[ 0.000000] Linux version 6.1.95+ (osstest@himrod0) (gcc (Debian 12.2.0-14) 12.2.0, GNU ld (GNU Binutils for Debian) 2.40) #1 SMP PREEMPT_DYNAMIC Tue Jun 25 08:13:18 UTC 2024 [ 0.000000] Command line: placeholder root=/dev/mapper/debina0--vg-root ro console=hvc0 [ 0.000000] Released 0 page(s) [ 0.000000] BIOS-provided physical RAM map: [ 0.000000] Xen: [mem 0x0000000000000000-0x0000000000099fff] usable [ 0.000000] Xen: [mem 0x000000000009ac00-0x00000000000fffff] reserved [ 0.000000] Xen: [mem 0x0000000000100000-0x0000000020065fff] usable [ 0.000000] Xen: [mem 0x00000000796ef000-0x00000000798bdfff] reserved [ 0.000000] Xen: [mem 0x00000000799b7000-0x0000000079e5afff] ACPI NVS [ 0.000000] Xen: [mem 0x0000000079e5b000-0x000000007bdb0fff] reserved [ 0.000000] Xen: [mem 0x000000007bdb2000-0x000000007be37fff] reserved [ 0.000000] Xen: [mem 0x0000000080000000-0x000000008fffffff] reserved [ 0.000000] Xen: [mem 0x00000000fbffc000-0x00000000fbffcfff] reserved [ 0.000000] Xen: [mem 0x00000000fec00000-0x00000000fec00fff] reserved [ 0.000000] Xen: [mem 0x00000000fed1c000-0x00000000fed1ffff] reserved [ 0.000000] Xen: [mem 0x00000000fee00000-0x00000000feefffff] reserved [ 0.000000] Xen: [mem 0x00000000ff000000-0x00000000ffffffff] reserved [ 0.000000] NX (Execute Disable) protection: active [ 0.000000] SMBIOS 2.8 present. [ 0.000000] DMI: Supermicro SYS-5018D-FN8T/X10SDV-TP8F, BIOS 1.0b 11/21/2016 [ 0.000000] Hypervisor detected: Xen PV [ 0.000458] tsc: Detected 2199.998 MHz processor [ 0.000897] e820: update [mem 0x00000000-0x00000fff] usable ==> reserved [ 0.000901] e820: remove [mem 0x000a0000-0x000fffff] usable [ 0.000907] last_pfn = 0x20066 max_arch_pfn = 0x400000000 [ 0.000909] Disabled [ 0.000910] x86/PAT: MTRRs disabled, skipping PAT initialization too. [ 0.000914] x86/PAT: Configuration [0-7]: WB WT UC- UC WC WP UC UC [ 0.000954] Kernel/User page tables isolation: disabled on XEN PV. [ 0.027690] RAMDISK: [mem 0x04000000-0x0536afff] [ 0.027699] ACPI: Early table checksum verification disabled [ 0.028298] ACPI: RSDP 0x00000000000F0580 000024 (v02 SUPERM) [ 0.028310] ACPI: XSDT 0x00000000799FF098 0000B4 (v01 SUPERM SMCI--MB 01072009 AMI 00010013) [ 0.028346] ACPI: FACP 0x0000000079A17AC0 00010C (v05 SUPERM SMCI--MB 01072009 AMI 00010013) [ 0.028394] ACPI: DSDT 0x00000000799FF1E8 0188D5 (v02 SUPERM SMCI--MB 01072009 INTL 20091013) [ 0.028410] ACPI: FACS 0x0000000079E59F80 000040 [ 0.028426] ACPI: APIC 0x0000000079A17BD0 0000BC (v03 SUPERM SMCI--MB 01072009 AMI 00010013) [ 0.028442] ACPI: FPDT 0x0000000079A17C90 000044 (v01 SUPERM SMCI--MB 01072009 AMI 00010013) [ 0.028458] ACPI: FIDT 0x0000000079A17CD8 00009C (v01 SUPERM SMCI--MB 01072009 AMI 00010013) [ 0.028474] ACPI: MCFG 0x0000000079A17D78 00003C (v01 SUPERM SMCI--MB 01072009 MSFT 00000097) [ 0.028490] ACPI: UEFI 0x0000000079A17DB8 000042 (v01 00000000 00000000) [ 0.028506] ACPI: DBG2 0x0000000079A17E00 000072 (v00 SUPERM SMCI--MB 00000000 INTL 20091013) [ 0.028522] ACPI: HPET 0x0000000079A17E78 000038 (v01 SUPERM SMCI--MB 00000001 INTL 20091013) [ 0.028538] ACPI: WDDT 0x0000000079A17EB0 000040 (v01 SUPERM SMCI--MB 00000000 INTL 20091013) [ 0.028554] ACPI: SSDT 0x0000000079A17EF0 00ED8B (v01 AMI PmMgt 00000001 INTL 20120913) [ 0.028570] ACPI: SSDT 0x0000000079A26C80 002285 (v02 SUPERM SpsNm 00000002 INTL 20120913) [ 0.028586] ACPI: SSDT 0x0000000079A28F08 000064 (v02 SUPERM SpsNvs 00000002 INTL 20120913) [ 0.028602] ACPI: PRAD 0x0000000079A28F70 000102 (v02 SUPERM SMCI--MB 00000002 INTL 20120913) [ 0.028617] ACPI: RMAD 0x0000000079A29078 0000CC (v01 SUPERM SMCI--MB 00000001 INTL 20091013) [ 0.028633] ACPI: HEST 0x0000000079A29148 0000A8 (v01 SUPERM SMCI--MB 00000001 INTL 00000001) [ 0.028649] ACPI: BERT 0x0000000079A291F0 000030 (v01 SUPERM SMCI--MB 00000001 INTL 00000001) [ 0.028669] ACPI: ERST 0x0000000079A29220 000230 (v01 SUPERM SMCI--MB 00000001 INTL 00000001) [ 0.028685] ACPI: EINJ 0x0000000079A29450 000130 (v01 SUPERM SMCI--MB 00000001 INTL 00000001) [ 0.028694] ACPI: Reserving FACP table memory at [mem 0x79a17ac0-0x79a17bcb] [ 0.028695] ACPI: Reserving DSDT table memory at [mem 0x799ff1e8-0x79a17abc] [ 0.028696] ACPI: Reserving FACS table memory at [mem 0x79e59f80-0x79e59fbf] [ 0.028697] ACPI: Reserving APIC table memory at [mem 0x79a17bd0-0x79a17c8b] [ 0.028698] ACPI: Reserving FPDT table memory at [mem 0x79a17c90-0x79a17cd3] [ 0.028699] ACPI: Reserving FIDT table memory at [mem 0x79a17cd8-0x79a17d73] [ 0.028700] ACPI: Reserving MCFG table memory at [mem 0x79a17d78-0x79a17db3] [ 0.028701] ACPI: Reserving UEFI table memory at [mem 0x79a17db8-0x79a17df9] [ 0.028702] ACPI: Reserving DBG2 table memory at [mem 0x79a17e00-0x79a17e71] [ 0.028703] ACPI: Reserving HPET table memory at [mem 0x79a17e78-0x79a17eaf] [ 0.028704] ACPI: Reserving WDDT table memory at [mem 0x79a17eb0-0x79a17eef] [ 0.028705] ACPI: Reserving SSDT table memory at [mem 0x79a17ef0-0x79a26c7a] [ 0.028706] ACPI: Reserving SSDT table memory at [mem 0x79a26c80-0x79a28f04] [ 0.028707] ACPI: Reserving SSDT table memory at [mem 0x79a28f08-0x79a28f6b] [ 0.028708] ACPI: Reserving PRAD table memory at [mem 0x79a28f70-0x79a29071] [ 0.028709] ACPI: Reserving RMAD table memory at [mem 0x79a29078-0x79a29143] [ 0.028710] ACPI: Reserving HEST table memory at [mem 0x79a29148-0x79a291ef] [ 0.028711] ACPI: Reserving BERT table memory at [mem 0x79a291f0-0x79a2921f] [ 0.028712] ACPI: Reserving ERST table memory at [mem 0x79a29220-0x79a2944f] [ 0.028713] ACPI: Reserving EINJ table memory at [mem 0x79a29450-0x79a2957f] [ 0.028758] Setting APIC routing to Xen PV. [ 0.032709] Zone ranges: [ 0.032710] DMA [mem 0x0000000000001000-0x0000000000ffffff] [ 0.032713] DMA32 [mem 0x0000000001000000-0x0000000020065fff] [ 0.032715] Normal empty [ 0.032716] Movable zone start for each node [ 0.032717] Early memory node ranges [ 0.032717] node 0: [mem 0x0000000000001000-0x0000000000099fff] [ 0.032719] node 0: [mem 0x0000000000100000-0x0000000020065fff] [ 0.032721] Initmem setup node 0 [mem 0x0000000000001000-0x0000000020065fff] [ 0.032726] On node 0, zone DMA: 1 pages in unavailable ranges [ 0.032763] On node 0, zone DMA: 102 pages in unavailable ranges [ 0.034309] On node 0, zone DMA32: 32666 pages in unavailable ranges [ 0.034315] p2m virtual area at (____ptrval____), size is 40000000 [ 0.221814] Remapped 102 page(s) [ 0.223191] ACPI: PM-Timer IO Port: 0x408 [ 0.223243] ACPI: LAPIC_NMI (acpi_id[0x00] high level lint[0x1]) [ 0.223246] ACPI: LAPIC_NMI (acpi_id[0x02] high level lint[0x1]) [ 0.223248] ACPI: LAPIC_NMI (acpi_id[0x04] high level lint[0x1]) [ 0.223249] ACPI: LAPIC_NMI (acpi_id[0x06] high level lint[0x1]) [ 0.223251] ACPI: LAPIC_NMI (acpi_id[0x01] high level lint[0x1]) [ 0.223252] ACPI: LAPIC_NMI (acpi_id[0x03] high level lint[0x1]) [ 0.223253] ACPI: LAPIC_NMI (acpi_id[0x05] high level lint[0x1]) [ 0.223255] ACPI: LAPIC_NMI (acpi_id[0x07] high level lint[0x1]) [ 0.223283] IOAPIC[0]: apic_id 8, version 32, address 0xfec00000, GSI 0-23 [ 0.223296] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl) [ 0.223300] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level) [ 0.223326] ACPI: Using ACPI (MADT) for SMP configuration information [ 0.223331] ACPI: HPET id: 0x8086a701 base: 0xfed00000 [ 0.223401] smpboot: Allowing 8 CPUs, 0 hotplug CPUs [ 0.223416] PM: hibernation: Registered nosave memory: [mem 0x00000000-0x00000fff] [ 0.223418] PM: hibernation: Registered nosave memory: [mem 0x0009a000-0x0009afff] [ 0.223419] PM: hibernation: Registered nosave memory: [mem 0x0009b000-0x000fffff] [ 0.223421] [mem 0x90000000-0xfbffbfff] available for PCI devices [ 0.223426] Booting kernel on Xen [ 0.223426] Xen version: 4.19-unstable (preserve-AD) [ 0.223429] clocksource: refined-jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 1910969940391419 ns [ 0.229656] setup_percpu: NR_CPUS:64 nr_cpumask_bits:8 nr_cpu_ids:8 nr_node_ids:1 [ 0.229942] percpu: Embedded 54 pages/cpu s180520 r8192 d32472 u262144 [ 0.229949] pcpu-alloc: s180520 r8192 d32472 u262144 alloc=1*2097152 [ 0.229952] pcpu-alloc: [0] 0 1 2 3 4 5 6 7 [ 0.230030] xen: PV spinlocks enabled [ 0.230033] PV qspinlock hash table entries: 256 (order: 0, 4096 bytes, linear) [ 0.230038] Built 1 zonelists, mobility grouping on. Total pages: 129006 [ 0.230040] Kernel command line: placeholder root=/dev/mapper/debina0--vg-root ro console=hvc0 [ 0.230078] Unknown kernel command line parameters "placeholder", will be passed to user space. [ 0.230087] random: crng init done [ 0.230136] Dentry cache hash table entries: 65536 (order: 7, 524288 bytes, linear) [ 0.230161] Inode-cache hash table entries: 32768 (order: 6, 262144 bytes, linear) [ 0.231482] mem auto-init: stack:all(zero), heap alloc:off, heap free:off [ 0.231484] software IO TLB: area num 8. [ 0.290881] Memory: 390032K/524284K available (14349K kernel code, 2682K rwdata, 4576K rodata, 1576K init, 1296K bss, 134000K reserved, 0K cma-reserved) [ 0.291049] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=8, Nodes=1 [ 0.293547] Dynamic Preempt: voluntary [ 0.293646] rcu: Preemptible hierarchical RCU implementation. [ 0.293647] rcu: RCU event tracing is enabled. [ 0.293648] rcu: RCU restricting CPUs from NR_CPUS=64 to nr_cpu_ids=8. [ 0.293649] Trampoline variant of Tasks RCU enabled. [ 0.293650] rcu: RCU calculated value of scheduler-enlistment delay is 100 jiffies. [ 0.293651] rcu: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=8 [ 0.304164] NR_IRQS: 4352, nr_irqs: 488, preallocated irqs: 16 [ 0.304289] xen:events: Using FIFO-based ABI [ 0.304313] xen: --> pirq=1 -> irq=1 (gsi=1) [ 0.304322] xen: --> pirq=2 -> irq=2 (gsi=2) [ 0.304329] xen: --> pirq=3 -> irq=3 (gsi=3) [ 0.304337] xen: --> pirq=4 -> irq=4 (gsi=4) [ 0.304344] xen: --> pirq=5 -> irq=5 (gsi=5) [ 0.304352] xen: --> pirq=6 -> irq=6 (gsi=6) [ 0.304359] xen: --> pirq=7 -> irq=7 (gsi=7) [ 0.304367] xen: --> pirq=8 -> irq=8 (gsi=8) [ 0.304374] xen: --> pirq=9 -> irq=9 (gsi=9) [ 0.304381] xen: --> pirq=10 -> irq=10 (gsi=10) [ 0.304389] xen: --> pirq=11 -> irq=11 (gsi=11) [ 0.304397] xen: --> pirq=12 -> irq=12 (gsi=12) [ 0.304404] xen: --> pirq=13 -> irq=13 (gsi=13) [ 0.304413] xen: --> pirq=14 -> irq=14 (gsi=14) [ 0.304421] xen: --> pirq=15 -> irq=15 (gsi=15) [ 0.304431] rcu: srcu_init: Setting srcu_struct sizes based on contention. [ 0.309786] Console: colour VGA+ 80x25 [ 0.324582] printk: console [tty0] enabled [ 0.325920] printk: console [hvc0] enabled [ 0.326062] ACPI: Core revision 20220331 [ 0.341563] clocksource: xen: mask: 0xffffffffffffffff max_cycles: 0x1cd42e4dffb, max_idle_ns: 881590591483 ns [ 0.341730] Xen: using vcpuop timer interface [ 0.341738] installing Xen timer for CPU 0 [ 0.341888] clocksource: tsc-early: mask: 0xffffffffffffffff max_cycles: 0x1fb63109b96, max_idle_ns: 440795265316 ns [ 0.342048] Calibrating delay loop (skipped), value calculated using timer frequency.. 4399.99 BogoMIPS (lpj=2199998) [ 0.342377] Last level iTLB entries: 4KB 64, 2MB 8, 4MB 8 [ 0.342495] Last level dTLB entries: 4KB 64, 2MB 0, 4MB 0, 1GB 4 [ 0.342622] Spectre V1 : Mitigation: usercopy/swapgs barriers and __user pointer sanitization [ 0.342771] Spectre V2 : Mitigation: Retpolines [ 0.343054] Spectre V2 : Spectre v2 / SpectreRSB mitigation: Filling RSB on context switch [ 0.343201] Spectre V2 : Spectre v2 / SpectreRSB : Filling RSB on VMEXIT [ 0.343320] Spectre V2 : Enabling Restricted Speculation for firmware calls [ 0.343442] Spectre V2 : mitigation: Enabling conditional Indirect Branch Prediction Barrier [ 0.343590] Spectre V2 : User space: Mitigation: STIBP via prctl [ 0.343709] Speculative Store Bypass: Mitigation: Speculative Store Bypass disabled via prctl [ 0.343861] MDS: Mitigation: Clear CPU buffers [ 0.343975] TAA: Mitigation: Clear CPU buffers [ 0.344051] MMIO Stale Data: Vulnerable: Clear CPU buffers attempted, no microcode [ 0.344217] x86/fpu: Supporting XSAVE feature 0x001: 'x87 floating point registers' [ 0.344366] x86/fpu: Supporting XSAVE feature 0x002: 'SSE registers' [ 0.344503] x86/fpu: Supporting XSAVE feature 0x004: 'AVX registers' [ 0.344622] x86/fpu: xstate_offset[2]: 576, xstate_sizes[2]: 256 [ 0.344742] x86/fpu: Enabled xstate features 0x7, context size is 832 bytes, using 'standard' format. [ 0.362488] Freeing SMP alternatives memory: 40K [ 0.362615] pid_max: default: 32768 minimum: 301 [ 0.363069] LSM: Security Framework initializing [ 0.363192] SELinux: Initializing. [ 0.363332] Mount-cache hash table entries: 1024 (order: 1, 8192 bytes, linear) [ 0.363484] Mountpoint-cache hash table entries: 1024 (order: 1, 8192 bytes, linear) [ 0.364138] cpu 0 spinlock event irq 25 [ 0.364258] VPMU disabled by hypervisor. [ 0.364691] cblist_init_generic: Setting adjustable number of callback queues. [ 0.364837] cblist_init_generic: Setting shift to 3 and lim to 1. [ 0.364995] Performance Events: unsupported p6 CPU model 86 no PMU driver, software events only. [ 0.365052] signal: max sigframe size: 1776 [ 0.365216] rcu: Hierarchical SRCU implementation. [ 0.365341] rcu: Max phase no-delay instances is 400. [ 0.365837] smp: Bringing up secondary CPUs ... [ 0.366173] installing Xen timer for CPU 1 [ 0.366645] cpu 1 spinlock event irq 35 [ 0.367188] MDS CPU bug present and SMT on, data leak possible. See https://www.kernel.org/doc/html/latest/admin-guide/hw-vuln/mds.html for more details. [ 0.367357] TAA CPU bug present and SMT on, data leak possible. See https://www.kernel.org/doc/html/latest/admin-guide/hw-vuln/tsx_async_abort.html for more details. [ 0.367546] MMIO Stale Data CPU bug present and SMT on, data leak possible. See https://www.kernel.org/doc/html/latest/admin-guide/hw-vuln/processor_mmio_stale_data.html for more details. [ 0.368269] installing Xen timer for CPU 2 [ 0.368738] cpu 2 spinlock event irq 41 [ 0.369165] installing Xen timer for CPU 3 [ 0.369606] cpu 3 spinlock event irq 47 [ 0.369606] installing Xen timer for CPU 4 [ 0.370387] cpu 4 spinlock event irq 53 [ 0.370387] installing Xen timer for CPU 5 [ 0.371242] cpu 5 spinlock event irq 59 [ 0.371253] installing Xen timer for CPU 6 [ 0.372090] cpu 6 spinlock event irq 65 [ 0.372301] installing Xen timer for CPU 7 [ 0.372731] cpu 7 spinlock event irq 71 [ 0.373299] smp: Brought up 1 node, 8 CPUs [ 0.373417] smpboot: Max logical packages: 1 [ 0.373635] devtmpfs: initialized [ 0.373635] x86/mm: Memory block size: 128MB [ 0.374287] ACPI: PM: Registering ACPI NVS region [mem 0x799b7000-0x79e5afff] (4866048 bytes) [ 0.374319] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 1911260446275000 ns [ 0.374476] futex hash table entries: 2048 (order: 5, 131072 bytes, linear) [ 0.374728] PM: RTC time: 10:56:39, date: 2024-06-25 [ 0.375184] NET: Registered PF_NETLINK/PF_ROUTE protocol family [ 0.375331] xen:grant_table: Grant tables using version 1 layout [ 0.375469] Grant table initialized [ 0.375772] audit: initializing netlink subsys (disabled) [ 0.375910] audit: type=2000 audit(1719312999.522:1): state=initialized audit_enabled=0 res=1 [ 0.376095] thermal_sys: Registered thermal governor 'step_wise' [ 0.376098] thermal_sys: Registered thermal governor 'user_space' [ 0.376248] ACPI FADT declares the system doesn't support PCIe ASPM, so disable it [ 0.376675] PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0x80000000-0x8fffffff] (base 0x80000000) [ 0.376831] PCI: MMCONFIG at [mem 0x80000000-0x8fffffff] reserved in E820 [ 0.504064] PCI: Using configuration type 1 for base access [ 0.506707] kprobes: kprobe jump-optimization is enabled. All kprobes are optimized if possible. [ 0.507123] ACPI: Added _OSI(Module Device) [ 0.507225] ACPI: Added _OSI(Processor Device) [ 0.507339] ACPI: Added _OSI(3.0 _SCP Extensions) [ 0.507453] ACPI: Added _OSI(Processor Aggregator Device) [ 0.537832] ACPI: 4 ACPI AML tables successfully acquired and loaded [ 0.539836] xen: registering gsi 9 triggering 0 polarity 0 [ 0.542332] ACPI: Dynamic OEM Table Load: [ 0.546046] ACPI: Interpreter enabled [ 0.546046] ACPI: PM: (supports S0 S4 S5) [ 0.546046] ACPI: Using IOAPIC for interrupt routing [ 0.547079] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug [ 0.547233] PCI: Using E820 reservations for host bridge windows [ 0.547803] ACPI: Enabled 6 GPEs in block 00 to 3F [ 0.574787] ACPI: PCI Root Bridge [UNC0] (domain 0000 [bus ff]) [ 0.574916] acpi PNP0A03:03: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI HPX-Type3] [ 0.575139] acpi PNP0A03:03: _OSC: platform does not support [LTR] [ 0.575592] acpi PNP0A03:03: _OSC: OS now controls [PME PCIeCapability] [ 0.575728] acpi PNP0A03:03: FADT indicates ASPM is unsupported, using BIOS configuration [ 0.575903] PCI host bridge to bus 0000:ff [ 0.576016] pci_bus 0000:ff: root bus resource [bus ff] [ 0.576310] pci 0000:ff:0b.0: [8086:6f81] type 00 class 0x088000 [ 0.576761] pci 0000:ff:0b.1: [8086:6f36] type 00 class 0x110100 [ 0.577222] pci 0000:ff:0b.2: [8086:6f37] type 00 class 0x110100 [ 0.577646] pci 0000:ff:0b.3: [8086:6f76] type 00 class 0x088000 [ 0.578120] pci 0000:ff:0c.0: [8086:6fe0] type 00 class 0x088000 [ 0.578577] pci 0000:ff:0c.1: [8086:6fe1] type 00 class 0x088000 [ 0.578577] pci 0000:ff:0c.2: [8086:6fe2] type 00 class 0x088000 [ 0.578657] pci 0000:ff:0c.3: [8086:6fe3] type 00 class 0x088000 [ 0.579046] pci 0000:ff:0f.0: [8086:6ff8] type 00 class 0x088000 [ 0.580158] pci 0000:ff:0f.4: [8086:6ffc] type 00 class 0x088000 [ 0.580582] pci 0000:ff:0f.5: [8086:6ffd] type 00 class 0x088000 [ 0.581289] pci 0000:ff:0f.6: [8086:6ffe] type 00 class 0x088000 [ 0.581726] pci 0000:ff:10.0: [8086:6f1d] type 00 class 0x088000 [ 0.582182] pci 0000:ff:10.1: [8086:6f34] type 00 class 0x110100 [ 0.582659] pci 0000:ff:10.5: [8086:6f1e] type 00 class 0x088000 [ 0.583087] pci 0000:ff:10.6: [8086:6f7d] type 00 class 0x110100 [ 0.583517] pci 0000:ff:10.7: [8086:6f1f] type 00 class 0x088000 [ 0.583972] pci 0000:ff:12.0: [8086:6fa0] type 00 class 0x088000 [ 0.584216] pci 0000:ff:12.1: [8086:6f30] type 00 class 0x110100 [ 0.584682] pci 0000:ff:13.0: [8086:6fa8] type 00 class 0x088000 [ 0.585193] pci 0000:ff:13.1: [8086:6f71] type 00 class 0x088000 [ 0.585662] pci 0000:ff:13.2: [8086:6faa] type 00 class 0x088000 [ 0.586130] pci 0000:ff:13.3: [8086:6fab] type 00 class 0x088000 [ 0.586649] pci 0000:ff:13.4: [8086:6fac] type 00 class 0x088000 [ 0.587124] pci 0000:ff:13.5: [8086:6fad] type 00 class 0x088000 [ 0.587609] pci 0000:ff:13.6: [8086:6fae] type 00 class 0x088000 [ 0.588066] pci 0000:ff:13.7: [8086:6faf] type 00 class 0x088000 [ 0.588531] pci 0000:ff:14.0: [8086:6fb0] type 00 class 0x088000 [ 0.589002] pci 0000:ff:14.1: [8086:6fb1] type 00 class 0x088000 [ 0.589429] pci 0000:ff:14.2: [8086:6fb2] type 00 class 0x088000 [ 0.589900] pci 0000:ff:14.3: [8086:6fb3] type 00 class 0x088000 [ 0.590398] pci 0000:ff:14.4: [8086:6fbc] type 00 class 0x088000 [ 0.590825] pci 0000:ff:14.5: [8086:6fbd] type 00 class 0x088000 [ 0.591260] pci 0000:ff:14.6: [8086:6fbe] type 00 class 0x088000 [ 0.591695] pci 0000:ff:14.7: [8086:6fbf] type 00 class 0x088000 [ 0.592156] pci 0000:ff:15.0: [8086:6fb4] type 00 class 0x088000 [ 0.592630] pci 0000:ff:15.1: [8086:6fb5] type 00 class 0x088000 [ 0.593102] pci 0000:ff:15.2: [8086:6fb6] type 00 class 0x088000 [ 0.593610] pci 0000:ff:15.3: [8086:6fb7] type 00 class 0x088000 [ 0.594127] pci 0000:ff:1e.0: [8086:6f98] type 00 class 0x088000 [ 0.594577] pci 0000:ff:1e.1: [8086:6f99] type 00 class 0x088000 [ 0.595000] pci 0000:ff:1e.2: [8086:6f9a] type 00 class 0x088000 [ 0.595362] pci 0000:ff:1e.3: [8086:6fc0] type 00 class 0x088000 [ 0.595611] pci 0000:ff:1e.4: [8086:6f9c] type 00 class 0x088000 [ 0.596079] pci 0000:ff:1f.0: [8086:6f88] type 00 class 0x088000 [ 0.596508] pci 0000:ff:1f.2: [8086:6f8a] type 00 class 0x088000 [ 0.596934] pci_bus 0000:ff: on NUMA node 0 [ 0.601357] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-fe]) [ 0.601490] acpi PNP0A08:00: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI HPX-Type3] [ 0.601768] acpi PNP0A08:00: _OSC: platform does not support [PME LTR] [ 0.602115] acpi PNP0A08:00: _OSC: OS now controls [PCIeCapability] [ 0.602236] acpi PNP0A08:00: FADT indicates ASPM is unsupported, using BIOS configuration [ 0.602729] PCI host bridge to bus 0000:00 [ 0.602843] pci_bus 0000:00: root bus resource [io 0x0000-0x0cf7 window] [ 0.602965] pci_bus 0000:00: root bus resource [io 0x1000-0xffff window] [ 0.603051] pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff window] [ 0.603196] pci_bus 0000:00: root bus resource [mem 0x90000000-0xfbffbfff window] [ 0.603341] pci_bus 0000:00: root bus resource [bus 00-fe] [ 0.603522] pci 0000:00:00.0: [8086:6f00] type 00 class 0x060000 [ 0.604178] pci 0000:00:01.0: [8086:6f02] type 01 class 0x060400 [ 0.604700] pci 0000:00:01.0: PME# supported from D0 D3hot D3cold [ 0.605072] pci 0000:00:01.1: [8086:6f03] type 01 class 0x060400 [ 0.605620] pci 0000:00:01.1: PME# supported from D0 D3hot D3cold [ 0.606010] pci 0000:00:02.0: [8086:6f04] type 01 class 0x060400 [ 0.606448] pci 0000:00:02.0: PME# supported from D0 D3hot D3cold [ 0.606811] pci 0000:00:02.2: [8086:6f06] type 01 class 0x060400 [ 0.607326] pci 0000:00:02.2: PME# supported from D0 D3hot D3cold [ 0.607703] pci 0000:00:03.0: [8086:6f08] type 01 class 0x060400 [ 0.608254] pci 0000:00:03.0: PME# supported from D0 D3hot D3cold [ 0.608625] pci 0000:00:03.2: [8086:6f0a] type 01 class 0x060400 [ 0.609148] pci 0000:00:03.2: PME# supported from D0 D3hot D3cold [ 0.609540] pci 0000:00:05.0: [8086:6f28] type 00 class 0x088000 [ 0.610120] pci 0000:00:05.1: [8086:6f29] type 00 class 0x088000 [ 0.610745] pci 0000:00:05.2: [8086:6f2a] type 00 class 0x088000 [ 0.611455] pci 0000:00:14.0: [8086:8c31] type 00 class 0x0c0330 [ 0.611673] pci 0000:00:14.0: reg 0x10: [mem 0xfb600000-0xfb60ffff 64bit] [ 0.612137] pci 0000:00:14.0: PME# supported from D3hot D3cold [ 0.612509] pci 0000:00:16.0: [8086:8c3a] type 00 class 0x078000 [ 0.612727] pci 0000:00:16.0: reg 0x10: [mem 0xfb617000-0xfb61700f 64bit] [ 0.613192] pci 0000:00:16.0: PME# supported from D0 D3hot D3cold [ 0.613496] pci 0000:00:16.1: [8086:8c3b] type 00 class 0x078000 [ 0.613745] pci 0000:00:16.1: reg 0x10: [mem 0xfb616000-0xfb61600f 64bit] [ 0.614210] pci 0000:00:16.1: PME# supported from D0 D3hot D3cold [ 0.614570] pci 0000:00:1a.0: [8086:8c2d] type 00 class 0x0c0320 [ 0.614767] pci 0000:00:1a.0: reg 0x10: [mem 0xfb614000-0xfb6143ff] [ 0.615332] pci 0000:00:1a.0: PME# supported from D0 D3hot D3cold [ 0.615650] pci 0000:00:1c.0: [8086:8c10] type 01 class 0x060400 [ 0.616201] pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold [ 0.616428] pci 0000:00:1c.0: Enabling MPC IRBNCE [ 0.616551] pci 0000:00:1c.0: Intel PCH root port ACS workaround enabled [ 0.624235] pci 0000:00:1c.1: [8086:8c12] type 01 class 0x060400 [ 0.624817] pci 0000:00:1c.1: PME# supported from D0 D3hot D3cold [ 0.625015] pci 0000:00:1c.1: Enabling MPC IRBNCE [ 0.625059] pci 0000:00:1c.1: Intel PCH root port ACS workaround enabled [ 0.625350] pci 0000:00:1c.3: [8086:8c16] type 01 class 0x060400 [ 0.625932] pci 0000:00:1c.3: PME# supported from D0 D3hot D3cold [ 0.626126] pci 0000:00:1c.3: Enabling MPC IRBNCE [ 0.626249] pci 0000:00:1c.3: Intel PCH root port ACS workaround enabled [ 0.626537] pci 0000:00:1c.4: [8086:8c18] type 01 class 0x060400 [ 0.627092] pci 0000:00:1c.4: PME# supported from D0 D3hot D3cold [ 0.627311] pci 0000:00:1c.4: Enabling MPC IRBNCE [ 0.627433] pci 0000:00:1c.4: Intel PCH root port ACS workaround enabled [ 0.627756] pci 0000:00:1d.0: [8086:8c26] type 00 class 0x0c0320 [ 0.627954] pci 0000:00:1d.0: reg 0x10: [mem 0xfb613000-0xfb6133ff] [ 0.628467] pci 0000:00:1d.0: PME# supported from D0 D3hot D3cold [ 0.628819] pci 0000:00:1f.0: [8086:8c54] type 00 class 0x060100 [ 0.629575] pci 0000:00:1f.2: [8086:8c02] type 00 class 0x010601 [ 0.629770] pci 0000:00:1f.2: reg 0x10: [io 0xf070-0xf077] [ 0.629961] pci 0000:00:1f.2: reg 0x14: [io 0xf060-0xf063] [ 0.630092] pci 0000:00:1f.2: reg 0x18: [io 0xf050-0xf057] [ 0.630250] pci 0000:00:1f.2: reg 0x1c: [io 0xf040-0xf043] [ 0.630408] pci 0000:00:1f.2: reg 0x20: [io 0xf020-0xf03f] [ 0.630569] pci 0000:00:1f.2: reg 0x24: [mem 0xfb612000-0xfb6127ff] [ 0.630881] pci 0000:00:1f.2: PME# supported from D3hot [ 0.631166] pci 0000:00:1f.3: [8086:8c22] type 00 class 0x0c0500 [ 0.631413] pci 0000:00:1f.3: reg 0x10: [mem 0xfb611000-0xfb6110ff 64bit] [ 0.631659] pci 0000:00:1f.3: reg 0x20: [io 0xf000-0xf01f] [ 0.632036] pci 0000:00:1f.6: [8086:8c24] type 00 class 0x118000 [ 0.632036] pci 0000:00:1f.6: reg 0x10: [mem 0xfb610000-0xfb610fff 64bit] [ 0.632036] pci 0000:00:01.0: PCI bridge to [bus 01] [ 0.632046] pci 0000:00:01.1: PCI bridge to [bus 02] [ 0.632046] pci 0000:03:00.0: [8086:6f50] type 00 class 0x088000 [ 0.632046] pci 0000:03:00.0: reg 0x10: [mem 0xfb506000-0xfb507fff 64bit] [ 0.633623] pci 0000:03:00.1: [8086:6f51] type 00 class 0x088000 [ 0.633837] pci 0000:03:00.1: reg 0x10: [mem 0xfb504000-0xfb505fff 64bit] [ 0.634573] pci 0000:03:00.2: [8086:6f52] type 00 class 0x088000 [ 0.634787] pci 0000:03:00.2: reg 0x10: [mem 0xfb502000-0xfb503fff 64bit] [ 0.635497] pci 0000:03:00.3: [8086:6f53] type 00 class 0x088000 [ 0.635710] pci 0000:03:00.3: reg 0x10: [mem 0xfb500000-0xfb501fff 64bit] [ 0.636448] pci 0000:00:02.0: PCI bridge to [bus 03] [ 0.636583] pci 0000:00:02.0: bridge window [mem 0xfb500000-0xfb5fffff] [ 0.636924] pci 0000:04:00.0: [8086:15ac] type 00 class 0x020000 [ 0.637166] pci 0000:04:00.0: reg 0x10: [mem 0xfbc00000-0xfbdfffff 64bit pref] [ 0.637452] pci 0000:04:00.0: reg 0x20: [mem 0xfbe04000-0xfbe07fff 64bit pref] [ 0.637637] pci 0000:04:00.0: reg 0x30: [mem 0xfb480000-0xfb4fffff pref] [ 0.637988] pci 0000:04:00.0: PME# supported from D0 D3hot D3cold [ 0.638152] pci 0000:04:00.0: reg 0x184: [mem 0x00000000-0x00003fff 64bit] [ 0.638274] pci 0000:04:00.0: VF(n) BAR0 space: [mem 0x00000000-0x000fffff 64bit] (contains BAR0 for 64 VFs) [ 0.638511] pci 0000:04:00.0: reg 0x190: [mem 0x00000000-0x00003fff 64bit] [ 0.638632] pci 0000:04:00.0: VF(n) BAR3 space: [mem 0x00000000-0x000fffff 64bit] (contains BAR3 for 64 VFs) [ 0.639206] pci 0000:04:00.1: [8086:15ac] type 00 class 0x020000 [ 0.639420] pci 0000:04:00.1: reg 0x10: [mem 0xfba00000-0xfbbfffff 64bit pref] [ 0.639711] pci 0000:04:00.1: reg 0x20: [mem 0xfbe00000-0xfbe03fff 64bit pref] [ 0.639921] pci 0000:04:00.1: reg 0x30: [mem 0xfb400000-0xfb47ffff pref] [ 0.640274] pci 0000:04:00.1: PME# supported from D0 D3hot D3cold [ 0.640478] pci 0000:04:00.1: reg 0x184: [mem 0x00000000-0x00003fff 64bit] [ 0.640599] pci 0000:04:00.1: VF(n) BAR0 space: [mem 0x00000000-0x000fffff 64bit] (contains BAR0 for 64 VFs) [ 0.640803] pci 0000:04:00.1: reg 0x190: [mem 0x00000000-0x00003fff 64bit] [ 0.640924] pci 0000:04:00.1: VF(n) BAR3 space: [mem 0x00000000-0x000fffff 64bit] (contains BAR3 for 64 VFs) [ 0.641474] pci 0000:00:02.2: PCI bridge to [bus 04] [ 0.641610] pci 0000:00:02.2: bridge window [mem 0xfb400000-0xfb4fffff] [ 0.641748] pci 0000:00:02.2: bridge window [mem 0xfba00000-0xfbefffff 64bit pref] [ 0.642038] pci 0000:00:03.0: PCI bridge to [bus 05] [ 0.642337] pci 0000:00:03.2: PCI bridge to [bus 06] [ 0.642725] pci 0000:07:00.0: working around ROM BAR overlap defect [ 0.642846] pci 0000:07:00.0: [8086:1533] type 00 class 0x020000 [ 0.643050] pci 0000:07:00.0: reg 0x10: [mem 0xfb300000-0xfb37ffff] [ 0.643267] pci 0000:07:00.0: reg 0x18: [io 0xe000-0xe01f] [ 0.643433] pci 0000:07:00.0: reg 0x1c: [mem 0xfb380000-0xfb383fff] [ 0.643990] pci 0000:07:00.0: PME# supported from D0 D3hot D3cold [ 0.644394] pci 0000:00:1c.0: PCI bridge to [bus 07] [ 0.644521] pci 0000:00:1c.0: bridge window [io 0xe000-0xefff] [ 0.644649] pci 0000:00:1c.0: bridge window [mem 0xfb300000-0xfb3fffff] [ 0.645006] pci 0000:08:00.0: working around ROM BAR overlap defect [ 0.645051] pci 0000:08:00.0: [8086:1533] type 00 class 0x020000 [ 0.645289] pci 0000:08:00.0: reg 0x10: [mem 0xfb200000-0xfb27ffff] [ 0.645506] pci 0000:08:00.0: reg 0x18: [io 0xd000-0xd01f] [ 0.645671] pci 0000:08:00.0: reg 0x1c: [mem 0xfb280000-0xfb283fff] [ 0.646202] pci 0000:08:00.0: PME# supported from D0 D3hot D3cold [ 0.646678] pci 0000:00:1c.1: PCI bridge to [bus 08] [ 0.646804] pci 0000:00:1c.1: bridge window [io 0xd000-0xdfff] [ 0.646932] pci 0000:00:1c.1: bridge window [mem 0xfb200000-0xfb2fffff] [ 0.647271] pci 0000:09:00.0: [1a03:1150] type 01 class 0x060400 [ 0.647664] pci 0000:09:00.0: enabling Extended Tags [ 0.648029] pci 0000:09:00.0: supports D1 D2 [ 0.648050] pci 0000:09:00.0: PME# supported from D0 D1 D2 D3hot D3cold [ 0.648408] pci 0000:00:1c.3: PCI bridge to [bus 09-0a] [ 0.648535] pci 0000:00:1c.3: bridge window [io 0xc000-0xcfff] [ 0.648664] pci 0000:00:1c.3: bridge window [mem 0xfa000000-0xfb0fffff] [ 0.648966] pci_bus 0000:0a: extended config space not accessible [ 0.649107] pci 0000:0a:00.0: [1a03:2000] type 00 class 0x030000 [ 0.649345] pci 0000:0a:00.0: reg 0x10: [mem 0xfa000000-0xfaffffff] [ 0.649512] pci 0000:0a:00.0: reg 0x14: [mem 0xfb000000-0xfb01ffff] [ 0.649679] pci 0000:0a:00.0: reg 0x18: [io 0xc000-0xc07f] [ 0.650033] pci 0000:0a:00.0: Video device with shadowed ROM at [mem 0x000c0000-0x000dffff] [ 0.650193] pci 0000:0a:00.0: supports D1 D2 [ 0.650307] pci 0000:0a:00.0: PME# supported from D0 D1 D2 D3hot D3cold [ 0.650775] pci 0000:09:00.0: PCI bridge to [bus 0a] [ 0.650914] pci 0000:09:00.0: bridge window [io 0xc000-0xcfff] [ 0.651044] pci 0000:09:00.0: bridge window [mem 0xfa000000-0xfb0fffff] [ 0.651429] pci 0000:0b:00.0: [8086:1521] type 00 class 0x020000 [ 0.651629] pci 0000:0b:00.0: reg 0x10: [mem 0xfb160000-0xfb17ffff] [ 0.651867] pci 0000:0b:00.0: reg 0x18: [io 0xb060-0xb07f] [ 0.652029] pci 0000:0b:00.0: reg 0x1c: [mem 0xfb18c000-0xfb18ffff] [ 0.652446] pci 0000:0b:00.0: PME# supported from D0 D3hot D3cold [ 0.652681] pci 0000:0b:00.0: reg 0x184: [mem 0x00000000-0x00003fff 64bit pref] [ 0.652826] pci 0000:0b:00.0: VF(n) BAR0 space: [mem 0x00000000-0x0001ffff 64bit pref] (contains BAR0 for 8 VFs) [ 0.653071] pci 0000:0b:00.0: reg 0x190: [mem 0x00000000-0x00003fff 64bit pref] [ 0.653216] pci 0000:0b:00.0: VF(n) BAR3 space: [mem 0x00000000-0x0001ffff 64bit pref] (contains BAR3 for 8 VFs) [ 0.653774] pci 0000:0b:00.1: [8086:1521] type 00 class 0x020000 [ 0.653976] pci 0000:0b:00.1: reg 0x10: [mem 0xfb140000-0xfb15ffff] [ 0.654140] pci 0000:0b:00.1: reg 0x18: [io 0xb040-0xb05f] [ 0.654302] pci 0000:0b:00.1: reg 0x1c: [mem 0xfb188000-0xfb18bfff] [ 0.654836] pci 0000:0b:00.1: PME# supported from D0 D3hot D3cold [ 0.655068] pci 0000:0b:00.1: reg 0x184: [mem 0x00000000-0x00003fff 64bit pref] [ 0.655214] pci 0000:0b:00.1: VF(n) BAR0 space: [mem 0x00000000-0x0001ffff 64bit pref] (contains BAR0 for 8 VFs) [ 0.655432] pci 0000:0b:00.1: reg 0x190: [mem 0x00000000-0x00003fff 64bit pref] [ 0.655576] pci 0000:0b:00.1: VF(n) BAR3 space: [mem 0x00000000-0x0001ffff 64bit pref] (contains BAR3 for 8 VFs) [ 0.656129] pci 0000:0b:00.2: [8086:1521] type 00 class 0x020000 [ 0.656330] pci 0000:0b:00.2: reg 0x10: [mem 0xfb120000-0xfb13ffff] [ 0.656540] pci 0000:0b:00.2: reg 0x18: [io 0xb020-0xb03f] [ 0.656702] pci 0000:0b:00.2: reg 0x1c: [mem 0xfb184000-0xfb187fff] [ 0.657238] pci 0000:0b:00.2: PME# supported from D0 D3hot D3cold [ 0.657468] pci 0000:0b:00.2: reg 0x184: [mem 0x00000000-0x00003fff 64bit pref] [ 0.657613] pci 0000:0b:00.2: VF(n) BAR0 space: [mem 0x00000000-0x0001ffff 64bit pref] (contains BAR0 for 8 VFs) [ 0.657830] pci 0000:0b:00.2: reg 0x190: [mem 0x00000000-0x00003fff 64bit pref] [ 0.657975] pci 0000:0b:00.2: VF(n) BAR3 space: [mem 0x00000000-0x0001ffff 64bit pref] (contains BAR3 for 8 VFs) [ 0.658427] pci 0000:0b:00.3: [8086:1521] type 00 class 0x020000 [ 0.658649] pci 0000:0b:00.3: reg 0x10: [mem 0xfb100000-0xfb11ffff] [ 0.658859] pci 0000:0b:00.3: reg 0x18: [io 0xb000-0xb01f] [ 0.659020] pci 0000:0b:00.3: reg 0x1c: [mem 0xfb180000-0xfb183fff] [ 0.659442] pci 0000:0b:00.3: PME# supported from D0 D3hot D3cold [ 0.659671] pci 0000:0b:00.3: reg 0x184: [mem 0x00000000-0x00003fff 64bit pref] [ 0.659849] pci 0000:0b:00.3: VF(n) BAR0 space: [mem 0x00000000-0x0001ffff 64bit pref] (contains BAR0 for 8 VFs) [ 0.660069] pci 0000:0b:00.3: reg 0x190: [mem 0x00000000-0x00003fff 64bit pref] [ 0.660214] pci 0000:0b:00.3: VF(n) BAR3 space: [mem 0x00000000-0x0001ffff 64bit pref] (contains BAR3 for 8 VFs) [ 0.660794] pci 0000:00:1c.4: PCI bridge to [bus 0b] [ 0.660920] pci 0000:00:1c.4: bridge window [io 0xb000-0xbfff] [ 0.661050] pci 0000:00:1c.4: bridge window [mem 0xfb100000-0xfb1fffff] [ 0.661222] pci 0000:00:1c.4: bridge has subordinate 0b but max busn 0c [ 0.661691] pci_bus 0000:00: on NUMA node 0 [ 0.661787] xen: registering gsi 13 triggering 1 polarity 0 [ 0.662772] ACPI: PCI: Interrupt link LNKA configured for IRQ 11 [ 0.662969] ACPI: PCI: Interrupt link LNKB configured for IRQ 10 [ 0.663125] ACPI: PCI: Interrupt link LNKC configured for IRQ 5 [ 0.663317] ACPI: PCI: Interrupt link LNKD configured for IRQ 11 [ 0.663507] ACPI: PCI: Interrupt link LNKE configured for IRQ 0 [ 0.663626] ACPI: PCI: Interrupt link LNKE disabled [ 0.663824] ACPI: PCI: Interrupt link LNKF configured for IRQ 0 [ 0.663943] ACPI: PCI: Interrupt link LNKF disabled [ 0.664124] ACPI: PCI: Interrupt link LNKG configured for IRQ 0 [ 0.664243] ACPI: PCI: Interrupt link LNKG disabled [ 0.664427] ACPI: PCI: Interrupt link LNKH configured for IRQ 0 [ 0.664546] ACPI: PCI: Interrupt link LNKH disabled [ 0.664804] xen:balloon: Initialising balloon driver [ 0.665150] iommu: Default domain type: Translated [ 0.673051] iommu: DMA domain TLB invalidation policy: lazy mode [ 0.673236] SCSI subsystem initialized [ 0.673364] libata version 3.00 loaded. [ 0.673364] ACPI: bus type USB registered [ 0.673364] usbcore: registered new interface driver usbfs [ 0.673368] usbcore: registered new interface driver hub [ 0.673490] usbcore: registered new device driver usb [ 0.674062] pps_core: LinuxPPS API ver. 1 registered [ 0.674177] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti [ 0.674328] PTP clock support registered [ 0.674464] Advanced Linux Sound Architecture Driver Initialized. [ 0.674464] NetLabel: Initializing [ 0.674464] NetLabel: domain hash size = 128 [ 0.675051] NetLabel: protocols = UNLABELED CIPSOv4 CALIPSO [ 0.675184] NetLabel: unlabeled traffic allowed by default [ 0.675324] PCI: Using ACPI for IRQ routing [ 0.710345] PCI: pci_cache_line_size set to 64 bytes [ 0.711125] e820: reserve RAM buffer [mem 0x0009a000-0x0009ffff] [ 0.711127] e820: reserve RAM buffer [mem 0x20066000-0x23ffffff] [ 0.711148] pci 0000:0a:00.0: vgaarb: setting as boot VGA device [ 0.711209] pci 0000:0a:00.0: vgaarb: bridge control possible [ 0.711327] pci 0000:0a:00.0: vgaarb: VGA device added: decodes=io+mem,owns=io+mem,locks=none [ 0.711509] vgaarb: loaded [ 0.713466] clocksource: Switched to clocksource tsc-early [ 0.714077] VFS: Disk quotas dquot_6.6.0 [ 0.714077] VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes) [ 0.714077] hugetlbfs: disabling because there are no supported hugepage sizes [ 0.714723] pnp: PnP ACPI init [ 0.715242] xen: registering gsi 8 triggering 1 polarity 0 [ 0.715437] system 00:01: [io 0x0500-0x057f] has been reserved [ 0.715565] system 00:01: [io 0x0400-0x047f] has been reserved [ 0.715685] system 00:01: [io 0x0580-0x059f] has been reserved [ 0.715803] system 00:01: [io 0x0600-0x061f] has been reserved [ 0.715922] system 00:01: [io 0x0880-0x0883] has been reserved [ 0.716040] system 00:01: [io 0x0800-0x081f] has been reserved [ 0.716187] system 00:01: [mem 0xfed1c000-0xfed3ffff] could not be reserved [ 0.716342] system 00:01: [mem 0xfed45000-0xfed8bfff] has been reserved [ 0.716462] system 00:01: [mem 0xff000000-0xffffffff] has been reserved [ 0.716583] system 00:01: [mem 0xfee00000-0xfeefffff] has been reserved [ 0.716703] system 00:01: [mem 0xfed12000-0xfed1200f] has been reserved [ 0.716824] system 00:01: [mem 0xfed12010-0xfed1201f] has been reserved [ 0.716944] system 00:01: [mem 0xfed1b000-0xfed1bfff] has been reserved [ 0.717380] system 00:02: [io 0x0a00-0x0a0f] has been reserved [ 0.717505] system 00:02: [io 0x0a10-0x0a1f] has been reserved [ 0.717623] system 00:02: [io 0x0a20-0x0a2f] has been reserved [ 0.717774] system 00:02: [io 0x0a30-0x0a3f] has been reserved [ 0.717893] system 00:02: [io 0x0a40-0x0a4f] has been reserved [ 0.718336] xen: registering gsi 4 triggering 1 polarity 0 [ 0.718342] Already setup the GSI :4 [ 0.718455] pnp 00:03: [dma 0 disabled] [ 0.718765] xen: registering gsi 3 triggering 1 polarity 0 [ 0.718777] pnp 00:04: [dma 0 disabled] [ 0.719411] pnp: PnP ACPI: found 5 devices [ 0.751805] PM-Timer failed consistency check (0xffffff) - aborting. [ 0.751999] NET: Registered PF_INET protocol family [ 0.752190] IP idents hash table entries: 8192 (order: 4, 65536 bytes, linear) [ 0.752596] tcp_listen_portaddr_hash hash table entries: 256 (order: 0, 4096 bytes, linear) [ 0.752748] Table-perturb hash table entries: 65536 (order: 6, 262144 bytes, linear) [ 0.752896] TCP established hash table entries: 4096 (order: 3, 32768 bytes, linear) [ 0.753081] TCP bind hash table entries: 4096 (order: 5, 131072 bytes, linear) [ 0.753275] TCP: Hash tables configured (established 4096 bind 4096) [ 0.753446] UDP hash table entries: 256 (order: 1, 8192 bytes, linear) [ 0.753569] UDP-Lite hash table entries: 256 (order: 1, 8192 bytes, linear) [ 0.753762] NET: Registered PF_UNIX/PF_LOCAL protocol family [ 0.754170] RPC: Registered named UNIX socket transport module. [ 0.754297] RPC: Registered udp transport module. [ 0.754410] RPC: Registered tcp transport module. [ 0.754524] RPC: Registered tcp NFSv4.1 backchannel transport module. [ 0.755045] pci 0000:00:1c.4: bridge window [mem 0x00100000-0x000fffff 64bit pref] to [bus 0b] add_size 100000 add_align 100000 [ 0.755247] clipped [mem size 0x00000000 64bit pref] to [mem size 0xfffffffffffa0000 64bit pref] for e820 entry [mem 0x0009ac00-0x000fffff] [ 0.755411] clipped [mem size 0x00020000 64bit pref] to [mem size 0xfffffffffffc0000 64bit pref] for e820 entry [mem 0x0009ac00-0x000fffff] [ 0.755573] pci 0000:00:1c.4: BAR 15: assigned [mem 0x90000000-0x900fffff 64bit pref] [ 0.755720] pci 0000:00:01.0: PCI bridge to [bus 01] [ 0.755896] pci 0000:00:01.1: PCI bridge to [bus 02] [ 0.756081] pci 0000:00:02.0: PCI bridge to [bus 03] [ 0.756231] pci 0000:00:02.0: bridge window [mem 0xfb500000-0xfb5fffff] [ 0.756396] pci 0000:04:00.0: BAR 7: no space for [mem size 0x00100000 64bit] [ 0.756525] pci 0000:04:00.0: BAR 7: failed to assign [mem size 0x00100000 64bit] [ 0.756677] pci 0000:04:00.0: BAR 10: no space for [mem size 0x00100000 64bit] [ 0.756821] pci 0000:04:00.0: BAR 10: failed to assign [mem size 0x00100000 64bit] [ 0.756966] pci 0000:04:00.1: BAR 7: no space for [mem size 0x00100000 64bit] [ 0.757114] pci 0000:04:00.1: BAR 7: failed to assign [mem size 0x00100000 64bit] [ 0.757271] pci 0000:04:00.1: BAR 10: no space for [mem size 0x00100000 64bit] [ 0.757415] pci 0000:04:00.1: BAR 10: failed to assign [mem size 0x00100000 64bit] [ 0.757561] pci 0000:04:00.0: BAR 7: no space for [mem size 0x00100000 64bit] [ 0.757684] pci 0000:04:00.0: BAR 7: failed to assign [mem size 0x00100000 64bit] [ 0.757829] pci 0000:04:00.0: BAR 10: no space for [mem size 0x00100000 64bit] [ 0.757976] pci 0000:04:00.0: BAR 10: failed to assign [mem size 0x00100000 64bit] [ 0.758135] pci 0000:04:00.1: BAR 7: no space for [mem size 0x00100000 64bit] [ 0.758258] pci 0000:04:00.1: BAR 7: failed to assign [mem size 0x00100000 64bit] [ 0.758403] pci 0000:04:00.1: BAR 10: no space for [mem size 0x00100000 64bit] [ 0.758547] pci 0000:04:00.1: BAR 10: failed to assign [mem size 0x00100000 64bit] [ 0.758692] pci 0000:00:02.2: PCI bridge to [bus 04] [ 0.758827] pci 0000:00:02.2: bridge window [mem 0xfb400000-0xfb4fffff] [ 0.758961] pci 0000:00:02.2: bridge window [mem 0xfba00000-0xfbefffff 64bit pref] [ 0.759158] pci 0000:00:03.0: PCI bridge to [bus 05] [ 0.759341] pci 0000:00:03.2: PCI bridge to [bus 06] [ 0.759514] pci 0000:00:1c.0: PCI bridge to [bus 07] [ 0.759635] pci 0000:00:1c.0: bridge window [io 0xe000-0xefff] [ 0.759774] pci 0000:00:1c.0: bridge window [mem 0xfb300000-0xfb3fffff] [ 0.759936] pci 0000:00:1c.1: PCI bridge to [bus 08] [ 0.760067] pci 0000:00:1c.1: bridge window [io 0xd000-0xdfff] [ 0.760218] pci 0000:00:1c.1: bridge window [mem 0xfb200000-0xfb2fffff] [ 0.760383] pci 0000:09:00.0: PCI bridge to [bus 0a] [ 0.760504] pci 0000:09:00.0: bridge window [io 0xc000-0xcfff] [ 0.760645] pci 0000:09:00.0: bridge window [mem 0xfa000000-0xfb0fffff] [ 0.760843] pci 0000:00:1c.3: PCI bridge to [bus 09-0a] [ 0.760964] pci 0000:00:1c.3: bridge window [io 0xc000-0xcfff] [ 0.761127] pci 0000:00:1c.3: bridge window [mem 0xfa000000-0xfb0fffff] [ 0.761302] pci 0000:0b:00.0: BAR 7: assigned [mem 0x90000000-0x9001ffff 64bit pref] [ 0.761460] pci 0000:0b:00.0: BAR 10: assigned [mem 0x90020000-0x9003ffff 64bit pref] [ 0.761614] pci 0000:0b:00.1: BAR 7: assigned [mem 0x90040000-0x9005ffff 64bit pref] [ 0.761767] pci 0000:0b:00.1: BAR 10: assigned [mem 0x90060000-0x9007ffff 64bit pref] [ 0.761920] pci 0000:0b:00.2: BAR 7: assigned [mem 0x90080000-0x9009ffff 64bit pref] [ 0.762094] pci 0000:0b:00.2: BAR 10: assigned [mem 0x900a0000-0x900bffff 64bit pref] [ 0.762264] pci 0000:0b:00.3: BAR 7: assigned [mem 0x900c0000-0x900dffff 64bit pref] [ 0.762419] pci 0000:0b:00.3: BAR 10: assigned [mem 0x900e0000-0x900fffff 64bit pref] [ 0.762573] pci 0000:00:1c.4: PCI bridge to [bus 0b] [ 0.762693] pci 0000:00:1c.4: bridge window [io 0xb000-0xbfff] [ 0.762832] pci 0000:00:1c.4: bridge window [mem 0xfb100000-0xfb1fffff] [ 0.762966] pci 0000:00:1c.4: bridge window [mem 0x90000000-0x900fffff 64bit pref] [ 0.763169] pci_bus 0000:00: Some PCI device resources are unassigned, try booting with pci=realloc [ 0.763321] pci_bus 0000:00: resource 4 [io 0x0000-0x0cf7 window] [ 0.763444] pci_bus 0000:00: resource 5 [io 0x1000-0xffff window] [ 0.763581] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff window] [ 0.763702] pci_bus 0000:00: resource 7 [mem 0x90000000-0xfbffbfff window] [ 0.763823] pci_bus 0000:03: resource 1 [mem 0xfb500000-0xfb5fffff] [ 0.763942] pci_bus 0000:04: resource 1 [mem 0xfb400000-0xfb4fffff] [ 0.764072] pci_bus 0000:04: resource 2 [mem 0xfba00000-0xfbefffff 64bit pref] [ 0.764231] pci_bus 0000:07: resource 0 [io 0xe000-0xefff] [ 0.764350] pci_bus 0000:07: resource 1 [mem 0xfb300000-0xfb3fffff] [ 0.764469] pci_bus 0000:08: resource 0 [io 0xd000-0xdfff] [ 0.764585] pci_bus 0000:08: resource 1 [mem 0xfb200000-0xfb2fffff] [ 0.764707] pci_bus 0000:09: resource 0 [io 0xc000-0xcfff] [ 0.764826] pci_bus 0000:09: resource 1 [mem 0xfa000000-0xfb0fffff] [ 0.764965] pci_bus 0000:0a: resource 0 [io 0xc000-0xcfff] [ 0.765096] pci_bus 0000:0a: resource 1 [mem 0xfa000000-0xfb0fffff] [ 0.765216] pci_bus 0000:0b: resource 0 [io 0xb000-0xbfff] [ 0.765332] pci_bus 0000:0b: resource 1 [mem 0xfb100000-0xfb1fffff] [ 0.765452] pci_bus 0000:0b: resource 2 [mem 0x90000000-0x900fffff 64bit pref] [ 0.765994] pci 0000:00:05.0: disabled boot interrupts on device [8086:6f28] [ 0.766239] xen: registering gsi 19 triggering 0 polarity 1 [ 0.766267] xen: --> pirq=19 -> irq=19 (gsi=19) [ 0.775041] xen: registering gsi 18 triggering 0 polarity 1 [ 0.775074] xen: --> pirq=18 -> irq=18 (gsi=18) [ 0.791191] pci 0000:00:1a.0: quirk_usb_early_handoff+0x0/0x720 took 15823 usecs [ 0.791437] xen: registering gsi 18 triggering 0 polarity 1 [ 0.791442] Already setup the GSI :18 [ 0.808224] pci 0000:00:1d.0: quirk_usb_early_handoff+0x0/0x720 took 16448 usecs [ 0.808435] pci 0000:04:00.0: CLS mismatch (64 != 32), using 64 bytes [ 0.808576] PCI-DMA: Using software bounce buffering for IO (SWIOTLB) [ 0.808656] Unpacking initramfs... [ 0.808696] software IO TLB: mapped [mem 0x000000001b180000-0x000000001f180000] (64MB) [ 0.809027] kvm: no hardware support for 'kvm_intel' [ 0.816883] has_svm: not amd or hygon [ 0.816998] kvm: no hardware support for 'kvm_amd' [ 0.817138] clocksource: tsc: mask: 0xffffffffffffffff max_cycles: 0x1fb63109b96, max_idle_ns: 440795265316 ns [ 0.817372] clocksource: Switched to clocksource tsc [ 0.820117] Initialise system trusted keyrings [ 0.820399] workingset: timestamp_bits=62 max_order=17 bucket_order=0 [ 0.821877] NFS: Registering the id_resolver key type [ 0.822005] Key type id_resolver registered [ 0.822117] Key type id_legacy registered [ 0.822331] 9p: Installing v9fs 9p2000 file system support [ 0.836358] Key type asymmetric registered [ 0.836483] Asymmetric key parser 'x509' registered [ 0.836629] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 251) [ 0.836786] io scheduler mq-deadline registered [ 0.836906] io scheduler kyber registered [ 0.837912] xen: registering gsi 16 triggering 0 polarity 1 [ 0.837942] xen: --> pirq=16 -> irq=16 (gsi=16) [ 0.838472] xen: registering gsi 16 triggering 0 polarity 1 [ 0.838478] Already setup the GSI :16 [ 0.839123] xen: registering gsi 16 triggering 0 polarity 1 [ 0.839128] Already setup the GSI :16 [ 0.839449] xen: registering gsi 16 triggering 0 polarity 1 [ 0.839453] Already setup the GSI :16 [ 0.839793] xen: registering gsi 16 triggering 0 polarity 1 [ 0.839797] Already setup the GSI :16 [ 0.840382] xen: registering gsi 16 triggering 0 polarity 1 [ 0.840387] Already setup the GSI :16 [ 0.840972] xen: registering gsi 16 triggering 0 polarity 1 [ 0.840977] Already setup the GSI :16 [ 0.841446] xen: registering gsi 17 triggering 0 polarity 1 [ 0.841463] xen: --> pirq=17 -> irq=17 (gsi=17) [ 0.841811] xen: registering gsi 19 triggering 0 polarity 1 [ 0.841816] Already setup the GSI :19 [ 0.842252] xen: registering gsi 16 triggering 0 polarity 1 [ 0.842256] Already setup the GSI :16 [ 0.842930] input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input0 [ 0.843106] ACPI: button: Power Button [PWRB] [ 0.843248] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input1 [ 0.843694] ACPI: button: Power Button [PWRF] [ 0.843994] Monitor-Mwait will be used to enter C-1 state [ 0.844028] Monitor-Mwait will be used to enter C-2 state [ 0.844043] ACPI: \_SB_.SCK0.CP00: Found 2 idle states [ 0.844435] ACPI: \_SB_.SCK0.CP01: Found 2 idle states [ 0.844796] ACPI: \_SB_.SCK0.CP02: Found 2 idle states [ 0.845809] ACPI: \_SB_.SCK0.CP03: Found 2 idle states [ 0.846160] ACPI: \_SB_.SCK0.CP04: Found 2 idle states [ 0.846502] ACPI: \_SB_.SCK0.CP05: Found 2 idle states [ 0.850812] ACPI: \_SB_.SCK0.CP06: Found 2 idle states [ 0.851380] ACPI: \_SB_.SCK0.CP07: Found 2 idle states [ 0.852164] xen:xen_evtchn: Event-channel device installed [ 0.852364] xen_pciback: backend is vpci [ 0.853054] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled [ 0.853360] 00:04: ttyS1 at I/O 0x2f8 (irq = 3, base_baud = 115200) is a 16550A [ 0.854144] hpet_acpi_add: no address or irqs in _CRS [ 0.854384] Non-volatile memory driver v1.3 [ 0.854498] AMD-Vi: AMD IOMMUv2 functionality not available on this system - This is not a bug. [ 0.856986] loop: module loaded [ 0.863383] ahci 0000:00:1f.2: version 3.0 [ 0.863485] xen: registering gsi 16 triggering 0 polarity 1 [ 0.863494] Already setup the GSI :16 [ 0.863843] ahci 0000:00:1f.2: AHCI 0001.0300 32 slots 6 ports 6 Gbps 0x3f impl SATA mode [ 0.863995] ahci 0000:00:1f.2: flags: 64bit ncq led clo pio ems apst [ 0.879263] scsi host0: ahci [ 0.879704] scsi host1: ahci [ 0.880023] scsi host2: ahci [ 0.880338] scsi host3: ahci [ 0.880691] scsi host4: ahci [ 0.881027] scsi host5: ahci [ 0.881170] ata1: SATA max UDMA/133 abar m2048@0xfb612000 port 0xfb612100 irq 75 [ 0.881326] ata2: SATA max UDMA/133 abar m2048@0xfb612000 port 0xfb612180 irq 75 [ 0.881471] ata3: SATA max UDMA/133 abar m2048@0xfb612000 port 0xfb612200 irq 75 [ 0.881632] ata4: SATA max UDMA/133 abar m2048@0xfb612000 port 0xfb612280 irq 75 [ 0.881777] ata5: SATA max UDMA/133 abar m2048@0xfb612000 port 0xfb612300 irq 75 [ 0.881922] ata6: SATA max UDMA/133 abar m2048@0xfb612000 port 0xfb612380 irq 75 [ 0.882357] tun: Universal TUN/TAP device driver, 1.6 [ 0.882629] e100: Intel(R) PRO/100 Network Driver [ 0.882786] e100: Copyright(c) 1999-2006 Intel Corporation [ 0.882942] sky2: driver version 1.30 [ 0.883131] xen_netfront: Initialising Xen virtual ethernet driver [ 0.883497] xen: registering gsi 18 triggering 0 polarity 1 [ 0.883506] Already setup the GSI :18 [ 0.883726] ehci-pci 0000:00:1a.0: EHCI Host Controller [ 0.883923] ehci-pci 0000:00:1a.0: new USB bus registered, assigned bus number 1 [ 0.884104] ehci-pci 0000:00:1a.0: debug port 2 [ 0.888257] ehci-pci 0000:00:1a.0: irq 18, io mem 0xfb614000 [ 0.894685] ehci-pci 0000:00:1a.0: USB 2.0 started, EHCI 1.00 [ 0.894916] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 6.01 [ 0.895068] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 0.895240] usb usb1: Product: EHCI Host Controller [ 0.895355] usb usb1: Manufacturer: Linux 6.1.95+ ehci_hcd [ 0.895472] usb usb1: SerialNumber: 0000:00:1a.0 [ 0.895755] hub 1-0:1.0: USB hub found [ 0.895881] hub 1-0:1.0: 2 ports detected [ 0.896255] xen: registering gsi 18 triggering 0 polarity 1 [ 0.896265] Already setup the GSI :18 [ 0.896457] ehci-pci 0000:00:1d.0: EHCI Host Controller [ 0.896711] ehci-pci 0000:00:1d.0: new USB bus registered, assigned bus number 2 [ 0.896889] ehci-pci 0000:00:1d.0: debug port 2 [ 0.901001] ehci-pci 0000:00:1d.0: irq 18, io mem 0xfb613000 [ 0.907682] ehci-pci 0000:00:1d.0: USB 2.0 started, EHCI 1.00 [ 0.907904] usb usb2: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 6.01 [ 0.908052] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 0.908197] usb usb2: Product: EHCI Host Controller [ 0.908312] usb usb2: Manufacturer: Linux 6.1.95+ ehci_hcd [ 0.908428] usb usb2: SerialNumber: 0000:00:1d.0 [ 0.908725] hub 2-0:1.0: USB hub found [ 0.908852] hub 2-0:1.0: 2 ports detected [ 0.909283] xen: registering gsi 19 triggering 0 polarity 1 [ 0.909292] Already setup the GSI :19 [ 0.909496] xhci_hcd 0000:00:14.0: xHCI Host Controller [ 0.909698] xhci_hcd 0000:00:14.0: new USB bus registered, assigned bus number 3 [ 0.910915] xhci_hcd 0000:00:14.0: hcc params 0x200077c1 hci version 0x100 quirks 0x0000000000009810 [ 0.911391] xhci_hcd 0000:00:14.0: xHCI Host Controller [ 0.911594] xhci_hcd 0000:00:14.0: new USB bus registered, assigned bus number 4 [ 0.911758] xhci_hcd 0000:00:14.0: Host supports USB 3.0 SuperSpeed [ 0.911966] usb usb3: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 6.01 [ 0.912115] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 0.912262] usb usb3: Product: xHCI Host Controller [ 0.912379] usb usb3: Manufacturer: Linux 6.1.95+ xhci-hcd [ 0.912500] usb usb3: SerialNumber: 0000:00:14.0 [ 0.912868] hub 3-0:1.0: USB hub found [ 0.913010] hub 3-0:1.0: 8 ports detected [ 0.914308] usb usb4: New USB device found, idVendor=1d6b, idProduct=0003, bcdDevice= 6.01 [ 0.914471] usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 0.914574] Freeing initrd memory: 19884K [ 0.914637] usb usb4: Product: xHCI Host Controller [ 0.914864] usb usb4: Manufacturer: Linux 6.1.95+ xhci-hcd [ 0.914980] usb usb4: SerialNumber: 0000:00:14.0 [ 0.915279] hub 4-0:1.0: USB hub found [ 0.915410] hub 4-0:1.0: 6 ports detected [ 0.916514] usbcore: registered new interface driver usblp [ 0.916716] usbcore: registered new interface driver usb-storage [ 0.916863] i8042: PNP: No PS/2 controller found. [ 0.917167] rtc_cmos 00:00: RTC can wake from S4 [ 0.917804] rtc_cmos 00:00: registered as rtc0 [ 0.917960] rtc_cmos 00:00: alarms up to one month, y3k, 114 bytes nvram [ 0.918160] device-mapper: uevent: version 1.0.3 [ 0.918267] xen: registering gsi 18 triggering 0 polarity 1 [ 0.918284] Already setup the GSI :18 [ 0.918403] device-mapper: ioctl: 4.47.0-ioctl (2022-07-28) initialised: dm-devel@redhat.com [ 0.918433] i801_smbus 0000:00:1f.3: SPD Write Disable is set [ 0.918556] intel_pstate: CPU model not supported [ 0.918588] i801_smbus 0000:00:1f.3: SMBus using PCI interrupt [ 0.918705] hid: raw HID events driver (C) Jiri Kosina [ 0.919146] i2c i2c-0: 1/4 memory slots populated (from DMI) [ 0.919165] usbcore: registered new interface driver usbhid [ 0.919384] usbhid: USB HID core driver [ 0.919915] Initializing XFRM netlink socket [ 0.920141] NET: Registered PF_INET6 protocol family [ 0.920726] Segment Routing with IPv6 [ 0.920851] In-situ OAM (IOAM) with IPv6 [ 0.920998] sit: IPv6, IPv4 and MPLS over IPv4 tunneling driver [ 0.921239] NET: Registered PF_PACKET protocol family [ 0.921394] 9pnet: Installing 9P2000 support [ 0.921527] Key type dns_resolver registered [ 0.922247] IPI shorthand broadcast: enabled [ 0.922387] sched_clock: Marking stable (884597634, 37611739)->(1769687997, -847478624) [ 0.922975] registered taskstats version 1 [ 0.923093] Loading compiled-in X.509 certificates [ 0.925529] PM: Magic number: 12:828:932 [ 0.925789] printk: console [netcon0] enabled [ 0.925905] netconsole: network logging started [ 0.926240] cfg80211: Loading compiled-in X.509 certificates for regulatory database [ 0.937981] cfg80211: Loaded X.509 cert 'sforshee: 00b28ddf47aef9cea7' [ 0.938330] cfg80211: Loaded X.509 cert 'wens: 61c038651aabdcf94bd0ac7ff06c7248db18c600' [ 0.938694] ALSA device list: [ 0.938823] No soundcards found. [ 0.939038] cfg80211: loaded regulatory.db is malformed or signature is missing/invalid [ 1.135780] usb 1-1: new high-speed USB device number 2 using ehci-pci [ 1.151747] usb 2-1: new high-speed USB device number 2 using ehci-pci [ 1.152016] usb 3-3: new high-speed USB device number 2 using xhci_hcd [ 1.188518] ata4: SATA link down (SStatus 0 SControl 300) [ 1.188701] ata5: SATA link down (SStatus 0 SControl 300) [ 1.188854] ata2: SATA link down (SStatus 0 SControl 300) [ 1.188993] ata3: SATA link up 6.0 Gbps (SStatus 133 SControl 300) [ 1.189153] ata1: SATA link down (SStatus 0 SControl 300) [ 1.189293] ata6: SATA link down (SStatus 0 SControl 300) [ 1.190245] ata3.00: ATA-10: HGST HUS722T1TALA604, RAGNWA05, max UDMA/133 [ 1.272196] usb 1-1: New USB device found, idVendor=8087, idProduct=8008, bcdDevice= 0.05 [ 1.272391] usb 1-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0 [ 1.272867] hub 1-1:1.0: USB hub found [ 1.273069] hub 1-1:1.0: 4 ports detected [ 1.276244] ata3.00: 1953525168 sectors, multi 16: LBA48 NCQ (depth 32), AA [ 1.276480] ata3.00: Features: NCQ-sndrcv NCQ-prio [ 1.279449] usb 3-3: New USB device found, idVendor=05e3, idProduct=0610, bcdDevice=32.98 [ 1.279606] usb 3-3: New USB device strings: Mfr=0, Product=1, SerialNumber=0 [ 1.279752] usb 3-3: Product: USB2.0 Hub [ 1.280320] usb 2-1: New USB device found, idVendor=8087, idProduct=8000, bcdDevice= 0.05 [ 1.280473] usb 2-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0 [ 1.280753] hub 3-3:1.0: USB hub found [ 1.280991] hub 2-1:1.0: USB hub found [ 1.281190] hub 2-1:1.0: 4 ports detected [ 1.281311] hub 3-3:1.0: 4 ports detected [ 1.304049] ata3.00: configured for UDMA/133 [ 1.304476] scsi 2:0:0:0: Direct-Access ATA HGST HUS722T1TAL WA05 PQ: 0 ANSI: 5 [ 1.305387] sd 2:0:0:0: Attached scsi generic sg0 type 0 [ 1.305547] sd 2:0:0:0: [sda] 1953525168 512-byte logical blocks: (1.00 TB/932 GiB) [ 1.305756] sd 2:0:0:0: [sda] Write Protect is off [ 1.305880] sd 2:0:0:0: [sda] Mode Sense: 00 3a 00 00 [ 1.305948] sd 2:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 1.306183] sd 2:0:0:0: [sda] Preferred minimum I/O size 512 bytes [ 1.325161] sda: sda1 sda2 < sda5 > [ 1.325518] sd 2:0:0:0: [sda] Attached SCSI disk [ 1.326771] Freeing unused kernel image (initmem) memory: 1576K [ 1.326900] Write protecting the kernel read-only data: 22528k [ 1.345104] Freeing unused kernel image (text/rodata gap) memory: 2032K [ 1.346409] Freeing unused kernel image (rodata/data gap) memory: 1568K [ 1.807988] x86/mm: Checked W+X mappings: passed, no W+X pages found. [ 1.808160] usb 3-4: new high-speed USB device number 3 using xhci_hcd [ 1.808179] Run /init as init process [ 1.808408] with arguments: [ 1.808410] /init [ 1.808411] placeholder [ 1.808412] with environment: [ 1.808413] HOME=/ [ 1.808414] TERM=linux [ 1.934975] usb 3-4: New USB device found, idVendor=0557, idProduct=7000, bcdDevice= 0.00 [ 1.935141] usb 3-4: New USB device strings: Mfr=0, Product=0, SerialNumber=0 [ 1.935981] hub 3-4:1.0: USB hub found [ 1.936212] hub 3-4:1.0: 4 ports detected [ 2.001696] usb 3-3.2: new high-speed USB device number 4 using xhci_hcd [ 2.079115] usb 3-3.2: New USB device found, idVendor=05e3, idProduct=0610, bcdDevice=32.98 [ 2.079277] usb 3-3.2: New USB device strings: Mfr=0, Product=1, SerialNumber=0 [ 2.079450] usb 3-3.2: Product: USB2.0 Hub [ 2.080280] hub 3-3.2:1.0: USB hub found [ 2.080711] hub 3-3.2:1.0: 4 ports detected [ 2.225670] usb 3-4.1: new low-speed USB device number 5 using xhci_hcd [ 2.246184] ixgbe: Intel(R) 10 Gigabit PCI Express Network Driver [ 2.246376] ixgbe: Copyright (c) 1999-2016 Intel Corporation. [ 2.246840] ACPI Warning: \_SB.PCI0.BR2C._PRT: Return Package has no elements (empty) (20220331/nsprepkg-94) [ 2.247101] xen: registering gsi 16 triggering 0 polarity 1 [ 2.247110] Already setup the GSI :16 [ 2.250396] igb: Intel(R) Gigabit Ethernet Network Driver [ 2.250520] igb: Copyright (c) 2007-2014 Intel Corporation. [ 2.250747] xen: registering gsi 16 triggering 0 polarity 1 [ 2.250755] Already setup the GSI :16 [ 2.277764] pps pps0: new PPS source ptp0 [ 2.277945] igb 0000:07:00.0: added PHC on eth0 [ 2.278079] igb 0000:07:00.0: Intel(R) Gigabit Ethernet Network Connection [ 2.278200] igb 0000:07:00.0: eth0: (PCIe:2.5Gb/s:Width x1) 0c:c4:7a:9f:87:be [ 2.278365] igb 0000:07:00.0: eth0: PBA No: 010C00-000 [ 2.278481] igb 0000:07:00.0: Using MSI-X interrupts. 4 rx queue(s), 4 tx queue(s) [ 2.278731] xen: registering gsi 17 triggering 0 polarity 1 [ 2.278739] Already setup the GSI :17 [ 2.308211] pps pps1: new PPS source ptp1 [ 2.308431] igb 0000:08:00.0: added PHC on eth1 [ 2.308564] igb 0000:08:00.0: Intel(R) Gigabit Ethernet Network Connection [ 2.308701] igb 0000:08:00.0: eth1: (PCIe:2.5Gb/s:Width x1) 0c:c4:7a:9f:87:bf [ 2.308867] igb 0000:08:00.0: eth1: PBA No: 010000-000 [ 2.308982] igb 0000:08:00.0: Using MSI-X interrupts. 4 rx queue(s), 4 tx queue(s) [ 2.309200] xen: registering gsi 16 triggering 0 polarity 1 [ 2.309205] Already setup the GSI :16 [ 2.330094] usb 3-4.1: New USB device found, idVendor=0557, idProduct=2419, bcdDevice= 1.00 [ 2.330254] usb 3-4.1: New USB device strings: Mfr=0, Product=0, SerialNumber=0 [ 2.336295] input: HID 0557:2419 as /devices/pci0000:00/0000:00:14.0/usb3/3-4/3-4.1/3-4.1:1.0/0003:0557:2419.0001/input/input2 [ 2.364764] igb 0000:0b:00.0: added PHC on eth2 [ 2.364902] igb 0000:0b:00.0: Intel(R) Gigabit Ethernet Network Connection [ 2.365030] igb 0000:0b:00.0: eth2: (PCIe:5.0Gb/s:Width x4) 0c:c4:7a:9f:87:c0 [ 2.365234] igb 0000:0b:00.0: eth2: PBA No: 010000-000 [ 2.365350] igb 0000:0b:00.0: Using MSI-X interrupts. 8 rx queue(s), 8 tx queue(s) [ 2.365569] xen: registering gsi 17 triggering 0 polarity 1 [ 2.365575] Already setup the GSI :17 [ 2.387952] hid-generic 0003:0557:2419.0001: input,hidraw0: USB HID v1.00 Keyboard [HID 0557:2419] on usb-0000:00:14.0-4.1/input0 [ 2.390838] input: HID 0557:2419 as /devices/pci0000:00/0000:00:14.0/usb3/3-4/3-4.1/3-4.1:1.1/0003:0557:2419.0002/input/input3 [ 2.391150] hid-generic 0003:0557:2419.0002: input,hidraw1: USB HID v1.00 Mouse [HID 0557:2419] on usb-0000:00:14.0-4.1/input1 [ 2.421725] igb 0000:0b:00.1: added PHC on eth3 [ 2.421868] igb 0000:0b:00.1: Intel(R) Gigabit Ethernet Network Connection [ 2.421989] igb 0000:0b:00.1: eth3: (PCIe:5.0Gb/s:Width x4) 0c:c4:7a:9f:87:c1 [ 2.422193] igb 0000:0b:00.1: eth3: PBA No: 010000-000 [ 2.422308] igb 0000:0b:00.1: Using MSI-X interrupts. 8 rx queue(s), 8 tx queue(s) [ 2.422531] xen: registering gsi 18 triggering 0 polarity 1 [ 2.422539] Already setup the GSI :18 [ 2.480185] igb 0000:0b:00.2: added PHC on eth4 [ 2.480328] igb 0000:0b:00.2: Intel(R) Gigabit Ethernet Network Connection [ 2.480450] igb 0000:0b:00.2: eth4: (PCIe:5.0Gb/s:Width x4) 0c:c4:7a:9f:87:c2 [ 2.480662] igb 0000:0b:00.2: eth4: PBA No: 010000-000 [ 2.480779] igb 0000:0b:00.2: Using MSI-X interrupts. 8 rx queue(s), 8 tx queue(s) [ 2.481018] xen: registering gsi 19 triggering 0 polarity 1 [ 2.481027] Already setup the GSI :19 [ 2.538297] igb 0000:0b:00.3: added PHC on eth5 [ 2.538439] igb 0000:0b:00.3: Intel(R) Gigabit Ethernet Network Connection [ 2.538561] igb 0000:0b:00.3: eth5: (PCIe:5.0Gb/s:Width x4) 0c:c4:7a:9f:87:c3 [ 2.538782] igb 0000:0b:00.3: eth5: PBA No: 010000-000 [ 2.538899] igb 0000:0b:00.3: Using MSI-X interrupts. 8 rx queue(s), 8 tx queue(s) [ 2.547742] igb 0000:07:00.0 enx0cc47a9f87be: renamed from eth0 [ 2.563047] igb 0000:08:00.0 enx0cc47a9f87bf: renamed from eth1 [ 2.571017] igb 0000:0b:00.0 enx0cc47a9f87c0: renamed from eth2 [ 2.578891] igb 0000:0b:00.1 enx0cc47a9f87c1: renamed from eth3 [ 2.587927] igb 0000:0b:00.3 enx0cc47a9f87c3: renamed from eth5 [ 2.599785] igb 0000:0b:00.2 enx0cc47a9f87c2: renamed from eth4 [ 2.981365] ixgbe 0000:04:00.0: Multiqueue Enabled: Rx Queue count = 8, Tx Queue count = 8 XDP Queue count = 0 [ 3.109896] ixgbe 0000:04:00.0: MAC: 5, PHY: 0, PBA No: 020B00-000 [ 3.110115] ixgbe 0000:04:00.0: 0c:c4:7a:9f:8f:b6 [ 3.403526] ixgbe 0000:04:00.0: Intel(R) 10 Gigabit Network Connection [ 3.403874] ACPI Warning: \_SB.PCI0.BR2C._PRT: Return Package has no elements (empty) (20220331/nsprepkg-94) [ 3.404095] xen: registering gsi 17 triggering 0 polarity 1 [ 3.404106] Already setup the GSI :17 [ 4.144684] ixgbe 0000:04:00.1: Multiqueue Enabled: Rx Queue count = 8, Tx Queue count = 8 XDP Queue count = 0 [ 4.278637] ixgbe 0000:04:00.1: MAC: 5, PHY: 0, PBA No: 020B00-000 [ 4.278800] ixgbe 0000:04:00.1: 0c:c4:7a:9f:8f:b7 [ 4.571654] ixgbe 0000:04:00.1: Intel(R) 10 Gigabit Network Connection [ 4.574160] ixgbe 0000:04:00.0 enx0cc47a9f8fb6: renamed from eth0 [ 4.582202] ixgbe 0000:04:00.1 enx0cc47a9f8fb7: renamed from eth1 [ 4.993821] EXT4-fs (dm-0): mounting ext3 file system using the ext4 subsystem [ 5.001843] EXT4-fs (dm-0): mounted filesystem with ordered data mode. Quota mode: none. [ 8.602603] EXT4-fs (dm-0): re-mounted. Quota mode: none. [ 9.743413] EXT4-fs (sda1): mounting ext3 file system using the ext4 subsystem [ 9.762128] EXT4-fs (sda1): mounted filesystem with ordered data mode. Quota mode: none. [ 9.857260] Adding 1949692k swap on /dev/mapper/debina0--vg-swap_1. Priority:-2 extents:1 across:1949692k [ 11.481478] xenbr0: port 1(enx0cc47a9f87be) entered blocking state [ 11.481676] xenbr0: port 1(enx0cc47a9f87be) entered disabled state [ 11.481862] device enx0cc47a9f87be entered promiscuous mode [ 15.026267] igb 0000:07:00.0 enx0cc47a9f87be: igb: enx0cc47a9f87be NIC Link is Up 1000 Mbps Full Duplex, Flow Control: RX [ 15.133974] IPv6: ADDRCONF(NETDEV_CHANGE): enx0cc47a9f87be: link becomes ready [ 15.134234] xenbr0: port 1(enx0cc47a9f87be) entered blocking state [ 15.134358] xenbr0: port 1(enx0cc47a9f87be) entered forwarding state [ 15.134651] IPv6: ADDRCONF(NETDEV_CHANGE): xenbr0: link becomes ready