[ 0.000000] Linux version 6.1.95+ (osstest@himrod1) (gcc (Debian 12.2.0-14) 12.2.0, GNU ld (GNU Binutils for Debian) 2.40) #1 SMP PREEMPT_DYNAMIC Wed Jun 26 06:11:45 UTC 2024 [ 0.000000] Command line: placeholder root=/dev/mapper/fiano1--vg-root ro console=hvc0 [ 0.000000] Released 0 page(s) [ 0.000000] BIOS-provided physical RAM map: [ 0.000000] Xen: [mem 0x0000000000000000-0x0000000000099fff] usable [ 0.000000] Xen: [mem 0x000000000009ac00-0x00000000000fffff] reserved [ 0.000000] Xen: [mem 0x0000000000100000-0x0000000020065fff] usable [ 0.000000] Xen: [mem 0x000000007de2c000-0x000000007debafff] reserved [ 0.000000] Xen: [mem 0x000000007debb000-0x000000007dfc3fff] ACPI data [ 0.000000] Xen: [mem 0x000000007dfc4000-0x000000007e1e0fff] ACPI NVS [ 0.000000] Xen: [mem 0x000000007e1e1000-0x000000007f36afff] reserved [ 0.000000] Xen: [mem 0x000000007f36b000-0x000000007f7fffff] ACPI NVS [ 0.000000] Xen: [mem 0x0000000080000000-0x000000008fffffff] reserved [ 0.000000] Xen: [mem 0x00000000fbffc000-0x00000000fbffcfff] reserved [ 0.000000] Xen: [mem 0x00000000fec00000-0x00000000fec01fff] reserved [ 0.000000] Xen: [mem 0x00000000fed1c000-0x00000000fed3ffff] reserved [ 0.000000] Xen: [mem 0x00000000fee00000-0x00000000feefffff] reserved [ 0.000000] Xen: [mem 0x00000000ff000000-0x00000000ffffffff] reserved [ 0.000000] NX (Execute Disable) protection: active [ 0.000000] SMBIOS 2.7 present. [ 0.000000] DMI: Supermicro X9DBL-3F/X9DBL-iF/X9DBL-3F/X9DBL-iF, BIOS 3.00 12/06/2013 [ 0.000000] Hypervisor detected: Xen PV [ 0.000496] tsc: Detected 1799.999 MHz processor [ 0.001228] e820: update [mem 0x00000000-0x00000fff] usable ==> reserved [ 0.001237] e820: remove [mem 0x000a0000-0x000fffff] usable [ 0.001250] last_pfn = 0x20066 max_arch_pfn = 0x400000000 [ 0.001253] Disabled [ 0.001254] x86/PAT: MTRRs disabled, skipping PAT initialization too. [ 0.001266] x86/PAT: Configuration [0-7]: WB WT UC- UC WC WP UC UC [ 0.001361] Kernel/User page tables isolation: disabled on XEN PV. [ 0.039039] RAMDISK: [mem 0x04000000-0x0536afff] [ 0.039065] ACPI: Early table checksum verification disabled [ 0.045636] ACPI: RSDP 0x00000000000F04A0 000024 (v02 SUPERM) [ 0.045665] ACPI: XSDT 0x000000007DEF1088 00008C (v01 SUPERM SMCI--MB 00000001 AMI 00010013) [ 0.045722] ACPI: FACP 0x000000007DEFBAB0 0000F4 (v04 SUPERM SMCI--MB 00000001 AMI 00010013) [ 0.045792] ACPI: DSDT 0x000000007DEF11A0 00A910 (v02 SUPERM SMCI--MB 00000000 INTL 20091112) [ 0.045818] ACPI: FACS 0x000000007E1D8080 000040 [ 0.045844] ACPI: APIC 0x000000007DEFBBA8 000090 (v03 00000001 AMI 00010013) [ 0.045872] ACPI: FPDT 0x000000007DEFBC38 000044 (v01 00000001 AMI 00010013) [ 0.045898] ACPI: HPET 0x000000007DEFBC80 000038 (v01 SUPERM SMCI--MB 00000001 AMI. 00000005) [ 0.045925] ACPI: PRAD 0x000000007DEFBCB8 0000BE (v02 PRADID PRADTID 00000001 MSFT 04000000) [ 0.045952] ACPI: SPMI 0x000000007DEFBD78 000040 (v05 A M I OEMSPMI 00000000 AMI. 00000000) [ 0.045978] ACPI: SSDT 0x000000007DEFBDB8 0C7AE8 (v02 INTEL CpuPm 00004000 INTL 20091112) [ 0.046006] ACPI: EINJ 0x000000007DFC38A0 000130 (v01 AMI AMI EINJ 00000000 00000000) [ 0.046032] ACPI: ERST 0x000000007DFC39D0 000230 (v01 AMIER AMI ERST 00000000 00000000) [ 0.046059] ACPI: HEST 0x000000007DFC3C00 0000A8 (v01 AMI AMI HEST 00000000 00000000) [ 0.046085] ACPI: BERT 0x000000007DFC3CA8 000030 (v01 AMI AMI BERT 00000000 00000000) [ 0.046112] ACPI: RMAD 0x000000007DFC3CD8 0000B4 (v01 A M I OEMDMAR 00000001 INTL 00000001) [ 0.046139] ACPI: MCFG 0x000000007DFC3D90 00003C (v01 SUPERM SMCI--MB 00000001 MSFT 00000097) [ 0.046153] ACPI: Reserving FACP table memory at [mem 0x7defbab0-0x7defbba3] [ 0.046158] ACPI: Reserving DSDT table memory at [mem 0x7def11a0-0x7defbaaf] [ 0.046159] ACPI: Reserving FACS table memory at [mem 0x7e1d8080-0x7e1d80bf] [ 0.046160] ACPI: Reserving APIC table memory at [mem 0x7defbba8-0x7defbc37] [ 0.046162] ACPI: Reserving FPDT table memory at [mem 0x7defbc38-0x7defbc7b] [ 0.046163] ACPI: Reserving HPET table memory at [mem 0x7defbc80-0x7defbcb7] [ 0.046164] ACPI: Reserving PRAD table memory at [mem 0x7defbcb8-0x7defbd75] [ 0.046166] ACPI: Reserving SPMI table memory at [mem 0x7defbd78-0x7defbdb7] [ 0.046167] ACPI: Reserving SSDT table memory at [mem 0x7defbdb8-0x7dfc389f] [ 0.046168] ACPI: Reserving EINJ table memory at [mem 0x7dfc38a0-0x7dfc39cf] [ 0.046169] ACPI: Reserving ERST table memory at [mem 0x7dfc39d0-0x7dfc3bff] [ 0.046171] ACPI: Reserving HEST table memory at [mem 0x7dfc3c00-0x7dfc3ca7] [ 0.046172] ACPI: Reserving BERT table memory at [mem 0x7dfc3ca8-0x7dfc3cd7] [ 0.046173] ACPI: Reserving RMAD table memory at [mem 0x7dfc3cd8-0x7dfc3d8b] [ 0.046175] ACPI: Reserving MCFG table memory at [mem 0x7dfc3d90-0x7dfc3dcb] [ 0.046278] Setting APIC routing to Xen PV. [ 0.054217] Zone ranges: [ 0.054231] DMA [mem 0x0000000000001000-0x0000000000ffffff] [ 0.054239] DMA32 [mem 0x0000000001000000-0x0000000020065fff] [ 0.054242] Normal empty [ 0.054243] Movable zone start for each node [ 0.054244] Early memory node ranges [ 0.054245] node 0: [mem 0x0000000000001000-0x0000000000099fff] [ 0.054248] node 0: [mem 0x0000000000100000-0x0000000020065fff] [ 0.054251] Initmem setup node 0 [mem 0x0000000000001000-0x0000000020065fff] [ 0.054265] On node 0, zone DMA: 1 pages in unavailable ranges [ 0.054381] On node 0, zone DMA: 102 pages in unavailable ranges [ 0.058656] On node 0, zone DMA32: 32666 pages in unavailable ranges [ 0.058674] p2m virtual area at (____ptrval____), size is 40000000 [ 0.374649] Remapped 102 page(s) [ 0.377362] ACPI: PM-Timer IO Port: 0x408 [ 0.377462] ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1]) [ 0.377468] ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1]) [ 0.377471] ACPI: LAPIC_NMI (acpi_id[0x02] high edge lint[0x1]) [ 0.377473] ACPI: LAPIC_NMI (acpi_id[0x03] high edge lint[0x1]) [ 0.377523] IOAPIC[0]: apic_id 0, version 32, address 0xfec00000, GSI 0-23 [ 0.377545] IOAPIC[1]: apic_id 2, version 32, address 0xfec01000, GSI 24-47 [ 0.377565] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl) [ 0.377570] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level) [ 0.377612] ACPI: Using ACPI (MADT) for SMP configuration information [ 0.377621] ACPI: HPET id: 0x8086a701 base: 0xfed00000 [ 0.377742] smpboot: Allowing 4 CPUs, 0 hotplug CPUs [ 0.377771] PM: hibernation: Registered nosave memory: [mem 0x00000000-0x00000fff] [ 0.377775] PM: hibernation: Registered nosave memory: [mem 0x0009a000-0x0009afff] [ 0.377777] PM: hibernation: Registered nosave memory: [mem 0x0009b000-0x000fffff] [ 0.377780] [mem 0x90000000-0xfbffbfff] available for PCI devices [ 0.377789] Booting kernel on Xen [ 0.377791] Xen version: 4.19-unstable (preserve-AD) [ 0.377799] clocksource: refined-jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 1910969940391419 ns [ 0.386036] setup_percpu: NR_CPUS:64 nr_cpumask_bits:4 nr_cpu_ids:4 nr_node_ids:1 [ 0.386643] percpu: Embedded 54 pages/cpu s180520 r8192 d32472 u524288 [ 0.386653] pcpu-alloc: s180520 r8192 d32472 u524288 alloc=1*2097152 [ 0.386658] pcpu-alloc: [0] 0 1 2 3 [ 0.386815] xen: PV spinlocks enabled [ 0.386820] PV qspinlock hash table entries: 256 (order: 0, 4096 bytes, linear) [ 0.386830] Built 1 zonelists, mobility grouping on. Total pages: 129006 [ 0.386835] Kernel command line: placeholder root=/dev/mapper/fiano1--vg-root ro console=hvc0 [ 0.386912] Unknown kernel command line parameters "placeholder", will be passed to user space. [ 0.386934] random: crng init done [ 0.387055] Dentry cache hash table entries: 65536 (order: 7, 524288 bytes, linear) [ 0.387116] Inode-cache hash table entries: 32768 (order: 6, 262144 bytes, linear) [ 0.388337] mem auto-init: stack:all(zero), heap alloc:off, heap free:off [ 0.388351] software IO TLB: area num 4. [ 0.505346] Memory: 390896K/524284K available (14349K kernel code, 2682K rwdata, 4576K rodata, 1576K init, 1296K bss, 133136K reserved, 0K cma-reserved) [ 0.505678] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1 [ 0.509259] Dynamic Preempt: voluntary [ 0.509404] rcu: Preemptible hierarchical RCU implementation. [ 0.509406] rcu: RCU event tracing is enabled. [ 0.509407] rcu: RCU restricting CPUs from NR_CPUS=64 to nr_cpu_ids=4. [ 0.509409] Trampoline variant of Tasks RCU enabled. [ 0.509410] rcu: RCU calculated value of scheduler-enlistment delay is 100 jiffies. [ 0.509412] rcu: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=4 [ 0.527593] NR_IRQS: 4352, nr_irqs: 864, preallocated irqs: 16 [ 0.527795] xen:events: Using FIFO-based ABI [ 0.527834] xen: --> pirq=1 -> irq=1 (gsi=1) [ 0.527850] xen: --> pirq=2 -> irq=2 (gsi=2) [ 0.527868] xen: --> pirq=3 -> irq=3 (gsi=3) [ 0.527882] xen: --> pirq=4 -> irq=4 (gsi=4) [ 0.527896] xen: --> pirq=5 -> irq=5 (gsi=5) [ 0.527910] xen: --> pirq=6 -> irq=6 (gsi=6) [ 0.527924] xen: --> pirq=7 -> irq=7 (gsi=7) [ 0.527938] xen: --> pirq=8 -> irq=8 (gsi=8) [ 0.527952] xen: --> pirq=9 -> irq=9 (gsi=9) [ 0.527965] xen: --> pirq=10 -> irq=10 (gsi=10) [ 0.527980] xen: --> pirq=11 -> irq=11 (gsi=11) [ 0.527994] xen: --> pirq=12 -> irq=12 (gsi=12) [ 0.528008] xen: --> pirq=13 -> irq=13 (gsi=13) [ 0.528022] xen: --> pirq=14 -> irq=14 (gsi=14) [ 0.528036] xen: --> pirq=15 -> irq=15 (gsi=15) [ 0.528053] rcu: srcu_init: Setting srcu_struct sizes based on contention. [ 0.532947] Console: colour VGA+ 80x25 [ 0.547987] printk: console [tty0] enabled [ 0.549792] printk: console [hvc0] enabled [ 0.549934] ACPI: Core revision 20220331 [ 0.632999] clocksource: xen: mask: 0xffffffffffffffff max_cycles: 0x1cd42e4dffb, max_idle_ns: 881590591483 ns [ 0.633181] Xen: using vcpuop timer interface [ 0.633189] installing Xen timer for CPU 0 [ 0.633375] clocksource: tsc-early: mask: 0xffffffffffffffff max_cycles: 0x19f228ab7a2, max_idle_ns: 440795289252 ns [ 0.633556] Calibrating delay loop (skipped), value calculated using timer frequency.. 3599.99 BogoMIPS (lpj=1799999) [ 0.633998] Last level iTLB entries: 4KB 512, 2MB 8, 4MB 8 [ 0.634136] Last level dTLB entries: 4KB 512, 2MB 0, 4MB 0, 1GB 4 [ 0.634295] Spectre V1 : Mitigation: usercopy/swapgs barriers and __user pointer sanitization [ 0.634567] Spectre V2 : Mitigation: Retpolines [ 0.634702] Spectre V2 : Spectre v2 / SpectreRSB mitigation: Filling RSB on context switch [ 0.634865] Spectre V2 : Spectre v2 / SpectreRSB : Filling RSB on VMEXIT [ 0.635005] Spectre V2 : Enabling Restricted Speculation for firmware calls [ 0.635147] Spectre V2 : mitigation: Enabling conditional Indirect Branch Prediction Barrier [ 0.635314] Spectre V2 : User space: Mitigation: STIBP via prctl [ 0.635453] Speculative Store Bypass: Mitigation: Speculative Store Bypass disabled via prctl [ 0.635564] MDS: Mitigation: Clear CPU buffers [ 0.635710] MMIO Stale Data: Unknown: No mitigations [ 0.635877] x86/fpu: Supporting XSAVE feature 0x001: 'x87 floating point registers' [ 0.636042] x86/fpu: Supporting XSAVE feature 0x002: 'SSE registers' [ 0.636182] x86/fpu: Supporting XSAVE feature 0x004: 'AVX registers' [ 0.636322] x86/fpu: xstate_offset[2]: 576, xstate_sizes[2]: 256 [ 0.636462] x86/fpu: Enabled xstate features 0x7, context size is 832 bytes, using 'standard' format. [ 0.659974] Freeing SMP alternatives memory: 40K [ 0.660121] pid_max: default: 32768 minimum: 301 [ 0.660279] LSM: Security Framework initializing [ 0.660424] SELinux: Initializing. [ 0.660596] Mount-cache hash table entries: 1024 (order: 1, 8192 bytes, linear) [ 0.660765] Mountpoint-cache hash table entries: 1024 (order: 1, 8192 bytes, linear) [ 0.661545] cpu 0 spinlock event irq 49 [ 0.661691] VPMU disabled by hypervisor. [ 0.662457] cblist_init_generic: Setting adjustable number of callback queues. [ 0.662562] cblist_init_generic: Setting shift to 2 and lim to 1. [ 0.662781] Performance Events: unsupported p6 CPU model 62 no PMU driver, software events only. [ 0.662960] signal: max sigframe size: 1776 [ 0.663189] rcu: Hierarchical SRCU implementation. [ 0.663326] rcu: Max phase no-delay instances is 400. [ 0.664001] smp: Bringing up secondary CPUs ... [ 0.664540] installing Xen timer for CPU 1 [ 0.665153] cpu 1 spinlock event irq 59 [ 0.666605] MDS CPU bug present and SMT on, data leak possible. See https://www.kernel.org/doc/html/latest/admin-guide/hw-vuln/mds.html for more details. [ 0.667219] installing Xen timer for CPU 2 [ 0.667891] cpu 2 spinlock event irq 65 [ 0.668571] installing Xen timer for CPU 3 [ 0.669288] cpu 3 spinlock event irq 71 [ 0.669667] smp: Brought up 1 node, 4 CPUs [ 0.669805] smpboot: Max logical packages: 1 [ 0.670062] devtmpfs: initialized [ 0.670062] x86/mm: Memory block size: 128MB [ 0.670947] ACPI: PM: Registering ACPI NVS region [mem 0x7dfc4000-0x7e1e0fff] (2215936 bytes) [ 0.670947] ACPI: PM: Registering ACPI NVS region [mem 0x7f36b000-0x7f7fffff] (4804608 bytes) [ 0.671671] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 1911260446275000 ns [ 0.671851] futex hash table entries: 1024 (order: 4, 65536 bytes, linear) [ 0.672163] PM: RTC time: 06:44:01, date: 2024-06-26 [ 0.672438] NET: Registered PF_NETLINK/PF_ROUTE protocol family [ 0.672602] xen:grant_table: Grant tables using version 1 layout [ 0.672773] Grant table initialized [ 0.673077] audit: initializing netlink subsys (disabled) [ 0.673245] audit: type=2000 audit(1719384241.990:1): state=initialized audit_enabled=0 res=1 [ 0.673632] thermal_sys: Registered thermal governor 'step_wise' [ 0.673636] thermal_sys: Registered thermal governor 'user_space' [ 0.673824] ACPI FADT declares the system doesn't support PCIe ASPM, so disable it [ 0.674341] PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0x80000000-0x8fffffff] (base 0x80000000) [ 0.674567] PCI: MMCONFIG at [mem 0x80000000-0x8fffffff] reserved in E820 [ 0.910656] PCI: Using configuration type 1 for base access [ 0.914050] kprobes: kprobe jump-optimization is enabled. All kprobes are optimized if possible. [ 0.914654] ACPI: Added _OSI(Module Device) [ 0.914766] ACPI: Added _OSI(Processor Device) [ 0.914906] ACPI: Added _OSI(3.0 _SCP Extensions) [ 0.915564] ACPI: Added _OSI(Processor Aggregator Device) [ 1.094348] ACPI: 2 ACPI AML tables successfully acquired and loaded [ 1.109589] xen: registering gsi 9 triggering 0 polarity 0 [ 1.115869] ACPI: Interpreter enabled [ 1.116036] ACPI: PM: (supports S0 S1 S4 S5) [ 1.116172] ACPI: Using IOAPIC for interrupt routing [ 1.116359] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug [ 1.116530] PCI: Using E820 reservations for host bridge windows [ 1.117104] ACPI: Enabled 5 GPEs in block 00 to 3F [ 1.138912] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-fe]) [ 1.139072] acpi PNP0A08:00: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI HPX-Type3] [ 1.139417] acpi PNP0A08:00: _OSC: platform does not support [PME LTR] [ 1.139800] acpi PNP0A08:00: _OSC: OS now controls [PCIeCapability] [ 1.139946] acpi PNP0A08:00: FADT indicates ASPM is unsupported, using BIOS configuration [ 1.140438] PCI host bridge to bus 0000:00 [ 1.140564] pci_bus 0000:00: root bus resource [io 0x0000-0x03af window] [ 1.140708] pci_bus 0000:00: root bus resource [io 0x03e0-0x0cf7 window] [ 1.140851] pci_bus 0000:00: root bus resource [io 0x03b0-0x03df window] [ 1.140992] pci_bus 0000:00: root bus resource [io 0x0d00-0xffff window] [ 1.141142] pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000dffff window] [ 1.141306] pci_bus 0000:00: root bus resource [mem 0xfed08000-0xfed08fff window] [ 1.141470] pci_bus 0000:00: root bus resource [mem 0xfed0e000-0xfed0ffff window] [ 1.141562] pci_bus 0000:00: root bus resource [mem 0x80000000-0xfbffffff window] [ 1.141727] pci_bus 0000:00: root bus resource [bus 00-fe] [ 1.142004] pci 0000:00:00.0: [8086:0e00] type 00 class 0x060000 [ 1.142661] pci 0000:00:00.0: PME# supported from D0 D3hot D3cold [ 1.143123] pci 0000:00:01.0: [8086:0e02] type 01 class 0x060400 [ 1.143950] pci 0000:00:01.0: PME# supported from D0 D3hot D3cold [ 1.144475] pci 0000:00:01.1: [8086:0e03] type 01 class 0x060400 [ 1.145200] pci 0000:00:01.1: PME# supported from D0 D3hot D3cold [ 1.145773] pci 0000:00:03.0: [8086:0e08] type 01 class 0x060400 [ 1.146284] pci 0000:00:03.0: enabling Extended Tags [ 1.146792] pci 0000:00:03.0: PME# supported from D0 D3hot D3cold [ 1.147379] pci 0000:00:04.0: [8086:0e20] type 00 class 0x088000 [ 1.147654] pci 0000:00:04.0: reg 0x10: [mem 0xfbb1c000-0xfbb1ffff 64bit] [ 1.148616] pci 0000:00:04.1: [8086:0e21] type 00 class 0x088000 [ 1.148889] pci 0000:00:04.1: reg 0x10: [mem 0xfbb18000-0xfbb1bfff 64bit] [ 1.149839] pci 0000:00:04.2: [8086:0e22] type 00 class 0x088000 [ 1.150150] pci 0000:00:04.2: reg 0x10: [mem 0xfbb14000-0xfbb17fff 64bit] [ 1.151107] pci 0000:00:04.3: [8086:0e23] type 00 class 0x088000 [ 1.151420] pci 0000:00:04.3: reg 0x10: [mem 0xfbb10000-0xfbb13fff 64bit] [ 1.152365] pci 0000:00:04.4: [8086:0e24] type 00 class 0x088000 [ 1.152678] pci 0000:00:04.4: reg 0x10: [mem 0xfbb0c000-0xfbb0ffff 64bit] [ 1.153623] pci 0000:00:04.5: [8086:0e25] type 00 class 0x088000 [ 1.153895] pci 0000:00:04.5: reg 0x10: [mem 0xfbb08000-0xfbb0bfff 64bit] [ 1.154882] pci 0000:00:04.6: [8086:0e26] type 00 class 0x088000 [ 1.155154] pci 0000:00:04.6: reg 0x10: [mem 0xfbb04000-0xfbb07fff 64bit] [ 1.156143] pci 0000:00:04.7: [8086:0e27] type 00 class 0x088000 [ 1.156415] pci 0000:00:04.7: reg 0x10: [mem 0xfbb00000-0xfbb03fff 64bit] [ 1.157394] pci 0000:00:05.0: [8086:0e28] type 00 class 0x088000 [ 1.158284] pci 0000:00:05.2: [8086:0e2a] type 00 class 0x088000 [ 1.159131] pci 0000:00:05.4: [8086:0e2c] type 00 class 0x080020 [ 1.159365] pci 0000:00:05.4: reg 0x10: [mem 0xfbb25000-0xfbb25fff] [ 1.160438] pci 0000:00:11.0: [8086:1d3e] type 01 class 0x060400 [ 1.161261] pci 0000:00:11.0: PME# supported from D0 D3hot D3cold [ 1.161802] pci 0000:00:16.0: [8086:1d3a] type 00 class 0x078000 [ 1.162076] pci 0000:00:16.0: reg 0x10: [mem 0xfed0e000-0xfed0e00f 64bit] [ 1.162750] pci 0000:00:16.0: PME# supported from D0 D3hot D3cold [ 1.163171] pci 0000:00:16.1: [8086:1d3b] type 00 class 0x078000 [ 1.163444] pci 0000:00:16.1: reg 0x10: [mem 0xfed0f000-0xfed0f00f 64bit] [ 1.164049] pci 0000:00:16.1: PME# supported from D0 D3hot D3cold [ 1.164563] pci 0000:00:1a.0: [8086:1d2d] type 00 class 0x0c0320 [ 1.164810] pci 0000:00:1a.0: reg 0x10: [mem 0xfbb23000-0xfbb233ff] [ 1.165570] pci 0000:00:1a.0: PME# supported from D0 D3hot D3cold [ 1.166023] pci 0000:00:1c.0: [8086:1d10] type 01 class 0x060400 [ 1.166849] pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold [ 1.167121] pci 0000:00:1c.0: Enabling MPC IRBNCE [ 1.167266] pci 0000:00:1c.0: Intel PCH root port ACS workaround enabled [ 1.167654] pci 0000:00:1c.1: [8086:1d12] type 01 class 0x060400 [ 1.168433] pci 0000:00:1c.1: PME# supported from D0 D3hot D3cold [ 1.168687] pci 0000:00:1c.1: Enabling MPC IRBNCE [ 1.168832] pci 0000:00:1c.1: Intel PCH root port ACS workaround enabled [ 1.169329] pci 0000:00:1d.0: [8086:1d26] type 00 class 0x0c0320 [ 1.169578] pci 0000:00:1d.0: reg 0x10: [mem 0xfbb22000-0xfbb223ff] [ 1.170347] pci 0000:00:1d.0: PME# supported from D0 D3hot D3cold [ 1.170798] pci 0000:00:1e.0: [8086:244e] type 01 class 0x060401 [ 1.171642] pci 0000:00:1f.0: [8086:1d41] type 00 class 0x060100 [ 1.172686] pci 0000:00:1f.2: [8086:1d02] type 00 class 0x010601 [ 1.172929] pci 0000:00:1f.2: reg 0x10: [io 0xf050-0xf057] [ 1.173159] pci 0000:00:1f.2: reg 0x14: [io 0xf040-0xf043] [ 1.173350] pci 0000:00:1f.2: reg 0x18: [io 0xf030-0xf037] [ 1.173541] pci 0000:00:1f.2: reg 0x1c: [io 0xf020-0xf023] [ 1.173616] pci 0000:00:1f.2: reg 0x20: [io 0xf000-0xf01f] [ 1.173808] pci 0000:00:1f.2: reg 0x24: [mem 0xfbb21000-0xfbb217ff] [ 1.174317] pci 0000:00:1f.2: PME# supported from D3hot [ 1.174732] pci 0000:00:1f.3: [8086:1d22] type 00 class 0x0c0500 [ 1.175005] pci 0000:00:1f.3: reg 0x10: [mem 0xfbb20000-0xfbb200ff 64bit] [ 1.175308] pci 0000:00:1f.3: reg 0x20: [io 0x1180-0x119f] [ 1.175832] pci 0000:00:1f.6: [8086:1d24] type 00 class 0x118000 [ 1.176109] pci 0000:00:1f.6: reg 0x10: [mem 0xfed08000-0xfed08fff 64bit] [ 1.177103] pci 0000:00:01.0: PCI bridge to [bus 01] [ 1.177540] pci 0000:00:01.1: PCI bridge to [bus 02] [ 1.177859] pci 0000:00:03.0: PCI bridge to [bus 03] [ 1.178407] pci 0000:04:00.0: [8086:1d6b] type 00 class 0x010700 [ 1.178690] pci 0000:04:00.0: reg 0x10: [mem 0xfa47c000-0xfa47ffff 64bit pref] [ 1.178942] pci 0000:04:00.0: reg 0x18: [mem 0xfa000000-0xfa3fffff 64bit pref] [ 1.179162] pci 0000:04:00.0: reg 0x20: [io 0xe000-0xe0ff] [ 1.179460] pci 0000:04:00.0: enabling Extended Tags [ 1.180022] pci 0000:04:00.0: reg 0x164: [mem 0xfa400000-0xfa403fff 64bit pref] [ 1.180189] pci 0000:04:00.0: VF(n) BAR0 space: [mem 0xfa400000-0xfa47bfff 64bit pref] (contains BAR0 for 31 VFs) [ 1.181115] pci 0000:00:11.0: PCI bridge to [bus 04] [ 1.181270] pci 0000:00:11.0: bridge window [io 0xe000-0xefff] [ 1.181458] pci 0000:00:11.0: bridge window [mem 0xfa000000-0xfa4fffff 64bit pref] [ 1.181899] pci 0000:05:00.0: [8086:10d3] type 00 class 0x020000 [ 1.182163] pci 0000:05:00.0: reg 0x10: [mem 0xfba00000-0xfba1ffff] [ 1.182475] pci 0000:05:00.0: reg 0x18: [io 0xd000-0xd01f] [ 1.182628] pci 0000:05:00.0: reg 0x1c: [mem 0xfba20000-0xfba23fff] [ 1.183362] pci 0000:05:00.0: PME# supported from D0 D3hot D3cold [ 1.184017] pci 0000:00:1c.0: PCI bridge to [bus 05] [ 1.184171] pci 0000:00:1c.0: bridge window [io 0xd000-0xdfff] [ 1.184327] pci 0000:00:1c.0: bridge window [mem 0xfba00000-0xfbafffff] [ 1.184880] pci 0000:06:00.0: [8086:10d3] type 00 class 0x020000 [ 1.185144] pci 0000:06:00.0: reg 0x10: [mem 0xfb900000-0xfb91ffff] [ 1.185415] pci 0000:06:00.0: reg 0x18: [io 0xc000-0xc01f] [ 1.185618] pci 0000:06:00.0: reg 0x1c: [mem 0xfb920000-0xfb923fff] [ 1.186390] pci 0000:06:00.0: PME# supported from D0 D3hot D3cold [ 1.187012] pci 0000:00:1c.1: PCI bridge to [bus 06] [ 1.187167] pci 0000:00:1c.1: bridge window [io 0xc000-0xcfff] [ 1.187322] pci 0000:00:1c.1: bridge window [mem 0xfb900000-0xfb9fffff] [ 1.187632] pci_bus 0000:07: extended config space not accessible [ 1.187853] pci 0000:07:01.0: [102b:0532] type 00 class 0x030000 [ 1.188098] pci 0000:07:01.0: reg 0x10: [mem 0xf9000000-0xf9ffffff pref] [ 1.188295] pci 0000:07:01.0: reg 0x14: [mem 0xfb800000-0xfb803fff] [ 1.188491] pci 0000:07:01.0: reg 0x18: [mem 0xfb000000-0xfb7fffff] [ 1.188879] pci 0000:07:01.0: Video device with shadowed ROM at [mem 0x000c0000-0x000dffff] [ 1.189579] pci 0000:00:1e.0: PCI bridge to [bus 07] (subtractive decode) [ 1.189755] pci 0000:00:1e.0: bridge window [mem 0xfb000000-0xfb8fffff] [ 1.189927] pci 0000:00:1e.0: bridge window [mem 0xf9000000-0xf9ffffff 64bit pref] [ 1.190092] pci 0000:00:1e.0: bridge window [io 0x0000-0x03af window] (subtractive decode) [ 1.195562] pci 0000:00:1e.0: bridge window [io 0x03e0-0x0cf7 window] (subtractive decode) [ 1.195772] pci 0000:00:1e.0: bridge window [io 0x03b0-0x03df window] (subtractive decode) [ 1.195940] pci 0000:00:1e.0: bridge window [io 0x0d00-0xffff window] (subtractive decode) [ 1.196108] pci 0000:00:1e.0: bridge window [mem 0x000a0000-0x000dffff window] (subtractive decode) [ 1.196278] pci 0000:00:1e.0: bridge window [mem 0xfed08000-0xfed08fff window] (subtractive decode) [ 1.196447] pci 0000:00:1e.0: bridge window [mem 0xfed0e000-0xfed0ffff window] (subtractive decode) [ 1.196562] pci 0000:00:1e.0: bridge window [mem 0x80000000-0xfbffffff window] (subtractive decode) [ 1.197095] pci_bus 0000:00: on NUMA node 0 [ 1.197245] xen: registering gsi 13 triggering 1 polarity 0 [ 1.198018] ACPI: PCI Root Bridge [UNC0] (domain 0000 [bus ff]) [ 1.198170] acpi PNP0A03:00: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI HPX-Type3] [ 1.198401] acpi PNP0A03:00: _OSC: OS now controls [PME PCIeCapability LTR] [ 1.198545] acpi PNP0A03:00: FADT indicates ASPM is unsupported, using BIOS configuration [ 1.198788] PCI host bridge to bus 0000:ff [ 1.198926] pci_bus 0000:ff: root bus resource [bus ff] [ 1.199168] pci 0000:ff:08.0: [8086:0e80] type 00 class 0x088000 [ 1.199880] pci 0000:ff:09.0: [8086:0e90] type 00 class 0x088000 [ 1.200534] pci 0000:ff:0a.0: [8086:0ec0] type 00 class 0x088000 [ 1.201060] pci 0000:ff:0a.1: [8086:0ec1] type 00 class 0x088000 [ 1.201660] pci 0000:ff:0a.2: [8086:0ec2] type 00 class 0x088000 [ 1.202303] pci 0000:ff:0a.3: [8086:0ec3] type 00 class 0x088000 [ 1.202932] pci 0000:ff:0b.0: [8086:0e1e] type 00 class 0x088000 [ 1.203538] pci 0000:ff:0b.3: [8086:0e1f] type 00 class 0x088000 [ 1.204045] pci 0000:ff:0c.0: [8086:0ee0] type 00 class 0x088000 [ 1.204648] pci 0000:ff:0c.1: [8086:0ee2] type 00 class 0x088000 [ 1.205323] pci 0000:ff:0d.0: [8086:0ee1] type 00 class 0x088000 [ 1.205921] pci 0000:ff:0d.1: [8086:0ee3] type 00 class 0x088000 [ 1.206604] pci 0000:ff:0e.0: [8086:0ea0] type 00 class 0x088000 [ 1.207204] pci 0000:ff:0e.1: [8086:0e30] type 00 class 0x110100 [ 1.207898] pci 0000:ff:0f.0: [8086:0ea8] type 00 class 0x088000 [ 1.208687] pci 0000:ff:0f.1: [8086:0e71] type 00 class 0x088000 [ 1.209516] pci 0000:ff:0f.2: [8086:0eaa] type 00 class 0x088000 [ 1.210243] pci 0000:ff:0f.3: [8086:0eab] type 00 class 0x088000 [ 1.211030] pci 0000:ff:0f.4: [8086:0eac] type 00 class 0x088000 [ 1.211851] pci 0000:ff:0f.5: [8086:0ead] type 00 class 0x088000 [ 1.212654] pci 0000:ff:10.0: [8086:0eb0] type 00 class 0x088000 [ 1.213478] pci 0000:ff:10.1: [8086:0eb1] type 00 class 0x088000 [ 1.214244] pci 0000:ff:10.2: [8086:0eb2] type 00 class 0x088000 [ 1.215031] pci 0000:ff:10.3: [8086:0eb3] type 00 class 0x088000 [ 1.215815] pci 0000:ff:10.4: [8086:0eb4] type 00 class 0x088000 [ 1.216604] pci 0000:ff:10.5: [8086:0eb5] type 00 class 0x088000 [ 1.217425] pci 0000:ff:10.6: [8086:0eb6] type 00 class 0x088000 [ 1.218204] pci 0000:ff:10.7: [8086:0eb7] type 00 class 0x088000 [ 1.219025] pci 0000:ff:13.0: [8086:0e1d] type 00 class 0x088000 [ 1.219666] pci 0000:ff:13.1: [8086:0e34] type 00 class 0x110100 [ 1.220276] pci 0000:ff:13.4: [8086:0e81] type 00 class 0x088000 [ 1.220873] pci 0000:ff:13.5: [8086:0e36] type 00 class 0x110100 [ 1.221539] pci 0000:ff:16.0: [8086:0ec8] type 00 class 0x088000 [ 1.222142] pci 0000:ff:16.1: [8086:0ec9] type 00 class 0x088000 [ 1.222782] pci 0000:ff:16.2: [8086:0eca] type 00 class 0x088000 [ 1.223448] pci_bus 0000:ff: on NUMA node 0 [ 1.223647] ACPI: PCI: Interrupt link LNKA configured for IRQ 11 [ 1.223937] ACPI: PCI: Interrupt link LNKB configured for IRQ 10 [ 1.224183] ACPI: PCI: Interrupt link LNKC configured for IRQ 5 [ 1.224430] ACPI: PCI: Interrupt link LNKD configured for IRQ 11 [ 1.224669] ACPI: PCI: Interrupt link LNKE configured for IRQ 0 [ 1.224918] ACPI: PCI: Interrupt link LNKF configured for IRQ 0 [ 1.225204] ACPI: PCI: Interrupt link LNKG configured for IRQ 0 [ 1.225450] ACPI: PCI: Interrupt link LNKH configured for IRQ 7 [ 1.227453] xen:balloon: Initialising balloon driver [ 1.227669] iommu: Default domain type: Translated [ 1.227810] iommu: DMA domain TLB invalidation policy: lazy mode [ 1.228042] SCSI subsystem initialized [ 1.228614] libata version 3.00 loaded. [ 1.228643] ACPI: bus type USB registered [ 1.228802] usbcore: registered new interface driver usbfs [ 1.228950] usbcore: registered new interface driver hub [ 1.229097] usbcore: registered new device driver usb [ 1.229291] pps_core: LinuxPPS API ver. 1 registered [ 1.229427] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti [ 1.229568] PTP clock support registered [ 1.230632] Advanced Linux Sound Architecture Driver Initialized. [ 1.230956] NetLabel: Initializing [ 1.231090] NetLabel: domain hash size = 128 [ 1.231265] NetLabel: protocols = UNLABELED CIPSOv4 CALIPSO [ 1.231265] NetLabel: unlabeled traffic allowed by default [ 1.231613] PCI: Using ACPI for IRQ routing [ 1.289826] PCI: pci_cache_line_size set to 64 bytes [ 1.290854] e820: reserve RAM buffer [mem 0x0009a000-0x0009ffff] [ 1.290859] e820: reserve RAM buffer [mem 0x20066000-0x23ffffff] [ 1.291608] pci 0000:07:01.0: vgaarb: setting as boot VGA device [ 1.291760] pci 0000:07:01.0: vgaarb: bridge control possible [ 1.291899] pci 0000:07:01.0: vgaarb: VGA device added: decodes=io+mem,owns=io+mem,locks=none [ 1.292076] vgaarb: loaded [ 1.293581] clocksource: Switched to clocksource tsc-early [ 1.293828] VFS: Disk quotas dquot_6.6.0 [ 1.293979] VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes) [ 1.294154] hugetlbfs: disabling because there are no supported hugepage sizes [ 1.294337] pnp: PnP ACPI init [ 1.294590] system 00:00: [mem 0xfc000000-0xfcffffff] has been reserved [ 1.294738] system 00:00: [mem 0xfd000000-0xfdffffff] has been reserved [ 1.294880] system 00:00: [mem 0xfe000000-0xfeafffff] has been reserved [ 1.295021] system 00:00: [mem 0xfeb00000-0xfebfffff] has been reserved [ 1.295307] system 00:01: [mem 0xfbffc000-0xfbffdfff] could not be reserved [ 1.295484] xen: registering gsi 8 triggering 1 polarity 0 [ 1.295642] system 00:03: [io 0x04d0-0x04d1] has been reserved [ 1.295789] system 00:03: [mem 0x00000400-0x000004ff] could not be reserved [ 1.296103] xen: registering gsi 12 triggering 1 polarity 0 [ 1.296342] system 00:06: [io 0x0b00-0x0b7f] has been reserved [ 1.296846] xen: registering gsi 4 triggering 1 polarity 0 [ 1.296853] Already setup the GSI :4 [ 1.296988] pnp 00:07: [dma 0 disabled] [ 1.297362] xen: registering gsi 3 triggering 1 polarity 0 [ 1.297378] pnp 00:08: [dma 0 disabled] [ 1.297862] system 00:09: [io 0x0400-0x0453] has been reserved [ 1.298015] system 00:09: [io 0x0458-0x047f] has been reserved [ 1.298155] system 00:09: [io 0x1180-0x119f] has been reserved [ 1.298295] system 00:09: [io 0x0500-0x057f] has been reserved [ 1.298436] system 00:09: [mem 0xfed1c000-0xfed1ffff] has been reserved [ 1.298597] system 00:09: [mem 0xfec00000-0xfecfffff] could not be reserved [ 1.298740] system 00:09: [mem 0xff000000-0xffffffff] has been reserved [ 1.299003] system 00:0a: [io 0x0454-0x0457] has been reserved [ 1.299541] system 00:0b: [mem 0x00000000-0x0009ffff] could not be reserved [ 1.299965] pnp: PnP ACPI: found 12 devices [ 1.348916] PM-Timer failed consistency check (0xffffff) - aborting. [ 1.349151] NET: Registered PF_INET protocol family [ 1.349361] IP idents hash table entries: 8192 (order: 4, 65536 bytes, linear) [ 1.349855] tcp_listen_portaddr_hash hash table entries: 256 (order: 0, 4096 bytes, linear) [ 1.350029] Table-perturb hash table entries: 65536 (order: 6, 262144 bytes, linear) [ 1.350196] TCP established hash table entries: 4096 (order: 3, 32768 bytes, linear) [ 1.350370] TCP bind hash table entries: 4096 (order: 5, 131072 bytes, linear) [ 1.350593] TCP: Hash tables configured (established 4096 bind 4096) [ 1.350806] UDP hash table entries: 256 (order: 1, 8192 bytes, linear) [ 1.351002] UDP-Lite hash table entries: 256 (order: 1, 8192 bytes, linear) [ 1.351184] NET: Registered PF_UNIX/PF_LOCAL protocol family [ 1.351710] RPC: Registered named UNIX socket transport module. [ 1.351862] RPC: Registered udp transport module. [ 1.351996] RPC: Registered tcp transport module. [ 1.352161] RPC: Registered tcp NFSv4.1 backchannel transport module. [ 1.352807] pci 0000:00:01.0: PCI bridge to [bus 01] [ 1.353019] pci 0000:00:01.1: PCI bridge to [bus 02] [ 1.353223] pci 0000:00:03.0: PCI bridge to [bus 03] [ 1.353428] pci 0000:00:11.0: PCI bridge to [bus 04] [ 1.353595] pci 0000:00:11.0: bridge window [io 0xe000-0xefff] [ 1.353777] pci 0000:00:11.0: bridge window [mem 0xfa000000-0xfa4fffff 64bit pref] [ 1.353975] pci 0000:00:1c.0: PCI bridge to [bus 05] [ 1.354118] pci 0000:00:1c.0: bridge window [io 0xd000-0xdfff] [ 1.354282] pci 0000:00:1c.0: bridge window [mem 0xfba00000-0xfbafffff] [ 1.354471] pci 0000:00:1c.1: PCI bridge to [bus 06] [ 1.354632] pci 0000:00:1c.1: bridge window [io 0xc000-0xcfff] [ 1.354798] pci 0000:00:1c.1: bridge window [mem 0xfb900000-0xfb9fffff] [ 1.354992] pci 0000:00:1e.0: PCI bridge to [bus 07] [ 1.355151] pci 0000:00:1e.0: bridge window [mem 0xfb000000-0xfb8fffff] [ 1.355308] pci 0000:00:1e.0: bridge window [mem 0xf9000000-0xf9ffffff 64bit pref] [ 1.355504] pci_bus 0000:00: resource 4 [io 0x0000-0x03af window] [ 1.355662] pci_bus 0000:00: resource 5 [io 0x03e0-0x0cf7 window] [ 1.355803] pci_bus 0000:00: resource 6 [io 0x03b0-0x03df window] [ 1.355943] pci_bus 0000:00: resource 7 [io 0x0d00-0xffff window] [ 1.356083] pci_bus 0000:00: resource 8 [mem 0x000a0000-0x000dffff window] [ 1.356229] pci_bus 0000:00: resource 9 [mem 0xfed08000-0xfed08fff window] [ 1.356371] pci_bus 0000:00: resource 10 [mem 0xfed0e000-0xfed0ffff window] [ 1.356512] pci_bus 0000:00: resource 11 [mem 0x80000000-0xfbffffff window] [ 1.356670] pci_bus 0000:04: resource 0 [io 0xe000-0xefff] [ 1.356807] pci_bus 0000:04: resource 2 [mem 0xfa000000-0xfa4fffff 64bit pref] [ 1.356971] pci_bus 0000:05: resource 0 [io 0xd000-0xdfff] [ 1.357115] pci_bus 0000:05: resource 1 [mem 0xfba00000-0xfbafffff] [ 1.357256] pci_bus 0000:06: resource 0 [io 0xc000-0xcfff] [ 1.357393] pci_bus 0000:06: resource 1 [mem 0xfb900000-0xfb9fffff] [ 1.357533] pci_bus 0000:07: resource 1 [mem 0xfb000000-0xfb8fffff] [ 1.357721] pci_bus 0000:07: resource 2 [mem 0xf9000000-0xf9ffffff 64bit pref] [ 1.357885] pci_bus 0000:07: resource 4 [io 0x0000-0x03af window] [ 1.358026] pci_bus 0000:07: resource 5 [io 0x03e0-0x0cf7 window] [ 1.358166] pci_bus 0000:07: resource 6 [io 0x03b0-0x03df window] [ 1.358306] pci_bus 0000:07: resource 7 [io 0x0d00-0xffff window] [ 1.358446] pci_bus 0000:07: resource 8 [mem 0x000a0000-0x000dffff window] [ 1.358603] pci_bus 0000:07: resource 9 [mem 0xfed08000-0xfed08fff window] [ 1.358745] pci_bus 0000:07: resource 10 [mem 0xfed0e000-0xfed0ffff window] [ 1.358887] pci_bus 0000:07: resource 11 [mem 0x80000000-0xfbffffff window] [ 1.359224] pci 0000:00:05.0: disabled boot interrupts on device [8086:0e28] [ 1.359537] xen: registering gsi 16 triggering 0 polarity 1 [ 1.359592] xen: --> pirq=16 -> irq=16 (gsi=16) [ 1.376774] pci 0000:00:1a.0: quirk_usb_early_handoff+0x0/0x720 took 16935 usecs [ 1.382504] xen: registering gsi 23 triggering 0 polarity 1 [ 1.382540] xen: --> pirq=23 -> irq=23 (gsi=23) [ 1.399776] pci 0000:00:1d.0: quirk_usb_early_handoff+0x0/0x720 took 16944 usecs [ 1.400373] PCI: CLS 64 bytes, default 64 [ 1.400523] PCI-DMA: Using software bounce buffering for IO (SWIOTLB) [ 1.400618] Unpacking initramfs... [ 1.400692] software IO TLB: mapped [mem 0x000000001b180000-0x000000001f180000] (64MB) [ 1.401103] kvm: no hardware support for 'kvm_intel' [ 1.401242] has_svm: not amd or hygon [ 1.401376] kvm: no hardware support for 'kvm_amd' [ 1.401515] clocksource: tsc: mask: 0xffffffffffffffff max_cycles: 0x19f228ab7a2, max_idle_ns: 440795289252 ns [ 1.401778] clocksource: Switched to clocksource tsc [ 1.409727] Initialise system trusted keyrings [ 1.410050] workingset: timestamp_bits=62 max_order=17 bucket_order=0 [ 1.411972] NFS: Registering the id_resolver key type [ 1.412121] Key type id_resolver registered [ 1.412254] Key type id_legacy registered [ 1.412487] 9p: Installing v9fs 9p2000 file system support [ 1.430061] Key type asymmetric registered [ 1.430211] Asymmetric key parser 'x509' registered [ 1.430383] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 251) [ 1.430597] io scheduler mq-deadline registered [ 1.430734] io scheduler kyber registered [ 1.431806] xen: registering gsi 26 triggering 0 polarity 1 [ 1.431847] xen: --> pirq=26 -> irq=26 (gsi=26) [ 1.432643] xen: registering gsi 26 triggering 0 polarity 1 [ 1.432652] Already setup the GSI :26 [ 1.433485] xen: registering gsi 40 triggering 0 polarity 1 [ 1.433536] xen: --> pirq=40 -> irq=40 (gsi=40) [ 1.434245] xen: registering gsi 16 triggering 0 polarity 1 [ 1.434253] Already setup the GSI :16 [ 1.434762] xen: registering gsi 17 triggering 0 polarity 1 [ 1.434790] xen: --> pirq=17 -> irq=17 (gsi=17) [ 1.435150] xen: registering gsi 16 triggering 0 polarity 1 [ 1.435157] Already setup the GSI :16 [ 1.435832] input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input0 [ 1.436419] ACPI: button: Power Button [PWRB] [ 1.436642] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input1 [ 1.437223] ACPI: button: Power Button [PWRF] [ 1.437626] Monitor-Mwait will be used to enter C-1 state [ 1.437686] Monitor-Mwait will be used to enter C-2 state [ 1.437717] ACPI: \_SB_.SCK0.C000: Found 2 idle states [ 1.439707] ACPI: \_SB_.SCK0.C002: Found 2 idle states [ 1.441446] ACPI: \_SB_.SCK0.C004: Found 2 idle states [ 1.443152] ACPI: \_SB_.SCK0.C006: Found 2 idle states [ 1.445323] xen:xen_evtchn: Event-channel device installed [ 1.445606] xen_pciback: backend is vpci [ 1.446770] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled [ 1.447239] 00:08: ttyS1 at I/O 0x2f8 (irq = 3, base_baud = 115200) is a 16550A [ 1.448233] hpet_acpi_add: no address or irqs in _CRS [ 1.448493] Non-volatile memory driver v1.3 [ 1.448648] AMD-Vi: AMD IOMMUv2 functionality not available on this system - This is not a bug. [ 1.451850] loop: module loaded [ 1.460140] ahci 0000:00:1f.2: version 3.0 [ 1.460278] xen: registering gsi 18 triggering 0 polarity 1 [ 1.460319] xen: --> pirq=18 -> irq=18 (gsi=18) [ 1.470744] ahci 0000:00:1f.2: AHCI 0001.0300 32 slots 6 ports 6 Gbps 0x3f impl SATA mode [ 1.470924] ahci 0000:00:1f.2: flags: 64bit ncq sntf pm led clo pio slum part ems apst [ 1.486435] scsi host0: ahci [ 1.487025] scsi host1: ahci [ 1.487517] scsi host2: ahci [ 1.488034] scsi host3: ahci [ 1.488494] scsi host4: ahci [ 1.489034] scsi host5: ahci [ 1.489220] ata1: SATA max UDMA/133 abar m2048@0xfbb21000 port 0xfbb21100 irq 75 [ 1.489388] ata2: SATA max UDMA/133 abar m2048@0xfbb21000 port 0xfbb21180 irq 75 [ 1.489574] ata3: SATA max UDMA/133 abar m2048@0xfbb21000 port 0xfbb21200 irq 75 [ 1.489739] ata4: SATA max UDMA/133 abar m2048@0xfbb21000 port 0xfbb21280 irq 75 [ 1.489902] ata5: SATA max UDMA/133 abar m2048@0xfbb21000 port 0xfbb21300 irq 75 [ 1.490106] ata6: SATA max UDMA/133 abar m2048@0xfbb21000 port 0xfbb21380 irq 75 [ 1.490719] tun: Universal TUN/TAP device driver, 1.6 [ 1.491029] e100: Intel(R) PRO/100 Network Driver [ 1.491170] e100: Copyright(c) 1999-2006 Intel Corporation [ 1.491337] sky2: driver version 1.30 [ 1.491610] xen_netfront: Initialising Xen virtual ethernet driver [ 1.492067] xen: registering gsi 16 triggering 0 polarity 1 [ 1.492080] Already setup the GSI :16 [ 1.492339] ehci-pci 0000:00:1a.0: EHCI Host Controller [ 1.492618] ehci-pci 0000:00:1a.0: new USB bus registered, assigned bus number 1 [ 1.492836] ehci-pci 0000:00:1a.0: debug port 2 [ 1.497012] ehci-pci 0000:00:1a.0: irq 16, io mem 0xfbb23000 [ 1.503539] ehci-pci 0000:00:1a.0: USB 2.0 started, EHCI 1.00 [ 1.503862] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 6.01 [ 1.504059] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 1.504222] usb usb1: Product: EHCI Host Controller [ 1.504357] usb usb1: Manufacturer: Linux 6.1.95+ ehci_hcd [ 1.504493] usb usb1: SerialNumber: 0000:00:1a.0 [ 1.504894] hub 1-0:1.0: USB hub found [ 1.505054] hub 1-0:1.0: 2 ports detected [ 1.505605] xen: registering gsi 23 triggering 0 polarity 1 [ 1.505616] Already setup the GSI :23 [ 1.505853] ehci-pci 0000:00:1d.0: EHCI Host Controller [ 1.506098] ehci-pci 0000:00:1d.0: new USB bus registered, assigned bus number 2 [ 1.506312] ehci-pci 0000:00:1d.0: debug port 2 [ 1.510536] ehci-pci 0000:00:1d.0: irq 23, io mem 0xfbb22000 [ 1.517560] ehci-pci 0000:00:1d.0: USB 2.0 started, EHCI 1.00 [ 1.517954] usb usb2: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 6.01 [ 1.518124] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 1.518287] usb usb2: Product: EHCI Host Controller [ 1.518422] usb usb2: Manufacturer: Linux 6.1.95+ ehci_hcd [ 1.518580] usb usb2: SerialNumber: 0000:00:1d.0 [ 1.518968] hub 2-0:1.0: USB hub found [ 1.519128] hub 2-0:1.0: 2 ports detected [ 1.519712] usbcore: registered new interface driver usblp [ 1.519876] usbcore: registered new interface driver usb-storage [ 1.520069] i8042: PNP: PS/2 Controller [PNP0f03:PS2M] at 0x60,0x64 irq 12 [ 1.520222] i8042: PNP: PS/2 controller doesn't have KBD irq; using default 1 [ 1.523688] serio: i8042 KBD port at 0x60,0x64 irq 1 [ 1.523833] serio: i8042 AUX port at 0x60,0x64 irq 12 [ 1.524414] rtc_cmos 00:02: RTC can wake from S4 [ 1.525330] rtc_cmos 00:02: registered as rtc0 [ 1.525568] rtc_cmos 00:02: alarms up to one month, y3k, 114 bytes nvram [ 1.525816] device-mapper: uevent: version 1.0.3 [ 1.526047] xen: registering gsi 18 triggering 0 polarity 1 [ 1.526062] Already setup the GSI :18 [ 1.526106] device-mapper: ioctl: 4.47.0-ioctl (2022-07-28) initialised: dm-devel@redhat.com [ 1.526384] i801_smbus 0000:00:1f.3: SMBus using PCI interrupt [ 1.526392] intel_pstate: CPU model not supported [ 1.526462] i2c i2c-0: 1/6 memory slots populated (from DMI) [ 1.526578] hid: raw HID events driver (C) Jiri Kosina [ 1.526700] i2c i2c-0: Systems with more than 4 memory slots not supported yet, not instantiating SPD [ 1.526883] usbcore: registered new interface driver usbhid [ 1.527263] usbhid: USB HID core driver [ 1.528082] Initializing XFRM netlink socket [ 1.528390] NET: Registered PF_INET6 protocol family [ 1.529175] Segment Routing with IPv6 [ 1.529321] In-situ OAM (IOAM) with IPv6 [ 1.529523] sit: IPv6, IPv4 and MPLS over IPv4 tunneling driver [ 1.529837] NET: Registered PF_PACKET protocol family [ 1.530031] 9pnet: Installing 9P2000 support [ 1.530189] Key type dns_resolver registered [ 1.530995] IPI shorthand broadcast: enabled [ 1.531173] sched_clock: Marking stable (1425439799, 105495901)->(1704339995, -173404295) [ 1.531924] registered taskstats version 1 [ 1.532062] Loading compiled-in X.509 certificates [ 1.536081] PM: Magic number: 12:273:722 [ 1.536242] block loop2: hash matches [ 1.536425] acpi LNXCPU:55: hash matches [ 1.536630] printk: console [netcon0] enabled [ 1.536768] netconsole: network logging started [ 1.537190] cfg80211: Loading compiled-in X.509 certificates for regulatory database [ 1.549151] Freeing initrd memory: 19884K [ 1.569213] cfg80211: Loaded X.509 cert 'sforshee: 00b28ddf47aef9cea7' [ 1.569704] cfg80211: Loaded X.509 cert 'wens: 61c038651aabdcf94bd0ac7ff06c7248db18c600' [ 1.570564] ALSA device list: [ 1.570669] cfg80211: loaded regulatory.db is malformed or signature is missing/invalid [ 1.570719] No soundcards found. [ 1.747599] usb 1-1: new high-speed USB device number 2 using ehci-pci [ 1.755590] usb 2-1: new high-speed USB device number 2 using ehci-pci [ 1.800689] ata5: SATA link down (SStatus 0 SControl 300) [ 1.800856] ata2: SATA link down (SStatus 0 SControl 300) [ 1.801024] ata4: SATA link down (SStatus 0 SControl 300) [ 1.801191] ata6: SATA link down (SStatus 0 SControl 300) [ 1.801361] ata1: SATA link up 6.0 Gbps (SStatus 133 SControl 300) [ 1.801548] ata3: SATA link down (SStatus 0 SControl 300) [ 1.802376] ata1.00: ATA-8: WDC WD1003FBYZ-010FB0, 01.01V03, max UDMA/133 [ 1.803034] ata1.00: 1953525168 sectors, multi 16: LBA48 NCQ (depth 32), AA [ 1.804285] ata1.00: configured for UDMA/133 [ 1.804811] scsi 0:0:0:0: Direct-Access ATA WDC WD1003FBYZ-0 1V03 PQ: 0 ANSI: 5 [ 1.806372] sd 0:0:0:0: Attached scsi generic sg0 type 0 [ 1.806473] sd 0:0:0:0: [sda] 1953525168 512-byte logical blocks: (1.00 TB/932 GiB) [ 1.806776] sd 0:0:0:0: [sda] Write Protect is off [ 1.806919] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00 [ 1.807036] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 1.807371] sd 0:0:0:0: [sda] Preferred minimum I/O size 512 bytes [ 1.836096] sda: sda1 sda2 < sda5 > [ 1.836695] sd 0:0:0:0: [sda] Attached SCSI disk [ 1.838604] Freeing unused kernel image (initmem) memory: 1576K [ 1.838757] Write protecting the kernel read-only data: 22528k [ 1.875988] usb 1-1: New USB device found, idVendor=8087, idProduct=0024, bcdDevice= 0.00 [ 1.876166] usb 1-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0 [ 1.876661] hub 1-1:1.0: USB hub found [ 1.876987] hub 1-1:1.0: 6 ports detected [ 1.877845] Freeing unused kernel image (text/rodata gap) memory: 2032K [ 1.879806] Freeing unused kernel image (rodata/data gap) memory: 1568K [ 1.883975] usb 2-1: New USB device found, idVendor=8087, idProduct=0024, bcdDevice= 0.00 [ 1.884147] usb 2-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0 [ 1.884647] hub 2-1:1.0: USB hub found [ 1.884855] hub 2-1:1.0: 8 ports detected [ 2.153560] usb 1-1.1: new full-speed USB device number 3 using ehci-pci [ 2.233779] usb 1-1.1: New USB device found, idVendor=0557, idProduct=2221, bcdDevice= 0.01 [ 2.233958] usb 1-1.1: New USB device strings: Mfr=1, Product=2, SerialNumber=0 [ 2.234123] usb 1-1.1: Product: Hermon USB hidmouse Device [ 2.234260] usb 1-1.1: Manufacturer: Winbond Electronics Corp [ 2.236206] input: Winbond Electronics Corp Hermon USB hidmouse Device as /devices/pci0000:00/0000:00:1a.0/usb1/1-1/1-1.1/1-1.1:1.0/0003:0557:2221.0001/input/input5 [ 2.236667] hid-generic 0003:0557:2221.0001: input,hidraw0: USB HID v1.00 Mouse [Winbond Electronics Corp Hermon USB hidmouse Device] on usb-0000:00:1a.0-1.1/input0 [ 2.238138] input: Winbond Electronics Corp Hermon USB hidmouse Device as /devices/pci0000:00/0000:00:1a.0/usb1/1-1/1-1.1/1-1.1:1.1/0003:0557:2221.0002/input/input6 [ 2.289805] hid-generic 0003:0557:2221.0002: input,hidraw1: USB HID v1.00 Keyboard [Winbond Electronics Corp Hermon USB hidmouse Device] on usb-0000:00:1a.0-1.1/input1 [ 2.641168] x86/mm: Checked W+X mappings: passed, no W+X pages found. [ 2.641391] Run /init as init process [ 2.641563] with arguments: [ 2.641565] /init [ 2.641566] placeholder [ 2.641568] with environment: [ 2.641569] HOME=/ [ 2.641570] TERM=linux [ 3.340143] e1000e: Intel(R) PRO/1000 Network Driver [ 3.340296] e1000e: Copyright(c) 1999 - 2015 Intel Corporation. [ 3.340614] xen: registering gsi 16 triggering 0 polarity 1 [ 3.340626] Already setup the GSI :16 [ 3.341181] e1000e 0000:05:00.0: Interrupt Throttling Rate (ints/sec) set to dynamic conservative mode [ 3.347547] isci: Intel(R) C600 SAS Controller Driver - version 1.2.0 [ 3.347726] isci 0000:04:00.0: driver configured for rev: 6 silicon [ 3.347931] isci 0000:04:00.0: OEM SAS parameters (version: 1.3) loaded (firmware) [ 3.348211] xen: registering gsi 16 triggering 0 polarity 1 [ 3.348220] Already setup the GSI :16 [ 3.353386] isci 0000:04:00.0: SCU controller 0: phy 3-0 cables: {short, short, short, short} [ 3.356200] scsi host6: isci [ 3.391648] e1000e 0000:05:00.0 0000:05:00.0 (uninitialized): registered PHC clock [ 3.435759] e1000e 0000:05:00.0 eth0: (PCI Express:2.5GT/s:Width x1) 00:25:90:eb:25:a6 [ 3.435940] e1000e 0000:05:00.0 eth0: Intel(R) PRO/1000 Network Connection [ 3.436172] e1000e 0000:05:00.0 eth0: MAC: 3, PHY: 8, PBA No: FFFFFF-0FF [ 3.436516] xen: registering gsi 17 triggering 0 polarity 1 [ 3.436527] Already setup the GSI :17 [ 3.437110] e1000e 0000:06:00.0: Interrupt Throttling Rate (ints/sec) set to dynamic conservative mode [ 3.484871] e1000e 0000:06:00.0 0000:06:00.0 (uninitialized): registered PHC clock [ 3.530888] e1000e 0000:06:00.0 eth1: (PCI Express:2.5GT/s:Width x1) 00:25:90:eb:25:a7 [ 3.531067] e1000e 0000:06:00.0 eth1: Intel(R) PRO/1000 Network Connection [ 3.531298] e1000e 0000:06:00.0 eth1: MAC: 3, PHY: 8, PBA No: FFFFFF-0FF [ 3.535063] e1000e 0000:05:00.0 enx002590eb25a6: renamed from eth0 [ 3.541212] e1000e 0000:06:00.0 enx002590eb25a7: renamed from eth1 [ 4.372204] EXT4-fs (dm-0): mounting ext3 file system using the ext4 subsystem [ 4.378287] EXT4-fs (dm-0): mounted filesystem with ordered data mode. Quota mode: none. [ 9.236907] EXT4-fs (dm-0): re-mounted. Quota mode: none. [ 10.974013] EXT4-fs (sda1): mounting ext3 file system using the ext4 subsystem [ 11.002878] EXT4-fs (sda1): mounted filesystem with ordered data mode. Quota mode: none. [ 11.126598] Adding 1949692k swap on /dev/mapper/fiano1--vg-swap_1. Priority:-2 extents:1 across:1949692k [ 12.894787] xenbr0: port 1(enx002590eb25a6) entered blocking state [ 12.894963] xenbr0: port 1(enx002590eb25a6) entered disabled state [ 12.895235] device enx002590eb25a6 entered promiscuous mode [ 15.992611] e1000e 0000:05:00.0 enx002590eb25a6: NIC Link is Up 1000 Mbps Full Duplex, Flow Control: None [ 15.993153] IPv6: ADDRCONF(NETDEV_CHANGE): enx002590eb25a6: link becomes ready [ 15.993354] xenbr0: port 1(enx002590eb25a6) entered blocking state [ 15.993517] xenbr0: port 1(enx002590eb25a6) entered forwarding state [ 15.993766] IPv6: ADDRCONF(NETDEV_CHANGE): xenbr0: link becomes ready