[ 0.000000] Linux version 6.1.95+ (osstest@godello0) (gcc (Debian 12.2.0-14) 12.2.0, GNU ld (GNU Binutils for Debian) 2.40) #1 SMP PREEMPT_DYNAMIC Wed Jun 26 13:06:55 UTC 2024 [ 0.000000] Command line: placeholder root=/dev/mapper/debina0--vg-root ro console=hvc0 [ 0.000000] Released 0 page(s) [ 0.000000] BIOS-provided physical RAM map: [ 0.000000] Xen: [mem 0x0000000000000000-0x0000000000099fff] usable [ 0.000000] Xen: [mem 0x000000000009ac00-0x00000000000fffff] reserved [ 0.000000] Xen: [mem 0x0000000000100000-0x0000000020065fff] usable [ 0.000000] Xen: [mem 0x00000000796ef000-0x00000000798bdfff] reserved [ 0.000000] Xen: [mem 0x00000000799b7000-0x0000000079e5afff] ACPI NVS [ 0.000000] Xen: [mem 0x0000000079e5b000-0x000000007bdb0fff] reserved [ 0.000000] Xen: [mem 0x000000007bdb2000-0x000000007be37fff] reserved [ 0.000000] Xen: [mem 0x0000000080000000-0x000000008fffffff] reserved [ 0.000000] Xen: [mem 0x00000000fbffc000-0x00000000fbffcfff] reserved [ 0.000000] Xen: [mem 0x00000000fec00000-0x00000000fec00fff] reserved [ 0.000000] Xen: [mem 0x00000000fed1c000-0x00000000fed1ffff] reserved [ 0.000000] Xen: [mem 0x00000000fee00000-0x00000000feefffff] reserved [ 0.000000] Xen: [mem 0x00000000ff000000-0x00000000ffffffff] reserved [ 0.000000] NX (Execute Disable) protection: active [ 0.000000] SMBIOS 2.8 present. [ 0.000000] DMI: Supermicro SYS-5018D-FN8T/X10SDV-TP8F, BIOS 1.0b 11/21/2016 [ 0.000000] Hypervisor detected: Xen PV [ 0.000462] tsc: Detected 2199.996 MHz processor [ 0.000904] e820: update [mem 0x00000000-0x00000fff] usable ==> reserved [ 0.000907] e820: remove [mem 0x000a0000-0x000fffff] usable [ 0.000914] last_pfn = 0x20066 max_arch_pfn = 0x400000000 [ 0.000916] Disabled [ 0.000917] x86/PAT: MTRRs disabled, skipping PAT initialization too. [ 0.000920] x86/PAT: Configuration [0-7]: WB WT UC- UC WC WP UC UC [ 0.000959] Kernel/User page tables isolation: disabled on XEN PV. [ 0.027640] RAMDISK: [mem 0x04000000-0x0536afff] [ 0.027649] ACPI: Early table checksum verification disabled [ 0.028249] ACPI: RSDP 0x00000000000F0580 000024 (v02 SUPERM) [ 0.028261] ACPI: XSDT 0x00000000799FF098 0000B4 (v01 SUPERM SMCI--MB 01072009 AMI 00010013) [ 0.028298] ACPI: FACP 0x0000000079A17AC0 00010C (v05 SUPERM SMCI--MB 01072009 AMI 00010013) [ 0.028346] ACPI: DSDT 0x00000000799FF1E8 0188D5 (v02 SUPERM SMCI--MB 01072009 INTL 20091013) [ 0.028362] ACPI: FACS 0x0000000079E59F80 000040 [ 0.028378] ACPI: APIC 0x0000000079A17BD0 0000BC (v03 SUPERM SMCI--MB 01072009 AMI 00010013) [ 0.028394] ACPI: FPDT 0x0000000079A17C90 000044 (v01 SUPERM SMCI--MB 01072009 AMI 00010013) [ 0.028410] ACPI: FIDT 0x0000000079A17CD8 00009C (v01 SUPERM SMCI--MB 01072009 AMI 00010013) [ 0.028426] ACPI: MCFG 0x0000000079A17D78 00003C (v01 SUPERM SMCI--MB 01072009 MSFT 00000097) [ 0.028442] ACPI: UEFI 0x0000000079A17DB8 000042 (v01 00000000 00000000) [ 0.028459] ACPI: DBG2 0x0000000079A17E00 000072 (v00 SUPERM SMCI--MB 00000000 INTL 20091013) [ 0.028475] ACPI: HPET 0x0000000079A17E78 000038 (v01 SUPERM SMCI--MB 00000001 INTL 20091013) [ 0.028491] ACPI: WDDT 0x0000000079A17EB0 000040 (v01 SUPERM SMCI--MB 00000000 INTL 20091013) [ 0.028507] ACPI: SSDT 0x0000000079A17EF0 00ED8B (v01 AMI PmMgt 00000001 INTL 20120913) [ 0.028523] ACPI: SSDT 0x0000000079A26C80 002285 (v02 SUPERM SpsNm 00000002 INTL 20120913) [ 0.028539] ACPI: SSDT 0x0000000079A28F08 000064 (v02 SUPERM SpsNvs 00000002 INTL 20120913) [ 0.028555] ACPI: PRAD 0x0000000079A28F70 000102 (v02 SUPERM SMCI--MB 00000002 INTL 20120913) [ 0.028571] ACPI: RMAD 0x0000000079A29078 0000CC (v01 SUPERM SMCI--MB 00000001 INTL 20091013) [ 0.028587] ACPI: HEST 0x0000000079A29148 0000A8 (v01 SUPERM SMCI--MB 00000001 INTL 00000001) [ 0.028603] ACPI: BERT 0x0000000079A291F0 000030 (v01 SUPERM SMCI--MB 00000001 INTL 00000001) [ 0.028619] ACPI: ERST 0x0000000079A29220 000230 (v01 SUPERM SMCI--MB 00000001 INTL 00000001) [ 0.028635] ACPI: EINJ 0x0000000079A29450 000130 (v01 SUPERM SMCI--MB 00000001 INTL 00000001) [ 0.028643] ACPI: Reserving FACP table memory at [mem 0x79a17ac0-0x79a17bcb] [ 0.028645] ACPI: Reserving DSDT table memory at [mem 0x799ff1e8-0x79a17abc] [ 0.028646] ACPI: Reserving FACS table memory at [mem 0x79e59f80-0x79e59fbf] [ 0.028647] ACPI: Reserving APIC table memory at [mem 0x79a17bd0-0x79a17c8b] [ 0.028648] ACPI: Reserving FPDT table memory at [mem 0x79a17c90-0x79a17cd3] [ 0.028649] ACPI: Reserving FIDT table memory at [mem 0x79a17cd8-0x79a17d73] [ 0.028650] ACPI: Reserving MCFG table memory at [mem 0x79a17d78-0x79a17db3] [ 0.028651] ACPI: Reserving UEFI table memory at [mem 0x79a17db8-0x79a17df9] [ 0.028652] ACPI: Reserving DBG2 table memory at [mem 0x79a17e00-0x79a17e71] [ 0.028653] ACPI: Reserving HPET table memory at [mem 0x79a17e78-0x79a17eaf] [ 0.028654] ACPI: Reserving WDDT table memory at [mem 0x79a17eb0-0x79a17eef] [ 0.028655] ACPI: Reserving SSDT table memory at [mem 0x79a17ef0-0x79a26c7a] [ 0.028656] ACPI: Reserving SSDT table memory at [mem 0x79a26c80-0x79a28f04] [ 0.028657] ACPI: Reserving SSDT table memory at [mem 0x79a28f08-0x79a28f6b] [ 0.028657] ACPI: Reserving PRAD table memory at [mem 0x79a28f70-0x79a29071] [ 0.028658] ACPI: Reserving RMAD table memory at [mem 0x79a29078-0x79a29143] [ 0.028659] ACPI: Reserving HEST table memory at [mem 0x79a29148-0x79a291ef] [ 0.028660] ACPI: Reserving BERT table memory at [mem 0x79a291f0-0x79a2921f] [ 0.028661] ACPI: Reserving ERST table memory at [mem 0x79a29220-0x79a2944f] [ 0.028662] ACPI: Reserving EINJ table memory at [mem 0x79a29450-0x79a2957f] [ 0.028708] Setting APIC routing to Xen PV. [ 0.032674] Zone ranges: [ 0.032675] DMA [mem 0x0000000000001000-0x0000000000ffffff] [ 0.032677] DMA32 [mem 0x0000000001000000-0x0000000020065fff] [ 0.032679] Normal empty [ 0.032680] Movable zone start for each node [ 0.032681] Early memory node ranges [ 0.032682] node 0: [mem 0x0000000000001000-0x0000000000099fff] [ 0.032683] node 0: [mem 0x0000000000100000-0x0000000020065fff] [ 0.032685] Initmem setup node 0 [mem 0x0000000000001000-0x0000000020065fff] [ 0.032690] On node 0, zone DMA: 1 pages in unavailable ranges [ 0.032728] On node 0, zone DMA: 102 pages in unavailable ranges [ 0.034269] On node 0, zone DMA32: 32666 pages in unavailable ranges [ 0.034274] p2m virtual area at (____ptrval____), size is 40000000 [ 0.221790] Remapped 102 page(s) [ 0.223142] ACPI: PM-Timer IO Port: 0x408 [ 0.223195] ACPI: LAPIC_NMI (acpi_id[0x00] high level lint[0x1]) [ 0.223198] ACPI: LAPIC_NMI (acpi_id[0x02] high level lint[0x1]) [ 0.223200] ACPI: LAPIC_NMI (acpi_id[0x04] high level lint[0x1]) [ 0.223201] ACPI: LAPIC_NMI (acpi_id[0x06] high level lint[0x1]) [ 0.223203] ACPI: LAPIC_NMI (acpi_id[0x01] high level lint[0x1]) [ 0.223204] ACPI: LAPIC_NMI (acpi_id[0x03] high level lint[0x1]) [ 0.223206] ACPI: LAPIC_NMI (acpi_id[0x05] high level lint[0x1]) [ 0.223207] ACPI: LAPIC_NMI (acpi_id[0x07] high level lint[0x1]) [ 0.223236] IOAPIC[0]: apic_id 8, version 32, address 0xfec00000, GSI 0-23 [ 0.223249] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl) [ 0.223252] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level) [ 0.223278] ACPI: Using ACPI (MADT) for SMP configuration information [ 0.223283] ACPI: HPET id: 0x8086a701 base: 0xfed00000 [ 0.223354] smpboot: Allowing 8 CPUs, 0 hotplug CPUs [ 0.223369] PM: hibernation: Registered nosave memory: [mem 0x00000000-0x00000fff] [ 0.223371] PM: hibernation: Registered nosave memory: [mem 0x0009a000-0x0009afff] [ 0.223372] PM: hibernation: Registered nosave memory: [mem 0x0009b000-0x000fffff] [ 0.223375] [mem 0x90000000-0xfbffbfff] available for PCI devices [ 0.223379] Booting kernel on Xen [ 0.223380] Xen version: 4.18.3-pre (preserve-AD) [ 0.223383] clocksource: refined-jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 1910969940391419 ns [ 0.229643] setup_percpu: NR_CPUS:64 nr_cpumask_bits:8 nr_cpu_ids:8 nr_node_ids:1 [ 0.229927] percpu: Embedded 54 pages/cpu s180520 r8192 d32472 u262144 [ 0.229934] pcpu-alloc: s180520 r8192 d32472 u262144 alloc=1*2097152 [ 0.229937] pcpu-alloc: [0] 0 1 2 3 4 5 6 7 [ 0.230019] xen: PV spinlocks enabled [ 0.230022] PV qspinlock hash table entries: 256 (order: 0, 4096 bytes, linear) [ 0.230027] Built 1 zonelists, mobility grouping on. Total pages: 129006 [ 0.230029] Kernel command line: placeholder root=/dev/mapper/debina0--vg-root ro console=hvc0 [ 0.230067] Unknown kernel command line parameters "placeholder", will be passed to user space. [ 0.230077] random: crng init done [ 0.230127] Dentry cache hash table entries: 65536 (order: 7, 524288 bytes, linear) [ 0.230152] Inode-cache hash table entries: 32768 (order: 6, 262144 bytes, linear) [ 0.231474] mem auto-init: stack:all(zero), heap alloc:off, heap free:off [ 0.231477] software IO TLB: area num 8. [ 0.291185] Memory: 390032K/524284K available (14349K kernel code, 2682K rwdata, 4576K rodata, 1576K init, 1296K bss, 134000K reserved, 0K cma-reserved) [ 0.291368] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=8, Nodes=1 [ 0.294117] Dynamic Preempt: voluntary [ 0.294246] rcu: Preemptible hierarchical RCU implementation. [ 0.294247] rcu: RCU event tracing is enabled. [ 0.294248] rcu: RCU restricting CPUs from NR_CPUS=64 to nr_cpu_ids=8. [ 0.294250] Trampoline variant of Tasks RCU enabled. [ 0.294252] rcu: RCU calculated value of scheduler-enlistment delay is 100 jiffies. [ 0.294253] rcu: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=8 [ 0.305035] NR_IRQS: 4352, nr_irqs: 488, preallocated irqs: 16 [ 0.305174] xen:events: Using FIFO-based ABI [ 0.305201] xen: --> pirq=1 -> irq=1 (gsi=1) [ 0.305210] xen: --> pirq=2 -> irq=2 (gsi=2) [ 0.305218] xen: --> pirq=3 -> irq=3 (gsi=3) [ 0.305225] xen: --> pirq=4 -> irq=4 (gsi=4) [ 0.305232] xen: --> pirq=5 -> irq=5 (gsi=5) [ 0.305239] xen: --> pirq=6 -> irq=6 (gsi=6) [ 0.305247] xen: --> pirq=7 -> irq=7 (gsi=7) [ 0.305254] xen: --> pirq=8 -> irq=8 (gsi=8) [ 0.305261] xen: --> pirq=9 -> irq=9 (gsi=9) [ 0.305269] xen: --> pirq=10 -> irq=10 (gsi=10) [ 0.305276] xen: --> pirq=11 -> irq=11 (gsi=11) [ 0.305284] xen: --> pirq=12 -> irq=12 (gsi=12) [ 0.305291] xen: --> pirq=13 -> irq=13 (gsi=13) [ 0.305298] xen: --> pirq=14 -> irq=14 (gsi=14) [ 0.305306] xen: --> pirq=15 -> irq=15 (gsi=15) [ 0.305317] rcu: srcu_init: Setting srcu_struct sizes based on contention. [ 0.310676] Console: colour VGA+ 80x25 [ 0.325394] printk: console [tty0] enabled [ 0.326658] printk: console [hvc0] enabled [ 0.326778] ACPI: Core revision 20220331 [ 0.340757] clocksource: xen: mask: 0xffffffffffffffff max_cycles: 0x1cd42e4dffb, max_idle_ns: 881590591483 ns [ 0.340920] Xen: using vcpuop timer interface [ 0.340925] installing Xen timer for CPU 0 [ 0.341075] clocksource: tsc-early: mask: 0xffffffffffffffff max_cycles: 0x1fb62f12e8c, max_idle_ns: 440795238402 ns [ 0.341234] Calibrating delay loop (skipped), value calculated using timer frequency.. 4399.99 BogoMIPS (lpj=2199996) [ 0.341560] Last level iTLB entries: 4KB 64, 2MB 8, 4MB 8 [ 0.341676] Last level dTLB entries: 4KB 64, 2MB 0, 4MB 0, 1GB 4 [ 0.341803] Spectre V1 : Mitigation: usercopy/swapgs barriers and __user pointer sanitization [ 0.341951] Spectre V2 : Mitigation: Retpolines [ 0.342064] Spectre V2 : Spectre v2 / SpectreRSB mitigation: Filling RSB on context switch [ 0.342384] Spectre V2 : Spectre v2 / SpectreRSB : Filling RSB on VMEXIT [ 0.342509] Spectre V2 : Enabling Restricted Speculation for firmware calls [ 0.342630] Spectre V2 : mitigation: Enabling conditional Indirect Branch Prediction Barrier [ 0.342778] Spectre V2 : User space: Mitigation: STIBP via prctl [ 0.342896] Speculative Store Bypass: Mitigation: Speculative Store Bypass disabled via prctl [ 0.343047] MDS: Mitigation: Clear CPU buffers [ 0.343159] TAA: Mitigation: Clear CPU buffers [ 0.343238] MMIO Stale Data: Vulnerable: Clear CPU buffers attempted, no microcode [ 0.343403] x86/fpu: Supporting XSAVE feature 0x001: 'x87 floating point registers' [ 0.343547] x86/fpu: Supporting XSAVE feature 0x002: 'SSE registers' [ 0.343666] x86/fpu: Supporting XSAVE feature 0x004: 'AVX registers' [ 0.343786] x86/fpu: xstate_offset[2]: 576, xstate_sizes[2]: 256 [ 0.343931] x86/fpu: Enabled xstate features 0x7, context size is 832 bytes, using 'standard' format. [ 0.361635] Freeing SMP alternatives memory: 40K [ 0.361767] pid_max: default: 32768 minimum: 301 [ 0.362255] LSM: Security Framework initializing [ 0.362377] SELinux: Initializing. [ 0.362515] Mount-cache hash table entries: 1024 (order: 1, 8192 bytes, linear) [ 0.362662] Mountpoint-cache hash table entries: 1024 (order: 1, 8192 bytes, linear) [ 0.363323] cpu 0 spinlock event irq 25 [ 0.363442] VPMU disabled by hypervisor. [ 0.363879] cblist_init_generic: Setting adjustable number of callback queues. [ 0.364025] cblist_init_generic: Setting shift to 3 and lim to 1. [ 0.364181] Performance Events: unsupported p6 CPU model 86 no PMU driver, software events only. [ 0.364239] signal: max sigframe size: 1776 [ 0.364401] rcu: Hierarchical SRCU implementation. [ 0.364532] rcu: Max phase no-delay instances is 400. [ 0.365030] smp: Bringing up secondary CPUs ... [ 0.365371] installing Xen timer for CPU 1 [ 0.365839] cpu 1 spinlock event irq 35 [ 0.366375] MDS CPU bug present and SMT on, data leak possible. See https://www.kernel.org/doc/html/latest/admin-guide/hw-vuln/mds.html for more details. [ 0.366542] TAA CPU bug present and SMT on, data leak possible. See https://www.kernel.org/doc/html/latest/admin-guide/hw-vuln/tsx_async_abort.html for more details. [ 0.366731] MMIO Stale Data CPU bug present and SMT on, data leak possible. See https://www.kernel.org/doc/html/latest/admin-guide/hw-vuln/processor_mmio_stale_data.html for more details. [ 0.367458] installing Xen timer for CPU 2 [ 0.367915] cpu 2 spinlock event irq 41 [ 0.368311] installing Xen timer for CPU 3 [ 0.368763] cpu 3 spinlock event irq 47 [ 0.368763] installing Xen timer for CPU 4 [ 0.369581] cpu 4 spinlock event irq 53 [ 0.369581] installing Xen timer for CPU 5 [ 0.370421] cpu 5 spinlock event irq 59 [ 0.370441] installing Xen timer for CPU 6 [ 0.371303] cpu 6 spinlock event irq 65 [ 0.371496] installing Xen timer for CPU 7 [ 0.371927] cpu 7 spinlock event irq 71 [ 0.372501] smp: Brought up 1 node, 8 CPUs [ 0.372621] smpboot: Max logical packages: 1 [ 0.372838] devtmpfs: initialized [ 0.373274] x86/mm: Memory block size: 128MB [ 0.373623] ACPI: PM: Registering ACPI NVS region [mem 0x799b7000-0x79e5afff] (4866048 bytes) [ 0.373623] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 1911260446275000 ns [ 0.373660] futex hash table entries: 2048 (order: 5, 131072 bytes, linear) [ 0.374357] PM: RTC time: 14:00:20, date: 2024-06-26 [ 0.374612] NET: Registered PF_NETLINK/PF_ROUTE protocol family [ 0.374758] xen:grant_table: Grant tables using version 1 layout [ 0.374895] Grant table initialized [ 0.375206] audit: initializing netlink subsys (disabled) [ 0.375283] audit: type=2000 audit(1719410420.816:1): state=initialized audit_enabled=0 res=1 [ 0.375321] thermal_sys: Registered thermal governor 'step_wise' [ 0.375321] thermal_sys: Registered thermal governor 'user_space' [ 0.375465] ACPI FADT declares the system doesn't support PCIe ASPM, so disable it [ 0.376269] PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0x80000000-0x8fffffff] (base 0x80000000) [ 0.376424] PCI: MMCONFIG at [mem 0x80000000-0x8fffffff] reserved in E820 [ 0.505189] PCI: Using configuration type 1 for base access [ 0.507769] kprobes: kprobe jump-optimization is enabled. All kprobes are optimized if possible. [ 0.508312] ACPI: Added _OSI(Module Device) [ 0.508402] ACPI: Added _OSI(Processor Device) [ 0.508515] ACPI: Added _OSI(3.0 _SCP Extensions) [ 0.508629] ACPI: Added _OSI(Processor Aggregator Device) [ 0.538874] ACPI: 4 ACPI AML tables successfully acquired and loaded [ 0.540865] xen: registering gsi 9 triggering 0 polarity 0 [ 0.543410] ACPI: Dynamic OEM Table Load: [ 0.551549] ACPI: Interpreter enabled [ 0.551687] ACPI: PM: (supports S0 S4 S5) [ 0.551799] ACPI: Using IOAPIC for interrupt routing [ 0.551943] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug [ 0.552093] PCI: Using E820 reservations for host bridge windows [ 0.552699] ACPI: Enabled 6 GPEs in block 00 to 3F [ 0.587767] ACPI: PCI Root Bridge [UNC0] (domain 0000 [bus ff]) [ 0.587897] acpi PNP0A03:03: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI HPX-Type3] [ 0.588132] acpi PNP0A03:03: _OSC: platform does not support [LTR] [ 0.588381] acpi PNP0A03:03: _OSC: OS now controls [PME PCIeCapability] [ 0.588502] acpi PNP0A03:03: FADT indicates ASPM is unsupported, using BIOS configuration [ 0.588681] PCI host bridge to bus 0000:ff [ 0.588794] pci_bus 0000:ff: root bus resource [bus ff] [ 0.588987] pci 0000:ff:0b.0: [8086:6f81] type 00 class 0x088000 [ 0.589433] pci 0000:ff:0b.1: [8086:6f36] type 00 class 0x110100 [ 0.589855] pci 0000:ff:0b.2: [8086:6f37] type 00 class 0x110100 [ 0.590278] pci 0000:ff:0b.3: [8086:6f76] type 00 class 0x088000 [ 0.590722] pci 0000:ff:0c.0: [8086:6fe0] type 00 class 0x088000 [ 0.591140] pci 0000:ff:0c.1: [8086:6fe1] type 00 class 0x088000 [ 0.591745] pci 0000:ff:0c.2: [8086:6fe2] type 00 class 0x088000 [ 0.592169] pci 0000:ff:0c.3: [8086:6fe3] type 00 class 0x088000 [ 0.592563] pci 0000:ff:0f.0: [8086:6ff8] type 00 class 0x088000 [ 0.592994] pci 0000:ff:0f.4: [8086:6ffc] type 00 class 0x088000 [ 0.593421] pci 0000:ff:0f.5: [8086:6ffd] type 00 class 0x088000 [ 0.593839] pci 0000:ff:0f.6: [8086:6ffe] type 00 class 0x088000 [ 0.594270] pci 0000:ff:10.0: [8086:6f1d] type 00 class 0x088000 [ 0.594692] pci 0000:ff:10.1: [8086:6f34] type 00 class 0x110100 [ 0.595336] pci 0000:ff:10.5: [8086:6f1e] type 00 class 0x088000 [ 0.595757] pci 0000:ff:10.6: [8086:6f7d] type 00 class 0x110100 [ 0.596176] pci 0000:ff:10.7: [8086:6f1f] type 00 class 0x088000 [ 0.596542] pci 0000:ff:12.0: [8086:6fa0] type 00 class 0x088000 [ 0.596794] pci 0000:ff:12.1: [8086:6f30] type 00 class 0x110100 [ 0.597251] pci 0000:ff:13.0: [8086:6fa8] type 00 class 0x088000 [ 0.597719] pci 0000:ff:13.1: [8086:6f71] type 00 class 0x088000 [ 0.598180] pci 0000:ff:13.2: [8086:6faa] type 00 class 0x088000 [ 0.598580] pci 0000:ff:13.3: [8086:6fab] type 00 class 0x088000 [ 0.599246] pci 0000:ff:13.4: [8086:6fac] type 00 class 0x088000 [ 0.599711] pci 0000:ff:13.5: [8086:6fad] type 00 class 0x088000 [ 0.600164] pci 0000:ff:13.6: [8086:6fae] type 00 class 0x088000 [ 0.600538] pci 0000:ff:13.7: [8086:6faf] type 00 class 0x088000 [ 0.600966] pci 0000:ff:14.0: [8086:6fb0] type 00 class 0x088000 [ 0.601446] pci 0000:ff:14.1: [8086:6fb1] type 00 class 0x088000 [ 0.602110] pci 0000:ff:14.2: [8086:6fb2] type 00 class 0x088000 [ 0.602577] pci 0000:ff:14.3: [8086:6fb3] type 00 class 0x088000 [ 0.603241] pci 0000:ff:14.4: [8086:6fbc] type 00 class 0x088000 [ 0.603668] pci 0000:ff:14.5: [8086:6fbd] type 00 class 0x088000 [ 0.604094] pci 0000:ff:14.6: [8086:6fbe] type 00 class 0x088000 [ 0.604517] pci 0000:ff:14.7: [8086:6fbf] type 00 class 0x088000 [ 0.604945] pci 0000:ff:15.0: [8086:6fb4] type 00 class 0x088000 [ 0.605409] pci 0000:ff:15.1: [8086:6fb5] type 00 class 0x088000 [ 0.605871] pci 0000:ff:15.2: [8086:6fb6] type 00 class 0x088000 [ 0.606337] pci 0000:ff:15.3: [8086:6fb7] type 00 class 0x088000 [ 0.607047] pci 0000:ff:1e.0: [8086:6f98] type 00 class 0x088000 [ 0.607470] pci 0000:ff:1e.1: [8086:6f99] type 00 class 0x088000 [ 0.607895] pci 0000:ff:1e.2: [8086:6f9a] type 00 class 0x088000 [ 0.608321] pci 0000:ff:1e.3: [8086:6fc0] type 00 class 0x088000 [ 0.608568] pci 0000:ff:1e.4: [8086:6f9c] type 00 class 0x088000 [ 0.609001] pci 0000:ff:1f.0: [8086:6f88] type 00 class 0x088000 [ 0.609426] pci 0000:ff:1f.2: [8086:6f8a] type 00 class 0x088000 [ 0.610051] pci_bus 0000:ff: on NUMA node 0 [ 0.614537] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-fe]) [ 0.614665] acpi PNP0A08:00: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI HPX-Type3] [ 0.615147] acpi PNP0A08:00: _OSC: platform does not support [PME LTR] [ 0.615460] acpi PNP0A08:00: _OSC: OS now controls [PCIeCapability] [ 0.615581] acpi PNP0A08:00: FADT indicates ASPM is unsupported, using BIOS configuration [ 0.616059] PCI host bridge to bus 0000:00 [ 0.616178] pci_bus 0000:00: root bus resource [io 0x0000-0x0cf7 window] [ 0.616237] pci_bus 0000:00: root bus resource [io 0x1000-0xffff window] [ 0.616357] pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff window] [ 0.616502] pci_bus 0000:00: root bus resource [mem 0x90000000-0xfbffbfff window] [ 0.616646] pci_bus 0000:00: root bus resource [bus 00-fe] [ 0.616824] pci 0000:00:00.0: [8086:6f00] type 00 class 0x060000 [ 0.617456] pci 0000:00:01.0: [8086:6f02] type 01 class 0x060400 [ 0.618178] pci 0000:00:01.0: PME# supported from D0 D3hot D3cold [ 0.618487] pci 0000:00:01.1: [8086:6f03] type 01 class 0x060400 [ 0.619215] pci 0000:00:01.1: PME# supported from D0 D3hot D3cold [ 0.619507] pci 0000:00:02.0: [8086:6f04] type 01 class 0x060400 [ 0.620018] pci 0000:00:02.0: PME# supported from D0 D3hot D3cold [ 0.620407] pci 0000:00:02.2: [8086:6f06] type 01 class 0x060400 [ 0.620917] pci 0000:00:02.2: PME# supported from D0 D3hot D3cold [ 0.621288] pci 0000:00:03.0: [8086:6f08] type 01 class 0x060400 [ 0.621810] pci 0000:00:03.0: PME# supported from D0 D3hot D3cold [ 0.622172] pci 0000:00:03.2: [8086:6f0a] type 01 class 0x060400 [ 0.622832] pci 0000:00:03.2: PME# supported from D0 D3hot D3cold [ 0.623210] pci 0000:00:05.0: [8086:6f28] type 00 class 0x088000 [ 0.623690] pci 0000:00:05.1: [8086:6f29] type 00 class 0x088000 [ 0.624313] pci 0000:00:05.2: [8086:6f2a] type 00 class 0x088000 [ 0.624972] pci 0000:00:14.0: [8086:8c31] type 00 class 0x0c0330 [ 0.625188] pci 0000:00:14.0: reg 0x10: [mem 0xfb600000-0xfb60ffff 64bit] [ 0.625575] pci 0000:00:14.0: PME# supported from D3hot D3cold [ 0.625919] pci 0000:00:16.0: [8086:8c3a] type 00 class 0x078000 [ 0.626335] pci 0000:00:16.0: reg 0x10: [mem 0xfb617000-0xfb61700f 64bit] [ 0.626800] pci 0000:00:16.0: PME# supported from D0 D3hot D3cold [ 0.627104] pci 0000:00:16.1: [8086:8c3b] type 00 class 0x078000 [ 0.627322] pci 0000:00:16.1: reg 0x10: [mem 0xfb616000-0xfb61600f 64bit] [ 0.627780] pci 0000:00:16.1: PME# supported from D0 D3hot D3cold [ 0.628141] pci 0000:00:1a.0: [8086:8c2d] type 00 class 0x0c0320 [ 0.628313] pci 0000:00:1a.0: reg 0x10: [mem 0xfb614000-0xfb6143ff] [ 0.628842] pci 0000:00:1a.0: PME# supported from D0 D3hot D3cold [ 0.629156] pci 0000:00:1c.0: [8086:8c10] type 01 class 0x060400 [ 0.629658] pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold [ 0.630065] pci 0000:00:1c.0: Enabling MPC IRBNCE [ 0.630187] pci 0000:00:1c.0: Intel PCH root port ACS workaround enabled [ 0.638409] pci 0000:00:1c.1: [8086:8c12] type 01 class 0x060400 [ 0.638965] pci 0000:00:1c.1: PME# supported from D0 D3hot D3cold [ 0.639161] pci 0000:00:1c.1: Enabling MPC IRBNCE [ 0.640251] pci 0000:00:1c.1: Intel PCH root port ACS workaround enabled [ 0.640555] pci 0000:00:1c.3: [8086:8c16] type 01 class 0x060400 [ 0.641105] pci 0000:00:1c.3: PME# supported from D0 D3hot D3cold [ 0.641105] pci 0000:00:1c.3: Enabling MPC IRBNCE [ 0.641105] pci 0000:00:1c.3: Intel PCH root port ACS workaround enabled [ 0.641105] pci 0000:00:1c.4: [8086:8c18] type 01 class 0x060400 [ 0.641232] pci 0000:00:1c.4: PME# supported from D0 D3hot D3cold [ 0.641232] pci 0000:00:1c.4: Enabling MPC IRBNCE [ 0.641232] pci 0000:00:1c.4: Intel PCH root port ACS workaround enabled [ 0.641232] pci 0000:00:1d.0: [8086:8c26] type 00 class 0x0c0320 [ 0.641232] pci 0000:00:1d.0: reg 0x10: [mem 0xfb613000-0xfb6133ff] [ 0.642670] pci 0000:00:1d.0: PME# supported from D0 D3hot D3cold [ 0.643002] pci 0000:00:1f.0: [8086:8c54] type 00 class 0x060100 [ 0.643764] pci 0000:00:1f.2: [8086:8c02] type 00 class 0x010601 [ 0.643957] pci 0000:00:1f.2: reg 0x10: [io 0xf070-0xf077] [ 0.644114] pci 0000:00:1f.2: reg 0x14: [io 0xf060-0xf063] [ 0.644273] pci 0000:00:1f.2: reg 0x18: [io 0xf050-0xf057] [ 0.644430] pci 0000:00:1f.2: reg 0x1c: [io 0xf040-0xf043] [ 0.644593] pci 0000:00:1f.2: reg 0x20: [io 0xf020-0xf03f] [ 0.644750] pci 0000:00:1f.2: reg 0x24: [mem 0xfb612000-0xfb6127ff] [ 0.645058] pci 0000:00:1f.2: PME# supported from D3hot [ 0.645342] pci 0000:00:1f.3: [8086:8c22] type 00 class 0x0c0500 [ 0.645557] pci 0000:00:1f.3: reg 0x10: [mem 0xfb611000-0xfb6110ff 64bit] [ 0.645800] pci 0000:00:1f.3: reg 0x20: [io 0xf000-0xf01f] [ 0.646181] pci 0000:00:1f.6: [8086:8c24] type 00 class 0x118000 [ 0.646334] pci 0000:00:1f.6: reg 0x10: [mem 0xfb610000-0xfb610fff 64bit] [ 0.647041] pci 0000:00:01.0: PCI bridge to [bus 01] [ 0.647333] pci 0000:00:01.1: PCI bridge to [bus 02] [ 0.647662] pci 0000:03:00.0: [8086:6f50] type 00 class 0x088000 [ 0.647872] pci 0000:03:00.0: reg 0x10: [mem 0xfb506000-0xfb507fff 64bit] [ 0.648645] pci 0000:03:00.1: [8086:6f51] type 00 class 0x088000 [ 0.648856] pci 0000:03:00.1: reg 0x10: [mem 0xfb504000-0xfb505fff 64bit] [ 0.649565] pci 0000:03:00.2: [8086:6f52] type 00 class 0x088000 [ 0.649776] pci 0000:03:00.2: reg 0x10: [mem 0xfb502000-0xfb503fff 64bit] [ 0.650476] pci 0000:03:00.3: [8086:6f53] type 00 class 0x088000 [ 0.650687] pci 0000:03:00.3: reg 0x10: [mem 0xfb500000-0xfb501fff 64bit] [ 0.651406] pci 0000:00:02.0: PCI bridge to [bus 03] [ 0.651541] pci 0000:00:02.0: bridge window [mem 0xfb500000-0xfb5fffff] [ 0.651876] pci 0000:04:00.0: [8086:15ac] type 00 class 0x020000 [ 0.652087] pci 0000:04:00.0: reg 0x10: [mem 0xfbc00000-0xfbdfffff 64bit pref] [ 0.652371] pci 0000:04:00.0: reg 0x20: [mem 0xfbe04000-0xfbe07fff 64bit pref] [ 0.652555] pci 0000:04:00.0: reg 0x30: [mem 0xfb480000-0xfb4fffff pref] [ 0.652902] pci 0000:04:00.0: PME# supported from D0 D3hot D3cold [ 0.653121] pci 0000:04:00.0: reg 0x184: [mem 0x00000000-0x00003fff 64bit] [ 0.653236] pci 0000:04:00.0: VF(n) BAR0 space: [mem 0x00000000-0x000fffff 64bit] (contains BAR0 for 64 VFs) [ 0.653441] pci 0000:04:00.0: reg 0x190: [mem 0x00000000-0x00003fff 64bit] [ 0.653561] pci 0000:04:00.0: VF(n) BAR3 space: [mem 0x00000000-0x000fffff 64bit] (contains BAR3 for 64 VFs) [ 0.654132] pci 0000:04:00.1: [8086:15ac] type 00 class 0x020000 [ 0.654334] pci 0000:04:00.1: reg 0x10: [mem 0xfba00000-0xfbbfffff 64bit pref] [ 0.654619] pci 0000:04:00.1: reg 0x20: [mem 0xfbe00000-0xfbe03fff 64bit pref] [ 0.654803] pci 0000:04:00.1: reg 0x30: [mem 0xfb400000-0xfb47ffff pref] [ 0.655149] pci 0000:04:00.1: PME# supported from D0 D3hot D3cold [ 0.655320] pci 0000:04:00.1: reg 0x184: [mem 0x00000000-0x00003fff 64bit] [ 0.655447] pci 0000:04:00.1: VF(n) BAR0 space: [mem 0x00000000-0x000fffff 64bit] (contains BAR0 for 64 VFs) [ 0.655650] pci 0000:04:00.1: reg 0x190: [mem 0x00000000-0x00003fff 64bit] [ 0.655770] pci 0000:04:00.1: VF(n) BAR3 space: [mem 0x00000000-0x000fffff 64bit] (contains BAR3 for 64 VFs) [ 0.656317] pci 0000:00:02.2: PCI bridge to [bus 04] [ 0.656451] pci 0000:00:02.2: bridge window [mem 0xfb400000-0xfb4fffff] [ 0.656589] pci 0000:00:02.2: bridge window [mem 0xfba00000-0xfbefffff 64bit pref] [ 0.656877] pci 0000:00:03.0: PCI bridge to [bus 05] [ 0.657165] pci 0000:00:03.2: PCI bridge to [bus 06] [ 0.657481] pci 0000:07:00.0: working around ROM BAR overlap defect [ 0.657601] pci 0000:07:00.0: [8086:1533] type 00 class 0x020000 [ 0.657806] pci 0000:07:00.0: reg 0x10: [mem 0xfb300000-0xfb37ffff] [ 0.658021] pci 0000:07:00.0: reg 0x18: [io 0xe000-0xe01f] [ 0.658191] pci 0000:07:00.0: reg 0x1c: [mem 0xfb380000-0xfb383fff] [ 0.658642] pci 0000:07:00.0: PME# supported from D0 D3hot D3cold [ 0.659108] pci 0000:00:1c.0: PCI bridge to [bus 07] [ 0.659237] pci 0000:00:1c.0: bridge window [io 0xe000-0xefff] [ 0.659365] pci 0000:00:1c.0: bridge window [mem 0xfb300000-0xfb3fffff] [ 0.659722] pci 0000:08:00.0: working around ROM BAR overlap defect [ 0.659841] pci 0000:08:00.0: [8086:1533] type 00 class 0x020000 [ 0.660046] pci 0000:08:00.0: reg 0x10: [mem 0xfb200000-0xfb27ffff] [ 0.660257] pci 0000:08:00.0: reg 0x18: [io 0xd000-0xd01f] [ 0.660422] pci 0000:08:00.0: reg 0x1c: [mem 0xfb280000-0xfb283fff] [ 0.660949] pci 0000:08:00.0: PME# supported from D0 D3hot D3cold [ 0.661410] pci 0000:00:1c.1: PCI bridge to [bus 08] [ 0.661535] pci 0000:00:1c.1: bridge window [io 0xd000-0xdfff] [ 0.661663] pci 0000:00:1c.1: bridge window [mem 0xfb200000-0xfb2fffff] [ 0.661998] pci 0000:09:00.0: [1a03:1150] type 01 class 0x060400 [ 0.662391] pci 0000:09:00.0: enabling Extended Tags [ 0.662728] pci 0000:09:00.0: supports D1 D2 [ 0.662841] pci 0000:09:00.0: PME# supported from D0 D1 D2 D3hot D3cold [ 0.663195] pci 0000:00:1c.3: PCI bridge to [bus 09-0a] [ 0.663247] pci 0000:00:1c.3: bridge window [io 0xc000-0xcfff] [ 0.663374] pci 0000:00:1c.3: bridge window [mem 0xfa000000-0xfb0fffff] [ 0.663681] pci_bus 0000:0a: extended config space not accessible [ 0.663851] pci 0000:0a:00.0: [1a03:2000] type 00 class 0x030000 [ 0.664055] pci 0000:0a:00.0: reg 0x10: [mem 0xfa000000-0xfaffffff] [ 0.664221] pci 0000:0a:00.0: reg 0x14: [mem 0xfb000000-0xfb01ffff] [ 0.664283] pci 0000:0a:00.0: reg 0x18: [io 0xc000-0xc07f] [ 0.664634] pci 0000:0a:00.0: Video device with shadowed ROM at [mem 0x000c0000-0x000dffff] [ 0.664928] pci 0000:0a:00.0: supports D1 D2 [ 0.665041] pci 0000:0a:00.0: PME# supported from D0 D1 D2 D3hot D3cold [ 0.665481] pci 0000:09:00.0: PCI bridge to [bus 0a] [ 0.665618] pci 0000:09:00.0: bridge window [io 0xc000-0xcfff] [ 0.665748] pci 0000:09:00.0: bridge window [mem 0xfa000000-0xfb0fffff] [ 0.666141] pci 0000:0b:00.0: [8086:1521] type 00 class 0x020000 [ 0.666317] pci 0000:0b:00.0: reg 0x10: [mem 0xfb160000-0xfb17ffff] [ 0.666524] pci 0000:0b:00.0: reg 0x18: [io 0xb060-0xb07f] [ 0.666685] pci 0000:0b:00.0: reg 0x1c: [mem 0xfb18c000-0xfb18ffff] [ 0.667194] pci 0000:0b:00.0: PME# supported from D0 D3hot D3cold [ 0.667351] pci 0000:0b:00.0: reg 0x184: [mem 0x00000000-0x00003fff 64bit pref] [ 0.667533] pci 0000:0b:00.0: VF(n) BAR0 space: [mem 0x00000000-0x0001ffff 64bit pref] (contains BAR0 for 8 VFs) [ 0.667750] pci 0000:0b:00.0: reg 0x190: [mem 0x00000000-0x00003fff 64bit pref] [ 0.667894] pci 0000:0b:00.0: VF(n) BAR3 space: [mem 0x00000000-0x0001ffff 64bit pref] (contains BAR3 for 8 VFs) [ 0.668459] pci 0000:0b:00.1: [8086:1521] type 00 class 0x020000 [ 0.668659] pci 0000:0b:00.1: reg 0x10: [mem 0xfb140000-0xfb15ffff] [ 0.668873] pci 0000:0b:00.1: reg 0x18: [io 0xb040-0xb05f] [ 0.669034] pci 0000:0b:00.1: reg 0x1c: [mem 0xfb188000-0xfb18bfff] [ 0.669541] pci 0000:0b:00.1: PME# supported from D0 D3hot D3cold [ 0.669770] pci 0000:0b:00.1: reg 0x184: [mem 0x00000000-0x00003fff 64bit pref] [ 0.669914] pci 0000:0b:00.1: VF(n) BAR0 space: [mem 0x00000000-0x0001ffff 64bit pref] (contains BAR0 for 8 VFs) [ 0.670131] pci 0000:0b:00.1: reg 0x190: [mem 0x00000000-0x00003fff 64bit pref] [ 0.670236] pci 0000:0b:00.1: VF(n) BAR3 space: [mem 0x00000000-0x0001ffff 64bit pref] (contains BAR3 for 8 VFs) [ 0.670753] pci 0000:0b:00.2: [8086:1521] type 00 class 0x020000 [ 0.670952] pci 0000:0b:00.2: reg 0x10: [mem 0xfb120000-0xfb13ffff] [ 0.671160] pci 0000:0b:00.2: reg 0x18: [io 0xb020-0xb03f] [ 0.671282] pci 0000:0b:00.2: reg 0x1c: [mem 0xfb184000-0xfb187fff] [ 0.671792] pci 0000:0b:00.2: PME# supported from D0 D3hot D3cold [ 0.672019] pci 0000:0b:00.2: reg 0x184: [mem 0x00000000-0x00003fff 64bit pref] [ 0.672163] pci 0000:0b:00.2: VF(n) BAR0 space: [mem 0x00000000-0x0001ffff 64bit pref] (contains BAR0 for 8 VFs) [ 0.672300] pci 0000:0b:00.2: reg 0x190: [mem 0x00000000-0x00003fff 64bit pref] [ 0.672444] pci 0000:0b:00.2: VF(n) BAR3 space: [mem 0x00000000-0x0001ffff 64bit pref] (contains BAR3 for 8 VFs) [ 0.672971] pci 0000:0b:00.3: [8086:1521] type 00 class 0x020000 [ 0.673170] pci 0000:0b:00.3: reg 0x10: [mem 0xfb100000-0xfb11ffff] [ 0.673326] pci 0000:0b:00.3: reg 0x18: [io 0xb000-0xb01f] [ 0.673486] pci 0000:0b:00.3: reg 0x1c: [mem 0xfb180000-0xfb183fff] [ 0.673990] pci 0000:0b:00.3: PME# supported from D0 D3hot D3cold [ 0.674224] pci 0000:0b:00.3: reg 0x184: [mem 0x00000000-0x00003fff 64bit pref] [ 0.674369] pci 0000:0b:00.3: VF(n) BAR0 space: [mem 0x00000000-0x0001ffff 64bit pref] (contains BAR0 for 8 VFs) [ 0.674586] pci 0000:0b:00.3: reg 0x190: [mem 0x00000000-0x00003fff 64bit pref] [ 0.674730] pci 0000:0b:00.3: VF(n) BAR3 space: [mem 0x00000000-0x0001ffff 64bit pref] (contains BAR3 for 8 VFs) [ 0.675305] pci 0000:00:1c.4: PCI bridge to [bus 0b] [ 0.675438] pci 0000:00:1c.4: bridge window [io 0xb000-0xbfff] [ 0.675566] pci 0000:00:1c.4: bridge window [mem 0xfb100000-0xfb1fffff] [ 0.675705] pci 0000:00:1c.4: bridge has subordinate 0b but max busn 0c [ 0.676168] pci_bus 0000:00: on NUMA node 0 [ 0.676267] xen: registering gsi 13 triggering 1 polarity 0 [ 0.677232] ACPI: PCI: Interrupt link LNKA configured for IRQ 11 [ 0.677430] ACPI: PCI: Interrupt link LNKB configured for IRQ 10 [ 0.677618] ACPI: PCI: Interrupt link LNKC configured for IRQ 5 [ 0.677806] ACPI: PCI: Interrupt link LNKD configured for IRQ 11 [ 0.677994] ACPI: PCI: Interrupt link LNKE configured for IRQ 0 [ 0.678113] ACPI: PCI: Interrupt link LNKE disabled [ 0.678308] ACPI: PCI: Interrupt link LNKF configured for IRQ 0 [ 0.678426] ACPI: PCI: Interrupt link LNKF disabled [ 0.678608] ACPI: PCI: Interrupt link LNKG configured for IRQ 0 [ 0.678726] ACPI: PCI: Interrupt link LNKG disabled [ 0.678908] ACPI: PCI: Interrupt link LNKH configured for IRQ 0 [ 0.679026] ACPI: PCI: Interrupt link LNKH disabled [ 0.679293] xen:balloon: Initialising balloon driver [ 0.680327] iommu: Default domain type: Translated [ 0.687239] iommu: DMA domain TLB invalidation policy: lazy mode [ 0.687424] SCSI subsystem initialized [ 0.687551] libata version 3.00 loaded. [ 0.687551] ACPI: bus type USB registered [ 0.687551] usbcore: registered new interface driver usbfs [ 0.687555] usbcore: registered new interface driver hub [ 0.687676] usbcore: registered new device driver usb [ 0.687803] pps_core: LinuxPPS API ver. 1 registered [ 0.688236] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti [ 0.688387] PTP clock support registered [ 0.688523] Advanced Linux Sound Architecture Driver Initialized. [ 0.688529] NetLabel: Initializing [ 0.688645] NetLabel: domain hash size = 128 [ 0.688768] NetLabel: protocols = UNLABELED CIPSOv4 CALIPSO [ 0.689254] NetLabel: unlabeled traffic allowed by default [ 0.689391] PCI: Using ACPI for IRQ routing [ 0.724183] PCI: pci_cache_line_size set to 64 bytes [ 0.724945] e820: reserve RAM buffer [mem 0x0009a000-0x0009ffff] [ 0.724948] e820: reserve RAM buffer [mem 0x20066000-0x23ffffff] [ 0.725273] pci 0000:0a:00.0: vgaarb: setting as boot VGA device [ 0.725395] pci 0000:0a:00.0: vgaarb: bridge control possible [ 0.725545] pci 0000:0a:00.0: vgaarb: VGA device added: decodes=io+mem,owns=io+mem,locks=none [ 0.725545] vgaarb: loaded [ 0.727235] clocksource: Switched to clocksource tsc-early [ 0.727482] VFS: Disk quotas dquot_6.6.0 [ 0.727607] VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes) [ 0.727753] hugetlbfs: disabling because there are no supported hugepage sizes [ 0.727918] pnp: PnP ACPI init [ 0.728401] xen: registering gsi 8 triggering 1 polarity 0 [ 0.728596] system 00:01: [io 0x0500-0x057f] has been reserved [ 0.728721] system 00:01: [io 0x0400-0x047f] has been reserved [ 0.728840] system 00:01: [io 0x0580-0x059f] has been reserved [ 0.728958] system 00:01: [io 0x0600-0x061f] has been reserved [ 0.729076] system 00:01: [io 0x0880-0x0883] has been reserved [ 0.729194] system 00:01: [io 0x0800-0x081f] has been reserved [ 0.729332] system 00:01: [mem 0xfed1c000-0xfed3ffff] could not be reserved [ 0.729454] system 00:01: [mem 0xfed45000-0xfed8bfff] has been reserved [ 0.729574] system 00:01: [mem 0xff000000-0xffffffff] has been reserved [ 0.729693] system 00:01: [mem 0xfee00000-0xfeefffff] has been reserved [ 0.729813] system 00:01: [mem 0xfed12000-0xfed1200f] has been reserved [ 0.729933] system 00:01: [mem 0xfed12010-0xfed1201f] has been reserved [ 0.730052] system 00:01: [mem 0xfed1b000-0xfed1bfff] has been reserved [ 0.730477] system 00:02: [io 0x0a00-0x0a0f] has been reserved [ 0.730601] system 00:02: [io 0x0a10-0x0a1f] has been reserved [ 0.730726] system 00:02: [io 0x0a20-0x0a2f] has been reserved [ 0.730844] system 00:02: [io 0x0a30-0x0a3f] has been reserved [ 0.730962] system 00:02: [io 0x0a40-0x0a4f] has been reserved [ 0.731408] xen: registering gsi 4 triggering 1 polarity 0 [ 0.731413] Already setup the GSI :4 [ 0.731525] pnp 00:03: [dma 0 disabled] [ 0.731837] xen: registering gsi 3 triggering 1 polarity 0 [ 0.731848] pnp 00:04: [dma 0 disabled] [ 0.732438] pnp: PnP ACPI: found 5 devices [ 0.761565] PM-Timer failed consistency check (0xffffff) - aborting. [ 0.761758] NET: Registered PF_INET protocol family [ 0.761919] IP idents hash table entries: 8192 (order: 4, 65536 bytes, linear) [ 0.762325] tcp_listen_portaddr_hash hash table entries: 256 (order: 0, 4096 bytes, linear) [ 0.762481] Table-perturb hash table entries: 65536 (order: 6, 262144 bytes, linear) [ 0.762633] TCP established hash table entries: 4096 (order: 3, 32768 bytes, linear) [ 0.762786] TCP bind hash table entries: 4096 (order: 5, 131072 bytes, linear) [ 0.762957] TCP: Hash tables configured (established 4096 bind 4096) [ 0.763100] UDP hash table entries: 256 (order: 1, 8192 bytes, linear) [ 0.763221] UDP-Lite hash table entries: 256 (order: 1, 8192 bytes, linear) [ 0.763424] NET: Registered PF_UNIX/PF_LOCAL protocol family [ 0.763796] RPC: Registered named UNIX socket transport module. [ 0.763924] RPC: Registered udp transport module. [ 0.764066] RPC: Registered tcp transport module. [ 0.764179] RPC: Registered tcp NFSv4.1 backchannel transport module. [ 0.764737] pci 0000:00:1c.4: bridge window [mem 0x00100000-0x000fffff 64bit pref] to [bus 0b] add_size 100000 add_align 100000 [ 0.764909] clipped [mem size 0x00000000 64bit pref] to [mem size 0xfffffffffffa0000 64bit pref] for e820 entry [mem 0x0009ac00-0x000fffff] [ 0.765073] clipped [mem size 0x00020000 64bit pref] to [mem size 0xfffffffffffc0000 64bit pref] for e820 entry [mem 0x0009ac00-0x000fffff] [ 0.765245] pci 0000:00:1c.4: BAR 15: assigned [mem 0x90000000-0x900fffff 64bit pref] [ 0.765407] pci 0000:00:01.0: PCI bridge to [bus 01] [ 0.765583] pci 0000:00:01.1: PCI bridge to [bus 02] [ 0.765755] pci 0000:00:02.0: PCI bridge to [bus 03] [ 0.765894] pci 0000:00:02.0: bridge window [mem 0xfb500000-0xfb5fffff] [ 0.766056] pci 0000:04:00.0: BAR 7: no space for [mem size 0x00100000 64bit] [ 0.766178] pci 0000:04:00.0: BAR 7: failed to assign [mem size 0x00100000 64bit] [ 0.766346] pci 0000:04:00.0: BAR 10: no space for [mem size 0x00100000 64bit] [ 0.766492] pci 0000:04:00.0: BAR 10: failed to assign [mem size 0x00100000 64bit] [ 0.766637] pci 0000:04:00.1: BAR 7: no space for [mem size 0x00100000 64bit] [ 0.766767] pci 0000:04:00.1: BAR 7: failed to assign [mem size 0x00100000 64bit] [ 0.766911] pci 0000:04:00.1: BAR 10: no space for [mem size 0x00100000 64bit] [ 0.767054] pci 0000:04:00.1: BAR 10: failed to assign [mem size 0x00100000 64bit] [ 0.767200] pci 0000:04:00.0: BAR 7: no space for [mem size 0x00100000 64bit] [ 0.767349] pci 0000:04:00.0: BAR 7: failed to assign [mem size 0x00100000 64bit] [ 0.767496] pci 0000:04:00.0: BAR 10: no space for [mem size 0x00100000 64bit] [ 0.767640] pci 0000:04:00.0: BAR 10: failed to assign [mem size 0x00100000 64bit] [ 0.767785] pci 0000:04:00.1: BAR 7: no space for [mem size 0x00100000 64bit] [ 0.767906] pci 0000:04:00.1: BAR 7: failed to assign [mem size 0x00100000 64bit] [ 0.768051] pci 0000:04:00.1: BAR 10: no space for [mem size 0x00100000 64bit] [ 0.768197] pci 0000:04:00.1: BAR 10: failed to assign [mem size 0x00100000 64bit] [ 0.768354] pci 0000:00:02.2: PCI bridge to [bus 04] [ 0.768489] pci 0000:00:02.2: bridge window [mem 0xfb400000-0xfb4fffff] [ 0.768622] pci 0000:00:02.2: bridge window [mem 0xfba00000-0xfbefffff 64bit pref] [ 0.768792] pci 0000:00:03.0: PCI bridge to [bus 05] [ 0.768964] pci 0000:00:03.2: PCI bridge to [bus 06] [ 0.769136] pci 0000:00:1c.0: PCI bridge to [bus 07] [ 0.769263] pci 0000:00:1c.0: bridge window [io 0xe000-0xefff] [ 0.769419] pci 0000:00:1c.0: bridge window [mem 0xfb300000-0xfb3fffff] [ 0.769587] pci 0000:00:1c.1: PCI bridge to [bus 08] [ 0.769706] pci 0000:00:1c.1: bridge window [io 0xd000-0xdfff] [ 0.769844] pci 0000:00:1c.1: bridge window [mem 0xfb200000-0xfb2fffff] [ 0.770005] pci 0000:09:00.0: PCI bridge to [bus 0a] [ 0.770124] pci 0000:09:00.0: bridge window [io 0xc000-0xcfff] [ 0.770280] pci 0000:09:00.0: bridge window [mem 0xfa000000-0xfb0fffff] [ 0.770462] pci 0000:00:1c.3: PCI bridge to [bus 09-0a] [ 0.770584] pci 0000:00:1c.3: bridge window [io 0xc000-0xcfff] [ 0.770722] pci 0000:00:1c.3: bridge window [mem 0xfa000000-0xfb0fffff] [ 0.770888] pci 0000:0b:00.0: BAR 7: assigned [mem 0x90000000-0x9001ffff 64bit pref] [ 0.771058] pci 0000:0b:00.0: BAR 10: assigned [mem 0x90020000-0x9003ffff 64bit pref] [ 0.771211] pci 0000:0b:00.1: BAR 7: assigned [mem 0x90040000-0x9005ffff 64bit pref] [ 0.771386] pci 0000:0b:00.1: BAR 10: assigned [mem 0x90060000-0x9007ffff 64bit pref] [ 0.771540] pci 0000:0b:00.2: BAR 7: assigned [mem 0x90080000-0x9009ffff 64bit pref] [ 0.771693] pci 0000:0b:00.2: BAR 10: assigned [mem 0x900a0000-0x900bffff 64bit pref] [ 0.771845] pci 0000:0b:00.3: BAR 7: assigned [mem 0x900c0000-0x900dffff 64bit pref] [ 0.771997] pci 0000:0b:00.3: BAR 10: assigned [mem 0x900e0000-0x900fffff 64bit pref] [ 0.772151] pci 0000:00:1c.4: PCI bridge to [bus 0b] [ 0.772294] pci 0000:00:1c.4: bridge window [io 0xb000-0xbfff] [ 0.772446] pci 0000:00:1c.4: bridge window [mem 0xfb100000-0xfb1fffff] [ 0.772579] pci 0000:00:1c.4: bridge window [mem 0x90000000-0x900fffff 64bit pref] [ 0.772752] pci_bus 0000:00: Some PCI device resources are unassigned, try booting with pci=realloc [ 0.772901] pci_bus 0000:00: resource 4 [io 0x0000-0x0cf7 window] [ 0.773020] pci_bus 0000:00: resource 5 [io 0x1000-0xffff window] [ 0.773138] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff window] [ 0.773274] pci_bus 0000:00: resource 7 [mem 0x90000000-0xfbffbfff window] [ 0.773411] pci_bus 0000:03: resource 1 [mem 0xfb500000-0xfb5fffff] [ 0.773532] pci_bus 0000:04: resource 1 [mem 0xfb400000-0xfb4fffff] [ 0.773652] pci_bus 0000:04: resource 2 [mem 0xfba00000-0xfbefffff 64bit pref] [ 0.773822] pci_bus 0000:07: resource 0 [io 0xe000-0xefff] [ 0.773937] pci_bus 0000:07: resource 1 [mem 0xfb300000-0xfb3fffff] [ 0.774056] pci_bus 0000:08: resource 0 [io 0xd000-0xdfff] [ 0.774172] pci_bus 0000:08: resource 1 [mem 0xfb200000-0xfb2fffff] [ 0.774311] pci_bus 0000:09: resource 0 [io 0xc000-0xcfff] [ 0.774437] pci_bus 0000:09: resource 1 [mem 0xfa000000-0xfb0fffff] [ 0.774556] pci_bus 0000:0a: resource 0 [io 0xc000-0xcfff] [ 0.774671] pci_bus 0000:0a: resource 1 [mem 0xfa000000-0xfb0fffff] [ 0.774790] pci_bus 0000:0b: resource 0 [io 0xb000-0xbfff] [ 0.774906] pci_bus 0000:0b: resource 1 [mem 0xfb100000-0xfb1fffff] [ 0.775024] pci_bus 0000:0b: resource 2 [mem 0x90000000-0x900fffff 64bit pref] [ 0.775612] pci 0000:00:05.0: disabled boot interrupts on device [8086:6f28] [ 0.775835] xen: registering gsi 19 triggering 0 polarity 1 [ 0.775861] xen: --> pirq=19 -> irq=19 (gsi=19) [ 0.784663] xen: registering gsi 18 triggering 0 polarity 1 [ 0.784684] xen: --> pirq=18 -> irq=18 (gsi=18) [ 0.800475] pci 0000:00:1a.0: quirk_usb_early_handoff+0x0/0x720 took 15492 usecs [ 0.800719] xen: registering gsi 18 triggering 0 polarity 1 [ 0.800725] Already setup the GSI :18 [ 0.816573] pci 0000:00:1d.0: quirk_usb_early_handoff+0x0/0x720 took 15536 usecs [ 0.816785] pci 0000:04:00.0: CLS mismatch (64 != 32), using 64 bytes [ 0.816927] PCI-DMA: Using software bounce buffering for IO (SWIOTLB) [ 0.817001] Unpacking initramfs... [ 0.817046] software IO TLB: mapped [mem 0x000000001b180000-0x000000001f180000] (64MB) [ 0.817411] kvm: no hardware support for 'kvm_intel' [ 0.825267] has_svm: not amd or hygon [ 0.825398] kvm: no hardware support for 'kvm_amd' [ 0.825517] clocksource: tsc: mask: 0xffffffffffffffff max_cycles: 0x1fb62f12e8c, max_idle_ns: 440795238402 ns [ 0.826108] clocksource: Switched to clocksource tsc [ 0.828571] Initialise system trusted keyrings [ 0.828863] workingset: timestamp_bits=62 max_order=17 bucket_order=0 [ 0.830309] NFS: Registering the id_resolver key type [ 0.830433] Key type id_resolver registered [ 0.830544] Key type id_legacy registered [ 0.830753] 9p: Installing v9fs 9p2000 file system support [ 0.844489] Key type asymmetric registered [ 0.844616] Asymmetric key parser 'x509' registered [ 0.844752] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 251) [ 0.844908] io scheduler mq-deadline registered [ 0.845032] io scheduler kyber registered [ 0.845964] xen: registering gsi 16 triggering 0 polarity 1 [ 0.845996] xen: --> pirq=16 -> irq=16 (gsi=16) [ 0.846521] xen: registering gsi 16 triggering 0 polarity 1 [ 0.846527] Already setup the GSI :16 [ 0.847147] xen: registering gsi 16 triggering 0 polarity 1 [ 0.847152] Already setup the GSI :16 [ 0.847470] xen: registering gsi 16 triggering 0 polarity 1 [ 0.847474] Already setup the GSI :16 [ 0.847789] xen: registering gsi 16 triggering 0 polarity 1 [ 0.847793] Already setup the GSI :16 [ 0.848373] xen: registering gsi 16 triggering 0 polarity 1 [ 0.848378] Already setup the GSI :16 [ 0.848954] xen: registering gsi 16 triggering 0 polarity 1 [ 0.848959] Already setup the GSI :16 [ 0.849392] xen: registering gsi 17 triggering 0 polarity 1 [ 0.849409] xen: --> pirq=17 -> irq=17 (gsi=17) [ 0.849749] xen: registering gsi 19 triggering 0 polarity 1 [ 0.849755] Already setup the GSI :19 [ 0.850228] xen: registering gsi 16 triggering 0 polarity 1 [ 0.850234] Already setup the GSI :16 [ 0.850898] input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input0 [ 0.851124] ACPI: button: Power Button [PWRB] [ 0.851269] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input1 [ 0.851650] ACPI: button: Power Button [PWRF] [ 0.851938] Monitor-Mwait will be used to enter C-1 state [ 0.851995] Monitor-Mwait will be used to enter C-2 state [ 0.852024] ACPI: \_SB_.SCK0.CP00: Found 2 idle states [ 0.852405] ACPI: \_SB_.SCK0.CP01: Found 2 idle states [ 0.852752] ACPI: \_SB_.SCK0.CP02: Found 2 idle states [ 0.853311] ACPI: \_SB_.SCK0.CP03: Found 2 idle states [ 0.853871] ACPI: \_SB_.SCK0.CP04: Found 2 idle states [ 0.854258] ACPI: \_SB_.SCK0.CP05: Found 2 idle states [ 0.854758] ACPI: \_SB_.SCK0.CP06: Found 2 idle states [ 0.855256] ACPI: \_SB_.SCK0.CP07: Found 2 idle states [ 0.856098] xen:xen_evtchn: Event-channel device installed [ 0.856292] xen_pciback: backend is vpci [ 0.857067] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled [ 0.857379] 00:04: ttyS1 at I/O 0x2f8 (irq = 3, base_baud = 115200) is a 16550A [ 0.858166] hpet_acpi_add: no address or irqs in _CRS [ 0.858404] Non-volatile memory driver v1.3 [ 0.858517] AMD-Vi: AMD IOMMUv2 functionality not available on this system - This is not a bug. [ 0.861282] loop: module loaded [ 0.867769] ahci 0000:00:1f.2: version 3.0 [ 0.867869] xen: registering gsi 16 triggering 0 polarity 1 [ 0.867878] Already setup the GSI :16 [ 0.868215] ahci 0000:00:1f.2: AHCI 0001.0300 32 slots 6 ports 6 Gbps 0x3f impl SATA mode [ 0.868366] ahci 0000:00:1f.2: flags: 64bit ncq led clo pio ems apst [ 0.883570] scsi host0: ahci [ 0.883979] scsi host1: ahci [ 0.884362] scsi host2: ahci [ 0.884673] scsi host3: ahci [ 0.885005] scsi host4: ahci [ 0.885327] scsi host5: ahci [ 0.885471] ata1: SATA max UDMA/133 abar m2048@0xfb612000 port 0xfb612100 irq 74 [ 0.885644] ata2: SATA max UDMA/133 abar m2048@0xfb612000 port 0xfb612180 irq 74 [ 0.885788] ata3: SATA max UDMA/133 abar m2048@0xfb612000 port 0xfb612200 irq 74 [ 0.885950] ata4: SATA max UDMA/133 abar m2048@0xfb612000 port 0xfb612280 irq 74 [ 0.886094] ata5: SATA max UDMA/133 abar m2048@0xfb612000 port 0xfb612300 irq 74 [ 0.886238] ata6: SATA max UDMA/133 abar m2048@0xfb612000 port 0xfb612380 irq 74 [ 0.886670] tun: Universal TUN/TAP device driver, 1.6 [ 0.886981] e100: Intel(R) PRO/100 Network Driver [ 0.887144] e100: Copyright(c) 1999-2006 Intel Corporation [ 0.887291] sky2: driver version 1.30 [ 0.887477] xen_netfront: Initialising Xen virtual ethernet driver [ 0.887860] xen: registering gsi 18 triggering 0 polarity 1 [ 0.887869] Already setup the GSI :18 [ 0.888088] ehci-pci 0000:00:1a.0: EHCI Host Controller [ 0.888289] ehci-pci 0000:00:1a.0: new USB bus registered, assigned bus number 1 [ 0.888470] ehci-pci 0000:00:1a.0: debug port 2 [ 0.892597] ehci-pci 0000:00:1a.0: irq 18, io mem 0xfb614000 [ 0.898968] ehci-pci 0000:00:1a.0: USB 2.0 started, EHCI 1.00 [ 0.899194] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 6.01 [ 0.899343] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 0.899493] usb usb1: Product: EHCI Host Controller [ 0.899607] usb usb1: Manufacturer: Linux 6.1.95+ ehci_hcd [ 0.899723] usb usb1: SerialNumber: 0000:00:1a.0 [ 0.900017] hub 1-0:1.0: USB hub found [ 0.900142] hub 1-0:1.0: 2 ports detected [ 0.900508] xen: registering gsi 18 triggering 0 polarity 1 [ 0.900518] Already setup the GSI :18 [ 0.900708] ehci-pci 0000:00:1d.0: EHCI Host Controller [ 0.900899] ehci-pci 0000:00:1d.0: new USB bus registered, assigned bus number 2 [ 0.901084] ehci-pci 0000:00:1d.0: debug port 2 [ 0.905186] ehci-pci 0000:00:1d.0: irq 18, io mem 0xfb613000 [ 0.911967] ehci-pci 0000:00:1d.0: USB 2.0 started, EHCI 1.00 [ 0.912187] usb usb2: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 6.01 [ 0.912335] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 0.912479] usb usb2: Product: EHCI Host Controller [ 0.912593] usb usb2: Manufacturer: Linux 6.1.95+ ehci_hcd [ 0.912709] usb usb2: SerialNumber: 0000:00:1d.0 [ 0.912987] hub 2-0:1.0: USB hub found [ 0.913111] hub 2-0:1.0: 2 ports detected [ 0.913550] xen: registering gsi 19 triggering 0 polarity 1 [ 0.913559] Already setup the GSI :19 [ 0.913763] xhci_hcd 0000:00:14.0: xHCI Host Controller [ 0.914000] xhci_hcd 0000:00:14.0: new USB bus registered, assigned bus number 3 [ 0.915218] xhci_hcd 0000:00:14.0: hcc params 0x200077c1 hci version 0x100 quirks 0x0000000000009810 [ 0.915678] xhci_hcd 0000:00:14.0: xHCI Host Controller [ 0.915878] xhci_hcd 0000:00:14.0: new USB bus registered, assigned bus number 4 [ 0.916033] xhci_hcd 0000:00:14.0: Host supports USB 3.0 SuperSpeed [ 0.916245] usb usb3: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 6.01 [ 0.916392] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 0.916536] usb usb3: Product: xHCI Host Controller [ 0.916650] usb usb3: Manufacturer: Linux 6.1.95+ xhci-hcd [ 0.916765] usb usb3: SerialNumber: 0000:00:14.0 [ 0.917078] hub 3-0:1.0: USB hub found [ 0.917210] hub 3-0:1.0: 8 ports detected [ 0.918343] usb usb4: New USB device found, idVendor=1d6b, idProduct=0003, bcdDevice= 6.01 [ 0.918495] usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 0.918639] usb usb4: Product: xHCI Host Controller [ 0.918753] usb usb4: Manufacturer: Linux 6.1.95+ xhci-hcd [ 0.918875] usb usb4: SerialNumber: 0000:00:14.0 [ 0.919145] hub 4-0:1.0: USB hub found [ 0.919277] hub 4-0:1.0: 6 ports detected [ 0.920462] usbcore: registered new interface driver usblp [ 0.920606] usbcore: registered new interface driver usb-storage [ 0.920755] i8042: PNP: No PS/2 controller found. [ 0.921157] rtc_cmos 00:00: RTC can wake from S4 [ 0.921831] rtc_cmos 00:00: registered as rtc0 [ 0.922070] rtc_cmos 00:00: alarms up to one month, y3k, 114 bytes nvram [ 0.922308] device-mapper: uevent: version 1.0.3 [ 0.922332] Freeing initrd memory: 19884K [ 0.922561] device-mapper: ioctl: 4.47.0-ioctl (2022-07-28) initialised: dm-devel@redhat.com [ 0.922598] xen: registering gsi 18 triggering 0 polarity 1 [ 0.922717] intel_pstate: CPU model not supported [ 0.922722] Already setup the GSI :18 [ 0.922737] hid: raw HID events driver (C) Jiri Kosina [ 0.922870] i801_smbus 0000:00:1f.3: SPD Write Disable is set [ 0.923102] usbcore: registered new interface driver usbhid [ 0.923220] i801_smbus 0000:00:1f.3: SMBus using PCI interrupt [ 0.923311] usbhid: USB HID core driver [ 0.923734] i2c i2c-0: 1/4 memory slots populated (from DMI) [ 0.923985] Initializing XFRM netlink socket [ 0.924240] NET: Registered PF_INET6 protocol family [ 0.924840] Segment Routing with IPv6 [ 0.924970] In-situ OAM (IOAM) with IPv6 [ 0.925114] sit: IPv6, IPv4 and MPLS over IPv4 tunneling driver [ 0.925353] NET: Registered PF_PACKET protocol family [ 0.925505] 9pnet: Installing 9P2000 support [ 0.925632] Key type dns_resolver registered [ 0.926363] IPI shorthand broadcast: enabled [ 0.926504] sched_clock: Marking stable (890411649, 35911596)->(1773489654, -847166409) [ 0.927084] registered taskstats version 1 [ 0.927207] Loading compiled-in X.509 certificates [ 0.929866] PM: Magic number: 12:400:31 [ 0.930124] printk: console [netcon0] enabled [ 0.930240] netconsole: network logging started [ 0.930577] cfg80211: Loading compiled-in X.509 certificates for regulatory database [ 0.942454] cfg80211: Loaded X.509 cert 'sforshee: 00b28ddf47aef9cea7' [ 0.942793] cfg80211: Loaded X.509 cert 'wens: 61c038651aabdcf94bd0ac7ff06c7248db18c600' [ 0.943473] cfg80211: loaded regulatory.db is malformed or signature is missing/invalid [ 0.943649] ALSA device list: [ 0.943769] No soundcards found. [ 1.143068] usb 1-1: new high-speed USB device number 2 using ehci-pci [ 1.150942] usb 2-1: new high-speed USB device number 2 using ehci-pci [ 1.158981] usb 3-3: new high-speed USB device number 2 using xhci_hcd [ 1.195798] ata5: SATA link down (SStatus 0 SControl 300) [ 1.195952] ata3: SATA link up 6.0 Gbps (SStatus 133 SControl 300) [ 1.196109] ata6: SATA link down (SStatus 0 SControl 300) [ 1.196253] ata2: SATA link down (SStatus 0 SControl 300) [ 1.196389] ata1: SATA link down (SStatus 0 SControl 300) [ 1.196544] ata4: SATA link down (SStatus 0 SControl 300) [ 1.197214] ata3.00: ATA-10: HGST HUS722T1TALA604, RAGNWA05, max UDMA/133 [ 1.279420] usb 2-1: New USB device found, idVendor=8087, idProduct=8000, bcdDevice= 0.05 [ 1.279573] usb 2-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0 [ 1.279740] usb 1-1: New USB device found, idVendor=8087, idProduct=8008, bcdDevice= 0.05 [ 1.279896] usb 1-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0 [ 1.280196] hub 2-1:1.0: USB hub found [ 1.280338] hub 1-1:1.0: USB hub found [ 1.280460] hub 2-1:1.0: 4 ports detected [ 1.280668] hub 1-1:1.0: 4 ports detected [ 1.283690] ata3.00: 1953525168 sectors, multi 16: LBA48 NCQ (depth 32), AA [ 1.283820] ata3.00: Features: NCQ-sndrcv NCQ-prio [ 1.286436] usb 3-3: New USB device found, idVendor=05e3, idProduct=0610, bcdDevice=32.98 [ 1.286591] usb 3-3: New USB device strings: Mfr=0, Product=1, SerialNumber=0 [ 1.286715] usb 3-3: Product: USB2.0 Hub [ 1.287511] hub 3-3:1.0: USB hub found [ 1.287963] hub 3-3:1.0: 4 ports detected [ 1.311676] ata3.00: configured for UDMA/133 [ 1.312096] scsi 2:0:0:0: Direct-Access ATA HGST HUS722T1TAL WA05 PQ: 0 ANSI: 5 [ 1.312675] sd 2:0:0:0: Attached scsi generic sg0 type 0 [ 1.312764] sd 2:0:0:0: [sda] 1953525168 512-byte logical blocks: (1.00 TB/932 GiB) [ 1.313031] sd 2:0:0:0: [sda] Write Protect is off [ 1.313153] sd 2:0:0:0: [sda] Mode Sense: 00 3a 00 00 [ 1.313222] sd 2:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 1.313458] sd 2:0:0:0: [sda] Preferred minimum I/O size 512 bytes [ 1.332864] sda: sda1 sda2 < sda5 > [ 1.333294] sd 2:0:0:0: [sda] Attached SCSI disk [ 1.334497] Freeing unused kernel image (initmem) memory: 1576K [ 1.334625] Write protecting the kernel read-only data: 22528k [ 1.352645] Freeing unused kernel image (text/rodata gap) memory: 2032K [ 1.353932] Freeing unused kernel image (rodata/data gap) memory: 1568K [ 1.404958] usb 3-4: new high-speed USB device number 3 using xhci_hcd [ 1.531240] usb 3-4: New USB device found, idVendor=0557, idProduct=7000, bcdDevice= 0.00 [ 1.531393] usb 3-4: New USB device strings: Mfr=0, Product=0, SerialNumber=0 [ 1.532071] hub 3-4:1.0: USB hub found [ 1.532287] hub 3-4:1.0: 4 ports detected [ 1.594954] usb 3-3.2: new high-speed USB device number 4 using xhci_hcd [ 1.672387] usb 3-3.2: New USB device found, idVendor=05e3, idProduct=0610, bcdDevice=32.98 [ 1.672537] usb 3-3.2: New USB device strings: Mfr=0, Product=1, SerialNumber=0 [ 1.672682] usb 3-3.2: Product: USB2.0 Hub [ 1.673377] hub 3-3.2:1.0: USB hub found [ 1.673826] hub 3-3.2:1.0: 4 ports detected [ 1.816179] x86/mm: Checked W+X mappings: passed, no W+X pages found. [ 1.816305] Run /init as init process [ 1.816415] with arguments: [ 1.816416] /init [ 1.816418] placeholder [ 1.816419] with environment: [ 1.816420] HOME=/ [ 1.816421] TERM=linux [ 1.824957] usb 3-4.1: new low-speed USB device number 5 using xhci_hcd [ 1.929367] usb 3-4.1: New USB device found, idVendor=0557, idProduct=2419, bcdDevice= 1.00 [ 1.929527] usb 3-4.1: New USB device strings: Mfr=0, Product=0, SerialNumber=0 [ 1.935287] input: HID 0557:2419 as /devices/pci0000:00/0000:00:14.0/usb3/3-4/3-4.1/3-4.1:1.0/0003:0557:2419.0001/input/input2 [ 1.987278] hid-generic 0003:0557:2419.0001: input,hidraw0: USB HID v1.00 Keyboard [HID 0557:2419] on usb-0000:00:14.0-4.1/input0 [ 1.990181] input: HID 0557:2419 as /devices/pci0000:00/0000:00:14.0/usb3/3-4/3-4.1/3-4.1:1.1/0003:0557:2419.0002/input/input3 [ 1.990484] hid-generic 0003:0557:2419.0002: input,hidraw1: USB HID v1.00 Mouse [HID 0557:2419] on usb-0000:00:14.0-4.1/input1 [ 2.267022] ixgbe: Intel(R) 10 Gigabit PCI Express Network Driver [ 2.267176] ixgbe: Copyright (c) 1999-2016 Intel Corporation. [ 2.267767] ACPI Warning: \_SB.PCI0.BR2C._PRT: Return Package has no elements (empty) (20220331/nsprepkg-94) [ 2.268760] xen: registering gsi 16 triggering 0 polarity 1 [ 2.268776] Already setup the GSI :16 [ 2.271494] igb: Intel(R) Gigabit Ethernet Network Driver [ 2.271654] igb: Copyright (c) 2007-2014 Intel Corporation. [ 2.271936] xen: registering gsi 16 triggering 0 polarity 1 [ 2.271946] Already setup the GSI :16 [ 2.299141] pps pps0: new PPS source ptp0 [ 2.299324] igb 0000:07:00.0: added PHC on eth0 [ 2.299458] igb 0000:07:00.0: Intel(R) Gigabit Ethernet Network Connection [ 2.299579] igb 0000:07:00.0: eth0: (PCIe:2.5Gb/s:Width x1) 0c:c4:7a:9f:87:be [ 2.299744] igb 0000:07:00.0: eth0: PBA No: 010C00-000 [ 2.299859] igb 0000:07:00.0: Using MSI-X interrupts. 4 rx queue(s), 4 tx queue(s) [ 2.300133] xen: registering gsi 17 triggering 0 polarity 1 [ 2.300142] Already setup the GSI :17 [ 2.329661] pps pps1: new PPS source ptp1 [ 2.329894] igb 0000:08:00.0: added PHC on eth1 [ 2.330040] igb 0000:08:00.0: Intel(R) Gigabit Ethernet Network Connection [ 2.330162] igb 0000:08:00.0: eth1: (PCIe:2.5Gb/s:Width x1) 0c:c4:7a:9f:87:bf [ 2.330326] igb 0000:08:00.0: eth1: PBA No: 010000-000 [ 2.330442] igb 0000:08:00.0: Using MSI-X interrupts. 4 rx queue(s), 4 tx queue(s) [ 2.330681] xen: registering gsi 16 triggering 0 polarity 1 [ 2.330689] Already setup the GSI :16 [ 2.389012] igb 0000:0b:00.0: added PHC on eth2 [ 2.389150] igb 0000:0b:00.0: Intel(R) Gigabit Ethernet Network Connection [ 2.389271] igb 0000:0b:00.0: eth2: (PCIe:5.0Gb/s:Width x4) 0c:c4:7a:9f:87:c0 [ 2.389474] igb 0000:0b:00.0: eth2: PBA No: 010000-000 [ 2.389589] igb 0000:0b:00.0: Using MSI-X interrupts. 8 rx queue(s), 8 tx queue(s) [ 2.389817] xen: registering gsi 17 triggering 0 polarity 1 [ 2.389825] Already setup the GSI :17 [ 2.447729] igb 0000:0b:00.1: added PHC on eth3 [ 2.447868] igb 0000:0b:00.1: Intel(R) Gigabit Ethernet Network Connection [ 2.448001] igb 0000:0b:00.1: eth3: (PCIe:5.0Gb/s:Width x4) 0c:c4:7a:9f:87:c1 [ 2.448204] igb 0000:0b:00.1: eth3: PBA No: 010000-000 [ 2.448333] igb 0000:0b:00.1: Using MSI-X interrupts. 8 rx queue(s), 8 tx queue(s) [ 2.448585] xen: registering gsi 18 triggering 0 polarity 1 [ 2.448593] Already setup the GSI :18 [ 2.506633] igb 0000:0b:00.2: added PHC on eth4 [ 2.506775] igb 0000:0b:00.2: Intel(R) Gigabit Ethernet Network Connection [ 2.506897] igb 0000:0b:00.2: eth4: (PCIe:5.0Gb/s:Width x4) 0c:c4:7a:9f:87:c2 [ 2.507122] igb 0000:0b:00.2: eth4: PBA No: 010000-000 [ 2.507238] igb 0000:0b:00.2: Using MSI-X interrupts. 8 rx queue(s), 8 tx queue(s) [ 2.507477] xen: registering gsi 19 triggering 0 polarity 1 [ 2.507487] Already setup the GSI :19 [ 2.564750] igb 0000:0b:00.3: added PHC on eth5 [ 2.564898] igb 0000:0b:00.3: Intel(R) Gigabit Ethernet Network Connection [ 2.565037] igb 0000:0b:00.3: eth5: (PCIe:5.0Gb/s:Width x4) 0c:c4:7a:9f:87:c3 [ 2.565242] igb 0000:0b:00.3: eth5: PBA No: 010000-000 [ 2.565358] igb 0000:0b:00.3: Using MSI-X interrupts. 8 rx queue(s), 8 tx queue(s) [ 2.567670] igb 0000:07:00.0 enx0cc47a9f87be: renamed from eth0 [ 2.578392] igb 0000:08:00.0 enx0cc47a9f87bf: renamed from eth1 [ 2.588211] igb 0000:0b:00.1 enx0cc47a9f87c1: renamed from eth3 [ 2.596175] igb 0000:0b:00.0 enx0cc47a9f87c0: renamed from eth2 [ 2.609204] igb 0000:0b:00.2 enx0cc47a9f87c2: renamed from eth4 [ 2.617397] igb 0000:0b:00.3 enx0cc47a9f87c3: renamed from eth5 [ 3.005526] ixgbe 0000:04:00.0: Multiqueue Enabled: Rx Queue count = 8, Tx Queue count = 8 XDP Queue count = 0 [ 3.134068] ixgbe 0000:04:00.0: MAC: 5, PHY: 0, PBA No: 020B00-000 [ 3.134258] ixgbe 0000:04:00.0: 0c:c4:7a:9f:8f:b6 [ 3.426779] ixgbe 0000:04:00.0: Intel(R) 10 Gigabit Network Connection [ 3.427235] ACPI Warning: \_SB.PCI0.BR2C._PRT: Return Package has no elements (empty) (20220331/nsprepkg-94) [ 3.427473] xen: registering gsi 17 triggering 0 polarity 1 [ 3.427484] Already setup the GSI :17 [ 4.166774] ixgbe 0000:04:00.1: Multiqueue Enabled: Rx Queue count = 8, Tx Queue count = 8 XDP Queue count = 0 [ 4.296797] ixgbe 0000:04:00.1: MAC: 5, PHY: 0, PBA No: 020B00-000 [ 4.297005] ixgbe 0000:04:00.1: 0c:c4:7a:9f:8f:b7 [ 4.586880] ixgbe 0000:04:00.1: Intel(R) 10 Gigabit Network Connection [ 4.589202] ixgbe 0000:04:00.1 enx0cc47a9f8fb7: renamed from eth1 [ 4.597391] ixgbe 0000:04:00.0 enx0cc47a9f8fb6: renamed from eth0 [ 5.010217] EXT4-fs (dm-0): mounting ext3 file system using the ext4 subsystem [ 5.017560] EXT4-fs (dm-0): mounted filesystem with ordered data mode. Quota mode: none. [ 8.880045] EXT4-fs (dm-0): re-mounted. Quota mode: none. [ 9.876426] EXT4-fs (sda1): mounting ext3 file system using the ext4 subsystem [ 9.894831] EXT4-fs (sda1): mounted filesystem with ordered data mode. Quota mode: none. [ 9.973130] Adding 1949692k swap on /dev/mapper/debina0--vg-swap_1. Priority:-2 extents:1 across:1949692k [ 11.539812] xenbr0: port 1(enx0cc47a9f87be) entered blocking state [ 11.540007] xenbr0: port 1(enx0cc47a9f87be) entered disabled state [ 11.540194] device enx0cc47a9f87be entered promiscuous mode [ 15.052604] igb 0000:07:00.0 enx0cc47a9f87be: igb: enx0cc47a9f87be NIC Link is Up 1000 Mbps Full Duplex, Flow Control: RX [ 15.157372] IPv6: ADDRCONF(NETDEV_CHANGE): enx0cc47a9f87be: link becomes ready [ 15.157593] xenbr0: port 1(enx0cc47a9f87be) entered blocking state [ 15.157716] xenbr0: port 1(enx0cc47a9f87be) entered forwarding state [ 15.158008] IPv6: ADDRCONF(NETDEV_CHANGE): xenbr0: link becomes ready