[ 0.000000] Linux version 6.1.95+ (osstest@himrod2) (gcc (Debian 12.2.0-14) 12.2.0, GNU ld (GNU Binutils for Debian) 2.40) #1 SMP PREEMPT_DYNAMIC Mon Jun 24 19:52:01 UTC 2024 [ 0.000000] Command line: placeholder root=/dev/mapper/debina0--vg-root ro console=hvc0 [ 0.000000] Released 0 page(s) [ 0.000000] BIOS-provided physical RAM map: [ 0.000000] Xen: [mem 0x0000000000000000-0x0000000000099fff] usable [ 0.000000] Xen: [mem 0x000000000009ac00-0x00000000000fffff] reserved [ 0.000000] Xen: [mem 0x0000000000100000-0x0000000020065fff] usable [ 0.000000] Xen: [mem 0x00000000796ef000-0x00000000798bdfff] reserved [ 0.000000] Xen: [mem 0x00000000799b7000-0x0000000079e5afff] ACPI NVS [ 0.000000] Xen: [mem 0x0000000079e5b000-0x000000007bdb0fff] reserved [ 0.000000] Xen: [mem 0x000000007bdb2000-0x000000007be37fff] reserved [ 0.000000] Xen: [mem 0x0000000080000000-0x000000008fffffff] reserved [ 0.000000] Xen: [mem 0x00000000fbffc000-0x00000000fbffcfff] reserved [ 0.000000] Xen: [mem 0x00000000fec00000-0x00000000fec00fff] reserved [ 0.000000] Xen: [mem 0x00000000fed1c000-0x00000000fed1ffff] reserved [ 0.000000] Xen: [mem 0x00000000fee00000-0x00000000feefffff] reserved [ 0.000000] Xen: [mem 0x00000000ff000000-0x00000000ffffffff] reserved [ 0.000000] NX (Execute Disable) protection: active [ 0.000000] SMBIOS 2.8 present. [ 0.000000] DMI: Supermicro SYS-5018D-FN8T/X10SDV-TP8F, BIOS 1.0b 11/21/2016 [ 0.000000] Hypervisor detected: Xen PV [ 0.000462] tsc: Detected 2199.998 MHz processor [ 0.000903] e820: update [mem 0x00000000-0x00000fff] usable ==> reserved [ 0.000906] e820: remove [mem 0x000a0000-0x000fffff] usable [ 0.000913] last_pfn = 0x20066 max_arch_pfn = 0x400000000 [ 0.000915] Disabled [ 0.000916] x86/PAT: MTRRs disabled, skipping PAT initialization too. [ 0.000920] x86/PAT: Configuration [0-7]: WB WT UC- UC WC WP UC UC [ 0.000959] Kernel/User page tables isolation: disabled on XEN PV. [ 0.027860] RAMDISK: [mem 0x04000000-0x0536afff] [ 0.027868] ACPI: Early table checksum verification disabled [ 0.028468] ACPI: RSDP 0x00000000000F0580 000024 (v02 SUPERM) [ 0.028480] ACPI: XSDT 0x00000000799FF098 0000B4 (v01 SUPERM SMCI--MB 01072009 AMI 00010013) [ 0.028516] ACPI: FACP 0x0000000079A17AC0 00010C (v05 SUPERM SMCI--MB 01072009 AMI 00010013) [ 0.028564] ACPI: DSDT 0x00000000799FF1E8 0188D5 (v02 SUPERM SMCI--MB 01072009 INTL 20091013) [ 0.028580] ACPI: FACS 0x0000000079E59F80 000040 [ 0.028596] ACPI: APIC 0x0000000079A17BD0 0000BC (v03 SUPERM SMCI--MB 01072009 AMI 00010013) [ 0.028612] ACPI: FPDT 0x0000000079A17C90 000044 (v01 SUPERM SMCI--MB 01072009 AMI 00010013) [ 0.028628] ACPI: FIDT 0x0000000079A17CD8 00009C (v01 SUPERM SMCI--MB 01072009 AMI 00010013) [ 0.028644] ACPI: MCFG 0x0000000079A17D78 00003C (v01 SUPERM SMCI--MB 01072009 MSFT 00000097) [ 0.028668] ACPI: UEFI 0x0000000079A17DB8 000042 (v01 00000000 00000000) [ 0.028684] ACPI: DBG2 0x0000000079A17E00 000072 (v00 SUPERM SMCI--MB 00000000 INTL 20091013) [ 0.028700] ACPI: HPET 0x0000000079A17E78 000038 (v01 SUPERM SMCI--MB 00000001 INTL 20091013) [ 0.028716] ACPI: WDDT 0x0000000079A17EB0 000040 (v01 SUPERM SMCI--MB 00000000 INTL 20091013) [ 0.028732] ACPI: SSDT 0x0000000079A17EF0 00ED8B (v01 AMI PmMgt 00000001 INTL 20120913) [ 0.028748] ACPI: SSDT 0x0000000079A26C80 002285 (v02 SUPERM SpsNm 00000002 INTL 20120913) [ 0.028764] ACPI: SSDT 0x0000000079A28F08 000064 (v02 SUPERM SpsNvs 00000002 INTL 20120913) [ 0.028782] ACPI: PRAD 0x0000000079A28F70 000102 (v02 SUPERM SMCI--MB 00000002 INTL 20120913) [ 0.028798] ACPI: RMAD 0x0000000079A29078 0000CC (v01 SUPERM SMCI--MB 00000001 INTL 20091013) [ 0.028814] ACPI: HEST 0x0000000079A29148 0000A8 (v01 SUPERM SMCI--MB 00000001 INTL 00000001) [ 0.028830] ACPI: BERT 0x0000000079A291F0 000030 (v01 SUPERM SMCI--MB 00000001 INTL 00000001) [ 0.028846] ACPI: ERST 0x0000000079A29220 000230 (v01 SUPERM SMCI--MB 00000001 INTL 00000001) [ 0.028862] ACPI: EINJ 0x0000000079A29450 000130 (v01 SUPERM SMCI--MB 00000001 INTL 00000001) [ 0.028870] ACPI: Reserving FACP table memory at [mem 0x79a17ac0-0x79a17bcb] [ 0.028872] ACPI: Reserving DSDT table memory at [mem 0x799ff1e8-0x79a17abc] [ 0.028873] ACPI: Reserving FACS table memory at [mem 0x79e59f80-0x79e59fbf] [ 0.028874] ACPI: Reserving APIC table memory at [mem 0x79a17bd0-0x79a17c8b] [ 0.028875] ACPI: Reserving FPDT table memory at [mem 0x79a17c90-0x79a17cd3] [ 0.028876] ACPI: Reserving FIDT table memory at [mem 0x79a17cd8-0x79a17d73] [ 0.028877] ACPI: Reserving MCFG table memory at [mem 0x79a17d78-0x79a17db3] [ 0.028878] ACPI: Reserving UEFI table memory at [mem 0x79a17db8-0x79a17df9] [ 0.028879] ACPI: Reserving DBG2 table memory at [mem 0x79a17e00-0x79a17e71] [ 0.028880] ACPI: Reserving HPET table memory at [mem 0x79a17e78-0x79a17eaf] [ 0.028881] ACPI: Reserving WDDT table memory at [mem 0x79a17eb0-0x79a17eef] [ 0.028882] ACPI: Reserving SSDT table memory at [mem 0x79a17ef0-0x79a26c7a] [ 0.028883] ACPI: Reserving SSDT table memory at [mem 0x79a26c80-0x79a28f04] [ 0.028884] ACPI: Reserving SSDT table memory at [mem 0x79a28f08-0x79a28f6b] [ 0.028885] ACPI: Reserving PRAD table memory at [mem 0x79a28f70-0x79a29071] [ 0.028885] ACPI: Reserving RMAD table memory at [mem 0x79a29078-0x79a29143] [ 0.028886] ACPI: Reserving HEST table memory at [mem 0x79a29148-0x79a291ef] [ 0.028887] ACPI: Reserving BERT table memory at [mem 0x79a291f0-0x79a2921f] [ 0.028888] ACPI: Reserving ERST table memory at [mem 0x79a29220-0x79a2944f] [ 0.028889] ACPI: Reserving EINJ table memory at [mem 0x79a29450-0x79a2957f] [ 0.028935] Setting APIC routing to Xen PV. [ 0.032883] Zone ranges: [ 0.032884] DMA [mem 0x0000000000001000-0x0000000000ffffff] [ 0.032887] DMA32 [mem 0x0000000001000000-0x0000000020065fff] [ 0.032889] Normal empty [ 0.032890] Movable zone start for each node [ 0.032891] Early memory node ranges [ 0.032891] node 0: [mem 0x0000000000001000-0x0000000000099fff] [ 0.032893] node 0: [mem 0x0000000000100000-0x0000000020065fff] [ 0.032895] Initmem setup node 0 [mem 0x0000000000001000-0x0000000020065fff] [ 0.032900] On node 0, zone DMA: 1 pages in unavailable ranges [ 0.032938] On node 0, zone DMA: 102 pages in unavailable ranges [ 0.034483] On node 0, zone DMA32: 32666 pages in unavailable ranges [ 0.034487] p2m virtual area at (____ptrval____), size is 40000000 [ 0.222037] Remapped 102 page(s) [ 0.223420] ACPI: PM-Timer IO Port: 0x408 [ 0.223473] ACPI: LAPIC_NMI (acpi_id[0x00] high level lint[0x1]) [ 0.223476] ACPI: LAPIC_NMI (acpi_id[0x02] high level lint[0x1]) [ 0.223478] ACPI: LAPIC_NMI (acpi_id[0x04] high level lint[0x1]) [ 0.223479] ACPI: LAPIC_NMI (acpi_id[0x06] high level lint[0x1]) [ 0.223481] ACPI: LAPIC_NMI (acpi_id[0x01] high level lint[0x1]) [ 0.223482] ACPI: LAPIC_NMI (acpi_id[0x03] high level lint[0x1]) [ 0.223483] ACPI: LAPIC_NMI (acpi_id[0x05] high level lint[0x1]) [ 0.223485] ACPI: LAPIC_NMI (acpi_id[0x07] high level lint[0x1]) [ 0.223513] IOAPIC[0]: apic_id 8, version 32, address 0xfec00000, GSI 0-23 [ 0.223526] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl) [ 0.223530] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level) [ 0.223556] ACPI: Using ACPI (MADT) for SMP configuration information [ 0.223561] ACPI: HPET id: 0x8086a701 base: 0xfed00000 [ 0.223632] smpboot: Allowing 8 CPUs, 0 hotplug CPUs [ 0.223646] PM: hibernation: Registered nosave memory: [mem 0x00000000-0x00000fff] [ 0.223648] PM: hibernation: Registered nosave memory: [mem 0x0009a000-0x0009afff] [ 0.223650] PM: hibernation: Registered nosave memory: [mem 0x0009b000-0x000fffff] [ 0.223651] [mem 0x90000000-0xfbffbfff] available for PCI devices [ 0.223656] Booting kernel on Xen [ 0.223657] Xen version: 4.19-unstable (preserve-AD) [ 0.223660] clocksource: refined-jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 1910969940391419 ns [ 0.229864] setup_percpu: NR_CPUS:64 nr_cpumask_bits:8 nr_cpu_ids:8 nr_node_ids:1 [ 0.230146] percpu: Embedded 54 pages/cpu s180520 r8192 d32472 u262144 [ 0.230153] pcpu-alloc: s180520 r8192 d32472 u262144 alloc=1*2097152 [ 0.230156] pcpu-alloc: [0] 0 1 2 3 4 5 6 7 [ 0.230234] xen: PV spinlocks enabled [ 0.230237] PV qspinlock hash table entries: 256 (order: 0, 4096 bytes, linear) [ 0.230242] Built 1 zonelists, mobility grouping on. Total pages: 129006 [ 0.230244] Kernel command line: placeholder root=/dev/mapper/debina0--vg-root ro console=hvc0 [ 0.230282] Unknown kernel command line parameters "placeholder", will be passed to user space. [ 0.230292] random: crng init done [ 0.230341] Dentry cache hash table entries: 65536 (order: 7, 524288 bytes, linear) [ 0.230366] Inode-cache hash table entries: 32768 (order: 6, 262144 bytes, linear) [ 0.231685] mem auto-init: stack:all(zero), heap alloc:off, heap free:off [ 0.231688] software IO TLB: area num 8. [ 0.294136] Memory: 390032K/524284K available (14349K kernel code, 2682K rwdata, 4576K rodata, 1576K init, 1296K bss, 134000K reserved, 0K cma-reserved) [ 0.294305] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=8, Nodes=1 [ 0.296797] Dynamic Preempt: voluntary [ 0.296896] rcu: Preemptible hierarchical RCU implementation. [ 0.296897] rcu: RCU event tracing is enabled. [ 0.296898] rcu: RCU restricting CPUs from NR_CPUS=64 to nr_cpu_ids=8. [ 0.296900] Trampoline variant of Tasks RCU enabled. [ 0.296901] rcu: RCU calculated value of scheduler-enlistment delay is 100 jiffies. [ 0.296902] rcu: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=8 [ 0.307426] NR_IRQS: 4352, nr_irqs: 488, preallocated irqs: 16 [ 0.307549] xen:events: Using FIFO-based ABI [ 0.307576] xen: --> pirq=1 -> irq=1 (gsi=1) [ 0.307585] xen: --> pirq=2 -> irq=2 (gsi=2) [ 0.307592] xen: --> pirq=3 -> irq=3 (gsi=3) [ 0.307600] xen: --> pirq=4 -> irq=4 (gsi=4) [ 0.307607] xen: --> pirq=5 -> irq=5 (gsi=5) [ 0.307615] xen: --> pirq=6 -> irq=6 (gsi=6) [ 0.307622] xen: --> pirq=7 -> irq=7 (gsi=7) [ 0.307630] xen: --> pirq=8 -> irq=8 (gsi=8) [ 0.307637] xen: --> pirq=9 -> irq=9 (gsi=9) [ 0.307644] xen: --> pirq=10 -> irq=10 (gsi=10) [ 0.307652] xen: --> pirq=11 -> irq=11 (gsi=11) [ 0.307659] xen: --> pirq=12 -> irq=12 (gsi=12) [ 0.307667] xen: --> pirq=13 -> irq=13 (gsi=13) [ 0.307674] xen: --> pirq=14 -> irq=14 (gsi=14) [ 0.307682] xen: --> pirq=15 -> irq=15 (gsi=15) [ 0.307693] rcu: srcu_init: Setting srcu_struct sizes based on contention. [ 0.313057] Console: colour VGA+ 80x25 [ 0.327892] printk: console [tty0] enabled [ 0.329175] printk: console [hvc0] enabled [ 0.329296] ACPI: Core revision 20220331 [ 0.343279] clocksource: xen: mask: 0xffffffffffffffff max_cycles: 0x1cd42e4dffb, max_idle_ns: 881590591483 ns [ 0.343445] Xen: using vcpuop timer interface [ 0.343450] installing Xen timer for CPU 0 [ 0.343593] clocksource: tsc-early: mask: 0xffffffffffffffff max_cycles: 0x1fb63109b96, max_idle_ns: 440795265316 ns [ 0.343752] Calibrating delay loop (skipped), value calculated using timer frequency.. 4399.99 BogoMIPS (lpj=2199998) [ 0.344077] Last level iTLB entries: 4KB 64, 2MB 8, 4MB 8 [ 0.344195] Last level dTLB entries: 4KB 64, 2MB 0, 4MB 0, 1GB 4 [ 0.344322] Spectre V1 : Mitigation: usercopy/swapgs barriers and __user pointer sanitization [ 0.344472] Spectre V2 : Mitigation: Retpolines [ 0.344758] Spectre V2 : Spectre v2 / SpectreRSB mitigation: Filling RSB on context switch [ 0.344904] Spectre V2 : Spectre v2 / SpectreRSB : Filling RSB on VMEXIT [ 0.345030] Spectre V2 : Enabling Restricted Speculation for firmware calls [ 0.345152] Spectre V2 : mitigation: Enabling conditional Indirect Branch Prediction Barrier [ 0.345301] Spectre V2 : User space: Mitigation: STIBP via prctl [ 0.345419] Speculative Store Bypass: Mitigation: Speculative Store Bypass disabled via prctl [ 0.345572] MDS: Mitigation: Clear CPU buffers [ 0.345685] TAA: Mitigation: Clear CPU buffers [ 0.345756] MMIO Stale Data: Vulnerable: Clear CPU buffers attempted, no microcode [ 0.345921] x86/fpu: Supporting XSAVE feature 0x001: 'x87 floating point registers' [ 0.346067] x86/fpu: Supporting XSAVE feature 0x002: 'SSE registers' [ 0.346187] x86/fpu: Supporting XSAVE feature 0x004: 'AVX registers' [ 0.346314] x86/fpu: xstate_offset[2]: 576, xstate_sizes[2]: 256 [ 0.346434] x86/fpu: Enabled xstate features 0x7, context size is 832 bytes, using 'standard' format. [ 0.364079] Freeing SMP alternatives memory: 40K [ 0.364215] pid_max: default: 32768 minimum: 301 [ 0.364773] LSM: Security Framework initializing [ 0.364896] SELinux: Initializing. [ 0.365035] Mount-cache hash table entries: 1024 (order: 1, 8192 bytes, linear) [ 0.365182] Mountpoint-cache hash table entries: 1024 (order: 1, 8192 bytes, linear) [ 0.365843] cpu 0 spinlock event irq 25 [ 0.365963] VPMU disabled by hypervisor. [ 0.366398] cblist_init_generic: Setting adjustable number of callback queues. [ 0.366545] cblist_init_generic: Setting shift to 3 and lim to 1. [ 0.366701] Performance Events: unsupported p6 CPU model 86 no PMU driver, software events only. [ 0.366757] signal: max sigframe size: 1776 [ 0.366921] rcu: Hierarchical SRCU implementation. [ 0.367045] rcu: Max phase no-delay instances is 400. [ 0.367539] smp: Bringing up secondary CPUs ... [ 0.367872] installing Xen timer for CPU 1 [ 0.368791] cpu 1 spinlock event irq 35 [ 0.369508] MDS CPU bug present and SMT on, data leak possible. See https://www.kernel.org/doc/html/latest/admin-guide/hw-vuln/mds.html for more details. [ 0.369758] TAA CPU bug present and SMT on, data leak possible. See https://www.kernel.org/doc/html/latest/admin-guide/hw-vuln/tsx_async_abort.html for more details. [ 0.369947] MMIO Stale Data CPU bug present and SMT on, data leak possible. See https://www.kernel.org/doc/html/latest/admin-guide/hw-vuln/processor_mmio_stale_data.html for more details. [ 0.370363] installing Xen timer for CPU 2 [ 0.370812] cpu 2 spinlock event irq 41 [ 0.370959] installing Xen timer for CPU 3 [ 0.371419] cpu 3 spinlock event irq 47 [ 0.371963] installing Xen timer for CPU 4 [ 0.372459] cpu 4 spinlock event irq 53 [ 0.372955] installing Xen timer for CPU 5 [ 0.373409] cpu 5 spinlock event irq 59 [ 0.373842] installing Xen timer for CPU 6 [ 0.374310] cpu 6 spinlock event irq 65 [ 0.374757] installing Xen timer for CPU 7 [ 0.375246] cpu 7 spinlock event irq 71 [ 0.375246] smp: Brought up 1 node, 8 CPUs [ 0.375755] smpboot: Max logical packages: 1 [ 0.375974] devtmpfs: initialized [ 0.375974] x86/mm: Memory block size: 128MB [ 0.376770] ACPI: PM: Registering ACPI NVS region [mem 0x799b7000-0x79e5afff] (4866048 bytes) [ 0.377019] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 1911260446275000 ns [ 0.377175] futex hash table entries: 2048 (order: 5, 131072 bytes, linear) [ 0.377425] PM: RTC time: 21:00:37, date: 2024-06-24 [ 0.377672] NET: Registered PF_NETLINK/PF_ROUTE protocol family [ 0.377795] xen:grant_table: Grant tables using version 1 layout [ 0.377933] Grant table initialized [ 0.378234] audit: initializing netlink subsys (disabled) [ 0.378373] audit: type=2000 audit(1719262837.412:1): state=initialized audit_enabled=0 res=1 [ 0.378763] thermal_sys: Registered thermal governor 'step_wise' [ 0.378766] thermal_sys: Registered thermal governor 'user_space' [ 0.378917] ACPI FADT declares the system doesn't support PCIe ASPM, so disable it [ 0.379352] PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0x80000000-0x8fffffff] (base 0x80000000) [ 0.379507] PCI: MMCONFIG at [mem 0x80000000-0x8fffffff] reserved in E820 [ 0.507542] PCI: Using configuration type 1 for base access [ 0.510241] kprobes: kprobe jump-optimization is enabled. All kprobes are optimized if possible. [ 0.510833] ACPI: Added _OSI(Module Device) [ 0.510950] ACPI: Added _OSI(Processor Device) [ 0.511081] ACPI: Added _OSI(3.0 _SCP Extensions) [ 0.511213] ACPI: Added _OSI(Processor Aggregator Device) [ 0.557530] ACPI: 4 ACPI AML tables successfully acquired and loaded [ 0.560957] xen: registering gsi 9 triggering 0 polarity 0 [ 0.564892] ACPI: Dynamic OEM Table Load: [ 0.572669] ACPI: Interpreter enabled [ 0.572771] ACPI: PM: (supports S0 S4 S5) [ 0.572884] ACPI: Using IOAPIC for interrupt routing [ 0.573032] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug [ 0.573184] PCI: Using E820 reservations for host bridge windows [ 0.573977] ACPI: Enabled 6 GPEs in block 00 to 3F [ 0.610352] ACPI: PCI Root Bridge [UNC0] (domain 0000 [bus ff]) [ 0.610483] acpi PNP0A03:03: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI HPX-Type3] [ 0.610720] acpi PNP0A03:03: _OSC: platform does not support [LTR] [ 0.610908] acpi PNP0A03:03: _OSC: OS now controls [PME PCIeCapability] [ 0.611031] acpi PNP0A03:03: FADT indicates ASPM is unsupported, using BIOS configuration [ 0.611209] PCI host bridge to bus 0000:ff [ 0.611322] pci_bus 0000:ff: root bus resource [bus ff] [ 0.611521] pci 0000:ff:0b.0: [8086:6f81] type 00 class 0x088000 [ 0.611982] pci 0000:ff:0b.1: [8086:6f36] type 00 class 0x110100 [ 0.612413] pci 0000:ff:0b.2: [8086:6f37] type 00 class 0x110100 [ 0.613053] pci 0000:ff:0b.3: [8086:6f76] type 00 class 0x088000 [ 0.613498] pci 0000:ff:0c.0: [8086:6fe0] type 00 class 0x088000 [ 0.613932] pci 0000:ff:0c.1: [8086:6fe1] type 00 class 0x088000 [ 0.614356] pci 0000:ff:0c.2: [8086:6fe2] type 00 class 0x088000 [ 0.614789] pci 0000:ff:0c.3: [8086:6fe3] type 00 class 0x088000 [ 0.615243] pci 0000:ff:0f.0: [8086:6ff8] type 00 class 0x088000 [ 0.615679] pci 0000:ff:0f.4: [8086:6ffc] type 00 class 0x088000 [ 0.616066] pci 0000:ff:0f.5: [8086:6ffd] type 00 class 0x088000 [ 0.616494] pci 0000:ff:0f.6: [8086:6ffe] type 00 class 0x088000 [ 0.617070] pci 0000:ff:10.0: [8086:6f1d] type 00 class 0x088000 [ 0.617506] pci 0000:ff:10.1: [8086:6f34] type 00 class 0x110100 [ 0.617945] pci 0000:ff:10.5: [8086:6f1e] type 00 class 0x088000 [ 0.618378] pci 0000:ff:10.6: [8086:6f7d] type 00 class 0x110100 [ 0.618809] pci 0000:ff:10.7: [8086:6f1f] type 00 class 0x088000 [ 0.619238] pci 0000:ff:12.0: [8086:6fa0] type 00 class 0x088000 [ 0.619511] pci 0000:ff:12.1: [8086:6f30] type 00 class 0x110100 [ 0.619975] pci 0000:ff:13.0: [8086:6fa8] type 00 class 0x088000 [ 0.620660] pci 0000:ff:13.1: [8086:6f71] type 00 class 0x088000 [ 0.621109] pci 0000:ff:13.2: [8086:6faa] type 00 class 0x088000 [ 0.621577] pci 0000:ff:13.3: [8086:6fab] type 00 class 0x088000 [ 0.622092] pci 0000:ff:13.4: [8086:6fac] type 00 class 0x088000 [ 0.622562] pci 0000:ff:13.5: [8086:6fad] type 00 class 0x088000 [ 0.623037] pci 0000:ff:13.6: [8086:6fae] type 00 class 0x088000 [ 0.623682] pci 0000:ff:13.7: [8086:6faf] type 00 class 0x088000 [ 0.624071] pci 0000:ff:14.0: [8086:6fb0] type 00 class 0x088000 [ 0.624755] pci 0000:ff:14.1: [8086:6fb1] type 00 class 0x088000 [ 0.625247] pci 0000:ff:14.2: [8086:6fb2] type 00 class 0x088000 [ 0.625728] pci 0000:ff:14.3: [8086:6fb3] type 00 class 0x088000 [ 0.626096] pci 0000:ff:14.4: [8086:6fbc] type 00 class 0x088000 [ 0.626538] pci 0000:ff:14.5: [8086:6fbd] type 00 class 0x088000 [ 0.626969] pci 0000:ff:14.6: [8086:6fbe] type 00 class 0x088000 [ 0.627394] pci 0000:ff:14.7: [8086:6fbf] type 00 class 0x088000 [ 0.627845] pci 0000:ff:15.0: [8086:6fb4] type 00 class 0x088000 [ 0.628510] pci 0000:ff:15.1: [8086:6fb5] type 00 class 0x088000 [ 0.628984] pci 0000:ff:15.2: [8086:6fb6] type 00 class 0x088000 [ 0.629452] pci 0000:ff:15.3: [8086:6fb7] type 00 class 0x088000 [ 0.629985] pci 0000:ff:1e.0: [8086:6f98] type 00 class 0x088000 [ 0.630410] pci 0000:ff:1e.1: [8086:6f99] type 00 class 0x088000 [ 0.630849] pci 0000:ff:1e.2: [8086:6f9a] type 00 class 0x088000 [ 0.631484] pci 0000:ff:1e.3: [8086:6fc0] type 00 class 0x088000 [ 0.631755] pci 0000:ff:1e.4: [8086:6f9c] type 00 class 0x088000 [ 0.632407] pci 0000:ff:1f.0: [8086:6f88] type 00 class 0x088000 [ 0.632853] pci 0000:ff:1f.2: [8086:6f8a] type 00 class 0x088000 [ 0.633286] pci_bus 0000:ff: on NUMA node 0 [ 0.637886] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-fe]) [ 0.638015] acpi PNP0A08:00: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI HPX-Type3] [ 0.638292] acpi PNP0A08:00: _OSC: platform does not support [PME LTR] [ 0.638647] acpi PNP0A08:00: _OSC: OS now controls [PCIeCapability] [ 0.638756] acpi PNP0A08:00: FADT indicates ASPM is unsupported, using BIOS configuration [ 0.639440] PCI host bridge to bus 0000:00 [ 0.639566] pci_bus 0000:00: root bus resource [io 0x0000-0x0cf7 window] [ 0.639688] pci_bus 0000:00: root bus resource [io 0x1000-0xffff window] [ 0.640755] pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff window] [ 0.640915] pci_bus 0000:00: root bus resource [mem 0x90000000-0xfbffbfff window] [ 0.641267] pci_bus 0000:00: root bus resource [bus 00-fe] [ 0.641449] pci 0000:00:00.0: [8086:6f00] type 00 class 0x060000 [ 0.641449] pci 0000:00:01.0: [8086:6f02] type 01 class 0x060400 [ 0.641658] pci 0000:00:01.0: PME# supported from D0 D3hot D3cold [ 0.641750] pci 0000:00:01.1: [8086:6f03] type 01 class 0x060400 [ 0.641750] pci 0000:00:01.1: PME# supported from D0 D3hot D3cold [ 0.642958] pci 0000:00:02.0: [8086:6f04] type 01 class 0x060400 [ 0.643477] pci 0000:00:02.0: PME# supported from D0 D3hot D3cold [ 0.643849] pci 0000:00:02.2: [8086:6f06] type 01 class 0x060400 [ 0.644560] pci 0000:00:02.2: PME# supported from D0 D3hot D3cold [ 0.644946] pci 0000:00:03.0: [8086:6f08] type 01 class 0x060400 [ 0.645472] pci 0000:00:03.0: PME# supported from D0 D3hot D3cold [ 0.645857] pci 0000:00:03.2: [8086:6f0a] type 01 class 0x060400 [ 0.646387] pci 0000:00:03.2: PME# supported from D0 D3hot D3cold [ 0.646779] pci 0000:00:05.0: [8086:6f28] type 00 class 0x088000 [ 0.647558] pci 0000:00:05.1: [8086:6f29] type 00 class 0x088000 [ 0.648376] pci 0000:00:05.2: [8086:6f2a] type 00 class 0x088000 [ 0.649063] pci 0000:00:14.0: [8086:8c31] type 00 class 0x0c0330 [ 0.649282] pci 0000:00:14.0: reg 0x10: [mem 0xfb600000-0xfb60ffff 64bit] [ 0.649760] pci 0000:00:14.0: PME# supported from D3hot D3cold [ 0.650109] pci 0000:00:16.0: [8086:8c3a] type 00 class 0x078000 [ 0.650327] pci 0000:00:16.0: reg 0x10: [mem 0xfb617000-0xfb61700f 64bit] [ 0.650805] pci 0000:00:16.0: PME# supported from D0 D3hot D3cold [ 0.651127] pci 0000:00:16.1: [8086:8c3b] type 00 class 0x078000 [ 0.651346] pci 0000:00:16.1: reg 0x10: [mem 0xfb616000-0xfb61600f 64bit] [ 0.651823] pci 0000:00:16.1: PME# supported from D0 D3hot D3cold [ 0.652393] pci 0000:00:1a.0: [8086:8c2d] type 00 class 0x0c0320 [ 0.652601] pci 0000:00:1a.0: reg 0x10: [mem 0xfb614000-0xfb6143ff] [ 0.653135] pci 0000:00:1a.0: PME# supported from D0 D3hot D3cold [ 0.653458] pci 0000:00:1c.0: [8086:8c10] type 01 class 0x060400 [ 0.654027] pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold [ 0.654228] pci 0000:00:1c.0: Enabling MPC IRBNCE [ 0.654351] pci 0000:00:1c.0: Intel PCH root port ACS workaround enabled [ 0.662930] pci 0000:00:1c.1: [8086:8c12] type 01 class 0x060400 [ 0.663700] pci 0000:00:1c.1: PME# supported from D0 D3hot D3cold [ 0.663834] pci 0000:00:1c.1: Enabling MPC IRBNCE [ 0.664157] pci 0000:00:1c.1: Intel PCH root port ACS workaround enabled [ 0.664453] pci 0000:00:1c.3: [8086:8c16] type 01 class 0x060400 [ 0.665026] pci 0000:00:1c.3: PME# supported from D0 D3hot D3cold [ 0.665223] pci 0000:00:1c.3: Enabling MPC IRBNCE [ 0.665345] pci 0000:00:1c.3: Intel PCH root port ACS workaround enabled [ 0.665632] pci 0000:00:1c.4: [8086:8c18] type 01 class 0x060400 [ 0.666193] pci 0000:00:1c.4: PME# supported from D0 D3hot D3cold [ 0.666389] pci 0000:00:1c.4: Enabling MPC IRBNCE [ 0.666511] pci 0000:00:1c.4: Intel PCH root port ACS workaround enabled [ 0.666852] pci 0000:00:1d.0: [8086:8c26] type 00 class 0x0c0320 [ 0.667051] pci 0000:00:1d.0: reg 0x10: [mem 0xfb613000-0xfb6133ff] [ 0.667601] pci 0000:00:1d.0: PME# supported from D0 D3hot D3cold [ 0.668116] pci 0000:00:1f.0: [8086:8c54] type 00 class 0x060100 [ 0.668899] pci 0000:00:1f.2: [8086:8c02] type 00 class 0x010601 [ 0.669094] pci 0000:00:1f.2: reg 0x10: [io 0xf070-0xf077] [ 0.669253] pci 0000:00:1f.2: reg 0x14: [io 0xf060-0xf063] [ 0.669411] pci 0000:00:1f.2: reg 0x18: [io 0xf050-0xf057] [ 0.669569] pci 0000:00:1f.2: reg 0x1c: [io 0xf040-0xf043] [ 0.669737] pci 0000:00:1f.2: reg 0x20: [io 0xf020-0xf03f] [ 0.670797] pci 0000:00:1f.2: reg 0x24: [mem 0xfb612000-0xfb6127ff] [ 0.671113] pci 0000:00:1f.2: PME# supported from D3hot [ 0.671398] pci 0000:00:1f.3: [8086:8c22] type 00 class 0x0c0500 [ 0.671628] pci 0000:00:1f.3: reg 0x10: [mem 0xfb611000-0xfb6110ff 64bit] [ 0.671880] pci 0000:00:1f.3: reg 0x20: [io 0xf000-0xf01f] [ 0.672266] pci 0000:00:1f.6: [8086:8c24] type 00 class 0x118000 [ 0.672511] pci 0000:00:1f.6: reg 0x10: [mem 0xfb610000-0xfb610fff 64bit] [ 0.673370] pci 0000:00:01.0: PCI bridge to [bus 01] [ 0.673669] pci 0000:00:01.1: PCI bridge to [bus 02] [ 0.673974] pci 0000:03:00.0: [8086:6f50] type 00 class 0x088000 [ 0.674188] pci 0000:03:00.0: reg 0x10: [mem 0xfb506000-0xfb507fff 64bit] [ 0.674977] pci 0000:03:00.1: [8086:6f51] type 00 class 0x088000 [ 0.675192] pci 0000:03:00.1: reg 0x10: [mem 0xfb504000-0xfb505fff 64bit] [ 0.675916] pci 0000:03:00.2: [8086:6f52] type 00 class 0x088000 [ 0.676130] pci 0000:03:00.2: reg 0x10: [mem 0xfb502000-0xfb503fff 64bit] [ 0.677065] pci 0000:03:00.3: [8086:6f53] type 00 class 0x088000 [ 0.677280] pci 0000:03:00.3: reg 0x10: [mem 0xfb500000-0xfb501fff 64bit] [ 0.677988] pci 0000:00:02.0: PCI bridge to [bus 03] [ 0.678124] pci 0000:00:02.0: bridge window [mem 0xfb500000-0xfb5fffff] [ 0.678477] pci 0000:04:00.0: [8086:15ac] type 00 class 0x020000 [ 0.678691] pci 0000:04:00.0: reg 0x10: [mem 0xfbc00000-0xfbdfffff 64bit pref] [ 0.678896] pci 0000:04:00.0: reg 0x20: [mem 0xfbe04000-0xfbe07fff 64bit pref] [ 0.679087] pci 0000:04:00.0: reg 0x30: [mem 0xfb480000-0xfb4fffff pref] [ 0.679655] pci 0000:04:00.0: PME# supported from D0 D3hot D3cold [ 0.679858] pci 0000:04:00.0: reg 0x184: [mem 0x00000000-0x00003fff 64bit] [ 0.679980] pci 0000:04:00.0: VF(n) BAR0 space: [mem 0x00000000-0x000fffff 64bit] (contains BAR0 for 64 VFs) [ 0.680185] pci 0000:04:00.0: reg 0x190: [mem 0x00000000-0x00003fff 64bit] [ 0.680509] pci 0000:04:00.0: VF(n) BAR3 space: [mem 0x00000000-0x000fffff 64bit] (contains BAR3 for 64 VFs) [ 0.681092] pci 0000:04:00.1: [8086:15ac] type 00 class 0x020000 [ 0.681317] pci 0000:04:00.1: reg 0x10: [mem 0xfba00000-0xfbbfffff 64bit pref] [ 0.681604] pci 0000:04:00.1: reg 0x20: [mem 0xfbe00000-0xfbe03fff 64bit pref] [ 0.681795] pci 0000:04:00.1: reg 0x30: [mem 0xfb400000-0xfb47ffff pref] [ 0.682146] pci 0000:04:00.1: PME# supported from D0 D3hot D3cold [ 0.682358] pci 0000:04:00.1: reg 0x184: [mem 0x00000000-0x00003fff 64bit] [ 0.682480] pci 0000:04:00.1: VF(n) BAR0 space: [mem 0x00000000-0x000fffff 64bit] (contains BAR0 for 64 VFs) [ 0.682685] pci 0000:04:00.1: reg 0x190: [mem 0x00000000-0x00003fff 64bit] [ 0.682755] pci 0000:04:00.1: VF(n) BAR3 space: [mem 0x00000000-0x000fffff 64bit] (contains BAR3 for 64 VFs) [ 0.683325] pci 0000:00:02.2: PCI bridge to [bus 04] [ 0.683460] pci 0000:00:02.2: bridge window [mem 0xfb400000-0xfb4fffff] [ 0.683599] pci 0000:00:02.2: bridge window [mem 0xfba00000-0xfbefffff 64bit pref] [ 0.683895] pci 0000:00:03.0: PCI bridge to [bus 05] [ 0.684408] pci 0000:00:03.2: PCI bridge to [bus 06] [ 0.684789] pci 0000:07:00.0: working around ROM BAR overlap defect [ 0.684909] pci 0000:07:00.0: [8086:1533] type 00 class 0x020000 [ 0.685117] pci 0000:07:00.0: reg 0x10: [mem 0xfb300000-0xfb37ffff] [ 0.685334] pci 0000:07:00.0: reg 0x18: [io 0xe000-0xe01f] [ 0.685503] pci 0000:07:00.0: reg 0x1c: [mem 0xfb380000-0xfb383fff] [ 0.685503] pci 0000:07:00.0: PME# supported from D0 D3hot D3cold [ 0.685527] pci 0000:00:1c.0: PCI bridge to [bus 07] [ 0.685654] pci 0000:00:1c.0: bridge window [io 0xe000-0xefff] [ 0.685750] pci 0000:00:1c.0: bridge window [mem 0xfb300000-0xfb3fffff] [ 0.685750] pci 0000:08:00.0: working around ROM BAR overlap defect [ 0.685750] pci 0000:08:00.0: [8086:1533] type 00 class 0x020000 [ 0.685750] pci 0000:08:00.0: reg 0x10: [mem 0xfb200000-0xfb27ffff] [ 0.686853] pci 0000:08:00.0: reg 0x18: [io 0xd000-0xd01f] [ 0.687019] pci 0000:08:00.0: reg 0x1c: [mem 0xfb280000-0xfb283fff] [ 0.687761] pci 0000:08:00.0: PME# supported from D0 D3hot D3cold [ 0.688232] pci 0000:00:1c.1: PCI bridge to [bus 08] [ 0.688361] pci 0000:00:1c.1: bridge window [io 0xd000-0xdfff] [ 0.688501] pci 0000:00:1c.1: bridge window [mem 0xfb200000-0xfb2fffff] [ 0.688846] pci 0000:09:00.0: [1a03:1150] type 01 class 0x060400 [ 0.689246] pci 0000:09:00.0: enabling Extended Tags [ 0.689598] pci 0000:09:00.0: supports D1 D2 [ 0.689712] pci 0000:09:00.0: PME# supported from D0 D1 D2 D3hot D3cold [ 0.689994] pci 0000:00:1c.3: PCI bridge to [bus 09-0a] [ 0.690121] pci 0000:00:1c.3: bridge window [io 0xc000-0xcfff] [ 0.690257] pci 0000:00:1c.3: bridge window [mem 0xfa000000-0xfb0fffff] [ 0.690571] pci_bus 0000:0a: extended config space not accessible [ 0.690744] pci 0000:0a:00.0: [1a03:2000] type 00 class 0x030000 [ 0.690951] pci 0000:0a:00.0: reg 0x10: [mem 0xfa000000-0xfaffffff] [ 0.691304] pci 0000:0a:00.0: reg 0x14: [mem 0xfb000000-0xfb01ffff] [ 0.691479] pci 0000:0a:00.0: reg 0x18: [io 0xc000-0xc07f] [ 0.691837] pci 0000:0a:00.0: Video device with shadowed ROM at [mem 0x000c0000-0x000dffff] [ 0.692129] pci 0000:0a:00.0: supports D1 D2 [ 0.692242] pci 0000:0a:00.0: PME# supported from D0 D1 D2 D3hot D3cold [ 0.692690] pci 0000:09:00.0: PCI bridge to [bus 0a] [ 0.693778] pci 0000:09:00.0: bridge window [io 0xc000-0xcfff] [ 0.693909] pci 0000:09:00.0: bridge window [mem 0xfa000000-0xfb0fffff] [ 0.694309] pci 0000:0b:00.0: [8086:1521] type 00 class 0x020000 [ 0.694510] pci 0000:0b:00.0: reg 0x10: [mem 0xfb160000-0xfb17ffff] [ 0.694720] pci 0000:0b:00.0: reg 0x18: [io 0xb060-0xb07f] [ 0.694804] pci 0000:0b:00.0: reg 0x1c: [mem 0xfb18c000-0xfb18ffff] [ 0.695329] pci 0000:0b:00.0: PME# supported from D0 D3hot D3cold [ 0.695565] pci 0000:0b:00.0: reg 0x184: [mem 0x00000000-0x00003fff 64bit pref] [ 0.695722] pci 0000:0b:00.0: VF(n) BAR0 space: [mem 0x00000000-0x0001ffff 64bit pref] (contains BAR0 for 8 VFs) [ 0.695819] pci 0000:0b:00.0: reg 0x190: [mem 0x00000000-0x00003fff 64bit pref] [ 0.695964] pci 0000:0b:00.0: VF(n) BAR3 space: [mem 0x00000000-0x0001ffff 64bit pref] (contains BAR3 for 8 VFs) [ 0.696548] pci 0000:0b:00.1: [8086:1521] type 00 class 0x020000 [ 0.696750] pci 0000:0b:00.1: reg 0x10: [mem 0xfb140000-0xfb15ffff] [ 0.696963] pci 0000:0b:00.1: reg 0x18: [io 0xb040-0xb05f] [ 0.697125] pci 0000:0b:00.1: reg 0x1c: [mem 0xfb188000-0xfb18bfff] [ 0.697650] pci 0000:0b:00.1: PME# supported from D0 D3hot D3cold [ 0.697865] pci 0000:0b:00.1: reg 0x184: [mem 0x00000000-0x00003fff 64bit pref] [ 0.698010] pci 0000:0b:00.1: VF(n) BAR0 space: [mem 0x00000000-0x0001ffff 64bit pref] (contains BAR0 for 8 VFs) [ 0.698229] pci 0000:0b:00.1: reg 0x190: [mem 0x00000000-0x00003fff 64bit pref] [ 0.698374] pci 0000:0b:00.1: VF(n) BAR3 space: [mem 0x00000000-0x0001ffff 64bit pref] (contains BAR3 for 8 VFs) [ 0.698930] pci 0000:0b:00.2: [8086:1521] type 00 class 0x020000 [ 0.699133] pci 0000:0b:00.2: reg 0x10: [mem 0xfb120000-0xfb13ffff] [ 0.699342] pci 0000:0b:00.2: reg 0x18: [io 0xb020-0xb03f] [ 0.699514] pci 0000:0b:00.2: reg 0x1c: [mem 0xfb184000-0xfb187fff] [ 0.700028] pci 0000:0b:00.2: PME# supported from D0 D3hot D3cold [ 0.700262] pci 0000:0b:00.2: reg 0x184: [mem 0x00000000-0x00003fff 64bit pref] [ 0.700408] pci 0000:0b:00.2: VF(n) BAR0 space: [mem 0x00000000-0x0001ffff 64bit pref] (contains BAR0 for 8 VFs) [ 0.700633] pci 0000:0b:00.2: reg 0x190: [mem 0x00000000-0x00003fff 64bit pref] [ 0.700755] pci 0000:0b:00.2: VF(n) BAR3 space: [mem 0x00000000-0x0001ffff 64bit pref] (contains BAR3 for 8 VFs) [ 0.701276] pci 0000:0b:00.3: [8086:1521] type 00 class 0x020000 [ 0.701488] pci 0000:0b:00.3: reg 0x10: [mem 0xfb100000-0xfb11ffff] [ 0.701705] pci 0000:0b:00.3: reg 0x18: [io 0xb000-0xb01f] [ 0.701800] pci 0000:0b:00.3: reg 0x1c: [mem 0xfb180000-0xfb183fff] [ 0.702312] pci 0000:0b:00.3: PME# supported from D0 D3hot D3cold [ 0.702548] pci 0000:0b:00.3: reg 0x184: [mem 0x00000000-0x00003fff 64bit pref] [ 0.702694] pci 0000:0b:00.3: VF(n) BAR0 space: [mem 0x00000000-0x0001ffff 64bit pref] (contains BAR0 for 8 VFs) [ 0.702818] pci 0000:0b:00.3: reg 0x190: [mem 0x00000000-0x00003fff 64bit pref] [ 0.702964] pci 0000:0b:00.3: VF(n) BAR3 space: [mem 0x00000000-0x0001ffff 64bit pref] (contains BAR3 for 8 VFs) [ 0.703560] pci 0000:00:1c.4: PCI bridge to [bus 0b] [ 0.703687] pci 0000:00:1c.4: bridge window [io 0xb000-0xbfff] [ 0.703775] pci 0000:00:1c.4: bridge window [mem 0xfb100000-0xfb1fffff] [ 0.703916] pci 0000:00:1c.4: bridge has subordinate 0b but max busn 0c [ 0.704395] pci_bus 0000:00: on NUMA node 0 [ 0.704492] xen: registering gsi 13 triggering 1 polarity 0 [ 0.705480] ACPI: PCI: Interrupt link LNKA configured for IRQ 11 [ 0.705677] ACPI: PCI: Interrupt link LNKB configured for IRQ 10 [ 0.705830] ACPI: PCI: Interrupt link LNKC configured for IRQ 5 [ 0.706020] ACPI: PCI: Interrupt link LNKD configured for IRQ 11 [ 0.706224] ACPI: PCI: Interrupt link LNKE configured for IRQ 0 [ 0.706344] ACPI: PCI: Interrupt link LNKE disabled [ 0.706531] ACPI: PCI: Interrupt link LNKF configured for IRQ 0 [ 0.706650] ACPI: PCI: Interrupt link LNKF disabled [ 0.706828] ACPI: PCI: Interrupt link LNKG configured for IRQ 0 [ 0.706947] ACPI: PCI: Interrupt link LNKG disabled [ 0.707132] ACPI: PCI: Interrupt link LNKH configured for IRQ 0 [ 0.707253] ACPI: PCI: Interrupt link LNKH disabled [ 0.707522] xen:balloon: Initialising balloon driver [ 0.707849] iommu: Default domain type: Translated [ 0.714757] iommu: DMA domain TLB invalidation policy: lazy mode [ 0.714943] SCSI subsystem initialized [ 0.715775] libata version 3.00 loaded. [ 0.715792] ACPI: bus type USB registered [ 0.715920] usbcore: registered new interface driver usbfs [ 0.716049] usbcore: registered new interface driver hub [ 0.716179] usbcore: registered new device driver usb [ 0.716179] pps_core: LinuxPPS API ver. 1 registered [ 0.716179] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti [ 0.716179] PTP clock support registered [ 0.716801] Advanced Linux Sound Architecture Driver Initialized. [ 0.717061] NetLabel: Initializing [ 0.717173] NetLabel: domain hash size = 128 [ 0.717173] NetLabel: protocols = UNLABELED CIPSOv4 CALIPSO [ 0.717173] NetLabel: unlabeled traffic allowed by default [ 0.717173] PCI: Using ACPI for IRQ routing [ 0.752884] PCI: pci_cache_line_size set to 64 bytes [ 0.753675] e820: reserve RAM buffer [mem 0x0009a000-0x0009ffff] [ 0.753678] e820: reserve RAM buffer [mem 0x20066000-0x23ffffff] [ 0.753795] pci 0000:0a:00.0: vgaarb: setting as boot VGA device [ 0.753917] pci 0000:0a:00.0: vgaarb: bridge control possible [ 0.754035] pci 0000:0a:00.0: vgaarb: VGA device added: decodes=io+mem,owns=io+mem,locks=none [ 0.754184] vgaarb: loaded [ 0.755756] clocksource: Switched to clocksource tsc-early [ 0.755815] VFS: Disk quotas dquot_6.6.0 [ 0.755815] VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes) [ 0.755815] hugetlbfs: disabling because there are no supported hugepage sizes [ 0.755815] pnp: PnP ACPI init [ 0.755815] xen: registering gsi 8 triggering 1 polarity 0 [ 0.755815] system 00:01: [io 0x0500-0x057f] has been reserved [ 0.755815] system 00:01: [io 0x0400-0x047f] has been reserved [ 0.755815] system 00:01: [io 0x0580-0x059f] has been reserved [ 0.755815] system 00:01: [io 0x0600-0x061f] has been reserved [ 0.757595] system 00:01: [io 0x0880-0x0883] has been reserved [ 0.757714] system 00:01: [io 0x0800-0x081f] has been reserved [ 0.757848] system 00:01: [mem 0xfed1c000-0xfed3ffff] could not be reserved [ 0.757970] system 00:01: [mem 0xfed45000-0xfed8bfff] has been reserved [ 0.758091] system 00:01: [mem 0xff000000-0xffffffff] has been reserved [ 0.758212] system 00:01: [mem 0xfee00000-0xfeefffff] has been reserved [ 0.758332] system 00:01: [mem 0xfed12000-0xfed1200f] has been reserved [ 0.758458] system 00:01: [mem 0xfed12010-0xfed1201f] has been reserved [ 0.758596] system 00:01: [mem 0xfed1b000-0xfed1bfff] has been reserved [ 0.759008] system 00:02: [io 0x0a00-0x0a0f] has been reserved [ 0.759132] system 00:02: [io 0x0a10-0x0a1f] has been reserved [ 0.759250] system 00:02: [io 0x0a20-0x0a2f] has been reserved [ 0.759369] system 00:02: [io 0x0a30-0x0a3f] has been reserved [ 0.759488] system 00:02: [io 0x0a40-0x0a4f] has been reserved [ 0.759922] xen: registering gsi 4 triggering 1 polarity 0 [ 0.759927] Already setup the GSI :4 [ 0.760040] pnp 00:03: [dma 0 disabled] [ 0.760346] xen: registering gsi 3 triggering 1 polarity 0 [ 0.760357] pnp 00:04: [dma 0 disabled] [ 0.760955] pnp: PnP ACPI: found 5 devices [ 0.792689] PM-Timer failed consistency check (0xffffff) - aborting. [ 0.792895] NET: Registered PF_INET protocol family [ 0.793056] IP idents hash table entries: 8192 (order: 4, 65536 bytes, linear) [ 0.793424] tcp_listen_portaddr_hash hash table entries: 256 (order: 0, 4096 bytes, linear) [ 0.793576] Table-perturb hash table entries: 65536 (order: 6, 262144 bytes, linear) [ 0.793724] TCP established hash table entries: 4096 (order: 3, 32768 bytes, linear) [ 0.793919] TCP bind hash table entries: 4096 (order: 5, 131072 bytes, linear) [ 0.794107] TCP: Hash tables configured (established 4096 bind 4096) [ 0.794273] UDP hash table entries: 256 (order: 1, 8192 bytes, linear) [ 0.794396] UDP-Lite hash table entries: 256 (order: 1, 8192 bytes, linear) [ 0.794553] NET: Registered PF_UNIX/PF_LOCAL protocol family [ 0.794972] RPC: Registered named UNIX socket transport module. [ 0.795093] RPC: Registered udp transport module. [ 0.795207] RPC: Registered tcp transport module. [ 0.795321] RPC: Registered tcp NFSv4.1 backchannel transport module. [ 0.795887] pci 0000:00:1c.4: bridge window [mem 0x00100000-0x000fffff 64bit pref] to [bus 0b] add_size 100000 add_align 100000 [ 0.796060] clipped [mem size 0x00000000 64bit pref] to [mem size 0xfffffffffffa0000 64bit pref] for e820 entry [mem 0x0009ac00-0x000fffff] [ 0.796225] clipped [mem size 0x00020000 64bit pref] to [mem size 0xfffffffffffc0000 64bit pref] for e820 entry [mem 0x0009ac00-0x000fffff] [ 0.796387] pci 0000:00:1c.4: BAR 15: assigned [mem 0x90000000-0x900fffff 64bit pref] [ 0.796535] pci 0000:00:01.0: PCI bridge to [bus 01] [ 0.796710] pci 0000:00:01.1: PCI bridge to [bus 02] [ 0.796906] pci 0000:00:02.0: PCI bridge to [bus 03] [ 0.797041] pci 0000:00:02.0: bridge window [mem 0xfb500000-0xfb5fffff] [ 0.797204] pci 0000:04:00.0: BAR 7: no space for [mem size 0x00100000 64bit] [ 0.797339] pci 0000:04:00.0: BAR 7: failed to assign [mem size 0x00100000 64bit] [ 0.797485] pci 0000:04:00.0: BAR 10: no space for [mem size 0x00100000 64bit] [ 0.797630] pci 0000:04:00.0: BAR 10: failed to assign [mem size 0x00100000 64bit] [ 0.797794] pci 0000:04:00.1: BAR 7: no space for [mem size 0x00100000 64bit] [ 0.797917] pci 0000:04:00.1: BAR 7: failed to assign [mem size 0x00100000 64bit] [ 0.798063] pci 0000:04:00.1: BAR 10: no space for [mem size 0x00100000 64bit] [ 0.798208] pci 0000:04:00.1: BAR 10: failed to assign [mem size 0x00100000 64bit] [ 0.798354] pci 0000:04:00.0: BAR 7: no space for [mem size 0x00100000 64bit] [ 0.798477] pci 0000:04:00.0: BAR 7: failed to assign [mem size 0x00100000 64bit] [ 0.798623] pci 0000:04:00.0: BAR 10: no space for [mem size 0x00100000 64bit] [ 0.798790] pci 0000:04:00.0: BAR 10: failed to assign [mem size 0x00100000 64bit] [ 0.798936] pci 0000:04:00.1: BAR 7: no space for [mem size 0x00100000 64bit] [ 0.799061] pci 0000:04:00.1: BAR 7: failed to assign [mem size 0x00100000 64bit] [ 0.799207] pci 0000:04:00.1: BAR 10: no space for [mem size 0x00100000 64bit] [ 0.799351] pci 0000:04:00.1: BAR 10: failed to assign [mem size 0x00100000 64bit] [ 0.799498] pci 0000:00:02.2: PCI bridge to [bus 04] [ 0.799632] pci 0000:00:02.2: bridge window [mem 0xfb400000-0xfb4fffff] [ 0.799784] pci 0000:00:02.2: bridge window [mem 0xfba00000-0xfbefffff 64bit pref] [ 0.799956] pci 0000:00:03.0: PCI bridge to [bus 05] [ 0.800136] pci 0000:00:03.2: PCI bridge to [bus 06] [ 0.800311] pci 0000:00:1c.0: PCI bridge to [bus 07] [ 0.800431] pci 0000:00:1c.0: bridge window [io 0xe000-0xefff] [ 0.800571] pci 0000:00:1c.0: bridge window [mem 0xfb300000-0xfb3fffff] [ 0.800732] pci 0000:00:1c.1: PCI bridge to [bus 08] [ 0.800873] pci 0000:00:1c.1: bridge window [io 0xd000-0xdfff] [ 0.801013] pci 0000:00:1c.1: bridge window [mem 0xfb200000-0xfb2fffff] [ 0.801176] pci 0000:09:00.0: PCI bridge to [bus 0a] [ 0.801297] pci 0000:09:00.0: bridge window [io 0xc000-0xcfff] [ 0.801441] pci 0000:09:00.0: bridge window [mem 0xfa000000-0xfb0fffff] [ 0.801624] pci 0000:00:1c.3: PCI bridge to [bus 09-0a] [ 0.801745] pci 0000:00:1c.3: bridge window [io 0xc000-0xcfff] [ 0.801902] pci 0000:00:1c.3: bridge window [mem 0xfa000000-0xfb0fffff] [ 0.802079] pci 0000:0b:00.0: BAR 7: assigned [mem 0x90000000-0x9001ffff 64bit pref] [ 0.802238] pci 0000:0b:00.0: BAR 10: assigned [mem 0x90020000-0x9003ffff 64bit pref] [ 0.802392] pci 0000:0b:00.1: BAR 7: assigned [mem 0x90040000-0x9005ffff 64bit pref] [ 0.802546] pci 0000:0b:00.1: BAR 10: assigned [mem 0x90060000-0x9007ffff 64bit pref] [ 0.802700] pci 0000:0b:00.2: BAR 7: assigned [mem 0x90080000-0x9009ffff 64bit pref] [ 0.802877] pci 0000:0b:00.2: BAR 10: assigned [mem 0x900a0000-0x900bffff 64bit pref] [ 0.803031] pci 0000:0b:00.3: BAR 7: assigned [mem 0x900c0000-0x900dffff 64bit pref] [ 0.803185] pci 0000:0b:00.3: BAR 10: assigned [mem 0x900e0000-0x900fffff 64bit pref] [ 0.803346] pci 0000:00:1c.4: PCI bridge to [bus 0b] [ 0.803466] pci 0000:00:1c.4: bridge window [io 0xb000-0xbfff] [ 0.803606] pci 0000:00:1c.4: bridge window [mem 0xfb100000-0xfb1fffff] [ 0.803740] pci 0000:00:1c.4: bridge window [mem 0x90000000-0x900fffff 64bit pref] [ 0.803931] pci_bus 0000:00: Some PCI device resources are unassigned, try booting with pci=realloc [ 0.804081] pci_bus 0000:00: resource 4 [io 0x0000-0x0cf7 window] [ 0.804202] pci_bus 0000:00: resource 5 [io 0x1000-0xffff window] [ 0.804351] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff window] [ 0.804472] pci_bus 0000:00: resource 7 [mem 0x90000000-0xfbffbfff window] [ 0.804594] pci_bus 0000:03: resource 1 [mem 0xfb500000-0xfb5fffff] [ 0.804714] pci_bus 0000:04: resource 1 [mem 0xfb400000-0xfb4fffff] [ 0.804847] pci_bus 0000:04: resource 2 [mem 0xfba00000-0xfbefffff 64bit pref] [ 0.804993] pci_bus 0000:07: resource 0 [io 0xe000-0xefff] [ 0.805110] pci_bus 0000:07: resource 1 [mem 0xfb300000-0xfb3fffff] [ 0.805230] pci_bus 0000:08: resource 0 [io 0xd000-0xdfff] [ 0.805347] pci_bus 0000:08: resource 1 [mem 0xfb200000-0xfb2fffff] [ 0.805467] pci_bus 0000:09: resource 0 [io 0xc000-0xcfff] [ 0.805584] pci_bus 0000:09: resource 1 [mem 0xfa000000-0xfb0fffff] [ 0.805736] pci_bus 0000:0a: resource 0 [io 0xc000-0xcfff] [ 0.805870] pci_bus 0000:0a: resource 1 [mem 0xfa000000-0xfb0fffff] [ 0.805990] pci_bus 0000:0b: resource 0 [io 0xb000-0xbfff] [ 0.806107] pci_bus 0000:0b: resource 1 [mem 0xfb100000-0xfb1fffff] [ 0.806226] pci_bus 0000:0b: resource 2 [mem 0x90000000-0x900fffff 64bit pref] [ 0.806785] pci 0000:00:05.0: disabled boot interrupts on device [8086:6f28] [ 0.807006] xen: registering gsi 19 triggering 0 polarity 1 [ 0.807033] xen: --> pirq=19 -> irq=19 (gsi=19) [ 0.815886] xen: registering gsi 18 triggering 0 polarity 1 [ 0.815905] xen: --> pirq=18 -> irq=18 (gsi=18) [ 0.833078] pci 0000:00:1a.0: quirk_usb_early_handoff+0x0/0x720 took 16842 usecs [ 0.833324] xen: registering gsi 18 triggering 0 polarity 1 [ 0.833329] Already setup the GSI :18 [ 0.850947] pci 0000:00:1d.0: quirk_usb_early_handoff+0x0/0x720 took 17264 usecs [ 0.851162] pci 0000:04:00.0: CLS mismatch (64 != 32), using 64 bytes [ 0.851304] PCI-DMA: Using software bounce buffering for IO (SWIOTLB) [ 0.851391] Unpacking initramfs... [ 0.851424] software IO TLB: mapped [mem 0x000000001b180000-0x000000001f180000] (64MB) [ 0.851770] kvm: no hardware support for 'kvm_intel' [ 0.859573] has_svm: not amd or hygon [ 0.859689] kvm: no hardware support for 'kvm_amd' [ 0.859823] clocksource: tsc: mask: 0xffffffffffffffff max_cycles: 0x1fb63109b96, max_idle_ns: 440795265316 ns [ 0.860269] clocksource: Switched to clocksource tsc [ 0.862972] Initialise system trusted keyrings [ 0.863251] workingset: timestamp_bits=62 max_order=17 bucket_order=0 [ 0.864796] NFS: Registering the id_resolver key type [ 0.864922] Key type id_resolver registered [ 0.865034] Key type id_legacy registered [ 0.865235] 9p: Installing v9fs 9p2000 file system support [ 0.879548] Key type asymmetric registered [ 0.879675] Asymmetric key parser 'x509' registered [ 0.879814] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 251) [ 0.879970] io scheduler mq-deadline registered [ 0.880095] io scheduler kyber registered [ 0.880976] xen: registering gsi 16 triggering 0 polarity 1 [ 0.881006] xen: --> pirq=16 -> irq=16 (gsi=16) [ 0.881570] xen: registering gsi 16 triggering 0 polarity 1 [ 0.881576] Already setup the GSI :16 [ 0.882221] xen: registering gsi 16 triggering 0 polarity 1 [ 0.882227] Already setup the GSI :16 [ 0.882595] xen: registering gsi 16 triggering 0 polarity 1 [ 0.882600] Already setup the GSI :16 [ 0.882921] xen: registering gsi 16 triggering 0 polarity 1 [ 0.882925] Already setup the GSI :16 [ 0.883552] xen: registering gsi 16 triggering 0 polarity 1 [ 0.883557] Already setup the GSI :16 [ 0.884231] xen: registering gsi 16 triggering 0 polarity 1 [ 0.884236] Already setup the GSI :16 [ 0.884679] xen: registering gsi 17 triggering 0 polarity 1 [ 0.884695] xen: --> pirq=17 -> irq=17 (gsi=17) [ 0.885105] xen: registering gsi 19 triggering 0 polarity 1 [ 0.885110] Already setup the GSI :19 [ 0.885553] xen: registering gsi 16 triggering 0 polarity 1 [ 0.885558] Already setup the GSI :16 [ 0.886247] input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input0 [ 0.886463] ACPI: button: Power Button [PWRB] [ 0.886615] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input1 [ 0.886867] ACPI: button: Power Button [PWRF] [ 0.887179] Monitor-Mwait will be used to enter C-1 state [ 0.887220] Monitor-Mwait will be used to enter C-2 state [ 0.887239] ACPI: \_SB_.SCK0.CP00: Found 2 idle states [ 0.887636] ACPI: \_SB_.SCK0.CP01: Found 2 idle states [ 0.888170] ACPI: \_SB_.SCK0.CP02: Found 2 idle states [ 0.888793] ACPI: \_SB_.SCK0.CP03: Found 2 idle states [ 0.889301] ACPI: \_SB_.SCK0.CP04: Found 2 idle states [ 0.902698] ACPI: \_SB_.SCK0.CP05: Found 2 idle states [ 0.903245] ACPI: \_SB_.SCK0.CP06: Found 2 idle states [ 0.903580] ACPI: \_SB_.SCK0.CP07: Found 2 idle states [ 0.904324] xen:xen_evtchn: Event-channel device installed [ 0.904562] xen_pciback: backend is vpci [ 0.905308] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled [ 0.905620] 00:04: ttyS1 at I/O 0x2f8 (irq = 3, base_baud = 115200) is a 16550A [ 0.906381] hpet_acpi_add: no address or irqs in _CRS [ 0.906622] Non-volatile memory driver v1.3 [ 0.906737] AMD-Vi: AMD IOMMUv2 functionality not available on this system - This is not a bug. [ 0.909848] loop: module loaded [ 0.916858] ahci 0000:00:1f.2: version 3.0 [ 0.917000] xen: registering gsi 16 triggering 0 polarity 1 [ 0.917010] Already setup the GSI :16 [ 0.917353] ahci 0000:00:1f.2: AHCI 0001.0300 32 slots 6 ports 6 Gbps 0x3f impl SATA mode [ 0.917505] ahci 0000:00:1f.2: flags: 64bit ncq led clo pio ems apst [ 0.932759] scsi host0: ahci [ 0.933153] scsi host1: ahci [ 0.933484] scsi host2: ahci [ 0.933826] scsi host3: ahci [ 0.934155] scsi host4: ahci [ 0.934488] scsi host5: ahci [ 0.934633] ata1: SATA max UDMA/133 abar m2048@0xfb612000 port 0xfb612100 irq 75 [ 0.934780] ata2: SATA max UDMA/133 abar m2048@0xfb612000 port 0xfb612180 irq 75 [ 0.934925] ata3: SATA max UDMA/133 abar m2048@0xfb612000 port 0xfb612200 irq 75 [ 0.935095] ata4: SATA max UDMA/133 abar m2048@0xfb612000 port 0xfb612280 irq 75 [ 0.935252] ata5: SATA max UDMA/133 abar m2048@0xfb612000 port 0xfb612300 irq 75 [ 0.935397] ata6: SATA max UDMA/133 abar m2048@0xfb612000 port 0xfb612380 irq 75 [ 0.935947] tun: Universal TUN/TAP device driver, 1.6 [ 0.936277] e100: Intel(R) PRO/100 Network Driver [ 0.936402] e100: Copyright(c) 1999-2006 Intel Corporation [ 0.936539] sky2: driver version 1.30 [ 0.936726] xen_netfront: Initialising Xen virtual ethernet driver [ 0.937108] xen: registering gsi 18 triggering 0 polarity 1 [ 0.937118] Already setup the GSI :18 [ 0.937327] ehci-pci 0000:00:1a.0: EHCI Host Controller [ 0.937527] ehci-pci 0000:00:1a.0: new USB bus registered, assigned bus number 1 [ 0.937704] ehci-pci 0000:00:1a.0: debug port 2 [ 0.941841] ehci-pci 0000:00:1a.0: irq 18, io mem 0xfb614000 [ 0.948131] ehci-pci 0000:00:1a.0: USB 2.0 started, EHCI 1.00 [ 0.948361] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 6.01 [ 0.948511] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 0.948656] usb usb1: Product: EHCI Host Controller [ 0.948771] usb usb1: Manufacturer: Linux 6.1.95+ ehci_hcd [ 0.948894] usb usb1: SerialNumber: 0000:00:1a.0 [ 0.949196] hub 1-0:1.0: USB hub found [ 0.949322] hub 1-0:1.0: 2 ports detected [ 0.949689] xen: registering gsi 18 triggering 0 polarity 1 [ 0.949698] Already setup the GSI :18 [ 0.949891] ehci-pci 0000:00:1d.0: EHCI Host Controller [ 0.950114] ehci-pci 0000:00:1d.0: new USB bus registered, assigned bus number 2 [ 0.950299] ehci-pci 0000:00:1d.0: debug port 2 [ 0.954406] ehci-pci 0000:00:1d.0: irq 18, io mem 0xfb613000 [ 0.957096] Freeing initrd memory: 19884K [ 0.961190] ehci-pci 0000:00:1d.0: USB 2.0 started, EHCI 1.00 [ 0.961546] usb usb2: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 6.01 [ 0.961695] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 0.961840] usb usb2: Product: EHCI Host Controller [ 0.961955] usb usb2: Manufacturer: Linux 6.1.95+ ehci_hcd [ 0.962097] usb usb2: SerialNumber: 0000:00:1d.0 [ 0.962381] hub 2-0:1.0: USB hub found [ 0.962507] hub 2-0:1.0: 2 ports detected [ 0.962946] xen: registering gsi 19 triggering 0 polarity 1 [ 0.962955] Already setup the GSI :19 [ 0.963191] xhci_hcd 0000:00:14.0: xHCI Host Controller [ 0.963394] xhci_hcd 0000:00:14.0: new USB bus registered, assigned bus number 3 [ 0.964613] xhci_hcd 0000:00:14.0: hcc params 0x200077c1 hci version 0x100 quirks 0x0000000000009810 [ 0.965103] xhci_hcd 0000:00:14.0: xHCI Host Controller [ 0.965297] xhci_hcd 0000:00:14.0: new USB bus registered, assigned bus number 4 [ 0.965445] xhci_hcd 0000:00:14.0: Host supports USB 3.0 SuperSpeed [ 0.965657] usb usb3: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 6.01 [ 0.965805] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 0.965950] usb usb3: Product: xHCI Host Controller [ 0.966090] usb usb3: Manufacturer: Linux 6.1.95+ xhci-hcd [ 0.966207] usb usb3: SerialNumber: 0000:00:14.0 [ 0.966505] hub 3-0:1.0: USB hub found [ 0.966638] hub 3-0:1.0: 8 ports detected [ 0.967812] usb usb4: New USB device found, idVendor=1d6b, idProduct=0003, bcdDevice= 6.01 [ 0.967965] usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 0.968131] usb usb4: Product: xHCI Host Controller [ 0.968249] usb usb4: Manufacturer: Linux 6.1.95+ xhci-hcd [ 0.968387] usb usb4: SerialNumber: 0000:00:14.0 [ 0.968654] hub 4-0:1.0: USB hub found [ 0.968786] hub 4-0:1.0: 6 ports detected [ 0.969890] usbcore: registered new interface driver usblp [ 0.970025] usbcore: registered new interface driver usb-storage [ 0.970241] i8042: PNP: No PS/2 controller found. [ 0.970554] rtc_cmos 00:00: RTC can wake from S4 [ 0.971209] rtc_cmos 00:00: registered as rtc0 [ 0.971368] rtc_cmos 00:00: alarms up to one month, y3k, 114 bytes nvram [ 0.971559] device-mapper: uevent: version 1.0.3 [ 0.971653] xen: registering gsi 18 triggering 0 polarity 1 [ 0.971679] Already setup the GSI :18 [ 0.971767] device-mapper: ioctl: 4.47.0-ioctl (2022-07-28) initialised: dm-devel@redhat.com [ 0.971824] i801_smbus 0000:00:1f.3: SPD Write Disable is set [ 0.971945] intel_pstate: CPU model not supported [ 0.971976] i801_smbus 0000:00:1f.3: SMBus using PCI interrupt [ 0.972105] hid: raw HID events driver (C) Jiri Kosina [ 0.972556] usbcore: registered new interface driver usbhid [ 0.972606] i2c i2c-0: 1/4 memory slots populated (from DMI) [ 0.972679] usbhid: USB HID core driver [ 0.973350] Initializing XFRM netlink socket [ 0.973583] NET: Registered PF_INET6 protocol family [ 0.974121] Segment Routing with IPv6 [ 0.974242] In-situ OAM (IOAM) with IPv6 [ 0.974386] sit: IPv6, IPv4 and MPLS over IPv4 tunneling driver [ 0.974622] NET: Registered PF_PACKET protocol family [ 0.974776] 9pnet: Installing 9P2000 support [ 0.974902] Key type dns_resolver registered [ 0.975645] IPI shorthand broadcast: enabled [ 0.975784] sched_clock: Marking stable (939551213, 36054822)->(1821214770, -845608735) [ 0.976361] registered taskstats version 1 [ 0.976478] Loading compiled-in X.509 certificates [ 0.979192] PM: Magic number: 12:992:45 [ 0.979420] printk: console [netcon0] enabled [ 0.979536] netconsole: network logging started [ 0.979874] cfg80211: Loading compiled-in X.509 certificates for regulatory database [ 0.991660] cfg80211: Loaded X.509 cert 'sforshee: 00b28ddf47aef9cea7' [ 0.991999] cfg80211: Loaded X.509 cert 'wens: 61c038651aabdcf94bd0ac7ff06c7248db18c600' [ 0.992684] cfg80211: loaded regulatory.db is malformed or signature is missing/invalid [ 0.992862] ALSA device list: [ 0.992983] No soundcards found. [ 1.185158] usb 1-1: new high-speed USB device number 2 using ehci-pci [ 1.201119] usb 2-1: new high-speed USB device number 2 using ehci-pci [ 1.209180] usb 3-3: new high-speed USB device number 2 using xhci_hcd [ 1.244428] ata1: SATA link down (SStatus 0 SControl 300) [ 1.246204] ata2: SATA link down (SStatus 0 SControl 300) [ 1.246335] ata5: SATA link down (SStatus 0 SControl 300) [ 1.246492] ata3: SATA link up 6.0 Gbps (SStatus 133 SControl 300) [ 1.246639] ata4: SATA link down (SStatus 0 SControl 300) [ 1.246794] ata6: SATA link down (SStatus 0 SControl 300) [ 1.247764] ata3.00: ATA-10: HGST HUS722T1TALA604, RAGNWA05, max UDMA/133 [ 1.321544] usb 1-1: New USB device found, idVendor=8087, idProduct=8008, bcdDevice= 0.05 [ 1.321700] usb 1-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0 [ 1.322097] hub 1-1:1.0: USB hub found [ 1.322294] hub 1-1:1.0: 4 ports detected [ 1.329543] usb 2-1: New USB device found, idVendor=8087, idProduct=8000, bcdDevice= 0.05 [ 1.329699] usb 2-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0 [ 1.330126] hub 2-1:1.0: USB hub found [ 1.330460] hub 2-1:1.0: 4 ports detected [ 1.336782] usb 3-3: New USB device found, idVendor=05e3, idProduct=0610, bcdDevice=32.98 [ 1.337052] usb 3-3: New USB device strings: Mfr=0, Product=1, SerialNumber=0 [ 1.337210] usb 3-3: Product: USB2.0 Hub [ 1.338097] ata3.00: 1953525168 sectors, multi 16: LBA48 NCQ (depth 32), AA [ 1.338242] hub 3-3:1.0: USB hub found [ 1.338340] ata3.00: Features: NCQ-sndrcv NCQ-prio [ 1.338665] hub 3-3:1.0: 4 ports detected [ 1.366143] ata3.00: configured for UDMA/133 [ 1.366641] scsi 2:0:0:0: Direct-Access ATA HGST HUS722T1TAL WA05 PQ: 0 ANSI: 5 [ 1.367605] sd 2:0:0:0: Attached scsi generic sg0 type 0 [ 1.367713] sd 2:0:0:0: [sda] 1953525168 512-byte logical blocks: (1.00 TB/932 GiB) [ 1.367963] sd 2:0:0:0: [sda] Write Protect is off [ 1.368103] sd 2:0:0:0: [sda] Mode Sense: 00 3a 00 00 [ 1.368172] sd 2:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 1.368416] sd 2:0:0:0: [sda] Preferred minimum I/O size 512 bytes [ 1.387219] sda: sda1 sda2 < sda5 > [ 1.387621] sd 2:0:0:0: [sda] Attached SCSI disk [ 1.388871] Freeing unused kernel image (initmem) memory: 1576K [ 1.389000] Write protecting the kernel read-only data: 22528k [ 1.406961] Freeing unused kernel image (text/rodata gap) memory: 2032K [ 1.408251] Freeing unused kernel image (rodata/data gap) memory: 1568K [ 1.455122] usb 3-4: new high-speed USB device number 3 using xhci_hcd [ 1.581395] usb 3-4: New USB device found, idVendor=0557, idProduct=7000, bcdDevice= 0.00 [ 1.581551] usb 3-4: New USB device strings: Mfr=0, Product=0, SerialNumber=0 [ 1.582248] hub 3-4:1.0: USB hub found [ 1.582450] hub 3-4:1.0: 4 ports detected [ 1.645106] usb 3-3.2: new high-speed USB device number 4 using xhci_hcd [ 1.722594] usb 3-3.2: New USB device found, idVendor=05e3, idProduct=0610, bcdDevice=32.98 [ 1.722750] usb 3-3.2: New USB device strings: Mfr=0, Product=1, SerialNumber=0 [ 1.722896] usb 3-3.2: Product: USB2.0 Hub [ 1.723615] hub 3-3.2:1.0: USB hub found [ 1.724090] hub 3-3.2:1.0: 4 ports detected [ 1.870006] x86/mm: Checked W+X mappings: passed, no W+X pages found. [ 1.870143] Run /init as init process [ 1.870255] with arguments: [ 1.870256] /init [ 1.870257] placeholder [ 1.870258] with environment: [ 1.870259] HOME=/ [ 1.870260] TERM=linux [ 1.875099] usb 3-4.1: new low-speed USB device number 5 using xhci_hcd [ 1.979644] usb 3-4.1: New USB device found, idVendor=0557, idProduct=2419, bcdDevice= 1.00 [ 1.979806] usb 3-4.1: New USB device strings: Mfr=0, Product=0, SerialNumber=0 [ 1.985601] input: HID 0557:2419 as /devices/pci0000:00/0000:00:14.0/usb3/3-4/3-4.1/3-4.1:1.0/0003:0557:2419.0001/input/input2 [ 2.037390] hid-generic 0003:0557:2419.0001: input,hidraw0: USB HID v1.00 Keyboard [HID 0557:2419] on usb-0000:00:14.0-4.1/input0 [ 2.040443] input: HID 0557:2419 as /devices/pci0000:00/0000:00:14.0/usb3/3-4/3-4.1/3-4.1:1.1/0003:0557:2419.0002/input/input3 [ 2.040776] hid-generic 0003:0557:2419.0002: input,hidraw1: USB HID v1.00 Mouse [HID 0557:2419] on usb-0000:00:14.0-4.1/input1 [ 2.310438] ixgbe: Intel(R) 10 Gigabit PCI Express Network Driver [ 2.310597] ixgbe: Copyright (c) 1999-2016 Intel Corporation. [ 2.311016] ACPI Warning: \_SB.PCI0.BR2C._PRT: Return Package has no elements (empty) (20220331/nsprepkg-94) [ 2.311323] xen: registering gsi 16 triggering 0 polarity 1 [ 2.311335] Already setup the GSI :16 [ 2.315676] igb: Intel(R) Gigabit Ethernet Network Driver [ 2.315832] igb: Copyright (c) 2007-2014 Intel Corporation. [ 2.316109] xen: registering gsi 16 triggering 0 polarity 1 [ 2.316119] Already setup the GSI :16 [ 2.342686] pps pps0: new PPS source ptp0 [ 2.342890] igb 0000:07:00.0: added PHC on eth0 [ 2.343024] igb 0000:07:00.0: Intel(R) Gigabit Ethernet Network Connection [ 2.343166] igb 0000:07:00.0: eth0: (PCIe:2.5Gb/s:Width x1) 0c:c4:7a:9f:87:be [ 2.343333] igb 0000:07:00.0: eth0: PBA No: 010C00-000 [ 2.343449] igb 0000:07:00.0: Using MSI-X interrupts. 4 rx queue(s), 4 tx queue(s) [ 2.343689] xen: registering gsi 17 triggering 0 polarity 1 [ 2.343699] Already setup the GSI :17 [ 2.373314] pps pps1: new PPS source ptp1 [ 2.373522] igb 0000:08:00.0: added PHC on eth1 [ 2.373656] igb 0000:08:00.0: Intel(R) Gigabit Ethernet Network Connection [ 2.373777] igb 0000:08:00.0: eth1: (PCIe:2.5Gb/s:Width x1) 0c:c4:7a:9f:87:bf [ 2.373944] igb 0000:08:00.0: eth1: PBA No: 010000-000 [ 2.374074] igb 0000:08:00.0: Using MSI-X interrupts. 4 rx queue(s), 4 tx queue(s) [ 2.374306] xen: registering gsi 16 triggering 0 polarity 1 [ 2.374313] Already setup the GSI :16 [ 2.431522] igb 0000:0b:00.0: added PHC on eth2 [ 2.431661] igb 0000:0b:00.0: Intel(R) Gigabit Ethernet Network Connection [ 2.431783] igb 0000:0b:00.0: eth2: (PCIe:5.0Gb/s:Width x4) 0c:c4:7a:9f:87:c0 [ 2.431987] igb 0000:0b:00.0: eth2: PBA No: 010000-000 [ 2.432116] igb 0000:0b:00.0: Using MSI-X interrupts. 8 rx queue(s), 8 tx queue(s) [ 2.432345] xen: registering gsi 17 triggering 0 polarity 1 [ 2.432354] Already setup the GSI :17 [ 2.490071] igb 0000:0b:00.1: added PHC on eth3 [ 2.490214] igb 0000:0b:00.1: Intel(R) Gigabit Ethernet Network Connection [ 2.490336] igb 0000:0b:00.1: eth3: (PCIe:5.0Gb/s:Width x4) 0c:c4:7a:9f:87:c1 [ 2.490540] igb 0000:0b:00.1: eth3: PBA No: 010000-000 [ 2.490656] igb 0000:0b:00.1: Using MSI-X interrupts. 8 rx queue(s), 8 tx queue(s) [ 2.490906] xen: registering gsi 18 triggering 0 polarity 1 [ 2.490915] Already setup the GSI :18 [ 2.548945] igb 0000:0b:00.2: added PHC on eth4 [ 2.549149] igb 0000:0b:00.2: Intel(R) Gigabit Ethernet Network Connection [ 2.549303] igb 0000:0b:00.2: eth4: (PCIe:5.0Gb/s:Width x4) 0c:c4:7a:9f:87:c2 [ 2.549541] igb 0000:0b:00.2: eth4: PBA No: 010000-000 [ 2.549686] igb 0000:0b:00.2: Using MSI-X interrupts. 8 rx queue(s), 8 tx queue(s) [ 2.550000] xen: registering gsi 19 triggering 0 polarity 1 [ 2.550011] Already setup the GSI :19 [ 2.608488] igb 0000:0b:00.3: added PHC on eth5 [ 2.608626] igb 0000:0b:00.3: Intel(R) Gigabit Ethernet Network Connection [ 2.608755] igb 0000:0b:00.3: eth5: (PCIe:5.0Gb/s:Width x4) 0c:c4:7a:9f:87:c3 [ 2.608959] igb 0000:0b:00.3: eth5: PBA No: 010000-000 [ 2.609090] igb 0000:0b:00.3: Using MSI-X interrupts. 8 rx queue(s), 8 tx queue(s) [ 2.611918] igb 0000:08:00.0 enx0cc47a9f87bf: renamed from eth1 [ 2.620598] igb 0000:07:00.0 enx0cc47a9f87be: renamed from eth0 [ 2.633557] igb 0000:0b:00.0 enx0cc47a9f87c0: renamed from eth2 [ 2.642269] igb 0000:0b:00.2 enx0cc47a9f87c2: renamed from eth4 [ 2.650279] igb 0000:0b:00.1 enx0cc47a9f87c1: renamed from eth3 [ 2.663658] igb 0000:0b:00.3 enx0cc47a9f87c3: renamed from eth5 [ 3.050308] ixgbe 0000:04:00.0: Multiqueue Enabled: Rx Queue count = 8, Tx Queue count = 8 XDP Queue count = 0 [ 3.180267] ixgbe 0000:04:00.0: MAC: 5, PHY: 0, PBA No: 020B00-000 [ 3.180397] ixgbe 0000:04:00.0: 0c:c4:7a:9f:8f:b6 [ 3.483638] ixgbe 0000:04:00.0: Intel(R) 10 Gigabit Network Connection [ 3.484000] ACPI Warning: \_SB.PCI0.BR2C._PRT: Return Package has no elements (empty) (20220331/nsprepkg-94) [ 3.484260] xen: registering gsi 17 triggering 0 polarity 1 [ 3.484271] Already setup the GSI :17 [ 4.218353] ixgbe 0000:04:00.1: Multiqueue Enabled: Rx Queue count = 8, Tx Queue count = 8 XDP Queue count = 0 [ 4.357095] ixgbe 0000:04:00.1: MAC: 5, PHY: 0, PBA No: 020B00-000 [ 4.357257] ixgbe 0000:04:00.1: 0c:c4:7a:9f:8f:b7 [ 4.653117] ixgbe 0000:04:00.1: Intel(R) 10 Gigabit Network Connection [ 4.655899] ixgbe 0000:04:00.1 enx0cc47a9f8fb7: renamed from eth1 [ 4.670672] ixgbe 0000:04:00.0 enx0cc47a9f8fb6: renamed from eth0 [ 5.072921] EXT4-fs (dm-0): mounting ext3 file system using the ext4 subsystem [ 5.080391] EXT4-fs (dm-0): mounted filesystem with ordered data mode. Quota mode: none. [ 8.646277] EXT4-fs (dm-0): re-mounted. Quota mode: none. [ 9.814130] EXT4-fs (sda1): mounting ext3 file system using the ext4 subsystem [ 9.832519] EXT4-fs (sda1): mounted filesystem with ordered data mode. Quota mode: none. [ 9.910951] Adding 1949692k swap on /dev/mapper/debina0--vg-swap_1. Priority:-2 extents:1 across:1949692k [ 11.488822] xenbr0: port 1(enx0cc47a9f87be) entered blocking state [ 11.488994] xenbr0: port 1(enx0cc47a9f87be) entered disabled state [ 11.489197] device enx0cc47a9f87be entered promiscuous mode [ 15.036736] igb 0000:07:00.0 enx0cc47a9f87be: igb: enx0cc47a9f87be NIC Link is Up 1000 Mbps Full Duplex, Flow Control: RX [ 15.143409] IPv6: ADDRCONF(NETDEV_CHANGE): enx0cc47a9f87be: link becomes ready [ 15.143620] xenbr0: port 1(enx0cc47a9f87be) entered blocking state [ 15.143744] xenbr0: port 1(enx0cc47a9f87be) entered forwarding state [ 15.144018] IPv6: ADDRCONF(NETDEV_CHANGE): xenbr0: link becomes ready