[ 0.000000] microcode: microcode updated early to revision 0x42e, date = 2019-03-14 [ 0.000000] Linux version 6.1.0-21-amd64 (debian-kernel@lists.debian.org) (gcc-12 (Debian 12.2.0-14) 12.2.0, GNU ld (GNU Binutils for Debian) 2.40) #1 SMP PREEMPT_DYNAMIC Debian 6.1.90-1 (2024-05-03) [ 0.000000] Command line: BOOT_IMAGE=/vmlinuz-6.1.0-21-amd64 root=/dev/mapper/fiano1--vg-root ro console=ttyS0,115200n8 [ 0.000000] BIOS-provided physical RAM map: [ 0.000000] BIOS-e820: [mem 0x0000000000000000-0x000000000009abff] usable [ 0.000000] BIOS-e820: [mem 0x000000000009ac00-0x000000000009ffff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000000e0000-0x00000000000fffff] reserved [ 0.000000] BIOS-e820: [mem 0x0000000000100000-0x000000007de2bfff] usable [ 0.000000] BIOS-e820: [mem 0x000000007de2c000-0x000000007debafff] reserved [ 0.000000] BIOS-e820: [mem 0x000000007debb000-0x000000007dfc3fff] ACPI data [ 0.000000] BIOS-e820: [mem 0x000000007dfc4000-0x000000007e1e0fff] ACPI NVS [ 0.000000] BIOS-e820: [mem 0x000000007e1e1000-0x000000007f36afff] reserved [ 0.000000] BIOS-e820: [mem 0x000000007f36b000-0x000000007f7fffff] ACPI NVS [ 0.000000] BIOS-e820: [mem 0x0000000080000000-0x000000008fffffff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000fed1c000-0x00000000fed3ffff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000ff000000-0x00000000ffffffff] reserved [ 0.000000] BIOS-e820: [mem 0x0000000100000000-0x000000027fffffff] usable [ 0.000000] NX (Execute Disable) protection: active [ 0.000000] SMBIOS 2.7 present. [ 0.000000] DMI: Supermicro X9DBL-3F/X9DBL-iF/X9DBL-3F/X9DBL-iF, BIOS 3.00 12/06/2013 [ 0.000000] tsc: Fast TSC calibration using PIT [ 0.000000] tsc: Detected 1799.998 MHz processor [ 0.000873] e820: update [mem 0x00000000-0x00000fff] usable ==> reserved [ 0.000878] e820: remove [mem 0x000a0000-0x000fffff] usable [ 0.000888] last_pfn = 0x280000 max_arch_pfn = 0x400000000 [ 0.001030] x86/PAT: Configuration [0-7]: WB WC UC- UC WB WP UC- WT [ 0.001679] e820: update [mem 0x80000000-0xffffffff] usable ==> reserved [ 0.001689] last_pfn = 0x7de2c max_arch_pfn = 0x400000000 [ 0.018712] found SMP MP-table at [mem 0x000fd8e0-0x000fd8ef] [ 0.018737] Using GB pages for direct mapping [ 0.019058] RAMDISK: [mem 0x3329b000-0x35944fff] [ 0.019067] ACPI: Early table checksum verification disabled [ 0.019071] ACPI: RSDP 0x00000000000F04A0 000024 (v02 SUPERM) [ 0.019077] ACPI: XSDT 0x000000007DEF1088 00008C (v01 SUPERM SMCI--MB 00000001 AMI 00010013) [ 0.019086] ACPI: FACP 0x000000007DEFBAB0 0000F4 (v04 SUPERM SMCI--MB 00000001 AMI 00010013) [ 0.019094] ACPI: DSDT 0x000000007DEF11A0 00A910 (v02 SUPERM SMCI--MB 00000000 INTL 20091112) [ 0.019100] ACPI: FACS 0x000000007E1D8080 000040 [ 0.019104] ACPI: APIC 0x000000007DEFBBA8 000090 (v03 00000001 AMI 00010013) [ 0.019109] ACPI: FPDT 0x000000007DEFBC38 000044 (v01 00000001 AMI 00010013) [ 0.019114] ACPI: HPET 0x000000007DEFBC80 000038 (v01 SUPERM SMCI--MB 00000001 AMI. 00000005) [ 0.019119] ACPI: PRAD 0x000000007DEFBCB8 0000BE (v02 PRADID PRADTID 00000001 MSFT 04000000) [ 0.019124] ACPI: SPMI 0x000000007DEFBD78 000040 (v05 A M I OEMSPMI 00000000 AMI. 00000000) [ 0.019129] ACPI: SSDT 0x000000007DEFBDB8 0C7AE8 (v02 INTEL CpuPm 00004000 INTL 20091112) [ 0.019135] ACPI: EINJ 0x000000007DFC38A0 000130 (v01 AMI AMI EINJ 00000000 00000000) [ 0.019140] ACPI: ERST 0x000000007DFC39D0 000230 (v01 AMIER AMI ERST 00000000 00000000) [ 0.019145] ACPI: HEST 0x000000007DFC3C00 0000A8 (v01 AMI AMI HEST 00000000 00000000) [ 0.019150] ACPI: BERT 0x000000007DFC3CA8 000030 (v01 AMI AMI BERT 00000000 00000000) [ 0.019155] ACPI: DMAR 0x000000007DFC3CD8 0000B4 (v01 A M I OEMDMAR 00000001 INTL 00000001) [ 0.019160] ACPI: MCFG 0x000000007DFC3D90 00003C (v01 SUPERM SMCI--MB 00000001 MSFT 00000097) [ 0.019164] ACPI: Reserving FACP table memory at [mem 0x7defbab0-0x7defbba3] [ 0.019166] ACPI: Reserving DSDT table memory at [mem 0x7def11a0-0x7defbaaf] [ 0.019168] ACPI: Reserving FACS table memory at [mem 0x7e1d8080-0x7e1d80bf] [ 0.019169] ACPI: Reserving APIC table memory at [mem 0x7defbba8-0x7defbc37] [ 0.019171] ACPI: Reserving FPDT table memory at [mem 0x7defbc38-0x7defbc7b] [ 0.019172] ACPI: Reserving HPET table memory at [mem 0x7defbc80-0x7defbcb7] [ 0.019173] ACPI: Reserving PRAD table memory at [mem 0x7defbcb8-0x7defbd75] [ 0.019175] ACPI: Reserving SPMI table memory at [mem 0x7defbd78-0x7defbdb7] [ 0.019176] ACPI: Reserving SSDT table memory at [mem 0x7defbdb8-0x7dfc389f] [ 0.019178] ACPI: Reserving EINJ table memory at [mem 0x7dfc38a0-0x7dfc39cf] [ 0.019179] ACPI: Reserving ERST table memory at [mem 0x7dfc39d0-0x7dfc3bff] [ 0.019180] ACPI: Reserving HEST table memory at [mem 0x7dfc3c00-0x7dfc3ca7] [ 0.019182] ACPI: Reserving BERT table memory at [mem 0x7dfc3ca8-0x7dfc3cd7] [ 0.019183] ACPI: Reserving DMAR table memory at [mem 0x7dfc3cd8-0x7dfc3d8b] [ 0.019185] ACPI: Reserving MCFG table memory at [mem 0x7dfc3d90-0x7dfc3dcb] [ 0.019255] No NUMA configuration found [ 0.019256] Faking a node at [mem 0x0000000000000000-0x000000027fffffff] [ 0.019272] NODE_DATA(0) allocated [mem 0x27ffd3000-0x27fffdfff] [ 0.019742] Zone ranges: [ 0.019743] DMA [mem 0x0000000000001000-0x0000000000ffffff] [ 0.019746] DMA32 [mem 0x0000000001000000-0x00000000ffffffff] [ 0.019748] Normal [mem 0x0000000100000000-0x000000027fffffff] [ 0.019751] Device empty [ 0.019752] Movable zone start for each node [ 0.019757] Early memory node ranges [ 0.019757] node 0: [mem 0x0000000000001000-0x0000000000099fff] [ 0.019760] node 0: [mem 0x0000000000100000-0x000000007de2bfff] [ 0.019762] node 0: [mem 0x0000000100000000-0x000000027fffffff] [ 0.019765] Initmem setup node 0 [mem 0x0000000000001000-0x000000027fffffff] [ 0.019773] On node 0, zone DMA: 1 pages in unavailable ranges [ 0.019829] On node 0, zone DMA: 102 pages in unavailable ranges [ 0.027937] On node 0, zone Normal: 8660 pages in unavailable ranges [ 0.028232] ACPI: PM-Timer IO Port: 0x408 [ 0.028244] ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1]) [ 0.028246] ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1]) [ 0.028248] ACPI: LAPIC_NMI (acpi_id[0x02] high edge lint[0x1]) [ 0.028249] ACPI: LAPIC_NMI (acpi_id[0x03] high edge lint[0x1]) [ 0.028261] IOAPIC[0]: apic_id 0, version 32, address 0xfec00000, GSI 0-23 [ 0.028267] IOAPIC[1]: apic_id 2, version 32, address 0xfec01000, GSI 24-47 [ 0.028271] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl) [ 0.028274] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level) [ 0.028281] ACPI: Using ACPI (MADT) for SMP configuration information [ 0.028283] ACPI: HPET id: 0x8086a701 base: 0xfed00000 [ 0.028290] TSC deadline timer available [ 0.028291] smpboot: Allowing 4 CPUs, 0 hotplug CPUs [ 0.028314] PM: hibernation: Registered nosave memory: [mem 0x00000000-0x00000fff] [ 0.028317] PM: hibernation: Registered nosave memory: [mem 0x0009a000-0x0009afff] [ 0.028319] PM: hibernation: Registered nosave memory: [mem 0x0009b000-0x0009ffff] [ 0.028320] PM: hibernation: Registered nosave memory: [mem 0x000a0000-0x000dffff] [ 0.028321] PM: hibernation: Registered nosave memory: [mem 0x000e0000-0x000fffff] [ 0.028323] PM: hibernation: Registered nosave memory: [mem 0x7de2c000-0x7debafff] [ 0.028325] PM: hibernation: Registered nosave memory: [mem 0x7debb000-0x7dfc3fff] [ 0.028326] PM: hibernation: Registered nosave memory: [mem 0x7dfc4000-0x7e1e0fff] [ 0.028327] PM: hibernation: Registered nosave memory: [mem 0x7e1e1000-0x7f36afff] [ 0.028329] PM: hibernation: Registered nosave memory: [mem 0x7f36b000-0x7f7fffff] [ 0.028330] PM: hibernation: Registered nosave memory: [mem 0x7f800000-0x7fffffff] [ 0.028331] PM: hibernation: Registered nosave memory: [mem 0x80000000-0x8fffffff] [ 0.028332] PM: hibernation: Registered nosave memory: [mem 0x90000000-0xfed1bfff] [ 0.028333] PM: hibernation: Registered nosave memory: [mem 0xfed1c000-0xfed3ffff] [ 0.028335] PM: hibernation: Registered nosave memory: [mem 0xfed40000-0xfeffffff] [ 0.028336] PM: hibernation: Registered nosave memory: [mem 0xff000000-0xffffffff] [ 0.028339] [mem 0x90000000-0xfed1bfff] available for PCI devices [ 0.028341] Booting paravirtualized kernel on bare hardware [ 0.028344] clocksource: refined-jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645519600211568 ns [ 0.035788] setup_percpu: NR_CPUS:8192 nr_cpumask_bits:4 nr_cpu_ids:4 nr_node_ids:1 [ 0.036185] percpu: Embedded 61 pages/cpu s212992 r8192 d28672 u524288 [ 0.036194] pcpu-alloc: s212992 r8192 d28672 u524288 alloc=1*2097152 [ 0.036198] pcpu-alloc: [0] 0 1 2 3 [ 0.036240] Fallback order for Node 0: 0 [ 0.036244] Built 1 zonelists, mobility grouping on. Total pages: 2055603 [ 0.036246] Policy zone: Normal [ 0.036248] Kernel command line: BOOT_IMAGE=/vmlinuz-6.1.0-21-amd64 root=/dev/mapper/fiano1--vg-root ro console=ttyS0,115200n8 [ 0.036318] Unknown kernel command line parameters "BOOT_IMAGE=/vmlinuz-6.1.0-21-amd64", will be passed to user space. [ 0.036333] random: crng init done [ 0.037383] Dentry cache hash table entries: 1048576 (order: 11, 8388608 bytes, linear) [ 0.037952] Inode-cache hash table entries: 524288 (order: 10, 4194304 bytes, linear) [ 0.038041] mem auto-init: stack:all(zero), heap alloc:on, heap free:off [ 0.038054] software IO TLB: area num 4. [ 0.079126] Memory: 2033856K/8353556K available (14342K kernel code, 2332K rwdata, 9060K rodata, 2796K init, 17404K bss, 304412K reserved, 0K cma-reserved) [ 0.079338] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1 [ 0.079360] Kernel/User page tables isolation: enabled [ 0.079413] ftrace: allocating 40220 entries in 158 pages [ 0.089748] ftrace: allocated 158 pages with 5 groups [ 0.090698] Dynamic Preempt: voluntary [ 0.090741] rcu: Preemptible hierarchical RCU implementation. [ 0.090742] rcu: RCU restricting CPUs from NR_CPUS=8192 to nr_cpu_ids=4. [ 0.090744] Trampoline variant of Tasks RCU enabled. [ 0.090745] Rude variant of Tasks RCU enabled. [ 0.090746] Tracing variant of Tasks RCU enabled. [ 0.090747] rcu: RCU calculated value of scheduler-enlistment delay is 25 jiffies. [ 0.090748] rcu: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=4 [ 0.098092] NR_IRQS: 524544, nr_irqs: 864, preallocated irqs: 16 [ 0.098292] rcu: srcu_init: Setting srcu_struct sizes based on contention. [ 0.102836] Console: colour VGA+ 80x25 [ 1.027213] printk: console [ttyS0] enabled [ 1.031420] ACPI: Core revision 20220331 [ 1.036074] clocksource: hpet: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 133484882848 ns [ 1.045211] APIC: Switch to symmetric I/O mode setup [ 1.050191] DMAR: Host address width 46 [ 1.054039] DMAR: DRHD base: 0x000000fbffc000 flags: 0x1 [ 1.059366] DMAR: dmar0: reg_base_addr fbffc000 ver 1:0 cap d2078c106f0466 ecap f020de [ 1.067289] DMAR: RMRR base: 0x0000007de91000 end: 0x0000007de9dfff [ 1.073564] DMAR: ATSR flags: 0x0 [ 1.076882] DMAR: RHSA base: 0x000000fbffc000 proximity domain: 0x0 [ 1.083149] DMAR-IR: IOAPIC id 0 under DRHD base 0xfbffc000 IOMMU 0 [ 1.089508] DMAR-IR: IOAPIC id 2 under DRHD base 0xfbffc000 IOMMU 0 [ 1.095862] DMAR-IR: HPET id 0 under DRHD base 0xfbffc000 [ 1.101262] DMAR-IR: Queued invalidation will be enabled to support x2apic and Intr-remapping. [ 1.110397] DMAR-IR: Enabled IRQ remapping in x2apic mode [ 1.115797] x2apic enabled [ 1.118523] Switched APIC routing to cluster x2apic. [ 1.124033] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1 [ 1.149210] clocksource: tsc-early: mask: 0xffffffffffffffff max_cycles: 0x19f227af07c, max_idle_ns: 440795246167 ns [ 1.159725] Calibrating delay loop (skipped), value calculated using timer frequency.. 3599.99 BogoMIPS (lpj=7199992) [ 1.163755] CPU0: Thermal monitoring enabled (TM1) [ 1.167807] process: using mwait in idle threads [ 1.171725] Last level iTLB entries: 4KB 512, 2MB 8, 4MB 8 [ 1.175722] Last level dTLB entries: 4KB 512, 2MB 0, 4MB 0, 1GB 4 [ 1.179725] Spectre V1 : Mitigation: usercopy/swapgs barriers and __user pointer sanitization [ 1.183724] Spectre V2 : Mitigation: Retpolines [ 1.187722] Spectre V2 : Spectre v2 / SpectreRSB mitigation: Filling RSB on context switch [ 1.191722] Spectre V2 : Spectre v2 / SpectreRSB : Filling RSB on VMEXIT [ 1.195722] Spectre V2 : Enabling Restricted Speculation for firmware calls [ 1.199724] Spectre V2 : mitigation: Enabling conditional Indirect Branch Prediction Barrier [ 1.203723] Speculative Store Bypass: Mitigation: Speculative Store Bypass disabled via prctl [ 1.207723] MDS: Mitigation: Clear CPU buffers [ 1.211722] MMIO Stale Data: Unknown: No mitigations [ 1.215728] x86/fpu: Supporting XSAVE feature 0x001: 'x87 floating point registers' [ 1.219722] x86/fpu: Supporting XSAVE feature 0x002: 'SSE registers' [ 1.223722] x86/fpu: Supporting XSAVE feature 0x004: 'AVX registers' [ 1.227723] x86/fpu: xstate_offset[2]: 576, xstate_sizes[2]: 256 [ 1.231722] x86/fpu: Enabled xstate features 0x7, context size is 832 bytes, using 'standard' format. [ 1.260542] Freeing SMP alternatives memory: 36K [ 1.263724] pid_max: default: 32768 minimum: 301 [ 1.267756] LSM: Security Framework initializing [ 1.271741] landlock: Up and running. [ 1.275722] Yama: disabled by default; enable with sysctl kernel.yama.* [ 1.279755] AppArmor: AppArmor initialized [ 1.283724] TOMOYO Linux initialized [ 1.287730] LSM support for eBPF active [ 1.291769] Mount-cache hash table entries: 16384 (order: 5, 131072 bytes, linear) [ 1.295738] Mountpoint-cache hash table entries: 16384 (order: 5, 131072 bytes, linear) [ 1.300360] smpboot: CPU0: Intel(R) Xeon(R) CPU E5-2403 v2 @ 1.80GHz (family: 0x6, model: 0x3e, stepping: 0x4) [ 1.303913] cblist_init_generic: Setting adjustable number of callback queues. [ 1.307724] cblist_init_generic: Setting shift to 2 and lim to 1. [ 1.311754] cblist_init_generic: Setting adjustable number of callback queues. [ 1.315723] cblist_init_generic: Setting shift to 2 and lim to 1. [ 1.319745] cblist_init_generic: Setting adjustable number of callback queues. [ 1.323723] cblist_init_generic: Setting shift to 2 and lim to 1. [ 1.327745] Performance Events: PEBS fmt1+, IvyBridge events, 16-deep LBR, full-width counters, Intel PMU driver. [ 1.331724] ... version: 3 [ 1.335723] ... bit width: 48 [ 1.339722] ... generic registers: 8 [ 1.343722] ... value mask: 0000ffffffffffff [ 1.347722] ... max period: 00007fffffffffff [ 1.351722] ... fixed-purpose events: 3 [ 1.355722] ... event mask: 00000007000000ff [ 1.359959] signal: max sigframe size: 1776 [ 1.363748] Estimated ratio of average max frequency by base frequency (times 1024): 1024 [ 1.367755] rcu: Hierarchical SRCU implementation. [ 1.371723] rcu: Max phase no-delay instances is 1000. [ 1.376398] NMI watchdog: Enabled. Permanently consumes one hw-PMU counter. [ 1.379819] smp: Bringing up secondary CPUs ... [ 1.383872] x86: Booting SMP configuration: [ 1.387728] .... node #0, CPUs: #1 #2 #3 [ 1.402890] smp: Brought up 1 node, 4 CPUs [ 1.407724] smpboot: Max logical packages: 1 [ 1.411723] smpboot: Total of 4 processors activated (14399.98 BogoMIPS) [ 1.435938] node 0 deferred pages initialised in 20ms [ 1.440162] devtmpfs: initialized [ 1.443804] x86/mm: Memory block size: 128MB [ 1.448773] ACPI: PM: Registering ACPI NVS region [mem 0x7dfc4000-0x7e1e0fff] (2215936 bytes) [ 1.451775] ACPI: PM: Registering ACPI NVS region [mem 0x7f36b000-0x7f7fffff] (4804608 bytes) [ 1.455878] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645041785100000 ns [ 1.459736] futex hash table entries: 1024 (order: 4, 65536 bytes, linear) [ 1.463784] pinctrl core: initialized pinctrl subsystem [ 1.468606] NET: Registered PF_NETLINK/PF_ROUTE protocol family [ 1.472005] DMA: preallocated 1024 KiB GFP_KERNEL pool for atomic allocations [ 1.475883] DMA: preallocated 1024 KiB GFP_KERNEL|GFP_DMA pool for atomic allocations [ 1.479882] DMA: preallocated 1024 KiB GFP_KERNEL|GFP_DMA32 pool for atomic allocations [ 1.483733] audit: initializing netlink subsys (disabled) [ 1.487739] audit: type=2000 audit(1719362030.400:1): state=initialized audit_enabled=0 res=1 [ 1.487875] thermal_sys: Registered thermal governor 'fair_share' [ 1.491726] thermal_sys: Registered thermal governor 'bang_bang' [ 1.495723] thermal_sys: Registered thermal governor 'step_wise' [ 1.499723] thermal_sys: Registered thermal governor 'user_space' [ 1.503723] thermal_sys: Registered thermal governor 'power_allocator' [ 1.507741] cpuidle: using governor ladder [ 1.515728] cpuidle: using governor menu [ 1.519699] ACPI FADT declares the system doesn't support PCIe ASPM, so disable it [ 1.519725] acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5 [ 1.523827] PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0x80000000-0x8fffffff] (base 0x80000000) [ 1.527726] PCI: MMCONFIG at [mem 0x80000000-0x8fffffff] reserved in E820 [ 1.531733] pmd_set_huge: Cannot satisfy [mem 0x80000000-0x80200000] with a huge-page mapping due to MTRR override. [ 1.536146] PCI: Using configuration type 1 for base access [ 1.539821] core: PMU erratum BJ122, BV98, HSD29 workaround disabled, HT off [ 1.545064] kprobes: kprobe jump-optimization is enabled. All kprobes are optimized if possible. [ 1.547784] HugeTLB: registered 1.00 GiB page size, pre-allocated 0 pages [ 1.551726] HugeTLB: 16380 KiB vmemmap can be freed for a 1.00 GiB page [ 1.559726] HugeTLB: registered 2.00 MiB page size, pre-allocated 0 pages [ 1.567723] HugeTLB: 28 KiB vmemmap can be freed for a 2.00 MiB page [ 1.571879] ACPI: Added _OSI(Module Device) [ 1.575726] ACPI: Added _OSI(Processor Device) [ 1.579723] ACPI: Added _OSI(3.0 _SCP Extensions) [ 1.587724] ACPI: Added _OSI(Processor Aggregator Device) [ 1.706780] ACPI: 2 ACPI AML tables successfully acquired and loaded [ 1.737314] ACPI: Interpreter enabled [ 1.739746] ACPI: PM: (supports S0 S1 S4 S5) [ 1.743723] ACPI: Using IOAPIC for interrupt routing [ 1.751832] HEST: Table parsing has been initialized. [ 1.755848] GHES: APEI firmware first mode is enabled by WHEA _OSC. [ 1.759727] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug [ 1.771723] PCI: Using E820 reservations for host bridge windows [ 1.776272] ACPI: Enabled 5 GPEs in block 00 to 3F [ 1.783833] ACPI BIOS Error (bug): Could not resolve symbol [\_SB.PRAD], AE_NOT_FOUND (20220331/psargs-330) [ 1.787727] ACPI Error: Aborting method \_GPE._L24 due to previous error (AE_NOT_FOUND) (20220331/psparse-529) [ 1.791731] ACPI Error: AE_NOT_FOUND, while evaluating GPE method [_L24] (20220331/evgpe-511) [ 1.795721] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-fe]) [ 1.799721] acpi PNP0A08:00: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI HPX-Type3] [ 1.807817] acpi PNP0A08:00: _OSC: platform does not support [SHPCHotplug PME AER LTR] [ 1.815878] acpi PNP0A08:00: _OSC: OS now controls [PCIeHotplug PCIeCapability] [ 1.823724] acpi PNP0A08:00: FADT indicates ASPM is unsupported, using BIOS configuration [ 1.832085] PCI host bridge to bus 0000:00 [ 1.835726] pci_bus 0000:00: root bus resource [io 0x0000-0x03af window] [ 1.843723] pci_bus 0000:00: root bus resource [io 0x03e0-0x0cf7 window] [ 1.851723] pci_bus 0000:00: root bus resource [io 0x03b0-0x03df window] [ 1.855723] pci_bus 0000:00: root bus resource [io 0x0d00-0xffff window] [ 1.863724] pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000dffff window] [ 1.871723] pci_bus 0000:00: root bus resource [mem 0xfed08000-0xfed08fff window] [ 1.879723] pci_bus 0000:00: root bus resource [mem 0xfed0e000-0xfed0ffff window] [ 1.887723] pci_bus 0000:00: root bus resource [mem 0x80000000-0xfbffffff window] [ 1.895724] pci_bus 0000:00: root bus resource [bus 00-fe] [ 1.899754] pci 0000:00:00.0: [8086:0e00] type 00 class 0x060000 [ 1.903806] pci 0000:00:00.0: PME# supported from D0 D3hot D3cold [ 1.911849] pci 0000:00:01.0: [8086:0e02] type 01 class 0x060400 [ 1.919823] pci 0000:00:01.0: PME# supported from D0 D3hot D3cold [ 1.923891] pci 0000:00:01.1: [8086:0e03] type 01 class 0x060400 [ 1.931821] pci 0000:00:01.1: PME# supported from D0 D3hot D3cold [ 1.935891] pci 0000:00:03.0: [8086:0e08] type 01 class 0x060400 [ 1.943761] pci 0000:00:03.0: enabling Extended Tags [ 1.947788] pci 0000:00:03.0: PME# supported from D0 D3hot D3cold [ 1.955877] pci 0000:00:04.0: [8086:0e20] type 00 class 0x088000 [ 1.959740] pci 0000:00:04.0: reg 0x10: [mem 0xfbb1c000-0xfbb1ffff 64bit] [ 1.967868] pci 0000:00:04.1: [8086:0e21] type 00 class 0x088000 [ 1.971739] pci 0000:00:04.1: reg 0x10: [mem 0xfbb18000-0xfbb1bfff 64bit] [ 1.979858] pci 0000:00:04.2: [8086:0e22] type 00 class 0x088000 [ 1.987739] pci 0000:00:04.2: reg 0x10: [mem 0xfbb14000-0xfbb17fff 64bit] [ 1.991857] pci 0000:00:04.3: [8086:0e23] type 00 class 0x088000 [ 1.999739] pci 0000:00:04.3: reg 0x10: [mem 0xfbb10000-0xfbb13fff 64bit] [ 2.003859] pci 0000:00:04.4: [8086:0e24] type 00 class 0x088000 [ 2.011739] pci 0000:00:04.4: reg 0x10: [mem 0xfbb0c000-0xfbb0ffff 64bit] [ 2.019857] pci 0000:00:04.5: [8086:0e25] type 00 class 0x088000 [ 2.023739] pci 0000:00:04.5: reg 0x10: [mem 0xfbb08000-0xfbb0bfff 64bit] [ 2.031859] pci 0000:00:04.6: [8086:0e26] type 00 class 0x088000 [ 2.035742] pci 0000:00:04.6: reg 0x10: [mem 0xfbb04000-0xfbb07fff 64bit] [ 2.043858] pci 0000:00:04.7: [8086:0e27] type 00 class 0x088000 [ 2.051739] pci 0000:00:04.7: reg 0x10: [mem 0xfbb00000-0xfbb03fff 64bit] [ 2.055856] pci 0000:00:05.0: [8086:0e28] type 00 class 0x088000 [ 2.063852] pci 0000:00:05.2: [8086:0e2a] type 00 class 0x088000 [ 2.067848] pci 0000:00:05.4: [8086:0e2c] type 00 class 0x080020 [ 2.075735] pci 0000:00:05.4: reg 0x10: [mem 0xfbb25000-0xfbb25fff] [ 2.083873] pci 0000:00:11.0: [8086:1d3e] type 01 class 0x060400 [ 2.087843] pci 0000:00:11.0: PME# supported from D0 D3hot D3cold [ 2.095866] pci 0000:00:16.0: [8086:1d3a] type 00 class 0x078000 [ 2.099741] pci 0000:00:16.0: reg 0x10: [mem 0xfed0e000-0xfed0e00f 64bit] [ 2.107791] pci 0000:00:16.0: PME# supported from D0 D3hot D3cold [ 2.111813] pci 0000:00:16.1: [8086:1d3b] type 00 class 0x078000 [ 2.119741] pci 0000:00:16.1: reg 0x10: [mem 0xfed0f000-0xfed0f00f 64bit] [ 2.127791] pci 0000:00:16.1: PME# supported from D0 D3hot D3cold [ 2.131826] pci 0000:00:1a.0: [8086:1d2d] type 00 class 0x0c0320 [ 2.139739] pci 0000:00:1a.0: reg 0x10: [mem 0xfbb23000-0xfbb233ff] [ 2.143814] pci 0000:00:1a.0: PME# supported from D0 D3hot D3cold [ 2.151828] pci 0000:00:1c.0: [8086:1d10] type 01 class 0x060400 [ 2.155822] pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold [ 2.163753] pci 0000:00:1c.0: Enabling MPC IRBNCE [ 2.167724] pci 0000:00:1c.0: Intel PCH root port ACS workaround enabled [ 2.175827] pci 0000:00:1c.1: [8086:1d12] type 01 class 0x060400 [ 2.179823] pci 0000:00:1c.1: PME# supported from D0 D3hot D3cold [ 2.187747] pci 0000:00:1c.1: Enabling MPC IRBNCE [ 2.191724] pci 0000:00:1c.1: Intel PCH root port ACS workaround enabled [ 2.199851] pci 0000:00:1d.0: [8086:1d26] type 00 class 0x0c0320 [ 2.203740] pci 0000:00:1d.0: reg 0x10: [mem 0xfbb22000-0xfbb223ff] [ 2.211814] pci 0000:00:1d.0: PME# supported from D0 D3hot D3cold [ 2.215827] pci 0000:00:1e.0: [8086:244e] type 01 class 0x060401 [ 2.223868] pci 0000:00:1f.0: [8086:1d41] type 00 class 0x060100 [ 2.227939] pci 0000:00:1f.2: [8086:1d02] type 00 class 0x010601 [ 2.235736] pci 0000:00:1f.2: reg 0x10: [io 0xf050-0xf057] [ 2.239730] pci 0000:00:1f.2: reg 0x14: [io 0xf040-0xf043] [ 2.247730] pci 0000:00:1f.2: reg 0x18: [io 0xf030-0xf037] [ 2.251729] pci 0000:00:1f.2: reg 0x1c: [io 0xf020-0xf023] [ 2.259729] pci 0000:00:1f.2: reg 0x20: [io 0xf000-0xf01f] [ 2.263730] pci 0000:00:1f.2: reg 0x24: [mem 0xfbb21000-0xfbb217ff] [ 2.267767] pci 0000:00:1f.2: PME# supported from D3hot [ 2.275814] pci 0000:00:1f.3: [8086:1d22] type 00 class 0x0c0500 [ 2.279741] pci 0000:00:1f.3: reg 0x10: [mem 0xfbb20000-0xfbb200ff 64bit] [ 2.287747] pci 0000:00:1f.3: reg 0x20: [io 0x1180-0x119f] [ 2.291799] pci 0000:00:1f.6: [8086:1d24] type 00 class 0x118000 [ 2.299744] pci 0000:00:1f.6: reg 0x10: [mem 0xfed08000-0xfed08fff 64bit] [ 2.307886] pci 0000:00:01.0: PCI bridge to [bus 01] [ 2.311775] pci 0000:00:01.1: PCI bridge to [bus 02] [ 2.315773] pci 0000:00:03.0: PCI bridge to [bus 03] [ 2.319806] pci 0000:04:00.0: [8086:1d6b] type 00 class 0x010700 [ 2.327746] pci 0000:04:00.0: reg 0x10: [mem 0xfa47c000-0xfa47ffff 64bit pref] [ 2.335737] pci 0000:04:00.0: reg 0x18: [mem 0xfa000000-0xfa3fffff 64bit pref] [ 2.343732] pci 0000:04:00.0: reg 0x20: [io 0xe000-0xe0ff] [ 2.347749] pci 0000:04:00.0: enabling Extended Tags [ 2.351829] pci 0000:04:00.0: reg 0x164: [mem 0xfa400000-0xfa403fff 64bit pref] [ 2.359723] pci 0000:04:00.0: VF(n) BAR0 space: [mem 0xfa400000-0xfa47bfff 64bit pref] (contains BAR0 for 31 VFs) [ 2.371978] pci 0000:00:11.0: PCI bridge to [bus 04] [ 2.375726] pci 0000:00:11.0: bridge window [io 0xe000-0xefff] [ 2.379731] pci 0000:00:11.0: bridge window [mem 0xfa000000-0xfa4fffff 64bit pref] [ 2.387822] pci 0000:05:00.0: [8086:10d3] type 00 class 0x020000 [ 2.395758] pci 0000:05:00.0: reg 0x10: [mem 0xfba00000-0xfba1ffff] [ 2.399760] pci 0000:05:00.0: reg 0x18: [io 0xd000-0xd01f] [ 2.407741] pci 0000:05:00.0: reg 0x1c: [mem 0xfba20000-0xfba23fff] [ 2.411912] pci 0000:05:00.0: PME# supported from D0 D3hot D3cold [ 2.419946] pci 0000:00:1c.0: PCI bridge to [bus 05] [ 2.423726] pci 0000:00:1c.0: bridge window [io 0xd000-0xdfff] [ 2.431725] pci 0000:00:1c.0: bridge window [mem 0xfba00000-0xfbafffff] [ 2.439824] pci 0000:06:00.0: [8086:10d3] type 00 class 0x020000 [ 2.443758] pci 0000:06:00.0: reg 0x10: [mem 0xfb900000-0xfb91ffff] [ 2.451760] pci 0000:06:00.0: reg 0x18: [io 0xc000-0xc01f] [ 2.455741] pci 0000:06:00.0: reg 0x1c: [mem 0xfb920000-0xfb923fff] [ 2.463908] pci 0000:06:00.0: PME# supported from D0 D3hot D3cold [ 2.467938] pci 0000:00:1c.1: PCI bridge to [bus 06] [ 2.471726] pci 0000:00:1c.1: bridge window [io 0xc000-0xcfff] [ 2.479725] pci 0000:00:1c.1: bridge window [mem 0xfb900000-0xfb9fffff] [ 2.487746] pci_bus 0000:07: extended config space not accessible [ 2.491749] pci 0000:07:01.0: [102b:0532] type 00 class 0x030000 [ 2.499739] pci 0000:07:01.0: reg 0x10: [mem 0xf9000000-0xf9ffffff pref] [ 2.503731] pci 0000:07:01.0: reg 0x14: [mem 0xfb800000-0xfb803fff] [ 2.511731] pci 0000:07:01.0: reg 0x18: [mem 0xfb000000-0xfb7fffff] [ 2.519770] pci 0000:07:01.0: Video device with shadowed ROM at [mem 0x000c0000-0x000dffff] [ 2.527834] pci 0000:00:1e.0: PCI bridge to [bus 07] (subtractive decode) [ 2.531727] pci 0000:00:1e.0: bridge window [mem 0xfb000000-0xfb8fffff] [ 2.539730] pci 0000:00:1e.0: bridge window [mem 0xf9000000-0xf9ffffff 64bit pref] [ 2.547723] pci 0000:00:1e.0: bridge window [io 0x0000-0x03af window] (subtractive decode) [ 2.555723] pci 0000:00:1e.0: bridge window [io 0x03e0-0x0cf7 window] (subtractive decode) [ 2.563723] pci 0000:00:1e.0: bridge window [io 0x03b0-0x03df window] (subtractive decode) [ 2.571723] pci 0000:00:1e.0: bridge window [io 0x0d00-0xffff window] (subtractive decode) [ 2.583723] pci 0000:00:1e.0: bridge window [mem 0x000a0000-0x000dffff window] (subtractive decode) [ 2.591723] pci 0000:00:1e.0: bridge window [mem 0xfed08000-0xfed08fff window] (subtractive decode) [ 2.599723] pci 0000:00:1e.0: bridge window [mem 0xfed0e000-0xfed0ffff window] (subtractive decode) [ 2.607723] pci 0000:00:1e.0: bridge window [mem 0x80000000-0xfbffffff window] (subtractive decode) [ 2.620522] ACPI: PCI Root Bridge [UNC0] (domain 0000 [bus ff]) [ 2.623727] acpi PNP0A03:00: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI HPX-Type3] [ 2.635742] acpi PNP0A03:00: _OSC: OS now controls [PCIeHotplug SHPCHotplug PME AER PCIeCapability LTR] [ 2.643723] acpi PNP0A03:00: FADT indicates ASPM is unsupported, using BIOS configuration [ 2.651791] PCI host bridge to bus 0000:ff [ 2.655725] pci_bus 0000:ff: root bus resource [bus ff] [ 2.659736] pci 0000:ff:08.0: [8086:0e80] type 00 class 0x088000 [ 2.667803] pci 0000:ff:09.0: [8086:0e90] type 00 class 0x088000 [ 2.671792] pci 0000:ff:0a.0: [8086:0ec0] type 00 class 0x088000 [ 2.679783] pci 0000:ff:0a.1: [8086:0ec1] type 00 class 0x088000 [ 2.683782] pci 0000:ff:0a.2: [8086:0ec2] type 00 class 0x088000 [ 2.691789] pci 0000:ff:0a.3: [8086:0ec3] type 00 class 0x088000 [ 2.695789] pci 0000:ff:0b.0: [8086:0e1e] type 00 class 0x088000 [ 2.703780] pci 0000:ff:0b.3: [8086:0e1f] type 00 class 0x088000 [ 2.711781] pci 0000:ff:0c.0: [8086:0ee0] type 00 class 0x088000 [ 2.715783] pci 0000:ff:0c.1: [8086:0ee2] type 00 class 0x088000 [ 2.723784] pci 0000:ff:0d.0: [8086:0ee1] type 00 class 0x088000 [ 2.727780] pci 0000:ff:0d.1: [8086:0ee3] type 00 class 0x088000 [ 2.735784] pci 0000:ff:0e.0: [8086:0ea0] type 00 class 0x088000 [ 2.739786] pci 0000:ff:0e.1: [8086:0e30] type 00 class 0x110100 [ 2.747799] pci 0000:ff:0f.0: [8086:0ea8] type 00 class 0x088000 [ 2.751812] pci 0000:ff:0f.1: [8086:0e71] type 00 class 0x088000 [ 2.759806] pci 0000:ff:0f.2: [8086:0eaa] type 00 class 0x088000 [ 2.763807] pci 0000:ff:0f.3: [8086:0eab] type 00 class 0x088000 [ 2.771806] pci 0000:ff:0f.4: [8086:0eac] type 00 class 0x088000 [ 2.775805] pci 0000:ff:0f.5: [8086:0ead] type 00 class 0x088000 [ 2.783808] pci 0000:ff:10.0: [8086:0eb0] type 00 class 0x088000 [ 2.787806] pci 0000:ff:10.1: [8086:0eb1] type 00 class 0x088000 [ 2.795818] pci 0000:ff:10.2: [8086:0eb2] type 00 class 0x088000 [ 2.799807] pci 0000:ff:10.3: [8086:0eb3] type 00 class 0x088000 [ 2.807805] pci 0000:ff:10.4: [8086:0eb4] type 00 class 0x088000 [ 2.811807] pci 0000:ff:10.5: [8086:0eb5] type 00 class 0x088000 [ 2.819807] pci 0000:ff:10.6: [8086:0eb6] type 00 class 0x088000 [ 2.823805] pci 0000:ff:10.7: [8086:0eb7] type 00 class 0x088000 [ 2.831803] pci 0000:ff:13.0: [8086:0e1d] type 00 class 0x088000 [ 2.835783] pci 0000:ff:13.1: [8086:0e34] type 00 class 0x110100 [ 2.843787] pci 0000:ff:13.4: [8086:0e81] type 00 class 0x088000 [ 2.847783] pci 0000:ff:13.5: [8086:0e36] type 00 class 0x110100 [ 2.855785] pci 0000:ff:16.0: [8086:0ec8] type 00 class 0x088000 [ 2.859782] pci 0000:ff:16.1: [8086:0ec9] type 00 class 0x088000 [ 2.867781] pci 0000:ff:16.2: [8086:0eca] type 00 class 0x088000 [ 2.875944] ACPI: PCI: Interrupt link LNKA configured for IRQ 11 [ 2.879777] ACPI: PCI: Interrupt link LNKB configured for IRQ 10 [ 2.887775] ACPI: PCI: Interrupt link LNKC configured for IRQ 5 [ 2.891775] ACPI: PCI: Interrupt link LNKD configured for IRQ 11 [ 2.899774] ACPI: PCI: Interrupt link LNKE configured for IRQ 0 [ 2.903774] ACPI: PCI: Interrupt link LNKF configured for IRQ 0 [ 2.911790] ACPI: PCI: Interrupt link LNKG configured for IRQ 0 [ 2.915775] ACPI: PCI: Interrupt link LNKH configured for IRQ 7 [ 2.925354] iommu: Default domain type: Translated [ 2.927724] iommu: DMA domain TLB invalidation policy: lazy mode [ 2.935823] pps_core: LinuxPPS API ver. 1 registered [ 2.939723] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti [ 2.947726] PTP clock support registered [ 2.951664] EDAC MC: Ver: 3.0.0 [ 2.955983] NetLabel: Initializing [ 2.959386] NetLabel: domain hash size = 128 [ 2.963725] NetLabel: protocols = UNLABELED CIPSOv4 CALIPSO [ 2.971745] NetLabel: unlabeled traffic allowed by default [ 2.975723] PCI: Using ACPI for IRQ routing [ 2.986687] PCI: pci_cache_line_size set to 64 bytes [ 2.986812] e820: reserve RAM buffer [mem 0x0009ac00-0x0009ffff] [ 2.986815] e820: reserve RAM buffer [mem 0x7de2c000-0x7fffffff] [ 2.987760] pci 0000:07:01.0: vgaarb: setting as boot VGA device [ 2.991721] pci 0000:07:01.0: vgaarb: bridge control possible [ 2.991721] pci 0000:07:01.0: vgaarb: VGA device added: decodes=io+mem,owns=io+mem,locks=none [ 3.007731] vgaarb: loaded [ 3.012271] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0, 0, 0, 0, 0, 0 [ 3.019723] hpet0: 8 comparators, 64-bit 14.318180 MHz counter [ 3.025784] clocksource: Switched to clocksource tsc-early [ 3.029424] VFS: Disk quotas dquot_6.6.0 [ 3.033364] VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes) [ 3.040428] AppArmor: AppArmor Filesystem Enabled [ 3.045167] pnp: PnP ACPI init [ 3.048375] system 00:00: [mem 0xfc000000-0xfcffffff] has been reserved [ 3.054998] system 00:00: [mem 0xfd000000-0xfdffffff] has been reserved [ 3.061614] system 00:00: [mem 0xfe000000-0xfeafffff] has been reserved [ 3.068225] system 00:00: [mem 0xfeb00000-0xfebfffff] has been reserved [ 3.074969] system 00:01: [mem 0xfbffc000-0xfbffdfff] could not be reserved [ 3.082071] system 00:03: [io 0x04d0-0x04d1] has been reserved [ 3.087996] system 00:03: [mem 0x00000400-0x000004ff] could not be reserved [ 3.095278] system 00:06: [io 0x0b00-0x0b7f] has been reserved [ 3.101411] pnp 00:07: [dma 0 disabled] [ 3.101654] pnp 00:08: [dma 0 disabled] [ 3.101937] system 00:09: [io 0x0400-0x0453] has been reserved [ 3.107861] system 00:09: [io 0x0458-0x047f] has been reserved [ 3.113778] system 00:09: [io 0x1180-0x119f] has been reserved [ 3.119697] system 00:09: [io 0x0500-0x057f] has been reserved [ 3.125618] system 00:09: [mem 0xfed1c000-0xfed1ffff] has been reserved [ 3.132228] system 00:09: [mem 0xfec00000-0xfecfffff] could not be reserved [ 3.139188] system 00:09: [mem 0xff000000-0xffffffff] has been reserved [ 3.145905] system 00:0a: [io 0x0454-0x0457] has been reserved [ 3.152105] system 00:0b: [mem 0x00000000-0x0009ffff] could not be reserved [ 3.159347] pnp: PnP ACPI: found 12 devices [ 3.170075] clocksource: acpi_pm: mask: 0xffffff max_cycles: 0xffffff, max_idle_ns: 2085701024 ns [ 3.179044] NET: Registered PF_INET protocol family [ 3.184107] IP idents hash table entries: 131072 (order: 8, 1048576 bytes, linear) [ 3.194439] tcp_listen_portaddr_hash hash table entries: 4096 (order: 4, 65536 bytes, linear) [ 3.203005] Table-perturb hash table entries: 65536 (order: 6, 262144 bytes, linear) [ 3.210837] TCP established hash table entries: 65536 (order: 7, 524288 bytes, linear) [ 3.219133] TCP bind hash table entries: 65536 (order: 9, 2097152 bytes, linear) [ 3.226930] TCP: Hash tables configured (established 65536 bind 65536) [ 3.233558] MPTCP token hash table entries: 8192 (order: 5, 196608 bytes, linear) [ 3.241107] UDP hash table entries: 4096 (order: 5, 131072 bytes, linear) [ 3.247937] UDP-Lite hash table entries: 4096 (order: 5, 131072 bytes, linear) [ 3.255232] NET: Registered PF_UNIX/PF_LOCAL protocol family [ 3.260905] NET: Registered PF_XDP protocol family [ 3.265717] pci 0000:00:01.0: PCI bridge to [bus 01] [ 3.270695] pci 0000:00:01.1: PCI bridge to [bus 02] [ 3.275669] pci 0000:00:03.0: PCI bridge to [bus 03] [ 3.280646] pci 0000:00:11.0: PCI bridge to [bus 04] [ 3.285612] pci 0000:00:11.0: bridge window [io 0xe000-0xefff] [ 3.291711] pci 0000:00:11.0: bridge window [mem 0xfa000000-0xfa4fffff 64bit pref] [ 3.299459] pci 0000:00:1c.0: PCI bridge to [bus 05] [ 3.304430] pci 0000:00:1c.0: bridge window [io 0xd000-0xdfff] [ 3.310523] pci 0000:00:1c.0: bridge window [mem 0xfba00000-0xfbafffff] [ 3.317313] pci 0000:00:1c.1: PCI bridge to [bus 06] [ 3.322281] pci 0000:00:1c.1: bridge window [io 0xc000-0xcfff] [ 3.328376] pci 0000:00:1c.1: bridge window [mem 0xfb900000-0xfb9fffff] [ 3.335167] pci 0000:00:1e.0: PCI bridge to [bus 07] [ 3.340134] pci 0000:00:1e.0: bridge window [mem 0xfb000000-0xfb8fffff] [ 3.346921] pci 0000:00:1e.0: bridge window [mem 0xf9000000-0xf9ffffff 64bit pref] [ 3.354661] pci_bus 0000:00: resource 4 [io 0x0000-0x03af window] [ 3.360836] pci_bus 0000:00: resource 5 [io 0x03e0-0x0cf7 window] [ 3.367016] pci_bus 0000:00: resource 6 [io 0x03b0-0x03df window] [ 3.373196] pci_bus 0000:00: resource 7 [io 0x0d00-0xffff window] [ 3.379375] pci_bus 0000:00: resource 8 [mem 0x000a0000-0x000dffff window] [ 3.386248] pci_bus 0000:00: resource 9 [mem 0xfed08000-0xfed08fff window] [ 3.393120] pci_bus 0000:00: resource 10 [mem 0xfed0e000-0xfed0ffff window] [ 3.400079] pci_bus 0000:00: resource 11 [mem 0x80000000-0xfbffffff window] [ 3.407039] pci_bus 0000:04: resource 0 [io 0xe000-0xefff] [ 3.412612] pci_bus 0000:04: resource 2 [mem 0xfa000000-0xfa4fffff 64bit pref] [ 3.419831] pci_bus 0000:05: resource 0 [io 0xd000-0xdfff] [ 3.425404] pci_bus 0000:05: resource 1 [mem 0xfba00000-0xfbafffff] [ 3.431670] pci_bus 0000:06: resource 0 [io 0xc000-0xcfff] [ 3.437242] pci_bus 0000:06: resource 1 [mem 0xfb900000-0xfb9fffff] [ 3.443507] pci_bus 0000:07: resource 1 [mem 0xfb000000-0xfb8fffff] [ 3.449772] pci_bus 0000:07: resource 2 [mem 0xf9000000-0xf9ffffff 64bit pref] [ 3.456992] pci_bus 0000:07: resource 4 [io 0x0000-0x03af window] [ 3.463172] pci_bus 0000:07: resource 5 [io 0x03e0-0x0cf7 window] [ 3.469352] pci_bus 0000:07: resource 6 [io 0x03b0-0x03df window] [ 3.475531] pci_bus 0000:07: resource 7 [io 0x0d00-0xffff window] [ 3.481710] pci_bus 0000:07: resource 8 [mem 0x000a0000-0x000dffff window] [ 3.488583] pci_bus 0000:07: resource 9 [mem 0xfed08000-0xfed08fff window] [ 3.495456] pci_bus 0000:07: resource 10 [mem 0xfed0e000-0xfed0ffff window] [ 3.502414] pci_bus 0000:07: resource 11 [mem 0x80000000-0xfbffffff window] [ 3.509471] pci 0000:00:05.0: disabled boot interrupts on device [8086:0e28] [ 3.537515] pci 0000:00:1a.0: quirk_usb_early_handoff+0x0/0x750 took 20487 usecs [ 3.569500] pci 0000:00:1d.0: quirk_usb_early_handoff+0x0/0x750 took 23992 usecs [ 3.577004] PCI: CLS 64 bytes, default 64 [ 3.581050] DMAR: No SATC found [ 3.581092] Trying to unpack rootfs image as initramfs... [ 3.584195] DMAR: dmar0: Using Queued invalidation [ 3.584273] pci 0000:00:00.0: Adding to iommu group 0 [ 3.599499] pci 0000:00:01.0: Adding to iommu group 1 [ 3.604578] pci 0000:00:01.1: Adding to iommu group 2 [ 3.609663] pci 0000:00:03.0: Adding to iommu group 3 [ 3.614749] pci 0000:00:04.0: Adding to iommu group 4 [ 3.619835] pci 0000:00:04.1: Adding to iommu group 5 [ 3.624913] pci 0000:00:04.2: Adding to iommu group 6 [ 3.629993] pci 0000:00:04.3: Adding to iommu group 7 [ 3.635077] pci 0000:00:04.4: Adding to iommu group 8 [ 3.640156] pci 0000:00:04.5: Adding to iommu group 9 [ 3.645235] pci 0000:00:04.6: Adding to iommu group 10 [ 3.650399] pci 0000:00:04.7: Adding to iommu group 11 [ 3.655565] pci 0000:00:05.0: Adding to iommu group 12 [ 3.660730] pci 0000:00:05.2: Adding to iommu group 13 [ 3.665896] pci 0000:00:05.4: Adding to iommu group 14 [ 3.671063] pci 0000:00:11.0: Adding to iommu group 15 [ 3.676250] pci 0000:00:16.0: Adding to iommu group 16 [ 3.681426] pci 0000:00:16.1: Adding to iommu group 16 [ 3.686600] pci 0000:00:1a.0: Adding to iommu group 17 [ 3.691764] pci 0000:00:1c.0: Adding to iommu group 18 [ 3.696932] pci 0000:00:1c.1: Adding to iommu group 19 [ 3.702097] pci 0000:00:1d.0: Adding to iommu group 20 [ 3.707263] pci 0000:00:1e.0: Adding to iommu group 21 [ 3.712480] pci 0000:00:1f.0: Adding to iommu group 22 [ 3.717643] pci 0000:00:1f.2: Adding to iommu group 22 [ 3.722809] pci 0000:00:1f.3: Adding to iommu group 22 [ 3.727976] pci 0000:00:1f.6: Adding to iommu group 22 [ 3.733147] pci 0000:04:00.0: Adding to iommu group 23 [ 3.738316] pci 0000:05:00.0: Adding to iommu group 24 [ 3.743479] pci 0000:06:00.0: Adding to iommu group 25 [ 3.748626] pci 0000:07:01.0: Adding to iommu group 21 [ 3.753815] pci 0000:ff:08.0: Adding to iommu group 26 [ 3.758996] pci 0000:ff:09.0: Adding to iommu group 27 [ 3.764210] pci 0000:ff:0a.0: Adding to iommu group 28 [ 3.769374] pci 0000:ff:0a.1: Adding to iommu group 28 [ 3.774541] pci 0000:ff:0a.2: Adding to iommu group 28 [ 3.779714] pci 0000:ff:0a.3: Adding to iommu group 28 [ 3.784903] pci 0000:ff:0b.0: Adding to iommu group 29 [ 3.790077] pci 0000:ff:0b.3: Adding to iommu group 29 [ 3.795269] pci 0000:ff:0c.0: Adding to iommu group 30 [ 3.800441] pci 0000:ff:0c.1: Adding to iommu group 30 [ 3.805639] pci 0000:ff:0d.0: Adding to iommu group 31 [ 3.810805] pci 0000:ff:0d.1: Adding to iommu group 31 [ 3.815998] pci 0000:ff:0e.0: Adding to iommu group 32 [ 3.821174] pci 0000:ff:0e.1: Adding to iommu group 32 [ 3.826347] pci 0000:ff:0f.0: Adding to iommu group 33 [ 3.831514] pci 0000:ff:0f.1: Adding to iommu group 34 [ 3.836679] pci 0000:ff:0f.2: Adding to iommu group 35 [ 3.841848] pci 0000:ff:0f.3: Adding to iommu group 36 [ 3.847010] pci 0000:ff:0f.4: Adding to iommu group 37 [ 3.852177] pci 0000:ff:0f.5: Adding to iommu group 38 [ 3.857345] pci 0000:ff:10.0: Adding to iommu group 39 [ 3.862516] pci 0000:ff:10.1: Adding to iommu group 40 [ 3.867683] pci 0000:ff:10.2: Adding to iommu group 41 [ 3.872846] pci 0000:ff:10.3: Adding to iommu group 42 [ 3.878010] pci 0000:ff:10.4: Adding to iommu group 43 [ 3.883181] pci 0000:ff:10.5: Adding to iommu group 44 [ 3.888352] pci 0000:ff:10.6: Adding to iommu group 45 [ 3.893514] pci 0000:ff:10.7: Adding to iommu group 46 [ 3.898726] pci 0000:ff:13.0: Adding to iommu group 47 [ 3.903901] pci 0000:ff:13.1: Adding to iommu group 47 [ 3.909091] pci 0000:ff:13.4: Adding to iommu group 47 [ 3.914264] pci 0000:ff:13.5: Adding to iommu group 47 [ 3.919468] pci 0000:ff:16.0: Adding to iommu group 48 [ 3.924645] pci 0000:ff:16.1: Adding to iommu group 48 [ 3.929821] pci 0000:ff:16.2: Adding to iommu group 48 [ 3.938835] DMAR: Intel(R) Virtualization Technology for Directed I/O [ 3.945288] PCI-DMA: Using software bounce buffering for IO (SWIOTLB) [ 3.951728] software IO TLB: mapped [mem 0x0000000079e2c000-0x000000007de2c000] (64MB) [ 3.960209] Initialise system trusted keyrings [ 3.964676] Key type blacklist registered [ 3.968769] workingset: timestamp_bits=36 max_order=21 bucket_order=0 [ 3.977067] zbud: loaded [ 3.979926] integrity: Platform Keyring initialized [ 3.984821] integrity: Machine keyring initialized [ 3.989614] Key type asymmetric registered [ 3.993710] Asymmetric key parser 'x509' registered [ 4.025194] Freeing initrd memory: 39592K [ 4.036431] alg: self-tests for CTR-KDF (hmac(sha256)) passed [ 4.042220] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 248) [ 4.049654] io scheduler mq-deadline registered [ 4.056627] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4 [ 4.063445] Monitor-Mwait will be used to enter C-1 state [ 4.063459] Monitor-Mwait will be used to enter C-2 state [ 4.063466] ACPI: \_SB_.SCK0.C000: Found 2 idle states [ 4.073542] ERST: Error Record Serialization Table (ERST) support is initialized. [ 4.081030] pstore: Registered erst as persistent store backend [ 4.087091] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled [ 4.093532] 00:07: ttyS0 at I/O 0x3f8 (irq = 4, base_baud = 115200) is a 16550A [ 4.101609] 00:08: ttyS1 at I/O 0x2f8 (irq = 3, base_baud = 115200) is a 16550A [ 4.109843] Linux agpgart interface v0.103 [ 4.114072] AMD-Vi: AMD IOMMUv2 functionality not available on this system - This is not a bug. [ 4.123214] i8042: PNP: PS/2 Controller [PNP0f03:PS2M] at 0x60,0x64 irq 12 [ 4.130089] i8042: PNP: PS/2 controller doesn't have KBD irq; using default 1 [ 4.139675] serio: i8042 KBD port at 0x60,0x64 irq 1 [ 4.144647] serio: i8042 AUX port at 0x60,0x64 irq 12 [ 4.149890] mousedev: PS/2 mouse device common for all mice [ 4.155502] rtc_cmos 00:02: RTC can wake from S4 [ 4.160425] rtc_cmos 00:02: registered as rtc0 [ 4.164912] rtc_cmos 00:02: setting system clock to 2024-06-26T00:33:55 UTC (1719362035) [ 4.173036] rtc_cmos 00:02: alarms up to one month, y3k, 114 bytes nvram, hpet irqs [ 4.180860] intel_pstate: Intel P-state driver initializing [ 4.186730] ledtrig-cpu: registered to indicate activity on CPUs [ 4.210713] NET: Registered PF_INET6 protocol family [ 4.223770] Segment Routing with IPv6 [ 4.227463] In-situ OAM (IOAM) with IPv6 [ 4.231437] mip6: Mobile IPv6 [ 4.234414] NET: Registered PF_PACKET protocol family [ 4.239560] mpls_gso: MPLS GSO support [ 4.243792] microcode: sig=0x306e4, pf=0x8, revision=0x42e [ 4.249363] microcode: Microcode Update Driver: v2.2. [ 4.249370] IPI shorthand broadcast: enabled [ 4.258723] sched_clock: Marking stable (3269292940, 989396805)->(4633218771, -374529026) [ 4.267149] registered taskstats version 1 [ 4.271267] Loading compiled-in X.509 certificates [ 4.316183] Loaded X.509 cert 'Debian Secure Boot CA: 6ccece7e4c6c0d1f6149f3dd27dfcc5cbb419ea1' [ 4.324909] Loaded X.509 cert 'Debian Secure Boot Signer 2022 - linux: 14011249c2675ea8e5148542202005810584b25f' [ 4.335498] zswap: loaded using pool lzo/zbud [ 4.340083] Key type .fscrypt registered [ 4.344010] Key type fscrypt-provisioning registered [ 4.349333] pstore: Using crash dump compression: deflate [ 4.361957] Key type encrypted registered [ 4.365986] AppArmor: AppArmor sha1 policy hashing enabled [ 4.371483] ima: No TPM chip found, activating TPM-bypass! [ 4.376968] ima: Allocated hash algorithm: sha256 [ 4.381684] ima: No architecture policies found [ 4.386225] evm: Initialising EVM extended attributes: [ 4.391360] evm: security.selinux [ 4.394677] evm: security.SMACK64 (disabled) [ 4.398952] evm: security.SMACK64EXEC (disabled) [ 4.403570] evm: security.SMACK64TRANSMUTE (disabled) [ 4.408623] evm: security.SMACK64MMAP (disabled) [ 4.413241] evm: security.apparmor [ 4.416649] evm: security.ima [ 4.419621] evm: security.capability [ 4.423200] evm: HMAC attrs: 0x1 [ 4.597755] clk: Disabling unused clocks [ 4.603336] Freeing unused decrypted memory: 2036K [ 4.608813] Freeing unused kernel image (initmem) memory: 2796K [ 4.614808] Write protecting the kernel read-only data: 26624k [ 4.621411] Freeing unused kernel image (text/rodata gap) memory: 2040K [ 4.628384] Freeing unused kernel image (rodata/data gap) memory: 1180K [ 4.721054] x86/mm: Checked W+X mappings: passed, no W+X pages found. [ 4.727497] x86/mm: Checking user space page tables [ 4.807245] x86/mm: Checked W+X mappings: passed, no W+X pages found. [ 4.813692] Run /init as init process [ 4.817356] with arguments: [ 4.817358] /init [ 4.817359] with environment: [ 4.817360] HOME=/ [ 4.817362] TERM=linux [ 4.817363] BOOT_IMAGE=/vmlinuz-6.1.0-21-amd64 [ 4.961419] tsc: Refined TSC clocksource calibration: 1799.999 MHz [ 4.967613] clocksource: tsc: mask: 0xffffffffffffffff max_cycles: 0x19f228ab7a2, max_idle_ns: 440795289252 ns [ 4.977887] clocksource: Switched to clocksource tsc [ 5.050669] e1000e: Intel(R) PRO/1000 Network Driver [ 5.055642] e1000e: Copyright(c) 1999 - 2015 Intel Corporation. [ 5.061928] ACPI: bus type USB registered [ 5.065980] usbcore: registered new interface driver usbfs [ 5.071480] usbcore: registered new interface driver hub [ 5.076815] usbcore: registered new device driver usb [ 5.086893] SCSI subsystem initialized [ 5.092179] e1000e 0000:05:00.0: Interrupt Throttling Rate (ints/sec) set to dynamic conservative mode [ 5.098429] i801_smbus 0000:00:1f.3: SMBus using PCI interrupt [ 5.107956] i2c i2c-0: 1/6 memory slots populated (from DMI) [ 5.113626] i2c i2c-0: Systems with more than 4 memory slots not supported yet, not instantiating SPD [ 5.126744] ehci-pci 0000:00:1a.0: EHCI Host Controller [ 5.132494] ehci-pci 0000:00:1a.0: new USB bus registered, assigned bus number 1 [ 5.139911] ehci-pci 0000:00:1a.0: debug port 2 [ 5.145617] libata version 3.00 loaded. [ 5.148425] ehci-pci 0000:00:1a.0: irq 16, io mem 0xfbb23000 [ 5.157091] e1000e 0000:05:00.0 0000:05:00.0 (uninitialized): registered PHC clock [ 5.165035] ahci 0000:00:1f.2: version 3.0 [ 5.173424] ehci-pci 0000:00:1a.0: USB 2.0 started, EHCI 1.00 [ 5.179259] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 6.01 [ 5.179262] ahci 0000:00:1f.2: AHCI 0001.0300 32 slots 6 ports 6 Gbps 0x3f impl SATA mode [ 5.187539] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 5.195713] ahci 0000:00:1f.2: flags: 64bit ncq sntf pm led clo pio slum part ems apst [ 5.202941] usb usb1: Product: EHCI Host Controller [ 5.215818] usb usb1: Manufacturer: Linux 6.1.0-21-amd64 ehci_hcd [ 5.217726] e1000e 0000:05:00.0 eth0: (PCI Express:2.5GT/s:Width x1) 00:25:90:eb:25:a6 [ 5.221911] usb usb1: SerialNumber: 0000:00:1a.0 [ 5.222108] hub 1-0:1.0: USB hub found [ 5.229833] e1000e 0000:05:00.0 eth0: Intel(R) PRO/1000 Network Connection [ 5.229916] e1000e 0000:05:00.0 eth0: MAC: 3, PHY: 8, PBA No: FFFFFF-0FF [ 5.234515] hub 1-0:1.0: 2 ports detected [ 5.238475] e1000e 0000:06:00.0: Interrupt Throttling Rate (ints/sec) set to dynamic conservative mode [ 5.245527] ehci-pci 0000:00:1d.0: EHCI Host Controller [ 5.270375] ehci-pci 0000:00:1d.0: new USB bus registered, assigned bus number 2 [ 5.274032] scsi host0: ahci [ 5.277781] ehci-pci 0000:00:1d.0: debug port 2 [ 5.280841] scsi host1: ahci [ 5.288276] scsi host2: ahci [ 5.288493] isci: Intel(R) C600 SAS Controller Driver - version 1.2.0 [ 5.289134] ehci-pci 0000:00:1d.0: irq 23, io mem 0xfbb22000 [ 5.291320] scsi host3: ahci [ 5.297624] isci 0000:04:00.0: driver configured for rev: 6 silicon [ 5.303419] scsi host4: ahci [ 5.305432] ehci-pci 0000:00:1d.0: USB 2.0 started, EHCI 1.00 [ 5.305514] usb usb2: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 6.01 [ 5.305518] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 5.305520] usb usb2: Product: EHCI Host Controller [ 5.305522] usb usb2: Manufacturer: Linux 6.1.0-21-amd64 ehci_hcd [ 5.305524] usb usb2: SerialNumber: 0000:00:1d.0 [ 5.315102] hub 2-0:1.0: USB hub found [ 5.315331] e1000e 0000:06:00.0 0000:06:00.0 (uninitialized): registered PHC clock [ 5.315879] scsi host5: ahci [ 5.321847] hub 2-0:1.0: 2 ports detected [ 5.324725] isci 0000:04:00.0: OEM parameter table found in OROM [ 5.324729] isci 0000:04:00.0: OEM SAS parameters (version: 1.0) loaded (platform) [ 5.330353] isci 0000:04:00.0: SCU controller 0: phy 3-0 cables: {short, short, short, short} [ 5.330359] ata1: SATA max UDMA/133 abar m2048@0xfbb21000 port 0xfbb21100 irq 32 [ 5.330363] ata2: SATA max UDMA/133 abar m2048@0xfbb21000 port 0xfbb21180 irq 32 [ 5.330366] ata3: SATA max UDMA/133 abar m2048@0xfbb21000 port 0xfbb21200 irq 32 [ 5.330368] ata4: SATA max UDMA/133 abar m2048@0xfbb21000 port 0xfbb21280 irq 32 [ 5.330371] ata5: SATA max UDMA/133 abar m2048@0xfbb21000 port 0xfbb21300 irq 32 [ 5.330373] ata6: SATA max UDMA/133 abar m2048@0xfbb21000 port 0xfbb21380 irq 32 [ 5.374952] e1000e 0000:06:00.0 eth1: (PCI Express:2.5GT/s:Width x1) 00:25:90:eb:25:a7 [ 5.380009] scsi host6: isci [ 5.384821] e1000e 0000:06:00.0 eth1: Intel(R) PRO/1000 Network Connection [ 5.455433] e1000e 0000:06:00.0 eth1: MAC: 3, PHY: 8, PBA No: FFFFFF-0FF [ 5.505466] usb 1-1: new high-speed USB device number 2 using ehci-pci [ 5.593460] usb 2-1: new high-speed USB device number 2 using ehci-pci [ 5.644384] ata5: SATA link down (SStatus 0 SControl 300) [ 5.649826] ata3: SATA link down (SStatus 0 SControl 300) [ 5.655256] ata4: SATA link down (SStatus 0 SControl 300) [ 5.660687] ata2: SATA link down (SStatus 0 SControl 300) [ 5.666121] ata1: SATA link up 6.0 Gbps (SStatus 133 SControl 300) [ 5.672333] ata6: SATA link down (SStatus 0 SControl 300) [ 5.677839] ata1.00: ATA-8: WDC WD1003FBYZ-010FB0, 01.01V03, max UDMA/133 [ 5.678410] usb 1-1: New USB device found, idVendor=8087, idProduct=0024, bcdDevice= 0.00 [ 5.684954] ata1.00: 1953525168 sectors, multi 16: LBA48 NCQ (depth 32), AA [ 5.692827] usb 1-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0 [ 5.700635] ata1.00: configured for UDMA/133 [ 5.707542] hub 1-1:1.0: USB hub found [ 5.711278] scsi: waiting for bus probes to complete ... [ 5.715169] hub 1-1:1.0: 6 ports detected [ 5.766149] usb 2-1: New USB device found, idVendor=8087, idProduct=0024, bcdDevice= 0.00 [ 5.774343] usb 2-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0 [ 5.782217] hub 2-1:1.0: USB hub found [ 5.786191] hub 2-1:1.0: 8 ports detected [ 5.825678] scsi 0:0:0:0: Direct-Access ATA WDC WD1003FBYZ-0 1V03 PQ: 0 ANSI: 5 [ 5.837021] e1000e 0000:05:00.0 enx002590eb25a6: renamed from eth0 [ 5.861591] sd 0:0:0:0: [sda] 1953525168 512-byte logical blocks: (1.00 TB/932 GiB) [ 5.869291] sd 0:0:0:0: [sda] Write Protect is off [ 5.869695] e1000e 0000:06:00.0 enx002590eb25a7: renamed from eth1 [ 5.874087] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00 [ 5.874108] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 5.889344] sd 0:0:0:0: [sda] Preferred minimum I/O size 512 bytes [ 5.922355] sda: sda1 sda2 < sda5 > [ 5.926263] sd 0:0:0:0: [sda] Attached SCSI disk [ 6.017456] usb 1-1.1: new full-speed USB device number 3 using ehci-pci [ 6.131397] usb 1-1.1: New USB device found, idVendor=0557, idProduct=2221, bcdDevice= 0.01 [ 6.139762] usb 1-1.1: New USB device strings: Mfr=1, Product=2, SerialNumber=0 [ 6.147080] usb 1-1.1: Product: Hermon USB hidmouse Device [ 6.152567] usb 1-1.1: Manufacturer: Winbond Electronics Corp [ 6.171521] hid: raw HID events driver (C) Jiri Kosina [ 6.183585] usbcore: registered new interface driver usbhid [ 6.189192] usbhid: USB HID core driver [ 6.195908] input: Winbond Electronics Corp Hermon USB hidmouse Device as /devices/pci0000:00/0000:00:1a.0/usb1/1-1/1-1.1/1-1.1:1.0/0003:0557:2221.0001/input/input3 [ 6.210771] hid-generic 0003:0557:2221.0001: input,hidraw0: USB HID v1.00 Mouse [Winbond Electronics Corp Hermon USB hidmouse Device] on usb-0000:00:1a.0-1.1/input0 [ 6.225688] input: Winbond Electronics Corp Hermon USB hidmouse Device as /devices/pci0000:00/0000:00:1a.0/usb1/1-1/1-1.1/1-1.1:1.1/0003:0557:2221.0002/input/input4 [ 6.244207] device-mapper: core: CONFIG_IMA_DISABLE_HTABLE is disabled. Duplicate IMA measurements will not be recorded in the IMA log. [ 6.256458] device-mapper: uevent: version 1.0.3 [ 6.261207] device-mapper: ioctl: 4.47.0-ioctl (2022-07-28) initialised: dm-devel@redhat.com [ 6.297652] hid-generic 0003:0557:2221.0002: input,hidraw1: USB HID v1.00 Keyboard [Winbond Electronics Corp Hermon USB hidmouse Device] on usb-0000:00:1a.0-1.1/input1 [ 6.964239] PM: Image not found (code -22) [ 7.356198] EXT4-fs (dm-0): mounting ext3 file system using the ext4 subsystem [ 7.367506] EXT4-fs (dm-0): mounted filesystem with ordered data mode. Quota mode: none. [ 7.548193] Not activating Mandatory Access Control as /sbin/tomoyo-init does not exist. [ 9.183890] input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input5 [ 9.205455] ACPI: button: Power Button [PWRB] [ 9.209931] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input6 [ 9.217405] ACPI: button: Power Button [PWRF] [ 9.221848] dca service started, version 1.12.1 [ 9.354946] input: PC Speaker as /devices/platform/pcspkr/input/input7 [ 9.370507] IPMI message handler: version 39.2 [ 9.455077] ipmi device interface [ 9.500016] ipmi_si: IPMI System Interface driver [ 9.500394] ioatdma: Intel(R) QuickData Technology Driver 5.00 [ 9.510646] ipmi_si dmi-ipmi-si.0: ipmi_platform: probing via SMBIOS [ 9.517028] ipmi_platform: ipmi_si: SMBIOS: io 0xca2 regsize 1 spacing 1 irq 0 [ 9.524928] ipmi_si: Adding SMBIOS-specified kcs state machine [ 9.530983] ipmi_si IPI0001:00: ipmi_platform: probing via ACPI [ 9.531693] sd 0:0:0:0: Attached scsi generic sg0 type 0 [ 9.537050] ipmi_si IPI0001:00: ipmi_platform: [io 0x0ca2] regsize 1 spacing 1 irq 0 [ 9.593869] mei_me 0000:00:16.0: Device doesn't have valid ME Interface [ 9.600640] iTCO_vendor_support: vendor-support=0 [ 9.609407] ipmi_si dmi-ipmi-si.0: Removing SMBIOS-specified kcs state machine in favor of ACPI [ 9.618124] ipmi_si: Adding ACPI-specified kcs state machine [ 9.623898] ipmi_si: Trying ACPI-specified kcs state machine at i/o address 0xca2, slave address 0x0, irq 0 [ 9.640552] RAPL PMU: API unit is 2^-32 Joules, 3 fixed counters, 163840 ms ovfl timer [ 9.648483] RAPL PMU: hw unit of domain pp0-core 2^-16 Joules [ 9.654231] RAPL PMU: hw unit of domain package 2^-16 Joules [ 9.659890] RAPL PMU: hw unit of domain dram 2^-16 Joules [ 9.667470] iTCO_wdt iTCO_wdt.1.auto: unable to reset NO_REBOOT flag, device disabled by hardware/BIOS [ 9.740235] ACPI: bus type drm_connector registered [ 9.746511] cryptd: max_cpu_qlen set to 1000 [ 9.817623] AVX version of gcm_enc/dec engaged. [ 9.822221] AES CTR mode by8 optimization enabled [ 9.961482] ipmi_si IPI0001:00: The BMC does not support clearing the recv irq bit, compensating, but the BMC needs to be fixed. [ 10.007432] mgag200 0000:07:01.0: vgaarb: deactivate vga console [ 10.018556] Console: switching to colour dummy device 80x25 [ 10.030170] [drm] Initialized mgag200 1.0.0 20110418 for 0000:07:01.0 on minor 0 [ 10.039468] fbcon: mgag200drmfb (fb0) is primary device [ 10.047645] ipmi_si IPI0001:00: IPMI message handler: Found new BMC (man_id: 0x002a7c, prod_id: 0x0703, dev_id: 0x20) [ 10.121366] ipmi_si IPI0001:00: IPMI kcs interface initialized [ 10.178969] ipmi_ssif: IPMI SSIF Interface driver [ 10.408282] Console: switching to colour frame buffer device 128x48 [ 10.509405] mgag200 0000:07:01.0: [drm] fb0: mgag200drmfb frame buffer device [ 10.954738] EDAC sbridge: Seeking for: PCI ID 8086:0ea0 [ 10.954766] EDAC sbridge: Seeking for: PCI ID 8086:0ea0 [ 10.954773] EDAC sbridge: Seeking for: PCI ID 8086:0e60 [ 10.954781] EDAC sbridge: Seeking for: PCI ID 8086:0ea8 [ 10.954789] EDAC sbridge: Seeking for: PCI ID 8086:0ea8 [ 10.954793] EDAC sbridge: Seeking for: PCI ID 8086:0e71 [ 10.954801] EDAC sbridge: Seeking for: PCI ID 8086:0e71 [ 10.954805] EDAC sbridge: Seeking for: PCI ID 8086:0eaa [ 10.954813] EDAC sbridge: Seeking for: PCI ID 8086:0eaa [ 10.954817] EDAC sbridge: Seeking for: PCI ID 8086:0eab [ 10.954825] EDAC sbridge: Seeking for: PCI ID 8086:0eab [ 10.954828] EDAC sbridge: Seeking for: PCI ID 8086:0eac [ 10.954837] EDAC sbridge: Seeking for: PCI ID 8086:0eac [ 10.954841] EDAC sbridge: Seeking for: PCI ID 8086:0ead [ 10.954849] EDAC sbridge: Seeking for: PCI ID 8086:0ead [ 10.954852] EDAC sbridge: Seeking for: PCI ID 8086:0e68 [ 10.954860] EDAC sbridge: Seeking for: PCI ID 8086:0e79 [ 10.954868] EDAC sbridge: Seeking for: PCI ID 8086:0e6a [ 10.954875] EDAC sbridge: Seeking for: PCI ID 8086:0e6b [ 10.954883] EDAC sbridge: Seeking for: PCI ID 8086:0e6c [ 10.954891] EDAC sbridge: Seeking for: PCI ID 8086:0e6d [ 10.954899] EDAC sbridge: Seeking for: PCI ID 8086:0eb8 [ 10.954906] EDAC sbridge: Seeking for: PCI ID 8086:0ebc [ 10.954914] EDAC sbridge: Seeking for: PCI ID 8086:0ec8 [ 10.954924] EDAC sbridge: Seeking for: PCI ID 8086:0ec8 [ 10.954926] EDAC sbridge: Seeking for: PCI ID 8086:0ec9 [ 10.954936] EDAC sbridge: Seeking for: PCI ID 8086:0ec9 [ 10.954938] EDAC sbridge: Seeking for: PCI ID 8086:0eca [ 10.954948] EDAC sbridge: Seeking for: PCI ID 8086:0eca [ 10.955085] EDAC MC0: Giving out device to module sb_edac controller Ivy Bridge SrcID#0_Ha#0: DEV 0000:ff:0e.0 (INTERRUPT) [ 10.966159] EDAC sbridge: Ver: 1.1.2 [ 11.060642] intel_rapl_common: Found RAPL domain package [ 11.065976] intel_rapl_common: Found RAPL domain core [ 11.071040] intel_rapl_common: Found RAPL domain dram [ 12.314838] EXT4-fs (dm-0): re-mounted. Quota mode: none. [ 13.422292] EXT4-fs (sda1): mounting ext3 file system using the ext4 subsystem [ 13.456206] EXT4-fs (sda1): mounted filesystem with ordered data mode. Quota mode: none. [ 13.504361] Adding 1949692k swap on /dev/mapper/fiano1--vg-swap_1. Priority:-2 extents:1 across:1949692k FS [ 14.151056] audit: type=1400 audit(1719362045.172:2): apparmor="STATUS" operation="profile_load" profile="unconfined" name="lsb_release" pid=1067 comm="apparmor_parser" [ 14.166638] audit: type=1400 audit(1719362045.172:3): apparmor="STATUS" operation="profile_load" profile="unconfined" name="nvidia_modprobe" pid=1068 comm="apparmor_parser" [ 14.182032] audit: type=1400 audit(1719362045.172:4): apparmor="STATUS" operation="profile_load" profile="unconfined" name="nvidia_modprobe//kmod" pid=1068 comm="apparmor_parser" [ 14.212565] audit: type=1400 audit(1719362045.232:5): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/bin/man" pid=1070 comm="apparmor_parser" [ 14.228919] audit: type=1400 audit(1719362045.232:6): apparmor="STATUS" operation="profile_load" profile="unconfined" name="man_filter" pid=1070 comm="apparmor_parser" [ 14.243879] audit: type=1400 audit(1719362045.232:7): apparmor="STATUS" operation="profile_load" profile="unconfined" name="man_groff" pid=1070 comm="apparmor_parser" [ 14.407862] audit: type=1400 audit(1719362045.428:8): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=1069 comm="apparmor_parser" [ 14.425888] audit: type=1400 audit(1719362045.432:9): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/NetworkManager/nm-dhcp-helper" pid=1069 comm="apparmor_parser" [ 14.443251] audit: type=1400 audit(1719362045.432:10): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/connman/scripts/dhclient-script" pid=1069 comm="apparmor_parser" [ 14.460877] audit: type=1400 audit(1719362045.436:11): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/{,usr/}sbin/dhclient" pid=1069 comm="apparmor_parser" [ 17.874505] e1000e 0000:05:00.0 enx002590eb25a6: NIC Link is Up 1000 Mbps Full Duplex, Flow Control: None [ 17.884425] IPv6: ADDRCONF(NETDEV_CHANGE): enx002590eb25a6: link becomes ready