000:00:01.2: PME# supported from D0 D3hot D3cold [ 0.309426] pci 0000:00:02.0: [8086:041a] type 00 class 0x030000 conventional PCI endpoint [ 0.309650] pci 0000:00:02.0: BAR 0 [mem 0xf7800000-0xf7bfffff 64bit] [ 0.309739] pci 0000:00:02.0: BAR 2 [mem 0xe0000000-0xefffffff 64bit pref] [ 0.309818] pci 0000:00:02.0: BAR 4 [io 0xf000-0xf03f] [ 0.309928] pci 0000:00:02.0: Video device with shadowed ROM at [mem 0x000c0000-0x000dffff] [ 0.310224] pci 0000:00:03.0: [8086:0c0c] type 00 class 0x040300 PCIe Root Complex Integrated Endpoint [ 0.310343] pci 0000:00:03.0: BAR 0 [mem 0xf7e30000-0xf7e33fff 64bit] [ 0.310790] pci 0000:00:14.0: [8086:8c31] type 00 class 0x0c0330 conventional PCI endpoint [ 0.311023] pci 0000:00:14.0: BAR 0 [mem 0xf7e20000-0xf7e2ffff 64bit] [ 0.311354] pci 0000:00:14.0: PME# supported from D3hot D3cold [ 0.311605] pci 0000:00:16.0: [8086:8c3a] type 00 class 0x078000 conventional PCI endpoint [ 0.311748] pci 0000:00:16.0: BAR 0 [mem 0xf7e3c000-0xf7e3c00f 64bit] [ 0.312044] pci 0000:00:16.0: PME# supported from D0 D3hot D3cold [ 0.312237] pci 0000:00:16.3: [8086:8c3d] type 00 class 0x070002 conventional PCI endpoint [ 0.312348] pci 0000:00:16.3: BAR 0 [io 0xf0e0-0xf0e7] [ 0.312431] pci 0000:00:16.3: BAR 1 [mem 0xf7e3a000-0xf7e3afff] [ 0.312890] pci 0000:00:19.0: [8086:153a] type 00 class 0x020000 conventional PCI endpoint [ 0.313017] pci 0000:00:19.0: BAR 0 [mem 0xf7e00000-0xf7e1ffff] [ 0.313103] pci 0000:00:19.0: BAR 1 [mem 0xf7e39000-0xf7e39fff] [ 0.313188] pci 0000:00:19.0: BAR 2 [io 0xf080-0xf09f] [ 0.313507] pci 0000:00:19.0: PME# supported from D0 D3hot D3cold [ 0.313799] pci 0000:00:1a.0: [8086:8c2d] type 00 class 0x0c0320 conventional PCI endpoint [ 0.313927] pci 0000:00:1a.0: BAR 0 [mem 0xf7e38000-0xf7e383ff] [ 0.314284] pci 0000:00:1a.0: PME# supported from D0 D3hot D3cold [ 0.314461] pci 0000:00:1c.0: [8086:8c10] type 01 class 0x060400 PCIe Root Port [ 0.314653] pci 0000:00:1c.0: PCI bridge to [bus 04] [ 0.314975] pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold [ 0.315095] pci 0000:00:1c.0: Enabling MPC IRBNCE [ 0.315155] pci 0000:00:1c.0: Intel PCH root port ACS workaround enabled [ 0.315545] pci 0000:00:1c.3: [8086:8c16] type 01 class 0x060400 PCIe Root Port [ 0.315728] pci 0000:00:1c.3: PCI bridge to [bus 05-06] [ 0.316034] pci 0000:00:1c.3: PME# supported from D0 D3hot D3cold [ 0.316151] pci 0000:00:1c.3: Enabling MPC IRBNCE [ 0.316211] pci 0000:00:1c.3: Intel PCH root port ACS workaround enabled [ 0.316617] pci 0000:00:1d.0: [8086:8c26] type 00 class 0x0c0320 conventional PCI endpoint [ 0.316746] pci 0000:00:1d.0: BAR 0 [mem 0xf7e37000-0xf7e373ff] [ 0.317084] pci 0000:00:1d.0: PME# supported from D0 D3hot D3cold [ 0.317317] pci 0000:00:1f.0: [8086:8c56] type 00 class 0x060100 conventional PCI endpoint [ 0.317875] pci 0000:00:1f.2: [8086:8c02] type 00 class 0x010601 conventional PCI endpoint [ 0.318003] pci 0000:00:1f.2: BAR 0 [io 0xf0d0-0xf0d7] [ 0.318325] pci 0000:00:1f.2: BAR 1 [io 0xf0c0-0xf0c3] [ 0.318408] pci 0000:00:1f.2: BAR 2 [io 0xf0b0-0xf0b7] [ 0.318491] pci 0000:00:1f.2: BAR 3 [io 0xf0a0-0xf0a3] [ 0.318574] pci 0000:00:1f.2: BAR 4 [io 0xf060-0xf07f] [ 0.318657] pci 0000:00:1f.2: BAR 5 [mem 0xf7e36000-0xf7e367ff] [ 0.318948] pci 0000:00:1f.2: PME# supported from D3hot [ 0.319151] pci 0000:00:1f.3: [8086:8c22] type 00 class 0x0c0500 conventional PCI endpoint [ 0.319294] pci 0000:00:1f.3: BAR 0 [mem 0xf7e35000-0xf7e350ff 64bit] [ 0.319432] pci 0000:00:1f.3: BAR 4 [io 0x0580-0x059f] [ 0.319713] pci 0000:00:01.0: PCI bridge to [bus 01] [ 0.319923] pci 0000:02:00.0: working around ROM BAR overlap defect [ 0.319982] pci 0000:02:00.0: [8086:1533] type 00 class 0x020000 PCIe Endpoint [ 0.320149] pci 0000:02:00.0: BAR 0 [mem 0xf7d00000-0xf7d7ffff] [ 0.320318] pci 0000:02:00.0: BAR 2 [io 0xe000-0xe01f] [ 0.320412] pci 0000:02:00.0: BAR 3 [mem 0xf7d80000-0xf7d83fff] [ 0.320744] pci 0000:02:00.0: PME# supported from D0 D3hot D3cold [ 0.321098] pci 0000:00:01.1: PCI bridge to [bus 02] [ 0.321345] pci 0000:03:00.0: working around ROM BAR overlap defect [ 0.321404] pci 0000:03:00.0: [8086:1533] type 00 class 0x020000 PCIe Endpoint [ 0.321613] pci 0000:03:00.0: BAR 0 [mem 0xf7c00000-0xf7c7ffff] [ 0.321723] pci 0000:03:00.0: BAR 2 [io 0xd000-0xd01f] [ 0.321805] pci 0000:03:00.0: BAR 3 [mem 0xf7c80000-0xf7c83fff] [ 0.322110] pci 0000:03:00.0: PME# supported from D0 D3hot D3cold [ 0.322419] pci 0000:00:01.2: PCI bridge to [bus 03] [ 0.322605] pci 0000:00:1c.0: PCI bridge to [bus 04] [ 0.322894] pci 0000:05:00.0: [1283:8893] type 01 class 0x060401 conventional PCI bridge [ 0.323216] pci 0000:05:00.0: PCI bridge to [bus 06] (subtractive decode) [ 0.323630] pci 0000:05:00.0: supports D1 D2 [ 0.323685] pci 0000:05:00.0: PME# supported from D0 D1 D2 D3hot D3cold [ 0.323916] pci 0000:00:1c.3: PCI bridge to [bus 05-06] [ 0.324095] pci_bus 0000:06: extended config space not accessible [ 0.324376] pci 0000:05:00.0: PCI bridge to [bus 06] (subtractive decode) [ 0.324619] pci_bus 0000:00: on NUMA node 0 [ 0.324767] xen: registering gsi 13 triggering 1 polarity 0 [ 0.325507] ACPI: PCI: Interrupt link LNKA configured for IRQ 11 [ 0.325642] ACPI: PCI: Interrupt link LNKB configured for IRQ 10 [ 0.325758] ACPI: PCI: Interrupt link LNKC configured for IRQ 5 [ 0.325865] ACPI: PCI: Interrupt link LNKD configured for IRQ 3 [ 0.325971] ACPI: PCI: Interrupt link LNKE configured for IRQ 11 [ 0.326075] ACPI: PCI: Interrupt link LNKF configured for IRQ 0 [ 0.326134] ACPI: PCI: Interrupt link LNKF disabled [ 0.326236] ACPI: PCI: Interrupt link LNKG configured for IRQ 0 [ 0.326307] ACPI: PCI: Interrupt link LNKG disabled [ 0.326431] ACPI: PCI: Interrupt link LNKH configured for IRQ 10 [ 0.326798] xen:balloon: Initialising balloon driver [ 0.326876] iommu: Default domain type: Translated [ 0.326876] iommu: DMA domain TLB invalidation policy: lazy mode [ 0.326876] SCSI subsystem initialized [ 0.327309] libata version 3.00 loaded. [ 0.327325] ACPI: bus type USB registered [ 0.327400] usbcore: registered new interface driver usbfs [ 0.327462] usbcore: registered new interface driver hub [ 0.327523] usbcore: registered new device driver usb [ 0.327589] pps_core: LinuxPPS API ver. 1 registered [ 0.327646] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti [ 0.327728] PTP clock support registered [ 0.327798] Advanced Linux Sound Architecture Driver Initialized. [ 0.327798] NetLabel: Initializing [ 0.327798] NetLabel: domain hash size = 128 [ 0.328299] NetLabel: protocols = UNLABELED CIPSOv4 CALIPSO [ 0.328407] NetLabel: unlabeled traffic allowed by default [ 0.328483] PCI: Using ACPI for IRQ routing [ 0.335667] PCI: pci_cache_line_size set to 64 bytes [ 0.335846] e820: reserve RAM buffer [mem 0x0009d000-0x0009ffff] [ 0.335848] e820: reserve RAM buffer [mem 0x20063000-0x23ffffff] [ 0.335872] pci 0000:00:02.0: vgaarb: setting as boot VGA device [ 0.335872] pci 0000:00:02.0: vgaarb: bridge control possible [ 0.335872] pci 0000:00:02.0: vgaarb: VGA device added: decodes=io+mem,owns=io+mem,locks=none [ 0.335872] vgaarb: loaded [ 0.336504] clocksource: Switched to clocksource tsc-early [ 0.336725] VFS: Disk quotas dquot_6.6.0 [ 0.336813] VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes) [ 0.336897] hugetlbfs: disabling because there are no supported hugepage sizes [ 0.336984] pnp: PnP ACPI init [ 0.337201] system 00:00: [io 0x0680-0x069f] has been reserved [ 0.337266] system 00:00: [io 0xffff] has been reserved [ 0.337266] system 00:00: [io 0xffff] has been reserved [ 0.337266] system 00:00: [io 0xffff] has been reserved [ 0.337266] system 00:00: [io 0x1c00-0x1cfe] has been reserved [ 0.337310] system 00:00: [io 0x1d00-0x1dfe] has been reserved [ 0.337371] system 00:00: [io 0x1e00-0x1efe] has been reserved [ 0.337432] system 00:00: [io 0x1f00-0x1ffe] has been reserved [ 0.337492] system 00:00: [io 0x1800-0x18fe] has been reserved [ 0.337553] system 00:00: [io 0x164e-0x164f] has been reserved [ 0.337625] xen: registering gsi 8 triggering 1 polarity 0 [ 0.337674] system 00:02: [io 0x1854-0x1857] has been reserved [ 0.337932] system 00:03: [io 0x0a00-0x0a2f] has been reserved [ 0.337995] system 00:03: [io 0x0a30-0x0a3f] has been reserved [ 0.338055] system 00:03: [io 0x0a40-0x0a4f] has been reserved [ 0.338127] system 00:04: [io 0x04d0-0x04d1] has been reserved [ 0.338420] xen: registering gsi 4 triggering 1 polarity 0 [ 0.338422] Already setup the GSI :4 [ 0.338477] pnp 00:05: [dma 0 disabled] [ 0.339204] system 00:07: [mem 0xfed1c000-0xfed1ffff] has been reserved [ 0.339267] system 00:07: [mem 0xfed10000-0xfed17fff] has been reserved [ 0.339356] system 00:07: [mem 0xfed18000-0xfed18fff] has been reserved [ 0.339417] system 00:07: [mem 0xfed19000-0xfed19fff] has been reserved [ 0.339478] system 00:07: [mem 0xf8000000-0xfbffffff] has been reserved [ 0.339538] system 00:07: [mem 0xfed20000-0xfed3ffff] has been reserved [ 0.339599] system 00:07: [mem 0xfed90000-0xfed93fff] could not be reserved [ 0.339661] system 00:07: [mem 0xfed45000-0xfed8ffff] has been reserved [ 0.339722] system 00:07: [mem 0xff000000-0xffffffff] has been reserved [ 0.339782] system 00:07: [mem 0xfee00000-0xfeefffff] has been reserved [ 0.339843] system 00:07: [mem 0xf7fdf000-0xf7fdffff] has been reserved [ 0.339904] system 00:07: [mem 0xf7fe0000-0xf7feffff] has been reserved [ 0.340214] pnp: PnP ACPI: found 8 devices [ 0.359739] PM-Timer failed consistency check (0xffffff) - aborting. [ 0.359819] NET: Registered PF_INET protocol family [ 0.359901] IP idents hash table entries: 8192 (order: 4, 65536 bytes, linear) [ 0.360158] tcp_listen_portaddr_hash hash table entries: 256 (order: 0, 4096 bytes, linear) [ 0.360240] Table-perturb hash table entries: 65536 (order: 6, 262144 bytes, linear) [ 0.360362] TCP established hash table entries: 4096 (order: 3, 32768 bytes, linear) [ 0.360444] TCP bind hash table entries: 4096 (order: 5, 131072 bytes, linear) [ 0.360538] TCP: Hash tables configured (established 4096 bind 4096) [ 0.360610] UDP hash table entries: 256 (order: 1, 8192 bytes, linear) [ 0.360673] UDP-Lite hash table entries: 256 (order: 1, 8192 bytes, linear) [ 0.360751] NET: Registered PF_UNIX/PF_LOCAL protocol family [ 0.360968] RPC: Registered named UNIX socket transport module. [ 0.361033] RPC: Registered udp transport module. [ 0.361091] RPC: Registered tcp transport module. [ 0.361148] RPC: Registered tcp-with-tls transport module. [ 0.361206] RPC: Registered tcp NFSv4.1 backchannel transport module. [ 0.361576] pci 0000:00:01.0: PCI bridge to [bus 01] [ 0.361664] pci 0000:00:01.1: PCI bridge to [bus 02] [ 0.361726] pci 0000:00:01.1: bridge window [io 0xe000-0xefff] [ 0.361796] pci 0000:00:01.1: bridge window [mem 0xf7d00000-0xf7dfffff] [ 0.361876] pci 0000:00:01.2: PCI bridge to [bus 03] [ 0.361937] pci 0000:00:01.2: bridge window [io 0xd000-0xdfff] [ 0.362007] pci 0000:00:01.2: bridge window [mem 0xf7c00000-0xf7cfffff] [ 0.362086] pci 0000:00:1c.0: PCI bridge to [bus 04] [ 0.362181] pci 0000:05:00.0: PCI bridge to [bus 06] [ 0.362283] pci 0000:00:1c.3: PCI bridge to [bus 05-06] [ 0.362393] pci_bus 0000:00: resource 4 [io 0x0000-0x0cf7 window] [ 0.362453] pci_bus 0000:00: resource 5 [io 0x0d00-0xffff window] [ 0.362513] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff window] [ 0.362575] pci_bus 0000:00: resource 7 [mem 0x000d4000-0x000e7fff window] [ 0.362636] pci_bus 0000:00: resource 8 [mem 0xdf200000-0xfeafffff window] [ 0.362763] pci_bus 0000:02: resource 0 [io 0xe000-0xefff] [ 0.362821] pci_bus 0000:02: resource 1 [mem 0xf7d00000-0xf7dfffff] [ 0.362882] pci_bus 0000:03: resource 0 [io 0xd000-0xdfff] [ 0.362940] pci_bus 0000:03: resource 1 [mem 0xf7c00000-0xf7cfffff] [ 0.363111] xen: registering gsi 16 triggering 0 polarity 1 [ 0.363128] xen: --> pirq=16 -> irq=16 (gsi=16) [ 0.363367] xen: registering gsi 17 triggering 0 polarity 1 [ 0.363382] xen: --> pirq=17 -> irq=17 (gsi=17) [ 0.380416] pci 0000:00:1a.0: quirk_usb_early_handoff+0x0/0x7c0 took 16693 usecs [ 0.380549] xen: registering gsi 23 triggering 0 polarity 1 [ 0.380563] xen: --> pirq=23 -> irq=23 (gsi=23) [ 0.397416] pci 0000:00:1d.0: quirk_usb_early_handoff+0x0/0x7c0 took 16505 usecs [ 0.397542] PCI: CLS 64 bytes, default 64 [ 0.397622] PCI-DMA: Using software bounce buffering for IO (SWIOTLB) [ 0.397667] Unpacking initramfs... [ 0.397681] software IO TLB: mapped [mem 0x000000001b180000-0x000000001f180000] (64MB) [ 0.397898] kvm_intel: VMX not supported by CPU 0 [ 0.397954] kvm_amd: CPU 0 isn't AMD or Hygon [ 0.398011] clocksource: tsc: mask: 0xffffffffffffffff max_cycles: 0x2e050166e04, max_idle_ns: 440795273449 ns [ 0.398145] clocksource: Switched to clocksource tsc [ 0.402034] Initialise system trusted keyrings [ 0.402188] workingset: timestamp_bits=62 max_order=17 bucket_order=0 [ 0.402384] NFS: Registering the id_resolver key type [ 0.402452] Key type id_resolver registered [ 0.402509] Key type id_legacy registered [ 0.402606] 9p: Installing v9fs 9p2000 file system support [ 0.413690] Key type asymmetric registered [ 0.413758] Asymmetric key parser 'x509' registered [ 0.413835] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 251) [ 0.413920] io scheduler mq-deadline registered [ 0.413976] io scheduler kyber registered [ 0.414270] xen: registering gsi 16 triggering 0 polarity 1 [ 0.414277] Already setup the GSI :16 [ 0.414520] pcieport 0000:00:01.0: PME: Signaling with IRQ 50 [ 0.414739] xen: registering gsi 16 triggering 0 polarity 1 [ 0.414744] Already setup the GSI :16 [ 0.414901] pcieport 0000:00:01.1: PME: Signaling with IRQ 51 [ 0.415104] xen: registering gsi 16 triggering 0 polarity 1 [ 0.415107] Already setup the GSI :16 [ 0.415263] pcieport 0000:00:01.2: PME: Signaling with IRQ 52 [ 0.415493] xen: registering gsi 16 triggering 0 polarity 1 [ 0.415496] Already setup the GSI :16 [ 0.415682] pcieport 0000:00:1c.0: PME: Signaling with IRQ 53 [ 0.415921] xen: registering gsi 19 triggering 0 polarity 1 [ 0.415934] xen: --> pirq=19 -> irq=19 (gsi=19) [ 0.416065] pcieport 0000:00:1c.3: PME: Signaling with IRQ 54 [ 0.416399] input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input0 [ 0.417155] ACPI: button: Power Button [PWRB] [ 0.417239] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input1 [ 0.417455] ACPI: button: Power Button [PWRF] [ 0.417769] Monitor-Mwait will be used to enter C-1 state [ 0.417795] Monitor-Mwait will be used to enter C-2 state [ 0.417805] ACPI: \_PR_.CPU0: Found 2 idle states [ 0.417970] ACPI: \_PR_.CPU1: Found 2 idle states [ 0.418172] ACPI: \_PR_.CPU2: Found 2 idle states [ 0.418417] ACPI: \_PR_.CPU3: Found 2 idle states [ 0.418836] thermal LNXTHERM:00: registered as thermal_zone0 [ 0.418898] ACPI: thermal: Thermal Zone [TZ00] (28 C) [ 0.419157] thermal LNXTHERM:01: registered as thermal_zone1 [ 0.419218] ACPI: thermal: Thermal Zone [TZ01] (30 C) [ 0.419511] xen:xen_evtchn: Event-channel device installed [ 0.419636] xen_pciback: backend is vpci [ 0.420069] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled [ 0.420543] xen: registering gsi 19 triggering 0 polarity 1 [ 0.420549] Already setup the GSI :19 [ 0.420841] 0000:00:16.3: ttyS0 at I/O 0xf0e0 (irq = 19, base_baud = 115200) is a 16550A [ 0.421115] hpet_acpi_add: no address or irqs in _CRS [ 0.421222] Non-volatile memory driver v1.3 [ 0.422354] loop: module loaded [ 0.425482] ahci 0000:00:1f.2: version 3.0 [ 0.425593] xen: registering gsi 19 triggering 0 polarity 1 [ 0.425600] Already setup the GSI :19 [ 0.425602] xen: registering gsi 16 triggering 0 polarity 1 [ 0.425670] Already setup the GSI :16 [ 0.425775] ahci 0000:00:1f.2: AHCI vers 0001.0300, 32 command slots, 6 Gbps, SATA mode [ 0.425874] ahci 0000:00:1f.2: 5/5 ports implemented (port mask 0x1f) [ 0.425938] ahci 0000:00:1f.2: flags: 64bit ncq pm led clo pio slum part ems apst [ 0.439030] scsi host0: ahci [ 0.439334] scsi host1: ahci [ 0.439593] scsi host2: ahci [ 0.439775] scsi host3: ahci [ 0.439953] scsi host4: ahci [ 0.440033] ata1: SATA max UDMA/133 abar m2048@0xf7e36000 port 0xf7e36100 irq 56 lpm-pol 0 [ 0.440116] ata2: SATA max UDMA/133 abar m2048@0xf7e36000 port 0xf7e36180 irq 56 lpm-pol 0 [ 0.440197] ata3: SATA max UDMA/133 abar m2048@0xf7e36000 port 0xf7e36200 irq 56 lpm-pol 0 [ 0.440278] ata4: SATA max UDMA/133 abar m2048@0xf7e36000 port 0xf7e36280 irq 56 lpm-pol 0 [ 0.440370] ata5: SATA max UDMA/133 abar m2048@0xf7e36000 port 0xf7e36300 irq 56 lpm-pol 0 [ 0.440640] tun: Universal TUN/TAP device driver, 1.6 [ 0.440768] e100: Intel(R) PRO/100 Network Driver [ 0.440891] e100: Copyright(c) 1999-2006 Intel Corporation [ 0.440956] sky2: driver version 1.30 [ 0.441031] xen_netfront: Initialising Xen virtual ethernet driver [ 0.441334] xen: registering gsi 17 triggering 0 polarity 1 [ 0.441349] Already setup the GSI :17 [ 0.441407] xen: registering gsi 16 triggering 0 polarity 1 [ 0.441411] Already setup the GSI :16 [ 0.441416] xen: registering gsi 23 triggering 0 polarity 1 [ 0.441462] ehci-pci 0000:00:1a.0: EHCI Host Controller [ 0.441504] ehci-pci 0000:00:1a.0: new USB bus registered, assigned bus number 1 [ 0.441549] Already setup the GSI :23 [ 0.441657] ehci-pci 0000:00:1a.0: debug port 2 [ 0.445733] ehci-pci 0000:00:1a.0: irq 17, io mem 0xf7e38000 [ 0.452384] ehci-pci 0000:00:1a.0: USB 2.0 started, EHCI 1.00 [ 0.452594] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 6.10 [ 0.452677] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 0.452755] usb usb1: Product: EHCI Host Controller [ 0.452812] usb usb1: Manufacturer: Linux 6.10.0-rc5+ ehci_hcd [ 0.452871] usb usb1: SerialNumber: 0000:00:1a.0 [ 0.453112] hub 1-0:1.0: USB hub found [ 0.453179] hub 1-0:1.0: 3 ports detected [ 0.453457] xhci_hcd 0000:00:14.0: xHCI Host Controller [ 0.453626] xhci_hcd 0000:00:14.0: new USB bus registered, assigned bus number 2 [ 0.454773] xhci_hcd 0000:00:14.0: hcc params 0x200077c1 hci version 0x100 quirks 0x0000000000009810 [ 0.455097] ehci-pci 0000:00:1d.0: EHCI Host Controller [ 0.455104] xhci_hcd 0000:00:14.0: xHCI Host Controller [ 0.455258] ehci-pci 0000:00:1d.0: new USB bus registered, assigned bus number 3 [ 0.455286] xhci_hcd 0000:00:14.0: new USB bus registered, assigned bus number 4 [ 0.455371] ehci-pci 0000:00:1d.0: debug port 2 [ 0.455428] xhci_hcd 0000:00:14.0: Host supports USB 3.0 SuperSpeed [ 0.455663] usb usb2: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 6.10 [ 0.455801] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 0.455934] usb usb2: Product: xHCI Host Controller [ 0.456029] usb usb2: Manufacturer: Linux 6.10.0-rc5+ xhci-hcd [ 0.456187] usb usb2: SerialNumber: 0000:00:14.0 [ 0.456426] hub 2-0:1.0: USB hub found [ 0.456545] hub 2-0:1.0: 15 ports detected [ 0.459423] ehci-pci 0000:00:1d.0: irq 23, io mem 0xf7e37000 [ 0.460796] usb usb4: New USB device found, idVendor=1d6b, idProduct=0003, bcdDevice= 6.10 [ 0.460876] usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 0.460952] usb usb4: Product: xHCI Host Controller [ 0.461007] usb usb4: Manufacturer: Linux 6.10.0-rc5+ xhci-hcd [ 0.461065] usb usb4: SerialNumber: 0000:00:14.0 [ 0.461242] hub 4-0:1.0: USB hub found [ 0.461311] hub 4-0:1.0: 6 ports detected [ 0.462590] usbcore: registered new interface driver usblp [ 0.462658] usbcore: registered new interface driver usb-storage [ 0.462738] i8042: PNP: No PS/2 controller found. [ 0.462956] rtc_cmos 00:01: RTC can wake from S4 [ 0.463527] rtc_cmos 00:01: registered as rtc0 [ 0.463620] rtc_cmos 00:01: alarms up to one month, y3k, 242 bytes nvram [ 0.463713] device-mapper: uevent: version 1.0.3 [ 0.463774] xen: registering gsi 18 triggering 0 polarity 1 [ 0.463807] xen: --> pirq=18 -> irq=18 (gsi=18) [ 0.463840] device-mapper: ioctl: 4.48.0-ioctl (2023-03-01) initialised: dm-devel@lists.linux.dev [ 0.463885] i801_smbus 0000:00:1f.3: SMBus using PCI interrupt [ 0.463934] intel_pstate: CPU model not supported [ 0.464069] hid: raw HID events driver (C) Jiri Kosina [ 0.464216] usbcore: registered new interface driver usbhid [ 0.464279] usbhid: USB HID core driver [ 0.464732] xen: registering gsi 16 triggering 0 polarity 1 [ 0.464738] Already setup the GSI :16 [ 0.464804] snd_hda_intel 0000:00:03.0: Haswell/Broadwell HDMI/DP must build in CONFIG_SND_HDA_I915 [ 0.465143] Initializing XFRM netlink socket [ 0.465237] NET: Registered PF_INET6 protocol family [ 0.465295] i2c i2c-0: Successfully instantiated SPD at 0x51 [ 0.465558] Segment Routing with IPv6 [ 0.465624] In-situ OAM (IOAM) with IPv6 [ 0.465702] sit: IPv6, IPv4 and MPLS over IPv4 tunneling driver [ 0.465855] i2c i2c-0: Successfully instantiated SPD at 0x53 [ 0.465877] NET: Registered PF_PACKET protocol family [ 0.465993] 9pnet: Installing 9P2000 support [ 0.466078] Key type dns_resolver registered [ 0.466334] IPI shorthand broadcast: enabled [ 0.466352] ehci-pci 0000:00:1d.0: USB 2.0 started, EHCI 1.00 [ 0.466572] usb usb3: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 6.10 [ 0.466657] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 0.466736] usb usb3: Product: EHCI Host Controller [ 0.466794] usb usb3: Manufacturer: Linux 6.10.0-rc5+ ehci_hcd [ 0.466855] usb usb3: SerialNumber: 0000:00:1d.0 [ 0.467095] hub 3-0:1.0: USB hub found [ 0.467218] hub 3-0:1.0: 3 ports detected [ 0.467685] snd_hda_intel 0000:00:03.0: Cannot probe codecs, giving up [ 0.468779] sched_clock: Marking stable (448004086, 20336455)->(470390686, -2050145) [ 0.469129] Timer migration: 1 hierarchy levels; 8 children per group; 1 crossnode level [ 0.469408] registered taskstats version 1 [ 0.469465] Loading compiled-in X.509 certificates [ 0.470457] PM: Magic number: 12:54:899 [ 0.470589] printk: legacy console [netcon0] enabled [ 0.470648] netconsole: network logging started [ 0.470892] cfg80211: Loading compiled-in X.509 certificates for regulatory database [ 0.472657] Freeing initrd memory: 20116K [ 0.480419] Loaded X.509 cert 'sforshee: 00b28ddf47aef9cea7' [ 0.480640] Loaded X.509 cert 'wens: 61c038651aabdcf94bd0ac7ff06c7248db18c600' [ 0.480742] ALSA device list: [ 0.480804] No soundcards found. [ 0.481249] cfg80211: loaded regulatory.db is malformed or signature is missing/invalid [ 0.690405] usb 1-1: new high-speed USB device number 2 using ehci-pci [ 0.706456] usb 3-1: new high-speed USB device number 2 using ehci-pci [ 0.750127] ata1: SATA link up 6.0 Gbps (SStatus 133 SControl 300) [ 0.750219] ata5: SATA link up 1.5 Gbps (SStatus 113 SControl 300) [ 0.750294] ata2: SATA link down (SStatus 0 SControl 300) [ 0.750627] ata4: SATA link down (SStatus 0 SControl 300) [ 0.750713] ata3: SATA link down (SStatus 0 SControl 300) [ 0.751140] ata1.00: ATA-9: ST1000NM0033-9ZM173, LV5B, max UDMA/133 [ 0.751814] ata1.00: NCQ Send/Recv Log not supported [ 0.751871] ata1.00: 1953525168 sectors, multi 16: LBA48 NCQ (depth 32), AA [ 0.753171] ata1.00: NCQ Send/Recv Log not supported [ 0.753239] ata1.00: configured for UDMA/133 [ 0.753416] scsi 0:0:0:0: Direct-Access ATA ST1000NM0033-9ZM LV5B PQ: 0 ANSI: 5 [ 0.753879] sd 0:0:0:0: Attached scsi generic sg0 type 0 [ 0.753900] sd 0:0:0:0: [sda] 1953525168 512-byte logical blocks: (1.00 TB/932 GiB) [ 0.754040] sd 0:0:0:0: [sda] Write Protect is off [ 0.754107] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00 [ 0.754124] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 0.754306] sd 0:0:0:0: [sda] Preferred minimum I/O size 512 bytes [ 0.756317] ata5.00: ACPI cmd f5/00:00:00:00:00:00(SECURITY FREEZE LOCK) filtered out [ 0.756876] ata5.00: ACPI cmd b1/c1:00:00:00:00:00(DEVICE CONFIGURATION OVERLAY) filtered out [ 0.760543] sda: sda1 sda2 < sda5 > [ 0.760849] sd 0:0:0:0: [sda] Attached SCSI disk [ 0.763830] ata5.00: ATAPI: PLDS DVD-RW DU8A5SH, BL61, max UDMA/100 [ 0.775898] ata5.00: ACPI cmd f5/00:00:00:00:00:00(SECURITY FREEZE LOCK) filtered out [ 0.775978] ata5.00: ACPI cmd b1/c1:00:00:00:00:00(DEVICE CONFIGURATION OVERLAY) filtered out [ 0.781686] ata5.00: configured for UDMA/100 [ 0.789263] scsi 4:0:0:0: CD-ROM PLDS DVD-RW DU8A5SH BL61 PQ: 0 ANSI: 5 [ 0.815209] sr 4:0:0:0: [sr0] scsi3-mmc drive: 24x/24x writer dvd-ram cd/rw xa/form2 cdda tray [ 0.815359] cdrom: Uniform CD-ROM driver Revision: 3.20 [ 0.818897] usb 1-1: New USB device found, idVendor=8087, idProduct=8008, bcdDevice= 0.04 [ 0.818990] usb 1-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0 [ 0.819314] hub 1-1:1.0: USB hub found [ 0.819509] hub 1-1:1.0: 6 ports detected [ 0.833672] sr 4:0:0:0: Attached scsi CD-ROM sr0 [ 0.833731] sr 4:0:0:0: Attached scsi generic sg1 type 5 [ 0.834771] usb 3-1: New USB device found, idVendor=8087, idProduct=8000, bcdDevice= 0.04 [ 0.834853] usb 3-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0 [ 0.835091] Freeing unused kernel image (initmem) memory: 2680K [ 0.835124] hub 3-1:1.0: USB hub found [ 0.835164] Write protecting the kernel read-only data: 24576k [ 0.835344] hub 3-1:1.0: 8 ports detected [ 0.847455] Freeing unused kernel image (rodata/data gap) memory: 2028K [ 0.909749] x86/mm: Checked W+X mappings: passed, no W+X pages found. [ 0.909811] Run /init as init process [ 0.909864] with arguments: [ 0.909865] /init [ 0.909865] placeholder [ 0.909866] with environment: [ 0.909867] HOME=/ [ 0.909867] TERM=linux [ 1.110176] igb: Intel(R) Gigabit Ethernet Network Driver [ 1.110248] igb: Copyright (c) 2007-2014 Intel Corporation. [ 1.110423] xen: registering gsi 17 triggering 0 polarity 1 [ 1.110430] Already setup the GSI :17 [ 1.115784] e1000e: Intel(R) PRO/1000 Network Driver [ 1.115849] e1000e: Copyright(c) 1999 - 2015 Intel Corporation. [ 1.115999] xen: registering gsi 20 triggering 0 polarity 1 [ 1.116019] xen: --> pirq=20 -> irq=20 (gsi=20) [ 1.116184] e1000e 0000:00:19.0: Interrupt Throttling Rate (ints/sec) set to dynamic conservative mode [ 1.138765] pps pps0: new PPS source ptp0 [ 1.138868] igb 0000:02:00.0: added PHC on eth0 [ 1.138953] igb 0000:02:00.0: Intel(R) Gigabit Ethernet Network Connection [ 1.139016] igb 0000:02:00.0: eth0: (PCIe:2.5Gb/s:Width x1) 44:39:c4:6d:20:4d [ 1.139123] igb 0000:02:00.0: eth0: PBA No: 000300-000 [ 1.139182] igb 0000:02:00.0: Using MSI-X interrupts. 4 rx queue(s), 4 tx queue(s) [ 1.139350] xen: registering gsi 18 triggering 0 polarity 1 [ 1.139356] Already setup the GSI :18 [ 1.167265] pps pps1: new PPS source ptp1 [ 1.167473] igb 0000:03:00.0: added PHC on eth1 [ 1.167565] igb 0000:03:00.0: Intel(R) Gigabit Ethernet Network Connection [ 1.167626] igb 0000:03:00.0: eth1: (PCIe:2.5Gb/s:Width x1) 44:39:c4:6d:20:4e [ 1.167738] igb 0000:03:00.0: eth1: PBA No: 000300-000 [ 1.167796] igb 0000:03:00.0: Using MSI-X interrupts. 4 rx queue(s), 4 tx queue(s) [ 1.169028] igb 0000:02:00.0 enx4439c46d204d: renamed from eth0 [ 1.170758] igb 0000:03:00.0 enx4439c46d204e: renamed from eth1 [ 1.187951] e1000e 0000:00:19.0 0000:00:19.0 (uninitialized): registered PHC clock [ 1.250138] e1000e 0000:00:19.0 eth0: (PCI Express:2.5GT/s:Width x1) 44:39:c4:39:a1:26 [ 1.250234] e1000e 0000:00:19.0 eth0: Intel(R) PRO/1000 Network Connection [ 1.250355] e1000e 0000:00:19.0 eth0: MAC: 11, PHY: 12, PBA No: FFFFFF-0FF [ 1.251585] e1000e 0000:00:19.0 enx4439c439a126: renamed from eth0 [ 1.806177] EXT4-fs (dm-0): mounting ext3 file system using the ext4 subsystem [ 1.816973] EXT4-fs (dm-0): mounted filesystem 0b00c0db-d54c-4d55-aefb-ea2e7658a3e1 ro with ordered data mode. Quota mode: none. [ 4.341267] EXT4-fs (dm-0): re-mounted 0b00c0db-d54c-4d55-aefb-ea2e7658a3e1 r/w. Quota mode: none. [ 5.407645] EXT4-fs (sda1): mounting ext3 file system using the ext4 subsystem [ 5.422100] EXT4-fs (sda1): mounted filesystem 1442538f-0a0e-4749-925b-c2353e05a090 r/w with ordered data mode. Quota mode: none. [ 5.480652] Adding 1949692k swap on /dev/mapper/huxelrebe0--vg-swap_1. Priority:-2 extents:1 across:1949692k [ 6.973238] xenbr0: port 1(enx4439c46d204e) entered blocking state [ 6.973345] xenbr0: port 1(enx4439c46d204e) entered disabled state [ 6.973470] igb 0000:03:00.0 enx4439c46d204e: entered allmulticast mode [ 6.973563] igb 0000:03:00.0 enx4439c46d204e: entered promiscuous mode [ 9.923832] igb 0000:03:00.0 enx4439c46d204e: igb: enx4439c46d204e NIC Link is Up 1000 Mbps Full Duplex, Flow Control: RX [ 10.032571] xenbr0: port 1(enx4439c46d204e) entered blocking state [ 10.032699] xenbr0: port 1(enx4439c46d204e) entered forwarding state