[ 0.000000] Linux version 6.1.95+ (osstest@himrod0) (gcc (Debian 12.2.0-14) 12.2.0, GNU ld (GNU Binutils for Debian) 2.40) #1 SMP PREEMPT_DYNAMIC Tue Jun 25 08:13:18 UTC 2024 [ 0.000000] Command line: placeholder root=/dev/mapper/debina0--vg-root ro console=hvc0 [ 0.000000] Released 0 page(s) [ 0.000000] BIOS-provided physical RAM map: [ 0.000000] Xen: [mem 0x0000000000000000-0x0000000000099fff] usable [ 0.000000] Xen: [mem 0x000000000009ac00-0x00000000000fffff] reserved [ 0.000000] Xen: [mem 0x0000000000100000-0x0000000020065fff] usable [ 0.000000] Xen: [mem 0x00000000796ef000-0x00000000798bdfff] reserved [ 0.000000] Xen: [mem 0x00000000799b7000-0x0000000079e5afff] ACPI NVS [ 0.000000] Xen: [mem 0x0000000079e5b000-0x000000007bdb0fff] reserved [ 0.000000] Xen: [mem 0x000000007bdb2000-0x000000007be37fff] reserved [ 0.000000] Xen: [mem 0x0000000080000000-0x000000008fffffff] reserved [ 0.000000] Xen: [mem 0x00000000fbffc000-0x00000000fbffcfff] reserved [ 0.000000] Xen: [mem 0x00000000fec00000-0x00000000fec00fff] reserved [ 0.000000] Xen: [mem 0x00000000fed1c000-0x00000000fed1ffff] reserved [ 0.000000] Xen: [mem 0x00000000fee00000-0x00000000feefffff] reserved [ 0.000000] Xen: [mem 0x00000000ff000000-0x00000000ffffffff] reserved [ 0.000000] NX (Execute Disable) protection: active [ 0.000000] SMBIOS 2.8 present. [ 0.000000] DMI: Supermicro SYS-5018D-FN8T/X10SDV-TP8F, BIOS 1.0b 11/21/2016 [ 0.000000] Hypervisor detected: Xen PV [ 0.000460] tsc: Detected 2199.996 MHz processor [ 0.000900] e820: update [mem 0x00000000-0x00000fff] usable ==> reserved [ 0.000903] e820: remove [mem 0x000a0000-0x000fffff] usable [ 0.000910] last_pfn = 0x20066 max_arch_pfn = 0x400000000 [ 0.000912] Disabled [ 0.000912] x86/PAT: MTRRs disabled, skipping PAT initialization too. [ 0.000916] x86/PAT: Configuration [0-7]: WB WT UC- UC WC WP UC UC [ 0.000956] Kernel/User page tables isolation: disabled on XEN PV. [ 0.027656] RAMDISK: [mem 0x04000000-0x0536afff] [ 0.027664] ACPI: Early table checksum verification disabled [ 0.028263] ACPI: RSDP 0x00000000000F0580 000024 (v02 SUPERM) [ 0.028275] ACPI: XSDT 0x00000000799FF098 0000B4 (v01 SUPERM SMCI--MB 01072009 AMI 00010013) [ 0.028311] ACPI: FACP 0x0000000079A17AC0 00010C (v05 SUPERM SMCI--MB 01072009 AMI 00010013) [ 0.028359] ACPI: DSDT 0x00000000799FF1E8 0188D5 (v02 SUPERM SMCI--MB 01072009 INTL 20091013) [ 0.028376] ACPI: FACS 0x0000000079E59F80 000040 [ 0.028391] ACPI: APIC 0x0000000079A17BD0 0000BC (v03 SUPERM SMCI--MB 01072009 AMI 00010013) [ 0.028407] ACPI: FPDT 0x0000000079A17C90 000044 (v01 SUPERM SMCI--MB 01072009 AMI 00010013) [ 0.028423] ACPI: FIDT 0x0000000079A17CD8 00009C (v01 SUPERM SMCI--MB 01072009 AMI 00010013) [ 0.028439] ACPI: MCFG 0x0000000079A17D78 00003C (v01 SUPERM SMCI--MB 01072009 MSFT 00000097) [ 0.028455] ACPI: UEFI 0x0000000079A17DB8 000042 (v01 00000000 00000000) [ 0.028471] ACPI: DBG2 0x0000000079A17E00 000072 (v00 SUPERM SMCI--MB 00000000 INTL 20091013) [ 0.028487] ACPI: HPET 0x0000000079A17E78 000038 (v01 SUPERM SMCI--MB 00000001 INTL 20091013) [ 0.028503] ACPI: WDDT 0x0000000079A17EB0 000040 (v01 SUPERM SMCI--MB 00000000 INTL 20091013) [ 0.028519] ACPI: SSDT 0x0000000079A17EF0 00ED8B (v01 AMI PmMgt 00000001 INTL 20120913) [ 0.028535] ACPI: SSDT 0x0000000079A26C80 002285 (v02 SUPERM SpsNm 00000002 INTL 20120913) [ 0.028551] ACPI: SSDT 0x0000000079A28F08 000064 (v02 SUPERM SpsNvs 00000002 INTL 20120913) [ 0.028567] ACPI: PRAD 0x0000000079A28F70 000102 (v02 SUPERM SMCI--MB 00000002 INTL 20120913) [ 0.028583] ACPI: RMAD 0x0000000079A29078 0000CC (v01 SUPERM SMCI--MB 00000001 INTL 20091013) [ 0.028599] ACPI: HEST 0x0000000079A29148 0000A8 (v01 SUPERM SMCI--MB 00000001 INTL 00000001) [ 0.028615] ACPI: BERT 0x0000000079A291F0 000030 (v01 SUPERM SMCI--MB 00000001 INTL 00000001) [ 0.028631] ACPI: ERST 0x0000000079A29220 000230 (v01 SUPERM SMCI--MB 00000001 INTL 00000001) [ 0.028647] ACPI: EINJ 0x0000000079A29450 000130 (v01 SUPERM SMCI--MB 00000001 INTL 00000001) [ 0.028655] ACPI: Reserving FACP table memory at [mem 0x79a17ac0-0x79a17bcb] [ 0.028657] ACPI: Reserving DSDT table memory at [mem 0x799ff1e8-0x79a17abc] [ 0.028658] ACPI: Reserving FACS table memory at [mem 0x79e59f80-0x79e59fbf] [ 0.028659] ACPI: Reserving APIC table memory at [mem 0x79a17bd0-0x79a17c8b] [ 0.028660] ACPI: Reserving FPDT table memory at [mem 0x79a17c90-0x79a17cd3] [ 0.028661] ACPI: Reserving FIDT table memory at [mem 0x79a17cd8-0x79a17d73] [ 0.028667] ACPI: Reserving MCFG table memory at [mem 0x79a17d78-0x79a17db3] [ 0.028668] ACPI: Reserving UEFI table memory at [mem 0x79a17db8-0x79a17df9] [ 0.028669] ACPI: Reserving DBG2 table memory at [mem 0x79a17e00-0x79a17e71] [ 0.028670] ACPI: Reserving HPET table memory at [mem 0x79a17e78-0x79a17eaf] [ 0.028671] ACPI: Reserving WDDT table memory at [mem 0x79a17eb0-0x79a17eef] [ 0.028672] ACPI: Reserving SSDT table memory at [mem 0x79a17ef0-0x79a26c7a] [ 0.028673] ACPI: Reserving SSDT table memory at [mem 0x79a26c80-0x79a28f04] [ 0.028674] ACPI: Reserving SSDT table memory at [mem 0x79a28f08-0x79a28f6b] [ 0.028675] ACPI: Reserving PRAD table memory at [mem 0x79a28f70-0x79a29071] [ 0.028676] ACPI: Reserving RMAD table memory at [mem 0x79a29078-0x79a29143] [ 0.028677] ACPI: Reserving HEST table memory at [mem 0x79a29148-0x79a291ef] [ 0.028678] ACPI: Reserving BERT table memory at [mem 0x79a291f0-0x79a2921f] [ 0.028679] ACPI: Reserving ERST table memory at [mem 0x79a29220-0x79a2944f] [ 0.028680] ACPI: Reserving EINJ table memory at [mem 0x79a29450-0x79a2957f] [ 0.028725] Setting APIC routing to Xen PV. [ 0.032677] Zone ranges: [ 0.032678] DMA [mem 0x0000000000001000-0x0000000000ffffff] [ 0.032681] DMA32 [mem 0x0000000001000000-0x0000000020065fff] [ 0.032682] Normal empty [ 0.032684] Movable zone start for each node [ 0.032684] Early memory node ranges [ 0.032685] node 0: [mem 0x0000000000001000-0x0000000000099fff] [ 0.032687] node 0: [mem 0x0000000000100000-0x0000000020065fff] [ 0.032688] Initmem setup node 0 [mem 0x0000000000001000-0x0000000020065fff] [ 0.032693] On node 0, zone DMA: 1 pages in unavailable ranges [ 0.032730] On node 0, zone DMA: 102 pages in unavailable ranges [ 0.034281] On node 0, zone DMA32: 32666 pages in unavailable ranges [ 0.034285] p2m virtual area at (____ptrval____), size is 40000000 [ 0.221785] Remapped 102 page(s) [ 0.223161] ACPI: PM-Timer IO Port: 0x408 [ 0.223214] ACPI: LAPIC_NMI (acpi_id[0x00] high level lint[0x1]) [ 0.223217] ACPI: LAPIC_NMI (acpi_id[0x02] high level lint[0x1]) [ 0.223219] ACPI: LAPIC_NMI (acpi_id[0x04] high level lint[0x1]) [ 0.223220] ACPI: LAPIC_NMI (acpi_id[0x06] high level lint[0x1]) [ 0.223221] ACPI: LAPIC_NMI (acpi_id[0x01] high level lint[0x1]) [ 0.223223] ACPI: LAPIC_NMI (acpi_id[0x03] high level lint[0x1]) [ 0.223224] ACPI: LAPIC_NMI (acpi_id[0x05] high level lint[0x1]) [ 0.223226] ACPI: LAPIC_NMI (acpi_id[0x07] high level lint[0x1]) [ 0.223254] IOAPIC[0]: apic_id 8, version 32, address 0xfec00000, GSI 0-23 [ 0.223267] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl) [ 0.223271] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level) [ 0.223297] ACPI: Using ACPI (MADT) for SMP configuration information [ 0.223301] ACPI: HPET id: 0x8086a701 base: 0xfed00000 [ 0.223371] smpboot: Allowing 8 CPUs, 0 hotplug CPUs [ 0.223385] PM: hibernation: Registered nosave memory: [mem 0x00000000-0x00000fff] [ 0.223388] PM: hibernation: Registered nosave memory: [mem 0x0009a000-0x0009afff] [ 0.223389] PM: hibernation: Registered nosave memory: [mem 0x0009b000-0x000fffff] [ 0.223391] [mem 0x90000000-0xfbffbfff] available for PCI devices [ 0.223395] Booting kernel on Xen [ 0.223396] Xen version: 4.19-unstable (preserve-AD) [ 0.223399] clocksource: refined-jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 1910969940391419 ns [ 0.229631] setup_percpu: NR_CPUS:64 nr_cpumask_bits:8 nr_cpu_ids:8 nr_node_ids:1 [ 0.229915] percpu: Embedded 54 pages/cpu s180520 r8192 d32472 u262144 [ 0.229922] pcpu-alloc: s180520 r8192 d32472 u262144 alloc=1*2097152 [ 0.229925] pcpu-alloc: [0] 0 1 2 3 4 5 6 7 [ 0.230004] xen: PV spinlocks enabled [ 0.230007] PV qspinlock hash table entries: 256 (order: 0, 4096 bytes, linear) [ 0.230012] Built 1 zonelists, mobility grouping on. Total pages: 129006 [ 0.230014] Kernel command line: placeholder root=/dev/mapper/debina0--vg-root ro console=hvc0 [ 0.230052] Unknown kernel command line parameters "placeholder", will be passed to user space. [ 0.230062] random: crng init done [ 0.230111] Dentry cache hash table entries: 65536 (order: 7, 524288 bytes, linear) [ 0.230137] Inode-cache hash table entries: 32768 (order: 6, 262144 bytes, linear) [ 0.231454] mem auto-init: stack:all(zero), heap alloc:off, heap free:off [ 0.231457] software IO TLB: area num 8. [ 0.290871] Memory: 390032K/524284K available (14349K kernel code, 2682K rwdata, 4576K rodata, 1576K init, 1296K bss, 134000K reserved, 0K cma-reserved) [ 0.291039] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=8, Nodes=1 [ 0.293529] Dynamic Preempt: voluntary [ 0.293629] rcu: Preemptible hierarchical RCU implementation. [ 0.293630] rcu: RCU event tracing is enabled. [ 0.293630] rcu: RCU restricting CPUs from NR_CPUS=64 to nr_cpu_ids=8. [ 0.293632] Trampoline variant of Tasks RCU enabled. [ 0.293633] rcu: RCU calculated value of scheduler-enlistment delay is 100 jiffies. [ 0.293634] rcu: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=8 [ 0.304133] NR_IRQS: 4352, nr_irqs: 488, preallocated irqs: 16 [ 0.304259] xen:events: Using FIFO-based ABI [ 0.304283] xen: --> pirq=1 -> irq=1 (gsi=1) [ 0.304292] xen: --> pirq=2 -> irq=2 (gsi=2) [ 0.304300] xen: --> pirq=3 -> irq=3 (gsi=3) [ 0.304307] xen: --> pirq=4 -> irq=4 (gsi=4) [ 0.304315] xen: --> pirq=5 -> irq=5 (gsi=5) [ 0.304322] xen: --> pirq=6 -> irq=6 (gsi=6) [ 0.304329] xen: --> pirq=7 -> irq=7 (gsi=7) [ 0.304337] xen: --> pirq=8 -> irq=8 (gsi=8) [ 0.304344] xen: --> pirq=9 -> irq=9 (gsi=9) [ 0.304351] xen: --> pirq=10 -> irq=10 (gsi=10) [ 0.304359] xen: --> pirq=11 -> irq=11 (gsi=11) [ 0.304367] xen: --> pirq=12 -> irq=12 (gsi=12) [ 0.304374] xen: --> pirq=13 -> irq=13 (gsi=13) [ 0.304383] xen: --> pirq=14 -> irq=14 (gsi=14) [ 0.304391] xen: --> pirq=15 -> irq=15 (gsi=15) [ 0.304402] rcu: srcu_init: Setting srcu_struct sizes based on contention. [ 0.309759] Console: colour VGA+ 80x25 [ 0.324557] printk: console [tty0] enabled [ 0.325894] printk: console [hvc0] enabled [ 0.326034] ACPI: Core revision 20220331 [ 0.341533] clocksource: xen: mask: 0xffffffffffffffff max_cycles: 0x1cd42e4dffb, max_idle_ns: 881590591483 ns [ 0.341699] Xen: using vcpuop timer interface [ 0.341706] installing Xen timer for CPU 0 [ 0.341856] clocksource: tsc-early: mask: 0xffffffffffffffff max_cycles: 0x1fb62f12e8c, max_idle_ns: 440795238402 ns [ 0.342015] Calibrating delay loop (skipped), value calculated using timer frequency.. 4399.99 BogoMIPS (lpj=2199996) [ 0.342344] Last level iTLB entries: 4KB 64, 2MB 8, 4MB 8 [ 0.342461] Last level dTLB entries: 4KB 64, 2MB 0, 4MB 0, 1GB 4 [ 0.342588] Spectre V1 : Mitigation: usercopy/swapgs barriers and __user pointer sanitization [ 0.342738] Spectre V2 : Mitigation: Retpolines [ 0.343022] Spectre V2 : Spectre v2 / SpectreRSB mitigation: Filling RSB on context switch [ 0.343168] Spectre V2 : Spectre v2 / SpectreRSB : Filling RSB on VMEXIT [ 0.343288] Spectre V2 : Enabling Restricted Speculation for firmware calls [ 0.343410] Spectre V2 : mitigation: Enabling conditional Indirect Branch Prediction Barrier [ 0.343558] Spectre V2 : User space: Mitigation: STIBP via prctl [ 0.343677] Speculative Store Bypass: Mitigation: Speculative Store Bypass disabled via prctl [ 0.343829] MDS: Mitigation: Clear CPU buffers [ 0.343942] TAA: Mitigation: Clear CPU buffers [ 0.344019] MMIO Stale Data: Vulnerable: Clear CPU buffers attempted, no microcode [ 0.344184] x86/fpu: Supporting XSAVE feature 0x001: 'x87 floating point registers' [ 0.344332] x86/fpu: Supporting XSAVE feature 0x002: 'SSE registers' [ 0.344475] x86/fpu: Supporting XSAVE feature 0x004: 'AVX registers' [ 0.344594] x86/fpu: xstate_offset[2]: 576, xstate_sizes[2]: 256 [ 0.344714] x86/fpu: Enabled xstate features 0x7, context size is 832 bytes, using 'standard' format. [ 0.362440] Freeing SMP alternatives memory: 40K [ 0.362568] pid_max: default: 32768 minimum: 301 [ 0.363037] LSM: Security Framework initializing [ 0.363159] SELinux: Initializing. [ 0.363299] Mount-cache hash table entries: 1024 (order: 1, 8192 bytes, linear) [ 0.363450] Mountpoint-cache hash table entries: 1024 (order: 1, 8192 bytes, linear) [ 0.364106] cpu 0 spinlock event irq 25 [ 0.364226] VPMU disabled by hypervisor. [ 0.364659] cblist_init_generic: Setting adjustable number of callback queues. [ 0.364805] cblist_init_generic: Setting shift to 3 and lim to 1. [ 0.364962] Performance Events: unsupported p6 CPU model 86 no PMU driver, software events only. [ 0.365020] signal: max sigframe size: 1776 [ 0.365184] rcu: Hierarchical SRCU implementation. [ 0.365311] rcu: Max phase no-delay instances is 400. [ 0.365805] smp: Bringing up secondary CPUs ... [ 0.366140] installing Xen timer for CPU 1 [ 0.366611] cpu 1 spinlock event irq 35 [ 0.367156] MDS CPU bug present and SMT on, data leak possible. See https://www.kernel.org/doc/html/latest/admin-guide/hw-vuln/mds.html for more details. [ 0.367325] TAA CPU bug present and SMT on, data leak possible. See https://www.kernel.org/doc/html/latest/admin-guide/hw-vuln/tsx_async_abort.html for more details. [ 0.367514] MMIO Stale Data CPU bug present and SMT on, data leak possible. See https://www.kernel.org/doc/html/latest/admin-guide/hw-vuln/processor_mmio_stale_data.html for more details. [ 0.368237] installing Xen timer for CPU 2 [ 0.368708] cpu 2 spinlock event irq 41 [ 0.369137] installing Xen timer for CPU 3 [ 0.369573] cpu 3 spinlock event irq 47 [ 0.369573] installing Xen timer for CPU 4 [ 0.370354] cpu 4 spinlock event irq 53 [ 0.370354] installing Xen timer for CPU 5 [ 0.371186] cpu 5 spinlock event irq 59 [ 0.371220] installing Xen timer for CPU 6 [ 0.372058] cpu 6 spinlock event irq 65 [ 0.372270] installing Xen timer for CPU 7 [ 0.372698] cpu 7 spinlock event irq 71 [ 0.373262] smp: Brought up 1 node, 8 CPUs [ 0.373380] smpboot: Max logical packages: 1 [ 0.373599] devtmpfs: initialized [ 0.373599] x86/mm: Memory block size: 128MB [ 0.374255] ACPI: PM: Registering ACPI NVS region [mem 0x799b7000-0x79e5afff] (4866048 bytes) [ 0.374286] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 1911260446275000 ns [ 0.374443] futex hash table entries: 2048 (order: 5, 131072 bytes, linear) [ 0.374695] PM: RTC time: 08:30:08, date: 2024-06-25 [ 0.375159] NET: Registered PF_NETLINK/PF_ROUTE protocol family [ 0.375307] xen:grant_table: Grant tables using version 1 layout [ 0.375445] Grant table initialized [ 0.375751] audit: initializing netlink subsys (disabled) [ 0.375889] audit: type=2000 audit(1719304208.766:1): state=initialized audit_enabled=0 res=1 [ 0.376068] thermal_sys: Registered thermal governor 'step_wise' [ 0.376071] thermal_sys: Registered thermal governor 'user_space' [ 0.376224] ACPI FADT declares the system doesn't support PCIe ASPM, so disable it [ 0.376652] PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0x80000000-0x8fffffff] (base 0x80000000) [ 0.376807] PCI: MMCONFIG at [mem 0x80000000-0x8fffffff] reserved in E820 [ 0.503713] PCI: Using configuration type 1 for base access [ 0.506341] kprobes: kprobe jump-optimization is enabled. All kprobes are optimized if possible. [ 0.507078] ACPI: Added _OSI(Module Device) [ 0.507186] ACPI: Added _OSI(Processor Device) [ 0.507300] ACPI: Added _OSI(3.0 _SCP Extensions) [ 0.507414] ACPI: Added _OSI(Processor Aggregator Device) [ 0.537090] ACPI: 4 ACPI AML tables successfully acquired and loaded [ 0.539110] xen: registering gsi 9 triggering 0 polarity 0 [ 0.541858] ACPI: Dynamic OEM Table Load: [ 0.550794] ACPI: Interpreter enabled [ 0.550927] ACPI: PM: (supports S0 S4 S5) [ 0.551019] ACPI: Using IOAPIC for interrupt routing [ 0.551166] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug [ 0.551317] PCI: Using E820 reservations for host bridge windows [ 0.551892] ACPI: Enabled 6 GPEs in block 00 to 3F [ 0.577255] ACPI: PCI Root Bridge [UNC0] (domain 0000 [bus ff]) [ 0.577386] acpi PNP0A03:03: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI HPX-Type3] [ 0.577623] acpi PNP0A03:03: _OSC: platform does not support [LTR] [ 0.577887] acpi PNP0A03:03: _OSC: OS now controls [PME PCIeCapability] [ 0.578019] acpi PNP0A03:03: FADT indicates ASPM is unsupported, using BIOS configuration [ 0.578195] PCI host bridge to bus 0000:ff [ 0.578308] pci_bus 0000:ff: root bus resource [bus ff] [ 0.578502] pci 0000:ff:0b.0: [8086:6f81] type 00 class 0x088000 [ 0.578949] pci 0000:ff:0b.1: [8086:6f36] type 00 class 0x110100 [ 0.579350] pci 0000:ff:0b.2: [8086:6f37] type 00 class 0x110100 [ 0.579954] pci 0000:ff:0b.3: [8086:6f76] type 00 class 0x088000 [ 0.580340] pci 0000:ff:0c.0: [8086:6fe0] type 00 class 0x088000 [ 0.580949] pci 0000:ff:0c.1: [8086:6fe1] type 00 class 0x088000 [ 0.581322] pci 0000:ff:0c.2: [8086:6fe2] type 00 class 0x088000 [ 0.581745] pci 0000:ff:0c.3: [8086:6fe3] type 00 class 0x088000 [ 0.582195] pci 0000:ff:0f.0: [8086:6ff8] type 00 class 0x088000 [ 0.582630] pci 0000:ff:0f.4: [8086:6ffc] type 00 class 0x088000 [ 0.583056] pci 0000:ff:0f.5: [8086:6ffd] type 00 class 0x088000 [ 0.583480] pci 0000:ff:0f.6: [8086:6ffe] type 00 class 0x088000 [ 0.583907] pci 0000:ff:10.0: [8086:6f1d] type 00 class 0x088000 [ 0.584321] pci 0000:ff:10.1: [8086:6f34] type 00 class 0x110100 [ 0.584937] pci 0000:ff:10.5: [8086:6f1e] type 00 class 0x088000 [ 0.585322] pci 0000:ff:10.6: [8086:6f7d] type 00 class 0x110100 [ 0.585744] pci 0000:ff:10.7: [8086:6f1f] type 00 class 0x088000 [ 0.586173] pci 0000:ff:12.0: [8086:6fa0] type 00 class 0x088000 [ 0.586427] pci 0000:ff:12.1: [8086:6f30] type 00 class 0x110100 [ 0.586886] pci 0000:ff:13.0: [8086:6fa8] type 00 class 0x088000 [ 0.587363] pci 0000:ff:13.1: [8086:6f71] type 00 class 0x088000 [ 0.588037] pci 0000:ff:13.2: [8086:6faa] type 00 class 0x088000 [ 0.588701] pci 0000:ff:13.3: [8086:6fab] type 00 class 0x088000 [ 0.589178] pci 0000:ff:13.4: [8086:6fac] type 00 class 0x088000 [ 0.589645] pci 0000:ff:13.5: [8086:6fad] type 00 class 0x088000 [ 0.590107] pci 0000:ff:13.6: [8086:6fae] type 00 class 0x088000 [ 0.590539] pci 0000:ff:13.7: [8086:6faf] type 00 class 0x088000 [ 0.590972] pci 0000:ff:14.0: [8086:6fb0] type 00 class 0x088000 [ 0.591563] pci 0000:ff:14.1: [8086:6fb1] type 00 class 0x088000 [ 0.592032] pci 0000:ff:14.2: [8086:6fb2] type 00 class 0x088000 [ 0.592892] pci 0000:ff:14.3: [8086:6fb3] type 00 class 0x088000 [ 0.593559] pci 0000:ff:14.4: [8086:6fbc] type 00 class 0x088000 [ 0.593984] pci 0000:ff:14.5: [8086:6fbd] type 00 class 0x088000 [ 0.595342] pci 0000:ff:14.6: [8086:6fbe] type 00 class 0x088000 [ 0.595769] pci 0000:ff:14.7: [8086:6fbf] type 00 class 0x088000 [ 0.595769] pci 0000:ff:15.0: [8086:6fb4] type 00 class 0x088000 [ 0.595769] pci 0000:ff:15.1: [8086:6fb5] type 00 class 0x088000 [ 0.596013] pci 0000:ff:15.2: [8086:6fb6] type 00 class 0x088000 [ 0.596013] pci 0000:ff:15.3: [8086:6fb7] type 00 class 0x088000 [ 0.597208] pci 0000:ff:1e.0: [8086:6f98] type 00 class 0x088000 [ 0.597634] pci 0000:ff:1e.1: [8086:6f99] type 00 class 0x088000 [ 0.598062] pci 0000:ff:1e.2: [8086:6f9a] type 00 class 0x088000 [ 0.598491] pci 0000:ff:1e.3: [8086:6fc0] type 00 class 0x088000 [ 0.598740] pci 0000:ff:1e.4: [8086:6f9c] type 00 class 0x088000 [ 0.599186] pci 0000:ff:1f.0: [8086:6f88] type 00 class 0x088000 [ 0.599620] pci 0000:ff:1f.2: [8086:6f8a] type 00 class 0x088000 [ 0.600049] pci_bus 0000:ff: on NUMA node 0 [ 0.604415] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-fe]) [ 0.604545] acpi PNP0A08:00: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI HPX-Type3] [ 0.604823] acpi PNP0A08:00: _OSC: platform does not support [PME LTR] [ 0.605195] acpi PNP0A08:00: _OSC: OS now controls [PCIeCapability] [ 0.605316] acpi PNP0A08:00: FADT indicates ASPM is unsupported, using BIOS configuration [ 0.605799] PCI host bridge to bus 0000:00 [ 0.605914] pci_bus 0000:00: root bus resource [io 0x0000-0x0cf7 window] [ 0.606019] pci_bus 0000:00: root bus resource [io 0x1000-0xffff window] [ 0.606140] pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff window] [ 0.606290] pci_bus 0000:00: root bus resource [mem 0x90000000-0xfbffbfff window] [ 0.606435] pci_bus 0000:00: root bus resource [bus 00-fe] [ 0.606616] pci 0000:00:00.0: [8086:6f00] type 00 class 0x060000 [ 0.607256] pci 0000:00:01.0: [8086:6f02] type 01 class 0x060400 [ 0.607778] pci 0000:00:01.0: PME# supported from D0 D3hot D3cold [ 0.608153] pci 0000:00:01.1: [8086:6f03] type 01 class 0x060400 [ 0.608674] pci 0000:00:01.1: PME# supported from D0 D3hot D3cold [ 0.609069] pci 0000:00:02.0: [8086:6f04] type 01 class 0x060400 [ 0.609587] pci 0000:00:02.0: PME# supported from D0 D3hot D3cold [ 0.609942] pci 0000:00:02.2: [8086:6f06] type 01 class 0x060400 [ 0.610415] pci 0000:00:02.2: PME# supported from D0 D3hot D3cold [ 0.610790] pci 0000:00:03.0: [8086:6f08] type 01 class 0x060400 [ 0.611313] pci 0000:00:03.0: PME# supported from D0 D3hot D3cold [ 0.611680] pci 0000:00:03.2: [8086:6f0a] type 01 class 0x060400 [ 0.612202] pci 0000:00:03.2: PME# supported from D0 D3hot D3cold [ 0.612573] pci 0000:00:05.0: [8086:6f28] type 00 class 0x088000 [ 0.613149] pci 0000:00:05.1: [8086:6f29] type 00 class 0x088000 [ 0.613780] pci 0000:00:05.2: [8086:6f2a] type 00 class 0x088000 [ 0.614454] pci 0000:00:14.0: [8086:8c31] type 00 class 0x0c0330 [ 0.614672] pci 0000:00:14.0: reg 0x10: [mem 0xfb600000-0xfb60ffff 64bit] [ 0.615133] pci 0000:00:14.0: PME# supported from D3hot D3cold [ 0.615480] pci 0000:00:16.0: [8086:8c3a] type 00 class 0x078000 [ 0.615698] pci 0000:00:16.0: reg 0x10: [mem 0xfb617000-0xfb61700f 64bit] [ 0.616171] pci 0000:00:16.0: PME# supported from D0 D3hot D3cold [ 0.616473] pci 0000:00:16.1: [8086:8c3b] type 00 class 0x078000 [ 0.616691] pci 0000:00:16.1: reg 0x10: [mem 0xfb616000-0xfb61600f 64bit] [ 0.617155] pci 0000:00:16.1: PME# supported from D0 D3hot D3cold [ 0.617512] pci 0000:00:1a.0: [8086:8c2d] type 00 class 0x0c0320 [ 0.617710] pci 0000:00:1a.0: reg 0x10: [mem 0xfb614000-0xfb6143ff] [ 0.618245] pci 0000:00:1a.0: PME# supported from D0 D3hot D3cold [ 0.618594] pci 0000:00:1c.0: [8086:8c10] type 01 class 0x060400 [ 0.619140] pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold [ 0.619341] pci 0000:00:1c.0: Enabling MPC IRBNCE [ 0.619463] pci 0000:00:1c.0: Intel PCH root port ACS workaround enabled [ 0.627189] pci 0000:00:1c.1: [8086:8c12] type 01 class 0x060400 [ 0.627745] pci 0000:00:1c.1: PME# supported from D0 D3hot D3cold [ 0.627940] pci 0000:00:1c.1: Enabling MPC IRBNCE [ 0.628027] pci 0000:00:1c.1: Intel PCH root port ACS workaround enabled [ 0.628319] pci 0000:00:1c.3: [8086:8c16] type 01 class 0x060400 [ 0.628874] pci 0000:00:1c.3: PME# supported from D0 D3hot D3cold [ 0.629072] pci 0000:00:1c.3: Enabling MPC IRBNCE [ 0.629194] pci 0000:00:1c.3: Intel PCH root port ACS workaround enabled [ 0.629484] pci 0000:00:1c.4: [8086:8c18] type 01 class 0x060400 [ 0.630038] pci 0000:00:1c.4: PME# supported from D0 D3hot D3cold [ 0.630233] pci 0000:00:1c.4: Enabling MPC IRBNCE [ 0.630354] pci 0000:00:1c.4: Intel PCH root port ACS workaround enabled [ 0.630678] pci 0000:00:1d.0: [8086:8c26] type 00 class 0x0c0320 [ 0.630883] pci 0000:00:1d.0: reg 0x10: [mem 0xfb613000-0xfb6133ff] [ 0.631421] pci 0000:00:1d.0: PME# supported from D0 D3hot D3cold [ 0.631742] pci 0000:00:1f.0: [8086:8c54] type 00 class 0x060100 [ 0.632501] pci 0000:00:1f.2: [8086:8c02] type 00 class 0x010601 [ 0.632696] pci 0000:00:1f.2: reg 0x10: [io 0xf070-0xf077] [ 0.632854] pci 0000:00:1f.2: reg 0x14: [io 0xf060-0xf063] [ 0.633012] pci 0000:00:1f.2: reg 0x18: [io 0xf050-0xf057] [ 0.633012] pci 0000:00:1f.2: reg 0x1c: [io 0xf040-0xf043] [ 0.633012] pci 0000:00:1f.2: reg 0x20: [io 0xf020-0xf03f] [ 0.633012] pci 0000:00:1f.2: reg 0x24: [mem 0xfb612000-0xfb6127ff] [ 0.633012] pci 0000:00:1f.2: PME# supported from D3hot [ 0.633013] pci 0000:00:1f.3: [8086:8c22] type 00 class 0x0c0500 [ 0.633013] pci 0000:00:1f.3: reg 0x10: [mem 0xfb611000-0xfb6110ff 64bit] [ 0.633013] pci 0000:00:1f.3: reg 0x20: [io 0xf000-0xf01f] [ 0.633013] pci 0000:00:1f.6: [8086:8c24] type 00 class 0x118000 [ 0.634117] pci 0000:00:1f.6: reg 0x10: [mem 0xfb610000-0xfb610fff 64bit] [ 0.634831] pci 0000:00:01.0: PCI bridge to [bus 01] [ 0.635121] pci 0000:00:01.1: PCI bridge to [bus 02] [ 0.635461] pci 0000:03:00.0: [8086:6f50] type 00 class 0x088000 [ 0.635673] pci 0000:03:00.0: reg 0x10: [mem 0xfb506000-0xfb507fff 64bit] [ 0.636424] pci 0000:03:00.1: [8086:6f51] type 00 class 0x088000 [ 0.636639] pci 0000:03:00.1: reg 0x10: [mem 0xfb504000-0xfb505fff 64bit] [ 0.637351] pci 0000:03:00.2: [8086:6f52] type 00 class 0x088000 [ 0.637564] pci 0000:03:00.2: reg 0x10: [mem 0xfb502000-0xfb503fff 64bit] [ 0.638273] pci 0000:03:00.3: [8086:6f53] type 00 class 0x088000 [ 0.638486] pci 0000:03:00.3: reg 0x10: [mem 0xfb500000-0xfb501fff 64bit] [ 0.639187] pci 0000:00:02.0: PCI bridge to [bus 03] [ 0.639326] pci 0000:00:02.0: bridge window [mem 0xfb500000-0xfb5fffff] [ 0.639666] pci 0000:04:00.0: [8086:15ac] type 00 class 0x020000 [ 0.639879] pci 0000:04:00.0: reg 0x10: [mem 0xfbc00000-0xfbdfffff 64bit pref] [ 0.640159] pci 0000:04:00.0: reg 0x20: [mem 0xfbe04000-0xfbe07fff 64bit pref] [ 0.640344] pci 0000:04:00.0: reg 0x30: [mem 0xfb480000-0xfb4fffff pref] [ 0.640694] pci 0000:04:00.0: PME# supported from D0 D3hot D3cold [ 0.640916] pci 0000:04:00.0: reg 0x184: [mem 0x00000000-0x00003fff 64bit] [ 0.641018] pci 0000:04:00.0: VF(n) BAR0 space: [mem 0x00000000-0x000fffff 64bit] (contains BAR0 for 64 VFs) [ 0.641223] pci 0000:04:00.0: reg 0x190: [mem 0x00000000-0x00003fff 64bit] [ 0.641344] pci 0000:04:00.0: VF(n) BAR3 space: [mem 0x00000000-0x000fffff 64bit] (contains BAR3 for 64 VFs) [ 0.641918] pci 0000:04:00.1: [8086:15ac] type 00 class 0x020000 [ 0.642111] pci 0000:04:00.1: reg 0x10: [mem 0xfba00000-0xfbbfffff 64bit pref] [ 0.642399] pci 0000:04:00.1: reg 0x20: [mem 0xfbe00000-0xfbe03fff 64bit pref] [ 0.642584] pci 0000:04:00.1: reg 0x30: [mem 0xfb400000-0xfb47ffff pref] [ 0.642933] pci 0000:04:00.1: PME# supported from D0 D3hot D3cold [ 0.643102] pci 0000:04:00.1: reg 0x184: [mem 0x00000000-0x00003fff 64bit] [ 0.643224] pci 0000:04:00.1: VF(n) BAR0 space: [mem 0x00000000-0x000fffff 64bit] (contains BAR0 for 64 VFs) [ 0.643435] pci 0000:04:00.1: reg 0x190: [mem 0x00000000-0x00003fff 64bit] [ 0.643556] pci 0000:04:00.1: VF(n) BAR3 space: [mem 0x00000000-0x000fffff 64bit] (contains BAR3 for 64 VFs) [ 0.644100] pci 0000:00:02.2: PCI bridge to [bus 04] [ 0.644235] pci 0000:00:02.2: bridge window [mem 0xfb400000-0xfb4fffff] [ 0.644374] pci 0000:00:02.2: bridge window [mem 0xfba00000-0xfbefffff 64bit pref] [ 0.644665] pci 0000:00:03.0: PCI bridge to [bus 05] [ 0.644963] pci 0000:00:03.2: PCI bridge to [bus 06] [ 0.645266] pci 0000:07:00.0: working around ROM BAR overlap defect [ 0.645387] pci 0000:07:00.0: [8086:1533] type 00 class 0x020000 [ 0.645593] pci 0000:07:00.0: reg 0x10: [mem 0xfb300000-0xfb37ffff] [ 0.645810] pci 0000:07:00.0: reg 0x18: [io 0xe000-0xe01f] [ 0.645976] pci 0000:07:00.0: reg 0x1c: [mem 0xfb380000-0xfb383fff] [ 0.646429] pci 0000:07:00.0: PME# supported from D0 D3hot D3cold [ 0.646891] pci 0000:00:1c.0: PCI bridge to [bus 07] [ 0.647018] pci 0000:00:1c.0: bridge window [io 0xe000-0xefff] [ 0.647147] pci 0000:00:1c.0: bridge window [mem 0xfb300000-0xfb3fffff] [ 0.647504] pci 0000:08:00.0: working around ROM BAR overlap defect [ 0.647624] pci 0000:08:00.0: [8086:1533] type 00 class 0x020000 [ 0.647831] pci 0000:08:00.0: reg 0x10: [mem 0xfb200000-0xfb27ffff] [ 0.648047] pci 0000:08:00.0: reg 0x18: [io 0xd000-0xd01f] [ 0.648212] pci 0000:08:00.0: reg 0x1c: [mem 0xfb280000-0xfb283fff] [ 0.648757] pci 0000:08:00.0: PME# supported from D0 D3hot D3cold [ 0.649220] pci 0000:00:1c.1: PCI bridge to [bus 08] [ 0.649347] pci 0000:00:1c.1: bridge window [io 0xd000-0xdfff] [ 0.649475] pci 0000:00:1c.1: bridge window [mem 0xfb200000-0xfb2fffff] [ 0.649814] pci 0000:09:00.0: [1a03:1150] type 01 class 0x060400 [ 0.650212] pci 0000:09:00.0: enabling Extended Tags [ 0.650553] pci 0000:09:00.0: supports D1 D2 [ 0.650666] pci 0000:09:00.0: PME# supported from D0 D1 D2 D3hot D3cold [ 0.651025] pci 0000:00:1c.3: PCI bridge to [bus 09-0a] [ 0.651152] pci 0000:00:1c.3: bridge window [io 0xc000-0xcfff] [ 0.651281] pci 0000:00:1c.3: bridge window [mem 0xfa000000-0xfb0fffff] [ 0.651587] pci_bus 0000:0a: extended config space not accessible [ 0.651759] pci 0000:0a:00.0: [1a03:2000] type 00 class 0x030000 [ 0.651968] pci 0000:0a:00.0: reg 0x10: [mem 0xfa000000-0xfaffffff] [ 0.652066] pci 0000:0a:00.0: reg 0x14: [mem 0xfb000000-0xfb01ffff] [ 0.652233] pci 0000:0a:00.0: reg 0x18: [io 0xc000-0xc07f] [ 0.652587] pci 0000:0a:00.0: Video device with shadowed ROM at [mem 0x000c0000-0x000dffff] [ 0.652879] pci 0000:0a:00.0: supports D1 D2 [ 0.652993] pci 0000:0a:00.0: PME# supported from D0 D1 D2 D3hot D3cold [ 0.653335] pci 0000:09:00.0: PCI bridge to [bus 0a] [ 0.653474] pci 0000:09:00.0: bridge window [io 0xc000-0xcfff] [ 0.653604] pci 0000:09:00.0: bridge window [mem 0xfa000000-0xfb0fffff] [ 0.653991] pci 0000:0b:00.0: [8086:1521] type 00 class 0x020000 [ 0.654099] pci 0000:0b:00.0: reg 0x10: [mem 0xfb160000-0xfb17ffff] [ 0.654309] pci 0000:0b:00.0: reg 0x18: [io 0xb060-0xb07f] [ 0.654471] pci 0000:0b:00.0: reg 0x1c: [mem 0xfb18c000-0xfb18ffff] [ 0.654986] pci 0000:0b:00.0: PME# supported from D0 D3hot D3cold [ 0.655133] pci 0000:0b:00.0: reg 0x184: [mem 0x00000000-0x00003fff 64bit pref] [ 0.655284] pci 0000:0b:00.0: VF(n) BAR0 space: [mem 0x00000000-0x0001ffff 64bit pref] (contains BAR0 for 8 VFs) [ 0.655503] pci 0000:0b:00.0: reg 0x190: [mem 0x00000000-0x00003fff 64bit pref] [ 0.655647] pci 0000:0b:00.0: VF(n) BAR3 space: [mem 0x00000000-0x0001ffff 64bit pref] (contains BAR3 for 8 VFs) [ 0.656211] pci 0000:0b:00.1: [8086:1521] type 00 class 0x020000 [ 0.656413] pci 0000:0b:00.1: reg 0x10: [mem 0xfb140000-0xfb15ffff] [ 0.656626] pci 0000:0b:00.1: reg 0x18: [io 0xb040-0xb05f] [ 0.656788] pci 0000:0b:00.1: reg 0x1c: [mem 0xfb188000-0xfb18bfff] [ 0.657302] pci 0000:0b:00.1: PME# supported from D0 D3hot D3cold [ 0.657531] pci 0000:0b:00.1: reg 0x184: [mem 0x00000000-0x00003fff 64bit pref] [ 0.657676] pci 0000:0b:00.1: VF(n) BAR0 space: [mem 0x00000000-0x0001ffff 64bit pref] (contains BAR0 for 8 VFs) [ 0.657894] pci 0000:0b:00.1: reg 0x190: [mem 0x00000000-0x00003fff 64bit pref] [ 0.658018] pci 0000:0b:00.1: VF(n) BAR3 space: [mem 0x00000000-0x0001ffff 64bit pref] (contains BAR3 for 8 VFs) [ 0.658541] pci 0000:0b:00.2: [8086:1521] type 00 class 0x020000 [ 0.658742] pci 0000:0b:00.2: reg 0x10: [mem 0xfb120000-0xfb13ffff] [ 0.658952] pci 0000:0b:00.2: reg 0x18: [io 0xb020-0xb03f] [ 0.659063] pci 0000:0b:00.2: reg 0x1c: [mem 0xfb184000-0xfb187fff] [ 0.659579] pci 0000:0b:00.2: PME# supported from D0 D3hot D3cold [ 0.659808] pci 0000:0b:00.2: reg 0x184: [mem 0x00000000-0x00003fff 64bit pref] [ 0.659954] pci 0000:0b:00.2: VF(n) BAR0 space: [mem 0x00000000-0x0001ffff 64bit pref] (contains BAR0 for 8 VFs) [ 0.660082] pci 0000:0b:00.2: reg 0x190: [mem 0x00000000-0x00003fff 64bit pref] [ 0.660227] pci 0000:0b:00.2: VF(n) BAR3 space: [mem 0x00000000-0x0001ffff 64bit pref] (contains BAR3 for 8 VFs) [ 0.660766] pci 0000:0b:00.3: [8086:1521] type 00 class 0x020000 [ 0.660967] pci 0000:0b:00.3: reg 0x10: [mem 0xfb100000-0xfb11ffff] [ 0.661108] pci 0000:0b:00.3: reg 0x18: [io 0xb000-0xb01f] [ 0.661274] pci 0000:0b:00.3: reg 0x1c: [mem 0xfb180000-0xfb183fff] [ 0.661785] pci 0000:0b:00.3: PME# supported from D0 D3hot D3cold [ 0.662018] pci 0000:0b:00.3: reg 0x184: [mem 0x00000000-0x00003fff 64bit pref] [ 0.662163] pci 0000:0b:00.3: VF(n) BAR0 space: [mem 0x00000000-0x0001ffff 64bit pref] (contains BAR0 for 8 VFs) [ 0.662381] pci 0000:0b:00.3: reg 0x190: [mem 0x00000000-0x00003fff 64bit pref] [ 0.662526] pci 0000:0b:00.3: VF(n) BAR3 space: [mem 0x00000000-0x0001ffff 64bit pref] (contains BAR3 for 8 VFs) [ 0.663113] pci 0000:00:1c.4: PCI bridge to [bus 0b] [ 0.663241] pci 0000:00:1c.4: bridge window [io 0xb000-0xbfff] [ 0.663389] pci 0000:00:1c.4: bridge window [mem 0xfb100000-0xfb1fffff] [ 0.663529] pci 0000:00:1c.4: bridge has subordinate 0b but max busn 0c [ 0.663998] pci_bus 0000:00: on NUMA node 0 [ 0.664098] xen: registering gsi 13 triggering 1 polarity 0 [ 0.665066] ACPI: PCI: Interrupt link LNKA configured for IRQ 11 [ 0.665263] ACPI: PCI: Interrupt link LNKB configured for IRQ 10 [ 0.665453] ACPI: PCI: Interrupt link LNKC configured for IRQ 5 [ 0.665645] ACPI: PCI: Interrupt link LNKD configured for IRQ 11 [ 0.665835] ACPI: PCI: Interrupt link LNKE configured for IRQ 0 [ 0.665953] ACPI: PCI: Interrupt link LNKE disabled [ 0.666091] ACPI: PCI: Interrupt link LNKF configured for IRQ 0 [ 0.666210] ACPI: PCI: Interrupt link LNKF disabled [ 0.666395] ACPI: PCI: Interrupt link LNKG configured for IRQ 0 [ 0.666514] ACPI: PCI: Interrupt link LNKG disabled [ 0.666699] ACPI: PCI: Interrupt link LNKH configured for IRQ 0 [ 0.666817] ACPI: PCI: Interrupt link LNKH disabled [ 0.667082] xen:balloon: Initialising balloon driver [ 0.668107] iommu: Default domain type: Translated [ 0.675022] iommu: DMA domain TLB invalidation policy: lazy mode [ 0.675206] SCSI subsystem initialized [ 0.675334] libata version 3.00 loaded. [ 0.675334] ACPI: bus type USB registered [ 0.675334] usbcore: registered new interface driver usbfs [ 0.675334] usbcore: registered new interface driver hub [ 0.675442] usbcore: registered new device driver usb [ 0.675569] pps_core: LinuxPPS API ver. 1 registered [ 0.676018] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti [ 0.676170] PTP clock support registered [ 0.676306] Advanced Linux Sound Architecture Driver Initialized. [ 0.676310] NetLabel: Initializing [ 0.676422] NetLabel: domain hash size = 128 [ 0.676535] NetLabel: protocols = UNLABELED CIPSOv4 CALIPSO [ 0.677028] NetLabel: unlabeled traffic allowed by default [ 0.677168] PCI: Using ACPI for IRQ routing [ 0.712579] PCI: pci_cache_line_size set to 64 bytes [ 0.713358] e820: reserve RAM buffer [mem 0x0009a000-0x0009ffff] [ 0.713360] e820: reserve RAM buffer [mem 0x20066000-0x23ffffff] [ 0.713383] pci 0000:0a:00.0: vgaarb: setting as boot VGA device [ 0.713383] pci 0000:0a:00.0: vgaarb: bridge control possible [ 0.713383] pci 0000:0a:00.0: vgaarb: VGA device added: decodes=io+mem,owns=io+mem,locks=none [ 0.713445] vgaarb: loaded [ 0.715659] clocksource: Switched to clocksource tsc-early [ 0.716051] VFS: Disk quotas dquot_6.6.0 [ 0.716051] VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes) [ 0.716527] hugetlbfs: disabling because there are no supported hugepage sizes [ 0.716685] pnp: PnP ACPI init [ 0.717174] xen: registering gsi 8 triggering 1 polarity 0 [ 0.717369] system 00:01: [io 0x0500-0x057f] has been reserved [ 0.717496] system 00:01: [io 0x0400-0x047f] has been reserved [ 0.717619] system 00:01: [io 0x0580-0x059f] has been reserved [ 0.717754] system 00:01: [io 0x0600-0x061f] has been reserved [ 0.717873] system 00:01: [io 0x0880-0x0883] has been reserved [ 0.717991] system 00:01: [io 0x0800-0x081f] has been reserved [ 0.718136] system 00:01: [mem 0xfed1c000-0xfed3ffff] could not be reserved [ 0.718260] system 00:01: [mem 0xfed45000-0xfed8bfff] has been reserved [ 0.718381] system 00:01: [mem 0xff000000-0xffffffff] has been reserved [ 0.718502] system 00:01: [mem 0xfee00000-0xfeefffff] has been reserved [ 0.718622] system 00:01: [mem 0xfed12000-0xfed1200f] has been reserved [ 0.718743] system 00:01: [mem 0xfed12010-0xfed1201f] has been reserved [ 0.718863] system 00:01: [mem 0xfed1b000-0xfed1bfff] has been reserved [ 0.719301] system 00:02: [io 0x0a00-0x0a0f] has been reserved [ 0.719426] system 00:02: [io 0x0a10-0x0a1f] has been reserved [ 0.719545] system 00:02: [io 0x0a20-0x0a2f] has been reserved [ 0.719664] system 00:02: [io 0x0a30-0x0a3f] has been reserved [ 0.719782] system 00:02: [io 0x0a40-0x0a4f] has been reserved [ 0.720232] xen: registering gsi 4 triggering 1 polarity 0 [ 0.720238] Already setup the GSI :4 [ 0.720352] pnp 00:03: [dma 0 disabled] [ 0.720669] xen: registering gsi 3 triggering 1 polarity 0 [ 0.720681] pnp 00:04: [dma 0 disabled] [ 0.721299] pnp: PnP ACPI: found 5 devices [ 0.752666] PM-Timer failed consistency check (0xffffff) - aborting. [ 0.752860] NET: Registered PF_INET protocol family [ 0.753036] IP idents hash table entries: 8192 (order: 4, 65536 bytes, linear) [ 0.753423] tcp_listen_portaddr_hash hash table entries: 256 (order: 0, 4096 bytes, linear) [ 0.753576] Table-perturb hash table entries: 65536 (order: 6, 262144 bytes, linear) [ 0.753731] TCP established hash table entries: 4096 (order: 3, 32768 bytes, linear) [ 0.753882] TCP bind hash table entries: 4096 (order: 5, 131072 bytes, linear) [ 0.754076] TCP: Hash tables configured (established 4096 bind 4096) [ 0.754256] UDP hash table entries: 256 (order: 1, 8192 bytes, linear) [ 0.754406] UDP-Lite hash table entries: 256 (order: 1, 8192 bytes, linear) [ 0.754559] NET: Registered PF_UNIX/PF_LOCAL protocol family [ 0.754989] RPC: Registered named UNIX socket transport module. [ 0.755147] RPC: Registered udp transport module. [ 0.755261] RPC: Registered tcp transport module. [ 0.755375] RPC: Registered tcp NFSv4.1 backchannel transport module. [ 0.755919] pci 0000:00:1c.4: bridge window [mem 0x00100000-0x000fffff 64bit pref] to [bus 0b] add_size 100000 add_align 100000 [ 0.756107] clipped [mem size 0x00000000 64bit pref] to [mem size 0xfffffffffffa0000 64bit pref] for e820 entry [mem 0x0009ac00-0x000fffff] [ 0.756272] clipped [mem size 0x00020000 64bit pref] to [mem size 0xfffffffffffc0000 64bit pref] for e820 entry [mem 0x0009ac00-0x000fffff] [ 0.756434] pci 0000:00:1c.4: BAR 15: assigned [mem 0x90000000-0x900fffff 64bit pref] [ 0.756615] pci 0000:00:01.0: PCI bridge to [bus 01] [ 0.756790] pci 0000:00:01.1: PCI bridge to [bus 02] [ 0.756964] pci 0000:00:02.0: PCI bridge to [bus 03] [ 0.757121] pci 0000:00:02.0: bridge window [mem 0xfb500000-0xfb5fffff] [ 0.757288] pci 0000:04:00.0: BAR 7: no space for [mem size 0x00100000 64bit] [ 0.757412] pci 0000:04:00.0: BAR 7: failed to assign [mem size 0x00100000 64bit] [ 0.757557] pci 0000:04:00.0: BAR 10: no space for [mem size 0x00100000 64bit] [ 0.757701] pci 0000:04:00.0: BAR 10: failed to assign [mem size 0x00100000 64bit] [ 0.757851] pci 0000:04:00.1: BAR 7: no space for [mem size 0x00100000 64bit] [ 0.757990] pci 0000:04:00.1: BAR 7: failed to assign [mem size 0x00100000 64bit] [ 0.758157] pci 0000:04:00.1: BAR 10: no space for [mem size 0x00100000 64bit] [ 0.758303] pci 0000:04:00.1: BAR 10: failed to assign [mem size 0x00100000 64bit] [ 0.758449] pci 0000:04:00.0: BAR 7: no space for [mem size 0x00100000 64bit] [ 0.758572] pci 0000:04:00.0: BAR 7: failed to assign [mem size 0x00100000 64bit] [ 0.758717] pci 0000:04:00.0: BAR 10: no space for [mem size 0x00100000 64bit] [ 0.758861] pci 0000:04:00.0: BAR 10: failed to assign [mem size 0x00100000 64bit] [ 0.759006] pci 0000:04:00.1: BAR 7: no space for [mem size 0x00100000 64bit] [ 0.759148] pci 0000:04:00.1: BAR 7: failed to assign [mem size 0x00100000 64bit] [ 0.759300] pci 0000:04:00.1: BAR 10: no space for [mem size 0x00100000 64bit] [ 0.759444] pci 0000:04:00.1: BAR 10: failed to assign [mem size 0x00100000 64bit] [ 0.759591] pci 0000:00:02.2: PCI bridge to [bus 04] [ 0.759726] pci 0000:00:02.2: bridge window [mem 0xfb400000-0xfb4fffff] [ 0.759859] pci 0000:00:02.2: bridge window [mem 0xfba00000-0xfbefffff 64bit pref] [ 0.760045] pci 0000:00:03.0: PCI bridge to [bus 05] [ 0.760234] pci 0000:00:03.2: PCI bridge to [bus 06] [ 0.760410] pci 0000:00:1c.0: PCI bridge to [bus 07] [ 0.760530] pci 0000:00:1c.0: bridge window [io 0xe000-0xefff] [ 0.760678] pci 0000:00:1c.0: bridge window [mem 0xfb300000-0xfb3fffff] [ 0.760840] pci 0000:00:1c.1: PCI bridge to [bus 08] [ 0.760959] pci 0000:00:1c.1: bridge window [io 0xd000-0xdfff] [ 0.761125] pci 0000:00:1c.1: bridge window [mem 0xfb200000-0xfb2fffff] [ 0.761290] pci 0000:09:00.0: PCI bridge to [bus 0a] [ 0.761411] pci 0000:09:00.0: bridge window [io 0xc000-0xcfff] [ 0.761552] pci 0000:09:00.0: bridge window [mem 0xfa000000-0xfb0fffff] [ 0.761722] pci 0000:00:1c.3: PCI bridge to [bus 09-0a] [ 0.761843] pci 0000:00:1c.3: bridge window [io 0xc000-0xcfff] [ 0.761982] pci 0000:00:1c.3: bridge window [mem 0xfa000000-0xfb0fffff] [ 0.762216] pci 0000:0b:00.0: BAR 7: assigned [mem 0x90000000-0x9001ffff 64bit pref] [ 0.762376] pci 0000:0b:00.0: BAR 10: assigned [mem 0x90020000-0x9003ffff 64bit pref] [ 0.762530] pci 0000:0b:00.1: BAR 7: assigned [mem 0x90040000-0x9005ffff 64bit pref] [ 0.762683] pci 0000:0b:00.1: BAR 10: assigned [mem 0x90060000-0x9007ffff 64bit pref] [ 0.762836] pci 0000:0b:00.2: BAR 7: assigned [mem 0x90080000-0x9009ffff 64bit pref] [ 0.762989] pci 0000:0b:00.2: BAR 10: assigned [mem 0x900a0000-0x900bffff 64bit pref] [ 0.763169] pci 0000:0b:00.3: BAR 7: assigned [mem 0x900c0000-0x900dffff 64bit pref] [ 0.763324] pci 0000:0b:00.3: BAR 10: assigned [mem 0x900e0000-0x900fffff 64bit pref] [ 0.763484] pci 0000:00:1c.4: PCI bridge to [bus 0b] [ 0.763604] pci 0000:00:1c.4: bridge window [io 0xb000-0xbfff] [ 0.763744] pci 0000:00:1c.4: bridge window [mem 0xfb100000-0xfb1fffff] [ 0.763878] pci 0000:00:1c.4: bridge window [mem 0x90000000-0x900fffff 64bit pref] [ 0.764066] pci_bus 0000:00: Some PCI device resources are unassigned, try booting with pci=realloc [ 0.764231] pci_bus 0000:00: resource 4 [io 0x0000-0x0cf7 window] [ 0.764352] pci_bus 0000:00: resource 5 [io 0x1000-0xffff window] [ 0.764472] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff window] [ 0.764592] pci_bus 0000:00: resource 7 [mem 0x90000000-0xfbffbfff window] [ 0.764714] pci_bus 0000:03: resource 1 [mem 0xfb500000-0xfb5fffff] [ 0.764840] pci_bus 0000:04: resource 1 [mem 0xfb400000-0xfb4fffff] [ 0.764959] pci_bus 0000:04: resource 2 [mem 0xfba00000-0xfbefffff 64bit pref] [ 0.765125] pci_bus 0000:07: resource 0 [io 0xe000-0xefff] [ 0.765244] pci_bus 0000:07: resource 1 [mem 0xfb300000-0xfb3fffff] [ 0.765363] pci_bus 0000:08: resource 0 [io 0xd000-0xdfff] [ 0.765479] pci_bus 0000:08: resource 1 [mem 0xfb200000-0xfb2fffff] [ 0.765599] pci_bus 0000:09: resource 0 [io 0xc000-0xcfff] [ 0.765715] pci_bus 0000:09: resource 1 [mem 0xfa000000-0xfb0fffff] [ 0.765834] pci_bus 0000:0a: resource 0 [io 0xc000-0xcfff] [ 0.765950] pci_bus 0000:0a: resource 1 [mem 0xfa000000-0xfb0fffff] [ 0.766092] pci_bus 0000:0b: resource 0 [io 0xb000-0xbfff] [ 0.766221] pci_bus 0000:0b: resource 1 [mem 0xfb100000-0xfb1fffff] [ 0.766340] pci_bus 0000:0b: resource 2 [mem 0x90000000-0x900fffff 64bit pref] [ 0.766884] pci 0000:00:05.0: disabled boot interrupts on device [8086:6f28] [ 0.767134] xen: registering gsi 19 triggering 0 polarity 1 [ 0.767164] xen: --> pirq=19 -> irq=19 (gsi=19) [ 0.775948] xen: registering gsi 18 triggering 0 polarity 1 [ 0.775968] xen: --> pirq=18 -> irq=18 (gsi=18) [ 0.792446] pci 0000:00:1a.0: quirk_usb_early_handoff+0x0/0x720 took 16163 usecs [ 0.792691] xen: registering gsi 18 triggering 0 polarity 1 [ 0.792697] Already setup the GSI :18 [ 0.810155] pci 0000:00:1d.0: quirk_usb_early_handoff+0x0/0x720 took 17108 usecs [ 0.810370] pci 0000:04:00.0: CLS mismatch (64 != 32), using 64 bytes [ 0.810512] PCI-DMA: Using software bounce buffering for IO (SWIOTLB) [ 0.810587] Unpacking initramfs... [ 0.810631] software IO TLB: mapped [mem 0x000000001b180000-0x000000001f180000] (64MB) [ 0.810963] kvm: no hardware support for 'kvm_intel' [ 0.818759] has_svm: not amd or hygon [ 0.818874] kvm: no hardware support for 'kvm_amd' [ 0.818991] clocksource: tsc: mask: 0xffffffffffffffff max_cycles: 0x1fb62f12e8c, max_idle_ns: 440795238402 ns [ 0.819249] clocksource: Switched to clocksource tsc [ 0.822295] Initialise system trusted keyrings [ 0.822647] workingset: timestamp_bits=62 max_order=17 bucket_order=0 [ 0.824112] NFS: Registering the id_resolver key type [ 0.824238] Key type id_resolver registered [ 0.824350] Key type id_legacy registered [ 0.824548] 9p: Installing v9fs 9p2000 file system support [ 0.838430] Key type asymmetric registered [ 0.838557] Asymmetric key parser 'x509' registered [ 0.838702] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 251) [ 0.838858] io scheduler mq-deadline registered [ 0.838972] io scheduler kyber registered [ 0.840004] xen: registering gsi 16 triggering 0 polarity 1 [ 0.840036] xen: --> pirq=16 -> irq=16 (gsi=16) [ 0.840568] xen: registering gsi 16 triggering 0 polarity 1 [ 0.840574] Already setup the GSI :16 [ 0.841210] xen: registering gsi 16 triggering 0 polarity 1 [ 0.841215] Already setup the GSI :16 [ 0.841539] xen: registering gsi 16 triggering 0 polarity 1 [ 0.841543] Already setup the GSI :16 [ 0.841878] xen: registering gsi 16 triggering 0 polarity 1 [ 0.841882] Already setup the GSI :16 [ 0.842487] xen: registering gsi 16 triggering 0 polarity 1 [ 0.842492] Already setup the GSI :16 [ 0.843099] xen: registering gsi 16 triggering 0 polarity 1 [ 0.843104] Already setup the GSI :16 [ 0.843545] xen: registering gsi 17 triggering 0 polarity 1 [ 0.843562] xen: --> pirq=17 -> irq=17 (gsi=17) [ 0.843909] xen: registering gsi 19 triggering 0 polarity 1 [ 0.843914] Already setup the GSI :19 [ 0.844353] xen: registering gsi 16 triggering 0 polarity 1 [ 0.844357] Already setup the GSI :16 [ 0.845040] input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input0 [ 0.845216] ACPI: button: Power Button [PWRB] [ 0.845358] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input1 [ 0.845743] ACPI: button: Power Button [PWRF] [ 0.846098] Monitor-Mwait will be used to enter C-1 state [ 0.846130] Monitor-Mwait will be used to enter C-2 state [ 0.846145] ACPI: \_SB_.SCK0.CP00: Found 2 idle states [ 0.846506] ACPI: \_SB_.SCK0.CP01: Found 2 idle states [ 0.846862] ACPI: \_SB_.SCK0.CP02: Found 2 idle states [ 0.847367] ACPI: \_SB_.SCK0.CP03: Found 2 idle states [ 0.847874] ACPI: \_SB_.SCK0.CP04: Found 2 idle states [ 0.848364] ACPI: \_SB_.SCK0.CP05: Found 2 idle states [ 0.848845] ACPI: \_SB_.SCK0.CP06: Found 2 idle states [ 0.849229] ACPI: \_SB_.SCK0.CP07: Found 2 idle states [ 0.850040] xen:xen_evtchn: Event-channel device installed [ 0.850273] xen_pciback: backend is vpci [ 0.851008] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled [ 0.851318] 00:04: ttyS1 at I/O 0x2f8 (irq = 3, base_baud = 115200) is a 16550A [ 0.852036] hpet_acpi_add: no address or irqs in _CRS [ 0.852246] Non-volatile memory driver v1.3 [ 0.852360] AMD-Vi: AMD IOMMUv2 functionality not available on this system - This is not a bug. [ 0.855064] loop: module loaded [ 0.861695] ahci 0000:00:1f.2: version 3.0 [ 0.861795] xen: registering gsi 16 triggering 0 polarity 1 [ 0.861804] Already setup the GSI :16 [ 0.862130] ahci 0000:00:1f.2: AHCI 0001.0300 32 slots 6 ports 6 Gbps 0x3f impl SATA mode [ 0.862281] ahci 0000:00:1f.2: flags: 64bit ncq led clo pio ems apst [ 0.878270] scsi host0: ahci [ 0.878624] scsi host1: ahci [ 0.878957] scsi host2: ahci [ 0.879285] scsi host3: ahci [ 0.879594] scsi host4: ahci [ 0.879930] scsi host5: ahci [ 0.880073] ata1: SATA max UDMA/133 abar m2048@0xfb612000 port 0xfb612100 irq 74 [ 0.880220] ata2: SATA max UDMA/133 abar m2048@0xfb612000 port 0xfb612180 irq 74 [ 0.880365] ata3: SATA max UDMA/133 abar m2048@0xfb612000 port 0xfb612200 irq 74 [ 0.880510] ata4: SATA max UDMA/133 abar m2048@0xfb612000 port 0xfb612280 irq 74 [ 0.880699] ata5: SATA max UDMA/133 abar m2048@0xfb612000 port 0xfb612300 irq 74 [ 0.880844] ata6: SATA max UDMA/133 abar m2048@0xfb612000 port 0xfb612380 irq 74 [ 0.881273] tun: Universal TUN/TAP device driver, 1.6 [ 0.881512] e100: Intel(R) PRO/100 Network Driver [ 0.881640] e100: Copyright(c) 1999-2006 Intel Corporation [ 0.881778] sky2: driver version 1.30 [ 0.881962] xen_netfront: Initialising Xen virtual ethernet driver [ 0.882382] xen: registering gsi 18 triggering 0 polarity 1 [ 0.882391] Already setup the GSI :18 [ 0.882597] ehci-pci 0000:00:1a.0: EHCI Host Controller [ 0.882797] ehci-pci 0000:00:1a.0: new USB bus registered, assigned bus number 1 [ 0.882973] ehci-pci 0000:00:1a.0: debug port 2 [ 0.887126] ehci-pci 0000:00:1a.0: irq 18, io mem 0xfb614000 [ 0.893664] ehci-pci 0000:00:1a.0: USB 2.0 started, EHCI 1.00 [ 0.893895] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 6.01 [ 0.894044] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 0.894188] usb usb1: Product: EHCI Host Controller [ 0.894303] usb usb1: Manufacturer: Linux 6.1.95+ ehci_hcd [ 0.894420] usb usb1: SerialNumber: 0000:00:1a.0 [ 0.894758] hub 1-0:1.0: USB hub found [ 0.894884] hub 1-0:1.0: 2 ports detected [ 0.895246] xen: registering gsi 18 triggering 0 polarity 1 [ 0.895255] Already setup the GSI :18 [ 0.895446] ehci-pci 0000:00:1d.0: EHCI Host Controller [ 0.895681] ehci-pci 0000:00:1d.0: new USB bus registered, assigned bus number 2 [ 0.895857] ehci-pci 0000:00:1d.0: debug port 2 [ 0.899992] ehci-pci 0000:00:1d.0: irq 18, io mem 0xfb613000 [ 0.906661] ehci-pci 0000:00:1d.0: USB 2.0 started, EHCI 1.00 [ 0.906883] usb usb2: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 6.01 [ 0.907059] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 0.907204] usb usb2: Product: EHCI Host Controller [ 0.907319] usb usb2: Manufacturer: Linux 6.1.95+ ehci_hcd [ 0.907436] usb usb2: SerialNumber: 0000:00:1d.0 [ 0.907718] hub 2-0:1.0: USB hub found [ 0.907843] hub 2-0:1.0: 2 ports detected [ 0.908274] xen: registering gsi 19 triggering 0 polarity 1 [ 0.908283] Already setup the GSI :19 [ 0.908521] xhci_hcd 0000:00:14.0: xHCI Host Controller [ 0.908717] xhci_hcd 0000:00:14.0: new USB bus registered, assigned bus number 3 [ 0.909935] xhci_hcd 0000:00:14.0: hcc params 0x200077c1 hci version 0x100 quirks 0x0000000000009810 [ 0.910397] xhci_hcd 0000:00:14.0: xHCI Host Controller [ 0.910594] xhci_hcd 0000:00:14.0: new USB bus registered, assigned bus number 4 [ 0.910750] xhci_hcd 0000:00:14.0: Host supports USB 3.0 SuperSpeed [ 0.910956] usb usb3: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 6.01 [ 0.911104] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 0.911281] usb usb3: Product: xHCI Host Controller [ 0.911408] usb usb3: Manufacturer: Linux 6.1.95+ xhci-hcd [ 0.911541] usb usb3: SerialNumber: 0000:00:14.0 [ 0.911851] hub 3-0:1.0: USB hub found [ 0.911983] hub 3-0:1.0: 8 ports detected [ 0.913118] usb usb4: New USB device found, idVendor=1d6b, idProduct=0003, bcdDevice= 6.01 [ 0.913270] usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 0.913416] usb usb4: Product: xHCI Host Controller [ 0.913532] usb usb4: Manufacturer: Linux 6.1.95+ xhci-hcd [ 0.913663] usb usb4: SerialNumber: 0000:00:14.0 [ 0.913987] hub 4-0:1.0: USB hub found [ 0.914122] hub 4-0:1.0: 6 ports detected [ 0.915421] usbcore: registered new interface driver usblp [ 0.915568] usbcore: registered new interface driver usb-storage [ 0.915755] Freeing initrd memory: 19884K [ 0.915791] i8042: PNP: No PS/2 controller found. [ 0.916198] rtc_cmos 00:00: RTC can wake from S4 [ 0.916863] rtc_cmos 00:00: registered as rtc0 [ 0.917021] rtc_cmos 00:00: alarms up to one month, y3k, 114 bytes nvram [ 0.917226] device-mapper: uevent: version 1.0.3 [ 0.917335] xen: registering gsi 18 triggering 0 polarity 1 [ 0.917349] Already setup the GSI :18 [ 0.917436] device-mapper: ioctl: 4.47.0-ioctl (2022-07-28) initialised: dm-devel@redhat.com [ 0.917497] i801_smbus 0000:00:1f.3: SPD Write Disable is set [ 0.917632] intel_pstate: CPU model not supported [ 0.917663] i801_smbus 0000:00:1f.3: SMBus using PCI interrupt [ 0.917764] hid: raw HID events driver (C) Jiri Kosina [ 0.918254] usbcore: registered new interface driver usbhid [ 0.918282] i2c i2c-0: 1/4 memory slots populated (from DMI) [ 0.918371] usbhid: USB HID core driver [ 0.918807] Initializing XFRM netlink socket [ 0.919044] NET: Registered PF_INET6 protocol family [ 0.919570] Segment Routing with IPv6 [ 0.919708] In-situ OAM (IOAM) with IPv6 [ 0.919852] sit: IPv6, IPv4 and MPLS over IPv4 tunneling driver [ 0.920086] NET: Registered PF_PACKET protocol family [ 0.920238] 9pnet: Installing 9P2000 support [ 0.920363] Key type dns_resolver registered [ 0.921099] IPI shorthand broadcast: enabled [ 0.921237] sched_clock: Marking stable (883452247, 37609189)->(1767297162, -846235726) [ 0.921822] registered taskstats version 1 [ 0.921939] Loading compiled-in X.509 certificates [ 0.924377] PM: Magic number: 12:204:524 [ 0.924497] usb usb3-port7: hash matches [ 0.924729] printk: console [netcon0] enabled [ 0.924845] netconsole: network logging started [ 0.925187] cfg80211: Loading compiled-in X.509 certificates for regulatory database [ 0.937138] cfg80211: Loaded X.509 cert 'sforshee: 00b28ddf47aef9cea7' [ 0.937478] cfg80211: Loaded X.509 cert 'wens: 61c038651aabdcf94bd0ac7ff06c7248db18c600' [ 0.937729] ALSA device list: [ 0.937858] No soundcards found. [ 0.938159] cfg80211: loaded regulatory.db is malformed or signature is missing/invalid [ 1.135692] usb 1-1: new high-speed USB device number 2 using ehci-pci [ 1.143742] usb 2-1: new high-speed USB device number 2 using ehci-pci [ 1.151708] usb 3-3: new high-speed USB device number 2 using xhci_hcd [ 1.188750] ata2: SATA link down (SStatus 0 SControl 300) [ 1.188930] ata5: SATA link down (SStatus 0 SControl 300) [ 1.189071] ata3: SATA link up 6.0 Gbps (SStatus 133 SControl 300) [ 1.189211] ata4: SATA link down (SStatus 0 SControl 300) [ 1.189364] ata6: SATA link down (SStatus 0 SControl 300) [ 1.189502] ata1: SATA link down (SStatus 0 SControl 300) [ 1.190252] ata3.00: ATA-10: HGST HUS722T1TALA604, RAGNWA05, max UDMA/133 [ 1.264064] usb 1-1: New USB device found, idVendor=8087, idProduct=8008, bcdDevice= 0.05 [ 1.264220] usb 1-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0 [ 1.264611] hub 1-1:1.0: USB hub found [ 1.264811] hub 1-1:1.0: 4 ports detected [ 1.272189] usb 2-1: New USB device found, idVendor=8087, idProduct=8000, bcdDevice= 0.05 [ 1.272345] usb 2-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0 [ 1.272735] hub 2-1:1.0: USB hub found [ 1.272938] hub 2-1:1.0: 4 ports detected [ 1.278890] ata3.00: 1953525168 sectors, multi 16: LBA48 NCQ (depth 32), AA [ 1.279020] ata3.00: Features: NCQ-sndrcv NCQ-prio [ 1.279326] usb 3-3: New USB device found, idVendor=05e3, idProduct=0610, bcdDevice=32.98 [ 1.279482] usb 3-3: New USB device strings: Mfr=0, Product=1, SerialNumber=0 [ 1.279606] usb 3-3: Product: USB2.0 Hub [ 1.280753] hub 3-3:1.0: USB hub found [ 1.281362] hub 3-3:1.0: 4 ports detected [ 1.306818] ata3.00: configured for UDMA/133 [ 1.307352] scsi 2:0:0:0: Direct-Access ATA HGST HUS722T1TAL WA05 PQ: 0 ANSI: 5 [ 1.308284] sd 2:0:0:0: Attached scsi generic sg0 type 0 [ 1.308375] sd 2:0:0:0: [sda] 1953525168 512-byte logical blocks: (1.00 TB/932 GiB) [ 1.308601] sd 2:0:0:0: [sda] Write Protect is off [ 1.308741] sd 2:0:0:0: [sda] Mode Sense: 00 3a 00 00 [ 1.308805] sd 2:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 1.309037] sd 2:0:0:0: [sda] Preferred minimum I/O size 512 bytes [ 1.327991] sda: sda1 sda2 < sda5 > [ 1.328478] sd 2:0:0:0: [sda] Attached SCSI disk [ 1.329722] Freeing unused kernel image (initmem) memory: 1576K [ 1.329852] Write protecting the kernel read-only data: 22528k [ 1.347801] Freeing unused kernel image (text/rodata gap) memory: 2032K [ 1.349052] Freeing unused kernel image (rodata/data gap) memory: 1568K [ 1.397673] usb 3-4: new high-speed USB device number 3 using xhci_hcd [ 1.523934] usb 3-4: New USB device found, idVendor=0557, idProduct=7000, bcdDevice= 0.00 [ 1.524097] usb 3-4: New USB device strings: Mfr=0, Product=0, SerialNumber=0 [ 1.524746] hub 3-4:1.0: USB hub found [ 1.524959] hub 3-4:1.0: 4 ports detected [ 1.587669] usb 3-3.2: new high-speed USB device number 4 using xhci_hcd [ 1.665147] usb 3-3.2: New USB device found, idVendor=05e3, idProduct=0610, bcdDevice=32.98 [ 1.665303] usb 3-3.2: New USB device strings: Mfr=0, Product=1, SerialNumber=0 [ 1.665448] usb 3-3.2: Product: USB2.0 Hub [ 1.666149] hub 3-3.2:1.0: USB hub found [ 1.666630] hub 3-3.2:1.0: 4 ports detected [ 1.810520] x86/mm: Checked W+X mappings: passed, no W+X pages found. [ 1.810656] Run /init as init process [ 1.810767] with arguments: [ 1.810768] /init [ 1.810769] placeholder [ 1.810770] with environment: [ 1.810771] HOME=/ [ 1.810772] TERM=linux [ 1.820682] usb 3-4.1: new low-speed USB device number 5 using xhci_hcd [ 1.925032] usb 3-4.1: New USB device found, idVendor=0557, idProduct=2419, bcdDevice= 1.00 [ 1.925194] usb 3-4.1: New USB device strings: Mfr=0, Product=0, SerialNumber=0 [ 1.931001] input: HID 0557:2419 as /devices/pci0000:00/0000:00:14.0/usb3/3-4/3-4.1/3-4.1:1.0/0003:0557:2419.0001/input/input2 [ 1.982950] hid-generic 0003:0557:2419.0001: input,hidraw0: USB HID v1.00 Keyboard [HID 0557:2419] on usb-0000:00:14.0-4.1/input0 [ 1.985986] input: HID 0557:2419 as /devices/pci0000:00/0000:00:14.0/usb3/3-4/3-4.1/3-4.1:1.1/0003:0557:2419.0002/input/input3 [ 1.986323] hid-generic 0003:0557:2419.0002: input,hidraw1: USB HID v1.00 Mouse [HID 0557:2419] on usb-0000:00:14.0-4.1/input1 [ 2.261170] ixgbe: Intel(R) 10 Gigabit PCI Express Network Driver [ 2.261338] ixgbe: Copyright (c) 1999-2016 Intel Corporation. [ 2.261779] ACPI Warning: \_SB.PCI0.BR2C._PRT: Return Package has no elements (empty) (20220331/nsprepkg-94) [ 2.262071] xen: registering gsi 16 triggering 0 polarity 1 [ 2.262084] Already setup the GSI :16 [ 2.265589] igb: Intel(R) Gigabit Ethernet Network Driver [ 2.265735] igb: Copyright (c) 2007-2014 Intel Corporation. [ 2.265993] xen: registering gsi 16 triggering 0 polarity 1 [ 2.266002] Already setup the GSI :16 [ 2.292348] pps pps0: new PPS source ptp0 [ 2.292531] igb 0000:07:00.0: added PHC on eth0 [ 2.292676] igb 0000:07:00.0: Intel(R) Gigabit Ethernet Network Connection [ 2.292798] igb 0000:07:00.0: eth0: (PCIe:2.5Gb/s:Width x1) 0c:c4:7a:9f:87:be [ 2.292964] igb 0000:07:00.0: eth0: PBA No: 010C00-000 [ 2.293080] igb 0000:07:00.0: Using MSI-X interrupts. 4 rx queue(s), 4 tx queue(s) [ 2.293315] xen: registering gsi 17 triggering 0 polarity 1 [ 2.293324] Already setup the GSI :17 [ 2.322916] pps pps1: new PPS source ptp1 [ 2.323131] igb 0000:08:00.0: added PHC on eth1 [ 2.323265] igb 0000:08:00.0: Intel(R) Gigabit Ethernet Network Connection [ 2.323386] igb 0000:08:00.0: eth1: (PCIe:2.5Gb/s:Width x1) 0c:c4:7a:9f:87:bf [ 2.323552] igb 0000:08:00.0: eth1: PBA No: 010000-000 [ 2.323677] igb 0000:08:00.0: Using MSI-X interrupts. 4 rx queue(s), 4 tx queue(s) [ 2.323913] xen: registering gsi 16 triggering 0 polarity 1 [ 2.323921] Already setup the GSI :16 [ 2.380787] igb 0000:0b:00.0: added PHC on eth2 [ 2.380927] igb 0000:0b:00.0: Intel(R) Gigabit Ethernet Network Connection [ 2.381058] igb 0000:0b:00.0: eth2: (PCIe:5.0Gb/s:Width x4) 0c:c4:7a:9f:87:c0 [ 2.381262] igb 0000:0b:00.0: eth2: PBA No: 010000-000 [ 2.381378] igb 0000:0b:00.0: Using MSI-X interrupts. 8 rx queue(s), 8 tx queue(s) [ 2.381603] xen: registering gsi 17 triggering 0 polarity 1 [ 2.381626] Already setup the GSI :17 [ 2.439327] igb 0000:0b:00.1: added PHC on eth3 [ 2.439466] igb 0000:0b:00.1: Intel(R) Gigabit Ethernet Network Connection [ 2.439588] igb 0000:0b:00.1: eth3: (PCIe:5.0Gb/s:Width x4) 0c:c4:7a:9f:87:c1 [ 2.439808] igb 0000:0b:00.1: eth3: PBA No: 010000-000 [ 2.439925] igb 0000:0b:00.1: Using MSI-X interrupts. 8 rx queue(s), 8 tx queue(s) [ 2.440148] xen: registering gsi 18 triggering 0 polarity 1 [ 2.440156] Already setup the GSI :18 [ 2.497448] igb 0000:0b:00.2: added PHC on eth4 [ 2.497599] igb 0000:0b:00.2: Intel(R) Gigabit Ethernet Network Connection [ 2.497752] igb 0000:0b:00.2: eth4: (PCIe:5.0Gb/s:Width x4) 0c:c4:7a:9f:87:c2 [ 2.497957] igb 0000:0b:00.2: eth4: PBA No: 010000-000 [ 2.498073] igb 0000:0b:00.2: Using MSI-X interrupts. 8 rx queue(s), 8 tx queue(s) [ 2.498319] xen: registering gsi 19 triggering 0 polarity 1 [ 2.498329] Already setup the GSI :19 [ 2.556483] igb 0000:0b:00.3: added PHC on eth5 [ 2.556640] igb 0000:0b:00.3: Intel(R) Gigabit Ethernet Network Connection [ 2.556763] igb 0000:0b:00.3: eth5: (PCIe:5.0Gb/s:Width x4) 0c:c4:7a:9f:87:c3 [ 2.556966] igb 0000:0b:00.3: eth5: PBA No: 010000-000 [ 2.557082] igb 0000:0b:00.3: Using MSI-X interrupts. 8 rx queue(s), 8 tx queue(s) [ 2.559991] igb 0000:07:00.0 enx0cc47a9f87be: renamed from eth0 [ 2.569274] igb 0000:0b:00.0 enx0cc47a9f87c0: renamed from eth2 [ 2.579824] igb 0000:08:00.0 enx0cc47a9f87bf: renamed from eth1 [ 2.588925] igb 0000:0b:00.2 enx0cc47a9f87c2: renamed from eth4 [ 2.600040] igb 0000:0b:00.1 enx0cc47a9f87c1: renamed from eth3 [ 2.607991] igb 0000:0b:00.3 enx0cc47a9f87c3: renamed from eth5 [ 2.998030] ixgbe 0000:04:00.0: Multiqueue Enabled: Rx Queue count = 8, Tx Queue count = 8 XDP Queue count = 0 [ 3.126714] ixgbe 0000:04:00.0: MAC: 5, PHY: 0, PBA No: 020B00-000 [ 3.126945] ixgbe 0000:04:00.0: 0c:c4:7a:9f:8f:b6 [ 3.419322] ixgbe 0000:04:00.0: Intel(R) 10 Gigabit Network Connection [ 3.419759] ACPI Warning: \_SB.PCI0.BR2C._PRT: Return Package has no elements (empty) (20220331/nsprepkg-94) [ 3.419981] xen: registering gsi 17 triggering 0 polarity 1 [ 3.419991] Already setup the GSI :17 [ 4.162088] ixgbe 0000:04:00.1: Multiqueue Enabled: Rx Queue count = 8, Tx Queue count = 8 XDP Queue count = 0 [ 4.292025] ixgbe 0000:04:00.1: MAC: 5, PHY: 0, PBA No: 020B00-000 [ 4.292241] ixgbe 0000:04:00.1: 0c:c4:7a:9f:8f:b7 [ 4.587634] ixgbe 0000:04:00.1: Intel(R) 10 Gigabit Network Connection [ 4.590182] ixgbe 0000:04:00.0 enx0cc47a9f8fb6: renamed from eth0 [ 4.599035] ixgbe 0000:04:00.1 enx0cc47a9f8fb7: renamed from eth1 [ 5.005473] EXT4-fs (dm-0): mounting ext3 file system using the ext4 subsystem [ 5.013220] EXT4-fs (dm-0): mounted filesystem with ordered data mode. Quota mode: none. [ 8.637935] EXT4-fs (dm-0): re-mounted. Quota mode: none. [ 9.572647] EXT4-fs (sda1): mounting ext3 file system using the ext4 subsystem [ 9.598102] EXT4-fs (sda1): mounted filesystem with ordered data mode. Quota mode: none. [ 9.676721] Adding 1949692k swap on /dev/mapper/debina0--vg-swap_1. Priority:-2 extents:1 across:1949692k [ 11.256462] xenbr0: port 1(enx0cc47a9f87be) entered blocking state [ 11.256659] xenbr0: port 1(enx0cc47a9f87be) entered disabled state [ 11.256854] device enx0cc47a9f87be entered promiscuous mode [ 14.804297] igb 0000:07:00.0 enx0cc47a9f87be: igb: enx0cc47a9f87be NIC Link is Up 1000 Mbps Full Duplex, Flow Control: RX [ 14.909964] IPv6: ADDRCONF(NETDEV_CHANGE): enx0cc47a9f87be: link becomes ready [ 14.910196] xenbr0: port 1(enx0cc47a9f87be) entered blocking state [ 14.910319] xenbr0: port 1(enx0cc47a9f87be) entered forwarding state [ 14.910590] IPv6: ADDRCONF(NETDEV_CHANGE): xenbr0: link becomes ready