[ 0.000000] microcode: microcode updated early to revision 0x42e, date = 2019-03-14 [ 0.000000] Linux version 6.1.0-21-amd64 (debian-kernel@lists.debian.org) (gcc-12 (Debian 12.2.0-14) 12.2.0, GNU ld (GNU Binutils for Debian) 2.40) #1 SMP PREEMPT_DYNAMIC Debian 6.1.90-1 (2024-05-03) [ 0.000000] Command line: BOOT_IMAGE=/vmlinuz-6.1.0-21-amd64 root=/dev/mapper/fiano0--vg-root ro console=ttyS0,115200n8 [ 0.000000] BIOS-provided physical RAM map: [ 0.000000] BIOS-e820: [mem 0x0000000000000000-0x000000000009abff] usable [ 0.000000] BIOS-e820: [mem 0x000000000009ac00-0x000000000009ffff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000000e0000-0x00000000000fffff] reserved [ 0.000000] BIOS-e820: [mem 0x0000000000100000-0x000000007de2bfff] usable [ 0.000000] BIOS-e820: [mem 0x000000007de2c000-0x000000007debafff] reserved [ 0.000000] BIOS-e820: [mem 0x000000007debb000-0x000000007dfc3fff] ACPI data [ 0.000000] BIOS-e820: [mem 0x000000007dfc4000-0x000000007e1e0fff] ACPI NVS [ 0.000000] BIOS-e820: [mem 0x000000007e1e1000-0x000000007f36afff] reserved [ 0.000000] BIOS-e820: [mem 0x000000007f36b000-0x000000007f7fffff] ACPI NVS [ 0.000000] BIOS-e820: [mem 0x0000000080000000-0x000000008fffffff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000fed1c000-0x00000000fed3ffff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000ff000000-0x00000000ffffffff] reserved [ 0.000000] BIOS-e820: [mem 0x0000000100000000-0x000000027fffffff] usable [ 0.000000] NX (Execute Disable) protection: active [ 0.000000] SMBIOS 2.7 present. [ 0.000000] DMI: Supermicro X9DBL-3F/X9DBL-iF/X9DBL-3F/X9DBL-iF, BIOS 3.00 12/06/2013 [ 0.000000] tsc: Fast TSC calibration using PIT [ 0.000000] tsc: Detected 1800.064 MHz processor [ 0.000874] e820: update [mem 0x00000000-0x00000fff] usable ==> reserved [ 0.000878] e820: remove [mem 0x000a0000-0x000fffff] usable [ 0.000889] last_pfn = 0x280000 max_arch_pfn = 0x400000000 [ 0.001028] x86/PAT: Configuration [0-7]: WB WC UC- UC WB WP UC- WT [ 0.001678] e820: update [mem 0x80000000-0xffffffff] usable ==> reserved [ 0.001687] last_pfn = 0x7de2c max_arch_pfn = 0x400000000 [ 0.018709] found SMP MP-table at [mem 0x000fd8e0-0x000fd8ef] [ 0.018734] Using GB pages for direct mapping [ 0.018949] RAMDISK: [mem 0x3329b000-0x35944fff] [ 0.018957] ACPI: Early table checksum verification disabled [ 0.018961] ACPI: RSDP 0x00000000000F04A0 000024 (v02 SUPERM) [ 0.018968] ACPI: XSDT 0x000000007DEF1088 00008C (v01 SUPERM SMCI--MB 00000001 AMI 00010013) [ 0.018976] ACPI: FACP 0x000000007DEFBAB0 0000F4 (v04 SUPERM SMCI--MB 00000001 AMI 00010013) [ 0.018985] ACPI: DSDT 0x000000007DEF11A0 00A910 (v02 SUPERM SMCI--MB 00000000 INTL 20091112) [ 0.018990] ACPI: FACS 0x000000007E1D8080 000040 [ 0.018994] ACPI: APIC 0x000000007DEFBBA8 000090 (v03 00000001 AMI 00010013) [ 0.019000] ACPI: FPDT 0x000000007DEFBC38 000044 (v01 00000001 AMI 00010013) [ 0.019005] ACPI: HPET 0x000000007DEFBC80 000038 (v01 SUPERM SMCI--MB 00000001 AMI. 00000005) [ 0.019010] ACPI: PRAD 0x000000007DEFBCB8 0000BE (v02 PRADID PRADTID 00000001 MSFT 04000000) [ 0.019015] ACPI: SPMI 0x000000007DEFBD78 000040 (v05 A M I OEMSPMI 00000000 AMI. 00000000) [ 0.019020] ACPI: SSDT 0x000000007DEFBDB8 0C7AE8 (v02 INTEL CpuPm 00004000 INTL 20091112) [ 0.019025] ACPI: EINJ 0x000000007DFC38A0 000130 (v01 AMI AMI EINJ 00000000 00000000) [ 0.019030] ACPI: ERST 0x000000007DFC39D0 000230 (v01 AMIER AMI ERST 00000000 00000000) [ 0.019035] ACPI: HEST 0x000000007DFC3C00 0000A8 (v01 AMI AMI HEST 00000000 00000000) [ 0.019040] ACPI: BERT 0x000000007DFC3CA8 000030 (v01 AMI AMI BERT 00000000 00000000) [ 0.019045] ACPI: DMAR 0x000000007DFC3CD8 0000B4 (v01 A M I OEMDMAR 00000001 INTL 00000001) [ 0.019051] ACPI: MCFG 0x000000007DFC3D90 00003C (v01 SUPERM SMCI--MB 00000001 MSFT 00000097) [ 0.019054] ACPI: Reserving FACP table memory at [mem 0x7defbab0-0x7defbba3] [ 0.019057] ACPI: Reserving DSDT table memory at [mem 0x7def11a0-0x7defbaaf] [ 0.019058] ACPI: Reserving FACS table memory at [mem 0x7e1d8080-0x7e1d80bf] [ 0.019060] ACPI: Reserving APIC table memory at [mem 0x7defbba8-0x7defbc37] [ 0.019061] ACPI: Reserving FPDT table memory at [mem 0x7defbc38-0x7defbc7b] [ 0.019062] ACPI: Reserving HPET table memory at [mem 0x7defbc80-0x7defbcb7] [ 0.019064] ACPI: Reserving PRAD table memory at [mem 0x7defbcb8-0x7defbd75] [ 0.019065] ACPI: Reserving SPMI table memory at [mem 0x7defbd78-0x7defbdb7] [ 0.019067] ACPI: Reserving SSDT table memory at [mem 0x7defbdb8-0x7dfc389f] [ 0.019068] ACPI: Reserving EINJ table memory at [mem 0x7dfc38a0-0x7dfc39cf] [ 0.019069] ACPI: Reserving ERST table memory at [mem 0x7dfc39d0-0x7dfc3bff] [ 0.019071] ACPI: Reserving HEST table memory at [mem 0x7dfc3c00-0x7dfc3ca7] [ 0.019072] ACPI: Reserving BERT table memory at [mem 0x7dfc3ca8-0x7dfc3cd7] [ 0.019073] ACPI: Reserving DMAR table memory at [mem 0x7dfc3cd8-0x7dfc3d8b] [ 0.019075] ACPI: Reserving MCFG table memory at [mem 0x7dfc3d90-0x7dfc3dcb] [ 0.019145] No NUMA configuration found [ 0.019146] Faking a node at [mem 0x0000000000000000-0x000000027fffffff] [ 0.019162] NODE_DATA(0) allocated [mem 0x27ffd5000-0x27fffffff] [ 0.019631] Zone ranges: [ 0.019633] DMA [mem 0x0000000000001000-0x0000000000ffffff] [ 0.019636] DMA32 [mem 0x0000000001000000-0x00000000ffffffff] [ 0.019638] Normal [mem 0x0000000100000000-0x000000027fffffff] [ 0.019640] Device empty [ 0.019642] Movable zone start for each node [ 0.019646] Early memory node ranges [ 0.019647] node 0: [mem 0x0000000000001000-0x0000000000099fff] [ 0.019649] node 0: [mem 0x0000000000100000-0x000000007de2bfff] [ 0.019651] node 0: [mem 0x0000000100000000-0x000000027fffffff] [ 0.019655] Initmem setup node 0 [mem 0x0000000000001000-0x000000027fffffff] [ 0.019662] On node 0, zone DMA: 1 pages in unavailable ranges [ 0.019717] On node 0, zone DMA: 102 pages in unavailable ranges [ 0.027846] On node 0, zone Normal: 8660 pages in unavailable ranges [ 0.028140] ACPI: PM-Timer IO Port: 0x408 [ 0.028152] ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1]) [ 0.028155] ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1]) [ 0.028156] ACPI: LAPIC_NMI (acpi_id[0x02] high edge lint[0x1]) [ 0.028158] ACPI: LAPIC_NMI (acpi_id[0x03] high edge lint[0x1]) [ 0.028170] IOAPIC[0]: apic_id 0, version 32, address 0xfec00000, GSI 0-23 [ 0.028176] IOAPIC[1]: apic_id 2, version 32, address 0xfec01000, GSI 24-47 [ 0.028180] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl) [ 0.028183] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level) [ 0.028190] ACPI: Using ACPI (MADT) for SMP configuration information [ 0.028192] ACPI: HPET id: 0x8086a701 base: 0xfed00000 [ 0.028198] TSC deadline timer available [ 0.028200] smpboot: Allowing 4 CPUs, 0 hotplug CPUs [ 0.028222] PM: hibernation: Registered nosave memory: [mem 0x00000000-0x00000fff] [ 0.028225] PM: hibernation: Registered nosave memory: [mem 0x0009a000-0x0009afff] [ 0.028226] PM: hibernation: Registered nosave memory: [mem 0x0009b000-0x0009ffff] [ 0.028228] PM: hibernation: Registered nosave memory: [mem 0x000a0000-0x000dffff] [ 0.028229] PM: hibernation: Registered nosave memory: [mem 0x000e0000-0x000fffff] [ 0.028231] PM: hibernation: Registered nosave memory: [mem 0x7de2c000-0x7debafff] [ 0.028232] PM: hibernation: Registered nosave memory: [mem 0x7debb000-0x7dfc3fff] [ 0.028234] PM: hibernation: Registered nosave memory: [mem 0x7dfc4000-0x7e1e0fff] [ 0.028235] PM: hibernation: Registered nosave memory: [mem 0x7e1e1000-0x7f36afff] [ 0.028236] PM: hibernation: Registered nosave memory: [mem 0x7f36b000-0x7f7fffff] [ 0.028237] PM: hibernation: Registered nosave memory: [mem 0x7f800000-0x7fffffff] [ 0.028238] PM: hibernation: Registered nosave memory: [mem 0x80000000-0x8fffffff] [ 0.028240] PM: hibernation: Registered nosave memory: [mem 0x90000000-0xfed1bfff] [ 0.028241] PM: hibernation: Registered nosave memory: [mem 0xfed1c000-0xfed3ffff] [ 0.028242] PM: hibernation: Registered nosave memory: [mem 0xfed40000-0xfeffffff] [ 0.028243] PM: hibernation: Registered nosave memory: [mem 0xff000000-0xffffffff] [ 0.028246] [mem 0x90000000-0xfed1bfff] available for PCI devices [ 0.028247] Booting paravirtualized kernel on bare hardware [ 0.028251] clocksource: refined-jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645519600211568 ns [ 0.035700] setup_percpu: NR_CPUS:8192 nr_cpumask_bits:4 nr_cpu_ids:4 nr_node_ids:1 [ 0.036097] percpu: Embedded 61 pages/cpu s212992 r8192 d28672 u524288 [ 0.036106] pcpu-alloc: s212992 r8192 d28672 u524288 alloc=1*2097152 [ 0.036110] pcpu-alloc: [0] 0 1 2 3 [ 0.036150] Fallback order for Node 0: 0 [ 0.036154] Built 1 zonelists, mobility grouping on. Total pages: 2055603 [ 0.036156] Policy zone: Normal [ 0.036158] Kernel command line: BOOT_IMAGE=/vmlinuz-6.1.0-21-amd64 root=/dev/mapper/fiano0--vg-root ro console=ttyS0,115200n8 [ 0.036228] Unknown kernel command line parameters "BOOT_IMAGE=/vmlinuz-6.1.0-21-amd64", will be passed to user space. [ 0.036243] random: crng init done [ 0.037292] Dentry cache hash table entries: 1048576 (order: 11, 8388608 bytes, linear) [ 0.037860] Inode-cache hash table entries: 524288 (order: 10, 4194304 bytes, linear) [ 0.037948] mem auto-init: stack:all(zero), heap alloc:on, heap free:off [ 0.037962] software IO TLB: area num 4. [ 0.079910] Memory: 2087172K/8353556K available (14342K kernel code, 2332K rwdata, 9060K rodata, 2796K init, 17404K bss, 304404K reserved, 0K cma-reserved) [ 0.080123] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1 [ 0.080144] Kernel/User page tables isolation: enabled [ 0.080197] ftrace: allocating 40220 entries in 158 pages [ 0.090535] ftrace: allocated 158 pages with 5 groups [ 0.091486] Dynamic Preempt: voluntary [ 0.091530] rcu: Preemptible hierarchical RCU implementation. [ 0.091531] rcu: RCU restricting CPUs from NR_CPUS=8192 to nr_cpu_ids=4. [ 0.091533] Trampoline variant of Tasks RCU enabled. [ 0.091534] Rude variant of Tasks RCU enabled. [ 0.091535] Tracing variant of Tasks RCU enabled. [ 0.091536] rcu: RCU calculated value of scheduler-enlistment delay is 25 jiffies. [ 0.091537] rcu: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=4 [ 0.098950] NR_IRQS: 524544, nr_irqs: 864, preallocated irqs: 16 [ 0.099158] rcu: srcu_init: Setting srcu_struct sizes based on contention. [ 0.103685] Console: colour VGA+ 80x25 [ 1.028040] printk: console [ttyS0] enabled [ 1.032244] ACPI: Core revision 20220331 [ 1.036897] clocksource: hpet: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 133484882848 ns [ 1.046033] APIC: Switch to symmetric I/O mode setup [ 1.051015] DMAR: Host address width 46 [ 1.054864] DMAR: DRHD base: 0x000000fbffc000 flags: 0x1 [ 1.060190] DMAR: dmar0: reg_base_addr fbffc000 ver 1:0 cap d2078c106f0466 ecap f020de [ 1.068113] DMAR: RMRR base: 0x0000007de91000 end: 0x0000007de9dfff [ 1.074386] DMAR: ATSR flags: 0x0 [ 1.077697] DMAR: RHSA base: 0x000000fbffc000 proximity domain: 0x0 [ 1.083974] DMAR-IR: IOAPIC id 0 under DRHD base 0xfbffc000 IOMMU 0 [ 1.090332] DMAR-IR: IOAPIC id 2 under DRHD base 0xfbffc000 IOMMU 0 [ 1.096684] DMAR-IR: HPET id 0 under DRHD base 0xfbffc000 [ 1.102083] DMAR-IR: Queued invalidation will be enabled to support x2apic and Intr-remapping. [ 1.111218] DMAR-IR: Enabled IRQ remapping in x2apic mode [ 1.116611] x2apic enabled [ 1.119337] Switched APIC routing to cluster x2apic. [ 1.124848] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1 [ 1.150030] clocksource: tsc-early: mask: 0xffffffffffffffff max_cycles: 0x19f26623e55, max_idle_ns: 440795282553 ns [ 1.160545] Calibrating delay loop (skipped), value calculated using timer frequency.. 3600.12 BogoMIPS (lpj=7200256) [ 1.164574] CPU0: Thermal monitoring enabled (TM1) [ 1.168628] process: using mwait in idle threads [ 1.172545] Last level iTLB entries: 4KB 512, 2MB 8, 4MB 8 [ 1.176542] Last level dTLB entries: 4KB 512, 2MB 0, 4MB 0, 1GB 4 [ 1.180545] Spectre V1 : Mitigation: usercopy/swapgs barriers and __user pointer sanitization [ 1.184544] Spectre V2 : Mitigation: Retpolines [ 1.188542] Spectre V2 : Spectre v2 / SpectreRSB mitigation: Filling RSB on context switch [ 1.192542] Spectre V2 : Spectre v2 / SpectreRSB : Filling RSB on VMEXIT [ 1.196542] Spectre V2 : Enabling Restricted Speculation for firmware calls [ 1.200544] Spectre V2 : mitigation: Enabling conditional Indirect Branch Prediction Barrier [ 1.204543] Speculative Store Bypass: Mitigation: Speculative Store Bypass disabled via prctl [ 1.208543] MDS: Mitigation: Clear CPU buffers [ 1.212542] MMIO Stale Data: Unknown: No mitigations [ 1.216548] x86/fpu: Supporting XSAVE feature 0x001: 'x87 floating point registers' [ 1.220542] x86/fpu: Supporting XSAVE feature 0x002: 'SSE registers' [ 1.224542] x86/fpu: Supporting XSAVE feature 0x004: 'AVX registers' [ 1.228543] x86/fpu: xstate_offset[2]: 576, xstate_sizes[2]: 256 [ 1.232542] x86/fpu: Enabled xstate features 0x7, context size is 832 bytes, using 'standard' format. [ 1.261370] Freeing SMP alternatives memory: 36K [ 1.264543] pid_max: default: 32768 minimum: 301 [ 1.268576] LSM: Security Framework initializing [ 1.272562] landlock: Up and running. [ 1.276542] Yama: disabled by default; enable with sysctl kernel.yama.* [ 1.280573] AppArmor: AppArmor initialized [ 1.284544] TOMOYO Linux initialized [ 1.288549] LSM support for eBPF active [ 1.292589] Mount-cache hash table entries: 16384 (order: 5, 131072 bytes, linear) [ 1.296558] Mountpoint-cache hash table entries: 16384 (order: 5, 131072 bytes, linear) [ 1.301169] smpboot: CPU0: Intel(R) Xeon(R) CPU E5-2403 v2 @ 1.80GHz (family: 0x6, model: 0x3e, stepping: 0x4) [ 1.304735] cblist_init_generic: Setting adjustable number of callback queues. [ 1.308544] cblist_init_generic: Setting shift to 2 and lim to 1. [ 1.312574] cblist_init_generic: Setting adjustable number of callback queues. [ 1.316543] cblist_init_generic: Setting shift to 2 and lim to 1. [ 1.320565] cblist_init_generic: Setting adjustable number of callback queues. [ 1.324543] cblist_init_generic: Setting shift to 2 and lim to 1. [ 1.328564] Performance Events: PEBS fmt1+, IvyBridge events, 16-deep LBR, full-width counters, Intel PMU driver. [ 1.332544] ... version: 3 [ 1.336543] ... bit width: 48 [ 1.340542] ... generic registers: 8 [ 1.344542] ... value mask: 0000ffffffffffff [ 1.348542] ... max period: 00007fffffffffff [ 1.352543] ... fixed-purpose events: 3 [ 1.356542] ... event mask: 00000007000000ff [ 1.360776] signal: max sigframe size: 1776 [ 1.364568] Estimated ratio of average max frequency by base frequency (times 1024): 1024 [ 1.368576] rcu: Hierarchical SRCU implementation. [ 1.372543] rcu: Max phase no-delay instances is 1000. [ 1.377222] NMI watchdog: Enabled. Permanently consumes one hw-PMU counter. [ 1.380634] smp: Bringing up secondary CPUs ... [ 1.384693] x86: Booting SMP configuration: [ 1.388548] .... node #0, CPUs: #1 #2 #3 [ 1.403698] smp: Brought up 1 node, 4 CPUs [ 1.408544] smpboot: Max logical packages: 1 [ 1.412543] smpboot: Total of 4 processors activated (14400.51 BogoMIPS) [ 1.437502] node 0 deferred pages initialised in 20ms [ 1.440986] devtmpfs: initialized [ 1.444623] x86/mm: Memory block size: 128MB [ 1.449593] ACPI: PM: Registering ACPI NVS region [mem 0x7dfc4000-0x7e1e0fff] (2215936 bytes) [ 1.452594] ACPI: PM: Registering ACPI NVS region [mem 0x7f36b000-0x7f7fffff] (4804608 bytes) [ 1.456697] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645041785100000 ns [ 1.460556] futex hash table entries: 1024 (order: 4, 65536 bytes, linear) [ 1.464604] pinctrl core: initialized pinctrl subsystem [ 1.469437] NET: Registered PF_NETLINK/PF_ROUTE protocol family [ 1.472821] DMA: preallocated 1024 KiB GFP_KERNEL pool for atomic allocations [ 1.476696] DMA: preallocated 1024 KiB GFP_KERNEL|GFP_DMA pool for atomic allocations [ 1.480696] DMA: preallocated 1024 KiB GFP_KERNEL|GFP_DMA32 pool for atomic allocations [ 1.484553] audit: initializing netlink subsys (disabled) [ 1.488558] audit: type=2000 audit(1719264967.400:1): state=initialized audit_enabled=0 res=1 [ 1.488693] thermal_sys: Registered thermal governor 'fair_share' [ 1.492546] thermal_sys: Registered thermal governor 'bang_bang' [ 1.496543] thermal_sys: Registered thermal governor 'step_wise' [ 1.500543] thermal_sys: Registered thermal governor 'user_space' [ 1.504543] thermal_sys: Registered thermal governor 'power_allocator' [ 1.508561] cpuidle: using governor ladder [ 1.516547] cpuidle: using governor menu [ 1.520517] ACPI FADT declares the system doesn't support PCIe ASPM, so disable it [ 1.520544] acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5 [ 1.524646] PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0x80000000-0x8fffffff] (base 0x80000000) [ 1.528545] PCI: MMCONFIG at [mem 0x80000000-0x8fffffff] reserved in E820 [ 1.532552] pmd_set_huge: Cannot satisfy [mem 0x80000000-0x80200000] with a huge-page mapping due to MTRR override. [ 1.536964] PCI: Using configuration type 1 for base access [ 1.540641] core: PMU erratum BJ122, BV98, HSD29 workaround disabled, HT off [ 1.545882] kprobes: kprobe jump-optimization is enabled. All kprobes are optimized if possible. [ 1.548600] HugeTLB: registered 1.00 GiB page size, pre-allocated 0 pages [ 1.552546] HugeTLB: 16380 KiB vmemmap can be freed for a 1.00 GiB page [ 1.560546] HugeTLB: registered 2.00 MiB page size, pre-allocated 0 pages [ 1.568543] HugeTLB: 28 KiB vmemmap can be freed for a 2.00 MiB page [ 1.572959] ACPI: Added _OSI(Module Device) [ 1.576546] ACPI: Added _OSI(Processor Device) [ 1.580543] ACPI: Added _OSI(3.0 _SCP Extensions) [ 1.588544] ACPI: Added _OSI(Processor Aggregator Device) [ 1.707604] ACPI: 2 ACPI AML tables successfully acquired and loaded [ 1.738131] ACPI: Interpreter enabled [ 1.740565] ACPI: PM: (supports S0 S1 S4 S5) [ 1.744544] ACPI: Using IOAPIC for interrupt routing [ 1.752651] HEST: Table parsing has been initialized. [ 1.756669] GHES: APEI firmware first mode is enabled by WHEA _OSC. [ 1.760547] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug [ 1.772543] PCI: Using E820 reservations for host bridge windows [ 1.777101] ACPI: Enabled 5 GPEs in block 00 to 3F [ 1.784653] ACPI BIOS Error (bug): Could not resolve symbol [\_SB.PRAD], AE_NOT_FOUND (20220331/psargs-330) [ 1.788547] ACPI Error: Aborting method \_GPE._L24 due to previous error (AE_NOT_FOUND) (20220331/psparse-529) [ 1.792552] ACPI Error: AE_NOT_FOUND, while evaluating GPE method [_L24] (20220331/evgpe-511) [ 1.796541] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-fe]) [ 1.800541] acpi PNP0A08:00: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI HPX-Type3] [ 1.808636] acpi PNP0A08:00: _OSC: platform does not support [SHPCHotplug PME AER LTR] [ 1.816697] acpi PNP0A08:00: _OSC: OS now controls [PCIeHotplug PCIeCapability] [ 1.824544] acpi PNP0A08:00: FADT indicates ASPM is unsupported, using BIOS configuration [ 1.832904] PCI host bridge to bus 0000:00 [ 1.836546] pci_bus 0000:00: root bus resource [io 0x0000-0x03af window] [ 1.844543] pci_bus 0000:00: root bus resource [io 0x03e0-0x0cf7 window] [ 1.852543] pci_bus 0000:00: root bus resource [io 0x03b0-0x03df window] [ 1.856543] pci_bus 0000:00: root bus resource [io 0x0d00-0xffff window] [ 1.864544] pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000dffff window] [ 1.872543] pci_bus 0000:00: root bus resource [mem 0xfed08000-0xfed08fff window] [ 1.880543] pci_bus 0000:00: root bus resource [mem 0xfed0e000-0xfed0ffff window] [ 1.888543] pci_bus 0000:00: root bus resource [mem 0x80000000-0xfbffffff window] [ 1.896544] pci_bus 0000:00: root bus resource [bus 00-fe] [ 1.900574] pci 0000:00:00.0: [8086:0e00] type 00 class 0x060000 [ 1.904627] pci 0000:00:00.0: PME# supported from D0 D3hot D3cold [ 1.912669] pci 0000:00:01.0: [8086:0e02] type 01 class 0x060400 [ 1.920643] pci 0000:00:01.0: PME# supported from D0 D3hot D3cold [ 1.924711] pci 0000:00:01.1: [8086:0e03] type 01 class 0x060400 [ 1.932641] pci 0000:00:01.1: PME# supported from D0 D3hot D3cold [ 1.936711] pci 0000:00:03.0: [8086:0e08] type 01 class 0x060400 [ 1.944581] pci 0000:00:03.0: enabling Extended Tags [ 1.948607] pci 0000:00:03.0: PME# supported from D0 D3hot D3cold [ 1.956697] pci 0000:00:04.0: [8086:0e20] type 00 class 0x088000 [ 1.960560] pci 0000:00:04.0: reg 0x10: [mem 0xfbb1c000-0xfbb1ffff 64bit] [ 1.968689] pci 0000:00:04.1: [8086:0e21] type 00 class 0x088000 [ 1.972559] pci 0000:00:04.1: reg 0x10: [mem 0xfbb18000-0xfbb1bfff 64bit] [ 1.980679] pci 0000:00:04.2: [8086:0e22] type 00 class 0x088000 [ 1.988559] pci 0000:00:04.2: reg 0x10: [mem 0xfbb14000-0xfbb17fff 64bit] [ 1.992678] pci 0000:00:04.3: [8086:0e23] type 00 class 0x088000 [ 2.000559] pci 0000:00:04.3: reg 0x10: [mem 0xfbb10000-0xfbb13fff 64bit] [ 2.004679] pci 0000:00:04.4: [8086:0e24] type 00 class 0x088000 [ 2.012559] pci 0000:00:04.4: reg 0x10: [mem 0xfbb0c000-0xfbb0ffff 64bit] [ 2.020678] pci 0000:00:04.5: [8086:0e25] type 00 class 0x088000 [ 2.024559] pci 0000:00:04.5: reg 0x10: [mem 0xfbb08000-0xfbb0bfff 64bit] [ 2.032680] pci 0000:00:04.6: [8086:0e26] type 00 class 0x088000 [ 2.036562] pci 0000:00:04.6: reg 0x10: [mem 0xfbb04000-0xfbb07fff 64bit] [ 2.044678] pci 0000:00:04.7: [8086:0e27] type 00 class 0x088000 [ 2.052559] pci 0000:00:04.7: reg 0x10: [mem 0xfbb00000-0xfbb03fff 64bit] [ 2.056676] pci 0000:00:05.0: [8086:0e28] type 00 class 0x088000 [ 2.064673] pci 0000:00:05.2: [8086:0e2a] type 00 class 0x088000 [ 2.068669] pci 0000:00:05.4: [8086:0e2c] type 00 class 0x080020 [ 2.076555] pci 0000:00:05.4: reg 0x10: [mem 0xfbb25000-0xfbb25fff] [ 2.084693] pci 0000:00:11.0: [8086:1d3e] type 01 class 0x060400 [ 2.088664] pci 0000:00:11.0: PME# supported from D0 D3hot D3cold [ 2.096686] pci 0000:00:16.0: [8086:1d3a] type 00 class 0x078000 [ 2.100561] pci 0000:00:16.0: reg 0x10: [mem 0xfed0e000-0xfed0e00f 64bit] [ 2.108611] pci 0000:00:16.0: PME# supported from D0 D3hot D3cold [ 2.112633] pci 0000:00:16.1: [8086:1d3b] type 00 class 0x078000 [ 2.120561] pci 0000:00:16.1: reg 0x10: [mem 0xfed0f000-0xfed0f00f 64bit] [ 2.128611] pci 0000:00:16.1: PME# supported from D0 D3hot D3cold [ 2.132646] pci 0000:00:1a.0: [8086:1d2d] type 00 class 0x0c0320 [ 2.140559] pci 0000:00:1a.0: reg 0x10: [mem 0xfbb23000-0xfbb233ff] [ 2.144634] pci 0000:00:1a.0: PME# supported from D0 D3hot D3cold [ 2.152649] pci 0000:00:1c.0: [8086:1d10] type 01 class 0x060400 [ 2.156642] pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold [ 2.164574] pci 0000:00:1c.0: Enabling MPC IRBNCE [ 2.168544] pci 0000:00:1c.0: Intel PCH root port ACS workaround enabled [ 2.176646] pci 0000:00:1c.1: [8086:1d12] type 01 class 0x060400 [ 2.180643] pci 0000:00:1c.1: PME# supported from D0 D3hot D3cold [ 2.188567] pci 0000:00:1c.1: Enabling MPC IRBNCE [ 2.192544] pci 0000:00:1c.1: Intel PCH root port ACS workaround enabled [ 2.200671] pci 0000:00:1d.0: [8086:1d26] type 00 class 0x0c0320 [ 2.204560] pci 0000:00:1d.0: reg 0x10: [mem 0xfbb22000-0xfbb223ff] [ 2.212635] pci 0000:00:1d.0: PME# supported from D0 D3hot D3cold [ 2.216647] pci 0000:00:1e.0: [8086:244e] type 01 class 0x060401 [ 2.224688] pci 0000:00:1f.0: [8086:1d41] type 00 class 0x060100 [ 2.228759] pci 0000:00:1f.2: [8086:1d02] type 00 class 0x010601 [ 2.236556] pci 0000:00:1f.2: reg 0x10: [io 0xf050-0xf057] [ 2.240550] pci 0000:00:1f.2: reg 0x14: [io 0xf040-0xf043] [ 2.248549] pci 0000:00:1f.2: reg 0x18: [io 0xf030-0xf037] [ 2.252549] pci 0000:00:1f.2: reg 0x1c: [io 0xf020-0xf023] [ 2.260549] pci 0000:00:1f.2: reg 0x20: [io 0xf000-0xf01f] [ 2.264550] pci 0000:00:1f.2: reg 0x24: [mem 0xfbb21000-0xfbb217ff] [ 2.268587] pci 0000:00:1f.2: PME# supported from D3hot [ 2.276634] pci 0000:00:1f.3: [8086:1d22] type 00 class 0x0c0500 [ 2.280561] pci 0000:00:1f.3: reg 0x10: [mem 0xfbb20000-0xfbb200ff 64bit] [ 2.288567] pci 0000:00:1f.3: reg 0x20: [io 0x1180-0x119f] [ 2.292619] pci 0000:00:1f.6: [8086:1d24] type 00 class 0x118000 [ 2.300564] pci 0000:00:1f.6: reg 0x10: [mem 0xfed08000-0xfed08fff 64bit] [ 2.308706] pci 0000:00:01.0: PCI bridge to [bus 01] [ 2.312595] pci 0000:00:01.1: PCI bridge to [bus 02] [ 2.316593] pci 0000:00:03.0: PCI bridge to [bus 03] [ 2.320626] pci 0000:04:00.0: [8086:1d6b] type 00 class 0x010700 [ 2.328566] pci 0000:04:00.0: reg 0x10: [mem 0xfa47c000-0xfa47ffff 64bit pref] [ 2.336557] pci 0000:04:00.0: reg 0x18: [mem 0xfa000000-0xfa3fffff 64bit pref] [ 2.344552] pci 0000:04:00.0: reg 0x20: [io 0xe000-0xe0ff] [ 2.348569] pci 0000:04:00.0: enabling Extended Tags [ 2.352649] pci 0000:04:00.0: reg 0x164: [mem 0xfa400000-0xfa403fff 64bit pref] [ 2.360543] pci 0000:04:00.0: VF(n) BAR0 space: [mem 0xfa400000-0xfa47bfff 64bit pref] (contains BAR0 for 31 VFs) [ 2.372800] pci 0000:00:11.0: PCI bridge to [bus 04] [ 2.376546] pci 0000:00:11.0: bridge window [io 0xe000-0xefff] [ 2.380551] pci 0000:00:11.0: bridge window [mem 0xfa000000-0xfa4fffff 64bit pref] [ 2.388642] pci 0000:05:00.0: [8086:10d3] type 00 class 0x020000 [ 2.396578] pci 0000:05:00.0: reg 0x10: [mem 0xfba00000-0xfba1ffff] [ 2.400580] pci 0000:05:00.0: reg 0x18: [io 0xd000-0xd01f] [ 2.408562] pci 0000:05:00.0: reg 0x1c: [mem 0xfba20000-0xfba23fff] [ 2.412733] pci 0000:05:00.0: PME# supported from D0 D3hot D3cold [ 2.420767] pci 0000:00:1c.0: PCI bridge to [bus 05] [ 2.424546] pci 0000:00:1c.0: bridge window [io 0xd000-0xdfff] [ 2.432545] pci 0000:00:1c.0: bridge window [mem 0xfba00000-0xfbafffff] [ 2.440645] pci 0000:06:00.0: [8086:10d3] type 00 class 0x020000 [ 2.444578] pci 0000:06:00.0: reg 0x10: [mem 0xfb900000-0xfb91ffff] [ 2.452580] pci 0000:06:00.0: reg 0x18: [io 0xc000-0xc01f] [ 2.456562] pci 0000:06:00.0: reg 0x1c: [mem 0xfb920000-0xfb923fff] [ 2.464730] pci 0000:06:00.0: PME# supported from D0 D3hot D3cold [ 2.468758] pci 0000:00:1c.1: PCI bridge to [bus 06] [ 2.472546] pci 0000:00:1c.1: bridge window [io 0xc000-0xcfff] [ 2.480545] pci 0000:00:1c.1: bridge window [mem 0xfb900000-0xfb9fffff] [ 2.488565] pci_bus 0000:07: extended config space not accessible [ 2.492569] pci 0000:07:01.0: [102b:0532] type 00 class 0x030000 [ 2.500559] pci 0000:07:01.0: reg 0x10: [mem 0xf9000000-0xf9ffffff pref] [ 2.504551] pci 0000:07:01.0: reg 0x14: [mem 0xfb800000-0xfb803fff] [ 2.512552] pci 0000:07:01.0: reg 0x18: [mem 0xfb000000-0xfb7fffff] [ 2.520590] pci 0000:07:01.0: Video device with shadowed ROM at [mem 0x000c0000-0x000dffff] [ 2.528656] pci 0000:00:1e.0: PCI bridge to [bus 07] (subtractive decode) [ 2.532547] pci 0000:00:1e.0: bridge window [mem 0xfb000000-0xfb8fffff] [ 2.540550] pci 0000:00:1e.0: bridge window [mem 0xf9000000-0xf9ffffff 64bit pref] [ 2.548543] pci 0000:00:1e.0: bridge window [io 0x0000-0x03af window] (subtractive decode) [ 2.556543] pci 0000:00:1e.0: bridge window [io 0x03e0-0x0cf7 window] (subtractive decode) [ 2.564543] pci 0000:00:1e.0: bridge window [io 0x03b0-0x03df window] (subtractive decode) [ 2.572543] pci 0000:00:1e.0: bridge window [io 0x0d00-0xffff window] (subtractive decode) [ 2.584543] pci 0000:00:1e.0: bridge window [mem 0x000a0000-0x000dffff window] (subtractive decode) [ 2.592543] pci 0000:00:1e.0: bridge window [mem 0xfed08000-0xfed08fff window] (subtractive decode) [ 2.600543] pci 0000:00:1e.0: bridge window [mem 0xfed0e000-0xfed0ffff window] (subtractive decode) [ 2.608543] pci 0000:00:1e.0: bridge window [mem 0x80000000-0xfbffffff window] (subtractive decode) [ 2.621347] ACPI: PCI Root Bridge [UNC0] (domain 0000 [bus ff]) [ 2.624547] acpi PNP0A03:00: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI HPX-Type3] [ 2.636562] acpi PNP0A03:00: _OSC: OS now controls [PCIeHotplug SHPCHotplug PME AER PCIeCapability LTR] [ 2.644543] acpi PNP0A03:00: FADT indicates ASPM is unsupported, using BIOS configuration [ 2.652612] PCI host bridge to bus 0000:ff [ 2.656545] pci_bus 0000:ff: root bus resource [bus ff] [ 2.660557] pci 0000:ff:08.0: [8086:0e80] type 00 class 0x088000 [ 2.668623] pci 0000:ff:09.0: [8086:0e90] type 00 class 0x088000 [ 2.672612] pci 0000:ff:0a.0: [8086:0ec0] type 00 class 0x088000 [ 2.680603] pci 0000:ff:0a.1: [8086:0ec1] type 00 class 0x088000 [ 2.684602] pci 0000:ff:0a.2: [8086:0ec2] type 00 class 0x088000 [ 2.692609] pci 0000:ff:0a.3: [8086:0ec3] type 00 class 0x088000 [ 2.696609] pci 0000:ff:0b.0: [8086:0e1e] type 00 class 0x088000 [ 2.704600] pci 0000:ff:0b.3: [8086:0e1f] type 00 class 0x088000 [ 2.712601] pci 0000:ff:0c.0: [8086:0ee0] type 00 class 0x088000 [ 2.716603] pci 0000:ff:0c.1: [8086:0ee2] type 00 class 0x088000 [ 2.724604] pci 0000:ff:0d.0: [8086:0ee1] type 00 class 0x088000 [ 2.728600] pci 0000:ff:0d.1: [8086:0ee3] type 00 class 0x088000 [ 2.736604] pci 0000:ff:0e.0: [8086:0ea0] type 00 class 0x088000 [ 2.740606] pci 0000:ff:0e.1: [8086:0e30] type 00 class 0x110100 [ 2.748620] pci 0000:ff:0f.0: [8086:0ea8] type 00 class 0x088000 [ 2.752631] pci 0000:ff:0f.1: [8086:0e71] type 00 class 0x088000 [ 2.760626] pci 0000:ff:0f.2: [8086:0eaa] type 00 class 0x088000 [ 2.764626] pci 0000:ff:0f.3: [8086:0eab] type 00 class 0x088000 [ 2.772625] pci 0000:ff:0f.4: [8086:0eac] type 00 class 0x088000 [ 2.776625] pci 0000:ff:0f.5: [8086:0ead] type 00 class 0x088000 [ 2.784628] pci 0000:ff:10.0: [8086:0eb0] type 00 class 0x088000 [ 2.788626] pci 0000:ff:10.1: [8086:0eb1] type 00 class 0x088000 [ 2.796638] pci 0000:ff:10.2: [8086:0eb2] type 00 class 0x088000 [ 2.800627] pci 0000:ff:10.3: [8086:0eb3] type 00 class 0x088000 [ 2.808625] pci 0000:ff:10.4: [8086:0eb4] type 00 class 0x088000 [ 2.812627] pci 0000:ff:10.5: [8086:0eb5] type 00 class 0x088000 [ 2.820627] pci 0000:ff:10.6: [8086:0eb6] type 00 class 0x088000 [ 2.824625] pci 0000:ff:10.7: [8086:0eb7] type 00 class 0x088000 [ 2.832624] pci 0000:ff:13.0: [8086:0e1d] type 00 class 0x088000 [ 2.836603] pci 0000:ff:13.1: [8086:0e34] type 00 class 0x110100 [ 2.844608] pci 0000:ff:13.4: [8086:0e81] type 00 class 0x088000 [ 2.848604] pci 0000:ff:13.5: [8086:0e36] type 00 class 0x110100 [ 2.856606] pci 0000:ff:16.0: [8086:0ec8] type 00 class 0x088000 [ 2.864602] pci 0000:ff:16.1: [8086:0ec9] type 00 class 0x088000 [ 2.868601] pci 0000:ff:16.2: [8086:0eca] type 00 class 0x088000 [ 2.876763] ACPI: PCI: Interrupt link LNKA configured for IRQ 11 [ 2.880597] ACPI: PCI: Interrupt link LNKB configured for IRQ 10 [ 2.888595] ACPI: PCI: Interrupt link LNKC configured for IRQ 5 [ 2.892594] ACPI: PCI: Interrupt link LNKD configured for IRQ 11 [ 2.900595] ACPI: PCI: Interrupt link LNKE configured for IRQ 0 [ 2.904594] ACPI: PCI: Interrupt link LNKF configured for IRQ 0 [ 2.912612] ACPI: PCI: Interrupt link LNKG configured for IRQ 0 [ 2.916595] ACPI: PCI: Interrupt link LNKH configured for IRQ 7 [ 2.926180] iommu: Default domain type: Translated [ 2.928544] iommu: DMA domain TLB invalidation policy: lazy mode [ 2.936642] pps_core: LinuxPPS API ver. 1 registered [ 2.940544] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti [ 2.948546] PTP clock support registered [ 2.952483] EDAC MC: Ver: 3.0.0 [ 2.956805] NetLabel: Initializing [ 2.960204] NetLabel: domain hash size = 128 [ 2.964545] NetLabel: protocols = UNLABELED CIPSOv4 CALIPSO [ 2.972565] NetLabel: unlabeled traffic allowed by default [ 2.976543] PCI: Using ACPI for IRQ routing [ 2.987542] PCI: pci_cache_line_size set to 64 bytes [ 2.987667] e820: reserve RAM buffer [mem 0x0009ac00-0x0009ffff] [ 2.987670] e820: reserve RAM buffer [mem 0x7de2c000-0x7fffffff] [ 2.988580] pci 0000:07:01.0: vgaarb: setting as boot VGA device [ 2.992541] pci 0000:07:01.0: vgaarb: bridge control possible [ 2.992541] pci 0000:07:01.0: vgaarb: VGA device added: decodes=io+mem,owns=io+mem,locks=none [ 3.008550] vgaarb: loaded [ 3.013083] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0, 0, 0, 0, 0, 0 [ 3.020543] hpet0: 8 comparators, 64-bit 14.318180 MHz counter [ 3.026603] clocksource: Switched to clocksource tsc-early [ 3.030238] VFS: Disk quotas dquot_6.6.0 [ 3.034183] VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes) [ 3.041250] AppArmor: AppArmor Filesystem Enabled [ 3.045985] pnp: PnP ACPI init [ 3.049191] system 00:00: [mem 0xfc000000-0xfcffffff] has been reserved [ 3.055810] system 00:00: [mem 0xfd000000-0xfdffffff] has been reserved [ 3.062426] system 00:00: [mem 0xfe000000-0xfeafffff] has been reserved [ 3.069036] system 00:00: [mem 0xfeb00000-0xfebfffff] has been reserved [ 3.075781] system 00:01: [mem 0xfbffc000-0xfbffdfff] could not be reserved [ 3.082883] system 00:03: [io 0x04d0-0x04d1] has been reserved [ 3.088809] system 00:03: [mem 0x00000400-0x000004ff] could not be reserved [ 3.096089] system 00:06: [io 0x0b00-0x0b7f] has been reserved [ 3.102214] pnp 00:07: [dma 0 disabled] [ 3.102456] pnp 00:08: [dma 0 disabled] [ 3.102738] system 00:09: [io 0x0400-0x0453] has been reserved [ 3.108663] system 00:09: [io 0x0458-0x047f] has been reserved [ 3.114580] system 00:09: [io 0x1180-0x119f] has been reserved [ 3.120499] system 00:09: [io 0x0500-0x057f] has been reserved [ 3.126418] system 00:09: [mem 0xfed1c000-0xfed1ffff] has been reserved [ 3.133029] system 00:09: [mem 0xfec00000-0xfecfffff] could not be reserved [ 3.139989] system 00:09: [mem 0xff000000-0xffffffff] has been reserved [ 3.146710] system 00:0a: [io 0x0454-0x0457] has been reserved [ 3.152919] system 00:0b: [mem 0x00000000-0x0009ffff] could not be reserved [ 3.160159] pnp: PnP ACPI: found 12 devices [ 3.170860] clocksource: acpi_pm: mask: 0xffffff max_cycles: 0xffffff, max_idle_ns: 2085701024 ns [ 3.179827] NET: Registered PF_INET protocol family [ 3.184893] IP idents hash table entries: 131072 (order: 8, 1048576 bytes, linear) [ 3.195236] tcp_listen_portaddr_hash hash table entries: 4096 (order: 4, 65536 bytes, linear) [ 3.203804] Table-perturb hash table entries: 65536 (order: 6, 262144 bytes, linear) [ 3.211635] TCP established hash table entries: 65536 (order: 7, 524288 bytes, linear) [ 3.219937] TCP bind hash table entries: 65536 (order: 9, 2097152 bytes, linear) [ 3.227729] TCP: Hash tables configured (established 65536 bind 65536) [ 3.234355] MPTCP token hash table entries: 8192 (order: 5, 196608 bytes, linear) [ 3.241905] UDP hash table entries: 4096 (order: 5, 131072 bytes, linear) [ 3.248737] UDP-Lite hash table entries: 4096 (order: 5, 131072 bytes, linear) [ 3.256033] NET: Registered PF_UNIX/PF_LOCAL protocol family [ 3.261702] NET: Registered PF_XDP protocol family [ 3.266513] pci 0000:00:01.0: PCI bridge to [bus 01] [ 3.271484] pci 0000:00:01.1: PCI bridge to [bus 02] [ 3.276458] pci 0000:00:03.0: PCI bridge to [bus 03] [ 3.281434] pci 0000:00:11.0: PCI bridge to [bus 04] [ 3.286400] pci 0000:00:11.0: bridge window [io 0xe000-0xefff] [ 3.292497] pci 0000:00:11.0: bridge window [mem 0xfa000000-0xfa4fffff 64bit pref] [ 3.300247] pci 0000:00:1c.0: PCI bridge to [bus 05] [ 3.305219] pci 0000:00:1c.0: bridge window [io 0xd000-0xdfff] [ 3.311320] pci 0000:00:1c.0: bridge window [mem 0xfba00000-0xfbafffff] [ 3.318116] pci 0000:00:1c.1: PCI bridge to [bus 06] [ 3.323084] pci 0000:00:1c.1: bridge window [io 0xc000-0xcfff] [ 3.329179] pci 0000:00:1c.1: bridge window [mem 0xfb900000-0xfb9fffff] [ 3.335971] pci 0000:00:1e.0: PCI bridge to [bus 07] [ 3.340938] pci 0000:00:1e.0: bridge window [mem 0xfb000000-0xfb8fffff] [ 3.347724] pci 0000:00:1e.0: bridge window [mem 0xf9000000-0xf9ffffff 64bit pref] [ 3.355467] pci_bus 0000:00: resource 4 [io 0x0000-0x03af window] [ 3.361648] pci_bus 0000:00: resource 5 [io 0x03e0-0x0cf7 window] [ 3.367829] pci_bus 0000:00: resource 6 [io 0x03b0-0x03df window] [ 3.374007] pci_bus 0000:00: resource 7 [io 0x0d00-0xffff window] [ 3.380185] pci_bus 0000:00: resource 8 [mem 0x000a0000-0x000dffff window] [ 3.387059] pci_bus 0000:00: resource 9 [mem 0xfed08000-0xfed08fff window] [ 3.393930] pci_bus 0000:00: resource 10 [mem 0xfed0e000-0xfed0ffff window] [ 3.400890] pci_bus 0000:00: resource 11 [mem 0x80000000-0xfbffffff window] [ 3.407851] pci_bus 0000:04: resource 0 [io 0xe000-0xefff] [ 3.413421] pci_bus 0000:04: resource 2 [mem 0xfa000000-0xfa4fffff 64bit pref] [ 3.420641] pci_bus 0000:05: resource 0 [io 0xd000-0xdfff] [ 3.426216] pci_bus 0000:05: resource 1 [mem 0xfba00000-0xfbafffff] [ 3.432480] pci_bus 0000:06: resource 0 [io 0xc000-0xcfff] [ 3.438051] pci_bus 0000:06: resource 1 [mem 0xfb900000-0xfb9fffff] [ 3.444317] pci_bus 0000:07: resource 1 [mem 0xfb000000-0xfb8fffff] [ 3.450582] pci_bus 0000:07: resource 2 [mem 0xf9000000-0xf9ffffff 64bit pref] [ 3.457804] pci_bus 0000:07: resource 4 [io 0x0000-0x03af window] [ 3.463983] pci_bus 0000:07: resource 5 [io 0x03e0-0x0cf7 window] [ 3.470160] pci_bus 0000:07: resource 6 [io 0x03b0-0x03df window] [ 3.476340] pci_bus 0000:07: resource 7 [io 0x0d00-0xffff window] [ 3.482520] pci_bus 0000:07: resource 8 [mem 0x000a0000-0x000dffff window] [ 3.489391] pci_bus 0000:07: resource 9 [mem 0xfed08000-0xfed08fff window] [ 3.496265] pci_bus 0000:07: resource 10 [mem 0xfed0e000-0xfed0ffff window] [ 3.503222] pci_bus 0000:07: resource 11 [mem 0x80000000-0xfbffffff window] [ 3.510277] pci 0000:00:05.0: disabled boot interrupts on device [8086:0e28] [ 3.541467] pci 0000:00:1a.0: quirk_usb_early_handoff+0x0/0x750 took 23558 usecs [ 3.573453] pci 0000:00:1d.0: quirk_usb_early_handoff+0x0/0x750 took 23991 usecs [ 3.580955] PCI: CLS 64 bytes, default 64 [ 3.585002] DMAR: No SATC found [ 3.585034] Trying to unpack rootfs image as initramfs... [ 3.588147] DMAR: dmar0: Using Queued invalidation [ 3.588226] pci 0000:00:00.0: Adding to iommu group 0 [ 3.603452] pci 0000:00:01.0: Adding to iommu group 1 [ 3.608530] pci 0000:00:01.1: Adding to iommu group 2 [ 3.613614] pci 0000:00:03.0: Adding to iommu group 3 [ 3.618701] pci 0000:00:04.0: Adding to iommu group 4 [ 3.623785] pci 0000:00:04.1: Adding to iommu group 5 [ 3.628863] pci 0000:00:04.2: Adding to iommu group 6 [ 3.633943] pci 0000:00:04.3: Adding to iommu group 7 [ 3.639031] pci 0000:00:04.4: Adding to iommu group 8 [ 3.644108] pci 0000:00:04.5: Adding to iommu group 9 [ 3.649186] pci 0000:00:04.6: Adding to iommu group 10 [ 3.654351] pci 0000:00:04.7: Adding to iommu group 11 [ 3.659517] pci 0000:00:05.0: Adding to iommu group 12 [ 3.664681] pci 0000:00:05.2: Adding to iommu group 13 [ 3.669850] pci 0000:00:05.4: Adding to iommu group 14 [ 3.675019] pci 0000:00:11.0: Adding to iommu group 15 [ 3.680209] pci 0000:00:16.0: Adding to iommu group 16 [ 3.685380] pci 0000:00:16.1: Adding to iommu group 16 [ 3.690553] pci 0000:00:1a.0: Adding to iommu group 17 [ 3.695720] pci 0000:00:1c.0: Adding to iommu group 18 [ 3.700898] pci 0000:00:1c.1: Adding to iommu group 19 [ 3.706062] pci 0000:00:1d.0: Adding to iommu group 20 [ 3.711230] pci 0000:00:1e.0: Adding to iommu group 21 [ 3.716439] pci 0000:00:1f.0: Adding to iommu group 22 [ 3.721610] pci 0000:00:1f.2: Adding to iommu group 22 [ 3.726776] pci 0000:00:1f.3: Adding to iommu group 22 [ 3.731942] pci 0000:00:1f.6: Adding to iommu group 22 [ 3.737118] pci 0000:04:00.0: Adding to iommu group 23 [ 3.742291] pci 0000:05:00.0: Adding to iommu group 24 [ 3.747465] pci 0000:06:00.0: Adding to iommu group 25 [ 3.752619] pci 0000:07:01.0: Adding to iommu group 21 [ 3.757806] pci 0000:ff:08.0: Adding to iommu group 26 [ 3.762985] pci 0000:ff:09.0: Adding to iommu group 27 [ 3.768191] pci 0000:ff:0a.0: Adding to iommu group 28 [ 3.773370] pci 0000:ff:0a.1: Adding to iommu group 28 [ 3.778541] pci 0000:ff:0a.2: Adding to iommu group 28 [ 3.783713] pci 0000:ff:0a.3: Adding to iommu group 28 [ 3.788907] pci 0000:ff:0b.0: Adding to iommu group 29 [ 3.794075] pci 0000:ff:0b.3: Adding to iommu group 29 [ 3.799266] pci 0000:ff:0c.0: Adding to iommu group 30 [ 3.804440] pci 0000:ff:0c.1: Adding to iommu group 30 [ 3.809638] pci 0000:ff:0d.0: Adding to iommu group 31 [ 3.814811] pci 0000:ff:0d.1: Adding to iommu group 31 [ 3.819998] pci 0000:ff:0e.0: Adding to iommu group 32 [ 3.825175] pci 0000:ff:0e.1: Adding to iommu group 32 [ 3.830343] pci 0000:ff:0f.0: Adding to iommu group 33 [ 3.835512] pci 0000:ff:0f.1: Adding to iommu group 34 [ 3.840679] pci 0000:ff:0f.2: Adding to iommu group 35 [ 3.845847] pci 0000:ff:0f.3: Adding to iommu group 36 [ 3.851016] pci 0000:ff:0f.4: Adding to iommu group 37 [ 3.856184] pci 0000:ff:0f.5: Adding to iommu group 38 [ 3.861358] pci 0000:ff:10.0: Adding to iommu group 39 [ 3.866522] pci 0000:ff:10.1: Adding to iommu group 40 [ 3.871689] pci 0000:ff:10.2: Adding to iommu group 41 [ 3.876853] pci 0000:ff:10.3: Adding to iommu group 42 [ 3.882019] pci 0000:ff:10.4: Adding to iommu group 43 [ 3.887187] pci 0000:ff:10.5: Adding to iommu group 44 [ 3.892357] pci 0000:ff:10.6: Adding to iommu group 45 [ 3.897524] pci 0000:ff:10.7: Adding to iommu group 46 [ 3.902730] pci 0000:ff:13.0: Adding to iommu group 47 [ 3.907918] pci 0000:ff:13.1: Adding to iommu group 47 [ 3.913099] pci 0000:ff:13.4: Adding to iommu group 47 [ 3.918278] pci 0000:ff:13.5: Adding to iommu group 47 [ 3.923480] pci 0000:ff:16.0: Adding to iommu group 48 [ 3.928653] pci 0000:ff:16.1: Adding to iommu group 48 [ 3.933826] pci 0000:ff:16.2: Adding to iommu group 48 [ 3.942828] DMAR: Intel(R) Virtualization Technology for Directed I/O [ 3.949282] PCI-DMA: Using software bounce buffering for IO (SWIOTLB) [ 3.955727] software IO TLB: mapped [mem 0x0000000079e2c000-0x000000007de2c000] (64MB) [ 3.964222] Initialise system trusted keyrings [ 3.968689] Key type blacklist registered [ 3.972781] workingset: timestamp_bits=36 max_order=21 bucket_order=0 [ 3.981078] zbud: loaded [ 3.983940] integrity: Platform Keyring initialized [ 3.988834] integrity: Machine keyring initialized [ 3.993625] Key type asymmetric registered [ 3.997722] Asymmetric key parser 'x509' registered [ 4.029192] Freeing initrd memory: 39592K [ 4.040446] alg: self-tests for CTR-KDF (hmac(sha256)) passed [ 4.046234] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 248) [ 4.053674] io scheduler mq-deadline registered [ 4.060643] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4 [ 4.067467] Monitor-Mwait will be used to enter C-1 state [ 4.067480] Monitor-Mwait will be used to enter C-2 state [ 4.067487] ACPI: \_SB_.SCK0.C000: Found 2 idle states [ 4.077548] ERST: Error Record Serialization Table (ERST) support is initialized. [ 4.085041] pstore: Registered erst as persistent store backend [ 4.091098] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled [ 4.097536] 00:07: ttyS0 at I/O 0x3f8 (irq = 4, base_baud = 115200) is a 16550A [ 4.105631] 00:08: ttyS1 at I/O 0x2f8 (irq = 3, base_baud = 115200) is a 16550A [ 4.113871] Linux agpgart interface v0.103 [ 4.118097] AMD-Vi: AMD IOMMUv2 functionality not available on this system - This is not a bug. [ 4.127260] i8042: PNP: PS/2 Controller [PNP0f03:PS2M] at 0x60,0x64 irq 12 [ 4.134142] i8042: PNP: PS/2 controller doesn't have KBD irq; using default 1 [ 4.143731] serio: i8042 KBD port at 0x60,0x64 irq 1 [ 4.148708] serio: i8042 AUX port at 0x60,0x64 irq 12 [ 4.153926] mousedev: PS/2 mouse device common for all mice [ 4.159536] rtc_cmos 00:02: RTC can wake from S4 [ 4.164439] rtc_cmos 00:02: registered as rtc0 [ 4.168920] rtc_cmos 00:02: setting system clock to 2024-06-24T21:36:12 UTC (1719264972) [ 4.177051] rtc_cmos 00:02: alarms up to one month, y3k, 114 bytes nvram, hpet irqs [ 4.184879] intel_pstate: Intel P-state driver initializing [ 4.190751] ledtrig-cpu: registered to indicate activity on CPUs [ 4.214750] NET: Registered PF_INET6 protocol family [ 4.227519] Segment Routing with IPv6 [ 4.231206] In-situ OAM (IOAM) with IPv6 [ 4.235178] mip6: Mobile IPv6 [ 4.238160] NET: Registered PF_PACKET protocol family [ 4.243307] mpls_gso: MPLS GSO support [ 4.247531] microcode: sig=0x306e4, pf=0x8, revision=0x42e [ 4.253096] microcode: Microcode Update Driver: v2.2. [ 4.253103] IPI shorthand broadcast: enabled [ 4.262458] sched_clock: Marking stable (3273074357, 989350476)->(4637487345, -375062512) [ 4.270888] registered taskstats version 1 [ 4.275001] Loading compiled-in X.509 certificates [ 4.319107] Loaded X.509 cert 'Debian Secure Boot CA: 6ccece7e4c6c0d1f6149f3dd27dfcc5cbb419ea1' [ 4.327842] Loaded X.509 cert 'Debian Secure Boot Signer 2022 - linux: 14011249c2675ea8e5148542202005810584b25f' [ 4.338425] zswap: loaded using pool lzo/zbud [ 4.343021] Key type .fscrypt registered [ 4.346949] Key type fscrypt-provisioning registered [ 4.352214] pstore: Using crash dump compression: deflate [ 4.365854] Key type encrypted registered [ 4.369896] AppArmor: AppArmor sha1 policy hashing enabled [ 4.375401] ima: No TPM chip found, activating TPM-bypass! [ 4.380890] ima: Allocated hash algorithm: sha256 [ 4.385607] ima: No architecture policies found [ 4.390148] evm: Initialising EVM extended attributes: [ 4.395282] evm: security.selinux [ 4.398601] evm: security.SMACK64 (disabled) [ 4.402876] evm: security.SMACK64EXEC (disabled) [ 4.407493] evm: security.SMACK64TRANSMUTE (disabled) [ 4.412546] evm: security.SMACK64MMAP (disabled) [ 4.417166] evm: security.apparmor [ 4.420570] evm: security.ima [ 4.423543] evm: security.capability [ 4.427124] evm: HMAC attrs: 0x1 [ 4.601595] clk: Disabling unused clocks [ 4.607159] Freeing unused decrypted memory: 2036K [ 4.612646] Freeing unused kernel image (initmem) memory: 2796K [ 4.618639] Write protecting the kernel read-only data: 26624k [ 4.625205] Freeing unused kernel image (text/rodata gap) memory: 2040K [ 4.632155] Freeing unused kernel image (rodata/data gap) memory: 1180K [ 4.724940] x86/mm: Checked W+X mappings: passed, no W+X pages found. [ 4.731376] x86/mm: Checking user space page tables [ 4.811111] x86/mm: Checked W+X mappings: passed, no W+X pages found. [ 4.817552] Run /init as init process [ 4.821217] with arguments: [ 4.821219] /init [ 4.821220] with environment: [ 4.821221] HOME=/ [ 4.821222] TERM=linux [ 4.821224] BOOT_IMAGE=/vmlinuz-6.1.0-21-amd64 [ 4.993367] tsc: Refined TSC clocksource calibration: 1799.999 MHz [ 4.999581] clocksource: tsc: mask: 0xffffffffffffffff max_cycles: 0x19f228ab7a2, max_idle_ns: 440795289252 ns [ 5.010184] clocksource: Switched to clocksource tsc [ 5.042236] i801_smbus 0000:00:1f.3: SMBus using PCI interrupt [ 5.048180] i2c i2c-0: 1/6 memory slots populated (from DMI) [ 5.053839] i2c i2c-0: Systems with more than 4 memory slots not supported yet, not instantiating SPD [ 5.063438] ACPI: bus type USB registered [ 5.067491] usbcore: registered new interface driver usbfs [ 5.072990] usbcore: registered new interface driver hub [ 5.078330] usbcore: registered new device driver usb [ 5.089625] SCSI subsystem initialized [ 5.100751] ehci-pci 0000:00:1a.0: EHCI Host Controller [ 5.119315] ehci-pci 0000:00:1a.0: new USB bus registered, assigned bus number 1 [ 5.127552] ehci-pci 0000:00:1a.0: debug port 2 [ 5.127718] e1000e: Intel(R) PRO/1000 Network Driver [ 5.132187] libata version 3.00 loaded. [ 5.137095] e1000e: Copyright(c) 1999 - 2015 Intel Corporation. [ 5.137420] e1000e 0000:05:00.0: Interrupt Throttling Rate (ints/sec) set to dynamic conservative mode [ 5.141327] ehci-pci 0000:00:1a.0: irq 16, io mem 0xfbb23000 [ 5.161384] ehci-pci 0000:00:1a.0: USB 2.0 started, EHCI 1.00 [ 5.167205] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 6.01 [ 5.175480] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 5.182703] usb usb1: Product: EHCI Host Controller [ 5.187587] usb usb1: Manufacturer: Linux 6.1.0-21-amd64 ehci_hcd [ 5.193677] usb usb1: SerialNumber: 0000:00:1a.0 [ 5.198559] hub 1-0:1.0: USB hub found [ 5.198586] ahci 0000:00:1f.2: version 3.0 [ 5.202329] hub 1-0:1.0: 2 ports detected [ 5.206693] ehci-pci 0000:00:1d.0: EHCI Host Controller [ 5.211930] ehci-pci 0000:00:1d.0: new USB bus registered, assigned bus number 2 [ 5.212636] ahci 0000:00:1f.2: AHCI 0001.0300 32 slots 6 ports 6 Gbps 0x3f impl SATA mode [ 5.219336] ehci-pci 0000:00:1d.0: debug port 2 [ 5.227505] ahci 0000:00:1f.2: flags: 64bit ncq sntf pm led clo pio slum part ems apst [ 5.227566] e1000e 0000:05:00.0 0000:05:00.0 (uninitialized): registered PHC clock [ 5.237337] ehci-pci 0000:00:1d.0: irq 23, io mem 0xfbb22000 [ 5.255616] isci: Intel(R) C600 SAS Controller Driver - version 1.2.0 [ 5.262077] isci 0000:04:00.0: driver configured for rev: 6 silicon [ 5.269375] ehci-pci 0000:00:1d.0: USB 2.0 started, EHCI 1.00 [ 5.275275] usb usb2: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 6.01 [ 5.284039] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 5.286562] isci 0000:04:00.0: OEM parameter table found in OROM [ 5.291261] usb usb2: Product: EHCI Host Controller [ 5.291337] scsi host0: ahci [ 5.293969] e1000e 0000:05:00.0 eth0: (PCI Express:2.5GT/s:Width x1) 0c:c4:7a:13:33:8c [ 5.293974] e1000e 0000:05:00.0 eth0: Intel(R) PRO/1000 Network Connection [ 5.294054] e1000e 0000:05:00.0 eth0: MAC: 3, PHY: 8, PBA No: FFFFFF-0FF [ 5.294308] e1000e 0000:06:00.0: Interrupt Throttling Rate (ints/sec) set to dynamic conservative mode [ 5.295020] scsi host1: ahci [ 5.295362] scsi host2: ahci [ 5.295652] scsi host3: ahci [ 5.295922] scsi host4: ahci [ 5.296197] scsi host5: ahci [ 5.296261] ata1: SATA max UDMA/133 abar m2048@0xfbb21000 port 0xfbb21100 irq 32 [ 5.296266] ata2: SATA max UDMA/133 abar m2048@0xfbb21000 port 0xfbb21180 irq 32 [ 5.296269] ata3: SATA max UDMA/133 abar m2048@0xfbb21000 port 0xfbb21200 irq 32 [ 5.296271] ata4: SATA max UDMA/133 abar m2048@0xfbb21000 port 0xfbb21280 irq 32 [ 5.296274] ata5: SATA max UDMA/133 abar m2048@0xfbb21000 port 0xfbb21300 irq 32 [ 5.296276] ata6: SATA max UDMA/133 abar m2048@0xfbb21000 port 0xfbb21380 irq 32 [ 5.297263] isci 0000:04:00.0: OEM SAS parameters (version: 1.0) loaded (platform) [ 5.302139] usb usb2: Manufacturer: Linux 6.1.0-21-amd64 ehci_hcd [ 5.313113] isci 0000:04:00.0: SCU controller 0: phy 3-0 cables: {short, short, short, short} [ 5.319811] usb usb2: SerialNumber: 0000:00:1d.0 [ 5.319991] hub 2-0:1.0: USB hub found [ 5.329242] scsi host6: isci [ 5.335828] hub 2-0:1.0: 2 ports detected [ 5.347546] e1000e 0000:06:00.0 0000:06:00.0 (uninitialized): registered PHC clock [ 5.473414] usb 1-1: new high-speed USB device number 2 using ehci-pci [ 5.490565] e1000e 0000:06:00.0 eth1: (PCI Express:2.5GT/s:Width x1) 0c:c4:7a:13:33:8d [ 5.498492] e1000e 0000:06:00.0 eth1: Intel(R) PRO/1000 Network Connection [ 5.505466] e1000e 0000:06:00.0 eth1: MAC: 3, PHY: 8, PBA No: FFFFFF-0FF [ 5.612300] ata1: SATA link up 6.0 Gbps (SStatus 133 SControl 300) [ 5.617369] usb 2-1: new high-speed USB device number 2 using ehci-pci [ 5.618530] ata6: SATA link down (SStatus 0 SControl 300) [ 5.630461] ata4: SATA link down (SStatus 0 SControl 300) [ 5.635888] ata5: SATA link down (SStatus 0 SControl 300) [ 5.637758] usb 1-1: New USB device found, idVendor=8087, idProduct=0024, bcdDevice= 0.00 [ 5.641369] ata2: SATA link down (SStatus 0 SControl 300) [ 5.649476] usb 1-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0 [ 5.654978] ata3: SATA link down (SStatus 0 SControl 300) [ 5.662470] hub 1-1:1.0: USB hub found [ 5.667572] ata1.00: ATA-8: WDC WD1003FBYZ-010FB0, 01.01V03, max UDMA/133 [ 5.671266] hub 1-1:1.0: 6 ports detected [ 5.678269] ata1.00: 1953525168 sectors, multi 16: LBA48 NCQ (depth 32), AA [ 5.690630] ata1.00: configured for UDMA/133 [ 5.694985] scsi: waiting for bus probes to complete ... [ 5.769589] scsi 0:0:0:0: Direct-Access ATA WDC WD1003FBYZ-0 1V03 PQ: 0 ANSI: 5 [ 5.779700] e1000e 0000:05:00.0 enx0cc47a13338c: renamed from eth0 [ 5.797751] usb 2-1: New USB device found, idVendor=8087, idProduct=0024, bcdDevice= 0.00 [ 5.805819] e1000e 0000:06:00.0 enx0cc47a13338d: renamed from eth1 [ 5.805965] usb 2-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0 [ 5.819651] hub 2-1:1.0: USB hub found [ 5.823529] hub 2-1:1.0: 8 ports detected [ 5.828424] sd 0:0:0:0: [sda] 1953525168 512-byte logical blocks: (1.00 TB/932 GiB) [ 5.836159] sd 0:0:0:0: [sda] Write Protect is off [ 5.840962] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00 [ 5.840983] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 5.850063] sd 0:0:0:0: [sda] Preferred minimum I/O size 512 bytes [ 5.877043] sda: sda1 sda2 < sda5 > [ 5.880899] sd 0:0:0:0: [sda] Attached SCSI disk [ 5.973424] usb 1-1.1: new full-speed USB device number 3 using ehci-pci [ 6.087334] usb 1-1.1: New USB device found, idVendor=0557, idProduct=2221, bcdDevice= 0.01 [ 6.095704] usb 1-1.1: New USB device strings: Mfr=1, Product=2, SerialNumber=0 [ 6.103020] usb 1-1.1: Product: Hermon USB hidmouse Device [ 6.108511] usb 1-1.1: Manufacturer: Winbond Electronics Corp [ 6.128826] hid: raw HID events driver (C) Jiri Kosina [ 6.139677] usbcore: registered new interface driver usbhid [ 6.145291] usbhid: USB HID core driver [ 6.152629] input: Winbond Electronics Corp Hermon USB hidmouse Device as /devices/pci0000:00/0000:00:1a.0/usb1/1-1/1-1.1/1-1.1:1.0/0003:0557:2221.0001/input/input3 [ 6.167544] hid-generic 0003:0557:2221.0001: input,hidraw0: USB HID v1.00 Mouse [Winbond Electronics Corp Hermon USB hidmouse Device] on usb-0000:00:1a.0-1.1/input0 [ 6.182470] input: Winbond Electronics Corp Hermon USB hidmouse Device as /devices/pci0000:00/0000:00:1a.0/usb1/1-1/1-1.1/1-1.1:1.1/0003:0557:2221.0002/input/input4 [ 6.253592] hid-generic 0003:0557:2221.0002: input,hidraw1: USB HID v1.00 Keyboard [Winbond Electronics Corp Hermon USB hidmouse Device] on usb-0000:00:1a.0-1.1/input1 [ 6.271969] device-mapper: core: CONFIG_IMA_DISABLE_HTABLE is disabled. Duplicate IMA measurements will not be recorded in the IMA log. [ 6.284174] device-mapper: uevent: version 1.0.3 [ 6.288898] device-mapper: ioctl: 4.47.0-ioctl (2022-07-28) initialised: dm-devel@redhat.com [ 6.963749] PM: Image not found (code -22) [ 7.387761] EXT4-fs (dm-0): mounting ext3 file system using the ext4 subsystem [ 7.399358] EXT4-fs (dm-0): mounted filesystem with ordered data mode. Quota mode: none. [ 7.590663] Not activating Mandatory Access Control as /sbin/tomoyo-init does not exist. [ 9.308415] dca service started, version 1.12.1 [ 9.471179] sd 0:0:0:0: Attached scsi generic sg0 type 0 [ 9.531947] input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input5 [ 9.546108] IPMI message handler: version 39.2 [ 9.552405] ipmi device interface [ 9.555798] ACPI: button: Power Button [PWRB] [ 9.560306] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input6 [ 9.567983] ACPI: button: Power Button [PWRF] [ 9.579351] ioatdma: Intel(R) QuickData Technology Driver 5.00 [ 9.602488] input: PC Speaker as /devices/platform/pcspkr/input/input7 [ 9.635596] ipmi_si: IPMI System Interface driver [ 9.640348] ipmi_si dmi-ipmi-si.0: ipmi_platform: probing via SMBIOS [ 9.646712] ipmi_platform: ipmi_si: SMBIOS: io 0xca2 regsize 1 spacing 1 irq 0 [ 9.653965] ipmi_si: Adding SMBIOS-specified kcs state machine [ 9.660332] ipmi_si IPI0001:00: ipmi_platform: probing via ACPI [ 9.667951] ipmi_si IPI0001:00: ipmi_platform: [io 0x0ca2] regsize 1 spacing 1 irq 0 [ 9.706145] ACPI: bus type drm_connector registered [ 9.711444] ipmi_si dmi-ipmi-si.0: Removing SMBIOS-specified kcs state machine in favor of ACPI [ 9.720157] ipmi_si: Adding ACPI-specified kcs state machine [ 9.726346] ipmi_si: Trying ACPI-specified kcs state machine at i/o address 0xca2, slave address 0x0, irq 0 [ 9.829432] mei_me 0000:00:16.0: Device doesn't have valid ME Interface [ 9.840475] RAPL PMU: API unit is 2^-32 Joules, 3 fixed counters, 163840 ms ovfl timer [ 9.848402] RAPL PMU: hw unit of domain pp0-core 2^-16 Joules [ 9.854166] RAPL PMU: hw unit of domain package 2^-16 Joules [ 9.859840] RAPL PMU: hw unit of domain dram 2^-16 Joules [ 9.865452] iTCO_vendor_support: vendor-support=0 [ 9.886293] iTCO_wdt iTCO_wdt.1.auto: unable to reset NO_REBOOT flag, device disabled by hardware/BIOS [ 9.904108] cryptd: max_cpu_qlen set to 1000 [ 10.005413] ipmi_si IPI0001:00: The BMC does not support clearing the recv irq bit, compensating, but the BMC needs to be fixed. [ 10.058669] AVX version of gcm_enc/dec engaged. [ 10.063310] AES CTR mode by8 optimization enabled [ 10.095899] ipmi_si IPI0001:00: IPMI message handler: Found new BMC (man_id: 0x002a7c, prod_id: 0x0703, dev_id: 0x20) [ 10.107125] mgag200 0000:07:01.0: vgaarb: deactivate vga console [ 10.118218] Console: switching to colour dummy device 80x25 [ 10.130228] [drm] Initialized mgag200 1.0.0 20110418 for 0000:07:01.0 on minor 0 [ 10.139524] fbcon: mgag200drmfb (fb0) is primary device [ 10.142364] ipmi_si IPI0001:00: IPMI kcs interface initialized [ 10.250565] ipmi_ssif: IPMI SSIF Interface driver [ 10.506756] Console: switching to colour frame buffer device 128x48 [ 10.592309] mgag200 0000:07:01.0: [drm] fb0: mgag200drmfb frame buffer device [ 10.912555] EDAC sbridge: Seeking for: PCI ID 8086:0ea0 [ 10.912583] EDAC sbridge: Seeking for: PCI ID 8086:0ea0 [ 10.912590] EDAC sbridge: Seeking for: PCI ID 8086:0e60 [ 10.912598] EDAC sbridge: Seeking for: PCI ID 8086:0ea8 [ 10.912607] EDAC sbridge: Seeking for: PCI ID 8086:0ea8 [ 10.912611] EDAC sbridge: Seeking for: PCI ID 8086:0e71 [ 10.912619] EDAC sbridge: Seeking for: PCI ID 8086:0e71 [ 10.912623] EDAC sbridge: Seeking for: PCI ID 8086:0eaa [ 10.912631] EDAC sbridge: Seeking for: PCI ID 8086:0eaa [ 10.912634] EDAC sbridge: Seeking for: PCI ID 8086:0eab [ 10.912643] EDAC sbridge: Seeking for: PCI ID 8086:0eab [ 10.912646] EDAC sbridge: Seeking for: PCI ID 8086:0eac [ 10.912655] EDAC sbridge: Seeking for: PCI ID 8086:0eac [ 10.912658] EDAC sbridge: Seeking for: PCI ID 8086:0ead [ 10.912667] EDAC sbridge: Seeking for: PCI ID 8086:0ead [ 10.912670] EDAC sbridge: Seeking for: PCI ID 8086:0e68 [ 10.912678] EDAC sbridge: Seeking for: PCI ID 8086:0e79 [ 10.912686] EDAC sbridge: Seeking for: PCI ID 8086:0e6a [ 10.912693] EDAC sbridge: Seeking for: PCI ID 8086:0e6b [ 10.912701] EDAC sbridge: Seeking for: PCI ID 8086:0e6c [ 10.912709] EDAC sbridge: Seeking for: PCI ID 8086:0e6d [ 10.912716] EDAC sbridge: Seeking for: PCI ID 8086:0eb8 [ 10.912724] EDAC sbridge: Seeking for: PCI ID 8086:0ebc [ 10.912732] EDAC sbridge: Seeking for: PCI ID 8086:0ec8 [ 10.912741] EDAC sbridge: Seeking for: PCI ID 8086:0ec8 [ 10.912743] EDAC sbridge: Seeking for: PCI ID 8086:0ec9 [ 10.912753] EDAC sbridge: Seeking for: PCI ID 8086:0ec9 [ 10.912755] EDAC sbridge: Seeking for: PCI ID 8086:0eca [ 10.912765] EDAC sbridge: Seeking for: PCI ID 8086:0eca [ 10.912909] EDAC MC0: Giving out device to module sb_edac controller Ivy Bridge SrcID#0_Ha#0: DEV 0000:ff:0e.0 (INTERRUPT) [ 10.923985] EDAC sbridge: Ver: 1.1.2 [ 11.041716] intel_rapl_common: Found RAPL domain package [ 11.047066] intel_rapl_common: Found RAPL domain core [ 11.052135] intel_rapl_common: Found RAPL domain dram [ 12.048607] EXT4-fs (dm-0): re-mounted. Quota mode: none. [ 13.050455] EXT4-fs (sda1): mounting ext3 file system using the ext4 subsystem [ 13.064348] EXT4-fs (sda1): mounted filesystem with ordered data mode. Quota mode: none. [ 13.112966] Adding 1949692k swap on /dev/mapper/fiano0--vg-swap_1. Priority:-2 extents:1 across:1949692k FS [ 13.675297] audit: type=1400 audit(1719264981.844:2): apparmor="STATUS" operation="profile_load" profile="unconfined" name="nvidia_modprobe" pid=1066 comm="apparmor_parser" [ 13.690715] audit: type=1400 audit(1719264981.852:3): apparmor="STATUS" operation="profile_load" profile="unconfined" name="lsb_release" pid=1065 comm="apparmor_parser" [ 13.705751] audit: type=1400 audit(1719264981.852:4): apparmor="STATUS" operation="profile_load" profile="unconfined" name="nvidia_modprobe//kmod" pid=1066 comm="apparmor_parser" [ 13.744704] audit: type=1400 audit(1719264981.912:5): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/bin/man" pid=1068 comm="apparmor_parser" [ 13.759992] audit: type=1400 audit(1719264981.916:6): apparmor="STATUS" operation="profile_load" profile="unconfined" name="man_filter" pid=1068 comm="apparmor_parser" [ 13.774963] audit: type=1400 audit(1719264981.916:7): apparmor="STATUS" operation="profile_load" profile="unconfined" name="man_groff" pid=1068 comm="apparmor_parser" [ 13.924882] audit: type=1400 audit(1719264982.092:8): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/sbin/ntpd" pid=1072 comm="apparmor_parser" [ 13.941741] audit: type=1400 audit(1719264982.112:9): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=1067 comm="apparmor_parser" [ 13.959746] audit: type=1400 audit(1719264982.112:10): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/NetworkManager/nm-dhcp-helper" pid=1067 comm="apparmor_parser" [ 13.977199] audit: type=1400 audit(1719264982.116:11): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/connman/scripts/dhclient-script" pid=1067 comm="apparmor_parser" [ 17.114464] e1000e 0000:05:00.0 enx0cc47a13338c: NIC Link is Up 1000 Mbps Full Duplex, Flow Control: None [ 17.124365] IPv6: ADDRCONF(NETDEV_CHANGE): enx0cc47a13338c: link becomes ready