[ 0.000000] Linux version 6.1.95+ (osstest@godello0) (gcc (Debian 12.2.0-14) 12.2.0, GNU ld (GNU Binutils for Debian) 2.40) #1 SMP PREEMPT_DYNAMIC Wed Jun 26 13:06:55 UTC 2024 [ 0.000000] Command line: placeholder root=/dev/mapper/italia0--vg-root ro console=hvc0 [ 0.000000] Released 0 page(s) [ 0.000000] BIOS-provided physical RAM map: [ 0.000000] Xen: [mem 0x0000000000000000-0x000000000009afff] usable [ 0.000000] Xen: [mem 0x000000000009bc00-0x00000000000fffff] reserved [ 0.000000] Xen: [mem 0x0000000000100000-0x0000000020064fff] usable [ 0.000000] Xen: [mem 0x00000000ab9ba000-0x00000000bba3afff] ACPI NVS [ 0.000000] Xen: [mem 0x00000000bc60a000-0x00000000bc73ffff] reserved [ 0.000000] Xen: [mem 0x00000000beaee000-0x00000000beaf8fff] reserved [ 0.000000] Xen: [mem 0x00000000beb05000-0x00000000beb15fff] reserved [ 0.000000] Xen: [mem 0x00000000bed3a000-0x00000000beddffff] reserved [ 0.000000] Xen: [mem 0x00000000bede0000-0x00000000befdffff] ACPI NVS [ 0.000000] Xen: [mem 0x00000000befe0000-0x00000000beffefff] ACPI data [ 0.000000] Xen: [mem 0x00000000bf000000-0x00000000bfffffff] reserved [ 0.000000] Xen: [mem 0x00000000f8000000-0x00000000fbffffff] reserved [ 0.000000] Xen: [mem 0x00000000fec00000-0x00000000fec00fff] reserved [ 0.000000] Xen: [mem 0x00000000fed19000-0x00000000fed19fff] reserved [ 0.000000] Xen: [mem 0x00000000fed1c000-0x00000000fed1ffff] reserved [ 0.000000] Xen: [mem 0x00000000fed90000-0x00000000fed90fff] reserved [ 0.000000] Xen: [mem 0x00000000fee00000-0x00000000feefffff] reserved [ 0.000000] Xen: [mem 0x00000000ffa00000-0x00000000ffffffff] reserved [ 0.000000] NX (Execute Disable) protection: active [ 0.000000] SMBIOS 2.6 present. [ 0.000000] DMI: Intel Corporation SandyBridge Platform/To be filled by O.E.M., BIOS S1200BT.86B.02.00.0042.050820141549 05/08/2014 [ 0.000000] Hypervisor detected: Xen PV [ 0.000461] tsc: Detected 3092.976 MHz processor [ 0.000868] e820: update [mem 0x00000000-0x00000fff] usable ==> reserved [ 0.000870] e820: remove [mem 0x000a0000-0x000fffff] usable [ 0.000877] last_pfn = 0x20065 max_arch_pfn = 0x400000000 [ 0.000878] Disabled [ 0.000879] x86/PAT: MTRRs disabled, skipping PAT initialization too. [ 0.000883] x86/PAT: Configuration [0-7]: WB WT UC- UC WC WP UC UC [ 0.000917] Kernel/User page tables isolation: disabled on XEN PV. [ 0.025356] RAMDISK: [mem 0x04000000-0x0536afff] [ 0.025363] ACPI: Early table checksum verification disabled [ 0.034907] ACPI: RSDP 0x00000000000F0410 000024 (v02 INTEL ) [ 0.034917] ACPI: XSDT 0x00000000BEFFDE18 0000BC (v01 INTEL S1200BTS 06222004 INTL 20090903) [ 0.034950] ACPI: FACP 0x00000000BEFFCA98 0000F4 (v04 INTEL S1200BTS 06222004 INTL 20090903) [ 0.034989] ACPI: DSDT 0x00000000BEFEE018 00CE48 (v02 INTEL S1200BTS 00000000 INTL 20100331) [ 0.035005] ACPI: FACS 0x00000000BEFFDD40 000040 [ 0.035020] ACPI: APIC 0x00000000BEFFB018 000652 (v03 INTEL S1200BTS 06222004 INTL 20090903) [ 0.035035] ACPI: SPMI 0x00000000BEFFEC18 000040 (v05 INTEL S1200BTS 06222004 INTL 20090903) [ 0.035051] ACPI: MCFG 0x00000000BEFFEB98 00003C (v01 INTEL S1200BTS 06222004 INTL 20090903) [ 0.035066] ACPI: WDDT 0x00000000BEFFEF18 000040 (v01 INTEL S1200BTS 06222004 INTL 20090903) [ 0.035081] ACPI: HPET 0x00000000BEFFEE98 000038 (v01 INTEL S1200BTS 06222004 INTL 20090903) [ 0.035097] ACPI: SSDT 0x00000000BEFEB018 0010A8 (v02 INTEL S1200BTS 00001000 INTL 20100331) [ 0.035112] ACPI: BOOT 0x00000000BEFFEE18 000028 (v01 INTEL S1200BTS 06222004 INTL 20090903) [ 0.035127] ACPI: SSDT 0x00000000BEFE7698 0005E0 (v02 INTEL S1200BTS 00003000 INTL 20100331) [ 0.035143] ACPI: SSDT 0x00000000BEFE6018 000A92 (v02 INTEL S1200BTS 00003000 INTL 20100331) [ 0.035158] ACPI: SSDT 0x00000000BEFEA598 00054D (v01 INTEL S1200BTS 00001000 INTL 20100331) [ 0.035173] ACPI: SSDT 0x00000000BEFFDB18 000069 (v01 INTEL S1200BTS 00001000 INTL 20100331) [ 0.035189] ACPI: SSDT 0x00000000BEFE9E18 00017B (v02 INTEL S1200BTS 00002000 INTL 20100331) [ 0.035204] ACPI: RMAD 0x00000000BEFE8F18 000078 (v01 INTEL S1200BTS 00000001 INTL 00000001) [ 0.035219] ACPI: SPCR 0x00000000BEFFED98 000050 (v01 INTEL S1200BTS 06222004 INTL 20090903) [ 0.035235] ACPI: HEST 0x00000000BEFFCF18 0000A8 (v01 INTEL S1200BTS 00000001 INTL 00000001) [ 0.035250] ACPI: BERT 0x00000000BEFFED18 000030 (v01 INTEL S1200BTS 00000001 INTL 00000001) [ 0.035265] ACPI: ERST 0x00000000BEFE8C98 000230 (v01 INTEL S1200BTS 00000001 INTL 00000001) [ 0.035281] ACPI: EINJ 0x00000000BEFFC918 000130 (v01 INTEL S1200BTS 00000001 INTL 00000001) [ 0.035289] ACPI: Reserving FACP table memory at [mem 0xbeffca98-0xbeffcb8b] [ 0.035291] ACPI: Reserving DSDT table memory at [mem 0xbefee018-0xbeffae5f] [ 0.035292] ACPI: Reserving FACS table memory at [mem 0xbeffdd40-0xbeffdd7f] [ 0.035292] ACPI: Reserving APIC table memory at [mem 0xbeffb018-0xbeffb669] [ 0.035293] ACPI: Reserving SPMI table memory at [mem 0xbeffec18-0xbeffec57] [ 0.035294] ACPI: Reserving MCFG table memory at [mem 0xbeffeb98-0xbeffebd3] [ 0.035295] ACPI: Reserving WDDT table memory at [mem 0xbeffef18-0xbeffef57] [ 0.035295] ACPI: Reserving HPET table memory at [mem 0xbeffee98-0xbeffeecf] [ 0.035296] ACPI: Reserving SSDT table memory at [mem 0xbefeb018-0xbefec0bf] [ 0.035297] ACPI: Reserving BOOT table memory at [mem 0xbeffee18-0xbeffee3f] [ 0.035298] ACPI: Reserving SSDT table memory at [mem 0xbefe7698-0xbefe7c77] [ 0.035298] ACPI: Reserving SSDT table memory at [mem 0xbefe6018-0xbefe6aa9] [ 0.035299] ACPI: Reserving SSDT table memory at [mem 0xbefea598-0xbefeaae4] [ 0.035300] ACPI: Reserving SSDT table memory at [mem 0xbeffdb18-0xbeffdb80] [ 0.035301] ACPI: Reserving SSDT table memory at [mem 0xbefe9e18-0xbefe9f92] [ 0.035302] ACPI: Reserving RMAD table memory at [mem 0xbefe8f18-0xbefe8f8f] [ 0.035302] ACPI: Reserving SPCR table memory at [mem 0xbeffed98-0xbeffede7] [ 0.035303] ACPI: Reserving HEST table memory at [mem 0xbeffcf18-0xbeffcfbf] [ 0.035304] ACPI: Reserving BERT table memory at [mem 0xbeffed18-0xbeffed47] [ 0.035305] ACPI: Reserving ERST table memory at [mem 0xbefe8c98-0xbefe8ec7] [ 0.035306] ACPI: Reserving EINJ table memory at [mem 0xbeffc918-0xbeffca47] [ 0.035355] Setting APIC routing to Xen PV. [ 0.039757] Zone ranges: [ 0.039758] DMA [mem 0x0000000000001000-0x0000000000ffffff] [ 0.039760] DMA32 [mem 0x0000000001000000-0x0000000020064fff] [ 0.039761] Normal empty [ 0.039762] Movable zone start for each node [ 0.039762] Early memory node ranges [ 0.039763] node 0: [mem 0x0000000000001000-0x000000000009afff] [ 0.039764] node 0: [mem 0x0000000000100000-0x0000000020064fff] [ 0.039765] Initmem setup node 0 [mem 0x0000000000001000-0x0000000020064fff] [ 0.039770] On node 0, zone DMA: 1 pages in unavailable ranges [ 0.039804] On node 0, zone DMA: 101 pages in unavailable ranges [ 0.041604] On node 0, zone DMA32: 32667 pages in unavailable ranges [ 0.041609] p2m virtual area at (____ptrval____), size is 40000000 [ 0.221261] Remapped 101 page(s) [ 0.221936] ACPI: PM-Timer IO Port: 0x408 [ 0.222076] ACPI: LAPIC_NMI (acpi_id[0xff] dfl dfl lint[0x1]) [ 0.222121] IOAPIC[0]: apic_id 2, version 32, address 0xfec00000, GSI 0-23 [ 0.222148] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl) [ 0.222151] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level) [ 0.222203] ACPI: Using ACPI (MADT) for SMP configuration information [ 0.222208] ACPI: HPET id: 0x8086a701 base: 0xfed00000 [ 0.222218] ACPI: SPCR: SPCR table version 1 [ 0.222220] ACPI: SPCR: console: uart,io,0x3f8,115200 [ 0.222282] smpboot: Allowing 4 CPUs, 0 hotplug CPUs [ 0.222299] PM: hibernation: Registered nosave memory: [mem 0x00000000-0x00000fff] [ 0.222301] PM: hibernation: Registered nosave memory: [mem 0x0009b000-0x0009bfff] [ 0.222302] PM: hibernation: Registered nosave memory: [mem 0x0009c000-0x000fffff] [ 0.222303] [mem 0x20065000-0xab9b9fff] available for PCI devices [ 0.222307] Booting kernel on Xen [ 0.222308] Xen version: 4.18.3-pre (preserve-AD) [ 0.222310] clocksource: refined-jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 1910969940391419 ns [ 0.226933] setup_percpu: NR_CPUS:64 nr_cpumask_bits:4 nr_cpu_ids:4 nr_node_ids:1 [ 0.227159] percpu: Embedded 54 pages/cpu s180520 r8192 d32472 u524288 [ 0.227164] pcpu-alloc: s180520 r8192 d32472 u524288 alloc=1*2097152 [ 0.227167] pcpu-alloc: [0] 0 1 2 3 [ 0.227223] xen: PV spinlocks enabled [ 0.227226] PV qspinlock hash table entries: 256 (order: 0, 4096 bytes, linear) [ 0.227230] Built 1 zonelists, mobility grouping on. Total pages: 129006 [ 0.227231] Kernel command line: placeholder root=/dev/mapper/italia0--vg-root ro console=hvc0 [ 0.227266] Unknown kernel command line parameters "placeholder", will be passed to user space. [ 0.227308] Dentry cache hash table entries: 65536 (order: 7, 524288 bytes, linear) [ 0.227327] Inode-cache hash table entries: 32768 (order: 6, 262144 bytes, linear) [ 0.228001] mem auto-init: stack:all(zero), heap alloc:off, heap free:off [ 0.228003] software IO TLB: area num 4. [ 0.283399] Memory: 390892K/524284K available (14349K kernel code, 2682K rwdata, 4576K rodata, 1576K init, 1296K bss, 133140K reserved, 0K cma-reserved) [ 0.283573] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1 [ 0.285624] Dynamic Preempt: voluntary [ 0.285708] rcu: Preemptible hierarchical RCU implementation. [ 0.285708] rcu: RCU event tracing is enabled. [ 0.285709] rcu: RCU restricting CPUs from NR_CPUS=64 to nr_cpu_ids=4. [ 0.285710] Trampoline variant of Tasks RCU enabled. [ 0.285711] rcu: RCU calculated value of scheduler-enlistment delay is 100 jiffies. [ 0.285712] rcu: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=4 [ 0.296287] NR_IRQS: 4352, nr_irqs: 456, preallocated irqs: 16 [ 0.296402] xen:events: Using FIFO-based ABI [ 0.296426] xen: --> pirq=1 -> irq=1 (gsi=1) [ 0.296435] xen: --> pirq=2 -> irq=2 (gsi=2) [ 0.296443] xen: --> pirq=3 -> irq=3 (gsi=3) [ 0.296451] xen: --> pirq=4 -> irq=4 (gsi=4) [ 0.296459] xen: --> pirq=5 -> irq=5 (gsi=5) [ 0.296467] xen: --> pirq=6 -> irq=6 (gsi=6) [ 0.296475] xen: --> pirq=7 -> irq=7 (gsi=7) [ 0.296483] xen: --> pirq=8 -> irq=8 (gsi=8) [ 0.296491] xen: --> pirq=9 -> irq=9 (gsi=9) [ 0.296499] xen: --> pirq=10 -> irq=10 (gsi=10) [ 0.296508] xen: --> pirq=11 -> irq=11 (gsi=11) [ 0.296516] xen: --> pirq=12 -> irq=12 (gsi=12) [ 0.296524] xen: --> pirq=13 -> irq=13 (gsi=13) [ 0.296533] xen: --> pirq=14 -> irq=14 (gsi=14) [ 0.296541] xen: --> pirq=15 -> irq=15 (gsi=15) [ 0.296551] rcu: srcu_init: Setting srcu_struct sizes based on contention. [ 0.301853] Console: colour VGA+ 80x25 [ 0.316953] printk: console [tty0] enabled [ 0.318160] printk: console [hvc0] enabled [ 0.318276] ACPI: Core revision 20220331 [ 0.322695] clocksource: xen: mask: 0xffffffffffffffff max_cycles: 0x1cd42e4dffb, max_idle_ns: 881590591483 ns [ 0.322892] Xen: using vcpuop timer interface [ 0.322897] installing Xen timer for CPU 0 [ 0.323041] clocksource: tsc-early: mask: 0xffffffffffffffff max_cycles: 0x2c955c383c9, max_idle_ns: 440795294255 ns [ 0.323199] Calibrating delay loop (skipped), value calculated using timer frequency.. 6185.95 BogoMIPS (lpj=3092976) [ 0.323502] Last level iTLB entries: 4KB 512, 2MB 8, 4MB 8 [ 0.323618] Last level dTLB entries: 4KB 512, 2MB 32, 4MB 32, 1GB 0 [ 0.323745] Spectre V1 : Mitigation: usercopy/swapgs barriers and __user pointer sanitization [ 0.323893] Spectre V2 : Mitigation: Retpolines [ 0.324007] Spectre V2 : Spectre v2 / SpectreRSB mitigation: Filling RSB on context switch [ 0.324205] Spectre V2 : Spectre v2 / SpectreRSB : Filling RSB on VMEXIT [ 0.324324] Spectre V2 : Enabling Restricted Speculation for firmware calls [ 0.324445] Spectre V2 : mitigation: Enabling conditional Indirect Branch Prediction Barrier [ 0.324592] Spectre V2 : User space: Mitigation: STIBP via prctl [ 0.324709] Speculative Store Bypass: Mitigation: Speculative Store Bypass disabled via prctl [ 0.324856] MDS: Mitigation: Clear CPU buffers [ 0.324970] MMIO Stale Data: Unknown: No mitigations [ 0.325104] x86/fpu: Supporting XSAVE feature 0x001: 'x87 floating point registers' [ 0.325204] x86/fpu: Supporting XSAVE feature 0x002: 'SSE registers' [ 0.325323] x86/fpu: Supporting XSAVE feature 0x004: 'AVX registers' [ 0.325442] x86/fpu: xstate_offset[2]: 576, xstate_sizes[2]: 256 [ 0.325607] x86/fpu: Enabled xstate features 0x7, context size is 832 bytes, using 'standard' format. [ 0.339669] Freeing SMP alternatives memory: 40K [ 0.340205] pid_max: default: 32768 minimum: 301 [ 0.340330] LSM: Security Framework initializing [ 0.340450] SELinux: Initializing. [ 0.340584] Mount-cache hash table entries: 1024 (order: 1, 8192 bytes, linear) [ 0.340730] Mountpoint-cache hash table entries: 1024 (order: 1, 8192 bytes, linear) [ 0.341210] cpu 0 spinlock event irq 25 [ 0.341329] VPMU disabled by hypervisor. [ 0.341813] cblist_init_generic: Setting adjustable number of callback queues. [ 0.341958] cblist_init_generic: Setting shift to 2 and lim to 1. [ 0.342120] Performance Events: unsupported p6 CPU model 58 no PMU driver, software events only. [ 0.342203] signal: max sigframe size: 1776 [ 0.342374] rcu: Hierarchical SRCU implementation. [ 0.342488] rcu: Max phase no-delay instances is 400. [ 0.342927] smp: Bringing up secondary CPUs ... [ 0.343298] installing Xen timer for CPU 1 [ 0.343765] cpu 1 spinlock event irq 35 [ 0.344423] MDS CPU bug present and SMT on, data leak possible. See https://www.kernel.org/doc/html/latest/admin-guide/hw-vuln/mds.html for more details. [ 0.345210] installing Xen timer for CPU 2 [ 0.345698] cpu 2 spinlock event irq 41 [ 0.345698] installing Xen timer for CPU 3 [ 0.346553] cpu 3 spinlock event irq 47 [ 0.346553] smp: Brought up 1 node, 4 CPUs [ 0.346553] smpboot: Max logical packages: 1 [ 0.347248] devtmpfs: initialized [ 0.347382] x86/mm: Memory block size: 128MB [ 0.347648] ACPI: PM: Registering ACPI NVS region [mem 0xab9ba000-0xbba3afff] (268963840 bytes) [ 0.350483] ACPI: PM: Registering ACPI NVS region [mem 0xbede0000-0xbefdffff] (2097152 bytes) [ 0.350690] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 1911260446275000 ns [ 0.350843] futex hash table entries: 1024 (order: 4, 65536 bytes, linear) [ 0.351085] PM: RTC time: 14:27:42, date: 2024-06-26 [ 0.351354] NET: Registered PF_NETLINK/PF_ROUTE protocol family [ 0.351493] xen:grant_table: Grant tables using version 1 layout [ 0.351630] Grant table initialized [ 0.351838] audit: initializing netlink subsys (disabled) [ 0.351971] audit: type=2000 audit(1719412062.917:1): state=initialized audit_enabled=0 res=1 [ 0.352258] thermal_sys: Registered thermal governor 'step_wise' [ 0.352259] thermal_sys: Registered thermal governor 'user_space' [ 0.352405] Simple Boot Flag at 0x4f set to 0x1 [ 0.352651] ACPI FADT declares the system doesn't support PCIe ASPM, so disable it [ 0.352923] PCI: MMCONFIG for domain 0000 [bus 00-3f] at [mem 0xf8000000-0xfbffffff] (base 0xf8000000) [ 0.353076] PCI: MMCONFIG at [mem 0xf8000000-0xfbffffff] reserved in E820 [ 0.387597] PCI: Using configuration type 1 for base access [ 0.389605] kprobes: kprobe jump-optimization is enabled. All kprobes are optimized if possible. [ 0.390239] ACPI: Added _OSI(Module Device) [ 0.390353] ACPI: Added _OSI(Processor Device) [ 0.390466] ACPI: Added _OSI(3.0 _SCP Extensions) [ 0.390579] ACPI: Added _OSI(Processor Aggregator Device) [ 0.397422] ACPI: 7 ACPI AML tables successfully acquired and loaded [ 0.398130] xen: registering gsi 9 triggering 0 polarity 0 [ 0.398545] ACPI: [Firmware Bug]: BIOS _OSI(Linux) query ignored [ 0.401912] ACPI: Dynamic OEM Table Load: [ 0.402030] ACPI: SSDT 0xFFFF88800351C000 00083B (v01 PmRef Cpu0Cst 00003001 INTL 20100331) [ 0.402774] ACPI: Dynamic OEM Table Load: [ 0.402890] ACPI: SSDT 0xFFFF88800358B000 000303 (v01 PmRef ApIst 00003000 INTL 20100331) [ 0.403485] ACPI: Dynamic OEM Table Load: [ 0.403600] ACPI: SSDT 0xFFFF888003553200 000119 (v01 PmRef ApCst 00003000 INTL 20100331) [ 0.404712] ACPI: Interpreter enabled [ 0.404840] ACPI: PM: (supports S0 S1 S3 S5) [ 0.404953] ACPI: Using IOAPIC for interrupt routing [ 0.405092] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug [ 0.405203] PCI: Using E820 reservations for host bridge windows [ 0.405556] ACPI: Enabled 10 GPEs in block 00 to 3F [ 0.411600] acpi ABCDEFGH:00: ACPI dock station (docks/bays count: 1) [ 0.413867] ACPI: PM: Power Resource [FN00] [ 0.414036] ACPI: PM: Power Resource [FN01] [ 0.414210] ACPI: PM: Power Resource [FN02] [ 0.414376] ACPI: PM: Power Resource [FN03] [ 0.414543] ACPI: PM: Power Resource [FN04] [ 0.415366] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-3e]) [ 0.415491] acpi PNP0A08:00: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI HPX-Type3] [ 0.416057] acpi PNP0A08:00: _OSC: platform does not support [LTR] [ 0.416738] acpi PNP0A08:00: _OSC: OS now controls [PME PCIeCapability] [ 0.416860] acpi PNP0A08:00: FADT indicates ASPM is unsupported, using BIOS configuration [ 0.417504] PCI host bridge to bus 0000:00 [ 0.417617] pci_bus 0000:00: root bus resource [io 0x0000-0x0cf7 window] [ 0.417739] pci_bus 0000:00: root bus resource [io 0x0d00-0xffff window] [ 0.417858] pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff window] [ 0.418002] pci_bus 0000:00: root bus resource [mem 0x000d0000-0x000e7fff window] [ 0.418145] pci_bus 0000:00: root bus resource [mem 0xc0000000-0xfeafffff window] [ 0.418203] pci_bus 0000:00: root bus resource [mem 0xfed40000-0xfed44fff window] [ 0.418347] pci_bus 0000:00: root bus resource [bus 00-3e] [ 0.418503] pci 0000:00:00.0: [8086:0158] type 00 class 0x060000 [ 0.419132] pci 0000:00:19.0: [8086:1502] type 00 class 0x020000 [ 0.419276] pci 0000:00:19.0: reg 0x10: [mem 0xc1b00000-0xc1b1ffff] [ 0.419435] pci 0000:00:19.0: reg 0x14: [mem 0xc1b70000-0xc1b70fff] [ 0.419592] pci 0000:00:19.0: reg 0x18: [io 0x4040-0x405f] [ 0.420037] pci 0000:00:19.0: PME# supported from D0 D3hot D3cold [ 0.420375] pci 0000:00:1a.0: [8086:1c2d] type 00 class 0x0c0320 [ 0.420572] pci 0000:00:1a.0: reg 0x10: [mem 0xc1b60000-0xc1b603ff] [ 0.421098] pci 0000:00:1a.0: PME# supported from D0 D3hot D3cold [ 0.421416] pci 0000:00:1c.0: [8086:1c10] type 01 class 0x060400 [ 0.421980] pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold [ 0.422187] pci 0000:00:1c.0: Enabling MPC IRBNCE [ 0.422210] pci 0000:00:1c.0: Intel PCH root port ACS workaround enabled [ 0.422509] pci 0000:00:1c.4: [8086:1c18] type 01 class 0x060400 [ 0.423073] pci 0000:00:1c.4: PME# supported from D0 D3hot D3cold [ 0.423327] pci 0000:00:1c.4: Enabling MPC IRBNCE [ 0.423447] pci 0000:00:1c.4: Intel PCH root port ACS workaround enabled [ 0.423766] pci 0000:00:1d.0: [8086:1c26] type 00 class 0x0c0320 [ 0.423957] pci 0000:00:1d.0: reg 0x10: [mem 0xc1b50000-0xc1b503ff] [ 0.424482] pci 0000:00:1d.0: PME# supported from D0 D3hot D3cold [ 0.424804] pci 0000:00:1e.0: [8086:244e] type 01 class 0x060401 [ 0.425379] pci 0000:00:1f.0: [8086:1c52] type 00 class 0x060100 [ 0.426116] pci 0000:00:1f.2: [8086:1c02] type 00 class 0x010601 [ 0.426276] pci 0000:00:1f.2: reg 0x10: [io 0x4090-0x4097] [ 0.426432] pci 0000:00:1f.2: reg 0x14: [io 0x4080-0x4083] [ 0.426588] pci 0000:00:1f.2: reg 0x18: [io 0x4070-0x4077] [ 0.426743] pci 0000:00:1f.2: reg 0x1c: [io 0x4060-0x4063] [ 0.426899] pci 0000:00:1f.2: reg 0x20: [io 0x4020-0x403f] [ 0.427052] pci 0000:00:1f.2: reg 0x24: [mem 0xc1b40000-0xc1b407ff] [ 0.427441] pci 0000:00:1f.2: PME# supported from D3hot [ 0.427739] pci 0000:00:1f.3: [8086:1c22] type 00 class 0x0c0500 [ 0.427953] pci 0000:00:1f.3: reg 0x10: [mem 0xc1b30000-0xc1b300ff 64bit] [ 0.428187] pci 0000:00:1f.3: reg 0x20: [io 0x4000-0x401f] [ 0.428561] pci 0000:00:1c.0: PCI bridge to [bus 01] [ 0.428689] pci 0000:00:1c.0: bridge window [io 0x3000-0x3fff] [ 0.428817] pci 0000:00:1c.0: bridge window [mem 0xc1000000-0xc19fffff] [ 0.428957] pci 0000:00:1c.0: bridge window [mem 0xc1c00000-0xc25fffff 64bit pref] [ 0.429352] pci 0000:02:00.0: [8086:10d3] type 00 class 0x020000 [ 0.429568] pci 0000:02:00.0: reg 0x10: [mem 0xc1a00000-0xc1a1ffff] [ 0.429792] pci 0000:02:00.0: reg 0x18: [io 0x2000-0x201f] [ 0.429959] pci 0000:02:00.0: reg 0x1c: [mem 0xc1a20000-0xc1a23fff] [ 0.430556] pci 0000:02:00.0: PME# supported from D0 D3hot D3cold [ 0.431089] pci 0000:00:1c.4: PCI bridge to [bus 02] [ 0.431215] pci 0000:00:1c.4: bridge window [io 0x2000-0x2fff] [ 0.431344] pci 0000:00:1c.4: bridge window [mem 0xc1a00000-0xc1afffff] [ 0.431576] pci_bus 0000:03: extended config space not accessible [ 0.431751] pci 0000:03:02.0: [126f:0712] type 00 class 0x030000 [ 0.431942] pci 0000:03:02.0: reg 0x10: [mem 0xc0000000-0xc0ffffff] [ 0.432329] pci 0000:03:02.0: Video device with shadowed ROM at [mem 0x000c0000-0x000dffff] [ 0.432582] pci 0000:03:02.0: supports D1 D2 [ 0.432940] pci 0000:00:1e.0: PCI bridge to [bus 03] (subtractive decode) [ 0.433084] pci 0000:00:1e.0: bridge window [mem 0xc0000000-0xc0ffffff] [ 0.433226] pci 0000:00:1e.0: bridge window [io 0x0000-0x0cf7 window] (subtractive decode) [ 0.433375] pci 0000:00:1e.0: bridge window [io 0x0d00-0xffff window] (subtractive decode) [ 0.433521] pci 0000:00:1e.0: bridge window [mem 0x000a0000-0x000bffff window] (subtractive decode) [ 0.433668] pci 0000:00:1e.0: bridge window [mem 0x000d0000-0x000e7fff window] (subtractive decode) [ 0.433817] pci 0000:00:1e.0: bridge window [mem 0xc0000000-0xfeafffff window] (subtractive decode) [ 0.433964] pci 0000:00:1e.0: bridge window [mem 0xfed40000-0xfed44fff window] (subtractive decode) [ 0.434197] pci_bus 0000:00: on NUMA node 0 [ 0.434361] xen: registering gsi 13 triggering 1 polarity 0 [ 0.434860] ACPI: PCI: Interrupt link LNKA configured for IRQ 11 [ 0.435050] ACPI: PCI: Interrupt link LNKB configured for IRQ 10 [ 0.435239] ACPI: PCI: Interrupt link LNKC configured for IRQ 0 [ 0.435358] ACPI: PCI: Interrupt link LNKC disabled [ 0.435540] ACPI: PCI: Interrupt link LNKD configured for IRQ 10 [ 0.435726] ACPI: PCI: Interrupt link LNKE configured for IRQ 3 [ 0.435916] ACPI: PCI: Interrupt link LNKF configured for IRQ 11 [ 0.436101] ACPI: PCI: Interrupt link LNKG configured for IRQ 5 [ 0.436271] ACPI: PCI: Interrupt link LNKH configured for IRQ 0 [ 0.436390] ACPI: PCI: Interrupt link LNKH disabled [ 0.436817] xen:balloon: Initialising balloon driver [ 0.436949] iommu: Default domain type: Translated [ 0.437204] iommu: DMA domain TLB invalidation policy: lazy mode [ 0.437371] SCSI subsystem initialized [ 0.437496] libata version 3.00 loaded. [ 0.437496] ACPI: bus type USB registered [ 0.437496] usbcore: registered new interface driver usbfs [ 0.437496] usbcore: registered new interface driver hub [ 0.437602] usbcore: registered new device driver usb [ 0.437728] pps_core: LinuxPPS API ver. 1 registered [ 0.438204] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti [ 0.438356] PTP clock support registered [ 0.438487] Advanced Linux Sound Architecture Driver Initialized. [ 0.438487] NetLabel: Initializing [ 0.438584] NetLabel: domain hash size = 128 [ 0.438697] NetLabel: protocols = UNLABELED CIPSOv4 CALIPSO [ 0.438826] NetLabel: unlabeled traffic allowed by default [ 0.439336] PCI: Using ACPI for IRQ routing [ 0.449891] PCI: pci_cache_line_size set to 64 bytes [ 0.450031] e820: reserve RAM buffer [mem 0x0009b000-0x0009ffff] [ 0.450033] e820: reserve RAM buffer [mem 0x20065000-0x23ffffff] [ 0.450054] pci 0000:03:02.0: vgaarb: setting as boot VGA device [ 0.450054] pci 0000:03:02.0: vgaarb: bridge control possible [ 0.450054] pci 0000:03:02.0: vgaarb: VGA device added: decodes=io+mem,owns=io+mem,locks=none [ 0.450203] vgaarb: loaded [ 0.451838] clocksource: Switched to clocksource tsc-early [ 0.452019] VFS: Disk quotas dquot_6.6.0 [ 0.452140] VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes) [ 0.452140] hugetlbfs: disabling because there are no supported hugepage sizes [ 0.452140] pnp: PnP ACPI init [ 0.452140] system 00:00: [io 0x0680-0x069f] has been reserved [ 0.452176] system 00:00: [io 0xffff] has been reserved [ 0.452292] system 00:00: [io 0xffff] has been reserved [ 0.452406] system 00:00: [io 0xffff] has been reserved [ 0.452521] system 00:00: [io 0x0400-0x0453] has been reserved [ 0.452635] system 00:00: [io 0x0458-0x047f] has been reserved [ 0.452635] system 00:00: [io 0x0500-0x057f] has been reserved [ 0.452635] system 00:00: [io 0x164e-0x164f] has been reserved [ 0.452635] system 00:00: [io 0x0900-0x090f] has been reserved [ 0.452635] system 00:00: [io 0x0295-0x0296] has been reserved [ 0.453253] xen: registering gsi 8 triggering 1 polarity 0 [ 0.453311] system 00:02: [io 0x0454-0x0457] has been reserved [ 0.453707] xen: registering gsi 4 triggering 1 polarity 0 [ 0.453711] Already setup the GSI :4 [ 0.454220] system 00:04: [mem 0xfed1c000-0xfed1ffff] has been reserved [ 0.454343] system 00:04: [mem 0xfed10000-0xfed17fff] has been reserved [ 0.454463] system 00:04: [mem 0xfed18000-0xfed18fff] has been reserved [ 0.454585] system 00:04: [mem 0xfed19000-0xfed19fff] has been reserved [ 0.454733] system 00:04: [mem 0xf8000000-0xfbffffff] has been reserved [ 0.454852] system 00:04: [mem 0xfed20000-0xfed3ffff] has been reserved [ 0.454971] system 00:04: [mem 0xfed90000-0xfed93fff] could not be reserved [ 0.455090] system 00:04: [mem 0xfed45000-0xfed8ffff] has been reserved [ 0.455219] system 00:04: [mem 0xff000000-0xffffffff] could not be reserved [ 0.455340] system 00:04: [mem 0xfee00000-0xfeefffff] has been reserved [ 0.455459] system 00:04: [mem 0xc1b90000-0xc1b90fff] has been reserved [ 0.455839] system 00:05: [mem 0x00000000-0x0009cfff] could not be reserved [ 0.456011] pnp: PnP ACPI: found 6 devices [ 0.482871] PM-Timer failed consistency check (0xffffff) - aborting. [ 0.483043] NET: Registered PF_INET protocol family [ 0.483212] IP idents hash table entries: 8192 (order: 4, 65536 bytes, linear) [ 0.483536] tcp_listen_portaddr_hash hash table entries: 256 (order: 0, 4096 bytes, linear) [ 0.483686] Table-perturb hash table entries: 65536 (order: 6, 262144 bytes, linear) [ 0.483879] TCP established hash table entries: 4096 (order: 3, 32768 bytes, linear) [ 0.484028] TCP bind hash table entries: 4096 (order: 5, 131072 bytes, linear) [ 0.484187] TCP: Hash tables configured (established 4096 bind 4096) [ 0.484352] UDP hash table entries: 256 (order: 1, 8192 bytes, linear) [ 0.484500] UDP-Lite hash table entries: 256 (order: 1, 8192 bytes, linear) [ 0.484648] NET: Registered PF_UNIX/PF_LOCAL protocol family [ 0.484985] RPC: Registered named UNIX socket transport module. [ 0.485108] RPC: Registered udp transport module. [ 0.485243] RPC: Registered tcp transport module. [ 0.485357] RPC: Registered tcp NFSv4.1 backchannel transport module. [ 0.485746] pci 0000:00:1c.0: PCI bridge to [bus 01] [ 0.485870] pci 0000:00:1c.0: bridge window [io 0x3000-0x3fff] [ 0.486006] pci 0000:00:1c.0: bridge window [mem 0xc1000000-0xc19fffff] [ 0.486139] pci 0000:00:1c.0: bridge window [mem 0xc1c00000-0xc25fffff 64bit pref] [ 0.486315] pci 0000:00:1c.4: PCI bridge to [bus 02] [ 0.486436] pci 0000:00:1c.4: bridge window [io 0x2000-0x2fff] [ 0.486572] pci 0000:00:1c.4: bridge window [mem 0xc1a00000-0xc1afffff] [ 0.486726] pci 0000:00:1e.0: PCI bridge to [bus 03] [ 0.486857] pci 0000:00:1e.0: bridge window [mem 0xc0000000-0xc0ffffff] [ 0.487011] pci_bus 0000:00: resource 4 [io 0x0000-0x0cf7 window] [ 0.487130] pci_bus 0000:00: resource 5 [io 0x0d00-0xffff window] [ 0.487254] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff window] [ 0.487375] pci_bus 0000:00: resource 7 [mem 0x000d0000-0x000e7fff window] [ 0.487495] pci_bus 0000:00: resource 8 [mem 0xc0000000-0xfeafffff window] [ 0.487616] pci_bus 0000:00: resource 9 [mem 0xfed40000-0xfed44fff window] [ 0.487736] pci_bus 0000:01: resource 0 [io 0x3000-0x3fff] [ 0.487854] pci_bus 0000:01: resource 1 [mem 0xc1000000-0xc19fffff] [ 0.487999] pci_bus 0000:01: resource 2 [mem 0xc1c00000-0xc25fffff 64bit pref] [ 0.488141] pci_bus 0000:02: resource 0 [io 0x2000-0x2fff] [ 0.488265] pci_bus 0000:02: resource 1 [mem 0xc1a00000-0xc1afffff] [ 0.488385] pci_bus 0000:03: resource 1 [mem 0xc0000000-0xc0ffffff] [ 0.488504] pci_bus 0000:03: resource 4 [io 0x0000-0x0cf7 window] [ 0.488622] pci_bus 0000:03: resource 5 [io 0x0d00-0xffff window] [ 0.488740] pci_bus 0000:03: resource 6 [mem 0x000a0000-0x000bffff window] [ 0.488859] pci_bus 0000:03: resource 7 [mem 0x000d0000-0x000e7fff window] [ 0.488978] pci_bus 0000:03: resource 8 [mem 0xc0000000-0xfeafffff window] [ 0.489098] pci_bus 0000:03: resource 9 [mem 0xfed40000-0xfed44fff window] [ 0.489347] xen: registering gsi 22 triggering 0 polarity 1 [ 0.489369] xen: --> pirq=22 -> irq=22 (gsi=22) [ 0.511331] pci 0000:00:1a.0: quirk_usb_early_handoff+0x0/0x720 took 21521 usecs [ 0.511560] xen: registering gsi 20 triggering 0 polarity 1 [ 0.511582] xen: --> pirq=20 -> irq=20 (gsi=20) [ 0.533357] pci 0000:00:1d.0: quirk_usb_early_handoff+0x0/0x720 took 21331 usecs [ 0.533556] PCI: CLS 64 bytes, default 64 [ 0.533677] PCI-DMA: Using software bounce buffering for IO (SWIOTLB) [ 0.533721] Unpacking initramfs... [ 0.533795] software IO TLB: mapped [mem 0x000000001b180000-0x000000001f180000] (64MB) [ 0.534147] kvm: no hardware support for 'kvm_intel' [ 0.534275] has_svm: not amd or hygon [ 0.534389] kvm: no hardware support for 'kvm_amd' [ 0.534507] clocksource: tsc: mask: 0xffffffffffffffff max_cycles: 0x2c955c383c9, max_idle_ns: 440795294255 ns [ 0.534729] clocksource: Switched to clocksource tsc [ 0.535997] Initialise system trusted keyrings [ 0.536267] workingset: timestamp_bits=62 max_order=17 bucket_order=0 [ 0.537412] NFS: Registering the id_resolver key type [ 0.537536] Key type id_resolver registered [ 0.537659] Key type id_legacy registered [ 0.537829] 9p: Installing v9fs 9p2000 file system support [ 0.548377] Key type asymmetric registered [ 0.548503] Asymmetric key parser 'x509' registered [ 0.548641] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 251) [ 0.548808] io scheduler mq-deadline registered [ 0.548922] io scheduler kyber registered [ 0.549497] xen: registering gsi 16 triggering 0 polarity 1 [ 0.549523] xen: --> pirq=16 -> irq=16 (gsi=16) [ 0.549765] pcieport 0000:00:1c.0: PME: Signaling with IRQ 50 [ 0.550127] xen: registering gsi 16 triggering 0 polarity 1 [ 0.550131] Already setup the GSI :16 [ 0.550424] pcieport 0000:00:1c.4: PME: Signaling with IRQ 51 [ 0.550857] input: Sleep Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0E:00/input/input0 [ 0.551251] ACPI: button: Sleep Button [SLPB] [ 0.551397] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input1 [ 0.551619] ACPI: button: Power Button [PWRF] [ 0.552103] Monitor-Mwait will be used to enter C-1 state [ 0.552139] Monitor-Mwait will be used to enter C-3 state [ 0.552156] ACPI: \_PR_.CPU0: Found 2 idle states [ 0.552459] ACPI: \_PR_.CPU1: Found 2 idle states [ 0.552908] ACPI: \_PR_.CPU2: Found 2 idle states [ 0.553305] ACPI: \_PR_.CPU3: Found 2 idle states [ 0.553856] thermal LNXTHERM:00: registered as thermal_zone0 [ 0.553976] ACPI: thermal: Thermal Zone [TZ00] (28 C) [ 0.554279] thermal LNXTHERM:01: registered as thermal_zone1 [ 0.554400] ACPI: thermal: Thermal Zone [TZ01] (30 C) [ 0.554789] xen:xen_evtchn: Event-channel device installed [ 0.554977] xen_pciback: backend is vpci [ 0.555738] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled [ 0.556436] hpet_acpi_add: no address or irqs in _CRS [ 0.556618] Non-volatile memory driver v1.3 [ 0.556748] AMD-Vi: AMD IOMMUv2 functionality not available on this system - This is not a bug. [ 0.558592] loop: module loaded [ 0.563445] ahci 0000:00:1f.2: version 3.0 [ 0.563544] xen: registering gsi 21 triggering 0 polarity 1 [ 0.563569] xen: --> pirq=21 -> irq=21 (gsi=21) [ 0.573879] ahci 0000:00:1f.2: AHCI 0001.0300 32 slots 6 ports 3 Gbps 0x3f impl SATA mode [ 0.574038] ahci 0000:00:1f.2: flags: 64bit ncq sntf pm led clo pio slum part ems apst [ 0.589249] scsi host0: ahci [ 0.589707] scsi host1: ahci [ 0.590111] scsi host2: ahci [ 0.590507] scsi host3: ahci [ 0.590909] scsi host4: ahci [ 0.591289] scsi host5: ahci [ 0.591433] ata1: SATA max UDMA/133 abar m2048@0xc1b40000 port 0xc1b40100 irq 53 [ 0.591580] ata2: SATA max UDMA/133 abar m2048@0xc1b40000 port 0xc1b40180 irq 53 [ 0.591740] ata3: SATA max UDMA/133 abar m2048@0xc1b40000 port 0xc1b40200 irq 53 [ 0.591887] ata4: SATA max UDMA/133 abar m2048@0xc1b40000 port 0xc1b40280 irq 53 [ 0.592032] ata5: SATA max UDMA/133 abar m2048@0xc1b40000 port 0xc1b40300 irq 53 [ 0.592178] ata6: SATA max UDMA/133 abar m2048@0xc1b40000 port 0xc1b40380 irq 53 [ 0.592505] tun: Universal TUN/TAP device driver, 1.6 [ 0.592714] e100: Intel(R) PRO/100 Network Driver [ 0.592830] e100: Copyright(c) 1999-2006 Intel Corporation [ 0.592954] sky2: driver version 1.30 [ 0.593091] xen_netfront: Initialising Xen virtual ethernet driver [ 0.602185] xen: registering gsi 22 triggering 0 polarity 1 [ 0.602192] Already setup the GSI :22 [ 0.602377] ehci-pci 0000:00:1a.0: EHCI Host Controller [ 0.602578] ehci-pci 0000:00:1a.0: new USB bus registered, assigned bus number 1 [ 0.602773] ehci-pci 0000:00:1a.0: debug port 2 [ 0.606917] ehci-pci 0000:00:1a.0: irq 22, io mem 0xc1b60000 [ 0.613671] ehci-pci 0000:00:1a.0: USB 2.0 started, EHCI 1.00 [ 0.613940] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 6.01 [ 0.614089] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 0.614232] usb usb1: Product: EHCI Host Controller [ 0.614346] usb usb1: Manufacturer: Linux 6.1.95+ ehci_hcd [ 0.614463] usb usb1: SerialNumber: 0000:00:1a.0 [ 0.614748] hub 1-0:1.0: USB hub found [ 0.614878] hub 1-0:1.0: 2 ports detected [ 0.615216] xen: registering gsi 20 triggering 0 polarity 1 [ 0.615222] Already setup the GSI :20 [ 0.615393] ehci-pci 0000:00:1d.0: EHCI Host Controller [ 0.615571] ehci-pci 0000:00:1d.0: new USB bus registered, assigned bus number 2 [ 0.615760] ehci-pci 0000:00:1d.0: debug port 2 [ 0.617628] Freeing initrd memory: 19884K [ 0.619909] ehci-pci 0000:00:1d.0: irq 20, io mem 0xc1b50000 [ 0.626730] ehci-pci 0000:00:1d.0: USB 2.0 started, EHCI 1.00 [ 0.626954] usb usb2: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 6.01 [ 0.627102] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 0.627246] usb usb2: Product: EHCI Host Controller [ 0.627403] usb usb2: Manufacturer: Linux 6.1.95+ ehci_hcd [ 0.627520] usb usb2: SerialNumber: 0000:00:1d.0 [ 0.627838] hub 2-0:1.0: USB hub found [ 0.627970] hub 2-0:1.0: 2 ports detected [ 0.628284] usbcore: registered new interface driver usblp [ 0.628415] usbcore: registered new interface driver usb-storage [ 0.628562] i8042: PNP: No PS/2 controller found. [ 0.628941] rtc_cmos 00:01: RTC can wake from S4 [ 0.629563] rtc_cmos 00:01: registered as rtc0 [ 0.629743] rtc_cmos 00:01: alarms up to one month, y3k, 242 bytes nvram [ 0.629920] device-mapper: uevent: version 1.0.3 [ 0.629985] xen: registering gsi 22 triggering 0 polarity 1 [ 0.630042] Already setup the GSI :22 [ 0.630133] device-mapper: ioctl: 4.47.0-ioctl (2022-07-28) initialised: dm-devel@redhat.com [ 0.630225] i801_smbus 0000:00:1f.3: SMBus using PCI interrupt [ 0.630315] intel_pstate: CPU model not supported [ 0.630556] hid: raw HID events driver (C) Jiri Kosina [ 0.630789] usbcore: registered new interface driver usbhid [ 0.630906] usbhid: USB HID core driver [ 0.631336] Initializing XFRM netlink socket [ 0.631489] i2c i2c-0: 1/4 memory slots populated (from DMI) [ 0.631561] NET: Registered PF_INET6 protocol family [ 0.632162] i2c i2c-0: Successfully instantiated SPD at 0x51 [ 0.632219] Segment Routing with IPv6 [ 0.632404] In-situ OAM (IOAM) with IPv6 [ 0.632548] sit: IPv6, IPv4 and MPLS over IPv4 tunneling driver [ 0.632789] NET: Registered PF_PACKET protocol family [ 0.632966] 9pnet: Installing 9P2000 support [ 0.633093] Key type dns_resolver registered [ 0.633466] IPI shorthand broadcast: enabled [ 0.633602] sched_clock: Marking stable (606750378, 26644329)->(652643239, -19248532) [ 0.634054] registered taskstats version 1 [ 0.634169] Loading compiled-in X.509 certificates [ 0.636589] PM: Magic number: 12:365:486 [ 0.636772] printk: console [netcon0] enabled [ 0.636888] netconsole: network logging started [ 0.637166] cfg80211: Loading compiled-in X.509 certificates for regulatory database [ 0.648746] cfg80211: Loaded X.509 cert 'sforshee: 00b28ddf47aef9cea7' [ 0.649052] cfg80211: Loaded X.509 cert 'wens: 61c038651aabdcf94bd0ac7ff06c7248db18c600' [ 0.649658] cfg80211: loaded regulatory.db is malformed or signature is missing/invalid [ 0.649881] ALSA device list: [ 0.650007] No soundcards found. [ 0.852720] usb 1-1: new high-speed USB device number 2 using ehci-pci [ 0.868722] usb 2-1: new high-speed USB device number 2 using ehci-pci [ 0.897313] ata3: SATA link up 1.5 Gbps (SStatus 113 SControl 300) [ 0.897456] ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300) [ 0.898915] ata1.00: ATA-8: WDC WD1003FBYZ-010FB0, 01.01V03, max UDMA/133 [ 0.899467] ata1.00: 1953525168 sectors, multi 16: LBA48 NCQ (depth 32), AA [ 0.901632] ata1.00: configured for UDMA/133 [ 0.902010] scsi 0:0:0:0: Direct-Access ATA WDC WD1003FBYZ-0 1V03 PQ: 0 ANSI: 5 [ 0.902760] ata3.00: ATAPI: Slimtype DVD A DS8ABSH, AP52, max UDMA/100 [ 0.903305] sd 0:0:0:0: Attached scsi generic sg0 type 0 [ 0.903356] sd 0:0:0:0: [sda] 1953525168 512-byte logical blocks: (1.00 TB/932 GiB) [ 0.903598] sd 0:0:0:0: [sda] Write Protect is off [ 0.903807] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00 [ 0.903819] ata3.00: configured for UDMA/100 [ 0.903862] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 0.904170] sd 0:0:0:0: [sda] Preferred minimum I/O size 512 bytes [ 0.905239] ata2: SATA link down (SStatus 0 SControl 300) [ 0.905374] ata6: SATA link down (SStatus 0 SControl 300) [ 0.905510] ata4: SATA link down (SStatus 0 SControl 300) [ 0.905665] ata5: SATA link down (SStatus 0 SControl 300) [ 0.916443] scsi 2:0:0:0: CD-ROM Slimtype DVD A DS8ABSH AP52 PQ: 0 ANSI: 5 [ 0.930780] sda: sda1 sda2 < sda5 > [ 0.931308] sd 0:0:0:0: [sda] Attached SCSI disk [ 0.977863] sr 2:0:0:0: [sr0] scsi3-mmc drive: 24x/24x writer dvd-ram cd/rw xa/form2 cdda tray [ 0.978016] cdrom: Uniform CD-ROM driver Revision: 3.20 [ 0.981427] usb 1-1: New USB device found, idVendor=8087, idProduct=0024, bcdDevice= 0.00 [ 0.981577] usb 1-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0 [ 0.982080] hub 1-1:1.0: USB hub found [ 0.982401] hub 1-1:1.0: 6 ports detected [ 0.997438] usb 2-1: New USB device found, idVendor=8087, idProduct=0024, bcdDevice= 0.00 [ 0.997590] usb 2-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0 [ 0.998065] hub 2-1:1.0: USB hub found [ 0.998413] hub 2-1:1.0: 6 ports detected [ 1.010727] sr 2:0:0:0: Attached scsi CD-ROM sr0 [ 1.010841] sr 2:0:0:0: Attached scsi generic sg1 type 5 [ 1.012124] Freeing unused kernel image (initmem) memory: 1576K [ 1.012254] Write protecting the kernel read-only data: 22528k [ 1.031897] Freeing unused kernel image (text/rodata gap) memory: 2032K [ 1.033068] Freeing unused kernel image (rodata/data gap) memory: 1568K [ 1.199337] x86/mm: Checked W+X mappings: passed, no W+X pages found. [ 1.199462] Run /init as init process [ 1.199572] with arguments: [ 1.199573] /init [ 1.199574] placeholder [ 1.199574] with environment: [ 1.199575] HOME=/ [ 1.199576] TERM=linux [ 1.548586] e1000e: Intel(R) PRO/1000 Network Driver [ 1.548743] e1000e: Copyright(c) 1999 - 2015 Intel Corporation. [ 1.548963] xen: registering gsi 19 triggering 0 polarity 1 [ 1.548993] xen: --> pirq=19 -> irq=19 (gsi=19) [ 1.549242] e1000e 0000:00:19.0: Interrupt Throttling Rate (ints/sec) set to dynamic conservative mode [ 1.655995] e1000e 0000:00:19.0 0000:00:19.0 (uninitialized): registered PHC clock [ 1.753260] e1000e 0000:00:19.0 eth0: (PCI Express:2.5GT/s:Width x1) 00:1e:67:96:a4:17 [ 1.753412] e1000e 0000:00:19.0 eth0: Intel(R) PRO/1000 Network Connection [ 1.753578] e1000e 0000:00:19.0 eth0: MAC: 10, PHY: 11, PBA No: 0050FF-0FF [ 1.753821] xen: registering gsi 16 triggering 0 polarity 1 [ 1.753828] Already setup the GSI :16 [ 1.754248] e1000e 0000:02:00.0: Interrupt Throttling Rate (ints/sec) set to dynamic conservative mode [ 1.797646] e1000e 0000:02:00.0 0000:02:00.0 (uninitialized): registered PHC clock [ 1.844182] e1000e 0000:02:00.0 eth1: (PCI Express:2.5GT/s:Width x1) 00:1e:67:96:a4:16 [ 1.844335] e1000e 0000:02:00.0 eth1: Intel(R) PRO/1000 Network Connection [ 1.844540] e1000e 0000:02:00.0 eth1: MAC: 3, PHY: 8, PBA No: 1000FF-0FF [ 1.846517] e1000e 0000:00:19.0 enx001e6796a417: renamed from eth0 [ 1.856038] e1000e 0000:02:00.0 enx001e6796a416: renamed from eth1 [ 1.918657] random: crng init done [ 2.761240] EXT4-fs (dm-0): mounting ext3 file system using the ext4 subsystem [ 2.766321] EXT4-fs (dm-0): mounted filesystem with ordered data mode. Quota mode: none. [ 6.024509] EXT4-fs (dm-0): re-mounted. Quota mode: none. [ 7.433362] EXT4-fs (sda1): mounting ext3 file system using the ext4 subsystem [ 7.449129] EXT4-fs (sda1): mounted filesystem with ordered data mode. Quota mode: none. [ 7.542378] Adding 1949692k swap on /dev/mapper/italia0--vg-swap_1. Priority:-2 extents:1 across:1949692k [ 9.312962] xenbr0: port 1(enx001e6796a416) entered blocking state [ 9.313162] xenbr0: port 1(enx001e6796a416) entered disabled state [ 9.313317] device enx001e6796a416 entered promiscuous mode [ 11.749785] e1000e 0000:02:00.0 enx001e6796a416: NIC Link is Up 1000 Mbps Full Duplex, Flow Control: None [ 11.750382] IPv6: ADDRCONF(NETDEV_CHANGE): enx001e6796a416: link becomes ready [ 11.750558] xenbr0: port 1(enx001e6796a416) entered blocking state [ 11.750690] xenbr0: port 1(enx001e6796a416) entered forwarding state [ 11.750918] IPv6: ADDRCONF(NETDEV_CHANGE): xenbr0: link becomes ready