[ 0.000000] microcode: microcode updated early to revision 0x42e, date = 2019-03-14 [ 0.000000] Linux version 6.1.0-21-amd64 (debian-kernel@lists.debian.org) (gcc-12 (Debian 12.2.0-14) 12.2.0, GNU ld (GNU Binutils for Debian) 2.40) #1 SMP PREEMPT_DYNAMIC Debian 6.1.90-1 (2024-05-03) [ 0.000000] Command line: BOOT_IMAGE=/vmlinuz-6.1.0-21-amd64 root=/dev/mapper/fiano1--vg-root ro console=ttyS0,115200n8 [ 0.000000] BIOS-provided physical RAM map: [ 0.000000] BIOS-e820: [mem 0x0000000000000000-0x000000000009abff] usable [ 0.000000] BIOS-e820: [mem 0x000000000009ac00-0x000000000009ffff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000000e0000-0x00000000000fffff] reserved [ 0.000000] BIOS-e820: [mem 0x0000000000100000-0x000000007de2bfff] usable [ 0.000000] BIOS-e820: [mem 0x000000007de2c000-0x000000007debafff] reserved [ 0.000000] BIOS-e820: [mem 0x000000007debb000-0x000000007dfc3fff] ACPI data [ 0.000000] BIOS-e820: [mem 0x000000007dfc4000-0x000000007e1e0fff] ACPI NVS [ 0.000000] BIOS-e820: [mem 0x000000007e1e1000-0x000000007f36afff] reserved [ 0.000000] BIOS-e820: [mem 0x000000007f36b000-0x000000007f7fffff] ACPI NVS [ 0.000000] BIOS-e820: [mem 0x0000000080000000-0x000000008fffffff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000fed1c000-0x00000000fed3ffff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000ff000000-0x00000000ffffffff] reserved [ 0.000000] BIOS-e820: [mem 0x0000000100000000-0x000000027fffffff] usable [ 0.000000] NX (Execute Disable) protection: active [ 0.000000] SMBIOS 2.7 present. [ 0.000000] DMI: Supermicro X9DBL-3F/X9DBL-iF/X9DBL-3F/X9DBL-iF, BIOS 3.00 12/06/2013 [ 0.000000] tsc: Fast TSC calibration using PIT [ 0.000000] tsc: Detected 1799.847 MHz processor [ 0.000874] e820: update [mem 0x00000000-0x00000fff] usable ==> reserved [ 0.000878] e820: remove [mem 0x000a0000-0x000fffff] usable [ 0.000889] last_pfn = 0x280000 max_arch_pfn = 0x400000000 [ 0.001028] x86/PAT: Configuration [0-7]: WB WC UC- UC WB WP UC- WT [ 0.001676] e820: update [mem 0x80000000-0xffffffff] usable ==> reserved [ 0.001686] last_pfn = 0x7de2c max_arch_pfn = 0x400000000 [ 0.018710] found SMP MP-table at [mem 0x000fd8e0-0x000fd8ef] [ 0.018736] Using GB pages for direct mapping [ 0.019121] RAMDISK: [mem 0x3329b000-0x35944fff] [ 0.019130] ACPI: Early table checksum verification disabled [ 0.019134] ACPI: RSDP 0x00000000000F04A0 000024 (v02 SUPERM) [ 0.019141] ACPI: XSDT 0x000000007DEF1088 00008C (v01 SUPERM SMCI--MB 00000001 AMI 00010013) [ 0.019149] ACPI: FACP 0x000000007DEFBAB0 0000F4 (v04 SUPERM SMCI--MB 00000001 AMI 00010013) [ 0.019157] ACPI: DSDT 0x000000007DEF11A0 00A910 (v02 SUPERM SMCI--MB 00000000 INTL 20091112) [ 0.019163] ACPI: FACS 0x000000007E1D8080 000040 [ 0.019167] ACPI: APIC 0x000000007DEFBBA8 000090 (v03 00000001 AMI 00010013) [ 0.019172] ACPI: FPDT 0x000000007DEFBC38 000044 (v01 00000001 AMI 00010013) [ 0.019177] ACPI: HPET 0x000000007DEFBC80 000038 (v01 SUPERM SMCI--MB 00000001 AMI. 00000005) [ 0.019182] ACPI: PRAD 0x000000007DEFBCB8 0000BE (v02 PRADID PRADTID 00000001 MSFT 04000000) [ 0.019187] ACPI: SPMI 0x000000007DEFBD78 000040 (v05 A M I OEMSPMI 00000000 AMI. 00000000) [ 0.019192] ACPI: SSDT 0x000000007DEFBDB8 0C7AE8 (v02 INTEL CpuPm 00004000 INTL 20091112) [ 0.019198] ACPI: EINJ 0x000000007DFC38A0 000130 (v01 AMI AMI EINJ 00000000 00000000) [ 0.019203] ACPI: ERST 0x000000007DFC39D0 000230 (v01 AMIER AMI ERST 00000000 00000000) [ 0.019208] ACPI: HEST 0x000000007DFC3C00 0000A8 (v01 AMI AMI HEST 00000000 00000000) [ 0.019213] ACPI: BERT 0x000000007DFC3CA8 000030 (v01 AMI AMI BERT 00000000 00000000) [ 0.019218] ACPI: DMAR 0x000000007DFC3CD8 0000B4 (v01 A M I OEMDMAR 00000001 INTL 00000001) [ 0.019223] ACPI: MCFG 0x000000007DFC3D90 00003C (v01 SUPERM SMCI--MB 00000001 MSFT 00000097) [ 0.019227] ACPI: Reserving FACP table memory at [mem 0x7defbab0-0x7defbba3] [ 0.019229] ACPI: Reserving DSDT table memory at [mem 0x7def11a0-0x7defbaaf] [ 0.019231] ACPI: Reserving FACS table memory at [mem 0x7e1d8080-0x7e1d80bf] [ 0.019232] ACPI: Reserving APIC table memory at [mem 0x7defbba8-0x7defbc37] [ 0.019234] ACPI: Reserving FPDT table memory at [mem 0x7defbc38-0x7defbc7b] [ 0.019235] ACPI: Reserving HPET table memory at [mem 0x7defbc80-0x7defbcb7] [ 0.019237] ACPI: Reserving PRAD table memory at [mem 0x7defbcb8-0x7defbd75] [ 0.019238] ACPI: Reserving SPMI table memory at [mem 0x7defbd78-0x7defbdb7] [ 0.019239] ACPI: Reserving SSDT table memory at [mem 0x7defbdb8-0x7dfc389f] [ 0.019241] ACPI: Reserving EINJ table memory at [mem 0x7dfc38a0-0x7dfc39cf] [ 0.019242] ACPI: Reserving ERST table memory at [mem 0x7dfc39d0-0x7dfc3bff] [ 0.019243] ACPI: Reserving HEST table memory at [mem 0x7dfc3c00-0x7dfc3ca7] [ 0.019245] ACPI: Reserving BERT table memory at [mem 0x7dfc3ca8-0x7dfc3cd7] [ 0.019246] ACPI: Reserving DMAR table memory at [mem 0x7dfc3cd8-0x7dfc3d8b] [ 0.019247] ACPI: Reserving MCFG table memory at [mem 0x7dfc3d90-0x7dfc3dcb] [ 0.019318] No NUMA configuration found [ 0.019319] Faking a node at [mem 0x0000000000000000-0x000000027fffffff] [ 0.019335] NODE_DATA(0) allocated [mem 0x27ffd5000-0x27fffffff] [ 0.019803] Zone ranges: [ 0.019804] DMA [mem 0x0000000000001000-0x0000000000ffffff] [ 0.019808] DMA32 [mem 0x0000000001000000-0x00000000ffffffff] [ 0.019810] Normal [mem 0x0000000100000000-0x000000027fffffff] [ 0.019812] Device empty [ 0.019814] Movable zone start for each node [ 0.019818] Early memory node ranges [ 0.019819] node 0: [mem 0x0000000000001000-0x0000000000099fff] [ 0.019821] node 0: [mem 0x0000000000100000-0x000000007de2bfff] [ 0.019823] node 0: [mem 0x0000000100000000-0x000000027fffffff] [ 0.019827] Initmem setup node 0 [mem 0x0000000000001000-0x000000027fffffff] [ 0.019834] On node 0, zone DMA: 1 pages in unavailable ranges [ 0.019889] On node 0, zone DMA: 102 pages in unavailable ranges [ 0.028015] On node 0, zone Normal: 8660 pages in unavailable ranges [ 0.028312] ACPI: PM-Timer IO Port: 0x408 [ 0.028324] ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1]) [ 0.028326] ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1]) [ 0.028328] ACPI: LAPIC_NMI (acpi_id[0x02] high edge lint[0x1]) [ 0.028329] ACPI: LAPIC_NMI (acpi_id[0x03] high edge lint[0x1]) [ 0.028341] IOAPIC[0]: apic_id 0, version 32, address 0xfec00000, GSI 0-23 [ 0.028348] IOAPIC[1]: apic_id 2, version 32, address 0xfec01000, GSI 24-47 [ 0.028351] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl) [ 0.028354] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level) [ 0.028361] ACPI: Using ACPI (MADT) for SMP configuration information [ 0.028363] ACPI: HPET id: 0x8086a701 base: 0xfed00000 [ 0.028370] TSC deadline timer available [ 0.028372] smpboot: Allowing 4 CPUs, 0 hotplug CPUs [ 0.028393] PM: hibernation: Registered nosave memory: [mem 0x00000000-0x00000fff] [ 0.028396] PM: hibernation: Registered nosave memory: [mem 0x0009a000-0x0009afff] [ 0.028397] PM: hibernation: Registered nosave memory: [mem 0x0009b000-0x0009ffff] [ 0.028399] PM: hibernation: Registered nosave memory: [mem 0x000a0000-0x000dffff] [ 0.028400] PM: hibernation: Registered nosave memory: [mem 0x000e0000-0x000fffff] [ 0.028402] PM: hibernation: Registered nosave memory: [mem 0x7de2c000-0x7debafff] [ 0.028403] PM: hibernation: Registered nosave memory: [mem 0x7debb000-0x7dfc3fff] [ 0.028405] PM: hibernation: Registered nosave memory: [mem 0x7dfc4000-0x7e1e0fff] [ 0.028406] PM: hibernation: Registered nosave memory: [mem 0x7e1e1000-0x7f36afff] [ 0.028407] PM: hibernation: Registered nosave memory: [mem 0x7f36b000-0x7f7fffff] [ 0.028409] PM: hibernation: Registered nosave memory: [mem 0x7f800000-0x7fffffff] [ 0.028410] PM: hibernation: Registered nosave memory: [mem 0x80000000-0x8fffffff] [ 0.028411] PM: hibernation: Registered nosave memory: [mem 0x90000000-0xfed1bfff] [ 0.028412] PM: hibernation: Registered nosave memory: [mem 0xfed1c000-0xfed3ffff] [ 0.028413] PM: hibernation: Registered nosave memory: [mem 0xfed40000-0xfeffffff] [ 0.028415] PM: hibernation: Registered nosave memory: [mem 0xff000000-0xffffffff] [ 0.028417] [mem 0x90000000-0xfed1bfff] available for PCI devices [ 0.028419] Booting paravirtualized kernel on bare hardware [ 0.028422] clocksource: refined-jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645519600211568 ns [ 0.035864] setup_percpu: NR_CPUS:8192 nr_cpumask_bits:4 nr_cpu_ids:4 nr_node_ids:1 [ 0.036258] percpu: Embedded 61 pages/cpu s212992 r8192 d28672 u524288 [ 0.036267] pcpu-alloc: s212992 r8192 d28672 u524288 alloc=1*2097152 [ 0.036271] pcpu-alloc: [0] 0 1 2 3 [ 0.036311] Fallback order for Node 0: 0 [ 0.036315] Built 1 zonelists, mobility grouping on. Total pages: 2055603 [ 0.036317] Policy zone: Normal [ 0.036319] Kernel command line: BOOT_IMAGE=/vmlinuz-6.1.0-21-amd64 root=/dev/mapper/fiano1--vg-root ro console=ttyS0,115200n8 [ 0.036390] Unknown kernel command line parameters "BOOT_IMAGE=/vmlinuz-6.1.0-21-amd64", will be passed to user space. [ 0.036404] random: crng init done [ 0.037453] Dentry cache hash table entries: 1048576 (order: 11, 8388608 bytes, linear) [ 0.038021] Inode-cache hash table entries: 524288 (order: 10, 4194304 bytes, linear) [ 0.038109] mem auto-init: stack:all(zero), heap alloc:on, heap free:off [ 0.038123] software IO TLB: area num 4. [ 0.079231] Memory: 2033856K/8353556K available (14342K kernel code, 2332K rwdata, 9060K rodata, 2796K init, 17404K bss, 304404K reserved, 0K cma-reserved) [ 0.079445] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1 [ 0.079466] Kernel/User page tables isolation: enabled [ 0.079519] ftrace: allocating 40220 entries in 158 pages [ 0.089873] ftrace: allocated 158 pages with 5 groups [ 0.090822] Dynamic Preempt: voluntary [ 0.090865] rcu: Preemptible hierarchical RCU implementation. [ 0.090867] rcu: RCU restricting CPUs from NR_CPUS=8192 to nr_cpu_ids=4. [ 0.090869] Trampoline variant of Tasks RCU enabled. [ 0.090869] Rude variant of Tasks RCU enabled. [ 0.090870] Tracing variant of Tasks RCU enabled. [ 0.090871] rcu: RCU calculated value of scheduler-enlistment delay is 25 jiffies. [ 0.090872] rcu: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=4 [ 0.098209] NR_IRQS: 524544, nr_irqs: 864, preallocated irqs: 16 [ 0.098417] rcu: srcu_init: Setting srcu_struct sizes based on contention. [ 0.103066] Console: colour VGA+ 80x25 [ 1.027526] printk: console [ttyS0] enabled [ 1.031731] ACPI: Core revision 20220331 [ 1.036382] clocksource: hpet: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 133484882848 ns [ 1.045521] APIC: Switch to symmetric I/O mode setup [ 1.050504] DMAR: Host address width 46 [ 1.054353] DMAR: DRHD base: 0x000000fbffc000 flags: 0x1 [ 1.059679] DMAR: dmar0: reg_base_addr fbffc000 ver 1:0 cap d2078c106f0466 ecap f020de [ 1.067602] DMAR: RMRR base: 0x0000007de91000 end: 0x0000007de9dfff [ 1.073878] DMAR: ATSR flags: 0x0 [ 1.077198] DMAR: RHSA base: 0x000000fbffc000 proximity domain: 0x0 [ 1.083475] DMAR-IR: IOAPIC id 0 under DRHD base 0xfbffc000 IOMMU 0 [ 1.089833] DMAR-IR: IOAPIC id 2 under DRHD base 0xfbffc000 IOMMU 0 [ 1.096186] DMAR-IR: HPET id 0 under DRHD base 0xfbffc000 [ 1.101586] DMAR-IR: Queued invalidation will be enabled to support x2apic and Intr-remapping. [ 1.110714] DMAR-IR: Enabled IRQ remapping in x2apic mode [ 1.116116] x2apic enabled [ 1.118842] Switched APIC routing to cluster x2apic. [ 1.124352] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1 [ 1.149529] clocksource: tsc-early: mask: 0xffffffffffffffff max_cycles: 0x19f19909803, max_idle_ns: 440795248079 ns [ 1.160047] Calibrating delay loop (skipped), value calculated using timer frequency.. 3599.69 BogoMIPS (lpj=7199388) [ 1.164077] CPU0: Thermal monitoring enabled (TM1) [ 1.168130] process: using mwait in idle threads [ 1.172047] Last level iTLB entries: 4KB 512, 2MB 8, 4MB 8 [ 1.176045] Last level dTLB entries: 4KB 512, 2MB 0, 4MB 0, 1GB 4 [ 1.180048] Spectre V1 : Mitigation: usercopy/swapgs barriers and __user pointer sanitization [ 1.184046] Spectre V2 : Mitigation: Retpolines [ 1.188044] Spectre V2 : Spectre v2 / SpectreRSB mitigation: Filling RSB on context switch [ 1.192044] Spectre V2 : Spectre v2 / SpectreRSB : Filling RSB on VMEXIT [ 1.196044] Spectre V2 : Enabling Restricted Speculation for firmware calls [ 1.200046] Spectre V2 : mitigation: Enabling conditional Indirect Branch Prediction Barrier [ 1.204046] Speculative Store Bypass: Mitigation: Speculative Store Bypass disabled via prctl [ 1.208045] MDS: Mitigation: Clear CPU buffers [ 1.212044] MMIO Stale Data: Unknown: No mitigations [ 1.216050] x86/fpu: Supporting XSAVE feature 0x001: 'x87 floating point registers' [ 1.220044] x86/fpu: Supporting XSAVE feature 0x002: 'SSE registers' [ 1.224044] x86/fpu: Supporting XSAVE feature 0x004: 'AVX registers' [ 1.228045] x86/fpu: xstate_offset[2]: 576, xstate_sizes[2]: 256 [ 1.232045] x86/fpu: Enabled xstate features 0x7, context size is 832 bytes, using 'standard' format. [ 1.260859] Freeing SMP alternatives memory: 36K [ 1.264045] pid_max: default: 32768 minimum: 301 [ 1.268078] LSM: Security Framework initializing [ 1.272064] landlock: Up and running. [ 1.276044] Yama: disabled by default; enable with sysctl kernel.yama.* [ 1.280076] AppArmor: AppArmor initialized [ 1.284047] TOMOYO Linux initialized [ 1.288051] LSM support for eBPF active [ 1.292092] Mount-cache hash table entries: 16384 (order: 5, 131072 bytes, linear) [ 1.296060] Mountpoint-cache hash table entries: 16384 (order: 5, 131072 bytes, linear) [ 1.300675] smpboot: CPU0: Intel(R) Xeon(R) CPU E5-2403 v2 @ 1.80GHz (family: 0x6, model: 0x3e, stepping: 0x4) [ 1.304236] cblist_init_generic: Setting adjustable number of callback queues. [ 1.308046] cblist_init_generic: Setting shift to 2 and lim to 1. [ 1.312076] cblist_init_generic: Setting adjustable number of callback queues. [ 1.316045] cblist_init_generic: Setting shift to 2 and lim to 1. [ 1.320067] cblist_init_generic: Setting adjustable number of callback queues. [ 1.324045] cblist_init_generic: Setting shift to 2 and lim to 1. [ 1.328066] Performance Events: PEBS fmt1+, IvyBridge events, 16-deep LBR, full-width counters, Intel PMU driver. [ 1.332046] ... version: 3 [ 1.336045] ... bit width: 48 [ 1.340045] ... generic registers: 8 [ 1.344045] ... value mask: 0000ffffffffffff [ 1.348045] ... max period: 00007fffffffffff [ 1.352045] ... fixed-purpose events: 3 [ 1.356045] ... event mask: 00000007000000ff [ 1.360280] signal: max sigframe size: 1776 [ 1.364070] Estimated ratio of average max frequency by base frequency (times 1024): 1024 [ 1.368078] rcu: Hierarchical SRCU implementation. [ 1.372045] rcu: Max phase no-delay instances is 1000. [ 1.376727] NMI watchdog: Enabled. Permanently consumes one hw-PMU counter. [ 1.380140] smp: Bringing up secondary CPUs ... [ 1.384194] x86: Booting SMP configuration: [ 1.388050] .... node #0, CPUs: #1 #2 #3 [ 1.403192] smp: Brought up 1 node, 4 CPUs [ 1.408046] smpboot: Max logical packages: 1 [ 1.412045] smpboot: Total of 4 processors activated (14398.77 BogoMIPS) [ 1.436165] node 0 deferred pages initialised in 20ms [ 1.440491] devtmpfs: initialized [ 1.444125] x86/mm: Memory block size: 128MB [ 1.449104] ACPI: PM: Registering ACPI NVS region [mem 0x7dfc4000-0x7e1e0fff] (2215936 bytes) [ 1.452096] ACPI: PM: Registering ACPI NVS region [mem 0x7f36b000-0x7f7fffff] (4804608 bytes) [ 1.456200] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645041785100000 ns [ 1.460058] futex hash table entries: 1024 (order: 4, 65536 bytes, linear) [ 1.464108] pinctrl core: initialized pinctrl subsystem [ 1.468911] NET: Registered PF_NETLINK/PF_ROUTE protocol family [ 1.472326] DMA: preallocated 1024 KiB GFP_KERNEL pool for atomic allocations [ 1.476203] DMA: preallocated 1024 KiB GFP_KERNEL|GFP_DMA pool for atomic allocations [ 1.480204] DMA: preallocated 1024 KiB GFP_KERNEL|GFP_DMA32 pool for atomic allocations [ 1.484054] audit: initializing netlink subsys (disabled) [ 1.488062] audit: type=2000 audit(1719408103.400:1): state=initialized audit_enabled=0 res=1 [ 1.488197] thermal_sys: Registered thermal governor 'fair_share' [ 1.492048] thermal_sys: Registered thermal governor 'bang_bang' [ 1.496045] thermal_sys: Registered thermal governor 'step_wise' [ 1.500045] thermal_sys: Registered thermal governor 'user_space' [ 1.504045] thermal_sys: Registered thermal governor 'power_allocator' [ 1.508063] cpuidle: using governor ladder [ 1.516050] cpuidle: using governor menu [ 1.520022] ACPI FADT declares the system doesn't support PCIe ASPM, so disable it [ 1.520047] acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5 [ 1.524148] PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0x80000000-0x8fffffff] (base 0x80000000) [ 1.528048] PCI: MMCONFIG at [mem 0x80000000-0x8fffffff] reserved in E820 [ 1.532054] pmd_set_huge: Cannot satisfy [mem 0x80000000-0x80200000] with a huge-page mapping due to MTRR override. [ 1.536470] PCI: Using configuration type 1 for base access [ 1.540143] core: PMU erratum BJ122, BV98, HSD29 workaround disabled, HT off [ 1.545391] kprobes: kprobe jump-optimization is enabled. All kprobes are optimized if possible. [ 1.548108] HugeTLB: registered 1.00 GiB page size, pre-allocated 0 pages [ 1.552049] HugeTLB: 16380 KiB vmemmap can be freed for a 1.00 GiB page [ 1.556046] HugeTLB: registered 2.00 MiB page size, pre-allocated 0 pages [ 1.560045] HugeTLB: 28 KiB vmemmap can be freed for a 2.00 MiB page [ 1.564199] ACPI: Added _OSI(Module Device) [ 1.568058] ACPI: Added _OSI(Processor Device) [ 1.572045] ACPI: Added _OSI(3.0 _SCP Extensions) [ 1.576045] ACPI: Added _OSI(Processor Aggregator Device) [ 1.695111] ACPI: 2 ACPI AML tables successfully acquired and loaded [ 1.719173] ACPI: Interpreter enabled [ 1.720066] ACPI: PM: (supports S0 S1 S4 S5) [ 1.724045] ACPI: Using IOAPIC for interrupt routing [ 1.728156] HEST: Table parsing has been initialized. [ 1.732169] GHES: APEI firmware first mode is enabled by WHEA _OSC. [ 1.736049] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug [ 1.740045] PCI: Using E820 reservations for host bridge windows [ 1.744597] ACPI: Enabled 5 GPEs in block 00 to 3F [ 1.748208] ACPI BIOS Error (bug): Could not resolve symbol [\_SB.PRAD], AE_NOT_FOUND (20220331/psargs-330) [ 1.752048] ACPI Error: Aborting method \_GPE._L24 due to previous error (AE_NOT_FOUND) (20220331/psparse-529) [ 1.756048] ACPI Error: AE_NOT_FOUND, while evaluating GPE method [_L24] (20220331/evgpe-511) [ 1.758216] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-fe]) [ 1.760043] acpi PNP0A08:00: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI HPX-Type3] [ 1.776142] acpi PNP0A08:00: _OSC: platform does not support [SHPCHotplug PME AER LTR] [ 1.784200] acpi PNP0A08:00: _OSC: OS now controls [PCIeHotplug PCIeCapability] [ 1.792046] acpi PNP0A08:00: FADT indicates ASPM is unsupported, using BIOS configuration [ 1.800408] PCI host bridge to bus 0000:00 [ 1.804048] pci_bus 0000:00: root bus resource [io 0x0000-0x03af window] [ 1.808045] pci_bus 0000:00: root bus resource [io 0x03e0-0x0cf7 window] [ 1.816049] pci_bus 0000:00: root bus resource [io 0x03b0-0x03df window] [ 1.824045] pci_bus 0000:00: root bus resource [io 0x0d00-0xffff window] [ 1.832046] pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000dffff window] [ 1.836045] pci_bus 0000:00: root bus resource [mem 0xfed08000-0xfed08fff window] [ 1.844045] pci_bus 0000:00: root bus resource [mem 0xfed0e000-0xfed0ffff window] [ 1.852045] pci_bus 0000:00: root bus resource [mem 0x80000000-0xfbffffff window] [ 1.860046] pci_bus 0000:00: root bus resource [bus 00-fe] [ 1.864076] pci 0000:00:00.0: [8086:0e00] type 00 class 0x060000 [ 1.872129] pci 0000:00:00.0: PME# supported from D0 D3hot D3cold [ 1.876165] pci 0000:00:01.0: [8086:0e02] type 01 class 0x060400 [ 1.884145] pci 0000:00:01.0: PME# supported from D0 D3hot D3cold [ 1.892215] pci 0000:00:01.1: [8086:0e03] type 01 class 0x060400 [ 1.896143] pci 0000:00:01.1: PME# supported from D0 D3hot D3cold [ 1.904207] pci 0000:00:03.0: [8086:0e08] type 01 class 0x060400 [ 1.908083] pci 0000:00:03.0: enabling Extended Tags [ 1.912110] pci 0000:00:03.0: PME# supported from D0 D3hot D3cold [ 1.920194] pci 0000:00:04.0: [8086:0e20] type 00 class 0x088000 [ 1.924062] pci 0000:00:04.0: reg 0x10: [mem 0xfbb1c000-0xfbb1ffff 64bit] [ 1.932185] pci 0000:00:04.1: [8086:0e21] type 00 class 0x088000 [ 1.940064] pci 0000:00:04.1: reg 0x10: [mem 0xfbb18000-0xfbb1bfff 64bit] [ 1.944189] pci 0000:00:04.2: [8086:0e22] type 00 class 0x088000 [ 1.952061] pci 0000:00:04.2: reg 0x10: [mem 0xfbb14000-0xfbb17fff 64bit] [ 1.960180] pci 0000:00:04.3: [8086:0e23] type 00 class 0x088000 [ 1.964061] pci 0000:00:04.3: reg 0x10: [mem 0xfbb10000-0xfbb13fff 64bit] [ 1.972185] pci 0000:00:04.4: [8086:0e24] type 00 class 0x088000 [ 1.976061] pci 0000:00:04.4: reg 0x10: [mem 0xfbb0c000-0xfbb0ffff 64bit] [ 1.984182] pci 0000:00:04.5: [8086:0e25] type 00 class 0x088000 [ 1.992061] pci 0000:00:04.5: reg 0x10: [mem 0xfbb08000-0xfbb0bfff 64bit] [ 1.996179] pci 0000:00:04.6: [8086:0e26] type 00 class 0x088000 [ 2.004061] pci 0000:00:04.6: reg 0x10: [mem 0xfbb04000-0xfbb07fff 64bit] [ 2.012180] pci 0000:00:04.7: [8086:0e27] type 00 class 0x088000 [ 2.016061] pci 0000:00:04.7: reg 0x10: [mem 0xfbb00000-0xfbb03fff 64bit] [ 2.024185] pci 0000:00:05.0: [8086:0e28] type 00 class 0x088000 [ 2.028169] pci 0000:00:05.2: [8086:0e2a] type 00 class 0x088000 [ 2.036168] pci 0000:00:05.4: [8086:0e2c] type 00 class 0x080020 [ 2.040057] pci 0000:00:05.4: reg 0x10: [mem 0xfbb25000-0xfbb25fff] [ 2.048197] pci 0000:00:11.0: [8086:1d3e] type 01 class 0x060400 [ 2.056165] pci 0000:00:11.0: PME# supported from D0 D3hot D3cold [ 2.060193] pci 0000:00:16.0: [8086:1d3a] type 00 class 0x078000 [ 2.068066] pci 0000:00:16.0: reg 0x10: [mem 0xfed0e000-0xfed0e00f 64bit] [ 2.072114] pci 0000:00:16.0: PME# supported from D0 D3hot D3cold [ 2.080141] pci 0000:00:16.1: [8086:1d3b] type 00 class 0x078000 [ 2.084063] pci 0000:00:16.1: reg 0x10: [mem 0xfed0f000-0xfed0f00f 64bit] [ 2.092113] pci 0000:00:16.1: PME# supported from D0 D3hot D3cold [ 2.100149] pci 0000:00:1a.0: [8086:1d2d] type 00 class 0x0c0320 [ 2.104061] pci 0000:00:1a.0: reg 0x10: [mem 0xfbb23000-0xfbb233ff] [ 2.112136] pci 0000:00:1a.0: PME# supported from D0 D3hot D3cold [ 2.116151] pci 0000:00:1c.0: [8086:1d10] type 01 class 0x060400 [ 2.124145] pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold [ 2.128073] pci 0000:00:1c.0: Enabling MPC IRBNCE [ 2.136047] pci 0000:00:1c.0: Intel PCH root port ACS workaround enabled [ 2.140146] pci 0000:00:1c.1: [8086:1d12] type 01 class 0x060400 [ 2.148145] pci 0000:00:1c.1: PME# supported from D0 D3hot D3cold [ 2.152069] pci 0000:00:1c.1: Enabling MPC IRBNCE [ 2.156046] pci 0000:00:1c.1: Intel PCH root port ACS workaround enabled [ 2.164161] pci 0000:00:1d.0: [8086:1d26] type 00 class 0x0c0320 [ 2.172062] pci 0000:00:1d.0: reg 0x10: [mem 0xfbb22000-0xfbb223ff] [ 2.176141] pci 0000:00:1d.0: PME# supported from D0 D3hot D3cold [ 2.184152] pci 0000:00:1e.0: [8086:244e] type 01 class 0x060401 [ 2.188194] pci 0000:00:1f.0: [8086:1d41] type 00 class 0x060100 [ 2.196273] pci 0000:00:1f.2: [8086:1d02] type 00 class 0x010601 [ 2.200058] pci 0000:00:1f.2: reg 0x10: [io 0xf050-0xf057] [ 2.208052] pci 0000:00:1f.2: reg 0x14: [io 0xf040-0xf043] [ 2.212052] pci 0000:00:1f.2: reg 0x18: [io 0xf030-0xf037] [ 2.220052] pci 0000:00:1f.2: reg 0x1c: [io 0xf020-0xf023] [ 2.224052] pci 0000:00:1f.2: reg 0x20: [io 0xf000-0xf01f] [ 2.228052] pci 0000:00:1f.2: reg 0x24: [mem 0xfbb21000-0xfbb217ff] [ 2.236089] pci 0000:00:1f.2: PME# supported from D3hot [ 2.240137] pci 0000:00:1f.3: [8086:1d22] type 00 class 0x0c0500 [ 2.248063] pci 0000:00:1f.3: reg 0x10: [mem 0xfbb20000-0xfbb200ff 64bit] [ 2.252066] pci 0000:00:1f.3: reg 0x20: [io 0x1180-0x119f] [ 2.260121] pci 0000:00:1f.6: [8086:1d24] type 00 class 0x118000 [ 2.264066] pci 0000:00:1f.6: reg 0x10: [mem 0xfed08000-0xfed08fff 64bit] [ 2.272210] pci 0000:00:01.0: PCI bridge to [bus 01] [ 2.276095] pci 0000:00:01.1: PCI bridge to [bus 02] [ 2.284094] pci 0000:00:03.0: PCI bridge to [bus 03] [ 2.288121] pci 0000:04:00.0: [8086:1d6b] type 00 class 0x010700 [ 2.292068] pci 0000:04:00.0: reg 0x10: [mem 0xfa47c000-0xfa47ffff 64bit pref] [ 2.300059] pci 0000:04:00.0: reg 0x18: [mem 0xfa000000-0xfa3fffff 64bit pref] [ 2.308054] pci 0000:04:00.0: reg 0x20: [io 0xe000-0xe0ff] [ 2.312071] pci 0000:04:00.0: enabling Extended Tags [ 2.320154] pci 0000:04:00.0: reg 0x164: [mem 0xfa400000-0xfa403fff 64bit pref] [ 2.328046] pci 0000:04:00.0: VF(n) BAR0 space: [mem 0xfa400000-0xfa47bfff 64bit pref] (contains BAR0 for 31 VFs) [ 2.336301] pci 0000:00:11.0: PCI bridge to [bus 04] [ 2.340048] pci 0000:00:11.0: bridge window [io 0xe000-0xefff] [ 2.348053] pci 0000:00:11.0: bridge window [mem 0xfa000000-0xfa4fffff 64bit pref] [ 2.356145] pci 0000:05:00.0: [8086:10d3] type 00 class 0x020000 [ 2.360080] pci 0000:05:00.0: reg 0x10: [mem 0xfba00000-0xfba1ffff] [ 2.368082] pci 0000:05:00.0: reg 0x18: [io 0xd000-0xd01f] [ 2.372064] pci 0000:05:00.0: reg 0x1c: [mem 0xfba20000-0xfba23fff] [ 2.380231] pci 0000:05:00.0: PME# supported from D0 D3hot D3cold [ 2.384259] pci 0000:00:1c.0: PCI bridge to [bus 05] [ 2.392048] pci 0000:00:1c.0: bridge window [io 0xd000-0xdfff] [ 2.396047] pci 0000:00:1c.0: bridge window [mem 0xfba00000-0xfbafffff] [ 2.404156] pci 0000:06:00.0: [8086:10d3] type 00 class 0x020000 [ 2.412081] pci 0000:06:00.0: reg 0x10: [mem 0xfb900000-0xfb91ffff] [ 2.416082] pci 0000:06:00.0: reg 0x18: [io 0xc000-0xc01f] [ 2.424064] pci 0000:06:00.0: reg 0x1c: [mem 0xfb920000-0xfb923fff] [ 2.428232] pci 0000:06:00.0: PME# supported from D0 D3hot D3cold [ 2.436256] pci 0000:00:1c.1: PCI bridge to [bus 06] [ 2.440048] pci 0000:00:1c.1: bridge window [io 0xc000-0xcfff] [ 2.444050] pci 0000:00:1c.1: bridge window [mem 0xfb900000-0xfb9fffff] [ 2.452068] pci_bus 0000:07: extended config space not accessible [ 2.460074] pci 0000:07:01.0: [102b:0532] type 00 class 0x030000 [ 2.464061] pci 0000:07:01.0: reg 0x10: [mem 0xf9000000-0xf9ffffff pref] [ 2.472053] pci 0000:07:01.0: reg 0x14: [mem 0xfb800000-0xfb803fff] [ 2.476053] pci 0000:07:01.0: reg 0x18: [mem 0xfb000000-0xfb7fffff] [ 2.484092] pci 0000:07:01.0: Video device with shadowed ROM at [mem 0x000c0000-0x000dffff] [ 2.492150] pci 0000:00:1e.0: PCI bridge to [bus 07] (subtractive decode) [ 2.500049] pci 0000:00:1e.0: bridge window [mem 0xfb000000-0xfb8fffff] [ 2.508049] pci 0000:00:1e.0: bridge window [mem 0xf9000000-0xf9ffffff 64bit pref] [ 2.512045] pci 0000:00:1e.0: bridge window [io 0x0000-0x03af window] (subtractive decode) [ 2.524045] pci 0000:00:1e.0: bridge window [io 0x03e0-0x0cf7 window] (subtractive decode) [ 2.532045] pci 0000:00:1e.0: bridge window [io 0x03b0-0x03df window] (subtractive decode) [ 2.540045] pci 0000:00:1e.0: bridge window [io 0x0d00-0xffff window] (subtractive decode) [ 2.548045] pci 0000:00:1e.0: bridge window [mem 0x000a0000-0x000dffff window] (subtractive decode) [ 2.556045] pci 0000:00:1e.0: bridge window [mem 0xfed08000-0xfed08fff window] (subtractive decode) [ 2.568047] pci 0000:00:1e.0: bridge window [mem 0xfed0e000-0xfed0ffff window] (subtractive decode) [ 2.576045] pci 0000:00:1e.0: bridge window [mem 0x80000000-0xfbffffff window] (subtractive decode) [ 2.584835] ACPI: PCI Root Bridge [UNC0] (domain 0000 [bus ff]) [ 2.592049] acpi PNP0A03:00: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI HPX-Type3] [ 2.600065] acpi PNP0A03:00: _OSC: OS now controls [PCIeHotplug SHPCHotplug PME AER PCIeCapability LTR] [ 2.608045] acpi PNP0A03:00: FADT indicates ASPM is unsupported, using BIOS configuration [ 2.620113] PCI host bridge to bus 0000:ff [ 2.624047] pci_bus 0000:ff: root bus resource [bus ff] [ 2.628059] pci 0000:ff:08.0: [8086:0e80] type 00 class 0x088000 [ 2.632126] pci 0000:ff:09.0: [8086:0e90] type 00 class 0x088000 [ 2.640116] pci 0000:ff:0a.0: [8086:0ec0] type 00 class 0x088000 [ 2.644110] pci 0000:ff:0a.1: [8086:0ec1] type 00 class 0x088000 [ 2.652105] pci 0000:ff:0a.2: [8086:0ec2] type 00 class 0x088000 [ 2.656105] pci 0000:ff:0a.3: [8086:0ec3] type 00 class 0x088000 [ 2.664106] pci 0000:ff:0b.0: [8086:0e1e] type 00 class 0x088000 [ 2.668104] pci 0000:ff:0b.3: [8086:0e1f] type 00 class 0x088000 [ 2.676105] pci 0000:ff:0c.0: [8086:0ee0] type 00 class 0x088000 [ 2.680107] pci 0000:ff:0c.1: [8086:0ee2] type 00 class 0x088000 [ 2.688113] pci 0000:ff:0d.0: [8086:0ee1] type 00 class 0x088000 [ 2.696108] pci 0000:ff:0d.1: [8086:0ee3] type 00 class 0x088000 [ 2.700106] pci 0000:ff:0e.0: [8086:0ea0] type 00 class 0x088000 [ 2.708108] pci 0000:ff:0e.1: [8086:0e30] type 00 class 0x110100 [ 2.712115] pci 0000:ff:0f.0: [8086:0ea8] type 00 class 0x088000 [ 2.720131] pci 0000:ff:0f.1: [8086:0e71] type 00 class 0x088000 [ 2.724128] pci 0000:ff:0f.2: [8086:0eaa] type 00 class 0x088000 [ 2.732132] pci 0000:ff:0f.3: [8086:0eab] type 00 class 0x088000 [ 2.736128] pci 0000:ff:0f.4: [8086:0eac] type 00 class 0x088000 [ 2.744127] pci 0000:ff:0f.5: [8086:0ead] type 00 class 0x088000 [ 2.748128] pci 0000:ff:10.0: [8086:0eb0] type 00 class 0x088000 [ 2.756129] pci 0000:ff:10.1: [8086:0eb1] type 00 class 0x088000 [ 2.760127] pci 0000:ff:10.2: [8086:0eb2] type 00 class 0x088000 [ 2.768127] pci 0000:ff:10.3: [8086:0eb3] type 00 class 0x088000 [ 2.772129] pci 0000:ff:10.4: [8086:0eb4] type 00 class 0x088000 [ 2.780134] pci 0000:ff:10.5: [8086:0eb5] type 00 class 0x088000 [ 2.784127] pci 0000:ff:10.6: [8086:0eb6] type 00 class 0x088000 [ 2.792129] pci 0000:ff:10.7: [8086:0eb7] type 00 class 0x088000 [ 2.796126] pci 0000:ff:13.0: [8086:0e1d] type 00 class 0x088000 [ 2.804103] pci 0000:ff:13.1: [8086:0e34] type 00 class 0x110100 [ 2.808105] pci 0000:ff:13.4: [8086:0e81] type 00 class 0x088000 [ 2.816105] pci 0000:ff:13.5: [8086:0e36] type 00 class 0x110100 [ 2.820111] pci 0000:ff:16.0: [8086:0ec8] type 00 class 0x088000 [ 2.828108] pci 0000:ff:16.1: [8086:0ec9] type 00 class 0x088000 [ 2.832103] pci 0000:ff:16.2: [8086:0eca] type 00 class 0x088000 [ 2.840268] ACPI: PCI: Interrupt link LNKA configured for IRQ 11 [ 2.848100] ACPI: PCI: Interrupt link LNKB configured for IRQ 10 [ 2.852097] ACPI: PCI: Interrupt link LNKC configured for IRQ 5 [ 2.860097] ACPI: PCI: Interrupt link LNKD configured for IRQ 11 [ 2.864097] ACPI: PCI: Interrupt link LNKE configured for IRQ 0 [ 2.872097] ACPI: PCI: Interrupt link LNKF configured for IRQ 0 [ 2.876097] ACPI: PCI: Interrupt link LNKG configured for IRQ 0 [ 2.884096] ACPI: PCI: Interrupt link LNKH configured for IRQ 7 [ 2.889699] iommu: Default domain type: Translated [ 2.896047] iommu: DMA domain TLB invalidation policy: lazy mode [ 2.900139] pps_core: LinuxPPS API ver. 1 registered [ 2.904046] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti [ 2.916059] PTP clock support registered [ 2.920045] EDAC MC: Ver: 3.0.0 [ 2.924308] NetLabel: Initializing [ 2.927712] NetLabel: domain hash size = 128 [ 2.932048] NetLabel: protocols = UNLABELED CIPSOv4 CALIPSO [ 2.936067] NetLabel: unlabeled traffic allowed by default [ 2.940045] PCI: Using ACPI for IRQ routing [ 2.951047] PCI: pci_cache_line_size set to 64 bytes [ 2.951172] e820: reserve RAM buffer [mem 0x0009ac00-0x0009ffff] [ 2.951175] e820: reserve RAM buffer [mem 0x7de2c000-0x7fffffff] [ 2.952088] pci 0000:07:01.0: vgaarb: setting as boot VGA device [ 2.956043] pci 0000:07:01.0: vgaarb: bridge control possible [ 2.956043] pci 0000:07:01.0: vgaarb: VGA device added: decodes=io+mem,owns=io+mem,locks=none [ 2.972052] vgaarb: loaded [ 2.976588] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0, 0, 0, 0, 0, 0 [ 2.984046] hpet0: 8 comparators, 64-bit 14.318180 MHz counter [ 2.992044] clocksource: Switched to clocksource tsc-early [ 2.997729] VFS: Disk quotas dquot_6.6.0 [ 3.001677] VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes) [ 3.008750] AppArmor: AppArmor Filesystem Enabled [ 3.013482] pnp: PnP ACPI init [ 3.016696] system 00:00: [mem 0xfc000000-0xfcffffff] has been reserved [ 3.023313] system 00:00: [mem 0xfd000000-0xfdffffff] has been reserved [ 3.029924] system 00:00: [mem 0xfe000000-0xfeafffff] has been reserved [ 3.036535] system 00:00: [mem 0xfeb00000-0xfebfffff] has been reserved [ 3.043282] system 00:01: [mem 0xfbffc000-0xfbffdfff] could not be reserved [ 3.050384] system 00:03: [io 0x04d0-0x04d1] has been reserved [ 3.056309] system 00:03: [mem 0x00000400-0x000004ff] could not be reserved [ 3.063595] system 00:06: [io 0x0b00-0x0b7f] has been reserved [ 3.069730] pnp 00:07: [dma 0 disabled] [ 3.069967] pnp 00:08: [dma 0 disabled] [ 3.070259] system 00:09: [io 0x0400-0x0453] has been reserved [ 3.076184] system 00:09: [io 0x0458-0x047f] has been reserved [ 3.082103] system 00:09: [io 0x1180-0x119f] has been reserved [ 3.088021] system 00:09: [io 0x0500-0x057f] has been reserved [ 3.093942] system 00:09: [mem 0xfed1c000-0xfed1ffff] has been reserved [ 3.100553] system 00:09: [mem 0xfec00000-0xfecfffff] could not be reserved [ 3.107513] system 00:09: [mem 0xff000000-0xffffffff] has been reserved [ 3.114228] system 00:0a: [io 0x0454-0x0457] has been reserved [ 3.120430] system 00:0b: [mem 0x00000000-0x0009ffff] could not be reserved [ 3.127665] pnp: PnP ACPI: found 12 devices [ 3.138369] clocksource: acpi_pm: mask: 0xffffff max_cycles: 0xffffff, max_idle_ns: 2085701024 ns [ 3.147337] NET: Registered PF_INET protocol family [ 3.152406] IP idents hash table entries: 131072 (order: 8, 1048576 bytes, linear) [ 3.162735] tcp_listen_portaddr_hash hash table entries: 4096 (order: 4, 65536 bytes, linear) [ 3.171309] Table-perturb hash table entries: 65536 (order: 6, 262144 bytes, linear) [ 3.179142] TCP established hash table entries: 65536 (order: 7, 524288 bytes, linear) [ 3.187440] TCP bind hash table entries: 65536 (order: 9, 2097152 bytes, linear) [ 3.195237] TCP: Hash tables configured (established 65536 bind 65536) [ 3.201864] MPTCP token hash table entries: 8192 (order: 5, 196608 bytes, linear) [ 3.209418] UDP hash table entries: 4096 (order: 5, 131072 bytes, linear) [ 3.216246] UDP-Lite hash table entries: 4096 (order: 5, 131072 bytes, linear) [ 3.223538] NET: Registered PF_UNIX/PF_LOCAL protocol family [ 3.229205] NET: Registered PF_XDP protocol family [ 3.234016] pci 0000:00:01.0: PCI bridge to [bus 01] [ 3.238990] pci 0000:00:01.1: PCI bridge to [bus 02] [ 3.243964] pci 0000:00:03.0: PCI bridge to [bus 03] [ 3.248940] pci 0000:00:11.0: PCI bridge to [bus 04] [ 3.253907] pci 0000:00:11.0: bridge window [io 0xe000-0xefff] [ 3.260006] pci 0000:00:11.0: bridge window [mem 0xfa000000-0xfa4fffff 64bit pref] [ 3.267754] pci 0000:00:1c.0: PCI bridge to [bus 05] [ 3.272723] pci 0000:00:1c.0: bridge window [io 0xd000-0xdfff] [ 3.278818] pci 0000:00:1c.0: bridge window [mem 0xfba00000-0xfbafffff] [ 3.285609] pci 0000:00:1c.1: PCI bridge to [bus 06] [ 3.290578] pci 0000:00:1c.1: bridge window [io 0xc000-0xcfff] [ 3.296673] pci 0000:00:1c.1: bridge window [mem 0xfb900000-0xfb9fffff] [ 3.303463] pci 0000:00:1e.0: PCI bridge to [bus 07] [ 3.308435] pci 0000:00:1e.0: bridge window [mem 0xfb000000-0xfb8fffff] [ 3.315218] pci 0000:00:1e.0: bridge window [mem 0xf9000000-0xf9ffffff 64bit pref] [ 3.322964] pci_bus 0000:00: resource 4 [io 0x0000-0x03af window] [ 3.329147] pci_bus 0000:00: resource 5 [io 0x03e0-0x0cf7 window] [ 3.335327] pci_bus 0000:00: resource 6 [io 0x03b0-0x03df window] [ 3.341505] pci_bus 0000:00: resource 7 [io 0x0d00-0xffff window] [ 3.347685] pci_bus 0000:00: resource 8 [mem 0x000a0000-0x000dffff window] [ 3.354558] pci_bus 0000:00: resource 9 [mem 0xfed08000-0xfed08fff window] [ 3.361432] pci_bus 0000:00: resource 10 [mem 0xfed0e000-0xfed0ffff window] [ 3.368393] pci_bus 0000:00: resource 11 [mem 0x80000000-0xfbffffff window] [ 3.375353] pci_bus 0000:04: resource 0 [io 0xe000-0xefff] [ 3.380925] pci_bus 0000:04: resource 2 [mem 0xfa000000-0xfa4fffff 64bit pref] [ 3.388144] pci_bus 0000:05: resource 0 [io 0xd000-0xdfff] [ 3.393718] pci_bus 0000:05: resource 1 [mem 0xfba00000-0xfbafffff] [ 3.399986] pci_bus 0000:06: resource 0 [io 0xc000-0xcfff] [ 3.405556] pci_bus 0000:06: resource 1 [mem 0xfb900000-0xfb9fffff] [ 3.411824] pci_bus 0000:07: resource 1 [mem 0xfb000000-0xfb8fffff] [ 3.418091] pci_bus 0000:07: resource 2 [mem 0xf9000000-0xf9ffffff 64bit pref] [ 3.425310] pci_bus 0000:07: resource 4 [io 0x0000-0x03af window] [ 3.431490] pci_bus 0000:07: resource 5 [io 0x03e0-0x0cf7 window] [ 3.437669] pci_bus 0000:07: resource 6 [io 0x03b0-0x03df window] [ 3.443848] pci_bus 0000:07: resource 7 [io 0x0d00-0xffff window] [ 3.450031] pci_bus 0000:07: resource 8 [mem 0x000a0000-0x000dffff window] [ 3.456902] pci_bus 0000:07: resource 9 [mem 0xfed08000-0xfed08fff window] [ 3.463775] pci_bus 0000:07: resource 10 [mem 0xfed0e000-0xfed0ffff window] [ 3.470735] pci_bus 0000:07: resource 11 [mem 0x80000000-0xfbffffff window] [ 3.477790] pci 0000:00:05.0: disabled boot interrupts on device [8086:0e28] [ 3.509710] pci 0000:00:1a.0: quirk_usb_early_handoff+0x0/0x750 took 24268 usecs [ 3.541697] pci 0000:00:1d.0: quirk_usb_early_handoff+0x0/0x750 took 23991 usecs [ 3.549206] PCI: CLS 64 bytes, default 64 [ 3.553249] DMAR: No SATC found [ 3.553291] Trying to unpack rootfs image as initramfs... [ 3.556398] DMAR: dmar0: Using Queued invalidation [ 3.556485] pci 0000:00:00.0: Adding to iommu group 0 [ 3.571703] pci 0000:00:01.0: Adding to iommu group 1 [ 3.576783] pci 0000:00:01.1: Adding to iommu group 2 [ 3.581865] pci 0000:00:03.0: Adding to iommu group 3 [ 3.586954] pci 0000:00:04.0: Adding to iommu group 4 [ 3.592035] pci 0000:00:04.1: Adding to iommu group 5 [ 3.597114] pci 0000:00:04.2: Adding to iommu group 6 [ 3.602196] pci 0000:00:04.3: Adding to iommu group 7 [ 3.607276] pci 0000:00:04.4: Adding to iommu group 8 [ 3.612352] pci 0000:00:04.5: Adding to iommu group 9 [ 3.617433] pci 0000:00:04.6: Adding to iommu group 10 [ 3.622597] pci 0000:00:04.7: Adding to iommu group 11 [ 3.627767] pci 0000:00:05.0: Adding to iommu group 12 [ 3.632937] pci 0000:00:05.2: Adding to iommu group 13 [ 3.638102] pci 0000:00:05.4: Adding to iommu group 14 [ 3.643271] pci 0000:00:11.0: Adding to iommu group 15 [ 3.648461] pci 0000:00:16.0: Adding to iommu group 16 [ 3.653626] pci 0000:00:16.1: Adding to iommu group 16 [ 3.658797] pci 0000:00:1a.0: Adding to iommu group 17 [ 3.663975] pci 0000:00:1c.0: Adding to iommu group 18 [ 3.669148] pci 0000:00:1c.1: Adding to iommu group 19 [ 3.674316] pci 0000:00:1d.0: Adding to iommu group 20 [ 3.679481] pci 0000:00:1e.0: Adding to iommu group 21 [ 3.684692] pci 0000:00:1f.0: Adding to iommu group 22 [ 3.689859] pci 0000:00:1f.2: Adding to iommu group 22 [ 3.695022] pci 0000:00:1f.3: Adding to iommu group 22 [ 3.700191] pci 0000:00:1f.6: Adding to iommu group 22 [ 3.705359] pci 0000:04:00.0: Adding to iommu group 23 [ 3.710529] pci 0000:05:00.0: Adding to iommu group 24 [ 3.715693] pci 0000:06:00.0: Adding to iommu group 25 [ 3.720845] pci 0000:07:01.0: Adding to iommu group 21 [ 3.726034] pci 0000:ff:08.0: Adding to iommu group 26 [ 3.731211] pci 0000:ff:09.0: Adding to iommu group 27 [ 3.736417] pci 0000:ff:0a.0: Adding to iommu group 28 [ 3.741584] pci 0000:ff:0a.1: Adding to iommu group 28 [ 3.746755] pci 0000:ff:0a.2: Adding to iommu group 28 [ 3.751925] pci 0000:ff:0a.3: Adding to iommu group 28 [ 3.757113] pci 0000:ff:0b.0: Adding to iommu group 29 [ 3.762284] pci 0000:ff:0b.3: Adding to iommu group 29 [ 3.767471] pci 0000:ff:0c.0: Adding to iommu group 30 [ 3.772641] pci 0000:ff:0c.1: Adding to iommu group 30 [ 3.777831] pci 0000:ff:0d.0: Adding to iommu group 31 [ 3.782998] pci 0000:ff:0d.1: Adding to iommu group 31 [ 3.788186] pci 0000:ff:0e.0: Adding to iommu group 32 [ 3.793362] pci 0000:ff:0e.1: Adding to iommu group 32 [ 3.798529] pci 0000:ff:0f.0: Adding to iommu group 33 [ 3.803703] pci 0000:ff:0f.1: Adding to iommu group 34 [ 3.808869] pci 0000:ff:0f.2: Adding to iommu group 35 [ 3.814034] pci 0000:ff:0f.3: Adding to iommu group 36 [ 3.819200] pci 0000:ff:0f.4: Adding to iommu group 37 [ 3.824370] pci 0000:ff:0f.5: Adding to iommu group 38 [ 3.829539] pci 0000:ff:10.0: Adding to iommu group 39 [ 3.834706] pci 0000:ff:10.1: Adding to iommu group 40 [ 3.839873] pci 0000:ff:10.2: Adding to iommu group 41 [ 3.845039] pci 0000:ff:10.3: Adding to iommu group 42 [ 3.850205] pci 0000:ff:10.4: Adding to iommu group 43 [ 3.855367] pci 0000:ff:10.5: Adding to iommu group 44 [ 3.860536] pci 0000:ff:10.6: Adding to iommu group 45 [ 3.865709] pci 0000:ff:10.7: Adding to iommu group 46 [ 3.870920] pci 0000:ff:13.0: Adding to iommu group 47 [ 3.876091] pci 0000:ff:13.1: Adding to iommu group 47 [ 3.881265] pci 0000:ff:13.4: Adding to iommu group 47 [ 3.886440] pci 0000:ff:13.5: Adding to iommu group 47 [ 3.891651] pci 0000:ff:16.0: Adding to iommu group 48 [ 3.896826] pci 0000:ff:16.1: Adding to iommu group 48 [ 3.902012] pci 0000:ff:16.2: Adding to iommu group 48 [ 3.911042] DMAR: Intel(R) Virtualization Technology for Directed I/O [ 3.917495] PCI-DMA: Using software bounce buffering for IO (SWIOTLB) [ 3.923935] software IO TLB: mapped [mem 0x0000000079e2c000-0x000000007de2c000] (64MB) [ 3.932447] Initialise system trusted keyrings [ 3.936912] Key type blacklist registered [ 3.941001] workingset: timestamp_bits=36 max_order=21 bucket_order=0 [ 3.949337] zbud: loaded [ 3.952200] integrity: Platform Keyring initialized [ 3.957090] integrity: Machine keyring initialized [ 3.961885] Key type asymmetric registered [ 3.965983] Asymmetric key parser 'x509' registered [ 3.997987] Freeing initrd memory: 39592K [ 4.009313] alg: self-tests for CTR-KDF (hmac(sha256)) passed [ 4.015104] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 248) [ 4.022557] io scheduler mq-deadline registered [ 4.029507] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4 [ 4.036330] Monitor-Mwait will be used to enter C-1 state [ 4.036344] Monitor-Mwait will be used to enter C-2 state [ 4.036350] ACPI: \_SB_.SCK0.C000: Found 2 idle states [ 4.046414] ERST: Error Record Serialization Table (ERST) support is initialized. [ 4.053909] pstore: Registered erst as persistent store backend [ 4.059989] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled [ 4.066422] 00:07: ttyS0 at I/O 0x3f8 (irq = 4, base_baud = 115200) is a 16550A [ 4.074518] 00:08: ttyS1 at I/O 0x2f8 (irq = 3, base_baud = 115200) is a 16550A [ 4.082757] Linux agpgart interface v0.103 [ 4.086988] AMD-Vi: AMD IOMMUv2 functionality not available on this system - This is not a bug. [ 4.096123] i8042: PNP: PS/2 Controller [PNP0f03:PS2M] at 0x60,0x64 irq 12 [ 4.103005] i8042: PNP: PS/2 controller doesn't have KBD irq; using default 1 [ 4.112872] serio: i8042 KBD port at 0x60,0x64 irq 1 [ 4.117851] serio: i8042 AUX port at 0x60,0x64 irq 12 [ 4.123097] mousedev: PS/2 mouse device common for all mice [ 4.128708] rtc_cmos 00:02: RTC can wake from S4 [ 4.133638] rtc_cmos 00:02: registered as rtc0 [ 4.138124] rtc_cmos 00:02: setting system clock to 2024-06-26T13:21:47 UTC (1719408107) [ 4.146252] rtc_cmos 00:02: alarms up to one month, y3k, 114 bytes nvram, hpet irqs [ 4.154080] intel_pstate: Intel P-state driver initializing [ 4.159928] ledtrig-cpu: registered to indicate activity on CPUs [ 4.183597] NET: Registered PF_INET6 protocol family [ 4.196797] Segment Routing with IPv6 [ 4.200488] In-situ OAM (IOAM) with IPv6 [ 4.204454] mip6: Mobile IPv6 [ 4.207433] NET: Registered PF_PACKET protocol family [ 4.212596] mpls_gso: MPLS GSO support [ 4.216864] microcode: sig=0x306e4, pf=0x8, revision=0x42e [ 4.222402] microcode: Microcode Update Driver: v2.2. [ 4.222411] IPI shorthand broadcast: enabled [ 4.231780] sched_clock: Marking stable (3242152338, 989593882)->(4640116692, -408370472) [ 4.240208] registered taskstats version 1 [ 4.244323] Loading compiled-in X.509 certificates [ 4.288982] Loaded X.509 cert 'Debian Secure Boot CA: 6ccece7e4c6c0d1f6149f3dd27dfcc5cbb419ea1' [ 4.297711] Loaded X.509 cert 'Debian Secure Boot Signer 2022 - linux: 14011249c2675ea8e5148542202005810584b25f' [ 4.308374] zswap: loaded using pool lzo/zbud [ 4.312953] Key type .fscrypt registered [ 4.316881] Key type fscrypt-provisioning registered [ 4.322172] pstore: Using crash dump compression: deflate [ 4.335152] Key type encrypted registered [ 4.339192] AppArmor: AppArmor sha1 policy hashing enabled [ 4.344688] ima: No TPM chip found, activating TPM-bypass! [ 4.350172] ima: Allocated hash algorithm: sha256 [ 4.354889] ima: No architecture policies found [ 4.359439] evm: Initialising EVM extended attributes: [ 4.364576] evm: security.selinux [ 4.367895] evm: security.SMACK64 (disabled) [ 4.372167] evm: security.SMACK64EXEC (disabled) [ 4.376787] evm: security.SMACK64TRANSMUTE (disabled) [ 4.381840] evm: security.SMACK64MMAP (disabled) [ 4.386460] evm: security.apparmor [ 4.389864] evm: security.ima [ 4.392835] evm: security.capability [ 4.396410] evm: HMAC attrs: 0x1 [ 4.578913] clk: Disabling unused clocks [ 4.584524] Freeing unused decrypted memory: 2036K [ 4.590005] Freeing unused kernel image (initmem) memory: 2796K [ 4.596001] Write protecting the kernel read-only data: 26624k [ 4.602531] Freeing unused kernel image (text/rodata gap) memory: 2040K [ 4.609480] Freeing unused kernel image (rodata/data gap) memory: 1180K [ 4.702116] x86/mm: Checked W+X mappings: passed, no W+X pages found. [ 4.708558] x86/mm: Checking user space page tables [ 4.788314] x86/mm: Checked W+X mappings: passed, no W+X pages found. [ 4.794760] Run /init as init process [ 4.798429] with arguments: [ 4.798431] /init [ 4.798432] with environment: [ 4.798434] HOME=/ [ 4.798435] TERM=linux [ 4.798436] BOOT_IMAGE=/vmlinuz-6.1.0-21-amd64 [ 4.961617] tsc: Refined TSC clocksource calibration: 1799.999 MHz [ 4.967812] clocksource: tsc: mask: 0xffffffffffffffff max_cycles: 0x19f228ab7a2, max_idle_ns: 440795289252 ns [ 4.978316] clocksource: Switched to clocksource tsc [ 5.020056] SCSI subsystem initialized [ 5.031180] ACPI: bus type USB registered [ 5.035239] usbcore: registered new interface driver usbfs [ 5.035455] e1000e: Intel(R) PRO/1000 Network Driver [ 5.045701] e1000e: Copyright(c) 1999 - 2015 Intel Corporation. [ 5.052648] e1000e 0000:05:00.0: Interrupt Throttling Rate (ints/sec) set to dynamic conservative mode [ 5.062920] usbcore: registered new interface driver hub [ 5.068260] usbcore: registered new device driver usb [ 5.082509] i801_smbus 0000:00:1f.3: SMBus using PCI interrupt [ 5.090170] i2c i2c-0: 1/6 memory slots populated (from DMI) [ 5.095841] i2c i2c-0: Systems with more than 4 memory slots not supported yet, not instantiating SPD [ 5.107820] libata version 3.00 loaded. [ 5.109437] ehci-pci 0000:00:1a.0: EHCI Host Controller [ 5.115277] ehci-pci 0000:00:1a.0: new USB bus registered, assigned bus number 1 [ 5.122701] e1000e 0000:05:00.0 0000:05:00.0 (uninitialized): registered PHC clock [ 5.130306] ehci-pci 0000:00:1a.0: debug port 2 [ 5.138870] ehci-pci 0000:00:1a.0: irq 16, io mem 0xfbb23000 [ 5.144915] ahci 0000:00:1f.2: version 3.0 [ 5.155196] ahci 0000:00:1f.2: AHCI 0001.0300 32 slots 6 ports 6 Gbps 0x3f impl SATA mode [ 5.163393] ahci 0000:00:1f.2: flags: 64bit ncq sntf pm led clo pio slum part ems apst [ 5.165616] ehci-pci 0000:00:1a.0: USB 2.0 started, EHCI 1.00 [ 5.177213] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 6.01 [ 5.185479] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 5.185926] e1000e 0000:05:00.0 eth0: (PCI Express:2.5GT/s:Width x1) 00:25:90:eb:25:a6 [ 5.192706] usb usb1: Product: EHCI Host Controller [ 5.192708] usb usb1: Manufacturer: Linux 6.1.0-21-amd64 ehci_hcd [ 5.192710] usb usb1: SerialNumber: 0000:00:1a.0 [ 5.200626] e1000e 0000:05:00.0 eth0: Intel(R) PRO/1000 Network Connection [ 5.205712] hub 1-0:1.0: USB hub found [ 5.211678] e1000e 0000:05:00.0 eth0: MAC: 3, PHY: 8, PBA No: FFFFFF-0FF [ 5.216227] hub 1-0:1.0: 2 ports detected [ 5.223349] e1000e 0000:06:00.0: Interrupt Throttling Rate (ints/sec) set to dynamic conservative mode [ 5.227191] ehci-pci 0000:00:1d.0: EHCI Host Controller [ 5.231014] scsi host0: ahci [ 5.231524] scsi host1: ahci [ 5.231961] scsi host2: ahci [ 5.232396] scsi host3: ahci [ 5.232824] scsi host4: ahci [ 5.233243] scsi host5: ahci [ 5.233308] ata1: SATA max UDMA/133 abar m2048@0xfbb21000 port 0xfbb21100 irq 32 [ 5.233313] ata2: SATA max UDMA/133 abar m2048@0xfbb21000 port 0xfbb21180 irq 32 [ 5.233316] ata3: SATA max UDMA/133 abar m2048@0xfbb21000 port 0xfbb21200 irq 32 [ 5.233318] ata4: SATA max UDMA/133 abar m2048@0xfbb21000 port 0xfbb21280 irq 32 [ 5.233321] ata5: SATA max UDMA/133 abar m2048@0xfbb21000 port 0xfbb21300 irq 32 [ 5.233323] ata6: SATA max UDMA/133 abar m2048@0xfbb21000 port 0xfbb21380 irq 32 [ 5.291798] e1000e 0000:06:00.0 0000:06:00.0 (uninitialized): registered PHC clock [ 5.299024] ehci-pci 0000:00:1d.0: new USB bus registered, assigned bus number 2 [ 5.314178] isci: Intel(R) C600 SAS Controller Driver - version 1.2.0 [ 5.321367] ehci-pci 0000:00:1d.0: debug port 2 [ 5.328762] isci 0000:04:00.0: driver configured for rev: 6 silicon [ 5.339153] ehci-pci 0000:00:1d.0: irq 23, io mem 0xfbb22000 [ 5.357953] isci 0000:04:00.0: OEM parameter table found in OROM [ 5.362972] e1000e 0000:06:00.0 eth1: (PCI Express:2.5GT/s:Width x1) 00:25:90:eb:25:a7 [ 5.363966] isci 0000:04:00.0: OEM SAS parameters (version: 1.0) loaded (platform) [ 5.371884] e1000e 0000:06:00.0 eth1: Intel(R) PRO/1000 Network Connection [ 5.373620] ehci-pci 0000:00:1d.0: USB 2.0 started, EHCI 1.00 [ 5.373683] usb usb2: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 6.01 [ 5.373686] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 5.373689] usb usb2: Product: EHCI Host Controller [ 5.373691] usb usb2: Manufacturer: Linux 6.1.0-21-amd64 ehci_hcd [ 5.373692] usb usb2: SerialNumber: 0000:00:1d.0 [ 5.373876] hub 2-0:1.0: USB hub found [ 5.373885] hub 2-0:1.0: 2 ports detected [ 5.386490] isci 0000:04:00.0: SCU controller 0: phy 3-0 cables: {short, short, short, short} [ 5.392145] e1000e 0000:06:00.0 eth1: MAC: 3, PHY: 8, PBA No: FFFFFF-0FF [ 5.403094] scsi host6: isci [ 5.537660] usb 1-1: new high-speed USB device number 2 using ehci-pci [ 5.552416] ata2: SATA link down (SStatus 0 SControl 300) [ 5.557859] ata3: SATA link down (SStatus 0 SControl 300) [ 5.563287] ata1: SATA link up 6.0 Gbps (SStatus 133 SControl 300) [ 5.569495] ata4: SATA link down (SStatus 0 SControl 300) [ 5.575012] ata1.00: ATA-8: WDC WD1003FBYZ-010FB0, 01.01V03, max UDMA/133 [ 5.581820] ata5: SATA link down (SStatus 0 SControl 300) [ 5.587258] ata6: SATA link down (SStatus 0 SControl 300) [ 5.592950] ata1.00: 1953525168 sectors, multi 16: LBA48 NCQ (depth 32), AA [ 5.601928] ata1.00: configured for UDMA/133 [ 5.606268] scsi: waiting for bus probes to complete ... [ 5.629647] usb 2-1: new high-speed USB device number 2 using ehci-pci [ 5.698326] usb 1-1: New USB device found, idVendor=8087, idProduct=0024, bcdDevice= 0.00 [ 5.706526] usb 1-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0 [ 5.714789] hub 1-1:1.0: USB hub found [ 5.718739] hub 1-1:1.0: 6 ports detected [ 5.802229] usb 2-1: New USB device found, idVendor=8087, idProduct=0024, bcdDevice= 0.00 [ 5.810423] usb 2-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0 [ 5.818290] hub 2-1:1.0: USB hub found [ 5.822263] hub 2-1:1.0: 8 ports detected [ 5.877872] scsi 0:0:0:0: Direct-Access ATA WDC WD1003FBYZ-0 1V03 PQ: 0 ANSI: 5 [ 5.888948] e1000e 0000:05:00.0 enx002590eb25a6: renamed from eth0 [ 5.912757] sd 0:0:0:0: [sda] 1953525168 512-byte logical blocks: (1.00 TB/932 GiB) [ 5.920443] sd 0:0:0:0: [sda] Write Protect is off [ 5.925240] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00 [ 5.925261] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 5.934391] sd 0:0:0:0: [sda] Preferred minimum I/O size 512 bytes [ 5.934763] e1000e 0000:06:00.0 enx002590eb25a7: renamed from eth1 [ 5.971921] sda: sda1 sda2 < sda5 > [ 5.975795] sd 0:0:0:0: [sda] Attached SCSI disk [ 6.013650] usb 1-1.1: new full-speed USB device number 3 using ehci-pci [ 6.127587] usb 1-1.1: New USB device found, idVendor=0557, idProduct=2221, bcdDevice= 0.01 [ 6.135974] usb 1-1.1: New USB device strings: Mfr=1, Product=2, SerialNumber=0 [ 6.143316] usb 1-1.1: Product: Hermon USB hidmouse Device [ 6.148810] usb 1-1.1: Manufacturer: Winbond Electronics Corp [ 6.169742] hid: raw HID events driver (C) Jiri Kosina [ 6.182617] usbcore: registered new interface driver usbhid [ 6.188211] usbhid: USB HID core driver [ 6.194605] input: Winbond Electronics Corp Hermon USB hidmouse Device as /devices/pci0000:00/0000:00:1a.0/usb1/1-1/1-1.1/1-1.1:1.0/0003:0557:2221.0001/input/input3 [ 6.209495] hid-generic 0003:0557:2221.0001: input,hidraw0: USB HID v1.00 Mouse [Winbond Electronics Corp Hermon USB hidmouse Device] on usb-0000:00:1a.0-1.1/input0 [ 6.224388] input: Winbond Electronics Corp Hermon USB hidmouse Device as /devices/pci0000:00/0000:00:1a.0/usb1/1-1/1-1.1/1-1.1:1.1/0003:0557:2221.0002/input/input4 [ 6.297917] hid-generic 0003:0557:2221.0002: input,hidraw1: USB HID v1.00 Keyboard [Winbond Electronics Corp Hermon USB hidmouse Device] on usb-0000:00:1a.0-1.1/input1 [ 6.316492] device-mapper: core: CONFIG_IMA_DISABLE_HTABLE is disabled. Duplicate IMA measurements will not be recorded in the IMA log. [ 6.328724] device-mapper: uevent: version 1.0.3 [ 6.333453] device-mapper: ioctl: 4.47.0-ioctl (2022-07-28) initialised: dm-devel@redhat.com [ 6.942974] PM: Image not found (code -22) [ 7.297389] EXT4-fs (dm-0): mounting ext3 file system using the ext4 subsystem [ 7.308813] EXT4-fs (dm-0): mounted filesystem with ordered data mode. Quota mode: none. [ 7.490405] Not activating Mandatory Access Control as /sbin/tomoyo-init does not exist. [ 9.120410] input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input5 [ 9.145657] ACPI: button: Power Button [PWRB] [ 9.150119] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input6 [ 9.157743] ACPI: button: Power Button [PWRF] [ 9.210992] dca service started, version 1.12.1 [ 9.391215] sd 0:0:0:0: Attached scsi generic sg0 type 0 [ 9.411413] ioatdma: Intel(R) QuickData Technology Driver 5.00 [ 9.468445] input: PC Speaker as /devices/platform/pcspkr/input/input7 [ 9.494044] iTCO_vendor_support: vendor-support=0 [ 9.596301] iTCO_wdt iTCO_wdt.1.auto: unable to reset NO_REBOOT flag, device disabled by hardware/BIOS [ 9.625654] mei_me 0000:00:16.0: Device doesn't have valid ME Interface [ 9.635296] IPMI message handler: version 39.2 [ 9.657023] ipmi device interface [ 9.710163] RAPL PMU: API unit is 2^-32 Joules, 3 fixed counters, 163840 ms ovfl timer [ 9.718093] RAPL PMU: hw unit of domain pp0-core 2^-16 Joules [ 9.723847] RAPL PMU: hw unit of domain package 2^-16 Joules [ 9.729511] RAPL PMU: hw unit of domain dram 2^-16 Joules [ 9.774478] cryptd: max_cpu_qlen set to 1000 [ 9.778801] ACPI: bus type drm_connector registered [ 9.790213] ipmi_si: IPMI System Interface driver [ 9.794951] ipmi_si dmi-ipmi-si.0: ipmi_platform: probing via SMBIOS [ 9.801306] ipmi_platform: ipmi_si: SMBIOS: io 0xca2 regsize 1 spacing 1 irq 0 [ 9.808523] ipmi_si: Adding SMBIOS-specified kcs state machine [ 9.814419] ipmi_si IPI0001:00: ipmi_platform: probing via ACPI [ 9.820444] ipmi_si IPI0001:00: ipmi_platform: [io 0x0ca2] regsize 1 spacing 1 irq 0 [ 9.852620] ipmi_si dmi-ipmi-si.0: Removing SMBIOS-specified kcs state machine in favor of ACPI [ 9.861320] ipmi_si: Adding ACPI-specified kcs state machine [ 9.867060] ipmi_si: Trying ACPI-specified kcs state machine at i/o address 0xca2, slave address 0x0, irq 0 [ 9.877385] mgag200 0000:07:01.0: vgaarb: deactivate vga console [ 9.888369] Console: switching to colour dummy device 80x25 [ 9.894330] AVX version of gcm_enc/dec engaged. [ 9.898957] AES CTR mode by8 optimization enabled [ 9.901747] [drm] Initialized mgag200 1.0.0 20110418 for 0000:07:01.0 on minor 0 [ 9.912970] fbcon: mgag200drmfb (fb0) is primary device [ 9.973639] ipmi_si IPI0001:00: The BMC does not support clearing the recv irq bit, compensating, but the BMC needs to be fixed. [ 10.056018] ipmi_si IPI0001:00: IPMI message handler: Found new BMC (man_id: 0x002a7c, prod_id: 0x0703, dev_id: 0x20) [ 10.095208] ipmi_si IPI0001:00: IPMI kcs interface initialized [ 10.142659] ipmi_ssif: IPMI SSIF Interface driver [ 10.287484] Console: switching to colour frame buffer device 128x48 [ 10.400487] mgag200 0000:07:01.0: [drm] fb0: mgag200drmfb frame buffer device [ 10.723806] EDAC sbridge: Seeking for: PCI ID 8086:0ea0 [ 10.723834] EDAC sbridge: Seeking for: PCI ID 8086:0ea0 [ 10.723841] EDAC sbridge: Seeking for: PCI ID 8086:0e60 [ 10.723849] EDAC sbridge: Seeking for: PCI ID 8086:0ea8 [ 10.723857] EDAC sbridge: Seeking for: PCI ID 8086:0ea8 [ 10.723861] EDAC sbridge: Seeking for: PCI ID 8086:0e71 [ 10.723869] EDAC sbridge: Seeking for: PCI ID 8086:0e71 [ 10.723873] EDAC sbridge: Seeking for: PCI ID 8086:0eaa [ 10.723881] EDAC sbridge: Seeking for: PCI ID 8086:0eaa [ 10.723885] EDAC sbridge: Seeking for: PCI ID 8086:0eab [ 10.723893] EDAC sbridge: Seeking for: PCI ID 8086:0eab [ 10.723897] EDAC sbridge: Seeking for: PCI ID 8086:0eac [ 10.723905] EDAC sbridge: Seeking for: PCI ID 8086:0eac [ 10.723909] EDAC sbridge: Seeking for: PCI ID 8086:0ead [ 10.723917] EDAC sbridge: Seeking for: PCI ID 8086:0ead [ 10.723920] EDAC sbridge: Seeking for: PCI ID 8086:0e68 [ 10.723928] EDAC sbridge: Seeking for: PCI ID 8086:0e79 [ 10.723936] EDAC sbridge: Seeking for: PCI ID 8086:0e6a [ 10.723943] EDAC sbridge: Seeking for: PCI ID 8086:0e6b [ 10.723951] EDAC sbridge: Seeking for: PCI ID 8086:0e6c [ 10.723958] EDAC sbridge: Seeking for: PCI ID 8086:0e6d [ 10.723966] EDAC sbridge: Seeking for: PCI ID 8086:0eb8 [ 10.723973] EDAC sbridge: Seeking for: PCI ID 8086:0ebc [ 10.723981] EDAC sbridge: Seeking for: PCI ID 8086:0ec8 [ 10.723991] EDAC sbridge: Seeking for: PCI ID 8086:0ec8 [ 10.723993] EDAC sbridge: Seeking for: PCI ID 8086:0ec9 [ 10.724002] EDAC sbridge: Seeking for: PCI ID 8086:0ec9 [ 10.724004] EDAC sbridge: Seeking for: PCI ID 8086:0eca [ 10.724014] EDAC sbridge: Seeking for: PCI ID 8086:0eca [ 10.724154] EDAC MC0: Giving out device to module sb_edac controller Ivy Bridge SrcID#0_Ha#0: DEV 0000:ff:0e.0 (INTERRUPT) [ 10.735209] EDAC sbridge: Ver: 1.1.2 [ 10.872440] intel_rapl_common: Found RAPL domain package [ 10.877779] intel_rapl_common: Found RAPL domain core [ 10.882841] intel_rapl_common: Found RAPL domain dram [ 11.864469] EXT4-fs (dm-0): re-mounted. Quota mode: none. [ 12.592566] EXT4-fs (sda1): mounting ext3 file system using the ext4 subsystem [ 12.622308] EXT4-fs (sda1): mounted filesystem with ordered data mode. Quota mode: none. [ 12.670617] Adding 1949692k swap on /dev/mapper/fiano1--vg-swap_1. Priority:-2 extents:1 across:1949692k FS [ 13.210037] audit: type=1400 audit(1719408116.772:2): apparmor="STATUS" operation="profile_load" profile="unconfined" name="nvidia_modprobe" pid=1067 comm="apparmor_parser" [ 13.225421] audit: type=1400 audit(1719408116.772:3): apparmor="STATUS" operation="profile_load" profile="unconfined" name="nvidia_modprobe//kmod" pid=1067 comm="apparmor_parser" [ 13.241307] audit: type=1400 audit(1719408116.776:4): apparmor="STATUS" operation="profile_load" profile="unconfined" name="lsb_release" pid=1066 comm="apparmor_parser" [ 13.273323] audit: type=1400 audit(1719408116.832:5): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/bin/man" pid=1069 comm="apparmor_parser" [ 13.288444] audit: type=1400 audit(1719408116.836:6): apparmor="STATUS" operation="profile_load" profile="unconfined" name="man_filter" pid=1069 comm="apparmor_parser" [ 13.303379] audit: type=1400 audit(1719408116.836:7): apparmor="STATUS" operation="profile_load" profile="unconfined" name="man_groff" pid=1069 comm="apparmor_parser" [ 13.481894] audit: type=1400 audit(1719408117.044:8): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=1068 comm="apparmor_parser" [ 13.499883] audit: type=1400 audit(1719408117.044:9): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/NetworkManager/nm-dhcp-helper" pid=1068 comm="apparmor_parser" [ 13.517243] audit: type=1400 audit(1719408117.048:10): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/connman/scripts/dhclient-script" pid=1068 comm="apparmor_parser" [ 13.534864] audit: type=1400 audit(1719408117.092:11): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/sbin/ntpd" pid=1073 comm="apparmor_parser" [ 17.022692] e1000e 0000:05:00.0 enx002590eb25a6: NIC Link is Up 1000 Mbps Full Duplex, Flow Control: None [ 17.032607] IPv6: ADDRCONF(NETDEV_CHANGE): enx002590eb25a6: link becomes ready