[ 0.000000] Linux version 6.10.0-rc5+ (osstest@himrod0) (gcc (Debian 12.2.0-14) 12.2.0, GNU ld (GNU Binutils for Debian) 2.40) #1 SMP PREEMPT_DYNAMIC Tue Jun 25 11:45:30 UTC 2024 [ 0.000000] Command line: placeholder root=/dev/mapper/rimava1--vg-root ro console=hvc0 [ 0.000000] [Firmware Bug]: TSC doesn't count with P0 frequency! [ 0.000000] Released 0 page(s) [ 0.000000] BIOS-provided physical RAM map: [ 0.000000] Xen: [mem 0x0000000000000000-0x0000000000095fff] usable [ 0.000000] Xen: [mem 0x0000000000096000-0x00000000000fffff] reserved [ 0.000000] Xen: [mem 0x0000000000100000-0x0000000020069fff] usable [ 0.000000] Xen: [mem 0x00000000dfe9e000-0x00000000dfe9ffff] type 9 [ 0.000000] Xen: [mem 0x00000000dfea0000-0x00000000dfeb1fff] ACPI data [ 0.000000] Xen: [mem 0x00000000dfeb2000-0x00000000dfedffff] ACPI NVS [ 0.000000] Xen: [mem 0x00000000dfee0000-0x00000000efffffff] reserved [ 0.000000] Xen: [mem 0x00000000fec00000-0x00000000fec00fff] reserved [ 0.000000] Xen: [mem 0x00000000fec20000-0x00000000fec20fff] reserved [ 0.000000] Xen: [mem 0x00000000fee00000-0x00000000feefffff] reserved [ 0.000000] Xen: [mem 0x00000000ffe00000-0x00000000ffffffff] reserved [ 0.000000] Xen: [mem 0x000000fd00000000-0x000000ffffffffff] reserved [ 0.000000] NX (Execute Disable) protection: active [ 0.000000] APIC: Static calls initialized [ 0.000000] SMBIOS 2.6 present. [ 0.000000] DMI: Supermicro H8SCM/H8SCM, BIOS 3.5 11/25/2013 [ 0.000000] DMI: Memory slots populated: 1/4 [ 0.000000] Hypervisor detected: Xen PV [ 0.000012] Xen PV: Detected 6 vCPUS [ 0.037582] tsc: Fast TSC calibration using PIT [ 0.037584] tsc: Detected 3100.932 MHz processor [ 0.037585] tsc: Detected 3101.144 MHz TSC [ 0.037794] e820: update [mem 0x00000000-0x00000fff] usable ==> reserved [ 0.037798] e820: remove [mem 0x000a0000-0x000fffff] usable [ 0.037805] last_pfn = 0x2006a max_arch_pfn = 0x400000000 [ 0.037808] MTRR map: 1 entries (0 fixed + 1 variable; max 16), built from 8 variable MTRRs [ 0.037809] MTRRs set to read-only [ 0.037813] x86/PAT: Configuration [0-7]: WB WT UC- UC WC WP UC UC [ 0.062099] RAMDISK: [mem 0x04000000-0x053b8fff] [ 0.062110] ACPI: Early table checksum verification disabled [ 0.062831] ACPI: RSDP 0x00000000000FA1D0 000024 (v02 ACPIAM) [ 0.062839] ACPI: XSDT 0x00000000DFEA0100 000084 (v01 SMCI 20131125 MSFT 00000097) [ 0.062865] ACPI: FACP 0x00000000DFEA0290 0000F4 (v03 112513 FACP1100 20131125 MSFT 00000097) [ 0.062897] ACPI BIOS Warning (bug): 32/64X length mismatch in FADT/Gpe0Block: 64/32 (20240322/tbfadt-560) [ 0.062907] ACPI: DSDT 0x00000000DFEA0600 005699 (v01 1BA11 1BA11000 00000000 INTL 20051117) [ 0.062917] ACPI: FACS 0x00000000DFEB2000 000040 [ 0.062925] ACPI: FACS 0x00000000DFEB2000 000040 [ 0.062934] ACPI: APIC 0x00000000DFEA0390 0000A4 (v01 112513 APIC1100 20131125 MSFT 00000097) [ 0.062944] ACPI: MCFG 0x00000000DFEA0440 00003C (v01 112513 OEMMCFG 20131125 MSFT 00000097) [ 0.062953] ACPI: OEMB 0x00000000DFEB2040 000075 (v01 112513 OEMB1100 20131125 MSFT 00000097) [ 0.062963] ACPI: HPET 0x00000000DFEAA600 000038 (v01 112513 OEMHPET 20131125 MSFT 00000097) [ 0.062972] ACPI: IVRS 0x00000000DFEAA640 0000B0 (v01 AMD RD890S 00202031 AMD 00000000) [ 0.062982] ACPI: SRAT 0x00000000DFEAA6F0 000108 (v02 AMD AGESA 00000001 AMD 00000001) [ 0.062991] ACPI: SSDT 0x00000000DFEAA800 001158 (v01 A M I POWERNOW 00000001 AMD 00000001) [ 0.063000] ACPI: EINJ 0x00000000DFEAB960 000130 (v01 AMIER AMI_EINJ 20131125 MSFT 00000097) [ 0.063009] ACPI: BERT 0x00000000DFEABAF0 000030 (v01 AMIER AMI_BERT 20131125 MSFT 00000097) [ 0.063018] ACPI: ERST 0x00000000DFEABB20 000210 (v01 AMIER AMI_ERST 20131125 MSFT 00000097) [ 0.063028] ACPI: HEST 0x00000000DFEABD30 0000A8 (v01 AMIER ABC_HEST 20131125 MSFT 00000097) [ 0.063033] ACPI: Reserving FACP table memory at [mem 0xdfea0290-0xdfea0383] [ 0.063035] ACPI: Reserving DSDT table memory at [mem 0xdfea0600-0xdfea5c98] [ 0.063036] ACPI: Reserving FACS table memory at [mem 0xdfeb2000-0xdfeb203f] [ 0.063037] ACPI: Reserving FACS table memory at [mem 0xdfeb2000-0xdfeb203f] [ 0.063039] ACPI: Reserving APIC table memory at [mem 0xdfea0390-0xdfea0433] [ 0.063040] ACPI: Reserving MCFG table memory at [mem 0xdfea0440-0xdfea047b] [ 0.063041] ACPI: Reserving OEMB table memory at [mem 0xdfeb2040-0xdfeb20b4] [ 0.063042] ACPI: Reserving HPET table memory at [mem 0xdfeaa600-0xdfeaa637] [ 0.063043] ACPI: Reserving IVRS table memory at [mem 0xdfeaa640-0xdfeaa6ef] [ 0.063044] ACPI: Reserving SRAT table memory at [mem 0xdfeaa6f0-0xdfeaa7f7] [ 0.063046] ACPI: Reserving SSDT table memory at [mem 0xdfeaa800-0xdfeab957] [ 0.063047] ACPI: Reserving EINJ table memory at [mem 0xdfeab960-0xdfeaba8f] [ 0.063048] ACPI: Reserving BERT table memory at [mem 0xdfeabaf0-0xdfeabb1f] [ 0.063049] ACPI: Reserving ERST table memory at [mem 0xdfeabb20-0xdfeabd2f] [ 0.063050] ACPI: Reserving HEST table memory at [mem 0xdfeabd30-0xdfeabdd7] [ 0.063133] APIC: Switched APIC routing to: Xen PV [ 0.065320] Zone ranges: [ 0.065321] DMA [mem 0x0000000000001000-0x0000000000ffffff] [ 0.065324] DMA32 [mem 0x0000000001000000-0x0000000020069fff] [ 0.065326] Normal empty [ 0.065327] Movable zone start for each node [ 0.065328] Early memory node ranges [ 0.065329] node 0: [mem 0x0000000000001000-0x0000000000095fff] [ 0.065331] node 0: [mem 0x0000000000100000-0x0000000020069fff] [ 0.065333] Initmem setup node 0 [mem 0x0000000000001000-0x0000000020069fff] [ 0.065342] On node 0, zone DMA: 1 pages in unavailable ranges [ 0.065415] On node 0, zone DMA: 106 pages in unavailable ranges [ 0.068220] On node 0, zone DMA32: 32662 pages in unavailable ranges [ 0.068227] p2m virtual area at (____ptrval____), size is 40000000 [ 0.274884] Remapped 106 page(s) [ 0.275365] ACPI: PM-Timer IO Port: 0x808 [ 0.275391] CPU topo: CPU limit of 6 reached. Ignoring further CPUs [ 0.275412] ACPI: LAPIC_NMI (acpi_id[0xff] dfl dfl lint[0x1]) [ 0.275415] ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1]) [ 0.275434] IOAPIC[0]: apic_id 0, version 33, address 0xfec00000, GSI 0-23 [ 0.275441] IOAPIC[1]: apic_id 1, version 33, address 0xfec20000, GSI 24-55 [ 0.275450] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl) [ 0.275454] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 low level) [ 0.275470] ACPI: Using ACPI (MADT) for SMP configuration information [ 0.275474] ACPI: HPET id: 0x8300 base: 0xfed00000 [ 0.275484] CPU topo: Max. logical packages: 1 [ 0.275485] CPU topo: Max. logical dies: 1 [ 0.275486] CPU topo: Max. dies per package: 1 [ 0.275492] CPU topo: Max. threads per core: 1 [ 0.275493] CPU topo: Num. cores per package: 6 [ 0.275494] CPU topo: Num. threads per package: 6 [ 0.275494] CPU topo: Allowing 6 present CPUs plus 0 hotplug CPUs [ 0.275495] CPU topo: Rejected CPUs 2 [ 0.275512] PM: hibernation: Registered nosave memory: [mem 0x00000000-0x00000fff] [ 0.275515] PM: hibernation: Registered nosave memory: [mem 0x00096000-0x000fffff] [ 0.275517] [mem 0x2006a000-0xdfe9dfff] available for PCI devices [ 0.275521] Booting kernel on Xen [ 0.275522] Xen version: 4.19-unstable (preserve-AD) [ 0.275526] clocksource: refined-jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 1910969940391419 ns [ 0.281518] setup_percpu: NR_CPUS:64 nr_cpumask_bits:6 nr_cpu_ids:6 nr_node_ids:1 [ 0.282276] percpu: Embedded 57 pages/cpu s194408 r8192 d30872 u262144 [ 0.282284] pcpu-alloc: s194408 r8192 d30872 u262144 alloc=1*2097152 [ 0.282288] pcpu-alloc: [0] 0 1 2 3 4 5 - - [ 0.282346] xen: PV spinlocks enabled [ 0.282350] PV qspinlock hash table entries: 256 (order: 0, 4096 bytes, linear) [ 0.282353] Kernel command line: placeholder root=/dev/mapper/rimava1--vg-root ro console=hvc0 [ 0.282411] Unknown kernel command line parameters "placeholder", will be passed to user space. [ 0.282471] Dentry cache hash table entries: 65536 (order: 7, 524288 bytes, linear) [ 0.282547] Inode-cache hash table entries: 32768 (order: 6, 262144 bytes, linear) [ 0.282756] Built 1 zonelists, mobility grouping on. Total pages: 131071 [ 0.282760] mem auto-init: stack:all(zero), heap alloc:off, heap free:off [ 0.282762] software IO TLB: area num 8. [ 0.359988] Memory: 385984K/524284K available (16384K kernel code, 2753K rwdata, 6164K rodata, 2680K init, 1864K bss, 138048K reserved, 0K cma-reserved) [ 0.360097] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=6, Nodes=1 [ 0.362489] Dynamic Preempt: voluntary [ 0.362607] rcu: Preemptible hierarchical RCU implementation. [ 0.362608] rcu: RCU event tracing is enabled. [ 0.362609] rcu: RCU restricting CPUs from NR_CPUS=64 to nr_cpu_ids=6. [ 0.362611] Trampoline variant of Tasks RCU enabled. [ 0.362612] rcu: RCU calculated value of scheduler-enlistment delay is 100 jiffies. [ 0.362613] rcu: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=6 [ 0.362633] RCU Tasks: Setting shift to 3 and lim to 1 rcu_task_cb_adjust=1. [ 0.368921] NR_IRQS: 4352, nr_irqs: 1016, preallocated irqs: 16 [ 0.369045] xen:events: Using FIFO-based ABI [ 0.369067] xen: --> pirq=1 -> irq=1 (gsi=1) [ 0.369073] xen: --> pirq=2 -> irq=2 (gsi=2) [ 0.369082] xen: --> pirq=3 -> irq=3 (gsi=3) [ 0.369087] xen: --> pirq=4 -> irq=4 (gsi=4) [ 0.369092] xen: --> pirq=5 -> irq=5 (gsi=5) [ 0.369096] xen: --> pirq=6 -> irq=6 (gsi=6) [ 0.369101] xen: --> pirq=7 -> irq=7 (gsi=7) [ 0.369106] xen: --> pirq=8 -> irq=8 (gsi=8) [ 0.369111] xen: --> pirq=9 -> irq=9 (gsi=9) [ 0.369116] xen: --> pirq=10 -> irq=10 (gsi=10) [ 0.369121] xen: --> pirq=11 -> irq=11 (gsi=11) [ 0.369126] xen: --> pirq=12 -> irq=12 (gsi=12) [ 0.369130] xen: --> pirq=13 -> irq=13 (gsi=13) [ 0.369135] xen: --> pirq=14 -> irq=14 (gsi=14) [ 0.369140] xen: --> pirq=15 -> irq=15 (gsi=15) [ 0.369150] rcu: srcu_init: Setting srcu_struct sizes based on contention. [ 0.375115] Console: colour VGA+ 80x25 [ 0.375119] printk: legacy console [tty0] enabled [ 0.388300] printk: legacy console [hvc0] enabled [ 0.388945] ACPI: Core revision 20240322 [ 0.394731] clocksource: xen: mask: 0xffffffffffffffff max_cycles: 0x1cd42e4dffb, max_idle_ns: 881590591483 ns [ 0.394887] Xen: using vcpuop timer interface [ 0.394894] installing Xen timer for CPU 0 [ 0.395145] clocksource: tsc-early: mask: 0xffffffffffffffff max_cycles: 0x2cb38081cf2, max_idle_ns: 440795365428 ns [ 0.395346] Calibrating delay loop (skipped), value calculated using timer frequency.. 6202.28 BogoMIPS (lpj=3101144) [ 0.395545] [Firmware Bug]: CPU 0: APIC ID mismatch. CPUID: 0x0000 APIC: 0x0010 [ 0.395759] Last level iTLB entries: 4KB 512, 2MB 1024, 4MB 512 [ 0.395868] Last level dTLB entries: 4KB 1024, 2MB 1024, 4MB 512, 1GB 0 [ 0.395984] Spectre V1 : Mitigation: usercopy/swapgs barriers and __user pointer sanitization [ 0.396358] Spectre V2 : Mitigation: Retpolines [ 0.396461] Spectre V2 : Spectre v2 / SpectreRSB mitigation: Filling RSB on context switch [ 0.396604] Spectre V2 : Spectre v2 / SpectreRSB : Filling RSB on VMEXIT [ 0.396715] Spectre V2 : Enabling Speculation Barrier for firmware calls [ 0.396826] RETBleed: Mitigation: untrained return thunk [ 0.396973] Spectre V2 : mitigation: Enabling conditional Indirect Branch Prediction Barrier [ 0.397118] Speculative Store Bypass: Vulnerable [ 0.397251] x86/fpu: Supporting XSAVE feature 0x001: 'x87 floating point registers' [ 0.397348] x86/fpu: Supporting XSAVE feature 0x002: 'SSE registers' [ 0.397457] x86/fpu: Supporting XSAVE feature 0x004: 'AVX registers' [ 0.397567] x86/fpu: xstate_offset[2]: 576, xstate_sizes[2]: 256 [ 0.397676] x86/fpu: Enabled xstate features 0x7, context size is 832 bytes, using 'standard' format. [ 0.421552] Freeing SMP alternatives memory: 40K [ 0.421687] pid_max: default: 32768 minimum: 301 [ 0.421816] LSM: initializing lsm=capability,selinux [ 0.421927] SELinux: Initializing. [ 0.422060] Mount-cache hash table entries: 1024 (order: 1, 8192 bytes, linear) [ 0.422202] Mountpoint-cache hash table entries: 1024 (order: 1, 8192 bytes, linear) [ 0.423468] cpu 0 spinlock event irq 57 [ 0.423579] VPMU disabled by hypervisor. [ 0.424055] Performance Events: PMU not available due to virtualization, using software events only. [ 0.424213] signal: max sigframe size: 1776 [ 0.424399] rcu: Hierarchical SRCU implementation. [ 0.424501] rcu: Max phase no-delay instances is 400. [ 0.429820] smp: Bringing up secondary CPUs ... [ 0.430103] installing Xen timer for CPU 1 [ 0.430484] installing Xen timer for CPU 2 [ 0.430823] installing Xen timer for CPU 3 [ 0.431157] installing Xen timer for CPU 4 [ 0.431526] installing Xen timer for CPU 5 [ 0.027188] [Firmware Bug]: CPU 1: APIC ID mismatch. CPUID: 0x0001 APIC: 0x0011 [ 0.431741] cpu 1 spinlock event irq 87 [ 0.027188] [Firmware Bug]: CPU 2: APIC ID mismatch. CPUID: 0x0002 APIC: 0x0012 [ 0.432414] cpu 2 spinlock event irq 88 [ 0.027188] [Firmware Bug]: CPU 3: APIC ID mismatch. CPUID: 0x0003 APIC: 0x0013 [ 0.432666] cpu 3 spinlock event irq 89 [ 0.027188] [Firmware Bug]: CPU 4: APIC ID mismatch. CPUID: 0x0004 APIC: 0x0014 [ 0.432666] cpu 4 spinlock event irq 90 [ 0.027188] [Firmware Bug]: CPU 5: APIC ID mismatch. CPUID: 0x0005 APIC: 0x0015 [ 0.433395] cpu 5 spinlock event irq 91 [ 0.433632] smp: Brought up 1 node, 6 CPUs [ 0.434541] devtmpfs: initialized [ 0.434541] x86/mm: Memory block size: 128MB [ 0.435390] ACPI: PM: Registering ACPI NVS region [mem 0xdfeb2000-0xdfedffff] (188416 bytes) [ 0.435572] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 1911260446275000 ns [ 0.435725] futex hash table entries: 2048 (order: 5, 131072 bytes, linear) [ 0.435953] PM: RTC time: 13:29:31, date: 2024-06-25 [ 0.436350] NET: Registered PF_NETLINK/PF_ROUTE protocol family [ 0.436482] xen:grant_table: Grant tables using version 1 layout [ 0.436630] Grant table initialized [ 0.437006] audit: initializing netlink subsys (disabled) [ 0.437164] audit: type=2000 audit(1719322172.308:1): state=initialized audit_enabled=0 res=1 [ 0.437408] thermal_sys: Registered thermal governor 'step_wise' [ 0.437411] thermal_sys: Registered thermal governor 'user_space' [ 0.437595] PCI: ECAM [mem 0xe0000000-0xefffffff] (base 0xe0000000) for domain 0000 [bus 00-ff] [ 0.437825] PCI: ECAM [mem 0xe0000000-0xefffffff] reserved as E820 entry [ 0.511774] PCI: Using configuration type 1 for base access [ 0.511952] kprobes: kprobe jump-optimization is enabled. All kprobes are optimized if possible. [ 0.512422] ACPI: Added _OSI(Module Device) [ 0.512553] ACPI: Added _OSI(Processor Device) [ 0.512655] ACPI: Added _OSI(3.0 _SCP Extensions) [ 0.512756] ACPI: Added _OSI(Processor Aggregator Device) [ 0.518330] ACPI: 2 ACPI AML tables successfully acquired and loaded [ 0.518778] xen: registering gsi 9 triggering 0 polarity 1 [ 0.521701] ACPI: _OSC evaluation for CPUs failed, trying _PDC [ 0.522574] ACPI: Interpreter enabled [ 0.522690] ACPI: PM: (supports S0 S1 S4 S5) [ 0.522797] ACPI: Using IOAPIC for interrupt routing [ 0.522937] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug [ 0.523087] PCI: Using E820 reservations for host bridge windows [ 0.523353] ACPI: Enabled 4 GPEs in block 00 to 1F [ 0.532825] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff]) [ 0.532977] acpi PNP0A08:00: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI HPX-Type3] [ 0.533126] acpi PNP0A08:00: _OSC: OS requested [PME PCIeCapability LTR] [ 0.533235] acpi PNP0A08:00: _OSC: platform willing to grant [PME PCIeCapability LTR] [ 0.533347] acpi PNP0A08:00: _OSC: platform retains control of PCIe features (AE_NOT_FOUND) [ 0.533749] PCI host bridge to bus 0000:00 [ 0.533848] pci_bus 0000:00: root bus resource [io 0x0000-0x0cf7 window] [ 0.533958] pci_bus 0000:00: root bus resource [io 0x0d00-0xffff window] [ 0.534067] pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff window] [ 0.534209] pci_bus 0000:00: root bus resource [mem 0x000d0000-0x000dffff window] [ 0.534346] pci_bus 0000:00: root bus resource [mem 0xf0000000-0xfebfffff window] [ 0.534486] pci_bus 0000:00: root bus resource [bus 00-ff] [ 0.534636] pci 0000:00:00.0: [1002:5a13] type 00 class 0x060000 conventional PCI endpoint [ 0.535142] pci 0000:00:00.2: [1002:5a23] type 00 class 0x080600 conventional PCI endpoint [ 0.535654] pci 0000:00:09.0: [1002:5a1c] type 01 class 0x060400 PCIe Root Port [ 0.535860] pci 0000:00:09.0: PCI bridge to [bus 01] [ 0.535974] pci 0000:00:09.0: bridge window [io 0xd000-0xdfff] [ 0.536090] pci 0000:00:09.0: bridge window [mem 0xfe900000-0xfe9fffff] [ 0.536246] pci 0000:00:09.0: enabling Extended Tags [ 0.536459] pci 0000:00:09.0: PME# supported from D0 D3hot D3cold [ 0.536732] pci 0000:00:0a.0: [1002:5a1d] type 01 class 0x060400 PCIe Root Port [ 0.536950] pci 0000:00:0a.0: PCI bridge to [bus 02] [ 0.537064] pci 0000:00:0a.0: bridge window [io 0xe000-0xefff] [ 0.537175] pci 0000:00:0a.0: bridge window [mem 0xfea00000-0xfeafffff] [ 0.537332] pci 0000:00:0a.0: enabling Extended Tags [ 0.537459] pci 0000:00:0a.0: PME# supported from D0 D3hot D3cold [ 0.537752] pci 0000:00:11.0: [1002:4391] type 00 class 0x010601 conventional PCI endpoint [ 0.537935] pci 0000:00:11.0: BAR 0 [io 0xc000-0xc007] [ 0.538060] pci 0000:00:11.0: BAR 1 [io 0xb000-0xb003] [ 0.538183] pci 0000:00:11.0: BAR 2 [io 0xa000-0xa007] [ 0.538320] pci 0000:00:11.0: BAR 3 [io 0x9000-0x9003] [ 0.538368] pci 0000:00:11.0: BAR 4 [io 0x8000-0x800f] [ 0.538493] pci 0000:00:11.0: BAR 5 [mem 0xfebfbc00-0xfebfbfff] [ 0.538831] pci 0000:00:12.0: [1002:4397] type 00 class 0x0c0310 conventional PCI endpoint [ 0.539015] pci 0000:00:12.0: BAR 0 [mem 0xfebf9000-0xfebf9fff] [ 0.539376] pci 0000:00:12.1: [1002:4398] type 00 class 0x0c0310 conventional PCI endpoint [ 0.539567] pci 0000:00:12.1: BAR 0 [mem 0xfebfa000-0xfebfafff] [ 0.539950] pci 0000:00:12.2: [1002:4396] type 00 class 0x0c0320 conventional PCI endpoint [ 0.540134] pci 0000:00:12.2: BAR 0 [mem 0xfebfb800-0xfebfb8ff] [ 0.540459] pci 0000:00:12.2: supports D1 D2 [ 0.540559] pci 0000:00:12.2: PME# supported from D0 D1 D2 D3hot [ 0.540814] pci 0000:00:13.0: [1002:4397] type 00 class 0x0c0310 conventional PCI endpoint [ 0.541005] pci 0000:00:13.0: BAR 0 [mem 0xfebf7000-0xfebf7fff] [ 0.541370] pci 0000:00:13.1: [1002:4398] type 00 class 0x0c0310 conventional PCI endpoint [ 0.541552] pci 0000:00:13.1: BAR 0 [mem 0xfebf8000-0xfebf8fff] [ 0.541936] pci 0000:00:13.2: [1002:4396] type 00 class 0x0c0320 conventional PCI endpoint [ 0.542120] pci 0000:00:13.2: BAR 0 [mem 0xfebfb400-0xfebfb4ff] [ 0.542481] pci 0000:00:13.2: supports D1 D2 [ 0.542580] pci 0000:00:13.2: PME# supported from D0 D1 D2 D3hot [ 0.542851] pci 0000:00:14.0: [1002:4385] type 00 class 0x0c0500 conventional PCI endpoint [ 0.543346] pci 0000:00:14.1: [1002:439c] type 00 class 0x01018a conventional PCI endpoint [ 0.543529] pci 0000:00:14.1: BAR 0 [io 0x0000-0x0007] [ 0.543692] pci 0000:00:14.1: BAR 1 [io 0x0000-0x0003] [ 0.543815] pci 0000:00:14.1: BAR 2 [io 0x0000-0x0007] [ 0.543939] pci 0000:00:14.1: BAR 3 [io 0x0000-0x0003] [ 0.544064] pci 0000:00:14.1: BAR 4 [io 0xff00-0xff0f] [ 0.544219] pci 0000:00:14.1: BAR 0 [io 0x01f0-0x01f7]: legacy IDE quirk [ 0.544327] pci 0000:00:14.1: BAR 1 [io 0x03f6]: legacy IDE quirk [ 0.544346] pci 0000:00:14.1: BAR 2 [io 0x0170-0x0177]: legacy IDE quirk [ 0.544454] pci 0000:00:14.1: BAR 3 [io 0x0376]: legacy IDE quirk [ 0.544739] pci 0000:00:14.3: [1002:439d] type 00 class 0x060100 conventional PCI endpoint [ 0.545223] pci 0000:00:14.4: [1002:4384] type 01 class 0x060401 conventional PCI bridge [ 0.545429] pci 0000:00:14.4: PCI bridge to [bus 03] (subtractive decode) [ 0.545553] pci 0000:00:14.4: bridge window [mem 0xfdf00000-0xfe7fffff] [ 0.545671] pci 0000:00:14.4: bridge window [mem 0xfc000000-0xfcffffff pref] [ 0.545943] pci 0000:00:14.5: [1002:4399] type 00 class 0x0c0310 conventional PCI endpoint [ 0.546127] pci 0000:00:14.5: BAR 0 [mem 0xfebf6000-0xfebf6fff] [ 0.546527] pci 0000:00:18.0: [1022:1600] type 00 class 0x060000 conventional PCI endpoint [ 0.546894] pci 0000:00:18.1: [1022:1601] type 00 class 0x060000 conventional PCI endpoint [ 0.547193] pci 0000:00:18.2: [1022:1602] type 00 class 0x060000 conventional PCI endpoint [ 0.547502] pci 0000:00:18.3: [1022:1603] type 00 class 0x060000 conventional PCI endpoint [ 0.547844] pci 0000:00:18.4: [1022:1604] type 00 class 0x060000 conventional PCI endpoint [ 0.548194] pci 0000:00:18.5: [1022:1605] type 00 class 0x060000 conventional PCI endpoint [ 0.548650] pci 0000:01:00.0: [8086:10d3] type 00 class 0x020000 PCIe Endpoint [ 0.548839] pci 0000:01:00.0: BAR 0 [mem 0xfe9e0000-0xfe9fffff] [ 0.548997] pci 0000:01:00.0: BAR 2 [io 0xd800-0xd81f] [ 0.549134] pci 0000:01:00.0: BAR 3 [mem 0xfe9dc000-0xfe9dffff] [ 0.549492] pci 0000:01:00.0: PME# supported from D0 D3hot D3cold [ 0.552386] pci 0000:00:09.0: PCI bridge to [bus 01] [ 0.552668] pci 0000:02:00.0: [8086:10d3] type 00 class 0x020000 PCIe Endpoint [ 0.552857] pci 0000:02:00.0: BAR 0 [mem 0xfeae0000-0xfeafffff] [ 0.553015] pci 0000:02:00.0: BAR 2 [io 0xe800-0xe81f] [ 0.553184] pci 0000:02:00.0: BAR 3 [mem 0xfeadc000-0xfeadffff] [ 0.553541] pci 0000:02:00.0: PME# supported from D0 D3hot D3cold [ 0.556385] pci 0000:00:0a.0: PCI bridge to [bus 02] [ 0.556545] pci_bus 0000:03: extended config space not accessible [ 0.556707] pci 0000:03:04.0: [102b:0532] type 00 class 0x030000 conventional PCI endpoint [ 0.556898] pci 0000:03:04.0: BAR 0 [mem 0xfc000000-0xfcffffff pref] [ 0.557029] pci 0000:03:04.0: BAR 1 [mem 0xfdffc000-0xfdffffff] [ 0.557376] pci 0000:03:04.0: BAR 2 [mem 0xfe000000-0xfe7fffff] [ 0.557605] pci 0000:03:04.0: Video device with shadowed ROM at [mem 0x000c0000-0x000dffff] [ 0.557981] pci 0000:00:14.4: PCI bridge to [bus 03] (subtractive decode) [ 0.558109] pci 0000:00:14.4: bridge window [io 0x0000-0x0cf7 window] (subtractive decode) [ 0.558252] pci 0000:00:14.4: bridge window [io 0x0d00-0xffff window] (subtractive decode) [ 0.558346] pci 0000:00:14.4: bridge window [mem 0x000a0000-0x000bffff window] (subtractive decode) [ 0.558491] pci 0000:00:14.4: bridge window [mem 0x000d0000-0x000dffff window] (subtractive decode) [ 0.558640] pci 0000:00:14.4: bridge window [mem 0xf0000000-0xfebfffff window] (subtractive decode) [ 0.558855] pci_bus 0000:00: on NUMA node 0 [ 0.559286] xen: registering gsi 13 triggering 1 polarity 0 [ 0.559695] ACPI: PCI: Interrupt link LNKA configured for IRQ 10 [ 0.559866] ACPI: PCI: Interrupt link LNKB configured for IRQ 11 [ 0.560036] ACPI: PCI: Interrupt link LNKC configured for IRQ 10 [ 0.560231] ACPI: PCI: Interrupt link LNKD configured for IRQ 10 [ 0.560402] ACPI: PCI: Interrupt link LNKE configured for IRQ 7 [ 0.560573] ACPI: PCI: Interrupt link LNKF configured for IRQ 10 [ 0.560746] ACPI: PCI: Interrupt link LNKG configured for IRQ 11 [ 0.560916] ACPI: PCI: Interrupt link LNKH configured for IRQ 10 [ 0.561121] xen:balloon: Initialising balloon driver [ 0.561484] iommu: Default domain type: Translated [ 0.561596] iommu: DMA domain TLB invalidation policy: lazy mode [ 0.561770] SCSI subsystem initialized [ 0.561883] libata version 3.00 loaded. [ 0.561883] ACPI: bus type USB registered [ 0.561883] usbcore: registered new interface driver usbfs [ 0.561883] usbcore: registered new interface driver hub [ 0.562357] usbcore: registered new device driver usb [ 0.562480] pps_core: LinuxPPS API ver. 1 registered [ 0.562585] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti [ 0.562773] PTP clock support registered [ 0.562894] Advanced Linux Sound Architecture Driver Initialized. [ 0.563547] NetLabel: Initializing [ 0.563648] NetLabel: domain hash size = 128 [ 0.563750] NetLabel: protocols = UNLABELED CIPSOv4 CALIPSO [ 0.563905] NetLabel: unlabeled traffic allowed by default [ 0.564038] PCI: Using ACPI for IRQ routing [ 0.588965] PCI: pci_cache_line_size set to 64 bytes [ 0.589121] e820: reserve RAM buffer [mem 0x00096000-0x0009ffff] [ 0.589125] e820: reserve RAM buffer [mem 0x2006a000-0x23ffffff] [ 0.589150] pci 0000:03:04.0: vgaarb: setting as boot VGA device [ 0.589150] pci 0000:03:04.0: vgaarb: bridge control possible [ 0.589150] pci 0000:03:04.0: vgaarb: VGA device added: decodes=io+mem,owns=io+mem,locks=none [ 0.589346] vgaarb: loaded [ 0.590857] clocksource: Switched to clocksource tsc-early [ 0.591051] VFS: Disk quotas dquot_6.6.0 [ 0.591155] VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes) [ 0.591299] hugetlbfs: disabling because there are no supported hugepage sizes [ 0.591299] pnp: PnP ACPI init [ 0.591303] system 00:00: [mem 0xfec20000-0xfec200ff] could not be reserved [ 0.591523] system 00:01: [mem 0xf6000000-0xf6003fff] has been reserved [ 0.591913] xen: registering gsi 8 triggering 1 polarity 0 [ 0.591978] system 00:03: [io 0x0a10-0x0a1f] has been reserved [ 0.592465] system 00:04: [mem 0xfec00000-0xfec00fff] could not be reserved [ 0.592580] system 00:04: [mem 0xfee00000-0xfee00fff] has been reserved [ 0.592986] system 00:05: [io 0x0ca2-0x0ca3] has been reserved [ 0.593093] system 00:05: [io 0x0550-0x0551] has been reserved [ 0.593200] system 00:05: [io 0x04d0-0x04d1] has been reserved [ 0.593308] system 00:05: [io 0x040b] has been reserved [ 0.593455] system 00:05: [io 0x04d6] has been reserved [ 0.593560] system 00:05: [io 0x0c00-0x0c01] has been reserved [ 0.593705] system 00:05: [io 0x0c14] has been reserved [ 0.593809] system 00:05: [io 0x0c50-0x0c51] has been reserved [ 0.593915] system 00:05: [io 0x0c52] has been reserved [ 0.594019] system 00:05: [io 0x0c6c] has been reserved [ 0.594122] system 00:05: [io 0x0c6f] has been reserved [ 0.594225] system 00:05: [io 0x0cd0-0x0cd1] has been reserved [ 0.594330] system 00:05: [io 0x0cd2-0x0cd3] has been reserved [ 0.594448] system 00:05: [io 0x0cd4-0x0cd5] has been reserved [ 0.594555] system 00:05: [io 0x0cd6-0x0cd7] has been reserved [ 0.594661] system 00:05: [io 0x0cd8-0x0cdf] has been reserved [ 0.594767] system 00:05: [io 0x0800-0x089f] has been reserved [ 0.594873] system 00:05: [io 0x0b00-0x0b0f] has been reserved [ 0.594979] system 00:05: [io 0x0b20-0x0b3f] has been reserved [ 0.595112] system 00:05: [io 0x0900-0x090f] has been reserved [ 0.595218] system 00:05: [io 0x0910-0x091f] has been reserved [ 0.595323] system 00:05: [io 0xfe00-0xfefe] has been reserved [ 0.595441] system 00:05: [mem 0xffb80000-0xffbfffff] has been reserved [ 0.595550] system 00:05: [mem 0xfec10000-0xfec1001f] has been reserved [ 0.595658] system 00:05: [mem 0xffe50000-0xffe5e05f] has been reserved [ 0.595995] xen: registering gsi 4 triggering 1 polarity 0 [ 0.595998] Already setup the GSI :4 [ 0.596095] pnp 00:06: [dma 0 disabled] [ 0.596383] xen: registering gsi 3 triggering 1 polarity 0 [ 0.596391] pnp 00:07: [dma 0 disabled] [ 0.596536] system 00:08: [mem 0xe0000000-0xefffffff] has been reserved [ 0.596866] pnp 00:09: disabling [mem 0x000c0000-0x000cffff] because it overlaps 0000:03:04.0 BAR 6 [mem 0x000c0000-0x000dffff] [ 0.597044] system 00:09: [mem 0x00000000-0x0009ffff] could not be reserved [ 0.597155] system 00:09: [mem 0x000e0000-0x000fffff] could not be reserved [ 0.597266] system 00:09: [mem 0x00100000-0xdfffffff] could not be reserved [ 0.597389] system 00:09: [mem 0xfec00000-0xffffffff] could not be reserved [ 0.597639] pnp: PnP ACPI: found 10 devices [ 0.616120] PM-Timer failed consistency check (0xffffff) - aborting. [ 0.616254] NET: Registered PF_INET protocol family [ 0.616409] IP idents hash table entries: 8192 (order: 4, 65536 bytes, linear) [ 0.616776] tcp_listen_portaddr_hash hash table entries: 256 (order: 0, 4096 bytes, linear) [ 0.616920] Table-perturb hash table entries: 65536 (order: 6, 262144 bytes, linear) [ 0.617060] TCP established hash table entries: 4096 (order: 3, 32768 bytes, linear) [ 0.617214] TCP bind hash table entries: 4096 (order: 5, 131072 bytes, linear) [ 0.617388] TCP: Hash tables configured (established 4096 bind 4096) [ 0.617539] UDP hash table entries: 256 (order: 1, 8192 bytes, linear) [ 0.617668] UDP-Lite hash table entries: 256 (order: 1, 8192 bytes, linear) [ 0.617817] NET: Registered PF_UNIX/PF_LOCAL protocol family [ 0.618096] RPC: Registered named UNIX socket transport module. [ 0.618203] RPC: Registered udp transport module. [ 0.618302] RPC: Registered tcp transport module. [ 0.618411] RPC: Registered tcp-with-tls transport module. [ 0.618516] RPC: Registered tcp NFSv4.1 backchannel transport module. [ 0.619001] pci 0000:00:09.0: PCI bridge to [bus 01] [ 0.619125] pci 0000:00:09.0: bridge window [io 0xd000-0xdfff] [ 0.619243] pci 0000:00:09.0: bridge window [mem 0xfe900000-0xfe9fffff] [ 0.619384] pci 0000:00:0a.0: PCI bridge to [bus 02] [ 0.619490] pci 0000:00:0a.0: bridge window [io 0xe000-0xefff] [ 0.619606] pci 0000:00:0a.0: bridge window [mem 0xfea00000-0xfeafffff] [ 0.619733] pci 0000:00:14.4: PCI bridge to [bus 03] [ 0.619846] pci 0000:00:14.4: bridge window [mem 0xfdf00000-0xfe7fffff] [ 0.619969] pci 0000:00:14.4: bridge window [mem 0xfc000000-0xfcffffff pref] [ 0.620122] pci_bus 0000:00: resource 4 [io 0x0000-0x0cf7 window] [ 0.620231] pci_bus 0000:00: resource 5 [io 0x0d00-0xffff window] [ 0.620338] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff window] [ 0.620464] pci_bus 0000:00: resource 7 [mem 0x000d0000-0x000dffff window] [ 0.620575] pci_bus 0000:00: resource 8 [mem 0xf0000000-0xfebfffff window] [ 0.620698] pci_bus 0000:01: resource 0 [io 0xd000-0xdfff] [ 0.620802] pci_bus 0000:01: resource 1 [mem 0xfe900000-0xfe9fffff] [ 0.620907] pci_bus 0000:02: resource 0 [io 0xe000-0xefff] [ 0.621012] pci_bus 0000:02: resource 1 [mem 0xfea00000-0xfeafffff] [ 0.621118] pci_bus 0000:03: resource 1 [mem 0xfdf00000-0xfe7fffff] [ 0.621225] pci_bus 0000:03: resource 2 [mem 0xfc000000-0xfcffffff pref] [ 0.621338] pci_bus 0000:03: resource 4 [io 0x0000-0x0cf7 window] [ 0.621465] pci_bus 0000:03: resource 5 [io 0x0d00-0xffff window] [ 0.621571] pci_bus 0000:03: resource 6 [mem 0x000a0000-0x000bffff window] [ 0.621680] pci_bus 0000:03: resource 7 [mem 0x000d0000-0x000dffff window] [ 0.621789] pci_bus 0000:03: resource 8 [mem 0xf0000000-0xfebfffff window] [ 0.622024] xen: registering gsi 16 triggering 0 polarity 1 [ 0.622046] xen: --> pirq=16 -> irq=16 (gsi=16) [ 1.271540] pci 0000:00:12.0: quirk_usb_early_handoff+0x0/0x7c0 took 634353 usecs [ 1.271771] xen: registering gsi 16 triggering 0 polarity 1 [ 1.271780] Already setup the GSI :16 [ 1.295503] pci 0000:00:12.1: quirk_usb_early_handoff+0x0/0x7c0 took 23230 usecs [ 1.295743] xen: registering gsi 17 triggering 0 polarity 1 [ 1.295790] xen: --> pirq=17 -> irq=17 (gsi=17) [ 1.295962] xen: registering gsi 18 triggering 0 polarity 1 [ 1.295979] xen: --> pirq=18 -> irq=18 (gsi=18) [ 1.319565] pci 0000:00:13.0: quirk_usb_early_handoff+0x0/0x7c0 took 23103 usecs [ 1.319796] xen: registering gsi 18 triggering 0 polarity 1 [ 1.319805] Already setup the GSI :18 [ 1.343567] pci 0000:00:13.1: quirk_usb_early_handoff+0x0/0x7c0 took 23270 usecs [ 1.343806] xen: registering gsi 19 triggering 0 polarity 1 [ 1.343845] xen: --> pirq=19 -> irq=19 (gsi=19) [ 1.344040] xen: registering gsi 18 triggering 0 polarity 1 [ 1.344044] Already setup the GSI :18 [ 1.367536] pci 0000:00:14.5: quirk_usb_early_handoff+0x0/0x7c0 took 22998 usecs [ 1.367745] PCI: CLS 64 bytes, default 64 [ 1.367881] PCI-DMA: Using software bounce buffering for IO (SWIOTLB) [ 1.367988] software IO TLB: mapped [mem 0x000000001b200000-0x000000001f200000] (64MB) [ 1.368088] Unpacking initramfs... [ 1.368173] kvm_intel: VMX not supported by CPU 0 [ 1.368356] kvm_amd: SVM not supported by CPU 0 [ 1.368464] clocksource: tsc: mask: 0xffffffffffffffff max_cycles: 0x2cb38081cf2, max_idle_ns: 440795365428 ns [ 1.369666] clocksource: Switched to clocksource tsc [ 1.423920] Initialise system trusted keyrings [ 1.424168] workingset: timestamp_bits=62 max_order=17 bucket_order=0 [ 1.424593] NFS: Registering the id_resolver key type [ 1.424736] Key type id_resolver registered [ 1.424836] Key type id_legacy registered [ 1.425000] 9p: Installing v9fs 9p2000 file system support [ 1.445413] Key type asymmetric registered [ 1.445518] Asymmetric key parser 'x509' registered [ 1.445642] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 251) [ 1.445796] io scheduler mq-deadline registered [ 1.445937] io scheduler kyber registered [ 1.446502] xen: registering gsi 53 triggering 0 polarity 1 [ 1.446535] xen: --> pirq=53 -> irq=53 (gsi=53) [ 1.446810] xen: registering gsi 54 triggering 0 polarity 1 [ 1.446826] xen: --> pirq=54 -> irq=54 (gsi=54) [ 1.447134] input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input0 [ 1.447370] ACPI: button: Power Button [PWRB] [ 1.447510] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input1 [ 1.447708] ACPI: button: Power Button [PWRF] [ 1.450219] ACPI: \_PR_.P001: Found 2 idle states [ 1.450451] ACPI: \_PR_.P002: Found 2 idle states [ 1.452108] ACPI: \_PR_.P003: Found 2 idle states [ 1.452294] ACPI: \_PR_.P004: Found 2 idle states [ 1.452448] ACPI: \_PR_.P005: Found 2 idle states [ 1.452592] ACPI: \_PR_.P006: Found 2 idle states [ 1.453424] xen:xen_evtchn: Event-channel device installed [ 1.453641] xen_pciback: backend is vpci [ 1.454570] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled [ 1.454938] 00:07: ttyS1 at I/O 0x2f8 (irq = 3, base_baud = 115200) is a 16550A [ 1.455680] hpet_acpi_add: no address or irqs in _CRS [ 1.455845] Non-volatile memory driver v1.3 [ 1.458891] loop: module loaded [ 1.467997] ahci 0000:00:11.0: version 3.0 [ 1.468120] xen: registering gsi 22 triggering 0 polarity 1 [ 1.468209] xen: --> pirq=22 -> irq=22 (gsi=22) [ 1.468355] ahci 0000:00:11.0: AHCI vers 0001.0100, 32 command slots, 3 Gbps, SATA mode [ 1.468502] ahci 0000:00:11.0: 4/4 ports implemented (port mask 0xf) [ 1.468610] ahci 0000:00:11.0: flags: 64bit ncq sntf ilck pm led clo pmp pio slum part ccc [ 1.469963] scsi host0: ahci [ 1.470499] scsi host1: ahci [ 1.470973] scsi host2: ahci [ 1.471436] scsi host3: ahci [ 1.471599] ata1: SATA max UDMA/133 abar m1024@0xfebfbc00 port 0xfebfbd00 irq 22 lpm-pol 0 [ 1.471742] ata2: SATA max UDMA/133 abar m1024@0xfebfbc00 port 0xfebfbd80 irq 22 lpm-pol 0 [ 1.471890] ata3: SATA max UDMA/133 abar m1024@0xfebfbc00 port 0xfebfbe00 irq 22 lpm-pol 0 [ 1.472038] ata4: SATA max UDMA/133 abar m1024@0xfebfbc00 port 0xfebfbe80 irq 22 lpm-pol 0 [ 1.472658] tun: Universal TUN/TAP device driver, 1.6 [ 1.472868] e100: Intel(R) PRO/100 Network Driver [ 1.472969] e100: Copyright(c) 1999-2006 Intel Corporation [ 1.473086] sky2: driver version 1.30 [ 1.473243] xen_netfront: Initialising Xen virtual ethernet driver [ 1.473675] xen: registering gsi 16 triggering 0 polarity 1 [ 1.473683] Already setup the GSI :16 [ 1.473833] ohci-pci 0000:00:12.0: OHCI PCI host controller [ 1.473849] xen: registering gsi 17 triggering 0 polarity 1 [ 1.473952] Already setup the GSI :17 [ 1.473991] xen: registering gsi 19 triggering 0 polarity 1 [ 1.474055] Already setup the GSI :19 [ 1.474067] ohci-pci 0000:00:12.0: new USB bus registered, assigned bus number 1 [ 1.474396] ohci-pci 0000:00:12.0: irq 16, io mem 0xfebf9000 [ 1.515383] Freeing initrd memory: 20196K [ 1.530375] usb usb1: New USB device found, idVendor=1d6b, idProduct=0001, bcdDevice= 6.10 [ 1.530526] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 1.530663] usb usb1: Product: OHCI PCI host controller [ 1.530766] usb usb1: Manufacturer: Linux 6.10.0-rc5+ ohci_hcd [ 1.530870] usb usb1: SerialNumber: 0000:00:12.0 [ 1.531187] hub 1-0:1.0: USB hub found [ 1.531310] hub 1-0:1.0: 3 ports detected [ 1.531703] xen: registering gsi 16 triggering 0 polarity 1 [ 1.531711] Already setup the GSI :16 [ 1.531831] ehci-pci 0000:00:12.2: EHCI Host Controller [ 1.532107] ehci-pci 0000:00:12.2: new USB bus registered, assigned bus number 2 [ 1.532267] ehci-pci 0000:00:12.2: applying AMD SB700/SB800/Hudson-2/3 EHCI dummy qh workaround [ 1.532432] ehci-pci 0000:00:12.2: debug port 1 [ 1.532628] ehci-pci 0000:00:12.2: irq 17, io mem 0xfebfb800 [ 1.539309] ehci-pci 0000:00:12.2: USB 2.0 started, EHCI 1.00 [ 1.539583] usb usb2: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 6.10 [ 1.539734] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 1.539872] usb usb2: Product: EHCI Host Controller [ 1.539974] usb usb2: Manufacturer: Linux 6.10.0-rc5+ ehci_hcd [ 1.540089] usb usb2: SerialNumber: 0000:00:12.2 [ 1.540424] hub 2-0:1.0: USB hub found [ 1.540550] hub 2-0:1.0: 6 ports detected [ 1.592302] hub 1-0:1.0: USB hub found [ 1.592418] hub 1-0:1.0: 3 ports detected [ 1.592711] ehci-pci 0000:00:13.2: EHCI Host Controller [ 1.592953] ehci-pci 0000:00:13.2: new USB bus registered, assigned bus number 3 [ 1.593095] ehci-pci 0000:00:13.2: applying AMD SB700/SB800/Hudson-2/3 EHCI dummy qh workaround [ 1.593276] ehci-pci 0000:00:13.2: debug port 1 [ 1.593450] ehci-pci 0000:00:13.2: irq 19, io mem 0xfebfb400 [ 1.600245] ehci-pci 0000:00:13.2: USB 2.0 started, EHCI 1.00 [ 1.600585] usb usb3: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 6.10 [ 1.600736] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 1.600875] usb usb3: Product: EHCI Host Controller [ 1.601002] usb usb3: Manufacturer: Linux 6.10.0-rc5+ ehci_hcd [ 1.601107] usb usb3: SerialNumber: 0000:00:13.2 [ 1.601438] hub 3-0:1.0: USB hub found [ 1.601566] hub 3-0:1.0: 6 ports detected [ 1.602012] ohci-pci 0000:00:12.1: OHCI PCI host controller [ 1.602236] ohci-pci 0000:00:12.1: new USB bus registered, assigned bus number 4 [ 1.602427] ohci-pci 0000:00:12.1: irq 16, io mem 0xfebfa000 [ 1.658370] usb usb4: New USB device found, idVendor=1d6b, idProduct=0001, bcdDevice= 6.10 [ 1.658520] usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 1.658658] usb usb4: Product: OHCI PCI host controller [ 1.658761] usb usb4: Manufacturer: Linux 6.10.0-rc5+ ohci_hcd [ 1.658866] usb usb4: SerialNumber: 0000:00:12.1 [ 1.659156] hub 4-0:1.0: USB hub found [ 1.659277] hub 4-0:1.0: 3 ports detected [ 1.659597] xen: registering gsi 18 triggering 0 polarity 1 [ 1.659602] Already setup the GSI :18 [ 1.659733] ohci-pci 0000:00:13.0: OHCI PCI host controller [ 1.659941] ohci-pci 0000:00:13.0: new USB bus registered, assigned bus number 5 [ 1.660138] ohci-pci 0000:00:13.0: irq 18, io mem 0xfebf7000 [ 1.716360] usb usb5: New USB device found, idVendor=1d6b, idProduct=0001, bcdDevice= 6.10 [ 1.716511] usb usb5: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 1.716651] usb usb5: Product: OHCI PCI host controller [ 1.716752] usb usb5: Manufacturer: Linux 6.10.0-rc5+ ohci_hcd [ 1.716856] usb usb5: SerialNumber: 0000:00:13.0 [ 1.717126] hub 5-0:1.0: USB hub found [ 1.717247] hub 5-0:1.0: 3 ports detected [ 1.717582] xen: registering gsi 18 triggering 0 polarity 1 [ 1.717587] Already setup the GSI :18 [ 1.717719] ohci-pci 0000:00:13.1: OHCI PCI host controller [ 1.717944] ohci-pci 0000:00:13.1: new USB bus registered, assigned bus number 6 [ 1.718117] ohci-pci 0000:00:13.1: irq 18, io mem 0xfebf8000 [ 1.774382] usb usb6: New USB device found, idVendor=1d6b, idProduct=0001, bcdDevice= 6.10 [ 1.774531] usb usb6: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 1.774669] usb usb6: Product: OHCI PCI host controller [ 1.774772] usb usb6: Manufacturer: Linux 6.10.0-rc5+ ohci_hcd [ 1.774876] usb usb6: SerialNumber: 0000:00:13.1 [ 1.775135] hub 6-0:1.0: USB hub found [ 1.775266] hub 6-0:1.0: 3 ports detected [ 1.775598] xen: registering gsi 18 triggering 0 polarity 1 [ 1.775604] Already setup the GSI :18 [ 1.775735] ohci-pci 0000:00:14.5: OHCI PCI host controller [ 1.775925] ohci-pci 0000:00:14.5: new USB bus registered, assigned bus number 7 [ 1.776098] ohci-pci 0000:00:14.5: irq 18, io mem 0xfebf6000 [ 1.777204] ata3: SATA link down (SStatus 0 SControl 300) [ 1.777361] ata4: SATA link down (SStatus 0 SControl 300) [ 1.832402] usb usb7: New USB device found, idVendor=1d6b, idProduct=0001, bcdDevice= 6.10 [ 1.832552] usb usb7: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 1.832690] usb usb7: Product: OHCI PCI host controller [ 1.832792] usb usb7: Manufacturer: Linux 6.10.0-rc5+ ohci_hcd [ 1.832898] usb usb7: SerialNumber: 0000:00:14.5 [ 1.833241] hub 7-0:1.0: USB hub found [ 1.833438] hub 7-0:1.0: 2 ports detected [ 1.833870] usbcore: registered new interface driver usblp [ 1.833998] usbcore: registered new interface driver usb-storage [ 1.834139] i8042: PNP: No PS/2 controller found. [ 1.834254] i8042: Probing ports directly. [ 1.837221] serio: i8042 KBD port at 0x60,0x64 irq 1 [ 1.837327] serio: i8042 AUX port at 0x60,0x64 irq 12 [ 1.837671] rtc_cmos 00:02: RTC can wake from S4 [ 1.838164] rtc_cmos 00:02: registered as rtc0 [ 1.838318] rtc_cmos 00:02: alarms up to one month, y3k, 114 bytes nvram [ 1.838469] device-mapper: uevent: version 1.0.3 [ 1.838639] device-mapper: ioctl: 4.48.0-ioctl (2023-03-01) initialised: dm-devel@lists.linux.dev [ 1.838797] amd_pstate: the _CPC object is not present in SBIOS or ACPI disabled [ 1.838969] hid: raw HID events driver (C) Jiri Kosina [ 1.839296] usbcore: registered new interface driver usbhid [ 1.839399] usbhid: USB HID core driver [ 1.839844] Initializing XFRM netlink socket [ 1.839958] NET: Registered PF_INET6 protocol family [ 1.840597] Segment Routing with IPv6 [ 1.840710] In-situ OAM (IOAM) with IPv6 [ 1.840842] sit: IPv6, IPv4 and MPLS over IPv4 tunneling driver [ 1.841096] NET: Registered PF_PACKET protocol family [ 1.841279] 9pnet: Installing 9P2000 support [ 1.841400] Key type dns_resolver registered [ 1.841514] x86/pm: family 0x15 cpu detected, MSR saving is needed during suspending. [ 1.842253] IPI shorthand broadcast: enabled [ 1.846603] sched_clock: Marking stable (1820003613, 26188809)->(1852396491, -6204069) [ 1.847141] Timer migration: 1 hierarchy levels; 8 children per group; 1 crossnode level [ 1.847563] registered taskstats version 1 [ 1.847662] Loading compiled-in X.509 certificates [ 1.849732] PM: Magic number: 12:184:484 [ 1.851412] printk: legacy console [netcon0] enabled [ 1.851520] netconsole: network logging started [ 1.851723] cfg80211: Loading compiled-in X.509 certificates for regulatory database [ 1.861591] Loaded X.509 cert 'sforshee: 00b28ddf47aef9cea7' [ 1.861965] Loaded X.509 cert 'wens: 61c038651aabdcf94bd0ac7ff06c7248db18c600' [ 1.862124] ALSA device list: [ 1.862233] No soundcards found. [ 1.862979] cfg80211: loaded regulatory.db is malformed or signature is missing/invalid [ 1.931288] ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300) [ 1.931424] ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300) [ 1.932766] ata1.00: ATA-8: WDC WD1003FBYZ-010FB0, 01.01V03, max UDMA/133 [ 1.933210] ata1.00: 1953525168 sectors, multi 0: LBA48 NCQ (depth 32), AA [ 1.934648] ata2.00: ATAPI: ATAPI iHAS124 E, 4L07, max UDMA/100 [ 1.934839] ata1.00: configured for UDMA/133 [ 1.935148] scsi 0:0:0:0: Direct-Access ATA WDC WD1003FBYZ-0 1V03 PQ: 0 ANSI: 5 [ 1.935587] ata2.00: configured for UDMA/100 [ 1.936039] sd 0:0:0:0: Attached scsi generic sg0 type 0 [ 1.936174] sd 0:0:0:0: [sda] 1953525168 512-byte logical blocks: (1.00 TB/932 GiB) [ 1.936441] sd 0:0:0:0: [sda] Write Protect is off [ 1.936549] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00 [ 1.936605] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 1.936882] sd 0:0:0:0: [sda] Preferred minimum I/O size 512 bytes [ 1.937093] scsi 1:0:0:0: CD-ROM ATAPI iHAS124 E 4L07 PQ: 0 ANSI: 5 [ 1.965524] sr 1:0:0:0: [sr0] scsi3-mmc drive: 48x/48x writer dvd-ram cd/rw xa/form2 cdda tray [ 1.965677] cdrom: Uniform CD-ROM driver Revision: 3.20 [ 1.967849] sda: sda1 sda2 < sda5 > [ 1.968222] sd 0:0:0:0: [sda] Attached SCSI disk [ 1.982691] sr 1:0:0:0: Attached scsi CD-ROM sr0 [ 1.982797] sr 1:0:0:0: Attached scsi generic sg1 type 5 [ 1.984568] Freeing unused kernel image (initmem) memory: 2680K [ 1.984708] Write protecting the kernel read-only data: 24576k [ 1.996508] Freeing unused kernel image (rodata/data gap) memory: 2028K [ 2.083224] usb 6-2: new full-speed USB device number 2 using ohci-pci [ 2.104439] x86/mm: Checked W+X mappings: passed, no W+X pages found. [ 2.104554] Run /init as init process [ 2.104650] with arguments: [ 2.104652] /init [ 2.104653] placeholder [ 2.104654] with environment: [ 2.104655] HOME=/ [ 2.104656] TERM=linux [ 2.245259] usb 6-2: New USB device found, idVendor=0557, idProduct=2221, bcdDevice= 0.01 [ 2.245418] usb 6-2: New USB device strings: Mfr=1, Product=2, SerialNumber=0 [ 2.245539] usb 6-2: Product: Hermon USB hidmouse Device [ 2.245642] usb 6-2: Manufacturer: Winbond Electronics Corp [ 2.251745] input: Winbond Electronics Corp Hermon USB hidmouse Device as /devices/pci0000:00/0000:00:13.1/usb6/6-2/6-2:1.0/0003:0557:2221.0001/input/input5 [ 2.252021] hid-generic 0003:0557:2221.0001: input,hidraw0: USB HID v1.00 Mouse [Winbond Electronics Corp Hermon USB hidmouse Device] on usb-0000:00:13.1-2/input0 [ 2.255668] input: Winbond Electronics Corp Hermon USB hidmouse Device as /devices/pci0000:00/0000:00:13.1/usb6/6-2/6-2:1.1/0003:0557:2221.0002/input/input6 [ 2.307455] hid-generic 0003:0557:2221.0002: input,hidraw1: USB HID v1.00 Keyboard [Winbond Electronics Corp Hermon USB hidmouse Device] on usb-0000:00:13.1-2/input1 [ 2.353276] e1000e: Intel(R) PRO/1000 Network Driver [ 2.353415] e1000e: Copyright(c) 1999 - 2015 Intel Corporation. [ 2.353651] xen: registering gsi 48 triggering 0 polarity 1 [ 2.353689] xen: --> pirq=48 -> irq=48 (gsi=48) [ 2.353902] e1000e 0000:01:00.0: Interrupt Throttling Rate (ints/sec) set to dynamic conservative mode [ 2.397119] e1000e 0000:01:00.0 0000:01:00.0 (uninitialized): registered PHC clock [ 2.441054] e1000e 0000:01:00.0 eth0: (PCI Express:2.5GT/s:Width x1) 0c:c4:7a:0a:48:f6 [ 2.441217] e1000e 0000:01:00.0 eth0: Intel(R) PRO/1000 Network Connection [ 2.441409] e1000e 0000:01:00.0 eth0: MAC: 3, PHY: 8, PBA No: 0101FF-0FF [ 2.441615] xen: registering gsi 47 triggering 0 polarity 1 [ 2.441642] xen: --> pirq=47 -> irq=47 (gsi=47) [ 2.441822] e1000e 0000:02:00.0: Interrupt Throttling Rate (ints/sec) set to dynamic conservative mode [ 2.489340] e1000e 0000:02:00.0 0000:02:00.0 (uninitialized): registered PHC clock [ 2.536282] e1000e 0000:02:00.0 eth1: (PCI Express:2.5GT/s:Width x1) 0c:c4:7a:0a:48:f7 [ 2.536431] e1000e 0000:02:00.0 eth1: Intel(R) PRO/1000 Network Connection [ 2.536619] e1000e 0000:02:00.0 eth1: MAC: 3, PHY: 8, PBA No: 0101FF-0FF [ 2.538406] e1000e 0000:01:00.0 enx0cc47a0a48f6: renamed from eth0 [ 2.538741] e1000e 0000:02:00.0 enx0cc47a0a48f7: renamed from eth1 [ 2.714223] random: crng init done [ 3.343724] EXT4-fs (dm-0): mounting ext3 file system using the ext4 subsystem [ 3.348968] EXT4-fs (dm-0): mounted filesystem 3a2dd518-4178-47c2-a077-30d6168b0341 ro with ordered data mode. Quota mode: none. [ 7.663440] EXT4-fs (dm-0): re-mounted 3a2dd518-4178-47c2-a077-30d6168b0341 r/w. Quota mode: none. [ 8.862610] EXT4-fs (sda1): mounting ext3 file system using the ext4 subsystem [ 8.884861] EXT4-fs (sda1): mounted filesystem f37c29d0-cf1b-445b-8452-4384b7065785 r/w with ordered data mode. Quota mode: none. [ 8.960556] Adding 1949692k swap on /dev/mapper/rimava1--vg-swap_1. Priority:-2 extents:1 across:1949692k [ 10.478148] xenbr0: port 1(enx0cc47a0a48f6) entered blocking state [ 10.478335] xenbr0: port 1(enx0cc47a0a48f6) entered disabled state [ 10.478452] e1000e 0000:01:00.0 enx0cc47a0a48f6: entered allmulticast mode [ 10.478612] e1000e 0000:01:00.0 enx0cc47a0a48f6: entered promiscuous mode [ 13.637237] e1000e 0000:01:00.0 enx0cc47a0a48f6: NIC Link is Up 1000 Mbps Full Duplex, Flow Control: None [ 13.637787] xenbr0: port 1(enx0cc47a0a48f6) entered blocking state [ 13.637896] xenbr0: port 1(enx0cc47a0a48f6) entered forwarding state