[ 0.000000] Linux version 6.1.95+ (osstest@himrod0) (gcc (Debian 12.2.0-14) 12.2.0, GNU ld (GNU Binutils for Debian) 2.40) #1 SMP PREEMPT_DYNAMIC Tue Jun 25 08:13:18 UTC 2024 [ 0.000000] Command line: placeholder root=/dev/mapper/italia0--vg-root ro console=hvc0 [ 0.000000] Released 0 page(s) [ 0.000000] BIOS-provided physical RAM map: [ 0.000000] Xen: [mem 0x0000000000000000-0x000000000009afff] usable [ 0.000000] Xen: [mem 0x000000000009bc00-0x00000000000fffff] reserved [ 0.000000] Xen: [mem 0x0000000000100000-0x0000000020064fff] usable [ 0.000000] Xen: [mem 0x00000000ab9ba000-0x00000000bba3afff] ACPI NVS [ 0.000000] Xen: [mem 0x00000000bc60a000-0x00000000bc73ffff] reserved [ 0.000000] Xen: [mem 0x00000000beaee000-0x00000000beaf8fff] reserved [ 0.000000] Xen: [mem 0x00000000beb05000-0x00000000beb15fff] reserved [ 0.000000] Xen: [mem 0x00000000bed3a000-0x00000000beddffff] reserved [ 0.000000] Xen: [mem 0x00000000bede0000-0x00000000befdffff] ACPI NVS [ 0.000000] Xen: [mem 0x00000000befe0000-0x00000000beffefff] ACPI data [ 0.000000] Xen: [mem 0x00000000bf000000-0x00000000bfffffff] reserved [ 0.000000] Xen: [mem 0x00000000f8000000-0x00000000fbffffff] reserved [ 0.000000] Xen: [mem 0x00000000fec00000-0x00000000fec00fff] reserved [ 0.000000] Xen: [mem 0x00000000fed19000-0x00000000fed19fff] reserved [ 0.000000] Xen: [mem 0x00000000fed1c000-0x00000000fed1ffff] reserved [ 0.000000] Xen: [mem 0x00000000fed90000-0x00000000fed90fff] reserved [ 0.000000] Xen: [mem 0x00000000fee00000-0x00000000feefffff] reserved [ 0.000000] Xen: [mem 0x00000000ffa00000-0x00000000ffffffff] reserved [ 0.000000] NX (Execute Disable) protection: active [ 0.000000] SMBIOS 2.6 present. [ 0.000000] DMI: Intel Corporation SandyBridge Platform/To be filled by O.E.M., BIOS S1200BT.86B.02.00.0042.050820141549 05/08/2014 [ 0.000000] Hypervisor detected: Xen PV [ 0.000460] tsc: Detected 3092.974 MHz processor [ 0.000865] e820: update [mem 0x00000000-0x00000fff] usable ==> reserved [ 0.000868] e820: remove [mem 0x000a0000-0x000fffff] usable [ 0.000875] last_pfn = 0x20065 max_arch_pfn = 0x400000000 [ 0.000876] Disabled [ 0.000876] x86/PAT: MTRRs disabled, skipping PAT initialization too. [ 0.000880] x86/PAT: Configuration [0-7]: WB WT UC- UC WC WP UC UC [ 0.000915] Kernel/User page tables isolation: disabled on XEN PV. [ 0.025454] RAMDISK: [mem 0x04000000-0x0536afff] [ 0.025461] ACPI: Early table checksum verification disabled [ 0.035014] ACPI: RSDP 0x00000000000F0410 000024 (v02 INTEL ) [ 0.035025] ACPI: XSDT 0x00000000BEFFDE18 0000BC (v01 INTEL S1200BTS 06222004 INTL 20090903) [ 0.035058] ACPI: FACP 0x00000000BEFFCA98 0000F4 (v04 INTEL S1200BTS 06222004 INTL 20090903) [ 0.035099] ACPI: DSDT 0x00000000BEFEE018 00CE48 (v02 INTEL S1200BTS 00000000 INTL 20100331) [ 0.035115] ACPI: FACS 0x00000000BEFFDD40 000040 [ 0.035131] ACPI: APIC 0x00000000BEFFB018 000652 (v03 INTEL S1200BTS 06222004 INTL 20090903) [ 0.035147] ACPI: SPMI 0x00000000BEFFEC18 000040 (v05 INTEL S1200BTS 06222004 INTL 20090903) [ 0.035164] ACPI: MCFG 0x00000000BEFFEB98 00003C (v01 INTEL S1200BTS 06222004 INTL 20090903) [ 0.035180] ACPI: WDDT 0x00000000BEFFEF18 000040 (v01 INTEL S1200BTS 06222004 INTL 20090903) [ 0.035196] ACPI: HPET 0x00000000BEFFEE98 000038 (v01 INTEL S1200BTS 06222004 INTL 20090903) [ 0.035212] ACPI: SSDT 0x00000000BEFEB018 0010A8 (v02 INTEL S1200BTS 00001000 INTL 20100331) [ 0.035228] ACPI: BOOT 0x00000000BEFFEE18 000028 (v01 INTEL S1200BTS 06222004 INTL 20090903) [ 0.035245] ACPI: SSDT 0x00000000BEFE7698 0005E0 (v02 INTEL S1200BTS 00003000 INTL 20100331) [ 0.035261] ACPI: SSDT 0x00000000BEFE6018 000A92 (v02 INTEL S1200BTS 00003000 INTL 20100331) [ 0.035277] ACPI: SSDT 0x00000000BEFEA598 00054D (v01 INTEL S1200BTS 00001000 INTL 20100331) [ 0.035294] ACPI: SSDT 0x00000000BEFFDB18 000069 (v01 INTEL S1200BTS 00001000 INTL 20100331) [ 0.035310] ACPI: SSDT 0x00000000BEFE9E18 00017B (v02 INTEL S1200BTS 00002000 INTL 20100331) [ 0.035326] ACPI: RMAD 0x00000000BEFE8F18 000078 (v01 INTEL S1200BTS 00000001 INTL 00000001) [ 0.035342] ACPI: SPCR 0x00000000BEFFED98 000050 (v01 INTEL S1200BTS 06222004 INTL 20090903) [ 0.035358] ACPI: HEST 0x00000000BEFFCF18 0000A8 (v01 INTEL S1200BTS 00000001 INTL 00000001) [ 0.035375] ACPI: BERT 0x00000000BEFFED18 000030 (v01 INTEL S1200BTS 00000001 INTL 00000001) [ 0.035391] ACPI: ERST 0x00000000BEFE8C98 000230 (v01 INTEL S1200BTS 00000001 INTL 00000001) [ 0.035407] ACPI: EINJ 0x00000000BEFFC918 000130 (v01 INTEL S1200BTS 00000001 INTL 00000001) [ 0.035415] ACPI: Reserving FACP table memory at [mem 0xbeffca98-0xbeffcb8b] [ 0.035417] ACPI: Reserving DSDT table memory at [mem 0xbefee018-0xbeffae5f] [ 0.035418] ACPI: Reserving FACS table memory at [mem 0xbeffdd40-0xbeffdd7f] [ 0.035419] ACPI: Reserving APIC table memory at [mem 0xbeffb018-0xbeffb669] [ 0.035419] ACPI: Reserving SPMI table memory at [mem 0xbeffec18-0xbeffec57] [ 0.035420] ACPI: Reserving MCFG table memory at [mem 0xbeffeb98-0xbeffebd3] [ 0.035421] ACPI: Reserving WDDT table memory at [mem 0xbeffef18-0xbeffef57] [ 0.035422] ACPI: Reserving HPET table memory at [mem 0xbeffee98-0xbeffeecf] [ 0.035423] ACPI: Reserving SSDT table memory at [mem 0xbefeb018-0xbefec0bf] [ 0.035423] ACPI: Reserving BOOT table memory at [mem 0xbeffee18-0xbeffee3f] [ 0.035424] ACPI: Reserving SSDT table memory at [mem 0xbefe7698-0xbefe7c77] [ 0.035425] ACPI: Reserving SSDT table memory at [mem 0xbefe6018-0xbefe6aa9] [ 0.035426] ACPI: Reserving SSDT table memory at [mem 0xbefea598-0xbefeaae4] [ 0.035427] ACPI: Reserving SSDT table memory at [mem 0xbeffdb18-0xbeffdb80] [ 0.035427] ACPI: Reserving SSDT table memory at [mem 0xbefe9e18-0xbefe9f92] [ 0.035428] ACPI: Reserving RMAD table memory at [mem 0xbefe8f18-0xbefe8f8f] [ 0.035429] ACPI: Reserving SPCR table memory at [mem 0xbeffed98-0xbeffede7] [ 0.035430] ACPI: Reserving HEST table memory at [mem 0xbeffcf18-0xbeffcfbf] [ 0.035431] ACPI: Reserving BERT table memory at [mem 0xbeffed18-0xbeffed47] [ 0.035431] ACPI: Reserving ERST table memory at [mem 0xbefe8c98-0xbefe8ec7] [ 0.035432] ACPI: Reserving EINJ table memory at [mem 0xbeffc918-0xbeffca47] [ 0.035484] Setting APIC routing to Xen PV. [ 0.040272] Zone ranges: [ 0.040274] DMA [mem 0x0000000000001000-0x0000000000ffffff] [ 0.040276] DMA32 [mem 0x0000000001000000-0x0000000020064fff] [ 0.040277] Normal empty [ 0.040278] Movable zone start for each node [ 0.040278] Early memory node ranges [ 0.040279] node 0: [mem 0x0000000000001000-0x000000000009afff] [ 0.040280] node 0: [mem 0x0000000000100000-0x0000000020064fff] [ 0.040282] Initmem setup node 0 [mem 0x0000000000001000-0x0000000020064fff] [ 0.040286] On node 0, zone DMA: 1 pages in unavailable ranges [ 0.040320] On node 0, zone DMA: 101 pages in unavailable ranges [ 0.041965] On node 0, zone DMA32: 32667 pages in unavailable ranges [ 0.041970] p2m virtual area at (____ptrval____), size is 40000000 [ 0.221884] Remapped 101 page(s) [ 0.222585] ACPI: PM-Timer IO Port: 0x408 [ 0.222727] ACPI: LAPIC_NMI (acpi_id[0xff] dfl dfl lint[0x1]) [ 0.222773] IOAPIC[0]: apic_id 2, version 32, address 0xfec00000, GSI 0-23 [ 0.222800] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl) [ 0.222803] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level) [ 0.222856] ACPI: Using ACPI (MADT) for SMP configuration information [ 0.222861] ACPI: HPET id: 0x8086a701 base: 0xfed00000 [ 0.222871] ACPI: SPCR: SPCR table version 1 [ 0.222874] ACPI: SPCR: console: uart,io,0x3f8,115200 [ 0.222936] smpboot: Allowing 4 CPUs, 0 hotplug CPUs [ 0.222952] PM: hibernation: Registered nosave memory: [mem 0x00000000-0x00000fff] [ 0.222955] PM: hibernation: Registered nosave memory: [mem 0x0009b000-0x0009bfff] [ 0.222955] PM: hibernation: Registered nosave memory: [mem 0x0009c000-0x000fffff] [ 0.222957] [mem 0x20065000-0xab9b9fff] available for PCI devices [ 0.222966] Booting kernel on Xen [ 0.222966] Xen version: 4.19-unstable (preserve-AD) [ 0.222969] clocksource: refined-jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 1910969940391419 ns [ 0.227564] setup_percpu: NR_CPUS:64 nr_cpumask_bits:4 nr_cpu_ids:4 nr_node_ids:1 [ 0.227789] percpu: Embedded 54 pages/cpu s180520 r8192 d32472 u524288 [ 0.227795] pcpu-alloc: s180520 r8192 d32472 u524288 alloc=1*2097152 [ 0.227797] pcpu-alloc: [0] 0 1 2 3 [ 0.227854] xen: PV spinlocks enabled [ 0.227857] PV qspinlock hash table entries: 256 (order: 0, 4096 bytes, linear) [ 0.227861] Built 1 zonelists, mobility grouping on. Total pages: 129006 [ 0.227863] Kernel command line: placeholder root=/dev/mapper/italia0--vg-root ro console=hvc0 [ 0.227896] Unknown kernel command line parameters "placeholder", will be passed to user space. [ 0.227938] Dentry cache hash table entries: 65536 (order: 7, 524288 bytes, linear) [ 0.227957] Inode-cache hash table entries: 32768 (order: 6, 262144 bytes, linear) [ 0.228661] mem auto-init: stack:all(zero), heap alloc:off, heap free:off [ 0.228663] software IO TLB: area num 4. [ 0.284012] Memory: 390892K/524284K available (14349K kernel code, 2682K rwdata, 4576K rodata, 1576K init, 1296K bss, 133140K reserved, 0K cma-reserved) [ 0.284187] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1 [ 0.286301] Dynamic Preempt: voluntary [ 0.286385] rcu: Preemptible hierarchical RCU implementation. [ 0.286386] rcu: RCU event tracing is enabled. [ 0.286386] rcu: RCU restricting CPUs from NR_CPUS=64 to nr_cpu_ids=4. [ 0.286387] Trampoline variant of Tasks RCU enabled. [ 0.286388] rcu: RCU calculated value of scheduler-enlistment delay is 100 jiffies. [ 0.286389] rcu: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=4 [ 0.297134] NR_IRQS: 4352, nr_irqs: 456, preallocated irqs: 16 [ 0.297251] xen:events: Using FIFO-based ABI [ 0.297282] xen: --> pirq=1 -> irq=1 (gsi=1) [ 0.297292] xen: --> pirq=2 -> irq=2 (gsi=2) [ 0.297300] xen: --> pirq=3 -> irq=3 (gsi=3) [ 0.297309] xen: --> pirq=4 -> irq=4 (gsi=4) [ 0.297317] xen: --> pirq=5 -> irq=5 (gsi=5) [ 0.297326] xen: --> pirq=6 -> irq=6 (gsi=6) [ 0.297334] xen: --> pirq=7 -> irq=7 (gsi=7) [ 0.297342] xen: --> pirq=8 -> irq=8 (gsi=8) [ 0.297351] xen: --> pirq=9 -> irq=9 (gsi=9) [ 0.297359] xen: --> pirq=10 -> irq=10 (gsi=10) [ 0.297369] xen: --> pirq=11 -> irq=11 (gsi=11) [ 0.297378] xen: --> pirq=12 -> irq=12 (gsi=12) [ 0.297386] xen: --> pirq=13 -> irq=13 (gsi=13) [ 0.297395] xen: --> pirq=14 -> irq=14 (gsi=14) [ 0.297403] xen: --> pirq=15 -> irq=15 (gsi=15) [ 0.297414] rcu: srcu_init: Setting srcu_struct sizes based on contention. [ 0.302531] Console: colour VGA+ 80x25 [ 0.317546] printk: console [tty0] enabled [ 0.318836] printk: console [hvc0] enabled [ 0.318952] ACPI: Core revision 20220331 [ 0.323375] clocksource: xen: mask: 0xffffffffffffffff max_cycles: 0x1cd42e4dffb, max_idle_ns: 881590591483 ns [ 0.323532] Xen: using vcpuop timer interface [ 0.323537] installing Xen timer for CPU 0 [ 0.323681] clocksource: tsc-early: mask: 0xffffffffffffffff max_cycles: 0x2c955ac38be, max_idle_ns: 440795348546 ns [ 0.323839] Calibrating delay loop (skipped), value calculated using timer frequency.. 6185.94 BogoMIPS (lpj=3092974) [ 0.324141] Last level iTLB entries: 4KB 512, 2MB 8, 4MB 8 [ 0.324258] Last level dTLB entries: 4KB 512, 2MB 32, 4MB 32, 1GB 0 [ 0.324383] Spectre V1 : Mitigation: usercopy/swapgs barriers and __user pointer sanitization [ 0.324531] Spectre V2 : Mitigation: Retpolines [ 0.324644] Spectre V2 : Spectre v2 / SpectreRSB mitigation: Filling RSB on context switch [ 0.324845] Spectre V2 : Spectre v2 / SpectreRSB : Filling RSB on VMEXIT [ 0.324963] Spectre V2 : Enabling Restricted Speculation for firmware calls [ 0.325085] Spectre V2 : mitigation: Enabling conditional Indirect Branch Prediction Barrier [ 0.325232] Spectre V2 : User space: Mitigation: STIBP via prctl [ 0.325350] Speculative Store Bypass: Mitigation: Speculative Store Bypass disabled via prctl [ 0.325497] MDS: Mitigation: Clear CPU buffers [ 0.325609] MMIO Stale Data: Unknown: No mitigations [ 0.325741] x86/fpu: Supporting XSAVE feature 0x001: 'x87 floating point registers' [ 0.325844] x86/fpu: Supporting XSAVE feature 0x002: 'SSE registers' [ 0.325963] x86/fpu: Supporting XSAVE feature 0x004: 'AVX registers' [ 0.326083] x86/fpu: xstate_offset[2]: 576, xstate_sizes[2]: 256 [ 0.326203] x86/fpu: Enabled xstate features 0x7, context size is 832 bytes, using 'standard' format. [ 0.340306] Freeing SMP alternatives memory: 40K [ 0.340843] pid_max: default: 32768 minimum: 301 [ 0.340969] LSM: Security Framework initializing [ 0.341088] SELinux: Initializing. [ 0.341221] Mount-cache hash table entries: 1024 (order: 1, 8192 bytes, linear) [ 0.341365] Mountpoint-cache hash table entries: 1024 (order: 1, 8192 bytes, linear) [ 0.341832] cpu 0 spinlock event irq 25 [ 0.341952] VPMU disabled by hypervisor. [ 0.342441] cblist_init_generic: Setting adjustable number of callback queues. [ 0.342586] cblist_init_generic: Setting shift to 2 and lim to 1. [ 0.342752] Performance Events: unsupported p6 CPU model 58 no PMU driver, software events only. [ 0.342842] signal: max sigframe size: 1776 [ 0.343018] rcu: Hierarchical SRCU implementation. [ 0.343133] rcu: Max phase no-delay instances is 400. [ 0.343573] smp: Bringing up secondary CPUs ... [ 0.343951] installing Xen timer for CPU 1 [ 0.344446] cpu 1 spinlock event irq 35 [ 0.345068] MDS CPU bug present and SMT on, data leak possible. See https://www.kernel.org/doc/html/latest/admin-guide/hw-vuln/mds.html for more details. [ 0.345929] installing Xen timer for CPU 2 [ 0.346402] cpu 2 spinlock event irq 41 [ 0.346880] installing Xen timer for CPU 3 [ 0.347316] cpu 3 spinlock event irq 47 [ 0.347316] smp: Brought up 1 node, 4 CPUs [ 0.347316] smpboot: Max logical packages: 1 [ 0.347921] devtmpfs: initialized [ 0.348003] x86/mm: Memory block size: 128MB [ 0.348272] ACPI: PM: Registering ACPI NVS region [mem 0xab9ba000-0xbba3afff] (268963840 bytes) [ 0.351194] ACPI: PM: Registering ACPI NVS region [mem 0xbede0000-0xbefdffff] (2097152 bytes) [ 0.351400] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 1911260446275000 ns [ 0.351554] futex hash table entries: 1024 (order: 4, 65536 bytes, linear) [ 0.351797] PM: RTC time: 10:59:42, date: 2024-06-25 [ 0.351980] NET: Registered PF_NETLINK/PF_ROUTE protocol family [ 0.352123] xen:grant_table: Grant tables using version 1 layout [ 0.352264] Grant table initialized [ 0.352474] audit: initializing netlink subsys (disabled) [ 0.352608] audit: type=2000 audit(1719313183.554:1): state=initialized audit_enabled=0 res=1 [ 0.352890] thermal_sys: Registered thermal governor 'step_wise' [ 0.352892] thermal_sys: Registered thermal governor 'user_space' [ 0.353037] Simple Boot Flag at 0x4f set to 0x1 [ 0.353284] ACPI FADT declares the system doesn't support PCIe ASPM, so disable it [ 0.353558] PCI: MMCONFIG for domain 0000 [bus 00-3f] at [mem 0xf8000000-0xfbffffff] (base 0xf8000000) [ 0.353711] PCI: MMCONFIG at [mem 0xf8000000-0xfbffffff] reserved in E820 [ 0.389621] PCI: Using configuration type 1 for base access [ 0.391627] kprobes: kprobe jump-optimization is enabled. All kprobes are optimized if possible. [ 0.391919] ACPI: Added _OSI(Module Device) [ 0.392006] ACPI: Added _OSI(Processor Device) [ 0.392119] ACPI: Added _OSI(3.0 _SCP Extensions) [ 0.392234] ACPI: Added _OSI(Processor Aggregator Device) [ 0.398983] ACPI: 7 ACPI AML tables successfully acquired and loaded [ 0.399691] xen: registering gsi 9 triggering 0 polarity 0 [ 0.400110] ACPI: [Firmware Bug]: BIOS _OSI(Linux) query ignored [ 0.411264] ACPI: Dynamic OEM Table Load: [ 0.411386] ACPI: SSDT 0xFFFF888005468000 00083B (v01 PmRef Cpu0Cst 00003001 INTL 20100331) [ 0.412134] ACPI: Dynamic OEM Table Load: [ 0.412252] ACPI: SSDT 0xFFFF888005448400 000303 (v01 PmRef ApIst 00003000 INTL 20100331) [ 0.412832] ACPI: Dynamic OEM Table Load: [ 0.412955] ACPI: SSDT 0xFFFF888003653600 000119 (v01 PmRef ApCst 00003000 INTL 20100331) [ 0.414067] ACPI: Interpreter enabled [ 0.414197] ACPI: PM: (supports S0 S1 S3 S5) [ 0.414310] ACPI: Using IOAPIC for interrupt routing [ 0.414451] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug [ 0.414602] PCI: Using E820 reservations for host bridge windows [ 0.414959] ACPI: Enabled 10 GPEs in block 00 to 3F [ 0.421040] acpi ABCDEFGH:00: ACPI dock station (docks/bays count: 1) [ 0.423307] ACPI: PM: Power Resource [FN00] [ 0.423477] ACPI: PM: Power Resource [FN01] [ 0.423643] ACPI: PM: Power Resource [FN02] [ 0.423808] ACPI: PM: Power Resource [FN03] [ 0.423899] ACPI: PM: Power Resource [FN04] [ 0.424728] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-3e]) [ 0.424845] acpi PNP0A08:00: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI HPX-Type3] [ 0.425422] acpi PNP0A08:00: _OSC: platform does not support [LTR] [ 0.426107] acpi PNP0A08:00: _OSC: OS now controls [PME PCIeCapability] [ 0.426227] acpi PNP0A08:00: FADT indicates ASPM is unsupported, using BIOS configuration [ 0.426885] PCI host bridge to bus 0000:00 [ 0.426998] pci_bus 0000:00: root bus resource [io 0x0000-0x0cf7 window] [ 0.427121] pci_bus 0000:00: root bus resource [io 0x0d00-0xffff window] [ 0.427270] pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff window] [ 0.427415] pci_bus 0000:00: root bus resource [mem 0x000d0000-0x000e7fff window] [ 0.427558] pci_bus 0000:00: root bus resource [mem 0xc0000000-0xfeafffff window] [ 0.427702] pci_bus 0000:00: root bus resource [mem 0xfed40000-0xfed44fff window] [ 0.427843] pci_bus 0000:00: root bus resource [bus 00-3e] [ 0.428000] pci 0000:00:00.0: [8086:0158] type 00 class 0x060000 [ 0.428646] pci 0000:00:19.0: [8086:1502] type 00 class 0x020000 [ 0.428842] pci 0000:00:19.0: reg 0x10: [mem 0xc1b00000-0xc1b1ffff] [ 0.429002] pci 0000:00:19.0: reg 0x14: [mem 0xc1b70000-0xc1b70fff] [ 0.429160] pci 0000:00:19.0: reg 0x18: [io 0x4040-0x405f] [ 0.429617] pci 0000:00:19.0: PME# supported from D0 D3hot D3cold [ 0.430006] pci 0000:00:1a.0: [8086:1c2d] type 00 class 0x0c0320 [ 0.430200] pci 0000:00:1a.0: reg 0x10: [mem 0xc1b60000-0xc1b603ff] [ 0.430745] pci 0000:00:1a.0: PME# supported from D0 D3hot D3cold [ 0.431058] pci 0000:00:1c.0: [8086:1c10] type 01 class 0x060400 [ 0.431637] pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold [ 0.431849] pci 0000:00:1c.0: Enabling MPC IRBNCE [ 0.431971] pci 0000:00:1c.0: Intel PCH root port ACS workaround enabled [ 0.432276] pci 0000:00:1c.4: [8086:1c18] type 01 class 0x060400 [ 0.432855] pci 0000:00:1c.4: PME# supported from D0 D3hot D3cold [ 0.433061] pci 0000:00:1c.4: Enabling MPC IRBNCE [ 0.433181] pci 0000:00:1c.4: Intel PCH root port ACS workaround enabled [ 0.433503] pci 0000:00:1d.0: [8086:1c26] type 00 class 0x0c0320 [ 0.433697] pci 0000:00:1d.0: reg 0x10: [mem 0xc1b50000-0xc1b503ff] [ 0.434234] pci 0000:00:1d.0: PME# supported from D0 D3hot D3cold [ 0.434562] pci 0000:00:1e.0: [8086:244e] type 01 class 0x060401 [ 0.435154] pci 0000:00:1f.0: [8086:1c52] type 00 class 0x060100 [ 0.435904] pci 0000:00:1f.2: [8086:1c02] type 00 class 0x010601 [ 0.436098] pci 0000:00:1f.2: reg 0x10: [io 0x4090-0x4097] [ 0.436255] pci 0000:00:1f.2: reg 0x14: [io 0x4080-0x4083] [ 0.436410] pci 0000:00:1f.2: reg 0x18: [io 0x4070-0x4077] [ 0.436567] pci 0000:00:1f.2: reg 0x1c: [io 0x4060-0x4063] [ 0.436724] pci 0000:00:1f.2: reg 0x20: [io 0x4020-0x403f] [ 0.436882] pci 0000:00:1f.2: reg 0x24: [mem 0xc1b40000-0xc1b407ff] [ 0.437247] pci 0000:00:1f.2: PME# supported from D3hot [ 0.437550] pci 0000:00:1f.3: [8086:1c22] type 00 class 0x0c0500 [ 0.437767] pci 0000:00:1f.3: reg 0x10: [mem 0xc1b30000-0xc1b300ff 64bit] [ 0.437961] pci 0000:00:1f.3: reg 0x20: [io 0x4000-0x401f] [ 0.438449] pci 0000:00:1c.0: PCI bridge to [bus 01] [ 0.438576] pci 0000:00:1c.0: bridge window [io 0x3000-0x3fff] [ 0.438707] pci 0000:00:1c.0: bridge window [mem 0xc1000000-0xc19fffff] [ 0.438853] pci 0000:00:1c.0: bridge window [mem 0xc1c00000-0xc25fffff 64bit pref] [ 0.439252] pci 0000:02:00.0: [8086:10d3] type 00 class 0x020000 [ 0.439468] pci 0000:02:00.0: reg 0x10: [mem 0xc1a00000-0xc1a1ffff] [ 0.439713] pci 0000:02:00.0: reg 0x18: [io 0x2000-0x201f] [ 0.439887] pci 0000:02:00.0: reg 0x1c: [mem 0xc1a20000-0xc1a23fff] [ 0.440495] pci 0000:02:00.0: PME# supported from D0 D3hot D3cold [ 0.441040] pci 0000:00:1c.4: PCI bridge to [bus 02] [ 0.441169] pci 0000:00:1c.4: bridge window [io 0x2000-0x2fff] [ 0.441301] pci 0000:00:1c.4: bridge window [mem 0xc1a00000-0xc1afffff] [ 0.441537] pci_bus 0000:03: extended config space not accessible [ 0.441718] pci 0000:03:02.0: [126f:0712] type 00 class 0x030000 [ 0.441911] pci 0000:03:02.0: reg 0x10: [mem 0xc0000000-0xc0ffffff] [ 0.442304] pci 0000:03:02.0: Video device with shadowed ROM at [mem 0x000c0000-0x000dffff] [ 0.442561] pci 0000:03:02.0: supports D1 D2 [ 0.442930] pci 0000:00:1e.0: PCI bridge to [bus 03] (subtractive decode) [ 0.443075] pci 0000:00:1e.0: bridge window [mem 0xc0000000-0xc0ffffff] [ 0.443218] pci 0000:00:1e.0: bridge window [io 0x0000-0x0cf7 window] (subtractive decode) [ 0.443367] pci 0000:00:1e.0: bridge window [io 0x0d00-0xffff window] (subtractive decode) [ 0.443515] pci 0000:00:1e.0: bridge window [mem 0x000a0000-0x000bffff window] (subtractive decode) [ 0.443663] pci 0000:00:1e.0: bridge window [mem 0x000d0000-0x000e7fff window] (subtractive decode) [ 0.443812] pci 0000:00:1e.0: bridge window [mem 0xc0000000-0xfeafffff window] (subtractive decode) [ 0.443842] pci 0000:00:1e.0: bridge window [mem 0xfed40000-0xfed44fff window] (subtractive decode) [ 0.444078] pci_bus 0000:00: on NUMA node 0 [ 0.444241] xen: registering gsi 13 triggering 1 polarity 0 [ 0.444738] ACPI: PCI: Interrupt link LNKA configured for IRQ 11 [ 0.444914] ACPI: PCI: Interrupt link LNKB configured for IRQ 10 [ 0.445102] ACPI: PCI: Interrupt link LNKC configured for IRQ 0 [ 0.445220] ACPI: PCI: Interrupt link LNKC disabled [ 0.445402] ACPI: PCI: Interrupt link LNKD configured for IRQ 10 [ 0.445589] ACPI: PCI: Interrupt link LNKE configured for IRQ 3 [ 0.445776] ACPI: PCI: Interrupt link LNKF configured for IRQ 11 [ 0.445911] ACPI: PCI: Interrupt link LNKG configured for IRQ 5 [ 0.446098] ACPI: PCI: Interrupt link LNKH configured for IRQ 0 [ 0.446217] ACPI: PCI: Interrupt link LNKH disabled [ 0.446638] xen:balloon: Initialising balloon driver [ 0.446905] iommu: Default domain type: Translated [ 0.455843] iommu: DMA domain TLB invalidation policy: lazy mode [ 0.456013] SCSI subsystem initialized [ 0.456140] libata version 3.00 loaded. [ 0.456140] ACPI: bus type USB registered [ 0.456140] usbcore: registered new interface driver usbfs [ 0.456140] usbcore: registered new interface driver hub [ 0.456244] usbcore: registered new device driver usb [ 0.456371] pps_core: LinuxPPS API ver. 1 registered [ 0.456842] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti [ 0.456995] PTP clock support registered [ 0.457125] Advanced Linux Sound Architecture Driver Initialized. [ 0.457125] NetLabel: Initializing [ 0.457226] NetLabel: domain hash size = 128 [ 0.457340] NetLabel: protocols = UNLABELED CIPSOv4 CALIPSO [ 0.457470] NetLabel: unlabeled traffic allowed by default [ 0.457867] PCI: Using ACPI for IRQ routing [ 0.468775] PCI: pci_cache_line_size set to 64 bytes [ 0.468925] e820: reserve RAM buffer [mem 0x0009b000-0x0009ffff] [ 0.468927] e820: reserve RAM buffer [mem 0x20065000-0x23ffffff] [ 0.468948] pci 0000:03:02.0: vgaarb: setting as boot VGA device [ 0.468984] pci 0000:03:02.0: vgaarb: bridge control possible [ 0.469101] pci 0000:03:02.0: vgaarb: VGA device added: decodes=io+mem,owns=io+mem,locks=none [ 0.469247] vgaarb: loaded [ 0.472189] clocksource: Switched to clocksource tsc-early [ 0.472368] VFS: Disk quotas dquot_6.6.0 [ 0.472491] VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes) [ 0.472628] hugetlbfs: disabling because there are no supported hugepage sizes [ 0.472782] pnp: PnP ACPI init [ 0.472782] system 00:00: [io 0x0680-0x069f] has been reserved [ 0.472812] system 00:00: [io 0xffff] has been reserved [ 0.472928] system 00:00: [io 0xffff] has been reserved [ 0.473044] system 00:00: [io 0xffff] has been reserved [ 0.473160] system 00:00: [io 0x0400-0x0453] has been reserved [ 0.473277] system 00:00: [io 0x0458-0x047f] has been reserved [ 0.473396] system 00:00: [io 0x0500-0x057f] has been reserved [ 0.473515] system 00:00: [io 0x164e-0x164f] has been reserved [ 0.473554] system 00:00: [io 0x0900-0x090f] has been reserved [ 0.473554] system 00:00: [io 0x0295-0x0296] has been reserved [ 0.473913] xen: registering gsi 8 triggering 1 polarity 0 [ 0.473972] system 00:02: [io 0x0454-0x0457] has been reserved [ 0.474372] xen: registering gsi 4 triggering 1 polarity 0 [ 0.474376] Already setup the GSI :4 [ 0.474888] system 00:04: [mem 0xfed1c000-0xfed1ffff] has been reserved [ 0.475044] system 00:04: [mem 0xfed10000-0xfed17fff] has been reserved [ 0.475164] system 00:04: [mem 0xfed18000-0xfed18fff] has been reserved [ 0.475284] system 00:04: [mem 0xfed19000-0xfed19fff] has been reserved [ 0.475405] system 00:04: [mem 0xf8000000-0xfbffffff] has been reserved [ 0.475525] system 00:04: [mem 0xfed20000-0xfed3ffff] has been reserved [ 0.475646] system 00:04: [mem 0xfed90000-0xfed93fff] could not be reserved [ 0.475766] system 00:04: [mem 0xfed45000-0xfed8ffff] has been reserved [ 0.475895] system 00:04: [mem 0xff000000-0xffffffff] could not be reserved [ 0.476017] system 00:04: [mem 0xfee00000-0xfeefffff] has been reserved [ 0.476136] system 00:04: [mem 0xc1b90000-0xc1b90fff] has been reserved [ 0.476524] system 00:05: [mem 0x00000000-0x0009cfff] could not be reserved [ 0.476693] pnp: PnP ACPI: found 6 devices [ 0.504854] PM-Timer failed consistency check (0xffffff) - aborting. [ 0.505027] NET: Registered PF_INET protocol family [ 0.505186] IP idents hash table entries: 8192 (order: 4, 65536 bytes, linear) [ 0.505508] tcp_listen_portaddr_hash hash table entries: 256 (order: 0, 4096 bytes, linear) [ 0.505657] Table-perturb hash table entries: 65536 (order: 6, 262144 bytes, linear) [ 0.505804] TCP established hash table entries: 4096 (order: 3, 32768 bytes, linear) [ 0.505985] TCP bind hash table entries: 4096 (order: 5, 131072 bytes, linear) [ 0.506153] TCP: Hash tables configured (established 4096 bind 4096) [ 0.506309] UDP hash table entries: 256 (order: 1, 8192 bytes, linear) [ 0.506430] UDP-Lite hash table entries: 256 (order: 1, 8192 bytes, linear) [ 0.506577] NET: Registered PF_UNIX/PF_LOCAL protocol family [ 0.506945] RPC: Registered named UNIX socket transport module. [ 0.507068] RPC: Registered udp transport module. [ 0.507182] RPC: Registered tcp transport module. [ 0.507295] RPC: Registered tcp NFSv4.1 backchannel transport module. [ 0.507685] pci 0000:00:1c.0: PCI bridge to [bus 01] [ 0.507810] pci 0000:00:1c.0: bridge window [io 0x3000-0x3fff] [ 0.507958] pci 0000:00:1c.0: bridge window [mem 0xc1000000-0xc19fffff] [ 0.508090] pci 0000:00:1c.0: bridge window [mem 0xc1c00000-0xc25fffff 64bit pref] [ 0.508259] pci 0000:00:1c.4: PCI bridge to [bus 02] [ 0.508379] pci 0000:00:1c.4: bridge window [io 0x2000-0x2fff] [ 0.508515] pci 0000:00:1c.4: bridge window [mem 0xc1a00000-0xc1afffff] [ 0.508670] pci 0000:00:1e.0: PCI bridge to [bus 03] [ 0.508802] pci 0000:00:1e.0: bridge window [mem 0xc0000000-0xc0ffffff] [ 0.508967] pci_bus 0000:00: resource 4 [io 0x0000-0x0cf7 window] [ 0.509087] pci_bus 0000:00: resource 5 [io 0x0d00-0xffff window] [ 0.509205] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff window] [ 0.509326] pci_bus 0000:00: resource 7 [mem 0x000d0000-0x000e7fff window] [ 0.509446] pci_bus 0000:00: resource 8 [mem 0xc0000000-0xfeafffff window] [ 0.509565] pci_bus 0000:00: resource 9 [mem 0xfed40000-0xfed44fff window] [ 0.509709] pci_bus 0000:01: resource 0 [io 0x3000-0x3fff] [ 0.509826] pci_bus 0000:01: resource 1 [mem 0xc1000000-0xc19fffff] [ 0.509959] pci_bus 0000:01: resource 2 [mem 0xc1c00000-0xc25fffff 64bit pref] [ 0.510103] pci_bus 0000:02: resource 0 [io 0x2000-0x2fff] [ 0.510219] pci_bus 0000:02: resource 1 [mem 0xc1a00000-0xc1afffff] [ 0.510338] pci_bus 0000:03: resource 1 [mem 0xc0000000-0xc0ffffff] [ 0.510457] pci_bus 0000:03: resource 4 [io 0x0000-0x0cf7 window] [ 0.510576] pci_bus 0000:03: resource 5 [io 0x0d00-0xffff window] [ 0.510695] pci_bus 0000:03: resource 6 [mem 0x000a0000-0x000bffff window] [ 0.510815] pci_bus 0000:03: resource 7 [mem 0x000d0000-0x000e7fff window] [ 0.510945] pci_bus 0000:03: resource 8 [mem 0xc0000000-0xfeafffff window] [ 0.511100] pci_bus 0000:03: resource 9 [mem 0xfed40000-0xfed44fff window] [ 0.511341] xen: registering gsi 22 triggering 0 polarity 1 [ 0.511363] xen: --> pirq=22 -> irq=22 (gsi=22) [ 0.533025] pci 0000:00:1a.0: quirk_usb_early_handoff+0x0/0x720 took 21231 usecs [ 0.533251] xen: registering gsi 20 triggering 0 polarity 1 [ 0.533277] xen: --> pirq=20 -> irq=20 (gsi=20) [ 0.554994] pci 0000:00:1d.0: quirk_usb_early_handoff+0x0/0x720 took 21279 usecs [ 0.555197] PCI: CLS 64 bytes, default 64 [ 0.555318] PCI-DMA: Using software bounce buffering for IO (SWIOTLB) [ 0.555393] Unpacking initramfs... [ 0.555436] software IO TLB: mapped [mem 0x000000001b180000-0x000000001f180000] (64MB) [ 0.555785] kvm: no hardware support for 'kvm_intel' [ 0.555915] has_svm: not amd or hygon [ 0.556030] kvm: no hardware support for 'kvm_amd' [ 0.556175] clocksource: tsc: mask: 0xffffffffffffffff max_cycles: 0x2c955ac38be, max_idle_ns: 440795348546 ns [ 0.556391] clocksource: Switched to clocksource tsc [ 0.557665] Initialise system trusted keyrings [ 0.557935] workingset: timestamp_bits=62 max_order=17 bucket_order=0 [ 0.559093] NFS: Registering the id_resolver key type [ 0.559217] Key type id_resolver registered [ 0.559329] Key type id_legacy registered [ 0.559519] 9p: Installing v9fs 9p2000 file system support [ 0.569707] Key type asymmetric registered [ 0.569830] Asymmetric key parser 'x509' registered [ 0.569968] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 251) [ 0.570122] io scheduler mq-deadline registered [ 0.570237] io scheduler kyber registered [ 0.570744] xen: registering gsi 16 triggering 0 polarity 1 [ 0.570770] xen: --> pirq=16 -> irq=16 (gsi=16) [ 0.570989] pcieport 0000:00:1c.0: PME: Signaling with IRQ 50 [ 0.571370] xen: registering gsi 16 triggering 0 polarity 1 [ 0.571375] Already setup the GSI :16 [ 0.571690] pcieport 0000:00:1c.4: PME: Signaling with IRQ 51 [ 0.572122] input: Sleep Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0E:00/input/input0 [ 0.572373] ACPI: button: Sleep Button [SLPB] [ 0.572532] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input1 [ 0.573474] ACPI: button: Power Button [PWRF] [ 0.573959] Monitor-Mwait will be used to enter C-1 state [ 0.573973] Monitor-Mwait will be used to enter C-3 state [ 0.573981] ACPI: \_PR_.CPU0: Found 2 idle states [ 0.574381] ACPI: \_PR_.CPU1: Found 2 idle states [ 0.574786] ACPI: \_PR_.CPU2: Found 2 idle states [ 0.575120] ACPI: \_PR_.CPU3: Found 2 idle states [ 0.575671] thermal LNXTHERM:00: registered as thermal_zone0 [ 0.575793] ACPI: thermal: Thermal Zone [TZ00] (28 C) [ 0.576101] thermal LNXTHERM:01: registered as thermal_zone1 [ 0.576222] ACPI: thermal: Thermal Zone [TZ01] (30 C) [ 0.576598] xen:xen_evtchn: Event-channel device installed [ 0.576785] xen_pciback: backend is vpci [ 0.577535] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled [ 0.578248] hpet_acpi_add: no address or irqs in _CRS [ 0.578439] Non-volatile memory driver v1.3 [ 0.578552] AMD-Vi: AMD IOMMUv2 functionality not available on this system - This is not a bug. [ 0.580316] loop: module loaded [ 0.585124] ahci 0000:00:1f.2: version 3.0 [ 0.585221] xen: registering gsi 21 triggering 0 polarity 1 [ 0.585247] xen: --> pirq=21 -> irq=21 (gsi=21) [ 0.595543] ahci 0000:00:1f.2: AHCI 0001.0300 32 slots 6 ports 3 Gbps 0x3f impl SATA mode [ 0.595699] ahci 0000:00:1f.2: flags: 64bit ncq sntf pm led clo pio slum part ems apst [ 0.611147] scsi host0: ahci [ 0.611666] scsi host1: ahci [ 0.612049] scsi host2: ahci [ 0.612409] scsi host3: ahci [ 0.612741] scsi host4: ahci [ 0.613093] scsi host5: ahci [ 0.613237] ata1: SATA max UDMA/133 abar m2048@0xc1b40000 port 0xc1b40100 irq 53 [ 0.613385] ata2: SATA max UDMA/133 abar m2048@0xc1b40000 port 0xc1b40180 irq 53 [ 0.613543] ata3: SATA max UDMA/133 abar m2048@0xc1b40000 port 0xc1b40200 irq 53 [ 0.613689] ata4: SATA max UDMA/133 abar m2048@0xc1b40000 port 0xc1b40280 irq 53 [ 0.613833] ata5: SATA max UDMA/133 abar m2048@0xc1b40000 port 0xc1b40300 irq 53 [ 0.613978] ata6: SATA max UDMA/133 abar m2048@0xc1b40000 port 0xc1b40380 irq 53 [ 0.614315] tun: Universal TUN/TAP device driver, 1.6 [ 0.614532] e100: Intel(R) PRO/100 Network Driver [ 0.614648] e100: Copyright(c) 1999-2006 Intel Corporation [ 0.614773] sky2: driver version 1.30 [ 0.614910] xen_netfront: Initialising Xen virtual ethernet driver [ 0.623991] xen: registering gsi 22 triggering 0 polarity 1 [ 0.623999] Already setup the GSI :22 [ 0.624205] ehci-pci 0000:00:1a.0: EHCI Host Controller [ 0.624418] ehci-pci 0000:00:1a.0: new USB bus registered, assigned bus number 1 [ 0.624616] ehci-pci 0000:00:1a.0: debug port 2 [ 0.628768] ehci-pci 0000:00:1a.0: irq 22, io mem 0xc1b60000 [ 0.635450] ehci-pci 0000:00:1a.0: USB 2.0 started, EHCI 1.00 [ 0.635676] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 6.01 [ 0.635825] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 0.635969] usb usb1: Product: EHCI Host Controller [ 0.636083] usb usb1: Manufacturer: Linux 6.1.95+ ehci_hcd [ 0.636200] usb usb1: SerialNumber: 0000:00:1a.0 [ 0.636682] hub 1-0:1.0: USB hub found [ 0.636825] hub 1-0:1.0: 2 ports detected [ 0.637284] xen: registering gsi 20 triggering 0 polarity 1 [ 0.637295] Already setup the GSI :20 [ 0.637502] ehci-pci 0000:00:1d.0: EHCI Host Controller [ 0.637756] ehci-pci 0000:00:1d.0: new USB bus registered, assigned bus number 2 [ 0.637947] ehci-pci 0000:00:1d.0: debug port 2 [ 0.638241] Freeing initrd memory: 19884K [ 0.642099] ehci-pci 0000:00:1d.0: irq 20, io mem 0xc1b50000 [ 0.648496] ehci-pci 0000:00:1d.0: USB 2.0 started, EHCI 1.00 [ 0.648713] usb usb2: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 6.01 [ 0.648861] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 0.649007] usb usb2: Product: EHCI Host Controller [ 0.649122] usb usb2: Manufacturer: Linux 6.1.95+ ehci_hcd [ 0.649238] usb usb2: SerialNumber: 0000:00:1d.0 [ 0.649573] hub 2-0:1.0: USB hub found [ 0.649704] hub 2-0:1.0: 2 ports detected [ 0.650020] usbcore: registered new interface driver usblp [ 0.650151] usbcore: registered new interface driver usb-storage [ 0.650298] i8042: PNP: No PS/2 controller found. [ 0.650653] rtc_cmos 00:01: RTC can wake from S4 [ 0.651271] rtc_cmos 00:01: registered as rtc0 [ 0.651451] rtc_cmos 00:01: alarms up to one month, y3k, 242 bytes nvram [ 0.651626] device-mapper: uevent: version 1.0.3 [ 0.651722] xen: registering gsi 22 triggering 0 polarity 1 [ 0.651749] Already setup the GSI :22 [ 0.651855] device-mapper: ioctl: 4.47.0-ioctl (2022-07-28) initialised: dm-devel@redhat.com [ 0.651925] i801_smbus 0000:00:1f.3: SMBus using PCI interrupt [ 0.652020] intel_pstate: CPU model not supported [ 0.652263] hid: raw HID events driver (C) Jiri Kosina [ 0.652507] usbcore: registered new interface driver usbhid [ 0.652630] usbhid: USB HID core driver [ 0.653088] Initializing XFRM netlink socket [ 0.653181] i2c i2c-0: 1/4 memory slots populated (from DMI) [ 0.653333] NET: Registered PF_INET6 protocol family [ 0.653875] Segment Routing with IPv6 [ 0.653987] i2c i2c-0: Successfully instantiated SPD at 0x51 [ 0.654114] In-situ OAM (IOAM) with IPv6 [ 0.654256] sit: IPv6, IPv4 and MPLS over IPv4 tunneling driver [ 0.654497] NET: Registered PF_PACKET protocol family [ 0.654658] 9pnet: Installing 9P2000 support [ 0.654788] Key type dns_resolver registered [ 0.655199] IPI shorthand broadcast: enabled [ 0.655336] sched_clock: Marking stable (628737484, 26420455)->(665775871, -10617932) [ 0.655845] registered taskstats version 1 [ 0.655958] Loading compiled-in X.509 certificates [ 0.658271] PM: Magic number: 12:381:983 [ 0.658514] printk: console [netcon0] enabled [ 0.658630] netconsole: network logging started [ 0.658934] cfg80211: Loading compiled-in X.509 certificates for regulatory database [ 0.670738] cfg80211: Loaded X.509 cert 'sforshee: 00b28ddf47aef9cea7' [ 0.671043] cfg80211: Loaded X.509 cert 'wens: 61c038651aabdcf94bd0ac7ff06c7248db18c600' [ 0.671654] cfg80211: loaded regulatory.db is malformed or signature is missing/invalid [ 0.671827] ALSA device list: [ 0.671947] No soundcards found. [ 0.878495] usb 1-1: new high-speed USB device number 2 using ehci-pci [ 0.886494] usb 2-1: new high-speed USB device number 2 using ehci-pci [ 0.923120] ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300) [ 0.923262] ata2: SATA link down (SStatus 0 SControl 300) [ 0.923404] ata3: SATA link up 1.5 Gbps (SStatus 113 SControl 300) [ 0.923557] ata5: SATA link down (SStatus 0 SControl 300) [ 0.923696] ata4: SATA link down (SStatus 0 SControl 300) [ 0.923883] ata6: SATA link down (SStatus 0 SControl 300) [ 0.924510] ata1.00: ATA-8: WDC WD1003FBYZ-010FB0, 01.01V03, max UDMA/133 [ 0.925152] ata1.00: 1953525168 sectors, multi 16: LBA48 NCQ (depth 32), AA [ 0.926724] ata1.00: configured for UDMA/133 [ 0.927012] scsi 0:0:0:0: Direct-Access ATA WDC WD1003FBYZ-0 1V03 PQ: 0 ANSI: 5 [ 0.927127] ata3.00: ATAPI: Slimtype DVD A DS8ABSH, AP52, max UDMA/100 [ 0.927914] sd 0:0:0:0: Attached scsi generic sg0 type 0 [ 0.928078] sd 0:0:0:0: [sda] 1953525168 512-byte logical blocks: (1.00 TB/932 GiB) [ 0.928271] sd 0:0:0:0: [sda] Write Protect is off [ 0.928404] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00 [ 0.928441] ata3.00: configured for UDMA/100 [ 0.928516] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 0.928882] sd 0:0:0:0: [sda] Preferred minimum I/O size 512 bytes [ 0.936622] scsi 2:0:0:0: CD-ROM Slimtype DVD A DS8ABSH AP52 PQ: 0 ANSI: 5 [ 0.954456] sda: sda1 sda2 < sda5 > [ 0.955030] sd 0:0:0:0: [sda] Attached SCSI disk [ 0.990146] sr 2:0:0:0: [sr0] scsi3-mmc drive: 24x/24x writer dvd-ram cd/rw xa/form2 cdda tray [ 0.990302] cdrom: Uniform CD-ROM driver Revision: 3.20 [ 1.007133] usb 1-1: New USB device found, idVendor=8087, idProduct=0024, bcdDevice= 0.00 [ 1.007287] usb 1-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0 [ 1.007806] hub 1-1:1.0: USB hub found [ 1.008127] hub 1-1:1.0: 6 ports detected [ 1.015153] usb 2-1: New USB device found, idVendor=8087, idProduct=0024, bcdDevice= 0.00 [ 1.015306] usb 2-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0 [ 1.015798] hub 2-1:1.0: USB hub found [ 1.016138] hub 2-1:1.0: 6 ports detected [ 1.016944] sr 2:0:0:0: Attached scsi CD-ROM sr0 [ 1.017066] sr 2:0:0:0: Attached scsi generic sg1 type 5 [ 1.018281] Freeing unused kernel image (initmem) memory: 1576K [ 1.018403] Write protecting the kernel read-only data: 22528k [ 1.039161] Freeing unused kernel image (text/rodata gap) memory: 2032K [ 1.040372] Freeing unused kernel image (rodata/data gap) memory: 1568K [ 1.205416] x86/mm: Checked W+X mappings: passed, no W+X pages found. [ 1.205551] Run /init as init process [ 1.205661] with arguments: [ 1.205661] /init [ 1.205662] placeholder [ 1.205663] with environment: [ 1.205664] HOME=/ [ 1.205664] TERM=linux [ 1.552470] e1000e: Intel(R) PRO/1000 Network Driver [ 1.552597] e1000e: Copyright(c) 1999 - 2015 Intel Corporation. [ 1.552818] xen: registering gsi 19 triggering 0 polarity 1 [ 1.552848] xen: --> pirq=19 -> irq=19 (gsi=19) [ 1.553103] e1000e 0000:00:19.0: Interrupt Throttling Rate (ints/sec) set to dynamic conservative mode [ 1.659801] e1000e 0000:00:19.0 0000:00:19.0 (uninitialized): registered PHC clock [ 1.757351] e1000e 0000:00:19.0 eth0: (PCI Express:2.5GT/s:Width x1) 00:1e:67:96:a4:17 [ 1.757520] e1000e 0000:00:19.0 eth0: Intel(R) PRO/1000 Network Connection [ 1.757688] e1000e 0000:00:19.0 eth0: MAC: 10, PHY: 11, PBA No: 0050FF-0FF [ 1.757921] xen: registering gsi 16 triggering 0 polarity 1 [ 1.757928] Already setup the GSI :16 [ 1.758357] e1000e 0000:02:00.0: Interrupt Throttling Rate (ints/sec) set to dynamic conservative mode [ 1.801490] e1000e 0000:02:00.0 0000:02:00.0 (uninitialized): registered PHC clock [ 1.847997] e1000e 0000:02:00.0 eth1: (PCI Express:2.5GT/s:Width x1) 00:1e:67:96:a4:16 [ 1.848150] e1000e 0000:02:00.0 eth1: Intel(R) PRO/1000 Network Connection [ 1.848356] e1000e 0000:02:00.0 eth1: MAC: 3, PHY: 8, PBA No: 1000FF-0FF [ 1.850979] e1000e 0000:02:00.0 enx001e6796a416: renamed from eth1 [ 1.858732] e1000e 0000:00:19.0 enx001e6796a417: renamed from eth0 [ 1.914433] random: crng init done [ 4.429541] EXT4-fs (dm-0): mounting ext3 file system using the ext4 subsystem [ 4.451700] EXT4-fs (dm-0): mounted filesystem with ordered data mode. Quota mode: none. [ 7.921444] EXT4-fs (dm-0): re-mounted. Quota mode: none. [ 9.771740] EXT4-fs (sda1): mounting ext3 file system using the ext4 subsystem [ 9.805003] EXT4-fs (sda1): mounted filesystem with ordered data mode. Quota mode: none. [ 9.890912] Adding 1949692k swap on /dev/mapper/italia0--vg-swap_1. Priority:-2 extents:1 across:1949692k [ 11.648064] xenbr0: port 1(enx001e6796a416) entered blocking state [ 11.648210] xenbr0: port 1(enx001e6796a416) entered disabled state [ 11.648365] device enx001e6796a416 entered promiscuous mode [ 14.214598] e1000e 0000:02:00.0 enx001e6796a416: NIC Link is Up 1000 Mbps Full Duplex, Flow Control: None [ 14.215196] IPv6: ADDRCONF(NETDEV_CHANGE): enx001e6796a416: link becomes ready [ 14.215371] xenbr0: port 1(enx001e6796a416) entered blocking state [ 14.215503] xenbr0: port 1(enx001e6796a416) entered forwarding state [ 14.215736] IPv6: ADDRCONF(NETDEV_CHANGE): xenbr0: link becomes ready