[ 0.000000] Linux version 6.1.95+ (osstest@himrod1) (gcc (Debian 12.2.0-14) 12.2.0, GNU ld (GNU Binutils for Debian) 2.40) #1 SMP PREEMPT_DYNAMIC Wed Jun 26 06:11:45 UTC 2024 [ 0.000000] Command line: placeholder root=/dev/mapper/debina0--vg-root ro console=hvc0 [ 0.000000] Released 0 page(s) [ 0.000000] BIOS-provided physical RAM map: [ 0.000000] Xen: [mem 0x0000000000000000-0x0000000000099fff] usable [ 0.000000] Xen: [mem 0x000000000009ac00-0x00000000000fffff] reserved [ 0.000000] Xen: [mem 0x0000000000100000-0x0000000020065fff] usable [ 0.000000] Xen: [mem 0x00000000796ef000-0x00000000798bdfff] reserved [ 0.000000] Xen: [mem 0x00000000799b7000-0x0000000079e5afff] ACPI NVS [ 0.000000] Xen: [mem 0x0000000079e5b000-0x000000007bdb0fff] reserved [ 0.000000] Xen: [mem 0x000000007bdb2000-0x000000007be37fff] reserved [ 0.000000] Xen: [mem 0x0000000080000000-0x000000008fffffff] reserved [ 0.000000] Xen: [mem 0x00000000fbffc000-0x00000000fbffcfff] reserved [ 0.000000] Xen: [mem 0x00000000fec00000-0x00000000fec00fff] reserved [ 0.000000] Xen: [mem 0x00000000fed1c000-0x00000000fed1ffff] reserved [ 0.000000] Xen: [mem 0x00000000fee00000-0x00000000feefffff] reserved [ 0.000000] Xen: [mem 0x00000000ff000000-0x00000000ffffffff] reserved [ 0.000000] NX (Execute Disable) protection: active [ 0.000000] SMBIOS 2.8 present. [ 0.000000] DMI: Supermicro SYS-5018D-FN8T/X10SDV-TP8F, BIOS 1.0b 11/21/2016 [ 0.000000] Hypervisor detected: Xen PV [ 0.000460] tsc: Detected 2199.998 MHz processor [ 0.000903] e820: update [mem 0x00000000-0x00000fff] usable ==> reserved [ 0.000906] e820: remove [mem 0x000a0000-0x000fffff] usable [ 0.000913] last_pfn = 0x20066 max_arch_pfn = 0x400000000 [ 0.000915] Disabled [ 0.000916] x86/PAT: MTRRs disabled, skipping PAT initialization too. [ 0.000920] x86/PAT: Configuration [0-7]: WB WT UC- UC WC WP UC UC [ 0.000959] Kernel/User page tables isolation: disabled on XEN PV. [ 0.027764] RAMDISK: [mem 0x04000000-0x0536afff] [ 0.027772] ACPI: Early table checksum verification disabled [ 0.028372] ACPI: RSDP 0x00000000000F0580 000024 (v02 SUPERM) [ 0.028384] ACPI: XSDT 0x00000000799FF098 0000B4 (v01 SUPERM SMCI--MB 01072009 AMI 00010013) [ 0.028421] ACPI: FACP 0x0000000079A17AC0 00010C (v05 SUPERM SMCI--MB 01072009 AMI 00010013) [ 0.028469] ACPI: DSDT 0x00000000799FF1E8 0188D5 (v02 SUPERM SMCI--MB 01072009 INTL 20091013) [ 0.028485] ACPI: FACS 0x0000000079E59F80 000040 [ 0.028501] ACPI: APIC 0x0000000079A17BD0 0000BC (v03 SUPERM SMCI--MB 01072009 AMI 00010013) [ 0.028517] ACPI: FPDT 0x0000000079A17C90 000044 (v01 SUPERM SMCI--MB 01072009 AMI 00010013) [ 0.028533] ACPI: FIDT 0x0000000079A17CD8 00009C (v01 SUPERM SMCI--MB 01072009 AMI 00010013) [ 0.028548] ACPI: MCFG 0x0000000079A17D78 00003C (v01 SUPERM SMCI--MB 01072009 MSFT 00000097) [ 0.028564] ACPI: UEFI 0x0000000079A17DB8 000042 (v01 00000000 00000000) [ 0.028581] ACPI: DBG2 0x0000000079A17E00 000072 (v00 SUPERM SMCI--MB 00000000 INTL 20091013) [ 0.028597] ACPI: HPET 0x0000000079A17E78 000038 (v01 SUPERM SMCI--MB 00000001 INTL 20091013) [ 0.028613] ACPI: WDDT 0x0000000079A17EB0 000040 (v01 SUPERM SMCI--MB 00000000 INTL 20091013) [ 0.028629] ACPI: SSDT 0x0000000079A17EF0 00ED8B (v01 AMI PmMgt 00000001 INTL 20120913) [ 0.028645] ACPI: SSDT 0x0000000079A26C80 002285 (v02 SUPERM SpsNm 00000002 INTL 20120913) [ 0.028661] ACPI: SSDT 0x0000000079A28F08 000064 (v02 SUPERM SpsNvs 00000002 INTL 20120913) [ 0.028681] ACPI: PRAD 0x0000000079A28F70 000102 (v02 SUPERM SMCI--MB 00000002 INTL 20120913) [ 0.028697] ACPI: RMAD 0x0000000079A29078 0000CC (v01 SUPERM SMCI--MB 00000001 INTL 20091013) [ 0.028713] ACPI: HEST 0x0000000079A29148 0000A8 (v01 SUPERM SMCI--MB 00000001 INTL 00000001) [ 0.028729] ACPI: BERT 0x0000000079A291F0 000030 (v01 SUPERM SMCI--MB 00000001 INTL 00000001) [ 0.028745] ACPI: ERST 0x0000000079A29220 000230 (v01 SUPERM SMCI--MB 00000001 INTL 00000001) [ 0.028761] ACPI: EINJ 0x0000000079A29450 000130 (v01 SUPERM SMCI--MB 00000001 INTL 00000001) [ 0.028769] ACPI: Reserving FACP table memory at [mem 0x79a17ac0-0x79a17bcb] [ 0.028771] ACPI: Reserving DSDT table memory at [mem 0x799ff1e8-0x79a17abc] [ 0.028772] ACPI: Reserving FACS table memory at [mem 0x79e59f80-0x79e59fbf] [ 0.028773] ACPI: Reserving APIC table memory at [mem 0x79a17bd0-0x79a17c8b] [ 0.028774] ACPI: Reserving FPDT table memory at [mem 0x79a17c90-0x79a17cd3] [ 0.028775] ACPI: Reserving FIDT table memory at [mem 0x79a17cd8-0x79a17d73] [ 0.028776] ACPI: Reserving MCFG table memory at [mem 0x79a17d78-0x79a17db3] [ 0.028777] ACPI: Reserving UEFI table memory at [mem 0x79a17db8-0x79a17df9] [ 0.028778] ACPI: Reserving DBG2 table memory at [mem 0x79a17e00-0x79a17e71] [ 0.028779] ACPI: Reserving HPET table memory at [mem 0x79a17e78-0x79a17eaf] [ 0.028780] ACPI: Reserving WDDT table memory at [mem 0x79a17eb0-0x79a17eef] [ 0.028781] ACPI: Reserving SSDT table memory at [mem 0x79a17ef0-0x79a26c7a] [ 0.028782] ACPI: Reserving SSDT table memory at [mem 0x79a26c80-0x79a28f04] [ 0.028783] ACPI: Reserving SSDT table memory at [mem 0x79a28f08-0x79a28f6b] [ 0.028784] ACPI: Reserving PRAD table memory at [mem 0x79a28f70-0x79a29071] [ 0.028785] ACPI: Reserving RMAD table memory at [mem 0x79a29078-0x79a29143] [ 0.028786] ACPI: Reserving HEST table memory at [mem 0x79a29148-0x79a291ef] [ 0.028787] ACPI: Reserving BERT table memory at [mem 0x79a291f0-0x79a2921f] [ 0.028788] ACPI: Reserving ERST table memory at [mem 0x79a29220-0x79a2944f] [ 0.028789] ACPI: Reserving EINJ table memory at [mem 0x79a29450-0x79a2957f] [ 0.028834] Setting APIC routing to Xen PV. [ 0.032798] Zone ranges: [ 0.032800] DMA [mem 0x0000000000001000-0x0000000000ffffff] [ 0.032802] DMA32 [mem 0x0000000001000000-0x0000000020065fff] [ 0.032804] Normal empty [ 0.032805] Movable zone start for each node [ 0.032806] Early memory node ranges [ 0.032806] node 0: [mem 0x0000000000001000-0x0000000000099fff] [ 0.032808] node 0: [mem 0x0000000000100000-0x0000000020065fff] [ 0.032810] Initmem setup node 0 [mem 0x0000000000001000-0x0000000020065fff] [ 0.032815] On node 0, zone DMA: 1 pages in unavailable ranges [ 0.032852] On node 0, zone DMA: 102 pages in unavailable ranges [ 0.034398] On node 0, zone DMA32: 32666 pages in unavailable ranges [ 0.034402] p2m virtual area at (____ptrval____), size is 40000000 [ 0.221913] Remapped 102 page(s) [ 0.223285] ACPI: PM-Timer IO Port: 0x408 [ 0.223338] ACPI: LAPIC_NMI (acpi_id[0x00] high level lint[0x1]) [ 0.223341] ACPI: LAPIC_NMI (acpi_id[0x02] high level lint[0x1]) [ 0.223342] ACPI: LAPIC_NMI (acpi_id[0x04] high level lint[0x1]) [ 0.223344] ACPI: LAPIC_NMI (acpi_id[0x06] high level lint[0x1]) [ 0.223345] ACPI: LAPIC_NMI (acpi_id[0x01] high level lint[0x1]) [ 0.223347] ACPI: LAPIC_NMI (acpi_id[0x03] high level lint[0x1]) [ 0.223348] ACPI: LAPIC_NMI (acpi_id[0x05] high level lint[0x1]) [ 0.223350] ACPI: LAPIC_NMI (acpi_id[0x07] high level lint[0x1]) [ 0.223378] IOAPIC[0]: apic_id 8, version 32, address 0xfec00000, GSI 0-23 [ 0.223392] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl) [ 0.223395] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level) [ 0.223420] ACPI: Using ACPI (MADT) for SMP configuration information [ 0.223425] ACPI: HPET id: 0x8086a701 base: 0xfed00000 [ 0.223495] smpboot: Allowing 8 CPUs, 0 hotplug CPUs [ 0.223510] PM: hibernation: Registered nosave memory: [mem 0x00000000-0x00000fff] [ 0.223512] PM: hibernation: Registered nosave memory: [mem 0x0009a000-0x0009afff] [ 0.223513] PM: hibernation: Registered nosave memory: [mem 0x0009b000-0x000fffff] [ 0.223515] [mem 0x90000000-0xfbffbfff] available for PCI devices [ 0.223520] Booting kernel on Xen [ 0.223521] Xen version: 4.19-unstable (preserve-AD) [ 0.223524] clocksource: refined-jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 1910969940391419 ns [ 0.229727] setup_percpu: NR_CPUS:64 nr_cpumask_bits:8 nr_cpu_ids:8 nr_node_ids:1 [ 0.230010] percpu: Embedded 54 pages/cpu s180520 r8192 d32472 u262144 [ 0.230016] pcpu-alloc: s180520 r8192 d32472 u262144 alloc=1*2097152 [ 0.230019] pcpu-alloc: [0] 0 1 2 3 4 5 6 7 [ 0.230097] xen: PV spinlocks enabled [ 0.230100] PV qspinlock hash table entries: 256 (order: 0, 4096 bytes, linear) [ 0.230105] Built 1 zonelists, mobility grouping on. Total pages: 129006 [ 0.230107] Kernel command line: placeholder root=/dev/mapper/debina0--vg-root ro console=hvc0 [ 0.230145] Unknown kernel command line parameters "placeholder", will be passed to user space. [ 0.230155] random: crng init done [ 0.230204] Dentry cache hash table entries: 65536 (order: 7, 524288 bytes, linear) [ 0.230229] Inode-cache hash table entries: 32768 (order: 6, 262144 bytes, linear) [ 0.231547] mem auto-init: stack:all(zero), heap alloc:off, heap free:off [ 0.231550] software IO TLB: area num 8. [ 0.291091] Memory: 390032K/524284K available (14349K kernel code, 2682K rwdata, 4576K rodata, 1576K init, 1296K bss, 134000K reserved, 0K cma-reserved) [ 0.291262] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=8, Nodes=1 [ 0.293774] Dynamic Preempt: voluntary [ 0.293874] rcu: Preemptible hierarchical RCU implementation. [ 0.293875] rcu: RCU event tracing is enabled. [ 0.293876] rcu: RCU restricting CPUs from NR_CPUS=64 to nr_cpu_ids=8. [ 0.293877] Trampoline variant of Tasks RCU enabled. [ 0.293878] rcu: RCU calculated value of scheduler-enlistment delay is 100 jiffies. [ 0.293879] rcu: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=8 [ 0.304365] NR_IRQS: 4352, nr_irqs: 488, preallocated irqs: 16 [ 0.304489] xen:events: Using FIFO-based ABI [ 0.304512] xen: --> pirq=1 -> irq=1 (gsi=1) [ 0.304521] xen: --> pirq=2 -> irq=2 (gsi=2) [ 0.304529] xen: --> pirq=3 -> irq=3 (gsi=3) [ 0.304536] xen: --> pirq=4 -> irq=4 (gsi=4) [ 0.304543] xen: --> pirq=5 -> irq=5 (gsi=5) [ 0.304551] xen: --> pirq=6 -> irq=6 (gsi=6) [ 0.304558] xen: --> pirq=7 -> irq=7 (gsi=7) [ 0.304565] xen: --> pirq=8 -> irq=8 (gsi=8) [ 0.304573] xen: --> pirq=9 -> irq=9 (gsi=9) [ 0.304580] xen: --> pirq=10 -> irq=10 (gsi=10) [ 0.304588] xen: --> pirq=11 -> irq=11 (gsi=11) [ 0.304595] xen: --> pirq=12 -> irq=12 (gsi=12) [ 0.304603] xen: --> pirq=13 -> irq=13 (gsi=13) [ 0.304612] xen: --> pirq=14 -> irq=14 (gsi=14) [ 0.304619] xen: --> pirq=15 -> irq=15 (gsi=15) [ 0.304630] rcu: srcu_init: Setting srcu_struct sizes based on contention. [ 0.309992] Console: colour VGA+ 80x25 [ 0.324816] printk: console [tty0] enabled [ 0.326153] printk: console [hvc0] enabled [ 0.326292] ACPI: Core revision 20220331 [ 0.341786] clocksource: xen: mask: 0xffffffffffffffff max_cycles: 0x1cd42e4dffb, max_idle_ns: 881590591483 ns [ 0.341953] Xen: using vcpuop timer interface [ 0.341961] installing Xen timer for CPU 0 [ 0.342111] clocksource: tsc-early: mask: 0xffffffffffffffff max_cycles: 0x1fb63109b96, max_idle_ns: 440795265316 ns [ 0.342271] Calibrating delay loop (skipped), value calculated using timer frequency.. 4399.99 BogoMIPS (lpj=2199998) [ 0.342601] Last level iTLB entries: 4KB 64, 2MB 8, 4MB 8 [ 0.342719] Last level dTLB entries: 4KB 64, 2MB 0, 4MB 0, 1GB 4 [ 0.342846] Spectre V1 : Mitigation: usercopy/swapgs barriers and __user pointer sanitization [ 0.342996] Spectre V2 : Mitigation: Retpolines [ 0.343277] Spectre V2 : Spectre v2 / SpectreRSB mitigation: Filling RSB on context switch [ 0.343424] Spectre V2 : Spectre v2 / SpectreRSB : Filling RSB on VMEXIT [ 0.343544] Spectre V2 : Enabling Restricted Speculation for firmware calls [ 0.343666] Spectre V2 : mitigation: Enabling conditional Indirect Branch Prediction Barrier [ 0.343815] Spectre V2 : User space: Mitigation: STIBP via prctl [ 0.343933] Speculative Store Bypass: Mitigation: Speculative Store Bypass disabled via prctl [ 0.344086] MDS: Mitigation: Clear CPU buffers [ 0.344200] TAA: Mitigation: Clear CPU buffers [ 0.344274] MMIO Stale Data: Vulnerable: Clear CPU buffers attempted, no microcode [ 0.344441] x86/fpu: Supporting XSAVE feature 0x001: 'x87 floating point registers' [ 0.344589] x86/fpu: Supporting XSAVE feature 0x002: 'SSE registers' [ 0.344730] x86/fpu: Supporting XSAVE feature 0x004: 'AVX registers' [ 0.344850] x86/fpu: xstate_offset[2]: 576, xstate_sizes[2]: 256 [ 0.344970] x86/fpu: Enabled xstate features 0x7, context size is 832 bytes, using 'standard' format. [ 0.362712] Freeing SMP alternatives memory: 40K [ 0.362839] pid_max: default: 32768 minimum: 301 [ 0.363292] LSM: Security Framework initializing [ 0.363415] SELinux: Initializing. [ 0.363562] Mount-cache hash table entries: 1024 (order: 1, 8192 bytes, linear) [ 0.363709] Mountpoint-cache hash table entries: 1024 (order: 1, 8192 bytes, linear) [ 0.364363] cpu 0 spinlock event irq 25 [ 0.364484] VPMU disabled by hypervisor. [ 0.364919] cblist_init_generic: Setting adjustable number of callback queues. [ 0.365065] cblist_init_generic: Setting shift to 3 and lim to 1. [ 0.365222] Performance Events: unsupported p6 CPU model 86 no PMU driver, software events only. [ 0.365275] signal: max sigframe size: 1776 [ 0.365439] rcu: Hierarchical SRCU implementation. [ 0.365562] rcu: Max phase no-delay instances is 400. [ 0.366053] smp: Bringing up secondary CPUs ... [ 0.366390] installing Xen timer for CPU 1 [ 0.366858] cpu 1 spinlock event irq 35 [ 0.367411] MDS CPU bug present and SMT on, data leak possible. See https://www.kernel.org/doc/html/latest/admin-guide/hw-vuln/mds.html for more details. [ 0.367580] TAA CPU bug present and SMT on, data leak possible. See https://www.kernel.org/doc/html/latest/admin-guide/hw-vuln/tsx_async_abort.html for more details. [ 0.367770] MMIO Stale Data CPU bug present and SMT on, data leak possible. See https://www.kernel.org/doc/html/latest/admin-guide/hw-vuln/processor_mmio_stale_data.html for more details. [ 0.368493] installing Xen timer for CPU 2 [ 0.368971] cpu 2 spinlock event irq 41 [ 0.369375] installing Xen timer for CPU 3 [ 0.369807] cpu 3 spinlock event irq 47 [ 0.369807] installing Xen timer for CPU 4 [ 0.370612] cpu 4 spinlock event irq 53 [ 0.370612] installing Xen timer for CPU 5 [ 0.371432] cpu 5 spinlock event irq 59 [ 0.371476] installing Xen timer for CPU 6 [ 0.372314] cpu 6 spinlock event irq 65 [ 0.372526] installing Xen timer for CPU 7 [ 0.372978] cpu 7 spinlock event irq 71 [ 0.373471] smp: Brought up 1 node, 8 CPUs [ 0.373595] smpboot: Max logical packages: 1 [ 0.373814] devtmpfs: initialized [ 0.373814] x86/mm: Memory block size: 128MB [ 0.374508] ACPI: PM: Registering ACPI NVS region [mem 0x799b7000-0x79e5afff] (4866048 bytes) [ 0.374536] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 1911260446275000 ns [ 0.374696] futex hash table entries: 2048 (order: 5, 131072 bytes, linear) [ 0.375274] PM: RTC time: 06:39:36, date: 2024-06-26 [ 0.375536] NET: Registered PF_NETLINK/PF_ROUTE protocol family [ 0.375679] xen:grant_table: Grant tables using version 1 layout [ 0.375815] Grant table initialized [ 0.376119] audit: initializing netlink subsys (disabled) [ 0.376291] audit: type=2000 audit(1719383977.045:1): state=initialized audit_enabled=0 res=1 [ 0.376369] thermal_sys: Registered thermal governor 'step_wise' [ 0.376369] thermal_sys: Registered thermal governor 'user_space' [ 0.376500] ACPI FADT declares the system doesn't support PCIe ASPM, so disable it [ 0.376932] PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0x80000000-0x8fffffff] (base 0x80000000) [ 0.377430] PCI: MMCONFIG at [mem 0x80000000-0x8fffffff] reserved in E820 [ 0.506226] PCI: Using configuration type 1 for base access [ 0.508797] kprobes: kprobe jump-optimization is enabled. All kprobes are optimized if possible. [ 0.509332] ACPI: Added _OSI(Module Device) [ 0.509443] ACPI: Added _OSI(Processor Device) [ 0.509443] ACPI: Added _OSI(3.0 _SCP Extensions) [ 0.509443] ACPI: Added _OSI(Processor Aggregator Device) [ 0.539502] ACPI: 4 ACPI AML tables successfully acquired and loaded [ 0.541489] xen: registering gsi 9 triggering 0 polarity 0 [ 0.544030] ACPI: Dynamic OEM Table Load: [ 0.552310] ACPI: Interpreter enabled [ 0.552443] ACPI: PM: (supports S0 S4 S5) [ 0.552565] ACPI: Using IOAPIC for interrupt routing [ 0.552711] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug [ 0.552862] PCI: Using E820 reservations for host bridge windows [ 0.553437] ACPI: Enabled 6 GPEs in block 00 to 3F [ 0.579269] ACPI: PCI Root Bridge [UNC0] (domain 0000 [bus ff]) [ 0.579269] acpi PNP0A03:03: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI HPX-Type3] [ 0.579269] acpi PNP0A03:03: _OSC: platform does not support [LTR] [ 0.579269] acpi PNP0A03:03: _OSC: OS now controls [PME PCIeCapability] [ 0.579269] acpi PNP0A03:03: FADT indicates ASPM is unsupported, using BIOS configuration [ 0.580310] PCI host bridge to bus 0000:ff [ 0.580423] pci_bus 0000:ff: root bus resource [bus ff] [ 0.580617] pci 0000:ff:0b.0: [8086:6f81] type 00 class 0x088000 [ 0.581065] pci 0000:ff:0b.1: [8086:6f36] type 00 class 0x110100 [ 0.581497] pci 0000:ff:0b.2: [8086:6f37] type 00 class 0x110100 [ 0.581920] pci 0000:ff:0b.3: [8086:6f76] type 00 class 0x088000 [ 0.582363] pci 0000:ff:0c.0: [8086:6fe0] type 00 class 0x088000 [ 0.582785] pci 0000:ff:0c.1: [8086:6fe1] type 00 class 0x088000 [ 0.583205] pci 0000:ff:0c.2: [8086:6fe2] type 00 class 0x088000 [ 0.583600] pci 0000:ff:0c.3: [8086:6fe3] type 00 class 0x088000 [ 0.584047] pci 0000:ff:0f.0: [8086:6ff8] type 00 class 0x088000 [ 0.584483] pci 0000:ff:0f.4: [8086:6ffc] type 00 class 0x088000 [ 0.584905] pci 0000:ff:0f.5: [8086:6ffd] type 00 class 0x088000 [ 0.585335] pci 0000:ff:0f.6: [8086:6ffe] type 00 class 0x088000 [ 0.585761] pci 0000:ff:10.0: [8086:6f1d] type 00 class 0x088000 [ 0.586183] pci 0000:ff:10.1: [8086:6f34] type 00 class 0x110100 [ 0.586590] pci 0000:ff:10.5: [8086:6f1e] type 00 class 0x088000 [ 0.587013] pci 0000:ff:10.6: [8086:6f7d] type 00 class 0x110100 [ 0.587434] pci 0000:ff:10.7: [8086:6f1f] type 00 class 0x088000 [ 0.587860] pci 0000:ff:12.0: [8086:6fa0] type 00 class 0x088000 [ 0.588113] pci 0000:ff:12.1: [8086:6f30] type 00 class 0x110100 [ 0.588579] pci 0000:ff:13.0: [8086:6fa8] type 00 class 0x088000 [ 0.589052] pci 0000:ff:13.1: [8086:6f71] type 00 class 0x088000 [ 0.589529] pci 0000:ff:13.2: [8086:6faa] type 00 class 0x088000 [ 0.589998] pci 0000:ff:13.3: [8086:6fab] type 00 class 0x088000 [ 0.590474] pci 0000:ff:13.4: [8086:6fac] type 00 class 0x088000 [ 0.590940] pci 0000:ff:13.5: [8086:6fad] type 00 class 0x088000 [ 0.591399] pci 0000:ff:13.6: [8086:6fae] type 00 class 0x088000 [ 0.591823] pci 0000:ff:13.7: [8086:6faf] type 00 class 0x088000 [ 0.592254] pci 0000:ff:14.0: [8086:6fb0] type 00 class 0x088000 [ 0.592621] pci 0000:ff:14.1: [8086:6fb1] type 00 class 0x088000 [ 0.593088] pci 0000:ff:14.2: [8086:6fb2] type 00 class 0x088000 [ 0.593555] pci 0000:ff:14.3: [8086:6fb3] type 00 class 0x088000 [ 0.594013] pci 0000:ff:14.4: [8086:6fbc] type 00 class 0x088000 [ 0.594441] pci 0000:ff:14.5: [8086:6fbd] type 00 class 0x088000 [ 0.594881] pci 0000:ff:14.6: [8086:6fbe] type 00 class 0x088000 [ 0.595308] pci 0000:ff:14.7: [8086:6fbf] type 00 class 0x088000 [ 0.595741] pci 0000:ff:15.0: [8086:6fb4] type 00 class 0x088000 [ 0.596213] pci 0000:ff:15.1: [8086:6fb5] type 00 class 0x088000 [ 0.596621] pci 0000:ff:15.2: [8086:6fb6] type 00 class 0x088000 [ 0.597088] pci 0000:ff:15.3: [8086:6fb7] type 00 class 0x088000 [ 0.597611] pci 0000:ff:1e.0: [8086:6f98] type 00 class 0x088000 [ 0.598033] pci 0000:ff:1e.1: [8086:6f99] type 00 class 0x088000 [ 0.598464] pci 0000:ff:1e.2: [8086:6f9a] type 00 class 0x088000 [ 0.598898] pci 0000:ff:1e.3: [8086:6fc0] type 00 class 0x088000 [ 0.599147] pci 0000:ff:1e.4: [8086:6f9c] type 00 class 0x088000 [ 0.599587] pci 0000:ff:1f.0: [8086:6f88] type 00 class 0x088000 [ 0.600015] pci 0000:ff:1f.2: [8086:6f8a] type 00 class 0x088000 [ 0.600444] pci_bus 0000:ff: on NUMA node 0 [ 0.604738] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-fe]) [ 0.604866] acpi PNP0A08:00: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI HPX-Type3] [ 0.605142] acpi PNP0A08:00: _OSC: platform does not support [PME LTR] [ 0.605491] acpi PNP0A08:00: _OSC: OS now controls [PCIeCapability] [ 0.605612] acpi PNP0A08:00: FADT indicates ASPM is unsupported, using BIOS configuration [ 0.606094] PCI host bridge to bus 0000:00 [ 0.606209] pci_bus 0000:00: root bus resource [io 0x0000-0x0cf7 window] [ 0.606274] pci_bus 0000:00: root bus resource [io 0x1000-0xffff window] [ 0.606395] pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff window] [ 0.606540] pci_bus 0000:00: root bus resource [mem 0x90000000-0xfbffbfff window] [ 0.606685] pci_bus 0000:00: root bus resource [bus 00-fe] [ 0.606871] pci 0000:00:00.0: [8086:6f00] type 00 class 0x060000 [ 0.607508] pci 0000:00:01.0: [8086:6f02] type 01 class 0x060400 [ 0.608029] pci 0000:00:01.0: PME# supported from D0 D3hot D3cold [ 0.608415] pci 0000:00:01.1: [8086:6f03] type 01 class 0x060400 [ 0.608936] pci 0000:00:01.1: PME# supported from D0 D3hot D3cold [ 0.609325] pci 0000:00:02.0: [8086:6f04] type 01 class 0x060400 [ 0.609841] pci 0000:00:02.0: PME# supported from D0 D3hot D3cold [ 0.610195] pci 0000:00:02.2: [8086:6f06] type 01 class 0x060400 [ 0.610669] pci 0000:00:02.2: PME# supported from D0 D3hot D3cold [ 0.611046] pci 0000:00:03.0: [8086:6f08] type 01 class 0x060400 [ 0.611568] pci 0000:00:03.0: PME# supported from D0 D3hot D3cold [ 0.611934] pci 0000:00:03.2: [8086:6f0a] type 01 class 0x060400 [ 0.612456] pci 0000:00:03.2: PME# supported from D0 D3hot D3cold [ 0.612828] pci 0000:00:05.0: [8086:6f28] type 00 class 0x088000 [ 0.613404] pci 0000:00:05.1: [8086:6f29] type 00 class 0x088000 [ 0.614026] pci 0000:00:05.2: [8086:6f2a] type 00 class 0x088000 [ 0.614695] pci 0000:00:14.0: [8086:8c31] type 00 class 0x0c0330 [ 0.614913] pci 0000:00:14.0: reg 0x10: [mem 0xfb600000-0xfb60ffff 64bit] [ 0.615402] pci 0000:00:14.0: PME# supported from D3hot D3cold [ 0.615746] pci 0000:00:16.0: [8086:8c3a] type 00 class 0x078000 [ 0.615964] pci 0000:00:16.0: reg 0x10: [mem 0xfb617000-0xfb61700f 64bit] [ 0.616430] pci 0000:00:16.0: PME# supported from D0 D3hot D3cold [ 0.616735] pci 0000:00:16.1: [8086:8c3b] type 00 class 0x078000 [ 0.616953] pci 0000:00:16.1: reg 0x10: [mem 0xfb616000-0xfb61600f 64bit] [ 0.616953] pci 0000:00:16.1: PME# supported from D0 D3hot D3cold [ 0.616953] pci 0000:00:1a.0: [8086:8c2d] type 00 class 0x0c0320 [ 0.616971] pci 0000:00:1a.0: reg 0x10: [mem 0xfb614000-0xfb6143ff] [ 0.617269] pci 0000:00:1a.0: PME# supported from D0 D3hot D3cold [ 0.617269] pci 0000:00:1c.0: [8086:8c10] type 01 class 0x060400 [ 0.618376] pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold [ 0.618577] pci 0000:00:1c.0: Enabling MPC IRBNCE [ 0.618700] pci 0000:00:1c.0: Intel PCH root port ACS workaround enabled [ 0.626443] pci 0000:00:1c.1: [8086:8c12] type 01 class 0x060400 [ 0.627002] pci 0000:00:1c.1: PME# supported from D0 D3hot D3cold [ 0.627198] pci 0000:00:1c.1: Enabling MPC IRBNCE [ 0.627282] pci 0000:00:1c.1: Intel PCH root port ACS workaround enabled [ 0.627574] pci 0000:00:1c.3: [8086:8c16] type 01 class 0x060400 [ 0.628128] pci 0000:00:1c.3: PME# supported from D0 D3hot D3cold [ 0.628322] pci 0000:00:1c.3: Enabling MPC IRBNCE [ 0.628445] pci 0000:00:1c.3: Intel PCH root port ACS workaround enabled [ 0.628730] pci 0000:00:1c.4: [8086:8c18] type 01 class 0x060400 [ 0.629293] pci 0000:00:1c.4: PME# supported from D0 D3hot D3cold [ 0.629488] pci 0000:00:1c.4: Enabling MPC IRBNCE [ 0.629610] pci 0000:00:1c.4: Intel PCH root port ACS workaround enabled [ 0.629934] pci 0000:00:1d.0: [8086:8c26] type 00 class 0x0c0320 [ 0.630131] pci 0000:00:1d.0: reg 0x10: [mem 0xfb613000-0xfb6133ff] [ 0.630676] pci 0000:00:1d.0: PME# supported from D0 D3hot D3cold [ 0.630998] pci 0000:00:1f.0: [8086:8c54] type 00 class 0x060100 [ 0.631756] pci 0000:00:1f.2: [8086:8c02] type 00 class 0x010601 [ 0.631950] pci 0000:00:1f.2: reg 0x10: [io 0xf070-0xf077] [ 0.632109] pci 0000:00:1f.2: reg 0x14: [io 0xf060-0xf063] [ 0.632267] pci 0000:00:1f.2: reg 0x18: [io 0xf050-0xf057] [ 0.632423] pci 0000:00:1f.2: reg 0x1c: [io 0xf040-0xf043] [ 0.632581] pci 0000:00:1f.2: reg 0x20: [io 0xf020-0xf03f] [ 0.632739] pci 0000:00:1f.2: reg 0x24: [mem 0xfb612000-0xfb6127ff] [ 0.633052] pci 0000:00:1f.2: PME# supported from D3hot [ 0.633338] pci 0000:00:1f.3: [8086:8c22] type 00 class 0x0c0500 [ 0.633556] pci 0000:00:1f.3: reg 0x10: [mem 0xfb611000-0xfb6110ff 64bit] [ 0.633801] pci 0000:00:1f.3: reg 0x20: [io 0xf000-0xf01f] [ 0.634179] pci 0000:00:1f.6: [8086:8c24] type 00 class 0x118000 [ 0.634376] pci 0000:00:1f.6: reg 0x10: [mem 0xfb610000-0xfb610fff 64bit] [ 0.635088] pci 0000:00:01.0: PCI bridge to [bus 01] [ 0.635377] pci 0000:00:01.1: PCI bridge to [bus 02] [ 0.635709] pci 0000:03:00.0: [8086:6f50] type 00 class 0x088000 [ 0.635921] pci 0000:03:00.0: reg 0x10: [mem 0xfb506000-0xfb507fff 64bit] [ 0.636679] pci 0000:03:00.1: [8086:6f51] type 00 class 0x088000 [ 0.636892] pci 0000:03:00.1: reg 0x10: [mem 0xfb504000-0xfb505fff 64bit] [ 0.637599] pci 0000:03:00.2: [8086:6f52] type 00 class 0x088000 [ 0.637813] pci 0000:03:00.2: reg 0x10: [mem 0xfb502000-0xfb503fff 64bit] [ 0.638520] pci 0000:03:00.3: [8086:6f53] type 00 class 0x088000 [ 0.638733] pci 0000:03:00.3: reg 0x10: [mem 0xfb500000-0xfb501fff 64bit] [ 0.639431] pci 0000:00:02.0: PCI bridge to [bus 03] [ 0.639567] pci 0000:00:02.0: bridge window [mem 0xfb500000-0xfb5fffff] [ 0.639906] pci 0000:04:00.0: [8086:15ac] type 00 class 0x020000 [ 0.640118] pci 0000:04:00.0: reg 0x10: [mem 0xfbc00000-0xfbdfffff 64bit pref] [ 0.640403] pci 0000:04:00.0: reg 0x20: [mem 0xfbe04000-0xfbe07fff 64bit pref] [ 0.640588] pci 0000:04:00.0: reg 0x30: [mem 0xfb480000-0xfb4fffff pref] [ 0.640938] pci 0000:04:00.0: PME# supported from D0 D3hot D3cold [ 0.641159] pci 0000:04:00.0: reg 0x184: [mem 0x00000000-0x00003fff 64bit] [ 0.641273] pci 0000:04:00.0: VF(n) BAR0 space: [mem 0x00000000-0x000fffff 64bit] (contains BAR0 for 64 VFs) [ 0.641478] pci 0000:04:00.0: reg 0x190: [mem 0x00000000-0x00003fff 64bit] [ 0.641599] pci 0000:04:00.0: VF(n) BAR3 space: [mem 0x00000000-0x000fffff 64bit] (contains BAR3 for 64 VFs) [ 0.642173] pci 0000:04:00.1: [8086:15ac] type 00 class 0x020000 [ 0.642367] pci 0000:04:00.1: reg 0x10: [mem 0xfba00000-0xfbbfffff 64bit pref] [ 0.642659] pci 0000:04:00.1: reg 0x20: [mem 0xfbe00000-0xfbe03fff 64bit pref] [ 0.642844] pci 0000:04:00.1: reg 0x30: [mem 0xfb400000-0xfb47ffff pref] [ 0.643192] pci 0000:04:00.1: PME# supported from D0 D3hot D3cold [ 0.643357] pci 0000:04:00.1: reg 0x184: [mem 0x00000000-0x00003fff 64bit] [ 0.643478] pci 0000:04:00.1: VF(n) BAR0 space: [mem 0x00000000-0x000fffff 64bit] (contains BAR0 for 64 VFs) [ 0.643682] pci 0000:04:00.1: reg 0x190: [mem 0x00000000-0x00003fff 64bit] [ 0.643803] pci 0000:04:00.1: VF(n) BAR3 space: [mem 0x00000000-0x000fffff 64bit] (contains BAR3 for 64 VFs) [ 0.644396] pci 0000:00:02.2: PCI bridge to [bus 04] [ 0.644531] pci 0000:00:02.2: bridge window [mem 0xfb400000-0xfb4fffff] [ 0.644670] pci 0000:00:02.2: bridge window [mem 0xfba00000-0xfbefffff 64bit pref] [ 0.644961] pci 0000:00:03.0: PCI bridge to [bus 05] [ 0.645252] pci 0000:00:03.2: PCI bridge to [bus 06] [ 0.645521] pci 0000:07:00.0: working around ROM BAR overlap defect [ 0.645641] pci 0000:07:00.0: [8086:1533] type 00 class 0x020000 [ 0.645848] pci 0000:07:00.0: reg 0x10: [mem 0xfb300000-0xfb37ffff] [ 0.646065] pci 0000:07:00.0: reg 0x18: [io 0xe000-0xe01f] [ 0.646230] pci 0000:07:00.0: reg 0x1c: [mem 0xfb380000-0xfb383fff] [ 0.646692] pci 0000:07:00.0: PME# supported from D0 D3hot D3cold [ 0.647156] pci 0000:00:1c.0: PCI bridge to [bus 07] [ 0.647284] pci 0000:00:1c.0: bridge window [io 0xe000-0xefff] [ 0.647413] pci 0000:00:1c.0: bridge window [mem 0xfb300000-0xfb3fffff] [ 0.647767] pci 0000:08:00.0: working around ROM BAR overlap defect [ 0.647919] pci 0000:08:00.0: [8086:1533] type 00 class 0x020000 [ 0.648125] pci 0000:08:00.0: reg 0x10: [mem 0xfb200000-0xfb27ffff] [ 0.648343] pci 0000:08:00.0: reg 0x18: [io 0xd000-0xd01f] [ 0.648509] pci 0000:08:00.0: reg 0x1c: [mem 0xfb280000-0xfb283fff] [ 0.649039] pci 0000:08:00.0: PME# supported from D0 D3hot D3cold [ 0.649511] pci 0000:00:1c.1: PCI bridge to [bus 08] [ 0.649637] pci 0000:00:1c.1: bridge window [io 0xd000-0xdfff] [ 0.649765] pci 0000:00:1c.1: bridge window [mem 0xfb200000-0xfb2fffff] [ 0.650105] pci 0000:09:00.0: [1a03:1150] type 01 class 0x060400 [ 0.650497] pci 0000:09:00.0: enabling Extended Tags [ 0.650843] pci 0000:09:00.0: supports D1 D2 [ 0.650957] pci 0000:09:00.0: PME# supported from D0 D1 D2 D3hot D3cold [ 0.651316] pci 0000:00:1c.3: PCI bridge to [bus 09-0a] [ 0.651443] pci 0000:00:1c.3: bridge window [io 0xc000-0xcfff] [ 0.651572] pci 0000:00:1c.3: bridge window [mem 0xfa000000-0xfb0fffff] [ 0.651874] pci_bus 0000:0a: extended config space not accessible [ 0.652051] pci 0000:0a:00.0: [1a03:2000] type 00 class 0x030000 [ 0.652256] pci 0000:0a:00.0: reg 0x10: [mem 0xfa000000-0xfaffffff] [ 0.652321] pci 0000:0a:00.0: reg 0x14: [mem 0xfb000000-0xfb01ffff] [ 0.652489] pci 0000:0a:00.0: reg 0x18: [io 0xc000-0xc07f] [ 0.652843] pci 0000:0a:00.0: Video device with shadowed ROM at [mem 0x000c0000-0x000dffff] [ 0.653133] pci 0000:0a:00.0: supports D1 D2 [ 0.653253] pci 0000:0a:00.0: PME# supported from D0 D1 D2 D3hot D3cold [ 0.653590] pci 0000:09:00.0: PCI bridge to [bus 0a] [ 0.653728] pci 0000:09:00.0: bridge window [io 0xc000-0xcfff] [ 0.653858] pci 0000:09:00.0: bridge window [mem 0xfa000000-0xfb0fffff] [ 0.654244] pci 0000:0b:00.0: [8086:1521] type 00 class 0x020000 [ 0.654359] pci 0000:0b:00.0: reg 0x10: [mem 0xfb160000-0xfb17ffff] [ 0.654576] pci 0000:0b:00.0: reg 0x18: [io 0xb060-0xb07f] [ 0.654738] pci 0000:0b:00.0: reg 0x1c: [mem 0xfb18c000-0xfb18ffff] [ 0.655253] pci 0000:0b:00.0: PME# supported from D0 D3hot D3cold [ 0.655388] pci 0000:0b:00.0: reg 0x184: [mem 0x00000000-0x00003fff 64bit pref] [ 0.655534] pci 0000:0b:00.0: VF(n) BAR0 space: [mem 0x00000000-0x0001ffff 64bit pref] (contains BAR0 for 8 VFs) [ 0.655758] pci 0000:0b:00.0: reg 0x190: [mem 0x00000000-0x00003fff 64bit pref] [ 0.655906] pci 0000:0b:00.0: VF(n) BAR3 space: [mem 0x00000000-0x0001ffff 64bit pref] (contains BAR3 for 8 VFs) [ 0.656470] pci 0000:0b:00.1: [8086:1521] type 00 class 0x020000 [ 0.656671] pci 0000:0b:00.1: reg 0x10: [mem 0xfb140000-0xfb15ffff] [ 0.656881] pci 0000:0b:00.1: reg 0x18: [io 0xb040-0xb05f] [ 0.657047] pci 0000:0b:00.1: reg 0x1c: [mem 0xfb188000-0xfb18bfff] [ 0.657557] pci 0000:0b:00.1: PME# supported from D0 D3hot D3cold [ 0.657786] pci 0000:0b:00.1: reg 0x184: [mem 0x00000000-0x00003fff 64bit pref] [ 0.657931] pci 0000:0b:00.1: VF(n) BAR0 space: [mem 0x00000000-0x0001ffff 64bit pref] (contains BAR0 for 8 VFs) [ 0.658149] pci 0000:0b:00.1: reg 0x190: [mem 0x00000000-0x00003fff 64bit pref] [ 0.658273] pci 0000:0b:00.1: VF(n) BAR3 space: [mem 0x00000000-0x0001ffff 64bit pref] (contains BAR3 for 8 VFs) [ 0.658797] pci 0000:0b:00.2: [8086:1521] type 00 class 0x020000 [ 0.658998] pci 0000:0b:00.2: reg 0x10: [mem 0xfb120000-0xfb13ffff] [ 0.659208] pci 0000:0b:00.2: reg 0x18: [io 0xb020-0xb03f] [ 0.659319] pci 0000:0b:00.2: reg 0x1c: [mem 0xfb184000-0xfb187fff] [ 0.659830] pci 0000:0b:00.2: PME# supported from D0 D3hot D3cold [ 0.660059] pci 0000:0b:00.2: reg 0x184: [mem 0x00000000-0x00003fff 64bit pref] [ 0.660205] pci 0000:0b:00.2: VF(n) BAR0 space: [mem 0x00000000-0x0001ffff 64bit pref] (contains BAR0 for 8 VFs) [ 0.660337] pci 0000:0b:00.2: reg 0x190: [mem 0x00000000-0x00003fff 64bit pref] [ 0.660482] pci 0000:0b:00.2: VF(n) BAR3 space: [mem 0x00000000-0x0001ffff 64bit pref] (contains BAR3 for 8 VFs) [ 0.661012] pci 0000:0b:00.3: [8086:1521] type 00 class 0x020000 [ 0.661220] pci 0000:0b:00.3: reg 0x10: [mem 0xfb100000-0xfb11ffff] [ 0.661363] pci 0000:0b:00.3: reg 0x18: [io 0xb000-0xb01f] [ 0.661525] pci 0000:0b:00.3: reg 0x1c: [mem 0xfb180000-0xfb183fff] [ 0.662035] pci 0000:0b:00.3: PME# supported from D0 D3hot D3cold [ 0.662264] pci 0000:0b:00.3: reg 0x184: [mem 0x00000000-0x00003fff 64bit pref] [ 0.662413] pci 0000:0b:00.3: VF(n) BAR0 space: [mem 0x00000000-0x0001ffff 64bit pref] (contains BAR0 for 8 VFs) [ 0.662631] pci 0000:0b:00.3: reg 0x190: [mem 0x00000000-0x00003fff 64bit pref] [ 0.662776] pci 0000:0b:00.3: VF(n) BAR3 space: [mem 0x00000000-0x0001ffff 64bit pref] (contains BAR3 for 8 VFs) [ 0.663358] pci 0000:00:1c.4: PCI bridge to [bus 0b] [ 0.663485] pci 0000:00:1c.4: bridge window [io 0xb000-0xbfff] [ 0.663614] pci 0000:00:1c.4: bridge window [mem 0xfb100000-0xfb1fffff] [ 0.663760] pci 0000:00:1c.4: bridge has subordinate 0b but max busn 0c [ 0.664228] pci_bus 0000:00: on NUMA node 0 [ 0.664328] xen: registering gsi 13 triggering 1 polarity 0 [ 0.665291] ACPI: PCI: Interrupt link LNKA configured for IRQ 11 [ 0.665488] ACPI: PCI: Interrupt link LNKB configured for IRQ 10 [ 0.665686] ACPI: PCI: Interrupt link LNKC configured for IRQ 5 [ 0.665878] ACPI: PCI: Interrupt link LNKD configured for IRQ 11 [ 0.666069] ACPI: PCI: Interrupt link LNKE configured for IRQ 0 [ 0.666188] ACPI: PCI: Interrupt link LNKE disabled [ 0.666348] ACPI: PCI: Interrupt link LNKF configured for IRQ 0 [ 0.666473] ACPI: PCI: Interrupt link LNKF disabled [ 0.666659] ACPI: PCI: Interrupt link LNKG configured for IRQ 0 [ 0.666778] ACPI: PCI: Interrupt link LNKG disabled [ 0.666964] ACPI: PCI: Interrupt link LNKH configured for IRQ 0 [ 0.667083] ACPI: PCI: Interrupt link LNKH disabled [ 0.667353] xen:balloon: Initialising balloon driver [ 0.667492] iommu: Default domain type: Translated [ 0.675277] iommu: DMA domain TLB invalidation policy: lazy mode [ 0.675463] SCSI subsystem initialized [ 0.675590] libata version 3.00 loaded. [ 0.675590] ACPI: bus type USB registered [ 0.675590] usbcore: registered new interface driver usbfs [ 0.675621] usbcore: registered new interface driver hub [ 0.675750] usbcore: registered new device driver usb [ 0.676289] pps_core: LinuxPPS API ver. 1 registered [ 0.676405] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti [ 0.676556] PTP clock support registered [ 0.676694] Advanced Linux Sound Architecture Driver Initialized. [ 0.676694] NetLabel: Initializing [ 0.677274] NetLabel: domain hash size = 128 [ 0.677387] NetLabel: protocols = UNLABELED CIPSOv4 CALIPSO [ 0.677521] NetLabel: unlabeled traffic allowed by default [ 0.677660] PCI: Using ACPI for IRQ routing [ 0.712606] PCI: pci_cache_line_size set to 64 bytes [ 0.713382] e820: reserve RAM buffer [mem 0x0009a000-0x0009ffff] [ 0.713385] e820: reserve RAM buffer [mem 0x20066000-0x23ffffff] [ 0.713411] pci 0000:0a:00.0: vgaarb: setting as boot VGA device [ 0.713431] pci 0000:0a:00.0: vgaarb: bridge control possible [ 0.713560] pci 0000:0a:00.0: vgaarb: VGA device added: decodes=io+mem,owns=io+mem,locks=none [ 0.713733] vgaarb: loaded [ 0.715710] clocksource: Switched to clocksource tsc-early [ 0.715931] VFS: Disk quotas dquot_6.6.0 [ 0.716055] VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes) [ 0.716199] hugetlbfs: disabling because there are no supported hugepage sizes [ 0.716199] pnp: PnP ACPI init [ 0.716430] xen: registering gsi 8 triggering 1 polarity 0 [ 0.716625] system 00:01: [io 0x0500-0x057f] has been reserved [ 0.716752] system 00:01: [io 0x0400-0x047f] has been reserved [ 0.716871] system 00:01: [io 0x0580-0x059f] has been reserved [ 0.716920] system 00:01: [io 0x0600-0x061f] has been reserved [ 0.716920] system 00:01: [io 0x0880-0x0883] has been reserved [ 0.716920] system 00:01: [io 0x0800-0x081f] has been reserved [ 0.717373] system 00:01: [mem 0xfed1c000-0xfed3ffff] could not be reserved [ 0.717524] system 00:01: [mem 0xfed45000-0xfed8bfff] has been reserved [ 0.717645] system 00:01: [mem 0xff000000-0xffffffff] has been reserved [ 0.717766] system 00:01: [mem 0xfee00000-0xfeefffff] has been reserved [ 0.717886] system 00:01: [mem 0xfed12000-0xfed1200f] has been reserved [ 0.718007] system 00:01: [mem 0xfed12010-0xfed1201f] has been reserved [ 0.718128] system 00:01: [mem 0xfed1b000-0xfed1bfff] has been reserved [ 0.718564] system 00:02: [io 0x0a00-0x0a0f] has been reserved [ 0.718689] system 00:02: [io 0x0a10-0x0a1f] has been reserved [ 0.718808] system 00:02: [io 0x0a20-0x0a2f] has been reserved [ 0.718966] system 00:02: [io 0x0a30-0x0a3f] has been reserved [ 0.719085] system 00:02: [io 0x0a40-0x0a4f] has been reserved [ 0.719532] xen: registering gsi 4 triggering 1 polarity 0 [ 0.719537] Already setup the GSI :4 [ 0.719650] pnp 00:03: [dma 0 disabled] [ 0.719962] xen: registering gsi 3 triggering 1 polarity 0 [ 0.719974] pnp 00:04: [dma 0 disabled] [ 0.720599] pnp: PnP ACPI: found 5 devices [ 0.752092] PM-Timer failed consistency check (0xffffff) - aborting. [ 0.752310] NET: Registered PF_INET protocol family [ 0.752473] IP idents hash table entries: 8192 (order: 4, 65536 bytes, linear) [ 0.752842] tcp_listen_portaddr_hash hash table entries: 256 (order: 0, 4096 bytes, linear) [ 0.752994] Table-perturb hash table entries: 65536 (order: 6, 262144 bytes, linear) [ 0.753141] TCP established hash table entries: 4096 (order: 3, 32768 bytes, linear) [ 0.753332] TCP bind hash table entries: 4096 (order: 5, 131072 bytes, linear) [ 0.753523] TCP: Hash tables configured (established 4096 bind 4096) [ 0.753693] UDP hash table entries: 256 (order: 1, 8192 bytes, linear) [ 0.753817] UDP-Lite hash table entries: 256 (order: 1, 8192 bytes, linear) [ 0.753969] NET: Registered PF_UNIX/PF_LOCAL protocol family [ 0.754410] RPC: Registered named UNIX socket transport module. [ 0.754537] RPC: Registered udp transport module. [ 0.754650] RPC: Registered tcp transport module. [ 0.754764] RPC: Registered tcp NFSv4.1 backchannel transport module. [ 0.755307] pci 0000:00:1c.4: bridge window [mem 0x00100000-0x000fffff 64bit pref] to [bus 0b] add_size 100000 add_align 100000 [ 0.755490] clipped [mem size 0x00000000 64bit pref] to [mem size 0xfffffffffffa0000 64bit pref] for e820 entry [mem 0x0009ac00-0x000fffff] [ 0.755656] clipped [mem size 0x00020000 64bit pref] to [mem size 0xfffffffffffc0000 64bit pref] for e820 entry [mem 0x0009ac00-0x000fffff] [ 0.755818] pci 0000:00:1c.4: BAR 15: assigned [mem 0x90000000-0x900fffff 64bit pref] [ 0.755966] pci 0000:00:01.0: PCI bridge to [bus 01] [ 0.756141] pci 0000:00:01.1: PCI bridge to [bus 02] [ 0.756342] pci 0000:00:02.0: PCI bridge to [bus 03] [ 0.756485] pci 0000:00:02.0: bridge window [mem 0xfb500000-0xfb5fffff] [ 0.756650] pci 0000:04:00.0: BAR 7: no space for [mem size 0x00100000 64bit] [ 0.756774] pci 0000:04:00.0: BAR 7: failed to assign [mem size 0x00100000 64bit] [ 0.756920] pci 0000:04:00.0: BAR 10: no space for [mem size 0x00100000 64bit] [ 0.757064] pci 0000:04:00.0: BAR 10: failed to assign [mem size 0x00100000 64bit] [ 0.757210] pci 0000:04:00.1: BAR 7: no space for [mem size 0x00100000 64bit] [ 0.757359] pci 0000:04:00.1: BAR 7: failed to assign [mem size 0x00100000 64bit] [ 0.757508] pci 0000:04:00.1: BAR 10: no space for [mem size 0x00100000 64bit] [ 0.757652] pci 0000:04:00.1: BAR 10: failed to assign [mem size 0x00100000 64bit] [ 0.757831] pci 0000:04:00.0: BAR 7: no space for [mem size 0x00100000 64bit] [ 0.757954] pci 0000:04:00.0: BAR 7: failed to assign [mem size 0x00100000 64bit] [ 0.758099] pci 0000:04:00.0: BAR 10: no space for [mem size 0x00100000 64bit] [ 0.758244] pci 0000:04:00.0: BAR 10: failed to assign [mem size 0x00100000 64bit] [ 0.758410] pci 0000:04:00.1: BAR 7: no space for [mem size 0x00100000 64bit] [ 0.758535] pci 0000:04:00.1: BAR 7: failed to assign [mem size 0x00100000 64bit] [ 0.758681] pci 0000:04:00.1: BAR 10: no space for [mem size 0x00100000 64bit] [ 0.758825] pci 0000:04:00.1: BAR 10: failed to assign [mem size 0x00100000 64bit] [ 0.758971] pci 0000:00:02.2: PCI bridge to [bus 04] [ 0.759113] pci 0000:00:02.2: bridge window [mem 0xfb400000-0xfb4fffff] [ 0.759247] pci 0000:00:02.2: bridge window [mem 0xfba00000-0xfbefffff 64bit pref] [ 0.759438] pci 0000:00:03.0: PCI bridge to [bus 05] [ 0.759614] pci 0000:00:03.2: PCI bridge to [bus 06] [ 0.759788] pci 0000:00:1c.0: PCI bridge to [bus 07] [ 0.759908] pci 0000:00:1c.0: bridge window [io 0xe000-0xefff] [ 0.760048] pci 0000:00:1c.0: bridge window [mem 0xfb300000-0xfb3fffff] [ 0.760210] pci 0000:00:1c.1: PCI bridge to [bus 08] [ 0.760358] pci 0000:00:1c.1: bridge window [io 0xd000-0xdfff] [ 0.760507] pci 0000:00:1c.1: bridge window [mem 0xfb200000-0xfb2fffff] [ 0.760671] pci 0000:09:00.0: PCI bridge to [bus 0a] [ 0.760791] pci 0000:09:00.0: bridge window [io 0xc000-0xcfff] [ 0.760933] pci 0000:09:00.0: bridge window [mem 0xfa000000-0xfb0fffff] [ 0.761099] pci 0000:00:1c.3: PCI bridge to [bus 09-0a] [ 0.761219] pci 0000:00:1c.3: bridge window [io 0xc000-0xcfff] [ 0.761383] pci 0000:00:1c.3: bridge window [mem 0xfa000000-0xfb0fffff] [ 0.761564] pci 0000:0b:00.0: BAR 7: assigned [mem 0x90000000-0x9001ffff 64bit pref] [ 0.761723] pci 0000:0b:00.0: BAR 10: assigned [mem 0x90020000-0x9003ffff 64bit pref] [ 0.761884] pci 0000:0b:00.1: BAR 7: assigned [mem 0x90040000-0x9005ffff 64bit pref] [ 0.762038] pci 0000:0b:00.1: BAR 10: assigned [mem 0x90060000-0x9007ffff 64bit pref] [ 0.762191] pci 0000:0b:00.2: BAR 7: assigned [mem 0x90080000-0x9009ffff 64bit pref] [ 0.762374] pci 0000:0b:00.2: BAR 10: assigned [mem 0x900a0000-0x900bffff 64bit pref] [ 0.762530] pci 0000:0b:00.3: BAR 7: assigned [mem 0x900c0000-0x900dffff 64bit pref] [ 0.762683] pci 0000:0b:00.3: BAR 10: assigned [mem 0x900e0000-0x900fffff 64bit pref] [ 0.762838] pci 0000:00:1c.4: PCI bridge to [bus 0b] [ 0.762958] pci 0000:00:1c.4: bridge window [io 0xb000-0xbfff] [ 0.763098] pci 0000:00:1c.4: bridge window [mem 0xfb100000-0xfb1fffff] [ 0.763237] pci 0000:00:1c.4: bridge window [mem 0x90000000-0x900fffff 64bit pref] [ 0.763434] pci_bus 0000:00: Some PCI device resources are unassigned, try booting with pci=realloc [ 0.763585] pci_bus 0000:00: resource 4 [io 0x0000-0x0cf7 window] [ 0.763705] pci_bus 0000:00: resource 5 [io 0x1000-0xffff window] [ 0.763824] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff window] [ 0.763946] pci_bus 0000:00: resource 7 [mem 0x90000000-0xfbffbfff window] [ 0.764067] pci_bus 0000:03: resource 1 [mem 0xfb500000-0xfb5fffff] [ 0.764187] pci_bus 0000:04: resource 1 [mem 0xfb400000-0xfb4fffff] [ 0.764317] pci_bus 0000:04: resource 2 [mem 0xfba00000-0xfbefffff 64bit pref] [ 0.764484] pci_bus 0000:07: resource 0 [io 0xe000-0xefff] [ 0.764606] pci_bus 0000:07: resource 1 [mem 0xfb300000-0xfb3fffff] [ 0.764736] pci_bus 0000:08: resource 0 [io 0xd000-0xdfff] [ 0.764853] pci_bus 0000:08: resource 1 [mem 0xfb200000-0xfb2fffff] [ 0.764973] pci_bus 0000:09: resource 0 [io 0xc000-0xcfff] [ 0.765090] pci_bus 0000:09: resource 1 [mem 0xfa000000-0xfb0fffff] [ 0.765209] pci_bus 0000:0a: resource 0 [io 0xc000-0xcfff] [ 0.765349] pci_bus 0000:0a: resource 1 [mem 0xfa000000-0xfb0fffff] [ 0.765472] pci_bus 0000:0b: resource 0 [io 0xb000-0xbfff] [ 0.765589] pci_bus 0000:0b: resource 1 [mem 0xfb100000-0xfb1fffff] [ 0.765708] pci_bus 0000:0b: resource 2 [mem 0x90000000-0x900fffff 64bit pref] [ 0.766252] pci 0000:00:05.0: disabled boot interrupts on device [8086:6f28] [ 0.766497] xen: registering gsi 19 triggering 0 polarity 1 [ 0.766526] xen: --> pirq=19 -> irq=19 (gsi=19) [ 0.775420] xen: registering gsi 18 triggering 0 polarity 1 [ 0.775442] xen: --> pirq=18 -> irq=18 (gsi=18) [ 0.791690] pci 0000:00:1a.0: quirk_usb_early_handoff+0x0/0x720 took 15942 usecs [ 0.791936] xen: registering gsi 18 triggering 0 polarity 1 [ 0.791942] Already setup the GSI :18 [ 0.808707] pci 0000:00:1d.0: quirk_usb_early_handoff+0x0/0x720 took 16432 usecs [ 0.808956] pci 0000:04:00.0: CLS mismatch (64 != 32), using 64 bytes [ 0.809099] PCI-DMA: Using software bounce buffering for IO (SWIOTLB) [ 0.809174] Unpacking initramfs... [ 0.809219] software IO TLB: mapped [mem 0x000000001b180000-0x000000001f180000] (64MB) [ 0.809588] kvm: no hardware support for 'kvm_intel' [ 0.817475] has_svm: not amd or hygon [ 0.817591] kvm: no hardware support for 'kvm_amd' [ 0.817708] clocksource: tsc: mask: 0xffffffffffffffff max_cycles: 0x1fb63109b96, max_idle_ns: 440795265316 ns [ 0.818304] clocksource: Switched to clocksource tsc [ 0.821069] Initialise system trusted keyrings [ 0.821386] workingset: timestamp_bits=62 max_order=17 bucket_order=0 [ 0.822873] NFS: Registering the id_resolver key type [ 0.822997] Key type id_resolver registered [ 0.823109] Key type id_legacy registered [ 0.823329] 9p: Installing v9fs 9p2000 file system support [ 0.837380] Key type asymmetric registered [ 0.837507] Asymmetric key parser 'x509' registered [ 0.837652] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 251) [ 0.837809] io scheduler mq-deadline registered [ 0.837930] io scheduler kyber registered [ 0.838744] xen: registering gsi 16 triggering 0 polarity 1 [ 0.838773] xen: --> pirq=16 -> irq=16 (gsi=16) [ 0.839305] xen: registering gsi 16 triggering 0 polarity 1 [ 0.839311] Already setup the GSI :16 [ 0.839927] xen: registering gsi 16 triggering 0 polarity 1 [ 0.839932] Already setup the GSI :16 [ 0.840253] xen: registering gsi 16 triggering 0 polarity 1 [ 0.840257] Already setup the GSI :16 [ 0.840576] xen: registering gsi 16 triggering 0 polarity 1 [ 0.840580] Already setup the GSI :16 [ 0.841199] xen: registering gsi 16 triggering 0 polarity 1 [ 0.841204] Already setup the GSI :16 [ 0.841810] xen: registering gsi 16 triggering 0 polarity 1 [ 0.841814] Already setup the GSI :16 [ 0.842256] xen: registering gsi 17 triggering 0 polarity 1 [ 0.842272] xen: --> pirq=17 -> irq=17 (gsi=17) [ 0.842605] xen: registering gsi 19 triggering 0 polarity 1 [ 0.842609] Already setup the GSI :19 [ 0.843061] xen: registering gsi 16 triggering 0 polarity 1 [ 0.843066] Already setup the GSI :16 [ 0.843750] input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input0 [ 0.843926] ACPI: button: Power Button [PWRB] [ 0.844071] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input1 [ 0.844320] ACPI: button: Power Button [PWRF] [ 0.844603] Monitor-Mwait will be used to enter C-1 state [ 0.844638] Monitor-Mwait will be used to enter C-2 state [ 0.844659] ACPI: \_SB_.SCK0.CP00: Found 2 idle states [ 0.845013] ACPI: \_SB_.SCK0.CP01: Found 2 idle states [ 0.845376] ACPI: \_SB_.SCK0.CP02: Found 2 idle states [ 0.845829] ACPI: \_SB_.SCK0.CP03: Found 2 idle states [ 0.846381] ACPI: \_SB_.SCK0.CP04: Found 2 idle states [ 0.846791] ACPI: \_SB_.SCK0.CP05: Found 2 idle states [ 0.847299] ACPI: \_SB_.SCK0.CP06: Found 2 idle states [ 0.847777] ACPI: \_SB_.SCK0.CP07: Found 2 idle states [ 0.848646] xen:xen_evtchn: Event-channel device installed [ 0.848874] xen_pciback: backend is vpci [ 0.849614] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled [ 0.849951] 00:04: ttyS1 at I/O 0x2f8 (irq = 3, base_baud = 115200) is a 16550A [ 0.850675] hpet_acpi_add: no address or irqs in _CRS [ 0.850884] Non-volatile memory driver v1.3 [ 0.850998] AMD-Vi: AMD IOMMUv2 functionality not available on this system - This is not a bug. [ 0.853741] loop: module loaded [ 0.860130] ahci 0000:00:1f.2: version 3.0 [ 0.860231] xen: registering gsi 16 triggering 0 polarity 1 [ 0.860240] Already setup the GSI :16 [ 0.860566] ahci 0000:00:1f.2: AHCI 0001.0300 32 slots 6 ports 6 Gbps 0x3f impl SATA mode [ 0.860731] ahci 0000:00:1f.2: flags: 64bit ncq led clo pio ems apst [ 0.876261] scsi host0: ahci [ 0.876657] scsi host1: ahci [ 0.877031] scsi host2: ahci [ 0.877364] scsi host3: ahci [ 0.877708] scsi host4: ahci [ 0.878063] scsi host5: ahci [ 0.878241] ata1: SATA max UDMA/133 abar m2048@0xfb612000 port 0xfb612100 irq 75 [ 0.878389] ata2: SATA max UDMA/133 abar m2048@0xfb612000 port 0xfb612180 irq 75 [ 0.878534] ata3: SATA max UDMA/133 abar m2048@0xfb612000 port 0xfb612200 irq 75 [ 0.878698] ata4: SATA max UDMA/133 abar m2048@0xfb612000 port 0xfb612280 irq 75 [ 0.878844] ata5: SATA max UDMA/133 abar m2048@0xfb612000 port 0xfb612300 irq 75 [ 0.878989] ata6: SATA max UDMA/133 abar m2048@0xfb612000 port 0xfb612380 irq 75 [ 0.879461] tun: Universal TUN/TAP device driver, 1.6 [ 0.879736] e100: Intel(R) PRO/100 Network Driver [ 0.879855] e100: Copyright(c) 1999-2006 Intel Corporation [ 0.879993] sky2: driver version 1.30 [ 0.880179] xen_netfront: Initialising Xen virtual ethernet driver [ 0.880530] xen: registering gsi 18 triggering 0 polarity 1 [ 0.880540] Already setup the GSI :18 [ 0.880767] ehci-pci 0000:00:1a.0: EHCI Host Controller [ 0.880983] ehci-pci 0000:00:1a.0: new USB bus registered, assigned bus number 1 [ 0.881161] ehci-pci 0000:00:1a.0: debug port 2 [ 0.885294] ehci-pci 0000:00:1a.0: irq 18, io mem 0xfb614000 [ 0.891709] ehci-pci 0000:00:1a.0: USB 2.0 started, EHCI 1.00 [ 0.891941] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 6.01 [ 0.892098] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 0.892242] usb usb1: Product: EHCI Host Controller [ 0.892358] usb usb1: Manufacturer: Linux 6.1.95+ ehci_hcd [ 0.892475] usb usb1: SerialNumber: 0000:00:1a.0 [ 0.892767] hub 1-0:1.0: USB hub found [ 0.892892] hub 1-0:1.0: 2 ports detected [ 0.893258] xen: registering gsi 18 triggering 0 polarity 1 [ 0.893267] Already setup the GSI :18 [ 0.893466] ehci-pci 0000:00:1d.0: EHCI Host Controller [ 0.893684] ehci-pci 0000:00:1d.0: new USB bus registered, assigned bus number 2 [ 0.893860] ehci-pci 0000:00:1d.0: debug port 2 [ 0.897946] ehci-pci 0000:00:1d.0: irq 18, io mem 0xfb613000 [ 0.904708] ehci-pci 0000:00:1d.0: USB 2.0 started, EHCI 1.00 [ 0.904938] usb usb2: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 6.01 [ 0.905087] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 0.905232] usb usb2: Product: EHCI Host Controller [ 0.905348] usb usb2: Manufacturer: Linux 6.1.95+ ehci_hcd [ 0.905464] usb usb2: SerialNumber: 0000:00:1d.0 [ 0.905751] hub 2-0:1.0: USB hub found [ 0.905883] hub 2-0:1.0: 2 ports detected [ 0.906327] xen: registering gsi 19 triggering 0 polarity 1 [ 0.906338] Already setup the GSI :19 [ 0.906544] xhci_hcd 0000:00:14.0: xHCI Host Controller [ 0.906748] xhci_hcd 0000:00:14.0: new USB bus registered, assigned bus number 3 [ 0.907965] xhci_hcd 0000:00:14.0: hcc params 0x200077c1 hci version 0x100 quirks 0x0000000000009810 [ 0.908443] xhci_hcd 0000:00:14.0: xHCI Host Controller [ 0.908642] xhci_hcd 0000:00:14.0: new USB bus registered, assigned bus number 4 [ 0.908799] xhci_hcd 0000:00:14.0: Host supports USB 3.0 SuperSpeed [ 0.909005] usb usb3: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 6.01 [ 0.909154] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 0.909299] usb usb3: Product: xHCI Host Controller [ 0.909414] usb usb3: Manufacturer: Linux 6.1.95+ xhci-hcd [ 0.909530] usb usb3: SerialNumber: 0000:00:14.0 [ 0.909820] hub 3-0:1.0: USB hub found [ 0.909953] hub 3-0:1.0: 8 ports detected [ 0.911119] usb usb4: New USB device found, idVendor=1d6b, idProduct=0003, bcdDevice= 6.01 [ 0.911273] usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 0.911423] usb usb4: Product: xHCI Host Controller [ 0.911538] usb usb4: Manufacturer: Linux 6.1.95+ xhci-hcd [ 0.911669] usb usb4: SerialNumber: 0000:00:14.0 [ 0.911922] hub 4-0:1.0: USB hub found [ 0.912053] hub 4-0:1.0: 6 ports detected [ 0.913235] usbcore: registered new interface driver usblp [ 0.913379] usbcore: registered new interface driver usb-storage [ 0.913531] i8042: PNP: No PS/2 controller found. [ 0.913881] rtc_cmos 00:00: RTC can wake from S4 [ 0.914598] rtc_cmos 00:00: registered as rtc0 [ 0.914837] rtc_cmos 00:00: alarms up to one month, y3k, 114 bytes nvram [ 0.915076] device-mapper: uevent: version 1.0.3 [ 0.915277] Freeing initrd memory: 19884K [ 0.915327] device-mapper: ioctl: 4.47.0-ioctl (2022-07-28) initialised: dm-devel@redhat.com [ 0.915371] xen: registering gsi 18 triggering 0 polarity 1 [ 0.915382] Already setup the GSI :18 [ 0.915415] i801_smbus 0000:00:1f.3: SPD Write Disable is set [ 0.915562] intel_pstate: CPU model not supported [ 0.915594] i801_smbus 0000:00:1f.3: SMBus using PCI interrupt [ 0.915714] hid: raw HID events driver (C) Jiri Kosina [ 0.916227] i2c i2c-0: 1/4 memory slots populated (from DMI) [ 0.916287] usbcore: registered new interface driver usbhid [ 0.916464] usbhid: USB HID core driver [ 0.917022] Initializing XFRM netlink socket [ 0.917257] NET: Registered PF_INET6 protocol family [ 0.917798] Segment Routing with IPv6 [ 0.917919] In-situ OAM (IOAM) with IPv6 [ 0.918061] sit: IPv6, IPv4 and MPLS over IPv4 tunneling driver [ 0.918295] NET: Registered PF_PACKET protocol family [ 0.918470] 9pnet: Installing 9P2000 support [ 0.918596] Key type dns_resolver registered [ 0.919319] IPI shorthand broadcast: enabled [ 0.919457] sched_clock: Marking stable (881643109, 37636194)->(1768504827, -849225524) [ 0.920037] registered taskstats version 1 [ 0.920154] Loading compiled-in X.509 certificates [ 0.922697] PM: Magic number: 12:720:671 [ 0.922824] workqueue scsi_tmf_1: hash matches [ 0.923044] printk: console [netcon0] enabled [ 0.923159] netconsole: network logging started [ 0.923497] cfg80211: Loading compiled-in X.509 certificates for regulatory database [ 0.935211] cfg80211: Loaded X.509 cert 'sforshee: 00b28ddf47aef9cea7' [ 0.935552] cfg80211: Loaded X.509 cert 'wens: 61c038651aabdcf94bd0ac7ff06c7248db18c600' [ 0.936229] cfg80211: loaded regulatory.db is malformed or signature is missing/invalid [ 0.936433] ALSA device list: [ 0.936578] No soundcards found. [ 1.135709] usb 1-1: new high-speed USB device number 2 using ehci-pci [ 1.143706] usb 2-1: new high-speed USB device number 2 using ehci-pci [ 1.151712] usb 3-3: new high-speed USB device number 2 using xhci_hcd [ 1.188838] ata2: SATA link down (SStatus 0 SControl 300) [ 1.188998] ata3: SATA link up 6.0 Gbps (SStatus 133 SControl 300) [ 1.189139] ata5: SATA link down (SStatus 0 SControl 300) [ 1.189295] ata6: SATA link down (SStatus 0 SControl 300) [ 1.189450] ata4: SATA link down (SStatus 0 SControl 300) [ 1.189591] ata1: SATA link down (SStatus 0 SControl 300) [ 1.190142] ata3.00: ATA-10: HGST HUS722T1TALA604, RAGNWA05, max UDMA/133 [ 1.264257] usb 1-1: New USB device found, idVendor=8087, idProduct=8008, bcdDevice= 0.05 [ 1.264412] usb 1-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0 [ 1.264814] hub 1-1:1.0: USB hub found [ 1.265104] hub 1-1:1.0: 4 ports detected [ 1.272283] usb 2-1: New USB device found, idVendor=8087, idProduct=8000, bcdDevice= 0.05 [ 1.272489] usb 2-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0 [ 1.272888] hub 2-1:1.0: USB hub found [ 1.273107] hub 2-1:1.0: 4 ports detected [ 1.276452] ata3.00: 1953525168 sectors, multi 16: LBA48 NCQ (depth 32), AA [ 1.276739] ata3.00: Features: NCQ-sndrcv NCQ-prio [ 1.279570] usb 3-3: New USB device found, idVendor=05e3, idProduct=0610, bcdDevice=32.98 [ 1.279736] usb 3-3: New USB device strings: Mfr=0, Product=1, SerialNumber=0 [ 1.279860] usb 3-3: Product: USB2.0 Hub [ 1.280657] hub 3-3:1.0: USB hub found [ 1.281126] hub 3-3:1.0: 4 ports detected [ 1.304186] ata3.00: configured for UDMA/133 [ 1.304469] scsi 2:0:0:0: Direct-Access ATA HGST HUS722T1TAL WA05 PQ: 0 ANSI: 5 [ 1.305146] sd 2:0:0:0: Attached scsi generic sg0 type 0 [ 1.305227] sd 2:0:0:0: [sda] 1953525168 512-byte logical blocks: (1.00 TB/932 GiB) [ 1.305476] sd 2:0:0:0: [sda] Write Protect is off [ 1.305598] sd 2:0:0:0: [sda] Mode Sense: 00 3a 00 00 [ 1.305663] sd 2:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 1.305896] sd 2:0:0:0: [sda] Preferred minimum I/O size 512 bytes [ 1.325470] sda: sda1 sda2 < sda5 > [ 1.325982] sd 2:0:0:0: [sda] Attached SCSI disk [ 1.327216] Freeing unused kernel image (initmem) memory: 1576K [ 1.327345] Write protecting the kernel read-only data: 22528k [ 1.345291] Freeing unused kernel image (text/rodata gap) memory: 2032K [ 1.346604] Freeing unused kernel image (rodata/data gap) memory: 1568K [ 1.397684] usb 3-4: new high-speed USB device number 3 using xhci_hcd [ 1.523964] usb 3-4: New USB device found, idVendor=0557, idProduct=7000, bcdDevice= 0.00 [ 1.524119] usb 3-4: New USB device strings: Mfr=0, Product=0, SerialNumber=0 [ 1.524829] hub 3-4:1.0: USB hub found [ 1.525040] hub 3-4:1.0: 4 ports detected [ 1.587683] usb 3-3.2: new high-speed USB device number 4 using xhci_hcd [ 1.665116] usb 3-3.2: New USB device found, idVendor=05e3, idProduct=0610, bcdDevice=32.98 [ 1.665271] usb 3-3.2: New USB device strings: Mfr=0, Product=1, SerialNumber=0 [ 1.665417] usb 3-3.2: Product: USB2.0 Hub [ 1.666168] hub 3-3.2:1.0: USB hub found [ 1.666628] hub 3-3.2:1.0: 4 ports detected [ 1.808852] x86/mm: Checked W+X mappings: passed, no W+X pages found. [ 1.808980] Run /init as init process [ 1.809091] with arguments: [ 1.809092] /init [ 1.809093] placeholder [ 1.809094] with environment: [ 1.809095] HOME=/ [ 1.809096] TERM=linux [ 1.817698] usb 3-4.1: new low-speed USB device number 5 using xhci_hcd [ 1.922081] usb 3-4.1: New USB device found, idVendor=0557, idProduct=2419, bcdDevice= 1.00 [ 1.922251] usb 3-4.1: New USB device strings: Mfr=0, Product=0, SerialNumber=0 [ 1.928081] input: HID 0557:2419 as /devices/pci0000:00/0000:00:14.0/usb3/3-4/3-4.1/3-4.1:1.0/0003:0557:2419.0001/input/input2 [ 1.981022] hid-generic 0003:0557:2419.0001: input,hidraw0: USB HID v1.00 Keyboard [HID 0557:2419] on usb-0000:00:14.0-4.1/input0 [ 1.983962] input: HID 0557:2419 as /devices/pci0000:00/0000:00:14.0/usb3/3-4/3-4.1/3-4.1:1.1/0003:0557:2419.0002/input/input3 [ 1.984316] hid-generic 0003:0557:2419.0002: input,hidraw1: USB HID v1.00 Mouse [HID 0557:2419] on usb-0000:00:14.0-4.1/input1 [ 2.247261] ixgbe: Intel(R) 10 Gigabit PCI Express Network Driver [ 2.247428] ixgbe: Copyright (c) 1999-2016 Intel Corporation. [ 2.248286] ACPI Warning: \_SB.PCI0.BR2C._PRT: Return Package has no elements (empty) (20220331/nsprepkg-94) [ 2.248554] xen: registering gsi 16 triggering 0 polarity 1 [ 2.248563] Already setup the GSI :16 [ 2.251948] igb: Intel(R) Gigabit Ethernet Network Driver [ 2.252072] igb: Copyright (c) 2007-2014 Intel Corporation. [ 2.252276] xen: registering gsi 16 triggering 0 polarity 1 [ 2.252284] Already setup the GSI :16 [ 2.278782] pps pps0: new PPS source ptp0 [ 2.279000] igb 0000:07:00.0: added PHC on eth0 [ 2.279135] igb 0000:07:00.0: Intel(R) Gigabit Ethernet Network Connection [ 2.279257] igb 0000:07:00.0: eth0: (PCIe:2.5Gb/s:Width x1) 0c:c4:7a:9f:87:be [ 2.279423] igb 0000:07:00.0: eth0: PBA No: 010C00-000 [ 2.279539] igb 0000:07:00.0: Using MSI-X interrupts. 4 rx queue(s), 4 tx queue(s) [ 2.279802] xen: registering gsi 17 triggering 0 polarity 1 [ 2.279811] Already setup the GSI :17 [ 2.309524] pps pps1: new PPS source ptp1 [ 2.309747] igb 0000:08:00.0: added PHC on eth1 [ 2.309881] igb 0000:08:00.0: Intel(R) Gigabit Ethernet Network Connection [ 2.310003] igb 0000:08:00.0: eth1: (PCIe:2.5Gb/s:Width x1) 0c:c4:7a:9f:87:bf [ 2.310169] igb 0000:08:00.0: eth1: PBA No: 010000-000 [ 2.310285] igb 0000:08:00.0: Using MSI-X interrupts. 4 rx queue(s), 4 tx queue(s) [ 2.310518] xen: registering gsi 16 triggering 0 polarity 1 [ 2.310526] Already setup the GSI :16 [ 2.368932] igb 0000:0b:00.0: added PHC on eth2 [ 2.369072] igb 0000:0b:00.0: Intel(R) Gigabit Ethernet Network Connection [ 2.369194] igb 0000:0b:00.0: eth2: (PCIe:5.0Gb/s:Width x4) 0c:c4:7a:9f:87:c0 [ 2.369398] igb 0000:0b:00.0: eth2: PBA No: 010000-000 [ 2.369514] igb 0000:0b:00.0: Using MSI-X interrupts. 8 rx queue(s), 8 tx queue(s) [ 2.369760] xen: registering gsi 17 triggering 0 polarity 1 [ 2.369769] Already setup the GSI :17 [ 2.428081] igb 0000:0b:00.1: added PHC on eth3 [ 2.428220] igb 0000:0b:00.1: Intel(R) Gigabit Ethernet Network Connection [ 2.428343] igb 0000:0b:00.1: eth3: (PCIe:5.0Gb/s:Width x4) 0c:c4:7a:9f:87:c1 [ 2.428579] igb 0000:0b:00.1: eth3: PBA No: 010000-000 [ 2.428708] igb 0000:0b:00.1: Using MSI-X interrupts. 8 rx queue(s), 8 tx queue(s) [ 2.428934] xen: registering gsi 18 triggering 0 polarity 1 [ 2.428941] Already setup the GSI :18 [ 2.485258] igb 0000:0b:00.2: added PHC on eth4 [ 2.485404] igb 0000:0b:00.2: Intel(R) Gigabit Ethernet Network Connection [ 2.485526] igb 0000:0b:00.2: eth4: (PCIe:5.0Gb/s:Width x4) 0c:c4:7a:9f:87:c2 [ 2.485743] igb 0000:0b:00.2: eth4: PBA No: 010000-000 [ 2.485859] igb 0000:0b:00.2: Using MSI-X interrupts. 8 rx queue(s), 8 tx queue(s) [ 2.486102] xen: registering gsi 19 triggering 0 polarity 1 [ 2.486111] Already setup the GSI :19 [ 2.542176] igb 0000:0b:00.3: added PHC on eth5 [ 2.542318] igb 0000:0b:00.3: Intel(R) Gigabit Ethernet Network Connection [ 2.542440] igb 0000:0b:00.3: eth5: (PCIe:5.0Gb/s:Width x4) 0c:c4:7a:9f:87:c3 [ 2.542651] igb 0000:0b:00.3: eth5: PBA No: 010000-000 [ 2.542769] igb 0000:0b:00.3: Using MSI-X interrupts. 8 rx queue(s), 8 tx queue(s) [ 2.545171] igb 0000:07:00.0 enx0cc47a9f87be: renamed from eth0 [ 2.559238] igb 0000:08:00.0 enx0cc47a9f87bf: renamed from eth1 [ 2.571845] igb 0000:0b:00.0 enx0cc47a9f87c0: renamed from eth2 [ 2.582871] igb 0000:0b:00.1 enx0cc47a9f87c1: renamed from eth3 [ 2.596196] igb 0000:0b:00.2 enx0cc47a9f87c2: renamed from eth4 [ 2.605155] igb 0000:0b:00.3 enx0cc47a9f87c3: renamed from eth5 [ 2.981888] ixgbe 0000:04:00.0: Multiqueue Enabled: Rx Queue count = 8, Tx Queue count = 8 XDP Queue count = 0 [ 3.110622] ixgbe 0000:04:00.0: MAC: 5, PHY: 0, PBA No: 020B00-000 [ 3.110895] ixgbe 0000:04:00.0: 0c:c4:7a:9f:8f:b6 [ 3.403319] ixgbe 0000:04:00.0: Intel(R) 10 Gigabit Network Connection [ 3.403730] ACPI Warning: \_SB.PCI0.BR2C._PRT: Return Package has no elements (empty) (20220331/nsprepkg-94) [ 3.403951] xen: registering gsi 17 triggering 0 polarity 1 [ 3.403961] Already setup the GSI :17 [ 4.144274] ixgbe 0000:04:00.1: Multiqueue Enabled: Rx Queue count = 8, Tx Queue count = 8 XDP Queue count = 0 [ 4.274064] ixgbe 0000:04:00.1: MAC: 5, PHY: 0, PBA No: 020B00-000 [ 4.274308] ixgbe 0000:04:00.1: 0c:c4:7a:9f:8f:b7 [ 4.563580] ixgbe 0000:04:00.1: Intel(R) 10 Gigabit Network Connection [ 4.566051] ixgbe 0000:04:00.0 enx0cc47a9f8fb6: renamed from eth0 [ 4.575172] ixgbe 0000:04:00.1 enx0cc47a9f8fb7: renamed from eth1 [ 4.985780] EXT4-fs (dm-0): mounting ext3 file system using the ext4 subsystem [ 4.993026] EXT4-fs (dm-0): mounted filesystem with ordered data mode. Quota mode: none. [ 8.475668] EXT4-fs (dm-0): re-mounted. Quota mode: none. [ 9.601804] EXT4-fs (sda1): mounting ext3 file system using the ext4 subsystem [ 9.620881] EXT4-fs (sda1): mounted filesystem with ordered data mode. Quota mode: none. [ 9.707315] Adding 1949692k swap on /dev/mapper/debina0--vg-swap_1. Priority:-2 extents:1 across:1949692k [ 11.262145] xenbr0: port 1(enx0cc47a9f87be) entered blocking state [ 11.262313] xenbr0: port 1(enx0cc47a9f87be) entered disabled state [ 11.262489] device enx0cc47a9f87be entered promiscuous mode [ 14.807208] igb 0000:07:00.0 enx0cc47a9f87be: igb: enx0cc47a9f87be NIC Link is Up 1000 Mbps Full Duplex, Flow Control: RX [ 14.909923] IPv6: ADDRCONF(NETDEV_CHANGE): enx0cc47a9f87be: link becomes ready [ 14.910186] xenbr0: port 1(enx0cc47a9f87be) entered blocking state [ 14.910310] xenbr0: port 1(enx0cc47a9f87be) entered forwarding state [ 14.910583] IPv6: ADDRCONF(NETDEV_CHANGE): xenbr0: link becomes ready