[ 0.000000] Linux version 6.10.0-rc5+ (osstest@himrod2) (gcc (Debian 12.2.0-14) 12.2.0, GNU ld (GNU Binutils for Debian) 2.40) #1 SMP PREEMPT_DYNAMIC Tue Jun 25 02:49:46 UTC 2024 [ 0.000000] Command line: placeholder root=/dev/mapper/debina1--vg-root ro console=hvc0 [ 0.000000] Released 0 page(s) [ 0.000000] BIOS-provided physical RAM map: [ 0.000000] Xen: [mem 0x0000000000000000-0x0000000000099fff] usable [ 0.000000] Xen: [mem 0x000000000009ac00-0x00000000000fffff] reserved [ 0.000000] Xen: [mem 0x0000000000100000-0x0000000020065fff] usable [ 0.000000] Xen: [mem 0x00000000796ef000-0x00000000798bdfff] reserved [ 0.000000] Xen: [mem 0x00000000799b7000-0x0000000079e5afff] ACPI NVS [ 0.000000] Xen: [mem 0x0000000079e5b000-0x000000007bdb0fff] reserved [ 0.000000] Xen: [mem 0x000000007bdb2000-0x000000007be37fff] reserved [ 0.000000] Xen: [mem 0x0000000080000000-0x000000008fffffff] reserved [ 0.000000] Xen: [mem 0x00000000fbffc000-0x00000000fbffcfff] reserved [ 0.000000] Xen: [mem 0x00000000fec00000-0x00000000fec00fff] reserved [ 0.000000] Xen: [mem 0x00000000fed1c000-0x00000000fed1ffff] reserved [ 0.000000] Xen: [mem 0x00000000fee00000-0x00000000feefffff] reserved [ 0.000000] Xen: [mem 0x00000000ff000000-0x00000000ffffffff] reserved [ 0.000000] NX (Execute Disable) protection: active [ 0.000000] APIC: Static calls initialized [ 0.000000] SMBIOS 2.8 present. [ 0.000000] DMI: Supermicro SYS-5018D-FN8T/X10SDV-TP8F, BIOS 1.0b 11/21/2016 [ 0.000000] DMI: Memory slots populated: 1/4 [ 0.000000] Hypervisor detected: Xen PV [ 0.000029] Xen PV: Detected 8 vCPUS [ 0.000486] tsc: Detected 2199.996 MHz processor [ 0.000920] e820: update [mem 0x00000000-0x00000fff] usable ==> reserved [ 0.000923] e820: remove [mem 0x000a0000-0x000fffff] usable [ 0.000930] last_pfn = 0x20066 max_arch_pfn = 0x400000000 [ 0.000933] MTRR map: 2 entries (0 fixed + 2 variable; max 20), built from 10 variable MTRRs [ 0.000934] MTRRs set to read-only [ 0.000938] x86/PAT: Configuration [0-7]: WB WT UC- UC WC WP UC UC [ 0.000980] Kernel/User page tables isolation: disabled on XEN PV. [ 0.026666] RAMDISK: [mem 0x04000000-0x053a4fff] [ 0.026675] ACPI: Early table checksum verification disabled [ 0.027276] ACPI: RSDP 0x00000000000F0580 000024 (v02 SUPERM) [ 0.027288] ACPI: XSDT 0x00000000799FF0A0 0000BC (v01 SUPERM SMCI--MB 01072009 AMI 00010013) [ 0.027325] ACPI: FACP 0x0000000079A17AC8 00010C (v05 SUPERM SMCI--MB 01072009 AMI 00010013) [ 0.027373] ACPI: DSDT 0x00000000799FF1F0 0188D5 (v02 SUPERM SMCI--MB 01072009 INTL 20091013) [ 0.027389] ACPI: FACS 0x0000000079E59F80 000040 [ 0.027405] ACPI: APIC 0x0000000079A17BD8 0000BC (v03 SUPERM SMCI--MB 01072009 AMI 00010013) [ 0.027421] ACPI: FPDT 0x0000000079A17C98 000044 (v01 SUPERM SMCI--MB 01072009 AMI 00010013) [ 0.027437] ACPI: FIDT 0x0000000079A17CE0 00009C (v01 SUPERM SMCI--MB 01072009 AMI 00010013) [ 0.027453] ACPI: SPMI 0x0000000079A17D80 000040 (v05 SUPERM SMCI--MB 00000000 AMI. 00000000) [ 0.027469] ACPI: MCFG 0x0000000079A17DC0 00003C (v01 SUPERM SMCI--MB 01072009 MSFT 00000097) [ 0.027485] ACPI: UEFI 0x0000000079A17E00 000042 (v01 00000000 00000000) [ 0.027501] ACPI: DBG2 0x0000000079A17E48 000072 (v00 SUPERM SMCI--MB 00000000 INTL 20091013) [ 0.027517] ACPI: HPET 0x0000000079A17EC0 000038 (v01 SUPERM SMCI--MB 00000001 INTL 20091013) [ 0.027533] ACPI: WDDT 0x0000000079A17EF8 000040 (v01 SUPERM SMCI--MB 00000000 INTL 20091013) [ 0.027549] ACPI: SSDT 0x0000000079A17F38 00ED8B (v01 AMI PmMgt 00000001 INTL 20120913) [ 0.027565] ACPI: SSDT 0x0000000079A26CC8 002285 (v02 SUPERM SpsNm 00000002 INTL 20120913) [ 0.027581] ACPI: SSDT 0x0000000079A28F50 000064 (v02 SUPERM SpsNvs 00000002 INTL 20120913) [ 0.027597] ACPI: PRAD 0x0000000079A28FB8 000102 (v02 SUPERM SMCI--MB 00000002 INTL 20120913) [ 0.027613] ACPI: RMAD 0x0000000079A290C0 0000CC (v01 SUPERM SMCI--MB 00000001 INTL 20091013) [ 0.027629] ACPI: HEST 0x0000000079A29190 0000A8 (v01 SUPERM SMCI--MB 00000001 INTL 00000001) [ 0.027645] ACPI: BERT 0x0000000079A29238 000030 (v01 SUPERM SMCI--MB 00000001 INTL 00000001) [ 0.027661] ACPI: ERST 0x0000000079A29268 000230 (v01 SUPERM SMCI--MB 00000001 INTL 00000001) [ 0.027677] ACPI: EINJ 0x0000000079A29498 000130 (v01 SUPERM SMCI--MB 00000001 INTL 00000001) [ 0.027685] ACPI: Reserving FACP table memory at [mem 0x79a17ac8-0x79a17bd3] [ 0.027687] ACPI: Reserving DSDT table memory at [mem 0x799ff1f0-0x79a17ac4] [ 0.027688] ACPI: Reserving FACS table memory at [mem 0x79e59f80-0x79e59fbf] [ 0.027689] ACPI: Reserving APIC table memory at [mem 0x79a17bd8-0x79a17c93] [ 0.027690] ACPI: Reserving FPDT table memory at [mem 0x79a17c98-0x79a17cdb] [ 0.027691] ACPI: Reserving FIDT table memory at [mem 0x79a17ce0-0x79a17d7b] [ 0.027692] ACPI: Reserving SPMI table memory at [mem 0x79a17d80-0x79a17dbf] [ 0.027693] ACPI: Reserving MCFG table memory at [mem 0x79a17dc0-0x79a17dfb] [ 0.027694] ACPI: Reserving UEFI table memory at [mem 0x79a17e00-0x79a17e41] [ 0.027695] ACPI: Reserving DBG2 table memory at [mem 0x79a17e48-0x79a17eb9] [ 0.027695] ACPI: Reserving HPET table memory at [mem 0x79a17ec0-0x79a17ef7] [ 0.027696] ACPI: Reserving WDDT table memory at [mem 0x79a17ef8-0x79a17f37] [ 0.027697] ACPI: Reserving SSDT table memory at [mem 0x79a17f38-0x79a26cc2] [ 0.027698] ACPI: Reserving SSDT table memory at [mem 0x79a26cc8-0x79a28f4c] [ 0.027699] ACPI: Reserving SSDT table memory at [mem 0x79a28f50-0x79a28fb3] [ 0.027700] ACPI: Reserving PRAD table memory at [mem 0x79a28fb8-0x79a290b9] [ 0.027701] ACPI: Reserving RMAD table memory at [mem 0x79a290c0-0x79a2918b] [ 0.027702] ACPI: Reserving HEST table memory at [mem 0x79a29190-0x79a29237] [ 0.027703] ACPI: Reserving BERT table memory at [mem 0x79a29238-0x79a29267] [ 0.027704] ACPI: Reserving ERST table memory at [mem 0x79a29268-0x79a29497] [ 0.027705] ACPI: Reserving EINJ table memory at [mem 0x79a29498-0x79a295c7] [ 0.027812] APIC: Switched APIC routing to: Xen PV [ 0.031897] Zone ranges: [ 0.031899] DMA [mem 0x0000000000001000-0x0000000000ffffff] [ 0.031901] DMA32 [mem 0x0000000001000000-0x0000000020065fff] [ 0.031903] Normal empty [ 0.031905] Movable zone start for each node [ 0.031905] Early memory node ranges [ 0.031906] node 0: [mem 0x0000000000001000-0x0000000000099fff] [ 0.031908] node 0: [mem 0x0000000000100000-0x0000000020065fff] [ 0.031910] Initmem setup node 0 [mem 0x0000000000001000-0x0000000020065fff] [ 0.031915] On node 0, zone DMA: 1 pages in unavailable ranges [ 0.031954] On node 0, zone DMA: 102 pages in unavailable ranges [ 0.033443] On node 0, zone DMA32: 32666 pages in unavailable ranges [ 0.033448] p2m virtual area at (____ptrval____), size is 40000000 [ 0.160056] Remapped 102 page(s) [ 0.161437] ACPI: PM-Timer IO Port: 0x408 [ 0.161506] ACPI: LAPIC_NMI (acpi_id[0x00] high level lint[0x1]) [ 0.161509] ACPI: LAPIC_NMI (acpi_id[0x02] high level lint[0x1]) [ 0.161511] ACPI: LAPIC_NMI (acpi_id[0x04] high level lint[0x1]) [ 0.161512] ACPI: LAPIC_NMI (acpi_id[0x06] high level lint[0x1]) [ 0.161514] ACPI: LAPIC_NMI (acpi_id[0x01] high level lint[0x1]) [ 0.161515] ACPI: LAPIC_NMI (acpi_id[0x03] high level lint[0x1]) [ 0.161517] ACPI: LAPIC_NMI (acpi_id[0x05] high level lint[0x1]) [ 0.161519] ACPI: LAPIC_NMI (acpi_id[0x07] high level lint[0x1]) [ 0.161547] IOAPIC[0]: apic_id 8, version 32, address 0xfec00000, GSI 0-23 [ 0.161561] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl) [ 0.161564] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level) [ 0.161592] ACPI: Using ACPI (MADT) for SMP configuration information [ 0.161597] ACPI: HPET id: 0x8086a701 base: 0xfed00000 [ 0.161609] CPU topo: Max. logical packages: 1 [ 0.161610] CPU topo: Max. logical dies: 1 [ 0.161611] CPU topo: Max. dies per package: 1 [ 0.161617] CPU topo: Max. threads per core: 2 [ 0.161619] CPU topo: Num. cores per package: 4 [ 0.161619] CPU topo: Num. threads per package: 8 [ 0.161620] CPU topo: Allowing 8 present CPUs plus 0 hotplug CPUs [ 0.161634] PM: hibernation: Registered nosave memory: [mem 0x00000000-0x00000fff] [ 0.161636] PM: hibernation: Registered nosave memory: [mem 0x0009a000-0x0009afff] [ 0.161637] PM: hibernation: Registered nosave memory: [mem 0x0009b000-0x000fffff] [ 0.161639] [mem 0x90000000-0xfbffbfff] available for PCI devices [ 0.161644] Booting kernel on Xen [ 0.161644] Xen version: 4.19-unstable (preserve-AD) [ 0.161647] clocksource: refined-jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 1910969940391419 ns [ 0.168708] setup_percpu: NR_CPUS:64 nr_cpumask_bits:8 nr_cpu_ids:8 nr_node_ids:1 [ 0.169180] percpu: Embedded 57 pages/cpu s194408 r8192 d30872 u262144 [ 0.169187] pcpu-alloc: s194408 r8192 d30872 u262144 alloc=1*2097152 [ 0.169190] pcpu-alloc: [0] 0 1 2 3 4 5 6 7 [ 0.169261] xen: PV spinlocks enabled [ 0.169264] PV qspinlock hash table entries: 256 (order: 0, 4096 bytes, linear) [ 0.169267] Kernel command line: placeholder root=/dev/mapper/debina1--vg-root ro console=hvc0 [ 0.169306] Unknown kernel command line parameters "placeholder", will be passed to user space. [ 0.169318] random: crng init done [ 0.169393] Dentry cache hash table entries: 65536 (order: 7, 524288 bytes, linear) [ 0.169433] Inode-cache hash table entries: 32768 (order: 6, 262144 bytes, linear) [ 0.170750] Built 1 zonelists, mobility grouping on. Total pages: 131071 [ 0.170753] mem auto-init: stack:all(zero), heap alloc:off, heap free:off [ 0.170756] software IO TLB: area num 8. [ 0.237453] Memory: 385608K/524284K available (16384K kernel code, 2753K rwdata, 6164K rodata, 2680K init, 1864K bss, 138424K reserved, 0K cma-reserved) [ 0.237616] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=8, Nodes=1 [ 0.240224] Dynamic Preempt: voluntary [ 0.240474] rcu: Preemptible hierarchical RCU implementation. [ 0.240475] rcu: RCU event tracing is enabled. [ 0.240476] rcu: RCU restricting CPUs from NR_CPUS=64 to nr_cpu_ids=8. [ 0.240478] Trampoline variant of Tasks RCU enabled. [ 0.240478] rcu: RCU calculated value of scheduler-enlistment delay is 100 jiffies. [ 0.240480] rcu: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=8 [ 0.240514] RCU Tasks: Setting shift to 3 and lim to 1 rcu_task_cb_adjust=1. [ 0.252201] NR_IRQS: 4352, nr_irqs: 488, preallocated irqs: 16 [ 0.252359] xen:events: Using FIFO-based ABI [ 0.252382] xen: --> pirq=1 -> irq=1 (gsi=1) [ 0.252391] xen: --> pirq=2 -> irq=2 (gsi=2) [ 0.252398] xen: --> pirq=3 -> irq=3 (gsi=3) [ 0.252406] xen: --> pirq=4 -> irq=4 (gsi=4) [ 0.252413] xen: --> pirq=5 -> irq=5 (gsi=5) [ 0.252421] xen: --> pirq=6 -> irq=6 (gsi=6) [ 0.252428] xen: --> pirq=7 -> irq=7 (gsi=7) [ 0.252435] xen: --> pirq=8 -> irq=8 (gsi=8) [ 0.252443] xen: --> pirq=9 -> irq=9 (gsi=9) [ 0.252450] xen: --> pirq=10 -> irq=10 (gsi=10) [ 0.252458] xen: --> pirq=11 -> irq=11 (gsi=11) [ 0.252466] xen: --> pirq=12 -> irq=12 (gsi=12) [ 0.252473] xen: --> pirq=13 -> irq=13 (gsi=13) [ 0.252481] xen: --> pirq=14 -> irq=14 (gsi=14) [ 0.252488] xen: --> pirq=15 -> irq=15 (gsi=15) [ 0.252498] rcu: srcu_init: Setting srcu_struct sizes based on contention. [ 0.257854] Console: colour VGA+ 80x25 [ 0.257857] printk: legacy console [tty0] enabled [ 0.273987] printk: legacy console [hvc0] enabled [ 0.275368] ACPI: Core revision 20240322 [ 0.289403] clocksource: xen: mask: 0xffffffffffffffff max_cycles: 0x1cd42e4dffb, max_idle_ns: 881590591483 ns [ 0.289564] Xen: using vcpuop timer interface [ 0.289569] installing Xen timer for CPU 0 [ 0.289719] clocksource: tsc-early: mask: 0xffffffffffffffff max_cycles: 0x1fb62f12e8c, max_idle_ns: 440795238402 ns [ 0.289876] Calibrating delay loop (skipped), value calculated using timer frequency.. 4399.99 BogoMIPS (lpj=2199996) [ 0.290201] Last level iTLB entries: 4KB 64, 2MB 8, 4MB 8 [ 0.290318] Last level dTLB entries: 4KB 64, 2MB 0, 4MB 0, 1GB 4 [ 0.290444] Spectre V1 : Mitigation: usercopy/swapgs barriers and __user pointer sanitization [ 0.290592] Spectre V2 : Mitigation: Retpolines [ 0.290705] Spectre V2 : Spectre v2 / SpectreRSB mitigation: Filling RSB on context switch [ 0.291031] Spectre V2 : Spectre v2 / SpectreRSB : Filling RSB on VMEXIT [ 0.291149] Spectre V2 : Enabling Restricted Speculation for firmware calls [ 0.291270] Spectre V2 : mitigation: Enabling conditional Indirect Branch Prediction Barrier [ 0.291416] Spectre V2 : User space: Mitigation: STIBP via prctl [ 0.291534] Speculative Store Bypass: Mitigation: Speculative Store Bypass disabled via prctl [ 0.291884] MDS: Mitigation: Clear CPU buffers [ 0.291996] TAA: Mitigation: Clear CPU buffers [ 0.292109] MMIO Stale Data: Vulnerable: Clear CPU buffers attempted, no microcode [ 0.292272] x86/fpu: Supporting XSAVE feature 0x001: 'x87 floating point registers' [ 0.292416] x86/fpu: Supporting XSAVE feature 0x002: 'SSE registers' [ 0.292534] x86/fpu: Supporting XSAVE feature 0x004: 'AVX registers' [ 0.292653] x86/fpu: xstate_offset[2]: 576, xstate_sizes[2]: 256 [ 0.292771] x86/fpu: Enabled xstate features 0x7, context size is 832 bytes, using 'standard' format. [ 0.315628] Freeing SMP alternatives memory: 40K [ 0.315758] pid_max: default: 32768 minimum: 301 [ 0.315897] LSM: initializing lsm=capability,selinux [ 0.316017] SELinux: Initializing. [ 0.316152] Mount-cache hash table entries: 1024 (order: 1, 8192 bytes, linear) [ 0.316303] Mountpoint-cache hash table entries: 1024 (order: 1, 8192 bytes, linear) [ 0.316963] cpu 0 spinlock event irq 25 [ 0.317080] VPMU disabled by hypervisor. [ 0.317652] Performance Events: unsupported p6 CPU model 86 no PMU driver, software events only. [ 0.317805] signal: max sigframe size: 1776 [ 0.317950] rcu: Hierarchical SRCU implementation. [ 0.318065] rcu: Max phase no-delay instances is 400. [ 0.318678] smp: Bringing up secondary CPUs ... [ 0.319031] installing Xen timer for CPU 1 [ 0.319551] installing Xen timer for CPU 2 [ 0.320094] installing Xen timer for CPU 3 [ 0.038373] [Firmware Bug]: CPU 1: APIC ID mismatch. Firmware: 0x0002 APIC: 0x0001 [ 0.320360] cpu 1 spinlock event irq 45 [ 0.321036] MDS CPU bug present and SMT on, data leak possible. See https://www.kernel.org/doc/html/latest/admin-guide/hw-vuln/mds.html for more details. [ 0.321882] TAA CPU bug present and SMT on, data leak possible. See https://www.kernel.org/doc/html/latest/admin-guide/hw-vuln/tsx_async_abort.html for more details. [ 0.322069] MMIO Stale Data CPU bug present and SMT on, data leak possible. See https://www.kernel.org/doc/html/latest/admin-guide/hw-vuln/processor_mmio_stale_data.html for more details. [ 0.038373] [Firmware Bug]: CPU 2: APIC ID mismatch. Firmware: 0x0004 APIC: 0x0002 [ 0.322276] cpu 2 spinlock event irq 46 [ 0.038373] [Firmware Bug]: CPU 3: APIC ID mismatch. Firmware: 0x0006 APIC: 0x0003 [ 0.322915] cpu 3 spinlock event irq 47 [ 0.323175] installing Xen timer for CPU 4 [ 0.324197] installing Xen timer for CPU 5 [ 0.324684] installing Xen timer for CPU 6 [ 0.325108] installing Xen timer for CPU 7 [ 0.038373] [Firmware Bug]: CPU 4: APIC ID mismatch. Firmware: 0x0001 APIC: 0x0004 [ 0.333943] cpu 4 spinlock event irq 68 [ 0.038373] [Firmware Bug]: CPU 5: APIC ID mismatch. Firmware: 0x0003 APIC: 0x0005 [ 0.334236] cpu 5 spinlock event irq 69 [ 0.038373] [Firmware Bug]: CPU 6: APIC ID mismatch. Firmware: 0x0005 APIC: 0x0006 [ 0.334937] cpu 6 spinlock event irq 70 [ 0.335921] cpu 7 spinlock event irq 71 [ 0.336071] smp: Brought up 1 node, 8 CPUs [ 0.336308] devtmpfs: initialized [ 0.336308] x86/mm: Memory block size: 128MB [ 0.337299] ACPI: PM: Registering ACPI NVS region [mem 0x799b7000-0x79e5afff] (4866048 bytes) [ 0.337299] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 1911260446275000 ns [ 0.337299] futex hash table entries: 2048 (order: 5, 131072 bytes, linear) [ 0.338013] PM: RTC time: 03:06:48, date: 2024-06-25 [ 0.338246] NET: Registered PF_NETLINK/PF_ROUTE protocol family [ 0.338388] xen:grant_table: Grant tables using version 1 layout [ 0.338531] Grant table initialized [ 0.338871] audit: initializing netlink subsys (disabled) [ 0.339023] audit: type=2000 audit(1719284809.043:1): state=initialized audit_enabled=0 res=1 [ 0.339045] thermal_sys: Registered thermal governor 'step_wise' [ 0.339045] thermal_sys: Registered thermal governor 'user_space' [ 0.339093] ACPI FADT declares the system doesn't support PCIe ASPM, so disable it [ 0.340044] PCI: ECAM [mem 0x80000000-0x8fffffff] (base 0x80000000) for domain 0000 [bus 00-ff] [ 0.473866] PCI: Using configuration type 1 for base access [ 0.474057] kprobes: kprobe jump-optimization is enabled. All kprobes are optimized if possible. [ 0.474091] ACPI: Added _OSI(Module Device) [ 0.474884] ACPI: Added _OSI(Processor Device) [ 0.474998] ACPI: Added _OSI(3.0 _SCP Extensions) [ 0.475111] ACPI: Added _OSI(Processor Aggregator Device) [ 0.504756] ACPI: 4 ACPI AML tables successfully acquired and loaded [ 0.506871] xen: registering gsi 9 triggering 0 polarity 0 [ 0.510155] ACPI: Dynamic OEM Table Load: [ 0.513239] ACPI: _OSC evaluated successfully for all CPUs [ 0.513560] ACPI: Interpreter enabled [ 0.513685] ACPI: PM: (supports S0 S4 S5) [ 0.513796] ACPI: Using IOAPIC for interrupt routing [ 0.513911] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug [ 0.514060] PCI: Using E820 reservations for host bridge windows [ 0.514631] ACPI: Enabled 6 GPEs in block 00 to 3F [ 0.540211] ACPI: PCI Root Bridge [UNC0] (domain 0000 [bus ff]) [ 0.540340] acpi PNP0A03:03: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI HPX-Type3] [ 0.540581] acpi PNP0A03:03: _OSC: platform does not support [LTR] [ 0.540836] acpi PNP0A03:03: _OSC: OS now controls [PME PCIeCapability] [ 0.540880] acpi PNP0A03:03: FADT indicates ASPM is unsupported, using BIOS configuration [ 0.541057] PCI host bridge to bus 0000:ff [ 0.541169] pci_bus 0000:ff: root bus resource [bus ff] [ 0.541368] pci 0000:ff:0b.0: [8086:6f81] type 00 class 0x088000 conventional PCI endpoint [ 0.541861] pci 0000:ff:0b.1: [8086:6f36] type 00 class 0x110100 conventional PCI endpoint [ 0.542193] pci 0000:ff:0b.2: [8086:6f37] type 00 class 0x110100 conventional PCI endpoint [ 0.542653] pci 0000:ff:0b.3: [8086:6f76] type 00 class 0x088000 conventional PCI endpoint [ 0.543139] pci 0000:ff:0c.0: [8086:6fe0] type 00 class 0x088000 conventional PCI endpoint [ 0.543593] pci 0000:ff:0c.1: [8086:6fe1] type 00 class 0x088000 conventional PCI endpoint [ 0.544058] pci 0000:ff:0c.2: [8086:6fe2] type 00 class 0x088000 conventional PCI endpoint [ 0.544512] pci 0000:ff:0c.3: [8086:6fe3] type 00 class 0x088000 conventional PCI endpoint [ 0.545008] pci 0000:ff:0f.0: [8086:6ff8] type 00 class 0x088000 conventional PCI endpoint [ 0.545484] pci 0000:ff:0f.4: [8086:6ffc] type 00 class 0x088000 conventional PCI endpoint [ 0.545956] pci 0000:ff:0f.5: [8086:6ffd] type 00 class 0x088000 conventional PCI endpoint [ 0.546411] pci 0000:ff:0f.6: [8086:6ffe] type 00 class 0x088000 conventional PCI endpoint [ 0.546884] pci 0000:ff:10.0: [8086:6f1d] type 00 class 0x088000 conventional PCI endpoint [ 0.547341] pci 0000:ff:10.1: [8086:6f34] type 00 class 0x110100 conventional PCI endpoint [ 0.547822] pci 0000:ff:10.5: [8086:6f1e] type 00 class 0x088000 conventional PCI endpoint [ 0.548188] pci 0000:ff:10.6: [8086:6f7d] type 00 class 0x110100 conventional PCI endpoint [ 0.548655] pci 0000:ff:10.7: [8086:6f1f] type 00 class 0x088000 conventional PCI endpoint [ 0.549116] pci 0000:ff:12.0: [8086:6fa0] type 00 class 0x088000 conventional PCI endpoint [ 0.549409] pci 0000:ff:12.1: [8086:6f30] type 00 class 0x110100 conventional PCI endpoint [ 0.549916] pci 0000:ff:13.0: [8086:6fa8] type 00 class 0x088000 conventional PCI endpoint [ 0.550431] pci 0000:ff:13.1: [8086:6f71] type 00 class 0x088000 conventional PCI endpoint [ 0.550946] pci 0000:ff:13.2: [8086:6faa] type 00 class 0x088000 conventional PCI endpoint [ 0.551446] pci 0000:ff:13.3: [8086:6fab] type 00 class 0x088000 conventional PCI endpoint [ 0.551960] pci 0000:ff:13.4: [8086:6fac] type 00 class 0x088000 conventional PCI endpoint [ 0.552463] pci 0000:ff:13.5: [8086:6fad] type 00 class 0x088000 conventional PCI endpoint [ 0.552970] pci 0000:ff:13.6: [8086:6fae] type 00 class 0x088000 conventional PCI endpoint [ 0.553427] pci 0000:ff:13.7: [8086:6faf] type 00 class 0x088000 conventional PCI endpoint [ 0.553907] pci 0000:ff:14.0: [8086:6fb0] type 00 class 0x088000 conventional PCI endpoint [ 0.554408] pci 0000:ff:14.1: [8086:6fb1] type 00 class 0x088000 conventional PCI endpoint [ 0.554917] pci 0000:ff:14.2: [8086:6fb2] type 00 class 0x088000 conventional PCI endpoint [ 0.555417] pci 0000:ff:14.3: [8086:6fb3] type 00 class 0x088000 conventional PCI endpoint [ 0.555928] pci 0000:ff:14.4: [8086:6fbc] type 00 class 0x088000 conventional PCI endpoint [ 0.556388] pci 0000:ff:14.5: [8086:6fbd] type 00 class 0x088000 conventional PCI endpoint [ 0.556858] pci 0000:ff:14.6: [8086:6fbe] type 00 class 0x088000 conventional PCI endpoint [ 0.557191] pci 0000:ff:14.7: [8086:6fbf] type 00 class 0x088000 conventional PCI endpoint [ 0.557668] pci 0000:ff:15.0: [8086:6fb4] type 00 class 0x088000 conventional PCI endpoint [ 0.558235] pci 0000:ff:15.1: [8086:6fb5] type 00 class 0x088000 conventional PCI endpoint [ 0.558743] pci 0000:ff:15.2: [8086:6fb6] type 00 class 0x088000 conventional PCI endpoint [ 0.559233] pci 0000:ff:15.3: [8086:6fb7] type 00 class 0x088000 conventional PCI endpoint [ 0.559794] pci 0000:ff:1e.0: [8086:6f98] type 00 class 0x088000 conventional PCI endpoint [ 0.560189] pci 0000:ff:1e.1: [8086:6f99] type 00 class 0x088000 conventional PCI endpoint [ 0.560658] pci 0000:ff:1e.2: [8086:6f9a] type 00 class 0x088000 conventional PCI endpoint [ 0.561123] pci 0000:ff:1e.3: [8086:6fc0] type 00 class 0x088000 conventional PCI endpoint [ 0.561404] pci 0000:ff:1e.4: [8086:6f9c] type 00 class 0x088000 conventional PCI endpoint [ 0.561890] pci 0000:ff:1f.0: [8086:6f88] type 00 class 0x088000 conventional PCI endpoint [ 0.562354] pci 0000:ff:1f.2: [8086:6f8a] type 00 class 0x088000 conventional PCI endpoint [ 0.562819] pci_bus 0000:ff: on NUMA node 0 [ 0.567135] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-fe]) [ 0.567269] acpi PNP0A08:00: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI HPX-Type3] [ 0.567554] acpi PNP0A08:00: _OSC: platform does not support [PME LTR] [ 0.567894] acpi PNP0A08:00: _OSC: OS now controls [PCIeCapability] [ 0.568014] acpi PNP0A08:00: FADT indicates ASPM is unsupported, using BIOS configuration [ 0.568522] PCI host bridge to bus 0000:00 [ 0.568638] pci_bus 0000:00: root bus resource [io 0x0000-0x0cf7 window] [ 0.568786] pci_bus 0000:00: root bus resource [io 0x1000-0xffff window] [ 0.568879] pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff window] [ 0.569023] pci_bus 0000:00: root bus resource [mem 0x90000000-0xfbffbfff window] [ 0.569167] pci_bus 0000:00: root bus resource [bus 00-fe] [ 0.569351] pci 0000:00:00.0: [8086:6f00] type 00 class 0x060000 PCIe Root Port [ 0.570047] pci 0000:00:01.0: [8086:6f02] type 01 class 0x060400 PCIe Root Port [ 0.570347] pci 0000:00:01.0: PCI bridge to [bus 01] [ 0.570773] pci 0000:00:01.0: PME# supported from D0 D3hot D3cold [ 0.571142] pci 0000:00:01.1: [8086:6f03] type 01 class 0x060400 PCIe Root Port [ 0.571453] pci 0000:00:01.1: PCI bridge to [bus 02] [ 0.571868] pci 0000:00:01.1: PME# supported from D0 D3hot D3cold [ 0.572273] pci 0000:00:02.0: [8086:6f04] type 01 class 0x060400 PCIe Root Port [ 0.572584] pci 0000:00:02.0: PCI bridge to [bus 03] [ 0.572724] pci 0000:00:02.0: bridge window [mem 0xfb500000-0xfb5fffff] [ 0.573117] pci 0000:00:02.0: PME# supported from D0 D3hot D3cold [ 0.573499] pci 0000:00:02.2: [8086:6f06] type 01 class 0x060400 PCIe Root Port [ 0.573798] pci 0000:00:02.2: PCI bridge to [bus 04] [ 0.573902] pci 0000:00:02.2: bridge window [mem 0xfb400000-0xfb4fffff] [ 0.574066] pci 0000:00:02.2: bridge window [mem 0xfba00000-0xfbefffff 64bit pref] [ 0.574458] pci 0000:00:02.2: PME# supported from D0 D3hot D3cold [ 0.574850] pci 0000:00:03.0: [8086:6f08] type 01 class 0x060400 PCIe Root Port [ 0.575033] pci 0000:00:03.0: PCI bridge to [bus 05] [ 0.575463] pci 0000:00:03.0: PME# supported from D0 D3hot D3cold [ 0.575845] pci 0000:00:03.2: [8086:6f0a] type 01 class 0x060400 PCIe Root Port [ 0.576033] pci 0000:00:03.2: PCI bridge to [bus 06] [ 0.576458] pci 0000:00:03.2: PME# supported from D0 D3hot D3cold [ 0.576847] pci 0000:00:05.0: [8086:6f28] type 00 class 0x088000 PCIe Root Complex Integrated Endpoint [ 0.577356] pci 0000:00:05.1: [8086:6f29] type 00 class 0x088000 PCIe Root Complex Integrated Endpoint [ 0.577996] pci 0000:00:05.2: [8086:6f2a] type 00 class 0x088000 PCIe Root Complex Integrated Endpoint [ 0.578715] pci 0000:00:14.0: [8086:8c31] type 00 class 0x0c0330 conventional PCI endpoint [ 0.578960] pci 0000:00:14.0: BAR 0 [mem 0xfb600000-0xfb60ffff 64bit] [ 0.579430] pci 0000:00:14.0: PME# supported from D3hot D3cold [ 0.579781] pci 0000:00:16.0: [8086:8c3a] type 00 class 0x078000 conventional PCI endpoint [ 0.579989] pci 0000:00:16.0: BAR 0 [mem 0xfb617000-0xfb61700f 64bit] [ 0.580453] pci 0000:00:16.0: PME# supported from D0 D3hot D3cold [ 0.580794] pci 0000:00:16.1: [8086:8c3b] type 00 class 0x078000 conventional PCI endpoint [ 0.580988] pci 0000:00:16.1: BAR 0 [mem 0xfb616000-0xfb61600f 64bit] [ 0.581451] pci 0000:00:16.1: PME# supported from D0 D3hot D3cold [ 0.581816] pci 0000:00:1a.0: [8086:8c2d] type 00 class 0x0c0320 conventional PCI endpoint [ 0.581957] pci 0000:00:1a.0: BAR 0 [mem 0xfb614000-0xfb6143ff] [ 0.582492] pci 0000:00:1a.0: PME# supported from D0 D3hot D3cold [ 0.582821] pci 0000:00:1c.0: [8086:8c10] type 01 class 0x060400 PCIe Root Port [ 0.583045] pci 0000:00:1c.0: PCI bridge to [bus 07] [ 0.583175] pci 0000:00:1c.0: bridge window [io 0xe000-0xefff] [ 0.583303] pci 0000:00:1c.0: bridge window [mem 0xfb300000-0xfb3fffff] [ 0.583722] pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold [ 0.583934] pci 0000:00:1c.0: Enabling MPC IRBNCE [ 0.584057] pci 0000:00:1c.0: Intel PCH root port ACS workaround enabled [ 0.584365] pci 0000:00:1c.1: [8086:8c12] type 01 class 0x060400 PCIe Root Port [ 0.584671] pci 0000:00:1c.1: PCI bridge to [bus 08] [ 0.584809] pci 0000:00:1c.1: bridge window [io 0xd000-0xdfff] [ 0.584889] pci 0000:00:1c.1: bridge window [mem 0xfb200000-0xfb2fffff] [ 0.585314] pci 0000:00:1c.1: PME# supported from D0 D3hot D3cold [ 0.585510] pci 0000:00:1c.1: Enabling MPC IRBNCE [ 0.585631] pci 0000:00:1c.1: Intel PCH root port ACS workaround enabled [ 0.585950] pci 0000:00:1c.3: [8086:8c16] type 01 class 0x060400 PCIe Root Port [ 0.586257] pci 0000:00:1c.3: PCI bridge to [bus 09-0a] [ 0.586387] pci 0000:00:1c.3: bridge window [io 0xc000-0xcfff] [ 0.586515] pci 0000:00:1c.3: bridge window [mem 0xfa000000-0xfb0fffff] [ 0.586948] pci 0000:00:1c.3: PME# supported from D0 D3hot D3cold [ 0.587153] pci 0000:00:1c.3: Enabling MPC IRBNCE [ 0.587274] pci 0000:00:1c.3: Intel PCH root port ACS workaround enabled [ 0.587583] pci 0000:00:1c.4: [8086:8c18] type 01 class 0x060400 PCIe Root Port [ 0.587902] pci 0000:00:1c.4: PCI bridge to [bus 0b] [ 0.588032] pci 0000:00:1c.4: bridge window [io 0xb000-0xbfff] [ 0.588159] pci 0000:00:1c.4: bridge window [mem 0xfb100000-0xfb1fffff] [ 0.588585] pci 0000:00:1c.4: PME# supported from D0 D3hot D3cold [ 0.588790] pci 0000:00:1c.4: Enabling MPC IRBNCE [ 0.588887] pci 0000:00:1c.4: Intel PCH root port ACS workaround enabled [ 0.589221] pci 0000:00:1d.0: [8086:8c26] type 00 class 0x0c0320 conventional PCI endpoint [ 0.589446] pci 0000:00:1d.0: BAR 0 [mem 0xfb613000-0xfb6133ff] [ 0.590001] pci 0000:00:1d.0: PME# supported from D0 D3hot D3cold [ 0.590334] pci 0000:00:1f.0: [8086:8c54] type 00 class 0x060100 conventional PCI endpoint [ 0.591141] pci 0000:00:1f.2: [8086:8c02] type 00 class 0x010601 conventional PCI endpoint [ 0.591369] pci 0000:00:1f.2: BAR 0 [io 0xf070-0xf077] [ 0.591525] pci 0000:00:1f.2: BAR 1 [io 0xf060-0xf063] [ 0.591683] pci 0000:00:1f.2: BAR 2 [io 0xf050-0xf057] [ 0.591849] pci 0000:00:1f.2: BAR 3 [io 0xf040-0xf043] [ 0.591920] pci 0000:00:1f.2: BAR 4 [io 0xf020-0xf03f] [ 0.592076] pci 0000:00:1f.2: BAR 5 [mem 0xfb612000-0xfb6127ff] [ 0.592388] pci 0000:00:1f.2: PME# supported from D3hot [ 0.592698] pci 0000:00:1f.3: [8086:8c22] type 00 class 0x0c0500 conventional PCI endpoint [ 0.592944] pci 0000:00:1f.3: BAR 0 [mem 0xfb611000-0xfb6110ff 64bit] [ 0.593187] pci 0000:00:1f.3: BAR 4 [io 0xf000-0xf01f] [ 0.593572] pci 0000:00:1f.6: [8086:8c24] type 00 class 0x118000 conventional PCI endpoint [ 0.593832] pci 0000:00:1f.6: BAR 0 [mem 0xfb610000-0xfb610fff 64bit] [ 0.594481] pci 0000:00:01.0: PCI bridge to [bus 01] [ 0.594791] pci 0000:00:01.1: PCI bridge to [bus 02] [ 0.595111] pci 0000:03:00.0: [8086:6f50] type 00 class 0x088000 PCIe Endpoint [ 0.595349] pci 0000:03:00.0: BAR 0 [mem 0xfb506000-0xfb507fff 64bit] [ 0.596132] pci 0000:03:00.1: [8086:6f51] type 00 class 0x088000 PCIe Endpoint [ 0.596371] pci 0000:03:00.1: BAR 0 [mem 0xfb504000-0xfb505fff 64bit] [ 0.597123] pci 0000:03:00.2: [8086:6f52] type 00 class 0x088000 PCIe Endpoint [ 0.597361] pci 0000:03:00.2: BAR 0 [mem 0xfb502000-0xfb503fff 64bit] [ 0.598095] pci 0000:03:00.3: [8086:6f53] type 00 class 0x088000 PCIe Endpoint [ 0.598334] pci 0000:03:00.3: BAR 0 [mem 0xfb500000-0xfb501fff 64bit] [ 0.599058] pci 0000:00:02.0: PCI bridge to [bus 03] [ 0.599430] pci 0000:04:00.0: [8086:15ac] type 00 class 0x020000 PCIe Endpoint [ 0.599677] pci 0000:04:00.0: BAR 0 [mem 0xfbc00000-0xfbdfffff 64bit pref] [ 0.599940] pci 0000:04:00.0: BAR 4 [mem 0xfbe04000-0xfbe07fff 64bit pref] [ 0.600100] pci 0000:04:00.0: ROM [mem 0xfb480000-0xfb4fffff pref] [ 0.600452] pci 0000:04:00.0: PME# supported from D0 D3hot D3cold [ 0.600687] pci 0000:04:00.0: VF BAR 0 [mem 0x00000000-0x00003fff 64bit] [ 0.600808] pci 0000:04:00.0: VF BAR 0 [mem 0x00000000-0x000fffff 64bit]: contains BAR 0 for 64 VFs [ 0.600930] pci 0000:04:00.0: VF BAR 3 [mem 0x00000000-0x00003fff 64bit] [ 0.601050] pci 0000:04:00.0: VF BAR 3 [mem 0x00000000-0x000fffff 64bit]: contains BAR 3 for 64 VFs [ 0.601642] pci 0000:04:00.1: [8086:15ac] type 00 class 0x020000 PCIe Endpoint [ 0.601879] pci 0000:04:00.1: BAR 0 [mem 0xfba00000-0xfbbfffff 64bit pref] [ 0.602153] pci 0000:04:00.1: BAR 4 [mem 0xfbe00000-0xfbe03fff 64bit pref] [ 0.602313] pci 0000:04:00.1: ROM [mem 0xfb400000-0xfb47ffff pref] [ 0.602674] pci 0000:04:00.1: PME# supported from D0 D3hot D3cold [ 0.602879] pci 0000:04:00.1: VF BAR 0 [mem 0x00000000-0x00003fff 64bit] [ 0.602999] pci 0000:04:00.1: VF BAR 0 [mem 0x00000000-0x000fffff 64bit]: contains BAR 0 for 64 VFs [ 0.603199] pci 0000:04:00.1: VF BAR 3 [mem 0x00000000-0x00003fff 64bit] [ 0.603324] pci 0000:04:00.1: VF BAR 3 [mem 0x00000000-0x000fffff 64bit]: contains BAR 3 for 64 VFs [ 0.604295] pci 0000:00:02.2: PCI bridge to [bus 04] [ 0.604600] pci 0000:00:03.0: PCI bridge to [bus 05] [ 0.604904] pci 0000:00:03.2: PCI bridge to [bus 06] [ 0.605280] pci 0000:07:00.0: working around ROM BAR overlap defect [ 0.605406] pci 0000:07:00.0: [8086:1533] type 00 class 0x020000 PCIe Endpoint [ 0.605638] pci 0000:07:00.0: BAR 0 [mem 0xfb300000-0xfb37ffff] [ 0.605864] pci 0000:07:00.0: BAR 2 [io 0xe000-0xe01f] [ 0.605927] pci 0000:07:00.0: BAR 3 [mem 0xfb380000-0xfb383fff] [ 0.606470] pci 0000:07:00.0: PME# supported from D0 D3hot D3cold [ 0.606957] pci 0000:00:1c.0: PCI bridge to [bus 07] [ 0.607341] pci 0000:08:00.0: working around ROM BAR overlap defect [ 0.607460] pci 0000:08:00.0: [8086:1533] type 00 class 0x020000 PCIe Endpoint [ 0.607693] pci 0000:08:00.0: BAR 0 [mem 0xfb200000-0xfb27ffff] [ 0.607921] pci 0000:08:00.0: BAR 2 [io 0xd000-0xd01f] [ 0.608091] pci 0000:08:00.0: BAR 3 [mem 0xfb280000-0xfb283fff] [ 0.608626] pci 0000:08:00.0: PME# supported from D0 D3hot D3cold [ 0.609106] pci 0000:00:1c.1: PCI bridge to [bus 08] [ 0.609477] pci 0000:09:00.0: [1a03:1150] type 01 class 0x060400 PCIe to PCI/PCI-X bridge [ 0.609811] pci 0000:09:00.0: PCI bridge to [bus 0a] [ 0.609907] pci 0000:09:00.0: bridge window [io 0xc000-0xcfff] [ 0.610037] pci 0000:09:00.0: bridge window [mem 0xfa000000-0xfb0fffff] [ 0.610275] pci 0000:09:00.0: enabling Extended Tags [ 0.610617] pci 0000:09:00.0: supports D1 D2 [ 0.610741] pci 0000:09:00.0: PME# supported from D0 D1 D2 D3hot D3cold [ 0.611106] pci 0000:00:1c.3: PCI bridge to [bus 09-0a] [ 0.611424] pci_bus 0000:0a: extended config space not accessible [ 0.611596] pci 0000:0a:00.0: [1a03:2000] type 00 class 0x030000 conventional PCI endpoint [ 0.611834] pci 0000:0a:00.0: BAR 0 [mem 0xfa000000-0xfaffffff] [ 0.611927] pci 0000:0a:00.0: BAR 1 [mem 0xfb000000-0xfb01ffff] [ 0.612099] pci 0000:0a:00.0: BAR 2 [io 0xc000-0xc07f] [ 0.612451] pci 0000:0a:00.0: Video device with shadowed ROM at [mem 0x000c0000-0x000dffff] [ 0.612750] pci 0000:0a:00.0: supports D1 D2 [ 0.612863] pci 0000:0a:00.0: PME# supported from D0 D1 D2 D3hot D3cold [ 0.613206] pci 0000:09:00.0: PCI bridge to [bus 0a] [ 0.613697] pci 0000:0b:00.0: [8086:1521] type 00 class 0x020000 PCIe Endpoint [ 0.613924] pci 0000:0b:00.0: BAR 0 [mem 0xfb160000-0xfb17ffff] [ 0.614132] pci 0000:0b:00.0: BAR 2 [io 0xb060-0xb07f] [ 0.614292] pci 0000:0b:00.0: BAR 3 [mem 0xfb18c000-0xfb18ffff] [ 0.614828] pci 0000:0b:00.0: PME# supported from D0 D3hot D3cold [ 0.614996] pci 0000:0b:00.0: VF BAR 0 [mem 0x00000000-0x00003fff 64bit pref] [ 0.615118] pci 0000:0b:00.0: VF BAR 0 [mem 0x00000000-0x0001ffff 64bit pref]: contains BAR 0 for 8 VFs [ 0.615332] pci 0000:0b:00.0: VF BAR 3 [mem 0x00000000-0x00003fff 64bit pref] [ 0.615463] pci 0000:0b:00.0: VF BAR 3 [mem 0x00000000-0x0001ffff 64bit pref]: contains BAR 3 for 8 VFs [ 0.616074] pci 0000:0b:00.1: [8086:1521] type 00 class 0x020000 PCIe Endpoint [ 0.616301] pci 0000:0b:00.1: BAR 0 [mem 0xfb140000-0xfb15ffff] [ 0.616520] pci 0000:0b:00.1: BAR 2 [io 0xb040-0xb05f] [ 0.616680] pci 0000:0b:00.1: BAR 3 [mem 0xfb188000-0xfb18bfff] [ 0.617196] pci 0000:0b:00.1: PME# supported from D0 D3hot D3cold [ 0.617432] pci 0000:0b:00.1: VF BAR 0 [mem 0x00000000-0x00003fff 64bit pref] [ 0.617564] pci 0000:0b:00.1: VF BAR 0 [mem 0x00000000-0x0001ffff 64bit pref]: contains BAR 0 for 8 VFs [ 0.617777] pci 0000:0b:00.1: VF BAR 3 [mem 0x00000000-0x00003fff 64bit pref] [ 0.617879] pci 0000:0b:00.1: VF BAR 3 [mem 0x00000000-0x0001ffff 64bit pref]: contains BAR 3 for 8 VFs [ 0.618411] pci 0000:0b:00.2: [8086:1521] type 00 class 0x020000 PCIe Endpoint [ 0.618648] pci 0000:0b:00.2: BAR 0 [mem 0xfb120000-0xfb13ffff] [ 0.618888] pci 0000:0b:00.2: BAR 2 [io 0xb020-0xb03f] [ 0.619048] pci 0000:0b:00.2: BAR 3 [mem 0xfb184000-0xfb187fff] [ 0.619575] pci 0000:0b:00.2: PME# supported from D0 D3hot D3cold [ 0.619804] pci 0000:0b:00.2: VF BAR 0 [mem 0x00000000-0x00003fff 64bit pref] [ 0.619879] pci 0000:0b:00.2: VF BAR 0 [mem 0x00000000-0x0001ffff 64bit pref]: contains BAR 0 for 8 VFs [ 0.620099] pci 0000:0b:00.2: VF BAR 3 [mem 0x00000000-0x00003fff 64bit pref] [ 0.620221] pci 0000:0b:00.2: VF BAR 3 [mem 0x00000000-0x0001ffff 64bit pref]: contains BAR 3 for 8 VFs [ 0.620759] pci 0000:0b:00.3: [8086:1521] type 00 class 0x020000 PCIe Endpoint [ 0.620961] pci 0000:0b:00.3: BAR 0 [mem 0xfb100000-0xfb11ffff] [ 0.621168] pci 0000:0b:00.3: BAR 2 [io 0xb000-0xb01f] [ 0.621333] pci 0000:0b:00.3: BAR 3 [mem 0xfb180000-0xfb183fff] [ 0.621860] pci 0000:0b:00.3: PME# supported from D0 D3hot D3cold [ 0.621989] pci 0000:0b:00.3: VF BAR 0 [mem 0x00000000-0x00003fff 64bit pref] [ 0.622112] pci 0000:0b:00.3: VF BAR 0 [mem 0x00000000-0x0001ffff 64bit pref]: contains BAR 0 for 8 VFs [ 0.622333] pci 0000:0b:00.3: VF BAR 3 [mem 0x00000000-0x00003fff 64bit pref] [ 0.622455] pci 0000:0b:00.3: VF BAR 3 [mem 0x00000000-0x0001ffff 64bit pref]: contains BAR 3 for 8 VFs [ 0.623022] pci 0000:00:1c.4: PCI bridge to [bus 0b] [ 0.623177] pci 0000:00:1c.4: bridge has subordinate 0b but max busn 0c [ 0.623724] pci_bus 0000:00: on NUMA node 0 [ 0.623825] xen: registering gsi 13 triggering 1 polarity 0 [ 0.624818] ACPI: PCI: Interrupt link LNKA configured for IRQ 11 [ 0.624954] ACPI: PCI: Interrupt link LNKB configured for IRQ 10 [ 0.625142] ACPI: PCI: Interrupt link LNKC configured for IRQ 5 [ 0.625344] ACPI: PCI: Interrupt link LNKD configured for IRQ 11 [ 0.625531] ACPI: PCI: Interrupt link LNKE configured for IRQ 0 [ 0.625649] ACPI: PCI: Interrupt link LNKE disabled [ 0.625837] ACPI: PCI: Interrupt link LNKF configured for IRQ 0 [ 0.625879] ACPI: PCI: Interrupt link LNKF disabled [ 0.626063] ACPI: PCI: Interrupt link LNKG configured for IRQ 0 [ 0.626185] ACPI: PCI: Interrupt link LNKG disabled [ 0.626369] ACPI: PCI: Interrupt link LNKH configured for IRQ 0 [ 0.626487] ACPI: PCI: Interrupt link LNKH disabled [ 0.626760] xen:balloon: Initialising balloon driver [ 0.626990] iommu: Default domain type: Translated [ 0.627106] iommu: DMA domain TLB invalidation policy: lazy mode [ 0.627286] SCSI subsystem initialized [ 0.627411] libata version 3.00 loaded. [ 0.627411] ACPI: bus type USB registered [ 0.627411] usbcore: registered new interface driver usbfs [ 0.627887] usbcore: registered new interface driver hub [ 0.628008] usbcore: registered new device driver usb [ 0.628147] pps_core: LinuxPPS API ver. 1 registered [ 0.628261] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti [ 0.628411] PTP clock support registered [ 0.628547] Advanced Linux Sound Architecture Driver Initialized. [ 0.629110] NetLabel: Initializing [ 0.629230] NetLabel: domain hash size = 128 [ 0.629342] NetLabel: protocols = UNLABELED CIPSOv4 CALIPSO [ 0.629475] NetLabel: unlabeled traffic allowed by default [ 0.629616] PCI: Using ACPI for IRQ routing [ 0.666300] PCI: pci_cache_line_size set to 64 bytes [ 0.667089] e820: reserve RAM buffer [mem 0x0009a000-0x0009ffff] [ 0.667092] e820: reserve RAM buffer [mem 0x20066000-0x23ffffff] [ 0.667117] pci 0000:0a:00.0: vgaarb: setting as boot VGA device [ 0.667117] pci 0000:0a:00.0: vgaarb: bridge control possible [ 0.667159] pci 0000:0a:00.0: vgaarb: VGA device added: decodes=io+mem,owns=io+mem,locks=none [ 0.667308] vgaarb: loaded [ 0.667979] clocksource: Switched to clocksource tsc-early [ 0.668214] VFS: Disk quotas dquot_6.6.0 [ 0.668332] VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes) [ 0.668485] hugetlbfs: disabling because there are no supported hugepage sizes [ 0.668639] pnp: PnP ACPI init [ 0.669025] xen: registering gsi 8 triggering 1 polarity 0 [ 0.669227] system 00:01: [io 0x0500-0x057f] has been reserved [ 0.669353] system 00:01: [io 0x0400-0x047f] has been reserved [ 0.669475] system 00:01: [io 0x0580-0x059f] has been reserved [ 0.669592] system 00:01: [io 0x0600-0x061f] has been reserved [ 0.669710] system 00:01: [io 0x0880-0x0883] has been reserved [ 0.669792] system 00:01: [io 0x0800-0x081f] has been reserved [ 0.669970] system 00:01: [mem 0xfed1c000-0xfed3ffff] could not be reserved [ 0.670090] system 00:01: [mem 0xfed45000-0xfed8bfff] has been reserved [ 0.670210] system 00:01: [mem 0xff000000-0xffffffff] has been reserved [ 0.670329] system 00:01: [mem 0xfee00000-0xfeefffff] has been reserved [ 0.670460] system 00:01: [mem 0xfed12000-0xfed1200f] has been reserved [ 0.670580] system 00:01: [mem 0xfed12010-0xfed1201f] has been reserved [ 0.670699] system 00:01: [mem 0xfed1b000-0xfed1bfff] has been reserved [ 0.671112] system 00:02: [io 0x0a00-0x0a0f] has been reserved [ 0.671234] system 00:02: [io 0x0a10-0x0a1f] has been reserved [ 0.671351] system 00:02: [io 0x0a20-0x0a2f] has been reserved [ 0.671468] system 00:02: [io 0x0a30-0x0a3f] has been reserved [ 0.671586] system 00:02: [io 0x0a40-0x0a4f] has been reserved [ 0.672008] xen: registering gsi 4 triggering 1 polarity 0 [ 0.672012] Already setup the GSI :4 [ 0.672123] pnp 00:03: [dma 0 disabled] [ 0.672430] xen: registering gsi 3 triggering 1 polarity 0 [ 0.672441] pnp 00:04: [dma 0 disabled] [ 0.672996] pnp: PnP ACPI: found 5 devices [ 0.704564] PM-Timer failed consistency check (0xffffff) - aborting. [ 0.704753] NET: Registered PF_INET protocol family [ 0.704923] IP idents hash table entries: 8192 (order: 4, 65536 bytes, linear) [ 0.705278] tcp_listen_portaddr_hash hash table entries: 256 (order: 0, 4096 bytes, linear) [ 0.705428] Table-perturb hash table entries: 65536 (order: 6, 262144 bytes, linear) [ 0.705573] TCP established hash table entries: 4096 (order: 3, 32768 bytes, linear) [ 0.705721] TCP bind hash table entries: 4096 (order: 5, 131072 bytes, linear) [ 0.705912] TCP: Hash tables configured (established 4096 bind 4096) [ 0.706085] UDP hash table entries: 256 (order: 1, 8192 bytes, linear) [ 0.706207] UDP-Lite hash table entries: 256 (order: 1, 8192 bytes, linear) [ 0.706356] NET: Registered PF_UNIX/PF_LOCAL protocol family [ 0.706743] RPC: Registered named UNIX socket transport module. [ 0.706863] RPC: Registered udp transport module. [ 0.706996] RPC: Registered tcp transport module. [ 0.707109] RPC: Registered tcp-with-tls transport module. [ 0.707224] RPC: Registered tcp NFSv4.1 backchannel transport module. [ 0.707826] pci 0000:00:1c.4: bridge window [mem 0x00100000-0x000fffff 64bit pref] to [bus 0b] add_size 100000 add_align 100000 [ 0.708050] pci 0000:00:1c.4: bridge window [mem 0x90000000-0x900fffff 64bit pref]: assigned [ 0.708199] pci 0000:00:01.0: PCI bridge to [bus 01] [ 0.708373] pci 0000:00:01.1: PCI bridge to [bus 02] [ 0.708546] pci 0000:00:02.0: PCI bridge to [bus 03] [ 0.708679] pci 0000:00:02.0: bridge window [mem 0xfb500000-0xfb5fffff] [ 0.709958] pci 0000:04:00.0: VF BAR 0 [mem size 0x00100000 64bit]: can't assign; no space [ 0.710105] pci 0000:04:00.0: VF BAR 0 [mem size 0x00100000 64bit]: failed to assign [ 0.710249] pci 0000:04:00.0: VF BAR 3 [mem size 0x00100000 64bit]: can't assign; no space [ 0.710394] pci 0000:04:00.0: VF BAR 3 [mem size 0x00100000 64bit]: failed to assign [ 0.710537] pci 0000:04:00.1: VF BAR 0 [mem size 0x00100000 64bit]: can't assign; no space [ 0.710689] pci 0000:04:00.1: VF BAR 0 [mem size 0x00100000 64bit]: failed to assign [ 0.710833] pci 0000:04:00.1: VF BAR 3 [mem size 0x00100000 64bit]: can't assign; no space [ 0.710988] pci 0000:04:00.1: VF BAR 3 [mem size 0x00100000 64bit]: failed to assign [ 0.711133] pci 0000:04:00.0: VF BAR 0 [mem size 0x00100000 64bit]: can't assign; no space [ 0.711278] pci 0000:04:00.0: VF BAR 0 [mem size 0x00100000 64bit]: failed to assign [ 0.711422] pci 0000:04:00.0: VF BAR 3 [mem size 0x00100000 64bit]: can't assign; no space [ 0.711567] pci 0000:04:00.0: VF BAR 3 [mem size 0x00100000 64bit]: failed to assign [ 0.711710] pci 0000:04:00.1: VF BAR 0 [mem size 0x00100000 64bit]: can't assign; no space [ 0.711855] pci 0000:04:00.1: VF BAR 0 [mem size 0x00100000 64bit]: failed to assign [ 0.712035] pci 0000:04:00.1: VF BAR 3 [mem size 0x00100000 64bit]: can't assign; no space [ 0.712180] pci 0000:04:00.1: VF BAR 3 [mem size 0x00100000 64bit]: failed to assign [ 0.712324] pci 0000:00:02.2: PCI bridge to [bus 04] [ 0.712458] pci 0000:00:02.2: bridge window [mem 0xfb400000-0xfb4fffff] [ 0.712591] pci 0000:00:02.2: bridge window [mem 0xfba00000-0xfbefffff 64bit pref] [ 0.712761] pci 0000:00:03.0: PCI bridge to [bus 05] [ 0.712953] pci 0000:00:03.2: PCI bridge to [bus 06] [ 0.713126] pci 0000:00:1c.0: PCI bridge to [bus 07] [ 0.713246] pci 0000:00:1c.0: bridge window [io 0xe000-0xefff] [ 0.713384] pci 0000:00:1c.0: bridge window [mem 0xfb300000-0xfb3fffff] [ 0.713550] pci 0000:00:1c.1: PCI bridge to [bus 08] [ 0.713669] pci 0000:00:1c.1: bridge window [io 0xd000-0xdfff] [ 0.713807] pci 0000:00:1c.1: bridge window [mem 0xfb200000-0xfb2fffff] [ 0.713983] pci 0000:09:00.0: PCI bridge to [bus 0a] [ 0.714103] pci 0000:09:00.0: bridge window [io 0xc000-0xcfff] [ 0.714243] pci 0000:09:00.0: bridge window [mem 0xfa000000-0xfb0fffff] [ 0.714407] pci 0000:00:1c.3: PCI bridge to [bus 09-0a] [ 0.714527] pci 0000:00:1c.3: bridge window [io 0xc000-0xcfff] [ 0.714665] pci 0000:00:1c.3: bridge window [mem 0xfa000000-0xfb0fffff] [ 0.714833] pci 0000:0b:00.0: VF BAR 0 [mem 0x90000000-0x9001ffff 64bit pref]: assigned [ 0.715000] pci 0000:0b:00.0: VF BAR 3 [mem 0x90020000-0x9003ffff 64bit pref]: assigned [ 0.715153] pci 0000:0b:00.1: VF BAR 0 [mem 0x90040000-0x9005ffff 64bit pref]: assigned [ 0.715305] pci 0000:0b:00.1: VF BAR 3 [mem 0x90060000-0x9007ffff 64bit pref]: assigned [ 0.715457] pci 0000:0b:00.2: VF BAR 0 [mem 0x90080000-0x9009ffff 64bit pref]: assigned [ 0.715608] pci 0000:0b:00.2: VF BAR 3 [mem 0x900a0000-0x900bffff 64bit pref]: assigned [ 0.715760] pci 0000:0b:00.3: VF BAR 0 [mem 0x900c0000-0x900dffff 64bit pref]: assigned [ 0.715930] pci 0000:0b:00.3: VF BAR 3 [mem 0x900e0000-0x900fffff 64bit pref]: assigned [ 0.716083] pci 0000:00:1c.4: PCI bridge to [bus 0b] [ 0.716209] pci 0000:00:1c.4: bridge window [io 0xb000-0xbfff] [ 0.716348] pci 0000:00:1c.4: bridge window [mem 0xfb100000-0xfb1fffff] [ 0.716481] pci 0000:00:1c.4: bridge window [mem 0x90000000-0x900fffff 64bit pref] [ 0.716653] pci_bus 0000:00: Some PCI device resources are unassigned, try booting with pci=realloc [ 0.716802] pci_bus 0000:00: resource 4 [io 0x0000-0x0cf7 window] [ 0.716937] pci_bus 0000:00: resource 5 [io 0x1000-0xffff window] [ 0.717056] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff window] [ 0.717176] pci_bus 0000:00: resource 7 [mem 0x90000000-0xfbffbfff window] [ 0.717296] pci_bus 0000:03: resource 1 [mem 0xfb500000-0xfb5fffff] [ 0.717414] pci_bus 0000:04: resource 1 [mem 0xfb400000-0xfb4fffff] [ 0.717532] pci_bus 0000:04: resource 2 [mem 0xfba00000-0xfbefffff 64bit pref] [ 0.717679] pci_bus 0000:07: resource 0 [io 0xe000-0xefff] [ 0.717795] pci_bus 0000:07: resource 1 [mem 0xfb300000-0xfb3fffff] [ 0.717929] pci_bus 0000:08: resource 0 [io 0xd000-0xdfff] [ 0.718045] pci_bus 0000:08: resource 1 [mem 0xfb200000-0xfb2fffff] [ 0.718163] pci_bus 0000:09: resource 0 [io 0xc000-0xcfff] [ 0.718279] pci_bus 0000:09: resource 1 [mem 0xfa000000-0xfb0fffff] [ 0.718397] pci_bus 0000:0a: resource 0 [io 0xc000-0xcfff] [ 0.718512] pci_bus 0000:0a: resource 1 [mem 0xfa000000-0xfb0fffff] [ 0.718630] pci_bus 0000:0b: resource 0 [io 0xb000-0xbfff] [ 0.718745] pci_bus 0000:0b: resource 1 [mem 0xfb100000-0xfb1fffff] [ 0.718863] pci_bus 0000:0b: resource 2 [mem 0x90000000-0x900fffff 64bit pref] [ 0.719418] pci 0000:00:05.0: disabled boot interrupts on device [8086:6f28] [ 0.719626] xen: registering gsi 19 triggering 0 polarity 1 [ 0.719658] xen: --> pirq=19 -> irq=19 (gsi=19) [ 0.728490] xen: registering gsi 18 triggering 0 polarity 1 [ 0.728513] xen: --> pirq=18 -> irq=18 (gsi=18) [ 0.744112] pci 0000:00:1a.0: quirk_usb_early_handoff+0x0/0x7c0 took 15303 usecs [ 0.744354] xen: registering gsi 18 triggering 0 polarity 1 [ 0.744360] Already setup the GSI :18 [ 0.760252] pci 0000:00:1d.0: quirk_usb_early_handoff+0x0/0x7c0 took 15576 usecs [ 0.760474] pci 0000:04:00.0: CLS mismatch (64 != 32), using 64 bytes [ 0.760648] PCI-DMA: Using software bounce buffering for IO (SWIOTLB) [ 0.760740] Unpacking initramfs... [ 0.760767] software IO TLB: mapped [mem 0x000000001b180000-0x000000001f180000] (64MB) [ 0.761117] kvm_intel: VMX not supported by CPU 1 [ 0.761232] kvm_amd: CPU 1 isn't AMD or Hygon [ 0.761347] clocksource: tsc: mask: 0xffffffffffffffff max_cycles: 0x1fb62f12e8c, max_idle_ns: 440795238402 ns [ 0.761603] clocksource: Switched to clocksource tsc [ 0.771525] Initialise system trusted keyrings [ 0.771818] workingset: timestamp_bits=62 max_order=17 bucket_order=0 [ 0.772128] NFS: Registering the id_resolver key type [ 0.772249] Key type id_resolver registered [ 0.772360] Key type id_legacy registered [ 0.772623] 9p: Installing v9fs 9p2000 file system support [ 0.790259] Key type asymmetric registered [ 0.790399] Asymmetric key parser 'x509' registered [ 0.790547] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 251) [ 0.790702] io scheduler mq-deadline registered [ 0.790815] io scheduler kyber registered [ 0.792946] xen: registering gsi 16 triggering 0 polarity 1 [ 0.792980] xen: --> pirq=16 -> irq=16 (gsi=16) [ 0.793405] xen: registering gsi 16 triggering 0 polarity 1 [ 0.793411] Already setup the GSI :16 [ 0.793884] xen: registering gsi 16 triggering 0 polarity 1 [ 0.793889] Already setup the GSI :16 [ 0.794206] xen: registering gsi 16 triggering 0 polarity 1 [ 0.794210] Already setup the GSI :16 [ 0.794564] xen: registering gsi 16 triggering 0 polarity 1 [ 0.794569] Already setup the GSI :16 [ 0.795055] xen: registering gsi 16 triggering 0 polarity 1 [ 0.795061] Already setup the GSI :16 [ 0.795551] xen: registering gsi 16 triggering 0 polarity 1 [ 0.795557] Already setup the GSI :16 [ 0.796008] xen: registering gsi 17 triggering 0 polarity 1 [ 0.796027] xen: --> pirq=17 -> irq=17 (gsi=17) [ 0.796365] xen: registering gsi 19 triggering 0 polarity 1 [ 0.796370] Already setup the GSI :19 [ 0.796851] xen: registering gsi 16 triggering 0 polarity 1 [ 0.796856] Already setup the GSI :16 [ 0.797520] input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input0 [ 0.797697] ACPI: button: Power Button [PWRB] [ 0.797844] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input1 [ 0.798106] ACPI: button: Power Button [PWRF] [ 0.798375] Monitor-Mwait will be used to enter C-1 state [ 0.798437] Monitor-Mwait will be used to enter C-2 state [ 0.798458] ACPI: \_SB_.SCK0.CP00: Found 2 idle states [ 0.798820] ACPI: \_SB_.SCK0.CP01: Found 2 idle states [ 0.799149] ACPI: \_SB_.SCK0.CP02: Found 2 idle states [ 0.799636] ACPI: \_SB_.SCK0.CP03: Found 2 idle states [ 0.800163] ACPI: \_SB_.SCK0.CP04: Found 2 idle states [ 0.800703] ACPI: \_SB_.SCK0.CP05: Found 2 idle states [ 0.801175] ACPI: \_SB_.SCK0.CP06: Found 2 idle states [ 0.801619] ACPI: \_SB_.SCK0.CP07: Found 2 idle states [ 0.802438] xen:xen_evtchn: Event-channel device installed [ 0.802659] xen_pciback: backend is vpci [ 0.803497] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled [ 0.803868] 00:04: ttyS1 at I/O 0x2f8 (irq = 3, base_baud = 115200) is a 16550A [ 0.804669] hpet_acpi_add: no address or irqs in _CRS [ 0.804925] Non-volatile memory driver v1.3 [ 0.807604] loop: module loaded [ 0.813640] mei_me 0000:00:16.0: Device doesn't have valid ME Interface [ 0.813661] ahci 0000:00:1f.2: version 3.0 [ 0.813864] xen: registering gsi 16 triggering 0 polarity 1 [ 0.813874] Already setup the GSI :16 [ 0.814212] ahci 0000:00:1f.2: AHCI vers 0001.0300, 32 command slots, 6 Gbps, SATA mode [ 0.814360] ahci 0000:00:1f.2: 6/6 ports implemented (port mask 0x3f) [ 0.814517] ahci 0000:00:1f.2: flags: 64bit ncq led clo pio ems apst [ 0.830053] scsi host0: ahci [ 0.830402] scsi host1: ahci [ 0.830722] scsi host2: ahci [ 0.831041] scsi host3: ahci [ 0.831362] scsi host4: ahci [ 0.831714] scsi host5: ahci [ 0.831862] ata1: SATA max UDMA/133 abar m2048@0xfb612000 port 0xfb612100 irq 83 lpm-pol 0 [ 0.832009] ata2: SATA max UDMA/133 abar m2048@0xfb612000 port 0xfb612180 irq 83 lpm-pol 0 [ 0.832155] ata3: SATA max UDMA/133 abar m2048@0xfb612000 port 0xfb612200 irq 83 lpm-pol 0 [ 0.832300] ata4: SATA max UDMA/133 abar m2048@0xfb612000 port 0xfb612280 irq 83 lpm-pol 0 [ 0.832471] ata5: SATA max UDMA/133 abar m2048@0xfb612000 port 0xfb612300 irq 83 lpm-pol 0 [ 0.832645] ata6: SATA max UDMA/133 abar m2048@0xfb612000 port 0xfb612380 irq 83 lpm-pol 0 [ 0.833159] tun: Universal TUN/TAP device driver, 1.6 [ 0.833433] e100: Intel(R) PRO/100 Network Driver [ 0.833579] e100: Copyright(c) 1999-2006 Intel Corporation [ 0.833717] sky2: driver version 1.30 [ 0.833900] xen_netfront: Initialising Xen virtual ethernet driver [ 0.835505] xen: registering gsi 18 triggering 0 polarity 1 [ 0.835517] Already setup the GSI :18 [ 0.835545] xen: registering gsi 19 triggering 0 polarity 1 [ 0.835604] xen: registering gsi 18 triggering 0 polarity 1 [ 0.835611] Already setup the GSI :18 [ 0.835750] Already setup the GSI :19 [ 0.835750] ehci-pci 0000:00:1a.0: EHCI Host Controller [ 0.836078] ehci-pci 0000:00:1a.0: new USB bus registered, assigned bus number 1 [ 0.836255] ehci-pci 0000:00:1a.0: debug port 2 [ 0.840407] ehci-pci 0000:00:1a.0: irq 18, io mem 0xfb614000 [ 0.847436] ehci-pci 0000:00:1a.0: USB 2.0 started, EHCI 1.00 [ 0.847827] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 6.10 [ 0.847983] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 0.848127] usb usb1: Product: EHCI Host Controller [ 0.848241] usb usb1: Manufacturer: Linux 6.10.0-rc5+ ehci_hcd [ 0.848358] usb usb1: SerialNumber: 0000:00:1a.0 [ 0.848732] hub 1-0:1.0: USB hub found [ 0.848887] hub 1-0:1.0: 2 ports detected [ 0.849287] xhci_hcd 0000:00:14.0: xHCI Host Controller [ 0.849527] xhci_hcd 0000:00:14.0: new USB bus registered, assigned bus number 2 [ 0.850754] xhci_hcd 0000:00:14.0: hcc params 0x200077c1 hci version 0x100 quirks 0x0000000000009810 [ 0.851252] xhci_hcd 0000:00:14.0: xHCI Host Controller [ 0.851296] ehci-pci 0000:00:1d.0: EHCI Host Controller [ 0.851502] xhci_hcd 0000:00:14.0: new USB bus registered, assigned bus number 3 [ 0.851506] xhci_hcd 0000:00:14.0: Host supports USB 3.0 SuperSpeed [ 0.851599] ehci-pci 0000:00:1d.0: new USB bus registered, assigned bus number 4 [ 0.851886] usb usb2: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 6.10 [ 0.851948] ehci-pci 0000:00:1d.0: debug port 2 [ 0.852071] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 0.852337] usb usb2: Product: xHCI Host Controller [ 0.852479] usb usb2: Manufacturer: Linux 6.10.0-rc5+ xhci-hcd [ 0.852599] usb usb2: SerialNumber: 0000:00:14.0 [ 0.852959] hub 2-0:1.0: USB hub found [ 0.853122] hub 2-0:1.0: 8 ports detected [ 0.854688] usb usb3: New USB device found, idVendor=1d6b, idProduct=0003, bcdDevice= 6.10 [ 0.854842] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 0.854987] usb usb3: Product: xHCI Host Controller [ 0.855103] usb usb3: Manufacturer: Linux 6.10.0-rc5+ xhci-hcd [ 0.855222] usb usb3: SerialNumber: 0000:00:14.0 [ 0.855577] hub 3-0:1.0: USB hub found [ 0.855734] hub 3-0:1.0: 6 ports detected [ 0.856042] ehci-pci 0000:00:1d.0: irq 18, io mem 0xfb613000 [ 0.856963] usbcore: registered new interface driver usblp [ 0.857095] usbcore: registered new interface driver usb-storage [ 0.857241] i8042: PNP: No PS/2 controller found. [ 0.857628] rtc_cmos 00:00: RTC can wake from S4 [ 0.858298] rtc_cmos 00:00: registered as rtc0 [ 0.858482] rtc_cmos 00:00: alarms up to one month, y3k, 114 bytes nvram [ 0.858669] device-mapper: uevent: version 1.0.3 [ 0.858765] xen: registering gsi 18 triggering 0 polarity 1 [ 0.858791] Already setup the GSI :18 [ 0.858939] device-mapper: ioctl: 4.48.0-ioctl (2023-03-01) initialised: dm-devel@lists.linux.dev [ 0.858945] i801_smbus 0000:00:1f.3: SPD Write Disable is set [ 0.858959] intel_pstate: CPU model not supported [ 0.858978] i801_smbus 0000:00:1f.3: SMBus using PCI interrupt [ 0.859117] hid: raw HID events driver (C) Jiri Kosina [ 0.859705] usbcore: registered new interface driver usbhid [ 0.859821] usbhid: USB HID core driver [ 0.860389] Initializing XFRM netlink socket [ 0.860569] NET: Registered PF_INET6 protocol family [ 0.861013] Segment Routing with IPv6 [ 0.861133] In-situ OAM (IOAM) with IPv6 [ 0.861274] sit: IPv6, IPv4 and MPLS over IPv4 tunneling driver [ 0.861546] NET: Registered PF_PACKET protocol family [ 0.861695] 9pnet: Installing 9P2000 support [ 0.861821] Key type dns_resolver registered [ 0.862713] IPI shorthand broadcast: enabled [ 0.863450] ehci-pci 0000:00:1d.0: USB 2.0 started, EHCI 1.00 [ 0.863781] usb usb4: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 6.10 [ 0.863936] usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 0.864080] usb usb4: Product: EHCI Host Controller [ 0.864194] usb usb4: Manufacturer: Linux 6.10.0-rc5+ ehci_hcd [ 0.864311] usb usb4: SerialNumber: 0000:00:1d.0 [ 0.864746] hub 4-0:1.0: USB hub found [ 0.864894] hub 4-0:1.0: 2 ports detected [ 0.865870] sched_clock: Marking stable (828006279, 37373800)->(1751448375, -886068296) [ 0.866479] Timer migration: 1 hierarchy levels; 8 children per group; 1 crossnode level [ 0.867117] registered taskstats version 1 [ 0.867252] Loading compiled-in X.509 certificates [ 0.868904] PM: Magic number: 12:259:109 [ 0.869133] printk: legacy console [netcon0] enabled [ 0.869250] netconsole: network logging started [ 0.869642] cfg80211: Loading compiled-in X.509 certificates for regulatory database [ 0.874984] Freeing initrd memory: 20116K [ 0.886870] Loaded X.509 cert 'sforshee: 00b28ddf47aef9cea7' [ 0.887208] Loaded X.509 cert 'wens: 61c038651aabdcf94bd0ac7ff06c7248db18c600' [ 0.887371] ALSA device list: [ 0.887510] No soundcards found. [ 0.888192] cfg80211: loaded regulatory.db is malformed or signature is missing/invalid [ 1.084500] usb 1-1: new high-speed USB device number 2 using ehci-pci [ 1.092500] usb 2-3: new high-speed USB device number 2 using xhci_hcd [ 1.100489] usb 4-1: new high-speed USB device number 2 using ehci-pci [ 1.145765] ata5: SATA link down (SStatus 0 SControl 300) [ 1.146073] ata3: SATA link up 6.0 Gbps (SStatus 133 SControl 300) [ 1.146220] ata1: SATA link down (SStatus 0 SControl 300) [ 1.146395] ata6: SATA link down (SStatus 0 SControl 300) [ 1.146541] ata2: SATA link down (SStatus 0 SControl 300) [ 1.146688] ata4: SATA link down (SStatus 0 SControl 300) [ 1.147410] ata3.00: ATA-10: HGST HUS722T1TALA604, RAGNWA05, max UDMA/133 [ 1.213103] usb 1-1: New USB device found, idVendor=8087, idProduct=8008, bcdDevice= 0.05 [ 1.213258] usb 1-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0 [ 1.213755] hub 1-1:1.0: USB hub found [ 1.213974] hub 1-1:1.0: 4 ports detected [ 1.220022] usb 2-3: New USB device found, idVendor=05e3, idProduct=0610, bcdDevice=32.98 [ 1.220177] usb 2-3: New USB device strings: Mfr=0, Product=1, SerialNumber=0 [ 1.220300] usb 2-3: Product: USB2.0 Hub [ 1.221119] hub 2-3:1.0: USB hub found [ 1.221527] hub 2-3:1.0: 4 ports detected [ 1.229271] usb 4-1: New USB device found, idVendor=8087, idProduct=8000, bcdDevice= 0.05 [ 1.229443] usb 4-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0 [ 1.229883] ata3.00: 1953525168 sectors, multi 16: LBA48 NCQ (depth 32), AA [ 1.229895] hub 4-1:1.0: USB hub found [ 1.229898] ata3.00: Features: NCQ-sndrcv NCQ-prio [ 1.229977] hub 4-1:1.0: 4 ports detected [ 1.257852] ata3.00: configured for UDMA/133 [ 1.258170] scsi 2:0:0:0: Direct-Access ATA HGST HUS722T1TAL WA05 PQ: 0 ANSI: 5 [ 1.259189] sd 2:0:0:0: Attached scsi generic sg0 type 0 [ 1.259259] sd 2:0:0:0: [sda] 1953525168 512-byte logical blocks: (1.00 TB/932 GiB) [ 1.259494] sd 2:0:0:0: [sda] Write Protect is off [ 1.259615] sd 2:0:0:0: [sda] Mode Sense: 00 3a 00 00 [ 1.259643] sd 2:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 1.259840] sd 2:0:0:0: [sda] Preferred minimum I/O size 512 bytes [ 1.276873] sda: sda1 sda2 < sda5 > [ 1.277429] sd 2:0:0:0: [sda] Attached SCSI disk [ 1.279311] Freeing unused kernel image (initmem) memory: 2680K [ 1.279462] Write protecting the kernel read-only data: 24576k [ 1.299250] Freeing unused kernel image (rodata/data gap) memory: 2028K [ 1.337412] usb 2-4: new high-speed USB device number 3 using xhci_hcd [ 1.463688] usb 2-4: New USB device found, idVendor=0557, idProduct=7000, bcdDevice= 0.00 [ 1.463843] usb 2-4: New USB device strings: Mfr=0, Product=0, SerialNumber=0 [ 1.464528] hub 2-4:1.0: USB hub found [ 1.464741] hub 2-4:1.0: 4 ports detected [ 1.758429] usb 2-4.1: new low-speed USB device number 4 using xhci_hcd [ 1.769593] x86/mm: Checked W+X mappings: passed, no W+X pages found. [ 1.769754] Run /init as init process [ 1.769895] with arguments: [ 1.769897] /init [ 1.769899] placeholder [ 1.769901] with environment: [ 1.769903] HOME=/ [ 1.769905] TERM=linux [ 1.864211] usb 2-4.1: New USB device found, idVendor=0557, idProduct=2419, bcdDevice= 1.00 [ 1.864409] usb 2-4.1: New USB device strings: Mfr=0, Product=0, SerialNumber=0 [ 1.870246] input: HID 0557:2419 as /devices/pci0000:00/0000:00:14.0/usb2/2-4/2-4.1/2-4.1:1.0/0003:0557:2419.0001/input/input2 [ 1.927547] hid-generic 0003:0557:2419.0001: input,hidraw0: USB HID v1.00 Keyboard [HID 0557:2419] on usb-0000:00:14.0-4.1/input0 [ 1.930776] input: HID 0557:2419 as /devices/pci0000:00/0000:00:14.0/usb2/2-4/2-4.1/2-4.1:1.1/0003:0557:2419.0002/input/input3 [ 1.931161] hid-generic 0003:0557:2419.0002: input,hidraw1: USB HID v1.00 Mouse [HID 0557:2419] on usb-0000:00:14.0-4.1/input1 [ 1.938464] usb 2-3.2: new high-speed USB device number 5 using xhci_hcd [ 2.015865] usb 2-3.2: New USB device found, idVendor=05e3, idProduct=0610, bcdDevice=32.98 [ 2.016021] usb 2-3.2: New USB device strings: Mfr=0, Product=1, SerialNumber=0 [ 2.016165] usb 2-3.2: Product: USB2.0 Hub [ 2.017003] hub 2-3.2:1.0: USB hub found [ 2.017436] hub 2-3.2:1.0: 4 ports detected [ 2.218044] ixgbe: Intel(R) 10 Gigabit PCI Express Network Driver [ 2.218187] ixgbe: Copyright (c) 1999-2016 Intel Corporation. [ 2.218578] ACPI Warning: \_SB.PCI0.BR2C._PRT: Return Package has no elements (empty) (20240322/nsprepkg-94) [ 2.219925] xen: registering gsi 16 triggering 0 polarity 1 [ 2.219934] Already setup the GSI :16 [ 2.224529] igb: Intel(R) Gigabit Ethernet Network Driver [ 2.224699] igb: Copyright (c) 2007-2014 Intel Corporation. [ 2.224983] xen: registering gsi 16 triggering 0 polarity 1 [ 2.224997] Already setup the GSI :16 [ 2.254879] pps pps0: new PPS source ptp0 [ 2.255145] igb 0000:07:00.0: added PHC on eth0 [ 2.255323] igb 0000:07:00.0: Intel(R) Gigabit Ethernet Network Connection [ 2.255494] igb 0000:07:00.0: eth0: (PCIe:2.5Gb/s:Width x1) 0c:c4:7a:93:a4:c8 [ 2.255702] igb 0000:07:00.0: eth0: PBA No: 010C00-000 [ 2.255853] igb 0000:07:00.0: Using MSI-X interrupts. 4 rx queue(s), 4 tx queue(s) [ 2.256162] xen: registering gsi 17 triggering 0 polarity 1 [ 2.256174] Already setup the GSI :17 [ 2.285962] pps pps1: new PPS source ptp1 [ 2.286228] igb 0000:08:00.0: added PHC on eth1 [ 2.286413] igb 0000:08:00.0: Intel(R) Gigabit Ethernet Network Connection [ 2.286571] igb 0000:08:00.0: eth1: (PCIe:2.5Gb/s:Width x1) 0c:c4:7a:93:a4:c9 [ 2.286768] igb 0000:08:00.0: eth1: PBA No: 010000-000 [ 2.286884] igb 0000:08:00.0: Using MSI-X interrupts. 4 rx queue(s), 4 tx queue(s) [ 2.287168] xen: registering gsi 16 triggering 0 polarity 1 [ 2.287180] Already setup the GSI :16 [ 2.344570] igb 0000:0b:00.0: added PHC on eth2 [ 2.344712] igb 0000:0b:00.0: Intel(R) Gigabit Ethernet Network Connection [ 2.344833] igb 0000:0b:00.0: eth2: (PCIe:5.0Gb/s:Width x4) 0c:c4:7a:93:a4:ca [ 2.345041] igb 0000:0b:00.0: eth2: PBA No: 010000-000 [ 2.345157] igb 0000:0b:00.0: Using MSI-X interrupts. 8 rx queue(s), 8 tx queue(s) [ 2.345429] xen: registering gsi 17 triggering 0 polarity 1 [ 2.345438] Already setup the GSI :17 [ 2.403537] igb 0000:0b:00.1: added PHC on eth3 [ 2.403701] igb 0000:0b:00.1: Intel(R) Gigabit Ethernet Network Connection [ 2.403822] igb 0000:0b:00.1: eth3: (PCIe:5.0Gb/s:Width x4) 0c:c4:7a:93:a4:cb [ 2.404029] igb 0000:0b:00.1: eth3: PBA No: 010000-000 [ 2.404170] igb 0000:0b:00.1: Using MSI-X interrupts. 8 rx queue(s), 8 tx queue(s) [ 2.404466] xen: registering gsi 18 triggering 0 polarity 1 [ 2.404474] Already setup the GSI :18 [ 2.460736] igb 0000:0b:00.2: added PHC on eth4 [ 2.460879] igb 0000:0b:00.2: Intel(R) Gigabit Ethernet Network Connection [ 2.460999] igb 0000:0b:00.2: eth4: (PCIe:5.0Gb/s:Width x4) 0c:c4:7a:93:a4:cc [ 2.461202] igb 0000:0b:00.2: eth4: PBA No: 010000-000 [ 2.461317] igb 0000:0b:00.2: Using MSI-X interrupts. 8 rx queue(s), 8 tx queue(s) [ 2.461585] xen: registering gsi 19 triggering 0 polarity 1 [ 2.461595] Already setup the GSI :19 [ 2.518677] igb 0000:0b:00.3: added PHC on eth5 [ 2.518821] igb 0000:0b:00.3: Intel(R) Gigabit Ethernet Network Connection [ 2.518941] igb 0000:0b:00.3: eth5: (PCIe:5.0Gb/s:Width x4) 0c:c4:7a:93:a4:cd [ 2.519144] igb 0000:0b:00.3: eth5: PBA No: 010000-000 [ 2.519259] igb 0000:0b:00.3: Using MSI-X interrupts. 8 rx queue(s), 8 tx queue(s) [ 2.522245] igb 0000:08:00.0 enx0cc47a93a4c9: renamed from eth1 [ 2.522706] igb 0000:07:00.0 enx0cc47a93a4c8: renamed from eth0 [ 2.523251] igb 0000:0b:00.1 enx0cc47a93a4cb: renamed from eth3 [ 2.523881] igb 0000:0b:00.2 enx0cc47a93a4cc: renamed from eth4 [ 2.524572] igb 0000:0b:00.0 enx0cc47a93a4ca: renamed from eth2 [ 2.525177] igb 0000:0b:00.3 enx0cc47a93a4cd: renamed from eth5 [ 2.957304] ixgbe 0000:04:00.0: Multiqueue Enabled: Rx Queue count = 8, Tx Queue count = 8 XDP Queue count = 0 [ 3.086986] ixgbe 0000:04:00.0: MAC: 5, PHY: 0, PBA No: 020B00-000 [ 3.087172] ixgbe 0000:04:00.0: 0c:c4:7a:93:a8:9e [ 3.377346] ixgbe 0000:04:00.0: Intel(R) 10 Gigabit Network Connection [ 3.377739] ACPI Warning: \_SB.PCI0.BR2C._PRT: Return Package has no elements (empty) (20240322/nsprepkg-94) [ 3.377987] xen: registering gsi 17 triggering 0 polarity 1 [ 3.377999] Already setup the GSI :17 [ 4.116948] ixgbe 0000:04:00.1: Multiqueue Enabled: Rx Queue count = 8, Tx Queue count = 8 XDP Queue count = 0 [ 4.246170] ixgbe 0000:04:00.1: MAC: 5, PHY: 0, PBA No: 020B00-000 [ 4.246330] ixgbe 0000:04:00.1: 0c:c4:7a:93:a8:9f [ 4.537448] ixgbe 0000:04:00.1: Intel(R) 10 Gigabit Network Connection [ 4.539927] ixgbe 0000:04:00.0 enx0cc47a93a89e: renamed from eth0 [ 4.540334] ixgbe 0000:04:00.1 enx0cc47a93a89f: renamed from eth1 [ 4.945887] EXT4-fs (dm-0): mounting ext3 file system using the ext4 subsystem [ 4.953834] EXT4-fs (dm-0): mounted filesystem fcfcca0a-0f60-47aa-897d-5a18771c7d4d ro with ordered data mode. Quota mode: none. [ 8.646071] EXT4-fs (dm-0): re-mounted fcfcca0a-0f60-47aa-897d-5a18771c7d4d r/w. Quota mode: none. [ 9.934968] EXT4-fs (sda1): mounting ext3 file system using the ext4 subsystem [ 9.949301] EXT4-fs (sda1): mounted filesystem 122bbd47-ddf8-4c82-8992-b0ba1f374b10 r/w with ordered data mode. Quota mode: none. [ 10.033354] Adding 1949692k swap on /dev/mapper/debina1--vg-swap_1. Priority:-2 extents:1 across:1949692k [ 11.652224] xenbr0: port 1(enx0cc47a93a4c8) entered blocking state [ 11.652445] xenbr0: port 1(enx0cc47a93a4c8) entered disabled state [ 11.652577] igb 0000:07:00.0 enx0cc47a93a4c8: entered allmulticast mode [ 11.652746] igb 0000:07:00.0 enx0cc47a93a4c8: entered promiscuous mode [ 14.632019] igb 0000:07:00.0 enx0cc47a93a4c8: igb: enx0cc47a93a4c8 NIC Link is Up 1000 Mbps Full Duplex, Flow Control: RX [ 14.842815] xenbr0: port 1(enx0cc47a93a4c8) entered blocking state [ 14.842968] xenbr0: port 1(enx0cc47a93a4c8) entered forwarding state